FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall Super AV Tractor Parts

[Categories] [All Farmall Models] [Print]

Brakes

Brake Band - Lined Brake Band (1). For A, Super A to serial number 339641, B. If a final drive gasket set is needed, order part number 43245D. Replaces: 51582DDX. (Item #: 105417, Ref: 51582DBX) $38.90

Brake Pedal Shaft, LH - Fits A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Item #: 153603, Ref: 51425DX) $171.87

Brake Pedal Shaft, RH - This brake pedal shaft is the right hand side. It is for models A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Item #: 153602, Ref: 51507D) $168.00

Brake Return Spring - For tractor models 100, A, AV, B, BN, Super A, Super AV, 130, 140. Overall length 7 inch, 2 used for brake pedals, 1 used for clutch pedal. (Item #: 125754, Ref: 47845DA) $14.60

Final Drive Gasket Kit - This 4 piece Final Drive Gasket Kit Includes (1) rear axle housing oil pan gasket, (2) rear axle outer bearing retainer gaskets, (1) rear axle housing inner bearing cap gasket. 2 used per tractor, sold individually. Fits: A, AV, B, BN, Super A, Super A1, Super AV, Super AV1; Replaces: 43245D, 47954D, 48009D, 48009DB (Item #: 182489, Ref: 43245D) $22.30

Clutch

Clutch Release Bearing Carrier - This clutch release bearing carrier is the carrier only, does not include bearing. For tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 (Direct replacement for the following when equipped with replaceable throwout bearing A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C) replaces the graphite style (non-replaceable) throwout bearing and carrier number 350830R31 used on early models. Replaces: 6116D, IHS1155. Uses release bearing part number 361292R91. (Item #: 111782, Ref: 375493K-Sleeve) $83.00

Clutch Release Yoke - This clutch release yoke is 7 5/8 inches overall length. For models A, AI, AV, B, BN, C, Super A, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404. Industrial A1, 2404. Replaces 47716D (Item #: 178919, Ref: 47716D) $62.80

Cooling System

Fan Assembly - For tractor models A, Super A serial number 250001-317191, Super AV, Super A1, Super AV-1 (ALL A and Super A series between serial number 250001 and 317191), B, C, Super C. Fan measures 15 5/8 inches, pulleys measure 3 3/4 inch and 3 1/4 inch diameter. Replaces OEM number 701360R91, 131489C91, 70136D, 70212D. (Item #: 100772, Ref: 701360R) $85.00

Fan Belt - This Fan Belt measures 35.00 inches length and 0.700 inch width, For, 130 GAS, 200 GAS, 230 GAS, C GAS with WATER PUMP, Super A GAS serial number 48000 to 48499, Super AV GAS serial number 48000 to 48499, Super C GAS serial number 100001 to 114645, Super C GAS serial number 114646 and up. B with water pump. Please verify measurements before ordering (Item #: 111155, Ref: 60712D) $14.80

Fan Belt - For tractor models A, B, C (with C-113 engine; without water pump), Super A. 3/4 inch x 34 inch. (Item #: 153766, Ref: 46869D) $12.30

Fan Pulley Assembly, Late - This pulley assembly fits Cub and Cub Lo-Boy C-60 engine serial number 165153 and up, Super A with C-113 engine serial number 317192 and up, Super AV and Super AV1 with C-123 engine, Super AV1 with C-113 engine serial number 317192 and up, Super C with C-123 engine, 100 and 130 with C-123 engine, (200, 230 and 240 with C-123 engine below serial number 65000). Fan mounting bolt thread is 12-24 UNC, 3.125 inch bolt pattern. Shaft is 5/8 inch -18 Thread. 4.379 inch outside diameter rear pulley. 4.062 inch outside diameter front pulley. VERIFY MEASUREMENTS. Will not fit 154, 184 or 185. (Item #: 126187, Ref: 131486C91) $152.00

Generator Belt - For tractor models 130, 200, 230, (A, AV serial number 317191 and up), B, BN, Super A, Super AV, (Super C serial number 114646 and up). All with gas engines. 1/2 X 28.125 (Item #: 172686, Ref: 52318DA) $5.90

Radiator - For tractor models Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 200 and 230. This radiator is for PRESSURIZED systems only. Inlet = 2-1/2". Outlet = 2". The core is 16-1/8 inches high and 16 inches wide. NOT FOR EARLY TRACTORS THAT DID NOT HAVE A WATER PUMP. Replaces 356356R96, 358104R93 (Item #: 101710, Ref: 356356R94) $410.00

Radiator - This Radiator fits all A, B and BN models as well as Super AV and Super AV-1. It will fit older non-pressurized systems and is close to, but not exactly like original. For original non-pressurized, see part number 58124DBX. If using this radiator to replaces an older non-pressurized radiator, you will also need to replace the cap with part number RW0021-9 (4 lb cap). If replacing the cap for a pressurized system use cap part number 825702M2 (7 lb cap). Core Height 15 7/8 inches, Core Width 16 inches, Depth 2 inches. Replaces original part numbers 358105R91, 58124DBX (Will need new cap). (Item #: 101706, Ref: 358105R91) $390.00

Radiator - This radiator is for the early models without water pump. Has 2 Inch Inlet and Outlet Tubes. Fits A and AV after serial number 41330, B and BN after serial number 40193, (Super A, Super AV, Super AV-I, all to serial number 355669) all without water pump. Has 2 inch inlet and outlet tubes. Core size is 17 3/8 inches wide X 16 1/2 inches high. Does not come with a cap. Uses Radiator Cap part number 43983D. (Item #: 125004, Ref: 58124DBX) $429.00

Radiator Cap - This is a 4lb Radiator Cap used with 358105R91 when replacing a non-pressurized radiator. (Item #: 178173, Ref: RW0021-9) $8.20

Radiator Cap - This is a 7 pound Radiator Cap used with 358105R91 for a pressurized system. Replaces: 361705R91, 362323R91. (Item #: 169633, Ref: 825702M2) $11.60

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.90

Decals and Emblems

Decal Set - For Super AV Culti-Vision. Complete Decal Set. (Item #: 101048, Ref: R2570) $64.00

Hood Emblem - For Super A, Super AV, C, Super C. Hood Emblem, "IH". Size is 1 7/8 inch x 2 1/4 inch. (Item #: 103913, Ref: 352580R1) $14.50

Drive Train

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00

Rear Outer Flanged Axle Seal - This Rear Outer Flanged Axle Seal measures 2.125 inches inside diameter, 3.001 inches outside diameter and 0.434 inches wide. Fits A, AV, B, BN, Super A, Super A1, Super AV, Super AV1. Replaces original part numbers 358767R91, 358810R91, 43283D, 71697C1 (Item #: 167998, Ref: 15287A) $9.60

Rear Stub Axle Felt Washer - This Rear Stub Axle Felt Washer measures 2.920 inches outside diameter, 2.000 inch inside diameter and is 0.375 inches thick. A, AV, B, BN, Super A, Super A1, Super AV, Super AV1. Two used per tractor. Sold individually. Replaces: 15017D, 43242D. (Item #: 178083, Ref: 43242D) $14.20

Seal, Differential Ball Bearing - For tractor models A, A1, AI, AV, B, BN, Super A, Super A1, Super AV, Super AV1, 100, 130, 140. This seal measures 2.378 inches outside diameter, 1.531 inches inside diameter and 0.500 inches wide. wide. 2 used per tractor, sold individually. Replaces: 358773R91, 358813R91, 381742R91, 383340R91, 385865R91, 45175D, 46282D, 71597C1, 71597C91 (Item #: 172757, Ref: 71597C1) $26.30

Transmission Gasket Kit - This three piece Transmission Gasket Kit includes transmission shift cover gasket, transmission spline shaft bearing retainer gasket and counter shaft bearing cage gasket. It fits: A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Replaces original part numbers 1342393C1, 46503D, 47279DA, 47283D, 47283DB (Item #: 178158, Ref: 1342393C1) $32.00

Electrical System

Alternator Bracket Kit - This alternator bracket has a 2 inch gap for the alternator part number 8NE10305SE and will fit the following tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 200, 230, will also work for Power units U2, U2A. (Item #: 127584, Ref: IHALTBKIT) $65.00

Battery Box Panel - Left Hand - For International / Farmall tractor models Super A (s/n 348644-later), Super AV (s/n 348644-later), Super C (s/n 176523-later), 100, 130, 140, 200, 230, Replaces International OEM number 358540R11, Includes clips, (Item #: 104009) $74.17

Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $114.00

Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $114.00

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Item #: 104554, Ref: 1750411M91) $8.70

Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80

Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $17.90

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA. All with Delco Vertical Conversion Distributor 1111411). (Item #: 103153, Ref: 1900119) $9.00

Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $31.40

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.20

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.80

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Farmall / IH with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. This if for vertical Delco Distributors. Not for IH Distributors or Magnetos. Replaces: 120622, 817363, 1914142, 1914144, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $14.40

Distributor with Electronic Ignition - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Item #: 113311, Ref: 107304C91-6V) $655.78

Distributor with Electronic Ignition - 12V - New and complete distributor comes with a 32 tooth gear, and is FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Item #: 113361, Ref: 107304C91-12V) $674.02

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $186.00

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Item #: 105071, Ref: 1142) $154.00

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $160.00

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Item #: 108148, Ref: 1142P12) $177.00

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with Delco distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Item #: 105072, Ref: 1142P6) $160.00

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $11.10

Generator Belt - For tractor models (A, AV serial number 250001 to 317191), B, BN, C, Super A, Super AV, (Super C serial number 100001 to 114645) all with gas engines. 1/2 X 26.125. (Item #: 161749, Ref: 49291D) $10.40

H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $21.98

Ignition Tune-up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414, I4, I6, MTA, MV, O4, O6, T6, U2, W4, W6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. Not for IH Distributors. (Item #: 103151, Ref: ATK1DCR) $9.80

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $9.00

Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $11.00

Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $16.00

Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Item #: 105669, Ref: 1925781) $9.20

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Item #: 110972, Ref: 1918322) $10.00

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Item #: 117534, Ref: 79407H) $6.50

Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $30.30

Tune-up Kit - This Tune-up Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. Note, not for British Delco Distributors 7953342. (Item #: 173738, Ref: MFITK10) $27.30

No
Picture
Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models Super A, Super AV, A1 all with magneto. (Item #: 182743, Ref: 350732R91) $115.00

Engine Bearings

Main Bearings 0.030 - Main bearing set in 0.030. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240. Journal measures 2.095. YTO MBK113-030. Replaces 372116R91 and 7372116 (Item #: 106564) $75.01

Main Bearings .010 - Main bearing set in 0.010. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240. Journal measures 2.115. YTO MBK113-010. Replaces 376639R91 and 7376639. (Item #: 106562) $57.00

Main Bearings .020 - Main bearing set in 0.020. For C113 and C123 4-cylinder gas engines. (1 Kit used per engine). For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, F12, F14, 100, 130, 140, 200, 230, 240. Journal measures 2.105. YTO MBK113-020. Replaces 376642R91 and 7376642. (Item #: 106563) $86.75

Rod bearings - Rod bearing in .030. For C113 and C123 Gas engines. Journal Measure 1.720 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-030, 356305R1, and 7356305. Sold individually. (Item #: 106448) $16.40

Rod Bearings - Rod bearing in .002. For C113 and C123 Gas engines. Journal Measure 1.748 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-002, 360218R11, and 7356306. Sold individually. (Item #: 106445) $14.90

Rod Bearings - Rod bearing in .020. For C113 and C123 Gas engines. Journal Measure 1.730 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-020, 376638R11, and 7376638. Sold individually. (Item #: 106447) $5.80

Rod Bearings - Rod bearing in standard. For C113 and C123 Gas engines. Standard Journal Measure 1.750 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-STD, 356304R11, and 7356304. Sold individually. (Item #: 106444) $12.40

Rod Bearings, .010 - Rod bearing in .010. For C113 and C123 Gas engines. Journal Measure 1.740 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Replaces YTO CRK113-010, 376636R11, and 7376636. Sold individually. (Item #: 106446) $13.30

Engine Gaskets

Crank Seal, Front - For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 swrial number <22113, U-2A serial number <22113. (Item #: 172671, Ref: 389407R92) $9.90

No
Picture
Crank Seal, Rear - Fits, 100, 130, 140, 200, 22, 230, 330 serial number <100500, 340 serial number <100500, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 serial number <22113, U-2A serial number <22113. (Item #: 106651, Ref: 24425D) $19.20

Gasket, Manifold, Pack of 2 - Used with 251175R1 Manifold. Fits Models: A, B, C, Super C, Super AV, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 240, 330, 340, 404, 424, 444, A1, T4B, AI, All with 113, 123, 135, 146 and 153 CID Gas, LP or Distallate engines. Price is for two. Replaces 24520D, 24520DA, 352014R1, 48696D, 48696DA (Item #: 101551, Ref: 352014R1) $12.30

Gasket Set Upper - For early engines without a water pump. For C113 Gas engine in models: A, AV, B, BN, C, Super A, Super AV Only Fits 9 Stud Cylinder Head, not the 14 Stud. (Item #: 106676, Ref: 354474R95) $32.30

Head Gasket - Head gasket for 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super AV - all with C113 engine. (Item #: 168314, Ref: 366301R11) $35.40

Oil Pan Gasket - For 140, 130, 100, 140, 300, 22, 230, 240, 330, 340, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, SUPVER AV, Super C, - ALL WITH C113 OR C123 ENGINES. (Item #: 106698, Ref: 43458DB) $8.10

Oil Seal - Fits: [A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240 (use as a flat belt pulley shaft seal)], [H, HV, Super H, Super HV (use as a transmission counter shaft front seal)], [O4, W4 (Used as a brake shaft oil seal)]; The seal measures 1.375 inches inside diameter, 2.110 inches outside diameter, 0.315 inches wide. Replaces: 356502R91, 356503R91, 358781R91, 358820R91, 367810R91, 369146R91, 43308D, 43660D, 48308D, 48954D, 71700C1, 71701C1. (Item #: 152182, Ref: 71701C1) $5.10

Rear Crankshaft Seal Kit - Fits tractor models A, AV, B, BN, C, F12, F14, I12, I14, O12, O14, W12, W14 (2-piece rear felt seal ONLY fits as a rear crankshaft seal), Super A, Super A-1, Super AV, Super AV-1, Super C 340 (gas, up to engine serial number 100500), 100, 130, 140, 200, 230, 240, 330. Replacement part number and kit contents: (2) 24425D, 24425DA felt seals, (2) 43447D, 43447DA seal retainer center gaskets, (1) 43448D seal retainer to block gasket, (4) 43445D seal plate felt plugs, and (4) 43446D, 43446DA seal retainer plate gaskets. (Item #: 182488, Ref: IHS2416) $25.10

Timing Cover Gasket Set - This Timing Cover Gasket Set contains: Governor housing gasket, Water pump plate gasket, Fan bracket gasket, Timing cover gasket, Front crankshaft seal with seal saver and Lower water outlet gasket. Use on C113, C123, C135, C146, and C153 Gas or LP engines. Fits A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 330, 3514, 404, 424, 444, 504. Replaces OEM part numbers: 45875D, 375745R1, 375745R2, 43294D, 43294DA, 46179D, 46179DC, 43442D, 49177D, 378193R91, 46871D, 68104C1, 68104C2. (Item #: 182535, Ref: 46179DKit) $32.00

Valve Cover Gasket - This Valve Cover Gasket is used on Gas Engines; C113, C123, C135, C146, C153. It replaces OEM/Original part numbers 43378DB, 43378DD, 43378DE. (Item #: 128613, Ref: 43378DE) $10.40

Valve Seals - Valve Guide Seal - Positive Type (Item #: 183858, Ref: 386192R1) $3.10

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings with Flat Head Pistons - Basic Engine Kit, Less Bearings, for A and AV, B and BN, Super A and AV to serial number 310299, C. Cylinder sleeves are 3-5/16 (3.3125) inches O.D. at the seal. (C113 CID 4-cylinder Gas). For tractors with flat head standard compression pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3 inch to 3-1/8 inch), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 131096, Ref: BEKH1150-LCB) $400.00

Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons - Basic Engine Kit, Less Bearings for A and AV, B and BN, Super A and AV to serial number 310299 (C113 CID 4-cylinder Gas). For tractors with stepped head high compression pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (overbore from 3 inch to 3-1/8 inch), pins and retainers, complete gasket set with crankshaft seals. Sleeves are 3-5/16 inch outside diameter at the seal. For engines without factory water pump. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130577, Ref: BEKH1154-LCB) $455.00

Basic In-Frame Engine Kit, with Flat Head Pistons - For A and AV, B and BN, Super A and AV to serial number 310299, and C. Kit contains complete sleeve and piston kit with rings, pins and retainers (overbore 3 inch to 3-1/8 inch, block seal land ID 3.311 inches), upper gasket set (with head gasket) and pan gasket. (Item #: 184556, Ref: BIFH1150) $334.00

Basic In-Frame Engine Kit, with Stepped Head Pistons - For A and AV, B and BN, Super A and AV to serial number 310299 and C. (C113 CID 4-cylinder Gas). For tractors with stepped head high compression pistons. Kit contains complete sleeve and piston kit with rings (overbore from 3 inches to 3-1/8 inches, block seal land ID 3.311 inches), pins and retainers, upper gasket set (with head gasket), and pan gasket. (Item #: 184554, Ref: BIFH1154) $340.00

Engine Overhaul Kit, Comprehensive, Less Bearings with Flat Head Pistons - Overhaul kit, less bearings. For A and AV, B and BN, Super A and AV to serial number 255417 (C113 CID 4-cylinder gas). For tractors with flat head standard compression pistons. Kit contains sleeves and sleeve seals, flat head pistons and piston rings (overbore from 3 inch to 3-1/8 inch), pins and retainers. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. Valve length is 4-25/32 inch. (Item #: 187185, Ref: EOK1150-LCB) $849.00

Engine Overhaul Kit, Comprehensive - Less Bearings - with Stepped Head Pistons - Overhaul kit for A and AV, B and BN, Super A and AV to serial number 255417 (C113 CID 4-cylinder gas). For tractors with stepped head high compression pistons. Contains sleeve and piston kit (sleeves, pistons and rings, pins and retainers, overbore from 3 inch to 3-1/8 inch). Complete gasket set. Valve parts: (intake and exhaust valves, springs, guides and keys). IMPORTANT: specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: 186985, Ref: EOK1154-LCB) $745.18

Valve Overhaul Kit - C113 and C123 Gas - Fits Super A, AV serial number 255418 to serial number 310299, C and Super AI, AV1 serial number 310300 and up, Super C, 100 and 200. Valve Length 4-57/64 inch, (Gas 4 cylinder, C113, C123 CID). Replaces exhaust valves marked 57798D and intake valves marked 57797D. Kit includes valves, valve springs (for non-roto exhaust valve), valve keys, valve guides. (Item #: 183984, Ref: VOKH123) $140.00

Valve Train Kit - For 113 CID Gas Engine (valve length 4.83 inch). Models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super AV, U-2 serial number <22113, U-2A serial number <22113. Kit includes 4 intake valves, 4 exhaust valves, 8 valve springs, 8 valve guides, 16 valve keys. (Item #: 172565, Ref: VTK113) $191.00

Engine Parts

Camshaft Timing Gear - 66 teeth. For tractor models (100, 130, 140, 200, 230, 240, Super C all with 123 CID engine), (330, 340, 404 all with 135 CID engine), (424 with 146 CID engine), (444, 504 with 153 CID), (A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1 with 113 CID engine). Replaces 375712R1, 6779DB. (Item #: 111038, Ref: 375712R1) $92.00

Crankshaft Timing Gear - 33 teeth, used in C113, C123, C135, C146, and C153 Engines. For tractor models A, Super A, AV, Super AV, B, BN, C, Super C, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504. (Item #: 121687, Ref: 46870DA) $65.00

Governor Arm, Rockshaft - For tractor models (200, 230, 240 serial number up to 65000 with C123 engine), A, A1, AV1, B, C, Super A, Super AV, Super C. (Item #: 105380, Ref: 6507DA) $39.10

Governor Spring - This Governor Spring is used internally in the following tractors: A, AV, B, BN, Super A, Super A1, Super AV, Super AV1, 100, 130, 2404 (With C-113, C-123 or C-135 engines), 404. It replaces: 46944DA (Item #: 179295, Ref: 46944DA) $12.60

No
Picture
Governor Thrust Bearing Assembly - This 3 piece bearing assembly slides onto the governor assembly. For models cub, A, B, C, Super C, 560, Super AV, 184, AV, Bn, Cub Lo-Boy, Super A, 100, 130, 140, 154, 185, 200, 230, 240, 330, 340, 404, 424, 444, 460, 504. Also replaces 55314D. (Item #: 184444, Ref: 43481D) $52.00

Pushrod - Fits A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, U2, U2A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (all with C113, C123, C135, C146, C153 gas/LP engines) 10.762 inch length, 0.310 inch tube diameter . Replaces: 360213R91, 357548R1, 47386D, 47385D. (Item #: 182498, Ref: 47385D) $43.00

No
Picture
Push Rod, Used - For International tractor models A, B, BN, C, Super A, Super AV, Super C, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine(s) C123, C135, C146, C153, Compatible with International Hay Cutting(s) 201, Replaces International OEM number 357548R1, For a new version of this item use Item #: 182498, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463344) $24.01

Ring Gear,Flywheel - For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 240. Gear has 90 teeth, 10.495 inch inside diameter and 11.435 inch outside diameter, .50 inches wide. (Item #: 103906, Ref: 55755DB) $32.50

No
Picture
Valve, Exhaust - For tractor models A, AV, B, BN, Super A, Super AV, to serial number 255417. (flat head compression piston) (cylinder sleeve 3-5/16 inch outside diameter at seal) (valve length 4-25/32 inch). SOLD by the EACH. (Item #: 128739, Ref: 42025DA) $20.10

Valve, Exhaust - For Models: A, AV, Super A and Super AV serial number 255418 to serial number 310299, and C. (flat head compression piston) (cylinder sleeve 3-5/16 inch outside diameter at seal) (1.160 inch head diameter, 4.940 inch length, 45 degree). Sold single. (Item #: 128524, Ref: 57798D) $13.40

Valve Guide - Valve guide for tractor models 100, 130, 140, 200, 22, 230, 240, (330, 340 serial number 100500 and before), 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super AV, Super C, (U2, U2A serial number less than 22113). Price shown is for each, sold only in multiples of 8 items. (Item #: 128646, Ref: 356583R21) $4.50

Valve, Intake - Intake valves for Models: A, AV, B, BN, Super A, Super AV, to serial number 255417. (cylinder sleeve 3-5/16 inch outside diameter at seal) (valve length 4-25/32 inch). Price shown is for each. (Item #: 128522, Ref: 42024D) $18.90

Valve, Intake - For tractor models: A, AV, Super A and Super AV serial number 255418 to serial number 310299, and C. (flat head compression piston) (cylinder sleeve 3-5/16 inch outside diameter at seal) (1.340 inch head diameter, 4.940 inch length, 45 degree). Sold single. (Item #: 128523, Ref: 57797D) $10.80

$Farmall Super AV Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 100, 200, A, AV, B, BN, C, Super AV, Super C, Super A. Contains: springs, guides, locks, (no valves). (Item #: 131579, Ref: VSKH113) $225.00

Valve Spring - Used on valves with length of 5-5/16 inch. For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A serial number less than 22113), W4. 8 Used Per Tractor. Sold individually. (Item #: 128518, Ref: 24544DA) $3.30

Engine Pistons and Sleeves

Pin Bushing - This Piston Wrist Pin Bushing Is used on 113 and 123 Gas and LP Engines. 0.909 inch I.D. 0.993 Inch O.D. 1.216 inch overall length. Pin Bushings require honing after installation. Replaces: 24415D, 64508D (Item #: 108092, Ref: 64508D) $10.00

Piston Sleeve - Fits 113 CID, 123 CID 4 cylinder gas engines with 3 1/8 inch bore (3 inch bore no longer available). 3.31 inches OD sleeve at seal. Models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super AV, Super AV serial number 255418-310299, U-2 serial number <22113, U-2A serial number <22113. Pricing is per liner. 3.31 inch outside diameter sleeve at seal. (Item #: 172546, Ref: SW52) $22.70

Sleeve and Piston - This sleeve and piston is for one cylinder and is stepped head piston. For Super A and Super AV to serial number 310299, A, AV, B, BN, C. For C113 Gas Engine. Contains: sleeve, stepped head piston and rings, pin and retainers. Overbore from 3 inch to 3-1/8 inch. 3-15/16 inch OD on the sleeve at the seal. Sold per piston. 4 used per engine. (Item #: 166570, Ref: PK154) $85.00

$Farmall Super AV Sleeve and Piston Kit 3 1\8 Bore$
Sleeve and Piston Kit 3 1/8 Bore - This sleeve and piston kit is for 1 hole using a Flat Head Piston on 113 CID, 123 CID 4 cylinder gas engine models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super AV, Super AV serial number 255418-310299, U-2 serial number <22113, U-2A serial number <22113. (Item #: 184584, Ref: SK260) $157.00

$Farmall Super AV Sleeve and Piston Kit 3 1\8 Bore$
Sleeve and Piston Kit 3 1/8 Bore - This sleeve and piston kit is for 1 hole using a Stepped Head Piston in 113 CID, 123 CID 4 cylinder gas engine models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super AV, Super AV serial number 255418-310299, U-2 serial number <22113, U-2A serial number <22113. (Item #: 166570, Ref: SK265) $85.00

Sleeve and Piston Kit, Flat Head Pistons - This sleeve and piston kit is for 1 engine (4 holes). For tractor models A and AV, B and BN, Super A and AV to serial number 310299, C, 130, 140, 230, 240. For C113 and C123 Gas engines. Contains (4) sleeves, (4) flat head pistons and rings, pins and retainers. Overbore from 3 inch to 3-1/8 inch. (Item #: 184099, Ref: PK150) $385.00

No
Picture
Sleeve Assembly - C123 CID 4 cylinder gas engines with stepped head pistons. 3-7/16 inch outside diameter at seal area. For tractor models 100, 200, Super AV serial number 310300 and up, Super AV1 serial number 310300 and up, Super C. (Item #: 173469, Ref: SK275) $157.00

No
Picture
Sleeve Seal Rings - Sleeve seal o-ring kit for 1 cylinder on 113 or 123 CID Gas engines with a 3 5/16 inch diameter at the seal for models: A, AV, AV1, B, BN, C, Super A, Super AV, 130, 140, 230, 240. Replaces 367799R1, 354881R1, 367799R1 (Item #: 173279, Ref: SRK713) $5.50

No
Picture
Sleeve Seals - For 1 cylinder. For tractor models 200, Super AV, Super AV1, Super C, 100 all with C123 engine. For tractor models 330, 340 both with C135 engine. (Item #: 128639, Ref: SRK701) $5.40

Engine Rings

Piston Ring Set - Ring set for 4 pistons, for C123 CID gas 4 cylinder engine. Overbore 3-1/8 inch to 3-1/4 inch. Contains (for each Piston): 3 compression rings at 3/32 and oil ring at 3/16 per cylinder. For tractors: Super A-1 AV-1 serial number 310300 and up. Super C~ 100 and for H, HV, O4, OS4, W4. Replaces 31R500, 2C4215, RP191451 (Item #: 185209, Ref: PRS159) $83.00

No
Picture
Piston Ring Set - 3-1/8 inch bore, 8 compression rings at 3/32 inch, 4 oil rings at 1/4 inch. For tractor models 100, 130, 140, 200, 230, 240, Super C, (Super A, Super AV serial number 310300 and up). All with C123 gas engine. And for tractor models A, B, C, 130, 140, all with C113 CID with 3 1/8 inch overbore. (Item #: 130029, Ref: 2C7696) $123.00

No
Picture
Piston Ring Set, 3-1/8 - Ring set for 4 pistons, for C113 CID gas 4 cylinder engine. Overbore 3 to 3-1/8 inch, cylinder sleeve 3-5/16 inch outside diameter. Contains 3 compression rings at 1/8 inch and oil ring at 1/4 inch per cylinder. For tractors: Super A and AV serial number 255418 to serial number 310299 and C. For 2806, 2826, 2856, 806, 826, 856. If used in replacing piston rings for a Tisco Engine Kit sold after 11/15/08, use part number PRS154. (Item #: 185124, Ref: PRS150) $193.00

No
Picture
Piston Ring Set, 3-1/8 - Ring set for 4 pistons. For C113 CID gas 4 cylinder engine. Overbore 3 to 3-1/8 inch, cylinder sleeve 3-5/16 inch outside diameter. Contains 2 compression at 3/32, 1 oil at 3/16 per cylinder. For tractors: A and AV, B and BN and Super A and AV to serial number 255417. (Item #: 174369, Ref: PRS154) $76.00

No
Picture
Piston Ring Set, Standard 3 Inch Bore - Ring set for 4 pistons, for C113 CID gas 4 cylinder engine. Original 3 inch bore. Contains 3 compression rings at 1/8 and oil ring at 1/4 inch per cylinder. For tractors: A, B, Super A and AV serial number 255418 to serial number 310299 and C. For 2806, 2826, 2856, 806, 826, 856. (Item #: 184943, Ref: 1486596) $151.00

Exhaust System

Muffler - Vertical muffler for gas tractors. Inlet inside diameter 1-15/16 inch, outlet outside diameter 2 inch, length 29 inch, diameter 4-1/4 inch round body. Fits engines C113, C123, C135. For tractor models: A, AV, Super A, Super AV, B, BN, C, Super A-1, Super AV-1, 330, Super C, 100, 13 For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 133340, Ref: 360720R91) $46.10

Muffler - Vertical muffler for gas tractors. Fits short clearance muffler for tobacco or grove application, engines: C113, C123, C135. Inlet inside diameter 1-15/16 inch, outlet inside diameter 2 inches, length 18 inches, diameter 4-1/4 inches, round body. For tractor models A, AV, Super A and AV, B and BN, C, Super For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 178978, Ref: 360720TOB) $88.00

Muffler Clamp - Muffler clamp. For 100, 130, 140, 200, 230, 240, 340, 404, 424, 460, 504, 560, 606, 656, 660, 664, A, B, C, Super AV, Super C, Super A bad part (Item #: 180044, Ref: 48889DA) $13.50

Fuel System / Air Intake

Carburetor Choke Lever - This choke lever is used on carburetors with a splined choke shaft. Fits: Zenith carburetors 9748, 9749, 9750, 9752, 10112, 10386A, 10386B, 10386C, 10441, 10441A, 10498, 10514, 10514A, 10522, 10522A, 10652. Marvel Schebler carburetors TSX156, TSX157, TSX171, TSX198, TSX319, TSX333, TSX347, TSX348. International / Farmall carburetors 352376R92, 354184R93, 355485R91, 373957R91, 52499DB, 69401D Replaces original part number 8639D. (Item #: 126958, Ref: 8639D) $19.30

Carburetor Float, Zenith - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Item #: 108454, Ref: CTP28) $16.20

Carburetor Fuel Needle - Main Jet Needle Assembly. For Zenith carburetors series 161 model numbers 9749, 10441, 10522, and 13876. For A, AV, B, BN, C, Super AV, Super C, Super A. (Item #: 108462, Ref: 71-28) $12.60

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5/16 inch A, B, C, Super C, Super AV, Super AV-1, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, A1 with the following carburetors: TSX114, TSX156, TSX157, TSX159, TSX171, TSX198, TSX253, TSX319, TSX333, TSX338, TSX347, TSX348, TSX422, TSX44, TSX597, TSX635, TSX663, TSX696, TSX730, TSX744, TSX748, TSX827, TSX896, TSX896SL, TSX926, TSX930, TSX936, TSX94, TSX948, TSX949, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.20

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877, 14007, 13794, 13794B, and OEM 375560R91. (Item #: 183586, Ref: BK44V) $28.30

Carburetor Kit, Basic - For C, Super A, Super AV, Super C, all with original Carter Carburetors EXCEPT UT2703. Basic Kit includes Gaskets, Float Valve and Throttle Shaft. CCK01 (Item #: 111604, Ref: BK200V) $22.80

Fuel Line - Pipe, fuel strainer to carburetor with two nuts. For tractor models Super A and AV SN# 356001 and up, Super C, 100, 200. This fuel line is used when tractors are equipped with 5/16 inch fuel fittings. Verify before ordering. (Item #: 172869, Ref: 356355R11) $30.10

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3/8 inch pipe inlet, 5/16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Item #: 113653, Ref: 17215DA) $70.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Item #: 105364, Ref: 49923D) $3.50

Gauges

Touch Control Temperature Gauge - For tractor models Super A, Super AV, Super C, 100, 130, 140, 200. Touch Control Temperature Gauge with Zone Style, "IH" Logo. Replaces 356466R91, 356465R91, 355840R91. (Item #: 124419, Ref: 355841R91) $62.98

Hydraulic System

Hydraulic Pump - For tractor models A, AV, Super A, Super AV, Super C, C, 100, 130, 140, 200, 230. Also Replaces OEM number 360689R91, 360689R92 360945R92 and 360945R91. (Item #: 104229, Ref: 384506R94) $555.00

Hydraulic Pump Kit - This is a Thompson Hydraulic Pump Gasket, O-Ring and Seal Kit used on Thompson 360945R91 and 360945R92 hydraulic pumps. Used on 100, 130, 140, 200, 230, C, Super A, Super A1, Super AV, Super AV1, Super C. Contains Gasket 350708R2 (350708R1), Gasket 350706R3, Oil seal 385038R91 (353183R91), Main body O-ring 510185 (293726R1), O-ring 352024R2, 2 O-rings 75285739 (350667R1), Woodruff key 126-109 (106749), Jam nut 124925 (114494). Replaces 360957R91 (Item #: 184756, Ref: 360957R91) $59.00

Hydraulic Pump Kit - This is a Pesco Hydraulic Pump Gasket, O-Ring and Seal Kit used on Pesco Pumps: 360689R91, 350707R96, 355007R91, 355007R92, 355007R94, 355370R93. Tractor Models: 100, 130, 140, 200, 230, C, Super A, Super A1, Super AV, Super AV1, Super C. This is an 18 piece kit and includes: Gasket 350706R3, Gasket 350708R2 (350708R1), Quad ring G46055 (353186R1), 2 O-rings 86553262 (253070R1), 2 O-rings 75285739 (350667R1), 2 O-rings 353184R1, 2 O-rings 355202R1, 2 Washers 355048R1, O-ring 353836R1, Woodruff key 124543 (106749, 126109), Jam nut 124925 (114494), Pin seal 353185R1, Oil seal 385038R91 (353183R91) used on early pumps. Replaces 354405R92, 355207R91, 360691R91, 355405R93, 355405R91 (Item #: 178947, Ref: 354405R92) $71.00

Hydraulic Pump Mounting Gasket - Used on many Farmall / International models, this gasket replaces OEM part numbers: 251068R1, 355362R91, 350708R1, 360691R91, 360957R91, 761107R93, 762318R91, 762200R92, 762309R91, 762428R91, 762197R91, 764940R91 (Item #: 167973, Ref: 350708R2) $2.60

Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200; Replaces: 354354R3, 350429R1, 128999, 350646R1, 9706714, 353771R3, 355967R1, 350651R1, 355352R1, 354007R94, 354007R95, 354007R96, 354007R93, 354007R92, 350657R1, 354007R91, 70935118, 350672R1, 461173R1, 86553262, 238-6326, 350658R1, 350684R1, 75285739, 350706R2, 350706R3, 352221R1, 353771R2, 355966R1, 352024R2, 238-5114, 235760, 350667R1, 253070R1, 86629543 (Item #: 182474, Ref: IHS3020) $142.00

Touch Control Piston Sleeve Boot - This touch control piston sleeve boot fits the following tractor models: C, Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.425 inches, an overall outside diameter of 1.235 inches, a top hole diameter of 0.530 inches, and a bottom hole diameter of 0.875 inches. Replaces 351754R3, 364833R2. (Item #: 182534, Ref: 351754R3) $12.70

Touch Control Valve Boot - This touch control valve boot fits the following tractor models: Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.450 inches, an overall outside diameter of 1.500 inches, a top hole diameter of 1.755 inches, and a bottom hole diameter of 0.725 inches. Replaces Leather Boot: 351753R3, 364832R1, 364832R2. (Item #: 178168, Ref: 351753R3) $11.30

Lights

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 110589, Ref: 358892R91) $2.98

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 185606, Ref: S.02377) $10.70

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Item #: 179762, Ref: 359773R91) $8.72

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125672, Ref: R5362) $46.70

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107984, Ref: R5364) $32.98

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178354, Ref: R5366) $61.00

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107095, Ref: R5368) $40.70

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178387, Ref: R5361) $61.00

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125715, Ref: R5363) $49.40

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178351, Ref: R5365) $29.98

No
Picture
Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107094, Ref: R5367) $27.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Item #: 179711, Ref: 57313D) $11.10

Rear Combo Light Assembly -6Volt - Replaces 355911R91, manufactured to restoration standards. Rear combo light assembly, 6 Volt. Includes red jewel light with rotary switch. For: Cub, Super A and AV, C, Super C, H, HV, Super H and HV, M, MD, MDV, MV, Super M and MTA, O4, o6, ODS6, OS6, W6, WD6, W6TA, Super W6, W9, WDR9, WR9, Super W9, 100, 130, 140, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 105335, Ref: 355914R91-6V) $73.00

Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Item #: 111938, Ref: 358890R92-6V) $40.00

Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Item #: 161211, Ref: 358890R92-12V) $62.00

Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A.350478R1 (Item #: 111330, Ref: GC200) $15.30

Oil System

Oil Filter - Oil filter element, cartridge type. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Item #: 111120, Ref: 376374R91) $14.20

Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For models using the original oil petcock in A, AV, B, BN, C, F12, F14, F20, F30, H, HV, I12, I14, I4, I6, M, MTA, MV, O12, O14, O4, O6, OS4, Regular, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, W12, W14, W30, W4, W6, 10-20, 15-30, 22-36 and early models of 350, 400, W400, W450 used to replace top oil checking petcock. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50

Oil Level Petcock - This oil level indicator system uses 2 petcock valves. Used on models A, AV, BN, C, F12, F14, F20, F30, H, HV, M, MTA, MV, Regular, Super A, Super AV, Super C, Super H, Super M, Super MV, 300, 400, Super MTA, Super W4, Super W6 and some other early IH and McCormick Deering models. McCormick Deering: 10-20, 15-30, 22-36. 3/8" pipe thread. Two used per tractor, sold individually. Replaces 1998TA, OGC200 (Item #: 126590, Ref: 1998TA) $16.90

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60

Spin-On Oil Filter Adapter Kit - This Spin-On Oil Filter Adapter Kit Fits Gas and LP Engines in IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Fits IH Industrial: 2404, 2444, 2504, Crawlers: 500, 500C, T340, T340A, T4, T4B, T5, T5B, T5C, Forklift: 4000, Power Units: U123, U2, U2A, UC135, UC135B, UC153, Rubber Tired Loaders: 3514, H30F, H30R, H50. Fits Tractors: C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504. Fits Balers: 55T, 55W, 56T, 56W, 57T, Carrier: 660, Hi-Clear Sprayers: 770, 780, Windrowers: 161, 163, 201, 210, 225, 230, 275, 375; Replaces: 538828R91, 63856D (Item #: 184655, Ref: 538828R91KIT) $153.00

PTO / Driveline

Ball Bearing - Bearing has multiple applications for Farmall and IH tractors including 1-1/8 inch PTO output shaft bearing, forward and reverser clutch shaft bearing, a transmission countershaft rear bearing, a transmission input shaft bearing. Measures 1.181 inch inside diameter, 2.440 outside diameter. and 0.629 wide. Replaces: 112028R91, 116753A1, 210064, 23874D, 3100294R91, 3160416R91, 3174392R91, 3177807R1, 42842VA, 610020C91, 703980R91, 703981R91, 704771R91, 704771R92, 758352R91, 758354R91, 84004469, ST212, ST213, ST213T, ST429 (Item #: 180397, Ref: 9N715BC) $6.10

PTO and Belt Pulley Gasket Kit - This PTO and Belt Pulley Gasket Kit is four pieces containing one PTO to rear end housing gasket, one belt pulley cover gasket, one belt pulley shaft bearing cage gasket and one PTO drive bearing cage gasket. Used on: A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, 200, 230 and 240. Replaces: 1342404C1, 1342405C1, 46061DA, 47283D, 47283DA, 47283DB, 60581D, 60589D, 60589DA, 63779D (Item #: 178081, Ref: IHS2358) $29.10

No
Picture
PTO Shaft Guard - PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Item #: 103975, Ref: 51484DX) $18.70

PTO Shield - For tractor models A, B, Super A, Super AV, C, Super C. PTO Shield for tractor models with Belt Pulley. (Item #: 103970, Ref: 55398DA) $75.00

Seats

Leaf Spring, Seat, LH - For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444. (Item #: 109588, Ref: 50586DB) $35.00

Leaf Spring, Seat, RH - For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444. (Item #: 112485, Ref: 50587DB) $29.60

Pan Seat Flip over with lock Rod - RED AND WHITE Vinyl Pan Seat, flip over seat with lock rod. Like Original Seat, complete with lock. A, AV, B, BN, Super A, Super AV, 100, 130, 140 (Early), [ International Utility: 300, 350 (with LOW-STYLE SEAT) ], Utility: 460 (with LOW-STYLE SEAT); Replaces: 354157R92, 50570DC (Item #: 101250, Ref: 50570DC) $221.00

Seat Support Bracket - Left - This Seat Support Bracket fits A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Powder Coated. Replaces: 350007R2, 350007R3, 51181D (Item #: 126671, Ref: 51181D) $99.30

Seat Support Bracket - Right - This Seat Support Bracket fits A, AV, B, BN, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Powder Coated. Replaces: 51182D (Item #: 126672, Ref: 51182D) $99.30

Sheet Metal / Body Parts

Battery Box - With lid. For Super A up to serial number 348643, C, Super C up to serial number 176522. Replaces OEM number 350637R92. Measures 7 1/8 inches wide, 9 inches long, 8 3/4 inches tall. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112490, Ref: 350634R91) $112.00

Battery Box Cover - For Super A and AV, C, Super C, 100, 130, 140, 200 and 230. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104008, Ref: 350637R92) $42.90

Battery Lid T Bolt - This T bolt is used to attach the battery lid to the battery box for the following tractor models:A, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, and 230. Replaces: 50939DA and 50939DX. (Item #: 178094, Ref: 50939DA) $5.40

Steering

Lower Steering Shaft Oil Seal - This lower steering shaft oil seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Replaces: 351276R91, 358775R91, 358804R91, 358815R91, 358838R91, 382230R91, 383333R91, 47703D, 530098R91, 65418C1 (Item #: 169955, Ref: 471765) $9.10

Steering Sector Bushing, Bearing and Seal Kit - This 11-Piece Steering Sector Bushing, Bearing and Seal Kit Includes: Steering worm shaft bushing, steering wheel shaft bushing, steering worm wheel shaft bearing, steering worm bearing, steering gear housing gasket, steering worm oil seal, and steering worm wheel shaft oil seal. Bushings must be honed (reamed) to size when installed. Fits: A, AV, Super A, Super A1, Super AV, Super AV1, 100, 130, 140; Replaces: 1981225C1, 261733, 2099680, 358775R91, 358782R91, 358812R91, 358815R91, 382229R91, 382229R91, 382230R91, 41096DBR, 47675D, 47676DR, 47703D, 48956D, 85652H, R39667, ST287, ST288 (Item #: 182546, Ref: IHS1800) $85.00

Steering Sector Shaft - Square end for for steering arm. For tractor models A, AV, Super A, Super AV, IA, ISA. (Item #: 178906, Ref: 47683DB) $149.00

Steering Shaft Support Knuckle - Knuckle with Grease Zerk for steering shaft. For tractor models A, A-I, AV, B, BN, Super A, Super A-1, Super AV, 100, 130, 140. Replaces 8329DX, 365002R11, 9442DX, 6852DX, IHS964. (Item #: 126714, Ref: 9442DX) $33.80

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Item #: 157780, Ref: 353435X1) $1.00

Steering Wheel Shaft Worm Oil Seal - This steering wheel shaft worm oil seal measures 1.000 inch inside diameter, 1.624 inch outside diameter and has a .250 inch width. Used on A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140 all with Long Steering Wheel Shaft. Replaces: 358229R91, 358782R91, 358821R91, 383332R91, 48956D. (Item #: 126728, Ref: 48956D) $14.00

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $38.10

Tie Rod End - For tractor models A, AV, B, BN, C, Super C, (Super A, Super AV serial number 250001 to 3318309). Replaces 57875D, 43468D. (Item #: 112118, Ref: 48280DB) $60.00

Tie Rod End, Inner, RH Thread - 3-1/8 inch to center of post, .687 inch shaft diameter, 18 thread, used on tie rod assemblies with notched outer end and threaded inner end, for swept back adjustable axles 44 inches to 72 inches. For tractor models 100, 130, 140, 330, 340, 404, 424, 444, 454, 464, 484, 504, C, Cub Lo-Boy, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 100859, Ref: 356540R91) $16.10

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

$Farmall Super AV Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $102.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $153.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $110.21

$Farmall Super AV Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

$Farmall Super AV Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall Super AV Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Farmall Super AV Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

$Farmall Super AV Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Farmall Super AV Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.60

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $16.90

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $13.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $28.40

$Farmall Super AV Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $45.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.60

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.50

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $48.60

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.20

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $55.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $42.20

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $40.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.70

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $40.00

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $119.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $54.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.50

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $23.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.90

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $57.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $23.30

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $9.40

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $23.30

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.10

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $86.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $12.40

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $60.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $23.70

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $7.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $63.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.30

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $13.98

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.80

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $13.98

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $7.80

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $315.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.80

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $55.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $62.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $113.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $65.00