FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers Tractor Gear

Click here to see parts by model

Allis Chalmers Ring Gear, Flywheel - Has 139 teeth, 14.0625 inch outside diameter. For D17, 170, 175 all with gas engine, W225 serial number PU96714 and up with gas engine. Flywheel Ring Gear. (Item #: 113676, Ref. 70226830) $39.60

Allis Chalmers First and Second Mainshaft Gear - For tractor models D17, 170, 175. First and Second Mainshaft Gear. (Item #: 172764, Ref. 70232532) $174.00

Allis Chalmers Second Mainshaft Gear - For model 175. Second mainshaft Gear. (Item #: 172629, Ref. 70255333) $197.00

Allis Chalmers Second Mainshaft Gear - For tractor models D17, 170. Second Mainshaft Gear. (Item #: 172765, Ref. 70232408) $224.00

Allis Chalmers Sliding Gear Transmission Mainshaft - For tractor models 180, 185, 190, 190XT, 200. Sliding Gear Transmission Mainshaft. (Item #: 163406, Ref. 70246535) $214.00

Allis Chalmers Reverse Gear - For D17, 180, 185, 190, 190XT, 200, (170, 175 without shutle clutch). Reverse Gear. (Item #: 167877, Ref. 70232529) $189.00

Allis Chalmers Second Gear - For tractor models 180, 185, 190, 190XT, 200. Second Gear. (Item #: 163408, Ref. 70246531) $218.00

Allis Chalmers Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both serial number 127007 and up). Third and Fourth Gear Coupling (Item #: 172618, Ref. 70232452) $140.00

$photo of For tractor models D17 serial number 24001 to 71326, D19 up to serial number 15151, 170, 175. Third Gear has 27\8 Teeth. VERIFY TOOTH COUNT.$
Allis Chalmers Third Gear - For tractor models D17 serial number 24001 to 71326, D19 up to serial number 15151, 170, 175. Third Gear has 27\8 Teeth. VERIFY TOOTH COUNT. (Item #: 172763, Ref. 70240940) $287.00

Allis Chalmers Third Gear - For tractor models 180, 185, 190, 190XT, 200. Third Gear. (Item #: 163407, Ref. 70246529) $183.00

Allis Chalmers Third Gear Transmission Countershaft - For tractor models 180, 185, 200, (190, 190XT serial number above 9001). (Item #: 112374, Ref. 70246543) $155.00

Allis Chalmers Ring Gear, Flywheel - This ring gear has 86 Teeth. For model G with Continental N-62 Engine. Replaces 70800311, 800311. (Item #: 100079, Ref. R0583) $74.00

Allis Chalmers Ring Gear, Flywheel - This ring gear has 90 teeth. For B, C, CA. Inside diameter 10.645 inch, outside diameter 11.43 inch, .50 inch thick. (Item #: 100080, Ref. 70209292) $31.50

Allis Chalmers Ring Gear - Starter Flywheel Ring Gear. For tractor models WC, WD, WD45, WF. 12.68 inches outside diameter. 11.725 inside diameter. .50 inch thick, 100 tooth. (Item #: 100081, Ref. 70208132) $47.30

Allis Chalmers Gear Shift Boot - This is an Original Style Gear Shift Boot. For Allis-Chalmers models B, C, CA, WC, WD, WD45, D10, D12, D14, and D15. (Item #: 107809, Ref. R4457) $9.50

Allis Chalmers Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Item #: 121931, Ref. 226023) $7.30

Allis Chalmers Fairbanks Morse, End Cap Less Gear - Services Fairbanks Morse Magneto: FM-JF2, FM-J4 magnetos. Tractors: B, C, CA, WC, RC, WD, U, UC. (Item #: 185930, Ref. CX2430) $109.94

Allis Chalmers Crankshaft, Timing Gear - 27 teeth, For tractor models (D17, 170, 175, all gas), (W226, WD45 all gas engine serial number 45-11050. Inside diameter is 1.625 inches. (Item #: 172456, Ref. 70230217) $155.00

$photo of Has 116 teeth, outside diameter 11.12 inches, inside diameter 10.86 inch. Fits D10 (serial number 3501>), D12 (serial number 3001>), D14 (serial number 19001>), D15 (Gas\LP).$
Allis Chalmers Ring Gear, Flywheel - Has 116 teeth, outside diameter 11.12 inches, inside diameter 10.86 inch. Fits D10 (serial number 3501>), D12 (serial number 3001>), D14 (serial number 19001>), D15 (Gas\LP). (Item #: 113677, Ref. 70233196) $44.10

Allis Chalmers Camshaft Timing Gear - 54 teeth. 1.623 inch inside diameter press on style. For tractor models 170, 175, D17, W201 all with gas engines, and (W226, WD45 gas engine serial number 45-48556 and up). Replaces 70203923, 227038, 70227038, casting number: AM4175-1. (Item #: 113935, Ref. 70227038) $213.00

Allis Chalmers Gear, 2ND, Pinion Shaft - 41 tooth. For tractor models CA serial number 13291 and up, D10, D12, D14, D15. Replaces 70228290. (Item #: 172469, Ref. 70234168) $206.00

$photo of 2-1\16 inches bottom inside diameter, 11\16 inch hole diameter. For model G.$
Allis Chalmers Gear Shift Boot - 2-1\16 inches bottom inside diameter, 11\16 inch hole diameter. For model G. (Item #: 107043, Ref. 800354) $7.98

Allis Chalmers Gear, 3rd, Main Shaft - 30 tooth. For tractor models CA, D10, D12, D14, D15. (Item #: 172444, Ref. 70225413) $79.98

Allis Chalmers Gear, 4th, Pinion Shaft - 24 tooth. For tractor models (CA serial number 13291 and up), D10, D12, D14, D15. (Item #: 107021, Ref. 70228294) $159.00

Allis Chalmers Gear, 1st, Pinion Shaft - 50 tooth. For tractor models (CA serial number 13291 and up), (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 serial number up to 17565). (Item #: 172484, Ref. 70228296) $156.00

Allis Chalmers Gear, Reverse Idler - 21 tooth. For tractor models CA, (D10 serial number 3501 and up), (D12 serial number 3001 and up), (D14 serial number 19001 and up), D15. (Item #: 110974, Ref. 70232498) $170.00

Allis Chalmers Gear, Reverse, Pinion Shaft - 30 tooth. For tractor models (CA serial number 13291 and up), (D10 serial number 7760 and up), (D12 serial number 6091 and up), D14, D15. (Item #: 126602, Ref. 70241367) $164.00

Allis Chalmers Gear Shift Boot - For tractor models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 115401, Ref. 233767) $9.10

No
Picture
Allis Chalmers Ring Gear, Flywheel - This ring gear is for tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Item #: 159150, Ref. 74001167) $77.00

Allis Chalmers Gear Collar, 3rd and 4th - 15 outer teeth, 12 inner teeth, .838 inch wide. For tractor models 190XT, 190XT III, (200 serial number 4001 and up). (Item #: 172449, Ref. 70257033) $117.00

$photo of 24\20 tooth. For tractor models WC, WF, (WD, WD45 serial number up to 127007).$
Allis Chalmers Gear, Reverse Idler - 24\20 tooth. For tractor models WC, WF, (WD, WD45 serial number up to 127007). (Item #: 70226113) $77.00

Allis Chalmers Gear, Reverse Countershaft - For tractor models 180, 185, (190 serial number 9001 and up), 200. (Item #: 167876, Ref. 70246545) $153.00

Allis Chalmers Gear, Reverse - 24 tooth. For model 7000. (Item #: 172432, Ref. 70261963) $173.00

Allis Chalmers Pinion Shaft Gear, 3rd - 37 tooth. Also replaces 228293, 233997, 234575. For tractor models CA, D10, D12, 6090, D14, D15. (Item #: 126601, Ref. 70225831) $204.22

Allis Chalmers Governor Gear - This new Governor Gear fits tractor models D17, 170 and 175 tractors with 226 cubic inch 4 cylinder gas with engines. Replaces: 229510, 70229510, Casting Number: AM4479 (Item #: 178939, Ref. 70229510) $141.00

Allis Chalmers Gear Shift Lever - This Curved Gear Shift Lever fits Allis Chalmers; WD above serial number 127006, and the WD45. It replaces original part numbers 227321, 257580, 70227321, 70257580. Does not include pins. (Item #: 111029, Ref. 70257580) $128.00

Allis Chalmers Gear Shift Lever Washer And Snap Ring Kit - This Gear Shift Lever Washer and Snap Ring Kit retains the gear shift lever into the housing. It measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. Fits: B, C, CA, D10, D12, D14, D15, ED40, G, WC, WD, WD45, WF. Replaces retainer: 207772, 70207772 and snap ring: 207771, 202875, 70202875. (Item #: 129237, Ref. 70202875) $15.60

Allis Chalmers Gear Shift Lever Pins - These Standard Gear Shift Lever Pins are 0.325 inches wide on the square end and 0.250 inch round pin diameter. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 203465, 70203465. Price is for two. (Item #: 153119, Ref. 70203465) $11.20

Allis Chalmers Ring Gear, Flywheel - This Flywheel Ring Gear has 110 teeth. Replaces 04602143, 4602143, 4602143, 153623541, 153623568, 82982157, 0673743, 0673742 (Item #: 159146, Ref. 676786A) $46.70

Allis Chalmers Oil Pump Idler Gear - This Oil Pump Idler Gear has 21 teeth. It is used on Allis Chalmers 160 and 6040 Diesel tractors. Replaces 72080195, 2080195, 41115025 (Item #: 170489, Ref. 733551M92) $38.60

Allis Chalmers Flywheel Ring Gear - This Flywheel Ring Gear has 93 teeth. It is used on Allis Chalmers D10 to serial number 3500, D12 to serial number 3000, and D14 to serial number 9000. Replaces part number 70233305 (Item #: 164571, Ref. 70233305) $94.00

Allis Chalmers Gear Shift Boot - Designed to replace original dual lever boots on Allis Chalmers 6060, 6070, 6080 tractors, this boot is also used on Fiat models: 1180, 1280, 1380, 1580, 1880, 580, 680, 780, 880, 980. Replaces 5100995, 05100995 (Item #: 172518, Ref. 5100995) $33.90

Allis Chalmers Governor Gear Bushing - Mounted in front of the engine block, this Governor Gear Bushing measures: 1.881 inches outside diameter, 0.564 inches wide, and 1.752 inches inside diameter. It is used on Allis Chalmers B, C, CA, D10, D12, D14, D15, IB, RC, D272. Replaces 207466, 210689, 70210689 (Item #: 165362, Ref. 70210689) $25.50

No
Picture
Allis Chalmers Main Shaft Reverser Gear - For Allis Chalmers tractor models D10, D12, D14, D15 Replaces Allis Chalmers OEM number 70234028 Teeth: 19 (Item #: 107017) $144.00

No
Picture
Allis Chalmers Main Shaft, 2nd Gear - For Allis Chalmers tractor models D10, D12, D14, D15 Replaces Allis Chalmers OEM number 70234167 Teeth: 26 (Item #: 107019) $124.00

No
Picture
Allis Chalmers Main Shaft, 4th Gear - For Allis Chalmers tractor models D10, D12, D14, D15 Replaces Allis Chalmers OEM number 70225414 Teeth: 49 (Item #: 107020) $133.00

$photo of <UL> <li>For Allis Chalmers tractor models WD, WD45<\li> <li>Replaces Allis Chalmers OEM number 70227323, 227323<\li> <li>33 \ 19 Teeth<\li> <\UL>$
Allis Chalmers Intermediate PTO Drive Gear - For Allis Chalmers tractor models WD, WD45 Replaces Allis Chalmers OEM number 70227323, 227323 33 \ 19 Teeth (Item #: 111284) $53.98

$photo of <UL> <li>For Allis Chalmers tractor models D10, D12, D14, D15<\li> <li>Replaces Allis Chalmers OEM number 228296<\li> <li>50 Teeth<\li> <\UL>$
Allis Chalmers 1st Pinion Shaft Gear - For Allis Chalmers tractor models D10, D12, D14, D15 Replaces Allis Chalmers OEM number 228296 50 Teeth (Item #: 111925) $160.00

$photo of <UL> <li>For Allis Chalmers tractor models WC, WD<\li> <li>Replaces Allis Chalmers OEM number 70203236<\li> <\UL>$
Allis Chalmers PTO Idler Gear - For Allis Chalmers tractor models WC, WD Replaces Allis Chalmers OEM number 70203236 (Item #: 120107) $214.00

$photo of <UL> <li>For Allis Chalmers tractor models B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070<\li> <li>Replaces Allis Chalmers OEM number 70203465, 203465<\li> <li>Pin Measures 0.325 Wide Square End, 0.285 Round Pin Diameter <\li> <li>Used to tighten up worn shift lever.<\li> <li>Must be ground to fit existing worn lever.<\li> <li>Sold in pairs<\li> <li>For Standard Size Pins use Item #: 153119<\li> <\UL>$
Allis Chalmers Gear Shift Lever Pins - Pair - For Allis Chalmers tractor models B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070 Replaces Allis Chalmers OEM number 70203465, 203465 Pin Measures 0.325 Wide Square End, 0.285 Round Pin Diameter Used to tighten up worn shift lever. Must be ground to fit existing worn lever. Sold in pairs For Standard Size Pins use Item #: 153119 (Item #: 129236) $16.00

$photo of <UL> <li>For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220<\li> <li>Replaces Allis Chalmers OEM number 250488, 70250488<\li> <\UL>$
Allis Chalmers Tachometer Gear and Shaft - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220 Replaces Allis Chalmers OEM number 250488, 70250488 (Item #: 154690) $14.98

$photo of <UL> <li>For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220<\li> <li>Replaces Allis Chalmers OEM number 70250487, 250487<\li> <\UL>$
Allis Chalmers Tachometer Drive Gear and Shaft - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220 Replaces Allis Chalmers OEM number 70250487, 250487 (Item #: 154691) $17.50

$photo of <UL> <li>For Allis Chalmers tractor models CA, D10, D12, D14, D15<\li> <li>Replaces Allis Chalmers OEM number 70228291, 70225829<\li> <\UL>$
Allis Chalmers Pinion Shaft Gear 2nd and 3rd - For Allis Chalmers tractor models CA, D10, D12, D14, D15 Replaces Allis Chalmers OEM number 70228291, 70225829 (Item #: 155082) $192.00

No
Picture
Allis Chalmers Flywheel Ring Gear - For Allis Chalmers tractor models 180, 190, 190XT Replaces Allis Chalmers OEM number 74020211 143 Teeth (Item #: 164572) $123.00

No
Picture
Allis Chalmers Flywheel Ring Gear - For Allis Chalmers tractor models 185, 190, 190XT, 200, 7000, 7010, 7020, 8010 Replaces Allis Chalmers OEM number 74023904 Compatible with Gleaner Combine (s) F, F2, G, L, L2, L3, M, M2, M3 Replaces Gleaner OEM number 74023904 114 Teeth (Item #: 164573) $85.00

No
Picture
Allis Chalmers Hydraulic Pump Gear Plate - For Allis Chalmers tractor models 190 (gas s\n 26855-later), 190 (diesel s\n 26857-later), 190XT (diesel s\n 26612-later), 200, 210, 220 Replaces Allis Chalmers OEM number 70250351 Used to repair OEM 70257005 dual hydraulic pump (Item #: 174274) $218.00

No
Picture
Allis Chalmers Second Gear, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200Replaces Allis Chalmers OEM number 70246531Teeth: 31 and 15For a new version of this item use Item #: 163408Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 436331) $130.01

No
Picture
Allis Chalmers Countershaft Reverse Gear, Used - For Allis Chalmers tractor models 180, 185, 190 (s\n 9001-later), 200Replaces Allis Chalmers OEM number 70246545For a new version of this item use Item #: 167876Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437465) $80.01

No
Picture
Allis Chalmers Third Gear, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200Replaces Allis Chalmers OEM number 70246529Teeth: 27 and 15For a new version of this item use Item #: 163407Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 436330) $106.01

No
Picture
Allis Chalmers Intermediate Drive Gear, Used - For Allis Chalmers tractor models WD, WD45Replaces Allis Chalmers OEM number 70227323, 227323Teeth: 19 and 33For a new version of this item use Item #: 111284Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435541) $95.01

No
Picture
Allis Chalmers Gear Mainshaft, Used - For Allis Chalmers tractor models 180, 185, 190, 190XT, 200Replaces Allis Chalmers OEM number 70246535For a new version of this item use Item #: 163406Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437479) $110.01

No
Picture
Allis Chalmers Countershaft Gear - 3rd, Used - For Allis Chalmers tractor models 190 (s\n 9001-later), 200Replaces Allis Chalmers OEM number 70246543Teeth: 23For a new version of this item use Item #: 112374Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437481) $72.01

No
Picture
Allis Chalmers Countershaft Gear 3rd, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XTReplaces Allis Chalmers OEM nos 70247728, 70240939Teeth: 23Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437484) $256.01

No
Picture
Allis Chalmers Reverse Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190 (s\n 9001-earlier), 190XT (s\n 9001-earlier)Replaces Allis Chalmers OEM nos 70232530Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437485) $189.01

No
Picture
Allis Chalmers Pinion Gear, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 180 (s\n 12800-earlier), 185 (s\n 12800-earlier), 190, 190XTReplaces Allis Chalmers OEM nos 70227644Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437608) $89.01

No
Picture
Allis Chalmers Driven Gear, Used - For Allis Chalmers tractor models D17, WD, WD45, 170, 175, 190, 190XTReplaces Allis Chalmers OEM nos 70232409Teeth: 37Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437606) $165.01

No
Picture
Allis Chalmers PTO Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175Replaces Allis Chalmers OEM nos 70231944Teeth: 55Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453932) $125.01

$photo of <UL><li>For Allis Chalmers tractor models 170, 175<li>Replaces Allis Chalmers OEM number 70251060, 734738M91<\li><\li><li>Compatible with Massey Ferguson tractor models 30, 31, 165, 174-4, 175, 180, 184-4, 194-4, 255, 261, 265, 265S, 270, 274-4, 275, 282, 283, 285S, 290, 294-4 (s\n 223000321-earlier), 374S (s\n D03066-earlier), 384S (s\n D03066-earlier), 394S (s\n D03066-earlier), 670, 690, 3050, 3060, 4225, 4235, 4240<\li><li>Compatible with Massey Ferguson Construction and industrial models 50C, 50D, 50E, 50F, 50H, 50HX, 60, 60H, 220, 6500<\li><li>Compatible with Massey Ferguson Hay Cutting(s) 885<\li><li>Replaces Massey Ferguson OEM nos 734738M91<\li><li>Replaces Casting nos 31171500<\li><li>Teeth: 63<\li><li>For a new version of this item use Item #: 167783<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Allis Chalmers Idler Gear, Used - For Allis Chalmers tractor models 170, 175Replaces Allis Chalmers OEM number 70251060, 734738M91Compatible with Massey Ferguson tractor models 30, 31, 165, 174-4, 175, 180, 184-4, 194-4, 255, 261, 265, 265S, 270, 274-4, 275, 282, 283, 285S, 290, 294-4 (s\n 223000321-earlier), 374S (s\n D03066-earlier), 384S (s\n D03066-earlier), 394S (s\n D03066-earlier), 670, 690, 3050, 3060, 4225, 4235, 4240Compatible with Massey Ferguson Construction and industrial models 50C, 50D, 50E, 50F, 50H, 50HX, 60, 60H, 220, 6500Compatible with Massey Ferguson Hay Cutting(s) 885Replaces Massey Ferguson OEM nos 734738M91Replaces Casting nos 31171500Teeth: 63For a new version of this item use Item #: 167783Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 446639) $58.01

No
Picture
Allis Chalmers Camshaft Gear, Used - For Allis Chalmers tractor models D21, 4W-220, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070Replaces Allis Chalmers OEM nos 74036496Replaces Allis Chalmers Casting nos 4029001-08Teeth: 52Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453683) $135.01

No
Picture
Allis Chalmers Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19, WD (s\n 127007-later), WD45 (s\n 127007-later), 170, 175Replaces Allis Chalmers OEM nos 70226718Teeth: 40Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453861) $480.01

No
Picture
Allis Chalmers Main Shaft Gear - 1st and 2nd, Used - For Allis Chalmers tractor models D17, WD (s\n 127007-later), WD45 (s\n 127007-later), 170, 175Replaces Allis Chalmers OEM number 70232532Teeth: 34For a new version of this item use Item #: 172764Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453863) $103.01

No
Picture
Allis Chalmers Intermediate Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 180, 185, 190, 190XT, 200Replaces Allis Chalmers OEM nos 70231941Teeth: 27Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 454691) $134.01

No
Picture
Allis Chalmers PTO Gear Cover, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175Replaces Allis Chalmers OEM nos 70229299Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453972) $35.01

No
Picture
Allis Chalmers Idler Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175Replaces Allis Chalmers OEM nos 70231942Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 454696) $100.01

No
Picture
Allis Chalmers 2nd Speed Mainshaft Gear, Used - For Allis Chalmers tractor model 175Replaces Allis Chalmers OEM number 70255333OD: 29 TeethID: 10 TeethFor a new version of this item use Item #: 172629Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 455539) $112.01

No
Picture
Allis Chalmers Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19 (s\n 15151-earlier), 170, 175Replaces Allis Chalmers OEM number 70240940Teeth: 27For a new version of this item use Item #: 172763Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453866) $173.01

No
Picture
Allis Chalmers Flywheel Ring Gear, Used - For Allis Chalmers tractor models B, C, CAReplaces Allis Chalmers OEM number 70209292, 209292Teeth: 90Outside Diameter: 11.43 Inside Diameter: 10.645 For a new version of this item use Item #: 100080Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 455260) $19.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy