International Harvester / Farmall Cub 185 Lo-Boy Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Clutch
Clutch Brake Puck - Plastic/Friction Pad. 0.6485 inch diameter body, 0.925 inch total length. Friction material out 0.115 inch from body and 0.500 inch diameter. Sold individually, 2 used per tractor. Replaces: 404642R1. (Item #: 126193, Ref: 404642R1) $16.00
Clutch disc - 5 1/2 inch new clutch disc, Spline DIAMETER: 0.9375 inch, spline COUNT : 10. Fits Cub Lo-Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 154346, Ref: 404640R93) $46.20
Clutch Drive Shaft - Clutch Drive Shaft. Fits tractor models Cub 154 Lo-Boy without creeper gear, serial number 18709 and up, Cub 185 Lo-Boy all without creeper. Oiled steel 1.060 inch diameter x 29 inches long total. Replaces: 543603R1. (Item #: 178505, Ref: 543603R1) $230.00
Clutch Drive Shaft - This Clutch Drive Shaft is 22-5/8 inches long. Fits Cub 154 Lo-Boy serial number 18709 and up with creeper drive, and all Cub 185 Lo-Boy with creeper drive. Replaces: 543679R1. (Item #: 126131, Ref: 543679R1) $315.00
Clutch Kit - This single stage clutch kit contains a new pressure plate assembly (404639R94), a new 5 1/2 inch, 10 spline, 15/16 inch hub, woven clutch disc (404640R93), new pilot bushing (251266R1), and alignment tool. Release Bearing NOT included. For tractor models Cub 154 Lo-Boy, 184, 185 Lo-Boy. (Item #: 176735, Ref: 404639KLB) $126.00
Pilot Bushing - This Pilot Bushing is Bronze and has a 0.875 inch outside diameter, is 0.750 inches long with a 0.625 inch inside diameter. Fits Cub Lo-Boy 154 and Cub Lo-Boy 185. Replaces 404666R1. (Item #: 179346, Ref: 404666R1) $12.60
Pressure Plate - This 7 Inch Pressure Plate is superior to the original as it is made with ductile iron instead of grey iron, increasing the tensile strength by over 100% and more importantly allowing for a significant yield strenth. Cast iron is not flexible and shatters easily, whereas ductile iron is more flexible and elastic. This pressure plate does not include the bushing or the clamping bolt. Does not include 404666R1 Bushing or 531619R1 Bolt. Replaces: 531708R11 (Item #: 178917, Ref: 531708R11) $124.00
Pressure Plate Bolt and Nut - The Pressure Plate Bolt and Nut is used with 531708R11 Pressure Plate. (Item #: 179287, Ref: 531619R1) $10.80
Release Bearing With Release Carrier - Fits 154, 185. This will NOT fit a Cub Lo-Boy 184. Has 10-32 Grease zerk fitting (Item #: 111033, Ref: 404671R1) $80.00
Remanufactured Pressure Plate - Remanufactured Pressure Plate: 5 1/2 inches with 3 springs. Fits Cub Lo-Boy, Cub 154-Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 206062, Ref: 404639-R) $99.01

Cooling System
Fan Belt - This Fan Belt measures 0.453 inches wide X 48.57 inches circumference Polyester Cord Cogged. Replaces T626T, 157538AA, 527621R1, 71146702, 1146702, 13481, 257480, 308484, 619485, 7480 Please verify measurements before ordering (Item #: 115935, Ref: 15480) $9.40
Radiator - This new Radiator is used on International Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 404547R1, 404547R2, 404547R3 (Item #: 125372, Ref: 404547R3) $457.08
Radiator Cap, Pressurized - 7 psi cap for radiators with 3/4 inch deep filler neck, 2.33 inch outside diameter, 2.0 inch tang to tang, 1.096 inches tall. For model Cub 1975 to 1979 serial number 248125 and up, also fits older Cubs if pressurized system is desired, (Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy to use original cover you must drill 2 holes in the wings of the cap to mount the cover). (Item #: 173447, Ref: 404548R1) $7.30
Radiator Hose, Lower - Our new lower radiator hose has an inside diameter of A - 1.625 inches. This radiator hose fits Cub 154 Lo-Boy, Cub 184 Lo-Boy and Cub 185 Lo-Boy. (Item #: 116356, Ref: 404550R1) $11.40

Decals and Emblems
Hood Ornament - Chrome. Comes with mounting hardware. Fits [Cub Cadet: 70, 71, 72, 73, 100, 102, 104, 105, 122, 123, 124, 125, Cub Cadet (All up to serial number 399999)] International - Fits Cub (serial number 210001 to 248124), Cub Lo-Boy (serial number 10001 and up). As a Radiator Ornament: 154, 184, 185. (Item #: 178498, Ref: 392718R1) $25.10

Drive Train
2nd and 3rd Sliding Gear - This 2nd and 3rd Sliding Gear has 16 and 26 teeth. It fits Cub (serial number 192113 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy Replaces: 364520R1. (Item #: 111923, Ref: 364520R1) $90.00
Creeper Direct Drive Spline Gear - For International / Farmall tractor models Cub 154 (With Creeper (reduction) gear and updated 1/8" keyway), Cub 184, Cub 185 (Lo-Boy, with Creeper (reduction) gear and updated 1/8" keyway), Replaces International OEM number 55370C3, (Item #: 126188) $79.37
Creeper Drive Plate - For International / Farmall tractor models Cub 154 (With Creeper (reduction) gear and updated 1/8" keyway), Cub 184, Cub 185 (Lo-Boy, with Creeper (reduction) gear and updated 1/8" keyway), Replaces International OEM number 532462R2, 6632665, (Item #: 126189) $171.37
Creeper Gear Shaft Spline Drive Gear w/ Bushing - For International / Farmall tractor models Cub 154 (With Creeper (reduction) gear and updated 1/8" keyway), Cub 184, Cub 185 (Lo-Boy, with Creeper (reduction) gear and updated 1/8" keyway), Replaces International OEM number 532461R1, (Item #: 126190) $108.51
Creeper Sun Gear Drive Shaft - For International / Farmall tractor models Cub 154 (With Creeper (reduction) gear and updated 1/8" keyway), Cub 184, Cub 185 (Lo-Boy, with Creeper (reduction) gear and updated 1/8" keyway), Replaces International OEM number 55369C2, (Item #: 150445) $236.44
Final Drive Gasket Set - Contains 1 rear axle houseing oil pan gasket, 1 outer seal cap gasket, 1 inner axle bearing cap gasket and 1 upper differential shaft gasket. Does 1 side, 2 kits needed per tractor. For tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 350820R1, 350823R1 and 350827R1. (Item #: 152606, Ref: 350804R1) $19.98
First and Reverse Shift Fork - For tractor models: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 355600R93, 355600R91, 353270R1, 353042R1, 353044R1, 352772R1. (Item #: 178743, Ref: 355600R92) $92.00
Inner Differential Bearing Retainer Seal - This Inner Differential Bearing Retainer Seal is used in Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, and Cub 185 Lo-Boy. It measures 1.832 inches outside diameter, 1.062 inches inside diameter and is 0.250 inch wide. Two used per tractor. Sold individually. Replaces Replaces: 18674K, 359787R91, 377239R91, 377240R91, 381908R91, 383315R91, 385872R1, 385872R91, 555382R91, 555398R91 (Item #: 178165, Ref: 18674K) $7.20
Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00
Rear Axle Outer Seal - Outer seal, must reuse your seal retainer. For tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 358799R1 and 547431R91. 2.125 inside diameter, 3.066 outside diameter, width is .510 inches. (Item #: 126592, Ref: 350822R91) $18.00
Transmission Case Rear Cover Plate Gasket - This Transmission Case Rear Cover Plate Gasket Fits: Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Lo-Boy. It replaces original part number 350837R3 (Item #: 125607, Ref: 350837R3) $10.40
Transmission Gasket Kit - Cub, Cub Lo-Boy, [Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy (without creeper drive)] Replaces: 350846R1, 350866R1, 351546R1. (Item #: 182468, Ref: 350846R1KIT) $16.90
Transmission Gasket Kit - Cub, Cub Lo-Boy, [Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy (without creeper drive)] Replaces: 350846R1, 350866R1, 351546R1. (Item #: 182468, Ref: 350846R1KIT) $16.90
Transmission Spline Shaft Oil Seal - This Transmission Spline Shaft Oil Seal comes with retainer and gasket. IH changed the seal design from the original leather style. This kit will replace both seals. Replaces 350865R91, 350866R1, 528810R2, 528810R91 (Item #: 178961, Ref: 350865R91) $40.00

Electrical System
Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $120.00
Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.90
Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $9.20
Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $7.70
Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.40
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $195.00
Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00
Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $164.00
Generator, Starter - 12 volt, 15 amp. For tractor models (Cub 154 Lo-Boy 1968-74), (Cub 184 Lo-Boy 1977-80), (Cub 185 Lo-Boy 1974-76). All with C-60 gas engine. Replaces 1101432, 1101698, 1101693. (Item #: 112140, Ref: 1101432) $192.00
Key Switch - This 2 position key switch comes with 1 key and has 3 terminals. Fits a 13/16 inch dash hole. For tractor models (140 from serial number 45001 and up), (Cub from serial number 239827 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 123. (Item #: 164325, Ref: 60736C1) $31.70
Magneto or Distributor Shaft Seal - The Seal measures 3.256 inches outside diameter, 2.063 inches inside diameter, and 0.500 inches wide. It is used as a magneto or distributor drive seal on Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 2511379R1, 251379R91, 450313 (Item #: 172914, Ref: 251379R1) $31.10
Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $31.00

Engine Gaskets
Crankcase Front Cover Gasket - This Front Cover Gasket Fits: Cub (serial number 139517 and up), Cub Lo-Boy, 154, 184, 185; Replaces: 355945R1, 355945R2. (Item #: 179302, Ref: 355945R1) $15.60
Crankshaft Rear Oil Seal Retainer Gasket - This Crankshaft Rear Oil Seal Retainer Gasket is used on Cub, Cub Lo-Boy, U1, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces: 251364R1 (Item #: 179288, Ref: 251364R1) $8.00
Valve Tappet Side Cover Gasket - This Valve Tappet Side Cover Gasket is used on C60 and UC60 engines on Cub, Cub Lo-Boy, U1, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 251371R1 (Item #: 179410, Ref: 251371R1) $11.40

Engine Parts
No Picture Rear Crankshaft Seal Retainer - This Rear Crankshaft Seal Retainer is used on C60 4-Cylinder Gas Engines on Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 251363R1 (Item #: 251363R1) $117.30
Ring Gear, Flywheel - 84 teeth, 8.696 inch inside diameter and 10.678 inch outside diameter. For tractor models Cub, (184 Baler), 55T, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. (Item #: 126491, Ref: 251270R2) $57.00

Engine Pistons and Sleeves
Piston Kit - Raised Pistons .030 - Pistons and Rings Kit for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .030 overbore. from Engine Serial Number 264568. Comes with 4 pistons with piston rings, piston pins and pin retainers. (Item #: 185588, Ref: R8022) $578.00
Piston Kit - Raised Pistons .040 - Pistons and Rings Kit for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .040 overbore. from Engine Serial Number 264568. Comes with 4 pistons with piston rings, piston pins and pin retainers. (Item #: R8023) $303.60
Piston Kit - Raised Pistons .060 - Pistons and Rings Kit for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .060 overbore. from Engine Serial Number 264568. Comes with 4 pistons with piston rings, piston pins and pin retainers. (Item #: R8024) $303.60
Piston - Raised Pistons .020, Single Cylinder - Piston for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .020 overbore. from Engine Serial Number 264568. Comes with 1 piston, piston pins and pin retainers. (Item #: 191133, Ref: R8021) $41.00

Exhaust System
Manifold - This new manifold comes with manifold, gaskets and pipe to connect to the muffler. Fits Cubs with Zenith style carburetors. The pipe has a 1-3/8 inch outside diameter. Replaces 21116R1, 251232R1 and 405023R2. (Item #: 101540, Ref: 405023R2WGP) $88.00

Fuel System / Air Intake
Choke Cable - 31 inches total length. For tractor models Cub 185 Lo-Boy, 184, (Cub 154 Lo-Boy serial number 14536 and up). (Item #: 113593, Ref: 529926R1) $22.70
Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00
Throttle Cable Assembly - This Throttle Cable Assembly with knob has a 37 inch cable length. It fits: Lo-Boy 154 and Lo-Boy 185. Replaces: cable with knob: 404557R91, knob: 530118R1, new cable number: 543920R3. (Item #: 125371, Ref: 543920R3) $66.00

Lights
Light Switch, 12 Volt - For tractor models (Cub serial number 224401 to 227700), (Cub Lo-Boy serial number 18701 to 21575), (140 from serial number 26801 and up), 1206, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, 354, 404, 424, 444, 454, 464, 504, 574, 606, 674, 706, 806, 1256, 2300, 2400A, 2404, 2424, 2444, 2500A, 2504, 2606, 21256, 3444, 4100, 4156, 403. (Item #: 125705, Ref: 376851R91) $31.00
Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Item #: 125705, Ref: 376851R91) $31.00

Oil System
Oil Pressure Switch - For tractor models Cub 154, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2400A, 2500A, 2706, 2756, 2826, 2856, 3388, 3588, 3788, 385, 454, 464, 484, 485, 574, 584, 6388, 6588, 674, 6788, 684, 716, 756, 766, 784, 786, 806, 826, 856, 884, 966, 986, Hydro 100, Cub 185 Lo-Boy. (Item #: 124745, Ref: 3129031R91) $15.00

PTO / Driveline
PTO Clutch Load Spring Plates - Includes two plates. For tractor models Cub 154 Lo-Boy, Cub 185 Lo-Boy. (Item #: 125620, Ref: 527236R1) $44.10
PTO Clutch Output Shaft - For tractor models Cub 154 Lo-Boy, Cub 185 Lo-Boy. Replaces 404917R11. Bearings are 276574R91. (Item #: 125621, Ref: 546651R11) $207.87
PTO Clutch Rebuild Kit - This PTO Clutch Rebuild Kit contains 4 friction discs, 3 separator plates, 8 wavy spring washers, 4 shims. It is used on Cub 154 Lo-Boy and Cub 185 Lo-Boy. It replaces original part number 527245R92 except it does not contain hardware. (Item #: 125622, Ref: 527245R92) $169.00
PTO Drive Clutch Drum - For tractor models Cub 154 Lo-Boy, Cub 185 Lo-Boy. Replaces: 527240R1, 547292R1. (Item #: 125623, Ref: 547292R1) $130.72
PTO Pulley Shield Assembly, 2 Piece - Fits tractors equipped with 3160A mowers. For tractor models Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy with or without 3 point hitch. Replaces 132395C91. (Item #: 125632, Ref: 492970R2) $149.00
PTO V Belt Pulley - When using following rotary mowers: 48 inch, 60 inch, 3142, 3160, 3160A, 3260. For tractor models Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces: 491881R2. (Item #: 182560, Ref: 491881R2) $98.00

Sheet Metal / Body Parts
Dash Cowling - Fiberglass Rear Hood. For tractor models Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. (Item #: 178574, Ref: 404585R2) $142.80
Grill Cowling - Comes primered. FIT TO TRACTOR BEFORE PAINTING. For tractor models Cub 154 Lo-Boy, Cub 185 Lo-Boy. (Item #: 178544, Ref: 404686R1) $254.00
Lower Dash Side Support Panel, LH - For tractor models (Cub 154 Lo-Boy serial number 22332 and up), Cub 185 Lo-Boy. (Item #: 124184, Ref: 404829R2) $42.85
Lower Dash Side Support Panel, RH - For tractor models (Cub 154 Lo-Boy, Cub 185 Lo-Boy right side only), (Cub 184 Lo-Boy right and left side). (Item #: 124183, Ref: 404830R2) $42.85

Steering
Tie Rod - 13 inches long, .5 inch diameter. For tractor models Cub 154, Cub 184, Cub 185 Lo-Boy. (Item #: 104370, Ref: 404546R1) $46.20

Wheels
Front Rim 3 x 12 - This 3 inch by 12 inch rim is for tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. This is 5 bolt with a 3 1/8 inch pilot hole. Bolt holes measure 2 5/8 inch center to center on adjacent holes. Backspacing measures 3 inches. (Item #: 113705, Ref: R2054) $127.00
Universal Parts and Accessories Category: Accessories / Supplies

Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.87
Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.10
Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.60
Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.90
Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80
Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.50
Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.10
Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.10
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.90
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.00
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.40
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.40
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.30
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.60
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.00
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.10
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.30
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.30
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.40
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.60
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.90
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $11.20
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $18.60

Electrical System
NOTE Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.	NOTE
No Picture Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20
No Picture Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.90
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70
No Picture Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20
NOTE Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!	NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $27.00

Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00
Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10
Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges
No Picture Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00
No Picture Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $39.90
Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar
Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $367.00
Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87
Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $440.00
Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $440.00
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System
Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $25.70
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $14.70
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.60
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.60

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50
Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.80
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00
No Picture Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00
No Picture Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48
No Picture Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54
No Picture Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00
No Picture Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61
Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00
No Picture Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights
Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $45.00
Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $42.00
Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70
No Picture Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $42.00
No Picture Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00
Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $390.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00
Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00
No Picture Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40
No Picture Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40
No Picture Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00
No Picture Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20
No Picture Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00
No Picture Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30
No Picture Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00
No Picture Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50
No Picture Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70
No Picture Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00
No Picture Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90
No Picture Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $58.00
No Picture Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30
No Picture Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40
No Picture Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00
No Picture Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30
No Picture Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.50
No Picture Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00
No Picture Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.10
No Picture Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.50
No Picture Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00
No Picture Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70
No Picture Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80
No Picture Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00
No Picture Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30
No Picture Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $16.90
No Picture Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90
No Picture Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $16.90
No Picture Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.90
No Picture Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67
No Picture Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39
No Picture Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $44.10

PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00
NOTE PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.	NOTE
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $279.00