FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Farmall Tractor Drawbar

Click here to see parts by model

$photo of For tractor models H, Super H. Drawbar. Dimensions: 3\4 inch thick, 50-1\2 inches center to center.$
Farmall Drawbar - For tractor models H, Super H. Drawbar. Dimensions: 3\4 inch thick, 50-1\2 inches center to center. (Item #: 110927, Ref. 357530R1) $212.00

$photo of For tractor models M, MD, Super M, Super MD. Swinging Drawbar. Dimensions: 1 inch thick, 52-1\4 inches center to center.$
Farmall Swinging Drawbar - For tractor models M, MD, Super M, Super MD. Swinging Drawbar. Dimensions: 1 inch thick, 52-1\4 inches center to center. (Item #: 111395, Ref. 357529R1) $200.00

Farmall Drawbar - Drawbar for tractor models 235, 240. 28 inches long, 1.25 inches thick, 2 inches wide, 25.5 inches center-to-center on holes. (Item #: 165137, Ref. VPL4434) $66.00

Farmall Swinging Drawbar Pin - For tractor models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Item #: 109900, Ref. FOH450) $54.00

$photo of For tractor models H, Super H. This drawbar is bare steel. The drawbar measures 53-1\4 inches overall length. This drawbar is 3\4 inch thick and 2-1\4 inches wide. There is an oval hole in the end where the pin goes thru like the original straight swinging drawbar. Replaces 49206DA.$
Farmall Swinging Drawbar - For tractor models H, Super H. This drawbar is bare steel. The drawbar measures 53-1\4 inches overall length. This drawbar is 3\4 inch thick and 2-1\4 inches wide. There is an oval hole in the end where the pin goes thru like the original straight swinging drawbar. Replaces 49206DA. (Item #: 110927, Ref. 49206DA) $212.00

No
Picture
Farmall Fixed Drawbar - For tractor models H (from serial number 36680), Super H. (Item #: R4219) $393.86

Farmall Drawbar Roller - For tractor models H, Super H, M, Super M, 300, 330. Replace 356563R93 (Item #: 111251, Ref. R0910) $64.00

Farmall Drawbar Strap - For tractor models H, Super H, M, Super M, 300, 350. (Item #: 110900, Ref. 45184DA) $76.00

Farmall Drawbar Pin, Front - For tractor models with swinging drawbar, 400, 450, 560, 660, M, MD, Super M, Super MD. (Item #: 112536, Ref. 58657DA) $18.15

$photo of For CAT I drawbars only (drawbars that are 1 inch thick x 2-1\2 inch width) . Prevents drawbar from rotating.$
Farmall Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1\2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref. 49A29) $26.10

Farmall Drawbar Support Casting - Fits fast hitch tractors. For tractor models 1026, 706, 756, 766, 806, 826, 856, 966. (Item #: 110287, Ref. 389064R1) $189.00

Farmall Drawbar Support Casting - Used with 2 piece drawbar, 1 inch x 3.5 inch x 16.5 inch. For tractor models 1026, 1206, 706, 756, 766, 806, 826, 856, 966. (Item #: 108541, Ref. 539749R1) $382.00

Farmall Drawbar Support Casting - Used with 1 piece drawbar. For tractor models 1026, 706, 756, 766, 826, 856, 966, Hydro 86. Replaces 72392C1. 10.250 inches high. Plate 1 inch x 3.5 inch x 16.5 inch. (Item #: 109485, Ref. 383385R3) $278.00

Farmall Drawbar Support, Front - For tractor models 1026, 21026, 2706, 2756, 2826, 2856, 706, 756, 826, 856, (766 SN# up to 13892), (966 SN# up to 27089), 806, 2806. (Item #: 172677, Ref. 381707R21) $297.00

Farmall Drawbar - 1 piece, 45.750 inches long, 2.50 inches wide, 1.50 inches high, (2) 1.165 inch diameter holes at 1.500 inches and 10.500 inches from front. Note: This bar can replace 2 piece assembly (397065R1 bar and 393501R11 tube. For tractor models 1026, 706, 756, 806, 826, 856, (766 serial number up to 13892), (966 serial number up to 270896). (Item #: 109486, Ref. 381706R2) $129.00

Farmall Drawbar Bracket - Left hand drawbar bracket for the Cub. 3673 (Item #: 151984, Ref. 350964R11) $26.30

Farmall Drawbar Bracket - Right hand drawbar bracket for the Cub. 3674 (Item #: 151985, Ref. 350965R11) $31.00

Farmall Pin, Front Drawbar - 1 pin diameter, 2.50 usable length, 3.120 overall length, 1.50 head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref. 439-51644) $4.98

$photo of For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating.$
Farmall Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref. DBL2) $33.30

Farmall Drawbar - Fits Farmall A only. Replaces: 43525DAXA (Item #: 126334, Ref. 43525DAXA) $279.30

$photo of Universal Category I Drawbar Measures: (A) 1-7\64 inches thick, (B) 2-3\8 inches wide, (C) 20-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 2-1\32 inches from body edge to center of first body hole, (F) 3-3\32 inch center to center between holes, (G) 7\8 inch end pin, (H) Five 25\32 inch holes.$
Farmall Drawbar, Universal Cat I, 20-1\2 Inch - Universal Category I Drawbar Measures: (A) 1-7\64 inches thick, (B) 2-3\8 inches wide, (C) 20-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 2-1\32 inches from body edge to center of first body hole, (F) 3-3\32 inch center to center between holes, (G) 7\8 inch end pin, (H) Five 25\32 inch holes. (Item #: 179615, Ref. S.49123) $60.00

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 25-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-29\64 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Seven 25\32 inch holes.$
Farmall Drawbar, Universal Cat I, 25-1\2 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 25-1\2 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-29\64 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Seven 25\32 inch holes. (Item #: 178799, Ref. S5009) $40.40

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 29-3\4 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-1\2 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Nine 25\32 inch holes.$
Farmall Drawbar, Universal Cat I, 29-3\4 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 29-3\4 inches center to center on lower link pins, (D) 1-15\16 inches from center of pin to edge of body, (E) 4-1\2 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Nine 25\32 inch holes. (Item #: 178800, Ref. S128196) $48.80

$photo of Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-1\8 inches center to center on lower link pins, (D) 2-1\16 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Eleven 25\32 inch holes.$
Farmall Drawbar, Universal Cat I, 30-1\8 Inch - Universal Category I Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-1\8 inches center to center on lower link pins, (D) 2-1\16 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 7\8 inch end pin, (H) Eleven 25\32 inch holes. (Item #: 103174, Ref. S125) $44.30

$photo of Universal Category II Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 25\32 inch holes.$
Farmall Drawbar, Universal Cat II, 30-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-3\16 inches thick, (B) 2-3\8 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 2-3\8 inches from body edge to center of first body hole, (F) 2-1\8 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 25\32 inch holes. (Item #: 103176, Ref. S126) $58.00

$photo of Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 36-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3-7\8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Thirteen 3\4 inch holes.$
Farmall Drawbar, Universal Cat II, 36-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 36-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3-7\8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Thirteen 3\4 inch holes. (Item #: 103177, Ref. S60156) $71.00

$photo of Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 3\4 inch holes.$
Farmall Drawbar, Universal Cat II, 30-3\4 Inch - Universal Category II Drawbar Measures: (A) 1-1\4 inches thick, (B) 3 inches wide, (C) 30-3\4 inches center to center on lower link pins, (D) 2-3\8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1\8 inch end pin, (H) Eleven 3\4 inch holes. (Item #: 103176, Ref. S60155) $58.00

Farmall Drawbar Stop Block - Used on the following models with one piece swinging drawbars: Hydro 100, Hydro 186, 766 serial number 13893 and above, 786, 886, 966 serial number 27090 and above, 986, 1066 serial number 45052 and above, 1086, 1466 serial number 24403 and above, 1468 serial number 10084 and above, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788. Replaces International part number 108507C1 (Item #: 153256, Ref. 108507C1) $21.70

Farmall Drawbar Stop Block - For the following tractors with 2 piece Swinging Drawbars: 1066 serial number 45051 and before, 1466 serial number 24402 and before, 1468 serial number 7114 and before, 1566 serial number 7114 and before, 1568 serial number 7205 and before. Two are used per tractor. Sold individually. Replaces 65300C1 (Item #: 165197, Ref. 65300C1) $33.60

Farmall Drawbar - Used on International tractor models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, this swinging drawbar measures 56 inches long, 2.750 inches wide, and 1.5 inches thick. It has one 1.385 inch diameter hole 1.50 inch from the front. Replaces part numbers 103502C1, 108502C1, 72476C1, 223351. (Item #: 108762, Ref. 223351) $199.00

Farmall Drawbar - Measuring 58.125 inches long, 2.750 inches wide and 1.500 inches thick, this swinging drawbar has one 1.390 inch diameter hole 1.875 inches from the front. It is used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1566, 1586. Replaces 223352, 108504C1, 72571C1 (Item #: 110123, Ref. 223352) $326.00

Farmall Drawbar - Used on International tractors (1206, 1256, 1456 all serial number 13892 and up), 966 serial number 270896 and up, 1066, 1206, 1466, 1468, 1566, 1568. Replaces: 397066R1, 397066R2. This swinging drawbar is 38.75 inches Long, 2.5 inches Wide, and 1.5 Thick. It has 1.040 inch diameter holes 22.500 inches and 28.000 inches from front of bar. (Item #: 108539, Ref. 397066R1) $135.00

$photo of The measurements on the swinging drawbar with hammerstrap holes are: Length: 62.250 inches, Width: 3 inches, Height: 1-1\2 inches. It has three 1.390 inch diameter holes located 1.750 inches, 5.937 inches and 15.312 inches from the front. Used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586.$
Farmall Drawbar with Hammer Strap Holes - The measurements on the swinging drawbar with hammerstrap holes are: Length: 62.250 inches, Width: 3 inches, Height: 1-1\2 inches. It has three 1.390 inch diameter holes located 1.750 inches, 5.937 inches and 15.312 inches from the front. Used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586. (Item #: 110328, Ref. 223353) $249.72

Farmall Drawbar - Used on International 1066, this drawbar is 1.500 inches thick, 38.750 inches long, and 2.500 inches wide. It has 1.145 inch diameter hole 1.5 inches from end, .687 inches diameter hole 5.51 inches from end, 0.656 inch diameter hole 6.92 inches from end, 1.031 inches diameter hole 14.12 inches from end. (Item #: 111827, Ref. 535799R1) $175.00

Farmall Drawbar Hammerstrap - Used on International models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, this Drawbar Hammer strap replaces 108506C1, 108511C91. If a new space is needed, order part numbers 483858R1 (Item #: 110224, Ref. 108506C1) $86.00

Farmall Drawbar Pin, Front - Check the size of the pin before ordering. Many models listed use more than one size. This pin measures 1.375 inches in diameter and is 4.965 inches long. Used on International models: 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788. Replaces OEM number 108505C1 (Item #: 112538, Ref. 108505C1) $12.60

$photo of Measure before ordering as many models listed used more than one pin. This headed pin measures 1 inch in diameter by 3-3\4 inches long. It is used on International models 1026, 1206, 1256, 1456, 756, 806, 826, 856, 1066, 1466, 1468, 1566, 1568, 766, 966. This pin is used with 393501R11 front tube as well as other applications.$
Farmall Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 1 inch in diameter by 3-3\4 inches long. It is used on International models 1026, 1206, 1256, 1456, 756, 806, 826, 856, 1066, 1466, 1468, 1566, 1568, 766, 966. This pin is used with 393501R11 front tube as well as other applications. (Item #: 160776, Ref. 389428R1) $25.30

Farmall Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref. 57654D) $15.80

$photo of Used on the following Farmall \ International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D$
Farmall Drawbar Pin Retainer Plate - Used on the following Farmall \ International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref. 49139D) $7.50

$photo of Used on tractors with Three Point Hitches, this part measures 1 inch X 3-1\2 inches X 16.00 inches. It is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. Replaces 389360R1.$
Farmall Drawbar Support Casting - Used on tractors with Three Point Hitches, this part measures 1 inch X 3-1\2 inches X 16.00 inches. It is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. Replaces 389360R1. (Item #: 108818, Ref. 389360R1) $402.00

$photo of Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686 this drawbar measures 26-1\4 inches long, 2-1\2 inches wide and 1-1\2 inches thick. It has 1.040 inch diameter holes at 6.390 inches and 8.390 inches from the front. Replaces 389099R1$
Farmall Stub Drawbar - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686 this drawbar measures 26-1\4 inches long, 2-1\2 inches wide and 1-1\2 inches thick. It has 1.040 inch diameter holes at 6.390 inches and 8.390 inches from the front. Replaces 389099R1 (Item #: 110316, Ref. 389099R1) $144.00

Farmall Drawbar Support Plate - Used with 2 point Fast Hitches with Swinging Drawbars, this part Replaces 389065R1 on 706, 756, 766, 806, 826, 856, 966, 1026, 1206 (Item #: 173026, Ref. 389065R1) $83.00

Farmall Drawbar Support Plate - Used with one piece and heavy duty drawbars on International models 706, 756, 766, 806, 826, 966, 1026, 1206. (Item #: 111205, Ref. 400714R1) $129.00

No
Picture
Farmall Stub Drawbar - For International \ Farmall tractor models 706 (s\n 19250-later w\3 point), 756 (s\n 13892-earlier), 766 (s\n 13892-earlier), 806 (s\n 14500 - 23000 w\3 point), 826 (s\n 13892-earlier), 966 (s\n 270896-earlier), 1026 (s\n 13892-earlier) Replaces International OEM number 397065R1 Length: 26.250 Width: 2-1\2 Height: 1-1\2 (Item #: 108542) $83.00

No
Picture
Farmall Drawbar Tube - For International \ Farmall tractor models 706 (s\n 19250-later and with 3 Point), 756 (s\n 13892-earlier), 766 (s\n 13892-earlier), 806 (s\n 14500-23000 and with 3 point), 826 (s\n 13892-earlier), 856 (s\n 21116-later and with 2 Point and 3 Point), 966 (s\n 270896-earlier), 1026 (s\n 13892-earlier) Replaces International OEM number 393501R11 Length: 34.875 (Item #: 108793) $326.00

$photo of <UL> <li>For International \ Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026<\li> <li>Replaces International OEM number 368514R1<\li> <\UL>$
Farmall Drawbar Hammerstrap Spacer - For International \ Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026 Replaces International OEM number 368514R1 (Item #: 110041) $12.20

$photo of <UL> <li>For International \ Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026<\li> <li>Replaces International OEM number 400297R1<\li> <li>Pin hole is 5-1\2 from bend in strap<\li> <li>For use with spacer 368514R1 (110041)<\li> <\UL>$
Farmall Drawbar Hammerstrap - For International \ Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026 Replaces International OEM number 400297R1 Pin hole is 5-1\2 from bend in strap For use with spacer 368514R1 (110041) (Item #: 110042) $193.00

$photo of <UL> <li>For International \ Farmall tractor models 756, 766, 856, 966, 2756, 2856<\li> <li>Replaces International OEM number 65301C1<\li> <li>For tractors with two piece swinging drawbar<\li> <\UL>$
Farmall Drawbar Stop Block - For International \ Farmall tractor models 756, 766, 856, 966, 2756, 2856 Replaces International OEM number 65301C1 For tractors with two piece swinging drawbar (Item #: 111299) $29.40

No
Picture
Farmall Drawbar - For International \ Farmall tractor models 5288, 5488, 7288, 7488 Replaces International OEM number 142616C2 60.5 Long 3 Wide 1.5 Thick (Item #: 115525) $241.00

No
Picture
Farmall Drawbar - Offset - For International \ Farmall tractor models 354, 364, 384, 424, 444 Compatible with International Construction and industrial models 2300A Replaces International OEM number 3111194R1 Length: 35.75 Width: 2.375 Height: 1.187 Offset: 2.125 1.180 hole diameter 1.312 from the front (Item #: 121688) $180.00

No
Picture
Farmall Drawbar - For International \ Farmall tractor models 385, 484, 485 Replaces International OEM number 3116100R2, 406467R2 Length: 38 Width: 2 Height: 1.187 (Item #: 124620) $170.00

$photo of <UL> <li>For International \ Farmall tractor models 300, 330, 340, 350, 460<\li> <li>Replaces International OEM number 360632R1<\li> <li>Width: 2-1\4 <\li> <li>Thickness: 1 <\li> <li>Additional Handling and Oversize Fees Apply To This Item<\li> <\UL>$
Farmall Drawbar - For International \ Farmall tractor models 300, 330, 340, 350, 460 Replaces International OEM number 360632R1 Width: 2-1\4 Thickness: 1 Additional Handling and Oversize Fees Apply To This Item (Item #: 125619) $221.58

$photo of <UL> <li>For International \ Farmall tractor models H (s\n 36680-later), M (s\n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666<\li> <li>Replaces International OEM number 57233DA<\li> <li>Forged<\li> <li>17-1\4 C.C. hole<\li> <\UL>$
Farmall Drawbar Brace Rod - For International \ Farmall tractor models H (s\n 36680-later), M (s\n 21091-later), Super H, Super M, 300, 340, 350, 400, 450, 460, 544, 656, 664, 666 Replaces International OEM number 57233DA Forged 17-1\4 C.C. hole (Item #: 126337) $65.00

$photo of <UL> <li>For International \ Farmall tractor models H (s\n 501-36679), M (s\n 501-21090), MD<\li> <li>Replaces International OEM number 41119D<\li> <li>Forged<\li> <li>18-1\2 C.C. hole<\li> <\UL>$
Farmall Drawbar Brace Rod - For International \ Farmall tractor models H (s\n 501-36679), M (s\n 501-21090), MD Replaces International OEM number 41119D Forged 18-1\2 C.C. hole (Item #: 126338) $70.00

$photo of <UL> <li>For International \ Farmall tractor model M<\li> <li>Replaces International OEM number 49200DB<\li> <li>3\4 -2-1\2 <\li> <li>Additional Handling and Oversize Fees Apply To This Item<\li> <\UL>$
Farmall Straight Swinging Drawbar - For International \ Farmall tractor model M Replaces International OEM number 49200DB 3\4 -2-1\2 Additional Handling and Oversize Fees Apply To This Item (Item #: 126733) $221.58

$photo of <UL> <li>For International \ Farmall tractor models H, HV, M, MD, MTA, Super H, Super HV, Super M, Super MTA<\li> <li>Replaces International OEM number 356653R91<\li> <\UL>$
Farmall Swinging Drawbar Roller Shaft Support - For International \ Farmall tractor models H, HV, M, MD, MTA, Super H, Super HV, Super M, Super MTA Replaces International OEM number 356653R91 (Item #: 126738) $63.00

No
Picture
Farmall Drawbar - Rear, Curved - For International \ Farmall tractor model 5088 Replaces International OEM number 142617C4 Length: 58.500 Width: 3.00 Thickness: 1.500 Offset: 2.250 (Item #: 128546) $238.00

$photo of <UL> <li>For International \ Farmall tractor models 504, 544, 606<\li> <li>Compatible with International Construction and industrial models 2504<\li> <li>Replaces International OEM number 375986R1<\li> <li>Length: 48.38 <\li> <li>Thickness: 1.250 <\li> <li>Width: 2.250 <\li> <\UL>$
Farmall Swinging Drawbar - For International \ Farmall tractor models 504, 544, 606 Compatible with International Construction and industrial models 2504 Replaces International OEM number 375986R1 Length: 48.38 Thickness: 1.250 Width: 2.250 (Item #: 167318) $198.00

$photo of <UL> <li>For International \ Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686<\li> <li>Replaces International OEM number 389100R11<\li> <li>Tube length: 25.50 <\li> <\UL>$
Farmall Drawbar, Front Tube - For International \ Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686 Replaces International OEM number 389100R11 Tube length: 25.50 (Item #: 170028) $258.00

$photo of <UL><li>For International tractor model 5088<\li><li>Replaces International OEM number 142617C4<\li><li>Length: 58.500 <\li><li>Width: 3.00 <\li><li>Thickness: 1.500 <\li><li>Offset: 2.250 <\li><li>For a new version of this item use Item #: 128546<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Drawbar, Used - For International tractor model 5088Replaces International OEM number 142617C4Length: 58.500 Width: 3.00 Thickness: 1.500 Offset: 2.250 For a new version of this item use Item #: 128546Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 428546) $170.01

No
Picture
Farmall Drawbar Support Plate, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2826, 2856, 21026Replaces International OEM number 400714R1Use with 1 piece or heavy duty drawbarFor a new version of this item use Item #: 111205Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435531) $64.01

No
Picture
Farmall Front Drawbar Pin, Used - For International tractor models 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788Replaces International OEM number 108505C14.965 Long1.375 DiameterCheck size before orderingFor a new version of this item use Item #: 112538Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435597) $10.01

$photo of <UL><li>For International tractor models 1066, 1206, 1256, 1456, 1466, 1468, 1566 (s\n 7114-earlier), 1568 (s\n 7205-earlier), 21206, 21256, 21456<\li><li>Replaces International OEM nos 393776R1<\li><li>Additional Handling and Oversize Fees Apply To This Item<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Drawbar Support, Used - For International tractor models 1066, 1206, 1256, 1456, 1466, 1468, 1566 (s\n 7114-earlier), 1568 (s\n 7205-earlier), 21206, 21256, 21456Replaces International OEM nos 393776R1Additional Handling and Oversize Fees Apply To This ItemUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 499578) $234.01

No
Picture
Farmall Rear Drawbar Support, Used - For International tractor models 544, 656, 666, 2544, 2656Replaces International OEM nos 391101R1For Fast Hitch TractorsUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 496573) $204.01

$photo of <UL><li>For International tractor models 1086 (s\n 15070-later), 1486 (s\n 9880-later), 1586, 3388, 3588 (s\n 8912-later with 1 3\8 PTO), 3788 (with 1 3\8 PTO)<\li><li>Replaces International OEM nos 72812C1<\li><li>Additional Handling and Oversize Fees Apply To This Item<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Drawbar Support, Used - For International tractor models 1086 (s\n 15070-later), 1486 (s\n 9880-later), 1586, 3388, 3588 (s\n 8912-later with 1 3\8 PTO), 3788 (with 1 3\8 PTO)Replaces International OEM nos 72812C1Additional Handling and Oversize Fees Apply To This ItemUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 499559) $150.01

$photo of <UL><li>For International tractor models Hydro 86, 706, 756, 766, 806, 826, 856, 966, 1026<\li><li>Replaces International OEM number 72392C1, 383385R3<\li><li>Only for applications with 1 piece drawbars<\li><li>For a new version of this item use Item #: 109485<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Rear Drawbar Support, Used - For International tractor models Hydro 86, 706, 756, 766, 806, 826, 856, 966, 1026Replaces International OEM number 72392C1, 383385R3Only for applications with 1 piece drawbarsFor a new version of this item use Item #: 109485Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 409485) $155.01

$photo of <UL><li>For International tractor models Hydro 186 (s\n 9159-later), 786, 886 (s\n 10844-later), 986 (s\n 12884-later), 1086 (s\n 18933-later), 1486 (s\n 11410-later), 1586 (s\n 16506-later), 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788<\li><li>Replaces International OEM nos 72475C1<\li><li>Marked 73158C1<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Front Drawbar Support, Used - For International tractor models Hydro 186 (s\n 9159-later), 786, 886 (s\n 10844-later), 986 (s\n 12884-later), 1086 (s\n 18933-later), 1486 (s\n 11410-later), 1586 (s\n 16506-later), 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788Replaces International OEM nos 72475C1Marked 73158C1Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 497209) $167.01

$photo of <UL><li>For International tractor models 1066, 1086 (s\n 15069-earlier), 1466, 1486 (s\n 9879-earlier), 1566 (s\n 7115-later), 1568 (s\n 7206-later), 3588 (s\n 8911-earlier with 1 3\8 PTO), 3788 (with 1 3\4 PTO)<\li><li>Replaces International OEM nos 108500C1<\li><li>Additional Handling and Oversize Fees Apply To This Item<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Farmall Drawbar Support, Used - For International tractor models 1066, 1086 (s\n 15069-earlier), 1466, 1486 (s\n 9879-earlier), 1566 (s\n 7115-later), 1568 (s\n 7206-later), 3588 (s\n 8911-earlier with 1 3\8 PTO), 3788 (with 1 3\4 PTO)Replaces International OEM nos 108500C1Additional Handling and Oversize Fees Apply To This ItemUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 499560) $250.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy