FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case Tractor Drawbar

Click here to see parts by model

No
Picture
Case Drawbar Bracket - For 730, 830, 930, 1030 for these models without Three Point Hitch. (Item #: 173063, Ref. A57201) $165.00

No
Picture
Case Drawbar Bracket - For tractor models 770, 870, 970, 1070, 1175 With Three Point Hitch (Item #: 108959, Ref. A59603) $354.00

No
Picture
Case Drawbar - Drawbar For 970, 1070 45.875 inch Long, 2.5 inch Wide, 1.25 inch High, 1.067 inch Diameter Front Hole (Item #: 165848, Ref. A65750) $195.00

Case Drawbar - For tractor models 1270 SN# 8717277-Up, 1370, 1570, 2390, 2394, 2590, 2594, 53 inch Long, 3 inch Wide, 1.281 inch Diameter Hole At 1.75 inch From end. Replaces A160849, A63591, A65753 (Item #: 110209, Ref. A160849) $208.94

$photo of For CAT I drawbars only (drawbars that are 1 inch thick x 2-1\2 inch width) . Prevents drawbar from rotating.$
Case Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1\2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref. 49A29) $26.10

$photo of For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating.$
Case Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref. DBL2) $37.00

$photo of Universal Category I Drawbar Measures: (A) 1-7\64 inches thick, (B) 2-3\8 inches wide, (C) 20-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 2-1\32 inches from body edge to center of first body hole, (F) 3-3\32 inch center to center between holes, (G) 7\8 inch end pin, (H) Five 25\32 inch holes.$
Case Drawbar, Universal Cat I, 20-1\2 Inch - Universal Category I Drawbar Measures: (A) 1-7\64 inches thick, (B) 2-3\8 inches wide, (C) 20-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 2-1\32 inches from body edge to center of first body hole, (F) 3-3\32 inch center to center between holes, (G) 7\8 inch end pin, (H) Five 25\32 inch holes. (Item #: 179615, Ref. S.49123) $60.00

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 25-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-29\64 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Seven 25\32 inch holes.$
Case Drawbar, Universal Cat I, 25-1\2 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 25-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-29\64 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Seven 25\32 inch holes. (Item #: 178799, Ref. S5009) $40.30

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 29-3\4 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-1\2 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Nine 25\32 inch holes.$
Case Drawbar, Universal Cat I, 29-3\4 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 29-3\4 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-1\2 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Nine 25\32 inch holes. (Item #: 178800, Ref. S128196) $48.80

$photo of Universal Category II Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 25\32 inch holes.$
Case Drawbar, Universal Cat II, 30-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 25\32 inch holes. (Item #: 103176, Ref. S126) $58.00

$photo of Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 36-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3-7\8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Thirteen 3\4 inch holes.$
Case Drawbar, Universal Cat II, 36-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 36-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3-7\8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Thirteen 3\4 inch holes. (Item #: 103177, Ref. S60156) $95.30

$photo of Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 3\4 inch holes.$
Case Drawbar, Universal Cat II, 30-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 3\4 inch holes. (Item #: 103176, Ref. S60155) $58.00

No
Picture
Case Drawbar - For Case tractor models 1896, 2090, 2094, 2290, 2294 Compatible with Case IH tractor models 1896, 2096, 2294 Replaces Case IH OEM number A137939 4) holes - 1.500 , 5.500 , 7.000 , and 8.750 from front 55.785 Long 2.500 Wide 1.250 Thick (Item #: 110002) $163.00

$photo of <UL> <li>For Case tractor models 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2290, 2294, 2390, 2394, 2590, 2594, 3294 <li>Replaces Case OEM number A61557<\li> <\li> <li>Compatible with Case IH tractor models 1896, 2096, 2294, 2394, 2594, 3294, 3394, 3594<\li> <li>Used with OEM drawbar A160824<\li> <\UL>$
Case Drawbar Hammerstrap - For Case tractor models 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2290, 2294, 2390, 2394, 2590, 2594, 3294 Replaces Case OEM number A61557 Compatible with Case IH tractor models 1896, 2096, 2294, 2394, 2594, 3294, 3394, 3594 Used with OEM drawbar A160824 (Item #: 110391) $180.00

$photo of <UL> <li>For Case tractor models 770, 870, 970, 1070, 1175<\li> <li>Replaces Case OEM number A65762, A59605<\li> <\UL>$
Case Drawbar Pin - For Case tractor models 770, 870, 970, 1070, 1175 Replaces Case OEM number A65762, A59605 (Item #: 161631) $38.50

$photo of <UL><li>For Case tractor models 1270, 1370, 1570, 2390, 2394, 2590, 2594<\li><li>Compatible with Case IH tractor models 3394, 3594<\li><li>Replaces OEM number A65753, A160849<\li><li>Length: 53 <\li><li>Width: 3 <\li><li>Height: 1.750 <\li><li>4.25 Offset<\li><li>1.281 Diameter Hole, 1.75 From End<\li><li>For a new version of this item use Item #: 110209<\li><li>Additional Handling and Oversize Fees Apply To This Item<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Case Drawbar, Used - For Case tractor models 1270, 1370, 1570, 2390, 2394, 2590, 2594Compatible with Case IH tractor models 3394, 3594Replaces OEM number A65753, A160849Length: 53 Width: 3 Height: 1.750 4.25 Offset1.281 Diameter Hole, 1.75 From EndFor a new version of this item use Item #: 110209Additional Handling and Oversize Fees Apply To This ItemUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 410209) $125.01

No
Picture
Case Drawbar Pivot Bracket, Used - For Case tractor models 1896, 2094, 2096, 2294Replaces Case OEM nos A162815Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 437373) $176.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy