to-30 valve guide installation

steve-in-ga · Dec 10, 2023

doing a valve job since I have several that aren't sealing. there is a good bit of play in the guides also. I'm planning on replacing the guides. the service manual shows 2 different spacers to get the intake and exhaust valves at the correct depth. all the guides in mine are the same depth so I can't simply measure the ones I have and get them at the correct depth. I want to make a set of spacers. Can someone tell me the correct depths (spacer size) for the intake and exhaust valve guides on a to-30?

thanks
-steve

rustred · Dec 10, 2023

are you doing the valve and seat griding yourself?if not its all machine shop work. u cant just replace only the guides.

steve-in-ga · Dec 11, 2023

(quoted from post at 22:12:36 12/10/23) are you doing the valve and seat griding yourself?if not its all machine shop work. u cant just replace only the guides.

Yes, doing it all myself. I'm not just replacing the guides.

rustred · Dec 14, 2023

Perfect .

to-30 valve guide installation

steve-in-ga

Member

rustred

Well-known Member

steve-in-ga

Member

rustred

Well-known Member

Similar threads