FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers Tractor Drawbar

Click here to see parts by model

Allis Chalmers Drawbar - Drawbar for tractor models 175, 180. 28 inches long, 1.25 inches thick, 2 inches wide, 25.5 inches center-to-center on holes. (Item #: 165137, Ref. VPL4434) $66.00

$photo of For CAT I drawbars only (drawbars that are 1 inch thick x 2-1\2 inch width) . Prevents drawbar from rotating.$
Allis Chalmers Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1\2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref. 49A29) $26.10

Allis Chalmers Drawbar - 52.25 inches long, 2.50 inches wide, 1.250 inches high with holes at 1.720 inches, 4.331 inches, 5.692 inches, 8.332 inches from front. For tractor models 190, 190XT, 200, 7000, D19. Additional $30 shipping due to weight. (Item #: 110133, Ref. 70239813) $311.00

Allis Chalmers Drawbar, Standard - 2.50 inches wide, 1.250 inches thick, 50.50 inches long. For tractor models 170, 175, 180, 185, (D17 series IV). (Item #: 110437, Ref. 70254452) $179.00

$photo of For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating.$
Allis Chalmers Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref. DBL2) $33.30

Allis Chalmers Drawbar Yoke Assembly - Complete assembly for tractor models D14, D15 D17 Series I, II and III with snap couplet hitch. This is Heavy Duty for D14 and D15 models. Replaces: 70231146, 70232073, 70232074, 70224650, 232074, 231146, 232073, 224650 (Item #: 126332, Ref. 232074) $308.00

Allis Chalmers Drawbar Guide Assembly - This Drawbar Guide Assembly fits WD and WD45. It replaces original part numbers 223187, 226522 and 7022652. (Item #: 126339, Ref. 70226522) $233.04

$photo of Universal Category I Drawbar Measures: (A) 1-7\64 inches thick, (B) 2-3\8 inches wide, (C) 20-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 2-1\32 inches from body edge to center of first body hole, (F) 3-3\32 inch center to center between holes, (G) 7\8 inch end pin, (H) Five 25\32 inch holes.$
Allis Chalmers Drawbar, Universal Cat I, 20-1\2 Inch - Universal Category I Drawbar Measures: (A) 1-7\64 inches thick, (B) 2-3\8 inches wide, (C) 20-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 2-1\32 inches from body edge to center of first body hole, (F) 3-3\32 inch center to center between holes, (G) 7\8 inch end pin, (H) Five 25\32 inch holes. (Item #: 179615, Ref. S.49123) $60.00

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 25-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-29\64 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Seven 25\32 inch holes.$
Allis Chalmers Drawbar, Universal Cat I, 25-1\2 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 25-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-29\64 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Seven 25\32 inch holes. (Item #: 178799, Ref. S5009) $40.40

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 29-3\4 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-1\2 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Nine 25\32 inch holes.$
Allis Chalmers Drawbar, Universal Cat I, 29-3\4 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 29-3\4 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-1\2 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Nine 25\32 inch holes. (Item #: 178800, Ref. S128196) $48.80

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-1\8 inches center to center on lower link pins, (D) 2-1\16 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Eleven 25\32 inch holes.$
Allis Chalmers Drawbar, Universal Cat I, 30-1\8 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-1\8 inches center to center on lower link pins, (D) 2-1\16 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Eleven 25\32 inch holes. (Item #: 103174, Ref. S125) $44.30

$photo of Universal Category II Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 25\32 inch holes.$
Allis Chalmers Drawbar, Universal Cat II, 30-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 25\32 inch holes. (Item #: 103176, Ref. S126) $58.00

$photo of Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 36-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3-7\8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Thirteen 3\4 inch holes.$
Allis Chalmers Drawbar, Universal Cat II, 36-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 36-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3-7\8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Thirteen 3\4 inch holes. (Item #: 103177, Ref. S60156) $71.00

$photo of Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 3\4 inch holes.$
Allis Chalmers Drawbar, Universal Cat II, 30-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 3\4 inch holes. (Item #: 103176, Ref. S60155) $58.00

$photo of <UL> <li>For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050<\li> <li>Replaces Allis Chalmers OEM number 2658105, 2692234, 2725045, 702658105, 702692234, 70272504, 702725045<\li> <li>Length: 62-7\8 <\li> <li>Width: 3 <\li> <li>Height: 1-5\8 <\li> <\UL>$
Allis Chalmers Drawbar - For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050 Replaces Allis Chalmers OEM number 2658105, 2692234, 2725045, 702658105, 702692234, 70272504, 702725045 Length: 62-7\8 Width: 3 Height: 1-5\8 (Item #: 111319) $430.00

No
Picture
Allis Chalmers Drawbar - Straight - For Allis Chalmers tractor models 6070 (s\n 1188-later), 6080 (s\n 6500-later) Replaces Allis Chalmers OEM number 72094177 Length: 35.870 Width: 2.750 Thickness: 1.687 Additional Handling and Oversize Fees Apply To This Item (Item #: 167449) $299.00

No
Picture
Allis Chalmers Front Drawbar Pin - For Allis Chalmers tractor models 6070 (s\n 1188-later), 6080 (s\n 6500-later) Replaces Allis Chalmers OEM number 72094029 Length: 5.25 Diameter: 1.10 (Item #: 174329) $78.00

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy