FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers Tractor Bearing

Click here to see parts by model

Allis Chalmers Main Bearing Set -Standard - This Complete Main Bearing Set is standard size for B, IB, C, CA, RC with gas engines. (Item #: 105875, Ref. 70209867) $100.00

No
Picture
Allis Chalmers Rod Bearing Set - For W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Available in standard, .010 or .020. Specify size when ordering. (Item #: 183874, Ref. CRK-AW) $56.00

No
Picture
Allis Chalmers Main Bearing Set, 201 and 226 CID Gas, STD - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43 journal) Size is STD. This is 1 complete set for engine. (Item #: 105947, Ref. 70228620) $108.00

No
Picture
Allis Chalmers Rod Bearing Set - For D15 with 4-cylinder diesel D175 engine. D17 (ENG SN <113009-119937 EXCEPT ENG SN 117087-117104). Available in standard, .002, .010 or .020. Specify size when ordering. (Item #: CRK-D15D4) $68.72

No
Picture
Allis Chalmers Main Bearing Set - For diesels WD45, D17, D19 with 6BD23 and DA262 6-cylinder engines. Available in standard, .010 or .020. Specify size when ordering. (Item #: 105931, Ref. MBK-D17D7) $179.00

$photo of For D17 and WD45 with 226 CID 4-cylinder 4 1\8 overbore gas engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit. No bearings.$
Allis Chalmers Basic Engine Kit - Less Bearings - For D17 and WD45 with 226 CID 4-cylinder 4 1\8 overbore gas engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit. No bearings. (Item #: 130501, Ref. BEKA1121A-LCB) $438.00

Allis Chalmers Basic Engine Kit - Less Bearings - For D17 with engine serial number 113009 to 119937 (not for engine serial number 117087 to 117104) with 262 CID 6-cylinder diesel engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, and an overhaul gasket kit. No bearings. (Item #: 130502, Ref. BEKA1123-LCB) $1769.01

Allis Chalmers Cam Bearing, Set of 3 - Fits 125, 138, 149 CID gas engines in models: B, B15, IB, C, CA, 60H, RC all with B125 CID 4 cylinder gas engines. Also Engines 134 and 149 CID: D10 with engine serial number <3501, D12 with engine serial number 3001>, D14, D15 except Series II with engine serial number 9001>. Replaces 70230795. Note: All three cam bearings are the SAME size diameter. Please check before ordering. (Item #: 105884, Ref. 70209130) $35.80

Allis Chalmers Cam Bearing, Gas Engine - Set of 3. For W, WC, WF, W25, WD, all with 201 CID 4 cylinder Gas Engine. For WD45 and D17 with 226 CID 4 cylinder Gas Engine. (Item #: 105957, Ref. 70229953) $42.80

No
Picture
Allis Chalmers Main Bearing Set - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Main Bearing Set (3). Available in standard, .010, .020, .030 (Item #: 2080078) $21.77

No
Picture
Allis Chalmers Rod Bearing Set, Standard - For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Connecting Rod Bearing Set (3). Replaces 72080082 (Item #: 106996, Ref. 737070M91) $11.20

Allis Chalmers Rod Bearing - Rod Bearing in standard. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-STD. (Item #: 105980) $15.90

Allis Chalmers Main Bearing Set, Standard - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. YTO MBK190XT. Replaces 74062170 (Item #: 105989, Ref. MBK190XT) $142.00

Allis Chalmers Rod Bearing - Single Rod Bearing. For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Connecting Rod Bearing Set (6). YTO CRK-A426. (Item #: 105964, Ref. CRK-A426) $22.30

No
Picture
Allis Chalmers Rod Bearing - For G with Continental N-62. FOR ANGLE SPLIT RODS. Rod Bearing Pair. 4 Required per Engine. Available in Standard, .010, .020. State size in comments section of Order Form. (rtp) (Item #: CB-524P) $78.29

Allis Chalmers Rod Bearing Pair, Standard - For G with Continental N-62. FOR HORIZONTAL SPLIT RODS. Rod Bearing pair, 4 required per engine. YTO CB-345P (Item #: 105885, Ref. CB-345P) $35.90

Allis Chalmers Main Bearing Set, Standard - This Main Bearing Set is complete with Thrust Bearings for G with Continental N-62. Standard Main Bearing Set for 1 engine. (Item #: 105893, Ref. MS-256C) $131.00

No
Picture
Allis Chalmers Engine Overhaul Kit, Less Bearings - For AC WD45 (226 CID 4-cylinder Gas) Contains Sleeve and Piston Kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set, overbore from 4 inches to 4 1\8 inches). Cam Bearing Kit. Complete Gasket Set with main bearing seals where required. Valve Parts (intake and exhaust valves, springs, guides and keys). Engine bearings must be ordered separately. (Item #: EOK1121-LCB) $869.00

Allis Chalmers Main Bearing Set, Standard - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74025006, 74035008 (Item #: 105969, Ref. MS-2002P) $270.00

No
Picture
Allis Chalmers Wheel Bearing Kit - Front Wheel Bearing Kit with 1.500 inch Inner Bearing I.D. For some WD, D10, D12, D15, Early D17 (Item #: 100098, Ref. R2820) $49.80

No
Picture
Allis Chalmers Wheel Bearing Kit - For tractor models D21, 210, 220. (Item #: 180696, Ref. R2822) $73.00

Allis Chalmers Front Wheel Bearing Kit - Front wheel bearing kit. Tractors: D10 (serial number 3501 to serial number 9000), D12 (serial number 3001 to serial number 9000), D10, D12, hi-clearance (prior to serial number 9000), WC, WD, WD45, D14, D15 (prior to serial number 9000), D17 (prior to serial number 42000). This kit is for one wheel only. Kit contains 1 each of the following part number 15288A SEAL, 70209987 CUP, 70222214 CONE, 70209983 CUP and 70209926 CONE. (Item #: 100098, Ref. 70228458) $49.80

Allis Chalmers Rod Bearing Pair, STD - Individual Connecting Rod Bearings. Standard. For tractor models B, IB, C, CA, RC. For standard 1.937 inch rod journal. Replaces: 70223629, 207460, 208602. (Item #: 105870, Ref. 223629) $22.20

Allis Chalmers Rod Bearing, 201 Gas, STD - Individual Connecting Rod Bearings. Standard. For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Item #: 105941, Ref. 231125) $14.40

Allis Chalmers Rod Bearing, 201 Gas, .010 - Individual connecting rod bearings. .010 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Item #: 105943, Ref. 231125-010) $14.10

Allis Chalmers Rod Bearing, 201 Gas, .020 - Individual connecting rod bearings. .020 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Item #: 105944, Ref. 231125-020) $12.10

Allis Chalmers Rod Bearing, Std - Individual connecting rod bearing.For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105902, Ref. 237802) $20.90

Allis Chalmers Rod Bearing, .010 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105903, Ref. 237802-010) $21.40

Allis Chalmers Rod Bearing, .020 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105904, Ref. 237802-020) $17.87

No
Picture
Allis Chalmers Bearing Cone - Inner cone for front wheel bearings. Serial number 1935 and up. For tractor models 210, 220, D21. (Item #: 118730, Ref. 25590BR) $11.90

Allis Chalmers Bearing Cup - Rear axle outer cup, Timken number 29620. For tractor models 190, 190XT, D17. (Item #: 112126, Ref. 70057005) $7.40

No
Picture
Allis Chalmers Bearing Cone - Rear axle outer cone, Timken number 29685. For tractor models 190, 190XT, D17. (Item #: 112127, Ref. 70057006) $19.30

Allis Chalmers Bearing Cup - Rear axle inner cup, Timken number 3920. For tractor models 190, 190XT, D17. (Item #: 116984, Ref. 70202584) $18.70

Allis Chalmers Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Item #: 100022, Ref. 361292R91) $25.70

Allis Chalmers Pilot Bearing - Clutch pilot bearing. For tractor models RC, WC, WD, WD45. (Item #: 100023, Ref. 70205756) $5.40

Allis Chalmers Bearing Cone - Inner cone for front wheel bearings. For tractor models 170, 180, 190, D17, D19. (Item #: 112217, Ref. 70209899) $7.01

Allis Chalmers Bearing Cone - Outer Cone for front wheel bearings. Prior to 3000 and 9001 up. For tractor models B, C, CA, D10, D12. (Item #: 182875, Ref. 70209925) $9.70

Allis Chalmers Bearing Cone - Inner Cone for front wheel bearings. For B, C, CA, D10 (to 3500 and 9001 up), D12 (to 3000 and 9001 up). (Item #: 172510, Ref. 70209926) $9.40

Allis Chalmers Bearing Cone - Inner cone for front wheel bearings. For tractor models WC, WD, WD45, D10 (serial number 3501 thru serial number 9000), D12 (serial number 3001 thru serial number 9000), D14, D15, D17 (prior to serial number 42000). Replaces 2776. (Item #: 172835, Ref. 70222214) $18.90

No
Picture
Allis Chalmers Front Wheel Bearing Kit - Kit containes one each: 70209925 (Cone), 70209984 (Cup), 70209926 (Cone), 70209983 (Cup). Kit repairs one wheel. For tractor models B, C, CA, D10 (to 3500 and 9001 up), D12 (to 3000 and 9001 up). (Item #: 121765, Ref. 70228459) $45.30

Allis Chalmers Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref. N1087) $21.00

Allis Chalmers Bearing Cup - Inner cup for front wheel bearings. For 170, 180, 190, D17, D19 (Item #: 111704, Ref. 70235089) $10.10

Allis Chalmers Front Wheel Bearing Kit - Front wheel bearing kit, 5 bolt hub. Kit contains one each: 15250 (Cup), 15118 (Cone), 2776 (cone), 2720 (Cup), 70235120 (Seal). Repairs one wheel. 42001 and up. For tractor models D10, D12, D15, D17.70247801 (Item #: 100098, Ref. 70228458) $49.80

Allis Chalmers Release Bearing - Clutch Release Bearing. For tractor models 170, 175, 210, 220, 7000, D17, D21. 2.50 inch inside diameter, 4.125 inch outside diameter, 0.870 inch width. Replaces: 260803, 70260803. (Item #: 112189, Ref. N1585) $24.70

Allis Chalmers Pilot Bearing - Clutch pilot bearing. For tractor models 170, 180, 190, D17, D19, D21, WD45. (Item #: 100023, Ref. 70527813) $5.40

No
Picture
Allis Chalmers Rod Bearing Set .010 - AD3.152 PERKINS. For 160. (Item #: 106997, Ref. 737071M91) $10.60

No
Picture
Allis Chalmers Rod Bearing Set .020 - AD3.152 PERKINS. For 160. (Item #: 106998, Ref. 737072M91) $10.60

No
Picture
Allis Chalmers Rod Bearing Set .030 - AD3.152 PERKINS. For 160. (Item #: 106999, Ref. 737073M91) $10.20

Allis Chalmers Rod Bearing, Std - Single rod bearing. For model D15. (Item #: 105914, Ref. 74517331) $15.30

Allis Chalmers Rod Bearing, .010 - Single rod bearing. For model D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) (Item #: 105916, Ref. 74517333) $16.00

Allis Chalmers Rod Bearing, .020 - Single rod bearing. For model D15. (Item #: 105917, Ref. 74517334) $19.00

$photo of Internal Engine Parts. Standard rod bearing. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold Individually. YTO CRK-A426.$
Allis Chalmers Rod Bearing Set - Internal Engine Parts. Standard rod bearing. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold Individually. YTO CRK-A426. (Item #: 105964, Ref. CRK-A426) $22.30

$photo of Single rod bearing in 0.010 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold individually. YTP CRK-A426-010.$
Allis Chalmers Rod Bearing - Single rod bearing in 0.010 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold individually. YTP CRK-A426-010. (Item #: 105965, Ref. CRK-A426-010) $20.30

$photo of Single rod bearing in 0.020 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold individually. YTO CRK-A426-020.$
Allis Chalmers Rod Bearing - Single rod bearing in 0.020 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Sold individually. YTO CRK-A426-020. (Item #: 105966, Ref. CRK-A426-020) $22.40

No
Picture
Allis Chalmers Rod Bearing Set, .010 - Engine Bearing Kit. For gasoline models. .010 under size. For tractors: B, IB, C, CA, RC. (Item #: 183875, Ref. CRK-ABC-010) $66.00

Allis Chalmers Rod Bearing Set, Standard - For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Item #: 183874, Ref. CRK-AW) $56.00

Allis Chalmers Rod Bearing, .010 - .010 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Single bearing. 4 required per engine. Replaces 70231126 (Item #: 105943, Ref. CRK-AW-010) $14.10

Allis Chalmers Rod Bearing Set, Std - With Journals measuring 1.937 inches. Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 183862, Ref. CRK-D10G) $76.00

No
Picture
Allis Chalmers Rod Bearing Set - Rod Bearing Kit. Std. size, 175 CID, 4 cylinder diesel engines, 3-9\16 Std. bore. For model D15. (Item #: CRK-D15D4) $61.16

No
Picture
Allis Chalmers Rod Bearing Set - Rod Bearing Kit. .002, 175 CID, 4 cylinder diesel engines, 3-9\16 inch Std. bore. For tractors: D15. (Item #: CRK-D15D4-002) $62.12

No
Picture
Allis Chalmers Rod Bearing Set - Rod Bearing Kit. .010, 175 CID, 4 cylinder diesel engines, 3-9\16 inch Std. bore. For tractors: D15. (Item #: CRK-D15D4-010) $61.16

No
Picture
Allis Chalmers Rod Bearing Set - Rod Bearing Kit. .020, 175 CID, 4 cylinder diesel engines, 3-9\16 inch Std. bore. For tractors: D15. (Item #: CRK-D15D4-020) $61.16

No
Picture
Allis Chalmers Rod Bearing Set, .010 - Connecting rod bearing set. .010 inch. For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Item #: 184349, Ref. CRK-D17D6-010) $122.00

No
Picture
Allis Chalmers Rod Bearing, .020 - Connecting rod bearing for one rod. 0.020 inch over. For tractors: CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder Diesel engine. Replaces 74517334, 4517334 (Item #: 105917, Ref. CRK-D17D6-020) $19.00

$photo of Engine Overhaul Kit for 175 CID engine. 3-9\16 Std. bore. Kit contains sleeve and piston kit, gasket set, intake valves, exhaust valves, bushings, springs and keys. For tractors: D15. For D10, D12, D14, D15$
Allis Chalmers Overhaul Kit - Less Bearings - Engine Overhaul Kit for 175 CID engine. 3-9\16 Std. bore. Kit contains sleeve and piston kit, gasket set, intake valves, exhaust valves, bushings, springs and keys. For tractors: D15. For D10, D12, D14, D15 (Item #: EOK1128-LCB) $1409.41

No
Picture
Allis Chalmers Bearing Cone - Bearing cone. For model 220. (Item #: 169912, Ref. M88048) $9.00

Allis Chalmers Main Bearing Set, Std - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105907, Ref. MBK-D10G) $196.44

Allis Chalmers Main Bearing Set, .010 - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105908, Ref. MBK-D10G-010) $242.00

Allis Chalmers Main Bearing Set, .020 - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105909, Ref. MBK-D10G-020) $203.00

Allis Chalmers Main Bearing Set, 226 Gas, STD - Standard size with flanged thrust bearing. For tractor models D17, 170 with G226 gas engine. (Item #: 105952, Ref. MBK-D17) $116.00

Allis Chalmers Main Bearing Set, 226 Gas, .010 - .010 inch. For tractor models D17, 170 with G226 gas engine. (Item #: 105953, Ref. MBK-D17-010) $147.00

Allis Chalmers Main Bearing Set, 226 Gas, .020 - .020 inch. For tractor models D17, 170 with G226 gas engine. (Item #: 105954, Ref. MBK-D17-020) $158.00

Allis Chalmers Main Bearing Set, 262 Diesel, STD - Main Bearing Kit. Std. kit. For 262 CID engine. 6 cylinder diesel engine. For tractor models D17, WD45. (Item #: 105931, Ref. MBK-D17D7) $179.00

No
Picture
Allis Chalmers Main Bearing Set, 262 Diesel, .010 - Main Bearing Kit. .010 inch, 3-9\16 inch standard bore. For 262 CID engine. 6 cylinder diesel engine. For tractor models D17, WD45. (Item #: 105932, Ref. MBK-D17D7-010) $215.00

No
Picture
Allis Chalmers Main Bearing Set - Main Bearing Kit. {standard} for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7\8 inch standard bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For D17, WD45. (Item #: MBKA3011) $168.61

No
Picture
Allis Chalmers Main Bearing Set - Main Bearing Kit. .010, for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7\8 inch standard bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For D17, WD45. (Item #: MBKA3011-010) $207.17

No
Picture
Allis Chalmers Main Bearing Set - Main Bearing Kit. .020, for 301 CID 6 cylinder 6491-649T series diesel engines. 3-7\8 inch standard bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For D17, WD45. (Item #: MBKA3011-020) $185.83

No
Picture
Allis Chalmers Bearing Cup - Outer cup for front wheel bearings. Serial number 1935 and up. For 210, 220, D21. (Item #: 172841, Ref. 14274BR) $8.40

No
Picture
Allis Chalmers Bearing - Ball bearing, used in separator drive sheaves. For 1300, 1350, 1400, 1500, 1600, 2300, 2500, 2600, A, A2, B, C, G, L, L2, M, M2, MH, MH2 (Item #: 180776, Ref. 62092RS) $12.20

Allis Chalmers Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Item #: 180095, Ref. 70209983) $6.00

No
Picture
Allis Chalmers Bearing - Cylindrical ball bearing. Used on self-propelled models. For A, A2, B, E, E3, F, F2, G, K, K2, L, L2, M, M2, MH, MH2, N5, N6, N7, R (Item #: 152665, Ref. 71126056) $18.00

Allis Chalmers Disc Bearing - Cylindrical ball bearing with triple seal on each side and square bore. For tractor models K, KT, WKT. (Item #: 180780, Ref. W211PP5) $33.98

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, .030 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106999, Ref. 85036C) $10.20

Allis Chalmers Rod Bearing Pair - Single Rod Bearing in Standard (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Standard journal measures 1.937 inches. Replaces YTO CB-179P-STD and 70207460. (Item #: 105870) $22.20

No
Picture
Allis Chalmers Main Bearing Set, 201 and 226 CID Gas, .030 - For tractor models W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43 journal) Size is .030. This is 1 complete set for engine. (Item #: 105950, Ref. 70228830) $126.00

No
Picture
Allis Chalmers Main Bearing Set, 201and 226 CID Gas, .010 - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43 journal) Size is .010. This is 1 complete set for engine. (Item #: 105948, Ref. 70228620-010) $149.00

No
Picture
Allis Chalmers Main Bearing Set, 201 and 226 CID Gas, .020 - For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 and 226 CID Gas. (2.43 journal) Size is .020. This is 1 complete set for engine. (Item #: 105949, Ref. 70228620-020) $134.00

Allis Chalmers Front Wheel Bearing Kit - This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Item #: 100099, Ref. WBKAC2) $50.00

Allis Chalmers Main Bearing Set .030 - Available in .030. For tractor models B, C, CA, CB, CE, IB, RC. (Item #: 105878, Ref. MS-211P-030) $130.00

Allis Chalmers Wheel Bearing Kit - For tractor models 210, 220, D21. Includes 1 of each of the following 14274 (Cup), 14138A (Cone), 25520 (Cup), 25590 (Cone). (Item #: 100100, Ref. WBKAC3) $46.80

No
Picture
Allis Chalmers Wheel Bearing Kit - Includes 1 each of bearings 1109045, 72098861. For model 5020 with adjustable front axle. Smaller bearing measures .984 inside diameter and 2.047 outside diameter. Larger bearing measures 1.259 inside diameter and 2.559 outside diameter. (Item #: 104310, Ref. WBKAC6) $66.00

No
Picture
Allis Chalmers Wheel Bearing Kit - Unknown application. Does not fit 5030, 5040 (Item #: 104311, Ref. WBKAC7) $51.00

No
Picture
Allis Chalmers Wheel Bearing Kit - Kit includes 1 each of bearings 6305, 2389930 and 1 seal 72090687. For tractor models 5045, 5050 with adj. front axle. (Item #: 104312, Ref. WBKAC8) $58.00

No
Picture
Allis Chalmers Wheel Bearing Kit - Kit includes 1 each of bearings LM67048, LM67010, JL69349, JL69310, 70263021. For tractor models 6060, 6070 with standard tread. (Item #: 104309, Ref. WBKAC5) $51.00

No
Picture
Allis Chalmers Wheel Bearing Kit - Kit inludes 1 each 1440634X1 cup \cone set, LM48510 bearing cup, LM48548 bearing. For model 6140 SN# 2711 and up. (Item #: 104313, Ref. WBKAC9) $21.90

Allis Chalmers Wheel Bearing Kit - Kit includes 1 each of 14274 (Cup), 14138A (Cone), LM104912 (Cup), LM104949 (Cone), 70268132 (seal and wear sleeve). Replaces 268904. For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 100101, Ref. WBKAC4) $43.70

No
Picture
Allis Chalmers Driveshaft Hanger Bearing, MFD - For tractor models 8775, 8785. (Item #: 173158, Ref. 3386985M1) $49.40

No
Picture
Allis Chalmers Sleeve and Seal Kit, Wheel Bearing - For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 111907, Ref. 70268132) $16.50

Allis Chalmers Main Bearing Set, .030 - Main bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105910, Ref. MS-902AL-030) $234.00

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, Std - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106996, Ref. 85036) $11.20

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, .010 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106997, Ref. 85036A) $10.60

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, .020 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106998, Ref. 85036B) $10.60

No
Picture
Allis Chalmers Rod Bearing, .030 - Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Item #: 105905, Ref. CB-781AL-030) $21.50

Allis Chalmers Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref. 22) $5.60

$photo of 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36.$
Allis Chalmers Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref. BH1311) $48.60

Allis Chalmers Front Axle Bearing Assembly - A= 130mm, B= 104mm, C= 49.2mm. For tractor models 8010, 8030, 8050, 8070 all with 4WD. (Item #: 153848, Ref. 4315375) $324.00

No
Picture
Allis Chalmers Rod Bearings, Early - For the early models with 2 inch journals. Only available in Standard. For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Item #: 70223619) $25.73

Allis Chalmers Release Bearing - This new release bearing fits Allis Chalmers G. It replaces original part numbers 800041 and 70800041. The inside diameter is 1.5 inches. (Item #: 114297, Ref. 70800041) $42.80

Allis Chalmers Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197 inch inside diameter, a 1.700 inch outside diameter and is 455 inch wide. It fits (D14, D15, D17 Rear wormshaft bearing, manual steering only), D19 (rear wormshaft bearing, manual steering only - 1 used per tractor) Replaces original part numbers: 228150, 70228150. (Item #: 126732, Ref. 70228150) $16.00

Allis Chalmers Rear Axle Bearing - This Rear Axle Bearing has a 1.5748 inch inside diameter a 2.6772 inch outside diameter and is 0.591 inch thick. It is sealed on one side. Fits Allis Chalmers G and replaces original part numbers 800164, 70800164, 70928929. (Item #: 125723, Ref. 70928929) $43.60

No
Picture
Allis Chalmers Main Bearing Set - .010 - This Complete Main Bearing Set is .010 oversize for B, IB, C, CA, RC with gas engines. (Item #: 105876, Ref. 70209867-010) $131.00

No
Picture
Allis Chalmers Main Bearing Set - .020 - This Complete Main Bearing Set is .020 oversize for B, IB, C, CA, RC with gas engines. (Item #: 105877, Ref. 70209867-020) $142.00

Allis Chalmers Ball Bearing - Bearing is used as an inner PTO bearing on 5020, 5030 Tractors. It is also an inner front wheel bearing, not sealed, on 5015, 5020, 5030; Replaces original part number 72098252 (Item #: 180397, Ref. 9N715BC) $6.10

No
Picture
Allis Chalmers Release Bearing - This throw out bearing measures 2.90 inches outside diameter, 1.77 inches inside diameter and .70 inches width. Replaces SBA398560840. For models 5020 and 5030. Verify measurements to ensure proper fit. (Item #: 121975, Ref. 72098054) $41.20

Allis Chalmers Ball Bearing Assembly - The is an open, deep groove bearing. Used as a rear axle inner bearing on Allis Chalmers 6060, 6070. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043, 72092830 (Item #: 156046, Ref. C5NN7127B) $19.30

Allis Chalmers Rear Axle Bearing - Part number 63092RS is a bearing with two contact seals. The inside diameter is 1.772 inch (45.008mm), outside diameter 3.937 inch (99.999mm), width 0.984 inch (24.993mm). USed on Allis Chalmers 5040, 5045, 5050. Replaces OEM part numbers 6309, 63092RS, JD9268, 391069X1, 72090055. (Item #: 172867, Ref. 63092RS) $25.40

$photo of Measuring 7\8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB$
Allis Chalmers Disc Brake Ball Bearing - Measuring 7\8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref. M830T) $3.00

Allis Chalmers Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Used on Allis Chalmers D14, D15, D17, D19, RC when using later style steering joint # 224825, WC when using later style steering joint # 224825, WD, WD45 Diesel, WF when using later style steering joint # 224825. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref. 70224890) $11.60

$photo of The measurements on the bearing are 1-17\32 inches inside diameter, 3-9\64 inches outside diameter. Used on 9130, 9150, 9630, 9635, 9650, 9655. Replaces OEM numbers JD8524, 158363A, 662519R1, 71131910, 88128R, 88128RA, 72161731$
Allis Chalmers PTO Output Shaft Bearing - The measurements on the bearing are 1-17\32 inches inside diameter, 3-9\64 inches outside diameter. Used on 9130, 9150, 9630, 9635, 9650, 9655. Replaces OEM numbers JD8524, 158363A, 662519R1, 71131910, 88128R, 88128RA, 72161731 (Item #: 114890, Ref. 88128R) $15.90

Allis Chalmers King Pin Thrust Bearing - Used on Carraro 4WD Axles, this King Pin Thrust Bearing (Trunion Bearing) replaces OEM numbers 5119699, 05119699, TX51785, OSA 206S, OSA206S (Item #: 156139, Ref. 5119699) $106.00

Allis Chalmers Rod Bearings - Rod Bearing in .010. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-010. (Item #: 105981) $13.00

Allis Chalmers Rod Bearing - Rod Bearing in .020. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-020. (Item #: 105982) $14.10

Allis Chalmers Rod Bearings - Rod Bearing in .030. For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Sold individually. Replaces YTO CRK190XT-030. (Item #: 105983) $10.70

Allis Chalmers Rod Bearing Pair - Single Rod Bearing in 0.010 (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Journal measures 1.927 inches. Replaces YTO CB-179P-010 and 70223639. (Item #: 105872) $17.30

Allis Chalmers Rod Bearing Pair - Single Rod Bearing in 0.020 (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Journal measures 1.917 inches. Replaces YTO CB-179P-020 and 70223640. (Item #: 105873) $17.50

Allis Chalmers Rod Bearing Pair - Single Rod Bearing in 0.030 (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Journal measures 1.907 inches. Replaces YTO CB-179P-030 and 70223632. (Item #: 105874) $22.87

Allis Chalmers Main Bearings - .020 Oversize - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74025273, 74035043 (Item #: 105971) $331.00

Allis Chalmers Main Bearings - .030 Oversize - For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 with 426 Diesel Engine. Replaces 74025273, 74035043 (Item #: 105972) $264.00

Allis Chalmers Main Bearing Set, .010 Oversize - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. 74062171 (Item #: 105990) $149.00

Allis Chalmers Main Bearing Set, .020 Oversize - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. (Item #: 105991) $165.00

Allis Chalmers Main Bearing Set, .030 Oversize - For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. (Item #: 105992) $176.00

Allis Chalmers Rod Bearing Pair, .010 - For G with Continental N-62. FOR HORIZONTAL SPLIT RODS. .010 oversize. Rod Bearing pair, 4 required per engine. YTO CB-345P (Item #: 105886) $29.90

Allis Chalmers Rod Bearing Pair, .020 - For G with Continental N-62. FOR HORIZONTAL SPLIT RODS. .020 oversize. Rod Bearing pair, 4 required per engine. YTO CB-345P (Item #: 105887) $38.80

Allis Chalmers Rod Bearing Pair, .030 - For G with Continental N-62. FOR HORIZONTAL SPLIT RODS. .030 oversize. Rod Bearing pair, 4 required per engine. YTO CB-345P (Item #: 105888) $29.90

Allis Chalmers Main Bearings - .010 Oversize - This Main Bearing Set is complete with Thrust Bearings for G with Continental N-62. .010 Oversize Main Bearing Set for 1 engine. (Item #: 105894) $128.00

Allis Chalmers Main Bearings - .020 Oversize - This Main Bearing Set is complete with Thrust Bearings for G with Continental N-62. .020 Oversize Main Bearing Set for 1 engine. (Item #: 105895) $128.00

$photo of <UL> <li>For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel)<\li> <li>Compatible with Allis Chalmers Construction and industrial models AT40, AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F30, F40, F50, F50 (Diesel), F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30 (Diesel), FDX40 (Diesel), FDX50 (Diesel), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP40 (Gas), FP50 (Gas), FP60 (Gas), FP70 (Gas), FP80 (Gas), HD3, TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel)<\li> <li>Compatible with Allis Chalmers Engine (s) 153 (Gas), 175 (Diesel), 230 (Diesel), 230 (Gas), 262 (Diesel), 262 (Gas)<\li> <li>Replaces Allis Chalmers OEM number 74517335, D4517335<\li> <li>Bearing size: .030 oversize<\li> <li>Sold per journal <\li> <li>For Standard connecting rod bearing use Item #: 105919<\li> <\UL>$
Allis Chalmers Connecting Rod Bearing - .030 inch Oversize - Journal - For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) Compatible with Allis Chalmers Construction and industrial models AT40, AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F30, F40, F50, F50 (Diesel), F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30 (Diesel), FDX40 (Diesel), FDX50 (Diesel), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP40 (Gas), FP50 (Gas), FP60 (Gas), FP70 (Gas), FP80 (Gas), HD3, TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel) Compatible with Allis Chalmers Engine (s) 153 (Gas), 175 (Diesel), 230 (Diesel), 230 (Gas), 262 (Diesel), 262 (Gas) Replaces Allis Chalmers OEM number 74517335, D4517335 Bearing size: .030 oversize Sold per journal For Standard connecting rod bearing use Item #: 105919 (Item #: 105918) $27.40

$photo of <UL> <li>For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel)<\li> <li>Compatible with Allis Chalmers Construction and industrial models AT40, AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F30, F40, F50, F50 (Diesel), F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30 (Diesel), FDX40 (Diesel), FDX50 (Diesel), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP40 (Gas), FP50 (Gas), FP60 (Gas), FP70 (Gas), FP80 (Gas), HD3, TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel)<\li> <li>Compatible with Allis Chalmers Engine (s) 153 (Gas), 175 (Diesel), 230 (Diesel), 230 (Gas), 262 (Diesel), 262 (Gas)<\li> <li>Bearing size: .040 oversize<\li> <li>Sold per journal <\li> <li>For Standard connecting rod bearing use Item #: 105918<\li> <\UL>$
Allis Chalmers Connecting Rod Bearing - .040 inch Oversize - Journal - For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) Compatible with Allis Chalmers Construction and industrial models AT40, AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F30, F40, F50, F50 (Diesel), F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30 (Diesel), FDX40 (Diesel), FDX50 (Diesel), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP40 (Gas), FP50 (Gas), FP60 (Gas), FP70 (Gas), FP80 (Gas), HD3, TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel) Compatible with Allis Chalmers Engine (s) 153 (Gas), 175 (Diesel), 230 (Diesel), 230 (Gas), 262 (Diesel), 262 (Gas) Bearing size: .040 oversize Sold per journal For Standard connecting rod bearing use Item #: 105918 (Item #: 105919) $21.50

No
Picture
Allis Chalmers Main Bearings - .020 inch Oversize - Set - For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel) Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel) Bearing size: .020 oversize Sold in complete sets For Standard main bearing use Item #: 105935 (Item #: 105933) $289.00

$photo of <UL> <li>For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel)<\li> <li>Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel)<\li> <li>Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel)<\li> <li>Bearing size: .030 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105935<\li> <\UL>$
Allis Chalmers Main Bearings - .030 inch Oversize - Set - For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel) Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel) Bearing size: .030 oversize Sold in complete sets For Standard main bearing use Item #: 105935 (Item #: 105934) $215.00

$photo of <UL> <li>For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel)<\li> <li>Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel)<\li> <li>Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel)<\li> <li>Bearing size: .040 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105934<\li> <\UL>$
Allis Chalmers Main Bearings - .040 inch Oversize - Set - For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel) Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel) Bearing size: .040 oversize Sold in complete sets For Standard main bearing use Item #: 105934 (Item #: 105935) $220.00

$photo of <UL> <li>For Allis Chalmers tractor models D17, WC, WD, WD45, 170<\li> <li>Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12<\li> <li>Compatible with Allis Chalmers Engine (s) 201, 226<\li> <li>Bearing size: .002 oversize<\li> <li>Sold per journal<\li> <li>For Standard connecting rod bearing use Item #: 105946<\li> <\UL>$
Allis Chalmers Connecting Rod Bearing - .002 inch Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170 Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12 Compatible with Allis Chalmers Engine (s) 201, 226 Bearing size: .002 oversize Sold per journal For Standard connecting rod bearing use Item #: 105946 (Item #: 105942) $17.60

$photo of <UL> <li>For Allis Chalmers tractor models D17, WC, WD, WD45, 170<\li> <li>Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12<\li> <li>Compatible with Allis Chalmers Engine (s) 201, 226<\li> <li>Bearing size: .030 oversize<\li> <li>Sold per journal <\li> <li>For Standard connecting rod bearing use Item #: 105946<\li> <\UL>$
Allis Chalmers Connecting Rod Bearing - .030 inch Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170 Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12 Compatible with Allis Chalmers Engine (s) 201, 226 Bearing size: .030 oversize Sold per journal For Standard connecting rod bearing use Item #: 105946 (Item #: 105945) $16.30

$photo of <UL> <li>For Allis Chalmers tractor models D17, WC, WD, WD45, 170<\li> <li>Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12<\li> <li>Compatible with Allis Chalmers Engine (s) 201, 226<\li> <li>Bearing size: .040 oversize<\li> <li>Sold per journal <\li> <li>For Standard connecting rod bearing use Item #: 105945<\li> <\UL>$
Allis Chalmers Connecting Rod Bearing - .040 inch Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170 Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12 Compatible with Allis Chalmers Engine (s) 201, 226 Bearing size: .040 oversize Sold per journal For Standard connecting rod bearing use Item #: 105945 (Item #: 105946) $17.60

$photo of <UL> <li>For Allis Chalmers tractor models WC, WD, WD45<\li> <li>Compatible with Allis Chalmers Engine (s) 201, 226<\li> <li>Bearing size: .040 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105950<\li> <\UL>$
Allis Chalmers Main Bearings - .040 inch Oversize - Set - For Allis Chalmers tractor models WC, WD, WD45 Compatible with Allis Chalmers Engine (s) 201, 226 Bearing size: .040 oversize Sold in complete sets For Standard main bearing use Item #: 105950 (Item #: 105951) $171.00

$photo of <UL> <li>For Allis Chalmers tractor models D17, 170<\li> <li>Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12<\li> <li>Compatible with Allis Chalmers Engine (s) 226 (Gas)<\li> <li>Bearing size: .030 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105954<\li> <\UL>$
Allis Chalmers Main Bearings - .030 inch Oversize - Set - For Allis Chalmers tractor models D17, 170 Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12 Compatible with Allis Chalmers Engine (s) 226 (Gas) Bearing size: .030 oversize Sold in complete sets For Standard main bearing use Item #: 105954 (Item #: 105955) $65.00

$photo of <UL> <li>For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070<\li> <li>Compatible with Allis Chalmers Engine (s) 670HI, 670I <li>Replaces Allis Chalmers OEM number 74036428<\li> <\li> <li>Compatible with Gleaner Combine (s) N5, N6<\li> <li>Bearing size: .030 oversize<\li> <li>Sold per journal <\li> <li>For Standard connecting rod bearing use Item #: 105964<\li> <\UL>$
Allis Chalmers Connecting Rod Bearing - .030 - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 Compatible with Allis Chalmers Engine (s) 670HI, 670I Replaces Allis Chalmers OEM number 74036428 Compatible with Gleaner Combine (s) N5, N6 Bearing size: .030 oversize Sold per journal For Standard connecting rod bearing use Item #: 105964 (Item #: 105967) $7.98

$photo of <UL> <li>For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070<\li> <li>Compatible with Allis Chalmers Engine (s) 670HI, 670I <li>Replaces Allis Chalmers OEM number 74025025, 74025238<\li> <\li> <li>Compatible with Gleaner Combine (s) N5, N6<\li> <li>Sold as complete set<\li> <li>Set includes: 1 front bearing 74025025, 5 rear and intermediate 74025238<\li> <\UL>$
Allis Chalmers Camshaft Bearing Set - Standard - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 Compatible with Allis Chalmers Engine (s) 670HI, 670I Replaces Allis Chalmers OEM number 74025025, 74025238 Compatible with Gleaner Combine (s) N5, N6 Sold as complete set Set includes: 1 front bearing 74025025, 5 rear and intermediate 74025238 (Item #: 105973) $83.58

$photo of <UL> <li>For Allis Chalmers tractor models 6060, 6070, 6080<\li> <li>Compatible with Allis Chalmers Engine (s) 433 (diesel)<\li> <li>Replaces Allis Chalmers OEM number 74006055<\li> <li>Bearing size: .010 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105988<\li> <\UL>$
Allis Chalmers Main Bearings - .010 inch Oversize - Set - For Allis Chalmers tractor models 6060, 6070, 6080 Compatible with Allis Chalmers Engine (s) 433 (diesel) Replaces Allis Chalmers OEM number 74006055 Bearing size: .010 oversize Sold in complete sets For Standard main bearing use Item #: 105988 (Item #: 105986) $177.00

$photo of <UL> <li>For Allis Chalmers tractor models 6060, 6070, 6080<\li> <li>Compatible with Allis Chalmers Engine (s) 433 (diesel)<\li> <li>Replaces Allis Chalmers OEM number 74006056<\li> <li>Bearing size: .020 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105988<\li> <\UL>$
Allis Chalmers Main Bearings - .020 inch Oversize - Set - For Allis Chalmers tractor models 6060, 6070, 6080 Compatible with Allis Chalmers Engine (s) 433 (diesel) Replaces Allis Chalmers OEM number 74006056 Bearing size: .020 oversize Sold in complete sets For Standard main bearing use Item #: 105988 (Item #: 105987) $102.00

$photo of <UL> <li>For Allis Chalmers tractor models 6060, 6070, 6080<\li> <li>Compatible with Allis Chalmers Engine (s) 433 (diesel)<\li> <li>Replaces Allis Chalmers OEM number 74006057<\li> <li>Bearing size: .030 oversize<\li> <li>Sold in complete sets<\li> <li>For Standard main bearing use Item #: 105987<\li> <\UL>$
Allis Chalmers Main Bearings - .030 inch Oversize - Set - For Allis Chalmers tractor models 6060, 6070, 6080 Compatible with Allis Chalmers Engine (s) 433 (diesel) Replaces Allis Chalmers OEM number 74006057 Bearing size: .030 oversize Sold in complete sets For Standard main bearing use Item #: 105987 (Item #: 105988) $41.00

No
Picture
Allis Chalmers Main Bearings - .030 - For Allis Chalmers tractor models 5040, 5045, 5050 Replaces Allis Chalmers OEM number 1901806, 72094358 Compatible with Hesston tractor models 580, 680, 780, 880-5, 980 Compatible with Minneapolis Moline tractor models G450 Compatible with Oliver tractor models 1255, 1265, 1270, 1355, 1365, 1370 Compatible with White tractor models 2-50, 2-60 Bearing size: .030 oversize Sold per journal (Item #: 106047) $19.10

$photo of <UL> <li>For Allis Chalmers tractor models 160, 6040 <\li> <li>Compatible with Massey Ferguson tractor models 135, 150, 154, 230, 235, 240, 245, 250<\li> <li>Compatible with Massey Ferguson Combine (s) 40<\li> <li>Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30B, 30E, 30H, 40, 200, 200B, 2135, 2200, 2244, 2500, 4500<\li> <\UL>$
Allis Chalmers Camshaft Bearing - For Allis Chalmers tractor models 160, 6040 Compatible with Massey Ferguson tractor models 135, 150, 154, 230, 235, 240, 245, 250 Compatible with Massey Ferguson Combine (s) 40 Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30B, 30E, 30H, 40, 200, 200B, 2135, 2200, 2244, 2500, 4500 (Item #: 107236) $9.50

$photo of <UL> <li>For Allis Chalmers tractor models 6060, 6070<\li> <li>Replaces Allis Chalmers OEM number 500028400, VLD3314<\li> <\UL>$
Allis Chalmers PTO Release Bearing - For Allis Chalmers tractor models 6060, 6070 Replaces Allis Chalmers OEM number 500028400, VLD3314 (Item #: 113753) $55.00

$photo of <UL> <li>For Allis Chalmers tractor models B (s\n 100-later), C, CA, IB, RC<\li> <li>Compatible with Allis Chalmers Engine (s) 125 (gas)<\li> <li>Bore: 3.375 <\li> <li>Compression Ratio: 6.25:1<\li> <li>Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals<\li> <li>Kit does not include connecting rod or main bearings<\li> <li>For 3.437 overbore engine kit use Item #: 105878<\li> <li>Additional Handling and Oversize Fees Apply To This Item<\li> <\UL>$
Allis Chalmers Engine Rebuild Kit - Less Bearings, 125 - For Allis Chalmers tractor models B (s\n 100-later), C, CA, IB, RC Compatible with Allis Chalmers Engine (s) 125 (gas) Bore: 3.375 Compression Ratio: 6.25:1 Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For 3.437 overbore engine kit use Item #: 105878 Additional Handling and Oversize Fees Apply To This Item (Item #: 130496) $451.00

$photo of <UL> <li>For Allis Chalmers tractor models D10, D12, D14, D15 (Series I, s\n 9000-earlier))<\li> <li>Compatible with Allis Chalmers Engine (s) 138 (gas), 149 (gas)<\li> <li>Bore: 3.562 <\li> <li>Compression Ratio: 7.50:1<\li> <li>Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals<\li> <li>Kit does not include connecting rod or main bearings<\li> <li>For standard connecting rod bearing use Item #: 105910<\li> <\UL>$
Allis Chalmers Engine Rebuild Kit - Less Bearings - 3.562 inch Overbore, 138, 149 - For Allis Chalmers tractor models D10, D12, D14, D15 (Series I, s\n 9000-earlier)) Compatible with Allis Chalmers Engine (s) 138 (gas), 149 (gas) Bore: 3.562 Compression Ratio: 7.50:1 Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For standard connecting rod bearing use Item #: 105910 (Item #: 130497) $759.00

$photo of <UL> <li>For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580<\li> <li>Compatible with Allis Chalmers Construction and industrial models 7GB<\li> <li>Compatible with Allis Chalmers Engine (s) D3400 (diesel), D3500 (diesel), D3700 (diesel), D3750 (diesel), 670HI (diesel), 670I (diesel), 670T (diesel) <\li> <li>Compatible with Gleaner Combine (s) L, L2 (engine s\n 70-25867-earlier)<\li> <li>Bore: 4.125 <\li> <li>Piston Pin Diameter: 1.500 <\li> <li>Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals<\li> <li>Kit does not include connecting rod or main bearings<\li> <li>For cam bearings use Item #: 105972<\li> <\UL>$
Allis Chalmers Engine Rebuild Kit - Less Bearings, D3400, D3500, D3700, D3750, 670HI - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580 Compatible with Allis Chalmers Construction and industrial models 7GB Compatible with Allis Chalmers Engine (s) D3400 (diesel), D3500 (diesel), D3700 (diesel), D3750 (diesel), 670HI (diesel), 670I (diesel), 670T (diesel) Compatible with Gleaner Combine (s) L, L2 (engine s\n 70-25867-earlier) Bore: 4.125 Piston Pin Diameter: 1.500 Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For cam bearings use Item #: 105972 (Item #: 130503) $1429.01

$photo of <UL> <li>For Allis Chalmers tractor model WD45<\li> <li>Compatible with Allis Chalmers Engine (s) 230 (diesel)<\li> <li>3.562 overbore<\li> <li>Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals<\li> <li>Kit does not include connecting rod or main bearings<\li> <li>For Standard connecting rod bearing use Item #: 105934<\li> <\UL>$
Allis Chalmers Engine Rebuild Kit - Less Bearings, 230 - For Allis Chalmers tractor model WD45 Compatible with Allis Chalmers Engine (s) 230 (diesel) 3.562 overbore Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For Standard connecting rod bearing use Item #: 105934 (Item #: 130507) $1419.01

No
Picture
Allis Chalmers Engine Rebuild Kit - Less Bearings, Perkins, A3.152 - For Allis Chalmers tractor models 160, 6040 Compatible with Massey Ferguson tractor models 35, 50 Compatible with Massey Ferguson Construction and industrial models 203, 205 Compatible with Perkins Engine (s) A3.152 (diesel, indirect injection, s\n 1935854-later) Flat top piston .145 sleeve flange thickness Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For thrust washer set use Item #: 107165 Additional Handling and Oversize Fees Apply To This Item (Item #: 130509) $194.00

$photo of <UL> <li>For Allis Chalmers tractor models 6060, 6070, 6080<\li> <li>Compatible with Allis Chalmers Harvester (s) 880<\li> <li>Compatible with Allis Chalmers Construction and industrial models I600, 615, 650, 653<\li> <li>Compatible with Allis Chalmers Engine (s) D2200 (diesel), 433I (diesel), 433T (diesel) <\li> <li>Compatible with Gleaner Combine (s) F2, F3, K2<\li> <li>Bore: 3.875 <\li> <li>Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals<\li> <li>Kit does not include connecting rod or main bearings<\li> <li>For pin bushings use Item #: 105988<\li> <\UL>$
Allis Chalmers Engine Rebuild Kit - Less Bearings, D2200, 433I, 433T - For Allis Chalmers tractor models 6060, 6070, 6080 Compatible with Allis Chalmers Harvester (s) 880 Compatible with Allis Chalmers Construction and industrial models I600, 615, 650, 653 Compatible with Allis Chalmers Engine (s) D2200 (diesel), 433I (diesel), 433T (diesel) Compatible with Gleaner Combine (s) F2, F3, K2 Bore: 3.875 Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For pin bushings use Item #: 105988 (Item #: 130517) $900.00

$photo of <UL> <li>For Allis Chalmers tractor models 4W-220, 8030, 8050, 8070<\li> <li>Compatible with Allis Chalmers Engine (s) 670H, 670I, 670T <\li> <li>Compatible with Gleaner Combine (s) L2 (engine s\n 70-25867-later), L3, N5, N6, R5, R6<\li> <li>Bore: 4.250 <\li> <li>Piston pin: 1.750 <\li> <li>Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals<\li> <li>Kit does not include connecting rod or main bearings<\li> <li>For piston pin bushings use Item #: 105972<\li> <\UL>$
Allis Chalmers Engine Rebuild Kit - Less Bearings, 670H, 670I, 670T - For Allis Chalmers tractor models 4W-220, 8030, 8050, 8070 Compatible with Allis Chalmers Engine (s) 670H, 670I, 670T Compatible with Gleaner Combine (s) L2 (engine s\n 70-25867-later), L3, N5, N6, R5, R6 Bore: 4.250 Piston pin: 1.750 Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals Kit does not include connecting rod or main bearings For piston pin bushings use Item #: 105972 (Item #: 130518) $1509.01

$photo of <UL> <li>For Allis Chalmers tractor models 5040, 5045, 5050 <li>Replaces Allis Chalmers OEM number 72091587<\li> <\li> <li>Compatible with Long tractor models 310, 350, 360, 445, 460, 510, 610, 2360, 2460, 2510, 2610<\li> <li>Replaces Long OEM number TX51692<\li> <li>Replaces OEM number 24903450, 32012<\li> <\UL>$
Allis Chalmers Tapered Roller Bearing W\ Cup - For Allis Chalmers tractor models 5040, 5045, 5050 Replaces Allis Chalmers OEM number 72091587 Compatible with Long tractor models 310, 350, 360, 445, 460, 510, 610, 2360, 2460, 2510, 2610 Replaces Long OEM number TX51692 Replaces OEM number 24903450, 32012 (Item #: 156178) $46.50

$photo of <UL> <li>For Allis Chalmers tractor models 5050, 6060, 6070, 6080 <li>Replaces Allis Chalmers OEM number 71355915, 72090766<\li> <\li> <li>Compatible with Oliver tractor models 1265, 1270, 1365, 1370 <li>Replaces Oliver OEM number 24903470<\li> <\li> <li>Compatible with White tractor models 2-50, 2-60, 700<\li> <li>Replaces White OEM number 31-2900283<\li> <li>Replaces Long OEM number TX51794<\li> <li>Replaces Massey Ferguson OEM number 3383324M1<\li> <li>I.D.: 70 mm<\li> <li>O.D.: 110 mm<\li> <li>Width: 25 mm<\li> <\UL>$
Allis Chalmers Tapered Roller Bearing and Cup - For Allis Chalmers tractor models 5050, 6060, 6070, 6080 Replaces Allis Chalmers OEM number 71355915, 72090766 Compatible with Oliver tractor models 1265, 1270, 1365, 1370 Replaces Oliver OEM number 24903470 Compatible with White tractor models 2-50, 2-60, 700 Replaces White OEM number 31-2900283 Replaces Long OEM number TX51794 Replaces Massey Ferguson OEM number 3383324M1 I.D.: 70 mm O.D.: 110 mm Width: 25 mm (Item #: 156179) $64.00

$photo of <UL> <li>For Allis Chalmers tractor models 9435, 9455, 9635, 9655, 9675, 9695, 9755, 9765, 9775, 9785, 9815 <li>Replaces Allis Chalmers OEM number 1822389C91<\li> <\li> <li>Compatible with International Engine (s) DT466 (E)<\li> <li>Replaces International OEM number 1822389C91<\li> <li>Width: 1.4400 <\li> <\UL>$
Allis Chalmers Rod Bearing - Standard - For Allis Chalmers tractor models 9435, 9455, 9635, 9655, 9675, 9695, 9755, 9765, 9775, 9785, 9815 Replaces Allis Chalmers OEM number 1822389C91 Compatible with International Engine (s) DT466 (E) Replaces International OEM number 1822389C91 Width: 1.4400 (Item #: 166260) $10.50

No
Picture
Allis Chalmers Clutch Release Bearing - For Allis Chalmers tractor model 7000 (s\n 8001-earlier) Compatible with Case tractor model 970, 1030, 1070, 1090, 1170, 1175, 1470 Compatible with Ford tractor model Dexta, Super Dexta, 600, 800, 900, 2000, 2100, 2110, 2300, 2310, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4100, 4110, 4400, 4410, 4500, 4600, 4610, 5000, 5100, 5200, 5340, 5600, 5610, 5900, 6600, 6610, 6700, 6710 Replaces John Deere OEM number N1585 (Item #: 166353) $20.76

No
Picture
Allis Chalmers Bearing - For Allis Chalmers tractor model 5020 (with Adjustable Front) Replaces Allis Chalmers OEM number 1109045, 72098356 I.D.: 0.984 O.D.: 2.047 Width: 0.59 (Item #: 173596) $24.98

No
Picture
Allis Chalmers Hydraulic Pump Bearing - For Allis Chalmers tractor models 190 (gas s\n 26855-earlier), 190 (diesel s\n 26857-earlier), 190XT (diesel s\n 26612-earlier) Replaces Allis Chalmers OEM number 70234692 Used to repair OEM 70248735 triple hydraulic pump (Item #: 174270) $4.98

No
Picture
Allis Chalmers Wheel Hub Bearing - For Allis Chalmers tractor models 5020, 5030 Replaces Allis Chalmers OEM number 72098661 Inside Diameter: 1.2590 Outside Diameter: 2.5590 (Item #: 174334) $21.10

No
Picture
Allis Chalmers Main Bearings - .020 inch Oversize - Set - For Allis Chalmers tractor models D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070 Replaces Allis Chalmers OEM number 74061650, 74061816 Set Includes: 6 Main Bearings and 1 Thrust Washer Bearing Size: .020 Oversize (Item #: 174362) $288.00

$photo of <UL> <li>For Allis Chalmers tractor models 5040, 5050, 6060, 6070 <\li> <li>Compatible with Long tractor models 350, 360, 360C, 445, 445SD, 445V, 460, 460SD, 460V, 510, 550, 560 <li>Replaces Long OEM number TX50405, TX51844<\li> <\li> <li>Compatible with Oliver tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370 <\li> <li>Compatible with White tractor models 2-50<\li> <li>Replaces Carraro manufacturer number CAR27307<\li> <li>Replaces Case IH OEM number 26799990<\li> <li>Replaces Massey Ferguson OEM number 390859X1<\li> <li>Replaces New Holland OEM number 83930328<\li> <li>Replaces Bearing number 30211<\li> <li>Inside Diameter: 55 mm<\li> <li>Outside Diameter: 100 mm<\li> <li>Width: 22.75 mm<\li> <\UL>$
Allis Chalmers Bearing - For Allis Chalmers tractor models 5040, 5050, 6060, 6070 Compatible with Long tractor models 350, 360, 360C, 445, 445SD, 445V, 460, 460SD, 460V, 510, 550, 560 Replaces Long OEM number TX50405, TX51844 Compatible with Oliver tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370 Compatible with White tractor models 2-50 Replaces Carraro manufacturer number CAR27307 Replaces Case IH OEM number 26799990 Replaces Massey Ferguson OEM number 390859X1 Replaces New Holland OEM number 83930328 Replaces Bearing number 30211 Inside Diameter: 55 mm Outside Diameter: 100 mm Width: 22.75 mm (Item #: 176134) $17.98

No
Picture
Allis Chalmers Bearing Retainer, Used - For Allis Chalmers tractor models D17, D19, 170, 175Replaces Allis Chalmers OEM nos 70235252Replaces Allis Chalmers Casting nos AM4984Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 454138) $40.01

Allis Chalmers Clutch Release Throw Out Bearing - Greaseable - Compatible with Allis Chalmers Construction & Industrial(s) HD3, HD4. Compatible with Allis Chalmers Tractor(s) B, C, CA, D10, D12, D14, D15, D17, D19, 180, 185, 190, 190XT, 200. Replaces Allis Chalmers OEM nos 70235079 (Item #: 113482) $19.10

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy