FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson Tractor Gear

Click here to see parts by model

Massey Ferguson Flywheel with Ring Gear - This 12 inch Fly Wheel with Ring Gear is used on multiple Massey Fergusons Tractors with 236 or 248 Perkins Engines and 12 Inch Clutches. It replaces original part numbers 41117084, 41112565, 742106M91, 3819666M91. Verify Part Numbers before ordering. For models: 165, 168, 175, 178, 185, 188, 261, 265, 275, 285S 290, 362, 365, 372, 375, 382, 390 with W4.248 with serial number up to B18008, 4225, 4235, 4325, 4335, 550, 565, 575, 590, 675, 690, 265S, 285S, 375E, 390E, 390T, 50E. (Item #: 119280, Ref. 742106M91) $400.00

Massey Ferguson Crankshaft Gear - Crankshaft gear, 24 teeth: TE20, TO20, TO30. Continental Gas Engine. (Item #: 121583, Ref. 1750284M1) $45.10

Massey Ferguson Crankshaft Gear - Crankshaft Gear, 24 teeth. For tractor models TO35, 35, MH50, 50, 135, 150. Continental Gas Engine. (Item #: 121584, Ref. 1750054M1) $55.00

Massey Ferguson Camshaft Gear - Camshaft gear, 48 teeth, Continental Gas Engine in models: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135, 150; Industrials: 202, 204, 2135. Replaces: 1046676M1, 1750237M1. (Item #: 121582, Ref. 1750237M1) $104.00

$photo of Shaft, steering gear: TE20, TO20, TO30. 13 1\2 inches long. NOTE: If the bearings for this shaft are needed please order part numbers: 5BC-TIM (Bearing), 6-TIM (Outer Race), 4CB-TIM (Inner Race). Order times two (X2) for a complete bearing set (Upper and Lower) for one tractor. Replaces 181365M1$
Massey Ferguson Steering Shaft and Gear - Shaft, steering gear: TE20, TO20, TO30. 13 1\2 inches long. NOTE: If the bearings for this shaft are needed please order part numbers: 5BC-TIM (Bearing), 6-TIM (Outer Race), 4CB-TIM (Inner Race). Order times two (X2) for a complete bearing set (Upper and Lower) for one tractor. Replaces 181365M1 (Item #: 108524, Ref. 9N3525) $95.00

$photo of For (MF30, MF40, 30, 40) (100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER) (212, 52, 44 ALL BACKHOE) (2200, 2500, 4500, 5400H, 6500, 6500H, 6800 ALL FORKLIFT) (2244, 400C ALL CRAWLER) (100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER) (212, 52, 54 ALL BACKHOE) (2200, 2500, 4500, 6500, 6500H, 6800, 6800H ALL FORKLIFT) (2244, 400C ALL CRAWLER). Hydraulic Gear Pump. Note: Includes adaptor. Ports are located on side of rear housing. CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: left hand, PORT SIZE INLET: 1-5\8 inch -12 ORB, PORT SIZE OUTLET: 1-5\16 inch -12 ORB, MOUNTING: 2 bolt SAE B , CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIA: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: left hand, MOUNTING: 2 bolt SAE B , INLET: 1-5\8 inch -12 ORB, OUTLET: 1-5\16 inch -12 ORB. The 2 bolt mount slots are 9\16 inch and open on the ends. Minimum measurement between the slots are 5 1\4 inches and Maximum is 6 7\8 inches.$
Massey Ferguson Hydraulic Gear Pump - For (MF30, MF40, 30, 40) (100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER) (212, 52, 44 ALL BACKHOE) (2200, 2500, 4500, 5400H, 6500, 6500H, 6800 ALL FORKLIFT) (2244, 400C ALL CRAWLER) (100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER) (212, 52, 54 ALL BACKHOE) (2200, 2500, 4500, 6500, 6500H, 6800, 6800H ALL FORKLIFT) (2244, 400C ALL CRAWLER). Hydraulic Gear Pump. Note: Includes adaptor. Ports are located on side of rear housing. CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: left hand, PORT SIZE INLET: 1-5\8 inch -12 ORB, PORT SIZE OUTLET: 1-5\16 inch -12 ORB, MOUNTING: 2 bolt SAE B , CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIA: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: left hand, MOUNTING: 2 bolt SAE B , INLET: 1-5\8 inch -12 ORB, OUTLET: 1-5\16 inch -12 ORB. The 2 bolt mount slots are 9\16 inch and open on the ends. Minimum measurement between the slots are 5 1\4 inches and Maximum is 6 7\8 inches. (Item #: 127269, Ref. 7702425-29Z) $760.00

Massey Ferguson Steering Gear Assembly - For tractor models 235 UK and 245 UK, both with manual steering. Steering Gear Assembly. (Item #: 161571, Ref. 1673663T91) $862.72

Massey Ferguson Starter Ring Gear - For TE20, TEA20. Starter Ring Gear for 85MM and 87MM Gasoline Engines, 145 teeth. 42422S (Item #: 159157, Ref. 825452M1) $83.00

$photo of This tachometer gear box has a 1\2 inch UNF cable fitting. For tractor models 1080, 165, 168, 175, 178, 185, 188, 265, 275, 285, 290, 298, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Tachometer Gearbox has a 1\2 inch cable inlet fitting.$
Massey Ferguson Tachometer Cable Gearbox - This tachometer gear box has a 1\2 inch UNF cable fitting. For tractor models 1080, 165, 168, 175, 178, 185, 188, 265, 275, 285, 290, 298, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Tachometer Gearbox has a 1\2 inch cable inlet fitting. (Item #: 121518, Ref. 1446059M1) $32.80

Massey Ferguson Power Steering Gear Rack Wear Block Assembly - Assembly contains Plate, Ware Block and 2 Screws. For tractor models 35, TO35, 135, 2135. Power Steering Gear Rack Wear Block Assembly. Also replaces 1751653M1, 751644M1, 1751643M1, 1751644M1. (Item #: 178301, Ref. 1751653M1) $43.40

$photo of This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS\DIESEL, 282 MEX.$
Massey Ferguson Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS\DIESEL, 282 MEX. (Item #: 151828, Ref. 1682688M1) $70.00

Massey Ferguson Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref. 180419M1) $26.10

Massey Ferguson Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref. 1682691M1) $136.00

Massey Ferguson Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref. 180415M1) $18.98

Massey Ferguson Pinion Gear - For 135, 148, 150, 155, 158, 168, 175, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Pinion Gear for 8 speed transmission (28 tooth, 20 splines, 4.350 inch diameter). (Item #: 166038, Ref. 964916M1) $13.98

Massey Ferguson Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref. 183040M1) $74.00

Massey Ferguson PTO Driven Gear - For tractor models 135, 150, 20, 2135, 30, 35, 50, TO35 serial number 169196>. (Item #: 173142, Ref. 182090M1) $156.00

$photo of This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION\MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines.$
Massey Ferguson PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION\MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Item #: 166907, Ref. 1868532M1) $85.00

$photo of For tractor models 135, 150, 155, 158, 175, 180, 20, 202, 203, 240, 2200, 30, 31, 3165, 550, FE135 COVENTRY, 165 STANDARD\MULTI-POWER serial number <-130773, 2135, TURF UTILITY NARROW. This PTO gear is a constant mesh gear with 53 spur teeth and 15 splines. Replaces 899329M1 and 1867820M1.$
Massey Ferguson PTO Gear - For tractor models 135, 150, 155, 158, 175, 180, 20, 202, 203, 240, 2200, 30, 31, 3165, 550, FE135 COVENTRY, 165 STANDARD\MULTI-POWER serial number <-130773, 2135, TURF UTILITY NARROW. This PTO gear is a constant mesh gear with 53 spur teeth and 15 splines. Replaces 899329M1 and 1867820M1. (Item #: 153626, Ref. 1867820M1) $98.00

Massey Ferguson Planetary Gear Shift Lever - For Super 90, 35, 50, 65, 85, 88. Planetary Gear Shift Lever - Dual Range. Replaces 180440M2 (Item #: 165787, Ref. 185804M1) $16.70

$photo of For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5\8 inch, bottom hole 2 inches. Replaces K929631.$
Massey Ferguson Gear Shift Boot - For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5\8 inch, bottom hole 2 inches. Replaces K929631. (Item #: 124263, Ref. 1678565M2) $3.00

Massey Ferguson Ring Gear, Flywheel - For Pony, Pacer, both with N-62 Continental Engine. Flywheel Ring Gear has 86 teeth. (Item #: 100079, Ref. 1500117M1) $70.00

$photo of This ring gear is for models TE20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 175, 180, all with Continental Gas Engine. Flywheel Ring Gear with 145 teeth measures 14.685 outside diameter and 13.680 inside diameter and 1\2 inch thick.$
Massey Ferguson Ring Gear, Flywheel - This ring gear is for models TE20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 175, 180, all with Continental Gas Engine. Flywheel Ring Gear with 145 teeth measures 14.685 outside diameter and 13.680 inside diameter and 1\2 inch thick. (Item #: 101976, Ref. 1750034M1) $45.50

$photo of For tractor models TE20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1\2 inch. Bottom hole 1 1\2 inch. Replaces 180579M4, 180579M3, 108579M3, 520858M1, 237461$
Massey Ferguson Gear Shift Boot - For tractor models TE20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1\2 inch. Bottom hole 1 1\2 inch. Replaces 180579M4, 180579M3, 108579M3, 520858M1, 237461 (Item #: 114031, Ref. 520858M1) $2.90

Massey Ferguson Starter Switch-Gear Stick Operated - For tractor models TE20 with Z120 and TEA20 with 80mm or 85mm Gas Engines. Also replaces OEM number 76418. (Item #: 167862, Ref. 829960M91) $27.20

$photo of Flywheel Ring Gear. For Perkins engine in tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF383, Industrials: 20, 30, 40, 50. 115 teeth, 13-7\16 inch inside diameter. Replaces 410236. For 20, 30, 40, 50, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF383, MF50, MF65.$
Massey Ferguson Flywheel Gear, Perkins Engines - Flywheel Ring Gear. For Perkins engine in tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF383, Industrials: 20, 30, 40, 50. 115 teeth, 13-7\16 inch inside diameter. Replaces 410236. For 20, 30, 40, 50, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF383, MF50, MF65. (Item #: 101977, Ref. 731008M1) $28.20

$photo of Hi-low shift knob, for shift levers with 3\8 inch NF threads. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285.$
Massey Ferguson Gear Shift Knob - Hi-low shift knob, for shift levers with 3\8 inch NF threads. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285. (Item #: 151021, Ref. 1862399M1) $8.20

Massey Ferguson Gear Shift Knob, 6 Speed - 6 speed shift knob. Can replace plain knob and pattern label 1682623M1 and 1682630M1. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF135 UK, MF150, MF165, MF165UK, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 151022, Ref. 1862401M1) $8.30

$photo of This 4-speed shift knob is for a 3\8 fine thread lever. NOTE: may come without the face of the knob being printed in white. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285$
Massey Ferguson Gear Shift Knob - This 4-speed shift knob is for a 3\8 fine thread lever. NOTE: may come without the face of the knob being printed in white. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 154696, Ref. 532959M1) $9.90

Massey Ferguson Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref. 180445M1) $20.87

Massey Ferguson Countershaft Driven Gear - Countershaft Driven Gear, 6 speed trans. 50 tooth, 20 spline. For tractor models 135, 150, 20, 202, 2135, 2200, 230, 235, 245, 35, 50, F40, FE135, MH50, TO35. (Item #: 165905, Ref. 181799M1) $77.15

Massey Ferguson Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref. 180446M1) $17.30

Massey Ferguson Crankshaft Gear - Used on 3-cylinder Perkins A3.152 and AD3.152 engines on: 30, 35, 50, 135, 235, 245. INDUSTRIALS: 20, 40, 202, 2135, 2200. Replace 02139014, 31163411, 31163491, 31163492, 31163493, 31163494, 31163495, 3637518M1, 3641085M1, 3641397M91, 3641826M1, 410132, 731228M1, 735599M1, 81804043, 957E6306 (Item #: 113700, Ref. 731228M1) $40.10

Massey Ferguson Manual Steering Gear and Related Components - The NUMBERED items in picture (click ENLARGE PICTURE) are available for Model FE35. Call to order. (Item #: SPX_FERG_F2_6) $0.00

$photo of 50 tooth, for engine type PE 144 A3.152\AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139$
Massey Ferguson Camshaft Timing Gear - 50 tooth, for engine type PE 144 A3.152\AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139 (Item #: 172327, Ref. 731203M1) $45.01

No
Picture
Massey Ferguson Gear Shift Knob - Round ball, 3\8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref. 180006M91) $4.00

Massey Ferguson Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref. 193181M1) $20.98

Massey Ferguson Crank Gear - For tractor models 165 serial number 2939036-29C1084, 165 serial number 29C1085>, 255 serial number 2939036-29C1084, 255 serial number 29C1085>, 30 serial number 29C1085>, 300 serial number 2939036-29C1084, 300 serial number 29C1085>, 302 serial number 2939036-29C1084, 302 serial number 29C1085>, 304 serial number 2939036-29C1084, 304 serial number 29C1085>, 3165 serial number 2939036-29C1084, 3165 serial number 29C1085>, 356 serial number <2820092, 356 serial number 2820092>, 356 serial number 2939036-29C1084, 356 serial number 29C1085>, 365 serial number <2939035 NOT ENDING with DL, 40B serial number 29C1085>, 50 serial number 29C1085>, 65 serial number <2820092, 65 serial number <2939035 NOT ENDING with DL, 65 serial number 2820092>, 65 serial number 2939036-29C1084, 65 serial number 29C1085>. Replaces 731074V1, 731074M1, 731074M1, 0410228 (Item #: 0410228) $18.01

Massey Ferguson Constant Mesh Transmission Gear - 42 teeth, 20 spline. For tractor models 135 Orchard, 165, 175, 235 Orchard, 245 Orchard, 250, 255, 265, 270, 275, 282, 283, 290 UK. (Item #: 172317, Ref. 1862422M1) $121.00

Massey Ferguson Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Item #: 170397, Ref. 894769M1) $38.98

Massey Ferguson Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Item #: 172350, Ref. 897005M1) $110.00

$photo of 1\2 inch X 1 45\64 inch NF. 6 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 6 items.$
Massey Ferguson Bolt, Ring Gear to Case - 1\2 inch X 1 45\64 inch NF. 6 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 6 items. (Item #: 168810, Ref. 825776M1) $2.10

Massey Ferguson Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Item #: 172320, Ref. 894772M2) $409.00

Massey Ferguson Oil Pump Idler Gear - Replaces 41115025. For tractor models 135, 150, 154-4, 20, 200, 202, 203, 205, 20C, 20D, 20F, 2135, 2244, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 30H, 35, 40, 4500, 4830FC, 50, 5830, 6030FC, 8530FC. Also Replaces 736513M91, 41314078. (Item #: 170489, Ref. 733551M92) $40.50

Massey Ferguson Gear, 4th - 32 teeth, 18 spline, Replaces 1660095M1. For tractor models 1085, 135, 150, 165, 235, 240, 245, 255, 265, 275, 285, 390T. (Item #: 125328, Ref. 1683360M1) $94.00

Massey Ferguson Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 2.92 inch diameter. For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 180, 1800, 1805, 203, 205, 2135, 2200, 2500, 302, 304, 3165, 35, 356, 40, 50, 65, 70, 80, 85, 88, Super 90. (Item #: 173507, Ref. 181275M1) $60.00

Massey Ferguson Crank Gear - 28 teeth. Do NOT use on build number: LE70089, LE22376, LE80173. For tractor models 1007, 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194, 194-4F, 255, 265, 274, 274S, 275, 284S-4S, 285, 290, 294S-4S, 3050, 3065, 3070, 30D, 3370, 362, 365, 373, 375, 377, 383, 387, 390, 393, 397, 398, 50, 50B, 50C, 50D, 50E, 565, 575, 590, 6000, 60H, 675, 690, 698, 698T. All with either A4.121, A4.236 or A4.248 Perkins Engines. Replaces 734749M1, 73479M1, 734749M1. (Item #: 165548, Ref. 31171681) $74.00

Massey Ferguson Ring Gear Nut, Flywheel - This nut is for the ring gear to case. Used with BOLT 825776M1. For models- 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 12 items. (Item #: 173305, Ref. 891947M1) $1.50

$photo of Fits many Massey Harris Models. May not fit your tractor verify size before ordering. 1-3\4 inch bottom inside diameter, 5\8 inch hole diameter. Replaces 13417B.$
Massey Ferguson Gear Shift Boot - Fits many Massey Harris Models. May not fit your tractor verify size before ordering. 1-3\4 inch bottom inside diameter, 5\8 inch hole diameter. Replaces 13417B. (Item #: 107029, Ref. VT2017) $10.00

Massey Ferguson Steering Gear Bracket - Steering gear to flywheel housing adapter plate. For tractor models (150, 165, 255, 30, 3165, 40B all with diesel engine). (Item #: 173264, Ref. 737181M1) $69.00

Massey Ferguson Gear, Timing Idler, Lower - For tractor models (155, 158, 165, 260, 50, 560 all with AD4.203 engine), (65, 765 with A4.192 or AD4.203 engine). Replaces 731797M91, Perkins number 41115004. (Item #: 173097, Ref. 731628M91) $298.00

Massey Ferguson Front Cover To Timing Gear Housing Gasket - Price shown is for each, sold only in multiples of 2 items. For tractor models 165, 1745, 175, 180, 184-4, 220, 24, 25, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 300, 3050, 3060, 3070, 31, 362, 375, 383, 390, 670, 6800H, 6830, 6830C, 6830FC, 6860, 6870, 6880, 690, 7830, 7830C, 7860, 7870, 8530F, 8830, 8860, 8870, 8880. Replaces 36813137. ** Must be ordered in qty of 2, price is for 1. (Item #: 173234, Ref. 734887M1) $21.90

Massey Ferguson Timing Gear Cover Gasket - For tractor models 1100, 1130, 165, 255, 30, 300, 302, 304, 3165, 356, 40B, 50, 50A, 65. Replaces 36813114. Price shown is for each, sold only in multiples of 5 items. (Item #: 168424, Ref. 735848M1) $10.50

Massey Ferguson Camshaft Gear - 56 tooth. For tractor models 1100, 1130, 1745, 180, 184-4, 220, 255, 2640, 2675, 270, 2705, 274-4, 282, 283, 285, 294-4, 30, 300, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 399, 470, 50C, 50D, 50E, 50H, 60, 6500, 670, 699, 80, 850, 860, (165, 168, 175, 178, 185, 188, 265, 275, 290, 565, 575, 590, 690 all with engine A.212, A4.236 or A4.248). Replaces 31171353. (Item #: 172330, Ref. 736254M1) $101.00

Massey Ferguson Camshaft Idler Gear - 90 tooth. For tractor models (135, 148, 150, 154-4, 154-4S, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 245, 250, 2500, 253, 254-4, 30b, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 550 all with A3.152 or AD3.152 gas or diesel engines), 5830, 5830FC, 5860, 5870, 6030FC. Replaces 31164362. (Item #: 172340, Ref. 731205M2) $82.00

Massey Ferguson Gear, Idler - 63 tooth. For tractor models 165, 168, 1745, 175, 178, 180, 184-4, 185, 188, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 31, 50C, 50D, 50E, 50H, 565, 575, 590, 60, 6500, 670, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7880, 8530F, 8830, 8860, 8870, 8880, (675, 690 early models with engine A4.212 or A4.248 engine), 910. Replaces 41115023. (Item #: 167783, Ref. 734738M91) $106.00

Massey Ferguson Ring Gear, Flywheel - This ring gear has 122 teeth and measures 14.312 inch inside diameter. For tractor models Super 90, 1080, 1085, 1100, 1105, 1130, 1135, 285, 298, 698. (Item #: 128505, Ref. 731988M1) $69.00

Massey Ferguson Ring Gear, Flywheel - This ring gear is for model FE35 with 23C engine. (Item #: 159158, Ref. 826049M1) $92.00

Massey Ferguson Gear, Transmission - 45 tooth, 20 spline. For tractor models 175, 270, 275, (240 constant mesh ratio 1.88), (290 Hi-Clearance), (165, 255, 265 Row Crops), (282 serial number up to 3K-D25608H), 20C Turf. (Item #: 172321, Ref. 906469M1) $113.00

Massey Ferguson Gear, 3rd Mainshaft - 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Item #: 165945, Ref. 1682690M1) $43.98

Massey Ferguson Gear, Transmission Pinion, 4th - 32 tooth. For tractor models (1085, 165, 235, 240, 245, 250, 255, 265, 270, 275, 283, 285, 298, 390T all with 8 speed transmission). (Item #: 125329, Ref. 1868010M1) $171.00

Massey Ferguson Gear Shift Knob - For tractor models 135, 135UK, 150, 165, 175, 20, 20E, 282, 30. (Item #: 173121, Ref. 1862400M1) $8.00

Massey Ferguson Gearshift Lever - For tractor models FE35, 135UK, 150, 165, 175, 20D, 230, 235, 245, 255, 265, 275, 285, 30, 30E, 40, 40E, (20F SN# 50101A0192 and up). Replaces 891405M1, 194550M3. (Item #: 123094, Ref. 1673814M2) $42.20

Massey Ferguson Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref. 1860761M1) $26.40

Massey Ferguson Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref. 1860764M3) $4.28

Massey Ferguson Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref. 1862868M2) $35.70

$photo of 54 teeth, 1.723 inches thick. For tractor models 2500, (202, 203, 2135, 2200, 3165, all 6 speed manual shuttle), (135, 165 all 6\8 speed multi power), (150 6\8 speed serial number CB22864 and up multi power), (30 6\8 speed transmission serial number up to CA304 and with manual shuttle transmission serial number up to CB22865).$
Massey Ferguson Planetary Ring Gear - 54 teeth, 1.723 inches thick. For tractor models 2500, (202, 203, 2135, 2200, 3165, all 6 speed manual shuttle), (135, 165 all 6\8 speed multi power), (150 6\8 speed serial number CB22864 and up multi power), (30 6\8 speed transmission serial number up to CA304 and with manual shuttle transmission serial number up to CB22865). (Item #: 172329, Ref. 897021M1) $115.00

$photo of 17 bevel, 39 spline, part 9 in picture. For model FE35 left hand\right hand serial number 383988 and up less differential lock. Replaces 897007M1.$
Massey Ferguson Rear Differential Gear - 17 bevel, 39 spline, part 9 in picture. For model FE35 left hand\right hand serial number 383988 and up less differential lock. Replaces 897007M1. (Item #: 172315, Ref. 897006M1) $58.00

Massey Ferguson Water Pump, Gear Drive - For tractor models (396 with 1006.6 engine), 3120, 3120T, 3140, 8120, 3660. replaces 3641860M91, 3638694M91. (Item #: 116840, Ref. 4222028M91) $123.00

$photo of For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 1\8 inches inside diameter, 1 7\16 inches outside diameter, 1 1\8 inches in length.$
Massey Ferguson Steering Gear Inner Bushing - For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 1\8 inches inside diameter, 1 7\16 inches outside diameter, 1 1\8 inches in length. (Item #: 173163, Ref. 195783M1) $25.60

$photo of For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 5\16 x 1 7\16 x 1 13\64 inches.$
Massey Ferguson Steering Gear Outer Bushing - For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 5\16 x 1 7\16 x 1 13\64 inches. (Item #: 173164, Ref. 180363M1) $30.90

Massey Ferguson Knob, Gear shift - Gear shift knob, chrome. For TE20, TEA20, TEF20. Chrome finish. Measures .430 inch hole inside diameter and 1.298 inch overall length. The knob outside diameter measures 0.975 inch. This knob has a .159 inch roll pin hole. Replaces 180006M91. (Item #: 126528, Ref. S.43765) $14.50

$photo of Inside diameter top = 5\8 inch, inside diameter bottom = 1-11\16 inch, height 4-3\8 inch. For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8\1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. Replaces 1694127M1, 1694127M3, 1694127M4.$
Massey Ferguson Gear Shift Boot - Inside diameter top = 5\8 inch, inside diameter bottom = 1-11\16 inch, height 4-3\8 inch. For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8\1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. Replaces 1694127M1, 1694127M3, 1694127M4. (Item #: 151854, Ref. 1694127M1) $6.10

$photo of 3\8 UNF, engraved R-2-1-3. For tractor models 135, 135UK, 150, 165, 165UK, 175, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 670, 690, 698, 699, Ind. 20, 20C, 30, 31.$
Massey Ferguson Gear Shift Knob, 6 Speed - 3\8 UNF, engraved R-2-1-3. For tractor models 135, 135UK, 150, 165, 165UK, 175, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 670, 690, 698, 699, Ind. 20, 20C, 30, 31. (Item #: 151022, Ref. 1862401M1) $8.30

$photo of This Ring Gear measures 13 3\8 inches inside diameter, 14 5\8 inches outside diameter and has 145 teeth. For model: TEA20 (serial number <200000 with 6 Volt Starter Motor. Replaces VPC4200.$
Massey Ferguson Ring Gear - This Ring Gear measures 13 3\8 inches inside diameter, 14 5\8 inches outside diameter and has 145 teeth. For model: TEA20 (serial number <200000 with 6 Volt Starter Motor. Replaces VPC4200. (Item #: 159156, Ref. 825149M1) $95.00

$photo of This Flywheel Ring Gear has 103 Teeth, a 12-1\8 inside diameter and a 13-1\8 outside diameter. Used on Colt (21), Mustang (23) (Mustang), 101 Jr, 102 Jr, 20, 22, 30, 81, 82 and others with Continental F124, F140 and F162 flathead engines. Replaces original part number 32654A.$
Massey Ferguson Ring Gear, Flywheel - This Flywheel Ring Gear has 103 Teeth, a 12-1\8 inside diameter and a 13-1\8 outside diameter. Used on Colt (21), Mustang (23) (Mustang), 101 Jr, 102 Jr, 20, 22, 30, 81, 82 and others with Continental F124, F140 and F162 flathead engines. Replaces original part number 32654A. (Item #: 126488, Ref. C400C305) $101.78

Massey Ferguson Gear Shift Cup and Lock Ring - This Gear Shift Cup (827690M1) and Lock Ring (827211M1) is used on Massey Ferguson 135, 135 UK, 231, 240, 250, 253, 360, 362, 375, 383, 390, 393, 396, 20D, 20E, 283 UK, 30E, 390T. Replaces 827690M1, 827211M1 (Item #: 173296, Ref. 827690M1) $32.90

Massey Ferguson Flywheel with Ring Gear - This Flywheel with Ring Gear has 115 teeth. It is used on Massey Ferguson 390, 393, 398, 4243, 4245, 4253, 4255, 4265, 4345, 4355. Replaces 3819667M91, 747577M91, 747577M92. (Item #: 159133, Ref. 3819667M91) $336.00

Massey Ferguson Ring Gear, Flywheel - This Ring Gear is used on Massey Ferguson Combine 8450, Industrial 80, Windrower 885, Also used on Perkins A4-236, A6.354.4, T4-236, T6.354-4 engines. It has 126 teeth, 14.815 inch inside diameter, 15.913 inch outside diameter, 0.690 inch width. Replaces 31162121, 730407, 738588M1 (Item #: 162163, Ref. 738588M1) $72.98

Massey Ferguson Differential Brake Gear Shaft Seal - This differential brake gear shaft seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. It Fits: Massey Harris 55 (Sn: 3023 and up). Replaces: 15874X (Item #: 106145, Ref. A57342) $9.60

Massey Ferguson PTO Gear, Constant Mesh - This Constant Mesh Gear has 53 Teeth and 15 Splines. Used on Massey Ferguson 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590. It replaces part number 899329M1 (Item #: 153626, Ref. 899329M1) $98.00

Massey Ferguson Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref. 180582M1) $1.98

Massey Ferguson Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref. 1861024M1) $13.30

Massey Ferguson Camshaft Gear - Has 48 teeth and a 1 inch hub length. It is used on the following Continental Engines: F244, F245, F226, F227, F124, F162, F163, F140. Replaces F400H310, 33177A, 452299A. Used Part - Not New. (Item #: 33177A) $84.95

$photo of The dimensions of this gear in inches are: A - 1 15\16, B - 4 1\2, C - 2 3\4, D - 15\16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5$
Massey Ferguson Differential Gear - The dimensions of this gear in inches are: A - 1 15\16, B - 4 1\2, C - 2 3\4, D - 15\16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref. 885518M1) $71.00

Massey Ferguson Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref. 2746322M1) $25.50

Massey Ferguson Differential Pinion Gear Thrust Washer - Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref. 3387281M1) $1.40

Massey Ferguson Planetary Ring Gear Gasket - Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref. 191141M1) $7.60

Massey Ferguson Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref. 1866542M1) $3.50

Massey Ferguson Pinion Epicyclic Gear - Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref. 897769M1) $38.98

Massey Ferguson Planetary Pinion Gear Shaft - The end of this shaft is threaded with a tapered hole for a Set Screw. It measures 1.03 inches in diameter and is 3.26 inches long. Replace Massey Ferguson part numbers 894799M1. Used on Massey Ferguson models: 135, 150, 165, 175, 178, 180, 30, 31, 3165, 375, 383, 390, 390T, 393, 398, 40, 50 (Item #: 180205, Ref. 894799M1) $17.80

Massey Ferguson Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref. 1864869M1) $23.40

Massey Ferguson Steering Gear Side Cover Gasket - Used on Burman (UK) steering gear assemblies on Massey Ferguson models 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35 (Item #: 168939, Ref. 1850041M1) $4.60

Massey Ferguson Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; TO35, 20, 135, 2135. Replaces 1751676M1 (Item #: 170142, Ref. LA33586A) $52.00

Massey Ferguson Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 21 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 20C, 20E, 230, 235, 240, 240S, 243, 245, 250, 250X Brazilian, 253, 255, 265, 270, 275, 283, 290, 30, 30E, 31, 40B, 451, 50C, 50E. Replace OEM number 1868540M1 (Item #: 187207) $164.00

$photo of <UL> <li>For Massey Ferguson tractor model 240<\li> <li>Compatible with Massey Ferguson Construction and industrial model 20, 30, 40<\li> <li>Replaces Massey Ferguson OEM number 1681761M1<\li> <\UL>$
Massey Ferguson Gearshift Lever - For Massey Ferguson tractor model 240 Compatible with Massey Ferguson Construction and industrial model 20, 30, 40 Replaces Massey Ferguson OEM number 1681761M1 (Item #: 123095) $66.77

$photo of <UL> <li>For Massey Ferguson tractor model 550<\li> <li>Compatible with Massey Ferguson Combine (s) 510<\li> <li>Replaces Massey Ferguson OEM number 530305M1<\li> <li>Teeth 17<\li> <\UL>$
Massey Ferguson Combine First and Reverse Transmission Gear - For Massey Ferguson tractor model 550 Compatible with Massey Ferguson Combine (s) 510 Replaces Massey Ferguson OEM number 530305M1 Teeth 17 (Item #: 126171) $61.00

$photo of <UL> <li>For Massey Ferguson tractor models 360 (with 12 speed syncromesh trans.), 362 (with 12 speed syncromesh trans.), 375 (with 12 speed syncromesh trans.), 390 (with 12 speed syncromesh trans.), 390T (with 12 speed syncromesh trans.), 398 (with 12 speed syncromesh trans.), 399 (with 12 speed syncromesh trans.)<\li> <li>Replaces Massey Ferguson OEM number 1694126M3<\li> <\UL>$
Massey Ferguson Gear Shift Boot - For Massey Ferguson tractor models 360 (with 12 speed syncromesh trans.), 362 (with 12 speed syncromesh trans.), 375 (with 12 speed syncromesh trans.), 390 (with 12 speed syncromesh trans.), 390T (with 12 speed syncromesh trans.), 398 (with 12 speed syncromesh trans.), 399 (with 12 speed syncromesh trans.) Replaces Massey Ferguson OEM number 1694126M3 (Item #: 158902) $1.98

$photo of <UL> <li>For Massey Ferguson tractor models 50, 175, 180, 255, 265, 270, 275, 282, 283, 285, 290, 298, 375, 383, 390, 390T, 393, 398, 399, 670, 690, 698, 699, 1085<\li> <li>Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500<\li> <li>Replaces Massey Ferguson OEM number 1866545M1, 1866545M2<\li> <li>4-1\4 I.D x 1\16 <\li> <\UL>$
Massey Ferguson Ring Gear Washer - For Massey Ferguson tractor models 50, 175, 180, 255, 265, 270, 275, 282, 283, 285, 290, 298, 375, 383, 390, 390T, 393, 398, 399, 670, 690, 698, 699, 1085 Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500 Replaces Massey Ferguson OEM number 1866545M1, 1866545M2 4-1\4 I.D x 1\16 (Item #: 159126) $3.98

$photo of <UL> <li>For Massey Ferguson tractor models 2675, 2705<\li> <li>Replaces Massey Ferguson OEM number 744779M91<\li> <li>Replaces Perkins OEM number 41117221<\li> <li>Flywheel only<\li> <li>Additional Handling and Oversize Fees Apply To This Item<\li> <\UL>$
Massey Ferguson Flywheel Less Ring Gear - For Massey Ferguson tractor models 2675, 2705 Replaces Massey Ferguson OEM number 744779M91 Replaces Perkins OEM number 41117221 Flywheel only Additional Handling and Oversize Fees Apply To This Item (Item #: 159151) $1639.01

$photo of <UL> <li>For Massey Ferguson tractor models 253, 263, 265S (Turkey), 275 (UK), 285S (Turkey), 290 (UK), 360, 362, 365 (s\n B18009-earlier), 375, 390, 390T, 393, 394S (s\n D03066-earlier), 396, 398, 399 (with 1006.6 engine), 399 (with A6-354.4 engine), 670, 690, 698, 699, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250<\li> <li>Replaces Massey Ferguson OEM number 1617923M3<\li> <li>Tooth: 33<\li> <li>Spline: 17<\li> <\UL>$
Massey Ferguson Gear - 3rd Pinion, Countershaft - For Massey Ferguson tractor models 253, 263, 265S (Turkey), 275 (UK), 285S (Turkey), 290 (UK), 360, 362, 365 (s\n B18009-earlier), 375, 390, 390T, 393, 394S (s\n D03066-earlier), 396, 398, 399 (with 1006.6 engine), 399 (with A6-354.4 engine), 670, 690, 698, 699, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250 Replaces Massey Ferguson OEM number 1617923M3 Tooth: 33 Spline: 17 (Item #: 165913) $110.77

$photo of <UL> <li>For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699<\li> <li>Replaces Massey Ferguson OEM number 1687430M1<\li> <li>20 Teeth<\li> <\UL>$
Massey Ferguson Pinion Gear, Countershaft 2nd - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699 Replaces Massey Ferguson OEM number 1687430M1 20 Teeth (Item #: 165942) $56.00

$photo of <UL> <li>For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699<\li> <li>Replaces Massey Ferguson OEM number 1688127M1<\li> <li>14\21 Teeth<\li> <\UL>$
Massey Ferguson Reverse Idler Gear - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699 Replaces Massey Ferguson OEM number 1688127M1 14\21 Teeth (Item #: 165953) $13.98

$photo of <UL> <li>For Massey Ferguson tractor models 135, 150, 231, 235, 240, 245, 250<\li> <li>Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D<\li> <li>Replaces Massey Ferguson OEM number 906468M1<\li> <li>50 Teeth<\li> <\UL>$
Massey Ferguson Main Drive Gear - For Massey Ferguson tractor models 135, 150, 231, 235, 240, 245, 250 Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D Replaces Massey Ferguson OEM number 906468M1 50 Teeth (Item #: 165954) $20.98

$photo of <UL> <li>For Massey Ferguson tractor models 230 (s\n 9A349239-earlier), 231, 235, 240 (s\n N01001-earlier), 240P, 245 (s\n 9A349239-earlier)<\li> <li>Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D<\li> <li>Replaces Massey Ferguson OEM number 532906M4<\li> <li>32 Tooth<\li> <li>21 Spline<\li> <li>Fits Tractors with Live PTO<\li> <\UL>$
Massey Ferguson PTO Driven Gear - For Massey Ferguson tractor models 230 (s\n 9A349239-earlier), 231, 235, 240 (s\n N01001-earlier), 240P, 245 (s\n 9A349239-earlier) Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D Replaces Massey Ferguson OEM number 532906M4 32 Tooth 21 Spline Fits Tractors with Live PTO (Item #: 166769) $125.45

No
Picture
Massey Ferguson Ring Gear - For Massey Ferguson tractor models 1150, 1155 Replaces Massey Ferguson OEM number 737384M1 Replaces Perkins OEM number 31162127 Teeth: 124 (Item #: 169875) $12.98

$photo of <UL> <li>For Massey Ferguson tractor models 396, 399, 699, 4260, 4270, 4360 <li>Replaces Massey Ferguson OEM number 3819720M1, 747694M1<\li> <\li> <li>Compatible with Perkins Engine (s) A6.354, 1006-6<\li> <li>Replaces Perkins OEM number 31161148<\li> <li>Teeth: 118<\li> <li>I.D.: 350mm (13.78 )<\li> <\UL>$
Massey Ferguson Flywheel Ring Gear - For Massey Ferguson tractor models 396, 399, 699, 4260, 4270, 4360 Replaces Massey Ferguson OEM number 3819720M1, 747694M1 Compatible with Perkins Engine (s) A6.354, 1006-6 Replaces Perkins OEM number 31161148 Teeth: 118 I.D.: 350mm (13.78 ) (Item #: 169877) $14.50

No
Picture
Massey Ferguson Gear Shift Knob - For Massey Ferguson tractor models 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 699 Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50C, 50D, 50E Replaces Massey Ferguson OEM number 1682623M1 4 Speed (Item #: 173635) $7.40

$photo of <UL><li>For Massey Ferguson tractor models 2640, 3505, 3525, 3545, 3630, 3650<\li><li>Replaces Massey Ferguson OEM nos 1617847M2<\li><li>Teeth: 13<\li><li>Splines: 20<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Massey Ferguson Final Drive Gear, Used - For Massey Ferguson tractor models 2640, 3505, 3525, 3545, 3630, 3650Replaces Massey Ferguson OEM nos 1617847M2Teeth: 13Splines: 20Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 431350) $245.01

$photo of <UL><li>For Massey Ferguson tractor models 2640, 3505, 3525, 3545, 3630, 3650<\li><li>Replaces Massey Ferguson OEM nos 1617841M2<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Massey Ferguson Gear Carrier, Used - For Massey Ferguson tractor models 2640, 3505, 3525, 3545, 3630, 3650Replaces Massey Ferguson OEM nos 1617841M2Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 431352) $176.01

No
Picture
Massey Ferguson Pinion Shaft Gear, High, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 519995M1HighTeeth: 31Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434172) $120.01

No
Picture
Massey Ferguson Gear Hub, Hi-Low, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 519993M1Teeth: 18Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 432373) $33.01

No
Picture
Massey Ferguson Pinion Shaft Gear, Low, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 519996M1LowTeeth: 18 and 46Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434173) $98.01

No
Picture
Massey Ferguson Countershaft Gear. 1st, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 518839M11st GearTeeth: 22Splines: 16Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434168) $98.01

$photo of <UL><li>For Massey Ferguson tractor models 30, 31, 40, 135, 150, 165, 175, 178, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 565, 575, 590<\li><li>Compatible with Massey Ferguson Construction and industrial models 20, 30, 31, 40, 50, 50C, 202, 203, 2135, 2200, 3165<\li><li>Replaces Massey Ferguson OEM number 899329M1<\li><li>Splines: 15<\li><li>Teeth: 53<\li><li>For a new version of this item use Item #: 153626<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Massey Ferguson PTO Gear, Used - For Massey Ferguson tractor models 30, 31, 40, 135, 150, 165, 175, 178, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 565, 575, 590Compatible with Massey Ferguson Construction and industrial models 20, 30, 31, 40, 50, 50C, 202, 203, 2135, 2200, 3165Replaces Massey Ferguson OEM number 899329M1Splines: 15Teeth: 53For a new version of this item use Item #: 153626Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 460709) $70.01

$photo of <UL><li>For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155<\li><li>Replaces Massey Ferguson OEM nos 521959M91<\li><li>Multi-Power Transmission<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Massey Ferguson Transmission Main Shaft Gear Assembly, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 521959M91Multi-Power TransmissionUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 498636) $291.01

No
Picture
Massey Ferguson Countershaft Gear, 2nd, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 518840M12nd GearTeeth: 28Splines: 16Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434169) $98.01

No
Picture
Massey Ferguson Reverse Idler Gear, Used - For Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155Replaces Massey Ferguson OEM nos 522023M1Teeth: 18Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 434175) $98.01

$photo of <UL><li>For Massey Ferguson tractor models 2640, 3505, 3525, 3545, 3630, 3650<\li><li>Replaces Massey Ferguson OEM nos 1617848M2<\li><li>Teeth: 20<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Massey Ferguson Differential Gear, Front Axle, Used - For Massey Ferguson tractor models 2640, 3505, 3525, 3545, 3630, 3650Replaces Massey Ferguson OEM nos 1617848M2Teeth: 20Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 431349) $147.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy