Welcome! Please use the navigational links to explore our website.
FREE SHIPPING on orders above $249.99!
Details
All Manufacturers
All Models
(800) 853-2651
Tractor Parts
Engine Kits
Carburetors
Salvage
Manuals
DVDs
Hats
Contact Us
Shipping Rates
Return Policy
Ordering Help
Company Info
Parts Warranty
Forums
Massey Ferguson Tractor Shaft
Click here to see parts by model
Massey Ferguson Full Gasket Set Without Crankshaft Seals
- Complete Engine gasket set less crankshaft and piston sleeve seals for Continental Gasoline Engines Z120 and Z129. Tractors: TE20, TO20, TO30. ** Cylinder sleeve seals, sold in quantity of 2, available as part number 1750000M1. Replaces 830631M91, 830631M1
(Item #: 107296, Ref. 830631M91)
$57.00
Massey Ferguson Crankshaft Gear
- Crankshaft gear, 24 teeth: TE20, TO20, TO30. Continental Gas Engine.
(Item #: 121583, Ref. 1750284M1)
$45.10
Massey Ferguson Crankshaft Gear
- Crankshaft Gear, 24 teeth. For tractor models TO35, 35, MH50, 50, 135, 150. Continental Gas Engine.
(Item #: 121584, Ref. 1750054M1)
$55.00
Massey Ferguson Camshaft Gear
- Camshaft gear, 48 teeth, Continental Gas Engine in models: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135, 150; Industrials: 202, 204, 2135. Replaces: 1046676M1, 1750237M1.
(Item #: 121582, Ref. 1750237M1)
$104.00
Massey Ferguson Camshaft
- Camshaft for Perkins diesel engines. For AT3-152 in tractor MF253. For T3-152.4 in tractors: MF360, MF364S; industrial: 40E. Replaces Perkins 31415264.
(Item #: 108086, Ref. 3637539M1)
$101.00
Massey Ferguson Camshaft
- Camshaft for Perkins Diesel Engines. For A4-236 in tractors: MF174-4S to engine serial number U08336N, 175 engine serial number 236-UA19817 and up, 180 engine serial number 236-UA19817 and up, MF184-4, MF255, MF265, MF270, MF274-4, MF670; Industrials: 31, 50D, 50E. For A4-248 in tractors: MF194-4, MF275, MF290, MF690; Industrial 50C. Replaces Perkins 31415321.
(Item #: 173129, Ref. 736818M1)
$123.00
Massey Ferguson Camshaft
- Camshaft for Perkins diesel engines. For A4-236 in tractors: MF174-4S engine SN# U08337N and up, MF375 eng.SN# U106655N and up. For A4-248 in tractors: MF383, MF390. Replaces Perkins 31415374.
(Item #: 173129, Ref. 3637537M1)
$123.00
Massey Ferguson Steering Shaft and Gear
- Shaft, steering gear: TE20, TO20, TO30. 13 1\2 inches long. NOTE: If the bearings for this shaft are needed please order part numbers: 5BC-TIM (Bearing), 6-TIM (Outer Race), 4CB-TIM (Inner Race). Order times two (X2) for a complete bearing set (Upper and Lower) for one tractor. Replaces 181365M1
(Item #: 108524, Ref. 9N3525)
$95.00
Massey Ferguson Crankshaft Kit with Bearings
- Kit includes main and rod bearings and thrust washers. For 235 with Perkins <152UA381043DL 3.152 Diesel WITH ROPE SEAL, engine serial number ending with DS, (203, 205, 2135, all with Perkins A3.152 or AD3.152 Diesel Engine Sserial number ending with DS), (135, 150, 20, 2244, 35, 40, 50, all with Perkins A3.152 or AD3.152 Engine serial number <152UA381043DL). Uses 2 piece rope seal. Also Perkins 3 Cylinder Gas with Rope type seal. Replaces 084402, 736532M1.
(Item #: 168650, Ref. 3638309M91)
$452.00
Massey Ferguson Steering Shaft Assembly
- For TO35, 35, 135, 202, 203, 204, 205, 2135 with Manual Steering. 21 3\8 inches Long.
(Item #: 165143, Ref. 180538M91)
$189.00
Massey Ferguson Steering Shaft and Nut Assembly
- For Power Steering on TO35, 35, 135 (>serial number 641016186), 2135 (prior to serial number 646001410). Shaft measures 21 3\4 inches overall length. Replaces 1751666M1, 1751666M91.
(Item #: 182854, Ref. 1751666M91)
$204.00
Massey Ferguson Steering Shaft and Nut Assembly
- For 135 Manual Steering (serial number 641616186>). Sheering Shaft and Nut Assembly. 22 3\8 inches long.
(Item #: 178983, Ref. 1031344M91)
$199.22
Massey Ferguson Crankshaft
- For TO20, TE20, both with Continental Z120 Gas Engine.
(Item #: 185383, Ref. 1750280M1)
$522.15
Massey Ferguson Crankshaft
- New crankshaft for Z145 Gas, without bearings. For tractor models 135, 150, 230, 235, 245, Industrial 20C, 30B, 2500, 4500FL.
(Item #: 102111, Ref. 1047539M1)
$715.97
Massey Ferguson Crankshaft, G176
- For tractor models 65, 165, 302, 304, 356, 3165. Crankshaft for G176 engine. Replaces: G176C300, 830756M91
(Item #: 102114, Ref. 830756M91)
$1175.01
Massey Ferguson Oil Pump Shaft and Rotor
- Fits TEA20, TED20, FE35 with 80, 85 or 87mm Standard Motors Engine.
(Item #: 173052, Ref. 827501M91)
$110.00
Massey Ferguson Crankshaft
- New. For Perkins 3 cylinder using ROPE SEAL. Note: In some cases you may have to reuse your old balancer weights. Call for details. Fits Perkins A3.152 and AD3.152 engines. Fits 50, 35, 30, 135, 235, Ind 20, 40, 202 Workbull, 2135, 2200.
(Item #: 102112, Ref. 736532M91)
$335.00
Massey Ferguson Crankshaft
- This new crankshaft is for a Perkins engine using aLip Type Seal in AD3.152 and G3.152 engines, gas and diesel. All with casting number 31312701. Fits 135, 230, 231, 240, 245, 250, 253, 360, 20, 20C, 40, 2135, 2200.
(Item #: 102113, Ref. 742827M91)
$350.00
Massey Ferguson Steering Shaft
- For tractor models 135 Deluxe and Vineyard, 135 Orchard, 20 Turf, 2135 Utility serial number 646001410>, 2135 Turf serial number 64800623>. All with Power Steering. Steering Shaft. 22 3\4 inches in length. 42912S.
(Item #: 179513, Ref. 1031341M91)
$235.00
Massey Ferguson Hydraulic Pump Drive Shaft with Coupler
- For 165, 175, Ind: 30, 3165. Front Mounted Hydraulic Pump Drive Shaft with coupler attached. 14 1\8 inches overall length, adapter end 7\8 inch threads, coupler end 13 splines.
(Item #: 115442, Ref. 707166M92)
$188.00
Massey Ferguson Lift Shaft
- For TO35, 35, 50, Early models of: 135, 150, 165, 35 Turf, 2135U, others with 37 tooth end splines. Replaces 184359M1 184359M2
(Item #: 160155, Ref. 184359M2)
$80.00
Massey Ferguson Lift Shaft
- 51 spline, 2 3\16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3.
(Item #: 151049, Ref. 897567M3)
$82.00
Massey Ferguson Camshaft
- With nut. For tractor models 135, 150, 230, 235, 245, 250 with Continental Z145 Engine.
(Item #: 111204, Ref. 1027656M1)
$148.00
Massey Ferguson Camshaft Sprocket
- (42 tooth). For TEA20, TED20, FE35. Standard 80mm, 85mm, 87mm Gas.
(Item #: 178260, Ref. 825135M1)
$99.00
Massey Ferguson Crankshaft Seal Kit
- Kit contains front and rear crank lip-type seals and gasket for rear and felt seal for front. For Continental Gas Engines: Z120, Z129, Z134, Z145. Tractor Models: TO20, TE20, TO30, TO35, F40, MF50, MF35, MF135, MF150, 202, 204. Replaces: 1500080M1, 15287A, 15288A, 1750112M1, 1750216M1, 1750216M92, 843893M1, 850185M1.
(Item #: 173222, Ref. VPC5122)
$24.50
Massey Ferguson Camshaft
- Replaces 31415261. For the following Models with A3.152, AD3.152 or AG3.152 engines: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830
(Item #: 173283, Ref. 733507M1)
$131.00
Massey Ferguson Steering Shaft
- Fits early 230, (235, 245 -> 9A349239 with Power steering pump)
(Item #: 180545, Ref. S.43603)
$159.00
Massey Ferguson Lift Pump Camshaft
- For tractor models FE35, TO35, 135, 150, 165, 175, 202, 202, 204, 205, 302, 304, 3165, 35, 50, 65, 2135 TURF UTILITY NARROW. This camshaft has 10 spline and 1.3 Inch REAR SPLINE LENGTH.
(Item #: 180715, Ref. 181993M91)
$150.00
Massey Ferguson Clutch Release Shaft
- For tractor models FE35, TO35, 165, 180, 20F, 240, 250, 270, 275 UK, 290 UK, 35, 40E, 50, 50E, 65. This shaft is 1 inch diameter x 5 17\32 inches long. Also replaces 1679460M1.
(Item #: 166103, Ref. 180444M2)
$13.90
Massey Ferguson PTO Shaft
- For tractor models 20, 20B, 20C, 20F, 282, 283, 30, 30D, 31, 390, 40, 40B, 40F, 50D, 50E, 50G, 240 LIVE, (245, 250, 270 ALL LIVE\IND PTO), (265, 275, ALL LIVE\IND PTO with WET BRAKE), 290 SINGLE SP PTO, 230 REAR AXLE serial number FD101\ CD 8028->LIVE, 235 serial number FD101->LIVE. This is a 540 RPM PTO Shaft, 24.125 inches long, 21 drive splines.
(Item #: 156331, Ref. 1660288M91)
$117.00
Massey Ferguson PTO Shaft Seal, Double Lip
- PTO Oil Seal fits 1-1\8 inch or 1-3\8 inch PTO Shaft. 2.45 inch outside diameter, 1 5\8 inch inside diameter, 5\8 inch wide. For tractor models TE20, TO20, TO30. Replaces 195763M1.
(Item #: 111314, Ref. D9NN703BB)
$4.00
Massey Ferguson PTO Shaft
- For 270, (275, 290 both 2SP), 265 2SP IND PTO serial number 9A349239 and up, 390 2 SP serial number below P38370, (375, 390, 390T, 398 all engine serial number P38370 and up), (670, 690 all France). PTO Shaft 540 RPM. 24.125 inches long, 21 and 38 Drive Splines. Replaces: 3613208M91, 3613208M92.
(Item #: 168897, Ref. 532899M1)
$96.98
Massey Ferguson PTO Shaft
- For 270, 290, 565, 575, 590, 675, 690, 365 serial number below B18009, 375 serial number below B32999, 362 serial number below 32999, (390, 398 both serial number above B18009), (265, 275 both serial number above 9A349239), 299 with 1006.6 engine. PTO Shaft 1000 RPM. Replaces 532897M1. 38 teeth, 21 splines. Replaces 3610936M2, 532897M1.
(Item #: 111932, Ref. 3610936M2)
$207.00
Massey Ferguson PTO Shaft
- For 30 late production with dry brakes and Live PTO 165 UK serial number 130773-144682 with Live PTO, 135 UK serial number 439191 and up with Live PTO, 230 with rear axle serial number below FD101 or CD8028 with Live PTO, (255, 265, 275 all with dry brakes and Live PTO), 40 with dry brakes rear axle serial number below FD101 or CD8028 with Live PTO, (135, 150, 175, 20, 31 all with Live PTO), 165 with multi-power and standard transmission with Live PTO, 235 with rear axle serial number below FD101 with Live PTO. PTO Shaft 540 RPM, 24 1\32 inches long, 21 drive splines.
(Item #: 166771, Ref. 1868557M93)
$158.00
Massey Ferguson PTO Shaft
- For 165 UK serial number below 130773 with independent PTO, 135 UK serial number below 439191 with independent PTO, (135, 150, 180, 30, 31 all with independent PTO) 165 with multi-power and standard transmission with independent PTO, 175 with multi-power and 8 speed transmission with independent PTO. PTO shaft 540 RPM, 22 3\4 inches Long, 21 drive splines.
(Item #: 173056, Ref. 1867082M91)
$152.00
Massey Ferguson PTO Shaft, 540 RPM
- For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3\8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02.
(Item #: 168169, Ref. 181204M92)
$64.00
Massey Ferguson Rear Drive Shaft PTO
- For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10\18 splines. Replaces 886548M1.
(Item #: 886366M91)
$178.34
No
Picture
Massey Ferguson PTO Shaft
- For 1100, 1105, 1130, 1135, 1150, 1155. PTO Shaft.
(Item #: 173075, Ref. 509596M1)
$370.27
No
Picture
Massey Ferguson PTO Drive Shaft
- For tractor models 1105, 1135, 1155. PTO Drive Shaft. 33.06 inches long, 17 spline both ends.
(Item #: 114675, Ref. 528009M1)
$299.98
Massey Ferguson Crankshaft Rear Main Seal
- For Pony with N62 Contintal.
(Item #: 106077, Ref. 49910)
$10.20
Massey Ferguson Crankshaft Rear Main Seal
- For MH44, Super 44, 55, all with 4 cylinder gas engines.
(Item #: 107227, Ref. 760147M1)
$90.00
Massey Ferguson Crankshaft Seal, Front, Lip Type, Perkins 236 and 248 Diesel
- For tractor models 31, 6500, 175, 180, 255, 265, (275 engine serial number prefix 248UA or LF---N or LF---U only, (290, 294-4, 690 engine serial number prior to LF---U839080J) all with 236 and 248 CID.
(Item #: 107222, Ref. 1447690M1)
$9.10
Massey Ferguson Crankshaft Seal, Rear, Rope Type, Perkins
- For tractor models late 165 w\AG4-212UA, 175, 180, 255, 265, 275, 31, 50C, 6500 all with 236 or 248 CID Direct Injection Perkins Diesel. Injectors at angle in cylinder head. Price shown is for each, sold only in multiples of 2 items. OEM numbers 735942M91, 731626M1, 4224056M1, and 36883108.
(Item #: 107232, Ref. 735942M1)
$1.98
Massey Ferguson Crankshaft Seal, Rear, Lip Type, Perkins
- Used on Perkins Engines AG3-152, AD3-152, AD4-203, A4-236, A4-248, A4-318. For tractor models 135, 150, 20, 40, 2500, 230, 235, 4500, 200B, 245, 20C, 30B, 250 with engine serial number prefix CE22488U or CE31089U, 65, 165, 255, 30, 40B, 50, 302, 304, 356, 3156, 300, 175, 180, 265, 31, 6500, 275 with engine serial number prefix 248UA or LF---N or LF---U, 290 early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, 285, 1080, 1085, 540.
(Item #: 107230, Ref. 1447049M91)
$19.90
Massey Ferguson Full Gasket Set With Crank Shaft Seals
- For TE20, TO20 with Continental Z120 and TO30 with Continental Z129. Comes with crankshaft seals. Does not include cylinder sleeve seals. Cylinder sleeve seals, sold in quantity of 2, available as part number 1750000M1.
(Item #: 189103, Ref. FS1865)
$61.00
Massey Ferguson Rocker Shaft, Plug Type
- Plugs NOT included (Note: Massey had two different types of ways to plug the end of these shafts. Some had threaded plugs, but this is the type that uses plugs that are pressed in.) For tractor models TO35, F40, 35, 50, 135, 150, 230, 235, 245, 20C, 30B, 2135. With Continental Z134 or Z145 gas engine.
(Item #: 185557, Ref. 1750073M1)
$35.60
Massey Ferguson Rocker Shaft Bushing
- This is a Set of 8 Rocker Shaft Bushings, semi finished. For tractor models TE20, TO20, TO30, 135 Deluxe, 150 with Continental Z120, Z129, Z134 or Z145 Gas Engines.
(Item #: 184542, Ref. S.60327)
$43.80
Massey Ferguson Crankshaft Oil Seal, Front
- Fits tractor models TEA20, TED20, TEF20, TO35, FE35 with Standard 80, 85, 87mm Gas Engines, or 20C and 23C with Diesel Engines.
(Item #: 173065, Ref. 825740M1)
$10.30
Massey Ferguson PTO Shaft
- PTO shaft only, 1-3\8 inch 6-spline, converts original 181173M1 from 1-1\8 inch 6-spline, to 1-3\8 inch 6-spline. For tractors: TE20, TO20, TO30 (includes 181183-38 retainer sleeve).
(Item #: 186970, Ref. 9N710-38)
$67.00
Massey Ferguson Shaft
- Shaft and pinion, leveling box. 15.120 inches long, 1.000 inch diameter, 5.620 inches of thread. For heavy-duty and extra heavy-duty leveling boxes 897649M1 and 897649EXHD. For tractors: MF65, MF165, MF175, MF265. Replaces 1860833M1.
(Item #: 173271, Ref. 1860833M2)
$9.01
Massey Ferguson Lower Link Shaft
- Pivot shaft, for lower link, except Orchard and Vine. Threaded ends 5\8 inch NF and 3\4 inch NF, overall length 6 inch. For tractors: MF230, MF231, MF235, MF240, MF245 Industrials: 20, 20C, 20D, 30 Turf. Replaces 1867851M2, 1867851M3.
(Item #: 164478, Ref. 1867851M3)
$26.50
Massey Ferguson Shaft
- Drive shaft with coupler attached, for front mounted hydraulic pump. 15-1\2 inches overall length, adapter end 7\8 inch left hand thread, coupler end 7\8 inch, 13-splines. For Industrials: 40B, 50A. For 40B, 50A.
(Item #: 167625, Ref. 190495M93)
$209.00
Massey Ferguson Bearing, Input Drive Shaft
- Bearing, ball, input drive shaft. Inside diameter 1.574 inches, outside diameter 3.150 inches, width .709 inches. For tractor models TO35, MF35, 50, 65, 135, 150, 165, 175, 180.
(Item #: 172367, Ref. 195505M1)
$28.10
Massey Ferguson Crankshaft Assembly
- Crankshaft kit with standard rod and main bearings and thrust washers. For Perkins Diesel A3-152 and AD3-152. Also Perkins 3 Cylinder gas with rope type rear seal. For 200, 203, 205, 20, 2135, 2200, 2244, 2500, 35, 40, MF135, MF150, MF235, MF35. This is for a 2 piece rope seal.
(Item #: 168650, Ref. 3638309M91)
$452.00
Massey Ferguson Crankshaft
- Crankshaft using rear rope type seal. For Perkins diesel A4-203 and AD4-203. For 300, 302, 304, 30, 3165, 356, 50A, 50, MF165, MF255, MF65. Order bearings seperately. ***Additional $20.00 shipping due to weight. ***
(Item #: 102115, Ref. 3638473M91)
$394.00
Massey Ferguson Lift Pump Drive Shaft
- Drive shaft with coupler attached. For front mounted hydraulic pump drive, 11-3\8 inch overall length, adapter end 3\4 inch left hand threads, coupler end 3\4 inch round bore with 3\16 inch keyway. For tractors: MF135 Orchard Industrials: 20, 35 utility, 202 serial number 30315.
(Item #: 168962, Ref. 704997M92)
$148.00
Massey Ferguson Shaft
- Drive shaft with coupler attached. For front mounted hydraulic pump drive, 11-5\8 overall length, adapter end 3\4 left hand threads, coupler end 7\8 13-splines. For industrial: 40. For 40
(Item #: 173046, Ref. 708574M92)
$156.00
Massey Ferguson Hydraulic Pump Drive Shaft
- Drive shaft with coupler attached, for front mounted hydraulic pump drive, 12-3\8 inch overall length, adapter end 3\4 inch left hand threads, coupler end 7\8 inch, 13-splines. For Industrials: 20C, 30B, 30D. For 20C, 30B, 30D.
(Item #: 173045, Ref. 729563M91)
$176.00
Massey Ferguson Shaft
- Drive shaft with coupler attached, for front mounted hydraulic pump, 15-7\8 inch overall length, adapter end 7\8 inch left hand threads, coupler end 7\8 inch 13-splines. For Industrials: 50C, 50D. For 50C, 50D.
(Item #: 167415, Ref. 729566M91)
$203.00
Massey Ferguson Steering Shaft Bearing Inner Cone
- Bearing inner cone. One used for tractor models TE20, TO20, TO30. Part not in these models parts manual.832397M1
(Item #: 111625, Ref. 4CB-TIM)
$24.60
Massey Ferguson Shaft Pinion
- Shaft and pinion, leveling box, 12-9\32 inches long. For tractors: MF65, MF235, MF245, MF265.
(Item #: 123370, Ref. 897680M2)
$14.30
Massey Ferguson Shaft Level Box
- Shaft and pinion, leveling box, 14-5\8 inches long, 3\4 inch NC threads. For tractors: MF65 Hi-Clearance, MF150 Row Crop, MF165 Row Crop Industrials: 30, 40.
(Item #: 113926, Ref. 897681M2)
$15.10
Massey Ferguson PTO Pinion Shaft
- PTO Pinion Shaft, For Multi-Power Trans. 17 TEETH 10 SPLINES Seal Not Included. For MF135, MF150, MF165, MF175, MF180
(Item #: 105361, Ref. 899332M92)
$106.00
Massey Ferguson PTO Shaft Conversion Assembly
- Shaft Assembly converts 1-1\8 inch PTO System to 1-3\8 inch. This is a complete Assembled shaft with bearing and housing assembly that is ready to install by removing 4 bolts from cover. Length 30-7\8 inches. Fits TO20, TE20, TEA20, TED20, TEF20, TO30. Uses gasket C5NN747A and cap 310088 (not included).
(Item #: 109422, Ref. 9N700-38)
$83.00
No
Picture
Massey Ferguson Bushing, Hydraulic Lift Shaft
- Size is: 2-3\8 inch outside diameter, 2 inch inside diameter, 3 inches long. For tractors: TE20, TO20, TO30. For MF135, MF150, MF35, MF50, TO35.
(Item #: 173523, Ref. 180896M91)
$14.20
Massey Ferguson Leveling Box Shaft
- Shaft and pinion, leveling box, 10-1\2 inches long. For tractors: TE20, TO20, TO30, MF35, MF135 (used in standard right hand assembly with 14-1\2 inch yoke). For MF165, MF65.
(Item #: 173693, Ref. 185220M1)
$20.20
Massey Ferguson Seal, PTO Pinion Shaft Retainer
- This PTO Pinion Shaft Retainer Seal measures 1 15\16 inches outside diameter, 1 5\8 inches inside diameter and 1\4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3
(Item #: 128472, Ref. 1860867M3)
$5.50
Massey Ferguson MAIN Shaft Bearing
- Bearing, ball, for MAIN shaft (1 37\64 inch). For all single and dual clutch, 6-speed and multi-power models. Tractors: TO35, MF35, MH50, MF65, MF135, MF150, MF165.
(Item #: 169639, Ref. 195502M2)
$9.60
No
Picture
Massey Ferguson Output Shaft, PTO Seal
- A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal.
(Item #: 107013, Ref. 834216M1)
$9.30
Massey Ferguson Crankshaft
- New Crankshaft only (bearings not included) for Continental Z129 and Z134 Gas Engines. For TO30, TO35, 35, 50, MH50, 135, 202, 204 . See our engine bearings category for prices and sizes. Also replaces 1750169M1.
(Item #: 102110, Ref. 830686M91)
$430.00
Massey Ferguson Input Shaft Housing Gasket
- For tractor models F40, FE35, TO35, 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50, MH50.
(Item #: 166860, Ref. 180434M1)
$1.40
Massey Ferguson Input Housing Shaft Seal
- 1-1\8 inch inside diameter x 2-1\4 inch outside diameter. For tractor models (TO35, FE35 with single clutch), 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50.
(Item #: 178027, Ref. 195523M1)
$5.60
Massey Ferguson Lift Shaft Bushing
- Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied.
(Item #: 152601, Ref. 181018M1)
$8.90
Massey Ferguson Steering Shaft Bearing Cup
- Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. For TE20, TO20, TO30. Replaces 760907M1.
(Item #: 111635, Ref. 6-TIM)
$11.10
Massey Ferguson Steering Shaft Seal
- 49\64 inch X 1 3\8 inch X 25\64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1.
(Item #: 172323, Ref. 1751702M1)
$8.80
Massey Ferguson PTO Main Drive Shaft, 19 teeth, 10 Spline
- For the following tractors using Multi-Power Transmissions: 135 (serial number <9A11664), 150 and 165 (early), 35 and 50 (Transmission serial number CQ16563>), 65, FE135 (serial number 307136>), FE35. PTO Main Drive Shaft has 19 tooth gear and 10 spline shaft.
(Item #: 173094, Ref. 191500M92)
$200.00
Massey Ferguson PTO Main Drive Shaft Housing Seal
- For tractor models 135, 150, 165, 175, 180, 35. PTO Main Drive Shaft Housing Seal is 1 5\8 x 2 x 19\32 inches. Replaces 192329M1, 192329M2, 882296M1, 192329M1, 192329V2
(Item #: 166859, Ref. 192329M2)
$9.50
Massey Ferguson Bearing, PTO Main Drive Shaft
- For 135, 150, 165, 175, 180, 235, 245, 255, 265, 270, 275, 285, 290, 35, 50, 65. PTO Main Drive Shaft Bearing
(Item #: 173077, Ref. 833646M1)
$31.00
Massey Ferguson Shaft Bushing, PTO
- For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing.
(Item #: 173076, Ref. 180461M1)
$12.60
Massey Ferguson Seal - PTO Main Drive Shaft
- For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 290, 35, 50, 65, FE35. PTO Main Drive Shaft Seal.
(Item #: 165440, Ref. 883935M1)
$4.20
Massey Ferguson Power Input Shaft
- Power Input Shaft with 6 speed transmission has 18 tooth, 10 spline, length of 14 inches. For tractor models 135, 150, 20, 202, 204, 20C, 2135, 2200, 230, 235, 245, 285, 35, 50, F40, FE135, FE35, TO35. Replaces 1669325M1, 180420M1.
(Item #: 166908, Ref. 1669325M1)
$128.00
Massey Ferguson Transmission Mainshaft
- For Regular Transmission with serial number to 213313. Shaft is 11.375 inches long, 18 spline. For the following tractors: 35, 50, 65, FE35, TO35.
(Item #: 173091, Ref. 180441M1)
$88.98
Massey Ferguson Drive Shaft, Reverse Gear
- 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35.
(Item #: 170391, Ref. 180445M1)
$20.87
Massey Ferguson Countershaft Driven Gear
- Countershaft Driven Gear, 6 speed trans. 50 tooth, 20 spline. For tractor models 135, 150, 20, 202, 2135, 2200, 230, 235, 245, 35, 50, F40, FE135, MH50, TO35.
(Item #: 165905, Ref. 181799M1)
$77.15
Massey Ferguson Countershaft
- Countershaft, 6 speed and manual shuttle. 17\20 spline, 15 tooth. For the following tractors: 1080, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 235, 245, 30, 35, 50, F40, FE135, TO35.
(Item #: 178325, Ref. 183054M92)
$192.22
Massey Ferguson Countershaft
- Countershaft, 6 speed transmission. 20\17\10 spline, 15 tooth, 12.750 inches long. For the following tractors: 135, 202, 203, 204, 205, 2135, 2200, 3165 35, 50, 65, FE135, MH50, TO35.
(Item #: 173663, Ref. 183085M1)
$140.60
Massey Ferguson Cross Shaft
- 37 splines on ends, 42 splines in center, 2 inch bushing diameter used with 180910M1 lift arm and 181018M1 bushing. For the following tractors: 130, 135, 150, 165, 202, 203, 204, 205, 2135, INDUSTRIAL 25, 302, 304, 35, 50, 65, F40, MH50, TO35.
(Item #: 160155, Ref. 184359M1)
$80.00
Massey Ferguson Crankshaft Pulley, 3-Hole
- For Perkins Engines. Fits Massey Ferguson Forklifts: 2500 and 4500. Massey Ferguson Industrial: 20 (Gas Engine serial number <152UA22587A, All Diesels), 20C (Diesel) 20D, 20F, 203 (Diesel), 205 (Diesel), 2135 (Utility), 2200, 30B (Diesel), 30D, 30E, 30H, 40 (Gas Engine serial number <152UA22587A, All Diesels), 40E, Tractors: TO35 (Equipped with 102 Loader), 135 (Gas Engine serial number <152UA22587A, All Diesel), 150 (Gas Engine serial number <152UA22587A, All Diesel), 230, 235 (Orchard), 245 (Orchard), 35 (Diesel), 35X (FE) (Diesel), 50 (Diesel), 65 (Engine serial nubmer <2820092). Uses 704812M93 hydraulic adapter plate. Replaces 31147784.
(Item #: 118287, Ref. 734628M1)
$82.00
No
Picture
Massey Ferguson Crankshaft Seal, Rear
- For Standard 20C and 23C DIESEL Engines in: TO35, TEF20. Rear seal.
(Item #: S.42233)
$15.38
Massey Ferguson Crankshaft Gear
- Used on 3-cylinder Perkins A3.152 and AD3.152 engines on: 30, 35, 50, 135, 235, 245. INDUSTRIALS: 20, 40, 202, 2135, 2200. Replace 02139014, 31163411, 31163491, 31163492, 31163493, 31163494, 31163495, 3637518M1, 3641085M1, 3641397M91, 3641826M1, 410132, 731228M1, 735599M1, 81804043, 957E6306
(Item #: 113700, Ref. 731228M1)
$40.10
Massey Ferguson Countershaft, Transmission, 17 Spline, 15 Teeth
- Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35.
(Item #: 173274, Ref. 189391M92)
$224.00
Massey Ferguson Drive Shaft Retainer Housing
- For NON Multipower transmission. Fits 8 Speed transmission in: 135, 150, 165, 235, 240, 245, 250, 255, 265, 275, 383. Fits 8 or 12 speed transmission in: 360, 362, 375, 390, 390T, 398, 399.
(Item #: 151853, Ref. 1693833M92)
$79.00
Massey Ferguson Camshaft Timing Gear
- 50 tooth, for engine type PE 144 A3.152\AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139
(Item #: 172327, Ref. 731203M1)
$45.01
Massey Ferguson Steering Rocker Top Shaft
- Shaft has 32 splines, 4 teeth and no adjustment slot on end. For tractor models 135, 148, 230, 240, 250, 35, FE135, FE35.
(Item #: 151831, Ref. 1850017M1)
$64.00
Massey Ferguson Coupling, Rear Drive Shaft
- 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699.
(Item #: 160154, Ref. 1680189M1)
$34.98
Massey Ferguson Steering Shaft Bearing
- Replaces 760906M1. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. For tractor models TE20, TO20, TO30.
(Item #: 111285, Ref. 5BC-TIM)
$14.50
Massey Ferguson Mainshaft, Heavy Duty, 8 Speed Trans.
- 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1.
(Item #: 125331, Ref. 1687642M1)
$92.00
Massey Ferguson Differential Lock, Cam and Shaft Assembly
- For tractor models 135, 150, 20, 202, 204, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135, FE35.
(Item #: 173127, Ref. 190960M92)
$58.00
Massey Ferguson Rocker Shaft
- For tractor models 3 Cylinder Perkins 135, 150, 20, 200, 203, 205, 20C, 2135, 220, 2200 engine serial number ending in D, 2244, 230, 235, 245, 250, 2500, 30B, 35, 40, 50. Replaces 3637532M91, 731754M91, 1076971M91, U7LR0002, ZZ90047, 747938M91
(Item #: 133942, Ref. ZZ90047)
$12.10
Massey Ferguson Camshaft, 4.236 Diesel
- For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275 engine serial number <248UA123423L, 275 engine serial number U123424L>, 275 engine serial number UA103064L-U106654N, 285 engine serial number U123424L>, 290 serial number U123424L>, 50, 50B, 50C, 590 serial number U123424L>, 6000. Replaces 31415321, 31415321P, 736818M1, 736818V1, 2100040, 70255924, 7C - 8002.
(Item #: 173129, Ref. 31415321)
$123.00
No
Picture
Massey Ferguson Crankshaft, 4.236 Diesel
- Replaces 738226M91, 3637789M91. 3 bolt, splined nose, rope seal. For tractor models 165, 255, 275 engine SN# <248UA123423L, 50C, 6000.
(Item #: 102118, Ref. 31315884)
$496.00
Massey Ferguson Crankshaft seal, Front Lip Type, Perkins
- Fits 152 CID 3 cylinder or 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203 and 205 to serial number 659002115, 35, FE35, MF35, MF50, 2135, MF235 engine serial number ending in D, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, 40B, 50, MF165, MF255.
(Item #: 107221, Ref. 1851747M1)
$9.20
Massey Ferguson Crankshaft Seal, Rear Rope Type, Perkins
- Sold individually - requires 2. Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255.
(Item #: 107228, Ref. 735866M1)
$2.60
Massey Ferguson Clutch Shaft, Bushing
- 1 inch x 1-1\16 inch x 3\4 inch. For tractor models TE20, TO20, TEA20, TO35, FE35, F40. Replaces 1321, 184592M1, 180802M1, 184 592M1
(Item #: 165433, Ref. 184592M1)
$5.50
Massey Ferguson Brake Shaft, Bushing
- 1-3\8 inch x 1-1\2 inch x 1-7\16 inch. For tractor models TE20, TO20, TEA20, TO30, TO35, FE35, F40, 1080, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 35, 50.
(Item #: 150915, Ref. 180801M1)
$8.50
Massey Ferguson Crankshaft Oil Seal, Rear
- 71mm x 95mm x 11.5mm. For tractor models 135, FE35, TEA20, TED20. All with 87mm Standard Gas Engines.
(Item #: 172333, Ref. 825208M1)
$8.60
No
Picture
Massey Ferguson Crankshaft Seal, Rear
- For tractor models TEA20, TED20, FE35, 135 UK. All using 80, 85 or 87mm Standard Gas Engines.
(Item #: S.41725)
$7.12
No
Picture
Massey Ferguson PTO Shaft
- 540 RPM, 7.138 inches long, 6 spline. For tractor models 1100, 1105, 1130, 1135, 1150.
(Item #: 112169, Ref. 509695M2)
$166.00
Massey Ferguson PTO Stub Shaft
- 1000 RPM, 4.55 inches long, 21 spline. Replaces 510114M2. For tractor models 1100, 1105, 1130, 1135, 1150, 1155.
(Item #: 108964, Ref. 677496)
$104.00
Massey Ferguson Steering Shaft Bearing Cone
- Upper\lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180549M1.
(Item #: 111857, Ref. 8N3571-OE)
$12.50
Massey Ferguson Steering Shaft Bearing Cup
- Upper\lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180526M1.
(Item #: 173338, Ref. 8N3552)
$13.10
No
Picture
Massey Ferguson PTO Drive Shaft
- For tractor models 1100, 1130 both with transmission serial numbers DU5466 and below, DU5215-5218, DU5255-5258.
(Item #: 151969, Ref. 514181M1)
$286.00
Massey Ferguson Crankshaft Seal, Rear
- For Massey Harris model: Pacer.
(Item #: 106077, Ref. 49910)
$10.20
Massey Ferguson Crankshaft Pulley
- For tractor models (135, 20 with Perkins Gas Engine serial number up to 152UA25587A and all diesel engines), (2135 with diesel engine), (240 with AD3.152 Diesel Engine), (35 with Perkins Diesel Engine serial number 1861319 and up), 360. Replaces 31143733.
(Item #: 173096, Ref. 734627M1)
$62.00
Massey Ferguson Seal, Power Steering Pump Driveshaft
- For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width.
(Item #: 173648, Ref. 1751651M1)
$6.30
Massey Ferguson Steering Arm Shaft, Center Upper
- For tractor models (165 serial number up to 643011388), (175 serial number up to 644002127), (3165 serial number up to 647001441).
(Item #: 105199, Ref. 194590M1)
$42.50
Massey Ferguson Steering Shaft Crank Arm, Center
- Dead spline is in 9:00 position. For tractor models (165 serial number up to 643011388), (175 serial number up to 644002127), (3165 serial number up to 647001441).
(Item #: 102535, Ref. 510336M2)
$45.50
Massey Ferguson Steering Shaft Arm, Center Lower
- 43 splines includes 1 double spline. Spline Major Diameter: 1.940 inch, Minor Diameter: 1.852 inch. For tractor models (165 serial number up to 6430011388), (175 serial number up to 644002127), (3165 serial number up to 647001441).
(Item #: 102534, Ref. 194567M92)
$83.00
Massey Ferguson Steering Shaft, Main
- For tractor models (165 serial number 643003510-643011388), (175 serial number 644000638 and up). Shaft is 13.5 inches long.
(Item #: 105212, Ref. 510896M1)
$315.08
Massey Ferguson Steering Shaft, Manual Steering
- 1.870 inch diameter, 11.375 inches long. For tractor models 165 UK, 168, 175 UK, 178, 185, 188, 265S, 270, 275 UK, 283, 290, 392S, 50E, 50H, 565, 575, 590, 670, 675, 690. Replaces 898023M2.
(Item #: 105214, Ref. 1676666M1)
$81.61
Massey Ferguson Crankshaft
- Keyed nose, lip seal. For tractor models (65, 165, 255, 302, 304, 3165, 356, 300 all with D4.203 or 4.203 engines SN# 29C1085 and up). Replaces ZZ90111, 94454, 94455, 3637458M91, 742344M91
(Item #: 102116, Ref. 3637458M91)
$251.98
Massey Ferguson Crankshaft Pulley
- Crankshaft Pulley is for tractor models 180, 184-4, 255, 265, 274-4, 275, 282, 294-4, 50C, (60 late production), (165 South Africa only), (175 with diesel engine). Replaces 31148791, 31148792, 31148797, 31148798, 31154612, 3637520M1, 734812M1, 735506M1.
(Item #: 172374, Ref. 3638318M1)
$76.00