FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford Tractor Hydraulic

Click here to see parts by model

Ford Hydraulic Pump - This New Ford Hydraulic Pump is used in 3230, 3420, 3930, 4130, 4630, 4830, 5030 tractors with Synchronized Transmissions. It replaces 83987329, E9NN600BC (Item #: 119380, Ref. E9NN600BC) $631.40

No
Picture
Ford Hydraulic Pump - This is a new Ford Hydraulic Pump. It is used on 8x8 transmission, transmission mounted, with 3 point lift, with Relief Valve start year: 12\01\1988. It is used on 250C, 260C, 345C, 345D, 445C, 445D, 545C, 545D. It replaces original part numbers 83962224, E8NN600AA. (Item #: 157622, Ref. E8NN600AA) $419.98

$photo of This is a New Auxiliary Hydraulic Pump used on 5640, 6640, 7740, 7840, 8240, 8340, LB115 Indust\Const, TS100, TS110, TS115, TS90$
Ford Hydraulic Pump, Auxilliary - This is a New Auxiliary Hydraulic Pump used on 5640, 6640, 7740, 7840, 8240, 8340, LB115 Indust\Const, TS100, TS110, TS115, TS90 (Item #: 157633, Ref. F0NN600AA) $339.00

Ford Hydraulic Pump Valve Assembly - Hydraulic Pump Valve Assembly fits 4 cylinder Ford Tractors built between 1954 and 1964. For the following models: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110 4 cylinder, 4120, 4121, 4130 4 cylinder, 4131, 4140 4 cylinder, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAB. It replaces original part numbers 86512642 and NCA638C. (Item #: 178920, Ref. NCA638C) $132.00

Ford Hydraulic Pump Repair Kit - Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Item #: 111682, Ref. CCPN600AB) $55.00

$photo of For tractor models 3000, 4000 (Except 4110) with 5.6 GPM Piston Type Pump 1965 and up. Contains springs, balls, gaskets and seals. Services C5NN600AA pump. Does not include Plate\Plate Assembly. Replaces: YTO FHPK600-5, 81815246, 81821210, 83908690, C5NN600A, C5NN600AA, C5NN600AB, C7NN600Y, CKPN600A, D4NN600A, D6NN600A, D6NN600B$
Ford Hydraulic Pump Repair Kit - For tractor models 3000, 4000 (Except 4110) with 5.6 GPM Piston Type Pump 1965 and up. Contains springs, balls, gaskets and seals. Services C5NN600AA pump. Does not include Plate\Plate Assembly. Replaces: YTO FHPK600-5, 81815246, 81821210, 83908690, C5NN600A, C5NN600AA, C5NN600AB, C7NN600Y, CKPN600A, D4NN600A, D6NN600A, D6NN600B (Item #: 183463) $32.30

Ford Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Item #: 111681, Ref. NCA966E) $74.00

Ford Hydraulic Pump Shaft - Wobble Shaft. For tractor models 2000, 3000, 4000, 2600, 3600, 4600 With Piston Type Pump, 1965 AND ABOVE WITH 6 Inch THREADED SHAFT. (Item #: 155295, Ref. C5NN966A) $84.00

Ford Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Item #: 178969, Ref. C0NN858A) $46.50

Ford Hydraulic Pump Overhaul Kit - For 8N, 9N, 2N (1939-52). Kit contains cam blocks, pistons, chamber kits, PTO shaft bushing, safety valve, and gaskets. (Item #: 118572, Ref. HPOK1) $165.20

Ford Piston for Hydraulic Pump - For 8N, 9N, 2N (1939-52). (Item #: 170925, Ref. 9N615) $26.30

Ford Hydraulic Lift Cylinder - For 8N, 9N, 2N. Hydraulic Lift Cylinder. Cylinder only. Can use 3 ring piston or o-ring type. Sold seperately. (Item #: 111928, Ref. 9N510D) $73.00

Ford Hydraulic Lift Cover Repair Kit - For 8N, 9N, 2N. Lift Cover Repair Gasket Kit. Gasket Set includes 2 valve chamber gaskets, lift cover gasket, piston o-ring, back up washer, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Item #: 113537, Ref. LCRK928) $9.60

$photo of Hydraulic Pump Kit for various loaders mounted on Ford tractors. Pump specifications: 14 GPM at 2000 RPM, 3\4 inch round shaft with key, left hand rotation, inlet port 1 inch NPT, outlet port 3\4 inch NPT. Kit includes hydraulic pump, foot\flange bracket, 2 mounting bolts and washers, and 2 adapters. Replaces 3660.$
Ford Superior and Wagner Loader Hydraulic Pump Kit - Hydraulic Pump Kit for various loaders mounted on Ford tractors. Pump specifications: 14 GPM at 2000 RPM, 3\4 inch round shaft with key, left hand rotation, inlet port 1 inch NPT, outlet port 3\4 inch NPT. Kit includes hydraulic pump, foot\flange bracket, 2 mounting bolts and washers, and 2 adapters. Replaces 3660. (Item #: 178897, Ref. L827-10X) $1039.01

Ford Hydraulic Valve Spring, Intake - Hydraulic Intake Valve Spring is goes between the pump control valve and the bushing. Ford 1939-1952. It replaces original part number 8N697 (Item #: 183685, Ref. 8N697) $5.60

$photo of Hydraulic Lift Yoke Pin is 3\4 inch x 9 7\8 inch and is used on Ford 8N 1948-1949. It replaces 8N486A.$
Ford Hydraulic Lift Yoke Pin - Hydraulic Lift Yoke Pin is 3\4 inch x 9 7\8 inch and is used on Ford 8N 1948-1949. It replaces 8N486A. (Item #: 183424, Ref. 8N486A) $57.00

Ford Hydraulic Pump Gasket - This gasket is used to mount Engine Mounted Hydraulic Pumps on many Ford Tractors, including E1NN600AB Pump. Replaces original part numbers 83948101, E4NN911AA. (Item #: 162462, Ref. E4NN911AA) $2.00

No
Picture
Ford Hydraulic Ram Arm - DUPLICATE....USE NCA545B...��. Replaces OEM# NCA545B. For 600, 700, 800, 900, 2000, 4000 4-cylinder. Does not work with Industrial models. (Item #: 161833, Ref. R0606) $80.00

$photo of For tractor models 4000, 4500, 535, 550. 13 Splined, 7\8 inch shaft. Verify OEM part number to ensure proper fit. 5-3\4 center to center bolt pattern. 4 inch flange. Uses flange mount for hoses. 4 Threaded holes either side of body at ports. Replaces D1NN600C.$
Ford Hydraulic Pump - For tractor models 4000, 4500, 535, 550. 13 Splined, 7\8 inch shaft. Verify OEM part number to ensure proper fit. 5-3\4 center to center bolt pattern. 4 inch flange. Uses flange mount for hoses. 4 Threaded holes either side of body at ports. Replaces D1NN600C. (Item #: 163305, Ref. D1NN600B) $792.44

Ford Hydraulic Valve Assembly - This version does NOT have a slot in the round end. For (9N with 9N600 Pump Assembly), (2N with 9N600 Pump Assembly 1939-1947). Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Item #: 110908, Ref. 9N640) $18.50

Ford Hydraulic Pump Safety Valve - For (4000, 5000, 7000), (Major, Super Major, Power Major all 1952-1964. Hydraulic Pump Safety Valve. (Item #: 170946, Ref. E1ADDN984) $44.20

Ford Hydraulic Lift Cover Repair Kit - For NAA 1953-54, Jubilee. Lift Cover Repair Gasket Kit. The kit contains (2) NAA552A gaskets, (1) NAA553B gasket, (1) NAA473A backup washer, (1) NAA502A gasket, (1) NAA533A piston O-ring, (1) 44R011 O-ring, (1) 44R112 O-ring, (1) 44R113 O-ring, (1) 44R114 O-ring. (Item #: 150635, Ref. LCRK5354) $8.50

Ford Hydraulic Lift Cover Repair Kit - For tractors 2000, 2110LCG, 2600, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4110LCG, 4400, 4500. all 1965 and up, with 3 inch Lift Cylinder. Lift Cover Repair Gasket Kit. Replaces 83963584, 86900100, 87111S95, C0NNB999A, C5NN502A, D1NN473C, E7NN502AA, NCA473A (Item #: 173885, Ref. LCRK65UP) $10.90

$photo of Hydraulic Lift Ram Arm fit the 8N, 9N, 2N. This part will work for the 9N, 2N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and\or shortening one end 1\4 inch and adjusting with shims.$
Ford Hydraulic Lift Ram Arm - Hydraulic Lift Ram Arm fit the 8N, 9N, 2N. This part will work for the 9N, 2N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and\or shortening one end 1\4 inch and adjusting with shims. (Item #: 111326, Ref. 8N545B) $71.00

Ford Hydraulic Pump - For 3550, 4000 from 1965 with transmission mounted pump. Hydraulic Pump. D0NN600F, C7NN600E, C7NN600N, 81824183 (Item #: 104246, Ref. D0NN600F) $425.00

Ford Hydraulic Pump - For tractor models 5000, 5100, 5200, 7000, 7100, 7200. ALL with Dual Power. (Item #: 119383, Ref. D2NN600B) $474.00

Ford Hydraulic Pump - Fits 5000, 5100, 5200, 7000, 7100, 7200 all 1965-1975 with transmission mounted pump. Hydraulic Pump. Gear style unit, trans mount, less dual power. 28 GPM at 2000 RPM. (Item #: 104226, Ref. D0NN600G) $375.01

Ford Hydraulic Pump - Fits the following tractors (less Synchro Transmission) using Transmission Mounted Pump with Relief Valve: 4600, 2810, 2910, 3900, 3910, 4100, 4110, 4610, 3230, 3400, 3430, 3930, 4130, 4630, 4830, 5030, 250C, 260C, 340A, 340B, 345C, 345D, 420, 455A, 445S, 445D, 515, 532, 535, 540A, 540B, 545A, 54C, 545D. Uses D4NN915A Gasket, not included. Replaces 83936585, D8NN600LB, D3NN600B, D6NN600E, D8NN600LA, D8NN600LB-E, D8NN600LBV, VPK1016, 81836736, 83908243, 83926104, 83936585 (Item #: 104254, Ref. D8NN600LB) $376.00

Ford Hydraulic Pump - For tractor models 5100, 5600, 5610, 6600, 6610, 6710, 7100, 7600, 7610, 7700, 7710, 7810, 7910, 8210, all with transmission mounted, Gear Type Pump. Also replaces E0NN600AB. Hydraulic Pump. (Item #: 103150, Ref. E0NN600AC) $399.00

Ford Hydraulic Lift Ram Arm - For NAA, Jubilee. (Item #: 179756, Ref. NAA545A) $95.00

Ford Hydraulic Lift Ram Arm - For 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. All before 1965 and with 4 cylinder engines. (Item #: 161833, Ref. NCA545B) $80.00

Ford Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Item #: 114032, Ref. 9N543B) $52.00

Ford Hydraulic Lift Level Indicator (Dip Stick) - 8N, 9N, 2N, NAA. Hydraulic Lift Level Indicator. (Item #: 111308, Ref. NAA927C) $5.60

Ford Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Item #: 155017, Ref. 86563314) $32.40

Ford Hydraulic Pump Rebuild Kit, Comprehensive - For tractor models 8N, 9N, 2N (1939 to 1952). Kit contains 2 cam blocks, 2 pistons, 2 chamber repair kits, PTO shaft bushing, safety valve, 2 valve chambers with valves, base gasket, sump pump gasket, 2 side gaskets, PTO shaft gasket, 2 side plate gaskets. Note, it may be necessary to grind the opening where the pump fits in some tractors. (Item #: 121926, Ref. S.61725) $316.00

$photo of For tractor models 8N, 9N, 2N. Hydraulic Pump Hub is 3 inches outside diameter, 2 13\32 inches center to center on pins (no holes). Includes pins.$
Ford Hydraulic Pump Hub - For tractor models 8N, 9N, 2N. Hydraulic Pump Hub is 3 inches outside diameter, 2 13\32 inches center to center on pins (no holes). Includes pins. (Item #: 112191, Ref. 191196) $32.00

$photo of Hydraulic Pump Hub is used on tractor models 8N, 9N, 2N. Verify measurements. Hydraulic Pump Hub is 3 3\8 inches outside diameter, 2 3\8 inches center to center on holes. 6 spline - center bore = 5\8 inch on the lands and 3\4 inch on the grooves. Used with part numbers 192160 and 194354.$
Ford Hydraulic Pump Hub - Hydraulic Pump Hub is used on tractor models 8N, 9N, 2N. Verify measurements. Hydraulic Pump Hub is 3 3\8 inches outside diameter, 2 3\8 inches center to center on holes. 6 spline - center bore = 5\8 inch on the lands and 3\4 inch on the grooves. Used with part numbers 192160 and 194354. (Item #: 111173, Ref. 192161) $45.10

$photo of This is a Gear Type Pump. It will mount to the engine in the same location as a Piston Style Pump, but the hydraulic lines will have to be changed. For tractor models: 231, 233, 333, 531, 2600, 3600 1975-1981, 234, 2310, 2610, 3610 1981-3\1983, 5610, 6610, 6710, 7610, 7710 1981-9\1985, 7210, 8210 1982-10\1991, TW5, TW15, TW25, TW35, all with Engine Mounted Pump. (3500, 3350, 4400, 4500, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4200, 4330, 4340, all 1965 to 9\1969 w\ Ind PTO). Uses E4NN911AA gasket, not included. Used with filter D6NNB486A with vertical exhaust or D8NNB486EA with horizontal exhaust. Hydraulic Pump also replaces 83996272, 83996336, E1NN600AA, E1NN600AB, E2NN600AB, C5NN600AA, D3NN600A, D3NN600H, D4NN600B, ESL11276, E1NN600AA-E, E1NN600AB, VPK1014, 81836735, 81844738, 83900640, 83928509, 83996272. YTO E1NN600AB$
Ford Hydraulic Pump - This is a Gear Type Pump. It will mount to the engine in the same location as a Piston Style Pump, but the hydraulic lines will have to be changed. For tractor models: 231, 233, 333, 531, 2600, 3600 1975-1981, 234, 2310, 2610, 3610 1981-3\1983, 5610, 6610, 6710, 7610, 7710 1981-9\1985, 7210, 8210 1982-10\1991, TW5, TW15, TW25, TW35, all with Engine Mounted Pump. (3500, 3350, 4400, 4500, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4200, 4330, 4340, all 1965 to 9\1969 w\ Ind PTO). Uses E4NN911AA gasket, not included. Used with filter D6NNB486A with vertical exhaust or D8NNB486EA with horizontal exhaust. Hydraulic Pump also replaces 83996272, 83996336, E1NN600AA, E1NN600AB, E2NN600AB, C5NN600AA, D3NN600A, D3NN600H, D4NN600B, ESL11276, E1NN600AA-E, E1NN600AB, VPK1014, 81836735, 81844738, 83900640, 83928509, 83996272. YTO E1NN600AB (Item #: 155909) $375.51

Ford Hydraulic Pump - For tractor models 5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 with transmission mounted Gear Type Pump. (Item #: 104228, Ref. D8NN600KA) $481.00

Ford Hydraulic Pump - For tractor models 5640, 6640, 7740, 7840, 8240, 8340 all with transmission mounted, gear type pump. Replaces 73402660, 81871528, 82983657, 87540839, 87540982, F0NN600BBGV, and K81871528. (Item #: 104220, Ref. F0NN600BB) $510.00

Ford Hydraulic Pump - For tractor models TW10, TW20 1979-1982, TW5, TW15, TW20. Hydraulic Pump, transmission mounted pump. (Item #: 104239, Ref. D8NN600FA) $295.00

Ford Hydraulic Pump - For tractor models 8530, 8630, 8730, 8830, TW5, TW10, TW25, TW30, TW35. Hydraulic Pump, transmission mounted. (Item #: 115518, Ref. E2NN600BA) $291.00

$photo of For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7\16 inch-20 X 11\16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR].$
Ford Hydraulic Lift Shaft - For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7\16 inch-20 X 11\16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Item #: 165431, Ref. NCA544B) $419.08

Ford Hydraulic Lift Piston O-Ring - For 8N, 9N, 2N. O-Ring used on piston part number NAA530B. Price is for each. Used with Lift Piston Washer part number NAA473A. NOTE: The leather washer goes on first, then the o-ring. (Item #: 116071, Ref. NAA533A) $1.70

Ford Hydraulic Lift Piston Washer - For 9N, 8N, 2N. Hydraulic Lift Piston Washer used with Piston part number NAA530B. Price is for each. (Item #: 112216, Ref. NAA473A) $3.50

$photo of APPLICATION: 8N, 9N, 2N, SHAFT DIAMETER: 3\4 Inch, SHAFT OVERALL LENGTH: 13-1\16 InchES, END A TYPE: KEY, END A SIZE: 3\4 Inch, END B TYPE: LEFT HAND THREAD, END B SIZE: 5\8 Inch. END A mates to coupler L601-14. END B mates to hub 191196.$
Ford Hydraulic Pump Drive Shaft - APPLICATION: 8N, 9N, 2N, SHAFT DIAMETER: 3\4 Inch, SHAFT OVERALL LENGTH: 13-1\16 InchES, END A TYPE: KEY, END A SIZE: 3\4 Inch, END B TYPE: LEFT HAND THREAD, END B SIZE: 5\8 Inch. END A mates to coupler L601-14. END B mates to hub 191196. (Item #: 112199, Ref. 190760) $23.10

$photo of For tractor models 8N, 9N, 2N. 3\4 inch shaft diameter, 13 inches in length, 6 spline on one end and .187 inch keyway on other end. Mates with end hub 192161 or 54C2055. Other end mates with coupler L601-14.$
Ford Hydraulic Pump Drive Shaft - For tractor models 8N, 9N, 2N. 3\4 inch shaft diameter, 13 inches in length, 6 spline on one end and .187 inch keyway on other end. Mates with end hub 192161 or 54C2055. Other end mates with coupler L601-14. (Item #: 111595, Ref. 194354) $31.90

Ford Hydraulic Safety Valve Assembly - For tractor models 8N, 9N, 2N. Mounts on the hydraulic pump on 2N, 8N, 9N. **Note: The part you receive may look different than pictured, but will fit and work the same. Replaces: 8N638. (Item #: 113392, Ref. 8N638) $16.98

Ford Hydraulic Relief Valve - For tractor models 2000, 3000, 4000, 5000, 6000 (1965-1975). This valve is for piston or gear type in center housing. Replaces C7NN638E, 81818413 (Item #: 157746, Ref. C7NN638E) $52.00

No
Picture
Ford Hydraulic Ram Arm - For 8N (Item #: 111326, Ref. R0603) $71.00

$photo of For tractor models: 335, 340, 3400, 340A, 340B, 4400, 515, 532, 535, 540, 730. Hub. 5-1\4 inch overall diameter, 4 mounting holes 7\16 inch diameter, smooth type, 3-7\8 inch spacing. 1-9\16 inch relief diameter, 3\4 inch depth. 13 spline center bore, 7\8 inch diameter. This pump has 13 splines and is NOT threaded. Used with 291951, 292222, 7701044 pump shaft. Replaces 86509731, C5NNN879A. Used with 291315 and on some crankshaft pulleys. Measure crankshaft pulley before ordering.$
Ford Hydraulic Pump Hub - For tractor models: 335, 340, 3400, 340A, 340B, 4400, 515, 532, 535, 540, 730. Hub. 5-1\4 inch overall diameter, 4 mounting holes 7\16 inch diameter, smooth type, 3-7\8 inch spacing. 1-9\16 inch relief diameter, 3\4 inch depth. 13 spline center bore, 7\8 inch diameter. This pump has 13 splines and is NOT threaded. Used with 291951, 292222, 7701044 pump shaft. Replaces 86509731, C5NNN879A. Used with 291315 and on some crankshaft pulleys. Measure crankshaft pulley before ordering. (Item #: 112192, Ref. C5NNN879A) $54.00

No
Picture
Ford Hydraulic Pump Assembly - Pump, Hydraulic For 701 LOADER, 702 LOADER, 703 LOADER. Kit consists of 2 bolt flange mount pump, a removeable 2 bolt foot mount bracket, 2 mounting bolts and washers and 2 adapters. 14gpm at 2000rpm capacity. 3\4 shaft diameter, round with key type. Left-hand rotation, combo mounting. (Item #: 178897, Ref. 192504) $1039.01

$photo of Hydraulic pump shaft. 3\4 inch diameter, 9-1\4 inch overall length. End A type: key, 3\4 inch size, End B type: 6 spline, 3\4 inch size. Associated components end A flex. coupler: L601-14 (3\4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840.$
Ford Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3\4 inch diameter, 9-1\4 inch overall length. End A type: key, 3\4 inch size, End B type: 6 spline, 3\4 inch size. Associated components end A flex. coupler: L601-14 (3\4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Item #: 112068, Ref. 194355) $28.10

$photo of Hydraulic pump kit for 701, 702, and late 703 loaders. Consists of 2 bolt flange mount pump, a removable 2 bolt foot mount bracket, 2 mounting bolts and washers and 2 adapters. 14 gpm at 2000 rpm capacity. Shaft: 3\4 inch diameter, round with key type. Left-hand rotation, combo mounting. SPECS: CAPACITY GPM at RPM: 14 at 2000, SHAFT DIAMETER: 3\4 inch, SHAFT TYPE: Round with key, ROTATION: Left hand, PORT SIZE INLET: 1 inch NPT, PORT SIZE OUTLET: 3\4 inch NPT, MOUNTING: 2 bolt SAE A , FORD PUMP APPLICATION: 701, 702, late 703 loader. CAPACITY GPM at RPM: 14 @2000, SHAFT DIAMETER: 3\4 inch, SHAFT TYPE: Round with key, ROTATION: Left hand, MOUNTING: Combo, INLET: 1 inch NPT, OUTLET: 3\4 inch NPT. Replaces 195453$
Ford Hydraulic Pump Assembly for Loader - Hydraulic pump kit for 701, 702, and late 703 loaders. Consists of 2 bolt flange mount pump, a removable 2 bolt foot mount bracket, 2 mounting bolts and washers and 2 adapters. 14 gpm at 2000 rpm capacity. Shaft: 3\4 inch diameter, round with key type. Left-hand rotation, combo mounting. SPECS: CAPACITY GPM at RPM: 14 at 2000, SHAFT DIAMETER: 3\4 inch, SHAFT TYPE: Round with key, ROTATION: Left hand, PORT SIZE INLET: 1 inch NPT, PORT SIZE OUTLET: 3\4 inch NPT, MOUNTING: 2 bolt SAE A , FORD PUMP APPLICATION: 701, 702, late 703 loader. CAPACITY GPM at RPM: 14 @2000, SHAFT DIAMETER: 3\4 inch, SHAFT TYPE: Round with key, ROTATION: Left hand, MOUNTING: Combo, INLET: 1 inch NPT, OUTLET: 3\4 inch NPT. Replaces 195453 (Item #: 178897, Ref. L827-10X) $1039.01

$photo of Shaft is 3\4 inch diameter, 9-3\8 inches overall length. End A type: key, 3\4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3\4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000.$
Ford Hydraulic Pump Drive Shaft - Shaft is 3\4 inch diameter, 9-3\8 inches overall length. End A type: key, 3\4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3\4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Item #: 111747, Ref. 195454) $39.00

$photo of APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3\4 , SHAFT OVERALL LENGTH: 8-3\8 , END A TYPE: Key, END A SIZE: 3\4 , END B TYPE: 10 Spline, END B SIZE: 1 .$
Ford Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3\4 , SHAFT OVERALL LENGTH: 8-3\8 , END A TYPE: Key, END A SIZE: 3\4 , END B TYPE: 10 Spline, END B SIZE: 1 . (Item #: 172481, Ref. 197118) $41.30

$photo of For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7\16 inches in diameter, smooth type, 2-3\4 inch spacing. 1-3\8 inch relief diameter, 9\16 inch depth, 10 spline, 1 inch center bore. Normally used with shaft part number 195454 and can be used with shaft 197118. For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA.$
Ford Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7\16 inches in diameter, smooth type, 2-3\4 inch spacing. 1-3\8 inch relief diameter, 9\16 inch depth, 10 spline, 1 inch center bore. Normally used with shaft part number 195454 and can be used with shaft 197118. For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Item #: 112100, Ref. 290421) $43.00

$photo of Coupler fits various models and the model 730 Loader. Used with 291951, 292222 and 7701044 pump shafts. Coupler measures 2 3\4 inches center of hole across to center of coupler, is 13 Spline 7\8 dia, shaft and comes 4 Rubber Bushings. Replaces 131693A1. MEASURE CRANKSHAFT PULLEY bolt pattern before ordering, other sizes are are available.$
Ford Hydraulic Pump Drive Coupler - Coupler fits various models and the model 730 Loader. Used with 291951, 292222 and 7701044 pump shafts. Coupler measures 2 3\4 inches center of hole across to center of coupler, is 13 Spline 7\8 dia, shaft and comes 4 Rubber Bushings. Replaces 131693A1. MEASURE CRANKSHAFT PULLEY bolt pattern before ordering, other sizes are are available. (Item #: 111998, Ref. 291061) $44.00

$photo of Shaft, Pump Drive For 730 LOADER. Hydraulic pump shaft. 7\8 inches diameter, 13-5\8 inches overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315.$
Ford Hydraulic Pump Shaft - Shaft, Pump Drive For 730 LOADER. Hydraulic pump shaft. 7\8 inches diameter, 13-5\8 inches overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315. (Item #: 112150, Ref. 291951) $29.20

$photo of Pump Drive For 730 LOADER. Hydraulic pump shaft. 7\8 inch diameter, 10-3\8 inches overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315.$
Ford Hydraulic Pump Drive For 730 Loader - Pump Drive For 730 LOADER. Hydraulic pump shaft. 7\8 inch diameter, 10-3\8 inches overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315. (Item #: 127439, Ref. 292222) $29.60

$photo of Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1\4 x 20.$
Ford Plate Hydraulic lift Control - Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1\4 x 20. (Item #: 111910, Ref. 9N515) $29.90

$photo of Shaft, Pump Drive For 730 LOADER. Shaft is 7\8 inch diameter, 11-5\8 inch overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315.$
Ford Hydraulic Pump Shaft for Loader - Shaft, Pump Drive For 730 LOADER. Shaft is 7\8 inch diameter, 11-5\8 inch overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315. (Item #: 169528, Ref. 7701044) $43.40

Ford Hydraulic Pump Gear - Main gear for piston pump. Center of gear is 6 spline. Replaces NCA908A. For tractor models 2000 4 cylinder, 4000 4 cylinder, 600 Series, 601 Series, 700 Series, 701 Series, 800 Series, 801 Series, 900 Series, 901 Series. Replaces C0NN908A (Item #: 112072, Ref. C3NN908A) $36.10

$photo of Double U-Joint Assembly. 11-5\8 inch overall length. 4 bolt hub on end A, end B has 13 spline, 7\8 inch coupler.$
Ford Hydraulic Pump Drive Shaft - Double U-Joint Assembly. 11-5\8 inch overall length. 4 bolt hub on end A, end B has 13 spline, 7\8 inch coupler. (Item #: 184411, Ref. C5NNA932C) $480.00

Ford Hydraulic Pump - Hydraulic Pump, Gear Type, mounted in Center Housing. For tractor models 5600, 6600, 6700, 7600, 7700. (Item #: 104228, Ref. D8NN600KB) $481.00

Ford Hydraulic Pump Kit - Minor repair kit for 4.3 gpm piston type pump. For 2000, 4110, both 1965 and up. Services C5NN600-AB pump. (Item #: 183463, Ref. FHPK600-4) $32.30

$photo of Hydraulic Hose with fittings is 26 inches in length. The straight end has 1\2 inch NPT and the 90 degree end has 9\16 inch ORB. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600.$
Ford Hydraulic hose Assembly - Hydraulic Hose with fittings is 26 inches in length. The straight end has 1\2 inch NPT and the 90 degree end has 9\16 inch ORB. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Item #: 179212, Ref. H31-SPL-26) $41.90

Ford Hydraulic cylinder Kit - 3-spool valve and cylinder kit complete. For tractor models 1320, 1520, 1720, 1920, 2120. (Item #: 183440, Ref. HCKF293) $1873.77

$photo of Side link cylinder, Bore Size: 2 inches, Center Tube Length: 8 7\16 inches, Closed Length: 17 1\2 inches, Pin Diameter: 7\8 inches.$
Ford Hydraulic side Link - Side link cylinder, Bore Size: 2 inches, Center Tube Length: 8 7\16 inches, Closed Length: 17 1\2 inches, Pin Diameter: 7\8 inches. (Item #: 180248, Ref. HSL2203) $538.00

Ford Hydraulic top Link - Hydraulic top link cylinder, 2 inch bore. (Item #: 167135, Ref. HTL2102) $268.00

$photo of FORD: Hydraulic top link cylinder. All ports 9\16 inch-18 O-ring boss with two adapters 9\16 inch-18 ORBM x 1\4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7\16 inch barrel length, 1 inch rod end diameter, 1-3\4 inch rod end width, 1 inch diameter base end.$
Ford Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9\16 inch-18 O-ring boss with two adapters 9\16 inch-18 ORBM x 1\4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7\16 inch barrel length, 1 inch rod end diameter, 1-3\4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref. HTL3103) $273.00

Ford Hydraulic Valve Kit - Valve with handle, single-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. (Item #: 184596, Ref. HV4010) $417.00

Ford Hydraulic Valve Kit - Valve, Hydraulic, with handle, Single-Spool Multi-Valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90 degree rotated handle. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 183392, Ref. HV4012) $297.00

Ford Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185318, Ref. HV4021) $728.00

Ford Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

Ford Hydraulic Valve Kit - Kit assembly, includes 1-spool valve with handle. For tractor models 1320, 1520, 1720, 1920, 2120. (Item #: 180001, Ref. HV4118) $794.00

Ford Hydraulic Valve Kit - Kit Assembly, includes 2-Spool Valve with handle. Fits Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Item #: 180002, Ref. HV4120) $1089.01

Ford Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handle (has float on one spool). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. NIS (Item #: 183391, Ref. HV4121) $973.00

Ford Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handles For 1320, 1520, 1720, 1920, 2120. (Item #: 178798, Ref. HV4124) $1369.01

$photo of Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3\8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900.$
Ford Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3\8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Item #: 111565, Ref. HV4902) $89.00

$photo of Hose, hose assembly 1\4 inch NPT male solid.$
Ford Hydraulic hose Assembly - Hose, hose assembly 1\4 inch NPT male solid. (Item #: 179987, Ref. HV4962) $34.70

No
Picture
Ford Hydraulic hose Assembly - Hose, 44 . (Item #: 179992, Ref. HV4977) $41.20

$photo of This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3\8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C$
Ford Hydraulic Lift Shaft Bushing - This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3\8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C (Item #: 173523, Ref. 9N531C) $14.20

Ford Hydraulic Hose Assembly - Hose, 48 inches. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2110, 2120. (Item #: 179697, Ref. HV4959) $22.50

No
Picture
Ford Hydraulic Hose Assembly - Hose, 18. For 1700, 1710, 1900, 1910, 2000, 2110, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Item #: 179990, Ref. HV4970) $33.50

No
Picture
Ford Hydraulic Hose Assembly - Hose, 21. For 1700, 1710, 1900, 1910, 2000, 2110, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Item #: 179991, Ref. HV4971) $34.30

Ford Hydraulic Pump, Transmission Mounted - For tractor models 8000, 8600, 8700, 9000, 9600, 9700, all 1968-1978. Hydraulic Pump, mounts in transmission housing. 16 GPM. Replaces C7NN600D. (Item #: 104232, Ref. D5NN600C) $488.00

$photo of Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7\8 inch outside diameter, 2 3\4 inches center to center on holes. 6 spline center bore, 3\4 inch inside diameter, 7\16 inch smooth ID mounting holes.$
Ford Hydraulic Pump Hub - Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7\8 inch outside diameter, 2 3\4 inches center to center on holes. 6 spline center bore, 3\4 inch inside diameter, 7\16 inch smooth ID mounting holes. (Item #: 111639, Ref. 54C2055) $39.98

Ford Hydraulic Valve O-Ring Kit - Hydraulic Valve Mounting O-Ring Kit. For 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Item #: 163398, Ref. DHPN485A) $8.70

Ford Hydraulic Pump Gasket Kit - Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 182513, Ref. FPN910B) $31.50

Ford Hydraulic Lift Cover Repair Kit - Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All prior to 1965. Kit contains (1) C0NNB999A seal, (1) NCA473A washer, (1) 9N532 gasket, (1) NCA502A gasket and (20) O-rings. Will work for Dexta and Super Dexta if piston has been changed to o-ring and back-up ring style. E11GF9 single groove gland seal is available separately. (Item #: 113538, Ref. LCRK5564) $7.00

Ford Hydraulic Pump Needle Bearing - Needle Bearing Assembly for Pump Housing. For 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. Replaces: 36433, NCA881A (Item #: 123075, Ref. NCA881A) $11.20

Ford Clamp, Double Break-Away, Hydraulic - For use with Pioneer series 4000 and Safeway type S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this clamp. Used on tractors with Single Pump Hydraulic System, 1955 thru 1981 models. For tractor models 500, 600, 700, 800, 900, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 112480, Ref. S42-4) $29.95

$photo of For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1\4 x 20.$
Ford Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1\4 x 20. (Item #: 111910, Ref. 9N515) $29.90

Ford Hydraulic Lift Cylinder Piston - Piston ONLY. Back-up ring NCA473A and o-ring seal 87111S95 are NOT included. This lift cylinder piston is 3 inches in diameter. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 3000, 3600, 4000, Dexta, Super Dexta. Replaces C5NN530B. (Item #: 155015, Ref. C5NN530B) $27.30

No
Picture
Ford Hydraulic Pump - For tractor models 4635, 4835, both with Bosch Type Pump. Hydraulic Pump replaces 517928, 8282886. (Item #: 114267, Ref. 5129486) $145.00

Ford Hydraulic Pump - For tractor models 340, 340A, 340B, 445, 445A, 450, 540. 22 GPM Hydraulic Pump. (Item #: 170419, Ref. D8NN600DA) $775.00

$photo of For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5\16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5\16 inch diameter bolts. NOTE: Early tractors used 1\4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5\16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ).$
Ford Camshaft Hydraulic Pump Drive Gear - For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5\16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5\16 inch diameter bolts. NOTE: Early tractors used 1\4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5\16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Item #: 123501, Ref. EAF907B) $69.00

Ford Hydraulic Lift Ram Arm - Fits the following 3-cylinder engine tractors (1965 and newer): 2000, 3000, 4110LCG. (Item #: 154983, Ref. C5NN545B) $64.30

Ford Hydraulic Filter - This Spin-on type hydraulic filter measures 3.79 inches outside diameter, 6.42 inches long and 1.125 inches inside diameter hole. VERIFY DIMENSIONS. For tractor models: 4100, 2310 with TANDEM MOUNTED PUMPS 1981 THRU 1983, 2600 with GEAR TYPE PUMPS, 2610 with TANDEM MOUNTED PUMPS 1981 THRU 1983, 3600 with GEAR TYPE PUMPS, 3610 with TANDEM MOUNTED PUMPS 1981 THRU 1983, 3910, 4110, 4600, 4610, 5600, 5610 with VERTICAL EXHAUST, 6600, 6610 with VERTICAL EXHAUST, 6700, 6710 with VERTICAL EXHAUST, 7600, 7610 with VERTICAL EXHAUST, 7700, 7710 with VERTICAL EXHAUST. Replaces 83918631, 81836728, 83901265, 47622189, 83912256, 83903433, D3NNB486B, D4NNB486D, F0NNB486AA, D6NNB486A, D3NNB486A, D8NNB486CA, D8NNB486AA, D4NNB486A, 84263773, 81863229, 81844732, 83984236 (Item #: 125956, Ref. D6NNB486A) $16.40

$photo of Steel Mesh Hydraulic Filter replaces OEM number 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3\4 inch tall, 2 1\8 inch Diameter with a 3\4 inch center 3 prong hole. Does not include rubber seals and we do not have them available. YTO C5NNN832B$
Ford Hydraulic Filter, Steel Mesh - Steel Mesh Hydraulic Filter replaces OEM number 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3\4 inch tall, 2 1\8 inch Diameter with a 3\4 inch center 3 prong hole. Does not include rubber seals and we do not have them available. YTO C5NNN832B (Item #: 113711, Ref. C5NNN832B) $10.70

Ford Hydraulic Cover Blocking Plate - Fits 2000, 3000, 3930, 4000, 4100, 4110, 4130, 2600, 3600, 3900, 4600, 4610, 4630, 4830, 5030 INDUSTRIALS: 230A, 231, 233, 234, 333, 334, 335, 530A, 540, 540A, 540B, 545, 545A, 545B, 545C, 545D. (Item #: 158711, Ref. C5NN475B) $42.40

$photo of Fits 5000, (5900 1\85 to 11\87). Less Dual power.$
Ford Hydraulic Strainer and Tube - Fits 5000, (5900 1\85 to 11\87). Less Dual power. (Item #: 151074, Ref. C5NNN994J) $32.80

Ford Hydraulic Pump - Counter clockwise rotation, top port size is 0.560 inch and bottom port size is. 740 inch. Flow is 42 liters per minute. Replaces 1909916, 1930226, 5120850, 5169770, 5113283. For tractor models 4010S, 5010S, 700, 7530, 766DT, 980, TK75, TK85, TK85M. (Item #: 115516, Ref. 5129488) $167.00

Ford Hydraulic Intake, Filter and Pipe Assembly - Replaces C7NNN994D. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500. (Item #: 172884, Ref. C7NNN994B) $57.00

Ford Hydraulic Spring Seat - For tractor models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). Also replaces 181083M1 and 181098M1. (Item #: 182473, Ref. 9N525B) $17.20

Ford Gasket, Hydraulic Pump Drain - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref. 8N7011) $1.70

Ford Hydraulic Lift Piston Rings - Kit of 3, steel, fits piston part number 9N530B. For tractor models 8N, 9N, 2N. (Item #: 113940, Ref. 9N675) $10.80

$photo of Friction Disc for Hydraulic Control Lever, 3 inch diameter, 1\2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each.$
Ford Friction Disc for Hydraulic Control Lever - Friction Disc for Hydraulic Control Lever, 3 inch diameter, 1\2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Item #: 111446, Ref. C5NN518B) $1.80

Ford Hydraulic Lift Lever - For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Item #: 178133, Ref. S.66598) $20.60

Ford Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, less valves. For 8N, 9N, 2N. (Item #: 170905, Ref. 9N622) $72.00

$photo of Hydraulic Lift Yoke Pin measures 1 inch diameter and 3 1\4 inches in length. For tractor models 8N, NAA, Jubilee, (1950-1954).$
Ford Pin, Hydraulic Lift Yoke - Hydraulic Lift Yoke Pin measures 1 inch diameter and 3 1\4 inches in length. For tractor models 8N, NAA, Jubilee, (1950-1954). (Item #: 184042, Ref. 8N486B) $11.50

Ford Hydraulic Pump - 31 liters per minute. Counter-clockwise rotation. For tractor models 3010S, 3435, 3830, 4010S, 4030, 4230, 4330V, 4430, 5010S, 5530, 6530, 7530, 766DT, (980 serial number 708863 and up), TK76, TK85, TK85M. Replaces 5179719, 1930068, 5120849, 8282339, 1901324, 1930052, 1930057, 5120297, 8280127, 5169772, 5113284. (Item #: 113597, Ref. 5129483) $149.00

$photo of Loader\Backhoe, 26 GPM. For tractor models 445, 540, (540A, 555 1\1983 and up), 550. Replace 85700189, D8NN600AA, E7NN600CA$
Ford Hydraulic Pump - Loader\Backhoe, 26 GPM. For tractor models 445, 540, (540A, 555 1\1983 and up), 550. Replace 85700189, D8NN600AA, E7NN600CA (Item #: 172839, Ref. D8NN600AA) $669.00

Ford Hydraulic Wobble Shaft Plate - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Replaces 81813626. (Item #: 172706, Ref. NCA859A) $56.00

Ford Hydraulic Wobble Shaft Plate - For tractor models 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Item #: 172706, Ref. NCA859A) $56.00

Ford Hydraulic Valve Kit, Remote - Has double spool control to activate two double-acting remote hydraulic rams. Kit includes: B8210 diverter valve, control valve, pioneer breakaway kit, hoses and fittings. For DIESEL models: 2000, 3000, 4000, 2600, 3600, 3900, 2610, 3610, 3910, 4110, 4610. (Item #: B91468) $986.70

Ford Hydraulic Pump - For tractor models 4230, 4430. (Item #: 113206, Ref. 5179730) $152.00

Ford Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Item #: 185320, Ref. HV4020) $665.00

Ford Hydraulic Pump Drive Gear - For tractor models 4000, 5000, 7000. (Item #: 172739, Ref. C5NN866A) $57.00

Ford Hydraulic Pump Shaft Bearing Cone - Use with pump shaft C5NN9666A. For tractor models (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Item #: 124563, Ref. CODW4621A) $12.80

Ford Hydraulic Pump Shaft Bearing Cup - Use with pump shaft C5NN9666A. For tractor models (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Item #: 124566, Ref. CODW4616A) $7.20

Ford Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114635, Ref. D5NN1202A) $2.80

Ford Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114636, Ref. D5NN1201A) $6.00

Ford Drive Gear Shroud, Hydraulic Pump - For tractor models (3000, 340, 3900, 4000, 4100, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 4500, 4600, 460NO, 4600SU, 515, 532, 540, 545 all with independant PTO). (Item #: 172659, Ref. C5NNN872A) $34.54

$photo of For tractor models (3000 1\1965 and up), (3600, 4100 1\1975 and up), (3610 from 1\1981 to 12\1982), (4000 3 cyl. 1\1965 and up), (4610 1\1981 and up), 4610SU.$
Ford Hydraulic Lift Rocker - For tractor models (3000 1\1965 and up), (3600, 4100 1\1975 and up), (3610 from 1\1981 to 12\1982), (4000 3 cyl. 1\1965 and up), (4610 1\1981 and up), 4610SU. (Item #: 154051, Ref. E2NN535BA) $124.00

$photo of For tractor models (2000, 4000 from 1965 and up), (2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, (340A prior to 5\1983), 3500, 3600, 3910, 4110, 530A, 531.$
Ford Hydraulic Lift Shaft - For tractor models (2000, 4000 from 1965 and up), (2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, (340A prior to 5\1983), 3500, 3600, 3910, 4110, 530A, 531. (Item #: 170950, Ref. C5NN544D) $155.00

Ford Hydraulic Pump - Engine mounted. For tractor models 2810, 2910, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 340A, 340B, 445A, 540A, 540B, 545A. (Item #: 155909, Ref. E2NN600AB) $375.51

Ford Hydraulic Pump Gear Housing - For tractor models NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 113718, Ref. NCA905C) $224.00

Ford Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, less valves. For tractor models 9N, 8N, 2N. Cast Iron.9N621-C (Item #: 170904, Ref. 9N621) $81.00

$photo of Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5\8 inches-12 ORB, PORT SIZE OUTLET: 1-5\16 inches-12 ORB, MOUNTING: 2 bolt SAE B , FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE B , INLET: 1-5\8 inches-12 ORB, OUTLET: 1-5\16 inches-12 ORB. The 2 bolt mount slots are 9\16 inch and open on the ends. Minimum measurement between the slots are 5 1\4 inches and Maximum is 6 7\8 inches.$
Ford Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5\8 inches-12 ORB, PORT SIZE OUTLET: 1-5\16 inches-12 ORB, MOUNTING: 2 bolt SAE B , FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE B , INLET: 1-5\8 inches-12 ORB, OUTLET: 1-5\16 inches-12 ORB. The 2 bolt mount slots are 9\16 inch and open on the ends. Minimum measurement between the slots are 5 1\4 inches and Maximum is 6 7\8 inches. (Item #: 127269, Ref. 7702425-29Z) $760.00

Ford Hydraulic Pump Valve Chamber Assembly, RH - Right Hand Valve Chamber with valves. For tractor models 9N, 8N, 2N. (Item #: 186797, Ref. 9N621-ASSY) $95.00

Ford Hydraulic Pump Valve Chamber Assembly, LH - Left Hand Valve Chamber with valves. For tractor models 8N, 9N, 2N. Cast Iron. (Item #: 179000, Ref. 9N622-ASSY) $160.72

Ford Hydraulic pump base to center housing Gasket - For tractor models 8N, 9N, 2N. (Item #: 112062, Ref. 9N611) $2.20

$photo of Hydraulic Cylinder Gasket measures 1 inch outside diameter and 7\16 inch inside diameter. For tractor models 8N, 9N, 2N. Priced each.$
Ford Gasket, Hydraulic Cylinder to Center Housing - Hydraulic Cylinder Gasket measures 1 inch outside diameter and 7\16 inch inside diameter. For tractor models 8N, 9N, 2N. Priced each. (Item #: 172822, Ref. 9N552) $0.90

$photo of 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1\4 NPT male brass fitting.$
Ford Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1\4 NPT male brass fitting. (Item #: 184977, Ref. GG300) $11.80

$photo of Universal. 1\2 I.D. double wire braid (SAE-2R) with 1\2 NPT solid male fittings both ends, 36 overall length. Replaces OEM 407436R1.$
Ford Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1\2 I.D. double wire braid (SAE-2R) with 1\2 NPT solid male fittings both ends, 36 overall length. Replaces OEM 407436R1. (Item #: 118260, Ref. H42-2M-36) $15.20

$photo of 21.5 GPM at 2100 RPM, 2200 PSI, left hand rotation, 7\8 inch diameter. 13 tooth shaft, 1-5\16 inch outlet port, 1-5\8 inch inlet port, 2 bolt mount slots are 9\16 inch and open at the ends, minimum measurement between the slots is 5-1\4 inches, maximum is 6-7\8 inches. For tractor models 712, 730, 735.$
Ford Hydraulic Pump - 21.5 GPM at 2100 RPM, 2200 PSI, left hand rotation, 7\8 inch diameter. 13 tooth shaft, 1-5\16 inch outlet port, 1-5\8 inch inlet port, 2 bolt mount slots are 9\16 inch and open at the ends, minimum measurement between the slots is 5-1\4 inches, maximum is 6-7\8 inches. For tractor models 712, 730, 735. (Item #: 127269, Ref. 50P027LBASB) $760.00

Ford Hydraulic Pump - For tractor models 5635, 6635. Replaces 5129486, 5169039, 5179728. (Item #: 114267, Ref. 5179728) $145.00

No
Picture
Ford Hydraulic Pump - For tractor models 4635, TL90. (Item #: 115517, Ref. 5179726) $173.00

$photo of 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1\4 inch NPT male brass fitting.$
Ford Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1\4 inch NPT male brass fitting. (Item #: 178343, Ref. GG3000) $12.30

Ford Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref. GG1000) $15.60

Ford Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref. GG600) $14.90

$photo of 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1\4 NPT male brass fitting.$
Ford Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1\4 NPT male brass fitting. (Item #: 178202, Ref. GG400) $8.98

$photo of Universal. 1\2 inch I.D. double wire braid (SAE-2R) with 1\2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1.$
Ford Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1\2 inch I.D. double wire braid (SAE-2R) with 1\2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref. H42-2M-24) $14.21

$photo of Universal. 30 inch overall length. 1\2 I.D. 2 Wire. Solid Male 1\2 NPT thread on both ends.$
Ford Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1\2 I.D. 2 Wire. Solid Male 1\2 NPT thread on both ends. (Item #: 118259, Ref. H42-2M-30) $16.10

$photo of Universal. 180 inch (15 Feet) overall length. 1\2 inch inside diameter. 2 Wire. Solid Male 1\2 inch NPT thread on both ends.$
Ford Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1\2 inch inside diameter. 2 Wire. Solid Male 1\2 inch NPT thread on both ends. (Item #: 179906, Ref. H42-2M-180) $55.50

$photo of Universal. I.H.C.: 1\2 I.D. double wire braid (SAE-2R) with 1\2 NPT solid male fittings both ends. 48 overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length$
Ford Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1\2 I.D. double wire braid (SAE-2R) with 1\2 NPT solid male fittings both ends. 48 overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref. H42-2M-48) $16.50

$photo of Universal. 12 inch overall length. 1\2 I.D. 2 Wire. Solid Male 1\2 NPT thread on both ends.$
Ford Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1\2 I.D. 2 Wire. Solid Male 1\2 NPT thread on both ends. (Item #: 118257, Ref. H42-2M-12) $11.00

$photo of 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1\4 NPT male brass fitting.$
Ford Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1\4 NPT male brass fitting. (Item #: 172338, Ref. GG60) $15.60

Ford Hydraulic Filter Spin-On, Intake - Outside diameter 5.38 inch, inside diameter 1.75 inch, height 9.62 inch. For tractor models 6510S, 6610S, 7610S, 8010, 5640, 6640, 7740, 7840, 8240, 8340, 8160, 8260, 8360, 8560. Replaces F0NNB486BB. (Item #: 126239, Ref. 82005016) $49.80

No
Picture
Ford Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 117609, Ref. NCA851A) $6.60

Ford Hydraulic Pump - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. This item may take up to two weeks for delivery. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 126603, Ref. NAA600D) $900.00

$photo of For tractor models 8N. The width of this pump at the valve chambers is 7-1\2 . For some tractors, minor grinding of the pump housing opening might be needed for installation. Replaces 8N605A.$
Ford Hydraulic Pump - For tractor models 8N. The width of this pump at the valve chambers is 7-1\2 . For some tractors, minor grinding of the pump housing opening might be needed for installation. Replaces 8N605A. (Item #: 121483, Ref. 8N605A) $480.00

$photo of For 540 RPM 6 spline 1 3\8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5\16 - 12 ORB. Outlets 1 1\16 - 12 ORB. Recommended hose sizes 1 1\4 inlet, 3\4 outlet.$
Ford PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3\8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5\16 - 12 ORB. Outlets 1 1\16 - 12 ORB. Recommended hose sizes 1 1\4 inlet, 3\4 outlet. (Item #: 120040, Ref. HC-PTO-1A) $1307.44

Ford Hydraulic Line Set - This manifold fits tractors with piston type pump (round body) for tractor models: Jubilee, NAA. (Item #: 178967, Ref. NAA876A) $500.00

No
Picture
Ford Hydraulic Pump - 13CC pump. Also replaces 83939932. For tractor models 1910, 2110. (Item #: 149885, Ref. SBA340450420) $649.00

$photo of For 5\8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A$
Ford Vane Type Hydraulic Pump Kit - For 5\8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A (Item #: 178623, Ref. CPN972B) $485.01

$photo of For 3\4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces CPN981B$
Ford Vane Type Hydraulic Pump Kit - For 3\4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces CPN981B (Item #: 178627, Ref. CPN972C) $485.01

Ford Hydraulic Lift Oil Level Dipstick - Fits Ford 4 Cylinder tractor models: (1954 to 1964) 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900 and 901. Replaces NCA927B. (Item #: 126537, Ref. NCA927B) $20.60

Ford Hydraulic Lift Oil Level Dipstick - Fits Ford 4 Cylinder tractor models (1954-1964) 941, 950, 951, 960, 961, 971 and 981. Replaces NCA927B. (Item #: 126537, Ref. NCA927B) $20.60

Ford Vane Style Hydraulic Pump Shaft - This Vane Style Hydraulic Pump Shaft comes with drive key. It is used on Ford 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 940, 950, 960 all using square vane hydraulic pumps (1954 to 1955; up to serial number 66849). It is 4.442 inches long, it has a 0.601 inch outside diameter on the keyed end and a 0.450 inch outside diameter on the splined end. It replaces key: 356961-S and shaft: NCA966A. (Item #: 180394, Ref. NCA966A) $126.00

$photo of This hydraulic pump pressure plate is for Vane style pumps. It has a Manganese phosphate coating is 2.440 inches across and 0.797 inches tall. It is used on all 1954 to 1955, up to serial number 66849 using 3\4 inch wide vane style pumps. Replace original part number NCA969B.$
Ford Hydraulic Pump Pressure Plate - This hydraulic pump pressure plate is for Vane style pumps. It has a Manganese phosphate coating is 2.440 inches across and 0.797 inches tall. It is used on all 1954 to 1955, up to serial number 66849 using 3\4 inch wide vane style pumps. Replace original part number NCA969B. (Item #: 182959, Ref. NCA969B) $145.00

Ford Hydraulic Lift Cylinder Piston O-Ring - This o-ring is used with C5NN530B 3 inch piston. Fits Models: 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4110LCG, Dexta, Super Dexta. Replaces 87111S95, 381871R1, 81845041. (Item #: 173006, Ref. 87111S95) $0.90

Ford Hydraulic Lift Cylinder Piston Washer - This Backing Washer is used with C5NN530B 3 inch piston. Fits Models: 2N, 8N, 9N, 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, Dexta, Super Dexta. It replaces original part numbers NCA473A and 81801439. (Item #: 170949, Ref. NCA473A) $3.50

Ford Hydraulic Pump - This hydraulic pump is also the power steering supply for the 1700, 1710 and 1900 models. This pump is gear type and engine mounted. Replaces original part numbers SBA340040070, 83924166, 87765078 (Item #: 149886, Ref. SBA340450240) $721.75

$photo of This hydraulic filter is used on 1120 compact tractor, 1215 compact tractor, 1220 compact tractor, 1320 compact tractor, 1510 compact tractor, 1520 compact tractor, 1620 compact tractor, 1710 compact tractor, 1715 compact tractor. Outside Diameter: 3 11\16 inch (93), length: 5 3\4 inch (172), thread: 1 inch x 16 UNF. Replaces: Baldwin - BT8391, Fleetguard - HF6513, Ford 9846407, SBA340500380, SBA340500610, Wix - 51736.$
Ford Hydraulic Filter - This hydraulic filter is used on 1120 compact tractor, 1215 compact tractor, 1220 compact tractor, 1320 compact tractor, 1510 compact tractor, 1520 compact tractor, 1620 compact tractor, 1710 compact tractor, 1715 compact tractor. Outside Diameter: 3 11\16 inch (93), length: 5 3\4 inch (172), thread: 1 inch x 16 UNF. Replaces: Baldwin - BT8391, Fleetguard - HF6513, Ford 9846407, SBA340500380, SBA340500610, Wix - 51736. (Item #: 158958, Ref. 9846407) $54.00

Ford Hydraulic Piston Seal - Original Single Groove Lift Piston Seal. Replaces E11GF9 (Item #: 183467, Ref. E11GF9) $8.10

Ford Hydraulic Pump Drive Gear - Hydraulic Pump Drive Gear is 1.125 inch overall thickness at the bushing. It is used with Housing C9NN7049C and E0NN7049AA. It will not work on C5NN7049A housing. Replaces: C7NN873A, C7NNN883A, D3NN873A, D9NNN883AA, D3NNN883A, D9NN883AA, D9NNN883AA, 83919059. (Item #: 172845, Ref. D3NNN883A) $117.00

$photo of Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3\8 inch thread. Replaces C5NNN901A, 81802102$
Ford Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3\8 inch thread. Replaces C5NNN901A, 81802102 (Item #: 163813, Ref. C5NNN901A) $9.30

Ford Hydraulic Lift Arm, Right Hand - This is the Right Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802150, C5NNB920D (Item #: 154976, Ref. C5NNB920D) $51.00

Ford Hydraulic Lift Arm, Left Hand - This is the Left Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802158, C5NNB921D (Item #: 154979, Ref. C5NNB921D) $50.00

Ford Hydraulic Lift Arm, Right Hand - This Right Hand Hydraulic Lift Arm is used on FORD 3900, 4100, 4600, 2810, 2910, 3610, 3910, 4610, 3230, 3430, 3930, 4630, 4830, 5030, 250C, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 532, 535, 540, 540B, 545, 545A, 545B, 545C, 545D. It Replaces D3NNB920A. (Item #: 178945, Ref. D3NNB920A) $179.94

No
Picture
Ford Hydraulic Lift Arm, Left Hand - This Left Hand Hydraulic Lift Arm is used on FORD 3900, 4100, 4600, 2810, 2910, 3610, 3910, 4610, 3230, 3430, 3930, 4630, 4830, 5030, 250C, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 532, 535, 540, 540B, 545, 545A, 545B, 545C, 545D. It Replaces D3NNB921A. (Item #: 131822, Ref. D3NNB921A) $179.94

$photo of This Comprehensive Hydraulic Pump Repair Kit contains items in image marked with an asterisk; 1 - Wobble Shaft D9NN966AA, 1 - Wobble Shaft Needle Bearing 169024, 1 - Idler Gear Shaft C5NN872A, 2 - Idler Gear Shaft Needle Bearings C5NNN900A, 1 - Wobble Shaft Bearing Plate C0NN859A, 6 9\16 Pistons C5NN615A, 6 5\8 Pistons NCA615C, 6 - Pistons Springs NCA861B, 6 Inlet Springs NCA647B, 6 - Outlet Springs C5NN646A, 12 - Balls 354872S, 6 - Seats C5NN885A, 6 - Cages C0NND844A, 6 Cages C0NND843A, 1 Bearing Cup 141296, 1- Bear Cone 141295, Seals C5NN851A, and Gaskets E4NN911AA, D6NN867A, C0NN869A, 1 Woodruff Key 81797891. Replaces CKPN600A, 81821107, 5A-1306. For Tractors 1965-1983 with Piston style pumps.$
Ford Hydraulic Pump Repair Kit - This Comprehensive Hydraulic Pump Repair Kit contains items in image marked with an asterisk; 1 - Wobble Shaft D9NN966AA, 1 - Wobble Shaft Needle Bearing 169024, 1 - Idler Gear Shaft C5NN872A, 2 - Idler Gear Shaft Needle Bearings C5NNN900A, 1 - Wobble Shaft Bearing Plate C0NN859A, 6 9\16 Pistons C5NN615A, 6 5\8 Pistons NCA615C, 6 - Pistons Springs NCA861B, 6 Inlet Springs NCA647B, 6 - Outlet Springs C5NN646A, 12 - Balls 354872S, 6 - Seats C5NN885A, 6 - Cages C0NND844A, 6 Cages C0NND843A, 1 Bearing Cup 141296, 1- Bear Cone 141295, Seals C5NN851A, and Gaskets E4NN911AA, D6NN867A, C0NN869A, 1 Woodruff Key 81797891. Replaces CKPN600A, 81821107, 5A-1306. For Tractors 1965-1983 with Piston style pumps. (Item #: 185394, Ref. S65428) $312.00

Ford Hydraulic Pump Gasket - Hydraulic Pump Gasket is used on fits pumps D8NN600KB and D8NN600LB. It replaces original part numbers 83961379, D4NN915A, E7NN915AA (Item #: 156043, Ref. D4NN915A) $11.40

Ford Hydraulic Pump - Hydraulic Pump is used on 1120 Compact Tractor, 1215 Compact Tractor, 1220 Compact Tractor, 1320 Compact Tractor, 1520 Compact Tractor, 1620 Compact Tractor, 1715 Compact Tractor, 1720 Compact Tractor, 1920 Compact Tractor. Note: If equipped with SBA340450840 pump, some fittings and lines WILL NEED to be replaced with original lines and fittings. Replaces 83966846, SBA340450500 (Item #: 178896, Ref. SBA340450500) $620.00

Ford Hydraulic Filter - Hydraulic Filter is used on 5000, 5100, 5200, 5500, 7000, 7100, 7200, Major, Power Major, Super Major. Replaces 81802003, 84277202, C5NNN832C (Item #: 170936, Ref. C5NNN832C) $9.90

$photo of Hydraulic Pump Compression Nut Fits Ford 1965 through 12-1974 with engine mounted, cast iron body hydraulic piston pump. Used on 1\2 inch pressure line. Two used per tractor. Sold individually. Replaces: 291320, 81821215, C7NNH856C$
Ford Hydraulic Pump Compression Nut - Hydraulic Pump Compression Nut Fits Ford 1965 through 12-1974 with engine mounted, cast iron body hydraulic piston pump. Used on 1\2 inch pressure line. Two used per tractor. Sold individually. Replaces: 291320, 81821215, C7NNH856C (Item #: 178062, Ref. C7NNH856C) $12.70

$photo of This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3\4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3\4 Inch NPT. Mounting bolt spacing 4 3\16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3\4X3\4 HC4008 adapter, 1-720FSO-1X1-1\4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering.$
Ford Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3\4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3\4 Inch NPT. Mounting bolt spacing 4 3\16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3\4X3\4 HC4008 adapter, 1-720FSO-1X1-1\4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref. L827-10X-LB) $585.00

$photo of This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3\8 inch diameter, 4-3\16 inch center to center. Also 2 foot mount holes 3\8 inch diameter, 5 inch center to center. Center pilot hole 3-1\4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering.$
Ford Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3\8 inch diameter, 4-3\16 inch center to center. Also 2 foot mount holes 3\8 inch diameter, 5 inch center to center. Center pilot hole 3-1\4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref. 33020-1) $376.00

$photo of This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3\4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5\16 inch. Outlet ORB 1-1\16 inch. SAE A Mounting. Bolt holes are 3\8 inch, 4 3\16 inch center to center. Replaces 192504, 195453.$
Ford Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3\4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5\16 inch. Outlet ORB 1-1\16 inch. SAE A Mounting. Bolt holes are 3\8 inch, 4 3\16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref. 40P018LAJSA) $662.00

Ford Hydraulic Remote Valve - Single Spool Double Acting Hydraulic Remote Valve Kit is used on 5000, 6600, 7000, 5600, 7600 tractors. Does not work on 10 series or compact tractors. (Item #: 166388, Ref. FDS4447) $220.00

Ford Hydraulic Pump Mounting Gasket - On four cylinder Ford tractors 1953-1964, this gasket mounts both gear type and vane type hydraulic pumps to the engine. (Item #: 167408, Ref. EAF911B) $1.20

Ford Hydraulic Pump Plate - Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Item #: 170934, Ref. C0NN852A) $34.00

Ford Hydraulic Pump Mounting Gasket - For Transmission mounted pumps on Ford 3000, 3550, 4000, 4000SU, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500. (Item #: 182819, Ref. C5NN915C) $10.80

Ford Hydraulic Pump Mounting Gasket - For Transmission Mounted Hydraulic Pumps on Ford models: 250C, 2810, 2910, 335, 340, 340A, 340B, 345C, 345D, 3910, 3910N, 3910V, 4110, 4110N, 4110V, 420, 445, 450, 455, 455C, 455D, 4610, 4610N, 4610V, 4830, 4830N, 5030, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. This gasket replaces Ford part numbers E7NN915A, D4NN915A, 83961379 (Item #: 156043, Ref. E7NN915A) $11.40

Ford Hydraulic Tube Elbow - Used on ford tractors built after 1965, this elbow replaces Ford part number C7NNE883A (Item #: 155019, Ref. C7NNE883A) $22.80

$photo of The bolt holes on the flange are 5\16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3\4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler.$
Ford Hydraulic Pump Drive Flange - The bolt holes on the flange are 5\16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3\4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref. 192199) $21.10

$photo of This is a new Bosch A31XRP2 typed Hydraulic Pump used on Ford \ New Holland models: 4835, 5635, 6635, 7635, 8160, 8260, 8360, TL100, TL100A, TL70, TL80, TL80A, TL90, TL90A, TN55, TN55D, TN55S, TN60A, TN60DA, TN60SA, TN65, TN65D, TN65F, TN65S, TN70, TN70A, TN70D, TN70DA, TN70F, TN70S, TN70SA, TN75, TN75A, TN75D, TN75DA, TN75F, TN75FA, TN75S, TN75SA, TN80F, TN90F, TN95F, TN95FA. This pump replaces 5180275, 5167394$
Ford Hydraulic Pump - This is a new Bosch A31XRP2 typed Hydraulic Pump used on Ford \ New Holland models: 4835, 5635, 6635, 7635, 8160, 8260, 8360, TL100, TL100A, TL70, TL80, TL80A, TL90, TL90A, TN55, TN55D, TN55S, TN60A, TN60DA, TN60SA, TN65, TN65D, TN65F, TN65S, TN70, TN70A, TN70D, TN70DA, TN70F, TN70S, TN70SA, TN75, TN75A, TN75D, TN75DA, TN75F, TN75FA, TN75S, TN75SA, TN80F, TN90F, TN95F, TN95FA. This pump replaces 5180275, 5167394 (Item #: 168782, Ref. 5180275) $255.98

Ford Hydraulic Pump, Remanufactured - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. The is a remanufactured version of NAA600D. Add $250.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. This item may take up to two weeks for delivery. (Item #: 205308, Ref. NAA600DR) $1080.01

$photo of Applicable for the following: Ford 2000, 3000, 3400 made after 10\69$
Ford Hydraulic Inlet Suction Line - Applicable for the following: Ford 2000, 3000, 3400 made after 10\69 (Item #: 183908, Ref. D0NNB835A) $86.37

$photo of Applicable for the following: 2000, 3000, 3400 made after 10\69. *****Will not fit SELECT O SPEED transmission****$
Ford Hydraulic Pressure Line - Applicable for the following: 2000, 3000, 3400 made after 10\69. *****Will not fit SELECT O SPEED transmission**** (Item #: 168106, Ref. D0NNH867D) $75.00

$photo of Hydraulic Plug measures 1 5\8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING.$
Ford Hydraulic Plug - Hydraulic Plug measures 1 5\8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref. 957E7010) $15.80

Ford Hydraulic Return Tube - Return tube used on the Ford 3000. (Item #: 185555, Ref. C7NNN853B) $122.00

$photo of Hydraulic pump piston with and diameter of 9\16. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models. Replaces 81801695 and C0NN882B. For models: 2000 3 cylinder, 2150, 2300, 2600, 2600V, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 4000 3 cylinder, 4000SU, 4100, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU.$
Ford Hydraulic Pump Piston - Hydraulic pump piston with and diameter of 9\16. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models. Replaces 81801695 and C0NN882B. For models: 2000 3 cylinder, 2150, 2300, 2600, 2600V, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 4000 3 cylinder, 4000SU, 4100, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU. (Item #: 184020, Ref. C5NN615A) $13.50

$photo of Hydraulic pump piston with an diameter of 5\8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000.$
Ford Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5\8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Item #: 184993, Ref. NCA615C) $11.10

$photo of Used on Ford models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 4000, 4110, 4140, 4600SU, 231, 233, 333, 334, 340, 340A, 340B, 445, 445A, 450, 531, 540, 540A, 540B, 545, 545A, 3500. This part has an OD of 1 inch, and ID of 3\4 inch and is 3.9 inches long. Replaces 81800791, 83937249, E66GF9, E1NNB681AA$
Ford Hydraulic Lift Rocker Bushing - Used on Ford models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 4000, 4110, 4140, 4600SU, 231, 233, 333, 334, 340, 340A, 340B, 445, 445A, 450, 531, 540, 540A, 540B, 545, 545A, 3500. This part has an OD of 1 inch, and ID of 3\4 inch and is 3.9 inches long. Replaces 81800791, 83937249, E66GF9, E1NNB681AA (Item #: 166271) $27.10

$photo of This pin is used with C7NN535B, C7NN535C and E0NN535AA Top Link Rockers. The pin is number 4 in the image. Used on Ford 3500, 2000, 2100, 2110, 2120, 2150 1\70-12\74, U.K. Only, 330A, 2300, 231, 2310, 233, 2600, 2600N, 2600R, 2600V, 2610, 2610V, 3000, 333, 334, 335, 3600, 3600N, 3600R, 3600V, 3610V, 4000, 4110, 4600SU, 531$
Ford Hydraulic Lift Rocker Pin - This pin is used with C7NN535B, C7NN535C and E0NN535AA Top Link Rockers. The pin is number 4 in the image. Used on Ford 3500, 2000, 2100, 2110, 2120, 2150 1\70-12\74, U.K. Only, 330A, 2300, 231, 2310, 233, 2600, 2600N, 2600R, 2600V, 2610, 2610V, 3000, 333, 334, 335, 3600, 3600N, 3600R, 3600V, 3610V, 4000, 4110, 4600SU, 531 (Item #: 189212) $28.50

$photo of <UL> <li>For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2600, 2610, 3600, 3610, 5610, 6610, 6710, 7610, 7710, 7910, 8210<\li> <li>Replaces Ford OEM number E1NN600AA, 81836735, 81844738, 83900640, 83928509, 83996272, D10026150, D3NN600A, D3NN600H, D4NN600B, E1NN600AB, ESL11276, ESL13669<\li> <li>Pump mounts to engine <\li> <li>Uses spin on filter<\li> <li>To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B><\li> <\UL>$
Ford Hydraulic Pump - Economy - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2600, 2610, 3600, 3610, 5610, 6610, 6710, 7610, 7710, 7910, 8210 Replaces Ford OEM number E1NN600AA, 81836735, 81844738, 83900640, 83928509, 83996272, D10026150, D3NN600A, D3NN600H, D4NN600B, E1NN600AB, ESL11276, ESL13669 Pump mounts to engine Uses spin on filter To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B> (Item #: 103149) $301.00

$photo of <UL> <li>For Ford tractor models 2N, 8N, 9N<\li> <li>Replaces Ford OEM number L36-8<\li> <li>Round Bore<\li> <li>2-1\4 Spacing<\li> <li>For Set Screw<\li> <\UL>$
Ford 7\8 inch Hydraulic Pump Drive Flange - For Ford tractor models 2N, 8N, 9N Replaces Ford OEM number L36-8 Round Bore 2-1\4 Spacing For Set Screw (Item #: 111994) $77.68

$photo of <UL> <li>For Ford tractor models 2N, 8N, 9N<\li> <li>Replaces Ford OEM number 9N502<\li> <\UL>$
Ford Hydraulic Lift Housing Gasket - For Ford tractor models 2N, 8N, 9N Replaces Ford OEM number 9N502 (Item #: 112064) $4.30

$photo of <UL> <li>For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7700, 7710, 7810, 7910, 8210<\li> <li>Replaces Ford OEM number 81801593, C5NN544B<\li> <\UL>$
Ford Hydraulic Shaft - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7700, 7710, 7810, 7910, 8210 Replaces Ford OEM number 81801593, C5NN544B (Item #: 119855) $112.72

$photo of <UL> <li>For Ford tractor models TW5, TW15, TW25, TW35, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830<\li> <li>Replaces Ford OEM number D5NN530A<\li> <\UL>$
Ford Hydraulic Cylinder Piston - For Ford tractor models TW5, TW15, TW25, TW35, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830 Replaces Ford OEM number D5NN530A (Item #: 155012) $35.72

$photo of <UL> <li>For Ford tractor models 5000, 5100 (1975-12\31\76), 5200 (1975-12\31\76), 5340 (1975-12\31\76), 5600 (1975-12\31\76), 5700 (1975-12\31\76), 6600 (1975-12\31\76), 6700 (1975-12\31\76), 7000, 7200 (1975-12\31\76), 7600 (1975-12\31\76), 7700 (1975-12\31\76)<\li> <li>Replaces Ford OEM number C5NN530C, D3NN530D<\li> <li>Diameter: 3.75 <\li> <li>For lift cylinder O-ring use Item #: 140609<\li> <\UL>$
Ford Hydraulic Lift Cylinder Piston - For Ford tractor models 5000, 5100 (1975-12\31\76), 5200 (1975-12\31\76), 5340 (1975-12\31\76), 5600 (1975-12\31\76), 5700 (1975-12\31\76), 6600 (1975-12\31\76), 6700 (1975-12\31\76), 7000, 7200 (1975-12\31\76), 7600 (1975-12\31\76), 7700 (1975-12\31\76) Replaces Ford OEM number C5NN530C, D3NN530D Diameter: 3.75 For lift cylinder O-ring use Item #: 140609 (Item #: 155013) $31.98

$photo of <UL> <li>For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, 8240, 8340 <li>Replaces Ford OEM number C7NN526D<\li> <\li> <li>Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145<\li> <li>Replaces New Holland OEM number 81817891<\li> <\UL>$
Ford Hydraulic Lift Rod - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, 8240, 8340 Replaces Ford OEM number C7NN526D Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145 Replaces New Holland OEM number 81817891 (Item #: 155016) $3.98

$photo of <UL> <li>For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 4630, 4830, 5030<\li> <li>Compatible with Ford Construction and industrial models 345, 345D, 420, 445, 445D, 450, 535, 540, 545, 545D, 3500, 3550, 4500<\li> <li>Replaces Ford OEM number C5NNN905B<\li> <\UL>$
Ford Hydraulic Spring Housing - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 4630, 4830, 5030 Compatible with Ford Construction and industrial models 345, 345D, 420, 445, 445D, 450, 535, 540, 545, 545D, 3500, 3550, 4500 Replaces Ford OEM number C5NNN905B (Item #: 155018) $43.98

$photo of <UL> <li>For Ford tractor models TW5, TW10, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830<\li> <li>Replaces Ford OEM number D8NN600GA, E2NN600BA, 83913536, 83945584<\li> <li>Genuine Dynamatic pump<\li> <li>Manufactured to exact OEM specifications<\li> <li>To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B><\li> <li>For an economy version of this item use Item #: 115518<\li> <\UL>$
Ford Hydraulic Pump - Dynamatic - For Ford tractor models TW5, TW10, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830 Replaces Ford OEM number D8NN600GA, E2NN600BA, 83913536, 83945584 Genuine Dynamatic pump Manufactured to exact OEM specifications To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B> For an economy version of this item use Item #: 115518 (Item #: 157620) $510.00

$photo of <UL> <li>For Ford Construction and industrial models 455C, 455D, 555C, 555D, 575D, 655C, 655D, 675D<\li> <li>Replaces Ford OEM number F2NN3K514AA99M, 81875130<\li> <li>To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B><\li> <\UL>$
Ford Hydraulic Pump - For Ford Construction and industrial models 455C, 455D, 555C, 555D, 575D, 655C, 655D, 675D Replaces Ford OEM number F2NN3K514AA99M, 81875130 To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B> (Item #: 157657) $664.00

$photo of <UL> <li>For Ford tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981<\li> <li>Replaces OEM number D6NN867A<\li> <\UL>$
Ford Hydraulic Pump Cover Gasket - For Ford tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981 Replaces OEM number D6NN867A (Item #: 160522) $2.30

$photo of <UL> <li>For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 681, 700, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230 (no cab), 3300, 3310, 3330, 3400, 3430 (no cab), 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130 (no cab), 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830 (no cab), 5000, 5030 (no cab), 5100, 5200, 5340, 7000, 7100, 7200<\li> <li>Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 335, 530A, 531, 3550, 4140, 4400, 4500<\li> <li>Replaces Ford OEM number 83900081<\li> <\UL>$
Ford Hydraulic Valve Seal Kit - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 681, 700, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230 (no cab), 3300, 3310, 3330, 3400, 3430 (no cab), 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130 (no cab), 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830 (no cab), 5000, 5030 (no cab), 5100, 5200, 5340, 7000, 7100, 7200 Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 335, 530A, 531, 3550, 4140, 4400, 4500 Replaces Ford OEM number 83900081 (Item #: 161249) $6.80

$photo of <UL> <li>For Ford tractor models 5000, 5100, 5110 (2 pin), 5200, 5340, 5600, 5610, 5700, 6600, 6610 (2 pin), 6700, 6710 (2 pin), 6810 (2 pin), 7100, 7200, 7410 (2 pin), 7600, 7610 (2 pin), 7700, 7710 (2 pin), 7810, 7910, 8210<\li> <li>Replaces Ford OEM number E0NN535DA<\li> <li>For models with 2 speed PTO<\li> <\UL>$
Ford Hydraulic Lift Rocker - For Ford tractor models 5000, 5100, 5110 (2 pin), 5200, 5340, 5600, 5610, 5700, 6600, 6610 (2 pin), 6700, 6710 (2 pin), 6810 (2 pin), 7100, 7200, 7410 (2 pin), 7600, 7610 (2 pin), 7700, 7710 (2 pin), 7810, 7910, 8210 Replaces Ford OEM number E0NN535DA For models with 2 speed PTO (Item #: 162982) $116.00

$photo of <UL> <li>For Ford Construction and industrial model 555E <li>Replaces Ford OEM number 85802567<\li> <\li> <li>Compatible with New Holland Construction and industrial model LB75<\li> <li>Replaces New Holland OEM number 85802567<\li> <li>Rod: 50mm<\li> <li>Bore: 90mm<\li> <\UL>$
Ford Hydraulic Cylinder Seal Kit - For Ford Construction and industrial model 555E Replaces Ford OEM number 85802567 Compatible with New Holland Construction and industrial model LB75 Replaces New Holland OEM number 85802567 Rod: 50mm Bore: 90mm (Item #: 163937) $65.00

$photo of <UL> <li>For Ford tractor models 2610, 2810, 3230 (without Syncro Transmission), 3430 (without Syncro Transmission), 3900, 3910, 3930 (without Syncro Transmission), 4110, 4130 (without Syncro Transmission), 4610, 4630 (without Syncro Transmission), 4830 (without Syncro Transmission), 5030 (without Syncro Transmission), 5600, 5700, 6600 (without Syncro Transmission), 6700 (without Syncro Transmission), 7600 (without Syncro Transmission), 7700 (without Syncro Transmission)<\li> <li>Compatible with Ford Construction and industrial models 650 (11\75-12\81), 750 (11\75-12\81), 755 (11\75-12\81)<\li> <li>Replaces Ford OEM number D4NNB483A, D3NNB483A, 83906168, 81838658<\li> <\UL>$
Ford Hydraulic Pump Gasket - For Ford tractor models 2610, 2810, 3230 (without Syncro Transmission), 3430 (without Syncro Transmission), 3900, 3910, 3930 (without Syncro Transmission), 4110, 4130 (without Syncro Transmission), 4610, 4630 (without Syncro Transmission), 4830 (without Syncro Transmission), 5030 (without Syncro Transmission), 5600, 5700, 6600 (without Syncro Transmission), 6700 (without Syncro Transmission), 7600 (without Syncro Transmission), 7700 (without Syncro Transmission) Compatible with Ford Construction and industrial models 650 (11\75-12\81), 750 (11\75-12\81), 755 (11\75-12\81) Replaces Ford OEM number D4NNB483A, D3NNB483A, 83906168, 81838658 (Item #: 164846) $6.00

$photo of <UL> <li>For Ford tractor models 5000, 5100, 5200, 5340, 5900, 7000, 7100, 7200, 7700<\li> <li>Replaces Ford OEM number 81802128, C5NN915A, 83963582, 83901199, D3NN915A, E7NN915BA<\li> <\UL>$
Ford Hydraulic Pump Gasket - For Ford tractor models 5000, 5100, 5200, 5340, 5900, 7000, 7100, 7200, 7700 Replaces Ford OEM number 81802128, C5NN915A, 83963582, 83901199, D3NN915A, E7NN915BA (Item #: 165041) $5.70

No
Picture
Ford Pump - Hydraulic - For Ford Construction and industrial models 550 (1\75-9\78), 555 (10\78-10\88), 555A (1\84-5\85), 555B (6\85-10\88), 655 (7\85-10\88), 655A (6\85-10\88) Replaces Ford OEM number E7NN600BA Spline: 13 (Item #: 166326) $944.52

No
Picture
Ford Hydraulic Steering Cylinder Seal Kit - For Ford Construction and industrial models 555C, 555D, 575D, 650, 655C, 655D, 675D, 750, 755, 755A, 755B Replaces Ford OEM number FP457 (Item #: 167379) $45.60

No
Picture
Ford Hydraulic Pump - For Ford Construction and industrial models 5500, 5550 Replaces Ford OEM number C9NN600A (Item #: 168354) $2629.01

$photo of <UL> <li>For Ford tractor models 5110, 5610, 5610S, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7810S, 7840, 7910, 8030, 8210, 8240, 8340 <li>Replaces Ford OEM number E0NNB483AB, E0NNB483AA<\li> <\li> <li>Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS115, TV140<\li> <li>Replaces New Holland OEM number 83925891, 83961380<\li> <\UL>$
Ford Hydraulic Pump Gasket - For Ford tractor models 5110, 5610, 5610S, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7810S, 7840, 7910, 8030, 8210, 8240, 8340 Replaces Ford OEM number E0NNB483AB, E0NNB483AA Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS115, TV140 Replaces New Holland OEM number 83925891, 83961380 (Item #: 168809) $8.10

$photo of <UL> <li>For Ford Construction and industrial models 445D, 455C, 555C, 555D, 575D, 655C, 655D, 675D<\li> <li>Replaces Ford OEM number FP419<\li> <\UL>$
Ford Hydraulic Cylinder Seal Kit - For Ford Construction and industrial models 445D, 455C, 555C, 555D, 575D, 655C, 655D, 675D Replaces Ford OEM number FP419 (Item #: 168943) $60.00

$photo of <UL> <li>For Ford Construction and industrial models 345C, 345D, 445C, 445D, 545C, 545D <li>Replaces Ford OEM number FP459<\li> <\li> <li>Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B115, LB75, LB75B, LB90, LB90B, LB110, LB110B, LB115, LB115B<\li> <li>Replaces New Holland OEM number 87428620<\li> <\UL>$
Ford Hydraulic Cylinder Seal Kit - For Ford Construction and industrial models 345C, 345D, 445C, 445D, 545C, 545D Replaces Ford OEM number FP459 Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B115, LB75, LB75B, LB90, LB90B, LB110, LB110B, LB115, LB115B Replaces New Holland OEM number 87428620 (Item #: 168944) $26.50

No
Picture
Ford Hydraulic Lift Cover and Cylinder O-Ring Kit - 3-3\4 inch Piston - For Ford tractor models 5000, 5100, 5190, 5200, 7000, 7100, 7200 Replaces Ford OEM number 81825773, E2152T9, B5001, 1934245 Lift Cover and Cylinder for 3-3\4 Piston only (Item #: 169492) $5.98

$photo of <UL> <li>For Ford tractor models 3000, 4000<\li> <li>Replaces Ford OEM number C5NN600-AA<\li> <li>Minor repair kit for 5.6 gpm piston type pump<\li> <\UL>$
Ford Hydraulic Pump Repair Kit - For Ford tractor models 3000, 4000 Replaces Ford OEM number C5NN600-AA Minor repair kit for 5.6 gpm piston type pump (Item #: 169798) $47.50

$photo of <UL> <li>For Ford tractor models 5010 (5\84-10\91), 5610, 5900 (Mexico, 5\85-12\93), 6410, 6610, 6710 (1\81-9\85), 6810 (4\89-10\91), 7410 (4\89-10\91), 7610, 7710<\li> <li>Replaces Ford OEM number E0NNM974BA, 83927280<\li> <\UL>$
Ford Hydraulic LIft Link Stabilizer Chain and Spring Set - For Ford tractor models 5010 (5\84-10\91), 5610, 5900 (Mexico, 5\85-12\93), 6410, 6610, 6710 (1\81-9\85), 6810 (4\89-10\91), 7410 (4\89-10\91), 7610, 7710 Replaces Ford OEM number E0NNM974BA, 83927280 (Item #: 169840) $6.98

No
Picture
Ford Hydraulic Lever Assembly - For Ford tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030 Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 450, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D Replaces Ford OEM number D4NNB503B, F1NN4211AA, D4NNB503A, 83902050, 83902196 Lever Assembly (Item #: 170557) $72.00

No
Picture
Ford Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532 Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532 Front inlet hole size: 9\16 UNF Front outlet hole size: 5\8 UNF Inner maximum liters per minute: 12.5 Inner maximum gallon per minute: 2.75 Top hole spacing: 107 (Item #: 170931) $522.48

No
Picture
Ford Hydraulic Lift Ram Arm - For Ford tractor models 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7600, 7700 Replaces Ford OEM number C7NN545D Hydraulic Lift Ram Arm (Item #: 170953) $175.00

No
Picture
Ford Hydraulic Lift Cylinder Piston Ring - For Ford tractor models 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700 Replaces Ford OEM number D1NN473B Piston Diameter: 3.75 (Item #: 176453) $5.10

No
Picture
Ford Hydraulic Lift Cylinder Piston Backup Ring - For Ford tractor models 5110, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7810S, 7910, 8210, 8530, 8630 Replaces Ford OEM number D3NN473A For models with 4.12 diameter piston (Item #: 176463) $6.40

No
Picture
Ford Hydraulic Lift Cover Repair Kit - For Ford tractor model 4000 (1965-later) Replaces Ford OEM number VPK2205, E7NN502AA, CKPN485A, D1NN473A, C5NN533A (Item #: 176568) $12.40

No
Picture
Ford Hydraulic Pump End Cover and Pin - For Ford tractor models 2000, 2600, 3000, 3600, 4000, 4600 Replaces Ford OEM number C7NN893C (Item #: 180085) $104.00

No
Picture
Ford Hydraulic Cylinder Seal Kit - For Ford Construction and industrial models 340, 340A, 445, 445A, 450, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 655, 655A Replaces Ford OEM number 251038 Bore Size: 100 mm Rod Outside Diameter: 50 mm (Item #: 189637) $123.94

$photo of <UL> <li>For Ford tractor models 2000 (3 cylinder engine), 3000 (3 cylinder engine), 4000 (3 cylinder engine)<\li> <li>Replaces Ford OEM number C5NN600AA<\li> <li>2 O-ring Ports<\li> <li>To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B><\li> <\UL>$
Ford Hydraulic Pump, Remanufactured, C5NN600AA - For Ford tractor models 2000 (3 cylinder engine), 3000 (3 cylinder engine), 4000 (3 cylinder engine) Replaces Ford OEM number C5NN600AA 2 O-ring Ports To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B> (Item #: 210260) $1268.01

$photo of <UL><li>For Ford tractor models 8000, 8600, 8700, 9000, 9600, 9700<\li><li>Replaces Ford OEM number D5NN600C, 83903943<\li><li>Transmission mount<\li><li>For a new version of this item use Item #: 104232<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford tractor models 8000, 8600, 8700, 9000, 9600, 9700Replaces Ford OEM number D5NN600C, 83903943Transmission mountFor a new version of this item use Item #: 104232Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 404232) $290.01

$photo of <UL><li>For Ford tractor model 8N<\li><li>Replaces Ford OEM number 8N605A<\li><li>For a new version of this item use Item #: 204458<\li><li>Additional Handling and Oversize Fees Apply To This Item<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford tractor model 8NReplaces Ford OEM number 8N605AFor a new version of this item use Item #: 204458Additional Handling and Oversize Fees Apply To This ItemUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 404458) $325.01

$photo of <UL><li>For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830<\li><li>Replaces Ford OEM number D8NN600GA, E2NN600BA, 83913536, 83945584<\li><li>Mounts in transmission housing<\li><li>20 GPM<\li><li>For a new version of this item use Item #: 115518<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8730, 8830Replaces Ford OEM number D8NN600GA, E2NN600BA, 83913536, 83945584Mounts in transmission housing20 GPMFor a new version of this item use Item #: 115518Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 415518) $176.01

$photo of <UL><li>For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35<\li><li>Replaces Ford OEM number D8NN600FA, 83913537<\li><li>Transmission mount<\li><li>16 GPM<\li><li>For a new version of this item use Item #: 104239<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35Replaces Ford OEM number D8NN600FA, 83913537Transmission mount16 GPMFor a new version of this item use Item #: 104239Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 404239) $178.01

$photo of <UL><li>For Ford tractor models TW35, 8830<\li><li>Replaces Ford OEM nos D8NN866AA<\li><li>Teeth: 50<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump Drive Gear, Used - For Ford tractor models TW35, 8830Replaces Ford OEM nos D8NN866AATeeth: 50Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 429806) $89.01

$photo of <UL><li>For Ford tractor models TW5, TW15, TW25, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3600, 3910, 4000, 4100, 4110, 4330, 4340, 4610, 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830<\li><li>Replaces Ford OEM number 83996272, 83900640, 83928509, D3NN600A, D3NN600H, D4NN600B, E1NN600AB, E1NN600AA<\li><li>Replaces Case OEM nos 83996272<\li><li>Pump mounts to engine<\li><li>Uses spin on filter<\li><li>To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B><\li><li>For a new version of this item use Item #: 162462<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3600, 3910, 4000, 4100, 4110, 4330, 4340, 4610, 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830Replaces Ford OEM number 83996272, 83900640, 83928509, D3NN600A, D3NN600H, D4NN600B, E1NN600AB, E1NN600AAReplaces Case OEM nos 83996272Pump mounts to engineUses spin on filterTo validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B>For a new version of this item use Item #: 162462Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 413149) $198.01

$photo of <UL><li>For Ford tractor models 1120, 1215, 1220, 1320, 1520, 1620, 1715<\li><li>Replaces Ford OEM nos SBA340450521, 87779281<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Power Steering Pump, Used - For Ford tractor models 1120, 1215, 1220, 1320, 1520, 1620, 1715Replaces Ford OEM nos SBA340450521, 87779281Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434630) $349.01

$photo of <UL><li>For Ford tractor models 8160, 8260, 8360, 8560<\li><li>Right Hand<\li><li>With 4 Mounting Bolts<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford RH Leverless Hydraulic Coupler, Used - For Ford tractor models 8160, 8260, 8360, 8560Right HandWith 4 Mounting BoltsUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 430670) $263.01

$photo of <UL><li>For Ford Construction and industrial models 5500, 5550<\li><li>Replaces Ford OEM number C9NN600A<\li><li>For a new version of this item use Item #: 168354<\li><li>Additional Handling and Oversize Fees Apply To This Item<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford Construction and industrial models 5500, 5550Replaces Ford OEM number C9NN600AFor a new version of this item use Item #: 168354Additional Handling and Oversize Fees Apply To This ItemUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 463117) $1350.01

$photo of <UL><li>For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7800, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830<\li><li>Compatible with Ford Construction and industrial models 230A, 234, 334, 335<li>Replaces Ford OEM nos 81864873<\li><\li><li>Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115<\li><li>Replaces New Holland OEM nos 81864873, 82988268<\li><li>Single Spool<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Valve, Single Spool, Used - For Ford tractor models TW5, TW15, TW25, TW35, 2310, 2610, 2810, 2910, 3230, 3430, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 5110, 5610, 5640, 5900, 6410, 6610, 6640, 6710, 6810, 7410, 7610, 7710, 7740, 7800, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830Compatible with Ford Construction and industrial models 230A, 234, 334, 335Replaces Ford OEM nos 81864873Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115Replaces New Holland OEM nos 81864873, 82988268Single SpoolUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 497970) $510.01

$photo of <UL><li>For Ford tractor models TW5, TW10, TW15, TW20, TW25 (with 16 GPM Pump), 8000, 8530, 8600, 8630, 8700, 8730, 9000, 9600, 9700<\li><li>Replaces Ford OEM nos D6NN866A, C7NN866B<\li><li>Teeth: 47<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump Drive Gear, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25 (with 16 GPM Pump), 8000, 8530, 8600, 8630, 8700, 8730, 9000, 9600, 9700Replaces Ford OEM nos D6NN866A, C7NN866BTeeth: 47Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 497050) $80.01

$photo of <UL><li>For Ford tractor models 5000, 5100, 5200, 5340, 7000, 7100, 7200<\li><li>Replaces Ford OEM number D2NN600B, 81826808, VPK1013<\li><li>Tractors with dual power<\li><li>To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B><\li><li>For a new version of this item use Item #: 119383<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Hydraulic Pump, Used - For Ford tractor models 5000, 5100, 5200, 5340, 7000, 7100, 7200Replaces Ford OEM number D2NN600B, 81826808, VPK1013Tractors with dual powerTo validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters<\B>For a new version of this item use Item #: 119383Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 419383) $290.01

No
Picture
Ford Hydraulic Pump, Used - For Ford tractor models 2000 (3 cylinder engine), 3000 (3 cylinder engine), 4000 (3 cylinder engine)2 O-ring PortsFor a Remanufactured version of this part use Item #: 210260Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 463695) $690.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy