FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Farmall Tractor Axle

Click here to see parts by model

Farmall Wheel Bearing Kit, Wide Axle Assembly - For tractor models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A (Cone), 14274 (Cup), 1779 (Cone), 43828D (Gasket), 704083R1 (Seal), 48548D (Seal Retainer), 1729 (Cup). Inner bearing inside diameter is 1.37 inch, outside diameter 2.71 inch. Outer bearing inside diameter is 0.93 inch, outside diameter 2.23 inch, seal inside diameter is 1.74 inch, outside diameter 2.83 inch. (Item #: 100853, Ref. WBKIH4) $40.00

$photo of For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1\2 inches long and 4 1\2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D$
Farmall Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1\2 inches long and 4 1\2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref. 358976R31) $462.00

$photo of One 2-1\2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D.$
Farmall Seal, Rear Axle - One 2-1\2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D. (Item #: 151917, Ref. 377786R1) $15.50

No
Picture
Farmall Axle Extension Tube - Standard duty, 11-5\8 . For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108809, Ref. 3036) $206.98

No
Picture
Farmall Axle Extension Tube - schwartz part (Item #: 110830, Ref. 3037) $168.98

Farmall Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Item #: 120010, Ref. 7453) $976.00

$photo of For Schwartz aftermarket front end. 11-5\8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M.$
Farmall Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5\8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 111582, Ref. 7465) $343.00

$photo of For Schwartz aftermarket front end. 9-5\8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M.$
Farmall Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5\8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 172645, Ref. 7470) $406.00

$photo of For 2-3\4 inch axles (inside diameter 2-3\4 inch, outside diameter 3-5\8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3\4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB$
Farmall Axle Seal, Rear - For 2-3\4 inch axles (inside diameter 2-3\4 inch, outside diameter 3-5\8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3\4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref. 377788R1) $16.10

Farmall Tie Rod, DU Axle - Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Item #: 108804, Ref. 22813) $61.00

$photo of Thread is 3\4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin).$
Farmall Axle Pivot Ball - Thread is 3\4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin). (Item #: 108885, Ref. 65320C3) $21.70

Farmall Axle Seal, Rear Outer - This outer seal measured 3.250 inches inside diameter, 4.139 inches outside diameter, .555 inches thickness. For tractor models 1026, 1066, 1086, 1206, 1256, 340, 3688HC, 460, 504, 706, 756, 766, 806, 826, 856, 966, 986, Hydro 100, Hydro 186. (Item #: 128501, Ref. 378077R91) $26.20

$photo of Standard duty. Fits Schwartz\Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351.$
Farmall Thrust Bearing, Axle - Standard duty. Fits Schwartz\Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref. T163) $21.70

Farmall Axle, Center - Fits 52 inch to 76 inch, for ball type stay rod, if 223314 cylinder pin used can replace OEM part number 71818C91. For tractor models Hydro 100, Hydro 186, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586. (Item #: 163301, Ref. 71816C91) $1179.01

Farmall Bushing, Front Axle, Steering Arm - Associated with 379555R11 steering arm. For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. (Item #: 104493, Ref. 379748R1) $9.80

Farmall Bushing, Front Axle Steering Arm - For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. Replaces 153687C1. (Item #: 104494, Ref. 405574R1) $7.00

Farmall Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref. BH1317) $15.50

Farmall Axle Nuts - Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 173624, Ref. 15622BH) $1.50

Farmall Rear Axle Outer Seal - Outer seal, must reuse your seal retainer. For tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 358799R1 and 547431R91. 2.125 inside diameter, 3.066 outside diameter, width is .510 inches. (Item #: 126592, Ref. 350822R91) $18.00

Farmall Rear Stub Axle Felt Washer - This Rear Stub Axle Felt Washer measures 2.920 inches outside diameter, 2.000 inch inside diameter and is 0.375 inches thick. A, AV, B, BN, Super A, Super A1, Super AV, Super AV1. Two used per tractor. Sold individually. Replaces: 15017D, 43242D. (Item #: 178083, Ref. 43242D) $14.20

Farmall Rear Outer Flanged Axle Seal - This Rear Outer Flanged Axle Seal measures 2.125 inches inside diameter, 3.001 inches outside diameter and 0.434 inches wide. Fits A, AV, B, BN, Super A, Super A1, Super AV, Super AV1. Replaces original part numbers 358767R91, 358810R91, 43283D, 71697C1 (Item #: 167998, Ref. 15287A) $9.60

Farmall Axle Oil Seal - This axle oil seal fits the following tractor models: A, Super A, 100, 130, 140, and Cub. It has an inside diameter of 1.750 inches, an outside diameter of 2.632 inches, and a width of 0.500 inches. It replaces part numbers: 264698R91, 273563R91, 275596R91, 357768R91, 382220R91, 383387R91, and 53599D. (Item #: 182568, Ref. 264698R91) $20.00

Farmall Rear Axle - This Rear Axle is used on IH B275, B414, 354, 364, 384, 3414. 8 Lug, 6 Inch Bolt Circle, 13 Spline. Replaces Original Part Number 3043997R12 (Item #: 180262, Ref. 3043997R12) $218.00

Farmall Rear Axle Seal - This�rear axle seal has a 2.313 inch Inside Diameter, a 3.256 inch Outside Diameter and is .438 inch wide. It Fits:�C, Super C, 200, 230, 240, 2404, 404. Replaces: 358791R91, 358826R91, 380770R91, 530096R92, 60254D, 610867C91, 610867C92, HA396, 450317 (Item #: 168018, Ref. 60254D) $22.70

Farmall Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref. 48841D) $13.50

Farmall Front Axle Pivot Shaft - This Front Axle Pivot Shaft is 13.250 inches Long. It is used on 2400, 2500A, 380B, H84, 385, 395, 454, 464, 484, 485, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895, CX100, CX50, CX60, CX70, CX80, CX90. Replaces 405564R91, 405577R1, 405577R2, 527790R91, 538688R91, 539128R1 (Item #: 124722, Ref. 539128R1) $218.00

Farmall Front Axle Knee, Left Side - This Front Axle Knee is used on the left side. It measures (A) 9.250 inches from the top of the bearing to top of the tube. It comes with 368621R1 bushings installed. Bushings have a 1.451 inch inside diameter. Used with 365317R91 thrust bearing, not included. It is used on 454, 464, and 484 Tractors, North American with Swept Back Axles. Replaces 66695C91, 405707R12 (Item #: 110734, Ref. 66695C91) $468.00

Farmall Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 330 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref. E1NN3N267AA) $2.30

Farmall Front Axle Pinion Shaft Seal - Used on APL 335 Mechanical Four Wheel Drive Axles, this seal is located at the input shaft to the differential. Replaces OEM numbers 83945747, ZP0750110088, 81233C1 (Item #: ZP0750110088) $32.27

Farmall Front Axle Knee - Used on axles that adjust from 58 to 82 inches in width, the diameter of the axle is 4.375 inches. It is used with spindles that are 12.750 inches vertical shaft with an 1.667 inch shaft diameter. This Axle Knee comes with bushings. Replaces 531260R92, 531260R93 (Item #: 109445, Ref. 531260R92) $290.00

Farmall Front Axle Knee, Left Side - Used on the following with Swept Back Axles: 2500A, 385, 395, 484, 485, 495, 584, 585, 595, 685, 695, 885, 895, 995, 574. This Front Axle Knee measures 9.500 inches from the top of the thrust bearing to the top of the tube. Comes with 358958R2 bushing. If thrust bearing is needed, order 185106C1. Replaces 66701C91, 405712R12 (Item #: 110733, Ref. 405712R12) $532.00

Farmall Front Axle Knee, Right Side - Used on the following with Swept Back Axles: 2500A, 385, 395, 484, 485, 495, 584, 585, 595, 685, 695, 885, 895, 995, 574. This Front Axle Knee measures 9.500 inches from the top of the thrust bearing to the top of the tube. Comes with 358958R2 bushing. If thrust bearing is needed, order 185106C1. Replaces 405713R12, 66702C91 (Item #: 108890, Ref. 405713R12) $526.00

Farmall Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref. AL33349) $240.62

Farmall Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. Used on International models: 585, 644, 685, 743, 744, 745, 785, 844, 856, 885 (Item #: 124660, Ref. L35603) $382.00

Farmall Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. Used on International models: 585, 644, 685, 743, 744, 745, 785, 844, 856, 885 (Item #: 124661, Ref. L35604) $181.98

Farmall Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. International models: 585, 685, 743XL, 745XL, 785, 844XL, 856XL, 884, 885 (Item #: 115716, Ref. AL32883) $141.00

Farmall Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. International models 644, 744, 844 (Item #: 160162, Ref. AL32884) $338.00

$photo of Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575\1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1$
Farmall Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575\1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref. CAR1015751) $92.58

Farmall Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref. CAR115715) $8.70

No
Picture
Farmall Front Axle Pin Kit - This kit contains: 2 trunnions (531237R1), 2 bushings (533283R1), 2 trunnion bolts (531238R1) 5\8 inch x 16 UNF, 2 bushings (71788C1), 1 yoke pin (531239R1) length 7.44 inches, and an outside diameter measuring .997 of an inch. For the following models: 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 766, 786, 886, 966, 986, Hydro 186. (Item #: 531239R1KIT) $91.43

Farmall Front Axle Basic Overhaul Kit - This kit contains Contains: 2 trunnions (531237R1), 2 bushings (533283R1), 2 trunnion bolts (531238R1), 2 bushings (71788C1), 1 yoke pin (531239R1). It is used on the following tractors: Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088 (with round tube axle), 3288 (with round tube axle), 3388, 3488 (with round tube axle), 3688 (with round tube axle), 5088 (with round tube axle), 5288 (with round tube axle), 5488 (with round tube axle) (Item #: 112534) $96.00

Farmall Axle Knee - Used on International 544, 656, 2544, 2656 tractors, this axle knee is for 56 to 80 inch adjustable tread. The tube is 3.25 inches. The knee is 11.812 tall. Uses 124558 Bolts and 116643 nuts, sold separately. Replaces 397059R91. (Item #: 114387) $167.98

$photo of Used to secure front axle knees, this bolt measures 4-3\4 inches overall, 4 inches to the shoulder and has 3\4-16 UNF RH Thread. If nuts are needed, order 116643. Replaces part number 405584R1$
Farmall Front Axle Bolt - Used to secure front axle knees, this bolt measures 4-3\4 inches overall, 4 inches to the shoulder and has 3\4-16 UNF RH Thread. If nuts are needed, order 116643. Replaces part number 405584R1 (Item #: 124558) $9.90

$photo of Used with part number 124558 to secure axle knees, this nut is 3\4 inch -16 UNF thread. Replaces 405576R1$
Farmall Front Axle Nut - Used with part number 124558 to secure axle knees, this nut is 3\4 inch -16 UNF thread. Replaces 405576R1 (Item #: 116643) $2.50

Farmall Axle Knee Right Hand - Used on the following tractors with straight front axles: 685, 695, 884, 895, Hydro 84, 684, 784, 885. For Left Hand order 108810. Replaces 3116437R91 (Item #: 108811) $191.98

Farmall Axle Knee Left Hand - Used on the following tractors with straight front axles: 685, 695, 884, 895, Hydro 84, 684, 784, 885. For Left Hand order 108811. Replaces 3116436R91 (Item #: 108810) $333.98

$photo of <UL> <li>For International \ Farmall tractor models 424, 444, 504, 606, 2424, 2444, 2504, 2606, 2656<\li> <li>Replaces International OEM number 379531R1<\li> <li>Front Axle Pivot Bushing<\li> <\UL>$
Farmall Bushing, Front Axle Pivot - For International \ Farmall tractor models 424, 444, 504, 606, 2424, 2444, 2504, 2606, 2656 Replaces International OEM number 379531R1 Front Axle Pivot Bushing (Item #: 104489) $24.80

$photo of <UL> <li>For International \ Farmall tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1468, 1486, 1566, 1568, 3488, 3688, 5088<\li> <li>Replaces International OEM number 531237R1<\li> <\UL>$
Farmall Front Axle Trunnion - For International \ Farmall tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1468, 1486, 1566, 1568, 3488, 3688, 5088 Replaces International OEM number 531237R1 (Item #: 109440) $14.98

$photo of <UL> <li>For International \ Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488<\li> <li>Replaces International OEM number 120732C2<\li> <li>Rear Pin<\li> <li>3.540 Long<\li> <li>1.248 Diameter<\li> <\UL>$
Farmall Axle Pivot Pin - For International \ Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488 Replaces International OEM number 120732C2 Rear Pin 3.540 Long 1.248 Diameter (Item #: 110108) $59.00

$photo of <UL> <li>For International \ Farmall tractor models Hydro 100, Hydro 186, 766, 786, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 5088, 6388, 6588, 6788, 21456<\li> <li>Replaces International OEM number 539827R2, 539827R1<\li> <li>With Nut<\li> <li>6.50 Long<\li> <li>7\8 - 14 UNF<\li> <\UL>$
Farmall Axle Clamp Bolt and Nut - For International \ Farmall tractor models Hydro 100, Hydro 186, 766, 786, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 5088, 6388, 6588, 6788, 21456 Replaces International OEM number 539827R2, 539827R1 With Nut 6.50 Long 7\8 - 14 UNF (Item #: 111420) $26.40

$photo of <UL> <li>For International \ Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3688<\li> <li>Replaces International OEM number 650247R1<\li> <li>Used with 137663C91, 71818C91, 71816C91<\li> <\UL>$
Farmall Front Axle Pin - For International \ Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3688 Replaces International OEM number 650247R1 Used with 137663C91, 71818C91, 71816C91 (Item #: 117032) $10.00

$photo of <UL> <li>For International \ Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256<\li> <li>Compatible with International Construction and industrial models 21206, 21256<\li> <li>Replaces Case IH OEM number 350557R1<\li> <li>0.739 Dia.<\li> <li>6.616 Long<\li> <li>1.125 Head<\li> <li>For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle.<\li> <li>With adjustable wide front axle<\li> <\UL>$
Farmall Front Axle Clamp Pin - For International \ Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256 Compatible with International Construction and industrial models 21206, 21256 Replaces Case IH OEM number 350557R1 0.739 Dia. 6.616 Long 1.125 Head For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle. With adjustable wide front axle (Item #: 158235) $11.90

$photo of <UL> <li>For International \ Farmall tractor models 5088, 5288, 5488<\li> <li>Replaces International OEM number 1259511C2<\li> <li>Outside Diameter: 1.999 <\li> <li>Length: 7.80 <\li> <\UL>$
Farmall Front Axle Pivot Pin - For International \ Farmall tractor models 5088, 5288, 5488 Replaces International OEM number 1259511C2 Outside Diameter: 1.999 Length: 7.80 (Item #: 164687) $99.00

$photo of <UL> <li>For International \ Farmall tractor models 5088, 5288, 5488<\li> <li>Replaces International OEM number 1259512C2<\li> <li>Outside Diameter: 1.248 <\li> <li>Length: 3.94 <\li> <\UL>$
Farmall Rear Axle Pivot Pin - For International \ Farmall tractor models 5088, 5288, 5488 Replaces International OEM number 1259512C2 Outside Diameter: 1.248 Length: 3.94 (Item #: 164688) $52.00

$photo of <UL> <li>For International \ Farmall tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986<\li> <li>Replaces International OEM number 531851R1<\li> <li>Pin Diameter: .743 <\li> <li>Length: 6.75 <\li> <li>Head Diameter: 1.125 <\li> <\UL>$
Farmall Front Axle Clamp Pin - For International \ Farmall tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986 Replaces International OEM number 531851R1 Pin Diameter: .743 Length: 6.75 Head Diameter: 1.125 (Item #: 170358) $29.90

No
Picture
Farmall Complete Front Axle Overhaul Kit - For International \ Farmall tractor models Hydro 100 (Late, with Axle Pivot Ball, Not PIN), 766 (Late, with Axle Pivot Ball, Not PIN), 786 (with Axle Pivot Ball, Not PIN), 886 (with Axle Pivot Ball, Not PIN), 966 (Late, with Axle Pivot Ball, Not PIN), 986 (with Axle Pivot Ball, Not PIN), 1066 (Late, with Axle Pivot Ball, Not PIN), 1086 (with Axle Pivot Ball, Not PIN), 1466 (Late, with Axle Pivot Ball, Not PIN), 1468 (Late, with Axle Pivot Ball, Not PIN), 1486 (with Axle Pivot Ball, Not PIN), 1566 (Late, with Axle Pivot Ball, Not PIN), 1568 (Late, with Axle Pivot Ball, Not PIN), 3088 (Early, with Round Tube Axle), 3288 (Early, with Round Tube Axle), 3488 (Early, with Round Tube Axle), 3688 (Early, with Round Tube Axle), 5088 (Early, with Round Tube Axle), 5288 (Early, with Round Tube Axle), 5488 (Early, with Round Tube Axle) Replaces International OEM number 50291006 Kit Contains: (1) Cylinder End, (2) Trunion, (2) Bushing, (2) Trunion Bolt, (2) Bushing, (1) Yoke Pin, (2) Inner Tie Rod, (2) Outer Tie Rod, (2) Axle Pivot Bushing, (1) Bolster Pin, (1) Ball Stud, (2) Thrust Bearing, (2) Felt Washer, (!) Retaining Pivot Pin\ 3 PKG (Item #: 173392) $440.00

No
Picture
Farmall Front Axle Overhaul Kit - For International \ Farmall tractor models Hydro 100 (with block type PS cylinder end), 766 (with block type PS cylinder end), 966 (with block type PS cylinder end), 1066 (with block type PS cylinder end), 1466 (with block type PS cylinder end), 1468 (with block type PS cylinder end), 1566 (with block type PS cylinder end), 1568 (with block type PS cylinder end) Replaces International OEM number 50291004, 71820C91, 533287R2, 223314, 531237R1, 533283R1, 531238R1, 71788C1, 531239R1, 358958R1, 71785TLS, 384006R92, 359984R93, 531242R1, 531240R1, 39-5698, 65320C3, 185106C1 Kit Contains: (1 of each) 533287R2 cylinder end, 531239R1 yoke pin, 531240R1 bolster pin, 65320C3 ball stud, 39-5698 retaining pivot pin (3 per package), 223314-CP tapered cylinder pin, HD1NFNJNUT nylon jam nut (1”-14), HD1NFNUT hex nut (1”-14) Kit Contains: (2 of each) 531237R1 trunion, 533283R1 bushing, 531238R1 trunion bolt, 71788C1-BP bushing, 384006R92 inner tie rod, 359984R93 outer tie rod, 531242R1 axle pivot bushing, 185106C1 thrust bearing, 15943DA felt washer Kit Contains: (3 of each) HD1X10NRMB machine bushing (1”, 10 GA.) (Item #: 173397) $421.00

No
Picture
Farmall Rear Axle Shaft, Used - For International tractor models 1566, 1568, 1586Replaces International OEM nos 67224C11Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434823) $325.01

No
Picture
Farmall Front Axle Trunnion, Used - For International tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1468, 1486, 1566, 1568, 3488, 3688, 5088Replaces International OEM number 531237R1Note - 66 SERIES (W\BLOCK TYPE PS CYL END (LATE 66 W\AXLE PIVOT BALL))Note - 86 SERIES (W\ AXLE PIVOT BALL, NOT PIN)Note - 88 SERIES (EARLY W\ AXLE PIVOT BALL, NOT PIN)For a new version of this item use Item #: 109440Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435436) $9.51

No
Picture
Farmall Axle Carrier, Used - For International tractor models M, MD, Super M, Super MTA, 300, 350, 400, 450, 560Replaces International OEM nos 6727DBXAReplaces International Casting nos 6727DBExcept HI-Clearance ModelsUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 444996) $46.01

$photo of <UL><li>For International tractor models Hydro 186, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1486, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, 6788, 21026<\li><li>Replaces International OEM nos 530033R2<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Rear Axle Cap, Used - For International tractor models Hydro 186, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1486, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, 6788, 21026Replaces International OEM nos 530033R2Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 497623) $80.01

$photo of <UL><li>For International tractor models 1086, 1456, 1466, 1468, 1486, 4386 (s\n 1501-later), 4568, 4586, 4786, 21456<\li><li>Replaces International OEM nos 528716R1<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Axle Housing End Cap, Used - For International tractor models 1086, 1456, 1466, 1468, 1486, 4386 (s\n 1501-later), 4568, 4586, 4786, 21456Replaces International OEM nos 528716R1Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 499552) $128.01

$photo of <UL><li>For International tractor models 1566, 1568, 1586, 4786<\li><li>Replaces International OEM nos 67218C1<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Rear Axle Carrier Cap, Used - For International tractor models 1566, 1568, 1586, 4786Replaces International OEM nos 67218C1Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 432269) $55.01

$photo of <UL><li>For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256<\li><li>Replaces International OEM nos 350556R1<\li><li>Front Axle Clamp<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256Replaces International OEM nos 350556R1Front Axle ClampUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434540) $31.01

$photo of <UL><li>For International tractor models Hydro 100, 1066, 3788, 4366, 4386 (s\n 1500-earlier), 6788<\li><li>Replaces International OEM nos 536471R1, 536471R2<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Rear Axle End Cap, Used - For International tractor models Hydro 100, 1066, 3788, 4366, 4386 (s\n 1500-earlier), 6788Replaces International OEM nos 536471R1, 536471R2Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 499551) $147.01

No
Picture
Farmall Rear Axle Carrier Adapter Housing, Used - For International tractor models 1566, 1568, 1586, 4786Replaces International OEM nos 67215C21Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434325) $550.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy