FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 8N, 9N, 2N Tractor Gear

Click here to see parts by model

Ford Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref. 8N3581B) $1.30

Ford Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-1964), 8N (1948-1952). 17 teeth. (Item #: 112154, Ref. B9NN7114A) $92.00

Ford Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref. B9NN7A381B) $145.00

Ford Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 beveled teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Item #: 110232, Ref. 9N6384) $26.60

Ford Timing Gear, Camshaft - This Bolt-on type Aluminum Camshafts fits 8N, 9N, 2N thru 1952. (Item #: 121560, Ref. 7RA6256) $89.00

Ford Timing Gear, Crankshaft - This Crankshaft Timing Gear replaces original part numbers: 48-6306, 48-6306A, 486306A . For tractor models 8N, 9N, 2N. 22 teeth. (Item #: 121562, Ref. 486306A) $50.00

Ford Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Item #: B9NN7A381B-set) $193.00

$photo of This gear shift boot has a bottom hole that is 7\8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277.$
Ford Gear Shift Boot - This gear shift boot has a bottom hole that is 7\8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Item #: 108079, Ref. C5NN7277C) $3.30

Ford Steering Gear Set - Fits 9N and 2N tractors 1939-47. Set contains one each of 9N3525 Shaft and pinion assembly, 9N3526 steering sector, right hand, and 9N3527 steering sector, left hand. (Item #: 183791, Ref. SGS3) $345.00

Ford Steering Sector Gear Bushing - For tractor models 9N, 2N. Priced per package of two halves. Order 2 packages for complete tractor. (Item #: 112961, Ref. 9N3517) $27.90

Ford Steering Sector Gear (RH) - For tractor models 9N, 2N. (Item #: 108525, Ref. 9N3526) $155.00

Ford Steering Sector Gear (LH) - For tractor models 9N, 2N. (Item #: 108526, Ref. 9N3527) $158.00

No
Picture
Ford Gear Assembly - Gear-shaft assy. For 8N. (Item #: 172808, Ref. 8N6608A) $18.98

$photo of For 8N, 9N, 2N. Oil pump large gear with 1 1\2 inch shaft for oil pump body number 9N6603.$
Ford Oil Pump Gear - For 8N, 9N, 2N. Oil pump large gear with 1 1\2 inch shaft for oil pump body number 9N6603. (Item #: 172596, Ref. 9N6608A) $35.80

Ford Leveling Box Gear - Gear, Leveling Box Pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA. (Item #: 129284, Ref. B9NN568A) $8.10

Ford Distributor Drive Gear - For tractor models 8N, 9N, 2N. Gear for Distributor Drive On Camshaft (Item #: 163509, Ref. 7RA6255) $22.10

Ford Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Item #: 109957, Ref. 8N7052A) $8.40

$photo of Gear, oil pump driven, width 9\16 inch. For tractor models 8N, 9N, 2N.$
Ford Oil Pump Gear - Gear, oil pump driven, width 9\16 inch. For tractor models 8N, 9N, 2N. (Item #: 179207, Ref. 52-6610B) $63.00

$photo of Gear, oil pump drive, width 9\16 inch. For tractor models 8N, 9N, 2N.$
Ford Oil Pump Gear - Gear, oil pump drive, width 9\16 inch. For tractor models 8N, 9N, 2N. (Item #: 179207, Ref. 52-6614B) $63.00

$photo of Gear, oil pump driven, gear width 3\4 inch. For model 8N.$
Ford Oil Pump Gear, Driven - Gear, oil pump driven, gear width 3\4 inch. For model 8N. (Item #: 179687, Ref. 8N6610) $12.98

$photo of Gear, oil pump drive, gear width 3\4 inch. For model 8N.$
Ford Oil Pump Gear, Drive - Gear, oil pump drive, gear width 3\4 inch. For model 8N. (Item #: 179981, Ref. 8N6614) $127.00

$photo of Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1\2 inches in diameter.$
Ford Gear Shift Boot - Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1\2 inches in diameter. (Item #: 184029, Ref. 8N7277) $5.80

Ford Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Item #: 169927, Ref. 9N7221B) $5.70

$photo of This transmission gear is the 1st gear, in the 4 speed transmission. It is 60\28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee.$
Ford Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60\28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref. 8N7100) $301.00

Ford Steering Gear Assembly - Manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. Does not include arms. Order 86542743. (Item #: 111099, Ref. 8N3505B) $823.37

Ford Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref. 8N7102) $257.00

Ford Gasket, Steering Gear Housing, Rear - For tractor models 9N, 2N 1939-1947. (Item #: 178152, Ref. 9N3593B) $7.08

Ford Gasket, Steering Gear Housing, Front - For tractor models 9N, 2N 1939-1947. (Item #: 178151, Ref. 9N3594) $2.60

$photo of This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5\16 inch UNF thread for the shift knob (knob included). The early series 3\8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA$
Ford Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5\16 inch UNF thread for the shift knob (knob included). The early series 3\8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref. C5NN7202B) $94.32

Ford Gasket, Main Drive Gear Bearing Retainer - For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB. (Item #: 172746, Ref. 9N7086) $1.10

Ford Steering Gear, Pitman Shaft Bushing - For tractor models 8N, NAA 1949-1954. (Item #: 178149, Ref. 8N3553) $10.00

Ford Timing Gear Side Cover Gasket - For tractor models 9N, 8N, 2N. Replaces original part number 8N6018 (Item #: 172754, Ref. 8N6018) $1.20

Ford Timing Gear Front Cover Gasket - For tractor models 9N, 2N, (8N prior to serial number 263844). (Item #: 112059, Ref. 9N6020A) $2.00

Ford Timing Gear Front Cover Gasket - For Model 8N serial number 263844 and up. (Item #: 172635, Ref. 8N6020C) $3.30

Ford Steering Shaft Gear Thrust Bearing Retainer - For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Item #: 124154, Ref. 8N33581) $3.40

Ford Steering Gear, Aftermarket Box - This Double Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Item #: 181987, Ref. S.67671) $128.57

Ford Steering Gear, Aftermarket Box - This Single Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Item #: 184515, Ref. S.67670) $141.42

Ford Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Item #: 179431, Ref. S.67668) $154.01

$photo of 3\8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee.22 required per gear box$
Ford Ball Bearing, Steering Gear - 3\8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee.22 required per gear box (Item #: 167684, Ref. 83424343) $0.50

Ford Gear Shift Lever Spring - This gear shift lever spring fits tractors with a 3 or 4 speed transmission, or 4 speed Torque Converter Transmission, It is 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wide diameter. It is for tractor models 8N, 9N, 2N. (Item #: 155070, Ref. 9N7227B) $11.00

Ford Steering Gear Housing Gasket - For tractor models 9N after serial number 47509 and all 2N. Replaces 9N7223B (Item #: 180733, Ref. 9N7223B) $7.70

Ford Distributor Drive Gear - For 8N with Side Mount Distributor, tractor serial number 263844 and above. (Item #: 186561, Ref. 7RA12390C) $37.30

Ford Camshaft Gear - This Press on type Camshaft Gear is used on Ford Tractors 1939-1942. THIS IS A FIBER GEAR. Replaces 48-6256-A, 486256A. (Item #: 183022, Ref. 48-6256-A) $21.30

$photo of <UL> <li>For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000<\li> <li>Replaces Ford OEM number B9NN7114A, B9NN7A381B<\li> <li>4 Speed Only<\li> <li>2 Piece Set<\li> <\UL>$
Ford 2nd Mainshaft and Countershaft Gears - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 Replaces Ford OEM number B9NN7114A, B9NN7A381B 4 Speed Only 2 Piece Set (Item #: 110911) $163.00

$photo of <UL> <li>For Ford tractor models 2N, 8N, 9N<\li> <li>Replaces Ford OEM number 8N11001, 8N1101R, 8N11002, 9N11001, 9N11002, 10461663<\li> <\UL>$
Ford Starter, Gear Reduction - For Ford tractor models 2N, 8N, 9N Replaces Ford OEM number 8N11001, 8N1101R, 8N11002, 9N11001, 9N11002, 10461663 (Item #: 167399) $220.00

No
Picture
Ford 2nd Speed Mainshaft Gear, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2120, 2130, 2131, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 7530Compatible with Ford Construction and industrial models 2030, 3550, 4040Replaces Ford OEM number B9NN7A381BReplaces Ford Casting nos 8N7101B, 8N7114BTeeth: 56Splines: 173 and 4 Cylinder Tractors with 4 Speed TransmissionFor a new version of this item use Item #: 108536Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435402) $72.01

No
Picture
Ford Steering Sector Gear - Right Hand, Used - For Ford tractor models 2N, 9NReplaces Ford OEM number 9N3526This is for the right-hand sideFor a new version of this item use Item #: 108525Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 435400) $92.01

$photo of <UL><li>For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131<\li><li>Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140<\li><li>Replaces Ford OEM nos 8N7110<\li><li>4th Gear<\li><li>Teeth: 39<\li><li>Splines: 17<\li><li>Inside Diameter: 1.783 <\li><li>Outside Diameter: 5.119 <\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Ford Main Shaft Gear, Used - For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140Replaces Ford OEM nos 8N71104th GearTeeth: 39Splines: 17Inside Diameter: 1.783 Outside Diameter: 5.119 Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 436813) $95.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy