FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall Super A Tractor Parts

[Categories] [All Farmall Models] [Print]

Brakes

Brake Band - Lined Brake Band (1). For A, Super A to serial number 339641, B. If a final drive gasket set is needed, order part number 43245D. Replaces: 51582DDX. (Item #: 105417, Ref: 51582DBX) $40.00

Brake Band - Lined Brake Band (1). For Super A serial number 339642 and up, 100, 130, 140. If a final drive gasket set is needed for SUPER A, order part number 43245D. Replaces 358660R21, 358660R1. (Item #: 105419, Ref: 358660R21) $30.00

Brake Pedal Shaft, LH - Fits A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Item #: 153603, Ref: 51425DX) $171.87

Brake Pedal Shaft, RH - This brake pedal shaft is the right hand side. It is for models A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Item #: 153602, Ref: 51507D) $168.00

Brake Return Spring - For tractor models 100, A, AV, B, BN, Super A, Super AV, 130, 140. Overall length 7 inch, 2 used for brake pedals, 1 used for clutch pedal. (Item #: 125754, Ref: 47845DA) $15.00

Final Drive Gasket Kit - This 4 piece Final Drive Gasket Kit Includes (1) rear axle housing oil pan gasket, (2) rear axle outer bearing retainer gaskets, (1) rear axle housing inner bearing cap gasket. 2 used per tractor, sold individually. Fits: A, AV, B, BN, Super A, Super A1, Super AV, Super AV1; Replaces: 43245D, 47954D, 48009D, 48009DB (Item #: 182489, Ref: 43245D) $22.90

Clutch

Clutch Assembly - For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 all with Rockford Style Clutch. New disc and pressure plate assembly (with narrow style fingers). Spring disc, 9 inch disc with 6 splines 1 1/4 inch hub. New release bearing and new pilot bushing and alignment tool (not shown). This kit will replace the early and late style. If you have the graphite bearing, you will also need the new style bearing sleeve and you can order as part number 375493K-Sleeve. Replaces 375493R91, 56631DB, IHS958. (Item #: 118488, Ref: 375493KSP) $214.00

Clutch Assembly - For tractor models A, B, C, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 all with Rockford Style Clutch. New disc and pressure plate assembly (with narrow style fingers). Solid disc, no springs, 9 inch disc with 6 splines 1 1/4 inch hub. New release bearing and new pilot bushing and alignment tool (not shown). This kit will replace the early and late style. If you have the graphite bearing, you will also need the new style bearing sleeve and you can order as part number 375493K-Sleeve. Replaces 375493R91, 56631DB, IHS958. (Item #: 168845, Ref: 375493K) $205.00

Clutch Disc, 9in. Remanufactured - Remanufactured Clutch disc, 9 inch, 4 button spring loaded, 1.250 inch spline diameter, 6 spline. For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404. There is an additional $20.00 for a core charge. (Item #: 205980, Ref: 384384-R4B) $105.72

Clutch Disc, Remanufactured - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 2404, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 6, Clutch Center: Solid, Clutch Type: Woven, (Item #: 205978) $93.01

Clutch Disc, Remanufactured, 1944203C1 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 2404, Replaces International OEM number 1944203C1, 56631DB, 56631DBC, 56631DBR, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 6, Clutch Center: Spring, Clutch Type: Woven, (Item #: 203374) $109.50

Clutch Disc, Remanufactured, 384384HD6 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 2404, Replaces International OEM number 384384HD6, Clutch Size: 9", Clutch Hub: 1-1/4", Clutch Spline: 6, Clutch Center: Solid, Clutch Type: 6 Lg Pads, (Item #: 205979) $139.01

Clutch, Dust Cover - For tractor models A, B, C, Super A, Super C, 100, 130, 200, 230. Cover is 2 inches outside diameter. Check shape and size before ordering. (Item #: 126137, Ref: 57579DX) $14.90

Clutch Fork, Used - For International tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404, Replaces International OEM nos 47716D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498383) $49.01

Clutch Housing Cover - For A, Super A, AV, B, BN, C, Super C, Cub. Clutch Housing Cover is Oval with Bracket and Screw. Cover is 3 x 4 inches. Check shape and size before ordering. (Item #: 178637, Ref: 57576DX) $22.50

Clutch Housing Cover - For Super A, AV, C, Super C, Cub, 100, 130, 140, 200, 230, 240. Clutch Housing Cover is Round with Bracket and Screw. 4-3/16 inches outside diameter, check shape and size before ordering. (Item #: 178674, Ref: 351486R1) $23.80

Clutch Kit, Remanufactured - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404, Clutch Diameter - 9", Clutch Hub Diameter - 1-1/4", Clutch Splines - 6, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, Flywheel Step 1.188", For Pressure Plate use Item #: 122000, (Item #: 202009) $231.80

Clutch Pressure Plate, 9 - Rockford Style with wide fingers. Fits Models: 100, 130, 140, 200, 230, 240, 2404, 404, A, B, C FARMALL, Super A, Super C. (Item #: 189609, Ref: 361581R91) $237.00

Clutch Release Bearing Carrier - This clutch release bearing carrier is the carrier only, does not include bearing. For tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 (Direct replacement for the following when equipped with replaceable throwout bearing A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C) replaces the graphite style (non-replaceable) throwout bearing and carrier number 350830R31 used on early models. Replaces: 6116D, IHS1155. Uses release bearing part number 361292R91. (Item #: 111782, Ref: 375493K-Sleeve) $86.00

Clutch Release Bearing, Greaseable - For tractor models A, Super A, B, C, Super C, H, Super H, 100, 130, 140, 200, 230, 240, 404, 2404. Bearing is 3.375 inch outside diameter, 2.0625 inch inside diameter. (Item #: 100022, Ref: 361292R91) $25.70

Clutch Release Sleeve and Bearing - Fits, 100 with Ball Bearing Type Clutch Release Bearing, 130, 140, 200 with Ball Bearing Type Clutch Release Bearing, C, Super A. (Item #: 105394, Ref: 364790R91) $138.00

Clutch Release Yoke - This clutch release yoke is 7 5/8 inches overall length. For models A, AI, AV, B, BN, C, Super A, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404. Industrial A1, 2404. Replaces 47716D (Item #: 178919, Ref: 47716D) $62.80

Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404. Replaces 364527R1, 364527R2, 364527R91, 43291D, 716678R91. (Item #: 122000, Ref: 364527R91) $9.30

Transmission Disc, 9 inch - Rockford Style, 6 splines 1.25 inch, spring disc (will replace rigid), fits models: 100, 130, 140, 200, 230, 240, 2404, 404, A, B, C FARMALL, Super A, Super C. (Item #: 118489, Ref: 56631DB) $102.00

Cooling System

Fan Assembly - For tractor models A, Super A serial number 250001-317191, Super AV, Super A1, Super AV-1 (ALL A and Super A series between serial number 250001 and 317191), B, C, Super C. Fan measures 15 5/8 inches, pulleys measure 3 3/4 inch and 3 1/4 inch diameter. Replaces OEM number 701360R91, 131489C91, 70136D, 70212D. (Item #: 100772, Ref: 701360R) $85.00

Fan Belt - This Fan Belt measures 35.00 inches length and 0.700 inch width, For, 130 GAS, 200 GAS, 230 GAS, C GAS with WATER PUMP, Super A GAS serial number 48000 to 48499, Super AV GAS serial number 48000 to 48499, Super C GAS serial number 100001 to 114645, Super C GAS serial number 114646 and up. B with water pump. Please verify measurements before ordering (Item #: 111155, Ref: 60712D) $15.30

Fan Belt - For tractor models A, B, C (with C-113 engine; without water pump), Super A. 3/4 inch x 34 inch. (Item #: 153766, Ref: 46869D) $12.80

Fan Pulley Assembly, Late - This pulley assembly fits Cub and Cub Lo-Boy C-60 engine serial number 165153 and up, Super A with C-113 engine serial number 317192 and up, Super AV and Super AV1 with C-123 engine, Super AV1 with C-113 engine serial number 317192 and up, Super C with C-123 engine, 100 and 130 with C-123 engine, (200, 230 and 240 with C-123 engine below serial number 65000). Fan mounting bolt thread is 12-24 UNC, 3.125 inch bolt pattern. Shaft is 5/8 inch -18 Thread. 4.379 inch outside diameter rear pulley. 4.062 inch outside diameter front pulley. VERIFY MEASUREMENTS. Will not fit 154, 184 or 185. (Item #: 126187, Ref: 131486C91) $156.00

Generator Belt - For tractor models 130, 200, 230, (A, AV serial number 317191 and up), B, BN, Super A, Super AV, (Super C serial number 114646 and up). All with gas engines. 1/2 X 28.125 (Item #: 172686, Ref: 52318DA) $5.90

Radiator - For tractor models Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 200 and 230. This radiator is for PRESSURIZED systems only. Inlet = 2-1/2". Outlet = 2". The core is 16-1/8 inches high and 16 inches wide. NOT FOR EARLY TRACTORS THAT DID NOT HAVE A WATER PUMP. Replaces 356356R96, 358104R93 (Item #: 101710, Ref: 356356R94) $410.00

Radiator - This Radiator fits all A, B and BN models as well as Super AV and Super AV-1. It will fit older non-pressurized systems and is close to, but not exactly like original. For original non-pressurized, see part number 58124DBX. If using this radiator to replaces an older non-pressurized radiator, you will also need to replace the cap with part number RW0021-9 (4 lb cap). If replacing the cap for a pressurized system use cap part number 825702M2 (7 lb cap). Core Height 15 7/8 inches, Core Width 16 inches, Depth 2 inches. Replaces original part numbers 358105R91, 58124DBX (Will need new cap). (Item #: 101706, Ref: 358105R91) $400.00

Radiator - This radiator is for the early models without water pump. Has 2 Inch Inlet and Outlet Tubes. Fits A and AV after serial number 41330, B and BN after serial number 40193, (Super A, Super AV, Super AV-I, all to serial number 355669) all without water pump. Has 2 inch inlet and outlet tubes. Core size is 17 3/8 inches wide X 16 1/2 inches high. Does not come with a cap. Uses Radiator Cap part number 43983D. (Item #: 125004, Ref: 58124DBX) $462.00

Radiator and Air Hose Set - For tractor models A, Super A WITHOUT water pump, B. Radiator and Air Cleaner Hose Kits include Original Whittek Tower Style Hose Clamps. Radiator hoses are 2.25 inches long and 2 inch inside diameter. (Item #: 182510, Ref: R2700) $48.60

Radiator Cap - Fits Super A, Super C, Super H, M, MD, Super M, MD, 4, Super W4, O6, W6, ODS6, Super W6 and WD6, W9, WD9, Super W9 and WD9. Not for short filler neck. (Item #: 112290, Ref: 67448DD) $3.98

Radiator Cap - This is a 4lb Radiator Cap used with 358105R91 when replacing a non-pressurized radiator. (Item #: 178173, Ref: RW0021-9) $8.00

Radiator Cap - This is a 7 pound Radiator Cap used with 358105R91 for a pressurized system. Replaces: 361705R91, 362323R91. (Item #: 169633, Ref: 825702M2) $12.80

Radiator Cap - For tractor models A, Super A, B, C with Non pressurized system. This cap is original style with water imprint. Does not fit our part #358105R91. This cap is used on an original non-pressurized system radiator and the new 58124DBX. (Item #: 112117, Ref: 43983D) $9.50

Radiator Cap With Lever - Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Item #: 110150, Ref: 67448DDWL) $17.00

Radiator Hose - Lower - For International / Farmall tractor models A (s/n 355669-earlier), B, Super A, 140, 240, 404, 424 (gas), 444 (gas), Replaces International OEM number 20075DB, 2" ID, For Hose Clamp use Item #: 130455, (Item #: 112337) $4.30

Tower Hose Clamp 2.685" to 2.995" - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.50

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.70

Water Pump Gasket Set - This set is included with 355760R93 water pump. Set includes 68104C1 and 355769R1. (Item #: 183008, Ref: 68104C1) $10.90

Water Pump - New - With pulley, fits A, B, C and models with C123 Gas Engine: 100, 130, 200 serial number <501-65000, 230 serial number <501-65000, Farmall 240 serial number <501-65000, Super A, Super C. Casting number 367683, 367684 or 372241. (Item #: 107899, Ref: 355760R93) $67.00

Water Pump, Remanufactured, 123868 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 200, 230, 240, Replaces Casting number 123868, Includes Mounting Gasket, With Pulley, (Item #: 206125) $112.01

Decals and Emblems

Decal Set - For model Super A. This is a set of 12 self adhesive decals (McCormick Farmall). These are printed on Mylar, not die cut. (Item #: 101064, Ref: IHCSA) $33.60

Decal Set - For Super A Culti-Vision. Complete Decal Set. (Item #: 101047, Ref: R2434) $56.00

Hood Emblem - For Super A, Super AV, C, Super C. Hood Emblem, "IH". Size is 1 7/8 inch x 2 1/4 inch. (Item #: 103913, Ref: 352580R1) $14.50

$Farmall Super A IH Decal, 1-5\8 inch, Vinyl$
IH Decal, 1-5/8", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.80

IH Decal, 1", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.90

$Farmall Super A IH Decal, 3 inch x 3-1\2 inch, Vinyl$
IH Decal, 3" x 3-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $11.10

$Farmall Super A IH Decal, 4-1\2 inch x 5 inch$
IH Decal, 4-1/2" x 5" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.60

International Decal, 17", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.60

$Farmall Super A International Decal, 8-1\2 inch, Mylar$
International Decal, 8-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.70

International Decal Serial Number Tag - Later Style - For International / Farmall tractor models C (1950 and up), Cub, H, M, Super A (1950 and up), Super A, Super C, Super H, Super M, Super MTA, Model number IHS289B, (Item #: 168699) $24.90

International Decal Set,10" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $29.60

$Farmall Super A International Decal Set, 1 1\4 inch IH Logo, Vinyl$
International Decal Set, 1 1/4" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.80

$Farmall Super A International Decal Set, 1 3\4 inchx 1 5\8 inch IH Logo, Vinyl$
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.70

No
Picture
International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $16.70

No
Picture
International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $22.20

$Farmall Super A International Harvester Decal, 2-3\4 inch x 3 inch$
International Harvester Decal, 2-3/4" x 3" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.70

$Farmall Super A International Harvester Decal, 2 inch x 2-1\2 inch, Mylar$
International Harvester Decal, 2" x 2-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.70

$Farmall Super A International Harvester Decal, 2 inch x 2-1\4 inch, Mylar$
International Harvester Decal, 2" x 2-1/4", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.70

$Farmall Super A International Harvester Decal, 5-1\2 inch x 6 inch, Mylar$
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.60

International Harvester Decal, 5" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.60

International Harvester Decal, 6" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $7.40

$Farmall Super A International Harvester Decal, 7-1\2 inch, Mylar$
International Harvester Decal, 7-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $9.30

International Harvester Decal, 9", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $11.10

$Farmall Super A International Hood Decal, 23-1\2 inch, Vinyl$
International Hood Decal, 23-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $14.80

International McCormick Farmall Decal Set, Super A Culti-Vision, Vinyl - For International / Farmall tractor model Super A, Mylar decal set use Item #: 101047, (Item #: 100918) $93.00

International McCormick Farmall Decal Set, Super AV Culti-Vision, Vinyl - For International / Farmall tractor model Super A, (Item #: 100919) $93.00

International McCormick Farmall Decal Set, Super A, Vinyl - For International / Farmall tractor model Super A, Mylar decal set use Item #: 101064, (Item #: 100935) $93.00

International Super AI Decal Set, Vinyl - For International / Farmall tractor model Super A (I), (Item #: 100964) $89.00

McCormick International Decal, 10" Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $9.30

$Farmall Super A McCormick International Decal, Hood, White\Black, 7-1\4 inch, Vinyl$
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $7.40

Drive Train

Axle Oil Seal - This axle oil seal fits the following tractor models: A, Super A, 100, 130, 140, and Cub. It has an inside diameter of 1.750 inches, an outside diameter of 2.632 inches, and a width of 0.500 inches. It replaces part numbers: 264698R91, 273563R91, 275596R91, 357768R91, 382220R91, 383387R91, and 53599D. (Item #: 182568, Ref: 264698R91) $19.30

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

Gear, Transmission Oiler Slinger - Also replaces 58340D. For tractor models 100, 130, 200, 230, 240 with High Speed and Low Reverse Attachment, A serial number 39022>, B serial number 39022>, A, C, Super A, Super C. (Item #: 172572, Ref: 354643R11) $199.00

Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00

Rear Outer Flanged Axle Seal - This Rear Outer Flanged Axle Seal measures 2.125 inches inside diameter, 3.001 inches outside diameter and 0.434 inches wide. Fits A, AV, B, BN, Super A, Super A1, Super AV, Super AV1. Replaces original part numbers 358767R91, 358810R91, 43283D, 71697C1 (Item #: 167998, Ref: 15287A) $9.60

Rear Stub Axle Felt Washer - This Rear Stub Axle Felt Washer measures 2.920 inches outside diameter, 2.000 inch inside diameter and is 0.375 inches thick. A, AV, B, BN, Super A, Super A1, Super AV, Super AV1. Two used per tractor. Sold individually. Replaces: 15017D, 43242D. (Item #: 178083, Ref: 43242D) $14.20

Seal, Differential Ball Bearing - For tractor models A, A1, AI, AV, B, BN, Super A, Super A1, Super AV, Super AV1, 100, 130, 140. This seal measures 2.378 inches outside diameter, 1.531 inches inside diameter and 0.500 inches wide. wide. 2 used per tractor, sold individually. Replaces: 358773R91, 358813R91, 381742R91, 383340R91, 385865R91, 45175D, 46282D, 71597C1, 71597C91 (Item #: 172757, Ref: 71597C1) $26.30

Transmission Gasket Kit - This three piece Transmission Gasket Kit includes transmission shift cover gasket, transmission spline shaft bearing retainer gasket and counter shaft bearing cage gasket. It fits: A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Replaces original part numbers 1342393C1, 46503D, 47279DA, 47283D, 47283DB (Item #: 178158, Ref: 1342393C1) $26.10

Electrical System

Alternator Bracket Kit - This alternator bracket has a 2 inch gap for the alternator part number 8NE10305SE and will fit the following tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 200, 230, will also work for Power units U2, U2A. (Item #: 127584, Ref: IHALTBKIT) $62.00

Battery Box Panel - Left Hand - For International / Farmall tractor models Super A (s/n 348644-later), Super AV (s/n 348644-later), Super C (s/n 176523-later), 100, 130, 140, 200, 230, Replaces International OEM number 358540R11, Includes clips, (Item #: 104009) $74.17

Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Item #: 154651, Ref: 353875R91) $65.00

Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 154650, Ref: 353874R91) $66.00

Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $120.00

Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $120.00

Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.80

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Item #: 104554, Ref: 1750411M91) $8.50

Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $9.20

Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $7.00

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $108.00

Distributor Drive Housing, Used - For International tractor models C, M, MD, MTA, Super A, Super C, 200, 230, 240, 300, 330, 340, 350, 400, 424, 450, 504, 2404, 2424, 2504, Replaces International OEM number 363763R11, With Tachometer Drive Hole, For a new version of this item use Item #: 178938, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429775) $65.01

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $17.80

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA. All with Delco Vertical Conversion Distributor 1111411). (Item #: 103153, Ref: 1900119) $9.00

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $29.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Distributor Point Set - For J-4 Magneto and IH 353898R1 Distributor. Point Gap = 0.013 inches. Replaces 21A161, 407018R91, 353172R1, 353172R91. (Item #: 111109, Ref: 353172R1) $6.40

Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $50.00 core charge will be added to your order. (Item #: 203587, Ref: 353898R1) $235.01

Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.40

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.80

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Farmall / IH with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. This if for vertical Delco Distributors. Not for IH Distributors or Magnetos. Replaces: 120622, 817363, 1914142, 1914144, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $14.40

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.70

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Distributor with base and tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser, 6V coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203589) $350.01

Distributor with base and tach drive, Used - For International tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser., Does Not Include Coil, For a Remanufactured version of this part use Item #: 203589, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403589) $291.01

Distributor with base less tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203588) $235.01

Distributor with Electronic Ignition - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Item #: 113311, Ref: 107304C91-6V) $655.78

Distributor with Electronic Ignition - 12V - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Item #: 113361, Ref: 107304C91-12V) $674.02

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $195.00

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Item #: 105071, Ref: 1142) $155.00

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $164.00

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Item #: 108148, Ref: 1142P12) $177.00

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with Delco distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Item #: 105072, Ref: 1142P6) $160.00

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.90

Generator Belt - For tractor models (A, AV serial number 250001 to 317191), B, BN, C, Super A, Super AV, (Super C serial number 100001 to 114645) all with gas engines. 1/2 X 26.125. (Item #: 161749, Ref: 49291D) $10.40

No
Picture
Generator - Delco Style (9718), Remanufactured, Delco Remy, 1100501 - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, I9, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, Compatible with International Combine (s) 101, 140, 151, Compatible with International Construction and industrial models T6, Compatible with International Baler (s) 37, 47, 57, Replaces Delco Remy manufacturer number 1100501, Replaces manufacturer number 9718, 340-21, 92-01-3050, Delco Style, Voltage: 6, Rotation: Clockwise, Amperage: 25, Regulator: External, (Item #: 203178) $408.38

H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $24.50

Hand Crank Mounting Bracket - For International / Farmall tractor models A, B, Super A, 100, 130, 140, Replaces International OEM number 350639R91, (Item #: 122097) $28.40

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Item #: 111177, Ref: 62801DC) $10.30

Ignition Switch - This Ignition Switch is for Distributor Ignition Systems. This is a 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Item #: 117579, Ref: R2720) $39.00

Ignition Switch - This Ignition Switch is for Magneto Ignition systems. This switch has only 1 terminal. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub. Replaces 54207DB (Item #: 117580, Ref: R2721) $49.00

Ignition Tune-up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414, I4, I6, MTA, MV, O4, O6, T6, U2, W4, W6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. Not for IH Distributors. (Item #: 103151, Ref: ATK1DCR) $9.50

Lighting Switch Dimmer Resistor - For International / Farmall tractor models A, B, Cub, H, HV, M, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, TD6, TD9, W4, W6, W9, 100, 130, 200, 230, 300, 350, 400, 450, Replaces International OEM number 47889D, Will Not Fit 154, 184, 185, (Item #: 126566) $16.20

Magneto - This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Item #: 180178, Ref: XH1344) $567.00

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $29.50

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.00

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $10.00

Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $11.90

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.90

$Farmall Super A Push\Pull Switch Knob$
Push/Pull Switch Knob - For International / Farmall tractor models A, B, C, Cub, H, HV, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, W4, W6, W9, Replaces International OEM number 8732D, Knob only replacement for push/pull switches, (Item #: 126614) $8.10

No
Picture
Real Light Wire - Cable wire from switch to rear light. Total length of 53". For 300, 350, AV, Super A. Replaces 358117R91 (Item #: 161892, Ref: 358117R91) $26.80

Rotor - Used with Delco distributors 1111411 with a clip held cap. For tractor models: A, I4, AV, Super A, Super AV, Super AV1, B, BN, C, Super C, H, HV, Super H, Super HV, M, Super M, MTA, Super MTA, MV, Super MV, O4, O6, OS4, OS6, T6, W4, W6, 354 (distributors with a tach drive). Replaces 3069778R1. (Item #: 110177, Ref: 1750498M1) $3.60

Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.20

Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $15.20

Starter - This is a new 6 volt starter with Solenoid. It is original equipment on Farmall 140HC and 240. It has a 10 tooth drive with counter clockwise rotation. It replaces; International part number 360606R91, Delco 1107174. Note this starter can also be used for converting earlier tractors with mechanical starter buttons (starters Delco 1107093 and 1107067, IH part numbers 355794R91, 355794R92)to electronic starter with a key or momentary button switch. We do not have wiring instruction for this conversion. Replaces 1107174, 1108098, 360606R91, 370606R91 (Item #: 185608, Ref: 1107174) $305.00

Starter, 6 Volt - For C113 and C123 Gas engines on: A, B, C, Super A, Super C, 100, 130, 140, 200, 230. Replaces Delco 1107093, 1107067, 1108096. (Item #: 109655, Ref: SDR0092) $130.00

Starter, 6 Volt - New 6 volt starter for tractor models A, B, C, Super A, Super C, 100, 140 (to serial number 26800), 200, 230, 240. All 1952-1961 with C113 or C123 gas engines using starter switch mounted to the starter. Replaces Delco 1107093 and 1107067. Replaces IH part numbers 355794R91, 355794R92 Uses 593292C1 starter switch. If you have a solenoid on your starter, this is not the starter you need (see part number 1107174). This starter uses a saddle mounted push button switch. (Item #: 109655, Ref: 1107093R) $130.00

Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Item #: 107059, Ref: 565549) $32.00

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $59.94

Starter Drive Parts - Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $140.00

Starter Drive Spring - Spring, main drive, for starter 77695H. Tractors:Super A, C, Super C, H, M, Super M, 4, W4, 6, W6, Super W6, 100, 130, 140, 300, 330, 340, 350. For 100, 130, 140, 300, 330, 340, 350, 4, 6, C, M, Super C, Super M, Super A, W4, W6 (Item #: 111718, Ref: 1860639) $31.00

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $53.00

Starter Solenoid - Starter solenoid for 6 volt starters A, B, C, Super A, Super C, 100, 140, 200, 230, 240, 300, 340, 350, 400. All 1952-1961 with C113 or C123 gas engines using starter switch mounted to the starter. Replaces 25A266, DR1465. (Item #: 105670, Ref: 142364HA) $20.00

Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Item #: 105669, Ref: 1925781) $9.00

Starting Rod - Starting rod, Pull to start. For Super A, 100, 130. (Item #: 115088, Ref: 350739R2) $22.30

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Item #: 110972, Ref: 1918322) $10.00

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Item #: 117534, Ref: 79407H) $6.50

Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $31.00

Tune-up Kit - This Tune-up Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. Note, not for British Delco Distributors 7953342. (Item #: 173738, Ref: MFITK10) $27.30

Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $40.10

Tune-up Kit, Basic - This basic tune-up kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Item #: 105572, Ref: ATK5BIR) $14.10

Voltage Regulator - Regulator, 6 volt, positive ground, saddle mount, 4 terminal. Replaces Delco cut outs 1116766 and 1116809 when used with conversion kit VRK1815. For tractor models Cub, Cub Lo-Boy, A, Super A, B, C, H, M. Replaces: 1118265, 1118305, 1118790, 1118786. (Item #: 105284, Ref: VR1813) $33.00

Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 and 1119575. Fits tractor models: 100, 130, 140, 200, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00

No
Picture
Wiring Harness - For Super A with Distributor Ignition. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. Replaces OEM# 45640DB. (Item #: 126785, Ref: R3717) $264.87

No
Picture
Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models Super A, Super AV, A1 all with magneto. (Item #: 182743, Ref: 350732R91) $120.00

Wiring Harness - Partial - For ignition switch and lighting switch power supplies on the following tractors: Super A, A-1, AV, AV1, C, Super C, 100, 130, 140, 200, 230 (Item #: 161964, Ref: 358109R92) $29.60

Engine Bearings

Main Bearings 0.030 - Main bearing set in 0.030. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240. Journal measures 2.095. YTO MBK113-030. Replaces 372116R91 and 7372116 (Item #: 106564) $75.01

Main Bearings .010 - Main bearing set in 0.010. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240. Journal measures 2.115. YTO MBK113-010. Replaces 376639R91 and 7376639. (Item #: 106562) $57.00

Main Bearings .020 - Main bearing set in 0.020. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, F12, F14, 100, 130, 140, 200, 230, 240. Journal measures 2.105. YTO MBK113-020. Replaces 376642R91 and 7376642. (Item #: 106563) $86.75

Rod bearings - Rod bearing in .030. For C113 and C123 Gas engines. Journal Measure 1.720 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-030, 356305R1, and 7356305. Sold individually. (Item #: 106448) $16.40

Rod Bearings - Rod bearing in .002. For C113 and C123 Gas engines. Journal Measure 1.748 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-002, 360218R11, and 7356306. Sold individually. (Item #: 106445) $14.90

Rod Bearings - Rod bearing in .020. For C113 and C123 Gas engines. Journal Measure 1.730 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-020, 376638R11, and 7376638. Sold individually. (Item #: 106447) $5.80

Rod Bearings - Rod bearing in standard. For C113 and C123 Gas engines. Standard Journal Measure 1.750 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-STD, 356304R11, and 7356304. Sold individually. (Item #: 106444) $12.40

Rod Bearings, .010 - Rod bearing in .010. For C113 and C123 Gas engines. Journal Measure 1.740 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-010, 376636R11, and 7376636. Sold individually. (Item #: 106446) $13.30

No
Picture
Rod Bearing Set, 4 Cylinder, Standard - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C113 (gas), C123, C123 (gas), Standard Journal Measure 1.750 inches, (Item #: 183958) $46.00

Engine Gaskets

Complete Gasket Set with Seals - Overhaul gasket set For tractor models 130, 140, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, (U-2, U-2A up to serial number 22113), (330, 340, 404 with C135). Replaces FS3150. (Item #: 106715, Ref: OGS113) $69.00

Crank Seal, Front - For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 swrial number <22113, U-2A serial number <22113. (Item #: 172671, Ref: 389407R92) $11.60

No
Picture
Crank Seal, Rear - Fits, 100, 130, 140, 200, 22, 230, 330 serial number <100500, 340 serial number <100500, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 serial number <22113, U-2A serial number <22113. (Item #: 106651, Ref: 24425D) $19.20

Front Crankshaft Seal - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C60 (Gas and LP), C113 (Gas and LP), C123 (Gas and LP), C135 (Gas and LP), C146 (Gas and LP), C153 (Gas and LP), Replaces International OEM number 379620R92, 378193R91, 350708R1, 355769R1, 46179DC, (Item #: 106638) $14.60

No
Picture
Full Gasket Set - For A, Super A, B, C, Super C, F-14, 100, 130, 140, 230, 240 with Water Pump Gasket (Item #: 106716, Ref: FS3150) $97.00

Gasket, Manifold, Pack of 2 - Used with 251175R1 Manifold. Fits Models: A, B, C, Super C, Super AV, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 240, 330, 340, 404, 424, 444, A1, T4B, AI, All with 113, 123, 135, 146 and 153 CID Gas, LP or Distallate engines. Price is for two. Replaces 24520D, 24520DA, 352014R1, 48696D, 48696DA (Item #: 101551, Ref: 352014R1) $12.00

Gasket Set Upper - For early engines without a water pump. For C113 Gas engine in models: A, AV, B, BN, C, Super A, Super AV Only Fits 9 Stud Cylinder Head, not the 14 Stud. (Item #: 106676, Ref: 354474R95) $34.00

Head Gasket - Head gasket for 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super AV - all with C113 engine. (Item #: 168314, Ref: 366301R11) $35.40

Head Gasket - For International / Farmall tractor models C, Super A (Farmall, 1/47-12/53), Super A (V, Farmall, 1/47-12/53), Super A (1, Farmall, 1/54-12/55), Super A (V1, Farmall, 1/54-12/55), Super C (Farmall, 1/51-12/53), 100, 130, 140, 200, 230, 240, 330, 340, Compatible with International Construction and industrial models T340, TC5, 500, Compatible with International Engine (s) C113 (with water pump conversion), C123, C135 (s/n 100500-earlier), Compatible with International Hay Cutting (s) 201, Replaces International OEM number 356313R1, 366300R3, 366300R2, This head gasket is used on applications with a water pump, For 9 Stud Cylinder Head, For Applications Without Water Pump use Item #: 168314, (Item #: 160771, Ref: 356313R2) $40.50

Head Gasket Kit - Upper gasket set with head gasket. For C123 CID gas 4 cylinder engine on tractors: Super A-1 and AV-1 serial number 310300 and up, Super C~ 100 and 200. For 400, 450, M, MD, MDV, MV, Super M, Super MD, Super MTA, Super W6, Super WD6, W400, W450, W6TA. (Item #: 106677, Ref: 357476R95) $76.00

Liner Sealing Ring - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C123, Replaces International OEM number 24434D, Sleeve OD: 3.30", (Item #: 128621) $5.20

No
Picture
Manifold Gasket - For International / Farmall tractor models B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 500, Replaces International OEM number 352014R4, (Item #: 167139) $7.30

Manifold Gasket Set - For International / Farmall tractor models A, B, C, Super A, Super C, 100, (Item #: 101543) $7.80

Oil Pan Gasket - For 140, 130, 100, 140, 300, 22, 230, 240, 330, 340, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, SUPVER AV, Super C, - ALL WITH C113 OR C123 ENGINES. (Item #: 106698, Ref: 43458DB) $8.10

Oil Seal - Fits: [A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240 (use as a flat belt pulley shaft seal)], [H, HV, Super H, Super HV (use as a transmission counter shaft front seal)], [O4, W4 (Used as a brake shaft oil seal)]; The seal measures 1.375 inches inside diameter, 2.110 inches outside diameter, 0.315 inches wide. Replaces: 356502R91, 356503R91, 358781R91, 358820R91, 367810R91, 369146R91, 43308D, 43660D, 48308D, 48954D, 71700C1, 71701C1. (Item #: 152182, Ref: 71701C1) $5.10

Rear Crankshaft Seal Kit - Fits tractor models A, AV, B, BN, C, F12, F14, I12, I14, O12, O14, W12, W14 (2-piece rear felt seal ONLY fits as a rear crankshaft seal), Super A, Super A-1, Super AV, Super AV-1, Super C 340 (gas, up to engine serial number 100500), 100, 130, 140, 200, 230, 240, 330. Replacement part number and kit contents: (2) 24425D, 24425DA felt seals, (2) 43447D, 43447DA seal retainer center gaskets, (1) 43448D seal retainer to block gasket, (4) 43445D seal plate felt plugs, and (4) 43446D, 43446DA seal retainer plate gaskets. (Item #: 182488, Ref: IHS2416) $21.40

Timing Cover Gasket Set - This Timing Cover Gasket Set contains: Governor housing gasket, Water pump plate gasket, Fan bracket gasket, Timing cover gasket, Front crankshaft seal with seal saver and Lower water outlet gasket. Use on C113, C123, C135, C146, and C153 Gas or LP engines. Fits A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 330, 3514, 404, 424, 444, 504. Replaces OEM part numbers: 45875D, 375745R1, 375745R2, 43294D, 43294DA, 46179D, 46179DC, 43442D, 49177D, 378193R91, 46871D, 68104C1, 68104C2. (Item #: 182535, Ref: 46179DKit) $32.00

Valve Cover Gasket - This Valve Cover Gasket is used on Gas Engines; C113, C123, C135, C146, C153. It replaces OEM/Original part numbers 43378DB, 43378DD, 43378DE. (Item #: 128613, Ref: 43378DE) $10.40

Valve Seals - Valve Guide Seal - Positive Type (Item #: 183858, Ref: 386192R1) $3.30

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings with Flat Head Pistons - Basic Engine Kit, Less Bearings, for A and AV, B and BN, Super A and AV to serial number 310299, C. Cylinder sleeves are 3-5/16 (3.3125) inches O.D. at the seal. (C113 CID 4-cylinder Gas). For tractors with flat head standard compression pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3 inch to 3-1/8 inch), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 131096, Ref: BEKH1150-LCB) $390.00

Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons - Basic Engine Kit, Less Bearings for A and AV, B and BN, Super A and AV to serial number 310299 (C113 CID 4-cylinder Gas). For tractors with stepped head high compression pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3 inch to 3-1/8 inch), pins and retainers, complete gasket set with crankshaft seals. Sleeves are 3-5/16 inch outside diameter at the seal. For engines without factory water pump. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130577, Ref: BEKH1154-LCB) $444.00

Basic In-Frame Engine Kit, with Flat Head Pistons - For A and AV, B and BN, Super A and AV to serial number 310299, and C. Kit contains complete sleeve and piston kit with rings, pins and retainers (overbore 3 inch to 3-1/8 inch, block seal land ID 3.311 inches), upper gasket set (with head gasket) and pan gasket. (Item #: 184556, Ref: BIFH1150) $334.00

Basic In-Frame Engine Kit, with Stepped Head Pistons - For A and AV, B and BN, Super A and AV to serial number 310299 and C. (C113 CID 4-cylinder Gas). For tractors with stepped head high compression pistons. Kit contains complete sleeve and piston kit with rings (overbore from 3 inches to 3-1/8 inches, block seal land ID 3.311 inches), pins and retainers, upper gasket set (with head gasket), and pan gasket. (Item #: 184554, Ref: BIFH1154) $344.00

Engine Overhaul Kit, Comprehensive, Less Bearings with Flat Head Pistons - Overhaul kit, less bearings. For A and AV, B and BN, Super A and AV to serial number 255417 (C113 CID 4-cylinder gas). For tractors with flat head standard compression pistons. Kit contains sleeves and sleeve seals, flat head pistons and piston rings (overbore from 3 inch to 3-1/8 inch), pins and retainers. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. Valve length is 4-25/32 inch. (Item #: 187185, Ref: EOK1150-LCB) $849.00

Engine Overhaul Kit, Comprehensive - Less Bearings - with Stepped Head Pistons - Overhaul kit for A and AV, B and BN, Super A and AV to serial number 255417 (C113 CID 4-cylinder gas). For tractors with stepped head high compression pistons. Contains sleeve and piston kit (sleeves, pistons and rings, pins and retainers, overbore from 3 inch to 3-1/8 inch). Complete gasket set. Valve parts: (intake and exhaust valves, springs, guides and keys). IMPORTANT: specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: 186985, Ref: EOK1154-LCB) $745.18

Engine Rebuild Kit - Less Bearings - 3.25" Overbore, C113, C123 - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113 (Gas), C123 (Gas), 3.25" overbore, Flat Top Pistons, Lower Sleeve O.D. 3.43", Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106564, (Item #: 131097) $444.00

Engine Rebuild Kit - Less Bearings - 3.437" Liner Seal I.D., C113 - For International / Farmall tractor models A (with block 354898R1-R4), B (with block 354898R1-R4), C (with block 354898R1-R4), Super A (s/n 310300-356000), Compatible with International Engine (s) C113 (gas), Bore: 3.125", 3.437" liner seal land inside diameter, Engines without water pump conversion, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106564, (Item #: 130579) $465.00

No
Picture
Engine Rebuild Kit - Less Bearings - 3.437" Liner Seal I.D., C123 - For International / Farmall tractor models C (s/n 48000-48499), Super A (s/n 356001-later), Super C, 100, 200, Compatible with International Engine (s) C123 (gas), Bore: 3.125", Stroke: 4.000", Engines with water pump, 3.437" liner seal land inside diameter, Dome top pistons, Also works with C113 engine with water pump conversion, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For flat top pistons use Item #: 106564, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130578) $453.00

Valve Overhaul Kit - C113 4-cyl Gas - Fits A, AV, B, BN, Super A, AV to serial number 255417 valve length 4-25/32 inch, (4 cylinder Gas/C113). Kit includes valves, valve springs (for non-roto exhaust valve), valve keys, and valve guides. Replaces exhaust valves marked 42025DA and intake valves marked 42024D. (Item #: 172565, Ref: VOKH113) $191.00

Valve Overhaul Kit - C113 and C123 Gas - Fits Super A, AV serial number 255418 to serial number 310299, C and Super AI, AV1 serial number 310300 and up, Super C, 100 and 200. Valve Length 4-57/64 inch, (Gas 4 cylinder, C113, C123 CID). Replaces exhaust valves marked 57798D and intake valves marked 57797D. Kit includes valves, valve springs (for non-roto exhaust valve), valve keys, valve guides. (Item #: 183984, Ref: VOKH123) $140.00

Valve Train Kit - For 113 CID Gas Engine (valve length 4.83 inch). Models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super AV, U-2 serial number <22113, U-2A serial number <22113. Kit includes 4 intake valves, 4 exhaust valves, 8 valve springs, 8 valve guides, 16 valve keys. (Item #: 172565, Ref: VTK113) $191.00

Engine Parts

Camshaft Timing Gear - 66 teeth. For tractor models (100, 130, 140, 200, 230, 240, Super C all with 123 CID engine), (330, 340, 404 all with 135 CID engine), (424 with 146 CID engine), (444, 504 with 153 CID), (A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1 with 113 CID engine). Replaces 375712R1, 6779DB. (Item #: 111038, Ref: 375712R1) $92.00

Crankshaft Gear, Used - For International tractor models A, B, C, Super A, Super C, 200, 230, 240, 330, 340, 404, 424, 504, 2404, 2424, 2504, Compatible with International Engine(s) C123, C135, C146, C153, Compatible with International Hay Cutting(s) 201, Replaces International OEM nos 46870DA, Replaces Casting nos 46879DA, 33 Teeth, Inside Diameter: 1.25", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497149) $89.01

Crankshaft Pulley - Crankshaft Pulley For A, B, C, Super A, Super C, 100, 130, 200, 230. Press fit. Not drilled/tapped for setscrew, (early tractors used a setscrew to retain pulley to crankshaft, customer would have to drill and tap this pulley). This pulley is balanced and has timing marks. Replaces: 251589R91, 6502DB, 6502DC, 6502DX (Item #: 100791, Ref: 6502DC) $72.00

Crankshaft Timing Gear - 33 teeth, used in C113, C123, C135, C146, and C153 Engines. For tractor models A, Super A, AV, Super AV, B, BN, C, Super C, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504. (Item #: 121687, Ref: 46870DA) $65.00

No
Picture
Cylinder Head, Remanufactured, 6716DA - For International / Farmall tractor models A, B, Super A (gas), Replaces International Casting number 6716DA, Engines 113, 123, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205486) $650.01

No
Picture
Cylinder Head, Remanufactured, 9052DA - For International / Farmall tractor models A (Gas), B, Super A, Replaces International Casting number 9052DA, Engines 113, 123, Cylinders 4, Casting No. 9052DA, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200186) $550.01

Cylinder Head, Used - For International tractor models A (Gas), B, Super A, Replaces International Casting number 6716DA, Engine(s): 113, 123, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205486, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405486) $321.01

Cylinder Kit - For International / Farmall tractor models A, B, C, F12, F14, Super A, W12, 130, 140, 230, 240, Replaces International OEM number 366289R91, (Item #: 168657) $94.00

Governor Arm, Rockshaft - For tractor models (200, 230, 240 serial number up to 65000 with C123 engine), A, A1, AV1, B, C, Super A, Super AV, Super C. (Item #: 105380, Ref: 6507DA) $39.10

Governor Assembly - For A, Super A, B, C, Super C, 100, 130, 140, 200, 240, 330, 340, 404. OEM number 375778R11, 374710R1, 356746R91, 356745R91. Does NOT include housing. (Item #: 105375, Ref: R0612) $167.00

Governor Spring - This Governor Spring is used internally in the following tractors: A, AV, B, BN, Super A, Super A1, Super AV, Super AV1, 100, 130, 2404 (With C-113, C-123 or C-135 engines), 404. It replaces: 46944DA (Item #: 179295, Ref: 46944DA) $12.50

No
Picture
Governor Thrust Bearing Assembly - This 3 piece bearing assembly slides onto the governor assembly. For models cub, A, B, C, Super C, 560, Super AV, 184, AV, Bn, Cub Lo-Boy, Super A, 100, 130, 140, 154, 185, 200, 230, 240, 330, 340, 404, 424, 444, 460, 504. Also replaces 55314D. (Item #: 184444, Ref: 43481D) $52.00

Hand Starting Crank - For Super A, Super C, 100, 130, 200, ALL WITH C123 ENGINE. Hand Starting Crank with Spinner. Measures 16 3/4 inches to the first bend on the longest straight section. (Item #: 122096, Ref: 357750R11) $69.00

Hand Starting Crank, with Spinner - For tractor models (A, B, C, Super A, ALL WITH THE C113 ENGINE), (200, 230, 340, 404, 504 all with tricycle front). Starting Hand Crank with Spinner. Measures 13 1/2 inches to the first bend Longest Straight Section. (Item #: 122095, Ref: 53385DBX) $69.00

Pushrod - Fits A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, U2, U2A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (all with C113, C123, C135, C146, C153 gas/LP engines) 10.762 inch length, 0.310 inch tube diameter . Replaces: 360213R91, 357548R1, 47386D, 47385D. (Item #: 182498, Ref: 47385D) $43.00

No
Picture
Push Rod, Used - For International tractor models A, B, BN, C, Super A, Super AV, Super C, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine(s) C123, C135, C146, C153, Compatible with International Hay Cutting(s) 201, Replaces International OEM number 357548R1, For a new version of this item use Item #: 182498, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463344) $24.01

Ring Gear,Flywheel - For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 240. Gear has 90 teeth, 10.495 inch inside diameter and 11.435 inch outside diameter, .50 inches wide. (Item #: 103906, Ref: 55755DB) $32.50

No
Picture
Valve, Exhaust - For tractor models A, AV, B, BN, Super A, Super AV, to serial number 255417. (flat head compression piston) (cylinder sleeve 3-5/16 inch outside diameter at seal) (valve length 4-25/32 inch). SOLD by the EACH. (Item #: 128739, Ref: 42025DA) $20.10

Valve, Exhaust - For Models: A, AV, Super A and Super AV serial number 255418 to serial number 310299, and C. (flat head compression piston) (cylinder sleeve 3-5/16 inch outside diameter at seal) (1.160 inch head diameter, 4.940 inch length, 45 degree). Sold single. (Item #: 128524, Ref: 57798D) $13.40

Valve Guide - Valve guide for tractor models 100, 130, 140, 200, 22, 230, 240, (330, 340 serial number 100500 and before), 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super AV, Super C, (U2, U2A serial number less than 22113). Price shown is for each, sold only in multiples of 8 items. (Item #: 128646, Ref: 356583R21) $4.60

Valve, Intake - Intake valves for Models: A, AV, B, BN, Super A, Super AV, to serial number 255417. (cylinder sleeve 3-5/16 inch outside diameter at seal) (valve length 4-25/32 inch). Price shown is for each. (Item #: 128522, Ref: 42024D) $12.90

Valve, Intake - For tractor models: A, AV, Super A and Super AV serial number 255418 to serial number 310299, and C. (flat head compression piston) (cylinder sleeve 3-5/16 inch outside diameter at seal) (1.340 inch head diameter, 4.940 inch length, 45 degree). Sold single. (Item #: 128523, Ref: 57797D) $10.80

$Farmall Super A Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 100, 200, A, AV, B, BN, C, Super AV, Super C, Super A. Contains: springs, guides, locks, (no valves). (Item #: 131579, Ref: VSKH113) $191.00

Valve Spring - Used on valves with length of 5-5/16 inch. For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A serial number less than 22113), W4. 8 Used Per Tractor. Sold individually. (Item #: 128518, Ref: 24544DA) $3.30

Engine Pistons and Sleeves

Cylinder Kit - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 200, Compatible with International Engine (s) C113 (Gas, LPG), C123 (Gas, LPG), Replaces International OEM number 374493R93, 3.125" bore, Dome Top Piston, (Item #: 166745) $103.00

Pin Bushing - This Piston Wrist Pin Bushing Is used on 113 and 123 Gas and LP Engines. 0.909 inch I.D. 0.993 Inch O.D. 1.216 inch overall length. Pin Bushings require honing after installation. Replaces: 24415D, 64508D (Item #: 108092, Ref: 64508D) $10.00

Piston Sleeve - Fits 113 CID, 123 CID 4 cylinder gas engines with 3 1/8 inch bore (3 inch bore no longer available). 3.31 inches OD sleeve at seal. Models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super AV, Super AV serial number 255418-310299, U-2 serial number <22113, U-2A serial number <22113. Pricing is per liner. 3.31 inch outside diameter sleeve at seal. (Item #: 172546, Ref: SW52) $23.30

Sleeve and Piston - This sleeve and piston is for one cylinder and is stepped head piston. For Super A and Super AV to serial number 310299, A, AV, B, BN, C. For C113 Gas Engine. Contains: sleeve, stepped head piston and rings, pin and retainers. Overbore from 3 inch to 3-1/8 inch. 3-15/16 inch OD on the sleeve at the seal. Sold per piston. 4 used per engine. (Item #: 166570, Ref: PK154) $84.00

No
Picture
Sleeve and Piston Kit - This Sleeve and Piston Kit is 3 1/4 inch overbore, stepped piston, 3.436 (3 7/16) inch lower sleeve diameter. Includes: sleeves, pistons, rings, O-rings, pins, and clips. For Super A, Super C, 100, 200 with C123 Gas Engine. (Item #: 184516, Ref: R2398) $570.00

$Farmall Super A Sleeve and Piston Kit 3 1\8 Bore$
Sleeve and Piston Kit 3 1/8 Bore - This sleeve and piston kit is for 1 hole using a Flat Head Piston on 113 CID, 123 CID 4 cylinder gas engine models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super AV, Super AV serial number 255418-310299, U-2 serial number <22113, U-2A serial number <22113. (Item #: 184584, Ref: SK260) $132.00

$Farmall Super A Sleeve and Piston Kit 3 1\8 Bore$
Sleeve and Piston Kit 3 1/8 Bore - This sleeve and piston kit is for 1 hole using a Stepped Head Piston in 113 CID, 123 CID 4 cylinder gas engine models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super AV, Super AV serial number 255418-310299, U-2 serial number <22113, U-2A serial number <22113. (Item #: 166570, Ref: SK265) $84.00

Sleeve and Piston Kit, Flat Head Pistons - This sleeve and piston kit is for 1 engine (4 holes). For tractor models A and AV, B and BN, Super A and AV to serial number 310299, C, 130, 140, 230, 240. For C113 and C123 Gas engines. Contains (4) sleeves, (4) flat head pistons and rings, pins and retainers. Overbore from 3 inch to 3-1/8 inch. (Item #: 184099, Ref: PK150) $389.00

No
Picture
Sleeve Seal Rings - Sleeve seal o-ring kit for 1 cylinder on 113 or 123 CID Gas engines with a 3 5/16 inch diameter at the seal for models: A, AV, AV1, B, BN, C, Super A, Super AV, 130, 140, 230, 240. Replaces 367799R1, 354881R1, 367799R1 (Item #: 173279, Ref: SRK713) $5.50

Engine Rings

Piston Ring Set - Ring set for 4 pistons, for C123 CID gas 4 cylinder engine. Overbore 3-1/8 inch to 3-1/4 inch. Contains (for each Piston): 3 compression rings at 3/32 and oil ring at 3/16 per cylinder. For tractors: Super A-1 AV-1 serial number 310300 and up. Super C~ 100 and for H, HV, O4, OS4, W4. Replaces 31R500, 2C4215, RP191451 (Item #: 185209, Ref: PRS159) $83.00

No
Picture
Piston Ring Set - 3-1/8 inch bore, 8 compression rings at 3/32 inch, 4 oil rings at 1/4 inch. For tractor models 100, 130, 140, 200, 230, 240, Super C, (Super A, Super AV serial number 310300 and up). All with C123 gas engine. And for tractor models A, B, C, 130, 140, all with C113 CID with 3 1/8 inch overbore. (Item #: 130029, Ref: 2C7696) $130.00

No
Picture
Piston Ring Set - For Super A with 3 1/8 bore, 3 compression at 3/32 and oil at 3/16. (Item #: 174389, Ref: 2C7799) $119.00

Piston Ring Set - 3.125" Bore - Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113 (gas), C123 (gas), Bore: 3.125", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome Compression, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 3.125" Bore - 4 Cylinder use Item #: 174389, (Item #: 120878) $32.80

No
Picture
Piston Ring Set, 3-1/8 - Ring set for 4 pistons, for C113 CID gas 4 cylinder engine. Overbore 3 to 3-1/8 inch, cylinder sleeve 3-5/16 inch outside diameter. Contains 3 compression rings at 1/8 inch and oil ring at 1/4 inch per cylinder. For tractors: Super A and AV serial number 255418 to serial number 310299 and C. For 2806, 2826, 2856, 806, 826, 856. If used in replacing piston rings for a Tisco Engine Kit sold after 11/15/08, use part number PRS154. (Item #: 185124, Ref: PRS150) $192.00

No
Picture
Piston Ring Set, 3-1/8 - Ring set for 4 pistons. For C113 CID gas 4 cylinder engine. Overbore 3 to 3-1/8 inch, cylinder sleeve 3-5/16 inch outside diameter. Contains 2 compression at 3/32, 1 oil at 3/16 per cylinder. For tractors: A and AV, B and BN and Super A and AV to serial number 255417. (Item #: 174369, Ref: PRS154) $76.00

Piston Ring Set - 3.1875" Bore - 4 Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 (all gas), Compatible with International Engine (s) C113 (gas), C123 (gas), Bore: 3.1875", Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 128884) $114.00

Piston Ring Set - 3.1875" Bore - 4 Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 (all gas), Compatible with International Engine (s) C113 (gas), C123 (gas), Bore: 3.1875", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 129082) $219.00

Piston Ring Set - 3.25" Overbore - Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C123, Overbore: 3.250", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .094", 4th Groove Size: .250", Sold per cylinder, (Item #: 120904) $23.00

Piston Ring Set Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Compatible with Massey Harris tractor models 20, 1 Cylinder Set, Bore:3.00", Rings:3 of .125 1 of .250", For 4 Cylinder Piston Ring Set use Item #: 178142, (Item #: 120876) $41.90

No
Picture
Piston Ring Set, Standard 3 Inch Bore - Ring set for 4 pistons, for C113 CID gas 4 cylinder engine. Original 3 inch bore. Contains 3 compression rings at 1/8 and oil ring at 1/4 inch per cylinder. For tractors: A, B, Super A and AV serial number 255418 to serial number 310299 and C. For 2806, 2826, 2856, 806, 826, 856. (Item #: 184943, Ref: 1486596) $151.00

Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, Compatible with International Engine (s) C113, C123, Bore: 3.125", Ring Size: Standard, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, (Item #: 120877) $19.20

Piston Ring Set - Standard - Single Cylinder Set - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240 (all gas), Compatible with International Engine (s) C113, C123, Bore Size: 3.125", Compression Rings per Piston: (3) - .125", Oil Rings per Piston: (1) - .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Toesional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Standard - Four Cylinder Piston Ring Set use Item #: 179775, (Item #: 129073) $32.40

No
Picture
Sleeve and Piston Kit - For International / Farmall tractor models A, B, C, Super A, 130, 140, 230, 240, Compatible with International Engine (s) C123 (LP and Gas), Replaces International OEM number 374338R93, Kit contains: (4) sleeves, (4) stepped head pistons and all rings, pins and retainers, Overbore from 3" to 3-1/8", (Item #: 185418) $342.00

Exhaust System

Exhaust Stack - 2" x 12", Straight Black - For International / Farmall tractor models A, B, C, Super A, Super C, Style: Straight, ID: 2", Length: 12", Color: Black, (Item #: 109504) $14.30

Exhaust Stack, Chrome, Curved - Double wall. Length 27 inches. For tractor models A, Super A, B, BN, C, Super C, 100, 130, 200, 230, 240, 340. Double wall, lined, 2 inch inlet I.D., 3 inch O.D., 24 inches tall plus 3 inch base. (Item #: 124222, Ref: R4449) $230.00

Exhaust Stack, Chrome, Straight - Double wall. Length 27 inches. Attaches with a standard exhaust pipe clamp, not included. For tractor models A, Super A, B, BN, C, Super C, 100, 130, 200, 230, 240, 340. (Item #: 124223, Ref: R4448) $210.01

Manifold Exhaust Pipe - 2" x 16" - For International / Farmall tractor models A, B, C, Super A, Super C, 2" x 16", (Item #: 110438) $26.60

Manifold Exhaust Pipe - 2" x 18" - For International / Farmall tractor models A, B, C, Super A, Super C, 2" x 18", (Item #: 111853) $26.60

$Farmall Super A Manifold, Intake\Exhaust$
Manifold, Intake/Exhaust - For tractor models A, B, C, Super A, Super C, 240, with C113 or C123 gas engines. Intake and exhaust. Replaces OEM# 251175R11, 251175R21. Gasket set available as part number 352014R1. Manifold Pipe available as R0056P. Please specify in comments if needed. (Item #: 101542, Ref: 251175R1) $90.00

Manifold Pipe - This manifold pipe screws into manifold numbers R0935 and 251175R1. Inside diameter is 1 1/2 inch, outside diameter 1 15/16 inch. Length between 6 and 8 inches. For tractor models 130, 140, 20, 230, 240, 330, 340, 404, 2404, 424, 2424, 444, 2444, A, B, C, Super A, Super C, 240. Replaces: 47701DB. (Item #: 101544, Ref: R0056P) $11.00

Muffler - Vertical muffler for gas tractors. Inlet inside diameter 1-15/16 inch, outlet outside diameter 2 inch, length 29 inch, diameter 4-1/4 inch round body. Fits engines C113, C123, C135. For tractor models: A, AV, Super A, Super AV, B, BN, C, Super A-1, Super AV-1, 330, Super C, 100, 13 For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 133340, Ref: 360720R91) $46.10

Muffler - Vertical muffler for gas tractors. Fits short clearance muffler for tobacco or grove application, engines: C113, C123, C135. Inlet inside diameter 1-15/16 inch, outlet inside diameter 2 inches, length 18 inches, diameter 4-1/4 inches, round body. For tractor models A, AV, Super A and AV, B and BN, C, Super For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 178978, Ref: 360720TOB) $88.00

Muffler Clamp - Muffler clamp. For 100, 130, 140, 200, 230, 240, 340, 404, 424, 460, 504, 560, 606, 656, 660, 664, A, B, C, Super AV, Super C, Super A bad part (Item #: 180044, Ref: 48889DA) $13.70

Muffler - Restoration Quality - For International / Farmall tractor models 140, 240, 330, 340, 404, 424, 444, 504 Also fits Farmall: A, B, C, Super A, Super C, 100, 130, 200 and 230 if a larger diameter outlet is desired., Compatible with International Construction and industrial models T340, Compatible with International Hay Cutting (s) 201, Replaces International OEM number 360720R91, 381665R92, 403825R1, High Temperature Paint, Restoration Quality Muffler, IH Logo and part number are stamped into the side of the muffler, Inlet Length: 2-1/4", Inlet ID: 1-61/64", Shell Length: 16-1/2", Shell Diameter: 4-1/4", Outlet Length: 10", Outlet OD: 1-25/32", Overall Length: 28-3/4", (Item #: 164534) $63.00

Muffler - Restoration Quality - For International / Farmall tractor models 140, 240, 330, 340, 404, 424, 444, 504 Also fits Farmall: A, B, C, Super A, Super C, 100, 130, 200 and 230 if a larger diameter outlet is desired., Compatible with International Construction and industrial models T340, Compatible with International Hay Cutting (s) 201, Replaces International OEM number 360720R91, 381665R92, 403825R1, Polished Stainless Steel, Restoration Quality muffler, IH Logo and part number are stamped into the side of the muffler, Inlet Length: 2-1/4", Inlet ID: 1-61/64", Shell Length: 16-1/2", Shell Diameter: 4-1/4', Outlet Length: 10", Outlet OD: 1-25/32", Overall Length: 28-3/4", (Item #: 164535) $150.00

Stainless Steel Rain Cap - Stainless steel rain cap. OEM 126114C1 (Item #: 186343) $41.70

Vertical Muffler - This stainless steel vertical muffler fits the following tractors models: A, AV, B, BN, C, Super A, Super C, 100, 130, 200, and 230. It also replaces the OEM part number 360720R91. The inlet length is 2 1/4 inches and the inlet inside diameter is 2 inches. The outlet length is 10 inches and the outlet outside diameter is 1 3/8 inches. The shell length is 16 1/2 inches and shell diameter is 4 1/4 inches. (Item #: 164533, Ref: 48832DB) $146.00

Fuel System / Air Intake

Air Cleaner Cap - This Air Cleaner Cap is used with either Donaldson or United Specialties air cleaners found on some of the following tractors C, Super A, Super A-1, Super C, 100, 130, 140, 200, 230, 240, 340. Used with vertical air intake through hood. Fits outside of the pipe. 1.75 Inch Inside Diameter, 4.25 Inch Body Outside Diameter. Replaces: 351189R91, 351190R91, 361723R91 (Item #: 111657, Ref: 351189R91) $40.00

Air Cleaner Cap - For tractor models: Super A from serial number 356001, C, Super C, 100, 130, 140, 200, 230, 240, 330, 340. Air cleaner cap 1 5/8 inch outside diameter. (Item #: 111662, Ref: 361723R91) $40.00

Air Cleaner Cap, Slides INTO Pipe - 3.06 inch body diameter, internal fit 1 1/4 inch outside diameter. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to serial number 355669. This cap slides INTO the pipe. Replaces: 350750R91. (Item #: 111661, Ref: R4744) $40.00

Air Cleaner Cap, Slides OVER pipe - 4 1/8 inch body diameter, external fit 1 3/8 inch inside diameter. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to serial number 355669. This cap slides OVER the pipe. (Item #: 109878, Ref: 350750R91) $44.30

Air Cleaner Oil Cup - For International / Farmall tractor models A, B, Super A (s/n 355669-earlier) Replaces International OEM number 52871D, , Compatible with Oliver tractor models Super 66, 60, 66 (all gas), Replaces Oliver OEM number H6054, 1H6054, 4-7/16" O.D. at lip, 4-1/16" I.D., (Item #: 112079) $15.00

Carburetor - This Carburetor may come with a gold, pewter or black finish. For C113 gas engine. Replacement for Marvel-Schebler TSX156, TSX157, TSX319, no longer supplied by OEM. Can replace carburetors: 52499DB, 69401D, 352376R92, 354184R93M, 355485R91, 373957R91, 10514A, 9748, 9749, 9752, 10514. The mounting studs measure 2-3/8 inch center to center. Service with BK27 or BK27V basic repair kit or C547 complete For A, B, Super A. (Item #: 126820, Ref: TSX157) $246.50

Carburetor - Zenith carburetor outperforms the original carbs used on: A, Super A, Super C, AV, B, 100, 130, 140, 200, 230, 240. New Zenith replaces Marvel TSX157, Carter UT7335. Center-to-center on the two mounting bolt 2 3/8 inches. Unlike many of the new Zenith replacements, the linkage is NOT reversible. The 14007 carburetor also replaces the following carburetors in some applications, 10386, 10522, 11115, 11188, 11340, 11704, 12115, 12122, 12285, 12613, 14007, 251182R92, 352047R91, 352377R92, 354184R93, 354185R92, 354892R93, 355485R91, 355485R92, 356901R91, 356902R92, 362384R91, 362385R91, 362984R91, 366306R9, 366306R91, 366306R93, 366462R94, 372095R91, 372098R93, 373957R91, 373959R91, 373961R91, 373962R91, 373978R91, 375560R91, 377600R91, 385507R91, 385608R91, 48616D, 52499DA, 69401D, 8928, 9167, IHS905, R0222, and 17A61. Made in USA, 1 year warranty. (Item #: 104184, Ref: 14007) $360.00

Carburetor Choke Lever - This choke lever is used on carburetors with a splined choke shaft. Fits: Zenith carburetors 9748, 9749, 9750, 9752, 10112, 10386A, 10386B, 10386C, 10441, 10441A, 10498, 10514, 10514A, 10522, 10522A, 10652. Marvel Schebler carburetors TSX156, TSX157, TSX171, TSX198, TSX319, TSX333, TSX347, TSX348. International / Farmall carburetors 352376R92, 354184R93, 355485R91, 373957R91, 52499DB, 69401D Replaces original part number 8639D. (Item #: 126958, Ref: 8639D) $19.20

Carburetor Elbow and Strainer - For tractor models A, AV, B, BN, C, Super A, Super C, 130, 140, 2404, 2424, 2444, 2504, 3514, 404, 424, 444, 504 and various International Windrower and Combine models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. Replaces OEM number 69938D. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Elbow and Strainer - This Carburetor Elbow with strainer assembly is for 1/4 inch O.D. fuel line. 1/8 inch male threads. The screen is 3/4 inch long. The pipe measures 1/8 inch by 1/4 inch compression. Used on Carter, Marvel Schebler and Zenith carbs using 1/4 inch O.D. fuel line. Verify measurements before ordering. Most Farmall / IH models are equipped with 5/16 inch O.D. line and require part number 9N9553. For tractor models A, B, C, Super C, Cub Lo-Boy 184, T340, T5, Super A, 100, 130, 140, Cub Lo-Boy 154, Cub Lo-Boy 185, 200, 230, 240, 330, 340, 404, 444, 504. (Item #: 113656, Ref: C150-17) $29.30

Carburetor Elbow with strainer assembly - This carburetor elbow with strainer assembly fits the models equipped with a 5/16 inch O.D. fuel line. 1/8 inch male threads. Fits Carter, Marvel Schebler and Zenith carburetors. Replaces 354827R91, 53796D, 67-528, 69938D (Item #: 113655, Ref: 354827R91) $34.00

Carburetor Float - Float Assembly. For tractor models 1050, 330, 404, A, B, Super A, All with Marvel Schebler small bowl carburetors. Replaces 69919D (Item #: 108449, Ref: 9N9550A) $9.60

Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following tractor models: 100, 130, 140, 200, 230, 240, 330, 340, 404, A, B, C, Cub, Lo-Boy 184, Super A, and Super C all using Zenith carburetor models: 11340, 11704, 11340, 11704, 12122, 12613, 12632, 12911, 12115, 12285, 12342, 12225, 8928, 9749, 9167, 9752, 11188, 10514, 10498, 10386, 10441, 13794, 13781, 10522, 11115, 11338, 11339, and 14007. (Item #: 108454, Ref: CTP28) $16.20

Carburetor Float - Fits Carter number UT27015, UT2223S, UT2418S, UT923S with Cast Iron Throttle Body, Carter number 21-121S. For tractor models 100, 130, 200, 230, 240, Super A, C, Super C, AV. (Item #: 122654, Ref: 354813R91) $36.70

Carburetor Float, Zenith - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Item #: 108454, Ref: CTP28) $16.20

Carburetor Fuel Needle - Main Jet Needle Assembly. For Zenith carburetors series 161 model numbers 9749, 10441, 10522, and 13876. For A, AV, B, BN, C, Super AV, Super C, Super A. (Item #: 108462, Ref: 71-28) $12.60

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch A, B, C, Super C, Super AV, Super AV-1, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, A1 with the following carburetors: TSX114, TSX156, TSX157, TSX159, TSX171, TSX198, TSX253, TSX319, TSX333, TSX338, TSX347, TSX348, TSX422, TSX44, TSX597, TSX635, TSX663, TSX696, TSX730, TSX744, TSX748, TSX827, TSX896, TSX896SL, TSX926, TSX930, TSX936, TSX94, TSX948, TSX949, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Kit - For International / Farmall tractor models B, Super A, For Zenith Carburetor number 10514A, Includes: Fuel and Air Adjusting Screws and Jets, when available, (Item #: 113807) $46.40

Carburetor Kit, Basic - Fits Marvel-Schebler carburetor TSX157 and International 69401D. For tractor models: A, B, Super A. For A, B, Super A (Item #: 112446, Ref: BK27V) $32.50

Carburetor Kit, Basic - Fits Zenith carburetor numbers: 9752, 10514A and International 52499d, and 352376R92. For tractor models: A, B, Super A, Av. For A, AV, B, Super A (Item #: 182741, Ref: BK9V) $46.10

Carburetor Kit, Basic - Kit for Zenith 11340, 11704, 11115, 11338, 11339 carbs on 100, 130, 200, 230, 240, C, Super A, Super C. (Item #: 100739, Ref: Z102) $35.10

Carburetor Kit, Basic - Kit for Zenith 11338, 11339, 12115, 12122, 12225, 12262, 12342, 12493, 12522, 12773, 12911, 13727, 13781, 13794, 13800, 13873, 13876, 13879, 13902 Includes Gaskets, Needle, and Seat. For tractor models 130, 140, 200, 230, 240, 404, Cub, Cub 184 Lo-Boy, Cub Lo-Boy, Super A. (Item #: 100740, Ref: Z103) $17.90

Carburetor Kit, Basic - Kit for Marvel TSX730, TSX744, TSX896, TSX857, TSX748, TSX896SL, TSX156, TSX157, TSX319 carbs used on 130, 140, 200, 230, 240, 2444, 2504, 3514, 404, 424, A, B, C, Super A. (Item #: 100733, Ref: MS101) $15.60

Carburetor Kit, Basic - Kit for Zenith 12613, 12632, 8928, 9749, 9167, 9752, 10386, 10441, 10514, 10522 carbs used on 130, 140, A, B, C, Super A, Super C. (Item #: 100738, Ref: Z101) $27.40

Carburetor Kit, Basic - This Carburetor Kit is used on UT2701S, UT2702S, UT2703S, UT2705S, UT2706S, UT2703 with Aluminum Throttle Body. Includes Gasket, Needle, Seat, and Throttle Shaft. (Item #: 184712, Ref: R6873) $31.70

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877, 14007, 13794, 13794B, and OEM 375560R91. (Item #: 183586, Ref: BK44V) $27.60

No
Picture
Carburetor Kit, Basic - For A, B, Super A, AV all with a Zenith 9752. Basic Carburetor Kit. (Item #: 182741, Ref: BK9V) $46.10

Carburetor Kit, Basic - For C, Super A, Super AV, Super C, all with original Carter Carburetors EXCEPT UT2703. Basic Kit includes Gaskets, Float Valve and Throttle Shaft. CCK01 (Item #: 111604, Ref: BK200V) $22.80

Carburetor Kit, Basic - For tractor models A, B, Super A, AV all with Zenith 1115 Carburetor. (Item #: 182772, Ref: BK9AV) $39.10

Carburetor Kit, Basic - For tractor models Super A, Super C with Zenith 11115, 11188, 11338, 11339, 11340, 11704. Basic Carburetor Kit. (Item #: 182777, Ref: BK9BV) $34.40

Carburetor Kit, BASIC - For A, B, Super A with Marvel TSX253, TSX663, TSX114, TSX597, TSX635, TSX696, TSX936, TSX338. (Item #: 173474, Ref: MSCK10) $21.48

Carburetor Kit - Carter all Aluminum - For International / Farmall tractor models Super A, Super C, Compatible with Massey Ferguson tractor models TO30, 35, 50, Compatible with Oliver tractor models Super 55, Super 66, Super 77, For Carter carburetor number (s): UT all aluminum, (Item #: 110703) $29.70

Carburetor Kit, Complete - Complete Carburetor Kit For Marvel-Schebler # TSX157. Kit contains all parts shown. For tractor models A, AV, B, BN and Super A. (Item #: 178507, Ref: R7876) $47.50

Carburetor Kit, Complete - For A, B, Super A with Marvel-Schebler TSX157. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Item #: 113809, Ref: C527V) $38.50

Carburetor Kit, Complete - For A, B, Super A with Marvel-Schebler TSX159 and TSX422 and IH # 69401D. Contains the following parts for a Major Overhaul with instructions: gaskets, needles, seats, shafts, springs, and mixture screw. (Item #: 113809, Ref: MSCK23) $38.50

Carburetor Kit, Comprehensive - Fits Zenith carburetor 9752 and International 52499D. For tractor models A, B, Super A, AV. (Item #: 118437, Ref: C509V) $39.10

Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For Marvel-Schebler # TSX157. Kit contains all parts shown. For tractor models A, AV, B, BN and Super A. (Item #: 184818, Ref: R7877) $63.00

Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler # TSX156. For Farmall tractor models A, B, BN, AV and Super A. The kit contains all the parts shown. (Item #: 131597, Ref: R7875) $63.00

No
Picture
Carburetor Kit, Comprehensive - For A, AV, B, Super A, all with Zenith Carb #10514A. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Item #: 172598, Ref: C509AV) $41.30

Carburetor Kit, Comprehensive - For Super A, Super C with Zenith 11115, IH part number 355485R91 . Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needle, seat, shaft, spring, and mixture screw. Does not include float. (Item #: 113808, Ref: ZCK11) $51.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 10514A, 9748, 9749, 9752, 10514, 352376R92, 48616DC. For the following tractor models: A, B, Super A. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203303, Ref: 1403-CARB) $455.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 10522, 11115, 11338, 11339, 11704, 14007. For the following tractor models: Super A, Super C, 100, 130, 140. Center-to-Center on the mounting bolts is 2 3/8 inches. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203305, Ref: 1408-CARB) $235.01

Carburetor Repair Kit - This Carburetor Kit is used on Carter Carburetors with Cast Iron throttle bodies O-653. Used on Farmall C, Super A (sn 255418 and up), Super C, 100, 130, 200, 230 (w/ #UT733S and UT734S w/ cast iron upper bodies); Replaces: 76769R1 Fits Carter Carburetors: UT27015, UT652, UT733S, UT734S, UT771A, UT771S, UT795S, UT925A, UT925S, Fits Carter Carburetors Cast Iron Throttle Body. (Item #: 111604, Ref: BK200V) $22.80

Choke Rod - For tractor models Super A, C, Super C, 100, 130. Choke Rod. Replaces 350744R1 (Item #: 126113, Ref: 50633R3) $26.90

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Item #: 108051, Ref: R3654) $25.40

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Item #: 107987, Ref: 23995DC-CHROME) $2.60

Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Item #: 121475, Ref: 12770D) $12.40

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Item #: 107951, Ref: 23995DA) $12.80

Fuel Line - Pipe, fuel strainer to carburetor with two nuts. For tractor models Super A and AV SN# 356001 and up, Super C, 100, 200. This fuel line is used when tractors are equipped with 5/16 inch fuel fittings. Verify before ordering. (Item #: 172869, Ref: 356355R11) $30.10

Fuel Line - For Super A and AV serial number 250001 to 355999, C. Fuel Line, metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. Replaces 350623R11, 356355R11. (Item #: 172869, Ref: 350623R11) $30.10

Fuel Line With fittings - Buna-N flex gas line. Buna -N gas lines easily flex, eliminates metal tubing, vibration. For 100, 130, 200, 230, A, B, C, Super C, Super A. Replaces 350623R1, 350623R11, 369993R11. (Item #: 112540, Ref: FLA15) $22.30

Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Precleaner Assembly - Complete, glass dust bowl assembly, 1-3/4 inch inside diameter base, just like the original. For tractor models Super A (serial number 356001 and up), Super A-1, C, Super C, 100, 130, 140, 200, 230, 240, 340. (Item #: 115805) $58.00

Precleaner Assembly - Complete, glass dust bowl assembly, 1-3/8 inch inside diameter base, just like the original. For tractor models A, Cub, B, Super A (to serial number 355669). (Item #: 115806, Ref: 356254R91) $61.00

Precleaner Bowl - Glass bowl for pre-cleaner assembly 335261R91, 356254R91. (Just like the original). Tractors: Super A (serial number 356001 and up), Super A-1, C, Super C, 100. 130, 140, 200, 230, 240, 340, A, Cub, B, Super A (up to serial number 355669). (Item #: 115866, Ref: 64178D) $9.00

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00

Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3/8 inch pipe inlet, 5/16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Item #: 113653, Ref: 17215DA) $70.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Item #: 105364, Ref: 49923D) $3.30

Sediment Bowl Screen - For International / Farmall tractor models A, B, C, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 240, 340, 454, 460, 464, 504, 574, 606, 656, 674, 686, 2400A, 2404, 2500A, 2504, 2606, 2656, Compatible with International Hay Cutting (s) 201, 210, 230, 275, 375, 4000, 5000, 5500, Replaces International OEM number 49923D, Diameter: 2", Diameter Hole: 1/4", For Sediment Bowl Assembly use Item #: 105370, (Item #: 105371) $3.40

Throttle Control Assembly - For tractor models Super A, 100, 130, 140. Throttle Control Assembly. Replaces IHS539. (Item #: 128089, Ref: 350610R11) $70.72

Throttle Lever - Lever Only For 350610R11 assembly. For tractor models Super A, 100, 130. Replaces 350612R2 (Item #: 185245, Ref: R4192) $22.90

Throttle Shaft - For International / Farmall tractor models Super A, Super C, 100, 130, 200, 230, Replaces International OEM number 354805R92, 354805R91, For Carter carburetor with cast top, (Item #: 122655) $23.00

No
Picture
Throttle Spring - For tractor models A, Super A, B, BN, 100, 130. (Item #: 180014, Ref: 43650D) $5.00

Gauges

Amp gauge - Gauge, ammeter has 20-0-20 range. Not Exactly like original. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Item #: 102133, Ref: 354473R91) $20.70

Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Item #: 102132, Ref: 360053R91) $21.50

Amp Gauge, Original Style - Gauge, ammeter has 20-0-20 range. Original Style. IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418, 354473R91 (Item #: 121652, Ref: 354473R91OE) $29.74

Oil Gauge - Oil pressure gauge, 80 pound, fits 2 inch diameter hole. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, W4, 400, W6, W9, A, B, C, H, M, Super C, Super W9, Super A. Replaces 536962R1, 536962R2. (Item #: 110411, Ref: FAD9273A) $14.50

Oil Gauge - For all IHC and Farmall tractors up to 1946. Oil Pressure Gauge with color read (no numbers on face). IHC logo on face. Screws directly into block. (Item #: 113563, Ref: 43987DB) $41.20

Oil Gauge, Engine Mount - For Cub, Cub Lo-Boy, Super A, AV C, Super C, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400. Oil Pressure Gauge, 0 to 75 psi. 2 inch IH logo on face. Does not come with bracket to mount in dash- screw in engine mount. Replaces: 364665R91, 393487R91, 528245R91, 536967R1 (Item #: 113562, Ref: 364665R91) $45.60

Oil Pressure Gauge - For International / Farmall tractor models B, C, H, M, Super A, Super C, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, Replaces International OEM number 43987DBH, 0-45 PSI, Includes Mounting Studs, (Item #: 102136) $18.30

Temperature Gauge - For International / Farmall tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, Replaces International OEM number 67135D, Lead Length: 4', For a temperature gauge with a 6' lead use 108050, For a temperature gauge with a 8' lead use 118328, (Item #: 108055) $37.90

Temperature Gauge - For International / Farmall tractor models B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, Replaces International OEM number 370259RH, Lead Length: 8', For a temperature gauge with a 4' lead use 108055, For a temperature gauge with a 6' lead use 108050, (Item #: 118328) $31.00

Temperature Gauge Bracket - For International / Farmall tractor models A, B, Super A, 100, 130, Replaces International OEM number 53620D, 50495D, (Item #: 121699) $30.00

Touch Control Temperature Gauge - For Super A, 100, 130, 140. Touch Control Temperature Gauge with Zone Style, "IH" Logo. Has right angle 45 inch lead. ***If not previously equipped with touch control gauge customer must also order part number 355844R91 strainer assembly from IH or salvage yard as it is tapped for gauge capillary line. Replaces: 356466R91, 356465R91, 355841R91, 355840R91. (Item #: 124419, Ref: 355840R91) $62.98

Touch Control Temperature Gauge - For tractor models Super A, Super AV, Super C, 100, 130, 140, 200. Touch Control Temperature Gauge with Zone Style, "IH" Logo. Replaces 356466R91, 356465R91, 355840R91. (Item #: 124419, Ref: 355841R91) $62.98

Water Temperature Gauge with IH Logo - TEMPERATURE GAUGE WITH 19 inch LEAD and IH Logo. FITS MODELS A, H, M, Super A, Super M, Super MTA (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Item #: 111254, Ref: 67135D) $38.00

Water Temp Gauge - 16 inch Lead - with IH Logo For A, Super A, B (From 1947). Replaces: 67135D (Item #: 111254, Ref: R4181) $38.00

Hitch / Drawbar

Leveling Screw, Fast Hitch - For tractor models 100, 130, 140, A1, Super A. (Item #: 172672, Ref: 69831C1) $85.00

Lift Yoke - 9.380 inch overall length, 7/8 inch-9 UNC right hand thread. For tractor models 100, 130, 140, A1, Super A. (Item #: 172482, Ref: 520067R1) $76.20

Hydraulic System

Hydraulic Pump - For tractor models A, AV, Super A, Super AV, Super C, C, 100, 130, 140, 200, 230. Also Replaces OEM number 360689R91, 360689R92 360945R92 and 360945R91. (Item #: 104229, Ref: 384506R94) $560.00

Hydraulic Pump Gear - This New Hydraulic Pump Gear has 16 teeth. It Fits: C, Super A, Super A-1, Super AV-1, Super C, T340 (gas with 9 GPM side engine mounted pump), [ T4, T5 (gas with 9 GPM side engine mounted pump) ], 100, 130, 140, 200, 230, 240, [ 2424, 2444, 340, 424, 444 (GAS) ], 330, 404, Crawler: 500 (GAS with 9 GPM side engine mounted pump). Replaces: 350709R1. (Item #: 121576, Ref: 350709R1) $101.00

Hydraulic Pump Kit - This is a Thompson Hydraulic Pump Gasket, O-Ring and Seal Kit used on Thompson 360945R91 and 360945R92 hydraulic pumps. Used on 100, 130, 140, 200, 230, C, Super A, Super A1, Super AV, Super AV1, Super C. Contains Gasket 350708R2 (350708R1), Gasket 350706R3, Oil seal 385038R91 (353183R91), Main body O-ring 510185 (293726R1), O-ring 352024R2, 2 O-rings 75285739 (350667R1), Woodruff key 126-109 (106749), Jam nut 124925 (114494). Replaces 360957R91 (Item #: 184756, Ref: 360957R91) $59.00

Hydraulic Pump Kit - This is a Pesco Hydraulic Pump Gasket, O-Ring and Seal Kit used on Pesco Pumps: 360689R91, 350707R96, 355007R91, 355007R92, 355007R94, 355370R93. Tractor Models: 100, 130, 140, 200, 230, C, Super A, Super A1, Super AV, Super AV1, Super C. This is an 18 piece kit and includes: Gasket 350706R3, Gasket 350708R2 (350708R1), Quad ring G46055 (353186R1), 2 O-rings 86553262 (253070R1), 2 O-rings 75285739 (350667R1), 2 O-rings 353184R1, 2 O-rings 355202R1, 2 Washers 355048R1, O-ring 353836R1, Woodruff key 124543 (106749, 126109), Jam nut 124925 (114494), Pin seal 353185R1, Oil seal 385038R91 (353183R91) used on early pumps. Replaces 354405R92, 355207R91, 360691R91, 355405R93, 355405R91 (Item #: 178947, Ref: 354405R92) $71.00

Hydraulic Pump Mounting Gasket - Used on many Farmall / International models, this gasket replaces OEM part numbers: 251068R1, 355362R91, 350708R1, 360691R91, 360957R91, 761107R93, 762318R91, 762200R92, 762309R91, 762428R91, 762197R91, 764940R91 (Item #: 167973, Ref: 350708R2) $2.60

Hydraulic Pump Shaft Oil Seal - This triple range lever oil seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 114, 120, 14, 314, 320, 501, 502, 100, 130, 140, 200, 230, 240, 2424, 2444, 424, 444, 330, 340, 404, 660, 770, 780, A, C, Super A, Super C, T340, T340A. Replaces: 132707R91, 23676D, 3069986R91, 353183R91, 353183R92, 353183R93, 381369R91, 385038R91, 721-3011, 751086R91, 751087R91, 921-3011 (Item #: 178140, Ref: A26778) $7.80

Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200; Replaces: 354354R3, 350429R1, 128999, 350646R1, 9706714, 353771R3, 355967R1, 350651R1, 355352R1, 354007R94, 354007R95, 354007R96, 354007R93, 354007R92, 350657R1, 354007R91, 70935118, 350672R1, 461173R1, 86553262, 238-6326, 350658R1, 350684R1, 75285739, 350706R2, 350706R3, 352221R1, 353771R2, 355966R1, 352024R2, 238-5114, 235760, 350667R1, 253070R1, 86629543 (Item #: 182474, Ref: IHS3020) $142.00

No
Picture
Pin for Hydraulic Touch Control - Rockshaft Clevis - For International / Farmall tractor models C, Super A, Super C, 100, 130, 140, 200, 230, Replaces International OEM number 350142R1, (Item #: 168926) $13.20

Touch Control Piston Sleeve Boot - This touch control piston sleeve boot fits the following tractor models: C, Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.425 inches, an overall outside diameter of 1.235 inches, a top hole diameter of 0.530 inches, and a bottom hole diameter of 0.875 inches. Replaces 351754R3, 364833R2. (Item #: 182534, Ref: 351754R3) $12.70

Touch Control Stop - Fits C, Cub, Super A, Super C, 100, 130, 140, 200. Cub uses 2 per tractor, other models use 4 per tractor. Sold individually. Will Not Fit 154, 184, 185 Replaces: 350717R91 (Item #: 161080, Ref: 350717R91) $13.90

Touch Control Valve Boot - This touch control valve boot fits the following tractor models: Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.450 inches, an overall outside diameter of 1.500 inches, a top hole diameter of 1.755 inches, and a bottom hole diameter of 0.725 inches. Replaces Leather Boot: 351753R3, 364832R1, 364832R2. (Item #: 178168, Ref: 351753R3) $11.20

Lights

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Item #: 111330, Ref: GC200) $15.30

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 110589, Ref: 358892R91) $2.98

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 185606, Ref: S.02377) $10.40

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 112980, Ref: 53525DA) $19.85

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Item #: 179762, Ref: 359773R91) $8.72

Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Item #: 178025, Ref: 350920R1) $10.00

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125672, Ref: R5362) $47.20

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107984, Ref: R5364) $35.98

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178354, Ref: R5366) $60.00

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107095, Ref: R5368) $40.00

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178387, Ref: R5361) $60.00

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125715, Ref: R5363) $49.60

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178351, Ref: R5365) $29.98

No
Picture
Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107094, Ref: R5367) $27.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Item #: 179711, Ref: 57313D) $10.80

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Item #: 105335, Ref: 355911R91) $73.00

Rear Combo Light Assembly -6Volt - Replaces 355911R91, manufactured to restoration standards. Rear combo light assembly, 6 Volt. Includes red jewel light with rotary switch. For: Cub, Super A and AV, C, Super C, H, HV, Super H and HV, M, MD, MDV, MV, Super M and MTA, O4, o6, ODS6, OS6, W6, WD6, W6TA, Super W6, W9, WDR9, WR9, Super W9, 100, 130, 140, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 105335, Ref: 355914R91-6V) $73.00

Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Item #: 111938, Ref: 358890R92-6V) $40.00

Sealed Beam Assembly - 6 Volt For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240. (Item #: 105333, Ref: R2714) $40.50

Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Item #: 161211, Ref: 358890R92-12V) $62.00

Sealed Beam Bulb, Red and White - 4.5 inch diameter, 12 volt. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Item #: 116014, Ref: 371461R92) $23.60

Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Item #: 185566, Ref: 375653R92) $17.70

Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A.350478R1 (Item #: 111330, Ref: GC200) $15.30

Miscellaneous

$Farmall Super A 3\8 inch Manifold Washer$
3/8" Manifold Washer - For International / Farmall tractor models A, B, C, H (used 3/8 NF), I4 (s/n 4112-earlier), I6 (s/n 1989-earlier), O4 (s/n 4112-earlier), O6 (s/n 1989-earlier), Super A, Super C, W4, W6, 100, 130, 140, 200, 230, 240, 330, 340 (Gas engine s/n 27740-earlier), Replaces International OEM number 24523D, (Item #: 125698) $2.30

Oil System

Oil Fill Breather Cap, NO Clip - 3-1/4 inches tall (says "OIL"). Fits A, Super A, B, C, Super C, 200, 300. Fits over a 1-1/2 inch pipe. Replaces 364899R91, 364901R91, 49049DX (Item #: 110064, Ref: R4459) $21.30

Oil Fill Breather Cap, With Clip - 3-1/4 inch tall (says "OIL"). Fits A, Super A, B, C, Super C, 200, 300. (Item #: 107000, Ref: R4458) $42.00

Oil Filter - Oil filter element, cartridge type. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Item #: 111120, Ref: 376374R91) $13.90

Oil Filter - For A, AV serial number 97398 and up, Super A, AV, B, BN serial number 97398 and up, Super C, 100, 130, 140, 200, 230, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (gas engines C113, C123, C135, C146, C153). Spin on type. (Item #: 111134, Ref: 538836R1) $14.40

Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For models using the original oil petcock in A, AV, B, BN, C, F12, F14, F20, F30, H, HV, I12, I14, I4, I6, M, MTA, MV, O12, O14, O4, O6, OS4, Regular, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, W12, W14, W30, W4, W6, 10-20, 15-30, 22-36 and early models of 350, 400, W400, W450 used to replace top oil checking petcock. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50

Oil Level Petcock - This oil level indicator system uses 2 petcock valves. Used on models A, AV, BN, C, F12, F14, F20, F30, H, HV, M, MTA, MV, Regular, Super A, Super AV, Super C, Super H, Super M, Super MV, 300, 400, Super MTA, Super W4, Super W6 and some other early IH and McCormick Deering models. McCormick Deering: 10-20, 15-30, 22-36. 3/8" pipe thread. Two used per tractor, sold individually. Replaces 1998TA, OGC200 (Item #: 126590, Ref: 1998TA) $16.90

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

Oil Pressure Gauge - Zone Style - with IH Logo without Studs For A, Super A, B, C, Super C (From 1947) (Item #: 113563, Ref: R3697) $41.20

Spin-On Oil Filter Adapter Kit - This Spin-On Oil Filter Adapter Kit Fits Gas and LP Engines in IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Fits IH Industrial: 2404, 2444, 2504, Crawlers: 500, 500C, T340, T340A, T4, T4B, T5, T5B, T5C, Forklift: 4000, Power Units: U123, U2, U2A, UC135, UC135B, UC153, Rubber Tired Loaders: 3514, H30F, H30R, H50. Fits Tractors: C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504. Fits Balers: 55T, 55W, 56T, 56W, 57T, Carrier: 660, Hi-Clear Sprayers: 770, 780, Windrowers: 161, 163, 201, 210, 225, 230, 275, 375; Replaces: 538828R91, 63856D (Item #: 184655, Ref: 538828R91KIT) $153.00

PTO / Driveline

Ball Bearing - Bearing has multiple applications for Farmall and IH tractors including 1-1/8 inch PTO output shaft bearing, forward and reverser clutch shaft bearing, a transmission countershaft rear bearing, a transmission input shaft bearing. Measures 1.181 inch inside diameter, 2.440 outside diameter. and 0.629 wide. Replaces: 112028R91, 116753A1, 210064, 23874D, 3100294R91, 3160416R91, 3174392R91, 3177807R1, 42842VA, 610020C91, 703980R91, 703981R91, 704771R91, 704771R92, 758352R91, 758354R91, 84004469, ST212, ST213, ST213T, ST429 (Item #: 180397, Ref: 9N715BC) $6.10

PTO and Belt Pulley Gasket Kit - This PTO and Belt Pulley Gasket Kit is four pieces containing one PTO to rear end housing gasket, one belt pulley cover gasket, one belt pulley shaft bearing cage gasket and one PTO drive bearing cage gasket. Used on: A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, 200, 230 and 240. Replaces: 1342404C1, 1342405C1, 46061DA, 47283D, 47283DA, 47283DB, 60581D, 60589D, 60589DA, 63779D (Item #: 178081, Ref: IHS2358) $29.10

PTO Seal - Single Lip Style. For tractor models A, B, C, Super A, Super B, Super C, 100, 130, 140, 200, 230, 240. Replaces 71719C1, 358816R91, 358776R91. Inside diameter 1.375 inches, outside diameter 2.506 inches, width .372 inches. (Item #: 128556, Ref: 48114D) $15.00

PTO Seal - Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 InchES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Item #: 114730, Ref: 45702D) $9.80

PTO Shaft - For A, AV, AV1, A1, B, C, Super A, Super C, 100, 130, 140, 200, 240, 300. PTO Shaft 540 RPM. 9.750 inches long. (Item #: 172597, Ref: 66184DA) $131.00

No
Picture
PTO Shaft Guard - PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Item #: 103975, Ref: 51484DX) $18.70

PTO Shield - For tractor models A, B, Super A, Super AV, C, Super C. PTO Shield for tractor models with Belt Pulley. (Item #: 103970, Ref: 55398DA) $71.00

PTO Shield - This Safety Shield if or A, B serial number 19975 and up. Super A, AV, C, Super C. PTO Safety Shield. For tractor models without belt pulley. Restoration quality. (Item #: 103969, Ref: 55403DA) $37.98

PTO Shield, RESTORATION QUALITY - For A, B, Super A, AV, C, Super C. PTO Shield for tractor models with Belt Pulley. RESTORATION QUALITY. (Item #: 103970, Ref: 55398DA-R) $71.00

Seats

Leaf Spring, Seat, LH - For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444. (Item #: 109588, Ref: 50586DB) $35.00

Leaf Spring, Seat, RH - For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444. (Item #: 112485, Ref: 50587DB) $29.80

Pan Seat Flip over with lock Rod - RED AND WHITE Vinyl Pan Seat, flip over seat with lock rod. Like Original Seat, complete with lock. A, AV, B, BN, Super A, Super AV, 100, 130, 140 (Early), [ International Utility: 300, 350 (with LOW-STYLE SEAT) ], Utility: 460 (with LOW-STYLE SEAT); Replaces: 354157R92, 50570DC (Item #: 101250, Ref: 50570DC) $233.00

Pan Seat Flip over with lock Rod - Silver Upholstered Pan Seat, flip over seat with lock rod. Like Original Seat, complete with lock. Fits A, B, BN, and Super A. Replaces 50570DC. (Item #: 101252, Ref: 50570DC_SILVER) $255.00

Seat Back - Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Item #: 180740, Ref: R3656) $46.70

Seat Bottom - Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Item #: 116173, Ref: R3655) $113.00

Seat Cushion, Base, Black - Wood Base, Black Vinyl. Fits Cub, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. (Item #: 173037, Ref: 363220R91-1) $35.00

No
Picture
Seat Custom with Fold Up Arms - Black vinyl assy. with fold up arm rests fits, 1030, 1031, 1032, 1070, 1175, 1190, 1200TK, 1290, 1390, 1470TK, 200, 230, 240, 2504, 300, 330, 340, 350, 400, 404, 450, 460, 480B, 503, 504, 560, 580B, 600, 606, 650, 660, 730, 740, 830, 840, 870, 930, 940. MUST USE ADAPTER FOR FOLLOWING MODELS, A, B, C, H, HV, M, MDV, MD, MV, Super H, Super A, Super M, W9, WD9, WDR9, WR9S. (USE ADAPTER # CSA300). (Item #: 101387, Ref: CS108-1V) $116.00

Seat Support Bracket - Left - This Seat Support Bracket fits A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Powder Coated. Replaces: 350007R2, 350007R3, 51181D (Item #: 126671, Ref: 51181D) $99.30

Seat Support Bracket - Right - This Seat Support Bracket fits A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Powder Coated. Replaces: 51182D (Item #: 126672, Ref: 51182D) $99.30

Sheet Metal / Body Parts

Battery Box - With lid. For Super A up to serial number 348643, C, Super C up to serial number 176522. Replaces OEM number 350637R92. Measures 7 1/8 inches wide, 9 inches long, 8 3/4 inches tall. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112490, Ref: 350634R91) $112.00

Battery Box - Restoration Quality. Fits C (when using later 4 piece box ), [ Super A, Super A-1, Super AV, Super AV-1 (serial number 348644 and up) ], Super C (serial number 176523 and up), 100, 130, 140, 200, 230; Replaces: 358542R11, 358541R11, 358540R11, 350637R92. Made in U.S.A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 110014, Ref: 358544R11) $185.00

Battery Box Cover - For Super A and AV, C, Super C, 100, 130, 140, 200 and 230. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104008, Ref: 350637R92) $45.00

Battery Box Front - For Super A after serial number 348644, Super C after serial number 176523, 100, 130, 140, 200, 230. Battery Box Front. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104011, Ref: 358542R11) $17.98

Battery Box Side - Left - For Super A after serial number 348644, Super C after serial number 176523, 100, 130, 140, 200, 230. Battery Box Side - left, with clips. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 358540R11) $54.00

Battery Box Side - Right - For Super A after serial number 348644, Super C after serial number 176523, 100, 130, 140, 200, 230. Battery Box Side - right, with clips. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104010, Ref: 358541R11) $66.01

Battery Hold Down Rubber - The battery hold down rubber is3/4 inches tall, inserts into the retainers in the battery box lid. These are sold EACH. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Item #: 116587, Ref: R5103) $4.80

Battery Lid T Bolt - This T bolt is used to attach the battery lid to the battery box for the following tractor models:A, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, and 230. Replaces: 50939DA and 50939DX. (Item #: 178094, Ref: 50939DA) $4.70

Fender, LH - For tractor models Super A, 100, 130, 140. **THERE IS AN ADDIONAL $10 SHIPPING CHARGE DUE TO SIZE/WEIGHT ON THIS ITEM** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126550, Ref: 350608R1) $246.00

Fender, RH - For tractor models Super A, 100, 130, 140. **THERE IS AN ADDIONAL $10 SHIPPING CHARGE DUE TO SIZE/WEIGHT ON THIS ITEM*** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126637, Ref: 350609R1) $246.00

No
Picture
Grille Screen - For International / Farmall tractor models A, B, C, Cub (s/n 222500-earlier with round hood / grille), Cub Lo-Boy (s/n 17200-earlier with round hood / grille), H, HV, I4, I6, I9, M, MD, MTA, O4, O6, O9, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MTA, W4, W6, W9, 100, 130, 140 (s/n 23300-earlier), 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, Size: 2' x 3' with 5 squares per inch, Wire Grille Screen Clips use Item #: 108001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112471) $21.60

Grill Screen - Original 3/16 inch wire mesh sheet. Each 24 inch x 36 inch, sheet is made of original thickness wire and includes clips. Cut sheet to appropriate grill screen size for your tractor. For Farmall models A thru 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 183867, Ref: R4476) $37.20

J-Hook Kit - J-Hook Kit for Hood 58144DX or 58145DX. (Item #: 185431, Ref: R5046) $80.00

Pedal Guard - For A, BN, Super A, 100, 130, 140. All without Foot Accelerator. Pedal Guard is 17 1/2 inches long without grease hole and painted red. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126599, Ref: 48697DB) $48.00

No
Picture
Toolbox - For tractor models A, Super A, B, 100, 130, 140. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103983, Ref: R4202) $78.00

Toolbox OEM Replacement - For tractor models A, Super A, B, 100, 130, 140. Toolbox. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103983, Ref: 43527DAX) $78.00

Wire Grille Screen Clips - 6 pack - For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, Super W4, Super W6, Super W9, Sold in packs of 6, (Item #: 108001) $8.00

Steering

Lower Steering Shaft Oil Seal - This lower steering shaft oil seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Replaces: 351276R91, 358775R91, 358804R91, 358815R91, 358838R91, 382230R91, 383333R91, 47703D, 530098R91, 65418C1 (Item #: 169955, Ref: 471765) $9.10

Spindle Bushing - Spindle bushing measures 1.237 inches inside diameter, 1.415 inches outside diameter, has a length of 1.760 inches and is .089 inches thick. For tractor models 100, 130, 140, A, A1, (AV, AV1 with fixed or adjustable front axle), Super A. (Item #: 172907, Ref: 356609R1) $18.10

Spindle, Left or Right - Has a vertical shaft that measures 13.125 inches in length and has a 1.234 inch diameter. For tractor models A, AI, Super A. The wheel bearing kit used for this spindle is part number WBKIH10. (Item #: 104314, Ref: 350603R91) $296.00

$Farmall Super A Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 13.625 inch, B= 1.234 inch, C= 1.189 inch, D= .750 inch. For tractor models 100, 130, (140 with cast wheels), (AV, AV1, A1, Super A all with fixed or adjustable front axle). Uses Wheel Bearing Kit number WBKIH10. (Item #: 104317, Ref: 356531R91) $174.00

Spindle - Right Hand and Left Hand, Used - For International tractor models A, Super A, Replaces International OEM number 350603R91, Right or Left Side Spindle, Dimension A: 13.125", Dimension B: 1.234", Dimension C: 1.189", Dimension D: .750", For a new version of this item use Item #: 104314, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404314) $177.01

Steering Gear Repair Kit - Fits Super A, 100, 130, 140. Contains items shown in picture. (Item #: 184168, Ref: S.59527) $73.00

Steering Sector Bushing, Bearing and Seal Kit - This 11-Piece Steering Sector Bushing, Bearing and Seal Kit Includes: Steering worm shaft bushing, steering wheel shaft bushing, steering worm wheel shaft bearing, steering worm bearing, steering gear housing gasket, steering worm oil seal, and steering worm wheel shaft oil seal. Bushings must be honed (reamed) to size when installed. Fits: A, AV, Super A, Super A1, Super AV, Super AV1, 100, 130, 140; Replaces: 1981225C1, 261733, 2099680, 358775R91, 358782R91, 358812R91, 358815R91, 382229R91, 382229R91, 382230R91, 41096DBR, 47675D, 47676DR, 47703D, 48956D, 85652H, R39667, ST287, ST288 (Item #: 182546, Ref: IHS1800) $85.00

Steering Sector Gear - For tractor models Super A, 100, 130, 140. 9 Tooth Worm Gear 1/4 inch Keyway. Use with 70890C1 Shaft. (Item #: 155422, Ref: 70888C1) $161.70

Steering Sector Gear - This Steering Sector Gear A (some), Super A, 100, 130; 9 full teeth, 3/16 inch Keyway. Replaces: 351815R1, 47677DA. (Item #: 126710, Ref: 47677DA) $150.00

Steering Sector Shaft - For tractor models Super A, 100, 130, 140. Shaft for 9 tooth worm gear part number 70888C1. Tapered shaft nut available as part number 359040R1. (Item #: 155424, Ref: 70890C1) $108.60

Steering Sector Shaft - Tapered shaft measures 3/16 inch keyway at gear end (straight end). Measures 1/4 inch wide keyway at the tapered end. For tractor models A (some), Super A, 100, 130. (Item #: 179276, Ref: 356549R1) $109.00

Steering Sector Shaft - Square end for for steering arm. For tractor models A, AV, Super A, Super AV, IA, ISA. (Item #: 178906, Ref: 47683DB) $149.94

Steering Sector Shaft Bushing - This bushing is used for Vertical Steering Sector Shafts on A, Super A, 100, 130, 140. It is 1.689 inches long with a 1.325 inch outside diameter and a 1.190 inch inside diameter. It must be reamed to size after installation. Replaces: 47676DR. (Item #: 179310, Ref: 47676DR) $23.20

Steering Shaft Support Knuckle - Knuckle with Grease Zerk for steering shaft. For tractor models A, A-I, AV, B, BN, Super A, Super A-1, Super AV, 100, 130, 140. Replaces 8329DX, 365002R11, 9442DX, 6852DX, IHS964. (Item #: 126714, Ref: 9442DX) $33.80

Steering Wheel - 14-3/4" diameter, 3/4" hub, for keyed shaft. For Cub, A and Super A to SN# 355669, B and C to SN# 75097. Plastic Covered Spokes. (Item #: 101428, Ref: 60069D) $42.00

Steering Wheel - 14-3/4 inch diameter, 3/4 inch hub, for keyed shaft. For Cub, A and Super A to serial number 355669, B and C to serial number 75097. Bare Metal Spokes. (Item #: 101428, Ref: 60069D-OE) $42.00

Steering Wheel - 17-5/8 inch diameter, 3/4 inch hub, for keyed shaft. 3 Spoke. Super A serial number 356000 and up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 and 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Item #: 101429, Ref: 60070D-OE) $41.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Item #: 157780, Ref: 353435X1) $1.00

Steering Wheel Shaft Worm Oil Seal - This steering wheel shaft worm oil seal measures 1.000 inch inside diameter, 1.624 inch outside diameter and has a .250 inch width. Used on A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140 all with Long Steering Wheel Shaft. Replaces: 358229R91, 358782R91, 358821R91, 383332R91, 48956D. (Item #: 126728, Ref: 48956D) $14.00

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $38.10

Tie Rod - Used with .875 inch outside diameter tie rod tube, A= 14.810 inch, B= .624 inch. For tractor models 100, 130, 140, (AV, AV1, A1, Super A all serial number 318310 and up). (Item #: 104366, Ref: 356544R11) $80.00

Tie Rod - A= 14.750 inch, B= .750 inch. For tractor models 100, 130, 140, (AV, AV1, A1, Super A serial number 318310 and up). (Item #: 104369, Ref: 360412R11) $60.00

Tie Rod Clamp - For International / Farmall tractor models A, Super A, 100, 130, 140, Replaces International OEM number 356546R1, (Item #: 104365) $7.60

Tie Rod, Clamp - For tractor models 100, 130, 140, A1 serial number 318310>, AV serial number 318310>, AV1 serial number 318310>, Super A serial number 318310>. (Item #: 104364, Ref: 356543R1) $13.50

Tie Rod End - For tractor models A, AV, B, BN, C, Super C, (Super A, Super AV serial number 250001 to 3318309). Replaces 57875D, 43468D. (Item #: 112118, Ref: 48280DB) $60.00

Tie Rod End - A= 3.060 inch, B= .687 inch, 18 NF left hand thread. For tractor models (AV, AV1, A1, Super A, 100, 130, 140 all with fixed axles), (2404, 2424, 2444, 404, 444 all with heavy duty front axle). (Item #: 104377, Ref: 356541R91) $19.00

Tie Rod End, Inner, RH Thread - 3-1/8 inch to center of post, .687 inch shaft diameter, 18 thread, used on tie rod assemblies with notched outer end and threaded inner end, for swept back adjustable axles 44 inches to 72 inches. For tractor models 100, 130, 140, 330, 340, 404, 424, 444, 454, 464, 484, 504, C, Cub Lo-Boy, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 100859, Ref: 356540R91) $16.10

Tie Rod Tube - 16.062 inch length, .875 inch outside diameter. Tie Rod tube for 100, 130, 140, (A1, AV, AV1, Super A - AFTER serial number 318310.) (Item #: 104363, Ref: 356548R2) $66.00

Tie Rod Tube - 16.125 inches long, 1.00 inch outside diameter, right hand thread, used with 360412R11 tie rod. For tractor models AV, AV1, Cub Lo-Boy, Super A, 100, 130, 140. (Item #: 104367, Ref: 360411R1) $59.00

Worm Gear Shaft Nut - For tractor models Super A, 100, 130, 140. Nut for Worm Gear Shaft part number 70890C1. (Item #: 155425, Ref: 359040R1) $8.20

Wheels

Bearing Cone - Outer cone for bearing kit FW101FS. For tractor models A, Super A, B, C, Super C, 100, 130, 200, 230. For 100, 130, 200, 230, A, B, C, Super C, Super A. (Item #: 182875, Ref: 13823V) $9.70

Bearing Cone - Inner cone for bearing kit FW101FS. For tractors A, Super A, B, C, Super C, 100, 130, 200, 230. For 100, 130, 200, 230, A, B, C, Super C, Super A (Item #: 172510, Ref: 54631H) $8.30

Bearing Cone, Wheel - For tractor models 100, 130, (140 with cast wheels), 200, 230, A, A1, (AV, AV1, with fixed or adjustable wheels), B, C, Super A. (Item #: 09074) $8.80

Felt Washer Front Wheel Hubs - For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 200, 230, Replaces International OEM number 49118DA, Felt, I.D.: 1.806", O.D.: 2.574", Width: 0.166", (Item #: 112155) $5.40

Front Rim - Adjustable, blank front rim (no center). 3 x 15, with 3 loops. For tractor models A, Super A, Super A1 B and C and Super C, 100, 130, 140, 200, 230 with Adjustable Tread Wheels. (Item #: 103752, Ref: 57095D) $70.00

Front Wheel Felt Seal, Felt - This front wheel felt seal has a 1.688 inch Inside Diameter, a 2.539 inch Outside Diameter and is .345 inch wide. It Fits: B, BN (with double front wheel), C, Super A (special adjustable front wheel only), Super C, 200, 230 (tri-cycle only). Replaces: 55453D (Item #: 112172, Ref: 55453D) $5.00

Front Wheel Hub Cap, Used - For International tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Combine(s) 403, Compatible with International Harvester(s) 720, 781, 830, 881, Replaces International OEM nos 49115D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432088) $48.01

Oil Seal - Outer cup for bearing kit FW101FS. For tractor models A, Super A, B, C, Super C, 100, 130, 200, 230. For 100, 130, 200, 230, A, B, C, Super C, Super A. Replaces 43463D, 359788R91, 43463DA, 200640 (Item #: 173924, Ref: 43463D) $13.80

No
Picture
Rear Rim - 24" x 8", four loop. For model B, C, A, Super A, BN, 100, 130, 140. (Item #: 178346, Ref: R2062) $274.00

Rear Rim - For A, Super A, B, C, 100, 130, and 140. 9 X 24 with four mounting lugs. Replaces 56205DB. (Item #: 103716, Ref: 114713C1) $177.00

Rear Rim 10 x 24 - This four loop rear rim fits the following tractor models: A, B, BN, Super A, 100, 130, 140, 240, and others. It measures 14 inches from center to center on the loops, and 20 inches center of center of loops across the center of rim with the valve stem hole located on the loop side closest to the edge of the rim. Please verify correct rim size and do not use tire size to determine correct size. This rim replaces 354876R91 and 374807R91. (Item #: 103717, Ref: 56206DA) $134.00

Rear Rim 8x24 - This 8 Inch x 24 Inch Rim has 4 loops. The loops are 14 inches center to center going around the rim, 20 inches center to center across the rim. Uses 5/8 inch bolts. The original bolts may not work. Used with 8.3-24 and 9.5-24 tires. Replaces part numbers 354873R92, 51281DB. (Item #: 103715) $130.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 703929R1. (Item #: 184824, Ref: 350719KIT) $23.50

No
Picture
Rear Rim - Models B,C - Four loop, 8" x 24", for Models B, C, A, Super A, BN, 100, 130, 140. (Item #: 178346, Ref: R2062) $274.00

Rubber Bushing - For International / Farmall tractor models A, B, C, Cub (Lo-Boy), H, I4, O4, O6, Super A, Super C, Super M, Super W4, Super W6, W4, 100, 130, 140, 200, 230, Replaces International OEM number 51689D, (Item #: 126648) $3.98

Rubber Bushing Retainer - For International / Farmall tractor models A, B, C, Cub, H, I4, O4, Super A, Super C, Super H, Super M, Super W4, Super W6, Super W9, W4, W6, 100, 130, 140, 200, 230, 600, 650, Replaces International OEM number 50942D, (Item #: 126651) $3.80

Wheel Bearing Kit - For tractor models A, AI, B, C, Super A, 100, 130, 200, 230, 140 with cast wheels, (AV, AV1 ALL with fixed or adjustable front). Parts include OEM numbers: 15118 (Cone), 15250B (Cup), 09074 (Cone), 09196 (Cup), 49118DA (Felt Seal), 55453D (Felt Seal), 49117D (Seal Retainer), 43463D (Seal). (Item #: 104389, Ref: WBKIH10) $41.20

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.87

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.10

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.60

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.90

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.50

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.20

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.20

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.90

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.00

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.40

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.40

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.30

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.60

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.00

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.20

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.30

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.30

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.40

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.70

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.80

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $11.10

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $18.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $94.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.60

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.70

$Farmall Super A Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $27.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $108.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $176.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Farmall Super A Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall Super A Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall Super A Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$Farmall Super A Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall Super A Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall Super A Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall Super A Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $35.90

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $367.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $441.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $441.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.28

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.90

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $120.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.70

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $98.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $45.00

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $42.00

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $385.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $68.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $55.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.50

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $34.90

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $278.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $39.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $103.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $307.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $16.50

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $109.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.30

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $116.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00