[an error occurred while processing this directive]
John Deere
Master Parts List
 
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5 8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1 2 inches x 9-1 2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: 182644)		$367.64
 
ASAP Assemblies
Power Shaft Clutch Hub -
  • For John Deere tractor models 4000 (s n 201000-later), 4020 (s n 201000-later), 4230< li>
  • Replaces John Deere OEM number R41043< li>
  • Transmission Clutch Pack, Rear, Power Shift< li> < UL> (Part No: 116835)
$485.00
 
ASAP Balancer
Balancer Shaft - Left Hand -
  • For John Deere tractor models 2140, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Construction & industrial models 310C (engine s n 299999-earlier), 315C (engine s n 299999-earlier), 340D, 344E (engine s n 300000-later), 344G, 401C (engine s n 299999-earlier), 410D, 440C, 440D (early), 444E (engine s n 299999-earlier), 444G, 448D, 450E, 450G (engine s n 299999-earlier), 455E, 455G (engine s n 299999-earlier), 490, 490E, 510B, 510C (engine s n 299999-earlier), 510D, 515B, 540B, 540D (engine s n 299999-earlier), 540E (engine s n 383839-earlier), 548D, 548E (engine s n 383839-earlier), 550, 550A (engine s n 299999-earlier), 550B (engine s n 299999-earlier), 550G (engine s n 299999-earlier), 555, 555A (engine s n 299999-earlier), 555B (engine s n 299999-earlier), 555G (engine s n 299999-earlier), 590D (engine s n 299999-earlier), 595, 595D (engine s n 299999-earlier), 610B, 610C, 650G (engine s n 299999-earlier)< li>
  • Compatible with John Deere Engine(s) 4045, 4045T, 4239A, 4239T, 4276 (diesel and turbo diesel)< li>
  • Compatible with John Deere Hay Cutting(s) 3830 (engine s n 299999-earlier)< li>
  • Replaces John Deere OEM number AR69711< li>
  • Replaces John Deere Casting number R54634< li>
  • Bolt-on weight style< li>
  • For left hand side< li> < UL> (Part No: 158783)
$92.00
Balancer Shaft - Right Hand -
  • For John Deere tractor models 2140, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Construction & industrial models 310C (engine s n 299999-earlier), 315C (engine s n 299999-earlier), 340D, 344E (engine s n 300000-later), 344G, 401C (engine s n 299999-earlier), 410D, 440C, 440D (early), 444E (engine s n 299999-earlier), 444G, 448D, 450E, 450G (engine s n 299999-earlier), 455E, 455G (engine s n 299999-earlier), 490, 490E, 510B, 510C (engine s n 299999-earlier), 510D, 515B, 540B, 540D (engine s n 299999-earlier), 540E (engine s n 383839-earlier), 548D, 548E (engine s n 383839-earlier), 550, 550A (engine s n 299999-earlier), 550B (engine s n 299999-earlier), 550G (engine s n 299999-earlier), 555, 555A (engine s n 299999-earlier), 555B (engine s n 299999-earlier), 555G (engine s n 299999-earlier), 590D (engine s n 299999-earlier), 595, 595D (engine s n 299999-earlier), 610B, 610C, 650G (engine s n 299999-earlier)< li>
  • Compatible with John Deere Engine(s) 4045, 4045T, 4239A, 4239T, 4276 (diesel and turbo diesel)< li>
  • Compatible with John Deere Hay Cutting(s) 3830 (engine s n 299999-earlier)< li>
  • Replaces John Deere OEM number AR69710< li>
  • Replaces John Deere Casting number R54634< li>
  • Bolt-on weight style< li>
  • For right hand side< li> < UL> (Part No: 158784)
$105.00
Engine Balancer, Remanufactured, AR48521 -
  • For John Deere tractor models 3010, 3020 (gas)< li>
  • Replaces John Deere OEM number AR48521< li>
  • Replaces John Deere Casting number R26850< li>
  • Includes gears marked R41277 R26846, R41276 R26845, R41279 R27098, R41278< li>
  • Use with block casting numbers: R26150, R33190, R40840< li> < UL> (Part No: 207076)
$740.01
 
ASAP Cylinders - OEM Style
Cylinder Block Kit -
  • For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840< li>
  • Replaces John Deere OEM number AR73212< li> < UL> (Part No: 165066)
$1500.00
Hydraulic Rockshaft Lift Cylinder -
  • For John Deere tractor models 6145R, 6150R, 6150RH, 6155M, 6155R, 6155RH< li>
  • Replaces John Deere OEM number AL213031< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 168525)
$520.00
 
ASAP Joysticks
Turn Signal Switch / Lever -
  • For John Deere Construction & industrial models TC44H (s n 587710-later), TC54H (s n 587710-later), TC62H, 444H (s n 587710-later), 444HLL (s n 587710-later), 444J (s n 611274-earlier), 444JR, 444K, 524K, 524KII, 544H (s n 587710-later), 544HLL (s n 587710-later), 544J (s n 611799-earlier), 544K, 544KII, 624H, 624HLL, 624J, 624K, 624KII, 624KR, 644H, 644J, 644K (s n 658217-earlier), 724J, 724K, 724K (s n 658217-earlier), 744H, 744J, 744K, 824J, 824K, 844J, 844K, 844KII< li>
  • Replaces John Deere OEM number AT353427, RE160299, RE160302, YZ18984, YZ19314, YZ19489, YZ19550, YZ19684< li> < UL> (Part No: 135043)
$151.00
 
ASAP Monitors
Monitor, Remanufactured, RE56089 -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7700, 7800< li>
  • Replaces John Deere OEM number RE56089, RE66264, RE174411< li> < UL> (Part No: 210698)
$1375.01
Oil Restriction Sensor -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450 (s n 001620-later), 8650 (s n 002321-later), 8850< li>
  • Replaces John Deere OEM number A-RE156640< li>
  • For 8450 and 8650 early models, use adapter RE12330< li> < UL> (Part No: 172607)
$34.19
Performance Monitor, Remanufactured, RE24516 -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4755, 4955, 8560, 8760, 8960< li>
  • Replaces John Deere OEM number RE24516, RE66841< li> < UL> (Part No: 211166)
$1500.01
Speed Sensor -
  • For John Deere tractor models 5045E, 5050E, 5055E, 5065E, 5075E, 5076EL, 5076EN, 5078E, 5082E, 5083E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090EN, 5093E, 5093EN, 5100E, 5101E, 5101EN, 5225, 5310, 5325, 5325N, 5425, 5425H, 5425HC, 5425N, 5525, 5525N, 5603, 5625, 5625HC, 5725, 5725H, 5725HC, 6100D, 6105D, 6110D, 6115D, 6125D, 6130D, 6140D, 8130, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8320R, 8330, 8335R, 8345R, 8360R, 8430, 8530< li>
  • Replaces John Deere OEM number RE287415, RE558830, RE196310< li>
  • Length: 3.346"< li> < UL> (Part No: 174070)
$61.00
Steering Wheel Position Sensor Control -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8230T, 8295RT, 8300T, 8310RT, 8310T, 8320RT, 8320T, 8330T, 8335RT, 8345RT, 8360RT, 8400T, 8410T, 8420T, 8430T, 8520T, 9300T, 9320T, 9400T, 9420T, 9430T, 9460RT, 9510RT, 9520T, 9530T, 9560RT, 9620T, 9630T< li>
  • Compatible with John Deere Harvester(s) CH570, CH670, 3520< li>
  • Replaces John Deere OEM number RE69108< li> < UL> (Part No: 164051)
$1175.00
Transmission Oil Pressure Sensor -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8650, 8850< li>
  • Replaces John Deere OEM number RE25658< li> < UL> (Part No: 174065)
$62.00
Wheel Angle Sensor -
  • For John Deere tractor models 7630, 7730, 7830, 7930< li>
  • Replaces John Deere OEM number RE239525< li> < UL> (Part No: 164056)
$31.26
Wheel Speed Sensor -
  • For John Deere tractor models 5045E, 5055E, 5065E, 5075E, 5076E, 5076EF, 5076EL, 5076EN, 5082E, 5083E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090EN, 5093E, 5093EN, 5100E, 5101E, 5101EN, 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 5603, 5625, 6105D, 6110R, 6115D, 6120R, 6130D, 6130R, 6140D, 6140R, 6145R, 6150R, 6155R, 6155RH, 6170R, 6175R, 6190R, 6195R, 6210R, 6215R, 6425, 7200R, 7215R, 7230R, 8130, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8310R, 8310RT, 8320R, 8320RT, 8330, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8430, 8530< li>
  • Compatible with John Deere Harvester(s) CP690, CS690, 7660, 7760< li>
  • Replaces John Deere OEM number RE295929, RE558874< li> < UL> (Part No: 167865)
$32.00
 
ASAP Mounts / Isolators / Parts
Engine Isolator -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605< li>
  • Compatible with John Deere Harvester(s) 5720, 5820< li>
  • Compatible with John Deere Construction & industrial models 3200, 3215, 3220, 3400, 3415, 3420, 3800< li>
  • Replaces John Deere OEM number AL81953, AL77942< li> < UL> (Part No: 163504)
$17.50
 
ASAP Screens
Side Louver - Left Hand -
  • For John Deere tractor models SE6320 (Europe), SE6420 (Europe), SE6520 (Europe), SE6620 (Europe), SE6920 (Europe), 6215 (Europe), 6415 (South America), 6515 (Europe), 6520 (Europe), 6615 (North America), 6615 (South America), 6620 (Europe), 6715 (North America), 6820 (Europe), 6920 (Europe), 6920S (Europe), 7220 (Worldwide Edition), 7320 (Worldwide Edition), 7420 (Worldwide Edition), 7520 (Worldwide Edition)< li>
  • Replaces John Deere OEM number L157395< li>
  • Fits Left Hand Side< li>
  • For Side Louver - Right Hand use Item #: 164296< li> < UL> (Part No: 164295)
$99.00
Side Louver - Right Hand -
  • For John Deere tractor models SE6320 (Europe), SE6420 (Europe), SE6520 (Europe), SE6620 (Europe), SE6920 (Europe), 6215 (Europe), 6415 (Classic, South America), 6515 (Europe), 6520 (Europe), 6615 (North America), 6615 (Classic, South America), 6620 (Europe), 6715 (North America), 6820 (Europe), 6920 (Europe), 6920S (Europe), 7220 (Worldwide Edition), 7320 (Worldwide Edition), 7420 (Worldwide Edition), 7520 (Worldwide Edition)< li>
  • Replaces John Deere OEM number L157396< li>
  • Fits Right Hand Side< li>
  • For Side Louver - Left Hand use Item #: 164295< li> < UL> (Part No: 164296)
$102.30
Side Screen -
  • For John Deere tractor models 940 (European Edition), 1040 (European Edition), 1140 (European Edition), 2040 (Utility model, s n 350000 & later), 2150, 2240 (s n 350000 & later), 2255< li>
  • Replaces John Deere OEM number AL31253, AL56760, AL60652< li>
  • 17" x 17"< li>
  • Bottom holes are 12" center to center< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 118499)
$76.00
Side Screen - Right Hand or Left Hand -
  • For John Deere tractor models 2440, 2640 (Both s n 341000-later)< li>
  • Replaces John Deere OEM number AR91452< li>
  • Height: 17"< li>
  • Width: 17-1 8"< li>
  • Fits Right Hand and Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 123108)
$151.00
Side Screen Spring -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8450 (s n 003126-earlier), 8630, 8640, 8650 (s n 004597-earlier)< li>
  • Compatible with John Deere Construction & industrial models 700A< li>
  • Replaces John Deere OEM number R35769< li> < UL> (Part No: 122694)
$5.40
 
Belts
Belt - Alternator -
  • For John Deere tractor models 820 (Fan), 830 (Fan), 856 (Fan), 2010 (Fan), 2040 (Fan), 2150 (Fan), 2155 (Fan), 2240 (Fan), 2250 (Fan), 2255 (Fan), 2305 (Fan), 2355 (AC), 2440 (Fan), 2510 (Fan), 2520 (Fan), 2550 (AC), 2555 (AC), 2630 (Fan), 2640 (Fan), 2750 (AC), 2755 (AC), 2840 (Fan), 2855 (Fan), 2940 (AC), 2950 (AC), 2955 (AC), 3010 (Fan), 3010 (Alternator Generator), 3020 (Fan), 3020 (Alternator Generator), 3055 (AC), 3055 (Fan), 3150 (AC), 3150 (Fan), 3155 (AC), 3155 (Fan), 3255 (AC), 3255 (Fan), 4000 (Fan), 4000 (Alternator Generator), 4010 (Fan), 4010 (Alternator Generator), 4020 (AC), 4020 (Fan), 4020 (Alternator Generator), 4030 (AC), 4030 (Fan), 4040 (AC), 4040 (Fan), 4050 (AC), 4050 (Fan), 4055 (AC), 4055 (Fan), 4230 (AC), 4230 (Fan), 4240 (AC), 4240 (Fan), 4250 (AC), 4250 (Fan), 4255 (AC), 4255 (Fan), 4320 (Fan), 4430 (AC), 4440 (AC), 4450 (AC), 4455 (AC), 4520 (AC), 4555 (AC), 4560 (AC), 4620 (AC), 4630 (AC), 4640 (AC), 4650 (AC), 4755 (AC), 4760 (AC), 4840 (AC), 4850 (AC), 4955 (AC), 4960 (AC), 4960 (Fan), 5010 (AC), 5010 (Fan), 5020 (AC), 5020 (Fan), 5103 (Fan), 5105 (Fan), 5200 (AC), 5200 (Fan), 5203 (Fan), 5205 (Fan), 5210 (Fan), 5220 (AC), 5220 (Fan), 5225 (Fan), 5303 (Fan), 5310 (AC), 5310 (Fan), 5320 (AC), 5320 (Fan), 5400 (AC), 5400 (Fan), 5403 (Fan), 5410 (Fan), 5420 (AC), 5420 (Fan), 5425 (Fan), 5500 (AC), 5500 (Fan), 5510 (Fan), 5520 (Fan), 5525 (Fan), 6030 (AC), 6030 (Fan), 6110 (Fan), 6200 (AC), 6200 (Fan), 6300 (AC), 6300 (Fan), 6400 (AC), 6400 (Fan), 7020 (AC), 7020 (Fan), 7200 (Fan), 7210 (Fan), 7400 (Fan), 7405 (Fan), 7410 (Fan), 7510 (Fan), 7520 (AC), 7520 (Fan), 7600 (Fan), 7610 (Fan), 7700 (Fan), 7710 (Fan), 7800 (Fan), 7810 (Fan), 8100 (AC), 8110 (Fan), 8120 (Fan), 8200 (AC), 8210 (Fan), 8220 (Fan), 8300 (AC), 8300 (Fan), 8310 (AC), 8310 (Fan), 8320 (Fan), 8400 (AC), 8400 (Fan), 8410 (AC), 8410 (Fan), 8420 (Fan), 8430 (AC), 8430 (Fan), 8440 (AC), 8440 (Fan), 8450 (AC), 8450 (Fan), 8520 (Fan), 8560 (AC), 8560 (Fan), 8570 (AC), 8570 (Fan), 8630 (Fan), 8640 (AC), 8640 (Fan), 8650 (AC), 8650 (Fan), 8760 (AC), 8760 (Fan), 8770 (AC), 8770 (Fan), 8850 (AC), 8850 (Fan), 8870 (AC), 8870 (Fan), 8960 (AC), 8960 (Fan), 8970 (Fan), 8970 (Alternator Generator), 9100 (Fan), 9120 (Fan), 9200 (Fan), 9220 (Fan), 9300 (Fan), 9320 (Fan), 9400 (Fan), 9420 (Fan), 9520 (Fan)< li>
  • Compatible with John Deere Combine(s) 9600< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965< li>
  • Compatible with John Deere Construction & industrial models 301A (Fan), 302A (Fan), 401 (Fan), 401B (Fan), 401C (Fan), 401D (Fan)< li>
  • Replaces John Deere OEM number R73189, 17435, 17432< li>
  • OC 1 2" x 43.25" < li>
  • Thickness .331"< li> < UL> (Part No: 122454)
$5.76
Belt - Alternator -
  • For John Deere tractor models 3120, 3320, 3520, 3720, 4200, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710< li>
  • Replaces John Deere OEM number LVU11662, LVU11661< li>
  • 1 2" X 43" A-Section< li> < UL> (Part No: 123145)
$3.60
Belt - Alternator, 95 and 185 AMP -
  • For John Deere tractor models 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8520, 8520T< li>
  • Compatible with John Deere Combine(s) 9560 (s n 695301-later), 9580 (s n 695301-later), 9650 (s n 695401-later), 9650 CTS (s n 695401-later), 9660 (s n 695301-later)< li>
  • Replaces John Deere OEM number R164820< li> < UL> (Part No: 124001)
$15.26
Belt- Alternator/Generator, Set of 2, 1/2" x 67.992" -
  • For John Deere tractor models 8760, 8760 (s n 5100-earlier), 8760 (s n 5101-later), 8770, 8870< li>
  • Replaces OEM number RE37851< li>
  • Color: Black< li>
  • Length: 67.992"< li>
  • Set of 2< li>
  • Type: REC (Raw Edge Cogged)< li>
  • Width: 1 2"< li> < UL> (Part No: 197503)
$22.15
Belt - Compressor -
  • For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 7020, 7520, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600 (s n 305673-later), 6620 (s n 615041-earlier), 6622, 7700 (s n 163901-later), 7720 (s n 614501-earlier), 8820 (s n 615401-esrlier)< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5420, 5440, 5460, 5720, 5820< li>
  • Compatible with John Deere Construction & industrial models 690, 690B, 693, 693B, 744, 744E, 750, 755< li>
  • Replaces John Deere OEM number R71603, 17415< li>
  • Length: 41.5"< li>
  • Width: 1 2"< li>
  • Thickness: .303"< li>
  • Material: polyester cord< li>
  • Belt type: raw edge laminate< li>
  • Color: black< li> < UL> (Part No: 114010)
$6.00
Belt- Deck -
  • For John Deere tractor models 2027R (62" Deck), 2032R (62" Deck), 2210 (54C), 2305 (54C), 2320 (62" Deck), 2520 (62" Deck), 2720 (62" Deck), 4115 (62" Deck), 4210 (54C), 4310 (54C), 4410 (54C)< li>
  • Compatible with John Deere Lawn & Garden(s) X465, X475, X485, X495, X575, X585, X595, X700, X720, X724, X728, X740, X744, X748, X749, X750, X754, X758< li>
  • Replaces John Deere OEM number M141627< li>
  • Color: White< li>
  • Length: 119.4"< li>
  • Width: 5 8"< li>
  • Thickness: .538"< li>
  • Material: Aramid Cord< li>
  • Type: Double Angle BB Aramid Cord< li> < UL> (Part No: 182015)
$57.00
Belt - Fan -
  • For John Deere tractor models 3010 (Diesel), 3020 (Diesel with s n 123000-earlier), 4000 (Gas), 4010 (Diesel), 4020 (Diesel s n 201000-earlier), 4230 (Gas)< li>
  • Replaces John Deere OEM number R41681< li>
  • Polyester Cord< li>
  • Length: 56.25"< li>
  • Width: .5"< li> < UL> (Part No: 114001)
$8.00
Belt - Fan -
  • For John Deere tractor models 4020 (Diesel, w o air s n 200999-earlier), 4020 (Gas, LP Gas w o air, s n 200999-earlier), 4030 (s n 7170-earlier), 4030 (s n 7171-earlier)< li>
  • Replaces John Deere OEM number R46113, 17591, 17590< li>
  • 1 2" X 59.25"< li>
  • Hydraulic pump coupler bushing (4) use Item #: 114098< li> < UL> (Part No: 114002)
$11.26
Belt - Fan -
  • For John Deere tractor models 2030 (Gas), 2510, 2520, 2630, 2640< li>
  • Replaces John Deere OEM number 22515, 22514, HB0515, T24473< li>
  • Color: Black< li>
  • Length: 52.25"< li>
  • Width: 0.688"< li>
  • Thickness: 0.438"< li>
  • Material: Polyester Cord< li>
  • Type: REL (Raw Edge Laminate)< li>
  • Hydraulic pump coupler bushings (4) use Item #: 113925< li> < UL> (Part No: 122103)
$13.00
Belt - Fan -
  • For John Deere tractor models 2940, 2950< li>
  • Replaces John Deere OEM number R73785, CDX14021A, VPE6029< li>
  • .688" X 58.25"< li> < UL> (Part No: 152597)
$15.76
Belt - Fan -
  • For John Deere tractor models 4120, 4320, 4520, 4720< li>
  • Replaces John Deere OEM number R515222< li>
  • Replaces manufacturer number 923K6< li>
  • Number of ribs: 6< li>
  • Outside length: 92.93"< li>
  • Pitch Length: 92.3"< li> < UL> (Part No: 161623)
$18.00
Belt - Fan -
  • For John Deere tractor models 2355 (with viscous drive), 2555 (with viscous drive), 2755 (with viscous drive), 2855N (with viscous drive)< li>
  • Replaces John Deere OEM number R87153< li>
  • Belt Type: Raw Edge Cogged< li>
  • Length: 55.5"< li>
  • Width: .64"< li>
  • Thickness: .43"< li>
  • Material: Polyester Cord< li> < UL> (Part No: 181998)
$9.46
Belt - Fan -
  • For John Deere tractor models 8130, 8210T, 8225R (SN: 120000 - Later), 8225R (SN: 016001 - 090000), 8230, 8230T, 8245R (SN: 090001 - Later), 8260R (SN: 016001 - 090000), 8270R (SN: 000101 - 53099, 100000 - Later, Engine 6090HBM-02, -03, -04, -06), 8285R (SN: 016001 - 090000), 8295R (SN: 000101 - 53099, 100000 - Later, Engine 6090HBM-02, -03, -04, -06), 8295RT (SN: 900101-907100), 8310R (SN: 016001 - 090000), 8310RT (SN: 902501 - 912000), 8320R (SN: 000101 - 53099, 100000 - Later, Engine 6090HBM-02, -03, -04, -06), 8320RT (SN: 090001 - Later), 8330, 8330T, 8335R (SN: 016001 - 090000), 8335R (SN: 090001 - Later), 8335RT (SN: 902501 - 912000), 8345R (SN: 000101 - 53099, 100000 - Later, Engine 6090HBM-02, -03, -04, -06), 8345RT (SN: 090001 - Later), 8360R (SN: 120000 - Later), 8360R (SN: 902501 - 912000), 8360RT (SN: 902501 - 912000), 8370R (SN: 015000 - Later, Engine 6090HBM-02, -03, -04, -06), 8370RT (SN: 090001 - Later), 8400R (Engine 6090HBM-07)< li>
  • Replaces John Deere OEM number R222393, R568198< li>
  • Type: Variable Speed< li> < UL> (Part No: 196625)
$45.98
Belt - Fan -
  • For John Deere Construction & industrial models 120 (s n 7653-earlier), 200LC (s n 830633-earlier), 230LC (s n 829272-earlier), 230LCR (s n 829272-earlier), 230LCRD (s n 829272-earlier), 270LC, 335, 335C, 435, 435C, 437C, 690ELC (s n 704569-later)< li>
  • Replaces John Deere OEM number A-R123437, DZ119060< li>
  • Color: Black< li>
  • Length: 61.75"< li>
  • Material : Polyester Cord< li>
  • Thickness: 0.18"< li>
  • Type: B Section Special< li>
  • Width: 8 Rib< li> < UL> (Part No: 196984)
$42.75
Belt - Fan -
  • For John Deere Construction & industrial models 120 (s n 151709-later), 120C, 160C LC, 230LCR, 230LCRD, 310E, 310SE, 315SE, 2054 (s n 200270-later), 2554 (s n 200131-later)< li>
  • Replaces John Deere OEM number DZ119515< li>
  • Replaces OEM number R123442< li>
  • Color: Black< li>
  • Length: 63"< li>
  • Material: Polyester Cord< li>
  • Thickness: 0.18"< li>
  • Type: K Micro Rib< li>
  • Width: 8 Rib< li> < UL> (Part No: 197164)
$43.18
Belt - Fan -
  • For John Deere tractor models 7820 (8.1L With Viscous Fan), 7920 (8.1L With Viscous Fan)< li>
  • Replaces John Deere OEM number R269531, R181918< li>
  • Type: K EPMD (Serpentine)< li>
  • Length: 107.75"< li>
  • Ribs: 8< li>
  • Thickness: .177"< li>
  • Material: Polyester Cord< li> < UL> (Part No: 198548)
$54.56
Belt, Fan -
  • For John Deere tractor models 6200, 6300, 6400, 6500< li>
  • Replaces John Deere OEM number L110605< li>
  • 8 rib polyester cord< li>
  • Length: 86-13 16"< li> < UL> (Part No: 168115)
$24.00
Belt - Fan, 0.688" x 61.25" -
  • For John Deere tractor models 2955, 3055, 3255< li>
  • Replaces OEM number R87152< li>
  • Length: 61.25"< li>
  • Width: 0.688"< li> < UL> (Part No: 198068)
$20.63
Belt - Fan, 2 Pack -
  • For John Deere tractor models 4430, 4630, 7020, 8450< li>
  • Replaces John Deere OEM number AR57266< li>
  • 1 2" X 63.625" REL< li>
  • Set of 2< li> < UL> (Part No: 123144)
$13.00
Belt - Fan / Alternator -
  • For John Deere tractor models 7210, 7410, 7510< li>
  • Compatible with John Deere Combine(s) 9860 STS, 9870 STS< li>
  • Replaces John Deere OEM number R503505< li>
  • Type: K Micro Rib< li>
  • Length: 85.63"< li>
  • Thickness: .184"< li>
  • Ribs: 8< li>
  • Material: Polyester Cord< li> < UL> (Part No: 123816)
$43.26
Belt - Fan / Alternator -
  • For John Deere tractor models SE6120, SE6210, SE6220, SE6320, SE6410, SE6420, SE6510, SE6520, 6120, 6210, 6215, 6220, 6405, 6410, 6415, 6420, 6510, 6520, 6520L< li>
  • Replaces John Deere OEM number L114489, 4080760, 5080760, 760K8, 8PK1928, 8PK1929, 8PK1930, 8PK1931, 8PK1932, K080760< li>
  • 76.75" Outside length< li>
  • 8 Ribs< li>
  • Micro-Rib< li> < UL> (Part No: 154423)
$19.26
Belt - Fan Drive -
  • For John Deere tractor models 7600, 7700, 7800< li>
  • Compatible with John Deere Harvester(s) 9935 (s n 4001-later)< li>
  • Replaces John Deere OEM number R95924< li>
  • Color: Black< li>
  • Length: 90.276"< li>
  • Material: Polyester Cord< li>
  • Thickness: 0.177"< li>
  • Type: K Micro Rib< li>
  • Width: 8 Rib< li> < UL> (Part No: 167943)
$56.00
Belt - Fan/ Drive -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number R157686< li>
  • Type: K Micro Rib< li>
  • Length: 38.6"< li>
  • Thickness: 0.198"< li>
  • Width: 14 Rib< li>
  • Material: Polyester Cord< li> < UL> (Part No: 169232)
$33.76
Belt - Fan Drive, 1 1/2" x 55.9" -
  • For John Deere tractor models 9420R (Variable Speed Fan), 9460R, 9460RT, 9470R, 9470RT, 9470RX, 9510R, 9510RT, 9520R, 9520RT, 9520RX, 9560R, 9560RT< li>
  • Compatible with John Deere Harvester(s) CP690, CS690, 7760< li>
  • Replaces OEM number R300399< li>
  • Color: Black< li>
  • Length: 55.9"< li>
  • Material: Aramid Cord< li>
  • Thickness: .67"< li>
  • Type: REC (Raw Edged Cogged)< li>
  • Width: 1.500"< li> < UL> (Part No: 197520)
$76.23
Belt - Fan Drive, 57" x .018" -
  • For John Deere tractor models 9220 (s n 020218-later), 9320 (s n 020220-earlier), 9320T, 9420 (s n 020220-earlier), 9420T, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number R205438< li>
  • 57" x .018"< li>
  • Color: Black< li>
  • Length: 57"< li>
  • Material: Polyester Cord< li>
  • Thickness: 0.18< li>
  • Width: 12 Rib< li> < UL> (Part No: 165158)
$23.76
Belt - Fan, Set of 2 -
  • For John Deere tractor model 4630< li>
  • Replaces John Deere OEM number AR54592< li>
  • 1 2" X 62.5"< li>
  • Set of 2< li> < UL> (Part No: 123143)
$13.40
Belt - Fan, Set of 2 -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Replaces John Deere OEM number RE41942< li>
  • Type: REC (Raw Edge Cogged)< li>
  • Quantity: 2< li>
  • Length: 65.8"< li>
  • Width: 1 2"< li>
  • Thickness: .371"< li>
  • Material: Polyester Cord< li> < UL> (Part No: 123153)
$13.48
Belt - Fan, Set of 2 -
  • For John Deere tractor models 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 690B, 693B< li>
  • Replaces John Deere OEM number AR53099< li>
  • Type: Automotive< li>
  • Quantity: 2< li>
  • Length: 65"< li>
  • Width: 1 2"< li>
  • Material: Polyester Cord< li> < UL> (Part No: 182116)
$18.50
Belt - Fan, Set of 2 -
  • For John Deere tractor models 4320, 4520 (s n 303518-earlier)< li>
  • Replaces John Deere OEM number AR43219< li>
  • Color: Black< li>
  • Length: 60.25< li>
  • Material: Polyester Cord< li>
  • Set Quantity: 2< li>
  • Type: REC< li>
  • Width: 1 2< li> < UL> (Part No: 196920)
$28.39
Belt - Fan, Set of 2 -
  • For John Deere tractor models 4520 (SN: 303519 - Later), 4620, 7020 (SN: 335845 - Earlier)< li>
  • Replaces John Deere OEM number AR51059< li>
  • Type: Automotive< li>
  • Quantity: 2< li>
  • Length: 61.5"< li>
  • Width: .531"< li>
  • Thickness: .354"< li>
  • Material: Polyester Cord< li> < UL> (Part No: 199294)
$32.18
Belt-Fan, Set of 2 -
  • For John Deere Construction & industrial models 310C, 315C, 340D, 440D, 444, 444CH, 444D, 448D, 540, 540A, 540B, 540D, 544, 544A, 544C, 544D, 548D, 640, 640D, 648D, 670< li>
  • Replaces John Deere OEM number AT24833< li>
  • Type: Automotive< li>
  • Quantity: 2< li>
  • Length: 57.27"< li>
  • Width: .531"< li>
  • Thickness: .354"< li>
  • Material: Polyester Cord< li> < UL> (Part No: 196661)
$17.12
Belt - Fan, Set of 2, 0.438" x 61.625" -
  • For John Deere tractor models 4320, 4520, 4620, 5010, 5020, 6030, 7020< li>
  • Replaces John Deere OEM number A-15630, AR56638< li>
  • 0.438" x 61.625"< li>
  • Color: Black< li>
  • Width: 0.453"< li>
  • Set of 2< li> < UL> (Part No: 168050)
$17.33
Belt - Fan with Hydraulic Belt Tensioner -
  • For John Deere tractor models 6100 (s n 106163-earlier), 6200 (s n 159438-earlier), 6300 (s n 106163-earlier), 6400 (s n 159438-earlier), 6506 (Europe, s n 159438-earlier), 6600 (Europe, s n 159438-earlier)< li>
  • Replaces John Deere OEM number L111170< li>
  • Color: Black< li>
  • Length: 87.598"< li>
  • With: 8 Rib< li>
  • Thickness: 0.200"< li>
  • Material: Polyester Cord< li>
  • Type: K Micro Rib< li> < UL> (Part No: 167851)
$46.90
Belt, Platform Drive, Mower - .5 inch X 103.3 inch (2623.82) John Deere RIDING MOWER: For tractor models LA100, LA105, LA110, LA115, LA120, LA125, L100, L105, L107, L108, L110, L111, L118, L17.542, L1742, 102, 108-14.5, 108-17HS, 115, 125. Replaces GX20072 (Part No: 182549)$21.00
Belt - Side Draper -
  • For John Deere tractor model 630 (FD s n 785000-later)< li>
  • Replaces John Deere OEM number AXE31445< li>
  • Fits Left Hand Or Right Hand Side< li>
  • Length: 295"< li>
  • Width: 39.93"< li>
  • Plies: 1 < li>
  • Guide Style: V< li> < UL> (Part No: 165515)
$1875.00
Belt, Traction Drive, Mower - .5 inch X 88.9 inch (2258.06) John Deere RIDING MOWER: For tractor models LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA165, LA175, L105, L107, L108, L110, L111, L118, L120, L130, L17.542 (Part No: 172377)$14.76
Belt - Water Pump / Alternator -
  • For John Deere tractor models 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2750, 3120, 5103, 5104, 5200, 5203, 5204, 5300, 5400< li>
  • Compatible with John Deere Hay Cutting(s) 3430, 3830< li>
  • Replaces John Deere OEM number R73784, CDX14020A< li>
  • .688" x 53.3" REC< li> < UL> (Part No: 122104)
$15.00
Deck Belt -
  • For John Deere tractor models 2210, 2305, 4010, 4110, 4115, 4210, 4310, 4410, 4510, 4610, 4710< li>
  • Compatible with John Deere Lawn & Garden(s) X465 (s n 30000-later), X475 (s n 30000-later), X485 (s n 30000-later), X495 (s n 30000-later), X575 (s n 30000-later), X585 (s n 30000-later), X595 (s n 30000-later), X700 (s n 30000-later), X720 (s n 30000-later), X740 (s n 30000-later), X744 (s n 30000-later), X748 (s n 30000-later), X749 (s n 30000-later)< li>
  • Replaces John Deere OEM number M142997< li>
  • Length: 129.4"< li>
  • Width: 5 8"< li>
  • Thickness: .58"< li>
  • Color: Black< li>
  • Material: Aramid Cord< li>
  • For 62" Deck< li> < UL> (Part No: 182010)
$63.00
Deck Belt -
  • For John Deere tractor models 655, 755, 855, 955< li>
  • Compatible with John Deere Lawn & Garden(s) 420, 430< li>
  • Replaces John Deere OEM number M140021< li>
  • For 60" Decks< li>
  • Length: 114"< li>
  • Width: 5 8"< li>
  • Thickness: .541"< li>
  • Color: Black< li>
  • Material: Aramid Cord< li>
  • Belt Type: Double Angle BB< li> < UL> (Part No: 182020)
$43.50
Deck Drive Belt -
  • For John Deere tractor models 1023E, 1025R, 1026R< li>
  • Replaces John Deere OEM number LVU21854< li>
  • Color: Black< li>
  • Length: 122.2"< li>
  • Material: Kevlar Cord< li>
  • Thickness: .527"< li>
  • Type: Double Angle BB< li>
  • Width: .625"< li> < UL> (Part No: 164972)
$66.00
Deck Drive Belt -
  • For John Deere tractor models 2032R, 2038R, 3033R, 3038R, 3039R, 3045R, 3046R, 4010, 4100, 4115, 4200, 4210, 4300, 4400, 4500, 4600, 4700< li>
  • Replaces John Deere OEM number M136137< li>
  • Color: Black< li>
  • Length: 145.354"< li>
  • Material: Kevlar Cord< li>
  • Thickness: .426"< li>
  • Type: Wrapped< li>
  • Width: .625"< li> < UL> (Part No: 164973)
$48.26
Deck Drive Belt -
  • For John Deere tractor models 2210 (60" Deck), 4010 (60" Deck), 4100 (60" Deck), 4110 (60" Deck), 4115 (60" Deck), 4210 (60" Deck), 4310 (60" Deck), 4400 (60" Deck), 4410 (60" Deck)< li>
  • Compatible with John Deere Lawn & Garden(s) F911 (60" Deck), F912 (60" Deck), F915 (60" Deck), F930 (60" Deck), F932 (60" Deck), F935 (60" Deck), F1145 (60" Deck)< li>
  • Replaces John Deere OEM number M117636< li> < UL> (Part No: 164975)
$38.35
Engine Belt -
  • For John Deere tractor models 2520, 3005, 3032E, 3036E< li>
  • Compatible with John Deere Lawn & Garden(s) 1600, 1620< li>
  • Compatible with John Deere Turf Golf(s) 3325, 3365< li>
  • Replaces John Deere OEM number 72086< li>
  • Length: 39.4"< li>
  • Width: 1 2"< li>
  • Thickness: .312"< li>
  • Color: Black< li>
  • Material: Aramid Cord< li>
  • Belt Type: Raw Edge Laminate< li> < UL> (Part No: 182184)
$11.50
Mower Deck Belt -
  • For John Deere tractor models 2032R (72" Mower Deck), 2038R (72" Mower Deck), 2210 (72" Mower Deck), 3033R (72" Mower Deck), 3038R (72" Mower Deck), 3039R (72" Mower Deck), 3045R (72" Mower Deck), 3046R (72" Mower Deck), 3120 (72" Mower Deck), 3320 (72" Mower Deck), 3520 (72" Mower Deck), 3720 (72" Mower Deck), 4010 (72" Mower Deck), 4110 (72" Mower Deck), 4115 (72" Mower Deck), 4120 (72" Mower Deck), 4310 (72" Mower Deck)< li>
  • Replaces John Deere OEM number M149866< li>
  • Color: Black< li>
  • Length: 160.835"< li>
  • Material: Kevlar Cord< li>
  • Thickness: .594"< li>
  • Type: Wrapped< li>
  • Width: .875"< li> < UL> (Part No: 164974)
$100.00
V-Belt, Fan -
  • For John Deere Construction & industrial model 210LJ< li>
  • Replaces John Deere OEM number R123457< li>
  • Color: Black< li>
  • Length: 65.2"< li>
  • Material: Polyester Cord< li>
  • Metric Code: 8PK1656< li>
  • Number of Ribs: 8< li>
  • Outside Length: 65.83"< li>
  • Pitch Length: 65.2"< li>
  • Thickness: 0.18< li> < UL> (Part No: 169655)
$17.26
V-Belt, Micro-Rib -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number R124785, R157687< li>
  • 8 Rib x 49.6" K Micro Rib Polyester Cord< li>
  • Color: Black< li>
  • Length: 49.6"< li>
  • Material: Polyester Cord< li>
  • Metric Code: 8PK1260< li>
  • Number of Ribs: 8< li>
  • Outside Length: 50.23"< li>
  • Pitch Length: 49.6"< li>
  • Thickness: .18"< li>
  • Type: K Micro Rib< li>
  • Width: 8 Rib< li> < UL> (Part No: 169908)
$11.40
 
Brakes
Brake Actuating Disc -
  • For John Deere tractor models 1640, 2040, 2120, 2140, 2550 (all w Heavy Duty Final Drive), 2750< li>
  • Replaces John Deere OEM number L33910< li> < UL> (Part No: 105611)
$109.10
Brake Actuating Disc -
  • For John Deere tractor models 5045D, 5045E, 5055E, 5065E, 5075E, 5076E, 5076EF, 5076EL, 5082E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5100E, 5101EN, 5103 (North American Edition), 5200, 5203 (North American Edition), 5210, 5220, 5225, 5300, 5303 (North American Edition), 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5415, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5605, 5615, 5705, 5715, 5725< li>
  • Compatible with John Deere Construction & industrial models 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number L77358< li>
  • ID: 9.528"< li>
  • OD: 13.642"< li>
  • Thickness: .234"< li>
  • Tabs: 3< li> < UL> (Part No: 128178)
$45.00
Brake Actuating Disc -
  • For John Deere tractor models 5200 (s n 620187-earlier), 5300 (s n 630344-earlier), 5400 (s n 640541-earlier), 5500 (s n 650437-earlier), 5600 (South American s n 02238-earlier), 5700 (South American s n 02238-earlier)< li>
  • Replaces John Deere OEM number L77359< li>
  • ID: 9.506"< li>
  • OD: 12.213"< li>
  • Thickness: .234"< li>
  • Tabs: 6< li> < UL> (Part No: 128180)
$55.00
Brake Actuating Disc -
  • For John Deere tractor models 1830 (s n 301446-later), 2040, 2240, 2350, 2550< li>
  • Replaces John Deere OEM number L33483< li>
  • 12.044" O.D.< li>
  • 8.663" I.D.< li> < UL> (Part No: 160347)
$143.00
Brake Actuating Disc -
  • For John Deere tractor models 5045D, 5103, 5103E, 5103S, 5104, 5105, 5203, 5204, 5205< li>
  • Replaces John Deere OEM number L116596< li> < UL> (Part No: 162610)
$33.26
Brake Actuating Disc -
  • For John Deere tractor models 2951, 2955, 3050, 3055, 3150, 3155, 3255, 3350, 3351, 3650, 3651< li>
  • Replaces John Deere OEM number L65164, L60889, L63946< li>
  • Inside Diameter: 8.66"< li>
  • Outside Diameter: 12.12"< li>
  • Width: 1.89"< li> < UL> (Part No: 163743)
$237.00
Brake Actuating Disc - 21.5mm -
  • For John Deere tractor models SE6100 (s n 195321-earlier), SE6200 (s n 195321-earlier), SE6300 (s n 195321-earlier), SE6400 (s n 195321-earlier), 6100 (s n 116380-195321), 6200 (s n 116380-195321), 6200L (s n 116380-195321), 6300 (s n 195321-earlier), 6300L (s n 195321-earlier), 6400 (s n 195321-earlier), 6400L (s n 195321-earlier), 6400SP, 6500 (s n 195321-earlier), 6500L (s n 195321-earlier), 6506 (s n 195321-earlier), 6600 (s n 195321-earlier)< li>
  • Replaces John Deere OEM number L114091, L75651, L112757< li>
  • Width: 21.5mm (.846")< li>
  • I.D.: 8.74"< li>
  • O.D.: 12.913" (less tangs 12.441")< li>
  • 3 Tangs< li> < UL> (Part No: 140540)
$165.00
Brake Actuating Plate -
  • For John Deere tractor models 1830 (s n 301446 - later), 2040 (s n 205840 - later), 2150, 2240 (s n 305314 - later), 2255, 2350, 2355, 2355N (s n 713944 - earlier), 2550, 2555, 2755 (s n 713944 - earlier), 2855, 2855N (s n 713944 - earlier), 2955 (s n 713796 - earlier), 3155 (s n 713796 - earlier)< li>
  • Replaces John Deere OEM number L33497, L56247< li>
  • Outside Diameter: 12.170"< li>
  • Inside Diameter: 8.355"< li> < UL> (Part No: 151860)
$90.00
Brake Actuating Plate -
  • For John Deere tractor models 2355N (s n 713945-later), 2550, 2555 (s n 713945-later), 2750, 2755 (s n 713945-later), 2840, 2855N (s n 713945-later), 2940, 2950, 2955 (s n 713797-later), 3055, 3155 (s n 715796-later), 3255< li>
  • Replaces John Deere OEM number L55004, L33481< li>
  • Outer Diameter: 12.170"< li>
  • Inner Diameter: 8.670"< li> < UL> (Part No: 155488)
$101.00
Brake Actuating Spring - Used with brake discs. For tractor models MT, 40, 320, 330, 420, 430, 435, 440, 1010, 2010. Replaces: M831T (Part No: 116863)		$7.99
Brake Backing Plate with Facings -
  • For John Deere tractor models 4000, 4020, 4055, 4230, 4255, 4430, 4455< li>
  • Compatible with John Deere Construction & industrial models 544B, 644D, 644E, 646B (s n 223645-later), 646C, 762B< li>
  • Replaces John Deere OEM number RE46332, AR54699< li>
  • Replaces John Deere Casting number R60116, R79409, R93130, R97786< li>
  • For Brake Disc use Item #: 105609< li> < UL> (Part No: 158976)
$186.00
Brake Band - Also Replaces AL38213 and AT19833. Price is for 1 band. For construction models: 210C, 300, 301, 302, 310, 315, 401, 410, 415, 480, 510, 515. For tractor models: 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750. (Part No: At176621)$154.00
Brake Band - Right Hand or Left Hand -
  • For John Deere Construction & industrial models 450C, 450D, 450E, 450G, 455D, 455E, 455G, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 650G< li>
  • Replaces John Deere OEM number AT104901, AT141619, AT142175, AT40441< li>
  • 2-1 2" Wide< li>
  • Fits Left and Right Hand Side< li> < UL> (Part No: 165465)
$380.00
Brake Band with Lining - For model D SN# 30400 to 109943 (Part No: 179473)		$164.00
Brake Band with Lining -
  • For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040 (s n 350000-later), 2120, 2130, 2140, 2141, 2150, 2155, 2240 (s n 350000-later), 2250, 2251, 2255, 2350, 2355, 2355N, 2440 (s n 341000-later), 2450, 2550, 2555, 2640 (s n 341000-later), 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N< li>
  • Compatible with John Deere Construction & industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415, 415B, 480C, 510B, 510C, 510D, 515, 515B< li>
  • Replaces John Deere OEM number AT176621, AT19833, AT65876, AL38213< li> < UL> (Part No: 127158)
$154.00
Brake Bushing - This bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Used as a brake or clutch pedal bushing on the following models: 4030, 4040, 4050, 4055, 4230, 4255, 4240, 4430, 4440, 4455, 4630, 4640, 4650, 4840, 4850, 8020, 8430, 8630. Replaces R51192. (Part No: 126143)		$10.16
Brake/Clutch Pedal Return Spring -
  • For John Deere tractor models L (Clutch for Styled Models s n 640000-later), LA (Clutch), LI (Clutch), 40 (Brake for Crawler only), 420 (Brake for Crawler s n 100000-earlier)< li>
  • Replaces John Deere OEM number L4223T< li>
  • Length 5-1 4"< li>
  • Body Diameter .750< li>
  • Wire Diameter .093< li> < UL> (Part No: 125748)
$13.89
Brake Disc - For JD 1010, 40, 420, 430, MT. Brake Disc - 21 Spline 5 inch dia. Riveted or bonded depending on availability. (Part No: 105601)		$34.95
Brake Disc - 21 internal splines, 5.640 inch O.D.. For model 2010 RC or RC utility. (Part No: 108136)		$22.00
Brake Disc - 12" O.D., 15 spline. For tractor models (1640, 2040 with heavy duty final drive and above SN# 370493), (2040S, 2140 SN# 370493 and up), (2130, 2550 with heavy duty final drive), (2355N, 2555, 2755, 2855N SN# up to 668664), 2750, (2840 SN# 305025 and up), 2940, 2950, (2955, 3155 SN# up to 669173). Replaces AL30096, AL38236. (Part No: 126031)$78.00
Brake Disc - Rivited. Bonded available - call. For tractor models 1010, 320, 330, 40, 420, 430. Brake Disc. 25 spline, 5" O.D., .5625" thick. Replaces AT13068. (Part No: 105600)		$36.26
Brake Disc -
  • For John Deere tractor models 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450< li>
  • Replaces John Deere OEM number AR66749, AR72373< li>
  • Riveted linings (pads) are not included< li> < UL> (Part No: 105609)
$254.30
Brake Disc -
  • For John Deere tractor models 8100, 8200, 8300, 8400, 9100 (s n 053317-earlier), 9200 (s n 053317-earlier), 9300 (s n 053317-earlier), 9400 (s n 053317-earlier)< li>
  • Replaces John Deere OEM number RE154280, RE46460< li>
  • Outer Diameter: 16.75"< li>
  • Splines: 14< li> < UL> (Part No: 105610)
$121.00
Brake Disc -
  • For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6210, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 6010, 6105M, 6110, 6110L, 6115M, 6120, 6125, 6125M, 6130, 6130M, 6140M, 6150M, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6225, 6230, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6325, 6330, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6420, 6420L, 6425, 6430, 6500, 6500L, 6505, 6506, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6525, 6530, 6534, 6610, 6615, 6620, 6630, 6715, 7130, 7230< li>
  • Replaces John Deere OEM number AL111498, AL75434< li>
  • Internal Splines: 14< li>
  • O.D.: 12-1 4"< li>
  • Thickness: .192"< li>
  • Spline Count: 14< li> < UL> (Part No: 127039)
$94.00
Brake Disc -
  • For John Deere tractor models 5055E, 5065E, 5075E, 5078E, 5085E, 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5310, 5310N, 5320, 5320N, 5400, 5400N, 5403, 5410, 5415, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5605, 5615, 5625, 5705, 5715, 5725, 5725N< li>
  • Replaces John Deere OEM number AL76887, AL162808, SJ17870< li>
  • Teeth: 14< li>
  • Diameter: 12"< li> < UL> (Part No: 127040)
$85.00
Brake Disc -
  • For John Deere tractor models 3120, 3320, 3520, 3720, 4105< li>
  • Replaces John Deere OEM number LVU803908, LVU801669< li>
  • Lining ID: 4.000"< li>
  • Lining OD: 5.801"< li>
  • Spline DIA Major: 1.200"< li>
  • Spline DIA Minor: 1.066"< li>
  • Spline Count: 16< li> < UL> (Part No: 128181)
$49.70
Brake Disc -
  • For John Deere tractor models 4120, 4200, 4210, 4300, 4310, 4400, 4410< li>
  • Replaces John Deere OEM number YZ80748< li>
  • ID: 1.416"< li>
  • OD: 6.015'< li>
  • Thickness: .127"< li> < UL> (Part No: 128182)
$59.90
Brake Disc -
  • For John Deere Construction & industrial models 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number AT179503< li>
  • I.D. 2.117"< li>
  • .224" Thick< li>
  • 15 Tooth< li>
  • O.D. 9.15" < li> < UL> (Part No: 151114)
$39.00
Brake Disc -
  • For John Deere Construction & industrial models 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number T161233< li>
  • ID: 6" (153mm)< li>
  • OD: 9-9 16" (243mm)< li>
  • 81 Teeth< li> < UL> (Part No: 155529)
$67.00
Brake Disc -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520< li>
  • Replaces John Deere OEM number RE204407< li>
  • ID. 2-7 8" (73mm)< li>
  • OD: 16-7 8" (427mm)< li>
  • 14 Teeth< li> < UL> (Part No: 159704)
$111.30
Brake Disc -
  • For John Deere tractor models 2510 (Row Crop), 2520 (Row Crop)< li>
  • Compatible with John Deere Construction & industrial models 540B< li>
  • Replaces John Deere OEM number R38615, R38073, R73644< li>
  • 13-1 8" Diameter< li>
  • 15 Teeth< li>
  • 2.850" Minor Inside Diameter< li>
  • 3.575" Major Inside Diameter< li> < UL> (Part No: 160779)
$103.00
Brake Disc Compression Spring -
  • For John Deere tractor models 6105M, 6110M, 6120M, 6130M, 6140M, 6145M, 6175M, 6195M, 6200, 6220L, 6230, 6300, 6300L, 6330, 6400, 6400L, 6430, 6500, 6500L, 6515, 6715, 7230< li>
  • Replaces John Deere OEM number AL181918, AL115529< li> < UL> (Part No: 169946)
$17.00
Brake Gasket -
  • For John Deere tractor models B (s n 232468-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2743R< li> < UL> (Part No: 154791)
$7.30
Brake Housing Gasket. - Fits John Deere - A (sn: 584000 & up), [AO, AR (sn: 272000 & up)], [60, 620, 630 (No Hi-Crop)]; Replaces: A3789R (Part No: 178585)		$7.56
Brake Lining - Set of 4 Shoe Linings with 40 rivets. For tractor models 720, 730, 80, 820, 830 all except hi-crop. (Part No: 105621)$28.49
Brake Lining Kit - Fits R, 70, 80, 520, 530, 620, 630. Does NOT fit High-Crop Models. Includes: 4 linings with 40 rivets. 10-1 2" Outer Curvature, 2-1 4" Wide. Replaces: RE227939, AR604R (Part No: 113312)		$42.50
Brake Lining Kit - Set of 4 Linings with Rivets For H. Replaces: AH1155R (Part No: 125741)		$38.95
Brake Linings with Rivets - Fits M, MI. Please note: if your lining is bonded instead of riveted you will have to drill rivet holes. Sold in pairs. These are 6 inch outside diameter and 2.140 inside diameter. They are .191 inches thick. The outside diameter of the rivet is .182 inch and the rivet hole diameter is .198 inch. Replaces: AM695T. (Part No: 126329)		$34.95
Brake Linings With Rivets - For 60, 620 HI-CROP, 620 ORCHARD, 630 HI-CROP, 630 ORCHARD, 70 HI-CROP, 720 HI-CROP, 730 HI-CROP, A AFTER SN# 410000, AO AND AR AFTER SN# 250000, G, GH, GN, GW. Brake Linings with rivets. Includes (4) linings and 32 rivets. (Part No: 105603)		$26.76
Brake Lock Spring -
  • For John Deere tractor models 40 (High Crop), 320, 330, 420 (High Crop), 430 (Standard), 1010 (Orchard)< li>
  • Replaces John Deere OEM number M2221T< li>
  • 2" Overall Length< li> < UL> (Part No: 125743)
$8.36
Brake Master Cylinder - This Brake Master Cylinder fits John Deere Tractors; 1640 serial 430000 and up, 2040 serial number 430000 and up, 2140 serial number 430000 and up, 2350, 2550, 2750, 2940, 2950, 3040 serial number 430000 and up, 3140 serial number 430000 and up. Replaces AL34743 (Part No: 149796)		$124.00
Brake Oil Seal - This brake oil seal has a 1.5 inch Inside Diameter, a 1.987 inch Outside Diameter and is .313 inch wide. It Fits: 520, 530, 620, 630, 720, 730. Replaces: AF2788R, AR20149R, CR14832 (Part No: 168618)		$19.76
Brake Operating Rod Guide -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4010 (s n 20200-later), 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 (Model Year 1974-1981), 8440, 8450, 8460, 8520, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number R52169, R31457< li> < UL> (Part No: 170005)
$16.26
Brake Pad - 3" x 7", pads have steel center plate, sold individually. For tractor models 4010, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 8430, 8440, 8450, 8630, 8640, 8650, 8850. (Part No: 105608)		$14.00
Brake Pad -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number R90090, AR38048, R38024< li>
  • Requires 4 Rivets - Not Included< li>
  • For rivets use Item #: 111444< li> < UL> (Part No: 111362)
$16.26
Brake Pad -
  • For John Deere tractor models 2510, 2520, 3010, 3020 (s n 122999-earlier), 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Replaces John Deere OEM number AR28487, R26969, R90085< li>
  • 2-1 2" X 6-1 2"< li>
  • Mounting rivets not included< li>
  • 6 pads required per side, 12 total for tractor< li> < UL> (Part No: 165736)
$20.00
Brake Pad, Disc/Rotor Type Brakes - For tractor models 4010, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850. 3" x 7" Pad. Friction Material only, does not include backing plate or rivets. Sold in lots of 3, price per pad. (Part No: 110700)		$17.70
Brake Pad Rivets -
  • For John Deere tractor models 3010, 4000 (Hi-Crop), 4010, 4020 (Hi-Crop), 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 570, 570A, 644A, 644B, 700A, 743A, 760A, 860< li>
  • Replaces John Deere OEM number D2593R< li>
  • Package Contains 18 Rivits< li>
  • 0.135" Diameter< li>
  • 0.671" (43 64") Long< li>
  • Most brake pads require 6 rivets per pad< li> < UL> (Part No: 111442)
$5.76
Brake Pad Rivets -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860< li>
  • Replaces John Deere OEM number D1761R, D1761< li>
  • 0.481" Length< li>
  • 0.182" Width< li>
  • Package of 36< li>
  • Most brake pads require 6 rivets per pad< li> < UL> (Part No: 111444)
$6.50
Brake Pad Rivets -
  • For John Deere tractor models 510, 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 7520, 8430, 8440, 8450, 8640, 8650, 8850< li>
  • Compatible with John Deere Construction & industrial models 440, 440A, 440B, 444C, 444CH, 500, 510, 540, 540B, 544A, 570, 570A, 600, 640, 644, 646, 646B, 646C, 740, 743, 743A, 762, 762A< li>
  • Replaces John Deere OEM number R708R, 38B307< li>
  • Pack of 18< li>
  • 0.135" Diameter< li>
  • 1.171" (1 11 64") long< li> < UL> (Part No: 111445)
$6.70
Brake Pad Rivets -
  • For John Deere tractor models 3010, 4010, 4040, 4230, 4240, 4320, 4430, 4440, 4450, 5010, 5020, 6030< li>
  • Replaces John Deere OEM number R2593< li>
  • Pack of 20< li>
  • Length: .671"< li> < UL> (Part No: 180902)
$8.60
Brake Pad Rivets -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R1761< li>
  • Pack of 20< li>
  • Length: 1 2"< li> < UL> (Part No: 180907)
$18.26
Brake Pad Rivets -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860< li>
  • Replaces John Deere OEM number D1761R, D1761< li>
  • Length: 0.481"< li>
  • Width: 0.182"< li>
  • Package of 36< li>
  • Most brake pads require 6 rivets per pad< li> < UL> (Part No: 189180)
$7.50
Brake Pad Rivets -
  • For John Deere tractor models 3010, 4000 (Hi-Crop), 4010, 4020 (Hi-Crop), 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 570, 570A, 644A, 644B, 700A, 743A, 760A, 860< li>
  • Replaces John Deere OEM number D2593R< li>
  • Diameter: .182"< li>
  • Length: 0.671"< li>
  • Package of 18< li> < UL> (Part No: 189218)
$5.76
Brake Pad Rivets -
  • For John Deere tractor models 3010, 4000, 4010, 4020, 4230, 4430< li>
  • Replaces John Deere OEM number R26301, 38B363< li>
  • Diameter: .182"< li>
  • Length: 1.343"< li>
  • Package of 18< li> < UL> (Part No: 189234)
$5.76
Brake Pad Rivets -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860< li>
  • Replaces John Deere OEM number D1761R, D1761< li>
  • Length: 0.481"< li>
  • Width: 0.182"< li>
  • Package of 36< li>
  • Most brake pads require 6 rivets per pad< li> < UL> (Part No: 190752)
$7.50
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc Rotor Type Brakes. Metal Backing. Price show is for each. 2.5 inch x 6.5 inch Pad. (Part No: 105607)		$14.00
Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Part No: 126142)		$7.99
Brake Pinion Shaft -
  • For John Deere tractor models 4000, 4020, 4050 (PS s n 2725-later or QR s n 6644-later), 4055 (using 86mm Axle), 4230 (s n 26189-later), 4250 (s n 1000-later), 4255 (using 86mm Axle), 4320, 4430 (s n 40771-later)< li>
  • Replaces John Deere OEM number R62685, R58829< li>
  • Teeth: 15< li>
  • Splines: 18< li>
  • Length: 9.780< li> < UL> (Part No: 108529)
$310.00
Brake Pinion Shaft - For tractor models 520, 530. Brake pinion shaft. Replaces AB5149R and AR5149R (Part No: 121400)		$184.00
Brake Pinion Shaft - For tractor models 620, 630 GP & STD. (Part No: 180706)$197.00
Brake Piston -
  • For John Deere tractor models 6140J, 6145J, 6155J, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7200, 7210, 7400, 7405, 7410, 7420, 7425, 7500, 7505, 7510, 7515, 7520, 7525< li>
  • Replaces John Deere OEM number R125127, R333928< li> < UL> (Part No: 162613)
$220.00
Brake Piston -
  • For John Deere tractor models 5045E, 5055E, 5065E, 5075E, 5080R, 5083E, 5083EN, 5090R, 5093E, 5093EN, 5100R, 5101E, 5101EN, 5103, 5200 (s n 620188-later), 5203, 5204, 5210, 5220, 5225, 5300 (s n 630345-later), 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400 (s n 640542-later), 5403, 5410, 5420, 5420N, 5425, 5425N, 5503, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5620 (s n 411560-later), 5625, 5720 (s n 411560-later), 5725 (s n 005048-later), 5820 (s n 411560-later)< li>
  • Replaces John Deere OEM number L158505, L101856< li>
  • Inside Diameter: 9.529"< li>
  • Outside Diameter: 13.976"< li>
  • Thickness: 1.380"< li> < UL> (Part No: 163798)
$154.00
Brake Piston Housing -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R72043< li> < UL> (Part No: 118440)
$587.00
Brake Plate - 12 teeth, 12.00" O.D.. For tractor models 1020, 1520, 1530, 2020, 2030, (2040 SN# up to 305839), (210C SN# 747742 and up), (2240 SN# up to 305313), (2440 SN# up to 340999), 300B, 820, 830. Replaces AT26290, AT22034. (Part No: 114741)		$105.70
Brake Plate - 12.044" O.D., 8.663" I.D.. For tractor models 820, 830, 1020, 1520, 1530, 2020, (2030 SN# up to 187300), (2040 SN# up to 305839), (2240 SN# up to 305313). T38063, T46728. (Part No: 122116)		$98.00
Brake Plate - For tractor models: 5010, 5020, 6030. (Part No: 105622)$82.00
Brake Plate -
  • For John Deere tractor models 3120, 3320, 3520, 3720, 4105< li>
  • Replaces John Deere OEM number LVU803583, LVU803112< li>
  • ID: 3.780"< li>
  • OD: 6.138"< li>
  • Thickness: .103"< li>
  • Tabs: 3< li> < UL> (Part No: 128184)
$27.61
Brake Plate -
  • For John Deere Construction & industrial models 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number T159409, AT321803, 0887028< li>
  • 5.993" Inner Diameter< li>
  • 9.585" Outer Diameter< li>
  • 81 Teeth< li>
  • .119" Thickness< li> < UL> (Part No: 155528)
$63.00
Brake Plate -
  • For John Deere Construction & industrial models 210K, 210LJ, 310J, 310K, 310KEP, 310SJ, 310SK, 310SKTC, 325J, 325SK, 410J, 410K, 410KTC< li>
  • Replaces John Deere OEM number T228727< li>
  • 6.060" I.D.< li>
  • 9.255" O.D. < li>
  • 4 Tangs< li>
  • 1.770" Tang Width< li> < UL> (Part No: 155537)
$63.00
Brake Plate -
  • For John Deere Construction & industrial models 210K, 210LE, 210LJ, 310E, 310G, 310J, 310K, 310KEP, 310SE, 310SG, 310SJ, 310SK, 315SE, 315SG, 325J, 325SK, 410E, 410G, 410J, 410K, 410KTC, 435, 485E, 486E, 488E, 710D (s n 872329-later)< li>
  • Replaces John Deere OEM number T159474< li>
  • ID: 4-5 16" (109mm)< li>
  • OD: 6-1 4" (158mm)< li>
  • 8 Tabs< li> < UL> (Part No: 159705)
$23.26
Brake Plate - 13.25 Diameter - 18 Teeth For 3010 (Part No: 105612)$72.00
Brake Plate - 13.125 Diameter - 16 Teeth Use with Brake Shaft R49427 For 3020, 4030 (Part No: 110540)$70.00
Brake Plate - 15.1875 Diameter - 18 Teeth For 4010 (Part No: 105613)$71.00
Brake Plate - This 15 inch Diameter Breaker Plate has a center hub of 15 Teeth, 4 3 16 inch diameter. Teeth have a 1 16 inch flat tip. The plate is .220 thick. Use with Brake Shaft R56731, R59928, R62685, and R67198 For 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430. **PLEASE VERIFY THICKNESS NEEDED FOR YOUR APPLICATION*** (Part No: 105616)		$66.00
Brake Plate - This Breake Plate is 15 inches in Diameter with a 15 Tooth hub with 4 1 4 inch diameter. The teeth have a 1 4 inch flat tip. Use with Brake Shaft R33431 and R45799 For 4000, 4020, 4230, 4320, 4430, 4440. (Part No: 105617)		$68.02
Brake Plate - Can be used with R59696 Pinion Gear and R59698 Pinion Shaft. 15.1875 Diameter - 14 Teeth. For 4040, 4240, 4440 (Part No: 105615)		$72.00
Brake Plate - 16.5 Diameter - 13 Teeth Use with Brake Shaft R43016 For 4520, 4620, 4630, 7020, 7520 (Part No: 105618)$81.00
Brake Plate - 17 Diameter - 14 Teeth Use with Brake Shaft R57614 and R63911 For 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 7520, 8440, 8630, 8640, 8650 (Part No: 105620)$88.00
Brake Plate - 17 Diameter - 15 Teeth Use with Brake Shaft R61421 and R74072 For 4840, 4850 (Part No: 105619)$100.00
Brake Plate Assembly - This Brake Plate Assembly has a 12.111" Outside Diameter, and a 8.663" Inside Diameter. It replaces R55774, T52029 (Part No: 170415)		$132.00
Brake Plate Assembly -
  • For John Deere tractor models 2840 (s n 305025-later), 2940, 2950 (s n 481283-earlier), 3030 (s n 301275-later), 3130 (s n 301275-later)< li>
  • Replaces John Deere OEM number L33909< li>
  • I.D. 8.663"< li>
  • O.D. 12.111"< li> < UL> (Part No: 170414)
$209.00
Brake Return Spring - For tractor models 50, B, BO, BR. (Part No: 125769)		$10.99
Brake Return Spring - Brake Pedal Return Spring for model D on SN: 188058 & up, H, R also a clutch operating rod spring on the starting engine., 60, 620, 80. On a 5010 used as clutch operating rod spring on the starting engine. 4 5 8 inch overall length. 2 used per tractor as brake pedal return spring. (Part No: 125761)		$10.30
Brake Return Spring -
  • For John Deere tractor models L, LA, LI< li>
  • Replaces John Deere OEM number L207T< li>
  • Sold Individually< li> < UL> (Part No: 125757)
$18.26
Brake Return Spring -
  • For John Deere tractor model MT< li>
  • Compatible with John Deere Construction & industrial model 350< li>
  • Replaces John Deere OEM number M957T< li>
  • Length: 2-3 8"< li> < UL> (Part No: 125758)
$15.26
Brake Return Spring -
  • For John Deere tractor models 40 (H), 420 (H), 430, 435, 440, 1010 (Single Rowcrop)< li>
  • Replaces John Deere OEM number M2222T< li>
  • Length: 2-3 4"< li> < UL> (Part No: 125759)
$11.49
Brake Return Spring -
  • For John Deere tractor models 40 (TryCycle), 420, 430< li>
  • Replaces John Deere OEM number M2039T< li>
  • Length: 4-1 2"< li> < UL> (Part No: 125760)
$16.50
Brake Rod End - LH thread, 4-3 8" overall length. For tractor models 850, 950, 1050. (Part No: 184819)		$8.10
Brake Shaft Seal - Used as a brake shaft seal. The width of the seal measures 0.350 inch, 1.750 inches I.D., and an O.D. of 2.254 inches. Replaces AR1587, AR1587R. For the following 2 cylinder tractors: 820, 830. (Part No: 152783)$3.86
Brake Shoe - This is a single brake shoe for tractor models 750, 770. Replaces CH15072. (Part No: 181199)$57.36
Brake Shoe - Brake Shoes 4 needed per tractor. Sold individually. For model 850. Replaces M801894. (Part No: 150364)		$63.00
Brake Shoe, Bonded - Bonded brake shoefor model 950. Replaces CH11247. Price shown is for each, sold only in multiples of 2 items. (Part No: 122083)$111.00
Brake Shoe Lining Kit - For 720, 730, 730D, 820, 830. Except Hi Crop Models. Contains 4 linings and rivets. Used to relign brake shoes (Part No: 105621)$28.49
Brake Shoe Lining Kit, Early - For B SN# 200999 & below. Includes 4 linings with rivets. Each lining is 1-1 2" wide x 7" long with 6 rivet holes. Replaces AB3848R. (Part No: 115394)		$22.95
Brake Shoe Lining Kit, Late - For B after 201000 with 9-3 4 inch linings, and 50 series. Set of 4 linings and rivets, each lining uses 8 rivets, measures 9.75 inches by 1.5 inches. Used to reline brake shoes. Replaces AB3848R, B223R, B2723R. (Part No: 105604)		$28.95
Brake Shoes - Brake Shoe Set of 2 with Linings. For model H. Replaces AH628R. (Part No: 178305)		$114.00
Brake Shoe Spring - Fits John Deere - 820 2 cylinder, 830 2 cylinder (GAS), 830 2 cylinder (DSL), A, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730; Replaces: R21753, R21753R, A348R (Part No: 125768)		$4.66
Brake Shoes, Set of 2 - These Brake Shoes are used on John Deere B serial number 201000 and up, and 50. Overall outer curved length: 9-3 4 inches, Width: 1-1 2 inches, 8 rivets retain lining to shoe. Replaces RE204403, AB3833R (Part No: 178908)		$129.42
Brake Shoes, Set of 2 - This is a Riveted Brake Shoe Assembly pair. Services one wheel. Two sets needed per tractors. Used on John Deere 70 Row-Crop and Standard, 630 Row-Crop and Standard, R, 80, 520, 530, 620. Overall outer curved length: 10-1 2 inches, Width: 2-1 4 inches. Replaces AR483R, RE227938 (Part No: 178918)		$114.00
Brake Shoes, Set of 2 - This is a Riveted Brake Shoe Assembly (2-piece set). 1 Pair is for 1 wheel only. Two sets required per tractor. Overall outer curved length: 12-1 4 inches, Lining length: 11-5 8 inches, Width: 2-1 4 inches, Used one 730 both gas, LP, diesel Row-Crop and Standard, 720 both gas, LP, diesel, Row-Crop and Standard, 820 2 cylinder, 830 2 cylinder, 840. Replaces John Deere part number AF2789R. (Part No: 164549)		$129.00
Brake Turnbuckle - For tractor models 850, 950, 1050. Measures 10MM x 90MM OAL. (Part No: 181763)		$5.00
Brake Valve -
  • For John Deere tractor models 2510, 2520, 3010, 3020 (s n 122999), 4000 (s n 201000-later), 4010, 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s n 024999), 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Replaces John Deere OEM number R26369< li> < UL> (Part No: 117229)
$9.20
Brake Valve Assembly, Remanufactured, AR42400, R31454 -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 500, 510B, 570, 570A, 600, 700< li>
  • Replaces John Deere OEM number AR42400< li>
  • Replaces Casting number R31454< li> < UL> (Part No: 205168)
$1150.01
Brake Valve Assembly, Remanufactured, AR42400, R42007, R67309, R67313 -
  • For John Deere tractor models 500, 510, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 500, 510B, 570, 570A, 600, 700< li>
  • Replaces John Deere OEM number AR42400< li>
  • Replaces Casting number R42007, R67309, R67313< li> < UL> (Part No: 205174)
$710.01
Brake Valve Mounting Gasket -
  • For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 920, 940, 1030, 1040, 1120, 1140, 1520 (L Reverser), 1530, 1630, 1640, 1840, 2020 (L Reverser), 2030 (L Reverser), 2040, 2040S, 2120, 2130, 2140, 2240, 2440 (L Reverser), 2630 (L Reverser), 2640 (L Reverser), 2840, 2940, 3130, 3135, 3140, 3340< li>
  • Replaces John Deere OEM number R234311, T30687, T22961, T25141, T28468< li> < UL> (Part No: 161855)
$2.40
Brake Valve Operating Boot Assembly -
  • For John Deere tractor models 3010, 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier), 5010< li>
  • Compatible with John Deere Construction & industrial models 500, 600< li>
  • Replaces John Deere OEM number RE244537, 14H732, R31267, R31269, R31270, R31270R, R31271, R31272, R31449, R31458, R31459< li> < UL> (Part No: 164634)
$48.95
Check Valve - New check valve assembly with seat, pin, and spring. For tractor models 4425, 4435, 1020, 1120, 2020, 2040, 2120, (2240 SN# 350000 and up), (2440 SN# 341000 and up), 2840, 2940, 3120, 820, 830, 920. Replaces AL23836, AL67574, AL69179, AL70242 (Part No: 152036)		$15.40
Clutch Pedal Return Spring -
  • For John Deere tractor models 2510, 3010, 3020, 4010, 4020< li>
  • Replaces John Deere OEM number R26833< li>
  • Length 2.938< li>
  • O.D. 0.938< li> < UL> (Part No: 126156)
$8.96
Clutch Pedal Return Spring -
  • For John Deere tractor models 2010, 2510 (With Powershift), 2520, 3020 (With Powershift), 4020 (With Powershift), 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 8430, 8630< li>
  • Replaces John Deere OEM number R43684, R33179< li>
  • Length 7.520"< li>
  • O.D. 1.161< li> < UL> (Part No: 126157)
$14.00
Clutch Pulley Cover Retaining Spring w/ Rivet -
  • For John Deere tractor models 70, 720, 730 (Gas)< li>
  • Replaces John Deere OEM number 16H644, F1391R< li>
  • Length 2.579"< li>
  • Width 1.040"< li>
  • Hole 0.263"< li> < UL> (Part No: 126161)
$14.99
Disc Bearing - For tractor models 24B, 25B, 4484, 4493, 484, 51, 684, 81. (Part No: JD8565)$69.33
Disc Bearing Kit - Disc bearing kit, with Dura-Flex bearings. Fits disc models: 210, 215, 220, 230, 235, 621, 630. Contents of kit TP-AA30941:(1) TP-AA28184 bearing (import), (1) TP-AA27172 flange kit, (1) TP-AA33968 gasket, & HDW. For 210, 215, 220, 230, 235, 621, 630 (Part No: 154644)$32.50
Disc Brake Ball Bearing - Measuring 7 8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Part No: 126209)		$2.50
O-Ring, Durometer 70 -
  • For John Deere tractor models 2950, 3040, 3140, 3150, 3640, 5045D, 5045E, 5050E, 5055D, 5055E, 5065E, 5075E, 5076E, 5076EF, 5076EL, 5076EN, 5078E, 5080R, 5080RN, 5082E, 5083E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090EN, 5090R, 5090RN, 5093E, 5093EN, 5100E, 5100R, 5100RN, 5101E, 5101EN, 5103, 5203, 5204, 5210, 5220, 5225, 5303, 5310, 5320, 5320N, 5325, 5325N, 5403, 5410, 5415, 5415H, 5420, 5420N, 5425, 5425N, 5503, 5510, 5520, 5520N, 5525N, 5600, 5603, 5605, 5610, 5615, 5620, 5625, 5700, 5705, 5715, 5715HC, 5720, 5725, 5820< li>
  • Replaces John Deere OEM number L116345< li>
  • Inside Diameter: 11.772"< li>
  • Thickness: .142"< li> < UL> (Part No: 171554)
$5.00
Parking Brake Band -
  • For John Deere tractor models 5303, 5310, 5320, 5400, 5403, 5415, 5420, 5425, 5500, 5503, 5510, 5610, 5615, 5625, 5715, 5725< li>
  • Replaces John Deere OEM number RE62481< li> < UL> (Part No: 150976)
$115.00
Parking Brake Disc -
  • For John Deere Construction & industrial models 210K, 210LE, 210LJ, 310E, 310G, 310J, 310K, 310KEP, 310SE, 310SG, 310SJ, 310SK, 315SE, 315SG, 315SJ, 315SK, 325J, 325K, 325SK, 410E, 410G, 410J, 410K, 410KTC, 435, 485E, 486E, 488E, 710D (s n 872329-earlier), 710G, 710J, 710K< li>
  • Replaces John Deere OEM number T159475< li>
  • Outside Diameter: 5.785"< li>
  • Inside Diameter: Major 4.182", Minor 3.914"< li>
  • Thickness: .149"< li>
  • Teeth: 34< li> < UL> (Part No: 151109)
$33.00
Planetary Brake Kit - Kit contains 11 friction discs, 13 separator plates, 12 seals. For model 3020 all serial numbers. (Part No: 173220)		$1275.00
Planetary Brake Kit - Kit includes 16 friction discs, 16 separator plates, and 12 seals. For tractor models 4000, 4020 covers all serial numbers. (Part No: 172829)		$1800.00
Planetary Brake Kit - Kit includes 12 friction discs, 12 separator plates, and 11 seals. For tractor models 4230, 4240 covers all serial numbers. (Part No: 173224)		$1425.00
Planetary Brake Kit - Kit includes 13 friction discs, 13 separator plates, and 10 seals. For tractor models 4430, (4440 SN# 027783 and below). (Part No: 173225)		$1496.30
Planetary Brake Kit - Kit includes 15 friction discs, 15 separator plates, 10 seals. For model 4440 SN# 027784 and up. (Part No: 173227)		$1575.00
Planetary Brake Kit - Kit includes 12 friction discs, 12 separator plates, and 10 seals. For tractor models 4520, 4620, 4630 covers all serial numbers. (Part No: 173223)		$1300.00
Planetary Brake Kit - Kit includes 14 friction discs, 14 separator plates, and 10 seals. For model 4640 SN# 012830 and below with R60365 31 32" planetary brake backing plate. (Part No: 173226)		$1375.00
Planetary Brake Kit - Kit includes 16 friction discs, 16 separator plates, and 10 seals. For model 4640 SN# 012831 and up with R43139 3 8" backing plate. (Part No: 180495)		$1575.00
Planetary Brake Plate -
  • For John Deere tractor models 6300, 6405, 6500, 6600, 6605, 7200, 7210, 7400, 7405, 7410, 7500, 7505, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number R101158< li>
  • Inner Diameter: 9.375"< li>
  • Outer Diameter: 11.210"< li>
  • Tang Width: 2.944"< li>
  • Tangs: 4< li>
  • Thickness: .119"< li> < UL> (Part No: 155536)
$31.00
Pulley Clutch Facing -
  • For John Deere tractor models B (s n 201000-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2354R< li>
  • Floating Facings< li>
  • Order 2< li> < UL> (Part No: 105723)
$14.26
Pulley Clutch Facings With Rivets -
  • For John Deere tractor models H, HNH, HWH< li>
  • Replaces John Deere OEM number R90216< li>
  • O.D. 9.25"< li>
  • Width: 1.875"< li>
  • Thickness: .160"< li> < UL> (Part No: 125374)
$78.00
Seal, Planetary -
  • For John Deere tractor models 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number R169152, R43377< li> < UL> (Part No: 166874)
$24.50
Service Brake Disc -
  • For John Deere Construction & industrial models 210, 210K, 210LJ, 310, 310J, 310K, 310KEP, 310SJ, 310SK, 315, 325, 325J, 325SK, 410, 410J, 410K, 410KTC< li>
  • Replaces John Deere OEM number AT339059< li>
  • .224" Thick< li>
  • 48 Tooth< li>
  • O.D 9.15" < li>
  • I.D. 5.910"< li> < UL> (Part No: 151116)
$84.00
Service Brake Disc -
  • For John Deere Construction & industrial models 210, 210K, 210LJ, 310, 310J, 310K, 310KEP, 310SJ, 310SKTC, 315, 325, 325J, 325SK, 410, 410J, 410K, 410KTC< li>
  • Replaces John Deere OEM number AT339543< li>
  • 20 Tooth< li>
  • O.D.: 9.175" < li>
  • I.D.:2.620" < li>
  • .218" Thick< li> < UL> (Part No: 151858)
$84.00
Switch - Brake, AL67715, AL27809 -
  • For John Deere tractor models 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 2030, 2040, 2120, 2130, 2140, 2250, 2450, 2650, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650, 4040, 4040S< li>
  • Replaces John Deere OEM number AL67715, AL27809< li> < UL> (Part No: 162292)
$22.26
Washer - Brake Sealing Ring -
  • For John Deere tractor models 820, 830, 1020, 1120, 1520, 1530, 2020, 2030, 2040, 2240< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 310, 380, 400, 401, 480, 480A, 480B, 740< li>
  • Replaces John Deere OEM number R50703, T22102< li>
  • OD: 10.627"< li>
  • ID: 10.359"< li>
  • Thickness: .134"< li>
  • Durometer: 70< li> < UL> (Part No: 159528)
$5.76
 
Clutch
Carrier, Clutch Throw Out Bearing - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 380, 400, 401, 401B, 401C, 410, 480, 480B. (Part No: 163426)		$84.00
Clutch Adjusting Disc - Made from ducitle iron. Will not crack under stress like the original grey cast iron design since ductile iron has far more tensile strength. This part is used on John Deere A up to serial number 647000, AO up to serial number 273079, AR up to serial number 273079. (Part No: 167578)		$69.99
Clutch Adjusting Spring - This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Part No: 118280)		$2.60
Clutch Adjusting Tool - For tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 7020. (Part No: 178693)		$83.00
Clutch Alignment Tool - 1-1 16" 16 spline, 1-11 16" 16 spline, .67" pilot. For tractor models 2510, 3010, 2520, 3020. (Part No: 114666)$23.26
Clutch Alignment Tool - 1-1 4" 19 spline, 1-7 8" 29 spline, .67" pilot. For tractor models 4000, 4010, 4020. (Part No: 119891)$11.40
Clutch Alignment Tool - 1-1 4" 10 spline, 1-3 4" 27 spline, .59" pilot. For tractor models 2130, 2040, 2040S, 2140, 2940, 3040, 3140, 3640, 2150, 2550, 2650, 2750, 2950, 3050, 3150, 3350, 3650, 2155, 2555, 2755, 2855, 2955, 3055, 3255. (Part No: 121933)$27.00
Clutch Alignment Tool - Clutch alignment tool for 1 3 8 inch 10 spline disc and .67 inch pilot hole. For tractor models: M, MT, 320, 420, 330, 430, 440, 40, 40C, 40 Utility. Note, for .60 inch pilot hole, order ATLT130 (Part No: 119892)		$8.06
Clutch Alignment Tool - Clutch alignment tool for 1 3 8 inch 10 spline disc and .60 inch pilot hole. For tractor models: M, MT, 320, 420, 330, 430, 440, 40, 40C, 40 Utility. Note, for .67 inch pilot hole, use 1112-5996 (Part No: 185510)		$4.76
Clutch Backing Plate - Part number R50341 is a new part, manufactured to OEM specifications. It is used on John Deere models: 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430 (Quad and Syncro Range Transmission), 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission), 4555 (Quad Range Transmission), 4560 (Quad Range Transmission), 4630, 4640 (Part No: 173246)		$296.20
Clutch Bearing - Release bearing for Models 1010, 2510, 2520, 3020, 40, 4000, 4010, 4020, 420 INDUST CONST, 430 INDUST CONST, 4320 COMPACT TRACTOR, 440 SKIDDER, 450 RIDING MOWER, 450B INDUST CONST, 450C INDUST CONST, 450D INDUST CONST, 450E INDUST CONST, 450G INDUST CONST, 455, M, MT. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces AM3983T. (Part No: 107007)		$17.76
Clutch Bushing - For tractor models 620, 630, 70, 720, 730. (Part No: 179488)$36.00
Clutch Cable - This clutch cable is 1120MM (44.9 inches) long. It is used on John Deere models 6120, 6215, 6220, 6225, 6230, 6320, 6325, 6330, 6415, 6420, 6425, 6430, 6515, 6520, 6525, 6530, 6534, 6615, 6620, 6630, 6715, 7130, 7220, 7230, 7320, 7330, 7420, 7425, 7505, 7515, 7520, 7525. It replaces original part number AL151612. (Part No: 154657)		$40.50
Clutch Collar (Fork) - The collar has (2) 1 2 inch slotted pivot holes, measures 0.313 of an inch in thickness, and has an inner diameter of 5 inches. For the John Deere 620 and 630. (Part No: R20181)		$181.13
Clutch Control Valve Cover Gasket - Used on John Deere Tractors with independent PTOs, this Clutch Control Valve Cover Gasket replaces L33342, R234266 (Part No: 161808)		$1.80
Clutch Cover - For A after SN# 648000, G after SN# 13804, 60, 620, 630, 70, 720, and 730. Not painted. This part has an I.D. of 12.1875 inches by 1.0625 inches Thick. Please verify size before ordering. Does not include springs part number R5071. Also Replaces F821R. (Part No: 105719)		$38.99
Clutch Cover - For B (SN# 201000 & UP), 50, 520, and 530. Clutch Cover also replaces B3764R. Not painted. (Part No: 105725)		$34.95
Clutch Cover Spring - Comes with rivet, 3 required per tractor sold individually. For tractor models A, G, 60, 520, 530, 620, 630. Replaces: Rivet 16H644, Spring A6121R (Part No: 126162)		$14.99
Clutch Disc - Lined clutch disc~ new. 13 diameter, 10 spline, 1-1 4 hub, 6 pads for heavy working conditions. For single clutch, not for direction reverser. For tractor models with production or conversion 13 diaphragm clutch. Tractors: 2355N, 2550, 2555, 2750, 2755, 2855N For 2355N, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955, 3150 (Part No: 165445)		$265.00
Clutch Disc - Lined clutch disc~ remanufactured. 12 diameter, 1-1 16 hub, 16 spline, woven facings, for tractors 3010, 3020 tractor serial number 6800 and up. Replaces AR41095 and R39652. For 3010, 3020 (Part No: 111642)		$94.99
Clutch Disc - Lined clutch disc~ remanufactured. 12 diameter, 1-1 4 hub, 19 spline, woven facings, tractors: 4000, 4010, 4020. Replaces R32049R. For 4000, 4010, 4020 (Part No: 114013)$69.99
Clutch Disc - Clutch disc with 13" 19 spline, 1-1 4" hub. For power shift tractors. Tractors: 4000, 4020, 4040, 4230, 4240, 4430. Replaces AR40667, AR55655, RE29607, RE29608. (Part No: 130146)		$324.90
Clutch Disc - Rigid Organic, 10" with 10 1.25" splines, fits models 1010, 2010, 2010 Gas and LP.(replaces AT11660, AT16930) (Part No: 173245)		$80.00
Clutch Disc - 10", 1.375" spline diameter, 10 spline. For tractor models (320 SN# 321209 and up), 330, 40, 40C, (420, 430 up to SN# up to 99999), 435, 440, M, MT. Replaces AT141682, AM2577T. (Part No: 172284)		$52.00
Clutch Disc - 8-1 2" x 1" - 13 spline. For tractor models 850, 950. (Part No: 115043)		$76.00
Clutch Disc - 11 inch diameter, 1 inch hub, 15 spline. For tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640. Industrials: 300, 300B, 301, 302, 401, 401B, 401D. (Part No: 184538)		$76.00
Clutch Disc - Transmission or PTO clutch, 48 internal splines, 12" O.D., 7.010" I.D. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850. OEM number RE60082, AR60082 (Part No: 127049)		$55.00
Clutch Disc - Clutch disc, 7-7 8" x 7 8" – 20 spline. Tractors: 650, 750 (with single clutch), 670 & 770 (with single clutch). Replaces M802964. (Part No: 121898)		$98.00
Clutch Disc - 1.250" 10 spline. For model 440D. (Part No: 166321)$146.99
Clutch Disc - This spring type clutch disc fits the following tractor models: 3055, 3155, 3255, and 3650. This disc measures 12.875 inches in diameter and has 10 splines with a spline diameter of 1.25 inches. Replaces: AL68023 and AL62237. (Part No: 166167)		$79.00
Clutch Disc - This is a 11 inch Drive Disc, 6 pad cerametallic, with 1.406 inch - 19 spline hub with damper. Replaces RE225677 (Part No: 180459)		$167.72
Clutch Disc -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number RE29773, AR38498< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 16"< li>
  • Clutch Spline: 16< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 114018)
$126.90
Clutch Disc -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number RE29775, AR49011< li>
  • Clutch Size: 13-1 5"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • For a Remanufactured version of this sku use Item #: 205753< li> < UL> (Part No: 114019)
$142.10
Clutch Disc -
  • For John Deere tractor models 301, 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 301A, 302, 400, 401, 401A, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number RE29881, AT24855, AT32207, AR66923, AR66924< li>
  • Clutch Diameter: 11"< li>
  • Clutch Hub Diameter: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 121899)
$79.00
Clutch Disc -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5210, 5220, 5225, 5303, 5310, 5320, 5325, 5403, 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715< li>
  • Replaces John Deere OEM number RE177574< li>
  • Clutch Diameter: 11"< li>
  • Clutch Hub Diameter: 1-3 8"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Pad< li>
  • For a Remanufactured version of this sku use Item #: 205707< li> < UL> (Part No: 122737)
$144.00
Clutch Disc -
  • For John Deere tractor models 420, 430, 435< li>
  • Replaces John Deere OEM number AM3404T, AT12159< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 8"< li>
  • Clutch Spline: 17< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 122805)
$170.55
Clutch Disc -
  • For John Deere tractor model 1010< li>
  • Compatible with John Deere Construction & industrial model 340D (s n 21830 - earlier & s n 25708 - 109737), 350, 350B, 440, 440A, 440B, 440C (s n 21830 - earlier & s n 25708 - 109737), 440D (s n 21830 - earlier & s n 25708 - 109737), 450, 450B, 450C, 450D, 450E, 450G, 455, 480 (s n 21830 - earlier & s n 25708 - 109737)< li>
  • Replaces John Deere OEM number AT104328, AT106474< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • For a Remanufactured version of this sku use Item #: 205701< li> < UL> (Part No: 135025)
$57.00
Clutch Disc -
  • For John Deere tractor model 1010< li>
  • Compatible with John Deere Construction & industrial model 340D (s n 21830 - earlier & s n 25708 - 109737), 350, 350B, 440, 440A, 440B, 440C (s n 21830 - earlier & s n 25708 - 109737), 440D (s n 21830 - earlier & s n 25708 - 109737), 450, 450B, 450C, 450D, 450E, 450G, 455, 480 (s n 21830 - earlier & s n 25708 - 109737)< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li>
  • For a Remanufactured version of this sku use Item #: 205702< li> < UL> (Part No: 135026)
$74.00
Clutch Disc -
  • For John Deere tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 400, 401, 401A, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number AT32207, AT24855, AR66923, R66923HD4< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li>
  • For a Remanufactured version of this sku use Item #: 205769< li> < UL> (Part No: 135027)
$60.00
Clutch Disc -
  • For John Deere tractor models 1641, 1641F, 2040S, 2140, 2550, 2750, 2940, 2950, 3040, 3140< li>
  • Replaces John Deere OEM number AL36133, AL39099, AL39168, AL64759< li>
  • Clutch Diameter: 12-5 8"< li>
  • Clutch Hub Diameter: 1-1 4"< li>
  • Clutch Splines: 10< li>
  • Clutch Center: Springs< li>
  • Clutch Type: 7 Pad< li> < UL> (Part No: 150757)
$194.00
Clutch Disc -
  • For John Deere tractor models 1830, 2030, 2130, 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AL120015, AL23097, AL30452, AT26774< li>
  • Clutch Diameter: 12"< li>
  • Clutch Hub Diameter: 1-1 4"< li>
  • Clutch Splines: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 150759)
$113.00
Clutch Disc -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1950, 2130, 2140, 2150, 2155, 2255< li>
  • Replaces John Deere OEM number AL120013, AL23094, AL30451, AL37705, AL64338.< li>
  • Clutch Diameter: 12"< li>
  • Clutch Hub Diameter: 1"< li>
  • Clutch Splines: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 150760)
$197.00
Clutch Disc -
  • For John Deere tractor models 2120, 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AL120021, AL23097, AL30452, AT26774< li>
  • Clutch Diameter – 12"< li>
  • Clutch Hub Diameter - 1.25"< li>
  • Clutch Splines - 10< li>
  • Clutch Center - Solid < li>
  • Clutch Type – 6 Pad Ceramettallic Disc< li> < UL> (Part No: 150762)
$179.00
Clutch Disc -
  • For John Deere tractor models 2240 (s n 349999-earlier), 2630, 2640 (s n 340999-earlier), 2640 (s n 341000-later)< li>
  • Compatible with John Deere Construction & industrial models 300B, 302A, 401C, 401D< li>
  • Replaces John Deere OEM number AR63695, AT35212< li>
  • Clutch Size: 11"< li>
  • Clutch Type: 5 Pad< li>
  • Clutch Spline Diameter: 1.000"< li>
  • Clutch Spline Count: 15< li> < UL> (Part No: 152040)
$128.00
Clutch Disc -
  • For John Deere tractor models 6110, 6110L, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6615, 6715, 7220, 7320, 7420, 7520, 7720, 7820< li>
  • Replaces John Deere OEM number R216291< li> < UL> (Part No: 155532)
$34.20
Clutch Disc -
  • For John Deere tractor models 301, 1020, 1520, 2020, 2030, 2240, 2840, 4030, 4230, 4430, 4630< li>
  • Replaces John Deere OEM number RE214241< li> < UL> (Part No: 160700)
$720.00
Clutch Disc -
  • For John Deere tractor model 1250< li>
  • Replaces John Deere OEM number CH16339, CH20226< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li>
  • For 5 pad disc use Item #: 149887< li> < UL> (Part No: 163554)
$176.97
Clutch Disc -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401D< li>
  • Replaces John Deere OEM number RE29880, AT29696, AT32209, AR66925< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 164166)
$107.00
Clutch Disc -
  • For John Deere tractor model 5010< li>
  • Replaces John Deere OEM number AR36784< li>
  • 1-3 8"< li>
  • 21 Spline< li> < UL> (Part No: 166025)
$220.00
Clutch Disc -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1950, 2130, 2140, 2150, 2155, 2255< li>
  • Replaces John Deere OEM number AL39123, AL64338< li>
  • Replaces manufacturer number 328-0167-26< li>
  • LuK< li> < UL> (Part No: 166121)
$265.00
Clutch Disc -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number AR49011HD< li>
  • 6 Pad< li>
  • 11" Diameter< li>
  • 1-1 4"< li>
  • 19 Spline< li> < UL> (Part No: 166135)
$177.66
Clutch Disc -
  • For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1630, 1830, 2030, 2130< li>
  • Replaces John Deere OEM number AL67525, AL33315< li>
  • 15" Diameter< li>
  • 1-3 4"< li>
  • 16 Spline< li> < UL> (Part No: 166137)
$238.25
Clutch Disc -
  • For John Deere tractor models 2840, 3030, 3130< li>
  • Replaces John Deere OEM number AL26466< li>
  • OD: 12"< li>
  • Shaft: 1-1 4"< li>
  • Spline: 10< li>
  • 5 Pad< li>
  • Rigid< li> < UL> (Part No: 166181)
$154.00
Clutch Disc -
  • For John Deere tractor models 830, 930, 1020, 2020, 2030, 2040 (s n 349999-later), 2120, 2150 (s n 495151-later), 2155, 2240 (s n 350000-later), 2255 (s n 495151-later), 2350, 2350 (s n 463068-earlier), 2355< li>
  • Replaces John Deere OEM number AL34903< li> < UL> (Part No: 166265)
$275.00
Clutch Disc -
  • For John Deere tractor models 5020, 6030< li>
  • Replaces John Deere OEM number AR36699< li>
  • Woven< li>
  • 12" Diameter< li>
  • 1-3 8"< li>
  • 21 Spline< li> < UL> (Part No: 166283)
$198.00
Clutch Disc -
  • For John Deere tractor models 820, 830, 840, 930, 1020, 1030, 1130, 1520, 1630, 2020, 2030< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 350, 350B, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number AR66924< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 166284)
$91.00
Clutch Disc -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number RE29773HD, 185288TB5 < li>
  • 5 Pad< li>
  • Shaft: 1-1⁄16"< li>
  • Spline: 16< li> < UL> (Part No: 166378)
$175.00
Clutch Disc -
  • For John Deere tractor models 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3050, 3140, 3150, 3350, 3640< li>
  • Replaces John Deere OEM number AL69935< li>
  • Clutch Plate Diameter: 12.875"< li>
  • Clutch Plate Spline: 10< li>
  • Clutch Plate Spline Diameter: 1.25"< li>
  • Flywheel needs to be turned down to 13.03" ID to fit this clutch< li> < UL> (Part No: 169890)
$500.00
Clutch Disc -
  • For John Deere tractor models 4520, 4620, 7020< li>
  • Replaces John Deere OEM number RE29776, AR43117< li>
  • Spline Count: 21< li>
  • Spline Diameter: 1.375"< li> < UL> (Part No: 174079)
$211.95
Clutch Disc -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number AR55660, AR42128, AR30130, AR41094, AL55660< li>
  • Diameter: 12"< li>
  • Hub Diameter: 1-1 4"< li>
  • Splines: 19< li>
  • Style: Solid< li>
  • 5 pad< li>
  • Replaces 5224 organic disc< li> < UL> (Part No: 176341)
$154.00
Clutch Disc -
  • For John Deere Construction & industrial models 440, 440A, 440B, 540B, 540D, 548D< li>
  • Replaces John Deere OEM number AT142064, AT29593, AT114586< li>
  • Splines: 19< li>
  • Hub Diameter: 1.266"< li>
  • Spring loaded< li> < UL> (Part No: 176355)
$483.00
Clutch Disc -
  • For John Deere Construction & industrial models 400G, 450B, 450C, 450D, 450E (s n 720888-later), 455D< li>
  • Replaces John Deere OEM number AT160474, AT104328, AT116577< li>
  • Diameter: 12"< li>
  • Splines: 10< li>
  • Hub Diameter: 1-1 4"< li> < UL> (Part No: 176357)
$213.66
Clutch Disc -
  • For John Deere tractor models 1020, 1120, 2020, 2030, 2120, 2440, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 400, 401, 401B, 401D< li>
  • Replaces John Deere OEM number AR66925, AT29696, AT32209< li>
  • Spline Count: 15< li>
  • Spline Diameter: 1.023"< li>
  • Diameter: 11"< li>
  • Pads: 5< li>
  • Center: Solid< li> < UL> (Part No: 176423)
$146.00
Clutch Disc -
  • For John Deere tractor models 1450, 1650< li>
  • Replaces John Deere OEM number RE180226< li>
  • Type: Rigid, organic< li>
  • Shaft Diameter: 1.375"< li>
  • Disc Diameter: 11.25"< li>
  • Splines: 19< li> < UL> (Part No: 176444)
$267.00
Clutch Disc -
  • For John Deere tractor models 6100D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603< li>
  • Replaces John Deere OEM number YZ90755< li>
  • Clutch Size: 12-1 4"< li>
  • Clutch Hub: 1-1 16"< li>
  • Clutch Spline: 20< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 5 Pads< li>
  • For a Remanufactured version of this sku use Item #: 149834< li> < UL> (Part No: 176625)
$89.00
Clutch Disc -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number R42127, AR26603, AR42127, AR55660, R32049, RE210075, RE29769< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Splines: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pad< li> < UL> (Part No: 177029)
$119.30
Clutch Disc -
  • For John Deere tractor models 840, 940, 1040, 1120, 1140, 1350, 1550, 1640, 1750, 1850, 1950, 2150, 2250, 2255, 2350, 2355, 2450, 2750< li>
  • Replaces John Deere OEM number AL120011, AL36525, AL39169, AL56308, AL64340< li>
  • Clutch Size: 12-5 8"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 7 Pad< li> < UL> (Part No: 177032)
$184.00
Clutch Disc 10 Inch - This is 10 inch organic, spring loaded disc with a 20 spline, 1-5 16 inch hub. It is used on Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT21669, AT21665, RE33891, AL24059 (Part No: 166097)		$245.00
Clutch Disc, 11 - Spline dia. 1.024, 15 spline. For tractor models 1020, 1040, 1120, 1130, (1140 narrow), 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040. (Part No: 166166)		$150.00
Clutch Disc, 11 Inch - Spline diameter 1.024 Inch, 15 spline. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2450, 840, 940, 1030, 1040, 1120, 1130, 1140, 1640, 1830, 1840, 2040, 2150, 2240, 2250, 2255, 2350. Replaces part numbers AL31436, 1L33315, AL34903, AL39425, AL66180, VPG2144, 328006111, 328006120 2, 328006121 2, 328006127, 328018726. (Part No: 165382)$146.00
Clutch Disc, 13 - 1.250" spline diameter, 19 spline. For tractor models 3020, (4000 SN# 201000 and up), 4020, 4230, 4240, (4430 SN# 022373 and up) all with powershift. (Part No: 130097)		$395.00
Clutch Disc, 7 Pad DCB - LuK -
  • For John Deere tractor models 2040S, 2140, 2940 (s n 415943-earlier)< li>
  • Replaces John Deere OEM number 332-0002-10< li>
  • 1-1 4"< li>
  • 10 Spline< li>
  • DCB-7< li> < UL> (Part No: 166233)
$204.00
Clutch Disc, 9.875", Organic, Rigid - For tractor models 300, 301, (301A SN# up to 308561 without PTO, without Reverser), 302, 1020, 1030, (2040 SN# up to 349999), 820, 830, 920. (Part No: 166042)$86.00
Clutch Disc 9 Inch - Button style for Double Clutch on Models 1050, 850, 900, 950, 990. (Part No: 130149)		$178.85
Clutch Disc - Carraro -
  • For John Deere tractor models 5200 (collar shift & top shaft synchronized), 5210 (Collar shift less cab s n 321722-earlier & with cab s n 320725-earlier), 5300 (collar shift & top shaft synchronized), 5310 (Collar shift less cab s n 332929-earlier & with cab s n xxxxxx-earlier), 5400 (collar shift & top shaft synchronized), 5410 (Collar shift less cab s n 342472-earlier & with cab s n 342522-earlier), 5415 (Double Clutch s n 002287-earlier), 5500 (collar shift & top shaft synchronized), 5510 (Collar shift less cab s n xxxxxx-earlier & with cab s n 351789-earlier), 5615 (Sync Shuttle s n 002318-earlier), 5715 (Sync Shuttle)< li>
  • Replaces John Deere OEM number RE64042, R64042, RE45661< li>
  • Replaces Carraro manufacturer number 351482< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Size: 11"< li>
  • Hub: 1-3 8"< li>
  • Spline" 19< li>
  • Center: Spring< li>
  • Type: 5 Pad< li>
  • For Economy Version use Item #: 149887< li> < UL> (Part No: 157776)
$260.00
Clutch Disc Drive - 20 tooth, 6 spline, 9.940 inch diameter. For JD A tractor. (Part No: 105726)		$145.99
Clutch Disc - Heavy Duty -
  • For John Deere tractor models 1020, 1120, 1520 (independent PTO without reverser), 2030, 2120, 2440 (independent PTO without reverser), 2630 (independent PTO without reverser), 2640 (independent PTO without reverser)< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 301A, 302, 400, 401, 401A, 401B, 401D< li>
  • Replaces John Deere OEM number AR63695, R63965, R63700< li>
  • Size: 11"< li>
  • Hub Diameter: 1"< li>
  • Splines: 15< li>
  • 6 Pad< li>
  • Clutch Center: Solid< li>
  • Heavy Duty Version< li> < UL> (Part No: 177016)
$160.00
Clutch Disc, Heavy Duty, 6-Pad Transmisson -
  • For John Deere tractor model 5010< li>
  • Replaces John Deere OEM number AR36784< li>
  • Fits 11" Dual Clutch< li>
  • 1-3 8"< li>
  • 21 Spline< li>
  • RSB-6< li> < UL> (Part No: 166072)
$220.00
Clutch Disc, Remanufactured -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • New Design- engages smoothly like a woven disc with the holding power of a heavy duty 6 Pad< li>
  • Large pads< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pad< li> < UL> (Part No: 204573)
$160.01
Clutch Disc, Remanufactured -
  • For John Deere tractor model H (s n 10000-later)< li>
  • Clutch Diameter - 9-1 4"< li>
  • Clutch Hub Diameter - 1-1 2"< li>
  • Clutch Splines - 6< li>
  • Clutch Center - Solid< li>
  • Clutch Type - 4 regular pads< li> < UL> (Part No: 204606)
$86.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 750, 755< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205695)
$120.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 750, 755< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pads< li> < UL> (Part No: 205696)
$141.01
Clutch Disc, Remanufactured -
  • For John Deere tractor model 1010< li>
  • Compatible with John Deere Construction & industrial model 340D (s n 21830 - earlier & s n 25708 - 109737), 350, 350B, 440, 440A, 440B, 440C (s n 21830 - earlier & s n 25708 - 109737), 440D (s n 21830 - earlier & s n 25708 - 109737), 450, 450B, 450C, 450D, 450E, 450G, 455, 480 (s n 21830 - earlier & s n 25708 - 109737)< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li>
  • For a New version of this sku use Item #: 135026< li> < UL> (Part No: 205702)
$135.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models M, MT, 40, 320, 330, 420, 430, 435, 440< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205714)
$95.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models B, BN, BNH, BW, BWH< li>
  • Clutch Size: 7"< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205717)
$86.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 50, 520, 530< li>
  • Clutch Size: 7"< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205718)
$86.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 820, 830, 840, 930, 1020, 1030, 1130, 1520, 1630, 2020, 2030< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 350, 350B, 400, 401, 401B, 401C, 401D< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205719)
$93.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 820, 830, 840, 930, 1020, 1030, 1130, 1520, 1630, 2020, 2030< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 350, 350B, 400, 401, 401B, 401C, 401D< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li> < UL> (Part No: 205720)
$114.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models R, 70, 80, 720, 820< li>
  • Clutch Size: 5"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205725)
$130.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 310, 380, 400, 401, 410, 480< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-5 16"< li>
  • Clutch Spline: 20< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205726)
$175.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 1010, 1520, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 310, 380, 400, 401, 410, 480< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-5 16"< li>
  • Clutch Spline: 20< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 4 Reg Pads< li> < UL> (Part No: 205727)
$216.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 5020, 6030< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205731)
$97.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 6"< li>
  • Clutch Spline: 16< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 5 Lg Pads< li> < UL> (Part No: 205744)
$130.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 6"< li>
  • Clutch Spline: 16< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Lg Carbotic Pads< li> < UL> (Part No: 205745)
$124.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 5 Pads< li> < UL> (Part No: 205746)
$130.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 4520, 4620, 7020< li>
  • Clutch Size: 15"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 7 Pads< li> < UL> (Part No: 205748)
$239.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 4520, 4620, 7020< li>
  • Clutch Size: 15"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 7 Pads< li> < UL> (Part No: 205749)
$239.01
Clutch Disc, Remanufactured -
  • For John Deere tractor model 4320< li>
  • New Design Smooth Engaging, Less Abrasive Offset Pads< li>
  • Clutch Size: 13-1 2"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Lg Pads< li> < UL> (Part No: 205752)
$161.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401D< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li> < UL> (Part No: 205758)
$125.00
Clutch Disc, Remanufactured -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 401< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205759)
$166.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 1250, 1450, 1650, 5200, 5210, 5300, 5310, 5400, 5410, 5415, 5500, 5510, 5615, 5715< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 5 Reg Pads< li> < UL> (Part No: 205762)
$118.70
Clutch Disc, Remanufactured -
  • For John Deere tractor models 6030, 7520< li>
  • Clutch Size: 13-1 2"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Lg Pads< li>
  • Requires 2 per tractor< li> < UL> (Part No: 205765)
$170.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 5020, 6030< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Lg Pads< li> < UL> (Part No: 205766)
$155.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 400, 401< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205768)
$94.01
Clutch Disc, Remanufactured -
  • For John Deere tractor models 2040, 2140, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640< li>
  • Clutch Size: 12-7 8"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Lg Pads< li>
  • For a New version of this sku use Item #: 158383< li> < UL> (Part No: 205772)
$183.01
Clutch Disc, Remanufactured -
  • For John Deere tractor model A< li>
  • Compatible with John Deere Construction & industrial model 760, 770< li>
  • Clutch Size: 13"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205777)
$410.01
Clutch Disc, Remanufactured, AH84955. -
  • For John Deere tractor models 6600, 7700< li>
  • Replaces John Deere OEM number AH84955.< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li> < UL> (Part No: 205783)
$126.01
Clutch Disc, Remanufactured, AL23094 -
  • For John Deere tractor model 2130< li>
  • Replaces John Deere OEM number AL23094, AL30451< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205722)
$125.00
Clutch Disc, Remanufactured, AL23094 -
  • For John Deere tractor model 2130< li>
  • Replaces John Deere OEM number AL23094, AL30451< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pads< li> < UL> (Part No: 205723)
$171.00
Clutch Disc, Remanufactured, AL26466 -
  • For John Deere tractor models 2130, 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AL26466< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205715)
$163.01
Clutch Disc, Remanufactured, AL2834T -
  • For John Deere tractor models L, LA, LI< li>
  • Replaces John Deere OEM number AL2834T< li>
  • Clutch Size: 8-1 2"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205716)
$136.01
Clutch Disc, Remanufactured, AL36133 -
  • For John Deere tractor models 2040, 2140, 2550, 2555, 2750, 2940 (s n 415944 - later), 2950, 3040, 3140< li>
  • Replaces John Deere OEM number AL36133, AL39099, AL39168< li>
  • Clutch Size: 12-5 8"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 5 Reg Pads< li> < UL> (Part No: 205738)
$183.01
Clutch Disc, Remanufactured, AL36133, AL39099 -
  • For John Deere tractor models 2040S, 2140, 2940, 3040, 3140< li>
  • Replaces John Deere OEM number AL36133, AL39099, AL39168< li>
  • Clutch Size: 12-5 8"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 7 Reg Pads< li> < UL> (Part No: 205730)
$201.00
Clutch Disc, Remanufactured, AL62237 -
  • For John Deere tractor models 3055, 3155, 3255, 3650< li>
  • Replaces John Deere OEM number AL62237, AL68023, AL70273< li>
  • Clutch Size: 12-7 8"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Lg Pads< li> < UL> (Part No: 205773)
$187.01
Clutch Disc, Remanufactured, AL64759 -
  • For John Deere tractor models 2040, 2140, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640< li>
  • Replaces John Deere OEM number AL64759< li>
  • Clutch Size: 12-7 8"< li>
  • Clutch Hub: 1-1 4'< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 5 Lg Pads< li> < UL> (Part No: 205771)
$170.01
Clutch Disc, Remanufactured, AR26603 -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number AR26603, AR42127, AR55660, RE210075, RE29769, RE32049< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • For a New version of this sku use Item #: 114013< li> < UL> (Part No: 204234)
$93.01
Clutch Disc, Remanufactured, AR312185 -
  • For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4430< li>
  • Compatible with John Deere Construction & industrial models 500, 510< li>
  • Replaces John Deere OEM number AR312185, AR40667, AR55655, RE29608< li>
  • Clutch Size: 13"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205757)
$336.00
Clutch Disc, Remanufactured, AR31256 -
  • For John Deere tractor model 3020< li>
  • Compatible with John Deere Construction & industrial model 440, 440B, 480, 500C, 510, 540, 548D, 570, 640, 648D, 670< li>
  • Replaces John Deere OEM number AR31256, AR40686, AR40919, RE29607< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li>
  • For a New version of this sku use Item #: 130097< li> < UL> (Part No: 205742)
$355.01
Clutch Disc, Remanufactured, AR31256 -
  • For John Deere tractor model 3020< li>
  • Compatible with John Deere Construction & industrial model 440, 480, 500, 510, 540, 548, 570, 640, 648, 670< li>
  • Replaces John Deere OEM number AR31256, AR40686, AR40919, RE29607< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205743)
$354.00
Clutch Disc, Remanufactured, AR49011 -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number AR49011, RE29775< li>
  • Clutch Size: 13-1 2"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • For a New version of this sku use Item #: 114019< li> < UL> (Part No: 205753)
$116.00
Clutch Disc, Remanufactured, AR50289 -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number AR50289, AR58024, R43203HD6< li>
  • Clutch Size: 13-1 2"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 19< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Lg Pads< li> < UL> (Part No: 205751)
$203.00
Clutch Disc, Remanufactured, AT104328 -
  • For John Deere tractor model 1010< li>
  • Compatible with John Deere Construction & industrial model 340D (s n 21830 - earlier & s n 25708 - 109737), 350, 350B, 440, 440A, 440B, 440C (s n 21830 - earlier & s n 25708 - 109737), 440D (s n 21830 - earlier & s n 25708 - 109737), 450, 450B, 450C, 450D, 450E, 450G, 455, 480 (s n 21830 - earlier & s n 25708 - 109737)< li>
  • Replaces John Deere OEM number AT104328, AT106474< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • For a New version of this sku use Item #: 135025< li> < UL> (Part No: 205701)
$129.01
Clutch Disc, Remanufactured, AT104328 -
  • For John Deere Construction & industrial models 400G, 440, 440A, 440B, 440C, 450, 450B, 450C, 450D, 450E, 455, 480< li>
  • Replaces John Deere OEM number AT104328, AT160474< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205703)
$146.01
Clutch Disc, Remanufactured, AT14612 -
  • For John Deere tractor models 430, 435, 1010, 2010< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Replaces John Deere OEM number AT14612< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li> < UL> (Part No: 205697)
$116.01
Clutch Disc, Remanufactured, AT14612 -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Replaces John Deere OEM number AT14612< li>
  • Replaces OEM number R14612HD6< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205698)
$153.01
Clutch Disc, Remanufactured, AT151605 -
  • For John Deere Construction & industrial models 410, 510, 610, 710< li>
  • Replaces John Deere OEM number AT151605< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li>
  • For a New version of this sku use Item #: 130094< li> < UL> (Part No: 205700)
$710.01
Clutch Disc, Remanufactured, AT21066 -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Construction & industrial models 440 (s n 21831 - 25707), 440A (s n 21831 - 25707), 440B (s n 21831 - 25707), 440C (s n 21831 - 25707), 448 (s n 21831 - 25707), 448D (s n 21831 - 25707), 450 (s n 21831 - 25707), 450B (s n 21831 - 25707), 450C (s n 21831 - 25707), 450D (s n 21831 - 25707), 450E (s n 21831 - 25707), 455 (s n 21831 - 25707), 2010 (s n 21831 - 25707)< li>
  • Replaces John Deere OEM number AT21066< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li> < UL> (Part No: 203624)
$123.01
Clutch Disc, Remanufactured, AT21066 -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Construction & industrial models 440 (s n 21831 - 25707), 440A (s n 21831 - 25707), 440B (s n 21831 - 25707), 440C (s n 21831 - 25707), 448D, 450, 450B, 450C, 450D, 450E, 455< li>
  • Replaces John Deere OEM number AT21066< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205713)
$154.01
Clutch Disc, Remanufactured, AT21669 -
  • For John Deere tractor models 301, 1020, 1520, 2020, 2030, 2150, 2240, 2550, 2555, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 302, 310, 380, 400, 401, 410, 480< li>
  • Replaces John Deere OEM number AT21669, AL24059< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-5 16"< li>
  • Clutch Spline: 20< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Pads< li> < UL> (Part No: 203396)
$198.01
Clutch Disc, Remanufactured, AT24855 -
  • For John Deere tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 400, 401< li>
  • Replaces John Deere OEM number AT24855, AT32207, AR66923, R66923HD6< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li>
  • For a New version of this sku use Item #: 184538< li> < UL> (Part No: 205770)
$170.00
Clutch Disc, Remanufactured, AT32207 -
  • For John Deere tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 400, 401, 401A, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number AT32207, AT24855, AR66923, R66923HD4< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li>
  • For a New version of this sku use Item #: 135027< li> < UL> (Part No: 205769)
$131.00
Clutch Disc, Remanufactured, DISC -
  • For John Deere tractor models 4520, 4620, 7020< li>
  • Replaces John Deere OEM number DISC< li>
  • Clutch Size: 15"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 7 Pads< li> < UL> (Part No: 205750)
$214.01
Clutch Disc, Remanufactured, R35638 -
  • For John Deere tractor model 5010< li>
  • Replaces John Deere OEM number R35638< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 205733)
$184.01
Clutch Disc, Remanufactured, R35638. -
  • For John Deere tractor model 5010< li>
  • Replaces John Deere OEM number R35638.< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205732)
$125.00
Clutch Disc, Remanufactured, R78424 -
  • For John Deere Construction & industrial models 340D (s n 21831 - earlier & s n 25708 - 109737), 440, 440A, 440B, 440C (s n 21831 - earlier & s n 25708 - 109737), 440D (s n 21831 - earlier & s n 25708 - 109737), 450, 450B, 450C, 450D, 450E, 455, 480 (s n 21831 - earlier & s n 25708 - 109737)< li>
  • Replaces John Deere OEM number R78424< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 5 Large Pads< li> < UL> (Part No: 205659)
$161.01
Clutch Disc, Remanufactured, R78424HD6 -
  • For John Deere Construction & industrial models 400, 440, 440A, 440C, 450, 455, 480< li>
  • Replaces John Deere OEM number R78424HD6< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 4"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Lg Pads< li> < UL> (Part No: 205778)
$174.01
Clutch Disc, Remanufactured, RE29603 -
  • For John Deere tractor models 4440, 4520, 4620, 4630, 4640, 4840< li>
  • Replaces John Deere OEM number RE29603< li>
  • Clutch Size: 13"< li>
  • Clutch Hub: 1-3 8"< li>
  • Clutch Spline: 21< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 6 Reg Pads< li> < UL> (Part No: 204244)
$475.00
Clutch Disc, Remanufactured, RE29880 -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401D< li>
  • Replaces John Deere OEM number RE29880, AR66925, AT32209< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205760)
$99.01
Clutch Disc, Remanufactured, RE30211 -
  • For John Deere tractor models 3010, 3020< li>
  • Replaces John Deere OEM number RE30211< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 16"< li>
  • Clutch Spline: 16< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li> < UL> (Part No: 203727)
$102.00
Clutch Disc, Remanufactured, YZ90755 -
  • For John Deere tractor models 6100D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603< li>
  • Replaces John Deere OEM number YZ90755< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 1-1 16"< li>
  • Clutch Spline: 20< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 5 Pad PTO< li>
  • For a New version of this sku use Item #: 149834< li> < UL> (Part No: 205785)
$108.00
Clutch Disc, Riveted - Fits B (SN# 201000 & above), 50, 520, 530. Replaces: AB3471R, AB4828R, RE29878 (Part No: 108434)		$62.99
Clutch Disc, Transmission - Replacing part numbers AR89320, AR95827, RE234264, AR67710 and AR95827, this disc measures; inside diameter 7 inches (78mm) with 48 teeth and 22 - 0.248 inch (6.3mm) holes, outside diameter 12 inches (305mm). Used on John Deere 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 8430, 8440, 8450, 8630, 8640, 8650, 8850. Prices and sold individually. (Part No: 127056)		$48.70
Clutch Disc with Lining - The measurements on this disc are 9.250 inches outside diameter, 0.372 inches thick, 3 5 8 inch diameter holes to slide over the R1869R pins. When assembling, the discs slide OVER the pins NOT the T-bolts. Used on John Deere R, 80, 820, 830 and 840 2 cylinder tractors. 2 or 3 are used depending on the model. Replaces John Deere part numbers AR1052R, AR403R, RE29785 (Part No: 187023)		$101.01
Clutch Disc with Lining - Bonded -
  • For John Deere tractor models R, 80, 820, 830< li>
  • Replaces John Deere OEM number RE29785, AR1052R< li>
  • Inside Diameter: 5.480:< li>
  • Outside Diameter: 9.230"< li> < UL> (Part No: 173273)
$101.00
Clutch Disc, Woven -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number AR49011, RE29775< li>
  • Fits 11" 13-1 2" Dual Clutch< li>
  • 1-1 4"< li>
  • 19 Spline< li>
  • RCO< li> < UL> (Part No: 166165)
$160.00
Clutch Drive Disc - 20 tooth, 6 spline, 9.940 inch diameter. For tractor models 70, 720, 730. (Part No: 105728)		$140.00
Clutch Drive Disc - 20 tooth, 6 spline, 9.940 inch diameter. For JD 60 tractor. (Part No: 105727)		$156.70
Clutch Drive Disc - 20 tooth, 6 spline, 9.940 inch diameter. For JD 620, 630 tractors. (Part No: 110136)		$139.95
Clutch Drive Disc - For tractor models 520, 530. (Part No: 108433)		$189.99
Clutch Drive Disc - For model (B SN# 201000 and up). (Part No: 110921)		$174.99
Clutch Drive Disc - For model 50. (Part No: 110920)		$245.00
Clutch Drive Disc - Replaces OEM#s A2448R, AA2279R or AA232R. For model A (Serial# 488000 thru 647999), AR, AO (up thru Serial# 273079) (Part No: 112133)		$169.95
Clutch Drive Disc - For model B SN# 96000 to 200999. Replaces AB3806R. (Part No: 109781)		$212.00
Clutch Drive Disc - For model G SN# 13804 and up. (Part No: 109782)		$194.95
Clutch Drive Disc - For tractor models A (From SN# 648000), AO, AR (From SN# 273080). Replaces A4028R, and AA4635R. (Part No: 105726)		$145.99
Clutch Drive Disc, Sliding - Sliding Drive Disc is 20 spline, 10 inch O.D. For tractor models 60, 620, 630, 70, 720, 730 tractors. (Part No: 105720)		$82.00
Clutch Drive Disc, Sliding - For model (B SN# 201000 and up). (Part No: 126167)		$63.40
Clutch Drive Disc, Sliding - For tractor models 50, 520, 530. (Part No: 108435)		$81.00
Clutch Facing - Pulley clutch facing. Floating: B to 200999, BR, BO. 7-7 8 outside diameter, 4-7 8 inside diameter, 1.5 wide, .15 thick. For B, BO, BR (Part No: 105722)		$14.00
Clutch Facing - Pulley clutch facing. Floating. For tractor models A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3 4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. Replaces: C614R, R90215. PRICED EACH. If you order 1, you will receive only 1 clutch facing. (Part No: 105721)		$10.70
Clutch Facing - For unstyled model: D (Part No: 180689)$37.00
Clutch Facing - For tractor models 80, 820, 830. (Part No: 126126)$26.26
Clutch Facing - For model R. (Part No: 126126)		$26.26
Clutch Facing, Pulley - Fits A serial number 648000 and up - 1 used per tractor, G - 1 used per tractor, 60 - 1 used per tractor, 70 - 2 used per tractor, 630 - 1 used per tractor, 730 - 2 used per tractor, AO serial number 273080 and up - 1 used per tractor, AR serial number 273080 and up - 1 used per tractor, D serial number 109944 and up - 1 used per tractor, 620 - 1 used per tractor, 720 - 2 used per tractor. Sold individually. Replaces AA6129R, AD1027R, AD752R, RE22932, RE29779. (Part No: 105718)		$39.26
Clutch Fork - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2840, 300, 300B, 301, 301A, 302, 302A, 3030, 3120, 3130, 400, 401, 401B, 401C, 655, 655B, 750, 750B, 755, 755A, 755B, 820, 830, 850, 850B, 855, 920, 930, 940. (Part No: 173105)		$111.00
Clutch Fork - For tractor models (450 with Hi-Lo transmission), 450B, 450C, 450D, 450E, 455D, 455E, 480G. (Part No: 173110)		$110.30
Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Part No: 126143)		$10.16
Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1 4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Part No: 114893)		$24.00
Clutch Handle Pivot Bolt - If your clutch handle is sloppy because the pivot bolt has seen better days, then simply replace it with this new clutch handle pivot bolt. This brand new bolt replaces part numbers B180R and R121198. Measures 0.650 inches outside diameter, to 0.530 inches outside diameter. 3-7 16 inches in length with 9 16 - 12 thread size. Uses B177R bushing, not included. (Part No: 126141)		$28.76
Clutch Housing Gasket - Used on John Deere models: 4040, 4230, 4240 serial number below 007434, 4430, 4440 serial number below 014820. Replaces John Deere part number R50335 (Part No: 152017)		$11.56
Clutch Kit - This new 9 inch dual clutch kit contains: 9 inch, 19 spline, 1.47 inch (36 mm) hub, 6 pad pressure plate assembly w INCLUDES ORGANIC SPRING LOADED ENGINE DISC; Heavy-duty 9 inch, 13 spine, .984 inch (25 mm) hub, woven clutch disc; release and pilot bearings, and clutch alignment tool. Fits 850, 870 (SN# 016000 & up), 900HC (with yanmar diesel), 970, 1050, 1070. Replaces LVA801352, (SUB FOR AM877476, AM8784 97, AM878798 AND AM879876) (Part No: 164287)		$575.00
Clutch Kit - Our new single stage clutch kit contains: 12.875 inch diameter, 27 spline single, 1 3 4 inch hub, single stage pressure plate assembly, Flywheel Step - .850 inch; 12.875 inch diameter, ceramic, spring driven, 10 spline, 1 1 4 inch hub, new clutch disc; pilot bearing and clutch alignment tool. NOTE: This kit does NOT come with a release bearing. Additional $15.00 shipping due to weight. This clutch kit fits the following tractor models: 1641, 1641F, 2040S, 2140, 2355N, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3355, 3640, and 3640S. (Part No: 122744)		$1300.00
Clutch Kit - Clutch kit, for transmission and PTO clutch. Includes new: pressure plate assembly, 12 with 11 PTO disc, 29 spline, 1-7 8 hub~ new clutch disc, 12, 19 spline, 1-1 4 hub, woven lining (will replace button style disc), new clutch and PTO release bearings(2) and For tractor models 4010, 4020. Replaces RE153029, AR42127, T6203, T6014 (Part No: 156034)		$744.00
Clutch Kit -
  • For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number AL120022, AL39936< li>
  • Replaces manufacturer number 6202-2RS, 6203-2RS, AG 28, N1171< li>
  • Clutch Diameter - 11"< li>
  • Clutch Hub Diameter - 1"< li>
  • Clutch Splines - 15< li>
  • Clutch Center - Solid< li>
  • Clutch Type - 6 regular Pads< li>
  • Pressure Plate Size - 11"< li>
  • Pressure Plate Levers - 3< li>
  • Pressure Plate Springs - 6< li>
  • Pressure Plate Hub Diameter - 1-1 2"< li>
  • Pressure Plate Splines - 23< li>
  • Pressure Plate Type - Single Stage, Flywheel Step .795"< li> < UL> (Part No: 135031)
$500.00
Clutch Kit -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number RE179193< li>
  • Clutch Size:12"< li>
  • Clutch Hub:1-1 4"< li>
  • Clutch Spline:19< li>
  • Clutch Center:Solid< li>
  • Clutch Type:6 Pad< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type: Flywheel Step 2.844"< li>
  • Kit Contains: PTO Disc, Transmission Disc, PTO Release Bearing, Transmission Release Bearing, Pilot Bearing< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160951)
$850.00
Clutch Kit -
  • For John Deere tractor models 2130, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AL119960, AL120021, AL120025, AL30777, AT26781< li>
  • Pressure Plate: 12.6", 6 bolt, cast iron, 1 3 4" x 27 spline, fixed PTO hub, with release ring< li>
  • Diaphragm single clutch< li>
  • Clutch Disc: 10 spline 6 pad< li>
  • Release bearing: 23 64" O.D. x 55 65" Thick< li>
  • Pilot bearing ID: 19 32"< li>
  • For units with potted flywheel< li>
  • For Clutch Disc only use Item #: 121895< li> < UL> (Part No: 165203)
$1050.00
Clutch Kit -
  • For John Deere tractor models 850, 870, 900, 970, 990, 1050, 1070, 4005< li>
  • Replaces John Deere OEM number LVA801352< li> < UL> (Part No: 166337)
$860.00
Clutch Kit -
  • For John Deere tractor models M, MT, 40, 320, 330, 420, 430, 435< li>
  • Kit Includes: 6202-2RS, 6203-2RS, AT LT130, AT 5325, N1087, R2576< li>
  • Clutch Diameter: 10"< li>
  • Clutch Hub Diameter: 1-1 4"< li>
  • Clutch Splines: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Reg Pads< li>
  • Pressure Plate Size: 10"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 173363)
$164.00
Clutch Kit -
  • For John Deere tractor models 5039D, 5045D, 5055D< li>
  • Replaces John Deere OEM number RE73665, 220126903< li>
  • Dual Stage< li>
  • Includes Pressure Plate Assembly, Clutch Disc, PTO Disc, PTO Release Bearing, Transmission Release Bearing, and Pilot Bearing< li>
  • Housing #220126903< li>
  • Size: 11"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Splines: 19< li>
  • Pressure Plate Hub Diameter: 1-3 8"< li>
  • Pressure Plate Type: Spring Center< li>
  • Clutch Disc: 3 Pad< li>
  • Clutch Splines: 13< li>
  • Clutch Type: Solid< li> < UL> (Part No: 177011)
$855.00
Clutch Kit -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2040, 2440, 2630< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 401< li>
  • Replaces John Deere OEM number AR100649, AT30046, RE22610< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Hub Diameter: 1-1 2"< li>
  • Pressure Plate Splines: 23< li>
  • Pressure Plate Type - Single Stage< li>
  • Flywheel Step: .820"< li>
  • Clutch Diameter : 11"< li>
  • Clutch Hub Diameter : 1"< li>
  • Clutch Splines: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pad< li>
  • Kit Includes: Pressure Plate, Clutch Disc, Clutch Release Bearing, and Pilot Bearing< li> < UL> (Part No: 177043)
$335.00
Clutch Kit -
  • For John Deere tractor models 1010, 2010< li>
  • Replaces John Deere OEM number AT16053, R16930, AR43065, AL28037< li>
  • Clutch Diameter: 10"< li>
  • Clutch Hub Diameter: 1-1 4"< li>
  • Clutch Splines: 10< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • Pressure Plate Size: 10"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Hub Diameter: 1-3 4"< li>
  • Pressure Plate Splines: 27< li>
  • Pressure Plate Type: Single Stage, Flywheel Step 1.180"< li>
  • For a Remanufactured version of this sku use Item #: 108023< li> < UL> (Part No: 189645)
$204.00
Clutch Kit, 10 Inch - This new single stage clutch kit includes a new pressure plate, a 10 inch, 10 spline, 1 3 8 inch hub, woven clutch disc. The release bearing (N1087), has an outside diameter of 3.500 inches, and inside diameter of 2.062 inches, and a thickness of .750 inches. This kit has two pilot bearings and two alignment tools (not shown) to accommodate different flywheels. The first pilot bearing (6202-2RS), has an outside diameter of 1.375 inches, and inside diameter of .590 inches, and a thickness of .470 inches. The second pilot bearing (6203-2RS), has an outside diameter of 1.574 inches, and inside diameter of .669 inches, and a thickness of .470. Used on tractors M, MI, MT, 320, 330, 435, 40, 420, 430, 440, MC. Replaces AM2575T, AM2576T, AM3983T (Part No: 173360)		$155.50
Clutch Kit, 10 Inch - Our clutch kit for tractors with reverser transmission includes: A new 10 inch, 3 spring, pressure plate assembly; a new, 10 inch, 20 spline, 1 5 16 inch hub, organic woven, heavy duty clutch disc; new release and pilot bearings. Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410). (Part No: 184281)		$210.00
Clutch Kit, 11 Inch Double - The 11 Inch double clutch is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1550, 1630, 2020, 2030, 2120, 2130, 2240, 2440, 2630, 2640, John Deere Construction and Industrials 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, 401D. Includes AL120022 pressure plate (Flywheel Step - 2.200 Inch to 2.210 Inch) with PTO Disc (1.5 Inch 23 spline hub), 11 Inch rigid transmission disc (1 inch, 15 spline hub), Release Bearing, Pilot Bearing and Alignment Tool. Replaces 228002310, 328006110, 628-1411-10, 628141110, AL120017, AL120022, AL67525 (Part No: 135038)		$650.00
Clutch Kit, Remanufactured -
  • For John Deere tractor models 1010, 2010< li>
  • Clutch Diameter - 10"< li>
  • Clutch Hub Diameter - 1-1 4"< li>
  • Clutch Splines - 10< li>
  • Clutch Center - Solid< li>
  • Clutch Type - Woven< li>
  • Pressure Plate Size - 10"< li>
  • Pressure Plate Levers - 3< li>
  • Pressure Plate Springs - 3< li>
  • Pressure Plate Hub Diameter - 1-3 4"< li>
  • Pressure Plate Splines - 27< li>
  • Pressure Plate Type - Single Stage, Flywheel Step 1.180"< li> < UL> (Part No: 202060)
$276.00
Clutch Kit, Remanufactured -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Clutch Diameter - 12"< li>
  • Clutch Hub Diameter - 1-1 16"< li>
  • Clutch Splines - 16< li>
  • Clutch Center - Solid< li>
  • Clutch Type - Woven< li>
  • Pressure Plate Size - 12"< li>
  • Pressure Plate Levers - 6< li>
  • Pressure Plate Springs - 12< li>
  • Pressure Plate Hub Diameter - 1-11 16"< li>
  • Pressure Plate Splines - 26< li>
  • For a New version of this sku use Item #: 171420< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 202062)
$910.01
Clutch Kit, Remanufactured -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Clutch Diameter - 12"< li>
  • Clutch Hub Diameter - 1-1 16"< li>
  • Clutch Splines - 16< li>
  • Clutch Center - Solid< li>
  • Clutch Type - 6 Large Carbotic Pads< li>
  • Pressure Plate Size - 12"< li>
  • Pressure Plate Levers - 6< li>
  • Pressure Plate Springs - 12< li>
  • Pressure Plate Hub Diameter - 1-11 16"< li>
  • Pressure Plate Splines - 26< li>
  • Pilot Bearing included< li>
  • Release Bearing included< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 202063)
$1000.01
Clutch Kit, Remanufactured -
  • For John Deere tractor models 4000, 4010, 4020 (Syncro Range)< li>
  • Clutch Diameter - 12"< li>
  • Clutch Hub Diameter - 1-1 4"< li>
  • Clutch Splines - 19< li>
  • Clutch Center - Solid< li>
  • Clutch Type - 6 Large Carbotic Pads< li>
  • Pressure Plate Size - 12"< li>
  • Pressure Plate Levers - 6< li>
  • Pressure Plate Springs - 15< li>
  • Pressure Plate Hub Diameter - 1-7 8"< li>
  • Pressure Plate Splines - 29< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 202065)
$1175.01
Clutch Kit, Remanufactured -
  • For John Deere tractor models 330, 1020, 1520, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 310, 310A, 310B, 380, 401, 401B, 401C, 401D, 410, 480A, 480B, 480C< li>
  • Clutch Diameter - 10"< li>
  • Clutch Hub Diameter - 1-5 16"< li>
  • Clutch Splines - 20< li>
  • Clutch Center - Spring< li>
  • Clutch Type - Woven< li>
  • Pressure Plate Size - 10"< li>
  • Pressure Plate Levers - 3< li>
  • Pressure Plate Springs - 3< li>
  • Pressure Plate Type - Single Stage, Flywheel Step 1.480"< li> < UL> (Part No: 202066)
$370.01
Clutch Kit, Remanufactured -
  • For John Deere tractor model 4320< li>
  • Clutch Diameter - 13-1 2"< li>
  • Clutch Hub Diameter - 1-1 4"< li>
  • Clutch Splines - 19< li>
  • Clutch Center - Solid< li>
  • Pressure Plate Size - 13-1 2"< li>
  • Pressure Plate Levers - 6< li>
  • Pressure Plate Springs - 15< li>
  • Pressure Plate Hub Diameter - 1-7 8"< li>
  • Pressure Plate Splines - 29< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 204346)
$920.01
Clutch Kit, Remanufactured -
  • For John Deere tractor model 4320< li>
  • Clutch Diameter - 13-1 2"< li>
  • Clutch Hub Diameter - 1-1 4"< li>
  • Clutch Splines - 19< li>
  • Clutch Center - 6 large pads< li>
  • Pressure Plate Size - 13-1 2"< li>
  • Pressure Plate Levers - 6< li>
  • Pressure Plate Springs - 15< li>
  • Pressure Plate Hub Diameter - 1-7 8"< li>
  • Pressure Plate Splines - 29< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205614)
$980.01
Clutch Kit, Syncro-Range - Our new 12 inch, dual stage clutch kit contains: 12 inch, 6 lever, double pressure plate assembly (E153027); 12 inch, fiber clutch disc (AR42125); pilot bearing (AT23188); release bearings (AR26845 and AR41794), and clutch alignment tool. For the following tractor models with syncro-range: 3010, 3020, 500. (Part No: 171420)		$820.00
Clutch Lever Pin - Part number R31131 is a clutch lever pin used on John Deere models: 500, 600, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4630, 4640, 8430 Model Year 1974-1981, 8440, 8450, 8560, 8630, 8640, 8650, 8760, 8850, 8960 (Part No: 172865)		$6.06
Clutch Lever Pivot Bushing - Used with B180R Clutch Handle Pivot Bolt this bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. (Part No: 126142)		$7.99
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (A up to SN# 647999), (AO, AR up to SN# 273079). (Part No: 126148)		$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (A from SN# 648000 and up), (AO, AR from SN# 273080 and up). (Part No: 126149)		$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For model B up to SN# 59999. (Part No: 126144)		$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For model B SN# 60000 to 95999. (Part No: 126145)		$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For model B SN# 96000 to 200999. (Part No: 126146)		$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For model B SN# 201000 and up. (Part No: 126147)		$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For model G from SN# 13804 and up. (Part No: 126150)		$49.95
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (50, 520, 530 from SN# 5020400 and up). (Part No: 178282)		$38.76
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models 60, 620, 630. (Part No: 126152)		$34.50
Clutch Operating Bolt - Clutch Operating Bolt. Three are used per tractor, sold individually and priced each. For tractor models 70, 720, 730. (Part No: 113902)		$33.90
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models 80, (820, 830 2-cyl). (Part No: 126153)		$49.95
Clutch Operating Bolt - 3 used per tractor, sold individually. For model R. (Part No: 126151)		$34.50
Clutch Pedal Bushing - This bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Used as a brake or clutch pedal bushing on the following models: 4030, 4040, 4050, 4055, 4230, 4255, 4240, 4430, 4440, 4455, 4630, 4640, 4650, 4840, 4850, 8020, 8430, 8630. Replaces R51192. (Part No: 126143)		$10.16
Clutch Pedal Extension Spring - This spring has a 10.34 inch free length and is 0.94 inches OD. Replaces John Deere part number T21452. It is used on John Deere 820 (3 Cyl), 830 (3 Cyl), 920, 930, 1020, 1030, 1120, 1130, 1520 (Less Reverser), 1530, 1630, 1640, 1830, 2030, 2030 (Less Reverser), 2040 (Less Reverser), 2255, 2350, 2355, 2550, 2555, 2630 (Less Reverser), 2640 (Less Reverser), 2755, 2855, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C (Part No: 124546)		$9.16
Clutch Pin - Clutch linkage pin. Made in the USA, 1 2" diameter, 1 16" oversized to compensate for wear, use 1 2" drill to ream orginal hole, two used per tractor. For tractor models B, H, 50. (Part No: 178319)		$6.96
Clutch Pin - Clutch linkage pin. Made in the USA, 9 16" diameter, 1 16" oversized to compensate for wear, use 9 16" drill to ream orginal hole, two used per tractor. For tractor models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: 178321)		$10.70
Clutch Plate - Replaces OEM# A4355R. For A, D, G, 60, 620, 630, 70, 720 (Part No: 105720)		$82.00
Clutch Plate - For tractor models: (A, AN, ANH, AW, AWH all serial number 648000 and up), (AO and AR serial number 273080 and up), G. 9-7 8 inch diameter by 0.375 inch thick. 1 Used Per Tractor. Replaces: F195R (Part No: 109780)		$59.95
Clutch Plate - Used on John Deere 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, this New Clutch Plate is manufactured to Original Equipment Manufacturer's specification. (Part No: 173336)		$231.70
Clutch Plate -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5310N, 5400, 5400N, 5410, 5500, 5500N, 5510, 5510N< li>
  • Replaces John Deere OEM number R109442< li>
  • Replaces Carraro manufacturer number 342541< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154614)
$183.00
Clutch Plate -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5310N, 5400, 5400N, 5410, 5500, 5500N, 5510, 5510N< li>
  • Replaces John Deere OEM number R109444< li>
  • Replaces Carraro manufacturer number 350213< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154615)
$145.00
Clutch Plate -
  • For John Deere tractor models 5200, 5203, 5210, 5300, 5310, 5310N, 5400, 5400N, 5410, 5500, 5500N, 5510, 5510N< li>
  • Replaces John Deere OEM number RE45879< li>
  • Replaces Carraro manufacturer number 350405< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154617)
$188.00
Clutch Plate -
  • For John Deere tractor models 9120, 9220, 9320, 9320T, 9330, 9420, 9420T, 9430, 9430T, 9520, 9520T, 9530, 9530T, 9620, 9620T, 9630, 9630T< li>
  • Replaces John Deere OEM number YZ501788< li> < UL> (Part No: 155949)
$58.00
Clutch Plate -
  • For John Deere tractor models 650, 670, 750, 770, 790< li>
  • Replaces John Deere OEM number M802968< li>
  • Clutch Size: 8-1 2"< li>
  • Clutch Hub: 1-1 8"< li>
  • Clutch Spline: 26< li>
  • Clutch Center: Spring< li>
  • Clutch Type: Woven< li>
  • For a Remanufactured version of this sku use Item #: 205779< li> < UL> (Part No: 163890)
$195.00
Clutch Plate -
  • For John Deere tractor models 3010, 3020 (s n 068000-later)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B< li>
  • Replaces John Deere OEM number AR55661, AR42126< li>
  • Diameter: 12"< li>
  • Spline: 16< li>
  • Spline Diameter: 1.0625"< li>
  • Type: 5 Pad< li> < UL> (Part No: 164985)
$176.50
Clutch Plate -
  • For John Deere tractor model 3010< li>
  • Compatible with John Deere Construction & industrial model 500, 500A, 500B, 500C< li>
  • Replaces John Deere OEM number R41343, R41343N< li> < UL> (Part No: 176693)
$175.16
Clutch Plate, Powershaft - 4.917" O.D., 3.903"ID. For tractor models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. (Part No: 127161)		$41.50
Clutch Plate, Smooth -
  • For John Deere tractor model 3030 (s n 097284-earlier)< li>
  • Compatible with John Deere Construction & industrial model 500 (s n 97284-earlier), 500B< li>
  • Replaces John Deere OEM number R33569, R51329< li> < UL> (Part No: 176689)
$200.48
Clutch Pressure Plate - Used in torsional damper (Power Shift). 9.630" I.D., .375" thick, 3 tang. For tractor models 4040, (4230 from SN# 016359), 4240, 4240 Euro edition, (4430 from SN# 022373), 4440, 4440 Euro edition, (4630 from SN# 008455), 4640, 4840. Replaces R56720. (Part No: 164486)		$84.00
Clutch Pulley - For tractor models 620, 630. (Part No: 126124)		$559.99
Clutch Pulley Brake Pad - For tractor models A, B, 50, 520, 530, 60, 630, 70, 720, 730. Sold individually. Replaces: AB4748R, AF4748R, RE29790 (Part No: 108125)		$11.50
Clutch Pulley Cover - This clutch pulley cover fits the following tractor models: B up to serial number 200999, BO, and BR from serial number 325000 and up. It measures 10 inches in diameter. (Part No: 105724)$42.00
Clutch Release Bearing - Complete with bearing and carrier, this part is used on applications with three ports. It replaces AL120029, 500047620, 510002020, R39242, 510002010 Use on John Deere 2450 serial number below 649118 with Sound Guard Cab, 2650 serial number below 649118 with Sound Guard Cab, 2850 serial number below 649118 with Sound Guard Cab, 3050 serial number below 649118 with Sound Guard Cab, 3150, 3350 serial number below 649118 with Sound Guard Cab, 3650 below serial number 649118, 2250 serial number below 649118 with Sound Guard Cab, 2355, 2450, 2555, 2650 with Synchro-Trans - European Edition, 2650N Synchro-Trans - European Edition, 2755 (GPT), 2850 Synchro-Trans - European Edition, 2855N, 2955 below serial number 767516, 3050 European Edition, 3055 North American, 3150 North American, 3155 North American, 3255 North American, 3350, European Edition, 3640, 3640 European Edition, 3640S, 3640S European Edition, 3650 European Edition. (Part No: 121896)		$295.00
Clutch Release Bearing and Hub - This Clutch Release Bearing and Hub is used on 820, 920, 1020, 1120, 2020, 2120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 2040, 2240, 2840 Replaces AL27231 (Part No: 121895)		$82.98
Clutch Release Carrier Spring - This Spring is used on ohn Deere Tractor models: 1020 (Less Reverser), 1520 (Less Reverser), 1530 (Less Reverser), 2020 (Less Reverser), 2030 (Less Reverser), 2440 (Less Reverser), 2630 (Less Reverser), 2640 (Less Reverser). Also used on John Deere Construction & Industrials: 300, 300B, 301, 301A, 302A, 400, 401, 401B, 401C, 401D. Replaces John Deere part number T21450 (Part No: 161810)		$5.70
Clutch Rod End - This Clutch rod end has Left hand thread. For tractor models 750. (Part No: 184065)		$9.26
Clutch Shaft - 15 16 spline, 23.125" long. For tractor models 1020, 1030, 1120, 1130, 1140, 1350, 1520, (1530 SN# 178601 to 179600), 1550, 1630, 1750, 1830, 1850, 2020, (2030 up to SN# 187300), 2120, 2130, 2150, 2155, 2350, 2355, 820, 830, 840, 940, 1040. (Part No: 173459)		$204.44
Clutch Spring - Three of these springs are used per tractor on John Deere models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630. Sold individually. (Part No: 173319)		$2.46
Clutch Transmission Disc - Clutch Disc, woven 13 inch diameter, 1-3 8 inch - 21 spline hub, for powershift. Tractors: 4440, 4520, 4620, 4630, 4640, 4840. Replaces RE29603, AR57268, AR73542. (Part No: 108532)		$435.00
Clutch Unit -
  • For John Deere tractor models 840, 940, 1040, 1120, 1140, 1350, 1550, 1640, 1750, 1850, 1950, 2150, 2250, 2255, 2350, 2355, 2450< li>
  • Replaces John Deere OEM number R39592, AL120026, AL39592, R39169, AL120027, AL38557< li>
  • Pressure Plate Size: 12-5 8"< li>
  • Pressure Plate Levers: Diaphragm< li>
  • Pressure Plate Springs: Diaphragm< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Clutch Size: 12-5 8"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 15< li>
  • Clutch Center: Spring< li>
  • Clutch Type: 7 Pad< li>
  • Flywheel Step: .845"< li> < UL> (Part No: 177031)
$612.00
Clutch Unit - Diaphragm, Remanufactured -
  • For John Deere tractor models 2040, 2140, 2355, 2355N, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640< li>
  • Clutch Diameter - 12-7 8"< li>
  • Clutch Hub Diameter - 1-1 4"< li>
  • Clutch Splines - 10< li>
  • Clutch Center - Spring< li>
  • Clutch Type - 5 Large Pads< li>
  • Pressure Plate Size - 12-7 8"< li>
  • Hub - 1-3 4"< li>
  • Splines - 27< li>
  • Pressure Plate Type - Diaphragm wth flywheel step .850"< li>
  • Includes pressure plate and engine clutch disc only< li>
  • For a New version of this sku use Item #: 122744< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205235)
$435.01
Clutch Unit - Dual Stage -
  • For John Deere tractor models 670, 770, 790, 3005< li>
  • Replaces John Deere OEM number AM876691, AM878805, LVA800754, LVA801330, R806752< li>
  • Size: 8-1 2"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Hub Diameter: 1-1 8"< li>
  • Pressure Plate Splines: 20< li>
  • Pressure Plate Type: Spring Center< li>
  • Clutch Disc Splines: 20< li>
  • Clutch Hub Diameter: 7 8"< li>
  • Clutch Disc Type: Solid< li> < UL> (Part No: 177000)
$1017.00
Clutch Unit, Remanufactured -
  • For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2440, 2450, 2550, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401C, 401D< li>
  • Includes pressure plate with PTO disc and engine clutch disc only< li>
  • Clutch Diameter: 11"< li>
  • Clutch Hub Diameter: 1"< li>
  • Clutch Splines: 15< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pad< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: Belleville< li>
  • Pressure Plate Hub Diameter: 1-1 2"< li>
  • Pressure Plate Splines: 23< li>
  • Pressure Plate Type: Dual Stage, Flywheel Step 2.200"-2.210"< li>
  • For PIlot Bearing use Item #: 100013< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 203726)
$630.01
Cover Assembly, Clutch - LuK -
  • For John Deere tractor models 840, 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850N, 1950N, 2040, 2150, 2155, 2250, 2255, 2350, 2450, 2650N< li>
  • Replaces manufacturer number 132-0602-12, 132-0602-11< li>
  • Fits 12-5 8" single clutch< li>
  • Shaft: 1-1 2"< li>
  • Spline: 23< li> < UL> (Part No: 166009)
$710.00
Cover Assembly, Clutch - LuK -
  • For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1040, 1130, 1140, 1520, 1530, 1630, 1640, 2020, 2030, 2040, 2120, 2155, 2240, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Replaces manufacturer number 228-0023-23< li>
  • With Rigid Cushioned Organic (RCO) PTO Disc< li>
  • Shaft Diameter: 1-1 2"< li>
  • Spline: 23< li> < UL> (Part No: 166311)
$620.00
Dog, Clutch - For tractor models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Part No: 126127)		$31.50
Dual Clutch Kit - Clutch Kit. Dual Clutch, pressure plate with captured 11 inch 5 pad 1-3 8 inch 19 spline dampened transmission disc (RE64042), 11 inch woven 1 inch 13 spline hub PTO disc (RE45662). For tractors with recessed flywheel. Includes pilot bearing and release bearings. If your flywheel has been resurfaced and the PTO disc is not captive, this is not the correct kit (See RE211277KT). Used on John Deere 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510 Additional $25.00 shipping due to weight. This additional charge will be added to your order. (Part No: 177028)		$806.90
Dual Clutch Kit - This is a new 11 inch, dual stage, clutch kit. It contains PTO Disc RE72536, Pressure Plate Assembly RE211277, Clutch Pilot Bearing 6203, Release Bearing CH18562, PTO Release Bearing CH18554, and alignment tool (not shown). This kit is for tractors with 0.780 inch flywheel step. If both your PTO and Transmission discs are captive in the pressure plate, you need to upgrade your flywheel to use this kit, or see part number RE66695. Additional $25.00 shipping due to weight. This additional charge will be added to your order. (Part No: 168408)		$830.00
Dual Clutch Kit - This is a 9 inch Double Clutch Kit used on John Deere 870, 970 and 1070 Tractors. It has a 1-3 8 inch - 19 Spline Pressure Plate (LVA801352) w Rigid 6 pad ceramic disc 15 16 inch - 13 spline disc (M804454). Includes Release Bearing (CH13099), Pilot Bearing (JD9449) and Alignment Tool. Replaces AM877476, AM878497, AM878798, AM879876, LVU801087, M806764 (Part No: 190880)		$588.99
Dual Pressure Plate Assembly -
  • For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 400, 401< li>
  • Replaces John Deere OEM number R27706, T25109, T27706< li>
  • Pressure Plate Diameter: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 9< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Dual< li>
  • Flywheel Step: 2.200" - 2.210"< li>
  • Includes 9" PTO Clutch Disc< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 163777)
$710.00
Dual Stage Clutch Kit -
  • For John Deere tractor models 5415 (s n 002288-later), 5415 (N), 5425, 5425N, 5525, 5615 (s n 002319-later), 5715 (s n 003601-later), 5725N< li>
  • Replaces John Deere OEM number RE197482< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Hub: 1-3 8"< li>
  • Pressure Plate Splines: 19< li>
  • Clutch Size: 11"< li>
  • Clutch Disc Hub: 1-3 8"< li>
  • Clutch Disc Spline: 19< li>
  • Clutch Disc Center: Spring< li>
  • Clutch Disc Type: 6 Pad< li>
  • PTO Plate Size: 11"< li>
  • PTO Plate Hub: 1"< li>
  • PTO Plate Spline: 13< li>
  • PTO Plate Center: Solid< li>
  • Kit Includes: Pressure Plate, Transmission Disc, PTO Disc, Transmission Release Bearing, PTO Release Bearing, and Pilot Bearing< li> < UL> (Part No: 177038)
$963.00
Flywheel Driven Disc -
  • For John Deere tractor model 1010 (Crawler)< li>
  • Replaces John Deere OEM number AT16435< li>
  • Spline: 10< li>
  • Shaft Diameter: 1.25"< li> < UL> (Part No: 176362)
$243.00
LuK® Pressure Plate -
  • For John Deere tractor models 6100D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603< li>
  • Replaces John Deere OEM number SJ16518, YZ91038< li> < UL> (Part No: 170561)
$1375.00
Pilot Bearing - .6693" I.D. For tractor models 1010, 1020, 105, (1120 Canada single ind. PTO), (1130 Europe single ind. PTO), 1520, 1530, 2010, 2020, 2030, 2040, (2150 reverser), (2155 reverser), 2240, (2355 reverser), 2440, 2510, 2520, (2555 reverser), 2630, 2640. Replaces JD9449, JD8504, AA61722, AT23188, JD29980, JD7180, JD8535 (Part No: 107933)		$3.10
Pilot Bearing - .6693" I.D. For tractor models 2840, (3010 synchro range), (3020 power shift & synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. Replaces CH12908, JD8504, JD8511, JD9281, JD9449 (Part No: 107933)		$3.10
Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 830, 840, 920, 930, 1010, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1720, 1830, 1840, 1850, 1950, 2010, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950. (Part No: 179544)		$23.04
Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For tractor models 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Industrials: 300, 300B, 301, 302, 302A, 350, 350B, 401, 401B, 401C, 401D, 420, 430, 440, 440B, 450, 450C, 450D, 450E, 450G, 480A, 480B, 510, 540, 548B, 548D, 570, 640, 648D, 670. (Part No: 179544)		$23.04
Pilot Bearing - Has .6693 I.D. For tractor models 1050, 950. (Part No: 107933)$3.10
Pilot Bearing - Measures .596 ID, 1.378 OD. For tractor models 300, 301, 400, 401, 1020, 2030 early, 420, 430, 435, 310, 450, 480, 1010, 1020, 2010, 2030 early, 320 early, 330, 40, 850. Replaces CH19289, AL24903, AL28037, JD10107, JD8511, JD9464 (Part No: 108447)		$1.91
Pilot Bearing - This Pilot Bearing fits the following tractor models: 1050, 950, 5200, 5210, 5300, 5400, 5410, 5425, 5500, 5520, 300B, 301A, 302, 302A, 401B, 401C, 401D, 500, 500A, 500B, 500C, 3038, and 3155. It measures 1.4375 inches inside diameter, 2.676 inches outside diameter, and .587 inches thick. Replaces part numbers: JD8504 and JD9449. (Part No: 107933)		$3.10
Planetary Disc, 4th - 54 internal splines, 7.005" O.D.. For tractor models (1020, 2020, 2030, 2355, 2555 all with reverser trans), (300B with reverser), (2240 with reverser trans & SN# 350000 and up), (2155, 2355N all with directional reverser trans.), (2520 with powershift 2 plate clutch, 3 plate clutch or with PTO), (4230 with powershift SN# up to 028120), (4430 with powershift SN# up to 244988). Replaces R31404, RE23000. (Part No: 114639)		$25.00
Pressure Plate - Pressure Plate: 10 inch, Single, 3 Lever, 27 spline, dia. 1.750 (Part No: 130099)		$158.00
Pressure Plate - 10", 3 lever. For tractor models G, M, MT, 105, 3300, 320, 330, 40, 45, 55, 95, 40C, (420, 430, SN# 99999 and below), 440. Replaces: AM227T, AM2576T, AM650T . (Part No: 162165)		$122.00
Pressure Plate - 11" with .820" flywheel step, 1.5" spline diameter, 23 spline. For tractor models 1020, 1520, 1530, 2020, 2030, 2440, 2630, 2640. All with indep. PTO and no reverser. (Part No: 156619)		$305.00
Pressure Plate - For tractor models 650, 750. (Part No: 130084)		$71.00
Pressure Plate - For tractor models 670, 770 with single clutch. (Part No: 130098)		$111.00
Pressure Plate - For tractor models (850, 950 with single clutch). (Part No: 115042)		$121.00
Pressure Plate - Pressure Plate, 12", 26 spline, 1-11 16" hub. For tractor models 3010, 3020 (prior to SN# 097284). (Part No: 179548)		$583.00
Pressure Plate - This cast iron pressure plate fits the following tractor models: 1641, 1641F, 2040S, 2140, 2355N, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3355, 3640, and 3640S. It measures 13 inches in diameter, and has 27 splines, with a spline diameter of 1.75 inches. It replaces part numbers: AL68486, AL68485, and AL60308. Additional $15.00 shipping due to weight. (Part No: 163897)		$467.30
Pressure Plate -
  • For John Deere Construction & industrial models 340D, 440C, 440D, 448D< li>
  • Replaces John Deere OEM number AT90025, AT156740< li> < UL> (Part No: 166285)
$480.00
Pressure Plate -
  • For John Deere Construction & industrial models 400G, 450B, 450C, 450D, 450E, 455D, 455E< li>
  • Replaces John Deere OEM number AT104326< li>
  • 3 lever (Power Shift)< li> < UL> (Part No: 176349)
$250.00
Pressure Plate -
  • For John Deere tractor models 1520 (Less Independent PTO and Reverser), 2020 (Less Independent PTO and Reverser), 2030 (Less Independent PTO and Reverser)< li>
  • Compatible with John Deere Construction & industrial models 300 (s n: 157640-later), 300B (less Independent PTO), 301A (less Independent PTO), 302 (less Independent PTO), 302A (less Independent PTO), 350 (less Independent PTO), 350B (less Independent PTO), 400 (less Independent PTO), 401 (less Independent PTO), 401B (less Independent PTO), 401C (less Independent PTO), 401D (less Independent PTO), 450 (with Hi-Lo Reverse)< li>
  • Replaces John Deere OEM number AT25817< li>
  • Diameter: 11"< li> < UL> (Part No: 176359)
$277.60
Pressure Plate, 11 - For tractor models 300, 300B, 301, 301A, 302, 302S, 400, 401, 401B, 401C, 401D, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1750V, 1850, 1850V, 1950, 1950N, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2450F, 2630, 2640. Replaces AL18714, AL39624, AL55140, AL18714-R, 1L30151, AL40882, AL55140-R, AT25482, R18714, R25109, R25109-1, R27706, R55140, T25109-R, T27706-R, VPG1079, 228002323, 228002310, SW01215, TP-T27706. (Part No: 150754)		$425.60
Pressure Plate, 11 inch - Without release plate. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, (2120, 2155 with Ind. PTO), 2130, 2240. Replaces AL39618, AL19084, AL56167, AL32965. (Part No: 122792)		$440.00
Pressure Plate Assembly -
  • For John Deere tractor models 5225, 5325, 5425, 5525, 5603, 5625, 5725< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: Belleville< li>
  • Pressure Plate Hub Diameter: 1-1 2"< li>
  • Pressure Plate Spline: 24< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 122782)
$975.00
Pressure Plate Assembly -
  • For John Deere tractor model 2130< li>
  • Pressure Plate Size: 12-5 8"< li>
  • Pressure Plate Levers: Diaphragm< li>
  • Pressure Plate Springs: Diaphragm< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 122918)
$750.00
Pressure Plate Assembly -
  • For John Deere tractor models 840, 940, 1040, 1120, 1130, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2150, 2155, 2250, 2255, 2350, 2355, 2450< li>
  • Replaces John Deere OEM number AL39592, AL120026, AL120027, AL38557< li>
  • Pressure Plate Size: 12-5 8"< li>
  • Pressure Plate Levers: Diaphragm< li>
  • Pressure Plate Springs: Diaphragm< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Single Stage< li>
  • For a Remanufactured version of this sku use Item #: 205834< li> < UL> (Part No: 122919)
$500.00
Pressure Plate Assembly -
  • For John Deere tractor models 2040, 2040S, 2140, 2355, 2355N, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640< li>
  • Replaces John Deere OEM number RE18678, AL68485, AL59324, AL55240, AL39591, AL65891, AR18678< li>
  • Pressure Plate Size: 12-7 8"< li>
  • Pressure Plate Hub: 1-3 4"< li>
  • Pressure Plate Spline: 27< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 122920)
$830.00
Pressure Plate Assembly -
  • For John Deere tractor model 2010< li>
  • Compatible with John Deere Construction & industrial model 340, 440, 440A, 440C, 448, 2010< li>
  • Replaces John Deere OEM number AT17767, AT13432< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Hub: 1-3 4"< li>
  • Pressure Plate Spline: 27< li>
  • Pressure Plate Type: Single Stage< li>
  • For a Remanufactured version of this sku use Item #: 203625< li> < UL> (Part No: 150287)
$399.00
Pressure Plate Assembly -
  • For John Deere tractor models 2130, 2140, 2250, 2550, 2750, 2840, 2850, 2940, 2950, 3030, 3040, 3120, 3130, 3140< li>
  • Replaces John Deere OEM number AL120025, AL26781, AL28039, AL33098, AL33127.< li>
  • Pressure Plate Size – 12"< li>
  • Pressure Plate Hub - 1.75"< li>
  • Pressure Plate Splines - 27< li>
  • Pressure Plate Levers – 3< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Center - Solid< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 150761)
$410.00
Pressure Plate Assembly -
  • For John Deere Construction & industrial models 340 (s n 21830 - earlier, s n 25708 - 109737), 440 (s n 21830 - earlier, s n 25708 - 109737), 440A (s n 21830 - earlier, s n 25708 - 109737), 440C (s n 21830 - earlier, s n 25708 - 109737), 448 (s n 21830 - earlier, s n 25708 - 109737)< li>
  • Replaces John Deere OEM number AT156740, AT90025< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Hub: 1-3 4"< li>
  • Pressure Plate Spline: 27< li>
  • Pressure Plate Type: Single Stage< li>
  • For a Remanufactured version of this sku use Item #: 205861< li> < UL> (Part No: 160852)
$560.00
Pressure Plate Assembly -
  • For John Deere tractor models 5103, 5203, 5210, 5220, 5303, 5310, 5320, 5403, 5410, 5415, 5420, 5510, 5605, 5615, 5625, 5715< li>
  • Replaces John Deere OEM number RE211277, R72534U2K, RE72534, RE72860, RE73611< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: Belleville< li>
  • Pressure Plate Hub: 1-3 8"< li>
  • Pressure Plate Spline: 19< li>
  • Pressure Plate Type: Dual Stage< li>
  • For a Remanufactured version of this sku use Item #: 205821< li> < UL> (Part No: 163888)
$810.00
Pressure Plate Assembly -
  • For John Deere Construction & industrial models 440, 440B, 540, 540A, 540B, 540D, 570, 570A, 570B (s n 547202-earlier), 640, 640D, 648D, 670, 670A, 670B, 672B< li>
  • Replaces John Deere OEM number AT43219< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Type: Single Stage< li>
  • For a Remanufactured version of this sku use Item #: 205843< li> < UL> (Part No: 165193)
$265.00
Pressure Plate Assembly -
  • For John Deere Construction & industrial models 450, 450B< li>
  • Replaces John Deere OEM number AT18416< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Type: Single Stage< li>
  • For a Remanufactured version of this sku use Item #: 205818< li> < UL> (Part No: 176358)
$268.19
Pressure Plate Assembly, 10 Inch - Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT22064, AT60368, R22064 (Part No: 158074)		$113.00
Pressure Plate Assembly, 11 Inch - This is a Single Stage, 11 Inch Pressure for a Flat Flywheel. Used on 450B, 450C, 450D, (450E Serial Number Below 720887), 455D, (455E Serial Number Below 720891), (300B, 401C Both Less Reverser). Replaces AT43120, AT35213, 71163702, D1163702 (Part No: 130136)		$181.00
Pressure Plate Assembly, Heavy Duty -
  • For John Deere tractor models 2440 (Independent PTO, Less Reverser), 2630 (Independent PTO, Less Reverser), 2640 (Independent PTO, Less Reverser)< li>
  • Compatible with John Deere Construction & industrial models 301 (Heavy Duty With Independent PTO), 301A (Heavy Duty With Independent PTO), 302 (Heavy Duty With Independent PTO), 401 (Heavy Duty With Independent PTO), 401B (Heavy Duty With Independent PTO), 401D (Heavy Duty With Independent PTO)< li>
  • Replaces John Deere OEM number RE22610< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Hub: 1.5"< li>
  • Pressure Plate Splines: 23< li>
  • Pressure Plate Type: Heavy Duty Single Stage< li> < UL> (Part No: 173442)
$734.00
Pressure Plate Assembly, Remanufactured -
  • For John Deere tractor models 5210, 5220, 5310, 5320, 5410, 5420, 5510, 5520< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 24< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 205792)
$1125.01
Pressure Plate Assembly, Remanufactured -
  • For John Deere tractor models 500, 3010, 3020< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Hub: 1-11 16"< li>
  • Pressure Plate Spline: 26< li>
  • Pressure Plate Type: Dual Stage< li>
  • Includes 4 Pad PTO Disc< li> < UL> (Part No: 205829)
$600.01
Pressure Plate Assembly, Remanufactured -
  • For John Deere tractor models 2510, 2520< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Type: Single Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205832)
$136.01
Pressure Plate Assembly, Remanufactured -
  • For John Deere tractor model 4320< li>
  • Pressure Plate Size: 13"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 15< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type:Dual Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205841)
$640.01
Pressure Plate Assembly, Remanufactured -
  • For John Deere tractor model 4320< li>
  • Pressure Plate Size: 13-1 2"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 15< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type:Dual Stage< li> < UL> (Part No: 205842)
$670.01
Pressure Plate Assembly, Remanufactured -
  • For John Deere tractor models 2040, 2140, 2355, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640< li>
  • Pressure Plate Size: 12-7 8"< li>
  • Pressure Plate Levers: Diaphragm< li>
  • Pressure Plate Springs: Diaphragm< li>
  • Pressure Plate Hub: 1-3 4"< li>
  • Pressure Plate Spline: 27< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 205851)
$223.01
Pressure Plate Assembly, Remanufactured, AL120025 -
  • For John Deere tractor models 2040, 2140, 2940 (s n 415944 - earlier), 3040, 3140< li>
  • Replaces John Deere OEM number AL120025, AL33127< li>
  • Pressure Plate Size: 12-5 8"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Hub: 1-3 4"< li>
  • Pressure Plate Spline: 27< li>
  • Pressure Plate Type: Single Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205830)
$331.01
Pressure Plate Assembly, Remanufactured, AL18174 -
  • For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2450< li>
  • Replaces John Deere OEM number AL18174, AL30151, AL39624, AL40882, AL55140, AT27793< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 1 Belleville< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Dual Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205846)
$495.01
Pressure Plate Assembly, Remanufactured, AL23095 -
  • For John Deere tractor model 2130< li>
  • Replaces John Deere OEM number AL23095< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Single Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205825)
$315.01
Pressure Plate Assembly, Remanufactured, AM2576T -
  • For John Deere tractor models M, 40, 320, 330, 420, 430, 435, 440< li>
  • Replaces John Deere OEM number AM2576T< li>
  • Pressure Plate Size: 10"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 204607)
$113.01
Pressure Plate Assembly, Remanufactured, AR100649 -
  • For John Deere tractor models 1020, 1120, 1520, 2020, 2030, 2120, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 301, 301A, 302, 401A, 401B, 401D, 448D< li>
  • Replaces John Deere OEM number AR100649, AR76395, AT30046< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Single Stage< li>
  • For a New version of this sku use Item #: 156619< li> < UL> (Part No: 204585)
$179.01
Pressure Plate Assembly, Remanufactured, AR63785 -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C< li>
  • Replaces John Deere OEM number AR63785, AT22064, AT60368< li>
  • Pressure Plate Size: 10"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 205847)
$161.01
Pressure Plate Assembly, Remanufactured, AT11853T -
  • For John Deere tractor models 420, 430, 1010< li>
  • Compatible with John Deere Construction & industrial models 40, 440< li>
  • Replaces John Deere OEM number AT11853T< li>
  • Pressure Plate Size: 8-1 2"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 205810)
$120.01
Pressure Plate Assembly, Remanufactured, AT16053 -
  • For John Deere tractor models 1010, 2010< li>
  • Replaces John Deere OEM number AT16053< li>
  • Pressure Plate Size: 10"< li>
  • Pressure Plate Hub: 1-3 4"< li>
  • Pressure Plate Spline: 27< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 3< li>
  • Pressure Plate Type: Single Stage< li>
  • For a New version of this sku use Item #: 130099< li> < UL> (Part No: 205813)
$126.01
Pressure Plate Assembly, Remanufactured, AT43219 -
  • For John Deere Construction & industrial models 440, 480, 500, 510, 540, 548, 570, 640, 648, 670< li>
  • Replaces John Deere OEM number AT43219< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Type:Single Stage< li>
  • For a New version of this sku use Item #: 165193< li> < UL> (Part No: 205843)
$124.01
Pressure Plate Assembly, Remanufactured, R40806 -
  • For John Deere tractor models 3020, 4000, 4020, 4230, 4430< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500C, 510< li>
  • Replaces John Deere OEM number R40806< li>
  • Pressure Plate Size: 13"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Type: Single Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205839)
$136.01
Pressure Plate Assembly, Remanufactured, R43163 -
  • For John Deere tractor models 4520, 4620, 4630 (s n 008454 - earlier)< li>
  • Compatible with John Deere Construction & industrial models 740, 743, 760 (Series A), 770 (Motor Grader)< li>
  • Replaces John Deere OEM number R43163< li>
  • Pressure Plate Size: 13"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 15< li>
  • Pressure Plate Type: Single Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205840)
$195.01
Pressure Plate Assembly, Remanufactured, RE153027 -
  • For John Deere tractor models 500, 3010, 3020< li>
  • Replaces John Deere OEM number RE153027< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 12< li>
  • Pressure Plate Hub: 1-11 16"< li>
  • Pressure Plate Spline: 26< li>
  • Pressure Plate Type: Dual Stage< li>
  • Includes Fiber PTO Disc< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 204180)
$810.01
Pressure Plate Assembly, Remanufactured, RE153030 -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number RE153030, RE179192, RE179193< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 15< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type: Dual Stage, Flywheel Step 2.844"< li>
  • Synchro Range Clutch< li>
  • Woven PTO Disc< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 204235)
$610.01
Pressure Plate Assembly, Remanufactured, RE153030 -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number RE153030, RE179192, RE179193< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 15 (Heavy Duty)< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type: Dual Stage, Flywheel Step 2.844"< li>
  • Synchro Range Clutch< li>
  • Woven PTO Disc< li> < UL> (Part No: 205837)
$630.01
Pressure Plate Assembly, Remanufactured, RE153030 -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number RE153030, RE179192, RE179193< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 15 (Heavy Duty)< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type: Dual Stage, Flywheel Step 2.844"< li>
  • Synchro Range Clutch< li>
  • Heavy Duty 6 Pad PTO Disc< li> < UL> (Part No: 205838)
$660.01
Pressure Plate Assembly, Remanufactured, RE153030, RE179192, RE179193 -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces John Deere OEM number RE153030, RE179192, RE179193< li>
  • Pressure Plate Size: 12"< li>
  • Pressure Plate Levers: 6< li>
  • Pressure Plate Springs: 15< li>
  • Pressure Plate Hub: 1-7 8"< li>
  • Pressure Plate Spline: 29< li>
  • Pressure Plate Type: Dual Stage, Flywheel Step 2.844"< li>
  • Synchro Range Clutch< li>
  • 6 Pad PTO Disc< li> < UL> (Part No: 205836)
$650.01
Pressure Plate Assembly, Remanufactured, RE42516 -
  • For John Deere tractor models 5200, 5210 (s n 321732 - earlier), 5300, 5310 (s n 332983 - earlier), 5400, 5410 (s n 342178 - earlier), 5500, 5510 (s n 351745 - earlier)< li>
  • Replaces John Deere OEM number RE42516, RE67588< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: Belleville< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 24< li>
  • Pressure Plate Type: Single Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205850)
$622.36
Pressure Plate Assembly, Remanufactured, T25109 -
  • For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2440, 2450, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 401< li>
  • Replaces John Deere OEM number T25109, T27706< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 9< li>
  • Pressure Plate Hub: 1-1 2"< li>
  • Pressure Plate Spline: 23< li>
  • Pressure Plate Type: Dual Stage< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205826)
$720.01
Pressure Plate Assembly With 2 Discs - Carraro -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number RE67588< li>
  • Replaces Carraro manufacturer number 351373< li>
  • Pressure Plate Size: 11"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: Belleville< li>
  • Pressure Plate Hub Diameter: 1-1 2"< li>
  • Pressure Plate Spline: 24< li>
  • Pressure Plate Type: Single Stage< li>
  • Transmission Disc Hub: 1-9 16"< li>
  • Transmission Spline: 24< li>
  • PTO Disc Hub: 15 16"< li>
  • PTO Disc Spline: 13< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154726)
$1425.00
PTO Clutch Disc - PTO clutch disc, new, 11 diameter, 1-7 8 hub, 29 spline, with woven facing. For tractors: 4000, 4010, 4020, 4320. For 4010, 4020 (Part No: 130090)		$78.00
PTO Clutch Disc - Used on John Deere models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760. The measurements on this disc are; inside diameter 5 7 8 inches (148mm) with 48 teeth, outside diameter 12 1 16 inches (306mm). Lining Inside Diameter 7.000 inches. Lining Outside Diameter 12.000 inches. Replaces AR60082, RE234306 (Part No: 127049)		$55.00
PTO Clutch Disc - Organic -
  • For John Deere tractor models 850 (s n 16001-later), 870 (s n 16001-later), 900 (HC), 950 (s n 16001-later), 970, 990, 1050, 1070, 4005< li>
  • Replaces John Deere OEM number M804454< li>
  • Outside Diameter: 8.843"< li>
  • Spline Count: 13< li>
  • Spline Diameter: .983"< li> < UL> (Part No: 176605)
$100.80
PTO Clutch Hub - Made to OEM Specifications, this New PTO Clutch Hub replaces John Deere part numbers R50123 and R56854. 35 internal teeth, 48 external teeth. It is used on John Deere models; 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430, 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission) (Part No: 173221)		$242.60
PTO Clutch Plate - Used on John Deere Models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960. This New PTO Clutch Plate measures: inside diameter 6 11 16 inches (177mm), outside diameter 14 3 16 inches (360mm) including 6 tabs. Replaces R51800, R59689. (Part No: 127098)		$87.00
PTO Disc - Organic Woven style for Double Clutch on Models 1050, 1070, 4005, 850, 870, 900, 950, 970, 990. Replaces OEM Numbers CH13090, LVU801087, M804454, M806764. Heavy-duty organic disc, 9 inch diameter, 15 16 inch 13 spline hub. (Part No: 162830)		$103.00
PTO Plate, Remanufactured -
  • For John Deere tractor models 4000, 4010, 4020, 4320< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-7 8"< li>
  • Clutch Spline: 29< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 6 Pads< li> < UL> (Part No: 205873)
$120.01
PTO Plate, Remanufactured, AL16777 -
  • For John Deere tractor model 710< li>
  • Replaces John Deere OEM number AL16777< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-1 8"< li>
  • Clutch Spline: 10< li>
  • Clutch Center: Solid< li> < UL> (Part No: 205868)
$131.01
PTO Release Bearing - Greaseable -
  • For John Deere tractor models 4000, 4010, 4020, 4320< li>
  • Replaces John Deere OEM number AR27447< li>
  • 2.758" ID< li>
  • 4.328" OD< li>
  • .784" Thick< li> < UL> (Part No: 110490)
$62.00
Pulley Clutch Facing without Rivets - 6.980" O.D., 4.14" I.D., .156" thick. For tractor models 50, 520, 530, (B SN# 201000 and up). Replaces B2357R, B2354R. (Part No: 172336)		$54.00
Release Bearing - For tractor models 2510, 2520, 3010, 3020. (Part No: 121891)$26.80
Release Bearing - Clutch release bearing, for tractor models using bearing carrier R51469. For tractor models 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Aetna A3544, A3544-15). 3.7960 outside diameter, 2.2495 bore, .8110 wide. For 4000, 4010, 4020. (Part No: 100013)$21.25
Release Bearing - This release bearing measures 2.203 inches inside diameter, 3.803 inches outside diameter and .8085 of an inch width. For tractor models 1010, 2010, 2020, 300, 400. (Part No: 100013)		$21.25
Release Bearing - For tractor models 650, 670, 750, 770, 790. (Part No: 108022)		$27.26
Release Bearing - For tractor models (850, 950 with single clutch).Clutch release bearing (with single clutch). I.D. 1.771", O.D. 2.900", Thickness .700". (Part No: 108054)		$39.65
Release Bearing - I.D. 2.557", O.D. 3.936", Thickness .704". For tractor models 1450, 1650, 2510, 2520, 3010, 3020, 5010, 5020, 5200, 5210, 5215, 5220, 5300, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5515, 5520, 5605, 5615, 5705, 5715, 6030, 7520. (Part No: 107477)		$13.70
Release Bearing - Release bearing for models 1040, 1040V, 1140, 1140F, 1140V, 1350, 1550, 1640, 1640F, 1641, 1641F, 1750, 1750V, 1840, 1840F, 1850, 1850F, 1850V, 1950, 1950F, 1950N, 2040, 2040F, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2250F, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2450F, 2541, 2550, 2555, 2640, 2650, 2650F, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3651, 840, 940. 1.955 inch inside diameter, 2.250 inches tall. Replaces AL28860, AL37539, AL39541, AL39931, AL39541, VPG5062, 500013920, 500024811, 50002481 2. (Part No: 113755)		$65.00
Release Bearing - Used with (Dual clutch), 2.164" I.D., 3.450" O.D., .765" Thickness. For tractor models 670, 770, 790, 850, 870, 950, 970, 1050, 1070. (Part No: 108119)$47.80
Release Bearing With Carrier - This release bearing comes complete in carrier and fits the following tractor models: 2250, 2355, 2450, 2555, 2650, 2750, 2755, 2850, 2955, 3050, 3055, 3150, 3155, 3255, 3350, and 3640. It is the new Luk style hydraulic type design that has a 2 port slave cylinder with a sound guard cap. Use Original Brake Fluid Only. DOT 3, DOT 4, DOT 4+, SAE 1703 Replaces: AL66088, 500068420, 510002120, AL120028 (Part No: 121897)		$175.00
Remanufactured Clutch Kit - Clutch kit, for transmission and PTO clutch. Includes remanufactured pressure plate assembly, 12 with 11 PTO disc, 29 spline, 1-7 8 hub~ remanufactured clutch disc, 12, 19 spline, 1-1 4 hub, woven lining~ new clutch and PTO release bearings(2) and For tractor models 4010, 4020. Refundable $107.00 core charge will be added to your order. *** This additional charge will be added to your order.*** (Part No: 202064)		$870.01
Single Stage Clutch Kit, 12-1/4" -
  • For John Deere tractor models 6100D (s n 050000-earlier), 6110D (s n 050000-earlier), 6115D (s n 050000-earlier), 6125D (s n 050000-earlier), 6130D (s n 050000-earlier), 6140D (s n 050000-earlier)< li>
  • Replaces John Deere OEM number YZ91518, YZ91592< li>
  • Size: 12.1 4"< li>
  • Levers: 3< li> < UL> (Part No: 186305)
$1005.00
Syncro Disc - 3.250" I.D., 4.225" O.D.. For tractor models (2010, 2520, 4000, 4010, 4020, 4430 with syncro range), (4030 with syncro quad), (4230 with syncro quad SN# up to 037595), (4430 with syncro quad up to SN# 066737). (Part No: 127145)		$11.76
Traction Clutch Hub - Used on John Deere models; 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430 (Quad and Syncro Range Transmission), 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission), this hub has 19 splines and 48 Teeth. (Part No: 173339)		$231.00
Transmission and PTO Clutch Plate - Manufactured to OEM specifications, this new Transmission and PTO Clutch Plate is used on John Deere models: 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455. It measures 6 15 16 inches (176mm) inside diameter, 14 1 4 inches (362mm) outside diameter including 6 tabs, 12.140 inches outside diameter without the tabs. Replaces John Deere part numbers R112385, R544016, R62285, R53789, R59688, R62285 (Part No: 127077)		$115.00
Transmission Cast Plate -
  • For John Deere tractor models 3010, 3020< li>
  • Replaces John Deere OEM number R33569< li>
  • Replaces John Deere Casting number R26835< li>
  • Used with intermediate cast plate stamped R26835< li>
  • Size: 12"< li> < UL> (Part No: 177033)
$112.00
Transmission Disc -
  • For John Deere Construction & industrial model 450 (With Hi-Lo Reverse Transmission)< li>
  • Replaces John Deere OEM number AT21500, AT141683< li>
  • Spline Count: 10< li>
  • Spline Diameter: 1.250"< li>
  • Diameter: 11"< li>
  • Center: 6 Springs< li> < UL> (Part No: 175858)
$239.00
Transmission Disc -
  • For John Deere tractor models M, MT, 40, 420, 430< li>
  • Compatible with John Deere Combine(s) 45 (s n 35001-later), 55, 95, 105, 3300< li>
  • Compatible with John Deere Construction & industrial models 440< li>
  • Replaces John Deere OEM number AH64100< li>
  • Size: 10"< li>
  • Hub Size: 1-3 8"< li>
  • Splines: 10< li>
  • Center: Solid< li>
  • Type: Woven< li> < UL> (Part No: 177013)
$106.00
Transmission Disc: 11", Organic, Spring Loaded, 7" Dampener -
  • For John Deere Construction & industrial models 450B, 450C, 450D, 450E (s n: 720887-earlier), 450J (s n: 159987-later), 455D, 455E (s n: 720891-earlier), 550J (Tier III, s n: 159987-later), 650J (Tier III, s n: 159987-later)< li>
  • Compatible with John Deere Engine(s) 4045 (HT059), 4045 (HT074)< li>
  • Replaces John Deere OEM number AT33424, AT160477, AT117816, AT82040< li>
  • Disc Diameter: 11"< li>
  • Splines: 10< li>
  • Shaft Diameter: 1.250"< li> < UL> (Part No: 173426)
$196.00
Transmission Plate - 4.125" O.D., 3.152" I.D.. For tractor models (2010, 2520, 4000, 4010, 4020, 4430 with syncro range), (4030 with syncro quad), (4230 with syncro quad SN# up to 037595), (4430 with syncro quad up to SN# 066737). (Part No: 152147)		$5.36
 
Cooling System
Air Charge Cooler -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560271< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165245)
$1158.10
Air Conditioning Compressor - 12 volt clutch, 5.76" clutch diameter, single groove pulley, R12 & R143 compatible. Models: 2355, 2555, 2755, 2855N, 2955, 3055, 3155, 3244, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8560, 8650, 8760, 8850. (Part No: 114078)		$285.00
Air Conditioning Compressor - Air conditioning compressor, A6 w single groove clutch no oil , 12 volt coil at 10 o'clock, new 5.58 inch dia. clutch & dust cover, superheat compressor, high pressure relief valve. SAE thread, Replaces 272003. Tractors: 1640, 2040, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3155, 3350, 3640, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8440, 8630, 8640, 2040S, 2855N, 4040S, 4240S, 8430 4WD. Super Heat switch (part number 220-5000) and M10X50 manifold manifold bolt are not included. Replaces 904014M92, 70735521, 79005837, 79005837GV, 1904014M92GV, 70735521GV, 500001, TPTY6665GV, TP-TY6665GV, TY6665, 1904014M1, 1904014M91, AR60948, AR68802, AR77343, AR92109, RE60697, SE501456, SE501457, SE503047 (Part No: 176869)		$800.00
Air Conditioning Receiver Dryer - 4" x 7-1 2" overall, inlet & outlet#6 female o-ring with sight glass. R12 & R134A compatible. Replaces AL77581, AR59780, AR74486, RE214439, RE291794, RE49169 (Part No: 110938)		$22.00
Bearing - Water Pump Shaft -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier), 4040, 4230, 4320, 4430, 4520, 4620, 4630, 4640 (s n 211131-earlier), 4840 (s n 211131-earlier), 5010, 5020 (s n 024999-earlier), 6030, 7020 (s n 335845-earlier), 8430, 8440 (s n 211131-earlier)< li>
  • Compatible with John Deere Combine(s) 925, 935, 945, 955, 965, 968, 1032, 1042, 1052, 1055, 3300, 4400, 4420, 6600< li>
  • Compatible with John Deere Construction & industrial models 350, 350B (s n 168350-earlier), 450, 450B (s n 168638-earlier), 450B (s n 323694-earlier), 500, 600, 644 (s n 323694-earlier), 644A (s n 323694-earlier), 760< li>
  • Replaces John Deere OEM number JD9257< li>
  • Overall Length: 5.75"< li>
  • Shaft Size: .746"< li>
  • O.D.: 1.50"< li> < UL> (Part No: 140541)
$18.05
Belt Tensioner - This Belt Tensioner is used on used to engine serial number 159438 on 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6506, 6600, 6800, 6900, SE6100, SE6200, SE6300, SE6400. Replaces AL77334 (Part No: 161815)		$40.00
Belt Tensioner - This Belt Tensioner is used on John Deere models 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8520, 8520T. Replaces RE164876, RE193648, 87409564, 87436755, J934819, J945527, J945849, 87436755, 87775209, J945849. (Part No: 125064)		$78.00
Belt, Water Pump / Alternator - This belt is used on John Deere 300B, 2420, 1020, 1520, 1530 with Motorola Alternator, 2020, 2030 diesel, 2040 below serial number 349999, 2130, 2240 below serial number 340999, 2440, 820 3 Cylinder above serial number 75345, 830 3 Cylinder. It measures 0.688 inches wide by 49.25 inches. REC (Raw Edge Cogged) Polyester Cord. Replaces R97758, T20334 (Part No: 115444)		$15.38
Block Heater Engine - Engine coolant heater 12 cord. 1000 watt, 120 volt. Fits 2 diameter smooth bore core hole. For 400 and 500 series engines including: 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8440, 8630, For 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6620, 7020, 7520, 7700, 7720, 8430, 8440, 8630, 8640, 8820 (Part No: 111620)$90.72
Charge Air Cooler -
  • For John Deere tractor models 4520, 4720< li>
  • Replaces John Deere OEM number LVA15119< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156404)
$513.70
Charge Air Cooler -
  • For John Deere tractor models 7200R, 7215R, 7230R< li>
  • Replaces John Deere OEM number RE287862< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156405)
$1420.60
Charge Air Cooler -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE61307< li>
  • Core Height: 29-7 8"< li>
  • Core Width: 10"< li>
  • Depth: 4"< li>
  • Inlet: 3< li>
  • Outlet: 3< li> < UL> (Part No: 158403)
$1200.00
Charge Air Cooler -
  • For John Deere tractor models 7230R, 7260R, 7280R< li>
  • Replaces John Deere OEM number RE310076< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160231)
$1458.70
Charge Air Cooler -
  • For John Deere Construction & industrial models 210K, 210L, 310K, 310KEP, 310SK, 310SKTC, 325SK, 410K, 410KTC< li>
  • Replaces John Deere OEM number AT369971< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160240)
$1024.30
Charge Air Cooler -
  • For John Deere tractor models 5085E, 5085M, 5100E, 5100M, 5100MH, 5100ML, 5115M, 5115ML, 6105D (s n 050001-later), 6115D< li>
  • Replaces John Deere OEM number SJ26168, SJ20631< li>
  • Heavy Duty, All Aluminum< li>
  • Core Dimensions: 17"x 15 3 4"x 2"< li>
  • Overall Dimensions: 20 1 4"x 18 3 4"x 2 1 2"< li>
  • Inlet Diameter: 2"< li>
  • Outlet Diameter: 2"< li> < UL> (Part No: 173171)
$450.00
Compressor Conversion Kit - Used to Convert A6 Compressor To New Denso Compressor, this kit contains New Compressor, Conversion Lines, O-rings and Connectors, Hardware & Brackets, Fuse Elimination Kits, Harness with Pressure Switches, Receiver Dryer, Belt. Note: if using R134 freon, order 461-3111 and 461-3112 fittings for charging system ports. For John Deere 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840 (Part No: 111863)		$868.80
Compressor Switch - This is a Super Heat switch use with TY6665 compressor. Replaces AR78501, 220-239, 70262354, 837255M91 (Part No: 121476)		$37.10
Condensor/Oil Cooler - For tractor models 4040, 4230, 4430, 4630. New condenser oil cooler that is 20 1 8" wide and 18 7 8" high. Replaces 400-605 (Part No: 110095)$330.00
Cooling Fan - 6 Blade -
  • For John Deere tractor models 2940, 2950, 3040 (European), 3140 (European), 3150, 4030, 4040, 4230 (gas), 4230< li>
  • Compatible with John Deere Hay Cutting(s) 3830, 4890< li>
  • Replaces John Deere OEM number AR64075< li>
  • 6 metal blades< li>
  • 21" diameter< li>
  • 1.5" pilot hole< li>
  • 8 mounting holes on 1.0625" centers< li>
  • For Used Sku use Item #: 498465< li> < UL> (Part No: 155268)
$99.00
Cooling Fan - 7 Blade -
  • For John Deere tractor model 2630< li>
  • Compatible with John Deere Construction & industrial model 210C, 310A, 310B, 401B, 401C, 401D, 410, 480A, 480B, 480C, 482C, 570, 570A< li>
  • Replaces John Deere OEM number AT170040< li>
  • Blades: 7< li>
  • Diameter: 18"< li>
  • Pilot Hole: 1.5"< li>
  • Mounting Holes: 8 on 1" Centers< li> < UL> (Part No: 151077)
$91.00
Cooling Fan - 7 Blade -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6500, 6500L, 6510L, 6510S, 6605, 7200, 7210, 7400, 7405, 7410, 7505, 7510, 7515< li>
  • Replaces John Deere OEM number L79028< li>
  • 7 blades< li>
  • Diameter: 21"< li>
  • Pilot Hole: 3-1 2"< li>
  • Mounting Holes on 2-11 16" Centers< li> < UL> (Part No: 154292)
$131.00
Cooling Fan - 7 Blade -
  • For John Deere tractor models 5210 (Without Cab), 5220 (Without Cab), 5300 (Without Cab), 5310 (Without Cab), 5320 (Without Cab), 5400 (Without Cab), 5400N (Without Cab), 5500N (Without Cab)< li>
  • Replaces John Deere OEM number RE42511, RE73671< li>
  • 16" Diameter< li>
  • 1-1 2" Pilot hole< li>
  • Mounting holes on 1-3 4" centers< li> < UL> (Part No: 163850)
$90.30
Cooling Fan, 8 Blades -
  • For John Deere tractor models 8410, 8410T< li>
  • Replaces John Deere OEM number RE163373< li>
  • Mounting Holes: 6< li>
  • Blades: 8< li>
  • Plastic Blades< li> < UL> (Part No: 169041)
$175.00
Cover - Thermostat, R97876, R70736 -
  • For John Deere tractor models 840 (s n 599999-earlier), 940, 1040, 1140, 1350 (European s n 751253-earlier), 1550 (European s n 751243-earlier), 1640, 1750 (European s n 751243-earlier), 1840, 1850 (European s n 751243-earlier), 2040, 2140, 2150, 2155, 2240 (s n 350000-later), 2250 (European s n 792266-later), 2255, 2350, 2355, 2450 (European s n 792266-later), 2550, 2555, 2650 (European s n 792266-later), 2750, 2755, 2850 (European s n 792266-later), 2855, 5200, 5300, 5400, 5500< li>
  • Compatible with John Deere Hay Cutting(s) 3830< li>
  • Replaces John Deere OEM number R97876, R70736< li>
  • O-Ring not included < li>
  • For O-Ring use Item #: 161812< li> < UL> (Part No: 126941)
$8.06
Evaporator - For 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 with SN# above 075971, 8440, 8450, 8630 with SN# above 075978, 8640, 8650, 8850. Evaporator 29" Long, 5" Wide. REPLACES RE52265 (Part No: 165597)		$182.00
Fan - This 8 blade fan is 19 inches in diameter. For tractor models 2840, 2350, 2550, 2750. (Part No: 155452)		$58.00
Fan - This Plastic fan has a metal hub. The outside diameter is 14.125 inches (358.77mm). It is used on Compact Tractor Models: 1070, 3032E, 3036E, 3038E, 4005, 955, 970 and 990. Also used on 1420 Riding Mower, 1435 Riding Mower, 1445 Riding Mower, 1545 Riding Mower, 1550 Riding Mower, 1565 Riding Mower, 1570 Riding Mower, 1575 Riding Mower, 1580 Riding Mower, 1585 Riding Mower, 3510 Cane Harvester, 3520 Cane Harvester, 3522 Cane Harvester, 997 ZTrak Mower, CH570 Cane Harvester, CH670 Cane Harvester, Z997R Riding Mower. Replaces OEM number M805013 (Part No: 182784)		$41.20
Fan, 4 Blade - Fan is 16.00" diameter with 1-1 2" pilot hole, mounting holes on 1-3 4" centers. For tractor models 1020, 1520, 2040, 2240, 820, 830, JD300, JD350, JD350B. (Part No: 108498)		$54.00
Fan, 6 Blade - 14" diameter, 1.00" pilot hole, mounting holes 1-1 4" center to center. For tractor models 420, 430. (Part No: 163824)		$108.00
Fan, 6 Blade - 16-1 2" diameter, 1-1 2" pilot hole, mounting holes on 1-3 4" centers. For tractor models 2020, 2040, 2150, 2155, 2240, 2255, 2440, JD400, JD401, (JD440, JD440A, JD440B all SN# up to 49999), JD480. (Part No: 155554)		$67.20
Fan, 8 Blade - New 8 blade fan has a 24 inch diameter, 1.5 inch pilot hole, and mounting holes on 2 inch center. Used on John Deere 693B industrial, 440C Skidder, 440D Skidder, 448D Skidder, 540B Skidder, 540D Skidder, 548D Skidder, 4240, 4350, 4430, 4440, 4630 (Part No: 140625)		$140.00
Fan Assembly - For M, MI, MT. Fan Assembly. (0913R) (Part No: 100770)$77.00
Fan Assembly - This 4 blade fan assembly is for tractor models M, MI, and MT. Includes fan, pulleys, sealed bearing and bolt. Replaces AM839T. (Part No: 100770)		$77.00
Fan Belt - Drive belt for Generator and water pump. For tractor models A, AO, AR, 60 up to SN# 29999, 70 up to SN# 8099. (Part No: 183868)		$26.76
Fan Belt - Drive belt for fan, generator and water pump. For gas: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26606R. (Part No: 114000)		$7.70
Fan Belt - Drive belt for fan, generator and water pump. For dsl: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26607T. For 3010, 3020, 4010, 4020 (Part No: 123151)		$13.00
Fan Belt - For model 850 up to SN# 007760. (Part No: 184590)$14.46
Fan Belt - For model 850 SN# 007761 and up. (Part No: 127017)$20.00
Fan Belt - For model 950 up to SN# 010859. (Part No: 179468)$8.76
Fan Belt - For model 950 SN# 010860 and up. (Part No: 152137)$7.70
Fan Belt - For tractor models 855, 856. (Part No: 182554)$7.26
Fan Belt - For tractor models 770, 870, 970, 1070. Replaces M802627. (Part No: 123739)$3.50
Fan Belt - For model M. 3 4" X 34.53" (sub. for AM631T) (Part No: 114500)$22.00
Fan Belt - This Fan Belt measures 0.453 inches wide X 48.57 inches circumference Polyester Cord Cogged. Replaces T626T, 157538AA, 527621R1, 71146702, 1146702, 13481, 257480, 308484, 619485, 7480 Please verify measurements before ordering (Part No: 115935)$6.20
Fan Belt, Set of 2 - Measuring 1 2 X 66.3 inches, this is a set of two Double Cog Polyester Cord belts. Replaces John Deere part numbers RE29018, AR74662. Used on John Deere Models: 4050 with 6466 engine, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8430 Model Year 1974-1981, 8440 (Part No: 114015)		$15.00
Fan Blade - Several John Deere Compact tractors uses this six blade fan, including: 1070, 3005, 655, 670, 755, 756, 770, 790, 855, 856, 870, 970. This fan measures 13 1 2 inch diameter, 15 16 inch pilot hole, .3125 inch mounting holes 1.10 inch bolt circle. (Part No: 140578)		$27.00
Fan Blade - 4 -
  • For John Deere tractor models 720, 730< li>
  • Replaces John Deere OEM number AF1119R, AF825R< li>
  • 18-1 2" Diameter< li>
  • 1" Pilot Hole< li> < UL> (Part No: 163810)
$104.00
Fan Blade - 5 -
  • For John Deere tractor models 2030 (Gas), 3010 (Without AC)< li>
  • Replaces John Deere OEM number AR34450< li>
  • 18" Diameter< li>
  • 1-1 2" Pilot Hole< li>
  • 4 Mounting Holes with 2.500" BHC and 4 mounting hole with 2.875" BHC< li> < UL> (Part No: 163820)
$153.00
Fan Blade, 5 Blade - 21" diameter, 1.5" pilot hole, 8 mounting holes on 1" centers. For tractor models 4000, 4010, 4020, (4230 without ac). (Part No: 121441)		$134.00
Fan Blade - 6 -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number AR38790< li>
  • 16" Diameter< li>
  • 1-1 2" Pilot Hole< li>
  • Mounting Holes on 1-3 4" Centers< li> < UL> (Part No: 163825)
$90.22
Fan Blade - 6 -
  • For John Deere tractor models 4320, 4520, 4620, 7020< li>
  • Replaces John Deere OEM number AR48871< li>
  • 23" Diameter< li>
  • 1-1 2" Pilot Hole< li>
  • Mounting Holes on 2" Centers< li> < UL> (Part No: 163826)
$105.80
Fan Blade - 6 -
  • For John Deere tractor models 4430, 4630< li>
  • Replaces John Deere OEM number AR60401< li>
  • 24" Diameter< li>
  • 1-1 2" Pilot Hole< li>
  • Mounting Holes On 2" Centers< li> < UL> (Part No: 163827)
$174.30
Fan Blade - 7 -
  • For John Deere tractor models 5410, 5420, 5500, 5500N, 5510, 5520< li>
  • Replaces John Deere OEM number RE62634< li>
  • 19" Diameter< li>
  • 1-1 2" Pilot Hole< li>
  • Mounting Holes on 1-3 4" Centers< li> < UL> (Part No: 163851)
$72.50
Fan Blade - 8 -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR85893< li>
  • 26" Diameter< li>
  • 2" Pilot Hole< li>
  • Mounting Holes On 1-3 4" Centers< li> < UL> (Part No: 163854)
$158.00
Fan Blade - 8 -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455< li>
  • Replaces John Deere OEM number AR94950< li>
  • 24-1 2" Diameter< li>
  • 5" Pilot Hole< li>
  • Mounting Holes On 3" Centers< li> < UL> (Part No: 163855)
$117.00
Fan Drive Disc - For tractor models A, (B SN# 171992 and up), (G SN# 13910 and up), (H SN# 50500 and up), 50, 520, 530, 60, 630, 70, 720, 730. Also replaces B2123R. Measures 3.627 inches O.D., .747 inch Spline diameter, 10 splines, .989 inches thick. 2 Used per tractor, price is each. (Part No: 112427)		$42.80
Fan Friction Washer -
  • For John Deere tractor models ANH, AO (s n 264644-later), AO, AR (s n 264644-later), AW, B, BN, BNH, BO (s n 334150-later), BR (s n 334150-later), BWH, D (s n 30400-later), G (s n 13910-later), GH (s n 13910-later), GM (s n 13910-later), GN (s n 13910-later), GW (s n 13910-later), H (a n 50499-earlier when converted to friction style fan drive), HNH (a n 50499-earlier when converted to friction style fan drive), HWH (a n 50499-earlier when converted to friction style fan drive), 50, 60, 70, 520, 530, 620, 630, 720, 730 (gas diesel LP)< li>
  • Replaces John Deere OEM number D399R, R105808< li>
  • 3-1 2" O.D.< li>
  • 1-1 8" I.D.< li>
  • 1.100" thick< li> < UL> (Part No: 115008)
$5.36
Fan / Generator Belt - This Fan Belt measures 45.57 inches length and 0.453 inch width wedge belt. Direct replacement to A4897, A4897R, TX10276, 102752A, 303045080. Used on John Deere 60 series (s n 30000 & up), 70 series (s n 8100 & up), 70 dsl, 620, 630, 720, 730.. Please verify measurements before ordering Verify correct spark plug size and type (Part No: 168335)		$9.16
Fan Shaft Bearing - This Fan Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Part No: 172930)		$36.00
Fan Shroud - For model A after SN# 487999, 60, 620, 630, all Rowcrop, Standard and Orchard. (Part No: 115522)		$78.50
Fan Shroud -
  • For John Deere tractor model 4430< li>
  • Replaces John Deere OEM number AR60016< li>
  • Verify Fan diameter for fit.< li>
  • Shroud Opening: 24" x 25"< li>
  • For 6 Blade Fan use Item #: 140625< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 127198)
$157.00
Fan Shroud -
  • For John Deere tractor model 4440< li>
  • Replaces John Deere OEM number AR96559, AR80655< li> < UL> (Part No: 146697)
$161.00
Fan Shroud -
  • For John Deere tractor model 4630< li>
  • Replaces John Deere OEM number AR60017< li> < UL> (Part No: 160868)
$172.00
Gasket -
  • For John Deere tractor models 80, 820, 830 (all Diesel)< li>
  • Replaces John Deere OEM number R1524R< li> < UL> (Part No: 160360)
$3.56
Gasket - Thermostat Cover, T24932 -
  • For John Deere tractor models 3120, 3130< li>
  • Compatible with John Deere Combine(s) 955 (s n 235169-earlier), 4400, 4420, 6600< li>
  • Compatible with John Deere Harvester(s) 484< li>
  • Compatible with John Deere Construction & industrial models 540, 540A, 544, 544A, 570, 570A< li>
  • Replaces John Deere OEM number T24932< li> < UL> (Part No: 155337)
$2.30
Gasket - Thermostat, R54638, R501373 -
  • For John Deere tractor models 2030, 2440, 2520, 2630, 2640, 2940, 3030, 3130, 4030, 4050< li>
  • Compatible with John Deere Combine(s) 1170, 4420, 9400, 9410, 9450< li>
  • Replaces John Deere OEM number R54638, R501373< li> < UL> (Part No: 155333)
$2.06
Gasket, Water Pump to Back Plate - For tractor models 650, 750. Price shown is for each, sold only in multiples of 3 items. (Part No: 146683)		$1.51
Gasket, Water Pump to Back Plate - For tractor models 850, 950, 1050. Sold each. (Part No: 146684)		$1.59
Gasket - Water Pump to Tank -
  • For John Deere tractor models B (s n B306600-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2887R< li> < UL> (Part No: 160355)
$4.06
Heater Hose -1/2" -
  • For John Deere tractor models 3100, 3200, 3300, 3400< li>
  • High strength polyester yarn - 2 ply< li>
  • Length: 32.9"< li>
  • I.D.: 1 2"< li>
  • O.D.: 25 32"< li>
  • Temperature Range: 31° to 212° F< li>
  • California P65 warning< li> < UL> (Part No: 177087)
$48.00
Hose Kit -
  • For John Deere tractor model 4030< li>
  • For late model tractors without service valve< li> < UL> (Part No: 167366)
$305.00
Hose Support -
  • For John Deere tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces manufacturer number SHF463< li> < UL> (Part No: 165473)
$13.14
Lower Radiator Bracket -
  • For John Deere tractor models M, MC, MT, 40, 320, 330, 420, 430< li>
  • Replaces John Deere OEM number AM298T< li>
  • This bracket does NOT include the rubber mounting pad< li> < UL> (Part No: 126573)
$29.26
Lower Water Pipe - For B up to SN# 42199. 19 inches long. (Part No: 179089)$49.72
Lower Water Pipe - For tractor models BO, BR, H from SN# 1000-26999. Lower Water Pipe. (Part No: 179107)		$43.00
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3 8 inches (11cm) length, 2-1 2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: 178758)		$95.00
Manifold Water Hose -
  • For John Deere tractor models 4240, 4440, 4640, 4840, 6030, 7520, 8430, 8440, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number TY22404< li>
  • 1" Diameter< li>
  • 12-1 4" Long< li> < UL> (Part No: 109965)
$5.90
Oil Cooler Bypass Tube - This Oil Cooler Bypass Tube measures 10.69 inches long, 1.125 inside diameter and 1.250 outside diameter. For models 4040 early, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5200, 5400, 7020, 8430, 8440, 8450, 8560. Verify measurements to ensure you are ordering the correct tube. (Part No: 158770)$42.50
Oil Cooler Condenser - Combination Condenser and Oil Cooler measures 20 1 2 inches wide and 22 inches high. Used on John Deere 4240, 4440, 4640 (Part No: 110198)		$441.01
Over Flow Tank, with Cap - For tractor models 850, 950, 1050. (Part No: 181905)$20.00
Pulley, Water Pump - 1 2" wide, used on pumps AB262R, AA5570R. For tractor models (50 SN# up to 5016058), (60 SN# up to 6029999), (A SN# 700200 and up), (AO, AR SN# 281400 and up), (B SN# B306600 and up). (Part No: 172278)		$36.00
Pulley, Water Pump - 3 8" wide, used with AB4951R, AA6327R water pumps. For tractor models (50 SN# 5016058 and up), 520, 530, (60 SN# 6030000 and up), 620, 630. (Part No: 172355)		$72.70
Radiator - We do NOT have radiators for John Deere 1010. We get alot of calls for this item but we do not know of anyone who makes one. Contact your local radiator shop or your John Deere dealer for this item. (Part No: Radiator)$0.00
Radiator - Core size 15.00" wide x 16.75" high. For tractor models 970, 1070. (Part No: 107935)		$561.30
Radiator - For (1640, 1840, 2040 ALL SN<429999)(1641, 1641f, 2040s, 2140, 2141, 2350, 2541, 2550, 2750, 2941). Radiator. Core Dimensions: 20.625" high, 18.875 high, 4 rows of tubes, 8 fins per inch. Replaces AL31237, AL37568 (Part No: 101748)		$398.00
Radiator - For 2250, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N ALL SN<669788. Radiator. Core Dim: 24.125" high, 18.875 wide, 4 rows of tubes (dense), 8 fins per inch. (Part No: 101751)		$485.00
Radiator - For 2955 S Cab SN<664559, 2955 with O Cab SN<660812, (3050, 3350). Radiator. Core Dim: 24.125 high, 18.875" wide, 4 rows of tubes (dense), 8 fins per inch. (Part No: 101752)		$561.70
Radiator - For tractor models (4475, 5575, 5575 ALL Skidloader with Diesel Engine). Radiator. Core Dim: 18.0" wide, 18.375" high, 4 rows of tubes, 7 fins per inch. (Part No: 117544)		$395.00
Radiator - For model 675 Skidloader with Diesel Engine. Radiator. Core Dim: 18.00" wide, 17.75" high, 3 rows of tubes, 8 fins per inch. (Part No: 117542)		$312.90
Radiator - This new radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each radiator has a stamped brass tank, undergoes a rigorous quality inspection, and is 100% leak tested. This radiator has a serpentine fin construction with 3 rows of tubes. It is 17.375" tall and the core size is 15" wide. This radiator fits the John Deere Compact Tractor 1050. Replaces CH13963. (Part No: 152356)$510.00
Radiator - This radiator has 8 fins per inch and 5 rows of tubes. It is 30.125" tall and the core size is 15" wide. This radiator fits multiple John Deere Tractor models. For tractor models: 8100(SN <00999), 8200 (SN <00999), 8300 (SN <00999 or 025860>), 8310, 8310, 8310T, 8400, 8400T, 8410, 8410T. Replaces RE61305, RE69136. (Part No: 119641)$870.00
Radiator - For tractor models: 6515, 6520, 6615, 6620, 6715, 6820, 6920, 6920S, SE6520, SE6620, SE6920, 7220, 7320, 7420, 7520, 7425, 7525. Overall Height: 27 1 8 Inches, Overall Width: 221 2 Inches, Core Height: 221 2 Inches, Core Width 21 3 8 Inches, Depth 5 1 4 Inches, Fins Per Inch: 13 Comes with upper tank. Replaces original part numbers: AL176362, AL169733, AL160274, AL164554. (Part No: 126961)		$1400.00
Radiator - Radiator - Plastic Tank Aluminum Construction for models: 325, 328, CT322 COMPACT TRACK LOADER, CT332 COMPACT TRACK LOADER. Replaces OEM number KV23226. (Part No: 123489)$590.00
Radiator - This radiator has a serpentine fin construction with 3 rows of tubes. It is 17.0625" tall and the core size is 15.375" wide. This radiator fits the John Deere Compact Tractor 950 Serial Number 010860 and up. Replaces CH19296 (Part No: 119627)		$390.00
Radiator - This radiator fits the following tractor models: 6020, 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420, 6420L, 6420S, 6425, 6520L, SE6020, SE6120, SE6220, SE6320, and SE6420. The core measures 19 7 8 inches high, 21 3 8 inches wide, and 5 1 4 inches deep. Replaces part numbers: AL176361, AL169733, AL160274, AL164554, and AL171542. (Part No: 152334)		$1550.00
Radiator - John Deere Tractor Radiator Core 32 5 8 inches high x 15 3 4 inches wide x 3 1 4 inches thick. All Aluminum Construction. Used on John Deere 8120, 8120T, 8220, 8220T, 8320, 8320T. Replaces RE186715, RE245228 (Part No: 163934)		$1025.00
Radiator - Used on Yanmar built John Deere models 850, 900HC and 950, this new radiator comes with a cap. It is 19 1 8 inches high and 15 3 8 wide. Replaces OEM numbers 12250-44501, 122250-44501, CH19293, CH12622, CH14024 (Part No: 124399)		$277.95
Radiator - For 1520 with hi-lo shift or reverser, 2020, 2030, 2630, 2440 to SN# 340999, 2640 to SN# 340999; industrial 300B. For Tractors with a radiator assembly that has a remote oil cooler. Oil Cooler not included. Core Size: 13.625" Wide, 20.0" High. 4 Rows of Tubes, 8 Fins per Inch. Replaces AT28810, AT20847, AR65715 (Part No: 101754)		$240.00
Radiator - For tractor models 2440 SN# 341000 and up, 2640 SN# 341000 and up. Radiator assembly. (Part No: 101755)		$244.20
Radiator - For tractor models M, MT, 320, 330, 40. Radiator. Core size (the fin part): 14.375" wide, 17.000" high, 3 row of tubes, 7 fins per inch. (Part No: 101890)		$387.00
Radiator - For 210C, 482C. Radiator, complete. CORE SIZE: 17.625" HIGH, 23.500" WIDE. (Part No: 119622)		$596.00
Radiator - For 300B, 301A, 302A, 401, 401B, 401C, 480A, 480B, 1520 all without Hi-Lo Shift or Reverser. Radiator WITHOUT OIL COOLER. Core is 20.062" High, 18.5" Wide. Also replaces AT28583. (Part No: 101739)		$420.00
Radiator - For 300D, 310C, 310D, 315D. Radiator, complete. Replaces AT156560, AT129142, AT100446. Core size of 21.125" Wide, 23.25" High. (Part No: 101740)		$545.90
Radiator - For John Deere 300 without Reverser, (301, 1020 both without Reverser or Hi-Lo Shift), (1120, 820, 920 all with serial number up to 75429). Radiator, complete. Core size: 17.062 inches High, 18.5 inches Wide. (Part No: 101871)		$379.50
Radiator -
  • For John Deere tractor model 4050 (s n 005510-earlier)< li>
  • Replaces John Deere OEM number RE16733, RE16728< li>
  • Overall Height: 35" < li>
  • Overall Width: 22-5 8"< li>
  • Core Height: 27-1 8"< li>
  • Core Width: 21-3 4"< li>
  • Depth: 3-1 2"< li>
  • Rows: 6< li>
  • Fins Per Inch: 6< li>
  • Fill Neck Height: 1"< li>
  • Inlet: 2"< li>
  • Outlet: 2-1 2"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 101763)
$1075.00
Radiator -
  • For John Deere Construction & industrial models 310, 315< li>
  • Replaces John Deere OEM number AT186930< li>
  • Core Height: 28"< li>
  • Core Width: 21"< li>
  • Depth: 2"< li>
  • Rows: 3< li>
  • Fins Per Inch: 7 Flat Fin< li>
  • Inlet: 2"< li>
  • Outlet: 2"< li> < UL> (Part No: 119623)
$661.50
Radiator -
  • For John Deere tractor model 950 (s n 010859-earlier)< li>
  • Replaces John Deere OEM number CH14206< li>
  • Overall Height: 19-1 4"< li>
  • Ovearll Width: 15-3 8"< li>
  • Core Height: 15-1 4"< li>
  • Core Width: 13-5 8"< li>
  • Depth: 1-3 4"< li>
  • Rows: 3< li>
  • Fins Per Inch: 11< li>
  • Fill Neck Height: 3 4"< li>
  • Inlet: 1-1 8"< li>
  • Outlet: 1-1 8"< li> < UL> (Part No: 119626)
$500.00
Radiator -
  • For John Deere tractor model 8450< li>
  • Replaces John Deere OEM number RE21557, 031083, 1A11243, AR93889, WURE21557< li>
  • Overall Height: 43-1 4"< li>
  • Overall Width: 28-1 2"< li>
  • Core Height: 34-1 2"< li>
  • Core Width: 26-7 8"< li>
  • Rows: 5< li>
  • Fins Per Inch: 8< li>
  • Fill Neck Height: 1"< li>
  • Inlet: 2-1 4"< li>
  • Outlet: 2-3 4"< li> < UL> (Part No: 119644)
$1500.00
Radiator -
  • For John Deere tractor models 5210 (with cab), 5220 (with cab), 5310 (with cab), 5310N (with cab), 5320 (with cab)< li>
  • Replaces John Deere OEM number RE70673, AR5555< li>
  • Core Height: 15-3 4"< li>
  • Core Width: 19"< li>
  • Depth: 2-1 2'< li>
  • Rows: 4< li>
  • Fins Per Inch: 12< li>
  • Fill Neck Height: 3 4"< li>
  • Inlet; 1-1 2"< li>
  • Outlet: 1-1 2"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 119650)
$365.00
Radiator - For tractor models 3050, 3055, 3155, 3255, 3350, 3650, 2955 without cab SN# above 660813 or with cab SN# above 664560. (Part No: 101753)		$591.32
Radiator - For 2510, 2520, 4219DF, 4276D. Radiator. There is an additional shipping cost for this product of $37.50 (Part No: 119610)		$375.00
Radiator - For model 4320. (Part No: 101768)		$580.00
Radiator - For 4030. Radiator (Part No: 101761)		$660.00
Radiator - For model 4230 without A C. (Part No: 101766)		$516.90
Radiator - For tractor models 5200, 5300, 5300N, 5400, 5400N. Radiator Replaces RE45611. Brass & Copper construction, not plastic and aluminum. Replaces RE66029, RE45611 (Part No: 101777)		$357.00
Radiator - For tractor models 5500, 5500N. (Part No: 101778)		$410.00
Radiator - For 5210, 5220, 5310, 5310N, 5320, all without cab. Radiator. (Part No: 119652)		$425.00
Radiator - For tractor models 5410, 5420, 5510, 5510N, 5520. (Part No: 119648)		$430.00
Radiator - For 6110, 6200, 6200L, 6210, 6310, 6410. Radiator also replaces part numbers AL115002 and AL110865. (Part No: 135013)		$500.00
Radiator - For tractor models 6300, 6300L, 6400, 6400L, 6500L. (Part No: 101780)		$528.20
Radiator - For tractor models 7200, 7210, both without cab. (Part No: 119642)		$580.00
Radiator - For tractor models 7410, 7510, (7200, 7210, 7400, all with cab). Radiator replaces RE49167. This radiator is Brass and Copper Construction to Replace JD Plastic and Aluminum Core Design. (Part No: 173846)		$561.00
Radiator - For 310, 310A, 310B, 401D. Radiator (Part No: 101741)		$500.00
Radiator - For model 401D. (Part No: 119625)		$488.30
Radiator - For model 410. Core Size: 13.625" Wide, 21.500" High. 4 Rows of Tubes, 8 Fins per Inch. Replaces AT32589. (Part No: 101743)		$475.00
Radiator - For tractor models 420 and 430 with Heavy Duty Protective Equipment. (Part No: 101744)		$490.00
Radiator - For model 430. (Part No: 101745)		$445.50
Radiator - For tractor models 500C, 510. (Part No: 119624)		$570.00
Radiator - For tractor models 3375, 375 both with Diesel. (Part No: 117540)		$375.00
Radiator - For model 675B with diesel engine. (Part No: 112288)		$385.00
Radiator - For model 8875 with Diesel. (Part No: 117543)		$670.00
Radiator - For tractor models 1850, 1950, 1950N, (2155 and 2355N, both with SN# above 622000). Replaces AL67563, AL59532 (Part No: 101749)		$440.50
Radiator - For tractor models 2250, 2450, 2650, 2650N, 2850, (2355, 2555, 2755, 2855N, all with SN# 669789 and up). (Part No: 101750)		$470.00
Radiator -
  • For John Deere tractor model 2400 (s n 01022-later)< li>
  • Replaces John Deere OEM number AP33080< li>
  • Overall Height: 19-5 8"< li>
  • Core Height: 15-1 2"< li>
  • Core Width: 16-1 4"< li>
  • Inlet: 1-1 4"< li>
  • Outlet: 1-1 4"< li> < UL> (Part No: 152279)
$580.00
Radiator -
  • For John Deere Construction & industrial models 210, 310, 315, 410< li>
  • Replaces John Deere OEM number AT428806< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156387)
$539.50
Radiator -
  • For John Deere tractor models 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number RE245228< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 157363)
$1140.01
Radiator -
  • For John Deere tractor models 5085E, 5085M, 5090E, 5100E, 5100M, 5100MH, 5115M, 5115ML, 6115D< li>
  • Replaces John Deere OEM number SJ11171, SJ26166< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160229)
$810.20
Radiator -
  • For John Deere Construction & industrial model 210L< li>
  • Replaces John Deere OEM number AT434569< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160241)
$702.10
Radiator -
  • For John Deere Construction & industrial model 710< li>
  • Replaces John Deere OEM number AT370616< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160242)
$1405.20
Radiator -
  • For John Deere tractor models 6506, 6510, 6600, 6610, 6800, 6810, 6900, 6910< li>
  • Replaces John Deere OEM number AL111629, AL115003, AL115733, AL116614, AL79036< li>
  • Overall Height (Main Body) 26"< li>
  • Overall Width: 20.875"< li>
  • Thickness: 4.125"< li>
  • Core Height: 22.91"< li>
  • Core Width: 20.15"< li>
  • Core Thickness: 2.59"< li>
  • Rows: 5< li>
  • Inlet Outlet: 2.250"< li> < UL> (Part No: 161716)
$420.00
Radiator -
  • For John Deere Construction & industrial models 210K, 310K, 310SK, 315SK, 325K, 325SK, 410K< li>
  • Replaces John Deere OEM number AT369969< li>
  • Core Dimensions: 25-1 4" x 25-3 8" x 3"< li>
  • Inlet: 2-1 2"< li>
  • Outlet: 2-1 2"< li>
  • Made in the USA< li> < UL> (Part No: 164528)
$1094.30
Radiator -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560281< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165244)
$1637.80
Radiator -
  • For John Deere tractor models 855, 955< li>
  • Replaces John Deere OEM number AM108901< li> < UL> (Part No: 170160)
$1100.00
Radiator -
  • For John Deere tractor models 4240S, 4350< li>
  • Replaces John Deere OEM number AR102736< li> < UL> (Part No: 170163)
$1050.00
Radiator -
  • For John Deere tractor models 4200, 4210, 4300, 4310, 4400< li>
  • Replaces John Deere OEM number LVA12158< li> < UL> (Part No: 170165)
$385.00
Radiator -
  • For John Deere tractor models 5083E, 5093E, 5093EN, 5101E, 5101EN, 5415, 5425, 5425N, 5525, 5525N, 5603, 5615, 5625, 5715, 5725, 5725N< li>
  • Replaces John Deere OEM number RE212289< li> < UL> (Part No: 170166)
$790.00
Radiator -
  • For John Deere tractor models 4600, 4610, 4700, 4710< li>
  • Replaces John Deere OEM number AM125285< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 170167)
$294.00
Radiator -
  • For John Deere tractor models 6810, 6910, 6910S, 7405, 7500< li>
  • Replaces John Deere OEM number AL118572< li> < UL> (Part No: 170171)
$1850.00
Radiator -
  • For John Deere tractor models 9360R (s n 000101-014999), 9370R (s n 015000-later), 9410R (s n 000101-014999), 9420R (s n 015000-later), 9420RX, 9460R (s n 000101-014999), 9460RT (s n 900101-905999), 9470R (s n 015000-later), 9470RT (s n 906000-later), 9470RX, 9510R (s n 000101-014999), 9510RT (s n 900101-905999), 9520R (s n 015000-later), 9520RT (s n 906000-later), 9520RX, 9560R (s n 000101-014999), 9560RT (s n 900101-905999), 9570R (s n 015000-later), 9570RT (s n 906000-later), 9570RX< li>
  • Replaces John Deere OEM number RE343930, RE333983< li>
  • Core Length: 28-1 4"< li>
  • Core Height: 49-1 4"< li>
  • Core Thickness: 5-1 4"< li>
  • Overall Length: 28-3 8"< li>
  • Overall Height: 58"< li>
  • Overall Thickness: 9-3 4"< li>
  • Outlet Hose Size: 3-1 2"< li>
  • Inlet Hose Size: 3-1 2"< li> < UL> (Part No: 170174)
$2700.00
Radiator -
  • For John Deere Construction & industrial models 400G, 450B, 450C, 450D, 450E, 455D, 455E< li>
  • Replaces John Deere OEM number AT116777< li> < UL> (Part No: 170176)
$3950.00
Radiator -
  • For John Deere Construction & industrial models 444J, 444JR, 444K, 524K, 544J, 544K< li>
  • Replaces John Deere OEM number AT334100< li>
  • Core Length: 17-1 2"< li>
  • Core Height: 27"< li>
  • Core Thickness: 4-1 2"< li>
  • Overall Length: 18-3 4"< li>
  • Overall Height: 33"< li>
  • Outlet Hose Size: 2-1 4"< li>
  • Inlet Hose Size: 2-1 4"< li>
  • Fins Per Inch: 8< li>
  • Number of Rows: 5< li>
  • Radiator Type: Plastic Aluminum< li> < UL> (Part No: 170177)
$2750.00
Radiator -
  • For John Deere tractor models 2020, 2030< li>
  • Replaces John Deere OEM number AM131532, VGA10295< li>
  • Core Height: 16-3 4"< li>
  • Core Width: 11"< li>
  • Core Thickness: 2-5 8"< li>
  • Outlet Hose Size: 1"< li>
  • Inlet Hose Size: 1"< li>
  • Fins Per Inch: Serpentine< li>
  • Number of Rows: 4< li> < UL> (Part No: 170179)
$1175.00
Radiator -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE71796, RE73306< li>
  • Copper Core< li>
  • Overall Height: 23.7"< li>
  • Overall Width: 20.55< li>
  • Overall Thickness: 9.17"< li>
  • Inlet Outlet: 1.496"< li>
  • Neck Height: .75"< li>
  • Core Height: 14.57"< li>
  • Core Width: 19.29"< li>
  • Core Thickness: 1.77"< li>
  • Rows: 3< li>
  • Fins: 12 per inch< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 170594)
$345.00
Radiator - For tractor models 6600 with Rear Mounting Brackets, 7700 (From S#111901) with 404 Diesel, 7720, 7722, 8820 Combines (Part No: 101782)		$1095.00
Radiator - For tractor models 6600 (1978 Only), 6620 Combines. (Part No: 101781)		$925.00
Radiator - For tractor models 6600 (To S#105800), 7700 (To S#111900) Combines with 329 Gas or Diesel Engine. (Part No: 101783)		$1425.00
Radiator - With 5 Row Core For 9400 (S#640101-#655316), 9410, 9450, 9500 (S#645201-#656269), 9510, 9550, 9600 (To S#640300) with 253 Engine, 9600 (S#640301-#656881), 9650 Combines (Part No: 101789)		$995.00
Radiator - Core (the fin part) measures 13.6 in wide x 17.2 High. For 1020 (with hi-lo shift or reverser), 1030, 1120 (serial # 75430 & up), 1530, 2040 & 2240 (serial # up to 349999), 820, 830, 920 (serial # 75430 & up), 930. This radiator uses cap part number AT29054 and is not included. (Part No: 101746)		$214.00
Radiator - For 1830, 2030, 2130. (Part No: 101754)		$240.00
Radiator - For tractor models 2840, 3030, 3120, 3130. (Part No: 101880)		$547.00
Radiator - For tractor models 2940, 2950, 3040, 3140, 3141, 3641. (Part No: 101756)		$561.10
Radiator - For tractor models 940, 1040, 1140, 2040 & 2240 (serial # 350001 up), 2150, 2255, 2155 (serial # up to 621999) (Part No: 101747)		$250.00
Radiator - For model 3010 gas and diesel (Not LP). Replaces AR26797, AR31583, AR46437 (Part No: 101757)		$355.00
Radiator - For 3020 gas or diesel. Replaces R34457, AR40831. (Part No: 101758)		$420.00
Radiator - For 4000 (serial # 201000 up), 4020 both gas or diesel. Replaces AR46434, AR49454, AR46443, 1A7221. Additional $30.00 shipping due to weight. This additional charge will be added to your order. (Part No: 101760)		$355.00
Radiator - For tractor models 4010 Gas or Diesel. Replaces AR26551, AR26569, AR31581, AR31582, AR34302. (Part No: 101759)		$345.00
Radiator - For model 4230 With Air Conditioning. Gas or diesel, HOA: 33.5 inches, WOA: 20.125 inches, ThkOA: 4 inches, Inlet Outlet Dia: 2 inches, Core H: 25.5 inches, W: 19.25 inches, Thk: 3 inches, 5 Row, 8 FPI, includes cap. (Part No: 101765)		$630.00
Radiator - Radiator for model 4430. Core measues 22 inches wide and 27 3 8 tall. Radiator replaces AR61878, AR60337. (Part No: 101769)		$540.00
Radiator - For 4630 With Air Conditioning (serial # up to 010646). Replaces AR61890. (Part No: 101774)		$956.40
Radiator - For 4630 With Air Conditioning (serial # 10647 up. (Part No: 101773)		$750.00
Radiator - Radiator for model 4040. Core measures 19 1 8 inches wide and 25 1 2 inches tall. Replaces OEM numbers AR90738, AR79450 and AR79451 (Part No: 101762)		$686.60
Radiator - For model 4240. (Part No: 101767)		$800.00
Radiator - Aluminum Core - The dimensions of this radiator are: Core Height: 17.75 inches, Core Width: 16.125 inches, Overall Height: 12.8 inches, Overall Width: 16.25 inches, Rows of tubes: 2. Used on John Deere 2305, 790, 3005, 2320, 2025R. Replaces AM881422, LVA802036 (Part No: 173073)		$589.99
Radiator - Aluminum Core -
  • For John Deere tractor models 4010, 4110, 4115< li>
  • Replaces John Deere OEM number LVA800889< li>
  • Overall Height: 15.75"< li>
  • Overall Width: 16.125"< li>
  • Core height: 11.81"< li>
  • Core Width: 15.25"< li>
  • Rows: 2< li>
  • Fill Neck Height: 1.125"< li>
  • Inlet: 1.125"< li>
  • Outlet: 1.125"< li> < UL> (Part No: 170493)
$740.00
Radiator - Aluminum Core -
  • For John Deere tractor models 990, 4005< li>
  • Replaces John Deere OEM number AM880592< li>
  • Overall height: 20.68"< li>
  • Overall Width: 16.125"< li>
  • Core Height: 16.75"< li>
  • Core Width: 15.25"< li>
  • Rows: 2< li>
  • Fill Neck Height" 1"< li>
  • Inlet: 1.125"< li>
  • Outlet: 1.125"< li> < UL> (Part No: 170501)
$780.00
Radiator Bolt Kit - For tractor models (Unstyled A SN# 410000 to 476999), (AR SN# 250000 to 271999), (AO SN# 250000 to 271999). THIS KIT INCLUDES THE CORRECT LENGTH OF HARDWARE WHEN ADDING SHUTTERS. (Part No: 115510)		$47.50
Radiator Bolt Kit - For tractor models (STYLED A, AN, AW, ANH, AWH SN# 477000 and up), (AR 272000 & up), (AO SN# 272000 & UP). (Part No: 115511)		$51.00
Radiator Brace Bracket -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560277< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165255)
$190.50
Radiator Bracket Channel -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560278< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165249)
$374.80
Radiator Bracket Channel -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560272< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165250)
$385.00
Radiator Bracket Channel -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560275< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165251)
$377.80
Radiator Bracket Plate -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560273< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165247)
$441.70
Radiator Bracket Plate -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560283< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165248)
$122.50
Radiator Cap - For tractor models L, LA, M, 40, 320, 330, 420, 430. (Part No: 108026)		$25.00
Radiator Cap - A (Styled sn 477000 - 523599 AND sn 542700 and up), [ AO, AR (sn 260000 - 262699 AND sn 264300 and up) ], B (sn 60000 - 148999 AND sn 167000 and up), D (sn 143800 and up), G (sn 13000 - 20202), R, 60 (Orchard STANDARD ONLY- sn 600001 - 6042999). This radiator cap is for an unpressurized system and includes the gasket. The ID is 4-5 16" and is 1 2" tall. The OD measures 4.500". This cap has 3 tang's, The tang width is .560" and the inside center diameter measures 3.500". Replaces: AB1621R (Part No: 109740)		$14.00
Radiator Cap - For tractor models 50 SN# 5016616 and later, 60 Regular SN# 6030927 and later, 60 Standard SN# 6043000 and later, 70, 70 Diesel, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840, 1010, 8020. Replaces AA5757R. Cap is 3 1 4 outside diameter, fitted for a 2 notch 2 1 4 inch radiator neck. (Part No: 109933)		$17.60
Radiator Cap - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2255, 2350. (Part No: 110011)		$8.06
Radiator Cap - For tractor models (50 up to SN# 5016615), (60 up to SN# 6030926), (70 up to SN# 7008449). (Part No: 122094)		$39.99
Radiator Cap - For tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630. Also replaces AR28482. (Part No: 125561)		$19.00
Radiator Cap - Used on John Deere compact tractor models: 670, 770, 790, 870, 970, 1050, 1070, this cap is 13 psi. Fits 32 mm ID. 16 mm deep neck. This part is also extensively used on lawn and garden equipment and Gators. Replaces M802715 (Part No: 179607)		$8.96
Radiator Cap - Used as a primary radiator cap for many Japanese built compact tractors, this 13 psi cap is also used for radiator overflow reservoir systems in some larger ag tractors. Fits 3 4 inch deep neck. Verify OEM numbers before ordering. Replaces 157017-2030, 2097708, 3280783M1, 3280783M1GV, A171919, A171919GV, ESL10493GV, TPCH18207GV, TP-CH18207GV, 2097708GV, 1570172030GV, 157017-2030GV, E5TH8100AA, E5TH8100AAGV, CH18207, ESL10493. Sub for CH10427 (Part No: 124400)		$5.26
Radiator Cap -
  • For John Deere tractor model H< li>
  • Replaces John Deere OEM number AH539R< li>
  • 3 1 2" O.D.< li>
  • 7 8" Tall< li> < UL> (Part No: 110907)
$20.95
Radiator Cap -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5210, 5215, 5215F, 5215V, 5220, 5303, 5310, 5310N, 5315, 5315F, 5315V, 5320, 5320N, 5403, 5410, 5415, 5420, 5420N, 5510, 5510N, 5515, 5515F, 5515V, 5520, 5520N, 5605, 5615, 5705, 5715< li>
  • Replaces John Deere OEM number RE71863< li>
  • PSI: 12.038< li> < UL> (Part No: 161817)
$7.46
Radiator Cap -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4440, 4450, 4455, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE24897, RE39103< li>
  • Black Outer Plastic Cover< li>
  • Inside Diameter: 2.268"< li>
  • Tab to Tab: 2.026"< li>
  • Outside Diameter Cover: 4.385"< li>
  • 10 PSI< li> < UL> (Part No: 165261)
$11.40
Radiator Cap - 15 PS, Long Reach -
  • For John Deere tractor models 4040 (s n 006853-earlier), 4040S, 4050 (s n 006758-earlier), 4240 (s n 016194-earlier), 4240S, 4250 (s n 011743-earlier), 4350, 4440 (s n 006853-earlier), 4450 (s n 023186-earlier), 4640 (s n 015956-earlier), 4650 (s n 324214-earlier), 4840 (s n 008634-earlier), 4850 (s n 322745-earlier), 8440, 8640, 8650 (s n 00801-earlier), 8850< li>
  • Replaces John Deere OEM number AR76619< li>
  • 15 PSI, long reach, narrow lug< li> < UL> (Part No: 126944)
$11.40
Radiator Cap 7 PSI Short Reach -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE49908< li>
  • 1 use Item #: 118673< li> < UL> (Part No: 126942)
$5.76
Radiator Core - Core size: Height 17-3 4, width 14-1 2, depth 2-1 8. For tractor models B, 50, 520 Replaces OEM# AB3599R, AB4666R (Part No: 101894)$250.00
Radiator Core -
  • For John Deere tractor model A< li>
  • Core Only< li>
  • Core Height: 18-1 2"< li>
  • Core Width: 16-1 2"< li>
  • Depth: 2-13 16"< li>
  • Top Header: 5-1-2" x 18-3 8"< li>
  • Bottom Header: 5-1 2" x 18-3 8"< li>
  • Rows: 4< li>
  • Fins Per Inch: 6< li>
  • 22 Bolts per Header Plate< li>
  • Top & Bottom Header Centered< li> < UL> (Part No: 119666)
$415.00
Radiator Core -
  • For John Deere tractor models 80, 820, 830< li>
  • Core Only< li>
  • Core Height: 21-1 2"< li>
  • Core Width: 19-1 2"< li>
  • Depth: 2-13 16"< li>
  • Top Header: 5-9 16" x 21-1 2"< li>
  • Bottom Header: 5-9 16" x 21-1 2"< li>
  • Rows: 4< li>
  • Fins Per Inch: 7< li>
  • 20 Bolt Holes per Header Plate< li>
  • Top & Bottom Header Centered< li> < UL> (Part No: 119667)
$470.00
Radiator Core - For GP from SN# 200111 to 226401. Radiator Core. 17 1 2" H x 18 1 2" W x 2 13 16 D. Gaskets available as GK2424. (Part No: 101891)		$324.40
Radiator Core - For GP after SN# 226402. 18 3 4" H x 18 1 2" W x 2 13 16 D. Gaskets not available.(3735R). (Part No: AC1120R)		$288.05
Radiator Core - For Unstyled A 410000 to SN# 476999, Unstyled AO & AR 410000 to SN# 476999. 18 1 2 inches High x 18 5 16 inches Wide X 5 1 2 inches thick. Gasket Set is available separately as part number A432R. (Part No: 101892)		$275.00
Radiator Core - For A with SN# 477000 to 487999. Radiator Core 20" H x 17" W x 2 13 16" D. Order R2174G Gasket Set, if needed. (Part No: 119662)		$430.00
Radiator Core - For Unstyled B up to SN# 59999. Radiator Core 16 1 2" H x 14 1 2" W x 2 1 8" D. Includes R2649G Gasket Set. (Part No: 113557)		$255.00
Radiator Core - For Unstyled D up to SN# 143799 with Big Header. Radiator Core 19 3 4" H x 20" W x 2 13 16" D (2653R). Gasket set R2653G available. (Part No: 178993)$405.00
Radiator Core - For tractor models D after SN# 143799, R. Radiator Core 19 3 4" H x 20" W x 2 13 16" D. Gasket set is available as separately as part number R2651G. (Part No: 178994)$440.00
Radiator Core - For Unstyled G up to SN# 4250. (2650R) 19 1 2" H x 17" W x 2 13 16" D. No gaskets available. (Part No: 180710)$345.00
Radiator Core - For Unstyled G with SN# 4250 to 12999. Radiator Core 21 1 2" H x 19" W x 2 13 16" D. (2654R) Gasket set R2654G Available. (Part No: 119663)		$485.00
Radiator Core - This radiator core is for tractor models G (with water pump after SN# 60700), 70, 720, 730 ALL with gas engines. Radiator Core 21 1 2" H, 19 inch core width and 2 1 8 inch depth. Gasket set available as part R2180G. (Part No: 101896)		$340.00
Radiator Core - For H. Radiator Core 15 5 8" H x 14" W x 2 1 8 D. Gasket Set available as P N R2655G. (Part No: 119664)$395.00
Radiator Core - This radiator Core comes with 2 mounting gaskets and is for a Styled B with SN# above 60000. Core width is 14.75 inches, flange width is about 16 inches, and is 17.75 inches tall. Gasket set available as part #B1507R. (Part No: 101894)		$250.00
Radiator Core - Radiator Core - Styled A (serial number 488000 and up), AO (serial number 260000 and up), AR (serial number 260000 and up), 60. Order A2153R Gaskets if needed. Replaces: AA2235R, AA5582R (Part No: 101893)		$295.00
Radiator Core - This radiator measures 21 1 2 inches core height, 21 1 2 plate width and 3 inch core depth. Fits G series after serial number G13000 Styled. (Part No: 101895)		$263.60
Radiator Core - Radiator Core - 50, 520, 530. Gasket set available as R2177G (Part No: 101894)		$250.00
Radiator Core - Radiator Core - 60, 620, 630. Does not come with gasket. Note in comments section of order form (Radiator Gasket Set is R2174G) if required. (Part No: 101893)		$295.00
Radiator Core Bolt Kit - For model B sn 60000 to 305999 without a waterpump, can also be used on SN# 306600 & up, but will have some extra pieces. (Part No: 115509)		$49.00
Radiator Core Bolt Kit -
  • For John Deere tractor models 50, 60< li>
  • May have unused hardware (depending on model)< li> < UL> (Part No: 115514)
$76.00
Radiator Core Bolt Kit -
  • For John Deere tractor models 520, 530, 620 (Orchard), 630< li>
  • May have unused hardware (depending on model)< li> < UL> (Part No: 115515)
$52.00
Radiator Core - Diesel - This radiator core is made of copper fins and a brass lockseam tube. The radiator core is 21.5 inches tall, 19 inches wide, 2 inches thick, and has a plate width of 5.562". This radiator core fits John Deere Tractor models 70, 720, 730, 80, 820, 830 all with Diesel engines. Does not come with gaskets. Radiator Gasket available as part number F661R. (Part No: 101897)$273.30
Radiator Core Gasket - This Gasket set is used on John Deere B Unstyled To serial number 59999. Includes two gaskets. Used with AB354R radiator core. Replaces original part number B397R. (Part No: 113556)		$12.76
Radiator Core Gasket -
  • For John Deere tractor models B (1939-53), 50, 520, 530< li>
  • Replaces John Deere OEM number B1507R< li>
  • 5-5 8" x 16"< li>
  • Bolt Holes: 18< li>
  • Material: Cork< li>
  • Sold as a pair< li>
  • Radiator Core Gasket - Paper use Item #: 112088< li> < UL> (Part No: 118495)
$17.95
Radiator Core Gaskets -
  • For John Deere tractor models B (1939-53), 50, 520, 530< li>
  • Replaces John Deere OEM number B1507R< li>
  • 5-1 2" x 16"< li>
  • 18 Bolt Holes< li>
  • Material: Paper< li>
  • Sold as set of 2 < li>
  • Radiator Core Gasket - Cork use Item #: 118495< li> < UL> (Part No: 112088)
$17.26
Radiator Core Gaskets - Cork -
  • For John Deere tractor models A (s n 488000-later), 60, 620, 630< li>
  • Replaces John Deere OEM number A2153R< li>
  • 5-1 2" x 18-1 2"< li>
  • Bolt Holes: 20< li>
  • Material: Cork< li>
  • Sold as a pair< li>
  • Radiator Core Gasket - Paper use Item #: 111905< li> < UL> (Part No: 118496)
$23.90
Radiator Core Gasket Set - This Gasket set is used with AD1946R Radiator Core. (Part No: 189979)$12.01
Radiator Curtain - For model B from SN# 1000-34951, Radiator Curtain. (Part No: 179104)		$61.00
Radiator Curtain - For H. Radiator Curtain. (Part No: 180632)		$61.00
Radiator Cushion Foam Kit -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4240S (6-466T Diesel), 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Compatible with John Deere Combine(s) 6600 (6-404 Diesel), 6622 (6-466T Diesel)< li>
  • Replaces manufacturer number CR91035< li>
  • Includes: 17 Pieces< li> < UL> (Part No: 176899)
$45.00
Radiator - Diesel Engine -
  • For John Deere tractor model 4010 (Diesel)< li>
  • Replaces John Deere OEM number AR26551, AR26569, AR31581, AR31582, AR34302, AR46438< li>
  • Overall Height: 31-1 2"< li>
  • Overall Width: 20-3 8"< li>
  • Core Height: 24-1 2"< li>
  • Core Width: 19-1 2"< li>
  • Depth: 2"< li>
  • Rows: 3< li>
  • Fins Per Inch: 10< li>
  • Fill Neck Height: 1"< li>
  • Inlet: 2"< li>
  • Outlet: 1-7 8"< li> < UL> (Part No: 152265)
$560.00
Radiator Filler Flange - For model B from SN# 201000 and up. Uses radiator cap part number AB1621R. (Part No: 118632)		$25.99
Radiator Filler Neck - This radiator filler neck fits 50 (sn 5016616 and up), 520, 60 (Standard sn 6043000 and up), 60 (sn 6030927 and up), 620, [ 70, 720 (Diesel) ], 70 (sn 7008450 and up), 720, 80, 820 2 cylinder, 830 2 cylinder; Replaces: AA5756R (Part No: 179592)		$119.00
Radiator Filler Neck - This brass radiator filler neck is used on 530, 630, 730 (Diesel), 730. Replaces: AR20515R (Part No: 179555)		$62.00
Radiator Filler Neck - For A, AO, AR, B, G Styled. Fits: (A Styled serial number 477000 - 523599 AND serial number 542700 and up), (B serial number 60000 - 148499 AND serial number 167000 - 200999), (G serial number 13000 - 20202). Replaces: AB1607R Radiator Filler Neck. Uses cap AB1621R. This is for narrow neck, 4-1 4 inch outside diameter and 2-5 16 inch where is slides into the tank. (Part No: 110046)		$23.00
Radiator Gasket Pair - Price is for 2 radiator core gaskets for models G, 70, 720, 730, 80, 820, 830. (Part No: 122463)$27.50
Radiator Gaskets - These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Part No: 111905)		$23.90
Radiator Gaskets -
  • For John Deere tractor models G (Styled s n 13000 - later), 70, 80, 720, 730, 820, 830< li>
  • Replaces John Deere OEM number F661R< li>
  • 5-1 2" x 21-1 2"< li>
  • 21 Bolt Holes< li>
  • Material: Paper< li>
  • Sold as set of 2 < li> < UL> (Part No: 115348)
$16.76
Radiator Gasket Set - For tractor models (A unstyled up to SN# 476999 heavy duty), (AO unstyled heavy duty), (AR unstyled up to SN# 259999 heavy duty). (Part No: 179492)$13.26
Radiator Gaskets, Pre-Punched - Pre-punched gaskets for John Deere Core AC1109R. For GP from SN# 200111 to 226401. (Part No: GK2424)$35.99
Radiator Gaskets, Set of 2 - These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Part No: 111905)		$23.90
Radiator Hose - Hose, radiator lower for tractors: 6200, 6300, 6400, 6500 SN# 156053 and up. For 40, M, MI, MT. (Part No: 159688)		$35.50
Radiator Hose - Hose, radiator lower for tractors: 2355, 2555, 2755, 2855N to SN# 669788. For 40, M, MI, MT (Part No: 150837)		$13.39
Radiator Hose - Hose, radiator lower for tractors: 2955 to SN# 660812 without sound guard body~ SN# 664559 with sound guard body, 3155 to SN# 664559 with sound guard body. For tractor models 40, M, MI, MT. (Part No: 150847)		$24.26
Radiator Hose - For model (1350 SN# 622000 and up), (1550, 1750, 1850, 2155 SN# 622000 to 719999). (Part No: 122107)		$15.76
Radiator Hose - Hose, radiator lower for tractor: 2155 SN# 622000-719999. For model 2155. (Part No: 122108)		$17.76
Radiator Hose - Hose, radiator lower for tractors: 2955 to SN# 660813 and up without sound guard body~ SN# 664560 and up with sound guard body, 3055, 3155 SN# 664560 and up, 3255. For 2355, 2555, 2755, 2855N (Part No: 150846)		$24.26
Radiator Hose - For tractor models 4555, 4650, 4755, 4850, 4955. (Part No: 150787)		$11.56
Radiator Hose - For tractor models 5200, 5300, 5400, 5400N, 5500, 5500N. (Part No: 150813)		$7.90
Radiator Hose - Bulk, 10'x1" -
  • For John Deere tractor models 7520, 8440, 8560, 8570, 8640, 8760, 8770, 8870, 8960< li>
  • Compatible with John Deere Harvester(s) 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Construction & industrial models 760, 762, 844, 862, 890< li>
  • Replaces John Deere OEM number R32644, R36175, R78326, T12899< li>
  • Replaces International OEM number 407000R1< li>
  • I.D. (A): 1"< li>
  • O.D.: 1-3 8"< li>
  • Length: 10'< li> < UL> (Part No: 152022)
$41.76
Radiator Hose - Bulk 10'x1/2" -
  • For John Deere tractor models 350, 420, 430, 450, 500, 1010, 2010, 2510, 2520, 3010, 3020 (s n 122999-earlier), 4040, 4240, 4440, 4520, 4620, 5085M, 5100M, 5220, 5320, 5420, 5520< li>
  • Compatible with John Deere Construction & industrial models 70, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 315D, 350A, 350B, 350C, 380, 400G, 401B, 401C, 410, 440, 440A, 440B, 450B, 450C, 450D, 455D, 480A, 480B, 482, 482C, 485E, 486E, 488E, 500A (s n 123113-earlier)< li>
  • Compatible with John Deere Hay Cutting(s) 2320, 2420, 3430, 3830, 4890, 4895< li>
  • Replaces John Deere OEM number R31543, T11171, TY22562, R32641, R33678, T12397, T12815, T438T, T592T< li>
  • I.D. (A): 1 2" < li>
  • O.D.: 27 32"< li>
  • Length: 10'< li>
  • Fits Engines: 3164D, 4219DF, 4239D, 4239T, 4039, 4045, 4239D, 4239T, 4239A, 3179DF, 3179TF, 4045HLV68, 4045HLV70< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150857)
$24.76
Radiator Hose - Bulk 10'x3/4" -
  • For John Deere tractor models 500, 600, 1850, 1950, 2020, 2120, 3010, 3010 (Grove Orchard, Row Crop Standard s n 049999-ealier), 3050, 3350, 4010, 4020 (s n 200999-ealier), 6105R, 6110R, 6115M, 6115M (Engine s n CD4045RXXXXXX), 6115R, 6120R, 6125M, 6125R, 6130M (Engine s n CD4045RXXXXXX), 6130R, 6140R, 6145R, 6150R, 6155R, 6170M, 6170R, 6175R, 6190R, 6195R, 6210R, 6215R, 6300, 7200R (s n 080000-earlier), 7210R (s n 080001-later), 7215R (s n 080000-earlier), 7230R (s n 080001-later), 7250R (s n 080001-later), 7270R (s n 080001-later)< li>
  • Compatible with John Deere Combine(s) CTS (s n 670101-674000), T550 (s n 102000-104999), W540 (s n 102000-104999), W550 (s n 102000-104999), 6600, 6602, 7700< li>
  • Compatible with John Deere Harvester(s) 1070 (s n 002205-later)< li>
  • Compatible with John Deere Construction & industrial models 210K (PIN 1T8210KX, E891000-later), 210L (PIN:1T8210LX, F892600-later), 310K (PIN 1T0310KX, E219607-E277404), 310SKTC (PIN: 1T0310TK, E219607-E270402), 410K (PIN: 1T0410KX, E219607-E277405), 410KTC (PIN: 1T0410TK, E219607-E268557), 500A (s n 123113-ealier), 1110 (s n 003819-later), 1210 (s n 001501-later), 1510 (s n 001501-later)< li>
  • Replaces John Deere OEM number R27352, R26905, R32643, R27525, R27930, R32087, T10998< li>
  • I.D. (A): 3 4"< li>
  • O.D.: 1-1 8"< li>
  • Length: 10'< li>
  • Fits Engines: 4045HL496, 6068HL499, 6068RW424, 6068RW440< li>
  • For Hose Clamp use Item #: 130450< li> < UL> (Part No: 152021)
$23.80
Radiator Hose - Bulk 3 x 1-7/8" -
  • For John Deere tractor models B, BN (s n B60000-later), BNH (s n B60000-later), BO, BR, BW (s n B60000-later), BWH (s n B60000-later), 520, 530< li>
  • Compatible with John Deere Combine(s) 105< li>
  • Replaces John Deere OEM number H23740, B77R< li>
  • Replaces Case IH OEM number 407007R1< li>
  • I.D. (A): 1-7 8"< li>
  • O.D.: 2-1 4"< li>
  • Length: 3'< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 152028)
$20.50
Radiator Hose - Bulk 3 x 2-1/4" -
  • For John Deere tractor models M, MC, MT, 40, 320, 330, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 8440, 8640< li>
  • Compatible with John Deere Combine(s) 45, 55, 65< li>
  • Replaces John Deere OEM number R26294, H31009, M263T, H24921, L4577T, N71260, P43392, R26531, R32653, RN268FN, T13149, T209T< li>
  • Replaces Case IH OEM number 407010R1< li>
  • I.D. (A): 2-1 4" < li>
  • O.D.: 2-5 8"< li>
  • Length: 3'< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150819)
$24.20
Radiator Hose - Bulk 3 x 2-5/8" -
  • For John Deere tractor models A (s n 477000-later), AO (Styled s n 272000-later), AR (Styled s n 272000-later), B, 60, 620, 630< li>
  • Replaces John Deere OEM number A3317R, A4636R, B1808R, R32656< li>
  • I.D. (A): 2-5 8"< li>
  • O.D.: 3"< li>
  • Length: 3'< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150822)
$38.26
Radiator Hose - Bypass -
  • For John Deere tractor models 2040 (s n 350000-later), 2150, 2155, 2240 (s n 350000-later), 2255, 2350, 2550, 2555, 2750, 2755, 2855< li>
  • Replaces John Deere OEM number R70737< li> < UL> (Part No: 159696)
$10.46
Radiator Hose, By-Pass - For tractor models 650, 750. (Part No: 185603)$16.66
Radiator Hose, By-Pass - For model 850 up to SN# 007760. (Part No: 184586)$16.59
Radiator Hose, By-Pass - For model 950 up to SN# 010859. (Part No: 184284)$18.00
Radiator Hose, By-Pass - For model (950 SN# 010860 and up), 1050. (Part No: 181884)$8.99
Radiator Hose - Lower -
  • For John Deere tractor models M, MC, MT, 40, 320, 330< li>
  • Replaces John Deere OEM number L4576T< li>
  • 2" I.D. < li>
  • 2-5 16" O.D. < li>
  • 2-11 16" Long< li>
  • 2 Used per tractor< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 114599)
$4.16
Radiator Hose - Lower -
  • For John Deere tractor models 8770, 8870< li>
  • Replaces John Deere OEM number R110669< li>
  • 3.0" I.D.< li>
  • 2.375" I.D.< li>
  • For Hose Clamp use Item #: 122105< li> < UL> (Part No: 122106)
$69.00
Radiator Hose - Lower -
  • For John Deere tractor models 4430 (with AC), 4630 (with AC)< li>
  • Replaces John Deere OEM number R58618, R52430< li>
  • Diameter A: 2.281" I.D< li>
  • Diameter B: 2.437" I.D.< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 123163)
$30.36
Radiator Hose - Lower -
  • For John Deere Construction & industrial model 210C< li>
  • Replaces John Deere OEM number T100922< li>
  • ID: 1.875"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150826)
$15.26
Radiator Hose - Lower -
  • For John Deere Construction & industrial models 300D, 310C, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C< li>
  • Replaces John Deere OEM number T100294< li>
  • Smaller Side ID: 2.000"< li>
  • Larger Side ID: 2.312"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150827)
$25.26
Radiator Hose - Lower -
  • For John Deere tractor models 7710, 7810< li>
  • Replaces John Deere OEM number R133960< li>
  • ID: 2.000"< li>
  • For Hose Clamp use Item #: 130454< li> < UL> (Part No: 150834)
$25.00
Radiator Hose - Lower -
  • For John Deere tractor models 5410, 5420, 5510, 5520< li>
  • Replaces John Deere OEM number R135250< li>
  • 1.750" I.D.< li>
  • 2.00" I.D.< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150839)
$12.26
Radiator Hose - Lower -
  • For John Deere tractor models 2940, 2950, 3040, 3140, 3150, 3640< li>
  • Replaces John Deere OEM number L34922< li>
  • Dimension A: 1.937" I.D.< li>
  • Dimension B: 2.375" I.D.< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150844)
$24.00
Radiator Hose - Lower -
  • For John Deere tractor model 4520< li>
  • Replaces John Deere OEM number R43581< li>
  • 2.437" I.D.< li>
  • 2.120" I.D.< li>
  • For Hose Clamp use Item #: 130469< li> < UL> (Part No: 150850)
$33.76
Radiator Hose - Lower -
  • For John Deere tractor models 7210, 7410, 7510< li>
  • Replaces John Deere OEM number R128231< li>
  • A: 2.375"< li>
  • B: 2.000"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150853)
$16.26
Radiator Hose - Lower -
  • For John Deere Construction & industrial model 850< li>
  • Replaces John Deere OEM number CH11774< li>
  • ID: 1.125"< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150855)
$9.10
Radiator Hose - Lower -
  • For John Deere tractor model 8850< li>
  • Replaces John Deere OEM number R68934< li>
  • ID: 3.000"< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150881)
$13.50
Radiator Hose - Lower -
  • For John Deere tractor model 8850< li>
  • Replaces John Deere OEM number RE14364< li>
  • A: 3.500"< li>
  • B: 3.000"< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150882)
$16.76
Radiator Hose - Lower -
  • For John Deere tractor models 8430 (s n 002854-later), 8440, 8450, 8560, 8960, 8970< li>
  • Replaces John Deere OEM number R63696< li>
  • 2.750" I.D.< li>
  • 2.500" I.D.< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150885)
$9.10
Radiator Hose - Lower -
  • For John Deere tractor models 8630 (s n 003225-later), 8640, 8650< li>
  • Replaces John Deere OEM number R63697< li>
  • ID: 2.750"< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150886)
$19.76
Radiator Hose - Lower -
  • For John Deere tractor models 8630, 8640, 8760< li>
  • Compatible with John Deere Harvester(s) 7440, 9910, 9920< li>
  • Replaces John Deere OEM number R62892< li>
  • A: 2.750" I.D.< li>
  • B: 3.032" I.D.< li>
  • For Hose Clamp use Item #: 130469< li> < UL> (Part No: 150888)
$9.86
Radiator Hose - Lower -
  • For John Deere tractor model 1050< li>
  • Replaces John Deere OEM number CH13961< li>
  • 1.125" I.D.< li>
  • For Hose Clamp use Item #: 130453< li> < UL> (Part No: 159634)
$11.20
Radiator Hose - Lower -
  • For John Deere tractor models 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number R189038, R131520< li>
  • 2.50" I.D.< li>
  • 2.0" I.D.< li>
  • For Hose Clamp use Item #: 130469< li> < UL> (Part No: 159694)
$8.80
Radiator Hose - Lower -
  • For John Deere tractor model 8650< li>
  • Replaces John Deere OEM number R85365< li>
  • 2.875" I.D.< li>
  • 2.750" I.D.< li>
  • For Hose Clmap use Item #: 130470< li> < UL> (Part No: 159698)
$12.50
Radiator Hose Lower - Hose, radiator lower. For tractors: 3010, 3020, 4000 less AC, 4010, 4020 less AC. For 3010, 4010 (Part No: 114087)		$12.00
Radiator Hose Lower - New lower radiator hose with an inside diameter of 2" on the smaller side and 2.125" on the larger side. This radiator hose fits the John Deere Tractor 4000 and 4020 (SN 201000-> with air conditioning). (Part No: 123158)		$23.00
Radiator Hose Lower - Hose, radiator lower for tractors with air conditioning: 4320, 4520, 4620. For 4320, 4520, 4620 (Part No: 150851)		$21.76
Radiator Hose Lower - For tractor models 4320, 4520. (Part No: 150848)		$21.00
Radiator Hose Lower - New lower radiator hose with an inside diameter of 2" on the smaller side and 2.312" on the larger side. This radiator hose fits the John Deere Tractor 4040 (with air conditioning) or 4230 (diesel with air conditioning). For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: 123160)		$14.00
Radiator Hose Lower - Hose, radiator lower for tractor: 4320 gas. For tractor models 4040, 4230, 5020, 6030. (Part No: 123162)		$16.00
Radiator Hose Lower - Hose, radiator lower for tractors without air conditioning. For tractor models 4240, 4440. (Part No: 123165)		$17.60
Radiator Hose Lower - Hose, radiator lower for tractors: 2840, 3120, 3130. For 1020, 2020, 2510, 2520 (Part No: 150838)		$18.00
Radiator Hose, Lower - Hose, radiator lower for tractor: 2155 SN# 720000 and up, 2355N SN# 622000 and up. For 40, M, MI, MT (Part No: 150841)		$22.10
Radiator Hose, Lower - For tractor models (2355, 2555, 2755, 2855N all SN# 669788 and up). (Part No: 150842)		$19.50
Radiator Hose, Lower - Hose, radiator lower for tractors: 2510 gas. For tractor models 105, 2010, 2510, 299, 3010, 3020, 4010, 4020, 5010, 5020, 55, 6600, 6602, 7700, 95, 95H, 99. (Part No: 150843)		$21.50
Radiator Hose, Lower - Hose, radiator lower for tractors: 2510 diesel, 2520. For 105, 2010, 2510, 299, 3010, 3020, 4010, 4020, 5010, 5020, 55, 6600, 6602, 7700, 95, 95H, 99 (Part No: 159695)		$16.50
Radiator Hose, Lower - For tractor models 4430. For 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: 114004)		$13.00
Radiator Hose, Lower - For tractor models 4040 without air conditioning, 4230 diesel without air conditioning. (Part No: 114005)		$16.00
Radiator Hose, Lower - New lower radiator hose with an inside diameter of 1.875" on the smaller side and 2.375" on the larger side. This radiator hose fits the John Deere Tractor 4030 (diesel) or 4030 (gas). (Part No: 150835)		$12.76
Radiator Hose, Lower - For tractor models 4640, 4840, 9940. (Part No: 123166)		$19.00
Radiator Hose, Lower - For tractor models 1640, 1840, 2040, 2140. (Part No: 150840)		$7.76
Radiator Hose, Lower - Hose, radiator lower for tractors: 5200, 5300, 5400, 5400N, 5500, 5500N. (Part No: 122110)		$8.70
Radiator Hose, Lower - Hose, radiator lower for tractors: 4050, 4250, 4450 to SN# 006509, 4055, 4255, 4455. (Part No: 123167)		$6.00
Radiator Hose, Lower - 1.875" I.D. For tractor models 1020, 2020, 2030, 300B, 301A, 300, 301, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B. All with gas engines. (Part No: 150785)		$14.76
Radiator Hose, Lower - For tractor models 770, 790. (Part No: 182776)		$17.76
Radiator Hose, Lower - For model 850. (Part No: 185135)$35.00
Radiator Hose, Lower - For model 950 up to SN# 010859. (Part No: 150836)$10.26
Radiator Hose, Lower - For model 950 SN# 010860-020000. (Part No: 181907)$10.51
Radiator Hose, Lower - This lower radiator hose measures 1.875 inside diameter. For models tractor models 1010-D, 1020-D, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1630, (All early 1550, 1750, 1830, 2020-D, 2030-D, 2040U, 2120, 2130, 2150, early 2155, 2240, 2255, 2440, 2630, 2640, 301A, 820 3 cyl, 830 3 cyl, 840, 920, 930, 940, (Industrial - 300, 300B, 301, 302, 310, 380, 400, 401, 410, 480), (Skidder - 24, 440, 440A, 440B) (Part No: 115445)		$8.80
Radiator Hose, Lower - New lower radiator hose with an inside diameter of 2.5 inches. Used on John Deere 4240 (W AC), 4240S, 4350, 4440 (W AC). (Part No: 123164)		$16.76
Radiator Hose, Lower -
  • For John Deere tractor models 4120, 4320, 4520, 4720< li>
  • Replaces John Deere OEM number LVU14769< li>
  • LOA = 16"< li>
  • Inside Diameter 1: 1.47"< li>
  • Inside Diameter 2: 1.7"< li> < UL> (Part No: 170502)
$24.76
Radiator Hose - Lower, L100590 -
  • For John Deere tractor models 7200, 7400, 7500 (s n 001817-earlier)< li>
  • Replaces John Deere OEM number L100590< li>
  • A: 2.375"< li>
  • B: .875"< li> < UL> (Part No: 150852)
$78.00
Radiator Hose - Upper -
  • For John Deere tractor models 1520, 1830 (s n 131025 - later), 2020, 2030 (used if chasis s n ends in "L"), 2120, 2130 (s n 131025 - later), 2440< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 380, 400, 401, 440, 440A< li>
  • Replaces John Deere OEM number L29263< li>
  • 1.5" I.D.< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 115446)
$8.26
Radiator Hose - Upper -
  • For John Deere tractor models 8770, 8870< li>
  • Replaces John Deere OEM number R110670< li>
  • 2.375" I.D.< li>
  • For Hose Clamp use Item #: 122106< li> < UL> (Part No: 122105)
$55.70
Radiator Hose - Upper -
  • For John Deere tractor model 4430< li>
  • Replaces John Deere OEM number R52426< li>
  • Diameter A: 2"< li>
  • Diameter B: 2-1 2"< li>
  • For Hose Clamp use Item #: 130469< li> < UL> (Part No: 123159)
$10.00
Radiator Hose - Upper -
  • For John Deere Construction & industrial models 210C, 482C< li>
  • Replaces John Deere OEM number T100921< li>
  • ID: 1.500"< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150789)
$19.08
Radiator Hose - Upper -
  • For John Deere Construction & industrial models 300D, 310C, 310D, 315C, 315D, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, 710D< li>
  • Replaces John Deere OEM number T68579< li>
  • B: 1.92" I.D.< li>
  • A: 2.00" I.D.< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150790)
$26.33
Radiator Hose - Upper -
  • For John Deere tractor model 7600< li>
  • Replaces John Deere OEM number R95018< li>
  • A: 2.375" I.D.< li>
  • B: 2.000" I.D.< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150791)
$25.50
Radiator Hose - Upper -
  • For John Deere tractor model 950< li>
  • Replaces John Deere OEM number CH11789< li>
  • ID: 1.125"< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150794)
$8.50
Radiator Hose - Upper -
  • For John Deere tractor models 3030 (s n 187677-earlier), 3120, 3130 (s n 187677-earlier)< li>
  • Replaces John Deere OEM number T28425< li>
  • A: 1.950"< li>
  • B: 2.125"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150797)
$20.76
Radiator Hose - Upper -
  • For John Deere tractor models 301, 2510 (Diesel), 2520< li>
  • Replaces John Deere OEM number R38312< li>
  • ID: 1.500"< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150799)
$9.20
Radiator Hose - Upper -
  • For John Deere tractor models 1640, 1840 (s n 429999-earlier), 2040 (European s n 430000-later), 2140, 2350, 2550, 2750< li>
  • Replaces John Deere OEM number L34898, VPE4100< li>
  • ID: 1.500"< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150800)
$9.86
Radiator Hose - Upper -
  • For John Deere tractor models 2940, 2950, 3040, 3140, 3150, 3640, 4040< li>
  • Replaces John Deere OEM number L32456, VPE4103< li>
  • A: 2.000"< li>
  • B: 2.125"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150804)
$20.30
Radiator Hose - Upper -
  • For John Deere tractor model 4520 (w o AC)< li>
  • Compatible with John Deere Combine(s) 4400< li>
  • Replaces John Deere OEM number R43582< li>
  • A: 2.000" I.D.< li>
  • B: 2.5000" I.D.< li>
  • For Hose Clamp use Item #: 130469< li> < UL> (Part No: 150809)
$15.30
Radiator Hose - Upper -
  • For John Deere tractor models 4520, 4620 (w AC)< li>
  • Replaces John Deere OEM number R46521< li>
  • A: 2.000" I.D.< li>
  • B: 2.250" I.D.< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150810)
$15.50
Radiator Hose - Upper -
  • For John Deere tractor models 4560, 4755 (s n 10001-later), 4760, 4955 (s n 10001-later), 4960< li>
  • Replaces John Deere OEM number R109502< li>
  • A: 2.250"< li>
  • B: 2.500"< li>
  • For Hose Clamp use Item #: 130469< li> < UL> (Part No: 150812)
$15.26
Radiator Hose - Upper -
  • For John Deere tractor models 7200, 7400< li>
  • Replaces John Deere OEM number R113176< li>
  • ID: 2.375"< li>
  • For Hose Clamp use Item #: 111917< li> < UL> (Part No: 150814)
$21.80
Radiator Hose - Upper -
  • For John Deere tractor models 7210, 7410, 7510< li>
  • Replaces John Deere OEM number R133844< li>
  • ID: 2.375"< li>
  • For Hose Clamp use Item #: 111917< li> < UL> (Part No: 150815)
$22.26
Radiator Hose - Upper -
  • For John Deere tractor model 8650< li>
  • Replaces John Deere OEM number R73645< li>
  • A: 2.750"< li>
  • B: 2.250"< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150816)
$31.26
Radiator Hose - Upper -
  • For John Deere tractor model 4030< li>
  • Replaces John Deere OEM number TY22430< li>
  • ID: 2.120"< li>
  • For Hose Clamp use Item #: 130454< li> < UL> (Part No: 150862)
$8.20
Radiator Hose - Upper -
  • For John Deere tractor model 2510 (Gas)< li>
  • Compatible with John Deere Construction & industrial model 480< li>
  • Replaces John Deere OEM number TY22409< li>
  • ID: 1.500"< li>
  • For Hose Clamp use Item #: 130452< li> < UL> (Part No: 150870)
$8.20
Radiator Hose - Upper -
  • For John Deere tractor models 2955 (w cab s n 664560-later), 3055, 3155 (s n 664560-later), 3255< li>
  • Replaces John Deere OEM number L62211< li>
  • ID: 2.000"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150872)
$13.50
Radiator Hose - Upper -
  • For John Deere tractor models 8430 (1974-1981), 8440, 8450, 8630< li>
  • Replaces John Deere OEM number R62286< li>
  • ID: 2.250"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150875)
$9.46
Radiator Hose - Upper -
  • For John Deere tractor models 8430 (1974-1981), 8440, 8450, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 6810, 6910< li>
  • Replaces John Deere OEM number R57388< li>
  • A: 2.250" I.D.< li>
  • B: 2.500" I.D.< li>
  • For Hose Clamp use Item #: 111917< li> < UL> (Part No: 150876)
$9.60
Radiator Hose - Upper -
  • For John Deere tractor model 8640< li>
  • Replaces John Deere OEM number R61826< li>
  • ID: 2.250"< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 150878)
$6.80
Radiator Hose - Upper -
  • For John Deere tractor models 3055, 4960, 5200 (s n 421065-earlier), 5300 (s n 431919-ealier), 5400 (s n 441686-earlier)< li>
  • Replaces John Deere OEM number R105074< li>
  • 1.50" I.D.< li>
  • For Hose Clamp use Item #: 130454< li> < UL> (Part No: 159692)
$7.56
Radiator Hose - Upper -
  • For John Deere tractor models 8120, 8120T, 8200, 8200T, 8320, 8320T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number R164844< li>
  • 2.50" I.D.< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 159693)
$26.80
Radiator Hose - Upper -
  • For John Deere Construction & industrial model 410 (Diesel)< li>
  • Replaces John Deere OEM number T33401< li>
  • 1.50" I.D.< li>
  • For Hose Clamp use Item #: 130454< li> < UL> (Part No: 159699)
$21.00
Radiator Hose - Upper -
  • For John Deere tractor models 3120, 3203, 3320, 3520, 3720, 4105< li>
  • Replaces John Deere OEM number LVU16447, LVU19513< li>
  • I.D. 1.30"< li> < UL> (Part No: 169207)
$13.26
Radiator Hose Upper - Hose, radiator upper for tractors: 2840, 3030 & 3130 SN# 189678 and up. For 40, M, MI, MT (Part No: 150796)		$18.26
Radiator Hose Upper - For tractor models 4040, 4230, 5020, 6030. (Part No: 114006)		$16.76
Radiator Hose Upper - Hose, radiator upper for tractor: 2630. For tractor models 4040, 4230, 5020, 6030. (Part No: 115714)		$20.00
Radiator Hose Upper - Hose, radiator upper for tractors: 2640. (Part No: 115715)		$15.76
Radiator Hose Upper - Hose, radiator upper for diesel tractors:1520, 2020, 2030, 2130 to SN# 131023, 2440 to SN# 305414. For 1520, 2020, 2030, 2130, 2240, 2440 (Part No: 150786)		$11.40
Radiator Hose Upper - Hose, radiator upper for tractor: 4320. Replaces R46452. (Part No: 150874)		$13.00
Radiator Hose, Upper - For tractor models 6200, 6300, 6400, 6500. (Part No: 150860)		$16.26
Radiator Hose, Upper - For tractor models 2955 to SN# 660812 without sound guard body~ to SN# 664559 with sound guard body, 3155 to SN# 664559 with sound guard body. For 40, M, MI, MT. (Part No: 150805)		$15.00
Radiator Hose, Upper - For tractor models 2155, 2355N. (Part No: 150802)		$14.50
Radiator Hose, Upper - For model 4050 with 6359TR engine and tractor SN# 6510 and up. (Part No: 150807)		$23.26
Radiator Hose, Upper - Hose, radiator upper for tractors: 4250, 4450 with 6466TR SN# 322746 and up, 4055, 4255, 4455. For 4555, 4650, 4755, 4850, 4955 (Part No: 123170)		$12.00
Radiator Hose, Upper - Hose, radiator upper for tractors: 940, 1040, 1140, 2040 to SN# 350000 and up, 2155, 2240 350000 and up. (Part No: 122109)		$8.26
Radiator Hose, Upper - For tractor models 2355, 2555, 2755, 2855N. (Part No: 150795)		$12.79
Radiator Hose, Upper - For tractor models 2355, 2555, 2755, 2855N. (Part No: 150867)		$9.29
Radiator Hose, Upper - Hose, radiator outer upper for tractors: 2355, 2555, 2755, 2855N SN# 669788 and up. (Part No: 150869)		$11.55
Radiator Hose, Upper - Hose, radiator outer upper for tractors: 2955 to SN# 660813 and up without sound guard body~ SN# 664560 and up with sound guard body, 3055, 3155 SN# 664560 and up, 3255. (Part No: 150873)		$15.76
Radiator Hose, Upper - For tractor models 3010, 3020, 4000, 4010, 4020. (Part No: 114089)		$11.40
Radiator Hose, Upper - Hose, radiator upper for tractors:4050 SN# 005511-006509 with 6466DR and TR, 4250 engine to SN# 322745 and up with 6466TR. 4440, 4450 engine to SN# 322745 with 6466TR, 4630. (Part No: 123161)		$11.16
Radiator Hose, Upper - Hose, radiator upper for tractors: 4050 to SN# 005510, 4240. (Part No: 150806)		$9.00
Radiator Hose, Upper - Hose, radiator upper for tractors: 4650, 4850, 4555, 4755, 4955, 4560, 4760, 4960. (Part No: 123168)		$8.28
Radiator Hose, Upper - 2.250" I.D on one end and 2.500" I.D on the other. For tractor models 4640, (4650 SN# 324214 and below), 4840, (4850 SN# 322745 and below), 9940, 9950. (Part No: 123169)		$12.50
Radiator Hose, Upper - For tractor models 650, 750. (Part No: CH15528)$26.62
Radiator Hose, Upper - For model 850 SN# 007761 and up. Replaces CH14029. (Part No: 150818)		$9.09
Radiator Hose, Upper - For model 850 up to SN# 007760. (Part No: 181904)		$14.80
Radiator Hose, Upper - For model (950 SN# 010860 and up), 1050. Replaces CH14033, CH19298, CH14029. (Part No: 150818)$9.09
Radiator Hose, Upper - 1.5" I.D.. For model 1020 with gas engine. (Part No: 150798)		$18.00
Radiator Hose, Upper - This upper radiator hose measures 1 1 2 inch inside diameter. For models tractor models 1010 Diesel, 1020 Diesel, 1030, 1120, 1130, 1530, 1630, 2040U early, 2240 early, 820 3 cyl, 830 3 cyl, 920, 930. Replaces U16915, T23534 (Part No: 115585)		$8.09
Radiator - models w/ propane -
  • For John Deere tractor models 4000 (with propane engine), 4020 (with propane engine)< li>
  • Replaces John Deere OEM number AR46434, AR49454, AR40832< li>
  • Overall Height: 31-1 4"< li>
  • Overall Width: 20-5 8"< li>
  • Core Height: 24-1 4"< li>
  • Core Width: 19-1 2"< li>
  • Depth: 2-3 4"< li>
  • Rows: 5< li>
  • Fins Per Inch: 9< li>
  • Fill Neck Height: 1-1 4"< li>
  • Inlet: 2"< li>
  • Outlet: 2"< li> < UL> (Part No: 119661)
$860.00
Radiator Mounting Pad - Radiator Mounting pad with rivets. For tractor models M, 40, 320, 330, 430, 435, 440, Crawlers. Priced each. If you order 1, you will receive 1 pad. (Part No: 116919)		$10.99
Radiator - OEM Style Top Tank -
  • For John Deere tractor model 3020< li>
  • Replaces John Deere OEM number R34457, AR40831, AR46016, R39517, R39607< li>
  • Overall Height: 29-1 2"< li>
  • Overall Width: 19-1 2"< li>
  • Core Height: 22-7 16"< li>
  • Core Width: 18"< li>
  • Depth: 2"< li>
  • Rows: 3< li>
  • Fins Per Inch: 8< li>
  • Fill Neck Height: 1"< li>
  • Inlet: 2"< li>
  • Outlet: 2"< li>
  • Top tank is OEM style with enhanced air intake clearance< li> < UL> (Part No: 152268)
$580.00
Radiator Pivot Bracket -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560276< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165254)
$165.80
Radiator Strap - For tractor models: 60, 620, 630, 70, 720, 730, A, AO, AR, (G from s n 13000 and up). (Part No: 180708)$22.00
Radiator Strap - For tractor models: 50, 520, 530, B, BO, BR. (Part No: 182810)$16.26
Radiator Strap - For Model: G from s n 4251 to 12999. (Part No: 179477)$25.00
Radiator Strap - For Model: H. (Part No: 180656)$15.26
Radiator Support Bracket -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560280< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165252)
$133.90
Radiator Support Bracket -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE587517< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165253)
$111.20
Radiator Tank, Top - For tractor models 620, 630 except Orchards. Replaces: A5722R, R20880R (Part No: 180693)		$580.00
Radiator Water Pipe, Lower - For tractor models: (720 diesel with electric start from serial number 7222000), (730 diesel with electric start). (Part No: 179509)		$47.26
Radiator Water Pipe, Upper - Pipe only, no casting. For Model: G up to s n 12999. Also replaces F488R, AF255R, AF498R. (Part No: 180417)$46.33
Reservoir Filler Cap -
  • For John Deere tractor models SE6010 (European), SE6020 (European s n 425337-earlier), SE6100 (European), SE6110 (European), SE6120 (European s n 425337-earlier), SE6200 (European), SE6210 (European), SE6220 (European s n 425337-earlier), SE6300 (European), SE6310 (European), SE6320 (European s n 425337-earlier), SE6400 (European), SE6410 (European), SE6420 (European s n 425337-earlier), SE6510 (European), SE6520 (European s n 425337-earlier), SE6610 (European), SE6620 (European s n 425337-earlier), 5080R (European), 5083, 5093, 5100R (European), 5101, 5325, 5415, 5425, 5525, 5603, 5615, 5620 (European), 5625, 5715, 5720 (European), 5725, 5820 (European), 6010 (European), 6020 (European s n 425337-earlier), 6110, 6120 (s n 425337-earlier), 6200, 6205 (European), 6210, 6215 (s n 425337-earlier), 6220 (s n 425337-earlier), 6300, 6310, 6320 (s n 425337-earlier), 6400, 6405, 6410, 6410L, 6410S, 6415, 6420 (s n 425337-earlier), 6425, 6500, 6505 (European), 6506 (European), 6510 (European), 6515 (European s n 425337-earlier), 6520 (European s n 425337-earlier), 6600 (European), 6605, 6610 (European), 6615 (s n 425337-earlier), 6620 (European s n 425337-earlier), 6715 (s n 425337-earlier), 6800 (European), 6810 (European), 6820 (European s n 425337-earlier), 6900 (European), 6910 (European), 6920 (European s n 425337-earlier), 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 9100 (s n 020921-later), 9120, 9200 (s n 020921-later), 9220, 9300 (s n 020921-later), 9300T, 9320, 9320T, 9400 (s n 020921-later), 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Construction & industrial models 3215 (s n 206801-later), 3415 (s n 206801-later)< li>
  • Replaces John Deere OEM number AL76661< li> < UL> (Part No: 126943)
$11.40
Reservoir Filler Cap with Bypass -
  • For John Deere tractor models SE6010 (European), SE6020 (European s n 425337-earlier), SE6100 (European), SE6110 (European), SE6120 (European s n 425337-earlier), SE6200 (European), SE6210 (European), SE6220 (European s n 425337-earlier), SE6300 (European), SE6310 (European), SE6320 (European s n 425337-earlier), SE6400 (European), SE6410 (European), SE6420 (European s n 425337-earlier), SE6510 (European), SE6520 (European s n 425337-earlier), SE6610 (European), SE6620 (European s n 425337-earlier), 5080R (European), 5083, 5093, 5100R (European), 5101, 5325, 5415, 5425, 5525, 5603, 5615, 5620 (European), 5625, 5715, 5720 (European), 5725, 5820 (European), 6010 (European), 6020 (European s n 425337-earlier), 6110, 6120 (s n 425337-earlier), 6200, 6205 (European), 6210, 6215 (s n 425337-earlier), 6220 (s n 425337-earlier), 6505 (European), 6506 (European), 6510 (European), 6515 (European s n 425337-earlier), 6520 (European s n 425337-earlier), 6600 (European), 6605, 6610 (European), 6615 (s n 425337-earlier), 6620 (European s n 425337-earlier), 6715 (s n 425337-earlier), 6800 (European), 6810 (European), 6820 (European s n 425337-earlier), 6900 (European), 6910 (European), 6920 (European s n 425337-earlier), 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 9100 (s n 020921-later), 9120, 9200 (s n 020921-later), 9220, 9300 (s n 020921-later), 9300T, 9320, 9320T, 9400 (s n 020921-later), 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Construction & industrial models 3215 (s n 206801-later), 3415 (s n 206801-later)< li>
  • Replaces John Deere OEM number AL78005< li> < UL> (Part No: 126945)
$9.00
Rubber Radiator Mounting Strap -
  • For John Deere tractor models 2940, 2950, 2955, 3010, 3020, 3040, 3140, 3150, 3155, 3255, 3640, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 6030, 7020, 7520, 8560, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600, 690, 690A, 760< li>
  • Replaces John Deere OEM number R26413< li> < UL> (Part No: 156255)
$2.70
Surge Tank Cap -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5078E, 5080M, 5083E, 5083EN, 5085M, 5090E, 5090M, 5093E, 5093EN, 5095M, 5095MH, 5100M, 5101E, 5101EN, 5105M, 5105ML, 6100D, 6110D, 6110E, 6110J, 6115D, 6125D, 6125E, 6130D, 6140D, 6415< li>
  • Compatible with John Deere Combine(s) C670, S550, S560, S650, S660, S670, S670HM, S680, S680HM, S685, S685HM, S690, S690HM, S760, S770, S780, S790, T550, T560, T660, T670, W540, W550, W650, W660, 1450 CWS, 1450 WTS, 9470 (STS), 9540 WTS, 9560 STS, 9560 WTS, 9570 STS, 9580 WTS, 9670 STS, 9770 STS< li>
  • Compatible with John Deere Harvester(s) CH330, CH530, CH570, CH670, CP690, CS690, 3510, 3520, 7280, 7380, 7460, 7480, 7580, 7660, 7760, 7780, 9700, 9800< li>
  • Compatible with John Deere Construction & industrial models 120D, 200DLC, 210LJ, 240DLC, 250D, 270DLC, 300D, 310J, 310SJ, 315SJ, 325J, 335D, 337E, 350DLC, 410J, 435, 437D, 444J, 444JR, 444K, 450J, 460DC, 460DG, 524K, 540H, 544J, 544K, 548H, 550J, 560D, 608B, 608L, 608S, 624J, 624K, 624KR, 640GII, 640H, 644J, 644K, 648GII, 648H, 648HTJ, 650J, 670G, 670GP, 672G, 672GP, 700J, 700JII, 703G, 703JH, 710J, 724K, 744K, 748GIII, 748H, 748HTJ, 750J, 750JII, 753G, 753GL, 753J, 753JH, 759G, 759J, 759JH, 764, 770G, 770GP, 810D, 810E, 824K, 844K, 844KII, 848H, 848HTJ, 850, 850J, 850JII, 853J, 853JH, 870G, 870GP, 872G, 872GP, 903J, 903JH, 903K, 903KH, 903M, 909J, 909JH, 909K, 909KH, 909M, 909MH, 953J, 953K, 953M, 959J, 959K, 959M, 1010D, 1010E, 1070E, 1110D, 1110E, 1170E, 1210E, 1270E, 1410D, 1470E, 1490D, 1510E, 1910E, 2154 (D), 2454 (D), 2954 (D), 3754 (D)< li>
  • Compatible with John Deere Hay Cutting(s) A400, D450, R450< li>
  • Replaces John Deere OEM number AT310335< li>
  • Pressure Rating: 15 lbs.< li> < UL> (Part No: 189100)
$12.00
Thermostat - 180 degree. For tractor models 1020, 1120, 1350, 1550, 1630, 1750, 1830, 1850, 1850N, 1950, 1950N, 2020, 2030, 2120, 2320, 2420, 2520, 301A, 302, 3300, 401D, 410B, (6010 serial number 575237 and below), 6110 serial number 575555 and below), (6210 serial number 575489 and below), 6320, 6410, 6420, 6420S, 6510, (6520 serial number 599999 and below), 6610, (6620 serial number 799999 and below), 6810, 6820, 6910, 6910S, 6920, 6920S, 7600, 7610, 830, 930, 300, 301, 400, 401. Replaces AT22961, AT22961 and RE33705 (Part No: 109418)		$9.70
Thermostat - 180 degree. For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, 500B, 5010, 5020, 600, 6030, 700A, 760, 760A. (Part No: 109692)		$11.40
Thermostat - 192 degree. For tractor models 1020, 1120, 1630, 1830, 2020, 2030, 2040, 2120, 2240, 2440, 2510, 2520, 930. (Part No: 167528)$9.56
Thermostat - 180 degree. For tractor models 2955, 3030, 3040, 3050, 3055, (3130 SN# 255170 and up), 3140, 3155, 3255, 3350, 3640, 3650, 4040, 4040S, 4240, 4240S, 4440, 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900, 7600, 7700, 7800, 8100, 8200, 8300, 8400. (Part No: 109418)		$9.70
Thermostat - 180 degree. For tractor models (1040, 1140, 1350, 1550, 1750, 1850, 1850N all with 3179D engine), 1830, 2030, (2040, 2040S, 2130, 2250 all with 4239D engine), (2140 with 4239T engine), 2150, 2155, (2240 SN# 350000 and up), 2255. (Part No: 113746)$9.20
Thermostat -
  • For John Deere Construction & industrial models 80 (Engine Code: 4TNE98-JCF), 244H (Engine Code: 4TNE98-JFW), 304H (Engine Code: 4TNE98-JLW)< li>
  • Replaces John Deere OEM number AT211781< li> < UL> (Part No: 168236)
$23.26
Thermostat -
  • For John Deere tractor models 955, 2840, 2940, 2950, 2955, 3030, 3050, 3055, 3110, 3120, 3130, 3150, 3155, 3210, 3640, 4030, 4040< li>
  • Compatible with John Deere Combine(s) 950, 955, 1055, 1157, 4400, 4420, 4425, 4435, 6600< li>
  • Compatible with John Deere Harvester(s) 484, 499, 699, 7440, 7445, 9900, 9910, 9920< li>
  • Compatible with John Deere Construction & industrial models 444, 444C, 444CH, 444D, 540, 540A, 544, 544A, 570, 570A, 570B, 710B< li>
  • Replaces John Deere Casting number R60257< li>
  • Replaces John Deere OEM number AR77411< li>
  • 195 Degrees Fahrenheit< li> < UL> (Part No: 176982)
$110.00
Thermostat - 180 - For tractor models 2840, 3120, 3130, 3420, 3530, 4030. Replaces AR7060 (Part No: 179054)		$59.00
Thermostat Cover Gasket - Fits John Deere Tractors: 4050, 4055, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6320, 6420, 6520, 6620, 6820, 6920, 7020, 7220, 7320, 7420, 7520, 7700, 7710, 7720, 7800, 7810, 7820, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560, 8570, 8650, 9100, 9120. John Deere Industrial models: 560D, 640E, 644C, 644D, 644E, 644G, 644H, 646C, 690B, 690C, 693C, 740A, 743, 743A, 750C, 762B, 770B, 790, 790D, 792, 793, 850B, 870, 872. Replaces R124607, R46479 (Part No: 155331)		$4.80
Thermostat Cover Gasket -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 5010, 5020< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Compatible with John Deere Engine(s) 254 (diesel)< li>
  • Replaces John Deere OEM number R42694, R26474< li>
  • Sold individually< li> < UL> (Part No: 155332)
$1.70
Thermostat Housing - For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 5010, 5020, 6030. Thermostat Housing. Replaces AR39598, AR44840, R26470, R36814, R39690, R41853, R42664 (Part No: 156639)		$63.60
Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Part No: 125600)		$8.06
Thermostat Housing Cover - For tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, (2040, 2240 SN# 349999 and below), 2120, (2440 SN# 305414 and below), 2630, 2640, 300, (300B, 301A, 302, 302A SN# 345266 and below), 301, 400, 401, (401B SN# 468294 and below), (401C SN# 305414 and below), 820, 830, 920, 930. (Part No: 159569)		$25.00
Thermostat Housing Cover - Used on gas engines. For tractor models 1020, 1520, 1830, 2020, 2030, 210C, 2130, 2440, 2510, 2520, 300, 300B, 301, 302, 302A, 310, 310A, 310B, 400, 401, 401B, 401C, 401D, 410. (Part No: 159570)		$18.76
Thermostat Housing Gasket - Used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2255, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N, 3030, 3100, 3200, 3300, 3350, 3400, 830, 840, 930, 940, this gasket replaces John Deere part number T20215 (Part No: 155335)		$2.06
Transmission Oil Cooler - This Transmission Oil Cooler is used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400 where an Oil Cooler is used. It replaces original part numbers AR69398, AT165535, AT169229, AT77459 (Part No: 121811)		$380.00
Transmission Oil Cooler - This Transmission Oil Cooler uses 5 8 inch hoses. Verify hose size as a 3 4 inch was also originally produced but is not available. Used on models 2350, 2550, 2750, 2950, 3150, 2940, 1640, 1840, 2040, 2040S, 2140, 3040, 3140. It AL31239, AL38448 (Part No: 128378)		$380.00
Upper Radiator Hose - Used on John Deere 3005 Compact Tractor, 770 Compact Tractor, 970 Compact Tractor, this upper hose has a 1.30 inch inside diameter on both sides. Replace John Deere part number M802633 (Part No: 169206)		$15.00
Upper Water Pipe, Radiator - For model B SN# 201000 and up 1947-1953. Must weld to existing casting. Replaces AB3601R. (Part No: 179109)		$85.00
Upper Water Pipe, Radiator - For model G styled SN# 13000 and up. Must weld to existing casting. Replaces AF651R. Made in the USA. (Part No: 179475)		$88.00
Upper Water Pipe, Radiator - For model B SN# (96000 to 200999) 1941-1946. Must weld to existing casting. Replaces AB2740R. Made in the USA. (Part No: 179105)		$95.00
Vapor Condenser - For tractor models 1640, 2040, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150, 3640. (Part No: 117573)		$290.70
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 3155, 3255, 3650, 6200 (s n 125189-earlier), 6300 (s n 125189-earlier), 6400 (s n 125189-earlier)< li>
  • Replaces John Deere OEM number AL69178, RE29482, AL66912< li> < UL> (Part No: 156788)
$316.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T< li>
  • Replaces John Deere OEM number RE274870, RE188987, RE37443, AR96822< li> < UL> (Part No: 156789)
$635.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE50225, RE37444, AR96825< li> < UL> (Part No: 156790)
$570.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6410, 6410L, 6410S, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL118091, AL111577< li>
  • Shaft Size: 25.3 MM< li>
  • Stud Length: 17.5 MM< li>
  • Number Of Studs: 4< li>
  • Thread Pitch: 1.25< li>
  • Stud Diameter: 7.9 MM< li>
  • Viscous Drive< li> < UL> (Part No: 156791)
$270.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 7710, 7810< li>
  • Replaces John Deere OEM number RE70548, RE65834< li> < UL> (Part No: 156792)
$408.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8230, 8230T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8330, 8330T, 8400< li>
  • Replaces John Deere OEM number RE155581, RE188988, RE274871< li> < UL> (Part No: 156793)
$710.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 8410, 8410T, 8420, 8420T< li>
  • Replaces John Deere OEM number RE274876, RE166013, RE220071, RE184071, RE187516< li> < UL> (Part No: 156794)
$1050.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 8560, 8760, 8770, 8870< li>
  • Replaces John Deere OEM number RE30168< li> < UL> (Part No: 156795)
$975.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 8850, 8960< li>
  • Replaces John Deere OEM number RE24149< li> < UL> (Part No: 156796)
$1350.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 9300, 9400< li>
  • Replaces John Deere OEM number RE159103, RE62618, RE159906, RE170600< li> < UL> (Part No: 156797)
$1775.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 2955 (s n 767516-earlier), 3055< li>
  • Replaces John Deere OEM number AL69177, AL66911, RE26919< li> < UL> (Part No: 162873)
$337.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6506, 6600, 6800, 6900, 7500, 7600, 7700, 7800< li>
  • Replaces John Deere OEM number AL79618, RE34438< li> < UL> (Part No: 162875)
$500.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420, 6420L, 6520L< li>
  • Replaces John Deere OEM number AL155873, AL167769< li> < UL> (Part No: 162879)
$403.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 6615, 6715, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL155874, AL167770< li> < UL> (Part No: 162881)
$410.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 2355, 2555, 2650, 2755, 2850, 2855N< li>
  • Replaces John Deere OEM number AL69176, RE26957, AL66910< li> < UL> (Part No: 162882)
$415.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 7630, 7730, 7830, 7930< li>
  • Replaces John Deere OEM number RE577314, RE226374, RE278587< li> < UL> (Part No: 162883)
$1200.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 7600, 7700, 7800< li>
  • Replaces John Deere OEM number RE56931, RE34439< li> < UL> (Part No: 162884)
$820.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 9120, 9220< li>
  • Replaces John Deere OEM number RE274874, RE190791< li> < UL> (Part No: 162888)
$770.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 7210, 7410, 7510< li>
  • Replaces John Deere OEM number RE165218, RE64271< li>
  • Shaft Size: 1"< li>
  • Stud Length: 11 16"< li>
  • Number of Studs: 4< li>
  • Thread Pitch: 1.25< li>
  • Stud Diameter: 5 16"< li> < UL> (Part No: 167476)
$465.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 8300 (s n 009999-earlier), 8400 (s n 009999-earlier)< li>
  • Replaces John Deere OEM number RE274872, RE63003< li> < UL> (Part No: 169046)
$370.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 9120, 9220, 9320, 9320T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number RE190793< li> < UL> (Part No: 170741)
$650.00
Viscous Fan Clutch Assembly -
  • For John Deere tractor models 6910, 6910S< li>
  • Replaces John Deere OEM number AL111576< li> < UL> (Part No: 180307)
$551.48
Viscous Fan Unit - This viscous fan unit is used on John Deere (6200, 6400, 6500, 6500L, 6600 all with AC and all serial number 152145 and up), (6800, 6900 below serial number 152144. Replaces original part number AL81448. (Part No: 150730)		$415.00
Water Pipe, Lower - For tractor models 520, 530. (Part No: 179952)$58.00
Water Pipe, Lower - For tractor models (70 LP, gas & All-fuel), (G with water pump). (Part No: 179146)$38.26
Water Pipe, Lower - For tractor models 720, 730 both gas or LP. (Part No: 182799)$45.16
Water Pipe, Upper - For tractor models (60 LP SN# 6026000 to 6030926), (60 from SN# 6054580 and above), 620, 630. (Part No: 157975)$86.77
Water Pipe, Upper - For model H from SN# 27000 and above. (Part No: 179655)$38.54
Water Pump - Water pump with 1 groove pulley. For diesel tractors: 2350, 2550, 2750 (prior to serial number 594282). Replaces John Deere casting number R70437. For 2350, 2550, 2750 Replaces AR65262, AR92147, AR92416, AR92417, AR92418, AR92903, RE19717, RE25043, RE26937, RE26955, RE40151, RE46238, RE46257, RE60489, RE92414. (Part No: 107989)		$168.00
Water Pump - Water pump with 1 groove, cast 5-inch diameter pulley. For diesel models: 820, 830, 1020, 1030, 1520, 2020, 2030, 2040, 2240 (prior to SN# 349999), 2440. Replaces John Deere casting numbers R51039, R55758. (Part No: 150365)		$144.00
Water Pump - Water pump with 1 groove, cast 6.25-inch diameter pulley. For diesel tractors: 2155(prior to SN# 751023), 5500(prior to SN# 248699). Replaces John Deere casting numbers R70437, R78286, R100812. For 2155, 5500 (Part No: 101900)$199.01
Water Pump - New water pump with hub, high flow style has improved impellor for 4.5 liter & 6.8 liter "power tech" engines, complete with gaskets. Models:6110, 6120, 6210, 6215, 6220, 6310, 6320, 6403, 6405, 6410, 6415, 6420, 6603, 6605, 6615, 7220, 7320, 7420, 7515, 7520, 7720, 7810, 7815, 7820, 7920, 6110L, 6210L, 6310L, 6310S, 6410L, 6410S, 6510L, 6510S. (Part No: 113579)		$74.00
Water Pump - For tractor models 650, 750. Includes Gasket. Replaces CH15506, CH15508, CH15502 (Part No: 113455)		$102.88
Water Pump - For tractor models 6200, 6300, 6400, 6500, 7600. Replaces R91403, R102846, RE41157, RE53757, R102847. (Part No: 113447)		$111.90
Water Pump - This is a new Water Pump with Gasket. It is used on John Deere 1010 (Ag Tractors Only, Gas Or Diesel SN 21901>) and 2010 (Ag Tractors Only, Gas & Diesel). With pulley. Casting # RT12712 Replaces AT11918, R12712, T12712. This water pump does not fit crawlers or industrial models. (Part No: 108036)		$110.00
Water Pump - For model 5200 SN# 248700>. Water Pump, Marked: R67188. (Part No: 173078)		$325.00
Water Pump - For (5210, 5220, 5320)(5300, 5400, all sn 248700>). Water Pump, marked R73601. Comes with gasket, without pulley. (Part No: 173069)		$268.83
Water Pump - For: 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6506, 6600, 6800, 6900, 7600. Water Pump. Does not come with o-ring or pulley. Shaft extends.408 inches past the front hub. (Part No: 113447)		$111.90
Water Pump - For tractor models 7200, 7400. Water Pump. Comes with gasket, without pulley. (Part No: 113447)		$111.90
Water Pump - For model 5310. Water Pump, marked R67188. (Part No: 168204)		$190.90
Water Pump - For (4050, 4850 All with 6-466 eng)(4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4955, 4960). Water Pump. Casting # R71224 or R83561. Replaces: AR93571, RE23291, RE43131, 471224 CASTING #, R83561 CASTING #. (Part No: 122789)		$189.38
Water Pump - For 4050 with 6-359 eng. Water Pump. (Part No: 140581)$1025.00
Water Pump - For (4050, 4250, 4450, 4650, 4850 All with Cam Drive)(4055, 4255, 4455, 4555, 4560, 4760, 4960, 8450 All with 6-466AR Engine). Water Pump. Note: Casting numbers R71224, R23291, R83561. discontinued (Part No: 122789)		$189.38
Water Pump - For tractor models 5300, 5400 All with Oil Cooler Engine SN# 202232-248699) 5400N Engine SN# 202232-248699. Water Pump. Note: Marked R73604. Replaces RE61714. (Part No: 184774)		$335.00
Water Pump - For 6200, 6200L, 6300, 6300L, 6400, 6400L, 6400SP, 6500, 6500L, 7500, 7600. Water Pump. Comes with gasket, without pulley. Casting# R102846. Shaft is even with front hub (Part No: 113447)		$111.90
Water Pump - For tractor models 644G, 792DLC, 850C, 892ELC, 7700, 7800, 8100, 8200, 8300, 8570, 8870, 8970. (Part No: 114026)$148.00
Water Pump - For 820 and 830 2 cylinders, 80, 840. Comes with Pulley and Gasket. Replaces: AR1194R, Housing casting #: R1523R, Pulley casting #: R1526R, R1527R. Replaces AR1194R-R, AR1194R (Part No: 122068)		$120.80
Water Pump - This water pump with gaskets but without pulley is completely new, from the seal to the housing. Pulley is available as part number R47126. It fits John Deere: Forage Harvester 5200 (Eng. SN <335845), Forage Harvester 5400 (Eng. SN <335845), And Tractors 4320, 4520 (Eng. SN 303579>), 4620, 4840, 7020 (Eng. SN <335845). Replaces RE20024-R, AR49649, TY6758, R49655, SE500914, AR49655. Casting # R46561. Non threaded o-ring port is located at the top of the pump. (Part No: 114012)		$275.00
Water Pump - This new Water Pump comes with a gasket. It is used on 304J Indust Const, 324J Indust Const, 325 Skid Steer, 326D Skid Steer, 328 Skid Steer, 328D Skid Steer, 332 Skid Steer, 5065M, 5075M, 5225, 5325. It replaces RE507604, RE545573. (Part No: 149698)		$181.00
Water Pump - This is a new Water Pump with Gasket. It is used on many John Deere Models with Power Tech Plus 4.5L 6.8L, PWX 4.5L Engines. It replaces original part numbers RE523169, RE546918, SE502816 (Part No: 155754)		$109.01
Water Pump - This Water Pump, with Gasket is used on 4-239D and 4-239T engines on John Deere Models 310C, 310D, 315C and 315D all without Air Conditioning. Replaces pumps with casting numbers R70612, R90785. Replaces original part number RE16666 (Part No: 140637)		$560.00
Water Pump - This new water pump is used on Yanmar build John Deere Models: 770, 870, 970, 1070, 575 SKIDSTEER, 4300, 4400, 4500, 4600, 4310, 4410, 4510, 4610, 4710. Replaces AM881340, AM881419, M805843, MIA880461. DOES NOT INCLUDE MOUNTING GASKETS - NOT AVAILABLE FROM YESTERDAYS TRACTORS. (Part No: 164803)		$135.00
Water Pump - Water Pump, This water pump is completely new, from the seal to the housing. It fits multiple John Deere Industrial Construction and Skidder models. Marked: R80168. Replaces RE16655, RE27692, For 344G, 444G, 495D, 540E Engine SN# less than 383839, 544D, 548E Engine SN# under 383839, 590D, 595D, 624E, 624G, 640D, 640G Engine SN# before 701059, 643, 643, 643D, 648D, 648G Engine SN# under 701059. (Part No: 173428)		$648.90
Water Pump - This Water Pump is used on the following John Deere tractors: 9120, 9220, 9320, 9320T, 9420, 9420T, 9520, 9520T, 9620, 9620T. Replaces RE549153, RE530870, RE540308, RE545360 (Part No: 168575)		$450.00
Water Pump - For tractor models 3010, 3020, 4000, 4010, 4020 All Diesel without AC. Replaces casting numbers R26337, R27547, R34977, R34982, R41315, R41318, R44122. (Part No: 101903)		$84.20
Water Pump - For 3010, 3020, 4010, 4020, all Gas LP Less Air Conditioning. Water Pump. Replaces casting numbers: R44117, R34976, R34981, R41313, R41317, R44116, R44119. NOTE: THIS PUMP WILL WORK WITH A CAST PULLEY, IF YOU ARE USING A STAMPED STEEL PULLEY IT WILL RIDE DOWN TOO FAR ON THE SHAFT AND HIT THE HOUSING. THIS PROBLEM CAN BE SOLVED BY ORDERING A SPACER, PART# R52833. (Part No: 112094)		$102.00
Water Pump - For 4030 with Engine SN# 278123 and up. Replaces casting # R52009. (Part No: 113924)		$388.70
Water Pump - This water pump is for tractor models 2940, 2950, 3040, 3140. (Part No: 118483)		$285.00
Water Pump - Water pump less hub, pulley, and backing plate. For diesel engines. Tractors: 1140, 1640, 1840, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2750, 2755, 2855, 5500. Replaces John Deere casting numbers R70437, R78286, R100812, R122337, R127918, RE46238, RE24845, AR92417, RE15774, RE26955, RE26975, RE40151. (Part No: 101899)		$122.79
Water Pump - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. RE31600-R, R31600 Casting#s R99665, R70612, R90783 (Part No: 113446)		$255.00
Water Pump - For tractor models 450, 2510 Gas, 480A and 480B up to Serial Number 193099. Replaces AT29617-R, R29520. Casting# RT29520 Or T23629 (Part No: 118462)		$144.90
Water Pump - For 644B, 646, 646B. Water Pump. Replaces RE20772, AR98559, AR76327, AR64092, TY6736. (Part No: 173061)		$644.70
Water Pump - For model 5200 without Oil Cooler Engine SN# from 202232 to 248699. Water Pump replaces casting numbers R48997 and RE677186. (Part No: 184774)		$335.00
Water Pump - For 5200 over SN# 248700. Water Pump replaces casting #R67188. (Part No: 173078)		$325.00
Water Pump - For 5200, 5400, (6030, 7520, both with 6-531A engine). Pump replaces casting #R48818. (Part No: 122806)		$233.00
Water Pump - For 544B. Water Pump. Replaces JD# TY6737. (Part No: 164738)		$630.00
Water Pump - For tractor models JD690, JD690A, (4520 with SN# up to 303518).Casting #43114. (Part No: 173162)		$270.48
Water Pump - For JD700A, JD760, JD760A, (5010, 5020 both without Air Conditioning), 6030 with O Air Conditioning and with 60531 Diesel Engine. REMANUFACTURED Water Pump replacing Casting # R36812 (Part No: 121848)		$260.00
Water Pump - For tractor models 550, 550A, 550B, 555, 555A, 555B. Water Pump replaces JD#TY6734. (Part No: 163857)		$820.30
Water Pump - For tractor models 570, 570A, 570B, Cotton Picker 9900, Cotton Stripper 484. Water Pump replaces AR50273, AR52399, AR52421, AR78923, AT27890, AR50272, AT30223, AT27891, JD#TY6743. Does come with gasket. Does not come with pulley. (Part No: 164808)		$355.40
Water Pump - For 4040, 4230, both with Diesel Engines. Water Pump replaces Casting # R51683. Comes with gasket. Comes without pulley. (Part No: 101904)		$134.40
Water Pump - For tractor models 4430, 4630, 5200, 5400, 690B, 693B, 7020. Water Pump Replaces Casting # R50408. Comes with Gasket. Comes without pulley. (Part No: 101906)		$150.00
Water Pump - For tractor models 4240, 4350, 4440, 4455, 5720, 5730, 8430, 9940, (4640, 4840, 8440 all IF USED WITH ORIGINAL PULLEY). Water Pump replaces Casting numbers: R61439, RE10969, RE10970, R61437, AR98551, RE11496, RE11498, AR74498, AR84165, R98552. This water pump weighs 40 lbs. Includes gasket. Additional shipping due to weight. (Part No: 101905)$160.00
Water Pump - For tractor models 4050 with 6-359 Engine. Water Pump. (Part No: 140581)		$1025.00
Water Pump - For 340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 9400 with Engine SN# above 337246. Water Pump replaces AR68389, JD#TY6738, Casting #R90784. Comes with gasket and double pulley. (Part No: 165052)		$285.60
Water Pump - For 5400N with Engine SN# below 202231, (5300, 5400 both with oil cooler and Engine SN# below 202231). Replaces RE46813, RE51893. Casting # R110541 or R110542. Extremely early engine serial number machines may require hub change to install pulley. (Part No: 158621)		$295.00
Water Pump - For 5410, 5420, 5510, 5520. Water Pump. Comes with gasket, without pulley. (Part No: 113579)		$74.00
Water Pump - For 6110, 6210, 6310, 6410, 7210, 7410, 7510. Water Pump with original style metal impellor replaces RE500734. Comes with gasket, without pulley. (Part No: 113580)		$92.00
Water Pump - For tractor models 8100, 8200, 8300, 8400, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9960, (9500, 9600 both with SN# above 500000. Casting numbers RE39121 and RE49540. YTO RE39121-R (Part No: 114026)		$147.99
Water Pump - For tractor models 70, 720, 730. NOT FOR A MODEL 70D OR OTHER MODELS NOT LISTED. Includes gasket and single pulley. Fits 70 Serial number below 7031299 Gas and Diesel, 720 Gas and Diesel, 730 Gas and Diesel. Replaces AF2368R-R, R1052, F1052R. Note, if you do not have a bypass pipe on your water pump, you will need F2282R water bypass plug, not included. (Part No: 111171)		$114.00
Water Pump - For 80D, 820, 830, all 2 cylinder Diesels. Water Pump replaces casting #R1523R. Comes with gasket and pulley. (Part No: 122068)		$120.80
Water Pump - For 1010 gas. 1010 (Crawler - GAS SN 1001-21900), Rubber tired 1010 (GAS W Casting# T12034T). Comes with gasket and pulley. Casting # T12034T. Replaces AT12862, R12034 (Part No: 115519)		$200.00
Water Pump - For 1750, 1850, 2155 with SN# 743474 and up. Water Pump comes with gasket, without pulley. (Part No: 173057)		$470.00
Water Pump - For tractor models 1750, 1850, 1950, 1950N, 2355N. Water Pump comes with gasket, without pulley. (Part No: 165025)		$445.00
Water Pump - For tractor models 2280, 2420, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 400, 401, 440, 440A, 440B, 480, 70, 70D, (1020, 1520, 1530, 2030, 2440, 830, 930 all with Diesel Engines), 2020 DSC, (2040, 2240, both with Diesel seial number under 349999). Water Pump with gasket. Replaces casting numbers: R51039, R55758, AR67452, AR55094. Note: Can use T23628 Pulley. Will need to remove the hub first. Can be used in place of AR85250, AR87420, AR97708, AR97708 and RE19944 in some applications. Replaces: AR52423, AR55094, AR62548, AR65260, AR87420, AT29619, DE13243. (Part No: 101902)		$129.00
Water Pump - For GAS Models: JD300, JD301, JD380, JD400, JD401, JD440, JD440A, JD440B, JD480, 1020, 1520, 2020, 300B, 301A, all Gas. Water Pump. Replaces casting numbers R23631T, T23631T, AT21205. Comes with gasket, with backing plate and with pressed on pulley with threaded holes for fan. (Part No: 114081)		$221.00
Water Pump - This water pump assembly with tube is completely new, from the seal to the housing. It fits the John Deere Engine 4-276 (SN <366182 without turbo charger) and Tractor 2630 (used with thermostat housing marked R59051, R54808 or R54805) and 2640. (NOTE: replaces AR63343-R, AR71133, R55164) Water Pump. Replaces AR63343-R, AR71133, R55164. Comes with gasket and hub. If pulley is needs, the hub must be removed and T23628 must be put pressed on. R59050 Tube. This tube is only .73" long and requires thermostat housing hose R59052 not available from YT. (Part No: 109950)		$181.00
Water Pump - For tractor models JD350, JD350B, JD440, JD440A, JD440B, JD450, JD480A, JD480B, 210C, 310A, 310B, 400G, 401B, 401C, 401D, 410, 450C, 450D, 455D, 480C, 482C, 2510 Diesel, (2030, 2520, both with Gas). Replaces Casting #RT29521, R29521, R55164, T29521, AR65262, RE19717, AT26708, AT21204, AT29620, AT27019. Comes with gasket and pulley. (Part No: 107989)		$168.00
Water Pump - For Engine models 4-239, 4-276, 6-359, 6-414 all power engine. Water Pump replaces TY6735. Comes with gasket and double pulley. (Part No: 121957)		$305.00
Water Pump -
  • For John Deere tractor model 8560< li>
  • Compatible with John Deere Combine(s) 9500, 9600< li>
  • Replaces John Deere OEM number RE28368, RE43132, RE55986, RE55986-R, SE500911< li>
  • Replaces John Deere Casting number R83561< li>
  • Tooth Angle: .546"< li> < UL> (Part No: 122807)
$210.00
Water Pump - For B with SN# above B306600, 50 with SN# below 5016057, both with pulley width of 1 2". Water pump comes with pulley. (Part No: 111168)		$136.90
Water Pump - For tractor models 320, 330, 40, 420, 430, 440. Water Pump replaces casting #R3038T M3038T. Comes with gasket and pulley. (Part No: 121812)		$219.99
Water Pump - For tractor models 520, 530, 50 with SN# above 5016058. Water Pump with gasket and 3 8" Pulley Width. Replaces AB4761R and AB4881R. (Part No: 111169)		$134.70
Water Pump -
  • For John Deere tractor models 6610, 7200, 7710, 7810, 7820, 7920, 8100, 8100T, 8110, 8120T, 8200, 8200T, 8210, 8220T, 8300, 8300T, 8320, 8320T, 8400, 8420, 8420T, 8520T, 9100, 9120, 9200, 9300, 9400< li>
  • Compatible with John Deere Combine(s) CTSII, 2256, 2258, 2264, 2266, 9400, 9550, 9560 STS, 9610, 9640 WTS, 9650, 9650 STS, 9660 STS, 9660 WTS, 9750 STS, 9760 STS, 9780 CTS< li>
  • Compatible with John Deere Harvester(s) 9976, 9986, 9996< li>
  • Replaces John Deere OEM number RE521503< li>
  • Replaces Casting number R503501< li>
  • Engine: Power Tech 6081< li>
  • 15 Tooth Gear Drive< li> < UL> (Part No: 128029)
$177.90
Water Pump -
  • For John Deere tractor models 6145R, 6155M, 6155R, 6175M, 6175R, 6195M, 6195R, 6215R, 7210R, 7230R, 7250R, 7270R< li>
  • Compatible with John Deere Combine(s) T550, W540, W550< li>
  • Replaces John Deere OEM number RE557899< li> < UL> (Part No: 160563)
$124.00
Water Pump -
  • For John Deere tractor models 3150, 3640< li>
  • Replaces John Deere OEM number RE18676, R18676< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 163610)
$730.00
Water Pump -
  • For John Deere tractor model 2120< li>
  • Replaces John Deere OEM number R23632< li> < UL> (Part No: 165842)
$93.00
Water Pump -
  • For John Deere tractor models 9330, 9410R, 9420R, 9420RX, 9430, 9430T, 9460R, 9460RT, 9470R, 9470RT, 9470RX, 9510R, 9510RT, 9520R, 9520RT, 9520RX, 9530, 9530T, 9560R, 9560RT, 9570R, 9570RT, 9570RX, 9630, 9630T< li>
  • Compatible with John Deere Combine(s) S680, S680HM, S685, S685HM, S690, S690HM, S780, S790, 9870 STS< li>
  • Compatible with John Deere Harvester(s) CP690, 7350, 7380, 7450, 7480, 7550, 7580, 7750, 7760, 7780, 8300, 8400, 8500, 8600< li>
  • Compatible with John Deere Construction & industrial models 370E, 410E, 460E, 824K, 824KII, 844K, 844KII< li>
  • Replaces John Deere OEM number RE549117< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 168574)
$470.00
Water Pump -
  • For John Deere tractor model 5200 (s n 202231-earlier)< li>
  • Replaces John Deere OEM number RE51893, RE46813< li>
  • Replaces Casting number R110542< li>
  • Engines without Oil Cooler< li>
  • Includes Mounting Gasket< li> < UL> (Part No: 172380)
$144.90
Water Pump - For tractor models 4040, 4230. Replaces john deere casting number. (NOTE: replaces AR98549-R, R51683, SE500917, AR55961) Casting # R51683 (Part No: 101904)		$134.40
Water Pump - For tractor models 4430, 4630, 7020 SN# 335846 & up. Replaces john deere casting number R50408. (Part No: 101906)		$150.00
Water Pump, 1/2 in. pulley - For tractor models 60 with SN# below 6029999, AO, AR both with SN# above 281400, A with SN# above 700200. Water Pump comes with gasket and 1 2" Width Pulley. (Part No: 111166)		$175.00
Water Pump, 3/8 in. pulley - For A (SN# 7002000 & above), AO & AR (SN# 281400 & above), 620, 630, 60. Water Pump comes with 3 8" width Pulley. Comes with by-pass connection. Can be used with or without the by-pass connection. If by-pass is not used, plug can be ordered as part # F2282R. Replaces casting number R5318R. (Part No: 111167)		$133.00
Water Pump Bearing - For tractor models 3020, 4000, 4020. Used on the following water pump: AR45332. (Part No: 180675)		$16.50
Water Pump Bypass Hose -
  • For John Deere tractor models 8430 (1974-'81), 8440< li>
  • Replaces John Deere OEM number TY22437, R62891< li>
  • 2.375" I.D.< li>
  • 5.562" Long< li>
  • For Hose Clamp use Item #: 111917< li> < UL> (Part No: 159700)
$4.50
Water Pump Gasket - For AR65917 water pump. Price shown is for each, sold only in multiples of 2 items. (Part No: 153716)$1.30
Water Pump Gasket -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230< li>
  • Replaces John Deere OEM number R26331, R521480< li> < UL> (Part No: 149876)
$5.76
Water Pump Gasket -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7700, 7800, 8560, 8760, 8960< li>
  • Replaces John Deere OEM number R71361, R520707< li>
  • For water pump use 122789< li> < UL> (Part No: 153395)
$1.76
Water Pump Gasket -
  • For John Deere tractor models 4040, 4240, 4440, 4455 (Manufactured in Mexico), 4640, 4840, 8440, 8640< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9940< li>
  • Replaces John Deere OEM number R61437< li> < UL> (Part No: 154662)
$8.06
Water Pump Gasket -
  • For John Deere tractor models A (s n 700200-later), 60 (s n 6030000-later), 620, 630< li>
  • Replaces John Deere OEM number A4281R< li> < UL> (Part No: 154664)
$3.46
Water Pump Gasket -
  • For John Deere tractor models G, GH, GN, GW, 70, 70 (Diesel), 720 (Diesel), 730 (Diesel)< li>
  • Replaces John Deere OEM number F1053R< li> < UL> (Part No: 154665)
$2.30
Water Pump Gasket -
  • For John Deere tractor models 4320, 4520, 4620, 5200, 5400, 7020< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 644, 644A, 646, 646B, 690, 690A< li>
  • Replaces John Deere OEM number R43117< li> < UL> (Part No: 155351)
$3.90
Water Pump Gasket -
  • For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850, 2030, 2040, 2140, 2150, 2155, 2210, 2255, 2350, 2355, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2850, 2855< li>
  • Compatible with John Deere Construction & industrial models 210< li>
  • Compatible with John Deere Hay Cutting(s) 3430, 3830< li> < UL> (Part No: 155352)
$4.16
Water Pump Gasket - Backplate to Block -
  • For John Deere tractor models 6030, 7520, 8630, 8640, 8650< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5460, 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 644B, 646, 646B, 762, 770, 770A, 772A, 844, 850, 855, 862, 890, 990< li>
  • Replaces John Deere OEM number R49495, R520542< li> < UL> (Part No: 158305)
$2.30
Water Pump Gasket - Plate to block -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Replaces John Deere OEM number R26341< li> < UL> (Part No: 155349)
$2.90
Water Pump - Gasket Plate to Block -
  • For John Deere tractor models 4040, 4050, 4230, 4320, 4430, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 644, 644A, 690, 690A< li>
  • Replaces John Deere OEM number R42406< li> < UL> (Part No: 153399)
$2.20
Water Pump Gasket - Plate to Block -
  • For John Deere tractor models 40, 320, 330, 420, 430, 440< li>
  • Replaces John Deere OEM number M3047T< li> < UL> (Part No: 140650)
$5.76
Water Pump Gasket Plate to Block -
  • For John Deere tractor models 1010, 2010 (s n 42001-later)< li>
  • Replaces John Deere OEM number R98826, T10858< li>
  • Plate to Block< li>
  • For water pump use 108036< li> < UL> (Part No: 153387)
$3.46
Water Pump Gasket - Pump to Backplate -
  • For John Deere Construction & industrial models 310A, 310B, 410, 440, 440A, 440B< li>
  • Replaces John Deere OEM number R55406< li> < UL> (Part No: 149841)
$15.76
Water Pump Gasket - Pump to Backplate -
  • For John Deere tractor models 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 644A, 646, 646B, 690, 690A< li>
  • Replaces John Deere OEM number R42404< li> < UL> (Part No: 158304)
$5.76
Water Pump Gasket - Pump to Backplate -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 844, 990< li>
  • Replaces John Deere OEM number R99785, R67352< li> < UL> (Part No: 158306)
$15.26
Water Pump Gasket Pump to Backplate -
  • For John Deere tractor models 2510, 2520, 2630< li>
  • Compatible with John Deere Construction & industrial models 350, 401, 410, 440 (s n 50000-later), 440A (s n 50000-later), 450, 480< li>
  • Replaces John Deere OEM number T20242< li>
  • Water Pump to Backplate Gasket< li> < UL> (Part No: 155278)
$5.76
Water Pump Gasket - Pump to plate -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Replaces John Deere OEM number R26343< li> < UL> (Part No: 155350)
$2.90
Water Pump Gasket - Pump to Plate -
  • For John Deere tractor models 40, 320, 330, 420, 430, 440< li>
  • Replaces John Deere OEM number M3046T< li> < UL> (Part No: 140651)
$11.40
Water Pump Gasket Pump to Plate -
  • For John Deere tractor model 2010 (s n 42001-later)< li>
  • Replaces John Deere OEM number R98828, T12713, T26569< li>
  • Pump to Plate< li>
  • For water pump use 108036< li> < UL> (Part No: 153385)
$3.06
Water Pump Gasket Pump to Plate -
  • For John Deere tractor models 4040, 4230, 4430, 4630, 7020< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440< li>
  • Replaces John Deere OEM number R50410< li>
  • Pump to Plate< li>
  • For water pump use 101904, 101905, 101906< li> < UL> (Part No: 153398)
$4.10
Water Pump Gaskets - These Gaskets are used on multiple Diesel John Deere Models. Includes Water pump and backplate gasket. Replaces R97455, T20243 (Part No: 154747)		$3.36
Water Pump Housing Gasket - Used on many John Deere tractors and other equipment, this gasket replaces John Deere part number R56809 (Part No: 155353)		$3.56
Water Pump Hub -
  • For John Deere tractor models 4240 (6-466 diesel engine with OEM R61439), 4240S (6-466T diesel engine with OEM R61439), 4350 (6-466T diesel engine), 4430 (6-404T diesel engine with OEM R50408), 4440 (6-466T diesel engine with OEM R61439), 4630 (6-404 diesel engine with OEM R50405), 4640 (6-466 diesel engine with OEM R61439), 4840 (6-466 diesel engine with OEM R61439), 8440 (6-466 diesel engine with OEM R61439)< li>
  • Replaces John Deere OEM number R50408, R61439< li> < UL> (Part No: 177027)
$45.00
Water Pump Hub -
  • For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2130, 2155, 2240, 2355N, 2440, 2510, 2520, 2640, 5200, 5500, 5500N< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 301A, 302, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number R30720, R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, R97081< li>
  • Hub is only for following water pumps: R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, and R97081< li> < UL> (Part No: 177034)
$23.26
Water Pump Impellor - For tractor models 1020, 1120, 1520, 1530, 1640, 2020, 2040, 2040S, 2120, 2440, 2510, 2630, 2640, 3300, 5105, 5205, 5210, 5220, 5310, 5310N, 5320, 5320N, 820, 830, 8875, 920, (2240 SN# 350000 and up), (2140 SN# 430000 and up). (Part No: 123606)		$14.50
Water Pump Impellor - For water pump AR65917. For tractor models 550, 550A, 550B, 555, 555A, 555B. (Part No: 173174)$48.30
Water Pump Kit -
  • For John Deere tractor models 4040, 4230, 8430< li>
  • Replaces John Deere OEM number R934040< li> < UL> (Part No: 165803)
$37.50
Water Pump Kit without Impeller - Used on pumps marked with R27547, R34977, R34982, R26337. For tractor models 3010, 3020, 4010, 4020. (Part No: 173349)		$41.50
Water Pump Mounting Gasket -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7700, 7800, 8560, 8760, 8960< li>
  • Replaces John Deere OEM number R520580< li> < UL> (Part No: 153394)
$5.00
Water Pump - New - With Hub - Less Pulley For 820, 830, 1020, 1520, 1530, 2020, 2030 with 152 Diesel Engine. OEM# R55758 (Part No: 101902)$129.00
Water Pump - New - With Hub - Less Pulley For 4240, 4350, 4440, 4455, 4640, 4840, 8430, 8440, with Diesel Engine. OEM# R61439 (Part No: 101905)$160.00
Water Pump Plug - Plug for AA6327R or AF2368R to plug off by pass tube when not needed. (Part No: 179547)		$15.00
Water Pump Pulley - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. (Part No: 150383)		$43.00
Water Pump Pulley - This Water Pump Pulley is used with RE20024 Water Pump. It replaces original part number R47126. (Part No: 151918)		$171.00
Water Pump Pulley - The measurements on this pulley are 1.506 inches inside diameter, 8.375 inches outside diameter, and 3.27 inches thick. It has two grooves. This pump is used with RE20023 Water Pump on John Deere models: 4240, 4240S, 4350, 4430, 4440, 4455, 4630, 7020, 5200, 5400, 5440, 690B, 693B (Part No: 151073)		$61.00
Water Pump Pulley -
  • For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2350, 2550, 2750< li>
  • Replaces John Deere OEM number R70442< li>
  • Single Groove< li> < UL> (Part No: 108752)
$114.80
Water Pump Pulley -
  • For John Deere tractor models 4640, 4840< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 9940< li>
  • Replaces John Deere OEM number R61436< li> < UL> (Part No: 140615)
$176.70
Water Pump Pulley -
  • For John Deere tractor models 2155 (s n 751023-earlier), 5500 (s n 248699-earlier)< li>
  • Replaces John Deere OEM number R85004< li> < UL> (Part No: 154291)
$122.00
Water Pump Pulley -
  • For John Deere tractor model 4030< li>
  • Replaces John Deere OEM number R52011< li> < UL> (Part No: 156641)
$155.00
Water Pump Pulley -
  • For John Deere tractor models 3150, 3640< li>
  • Replaces John Deere OEM number R80983< li> < UL> (Part No: 169349)
$132.60
Water Pump Pulley -
  • For John Deere tractor models 2630, 2640< li>
  • Replaces John Deere OEM number T26850< li>
  • Type: Press on< li> < UL> (Part No: 173817)
$49.70
Water Pump Pulley -
  • For John Deere tractor models 2940, 2950< li>
  • Replaces John Deere OEM number R70444< li> < UL> (Part No: 176701)
$187.00
Water Pump Pulley Spacer -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230< li>
  • Replaces John Deere OEM number R52833 < li>
  • Used with stamped steel pulley on water pump 112094 to gain housing to pulley clearance< li>
  • Thickness: 0.135"< li>
  • ID: 3.234"< li>
  • Bolt Holes: 7 16"< li> < UL> (Part No: 160479)
$11.80
Water Pump, Remanufactured, AA6327R -
  • For John Deere tractor models 60 (s n 6054500-later), 620, 630< li>
  • Replaces John Deere OEM number AA6327R< li>
  • Replaces John Deere Casting number A5318< li>
  • Casting No. A5318< li>
  • Pulley: A4898 3 8" width< li>
  • Includes mounting gasket< li>
  • With pulley< li>
  • For a New version of this sku use Item #: 154664< li> < UL> (Part No: 204223)
$98.01
Water Pump, Remanufactured, AF1733R, F1052 -
  • For John Deere tractor model 70 (gas s n 7008100-7031299)< li>
  • Replaces John Deere OEM number AF1733R< li>
  • Replaces John Deere Casting number F1052< li>
  • Casting No. F1052< li>
  • Pulley: A4898 3 8" width< li>
  • Includes pulley and mounting gasket< li>
  • For Replacement Gasket use Item #: 154665< li> < UL> (Part No: 204438)
$94.01
Water Pump, Remanufactured, AF2297R, AF2368R -
  • For John Deere tractor models 70 (gas s n 7031300-later), 720, 730 (both gas diesel)< li>
  • Replaces John Deere OEM number AF2297R, AF2368R< li>
  • Replaces John Deere Casting number F2244< li>
  • Casting No. F2244< li>
  • Pulley: A4898 3 8" width< li>
  • Includes pulley and mounting gasket< li>
  • For a New version of this sku use Item #: 154665< li> < UL> (Part No: 205131)
$91.01
Water Pump, Remanufactured, AF2347R, F2340 -
  • For John Deere tractor model 70 (diesel s n 7031300-later)< li>
  • Replaces John Deere OEM number AF2347R< li>
  • Replaces John Deere Casting number F2340< li>
  • Casting No. F2340< li>
  • Pulley: A4898 3 8" width< li>
  • Includes mounting gasket< li>
  • With pulley< li>
  • For Replacement Gasket use Item #: 154665< li> < UL> (Part No: 206132)
$109.01
Water Pump, Remanufactured, AR27931 -
  • For John Deere tractor models 3010 (diesel), 3020 (diesel)< li>
  • Replaces John Deere OEM number AR27931, AR27933, AR31895, AR45332< li>
  • Replaces Casting number R26337< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate< li>
  • Includes backplate to block gasket< li>
  • With Hub< li>
  • For a new version of this sku use Item #: 155349< li> < UL> (Part No: 205899)
$118.01
Water Pump, Remanufactured, AR27933 -
  • For John Deere tractor models 3010 (diesel), 3020 (diesel)< li>
  • Replaces John Deere OEM number AR27933, AR31895, AR40923, AR44379, AR45332< li>
  • Replaces Casting number R27547< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate< li>
  • Includes backplate to block gasket< li>
  • With Hub< li>
  • For a new version of this sku use Item #: 155349< li> < UL> (Part No: 205900)
$104.01
Water Pump, Remanufactured, AR36667 -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 700< li>
  • Replaces John Deere OEM number AR36667< li>
  • Replaces John Deere Casting number R36812< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate to block gasket< li> < UL> (Part No: 205925)
$139.01
Water Pump, Remanufactured, AR43746, R43114 -
  • For John Deere tractor model 4520< li>
  • Replaces John Deere OEM number AR43746< li>
  • Replaces John Deere Casting number R43114< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate to block gasket< li>
  • For repair kit use Item #: 166279< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205916)
$135.01
Water Pump, Remanufactured, AR45332 -
  • For John Deere tractor models 3020 (diesel), 4010 (diesel), 4020 (diesel)< li>
  • Replaces John Deere OEM number AR45332< li>
  • Replaces Casting number R34977< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate < li>
  • Includes backplate to block gasket< li>
  • With hub< li>
  • For a new version of this sku use Item #: 155349< li> < UL> (Part No: 205907)
$123.01
Water Pump, Remanufactured, AR45332, R34982 -
  • For John Deere tractor models 3020, 4000, 4010, 4020 (all diesel)< li>
  • Replaces John Deere OEM number AR45332< li>
  • Replaces John Deere Casting number R34982, R26337, R34977, R41315, R41318, R44122< li>
  • Includes mounting gasket< li>
  • For a new version of this sku use Item #: 155349< li> < UL> (Part No: 204225)
$124.01
Water Pump, Remanufactured, AR55961, R51683 -
  • For John Deere tractor models 4040, 4230< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number AR55961, AR98549, SE500917, TY6759< li>
  • Replaces John Deere Casting number R51683< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate< li>
  • Includes backplate to block gasket< li>
  • With hub< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205913)
$198.01
Water Pump, Remanufactured, AR65965, R55971 -
  • For John Deere Construction & industrial model 544B< li>
  • Replaces John Deere OEM number AR65965, R55971< li>
  • For a New version of this sku use Item #: 164738< li> < UL> (Part No: 210536)
$430.01
Water Pump, Remanufactured, AR92416, R78286 -
  • For John Deere tractor models 840, 940, 1040, 1640, 1840, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2850, 2855, 5500< li>
  • Replaces John Deere OEM number AR92416, AR92417< li>
  • Replaces John Deere Casting number R78286, R100812, R70434, R70437< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate to block gasket< li>
  • Without backplate, hub or pulley< li>
  • For replacement plate to block gasket use Item #: 155352< li> < UL> (Part No: 205934)
$152.01
Water Pump, Remanufactured, AT11918, T12712 -
  • For John Deere tractor models 1010, 2010< li>
  • Replaces John Deere OEM number AT11918, R12712< li>
  • Replaces John Deere Casting number T12712< li>
  • Includes mounting gasket< li>
  • With Pulley< li> < UL> (Part No: 205891)
$134.01
Water Pump, Remanufactured, R124057 -
  • For John Deere Construction & industrial models 762, 890< li>
  • Replaces John Deere Casting number R124057< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 210282)
$199.01
Water Pump, Remanufactured, R26326 -
  • For John Deere tractor models 3010, 3020< li>
  • Replaces John Deere Casting number R26326< li>
  • Includes pump to backplate gasket< li>
  • With Hub< li>
  • Without backplate< li> < UL> (Part No: 205898)
$107.01
Water Pump, Remanufactured, R34979, R41316 -
  • For John Deere tractor models 4000, 4020< li>
  • Replaces John Deere Casting number R34979, R41316< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate< li>
  • Includes backplate to block gasket< li>
  • With pulley< li> < UL> (Part No: 205911)
$77.01
Water Pump, Remanufactured, R34982 -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Replaces John Deere Casting number R34982< li>
  • Includes mounting gasket< li> < UL> (Part No: 205904)
$135.01
Water Pump, Remanufactured, R41317 -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Replaces John Deere Casting number R41317< li>
  • Includes mounting gasket< li>
  • For a New version of this sku use Item #: 112094< li> < UL> (Part No: 205905)
$118.00
Water Pump, Remanufactured, R41318 -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Replaces John Deere Casting number R41318< li>
  • Includes mounting gasket< li> < UL> (Part No: 205906)
$121.01
Water Pump, Remanufactured, R45332, R44122 -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020< li>
  • Replaces John Deere OEM number R45332< li>
  • Replaces John Deere Casting number R44122< li>
  • Includes pump to backplate gasket< li>
  • Includes backplate< li>
  • Includes backplate to block gasket< li>
  • With Hub< li> < UL> (Part No: 205901)
$124.01
Water Pump, Remanufactured, R519020, RE549117 -
  • For John Deere tractor models 9330, 9430, 9530, 9630< li>
  • Replaces John Deere Casting number R519020< li>
  • Replaces John Deere OEM number RE549117, SE501593< li>
  • 19 tooth gear< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 210770)
$264.01
Water Pump, Remanufactured, RE15548, R72748 -
  • For John Deere Construction & industrial model 750 (Crawler)< li>
  • Compatible with John Deere Engine(s) 6414< li>
  • Replaces John Deere OEM number RE15548< li>
  • Replaces John Deere Casting number R72748< li>
  • 4-Groove Pulley< li> < UL> (Part No: 210527)
$298.01
Water Pump, Remanufactured, RE20022 -
  • For John Deere tractor models 4040, 4240, 4350, 4440, 4455, 4620, 4640 (if hub is taken off and replaced with pulley), 4840 (if hub is taken off and replaced with pulley), 7020, 8430, 8440 (if hub is taken off and replaced with pulley), 8640< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9940< li>
  • Replaces John Deere OEM number RE20022, R58713, R61440, RE524413, TY6758, AR74498, AR84165, AR98551, AR98552< li>
  • Replaces Casting number R61437, R61439, R98552, RE10969, RE10970, RE11496, RE11498< li>
  • For a New version of this sku use Item #: 101905< li> < UL> (Part No: 210333)
$157.01
Water Pump, Remanufactured, RE20023, R50408 -
  • For John Deere tractor models 4430, 4630, 7020 (s n 335846-later)< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 690B, 693B< li>
  • Replaces John Deere OEM number RE20023, AR54578, AR98547, SE500915, TY6742< li>
  • Replaces Casting number R50408< li>
  • Includes hub & backplate, less pulley< li>
  • For a New version of this sku use Item #: 101906< li> < UL> (Part No: 204230)
$166.01
Water Pump, Remanufactured, RE41157, R102846 -
  • For John Deere tractor models 6200, 6300, 6400, 6500, 7200, 7400, 7600< li>
  • Replaces John Deere OEM number RE41157, RE44125, RE53757< li>
  • Replaces John Deere Casting number R102846< li>
  • Includes Mounting O-Ring< li>
  • With hub< li> < UL> (Part No: 205926)
$173.01
Water Pump, Remanufactured, RE61715, R79172 -
  • For John Deere tractor models 1630, 2030, 2155, 2355, 5045, 5055, 5065, 5075, 5103, 5105, 5203, 5205, 5210, 5220, 5300 (s n 202232-248699), 5303, 5310, 5320, 5400 (s n 202232-248699), 5403, 5410, 5510< li>
  • Replaces John Deere OEM number RE61715< li>
  • Replaces John Deere Casting number R79172, R48997, R55758, R62154, R65880, R67188, R73601, R73604, R76977, R77012< li>
  • Includes pump to backplate gasket - 154747< li>
  • Includes backplate to block gasket - 153716< li>
  • Without hub, pulley or backplate< li> < UL> (Part No: 205893)
$147.01
Water Pump Repair Kit - For tractor models 3030, 3120, 3130 all with either 6329D or 6303D engines. Replaces RE37484. (Part No: 155401)$62.00
Water Pump Repair Kit - The Water Pump Repair Kit is used to repair a RE19944 water pump. The RE19944 water pump is used on many John Deere pieces of equipment. Replaces RE37483, RE11345, RE62658 (Part No: 128473)		$40.26
Water Pump Repair Kit - This water pump rebuild kit comes with new shaft, bushing, gasket and seal. Kit does not come with impellor. For model 2840, 3030, 3130. (Part No: 173314)		$44.50
Water Pump Repair Kit - This Water Pump Repair Kit is use on water pumps with casting numbers: R55971, R56813, R70612, R78287, R90783, R90784, R97564, R99665, R104648, R120869. It replaces RE70143, RE62660, RE11348. (Part No: 167446)		$112.90
Water Pump Repair Kit - For 940, 1040, 1140, 1640, 1850, 2040, 2140, 1350, 1530, 1750, 1850, 2150, 2250, 2350, 2450, 2550, 2650, 2750, 2850, 2155, 2255, 2355, 2555, 2755, 2855. Water Pump Repair Kit. Repairs AR92418 marked R70437. Replaces RE11345, RE37483, RE62659, RE11347, MX9448, VPE2023 (Part No: 174102)		$48.60
Water Pump Repair Kit - For 3020 SN# 123000 and up, 4000 & 4020 SN# 201000 and up. New water pump repair kit WITHOUT impeller that fits multiple John Deere Tractor or Combine models. This repair kit is for water pumps marked R44122, R41318, R41315. Please verify OEM part number BEFORE ordering. (Part No: WPK664)$37.66
Water Pump Repair Kit -
  • For John Deere tractor models 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere OEM number R937020, R43117, AR101549, JD9257, R42406< li>
  • Kit Includes: 2 Gaskets, Spring Seal and Bearing< li> < UL> (Part No: 166279)
$51.00
Water Pump Repair Kit -
  • For John Deere tractor models SE6100 (European), SE6200 (European), SE6300 (European), SE6400 (European), 6100 (European), 6200, 6200L, 6300, 6300L, 6400, 6400L, 6400SP (Mexican), 6500, 6500L, 6506 (European), 6600 (European), 6800 (European), 6900 (European), 7200, 7220, 7320, 7400, 7500, 7600< li>
  • Replaces John Deere OEM number RE57722, RE53757, RE41157< li> < UL> (Part No: 173157)
$84.72
Water Pump Repair Kit -
  • For John Deere tractor models 2940 (Diesel Engine), 2950 (Diesel Engine), 2955 (Diesel Engine), 3055, 3155 (Diesel Engine), 3255, 4050 (Diesel Engine)< li>
  • Compatible with John Deere Combine(s) 9400< li>
  • Compatible with John Deere Construction & industrial models 340D, 440C, 440D, 448D, 540B, 540D, 548D, 640< li>
  • Replaces John Deere OEM number R99665, R70612R, R78287, R90783, R90784< li>
  • Kit Contains: Impeller, Bearings, Gaskets, Seal and 1" Shaft< li> < UL> (Part No: 176766)
$112.00
Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. (Part No: 164008)		$8.86
Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 450, 450B, 450C, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490E, 495D, 500, 500A, 500B, 500C, 510, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540E, 540G, 548D, 548E, 548G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 550, 550A, 550B, 555, 555A, 555B, 570, 570A, 570B, 590D, 595, 595D and 610B. (Part No: 164008)		$8.86
Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For models 610C, 624G, 640, 640E, 640G, 644A, 644C, 646, 646B, 646C, 648E, 648G, 655, 655B, 670, 670B, 672B, 690, 690A, 690B, 690ELC, 710B, 710C, 710D, 740, 740A, 740E, 740G, 748E, 750, 750B, 750C, 755, 755A, 755B, 762A, 762B, 790ELC, 850C, 1020, 1520, 1530, 2020, 2030, 2280, 2360, 2420, 2510, 2520, 2630, 3010, 3020. (Part No: 164008)		$8.86
Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 3300, 3430, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4400, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5103, 5105, 5200, 5203, 5205, 5210, 5303, 5310, 5310N, 5320, 5320N, 5400, 5403, 5410, 5420N, 5440, 5460, 5510, 5510N, 5520, 5520N, 5720, 6100, 6500, 6600, 7020, 7445, 7450, 8430, 8440, 8640 and 9400. (Part No: 164008)		$8.86
Water Pump Seal Kit -
  • For John Deere tractor models 1020, 1120, 3010, 3020, 4000, 4010, 4020, 4230< li>
  • Compatible with John Deere Combine(s) 925, 935, 945, 955, 965, 965 (H), 968 (H), 975, 975 (HY4), 985, 985 (HY4), 1032, 1042, 1052, 1055, 1065, 1068 (H), 1072, 1075, 1075 (H4), 1085, 1085 (H4), 1177, 3300, 4400, 4420, 4425, 6600, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Replaces John Deere OEM number AR62933, AR41691< li> < UL> (Part No: 164007)
$8.06
Water Pump Shaft Bearing -
  • For John Deere tractor models 2940, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7400, 7500, 7600< li>
  • Compatible with John Deere Combine(s) 975, 985, 1065, 1072, 1075, 4425, 9400< li>
  • Compatible with John Deere Harvester(s) 484, 7440, 7445, 9910, 9920, 9930< li>
  • Compatible with John Deere Construction & industrial models 300D, 310C, 310D, 315C, 340D, 344E, 440C, 440D, 444, 444E, 448D, 450G, 455G, 490E, 540, 540A, 540B, 540D, 544, 544A, 544B, 548D, 550, 550A, 550B, 550G, 555, 555B, 555G, 640, 650G, 670, 670A, 670B, 672A, 672B, 690D, 690ELC, 693D, 790ELC< li>
  • Replaces John Deere OEM number JD8643< li>
  • Shaft Size: 1"< li>
  • Outside Diameter: 1.875"< li>
  • Width Race: 2.750"< li>
  • Length: 7.130"< li> < UL> (Part No: 164009)
$56.00
Water Pump with Gasket - The New Water Pump comes with gaskets. It is used on John Deere Compact Tractor models: 4115, 4200, 4210, 655, 755, 756, 790, 855, 856. Also used on Fairway Mower models: 3215, 3215A, 3215B, 3235 and Riding Mower models: F1145, 1445, 1545. Replaces MIA880036, AM875326, AM878192 (Part No: 164470)		$157.00
Water Pump with Gasket - Used on Yanmar built John Deere compact equipment, this water pump with gasket replaces Y129001-42004, AM881819. This pump is used on 3032E, 3036E, 3038E compact tractors as well as excavators: 27D, 35D, 50D, and fairway mowers 1905, 3225C, 3235C, 1505, 1515 (Part No: 149877)		$250.00
Water Pump, with Hub ang Gaskets - For tractor models 310A, 310B, (410 serial number 169346 and up), (440, 440A, 440B serial number 169405 and up). With casting number R55130. (Part No: 108436)		$189.00
Water Pump, with out Cooler Tubes - For tractor models 2030 gas, 210C, 2510 diesel, 2520 gas, (310A, 310B, diesel), 400G, 401B, 401C diesel, 401D, 410 diesel, 450C, 450D, 455D, 480C diesel, 482C, 350, (350B, 440, 440A, 440B all diesel), 450, 450B, 480A, 480B. (Part No: 173137)		$155.30
Water Pump - Without Hub -
  • For John Deere tractor models 4640, 4840, 8440< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 9940< li>
  • Compatible with John Deere Engine(s) 6466A (check casting number prior to ordering), 6466D (check casting number prior to ordering), 6466T (check casting number prior to ordering)< li>
  • Replaces John Deere OEM number R61439, AR98552, RE10969, RE20022, SE500916< li>
  • Replaces John Deere Casting number R61439< li>
  • Without Hub< li>
  • Includes Mounting Gasket< li> < UL> (Part No: 177018)
$225.00
Water Pump - without pulley - For tractor models 850, 950, 1050. Comes with Water Pump to Back Plate gasket. CH10420 (Back-Plate-to-Head Gasket) sold separately. Pulley available as CH10491. Hub is a 2 inch diameter. Replaces CH10678, CH12859 121250-42011, 721252-42700, 72150-42700 (Part No: 113454)		$67.00
Water Pump with Pulley - For model : 70 SN# 7031300 and up. (Part No: 173071)		$125.00
Water Pump with Pulley - This is a new water pump with pulley. Does not include back plate or gasket. Additional pipe work may be required on early models. Replaces AR85250, AR45332. (Part No: 184840)		$120.76
Water Pump with Pulley - Used on John Deere 1020, 1030, 1120, 1130, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035, 2035EF, 2120, 2130, 2135, 310, 4239D, 830, 920, 925, 930, 932, 935, 940, 942, 945 952, 70, 70D, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 380, 400, 401, 440, 440A, 440B, 480. This water pump has a single groove pulley. Comes with gaskets and fitting. Replaces John Deere part numbers AR55094, AT27018, AT29619, casting numbers R48997, R54051, R55758, R65880, R67188. Hardware is not included to plug oil cooler lines. (Part No: 150365)		$144.00
Wire Hose Clamp - 2-13/32" to 2-17/32" -
  • For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 520, 530< li>
  • Replaces John Deere OEM number B78R< li>
  • 2-13 32" - 2-17 32" (60mm -64mm)< li>
  • Ideal for 2-1 2" O.D. hose< li> < UL> (Part No: 130433)
$8.06
Wire Hose Clamp - 2-1/8" to 2-9/32" -
  • For John Deere tractor model R< li>
  • Replaces John Deere OEM number H141R< li>
  • 2-1 8" - 2-9 32" (53mm - 57mm)< li>
  • Ideal for 2-1 4" O.D. hose< li> < UL> (Part No: 130432)
$6.99
Wire Hose Clamp - 3-13/16" to 4-1/16" -
  • For John Deere tractor models G, GH, GN, GW< li>
  • Replaces John Deere OEM number F90R< li>
  • 3-13 16" - 4-1 16" (97mm - 103mm)< li>
  • Ideal for 4" O.D. hose< li> < UL> (Part No: 130435)
$7.79
Wire Hose Clamp - 3" to 3-9/32" -
  • For John Deere tractor models A, B, BN, BNH, BW, BWH, 60, 620, 630< li>
  • Replaces John Deere OEM number A448R, B1813R< li>
  • 3" - 3-9 32" (76mm - 84mm)< li>
  • Ideal for 3-1 4" O.D. hose< li> < UL> (Part No: 130434)
$9.36
 
Decals and Emblems
1120 Hood Decal -
  • For John Deere tractor model 1120< li>
  • Replaces John Deere OEM number JD1120< li> < UL> (Part No: 164852)
$43.90
1130 Hood Decal -
  • For John Deere tractor model 1130 (Late Model)< li>
  • Replaces John Deere OEM number JD1130, L33424 LH, L33423 RH< li> < UL> (Part No: 164853)
$77.00
1140 Hood Decal -
  • For John Deere tractor model 1140< li>
  • Replaces John Deere OEM number JD1140, L65453 LH, L63977 LH, L35065 LH, L35062 RH, L65453 RH, L63977 RH< li> < UL> (Part No: 164854)
$65.36
1630 Hood Decal -
  • For John Deere tractor model 1630< li>
  • Replaces John Deere OEM number JD1630, L33427 RH, L33428 LH< li> < UL> (Part No: 164856)
$77.70
1640 Hood Decal -
  • For John Deere tractor model 1640< li>
  • Replaces John Deere OEM number JD1640, L35074 RH, L35073 LH, L65454 LH, L65454 RH< li> < UL> (Part No: 164857)
$65.72
2140 Hood Decal -
  • For John Deere tractor model 2140< li>
  • Replaces John Deere OEM number JD2140< li> < UL> (Part No: 164863)
$81.90
2155 Hood Decal -
  • For John Deere tractor model 2155< li>
  • Replaces John Deere OEM number JD2155< li> < UL> (Part No: 164866)
$86.00
2240 Hood Decal -
  • For John Deere tractor model 2240 (Early Model)< li>
  • Replaces John Deere OEM number JD2240E< li> < UL> (Part No: 164867)
$88.20
2640 Hood Decal -
  • For John Deere tractor model 2640 (Early Model)< li>
  • Replaces John Deere OEM number JD2640E< li> < UL> (Part No: 164872)
$89.00
2750 Hood Decal -
  • For John Deere tractor model 2750< li>
  • Replaces John Deere OEM number JD2750< li> < UL> (Part No: 164873)
$70.00
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1 2" x 4" black & silver, vinyl cut. (Part No: 183241)		$7.70
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1 2", black & yellow, vinyl cut (Part No: 183237)		$34.00
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: 183582)$13.00
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: 183188)		$13.00
2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: 183225)		$28.50
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: 183579)$13.00
3040 Hood Decal -
  • For John Deere tractor model 3040< li>
  • Replaces John Deere OEM number JD3040< li> < UL> (Part No: 164878)
$78.80
4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: 183248)		$35.00
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: 183604)$35.00
770 Hood Decal -
  • For John Deere tractor model 770< li>
  • Replaces John Deere OEM number JD400< li> < UL> (Part No: 164887)
$44.26
Be Careful Plate - This Be Careful Plate is used on John Deere Tractors, 1961-1972. (Part No: 184329)		$13.76
Be Careful Plate - This plate is used on A, AN, (AW serial number 584000 and up), B, BN, (BW serial number 201000 and up), G, GM, (GN serial number 26000 and up), GW, R, 50, 520, 60, 620, 70, 720, 80, 820 2 cylinder. (Part No: 109913)		$10.99
Be Careful Plate - This Plate is used one 530, 630, 730, 830 2 cylinder (Part No: 109935)		$12.99
Decal Set - Hood only decal set for Early model 4640. The Early model has solid yellow stripes. (Part No: 183336)$55.00
Decal Set - This decal set is for the model 2940 early. It is the yellow stripe. Hood Decal Set only. (Part No: 183628)$46.00
Decal Set - COMPLETE Decal Set for John Deere Model 2010. Set comes with Diesel decal for diesel tractors or do not use for gas tractors. Actual 2010 Diesel hood decal is vinyl cut (this part of picture has been modified to show decal). (Part No: 164858)		$62.00
Decal Set - For John Deere 420. Licensed John Deere product. This decal set has GREEN Letters Numbers. This is a self adhesive, 12 piece set. It is printed on Mylar, not die-cut. (Part No: 182590)		$43.76
Decal Set - For model 320. Set of 13 self adhesive decals. Not OEM. These new replacement decals for old-style tractors are a fine decorative, descriptive replacement part for vintage tractors and are sold solely for that use. With these historically authentic decals your old tractor will look its best. These non OEM decals are sold entirely independently of the original equipment manufacturer. Trade marks and trade names contained and used herein are those of others, and are used in a descriptive sense to refer to products of others. Printed on Mylar, not die cut. (Part No: 102376)		$35.50
Decal Set - For model 60. This is a set of 12 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 182759)		$43.76
Decal Set - For model 40. This is a set of 10 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 182756)		$43.76
Decal Set - For model M. This is a set of 12 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 102366)		$42.95
Decal Set - For model 730 Gas only. This is a set of 15 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 183355)		$48.50
Decal Set - For model B (1923-1938). This is a set of 12 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 183159)		$43.76
Decal Set - For model A (1947-1952). This is a set of 14 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 182630)		$43.76
Decal Set - For model A (1939-1946). This is a set of 12 self adhesive decals. Licensed by John Deere. DOES NOT INCLUDE THE "WARNING" DECAL AS PICTURED. This was not used on this model. These are printed on Mylar, not die cut. (Part No: 183155)		$43.76
Decal Set - For model A (1934-1938). This is a set of 10 self adhesive decals. These are printed on Mylar, not die cut. Licensed by John Deere. (Part No: 182629)		$43.76
Decal Set - For model B (1947-1952). This is a set of 14 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 182634)$43.76
Decal Set - For model B (1939-1946). This is a set of 12 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 183156)$39.50
Decal Set - For model G (1938-1946). This is a set of 12 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Part No: 185166)$43.00
Decal Set - For model 630 Gas. This is a set of 16 self-adhesive decals. These are printed on Mylar, not die cut. (Part No: 183365)		$57.00
Decal Set -
  • For John Deere tractor model 4010< li> < UL> (Part No: 102342)
$73.00
Decal Set - Decal Set for John Deere Model # 720 Diesel, 15pc. (Part No: 183702)		$50.67
Decal Set - Decal Set for John Deere Model 820(2-cyl) Diesel, 15pc. (Part No: 183708)$48.50
Decal Set - Complete set for John Deere Model 830(2-cyl) Diesel, 22pc. (Part No: 183061)$52.51
Decal Set - COMPLETE Decal Set for John Deere Model 4010. (Part No: 183081)$45.50
Decal Set - COMPLETE Decal Set for John Deere Model 4020. Does not include Syncro-Range or Powershift decals, See Item AR52393. (Part No: 164905)		$63.00
Decal Set - Hood only set for John Deere Model 820(3-cyl) Diesel. (Part No: 164933)$48.76
Decal Set - HOOD ONLY Decal Set for John Deere Model 830(3-cyl) Diesel. (Part No: 164935)$48.50
Decal Set - Hood only set for Model 850. (Part No: 183495)$43.50
Decal Set - Hood only set for Model 950. (Part No: 164936)		$48.76
Decal Set - Decal Set for John Deere Model 1010. Printed on Mylar. (Part No: 164939)		$62.00
Decal Set - Hood ONLY Decal Set for John Deere Model 1020. Printed on mylar. This set covers both sides of the hood. (Part No: 155141)$51.00
Decal Set - Hood only set for Model 2020. (Part No: 164859)$39.00
Decal Set - HOOD ONLY Decal Set for John Deere Model 2030 up to serial # 187300. (Part No: 164861)$52.00
Decal Set - Decal Set, HOOD ONLY, for John Deere Model 2030, Serial # 187301 and up. (Part No: 164860)$89.00
Decal Set - Hood Only Decal Set for John Deere Model 2040, up to Serial # 349999. Solid Yellow Stripe. (Part No: 183396)$42.76
Decal Set - HOOD ONLY Decal Set for John Deere Model 2040, for serial # 350000 and above. (Part No: 183395)$49.26
Decal Set - Hood only set for 2120. (Part No: 164888)$47.00
Decal Set - Hood only set for Model 2130 up to Serial # 181605. (Part No: 164862)$47.00
Decal Set - Hood Only Decal Set for John Deere Model 2130 Serial # 181606 and up. (Part No: R3755)$37.01
Decal Set - Hood only set for Model 2140 with solid yellow stripe. (Part No: R3756)$43.20
Decal Set - Hood only set for Model 2140 "Tiger Paw" stripe . (Part No: 183669)$60.00
Decal Set - HOOD ONLY Decal Set for John Deere Model 2150 Early only. (Part No: 164892)$82.00
Decal Set - HOOD ONLY Decal Set for John Deere Model 2150 Late only. (Part No: R3759)$49.96
Decal Set - Hood only set for Model 2240 up to Serial # 349999. (Part No: R3761)$43.20
Decal Set - Hood only set for Model 2240 with serial # 350000 and up. (Part No: R3762)$49.96
Decal Set - Complete set for Model 3010. (Part No: 164898)$68.00
Decal Set - COMPLETE Decal Set for John Deere Model 3020. For Gas and Diesel. Includes "Diesel" decal. Not for Hydro Transmission. The numbers are dye cut vinyl. (Part No: 164900)$32.10
Decal Set - Hood only set for Model 2040S. (Part No: 183667)$60.00
Decal Set - Decal Set for John Deere Model AO Unstyled only. (Part No: 183709)		$43.76
Decal Set - Complete set for Model AO Styled only. (Part No: 183518)$43.76
Decal Set - Decal Set for John Deere Model AR unstyled only. (Part No: 183711)		$43.76
Decal Set - Decal Set for John Deere Model AR Styled only. (Part No: 183710)		$43.76
Decal Set - Complete set for Model BO Unstyled. (Part No: 183523)$43.76
Decal Set - Decal Set for John Deere Model BR Unstyled only. (Part No: 102358)		$40.80
Decal Set - Decal Set for John Deere Model BR Styled only. (Part No: 183558)		$43.76
Decal Set - Decal Set for John Deere Model H. (Part No: 183514)		$43.76
Decal Set - Decal Set for John Deere Model LA. Not Die-Cut. (Part No: 182610)$36.50
Decal Set - Complete set for Model LI. (Part No: 183125)$67.00
Decal Set - Decal Set for John Deere Model MT. (Part No: 183712)		$53.66
Decal Set - Decal Set for John Deere Model R. (Part No: 183713)$48.50
Decal Set - Decal Set for John Deere Model 70 Diesel only. (Part No: 183706)		$48.50
Decal Set - Decal Set for John Deere Model 80 Diesel only. (Part No: 183707)		$48.50
Decal Set - Complete set for Model 330. (Part No: 183091)$47.66
Decal Set - Complete set for Model 430. (Part No: 164912)$57.00
Decal Set - Complete set for Model 435 Diesel. (Part No: 183138)$70.30
Decal Set - Complete set for John Deere Model 530. Printed on Mylar. (Part No: 183059)$43.76
Decal Set - Decal Set for John Deere Model 620. (Part No: 183705)		$43.76
Decal Set - For D 1939-1953. Complete decal set. (Part No: 183529)		$43.76
Decal Set - Complete set for GP Wide Tread. (Part No: 183109)$51.00
Decal Set - For MC. Complete decal set. (Part No: JDMC)		$35.77
Decal Set - For 420 with Yellow Lettering and Yellow Numbers. Complete decal set. (Part No: 102319)$83.00
Decal Set - For 720 Gas. COMPLETE decal set. Italic numbers with open top zero on the 720. (Part No: 182748)$43.76
Decal Set - For 1520. HOOD ONLY decal set. (Part No: 183226)$44.76
Decal Set - Hood only set for 2155. (Part No: 164892)$82.00
Decal Set - Hood only set for 2350. (Part No: 164894)$65.10
Decal Set - Hood only set for 2355. (Part No: 164895)$70.00
Decal Set - Hood only set for 2440 up to serial number 340999. (Part No: 164868)		$86.00
Decal Set - For 2440 after serial number 340999. Hood decal set only. (Part No: 164896)		$76.70
Decal Set - Hood only set for 2550. (Part No: 164869)$71.00
Decal Set - Hood only set for 2555. (Part No: 164870)$70.00
Decal Set - For 2630. Hood only decal set. (Part No: 183235)$42.76
Decal Set - For 2640. Hood Only Decal Set. (Part No: 164871)$71.00
Decal Set - Hood only set for 2650. (Part No: 183416)$60.00
Decal Set - For 2755. HOOD ONLY Decal Set. (Part No: 164874)$70.00
Decal Set - For 2840. Hood Only Decal Set. Printed on mylar. (Part No: 164875)$71.00
Decal Set - Hood only set for 2850. (Part No: 183423)$64.00
Decal Set - This Decal set is for the late 2940 with the yellow tiger stripe. HOOD ONLY Decal Set. (Part No: 164876)$66.00
Decal Set - Hood only set for 2950. (Part No: 164897)$66.00
Decal Set - For 2955. Decal Set. Hood Only. (Part No: 164877)$66.00
Decal Set - Hood only for 3155. (Part No: 164902)$65.00
Decal Set - Hood only for 4030. (Part No: 164889)$70.00
Decal Set - Hood Set only for 4040. (Part No: 164891)$70.00
Decal Set - For 4040S. Decal Set. (Part No: 164891)$70.00
Decal Set - Hood only for 4050. (Part No: 183403)$59.00
Decal Set - Hood set only for 4230. (Part No: 164909)$68.90
Decal Set - Hood set only for 4240 using black stripe with tiger paw. (Part No: 164910)$66.00
Decal Set - Hood set only for 4240S. (Part No: 183526)$59.00
Decal Set - Complete for 4320. (Part No: 183082)$45.50
Decal Set - Use JD419 (Part No: 164907)$54.00
Decal Set - Hood only set for 4440. Printed on Mylar. (Part No: 164913)$73.00
Decal Set - Complete set for 4620. (Part No: 164918)$58.00
Decal Set - For 4630. HOOD ONLY Decal Set. (Part No: 164908)$52.00
Decal Set - Hood only set for Late 4640. The Late has "Tiger Paw" striping. (Part No: 164919)$69.00
Decal Set - Hood only set for 4850. (Part No: 164923)$62.00
Decal Set - Hood Only For 5300. (Part No: 183405)$47.26
Decal Set - For 5400. HOOD ONLY Decal Set. (Part No: 183245)$47.26
Decal Set - Hood only for 6200. (Part No: 164926)$83.00
Decal Set - Hood only for 6300. (Part No: 164929)$81.00
Decal Set - Hood only for 6400. (Part No: 164930)$87.00
Decal Set - Hood only for 7200. (Part No: 183407)$48.00
Decal Set - Hood only for 7400. (Part No: 183408)$48.00
Decal Set, Chassis - Complete Mylar chassis decal set for model 1010 Special. (Part No: R5846)$77.40
Decal Set, Complete - Diesel for Model: 5020 model numbers are vinyl cut. (Part No: 183201)$45.50
Decal Set, Complete - For model 4520 model number are vinyl cut. (Part No: 183331)$45.50
Decal Set, Complete - For model 2510 model numbers are vinyl cut. (Part No: 183310)$48.00
Decal Set, Complete - Number are vinyl cut. For model 2520. (Part No: 183592)$45.50
Decal Set, Die Cut Vinyl - This is a complete set for John Deere M 1947-52. Vinyl with die cut lettering. (Part No: 102307)		$117.64
Decal Set, Hood - For model 8630. (Part No: 183367)$66.00
Decal Set, Hood - Early For Model: 4840 Hood Only. Has Silver outline around the letters. (Part No: 164922)$69.00
Decal Set, Hood - For model 4240 early using solid yellow stripe. (Part No: 183340)$55.00
Decal Set, Hood - For model 4040 early. (Part No: 183339)$55.00
Decal Set, Hood - For model 3140. (Part No: 183314)$64.00
Decal Set, Hood - For model 3130 late. (Part No: R4710)$43.80
Decal Set, Hood - For model 3130 early. (Part No: 183644)$45.50
Decal Set, Hood - For model 3120. (Part No: 183643)$47.26
Decal Set, Hood - For model 3040 late. (Part No: 183642)$64.00
Decal Set, Hood - For model 3040 early. (Part No: 183637)$46.00
Decal Set, Hood - For model 2840 early. (Part No: 183632)$47.26
Decal Set, Hood - For model 2640 early. (Part No: 183601)$47.26
Decal Set, Hood - For model 1630 late. (Part No: R4701)$43.20
Decal Set, Hood - For model 1630 early. (Part No: R4700)		$36.60
Decal Set, Hood - For model 1530 late. 2 3 8 inch wide strip. (Part No: 185260)		$44.76
Decal Set, Hood - For model 1530 early. 2 inch wide strip. (Part No: 164855)		$89.00
Decal Set, Hood - For model 3150. (Part No: 183315)$59.00
Decal Set, Hood - For model 4255. (Part No: 183647)$59.00
Decal Set, Hood - For model 4450. (Part No: 164914)$66.20
Decal Set, Hood - For model 4455. (Part No: 164915)$52.00
Decal Set, Hood - For model 4650. (Part No: 183341)$59.00
Decal Set, Hood - This Mylar hood decal set if for model 4755. (Part No: 164920)$54.00
Decal Set, Hood - This Mylar hood decal set is for model 4955. (Part No: 164924)$53.60
Decal Set, Hood - This is a Mylar Hood decal set for model 5200. (Part No: 183359)$47.26
Decal Set, Hood - Late. For Model: 4840. Does NOT have silver color around number. Hood Only Decal Set. (Part No: 164922)$69.00
Decal Set, Hood Only - This Mylar Hood Set for model 1050. (Part No: 124404)$54.00
Decal Set, Mylar - Decal Set for John Deere Model L (1937-1938) only. Mylar Set. (Part No: JDL)		$33.14
Decal Set - Vinyl Cut - This is a complete vinyl cut decal set for the John Deere model 50. (Part No: 183629)$92.00
Emblem -
  • For John Deere tractor models 655, 755, 756, 855, 856, 955< li>
  • Compatible with John Deere Lawn & Garden(s) 100, 108, 111, 111H, 112L, 116, 116H, 430< li>
  • Replaces John Deere OEM number M76640, M48718< li> < UL> (Part No: 158296)
$11.40
Emblem -
  • For John Deere tractor models 655, 755, 756, 855, 856, 955< li>
  • Compatible with John Deere Lawn & Garden(s) 430< li>
  • Replaces John Deere OEM number M87451< li> < UL> (Part No: 158297)
$5.16
Front Grille Emblem -
  • For John Deere tractor models 830, 930, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240 (s n 349999-earlier), 2440 (s n 349999-earlier), 2630, 2640 (s n 340999-earlier), 2840, 3030, 3130< li>
  • Replaces John Deere OEM number R59991, R55213, R67027< li>
  • Measures approximately 6" x 5"< li>
  • Two threaded shafts on back for mounting, nuts not included.< li> < UL> (Part No: 103951)
$22.26
Front Grille Emblem -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4440, 4450, 4455, 4630, 8450, 8560, 8570, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number R82804, AR77663, AR60518, AR79161, R67028< li>
  • Includes back plate< li> < UL> (Part No: 150057)
$34.76
Front Grill Name Plate - Says "John Deere". For model 40, 50, 60, 70, 80, Late R, Early 420. Replaces OEM# AA5383R. (Part No: 108740)$49.26
Front Medallion - Front medallion for the styled John Deere AO, (AR after serial number 272000), R up to serial #18912). JD yellow on metal background. Licensed John Deere Product. (Part No: 110119)		$60.50
Front Medallion - Front Medallion for models 320, 420, 520, 620, 720, (820 2 cylinder). Medallion measures 4 1 2 inches wide, 3 1 4 inches tall. Does NOT come with retainers (Part No: 103948)		$146.00
Front Medallion - 5 x 3 3 8. For tractor models 330, 430, 435, 530. Front Medallion. (Part No: 103949)		$134.00
Front Medallion - 5 3 4 x 4 1 8. For tractor models 630, 730, 830. Front Medallion. (Part No: 103950)		$73.00
Grille Emblem -
  • For John Deere tractor models 820, 920, 1020, 1120, 1520, 1830, 2020, 2030, 2130, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number T24437< li> < UL> (Part No: 169400)
$162.00
Hood Decal - For John Deere 4430 tractors. (Part No: 164907)$54.00
Hood Decal, 420 -
  • For John Deere tractor model 420< li>
  • Replaces John Deere OEM number HJD420< li> < UL> (Part No: 164938)
$56.70
Hood Decal, 4555 -
  • For John Deere tractor model 4555< li>
  • Replaces John Deere OEM number JD4555< li> < UL> (Part No: 164916)
$53.60
Hood Decal, 4560 -
  • For John Deere tractor model 4560< li>
  • Replaces John Deere OEM number JD4560< li> < UL> (Part No: 164917)
$54.00
Hood Decal, 4760 -
  • For John Deere tractor model 4760< li>
  • Replaces John Deere OEM number JD4760< li> < UL> (Part No: 164921)
$54.00
Hood Decal, 4960 -
  • For John Deere tractor model 4960< li>
  • Replaces John Deere OEM number JD4960< li> < UL> (Part No: 164925)
$54.00
Hood Decal, 6120, Vinyl -
  • For John Deere tractor model 6120< li>
  • Replaces John Deere OEM number L153859, L153860< li>
  • Material: Vinyl< li> < UL> (Part No: 167768)
$27.00
Hood Decal, 6220, Vinyl -
  • For John Deere tractor model 6220< li>
  • Replaces John Deere OEM number L153865, L153866< li>
  • Material: Vinyl< li> < UL> (Part No: 167765)
$29.26
Hood Decal, 630 -
  • For John Deere tractor model 630< li>
  • Replaces John Deere OEM number JD630< li> < UL> (Part No: 164927)
$44.40
Hood Decal, 6320, Vinyl -
  • For John Deere tractor model 6320< li>
  • Replaces John Deere OEM number L153869, L153870< li>
  • Material: Vinyl< li> < UL> (Part No: 167767)
$24.76
Hood Decal, 6420, Vinyl -
  • For John Deere tractor model 6420< li>
  • Replaces John Deere OEM number L153875, L153876< li>
  • Material: Vinyl< li> < UL> (Part No: 167770)
$27.00
Hood Decal, 650 -
  • For John Deere tractor model 650< li>
  • Replaces John Deere OEM number JD650< li> < UL> (Part No: 164931)
$49.76
Hood Decal, 6620, Vinyl -
  • For John Deere tractor model 6620< li>
  • Replaces John Deere OEM number L153891, L153892< li>
  • Material: Vinyl< li> < UL> (Part No: 167771)
$27.00
Hood Decal, 6820, Vinyl -
  • For John Deere tractor model 6820< li>
  • Replaces John Deere OEM number L153893, L153894< li>
  • Material: Vinyl< li> < UL> (Part No: 167764)
$34.00
Hood Decal, 6920, Vinyl -
  • For John Deere tractor model 6920< li>
  • Replaces John Deere OEM number L153895, L153896< li>
  • Material: Vinyl< li> < UL> (Part No: 167766)
$36.00
Hood Decal, 820 -
  • For John Deere tractor model 820 (2 Cyl., Diesel)< li>
  • Replaces John Deere OEM number JD820< li> < UL> (Part No: 164932)
$46.26
Hood Decal, 820 -
  • For John Deere tractor model 820 (2 Cyl.)< li>
  • Replaces John Deere OEM number JD830< li> < UL> (Part No: 164934)
$77.00
Hood Decal, A -
  • For John Deere tractor model A< li>
  • Replaces John Deere OEM number JDA< li> < UL> (Part No: 164937)
$47.26
Hood Emblem - For 165 UK. (Part No: 104137)$24.76
Hood Ornament - For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. (Part No: 108412)		$34.00
Hood Ornament - For tractor models (2040 SN# 350000 and up), 2150, 2155, 2255, 2350, 2355, (2440, 2640 SN# 341000 and up), 2550, 2555, 2750, 2755, 2855, 2940, 2950, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4550, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850. Replaces R50736, L40919. (Part No: 121684)		$36.76
Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Part No: 173325)$19.70
Serial Number Plate - With 2 rivets for Model L. 3 5 8 x 1 3 8 inches. (Part No: 182745)$38.50
Serial Number Tag - Comes with rivets. For model H. (Part No: 178547)$38.50
Serial Number Tag - Comes with rivets. For model H. (Part No: 178547)$38.50
Serial Number Tag - Comes with rivets. For model LA. (Part No: 178549)$38.50
Serial Number Tag - Comes with rivets. For Model: B. (Part No: 178458)		$38.50
Serial Number Tag with Rivets - Blank tags, 3-3 8" L x 1-5 8" H, Made in the USA. For model A. (Part No: 178460)		$38.50
Serial Number Tag with Rivets - Blank tag, 3-3 8" L x 1-5 8" H, made in the USA. For model A. (Part No: 178458)		$38.50
Serial Number Tag with Rivets - Blank tag, anodized aluminum, made in the USA. For model G. (Part No: 178459)		$38.50
Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair.Replaces: AR28048, AR28049 (Part No: 101968)		$134.40
Side Hood Molding - Right - 37" in length with 5 mounting studs (Fasteners NOT included). Green lettering, yellow background. Inside lettering is a decal. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 7020. Side molding with Decal - Right Side. (1525R) (Part No: 108514)		$49.20
Syncro-Range and Power Shift Decal Set - This Mylar set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Part No: 115031)		$46.10
Tractor Decal Set, Hood, John Deere 2040, Yellow -
  • For John Deere tractor model 2040< li>
  • Replaces John Deere OEM number JD412< li>
  • Hood Decal Set< li> < UL> (Part No: 164899)
$71.00
Tractor Decal Set, Hood, John Deere 2130, Yellow -
  • For John Deere tractor model 2130< li>
  • Replaces John Deere OEM number JD404< li>
  • Hood Decal Only< li> < UL> (Part No: 164890)
$80.90
Tractor Decal Set, Hood, John Deere 2240, Yellow -
  • For John Deere tractor model 2240< li>
  • Replaces John Deere OEM number JD416< li>
  • Hood Decal Set< li> < UL> (Part No: 164903)
$71.00
Tractor Decal Set, Hood, John Deere 3130, Yellow -
  • For John Deere tractor model 3130< li>
  • Replaces John Deere OEM number JD414< li>
  • Hood Decal Set< li> < UL> (Part No: 164901)
$48.90
Tractor Decal Set, Hood, John Deere 4010, Yellow -
  • For John Deere tractor model 4010< li>
  • Replaces John Deere OEM number JD416S< li>
  • Hood Decal Set< li> < UL> (Part No: 164904)
$71.00
Tractor Decal Set, Hood, John Deere 4255, Yellow -
  • For John Deere tractor model 4255< li>
  • Replaces John Deere OEM number JD4255< li>
  • Hood Decal Set< li> < UL> (Part No: 164911)
$54.00
Tractor Decal Set, Hood, John Deere 4320, Yellow -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number JD418< li>
  • Hood Decal Set< li> < UL> (Part No: 164906)
$68.00
Vinyl Decal Set -
  • For John Deere tractor model BR (Unstyled)< li>
  • Mylar decal set use Item #: 102358< li> < UL> (Part No: 102298)
$80.00
 
Drive Train
2ND, 5TH, & Reverse Sliding Gear - 18 Teeth For 720, 730 (Part No: 110994)$136.00
Axle Bearing - Part 2 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Part No: 112468)		$45.00
Axle Bearing - Part 6 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 112468)		$45.00
Axle Carrier Housing Pin - Part 1 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 124686)		$25.00
Axle Collar Seal, Rear - For tractor models 650, 670, 750, 770. (Part No: CH14692)$26.00
Axle Drive Shaft - Part 3 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Part No: 124721)		$99.00
Axle, Front - 38 teeth, Part 4 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 124723)		$202.97
Axle Gear - Part 1 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Part No: 124631)		$121.80
Axle Housing Gasket, Rear - For model 750. (Part No: CH15015)$20.72
Axle Planetary Gear - Part 7 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 114883)		$116.00
Axle Ring Gear - Part 4 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Part No: 124630)		$375.00
Axle Ring Gear - Part 5 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 164180)		$378.00
Axle Seal - Part 6 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Part No: S.07773)		$5.93
Axle Seal, Rear - For tractor models 650, 670, 750, 770. (Part No: CH14691)$16.59
Bearing Cup - For tractor models 4040, 4240, 4440. (Part No: 161913)$12.50
Bearing Cup - For tractor models 4040, 4240, 4440. (Part No: 180681)$20.00
Bevel Gear, Differential - 18 teeth. For tractor models JD300, JD301, JD310, JD380, JD400, JD401, JD480, 1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 302, 3300, 410, 820, 830, 840, 920, 1030, 1040, 210C, 2140, 300B, 301A, 302A, 310A, 310B, 310C, 315C, 401B, 401C, 401D, 410B, 410C. (Part No: 172322)		$95.00
Bevel Gear, Differential - 18 teeth. For tractor models 415B, 480C, 482C, 510B, 510C, 515B, 930, 940, JD480A, JD480B. (Part No: 172322)		$95.00
Cluster Gear - This Cluster Gear has 19 26 43 Teeth. Used on 40, 420, 430, 1010. Replaces original part numbers AT16550, AT10746, M3591T, M4205T (Part No: 151079)		$220.70
Clutch Gear, Power Shaft - 73 teeth, 6.500" I.D., 10.50" O.D.. For tractor models (1020, 1520, 1530, 2020, 2030 all with independent 540 rpm PTO). (Part No: 173461)		$363.20
Clutch Shaft - Shaft is 20 in. long. For tractor models 1030, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2120, 2150, 2155, 2350, 2355, 820, 830, 840, 920, 940, 1040. (Part No: 167589)		$333.40
Countershaft 2ND & - 5th GEAR - 30 Teeth. For tractor models 720, 730. (Part No: 111331)		$169.99
Countershaft Gear, Transmission - 16 12 12 spline, 4.020" long. For tractor models (1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440 SN# up to 340999 less hi-lo shift), 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2120, 2150, (2155, 2355, 2555 less reverser), 2250, 2255, 2350, 2450, 2550, 820, 830, 840, 920, 940, 1040. (Part No: T24728)		$238.45
Countershaft Idler Gear - For B (From S#201000), 50. Replace OEM Part Number B2417R. (Part No: 111048)		$98.00
Cover -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R, 9400, 9400T, 9410R, 9420, 9420T, 9430, 9460R, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number R116052< li>
  • Teeth: 38< li> < UL> (Part No: 158135)
$1325.00
Decal Set - Hood set only for 4055. (Part No: 164893)$62.00
Differential - For 820, 830, 1530, 2030, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 300B. Differential with 1 2" holes. For Differential with 7 16" holes, use Part #S.61553. (Part No: 180629)		$1125.00
Differential - For 820, 830, 1530, 2030, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 300B. Differential with 7 16" holes. For Differential with 1 2" holes, use Part #S.61784. (Part No: 180633)		$1150.00
Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 7 16 inch rivet holes and 1 9 16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1 16 inches OD and Right Hand bearing surface of 2 11 16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. (Part No: JDDIFF001)		$822.59
Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 1 2 inch rivet holes and 1 9 16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1 16 inches OD and Right Hand bearing surface of 2 11 16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. This assembly contains R51500, T30253, L29227, L29226, T29394, T21430 (Part No: JDDIFF002)		$822.60
Differential Cross Shaft - For tractor models 1530, 2030, 2040, 2155, 2240, 2355, 2355N, 2555, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. (Part No: 152044)		$30.00
Differential Gear Thrust Washer - When replacing L29227 differential spider gear, it is advised that these washers also get replaced. Four are used, sold individually. Used on John Deere 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2130, 2140, 2150, 2250, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Replaces John Deere part number L31793 (Part No: 161853)		$9.86
Differential Housing - Fits 1030, 1020, 1040, 1120, 1130, 1140, 1630, 1641F, 2020, 2030, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555 (Part No: 164809)		$142.00
Differential Housing - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1641F, (1640, 1840, 2040 SN# up to 410063), 2020, 2030, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, (300B SN# 195279 and up), (302A SN# 194773 and up), 401B, 401C, 410, 820, 830, 920, 930, 940, JD310, JD380, JD400, JD401, JD480, JD480B. (Part No: 151867)		$273.00
Differential Housing - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. Replaces R51500 (Part No: 154511)		$350.00
Differential Pinion Gear - Measuring 3 7 8 inches outside diameter, 1 11 16 inches inside diameter with 28 splines, 1 3 16 inches thick with 18 external teeth. This part replaces John Deere part numbers L28376, L158220 (Part No: 173236)		$96.00
Direction Reverse, Touch O Matic knob - Also used as Remote Control, and Hydraulic Knob. For tractor models 2020, 3010, 330, 430. (Part No: 126604)		$6.06
Drum, Hi-Low Range - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Part No: 119616)		$77.00
Drum, Reverse Range - For tractor models 2510, 2520, 3010, 3020, 4010, 4000, 4020. Replaces R31027, R27726 and R52499. (Part No: 124958)		$91.90
Final Drive Upper Pinion Shaft Seal - This Final Drive Upper Pinion Shaft Seal is used on L, LA and LI. Inside diameter 1.625 inch, outside diameter 2.441 inch, width 0.312inch. It Replaces original part number AL2021T. (Part No: 178204)		$5.00
Flywheel Cover Inspection Plate - For tractor models A, B, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: 125037)		$29.99
Front Power Shift Pack, Remanufactured, AR53210 -
  • For John Deere tractor model 3020 (s n 122999-earlier With PTO)< li>
  • Replaces John Deere OEM number AR53210< li>
  • Carefully Disassembled, Cleaned & Inspected< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 200427)
$2100.01
Front Power Shift Pack, Remanufactured, AR91600 -
  • For John Deere tractor model 3020 (s n 123000-later With PTO)< li>
  • Replaces John Deere OEM number AR91600< li>
  • Carefully Disassembled, Cleaned & Inspected< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 200428)
$2375.01
Gear, 2nd & 6th - 36 20 teeth, 5.375" O.D.. For tractor models 300, 300B, 301, 302, 302A, 310, 380, 400, 410, 401, 401C, 480, 480C, 1020, 1030, 1040, 1120, 1130, 1140, 1350. (Part No: 172309)		$169.70
Gear (2ND & 6TH) - 36 20 teeth. For JD 2040S, 2130, 2140, 2555, 2630, 2640, 2750, 2755, (1550, 1750, 1850, 2155, 2355, 2450, All SN# 756484>) (Part No: 172310)		$135.50
Gear (3RD & 7TH) - 31 20 tooth, 1.375 inch I.D. 4.750 O.D. For JD 1641F, 2020, 2030, 2040, 2120, 2440, 2630, 2640, 820, 920, 2240 SN# 350000> tractors. (Part No: 178599)		$211.60
Gear (4TH & 8TH) - 20 27 tooth, 4.075 inch O.D., 1.875 inch I.D. For JD 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830, (2155, 2355 All SN# <756483) tractors. (Part No: 172301)		$162.80
Gear (4TH & 8TH) - 27 20 tooth. For JD 2130, 2630, 2640, 2140 SN# <363674 tractors. (Part No: 127059)		$137.00
Gear Shift Arm -
  • For John Deere tractor model 3010< li>
  • Replaces John Deere OEM number R26397< li> < UL> (Part No: 155267)
$83.00
Gear Shift Boot - For tractor models L, LA, M, MT, 40, 320, 330, 420, 430, 435, 1010. (Part No: 126659)		$10.69
Gear Shift Boot - For tractor models 650, 750, 850, 950, 1050. Replaces CH10854, MIU800109, M803082, M810714, 194080-27252, 19408027252 (Part No: 118802)		$8.20
Gear Shift, Direction Reverse Knob - Also used on Touch-O-Matic, remote control, and hydraulic knobs. Plastic Knob, 3 8 inch fine thread. For tractor models M, MC, MT, 40, 320, (420 up to serial number 125000), 1010. (Part No: 126604)		$6.06
Gear Shift Knob - Plastic Knob, 3 8 inch fine thread. For tractor models 1520, 1530, 2030. (Part No: 126604)		$6.06
Gear Shift Knob - Plastic knob, 3 8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Part No: 109545)		$7.75
Gear Shift Lever - Used on John Deere models: 1020, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1130, 1520, 1530, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035EF, 2120, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 820, 830, 920, 930, 930VU. This part replace John Deere part numbers R53817, T22809 (Part No: 152054)		$22.00
Gear Shift Lever, Straight - For tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750. Knobs available, for BLACK order S.00641, for RED order S.72358, please specify in comments section if needed. Replaces R29936, R53817, T28809, 34H251, AL32791 (Part No: 152054)		$22.00
Gear Shift Pivot - This gear shift pivot Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 5010, 5020. 6030 Tractors. It also has applications in industrial applications. It R53247, AR26360, R47203. Pivots Marked R26185 (Part No: 152195)		$20.26
Gear, Transmission Countershaft - Two gears on single hub, 20 and 21 teeth. For model s:300(LESS REVERSER), 300B (IND), 301 (LESS REVERSER), 302 (LESS REVERSER), 302A (LESS REVERSER), 400 (LESS REVERSER), 401 (LESS REVERSER), 1020 (LESS REVERSER), 1030, 1040, 1120, 1130, 1140, 1350, 1520 (LESS REVERSER), 1530 (LESS REVERSER), 1550, 1630, 1640, 1641F. (Part No: 173323)$174.30
Idler Sprocket - Idler sprocket, 18 teeth, 5 8 bore. Gear case idler for separate placement fertilizer attachment, 15 foot fertilizer on grain drill 750~ fertilizer drive idler for grain drill 9000. For tractor models 118, 120, 18, 19, 3940, 3950, 3960, 3970, 750, 88, 9000. (Part No: 124934)		$15.20
Idler Sprocket - Idler sprocket, 17 teeth, 1 2 bore, RC50 chain for combines: 55, 95, 105, 3300, 4400, 6600 & 7700. May be used for AH87204, AH98176. For 105, 3300, 4400, 55, 6600, 7700, 95 (Part No: 118151)$17.76
Inner Differential Shaft Seals - This inner differential shaft seals has a 1.125 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.250 inch wide. It Fits: L, LA, LI. Replaces: AL2122T, AL2653T, AR608R (Part No: 106846)		$14.26
Inner Rear Axle Seal - This inner rear axle seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 50, B, BN, BNH, BW, BWH, BWH40 (Sn: 60000 & up) ], BO, BR (Sn: 329000 & up). Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484, CR23710, 412119 (Part No: 106642)		$10.70
Input Planetary Clutch, Remanufactured, RE35456 -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE35456< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 203771)
$1900.01
Oil Pump - Syncro-Range Transmission -
  • For John Deere tractor models 4000, 4020 (s n 201000-later)< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number AR41949, R40827, AR40670< li>
  • Replaces Casting number R40637< li>
  • Includes Gear Set And Cover Plate< li> < UL> (Part No: 157575)
$208.00
Oil Pump, Transmission - Transmission Oil Pump Casting # R39244 or R57959, used only with dual speed PTOs. For tractor models 1020, 1030, 1120, 1130, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2135, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 300B, 301A, 302, 302A, 401B, 401C, 401D, 820, 830, 840, JD300, JD301, JD380, JD400, JD401, JD480, JD480A, JD480B. Replaces AR39107. (Part No: 150776)		$324.70
Oil Seal - Seal. For tractor models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T25809 hub, 2240, For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830 (Part No: 110547)		$6.26
Output Planetary Carrier Planetary Pinion -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R71581< li>
  • Power Shift Transmission< li> < UL> (Part No: 115639)
$54.00
Pinion Gear - Used with R59698 Shaft. Gear is 2.755 inches wide and has 31 teeth. For tractor models 4255, 4350, 4440 and front axles on 8440, 8450 and (8630 after SN# 7843). (Part No: 173355)		$193.00
Pinion Gear - Used with R67199 (R57401) Shaft. Gear is 2.250 inches wide and has 31 teeth. For tractor models 8430 front axle and 8630 front axle before SN# 7842. Replaces OEM# R57402 (Part No: 113203)		$163.00
Pinion Gear, Planetary - 18 teeth, 1.759" wide. For tractor models 1020, 1120, 1130, 1140, (1350 SN# 627639 and up), 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 401B, 401C, 401D, 410, 480C, 482C, 820, 920, JD300, JD301, JD310, JD380, JD400, JD401, JD480. (Part No: 126896)		$54.80
Pinion Gear, Planetary - 26 tooth, 2.243 inches wide. For tractor models: 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N. (Part No: 185473)		$85.30
Pinion, Low Range Synchro Transmission - This Low Range Synchro Transmission Pinion has 24 and 14 Teeth. It is used on John Deere 4000, 4020, 4230, 4430 All with Synchro Range Transmissions. Replaces R44637, R51518 and R59641 (Part No: 126970)		$114.00
Pinion Shaft - Used with R59696 Pinion Gear. Shaft is 10.58 inches long, has 14 Teeth and 18 Spline. For tractor models 4255, 4350, 4440 and front axles on 8440, 8450 and (8630 after SN# 7843). (Part No: 173496)		$380.00
Pinion Shaft - Used with R65635 Pinion Gear. Shaft is 10.090 inches long, 14 teeth and 18 spline. For 8430 front axle and 8630 front axle before SN# 7842. Replaces OEM# R57401. (Part No: 113204)		$385.00
Pinion Shaft, Planetary - For tractor models (1020, 1120, 920 SN# 98543 and up), 1030, 1040, 1052, 1130, 1140, (1350 SN# 627639 and up), 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 1950N, (2020 SN# 89328 and up), 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2255, 2350, (2440 SN# up to 340999), 2550, 300B, 940. (Part No: 172647)		$27.50
Planetary Drive Shaft - 15 Tooth, 28 Spline, 12.500 inch long. For 1640, 2040, 2040S, 2140 SN# 370493->, 2141, 2250, 2355, 2355, 2450, 2541, 2550, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N tractors (Part No: L36202)		$185.09
Planetary Drive Shaft (LH) - 12 Tooth, 23 Spline, 9.650 inch Long. For JD 4630 SN# 007000-> tractors (Part No: 126904)		$152.00
Planetary Drive Shaft, RH - 12 Tooth, 23 Spline, 6.940 inch long. For JD 1020, 1530, 2020, 2030, 2440, (310A, 410 All IND SN# <-371556), 820, 830, 930, 940, 300, 310, 400, 480 tractors (Part No: 126897)		$184.00
Planet Pinion Carrier -
  • For John Deere tractor models 8560, 8760, 8960< li>
  • Replaces John Deere OEM number R84416< li>
  • Fits: Hi-Lo Planetary Assembly 24-Speed PowrSync Transmission< li> < UL> (Part No: 158132)
$1200.00
Planet Pinion Carrier Seal - This planet pinion carrier sea has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 8130, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8320R, 8320RT, 8330, 8330T, 8345R, 8345RT, 8430, 8430T, 8530. Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484, CR23710, 412119 (Part No: 106642)		$10.70
Powershift Clutch Kit C1, C2 & Rear PTO -
  • For John Deere tractor model 4630 (s n: 016988-later)< li>
  • Replaces John Deere OEM number RE23286, R46418, R51676, R77663, R97770, R94326, R39876, AR70406, R120841, R43381, 19H2681< li>
  • Kit Includes: (13) A-RE23286 (10) A-R46418 (2) A-R51676 (1) A-R77663 (3) Pump Gasket (8) Seals for the following pistons: Oil Pump, C1, C2 & Rear PTO (6) Torque Bolts< li>
  • For Clutch Disc use Item #: 127091< li> < UL> (Part No: 173443)
$690.00
Power Shift Pack - 3rd Planetary Ring Gear -
  • For John Deere tractor models 4555, 4560, 4650 (s n 007194-later), 4755, 4760, 4850 (s n 007615-later), 4955, 4960< li>
  • Replaces John Deere OEM number R71754< li>
  • 3rd Planetary Gear< li>
  • 105 Teeth< li>
  • 62 Splines< li> < UL> (Part No: 109710)
$336.00
Power Shift Pack - High Range Clutch Hub -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE16825< li> < UL> (Part No: 109714)
$389.97
Power Shift Pack - Oil Pump Gear -
  • For John Deere tractor models 4630 (s n 030023-later), 4640, 4840< li>
  • Replaces John Deere OEM number R82364< li> < UL> (Part No: 109712)
$285.00
Power Shift Pack - Planetary Clutch Hub -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE40456< li> < UL> (Part No: 109711)
$174.00
Power Shift Pack Transmission Oil Pump Gear -
  • For John Deere tractor models 4630, 4640, 4840< li>
  • Replaces John Deere OEM number R52229< li> < UL> (Part No: 109713)
$560.00
PTO Clutch & Torsional Dampener Assembly - Carraro -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number RE67589< li>
  • Replaces Carraro manufacturer number 351374< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154675)
$470.00
PTO Gear - This PTO Gear has 28 Teeth. It is used on 1010, 2010, both with Dual Range PTO. Replaces: T13512 (Part No: 125625)		$245.00
PTO Gear -
  • For John Deere tractor models 2840, 3020, 3030, 3120, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455< li>
  • Replaces John Deere OEM number R33339< li> < UL> (Part No: 121744)
$195.00
PTO Gear -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6603, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520< li>
  • Replaces John Deere OEM number R125178< li>
  • Teeth: 52< li>
  • Spline: 12< li> < UL> (Part No: 165228)
$40.50
PTO Gear -
  • For John Deere tractor models 5210, 5220, 5225, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400N, 5410, 5420, 5420N, 5425, 5425N, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N< li>
  • Replaces John Deere OEM number R125304< li>
  • Teeth: 24< li>
  • Spline: 25< li> < UL> (Part No: 165230)
$74.00
PTO Gear -
  • For John Deere tractor models 5210, 5220, 5225, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400N, 5410, 5420, 5420N, 5425, 5425N, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N< li>
  • Replaces John Deere OEM number R125305< li>
  • Spline: 24< li> < UL> (Part No: 165231)
$110.00
PTO Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R278369< li>
  • Teeth: 59< li>
  • Spline: 19< li> < UL> (Part No: 165232)
$650.00
PTO Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R278370< li>
  • Teeth: 49< li>
  • Spline: 19< li> < UL> (Part No: 165233)
$590.00
PTO Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R278371< li>
  • Teeth: 38< li>
  • Spline: 19< li> < UL> (Part No: 165234)
$440.00
PTO Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R256357< li>
  • Teeth: 25< li> < UL> (Part No: 165235)
$395.00
PTO Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R258057< li>
  • Teeth: 36< li> < UL> (Part No: 165236)
$475.00
PTO Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R258055< li>
  • Teeth: 36< li>
  • Spline: 36< li> < UL> (Part No: 165237)
$430.00
PTO Guide -
  • For John Deere tractor models 3020 (s n 122999-earlier), 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 600< li>
  • Replaces John Deere OEM number R33855< li> < UL> (Part No: 121843)
$57.80
PTO Lower Gear -
  • For John Deere tractor models 600, 4000, 4020, 4320< li>
  • Replaces John Deere OEM number R39792< li> < UL> (Part No: 173937)
$450.00
PTO Open Single Row Ball Bearing -
  • For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 400, 401, 500, 600< li>
  • Replaces John Deere OEM number JD9320< li>
  • I.D.: 2.559"< li>
  • O.D.: 4.724"< li>
  • Width: .906"< li> < UL> (Part No: 121743)
$19.26
PTO Output Drive Shaft -
  • For John Deere tractor models 7210, 7405, 7410, 7420, 7500, 7505, 7510, 7515, 7520, 7610, 7710, 7810< li>
  • Replaces John Deere OEM number R133086< li> < UL> (Part No: 151034)
$305.90
PTO Output Drive Shaft -
  • For John Deere tractor models 7610, 7710, 7810< li>
  • Replaces John Deere OEM number R129763< li> < UL> (Part No: 160761)
$283.50
PTO Output Drive Shaft -
  • For John Deere tractor models 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8320R, 8330, 8335R, 8345R, 8360R, 8400, 8410, 8420, 8430 (Model Year 2006-2009), 8520, 8530< li>
  • Replaces John Deere OEM number R266971< li> < UL> (Part No: 160762)
$262.50
PTO Output Drive Shaft -
  • For John Deere tractor models 7200, 7400, 7600, 7700< li>
  • Replaces John Deere OEM number R125088, R95161< li> < UL> (Part No: 176682)
$274.00
PTO Output Shaft -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6510L, 6605< li>
  • Replaces John Deere OEM number L102682< li> < UL> (Part No: 164559)
$344.00
PTO Output Shaft -
  • For John Deere tractor models 7630, 7720, 7730, 7820< li>
  • Replaces John Deere OEM number R230860, R183232< li> < UL> (Part No: 164560)
$375.00
PTO Output Shaft -
  • For John Deere tractor models 7630, 7720, 7730, 7820< li>
  • Replaces John Deere OEM number R230860, R183232< li> < UL> (Part No: 164584)
$343.00
PTO Output Shaft -
  • For John Deere tractor models 6105M, 6105R, 6110M, 6110R, 6115M, 6115R, 6120, 6120L, 6120M, 6120R, 6125M, 6125R, 6130M, 6130R, 6140M, 6145M, 6215, 6220, 6220L, 6230, 6320, 6320L, 6330, 6415, 6420, 6420L, 6430, 6520L, 6615, 6715, 7130, 7230< li>
  • Replaces John Deere OEM number L202816, L151901, L173243< li> < UL> (Part No: 180759)
$350.00
PTO Output Shaft, 540 RPM -
  • For John Deere tractor models 5045E, 5050E, 5055E, 5075E, 5076E, 5076EL, 5076EN, 5082E, 5083E, 5083E (Limited), 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090EN, 5093E, 5093EN, 5100E, 5101E, 5101E (Limited), 5101EN, 5310, 5425, 5425H, 5425HC, 5625, 5625HC, 5725H, 5725HC< li>
  • Replaces John Deere OEM number SU303720< li> < UL> (Part No: 176710)
$216.00
PTO Shaft -
  • For John Deere tractor models 4640, 4840 (With Power Shift Transmission)< li>
  • Replaces John Deere OEM number R58001, R72447< li>
  • 52.53" Long< li>
  • 20 6 Spline< li> < UL> (Part No: 112090)
$570.00
PTO Shaft -
  • For John Deere tractor model 4630 (Syncro range s n 006999-earlier)< li>
  • Replaces John Deere OEM number R51100< li>
  • 1000 RPM< li>
  • Length: 54.187"< li>
  • Splines: 21 6< li> < UL> (Part No: 112564)
$770.00
PTO Shaft -
  • For John Deere tractor models 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4350< li>
  • Replaces John Deere OEM number T28672< li>
  • 1000 RPM< li>
  • 21 Spline< li> < UL> (Part No: 113971)
$125.00
PTO Shaft -
  • For John Deere tractor model 4640 (quad trans.)< li>
  • Replaces John Deere OEM number R59063, R65365< li>
  • Dim A (1): 60.375" Long< li>
  • Dim B (2): 20 26 Spline< li> < UL> (Part No: 128302)
$814.00
PTO Shaft -
  • For John Deere tractor model 4630 (s n 007000-later Syncro & Quard Range)< li>
  • Replaces John Deere OEM number R54545< li>
  • Length: 62.375"< li>
  • Splines: 21 26< li>
  • 1000 RPM< li>
  • Diameter: 1.671" 1.961"< li> < UL> (Part No: 129310)
$780.00
PTO Shaft -
  • For John Deere tractor models 7630, 7720, 7730, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8300, 8310, 8320, 8400, 8410, 8420, 8530< li>
  • Replaces John Deere OEM number R122910, R266970< li>
  • 9.50" Long< li>
  • 20 33 Spline< li> < UL> (Part No: 153917)
$204.80
PTO Shaft -
  • For John Deere tractor models 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AR45376< li> < UL> (Part No: 156334)
$4150.00
PTO Shaft -
  • For John Deere tractor models 4455, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R80884, R77767< li>
  • Length: 56.50"< li>
  • 20 28 Spline< li>
  • 1000 RPM< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162144)
$495.00
PTO Shaft -
  • For John Deere tractor models 820 (s n 178090-later), 830, 840 (s n 437369-earlier), 920 (s n 178090-later), 930, 940 (s n 437369-earlier), 1020 (s n 178090-later), 1030, 1040 (s n 437369-earlier), 1120 (s n 178090-later), 1130, 1140 (s n 437369-earlier), 1630, 1640, 1830, 1840, 2030, 2040, 2130, 2140< li>
  • Replaces John Deere OEM number L28712< li>
  • RPM 540< li>
  • Length: 31.250"< li>
  • Spline: 6< li> < UL> (Part No: 165057)
$114.00
PTO Shaft -
  • For John Deere tractor models 6105M, 6115M, 6125M, 6140M, 6230, 6330, 6430< li>
  • Reversable 540 - 1000 RPM< li> < UL> (Part No: 167852)
$224.00
PTO Shaft -
  • For John Deere tractor models 7720, 7820, 7920, 8010, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520< li>
  • Replaces John Deere OEM number R122909< li>
  • 13.47" Long< li>
  • 21 6 29 Spline< li> < UL> (Part No: 168421)
$360.00
PTO Shaft - 1000 RPM -
  • For John Deere tractor model 4630 (POWER SHIFT)< li>
  • Replaces John Deere OEM number R50300< li>
  • Length: 54.812"< li>
  • Splines: 21 6< li> < UL> (Part No: 165354)
$941.90
PTO Shaft - 540 RPM -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5415, 5420, 5425, 5500, 5510, 5520, 5615, 5625, 5715, 5725< li>
  • Replaces John Deere OEM number R113859< li>
  • Length: 10.96"< li>
  • Splines: 6, 25< li> < UL> (Part No: 123317)
$110.00
PTO Shaft - 540 RPM -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N< li>
  • Replaces John Deere OEM number L39949< li>
  • Length: 40"< li>
  • Spline: 6< li>
  • 540 RPM< li> < UL> (Part No: 162348)
$455.00
PTO Shaft - 540 RPM -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6405, 6420< li>
  • Replaces John Deere OEM number L76496, L156977< li>
  • Splines: 6 25< li>
  • Length: 14.11"< li> < UL> (Part No: 162349)
$275.00
PTO Shaft less Bearing -
  • For John Deere tractor models 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4055, 4255, 4350, 4555< li>
  • Replaces John Deere OEM number R41756, R38233< li>
  • Length: 10.687"< li>
  • 540 RPM< li>
  • Spline: 6< li>
  • Bearing race JD7557 not included< li> < UL> (Part No: 121438)
$86.90
Rear Axle Felt Seal - 3.50" I.D., 4.683" O.D., .425" thick. For tractor models (A up to SN# 547321, (AN up to SN# 547321), (AW up to SN# 547321), (ANH SN# 583999 & up), (AWH SN# 583999 & up), (60 all Orchard and Standard), (620 Orchard only), (630 Orchard only). (Part No: 179833)		$29.00
Reverse Range Shift Collar - This Reverse Range Shift Collar is used on John Deere 4000 and 4020 Tractors with Synchro Range Transmissions. Replaces original part number R33382 (Part No: 127292)		$83.00
Ring -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840< li>
  • Replaces John Deere OEM number R43752< li> < UL> (Part No: 150382)
$42.76
Ring Gear - For AL111779 and AL111778 (ZF APL2035) MFWD Front Axles. The Ring Gear has 56 and 98 teeth. 310G Indust Const, 310SG Indust Const, 315SG Indust Const, 3200 Telehandler, 3215 Telehandler, 3220 Telehandler, 3400 Telehandler, 3415 Telehandler, 3420 Telehandler, 3800 Telehandler, 410D Indust Const, 410E Indust Const, 410G Indust Const, 510D Indust Const, 6010, 6020, 6110, 6110L, 6120, 6120L, 6210, 6210L, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6400SP, 6403, 6405, 6410, 6410L, 6410S, 6420, 6500, 6500L, 6510L, 6510S, 6603, SE6010, SE6020, SE6110, SE6120, SE6220, SE6310, SE6320, SE6410, SE6420 (Part No: 168981)		$441.00
Ring Gear and Pinion Set - Has 14 and 37 Teeth. It is used on John Deere models: 6205, 6215, 6505, 6506, 6510, 6515, 6520, 6600, 6605, 6610, 6615, 6620, 6715, 7220, 7320, SE6320, SE6420, SE6510, SE6520, SE6610, SE6620 (Part No: 164144)		$620.00
Ring gear & pinion shaft - For Quad and late Syncro. For JD 4040, 4320, 4240, 4430, 4440, 4450 tractors. (Part No: 166001)		$610.00
Ring & Pinion Set - For 4630 (From S#7000) with Quad or Synchro Transmission (Part No: R3066)$818.67
Shaft, Pinion - Pinion Shaft, MFWD. For tractor models 7630, 7715, 7720, 7730, 7815, 7820. (Part No: 114383)		$147.00
Shaft, Sun Gear - Sun Gear Shaft for models: 6300 (APL2035 SN# <124984) and 6400 (APL2035 SN# <124984). (Part No: 160585)		$56.00
Shaft, Sun Gear - Sun Gear Shaft for models: 6900 (APL2060; European), 6910 (APL2060; European SN# <225863), 6910S 6910S (APL2060; European SN# <225863), 7405 7405 (APL2060), 7500 7500 (APL2060). (Part No: 173270)		$138.00
Shift Collar - For model 4010. (Part No: 160476)		$140.70
Shift Collar - For tractor models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 serial number up to 015963 syncro range), (4230 syncro range up to serial number 037595). Replaces R26074, R33383. (Part No: 127291)		$84.90
Shift Collar - 20 spline. For tractor models 1052, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2120, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 840, 920, (2040, 2240 SN# 350000 and up). (Part No: 172429)		$72.00
Shift Collar Carrier - For tractor models 1020, 1030, 1120, 1130, 1630, (1640, 2040S, 2140 SN# 430000 and up), 1641F, 1830, 2020, 2030, (2040, 2240SN# 350000 and up), 2120, 2130, 2150, (2155 SN# up to 765146), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 820, 830, 920, 930. (Part No: 164811)		$93.00
Shift Collar, Planetary - For tractor models 4010, 4350, (4000, 4020, 4320 all syncro range), (4040, 4230, 4240, 4430 all syncro & quad range), (4440 quad range), (JD600 collar shift). (Part No: 125656)		$79.00
Shift Collar, Reverse Range - For tractor models (2510, 2520, 3020 all with syncro drive). (Part No: 156886)		$96.00
Shift Collar, Transmission Countershaft - 20 spline. For tractor models (1020, 1120, 2020, 2120 SN# 77422 and up), (1030, 1130, 1630 SN# 317105 and up), 1140, 1350, 1550, 1640, 1641F, 1750, 1830, 1840, 1850, 2030, (2040, 2240 SN# 350000 and up), 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 840, 940. (Part No: 126887)		$52.00
Shift Lever - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, (820 SN# up to 024012) (Part No: 172674)		$61.00
Shift Lever Knob - This Red Shifter Knob is 1.600 inches outside diameter and has 3 8 inch - 24 UNF fine threads. Replaces John Deere part numbers R153875, R161382, R50864, R58296 (Part No: 114351)		$10.79
Spider Gear, Differential - 11 teeth. For tractor models 1020, 2020, 2030, 2040, 2855, 840, 1030, 1040, 1120, 1130, 1530, 1630, 1640, 1830, 1840, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 820, 830, 920, 930, 940. Replaces L113016, L29227 (Part No: 109843)		$45.80
Split Sprocket - Split sprocket, 10 teeth, 1-3 4 hex bore. For feeder house chain, upper shaft. Can replace original one piece chain sprocket H118583 on combines: 7700, 7701, 7720, 7721, 8820. For 7700, 7701, 7720, 7721, 8820 (Part No: 118098)$84.00
Split Sprocket - Split sprocket, 8 teeth, 1 round bore. For clean grain elevator chain. Upper and or lower sprocket, check shaft diameter before ordering. Can replace original one piece chain sprocket H108576 on combines: 6600, 6601, 6602, 6620, 6622, 7700, 7701, 7720, 7 For 6600, 6601, 6602, 6620, 6622, 7700, 7701, 7720, 7721, 8820 (Part No: 180147)		$162.00
Split Sprocket - Split sprocket, 8 teeth, 1-1 4 round bore. For clean grain elevator chain. Upper and or lower sprocket, check shaft diameter before ordering. Can replace original one piece chain sprocket H91334 on combines: 6600, 6601, 6602, 6620, 6622, 7700, 7701, 7720 For 6600, 6601, 6602, 6620, 6622, 7700, 7701, 7720, 7721, 8820 (Part No: 180148)$114.00
Synchronizer - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro & quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Part No: 150072)		$110.00
Transmission Clutch Drum -
  • For John Deere tractor models 4630, 4640, 4840< li>
  • Compatible with John Deere Construction & industrial models 740 (s n 186642-earlier), 760A (s n 031543-earlier)< li>
  • Replaces John Deere OEM number R52471< li> < UL> (Part No: 173826)
$670.00
Transmission Countershaft - Splined Shaft is 11.69 in long, has 37 tooth gear. Fits 1020, 1030, 1120, 1130, 140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 2020, 2120, 2150, 2240, 2255, 2350, 2550, 820, 830, 920, 940. (Part No: 164810)		$330.80
Transmission Countershaft Low Range Gear - 20 22 Tooth, 3.425 O.D., 1.900 I.D. For JD 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830 (2155, 2355, 2355N, 2555 All SN# <756483) tractors. (Part No: 164809)		$142.00
Transmission Drive Shaft - For tractor models (1020, 1520, 1530, 2020, 2030, 2040, 2240, 820, 830 alll with collar shift transmission), (2155, 2355, 2555 up to SN# 756483 with collar shift trans). (Part No: 167853)		$430.00
Transmission Drive Shaft - For tractor models 600 with collar shift transmission, 4000 and 4020 with synchro range transmission. (Part No: 108519)		$250.00
Transmission Drive Shaft - For industrial models: 500, 500A, 500B, 500C, all with collar shift transmission. For tractor models: 2510, 2520, 3020 all with synchro range transmissions. (Part No: 126760)		$186.00
Transmission Drive Shaft Bearing - Used in transmission drive and damper assembly on John Deere industrial models: 444, 444C, 444CH, 444D, 544, 544A, 544B, 544C, 544D, 644B, 644C, 644D, 646, 646B, 646C, 762, 762A. This bearing measures 1-17 32 inches inside diameter, 3-9 64 inches outside diameter. Replaces OEM numbers JD8524, 158363A, 662519R1, 71131910, 88128R, 88128RA, 72161731 (Part No: 114890)		$14.76
Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Part No: 110864)		$12.76
Transmission Gasket Set - For 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Transmission Gasket Set. 24 Pieces. (S.58863) (Part No: 161857)		$29.00
Transmission Input Quill Seal - This transmission input quill seal has a 1.125 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.250 inch wide. It Fits: M, MC, MI, MT, MTN, MTW, 320, 330, 40, 420, 430. Replaces: AL2122T, AL2653T, AR608R (Part No: 106846)		$14.26
Transmission input shaft - 23.310 inch long, 16 16 spline. For JD 3010 tractor. (Part No: 178341)		$155.00
Transmission Oil Cup - Used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 3030, 3350, 830, 840, 940, this part replaces OEM numbers AT22359, AL28231, R39090 (Part No: 179683)		$20.76
Transmission Oil Manifold - For 830, 1020, 1030, 1120, 1130, 2020, 2030, 2040, 2120, 2155, 2240, 2255, 2350, 2355, 2355N, 2550, 2555, 2755, 2855. Oil Manifold. (S.72673) (Part No: 179462)		$69.00
Transmission Oil Pump -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040 (s n 350000-later), 2040S (s n 430000-later), 2150, 2155 (s n 731149-earlier), 2240 (s n 350000-later), 2255, 2350, 2355, 2355 (s n 731149-earlier), 2355N, 2550, 2555< li>
  • Replaces John Deere OEM number AL41637, AL29878< li>
  • For continuous running PTO, 540 RPM< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155321)
$375.00
Transmission Oil Pump -
  • For John Deere tractor models 2155, 2355, 2355N, 2555, 2755, 2955< li>
  • Replaces John Deere OEM number AL68094< li> < UL> (Part No: 164073)
$450.00
Transmission Oil Pump Gears - Includes 2 gears only. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1830, 2020, 2030, (2040, 2240 SN# up to 349999), 2120, 2130, 820, 830, 840, 940. (Part No: 152038)		$136.00
Transmission Oil Pump Seal - This transmission oil pump seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8520, 8520T. Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484, CR23710, 412119 (Part No: 106642)		$10.70
Transmission Oil Sensor -
  • For John Deere tractor models 6120, 6220, 6320, 6320L, 6420, 6420L, 6520L, 7220, 7320, 7420, 7520, 7610 (s n 089999-earlier), 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7720, 7810 (s n 089999-earlier), 7810 (s n 090000-later), 7820, 7920, 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number RE217077, RE163656< li> < UL> (Part No: 168862)
$45.00
Transmission Pump - This Transmission Pump is for Models with SGB(Sound Guard Body). Replaces AL69762 (Part No: 178955)		$580.00
 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
24V to 12V Conversion Kit -
  • For John Deere tractor models 5010, 5020< li>
  • Kit includes: Gear reduction starter, Internally regulated 12 volt alternator with pulley and bracket, ground cables< li> < UL> (Part No: 112509)
$710.00
Accessory Relay - This accessory relay fits the following tractor models: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, and 2630. It has 5 pins and is made to accommodate 12 volt systems. Replaces part number: AR74411. (Part No: 115683)		$7.70
Air Conditioning Compressor Adapter - Used on John Deere models 4040, 4230, 4240, 4430, 4440, 4630 (Part No: R228845)		$36.50
Alternator - New alternator assembly. 12 volt, 90 amp, DOES NOT come with pulley. For tractor models 400, 9450, 9500, 9550, 9600, 9650, 7445, 7450, 9930, 9960, 9965, 6500, 3430, 3830, 3930, 210C, 310(C, D, E), 315(C, D), 410(C, D, E), 510(C, D), 610C, 710(B, C, D), 400G, 450G, 455G, 550G, 555G, 650G, 540(E, G), 548(E, G), 640(E, G), 648(E, G), 740(E, G), 748(E, G). Replaces TY2485 and Bosch 0-120-484-011. (Part No: 112390)		$92.00
Alternator - Remanufactured alternator with heavy duty internal regulator. 80 amp~ and uses a 3 terminal plug. For tractors: 4020, 4030, 4230, 4320, 4430, 4620, 4630, 6030, 7020, 7520, 8430, 8630~ Combines: 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 8820. Forage harvesters: 5200, 5400. Replacement For 1020, 2020, 2510, 2520. (Part No: 110572)		$102.00
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00
Alternator - 12 volt, 75 amp. For model 425 1975-84. Replaces 1117232. (Part No: ADR0073)		$310.73
Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (425 1974 with 6V-71 eng.), (H7 1972-73 with 100 gas or dsl), (4030 1973-76 with 329 dsl), (5200 1974-77 with 404 dsl), (5400 1974-77 with 531 dsl), (4230, 4430 1973-76 with 404 dsl), (4620 1969-73 with 404 dsl), (4630 1973-76 with 404 dsl), (6030 1970-77 with 531 dsl), (7020 1971-75 with 404 Turbo Dsl), (7520 1971-75 with 531 dsl). Replaces 1100580, 1100491, 1102359. (Part No: 111768)		$77.00
Alternator - 12 volt, 35 amp. For tractor models 925, 930VU, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 940, (940 1980-84), 940V, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1040, (1130 1970-84), 1140F, 1140V, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1640, 1640F, (1830 1973-82), 1840, 1840F, (2020 1970-79), 2030, 2030OU, 2035, 2035EF, (2040 1976-82 with 164 dsl & 1979-85 with 152 dsl), 2040F, 2040S, (2120 1970-79), 2130, 2135, 2140, (2750 1983-86 with 239 dsl), (2840 1977-79 with 329 dsl), (2940 1980-84 with 359 dsl), (2950 1983-86 with 359 dsl), (3030 1979-82), 3130, 3135, 3140, (820 1968-72 with 3 cyl eng. & internal reg.), (830 1972-75 with 3 cyl), (920 1970-75), (930 1972-79), (1530 1974-75), (2150 1982-87 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl). Replaces 0120339512, 0120339545. (Part No: 113331)		$114.00
Alternator - 12 volt, 90 amp. For tractor models (4400 1970-82 with 329 dsl), (4420 1980-86 with 359 dsl), (6600 1973-77 with 329 dsl), (6600 1978-82 with 404 dsl), (6602 1973-74 with 362 gas), (6602 1971-82 with 404 dsl), (6620 1979-88 with 466 dsl), (6622 1980-85 with 466 dsl), (7700 1970-82 with 404 dsl), (7720 1983-89 with 466 dsl), (7722 1986-89 with 466 dsl), (8820 1983-92 with 466 dsl), (9400 1989-93 with 466 359 dsl), (9500, 9600, 9650 1989-93 with 466 dsl), (7440 1984-86 with 359 dsl), (7445 1987-94 with 359 dsl), (9920 1983-87 with 359 dsl), (9930 1987-93 with 359 dsl to SN# 2000), (9940 1983-86 with 466 dsl), (9950 1987-90 with 466 dsl), (3430, 3830, 3930 1985-92). Repalces 8MR2030T. (Part No: 109803)		$221.00
Alternator - 12 volt, 95 amp. For tractor models (9400 1989-93 with 466 359 dsl), 9410, 9450, (9500 1989-93 with 466 dsl), 9510, 9550, 9550SH, (9600, 9650 1989-93 with 466 dsl), 9610, (9650CTS, 9650STS, 9750STS, 9780CTS, 9860STS, (CTS 1992-94), CTSII, (7450 1995-97 with 359 dsl), (9930 1987-93 with 359 dsl), (9960 1987-93 with 466 dsl), (9965 1993 on with 466 dsl), 1550, 1750, 1850, 1950, 2250, (2355 1987-92), 2450, (2555, 2755 1987-92 with 239 dsl), 2650, 2850, (2955, 3155 1987-92 with 359 dsl), 3050, (3055 1992 with 359 dsl), 3150, (3255 1992 with 359 dsl), 3350, 3640, 3650, (6100, 6200, 6300, 6400, 6500 1993 on with 239 dsl), 6506, 6600, 6605, 6800, 6900, (3430, 3830, 3930 1985-92 with Bosch Alt.). Replaces 0120484011, 0120484003, AL78690, AL81437, RE78690, SE501342, SE501387, TY24485, TY6750, TY6779, TY6792. (Part No: 112390)		$92.00
Alternator - 12 volt, 65 amp. For tractor models (482 1979-83 with dsl eng.), (499 1973-79 with 219 eng.), (499, 699 1973-79 with 329 eng.), (6000 1975-79 with 219 dsl). Replaces 8EM2009. (Part No: 117399)		$280.00
Alternator - 12 volt, 51 amp. For tractor models (6000 1975-79 with 219 dsl), (600, 600A 1973-78 with 152 dsl), (700, 734 1973-78), (3020 1969-72 with 240 gas or 270 dsl), (4020 1969-72 with 360 gas or 404 dsl), (4320, 4520, 4620 1969-73 with 404 dsl), (5020 1966-72 with 531 dsl), (6030 1970-77 with 531 dsl), (7020 1971-75 with 404 Turbo dsl), (7520 1971-75 with 531 dsl), (880 1970-80 with 180 135 gas or 202 dsl), (2250 1975-78 with 225 chrysler gas), (2270 1975-78 with 219 dsl), (2280 1975-85), (2320 1981-83 with 219 dsl 225 chrysler gas), (2420 1975-85 with 219 dsl 225 chrysler gas), (3430, 3830 1985-92). Replaces RA12NJD604. (Part No: 112112)		$168.00
Alternator - 12 volt, 90 amp. For tractor models (7445 1987-94 with 359 dsl), (5720 1982-86 with 466 dsl), (5730 1986-92 with 466 dsl or 619 dsl), (5820 1982-86 with 619 dsl), (5830 1986-92 with 466 dsl), (583 1986-92 with 619 dsl), (4040 1981-82 with 404 dsl), (4050 1983-88 with 359 466 dsl), (4240 1981-82 with 466 dsl), (4250 1983-88 with 466 dsl), 4350, (4440 1981-82 with 466 Turbo dsl), (4450 1983-90 with 466 dsl), (4640 1981-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (8440 1979-82 with 466 dsl), (8630 1978-80 with 619 dsl), (8640 1979-82 with 619 dsl). Replaces 100211-0290, 100211-0290, AR87205, AR93448, AT103789, SE501363, TY26050, TY6621. (Part No: 110571)		$171.90
Alternator - 12 volt, 72 amp. For tractor models (5200 1974-77 with 404 dsl), (5400 1974-77 with 531 dsl), 5420, (5440 1977-82 with 404 dsl), (5460 1977-82 531 dsl), (5720 1982-86 with 466 dsl), (5820 1982-86 with 619 dsl), (4020 1971-72 with 360 gas or 404 dsl), (4030 1977-78 with 329 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4230 1977-78 with 404 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4320 1969-73 with 404 dsl), (4430 1977-78 with 404 dsl), (4440 1978-82 with 466 Turbo Dsl), (4450 1983-90 with 466 dsl), (4620 1969-73 with 404 dsl), (4630 1977-78 with 404 dsl), (4640 1978-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (6030 1970-77 with 531 dsl), (7520 1971-75 with 531 dsl), (8630 1975-78 with 619 dsl). replaces 1100490, 1102932, 1100287, 11013128, 1102926, 1105174, SE501382, TY6600, TY6772. Comes with single groove pulley. If you need a double groove, reuse your old one or order R81507 (Part No: 110572)		$102.00
Alternator - 12 volt, 95 amp. For tractor models 6100, 6200. Replaces 9120060041. (Part No: 117388)		$130.00
Alternator - 12 volt, 55 amp. For tractor models (1030 1970-82 with 2.7L dsl), (1130 1970-82), 1350, 1550, (1630 1973-82), 1750, 1750V, 1850, 1850F, 1850V, 1950, 1950F, 2155, 2250, 2250F, 2355, 2450, 2450F, (2555 1987-92 with 239 dsl), 2650, 2650F, (2750 1983-86 with 239 dsl), (2755 1987-92 with 239 dsl), (2840 1977-79 with 329 dsl), 2850, (2855N 1987-93 with 239 dsl), (2950 1983-86 with 359 dsl), (2955 1987-92 with 359 dsl), (3040 1980-84), 3050, (3150 1985-87 with 359 dsl), 3350, 3640, (830 1972-75 with 3 cyl eng.), 840, (930 1972-79), (2150 1982-87 with 179 dsl), (2155 1987-92 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl), (2355 1986-92 with 239 dsl), (2550 1982-87 with 239 dsl). Replaces 0120488218, 0120488267, 0120488217. (Part No: 113332)		$110.99
Alternator - 12 volt, 35 amp. For tractor models (1020 1972-75 with 2.7L dsl), (1030 1970-82 with 2.7L dsl), (1120 1970-82), 1530, (1830 1973-82), (2020, 2030 1970-79), 2040, (2120 1970-79), (2130 1970-79), (2840 1977-79 with 329 dsl), (3120 1970-77), (820 1968-72 with 3 cyl eng), (920 1970-75 with external regulator), (2030 1971-75 with 219 gas dsl), (2040 1972-79 with 152 dsl), (2940 1980-84 with 359 dsl). Replaces 0120300562, 0120300535, AR62401, TY6605, 0-120-300-535, 0-120-300-562, 0-120-300-538, 0-120-300-539, 294390700, 220-351A, 220-351, 13194. (Part No: 113013)		$150.99
Alternator - 12 volt, 37 amp. For tractor models (2440 1976-82 with 219 dsl), (2630 1974-76 with 276 dsl), (2640 1976-82 with 276 dsl), (1020 1965-73 with 135 gas or dsl), (1520 1968-73 with 164 gas dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 180 gas 202 dsl), (2030 1971-75 with 219 gas dsl). Replaces AT21618, AT21619, A12NJD452, A12NJD454, SE501350, TY1428, 11030, 11057. (Part No: 115849)		$95.30
Alternator - Single Pulley, call if you need a double pulley. 12 volt, 55 amp. For tractor models 1030, 1040, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1850N, 1950, 1950N, (2020, 2120, 2250, 2450, 2650, 2850 euro edition), 2040, 2040S, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2650N, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3150, 3350, 3640, 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 840, 940. (Part No: 113014)		$126.00
Alternator - 12 volt, 78 amp. For tractor models (4000, 4020 SN# 263481 and up with air), 4030, 4230, 4240, 4430, 4440, 4630, 4640, 4840, (4040 with out cab), (4050, 4250, 4450, 4650, 4850 with roll guard), (4620 SN# 014118 and up), (6030 with air), (7020 SN# 002264 and up), (8430 up to SN# 006278), (8630 up to SN# 008619). Replaces 8134664, 8982775005, JR775005, 10463060, 10463397, 10495429, 10497077, 1100257, 1101244, 1101298, 1100241, 1100246, 1100269, 10497074, 1101308, 1101241, 1101299, 1100237, 1100259, 1100270, 1100287, 1105047, 1105048, 1105049, 1101242, 1101245, 1101279, 1105427, 1105492, 1105495, 1105604, 1105606, 1105634, 1105648, 1105650, 1105673, 1105692, 1105426, 1105496, 1105632, 1105651, 1105425, 1105494, 1105620, 1105628, 1105629, 1105706 (Part No: 109805)		$104.00
Alternator - 12 volt, 72 amp. For tractor models (3300 with 219 DH03 or GH01 engine), (4000 up to SN# 263481 with air), (4020 SN# 201000-263481 with air), 4400, 55, 6622, 7700, (4520 with air), (4620 up to SN# 014117 with air), (6600 SN# 206201 and up), (6602 SN# 212801-353900), (6620, 7720, 8820 up to SN# 600000), (7020 up to SN# 002263), (7440 up to SN# 1000), (9910 SN# 3056 and up), (9920 up to SN# 380, (9940 up to SN# 1500). Replaces TY6603, AR43989, AH10552D. (Part No: 113321)		$152.40
Alternator - For John Deere Models: 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7210, 7410, 7510, 8560, 8570, 8760, 8770, 8870, 8960, 8970 (Part No: 110570)		$146.99
Alternator - For tractor models 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9400, 9400T, 9420, 9420T, 9520, 9520T. Replaces RE46608, SE501380, TY6762. (Part No: 113601)$126.00
Alternator - For compact models 1050 and 1450. Also replaces SE501365. (Part No: 118571)$92.00
Alternator - For models 1010, 1520, 2030, 2640. Also replaces SE501350. (Part No: 115849)$95.30
Alternator - New Motorola type alternator. It is 12-volt, 51 Amp. Note, the orange wire is for dash light and the purple wire is for keyed ignition. The large stud connection is battery positive. Replaces AR40420, AR47937, AT21229, AR38458, TY26016, TY1427, TY26016, TY26017, Dixie-924, RA12NJD604, RA12N55JD6, RA12N55JD7, RA12N600D, SE501357, TY1430, 10A31126, 110-157, 110157, 11039, 1400-0568, 36-7365, 49130, 7365, 8AR2006, 8AR2015K, 90-05-9077, AMO0071 (Part No: 117621)		$151.00
Alternator, 12 Volt - 65 amp, Motorola type, has AC post, Ign Lmp post, B+ post. Regulator includes both IGN and Sense+ bolts. For tractor models 210C, 310C, 315C, 400G, 410B, 410C, 440D, 444D, 444E, 450G, 455G, 482C, 510B, 510C, 540D, 544D, 544E, 550, 550G, 555, 555G, 610B, 610C, 624E, 640D, 643, 643D, 644D, 644E, 644ER, 650G, 710B, 710C. (Part No: 117399)		$280.00
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 111377)$78.99
Alternator - Bosch (12879) -
  • For John Deere tractor models 5065M, 5075M, 5076E, 5078E (with Cab), 5082E, 5083E (with Cab), 5083EN (with Cab), 5085E (with Cab), 5085M, 5090E, 5090EH, 5093E (with Cab), 5093EN (with Cab), 5095M, 5095MH, 5101E, 5101EN (with Cab), 5105M (with Cab), 5105ML (with Cab), 5225 (with Cab), 5325 (with Cab), 5325N (with Cab), 5425 (with Cab), 5425N (with Cab), 5525 (with Cab), 5525N (with Cab), 5603, 5625 (with Cab), 5725 (with Cab), 6100D (with Cab), 6110D (with Cab), 6115D (with Cab), 6125D (with Cab), 6130D (with Cab), 6140D (with Cab)< li>
  • Replaces John Deere OEM number RE205273< li>
  • Replaces Bosch manufacturer number 0124325155, 0986020860< li>
  • Replaces Alternator number 12879< li>
  • Replaces manufacturer number 400-24256< li>
  • Volts: 12< li>
  • Amps: 90< li>
  • Rotation: CW< li>
  • Pulley: 8 Groove< li> < UL> (Part No: 189304)
$185.00
Alternator - Bosch Style -
  • For John Deere tractor models 840, 940, 1030, 1040, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2040, 2040S, 2120, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3150, 3350, 3640, 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L< li> < UL> (Part No: 176298)
$170.00
Alternator - Bosch Style -
  • For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 940, 1040, 1140, 1550, 1750, 1850, 1850N, 1950, 1950N, 2040S, 2140, 2250, 2355, 2450, 2555, 2650, 2755, 2850, 2955, 3040, 3050, 3055, 3140, 3155, 3255, 3350, 3640, 3650, 6100, 6200, 6300, 6400, 6500, 6506, 6600, 6800, 6900< li>
  • Replaces John Deere OEM number AL81437< li>
  • Voltage: 12< li> < UL> (Part No: 176301)
$154.22
Alternator - Bosch Style (11907) -
  • For John Deere Construction & industrial models 260E, 310E, 444K, 524K, 524KII, 524L, 544K, 544L, 620G, 620GP, 624K, 624L, 644K, 670G, 670GP, 672G, 672GP, 724K, 744K, 770G, 770GP, 772G, 772GP, 803M, 803MH, 824K, 844K, 844KII, 850K, 853M, 853MH, 859M, 859MH, 870G, 870GP, 872G, 872GP, 903K, 903M, 909K, 909M, 909MH, 950K, 953K, 953M, 953MH, 959K, 959M, 959MH, 1050K, 1270E (s n 002501-003008), 1270E (s n 003009-003173), 1470E (s n 001801-later), 1470E (s n 001916-001953)< li>
  • Replaces John Deere OEM number RE558679, RE538907, SE502564< li>
  • Replaces manufacturer number 0 124 655 080, 0 124 655 191, 0 124 655 192< li>
  • Amps: 13< li>
  • Volt: 24< li>
  • Pulley: 8 Groove< li>
  • Rotation: CW< li> < UL> (Part No: 169661)
$335.00
Alternator - Bosch Style (12151) -
  • For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1850, 1850N, 1950, 2040, 2040S, 2140, 2250, 2355, 2450, 2555, 2650, 2650N, 2755, 2850, 2855N, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6100, 6200 (s n 116316-earlier), 6300 (s n 116316-earlier), 6400 (s n 116316-earlier), 6500 (s n 116316-earlier), 6506, 6600, 6605, 6800, 6900< li>
  • Replaces John Deere OEM number TY6779, AR187623, AZ38462, AL60033, AL67176, AL78690, TY6778, TY6792, AL81437< li>
  • Replaces Bosch manufacturer number 0-120-484-012, 0-120-484-002, 0-120-484-003, 0-120-484-016, 0-120-484-020< li>
  • Replaces manufacturer number 11.201.989, 11.203.332, IA 0989, IA 1154, AAK4321, AAK5197, 9-513-160, 282-112, 220-348, 220-348A< li>
  • Bosch Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 95< li>
  • Regulator: Internal < li>
  • Without pulley< li>
  • For Voltage Regulator use Item #: 123598< li> < UL> (Part No: 110799)
$103.00
Alternator - Bosch Style (12370) -
  • For John Deere tractor models 5620, 5720, 5820, 6010, 6110, 6120, 6210, 6220, 6310, 6310S, 6320, 6320L, 6410, 6410S, 6420, 6420L, 6510, 6510S, 6520, 6520L, 6610, 6620, 6810, 6820, 6910, 6920, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL111676, AL114093< li>
  • Replaces Bosch manufacturer number 0-123-512-500< li>
  • Replaces manufacturer number 12370, 220-5015, 11.203.204, 11.203.862, 11.204.152< li>
  • Bosch Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 115< li>
  • Regulator: Internal< li>
  • Without pulley< li> < UL> (Part No: 120122)
$201.00
Alternator - Bosch Style (12379) -
  • For John Deere tractor models 5620, 5720, 5820, 6010, 6020, 6110, 6110L, 6120, 6120L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6310, 6310L, 6320, 6320L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6505, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6610, 6615, 6620, 6715, 6810, 6820, 6910, 6920, 7420, 7520< li>
  • Replaces John Deere OEM number RE204426, AL111675, AL114092< li>
  • Replaces Bosch manufacturer number 0-123-315-501< li>
  • Replaces manufacturer number 12379, 220-5190, IA 1052, LRA01860, 90-15-6389< li>
  • Bosch Style < li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 90< li>
  • Regulator: Internal < li>
  • Includes pulley< li> < UL> (Part No: 156113)
$129.00
Alternator - Bosch Style (12493) -
  • For John Deere Construction & industrial models 444, 524, 544, 624, 644, 670, 672, 724, 744, 770, 772, 824, 844, 870, 872< li>
  • Replaces John Deere OEM number AT300167, AT387574, SE501838< li>
  • Replaces Bosch manufacturer number 0-124-655-013, AL5051X< li>
  • Replaces manufacturer number 220-5290, 12493, 90-15-6467< li>
  • Bosch Style< li>
  • Voltage: 24< li>
  • Rotation: Clockwise< li>
  • Amperage: 100< li>
  • Regulator: Internal< li>
  • Includes pulley< li> < UL> (Part No: 119079)
$315.00
Alternator - Bosch Style (12780) -
  • For John Deere tractor models 6020, 6105M, 6115M, 6120, 6120L, 6125M, 6130, 6140M, 6140R, 6150M, 6150R, 6170M, 6215, 6220, 6220L, 6230, 6320, 6320L, 6330, 6415, 6420, 6420L, 6430, 6515, 6520, 6520L, 6534, 6615, 6620, 6715, 6820, 6920, 7130, 7230, 7330< li>
  • Replaces John Deere OEM number AL166645< li>
  • Replaces Bosch manufacturer number 0-124-325-166< li>
  • Replaces manufacturer number 12780, 220-5711, LRA03443, ALT10594< li>
  • Bosch Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 90< li>
  • Regulator: Internal< li>
  • Without pulley< li> < UL> (Part No: 119993)
$223.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: 178026)		$14.00
Alternator - Delco Style (7127-SER) -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 63 Self Exciting< li>
  • Clock Position: 12< li>
  • Regulator: Internal< li>
  • 1-Wire System< li>
  • Pin Style R-Terminal< li> < UL> (Part No: 164231)
$98.00
Alternator - Denki Style (10944) -
  • For John Deere tractor models 670, 770, 790, 870, 970, 990, 1070, 2305, 2320, 2520, 4010, 4100, 4110, 4115< li>
  • Replaces John Deere OEM number AM877957, AM880339< li>
  • Rotation: Clockwise< li>
  • Volts: 12< li>
  • Ams: 35< li>
  • Pulley Grooves: 1< li> < UL> (Part No: 168465)
$81.00
Alternator - Denso Style (12080) -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5215, 5220, 5300, 5303, 5310, 5315, 5315F, 5315V, 5320, 5400, 5500< li>
  • Replaces John Deere OEM number RE42778, RE72915, SE501379, RE729151, TY6760< li>
  • Replaces Denso manufacturer number 100211-4700, 100211-4701.< li>
  • Replaces manufacturer number 12080, 290-182< li>
  • Denso Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 40< li>
  • Regulator: Internal < li>
  • Includes pulley< li> < UL> (Part No: 112295)
$130.00
Alternator - Denso Style (12193) -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810 (all less cab)< li>
  • Replaces John Deere OEM number RE34888, TY6763< li>
  • Replaces Denso manufacturer number 101211-5030< li>
  • Replaces manufacturer number 12193, 290-435, 90-29-5301< li>
  • Denso Style< li>
  • Voltage: 12< li>
  • Amperage: 90< li>
  • Regulator: Internal< li>
  • Includes pulley< li> < UL> (Part No: 127277)
$139.30
Alternator - Denso Style (12194), Denso, 101211-7130, RE34890 -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610 (all with cab)< li>
  • Replaces John Deere OEM number RE34890, TY6782, RE60745, SE501380< li>
  • Replaces Denso manufacturer number 101211-7130, 9761219-713< li>
  • Replaces manufacturer number 12194, 290-436, 90-29-5303< li>
  • Denso Style< li>
  • Voltage: 12< li>
  • Amperage: 120< li>
  • Regulator: Internal< li>
  • Includes pulley< li> < UL> (Part No: 127278)
$158.00
Alternator - Denso Style (12353) -
  • For John Deere tractor models 5403, 5410, 5415, 5420, 5420N, 5510, 5510N, 5515, 5515F, 5515V, 5520, 5520N, 5615, 5715< li>
  • Replaces John Deere OEM number RE70268, RE72916, TY25240< li>
  • Replaces Denso manufacturer number 101211-1130, 101211-1131< li>
  • Replaces manufacturer number 12353, 290-401, 90-29-5423< li>
  • Denso Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 40< li>
  • Regulator: Internal< li> < UL> (Part No: 119996)
$114.00
Alternator - Magneton (205-245) -
  • For John Deere tractor models 240, 250< li>
  • Compatible with John Deere Construction & industrial models 4400, 4500< li>
  • Replaces Alternator number 205-245< li>
  • Replaces manufacturer number 443-113-516-760, 9-516-760< li>
  • Style: Magneton< li>
  • Voltage: 12< li>
  • Rotation: < li>
  • Amperage: 55< li>
  • Regulator: Internal< li>
  • Pulley: Not Included< li> < UL> (Part No: 189319)
$148.00
Alternator - Motorola Style (7376) -
  • For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Combine(s) 45, 55, 95, 105, 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 7722, 8820< li>
  • Compatible with John Deere Harvester(s) 484, 499, 699, 7440, 9910, 9920, 9940< li>
  • Compatible with John Deere Engine(s) 362< li>
  • Replaces John Deere OEM number AH105520, AH80094, AH93616, TY6603, AR50909, AR52077, AH80093< li>
  • Replaces Prestolite manufacturer number 110-115, 110-266< li>
  • Replaces manufacturer number 10-115, 8MR2008P, 8MR2009P, 8MR2010P, 8MR2012P, 8MR2012PS, 7376, 210-145, 90-05-9063< li>
  • Motorola Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 72< li>
  • Regulator: Internal < li>
  • Without pulley< li> < UL> (Part No: 117401)
$133.00
Alternator Mounting Bracket -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Steel< li>
  • 6.1mm Thick< li>
  • (2) 10.2mm Unthreaded Holes< li>
  • (1) 10.9mm x 41mm Slot< li>
  • (1) 10.9mm x 53.5mm Slot< li>
  • (1) M10-1.5 x 90mm Bolt< li>
  • (1)M10-1.5 Nut< li>
  • (4) M10 Flat Washers< li>
  • (1) M10 Lock Washer< li> < UL> (Part No: 164227)
$16.50
Alternator - Niehoff Style (7575), Remanufactured, AR94100 -
  • For John Deere tractor models 8450, 8650, 8850< li>
  • Replaces John Deere OEM number AR94100, TY6646< li>
  • Replaces manufacturer number 211-254, 7575, A130551Z, A1-305, N1114, N1114-1, 90-07-1064< li>
  • Niehoff Style< li>
  • Voltage: 12< li>
  • Amperage: 110< li>
  • Regulator: Internal< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 204210)
$1125.01
Alternator Pulley -
  • For John Deere tractor models 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420, 6420L, 6420S, 6520L, 6615, 6715, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL166836< li> < UL> (Part No: 167755)
$47.00
Alternator Pulley -
  • For John Deere tractor models 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6510L, 6510S, 6605< li>
  • Replaces John Deere OEM number AL166836< li> < UL> (Part No: 167756)
$47.00
Alternator Pulley -
  • For John Deere tractor models 6120, 6320, 6320L, 6420, 6420L, 6520L, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL166835, AL166836< li> < UL> (Part No: 167787)
$52.61
Alternator & Starter (Delco high torque) Conversion Kit - 24V to 12V, Remanufactured -
  • For John Deere tractor models 3010, 3020, 4010, 4020 (all diesel)< li>
  • 24 volt to 12 volt alternator conversion kit includes: Remanufactured 12V Delco high torque starter, new 12V Delco alternator, solenoid, wire cable kit< li>
  • For new Bosch starter conversion kit use Item #: 159702< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 203384)
$880.01
Alternator & Starter (Delco style) Conversion Kit - 24V to 12V -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Alternator: 12 Volt, 63 Amp, 1 Wire, Internal Regulator, Delco Style< li>
  • Starter: 12 Volt, Clockwise Rotation, 10 Tooth, Delco Style 28MT< li>
  • Solenoid: 12 Volt, Battery Terminal, Motor Terminal, Ignition Terminal, Switch Terminal, Grounded Base< li>
  • For conversion kit with Bosch starter use Item #: 120547< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 159702)
$420.00
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7 8 inches wide, 1-1 2 inch offset, 8-1 4 inch from farthest end of slot to center of mounting hole, 3-3 4 inch slot length, 3 8 inch mounting hole. (Part No: 173326)		$27.00
Alternator - Valeo (11737) -
  • For John Deere tractor models 3320, 3520, 3720< li>
  • Replaces John Deere OEM number MIA10222< li>
  • Replaces Alternator number 11737< li>
  • Replaces manufacturer number 2655641, 600140< li>
  • Style: Valeo< li>
  • Voltage: 12< li>
  • Rotation: < li>
  • Amperage: 75< li>
  • Regulator: Internal< li>
  • Pulley: Single Groove V-Belt< li> < UL> (Part No: 189315)
$190.00
Ammeter, Black - Black ammeter for John Deere. Fits A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720 gas or diesel, 730 gas or diesel, 820, 830. Replaces AF2749R, AM1864T (Part No: 150259)		$22.00
Battery Box Base Tray - Left Hand -
  • For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR47940< li>
  • Fits Left Hand Side< li> < UL> (Part No: 167406)
$58.00
Battery Box Base Tray - Right Hand -
  • For John Deere tractor models 3020, 4000, 4020, 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR47939< li>
  • Fits Right Hand Side< li> < UL> (Part No: 167407)
$58.00
Battery Box Cover -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number R151467, R124686< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 165243)
$385.00
Battery Box Cover -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE48981< li> < UL> (Part No: 165264)
$295.00
Battery Box Cover -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2350, 2355, 2550, 2555, 2855N< li>
  • Replaces John Deere OEM number L36958< li>
  • Left Hand< li>
  • For Battery Box Cover, Right Hand use Item #: 176599< li> < UL> (Part No: 176598)
$55.32
Battery Box Cover -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2350, 2355, 2550, 2555, 2855N< li>
  • Replaces John Deere OEM number L36965< li>
  • Right Hand< li> < UL> (Part No: 176599)
$51.00
Battery Box Cover - Left Hand -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2855, 2855N< li>
  • Replaces John Deere OEM number AL58119, AL34470< li>
  • Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 120109)
$131.00
Battery Box Cover - Right Hand -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2855, 2855N< li>
  • Replaces John Deere OEM number AL58118, AL34473< li>
  • Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 120108)
$132.90
Battery Box - Green -
  • For John Deere tractor models A (s n 584000-later), G (s n 26000-later)< li>
  • Replaces John Deere OEM number AA4841R, AA3954R, AA4941R< li>
  • Stamped Center Line< li>
  • 15-1 2" X 11-3 4" X 10-1 4"< li>
  • Mounts Under Seat< li>
  • Complete box - includes tray, upper & lower bushing< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112551)
$197.00
Battery Box, Right-Hand -
  • For John Deere tractor model 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number AR32499, AR34820, AR40209< li>
  • Primed< li>
  • Length: 23"< li>
  • Width: 16"< li>
  • Height: 5.3"< li> < UL> (Part No: 172632)
$83.00
Battery Box Step - Left Hand -
  • For John Deere tractor models 2950, 2955 (s n 765516-earlier), 3040 (s n 430000-later), 3055, 3140 (s n 430000-later), 3150, 3155, 3255< li>
  • Replaces John Deere OEM number AL57560< li>
  • Fits Left hand side< li> < UL> (Part No: 189359)
$78.00
Battery Box Support, Front - Left Hand -
  • For John Deere tractor model 4020 (s n 200999-earlier w Power Shift Transmission)< li>
  • Replaces John Deere OEM number AR32333< li>
  • Left Hand Front Support< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 111261)
$39.50
Battery Box Support, Front - Right Hand -
  • For John Deere tractor model 4020 (s n 200999-earlier w Power Shift Transmission)< li>
  • Replaces John Deere OEM number AR34397< li>
  • Right Hand Front Support< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 111262)
$38.00
Battery Box Support, Front - Right Hand -
  • For John Deere tractor model 4020 (s n 200999-earlier w Syncro-Range Transmission)< li>
  • Replaces John Deere OEM number AR32501< li>
  • Right Hand Front Support< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 111263)
$30.76
Battery Box Support, Rear - Right Hand -
  • For John Deere tractor model 4020 (s n 200999-earlier w Power Shift Transmission)< li>
  • Replaces John Deere OEM number AR32334< li>
  • Right Hand Rear Support< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 111264)
$33.76
Battery Cable - Battery Cables: A to SN# 584000, B to SN# 200999, 0 gauge, length 28", terminal type 1-3. (Part No: 184450)		$35.79
Battery Cable - For tractor models A to SN# 584000 up, B SN# 201000 up SN# 26001 up, 50, 60, 70D, 520, 620, 720D & 730D with cranking eng. Length 64", terminal type 1-3. (Part No: 173781)		$36.50
Battery Cable - Battery Cables & Straps~ 5020D to SN# 25000 up. 2 guage, Battery to Battery length 9-1 4, term type CO. For 5020 (Part No: 178300)		$20.90
Battery Cable - Battery Cables: 70, 720G, 1 guage, length 73, terminal type 1-3*. For tractor models 70, 720. (Part No: 172339)		$47.80
Battery Cable - Battery Cables. 0 gauge, length 12, terminal type 2-3*. For tractor models 320, 40, 420, M. (Part No: 179707)		$23.50
Battery Cable - Battery Cables: 530, 0 guage, length 70, terminal type 1-4*. For tractor models 530. (Part No: 172339)		$47.80
Battery Cable - Battery Ground Straps. 3010, 3020, 4010, 4020 Gas, left hand on diesel. 1 gauge, length 10 inches, terminal type standard. For 3010, 3020, 4010, 4020. (Part No: 183814)		$17.42
Battery Cable - Battery Cables. 300D, 3020D, 4010D, 4020D right hand. Only on diesels. 2 guage, length 61, terminal type 1-3+. For 300D, 3020, 4010, 4020 (Part No: 172328)		$37.30
Battery Cable - For tractor models 3010, 3020, 4010, 4020 left hand, only on diesels. 2 guage, length 38, terminal type 1-3+. (Part No: 173136)		$19.00
Battery Cable - Battery Cables. 5010D and 5020D positive 2 gauge, length 45 inches, terminal type 1-3+. For tractor models 5010, 5020. (Part No: 178288)$26.26
Battery Cable - 2 used for the diesel. 2 guage, length 71, terminal type 1-3+. For tractor models 2510. (Part No: TP-AR38359)$47.53
Battery Cable - Battery Cables. 330, 430, 440, 1 guage, length 15, terminal type 1-4*. For mODELS: 330, 430, 440. (Part No: 176350)		$21.00
Battery Cable - Battery Cables. 1010, 1 guage, length 43, terminal type 1-3*. For tractor models 1010. (Part No: 172318)$25.00
Battery Cable - For model 2010, SN# 31003 up, 0 guage, length 52, terminal type 103*. (Part No: 185400)$32.00
Battery Cable - Battery Cables. 820 & 830 Mannhiem, 2020 & 2240 with swing batt. 1020, 1520 & 2020 with 41 & 71 amp. batt. 4 guage, length 25, terminal type 2-3+. For 1020, 1520, 2020, 2240, 820, 830 (Part No: 173478)		$22.60
Battery Cable - Battery Cables. 1020, 1520, 2020 & 2030 with 140 amp. batt. 2 guage, length 29, terminal type 1-3*. For 1020, 1520, 2020, 2030 (Part No: 115769)		$8.76
Battery Cable - Battery Ground Straps. 2510, 3010D, 3020D, 4010D, 4020D to SN# 2T90999, 5010D to SN# 3T7999. 1 guage, length 10, terminal type Std. For 2510, 3010, 3020, 4010, 4020, 5010 (Part No: 172364)		$14.26
Battery Connect - Battery Cables & Straps~ 5010D, 5020D to SN# 24999, 2 guage~Battery to Battery length 8. Term type C1. For 5010, 5020 (Part No: 168986)		$23.26
Battery Cover - Left Hand with Step For 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955. OEM# AR65025 (Part No: 103865)		$78.00
Battery Cover - Left Hand -
  • For John Deere tractor model A (s n 477000 - 583999)< li>
  • Replaces John Deere OEM number AA2000R< li>
  • Left Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For Battery Cover - Right Hand use Item #: 110152< li> < UL> (Part No: 110153)
$44.95
Battery Cover - Right Hand -
  • For John Deere tractor model A (s n 477000-583999)< li>
  • Replaces John Deere OEM number AA1999R< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Right-Side< li> < UL> (Part No: 110152)
$48.50
Battery Door - For 820 (3 Cyl), 830 (3 Cyl), 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Part No: 104081)		$33.20
Battery Ground Strap - For tractor models 1020, 1520, 2020, 2340, 3010 diesel Std. right hand to SN# 1T19799, 3010D row util~ 3020D row util. right hand to SN# 1T67999, 4010D Std. right hand to SN# 2T20199. 1 guage, length 6, terminal type Std. (Part No: 115790)		$7.80
Battery Hold Down -
  • For John Deere tractor models 50, 60 (s n 6017061-later & Standard s n 6043000-later), 520, 530, 620, 630< li>
  • Replaces John Deere OEM number AA6597R, AB4650R, AA7338R< li>
  • Inside Length x Width: 9-1 4" x 7-1 8"< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 126467)
$58.00
Battery Hold Down Bolt -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430< li>
  • Replaces John Deere OEM number R50819< li>
  • Sold Individually< li> < UL> (Part No: 170412)
$4.20
Battery Hold Down Clamp -
  • For John Deere tractor models 70, 720, 730 (Diesel with Pony Motor)< li>
  • Replaces John Deere OEM number AF3819R, AF2079R< li>
  • For 6 Volt Battery< li>
  • 7-1 4" Wide< li>
  • 9-3 16" Length< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 126466)
$58.00
Battery Hold Down Clamp -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4520, 4620< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 510, 570< li>
  • Replaces John Deere OEM number R40423< li> < UL> (Part No: 151928)
$11.10
Battery Strap - Battery Ground Straps. A to SN# 676599, B to SN# 286909, G to SN# 51142, 2010. 1 guage, length 13, terminal type Std+. For A, B, G (Part No: 184831)		$18.50
Battery Strap - Battery Ground Straps. A to SN# 676000 up, B SN# 286910 up, G SN# 51143 up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 1 guage, length 6-1 2, terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Part No: 115790)		$7.80
Battery Strap - Battery Ground Straps. 40, 320, 330, 420, 430, 440, 1010, 2010 crawler. 1 guage, length 9, terminal type Std+. For 1010, 2010, 320, 330, 40, 420, 430, 440 (Part No: 179704)		$16.76
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)$35.98
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)$53.81
Blower Motor - Stay cool by getting your air conditioning up and running. This Blower Motor is - double shaft - 12 volt single speed 2 wire motor with 5 16 inch shafts. Tractors: 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430 4WD, 8630. Replaces 916005, BM20013, RE223623, AR62497 (Part No: 109375)		$56.00
Blower Motor - Note, some John Deere applications require 2 R85234 orings to fit in the housing. These o-rings are not available though Yesterday's Tractors. This Blower motor is a double shaft, 12 volt single speed 2 wire motor with 3 8 inch shafts. Tractors: 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 4WD, 8440, 8450, 8630, 8640, 8650, 8850. Combine: 484, 4425, 6620, 6622, 7440, 7445, 7450, 7455, 7720, 7722, 8820, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976. Backhoe: 310C, 315C, 410B, 510B, 510C. Wheel Loader: 544E, 624E. Forage Harvester: 5720, 5730, 5820, 5830. Sprayer: 6100, 6600, 6700. Windrower: 2320, 2420, 3430, 3830. Replaces R82005GV, RE251028, RE25160, AR82005 (Part No: 110507)		$62.00
Blower Resistor -
  • For John Deere tractor models 5083EN, 5093EN, 5101EN, 5310N, 5320N, 5325N, 5400, 5400N, 5420N, 5425N, 5500, 5500N, 5510N, 5520N, 5525N, 6105M, 6110, 6110M, 6115M, 6120, 6120M, 6125M, 6130M, 6140J, 6140M, 6145M, 6150M, 6155J, 6155M, 6170M, 6195M, 6200, 6210, 6215, 6220, 6230, 6300, 6310, 6310S, 6320, 6320L, 6330, 6400, 6405, 6410, 6410S, 6415, 6420, 6420L, 6430, 6500, 6510S, 6520L, 6605, 6615, 6715, 7130, 7220, 7230, 7320, 7330, 7420, 7505, 7520< li>
  • Compatible with John Deere Construction & industrial models 3200, 3215, 3220, 3400, 3415, 3420< li>
  • Replaces John Deere OEM number AL152449, AL224589, AL111591, AL77301< li> < UL> (Part No: 168674)
$50.00
Blower Wheel - Blower wheel, counterclockwise - 4-1 4 inch diameter wheel, 3 8 inch shaft. Offset - 2 1 4 inches and 3 1 2 inches. Replaces BW212, 539018R1, 7025877, D5NN18459A, 917540, R81111, AMR81111, R65832. For the following applications: 2040, 4050, 4055, 4250, 4255, 4450, 4455, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8440, 8450, 8640, 8650, 8850. Early 2750, 2950. Late 4030, 4040, 4230, 4430, 4440, 4630, 8430, 8630. With SN#430000-500462: 1640, 2040, 2740S, 2140, 3040, 3140. With Cab SN# before 167111: 4640, 4840. (Part No: 163264)		$25.26
Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Part No: 164460)		$30.60
Circuit Breaker, 10 Amp -
  • For John Deere tractor models 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 8430 (Model Year 1974-1981), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Drill(s) 770, 780, 785< li>
  • Replaces John Deere OEM number AR70052< li>
  • Volts: 12< li>
  • Amps: 10< li> < UL> (Part No: 167962)
$7.86
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1 2 inches diameter. (Part No: 182583)$28.99
Coil, 6V - Distributor Coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50(after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M. Replaces AM373T. (Part No: 105281)		$14.26
Coil - American Made - American Made Coil For Pony Engine, 2 Cylinder Diesel with starting engines. (R0918A) (Part No: 178296)$86.00
Coil Bracket - This distributor coil bracket is used for tractor models: A, B, G, 50, 60, 70, 520, and 530. (Part No: 110868)		$15.50
Coil, Foreign - Foreign Made Coil For Pony Engine, 2 Cylinder Diesel with starting engines. (R0918) (Part No: 101909)$47.99
Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models A, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BO, BR, BW, BW40, BWH, D, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, W111, W113, (R with pony engine). Replaces AR12006, X5700, X5700B, X5700C. (Part No: 111196)		$87.00
Combination Switch - Fits John Deere - 70, 720 (Diesel Pony start), 80, 820 2 cylinder (with Pony Start) Replaces: AF2065R, AF2460R (Part No: 179442)		$97.00
Combination Switch Without Lever - 24 Volt -
  • For John Deere tractor models 720, 730 (diesel electric start only with 4 lights), 840 (electric start only with 4 lights)< li>
  • Replaces John Deere OEM number AR20444< li>
  • 24 Volt Switch - 30 Amp Rating< li>
  • For use on tractors with 4 head lights - 24 Volt Electric Start ONLY< li>
  • Does not work on pony start cranking engine< li>
  • 5 Positions< li>
  • 8 spade screw terminals< li> < UL> (Part No: 126170)
$87.00
Combo Switch Lever - Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For tractor models 1020, M, 50, 520, 530, 60, 620, 630, 70, 720, 730, 320, 330, 420, 430, 435, 440, 1520, 2020, 8430, 8630, 40. (Part No: 105695)		$6.50
Compressor, 12 volt - Remanufactured, with clutch, 1 groove 5.58" pulley. For tractor models (4400, 7700 1975 and up), (4420 SN# up to 610100), 4430, 4440, 4520, 4630, 4640, 4840, 5020, 6030, 6600, (6620, 7720, 8820 up to SN# 600000), 7020, 7520, 8430, 8440, 8630, 8640. *** NIS *** (Part No: 109093)		$416.90
Condenser - For tractor models (A, AO, AR, B, BN, BNH, BW, BWH all styled with distributor SN# XD100 and up) (Part No: 172664)		$6.16
Condenser - Condenser. Repalces IBB2042-SS-1.For tractor models using Presto-Lite Distributor. Replaces AT14468 for Tractors using Delco Distributors and replaces AR12000, AT14873 or AT15929 For Wico Distributors. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W. Balers 40, 45, 55, 65, 95, 105. Combines 99, 299. Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Part No: 111194)		$5.46
Condenser - Pony Motor Distributor -
  • For John Deere tractor models 70, 80, 720, 730, 820, 830< li>
  • Replaces John Deere OEM number X9263< li>
  • Two required per engine< li> < UL> (Part No: 124003)
$19.00
Condenser - Wico X Magneto -
  • For John Deere tractor models 1010, 1020, 2010, 2020, 2510, 2520, 3020, 3300, 4030, 6600< li>
  • Compatible with John Deere Combine(s) 45, 55, 95, 105< li>
  • Compatible with John Deere Harvester(s) 699< li>
  • Replaces John Deere OEM number AR12013< li>
  • Replaces Wico manufacturer number X5614< li> < UL> (Part No: 111100)
$14.26
Connector Housing -
  • For John Deere tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number T28583< li> < UL> (Part No: 170517)
$0.40
Distributor - Built exactly like the original, this new distributor replaces Delco 1111558. Complete and ready to install. If replacing a Magneto you need 2 A4157R distributor hold down clamps. (Part No: 178488)$370.00
Distributor Cam Lobe -
  • For John Deere tractor models 1010, 2010 (s n: 42001-later), 3010, 3020 (s n: 122999-earlier)< li>
  • Replaces John Deere OEM number R11300, R11262< li>
  • For Delco Remy Distributor number 1112623< li>
  • Fits John Deere Construction & industrial models 115 Series Power Unit, 145 Series Power Unit< li>
  • Aluminum body Delco with a screw cap< li> < UL> (Part No: 127041)
$59.00
Distributor Cap - This Distributor cap for a 2 Cylinder with a Delco Distributor, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o-clock and 3:00 o-clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Part No: 111725)$10.30
Distributor Cap - 4 Cylinder Distributor SCREW TYPE CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 1960833 (Part No: 105569)$9.06
Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models 1010, 2010. Also Replaces 811735. (Part No: 104554)$8.16
Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 3300, 400, 401, 401B, 401C, 410, 450, 480, 480A, 480B, 24A, 440, 440A, 440B, 1010, 2010, 2020, 2030, 2510, 2520 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564. (Part No: 105566)		$12.26
Distributor Cap - This new Distributor cap is for 3 cylinder models with Prestolite Distributor #'s - IBT-4301B, IBT-4301C & IBT-4301D. Replaces AT21717 and 21A447. (Part No: 108147)		$26.76
Distributor Cap -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Wico Distributor: DB< li> < UL> (Part No: 121510)
$43.76
Distributor Cap - For 4010, 4020 with Delco-Remy Distributor #1112466 or 1112624. (Part No: 105585)		$9.19
Distributor Cap - For 4010 with Delco-Remy Distributor #1112581. Also used on Combines 105, 95, 55 with 1111706 or 1112581 Delco Distributors. Replaces 824735, 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320. (Part No: 104557)		$9.20
Distributor Cap - 6 Cylinder Prestolite -
  • For John Deere tractor models 4000, 4010, 4020, 4230< li>
  • Replaces John Deere OEM number AT14690< li>
  • Prestolite distributor number(s): IBT6101< li> < UL> (Part No: 109897)
$66.00
Distributor Cap Clip -
  • For John Deere tractor models 1010, 1020, 1520, 2010 (s n 42001-later), 2020, 2030, 2510, 2520, 4030< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere OEM number AT14679< li> < UL> (Part No: 112081)
$20.26
Distributor Cap, Horizontal - For Delco distributor on: A, B, G, 50, 60, 70. (Part No: 105568)$29.99
Distributor Cap, Vertical, 6 Volt - Distributor cap for Delco distributor, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click "enlarge image"), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 103152)$10.40
Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Part No: 125927)$19.26
Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Part No: 103153)$9.00
Distributor Dust Cover -
  • For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere OEM number AT14682< li>
  • Prestolite distributor number(s): IBT4101, IBT4301, IBT6101< li> < UL> (Part No: 109896)
$46.00
Distributor Gear -
  • For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Replaces John Deere OEM number AT21722< li> < UL> (Part No: 121767)
$76.00
Distributor Hold Down Clamp - This Distributor Hold Down Clamp is serviceable, but not like the original on John Deere M, MC, MI, MT, 1010, 2010, 320, 330, 40, 420, 430, 440. Will replace John Deere part number M415T. (Part No: 182464)		$9.46
Distributor Point Set - This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A(659290-662873. (Part No: 172995)		$19.50
Distributor, Rebuilt - This Rebuilt Distributor comes complete with Cap, Points, Condenser and Shaft Gear. For tractor models 520, 530, 620, 630, 720, 730. Replaces 1112576. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 203515)$243.01
Distributor, Rebuilt - Complete remanufactured distributor for John Deere M, 40, 320 and 330 tractors with Delco distributor 1111709, John Deere part numbers AM372T, AM792T. A refundable $75.00 core charge will be added to your order. (Part No: 204049)$322.40
Distributor, Rebuilt - Complete remanufactured distributor for John Deere 420, 430 and 440 tractors with Delco distributor 1112571, John Deere part number AM3090T. A refundable $25.00 core charge will be added to your order. (Part No: 204320)$243.01
Distributor, Rebuilt - Complete remanufactured distributor for John Deere 4000, 4010, 4020, 4230 tractors with Delco distributor 1112581, John Deere part number AT416T. A refundable $75.00 core charge will be added to your order. (Part No: 205093)$326.01
Distributor, Rebuilt - Complete remanufactured distributor for John Deere 2020, 2030, 2510, 2520 with Prestolite distributor IBT4101U IBT-4101U. John Deere part number AT21351. This is a gear driven distributor. A refundable $125.00 core charge will be added to your order. (Part No: 205329)		$360.00
Distributor, Remanufactured, Delco Remy, 1111418, AA6041R -
  • For John Deere tractor models 50, 60, 70< li>
  • Replaces John Deere OEM number AA6041R< li>
  • Replaces Delco Remy manufacturer number 1111418< li>
  • New distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit< li> < UL> (Part No: 205101)
$210.01
Distributor, Remanufactured, Delco Remy, 1112569, AR21540 -
  • For John Deere tractor models 520, 530< li>
  • Replaces John Deere OEM number AR21540, AB5244R< li>
  • Replaces Delco Remy manufacturer number 1112569< li>
  • Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit< li>
  • For Dust Cover use Item #: 103151< li> < UL> (Part No: 203570)
$245.01
Distributor, Remanufactured, Prestolite, IBT-6101 -
  • For John Deere tractor models 4000, 4010, 4020< li>
  • Replaces Prestolite manufacturer number IBT-6101< li>
  • For Tune-Up Kit use Item #: 109897< li> < UL> (Part No: 203994)
$329.01
Distributor Rotor - Used on Delco Distributors with screw held caps, 1964 and later. It replaces Delco number 1954566. Replaces OEM numbers R11260, 10P3024, 1024916M1, 1954566, 74056700, AV101412, GW1954566, 21A310, 111190, 1400-5049. (Part No: 111190)$3.00
Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits M, MC, MI, MT, 320, 330, 40, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010 with one of the following Delco distributors: 1112623, 1112623, 1112577, 1112648, 1112581, 1111418. Replaces: washer: 811912, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Part No: 178103)		$31.26
Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Round Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.345 inch diameter round hole. If not sure, measure before ordering. Used on M, MC, MI, MT, 320, 330, 40; Replaces: 810794, 817363, 1847646, 1847647, 1878405 (Part No: 111459)$18.76
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Used on some of the following using Delco distibutors: A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 1010, 2010, 3010, 4010, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730. Replaces: 12H290R, 817363, 1909206, 1914142, 1916805, 1916806 (Part No: 111468)$14.99
Distributor - Wico B-4 - For tractor models 70, 720, 730, 80, 820, 830 FOR PONY STARTING MOTOR ENGINE. Wico Model B-4 Distributor, complete, new. (Part No: 121924)		$405.00
Distributor - With Base, Remanufactured, Delco Remy, 1111418 -
  • For John Deere tractor models 50, 60, 70< li>
  • Replaces Delco Remy manufacturer number 1111418< li>
  • Includes L drive base, new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit< li>
  • This is a changeover from magneto to distributor< li>
  • For Distributor Cap use Item #: 103151< li> < UL> (Part No: 204597)
$420.01
Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models 2010 with 145 eng., 1010, 2010, 2020, 2030 with 115, 145, 180, 219 eng., 2030, 2510, 2520 with 180, 202, 203 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt negative ground system with a Prestolite distributor. MUST ALSO REPLACE CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. Used with the following distributors: IBT-4702, IBT-4709, IBT-4707, IBT-4706, IBT-4705, IBT-4701, IBT-4501, IBT-4405, IBT-4404, IBT-4403A, IBT-4105A, IBT-4106A, IBT-4402, IBT-4001G, IBT-4102A (Part No: 105090)		$104.00
Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models: 1010, 2010 with 115, 165 eng., 3010 with 201 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Us on a 12 volt negative ground system, use with Delco distributor. (Part No: 105071)		$109.00
Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 12 volt NEGATIVE ground system. (Part No: 105073)		$97.00
Electronic Ignition Conversion Kit, 12 volt negative ground - 12 VOLT NEGATIVE Ground. For Tractor Model 4010 with 302 eng.For the following Delco Distributors: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on 12 VOLT NEGATIVE ground system. (Part No: 105076)		$122.00
Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models 4010, 4020 with 302, 340 eng., 4020 with 362 eng using Delco distributor # 1112624 & 1112466 Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 105074)		$98.00
Electronic Ignition Conversion Kit, 12 volt negative ground - For tractor models 1010, 2010, 2030, 2510, 2520 with Distributor number IBT-4101, IBT-4101B, IBT-4101H, IBT-4101L, IBT-4101N, IBT-4101R, IBT-4101S, IBT-4101U. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt Negative ground system. (Part No: 108439)$145.00
Electronic Ignition Conversion Kit, 12 volt negative ground - Use on the following tractors: 1020 and 1520 with 3-cylinder engine sizes 135, 152, 164 using Prestolite distributor # IBT4301B, IBT4301C, IBT4301D. Also used on industrial 300, 300B, 301, 301A, 302, 302A, 310, 350, 350B, 380. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt NEGATIVE ground systems. (Part No: 105087)		$151.37
Electronic Ignition Conversion Kit, 12 volt negative ground - Use on the following tractors: 1010, 2010 or 3010, with 4-cylinder engine size 115, 165, or 201 engine using Delco distributor # 1112577. VERIFY CORRECT DISTRIBUTOR NUMBER. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt NEGATIVE ground systems. (Part No: 113775)		$119.00
Electronic Ignition Conversion Kit, 12 Volt Negative Ground - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system. (Part No: 105065)		$110.99
Electronic Ignition Conversion Kit, 12 Volt Negative Ground - For Tractor Models: M gas, with Delco 1111709; 40, 320 and 330 gas with Delco 1111709, 1112571; 50, 60 and 70 LPG with Delco 1111418; 420, 430 and 440 gas with Delco 1112571. For 12 Volt, NEGATIVE ground system. (Part No: 105068)		$120.00
Electronic Ignition Conversion Kit, 12 Volt Negative Ground - For tractor models 50, 60 and 70 Gas with Delco 1112569; 520 and 530 Gas with Delco 1112569; 60, 70, 620, 630, 720, 730 Gas with Delco 1112576. Electronic Ignition Conversion Kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 105066)		$115.99
Electronic Ignition Conversion Kit, 12 volt positive ground - Use on the following tractors: 1010, 2010 or 3010, with 4-cylinder engine size 115, 165, or 201 engine using Delco distributor # 1112577. VERIFY CORRECT DISTRIBUTOR NUMBER. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt POSITIVE ground systems. (Part No: 1143P12)$139.99
Electronic Ignition Conversion Kit, 12 volt positive ground - Use on the following tractors: 4010 and 4020 with 6-cylinder engine sizes 302, 340, 362 using Delco distributor # 1112624 & 1112466. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt POSITIVE ground systems. (Part No: 105075)		$104.99
Electronic Ignition Conversion Kit, 12 volt positive ground - For Tractor Models 2010 with 145 eng., 1010, 2010, 2020, 2030 with 115, 145, 180, 219 eng., 2030, 2510, 2520 with 180, 202, 203 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt positive ground system, use with Prestolite distributor using the "A" type rotor which is "T" Shaped. CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. (Part No: 108152)$118.51
Electronic Ignition Conversion Kit, 12 volt positive ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 12 volt POSITIVE ground system. (Part No: 108150)		$104.99
Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Electronic Ignition Conversion Kit - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system. (Part No: 108156)		$131.00
Electronic Ignition Conversion Kit, 12 Volt Positive Ground - This electronic ignition conversion kit fits the following tractor models: 1010 and 2010 both with distributor numbers: IBT-4101. This kit uses an electronic module to replace points and condenser. It is designed for use on a 12 volt positive ground system. (Part No: 108440)$157.00
Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Use on the following tractors: 50, 60, 70, 520, 530, 620, 630, 720, and 730 with 2-cylinder gas engine using Delco distributor # 1112569 or 1112576. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt POSITIVE ground systems. (Part No: 105067)		$133.49
Electronic Ignition Conversion Kit, 6 volt negative ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 6 volt NEGATIVE ground system. (Part No: 1145AN6)		$101.11
Electronic Ignition Conversion Kit, 6 volt positive ground - 6 VOLT POSITIVE Ground. Use on the following tractors: 4010 with 6-cylinder engine size 302 engine For Tractor Model 4010 with 302 engine with the following Delco Distributors: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632.. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 6 volt POSITIVE ground systems. (Part No: 105077)		$130.00
Electronic Ignition Conversion Kit, 6 Volt Positive Ground - Electronic Ignition Conversion Kit - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 6 volt POSITIVE ground system. (Part No: 122090)		$133.46
Electronic Ignition Conversion Kit, 6 Volt Positive Ground - Use on the following tractors: 50, 60, 70, 520, 530, 620, 630, 720, and 730 with 2-cylinder gas engine using Delco distributor # 1112569 or 1112576. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 6 volt POSITIVE ground systems. (Part No: 185292)		$133.49
Electronic Ignition Conversion Kit, 6 Volt Positive Ground - Use on the following tractors: M, 40, 320, 330, 420, 430, and 440 with 2-cylinder gas engine using Delco distributor # 1111709 or 1112571 or 50, 60, 70, with LPG engine using distributor 1111418. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 6 volt POSITIVE ground systems. (Part No: 105069)		$133.49
Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n CPN12259EI. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. (Part No: 183757)		$133.99
Electronic Ignition Conversion Kit, Wico DB distributor # X30091E - 12 Volt Negative Ground. For 1010, 2010, all with Wico DB distributor # X30091E. Pertronix Electronic Ignition Conversion Kit. (Part No: 108153)		$135.99
Engine Oil Pressure Sender -
  • For John Deere tractor models 4055, 4255, 4455, 4560, 4755, 4760, 4955, 4960, 7210, 7410, 7510, 7610, 7710, 7810, 8560, 8570, 8760, 8770, 8870< li>
  • Replaces John Deere OEM number RE63291, RE37549, RE57478< li> < UL> (Part No: 182940)
$39.00
External Voltage Regulator - External Voltage Regulator. For Bosch System. For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2840, 3030, 3120, 3130, 820, 830 LOADER, 830 WINDROWER, 920, 930 All with Bosch system. Replaces 01160376, 01163008, 190601009. (Part No: 113314)		$11.40
Generator Bracket - For H after SN# 27000. Generator Bracket. (3804R) (Part No: 179842)		$96.00
Generator Cutout Assembly - For A and B to 1947. Replaces 1116809DR. (Part No: 173060)$27.90
Generator - Delco Style (10159), Remanufactured, Delco Remy, 1100506 -
  • For John Deere tractor models A, AO, AR, B, G, GH, GN, GW, H, HNH, HWH< li>
  • Replaces Delco Remy manufacturer number 1100506, 1101371, 1101377, 1101390< li>
  • Replaces manufacturer number 10159, 340-140, 92-01-3039< li>
  • Delco Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Amperage: 17< li>
  • Regulator: External < li> < UL> (Part No: 203524)
$420.01
Generator - Delco Style (10166), Remanufactured, Delco Remy, 1100955, TY1442 -
  • For John Deere tractor models A, G, GH, GN, GW, 50, 60< li>
  • Replaces John Deere OEM number TY1442, AA4921R, AF699R, AA4001R< li>
  • Replaces Delco Remy manufacturer number 1100955, 1101755, 1101777< li>
  • Replaces manufacturer number 10166, 340-30, 340-30A, 92-01-3037< li>
  • Delco Style < li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 10< li>
  • Regulator: External < li> < UL> (Part No: 203526)
$405.01
Generator - Delco Style (10222), Remanufactured, Delco Remy, 1101859 -
  • For John Deere tractor models 40, 320, 330, 420, 430< li>
  • Compatible with John Deere Construction & industrial models 440< li>
  • Replaces Delco Remy manufacturer number 1101859< li>
  • Replaces manufacturer number 10222, 340-31, 92-01-3060< li>
  • Delco Style< li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Amperage: 20< li>
  • For Flat Mount Regulator use Item #: 105516< li> < UL> (Part No: 203530)
$460.01
Generator - Delco Style (10235), Remanufactured, Delco Remy, 1100027, AF2080R -
  • For John Deere tractor models 70, 80, 720, 820< li>
  • Compatible with John Deere Combine(s) 45< li>
  • Compatible with John Deere Hay Cutting(s) 215, 830< li>
  • Replaces John Deere OEM number AF2080R< li>
  • Replaces Delco Remy manufacturer number 1100027, 1100038< li>
  • Replaces manufacturer number 10235, 340-191, 92-01-3042< li>
  • Delco Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Amperage: 35< li>
  • Regulator: External < li> < UL> (Part No: 203531)
$435.01
Generator - Delco Style (9276), Remanufactured, Delco Remy, 1101852 -
  • For John Deere tractor models M, MC, MT< li>
  • Replaces Delco Remy manufacturer number 1101852, 1101857, 1101860< li>
  • Replaces manufacturer number 9276, 340-32, 92-01-3066< li>
  • Delco Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Amperage: 12< li> < UL> (Part No: 203517)
$420.01
Generator - Delco Style (9974), Remanufactured, Delco Remy, 1103021, AR11007 -
  • For John Deere tractor models 80, 720, 730, 820, 830< li>
  • Replaces John Deere OEM number AR11007< li>
  • Replaces Delco Remy manufacturer number 1103021< li>
  • Replaces manufacturer number 9974, 340-87, 92-01-3043< li>
  • Delco Style < li>
  • Voltage: 24< li>
  • Rotation: Clockwise< li>
  • Amperage: 10< li>
  • Regulator: External < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 203523)
$370.01
Generator - Delco Style, Remanufactured - This is a Delco Style 9919, 12 volt, 20 amp remanufactured generator. It replaces Delco 1100399, 1100418, 1100422, 1100449. Replaces John Deere AT12649, TY1440. Add $25.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 203521)		$342.01
Generator Pulley - Used on John Deere models: A, B, G, 50, 60, 70, AO, AI, AR, BO, BR, D, H. This pulley fits Delco generator numbers: 1100955, 1101356, 1101371, 1101777, 1100506, 1100508, 1101390, 1101755, 1100955, 1101385, 1101401, 1101720, 1101756, 1101784, 1101377. The pulley measures 4.500 inches outside diameter, 0.507 inch belt groove width, 0.670 inch inside diameter, with a 0.127 inch keyway. This part replaces OEM B1030R (Part No: 179405)		$51.70
Generator to Alternator Conversion Bracket -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • For converting from generator to alternator< li>
  • Bored for early models with 3 8"bolts< li>
  • Will work for late models with 7 16" bolts but will need to be drilled out to fit < li> < UL> (Part No: 113516)
$45.00
Glow Plug - For tractor models 670, 770, 2210, 4010, 4100, 4110 (Part No: 124303)$9.20
Glow Plug - This glow plug fits the following tractor models: 1010 (serial number 31001 and up, using T18532T or T19139T injector chamber) and 2010 (serial number 29001 and up, using T18532T or T19139T injector chamber). It measures: 3 8- 24 UNF. Please note that it is important to check thread size before ordering. Also, four glow plugs are used per tractor, these are sold individually. Replaces: AT16499T, AT23537, 0250200018, 6A843G19, 6A843G019, 6A467G19, 6A467G012, and 6A467G12. (Part No: 117669)		$32.26
Glow Plug -
  • For John Deere tractor models 1010 (s n 031000-earlier), 2010 (s n 029000-earlier)< li>
  • Replaces John Deere OEM number AT16144, AT11044, AT13152< li> < UL> (Part No: 117667)
$59.00
Glow Plug -
  • For John Deere tractor models 240, 1350, 1550, 1750, 1850, 1950, 2155, 2250, 2350, 2355, 2450, 2550, 2650, 2750, 2755, 2850, 2955, 3050, 3055, 3100, 3110, 3150, 3155, 3200, 3210, 3255, 3300, 3310, 3350, 3400, 3410, 3650, 5315, 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900< li>
  • Replaces John Deere OEM number RE502079< li>
  • Replaces Bosch manufacturer number 0-250-102-002, 0-102-024-405< li>
  • Overall Length: 95mm< li>
  • Thread: 7 8 “ (22.2mm) – 24 UNF < li>
  • Element: Spring< li> < UL> (Part No: 129231)
$17.76
Governor Bearing and Race -
  • For John Deere tractor models H, R, 80, 820, 830, 840 (2 cylinders only)< li>
  • Replaces John Deere OEM number JD7150, JD7151R, JD7152R, JD7153R< li> < UL> (Part No: 115159)
$60.00
Governor Spring -
  • For John Deere tractor models B (s n 201000-later), R (w Pony Motor), 50, 520, 530< li>
  • Replaces John Deere OEM number B2636R< li> < UL> (Part No: 125553)
$47.00
Headlight Wiring Harness Kit -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • For 4 Light, Flat Top Fenders< li>
  • Headlight harness only< li> < UL> (Part No: 113778)
$129.99
Hi - Low Switch Kit -
  • For John Deere Construction & industrial models 244, 344, 444, 543, 643, 644, 843< li>
  • Gives true low and high side protection cuts out low side at 5 pounds. Cuts out high side at 380 pounds.< li> < UL> (Part No: 163431)
$49.50
Hydraulic Switch -
  • For John Deere tractor models 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8320R, 8330, 8335R, 8345R, 8360R, 8400, 8410, 8420, 8430, 8520, 8530, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9420, 9420T, 9430, 9430T, 9520, 9520T, 9530, 9530T, 9620, 9620T, 9630, 9630T< li>
  • Compatible with John Deere Harvester(s) 3510, 3520< li>
  • Compatible with John Deere Construction & industrial models 653G< li>
  • Replaces John Deere OEM number RE55516< li> < UL> (Part No: 164040)
$58.00
Ignition Key - Only -
  • For John Deere tractor models A, AO, AR, B, G, 80, 420, 820 (2-Cylinder), 830 (2-Cylinder), 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020
  • Replaces John Deere OEM number A4700R< li> < li>
  • Compatible with Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88< li>
  • Compatible with Massey Ferguson Construction & industrial models 200< li>
  • Replaces Massey Ferguson OEM number 180292M1, 192427M1< li> < UL> (Part No: 121147)
$3.50
Ignition Key Switch -
  • For John Deere tractor models 5220, 5320, 5420, 5520, 5603, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6330, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6430, 6500, 6500L, 6510S, 6520L, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE56411< li> < UL> (Part No: 186758)
$27.00
Ignition Kit, Delco Clip-Held Distributor Cap - Contains points, condenser, and rotor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. For: A, AN, AH, AR, AO, B, BN, BW, D, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111558. (Part No: 103151)		$10.16
Ignition Kit, Delco Screw-Held Distributor Cap - Ignition KIT for Delco distributor with screw held cap with ROTOR For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: 105278)		$10.40
Ignition/Light Switch - 5 terminal, uses A4653R lever. For tractor models 320, (M, MC, MI, MT all with regulator), 40, (50 up to SN# 5021479), (60 gas up to SN# 6025999, STD gas up to SN# 604299, & Orchard), (70 gas), 330, 420, 430, 435, 440, (620 Orchard from SN# 6223000 and up). Replaces AA5071R. (Part No: 108163)		$36.76
Ignition/Light Switch, 5 Position - With Lever. For Tractors with Cutout For tractor models M, MC, MI, MT. Replaces AM812T, AM357T (Part No: 126168)		$84.50
Ignition/Light Switch, 6 Terminal - Uses A4653R lever. For tractor models (50 from SN# 5021480), (60 Row Crop from SN# 26000 and Std from SN# 43000), (70 LP), 520, 620, (720 gas). (Part No: 116853)$51.99
Ignition Point Set, Presto-Lite Distributor - Pre-assembled point set For tractor models using Presto-Lite Distributor. Replaces Prestolite IBP2040L. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Part No: 111191)		$5.16
Ignition Switch - This is a 12 volt, 20 amp, 4 position ignition switch used on multiple John Deere models. It has a 1.024" thread diameter. Replaces original part number AL35864. (Part No: 1700186)		$34.56
Ignition Switch -
  • For John Deere tractor models A (Ignition s n 477000-502231), B (Ignition 325000-later), D (Ignition s n 143800-188057), 2155, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2855, 2855N, 2950, 2955, 3020 (Ignition s n 68000-122999), 3055, 3150, 3155, 3255, 4020 (Ignition s n 91000-200999), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010 (s n 8000-later), 5020 (Ignition s n 24999-ealier), 6030, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6415, 6420, 6420L, 6500, 6500L, 6505, 6510, 6510L, 6520, 6520L, 6605, 6615, 6715, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610 (s n 89999-earlier), 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) CTS, 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9510, 9550, 9550 SH, 9560, 9560 SH, 9560 STS, 9570, 9570 STS, 9600, 9610, 9650, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9670, 9770 STS, 9860 STS, 9870 STS< li>
  • Compatible with John Deere Harvester(s) 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986< li>
  • Compatible with John Deere Construction & industrial models 210C, 300D, 310, 310A, 310B, 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315D, 315SE, 350D, 410 (also the ignition switch), 410B, 410C, 410D, 410E, 410G, 450C, 482C, 500 (s n 68000-later), 500A (s n 123113-earlier), 500C, 510, 510B, 510C, 510D, 600 (s n 91000-200999-later), 610B, 610C, 710B, 710C, 710D, 760, 760A< li>
  • Replaces John Deere OEM number R39554, AR46184, AR47373, AB1837R< li> < UL> (Part No: 121159)
$12.76
Ignition Switch -
  • For John Deere tractor models 1010 (s n 051039-earlier), 1010 (s n 051039-earlier, Gas), 2010 (s n 055380-earlier), 2010 (s n 055380-earlier, Gas LP), 3010, 3010 (Gas LP), 3020 (s n 067999-earlier), 3020 (s n 067999-earlier, Gas LP), 4010, 4010 (Gas LP), 4020 (s n 090999-earlier), 4020 (s n 090999-earlier, Gas Lp)< li>
  • Compatible with John Deere Construction & industrial models 500 (s n 67999-earlier, Gas), 500 (s n 67999-earlier), 600 (s n 90999-earlier, Gas), 600 (s n 90999-earlier)< li>
  • Replaces John Deere OEM number AR30278, AR26528< li>
  • 12 Volt< li>
  • 20 Amp< li>
  • Gas Engines< li> < UL> (Part No: 163684)
$30.00
Ignition Switch -
  • For John Deere tractor models 1020 (s n 117499-earlier), 1520 (s n 117499-earlier), 2020 (s n 117499-earlier), 2030 (s n 117499-earlier)< li>
  • Compatible with John Deere Construction & industrial models 300 (s n 117905-earlier), 350, 380 (s n 184192-earlieer), 400 (s n 117905-earlier), 440 (s n 119500-earlier), 440A (s n 119500-earlier), 440B (s n 119500-earlier), 450, 480, 480A (s n 184192-earlieer), 480B (s n 184192-earlieer), 540, 540A, 570 (s n 001699-earlier), 570A (s n 001699-earlier)< li>
  • Replaces John Deere OEM number AT21880< li> < UL> (Part No: 171567)
$5.76
Ignition Switch -
  • For John Deere tractor models 4200, 4300, 4400, 4500, 4600, 4700, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5105, 5200, 5205, 5210, 5220 (s n 220177-earlier), 5300, 5310, 5310N, 5320N (s n 238109-later), 5400, 5400N, 5410, 5420, 5420N (s n 248002-later), 5500, 5500N, 5510, 5510N, 5520N (s n 258223-later), 5600, 5605, 5700, 5705, 6300, 6500, 6600, 7500, 7505< li>
  • Compatible with John Deere Combine(s) 1165 (s n 37491-later), 1170 (s n 38095-later)< li>
  • Replaces John Deere OEM number RE264579, RE45963< li> < UL> (Part No: 180986)
$32.75
Ignition Switch, Keyed - This ignition switch comes with 2 keys. It has 6 spade terminals. For models 1050, 650, 750, 850, 900HC, 950, 1250, 1450, 1650. Replaces CH11696, 194322-52110 (Part No: 168329)		$48.00
Ignition Switch with 2 Keys - 6 Terminal. For tractor models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 91000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Part No: 121144)		$16.52
Ignition Switch with Key -
  • For John Deere tractor models 940, 1040, 1140, 1640, 2040, 2040S, 2140, 3040, 3140< li>
  • Replaces John Deere OEM number AL35864, AL32905< li>
  • Includes Key< li>
  • Voltage: 12< li>
  • Amps: 20< li>
  • Number of Positions: 4< li>
  • Terminal Code: 2< li>
  • Thread Diameter: 1.024"< li> < UL> (Part No: 170186)
$26.48
Ignition Tune Up Kit Less Rotor - Ignition kit, less rotor. Contains: Points, gauge, condenser. Pre-assembled points using Prestolite distributors. For: 1010, 1020, 2010, 2020, 2510, 323W. Baler; 40, 45, 55, 65, 95, 105. Combines; 99, 299. Cotton Pickers; 12. Forage harvester; 600, 700. Hi-Cycles, TA145, 217 Power Units; 215, 215A windrowers. (Part No: 105563)		$12.00
Key Switch, 2 Terminal - With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Part No: 111037)		$32.99
Key Switch, 6 Terminal - With key. For tractor models (1010 gas or LP up to SN# 51039), (2010 gas LP up to SN# 055380), (3010 gas LP), (3020 gas LP up to SN# 067999), (4010 gas LP), (4020 gas LP up to SN# 090999). (Part No: 121145)		$45.00
Key Switch, 6 Terminal - With keys. For tractor models (3010 diesel), (3020 diesel up to SN# 67999), (4010 diesel), (4020 diesel up to SN# 909990, (5010 up to SN# 7999), 8020. (Part No: 121146)		$63.00
Light Arm - For tractor models 40, 420, 430. Replaces T11341T. (Part No: 180677)$23.00
Light Bracket, Rear - For model M SN# 1000 to 45343. (Part No: M1499T)$81.08
Light Bracket, Rear - For model M from SN# 45344. (Part No: 179471)$96.00
Light Clamp - This Light Clamp fits: (A Styled models up to serial number 583999 with cast iron dash), (B Styled models up to serial number 200999 with cast iron dash), (G serial number 13000 & up for rear light only), H, (60, 620, 630 Standard & Orchard), (8020 Used as an oil level pipe clamp). Replaces: A2613R (Part No: 126559)		$10.30
Light Switch, 12 Volt - 4 position, 5 terminals and fuse, .50" thread dia. For tractor models 1010, 1020, 1520, 2010, 2020, (2030 SN# up to 187300), 3010, (3020 SN# up to 067999), 4010, (4020 SN# up to 090999), 300, 301, (310 SN# up to 255718), 400, 401, (410 SN# up to 255718), (500 SN# up to 067999), (600 SN# 65000 to 90999), 760. (Part No: 125703)		$23.00
Light Switch, 6 Volt -
  • For John Deere tractor models A (s n 477000-583999), B (s n 325000-later), D (s n 143800-186751), G (s n G13000-525999)< li>
  • Replaces John Deere OEM number AF708R, AB2687R, AF687R< li>
  • 6 Volt< li> < UL> (Part No: 173454)
$46.20
Light Switch Knob -
  • For John Deere tractor models A, B, D, G, H, L, LA, R< li>
  • Replaces John Deere OEM number F690R< li> < UL> (Part No: 126562)
$16.26
Magneto Cap - For Wico model C Magneto, tractor models A, AO, AR, B, BO, BR, D, G, H, R. Has "WICO" heat stamped on outer face like original. (Part No: 107080)		$65.00
Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Part No: 105667)$49.95
Magneto Cap with Gasket - For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. Replaces: gasket: X5618, X5644, cap: X5643 (Part No: 105667)		$49.95
Magneto Coil - For WICO model C magneto. For tractors A, AO, AR, B, BO, BR, D, G, H. Replaces: AR12011R and X2766. (Part No: 105659)		$89.99
Magneto Coil - For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Part No: 111196)		$87.00
Magneto Condenser - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: 179181)		$24.40
Magneto Ignition Kit - Ignition kit, less rotor. Contains:Points, gauge, condenser. 2-piece points using Wico XB Distributor. For A(659290- 662873)~ AR, AO(275397-532), B(268804 and up), 50(5000001 - 5016449). For 50, A, AO, AR, B (Part No: 179217)		$32.73
Magneto Point Set - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: 112107)		$20.30
Magneto Point Set - For XH894, XH477B, XH1042, XH3001, XH909 Magnetos. (Part No: 130478)		$23.00
Magneto, Remanufactured, AA3870R -
  • For John Deere tractor models A (s n 488000-later), B (s n 90001-later), G (s n 11981-later), H (s n 12001-later)< li>
  • Replaces John Deere OEM number AA3870R, AH653R< li>
  • Short lug - 3 8"< li>
  • For Tune-Up Kit use Item #: 105594< li> < UL> (Part No: 203721)
$650.01
Magneto, Remanufactured, AB2875R -
  • For John Deere tractor models A (s n 487999-earlier), B (s n 90000-earlier), G (s n 11980-earlier), H (s n 12000-earlier)< li>
  • Replaces John Deere OEM number AB2875R, AB3674R< li>
  • Long lug - 1 2"-3 4"< li>
  • For Wico X, XH, XV Tune-Up Kit use Item #: 107080< li> < UL> (Part No: 203605)
$740.01
Magneto, Remanufactured, AD2426R -
  • For John Deere tractor model D< li>
  • Replaces John Deere OEM number AD2426R< li>
  • Base Mount< li>
  • For Tune-Up Kit use Item #: 107080< li> < UL> (Part No: 204246)
$550.01
Magneto Rotor - For WICO X Magnetos. Fits A, AO, AR, D, G, GH, R, All with WICO magneto (SN# XC100>) (Part No: 168696)		$24.76
Magneto Tune Up Kit - Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Part No: 105594)		$61.00
Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: 182504)		$14.99
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5 8-32 thread. It is used on John Deere Models: 2010, 3010, 4010. For John Deere models, this switch is used when updated to threaded stem style mount. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Part No: 164031)		$29.26
Neutral Start Switch Shim -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 7020, 8430 (Model Year 1974-1981), 8440, 8450, 8460, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9420, 9420T, 9430< li>
  • Replaces John Deere OEM number T16911< li> < UL> (Part No: 176721)
$0.80
Oil Pressure Sensor -
  • For John Deere tractor models 7720, 7820, 7920, 8130, 8225R, 8230, 8245R, 8270R, 8295R, 8295RT, 8320R, 8320RT, 8330, 8345R, 8345RT, 8430, 8530, 9120, 9220, 9230, 9320, 9320T, 9330, 9420, 9420T, 9430, 9520, 9520T, 9530, 9620, 9620T, 9630< li>
  • Replaces John Deere OEM number RE179984< li> < UL> (Part No: 169829)
$35.00
Oil Pressure Sensor Switch -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7720, 7800, 7810 (s n 089999-earlier), 7810 (s n 090000-later), 7820, 7920< li>
  • Replaces John Deere OEM number RE212878, RE190351, RE165048< li> < UL> (Part No: 167642)
$45.00
Oil Pressure Switch -
  • For John Deere tractor models 6110, 6200, 6210, 6300, 6310, 6310S, 6400, 6410, 6410S, 6500, 6510S, 7210, 7410, 7510, 7610 (s n 089999-earlier), 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7810 (s n 089999-earlier), 7810 (s n 090000-later)< li>
  • Replaces John Deere OEM number RE212880, RE190352, RE69675, RE165069< li> < UL> (Part No: 167643)
$45.00
Oil Presure Switch -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7800, 7810 (s n 089999-earlier), 7810 (s n 090000-later)< li>
  • Replaces John Deere OEM number RE212870, RE190348, RE165319, RE69671< li> < UL> (Part No: 167640)
$45.00
Oil Temperature Warning Lamp Switch -
  • For John Deere tractor models 6105M, 6110, 6110L, 6115M, 6120, 6120L, 6125M, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6230, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6330, 6400, 6400L, 6405, 6410, 6410L, 6415, 6420, 6420L, 6430, 6500, 6500L, 6510, 6510L, 6520L, 6615, 6715, 7130, 7220, 7230, 7320, 7330, 7420, 7520< li>
  • Replaces John Deere OEM number AL178071< li> < UL> (Part No: 167644)
$51.00
Point Set - Pony Motor Distributor -
  • For John Deere tractor models 70, 80, 720, 730, 820, 830< li>
  • For John Deere Magneto number X9021< li>
  • Two required per engine< li>
  • Sold individually< li>
  • Gap points at 0.020"< li> < UL> (Part No: 124002)
$29.23
Pressure Switch Wiring Harness -
  • For John Deere tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number RE203464< li> < UL> (Part No: 125653)
$33.40
Pulley - This is a two groove pulley used on multiple John Deere models. For 13mm (0.50 Inch) Belts. 81Mm (3.20 Inch) Outside Diameter, 17mm (0.669 Inch) Inside Diameter. Used on Alternators: A-890, 13143, 021000-7420, 100211-0080, 100211-0081, 100211-0290, 100211-0291, 100211-0292, 100211-0790, 290-402. It replaces John Deere Part Numbers R81507, R52161. Replaces Delco part numbers 7940-1107, 1149-P, 8126450, 115-030, 191002, 1B-5011, 379401107, 22025011 (Part No: 117432)		$12.76
Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. Replaces R52159 (Part No: 172973)		$14.76
Pulley - This Pulley is used on For 12 and 24 Volt Generators on John Deere 3010, 3020, 4010, 4020, 4230, 5010, 5020 Tractors. Used with AR11302, AR34567, TY25993 and TY1447 Generators. It measures: 1.250 inches wide, 3.230 inches in diameter, 0.670 inch shaft diameter, 0.156 inch keyway. It is for 13mm (1 2 inch) wide belts. Replaces 86387, 1949916, R11189, 81-1700, GDR5001 (Part No: 119729)		$11.40
Push Button Starter Switch - 3 Terminal Push Button Starter Switch with Rubber Cap. Fits 80, 720, 730, 820 2 cylinder, 830 2 cylinder (with Pony start)530, 630, 730 (Gas, LP, All fuel. This starter switch has 5 8 - 32" thread O.D., 3 screw terminals. Switch is rate up to 36 volts. Replaces: AR21219, AR21823, AR20431, AR1324R (Part No: 121158)		$10.00
Rear Wiring Cover - For 520, 530, 620, 630, 720, 730 (cut to length). Rear Wiring Cover from the wiring harness to axle housing. (Part No: 115559)		$15.95
Regulator - 24 Volts -
  • For John Deere Construction & industrial models 130G, 160GLC, 180GLC, 210GLC, 250GLC, 260E, 290GLC, 300GLC, 310E, 330LC, 350GLC, 370E, 380GLC, 400, 410E, 450K, 460E, 470GLC, 524K, 524KII, 544K, 544KII, 550K, 605K, 620G, 620GP, 622G, 622GP, 624K, 624KII, 624L, 640L, 640LII, 643L, 643LII, 648L, 648LII, 650K, 655K, 670G, 670GP, 672G, 672GP, 700 (K), 744K, 748L, 748LII, 750 (K), 755K, 770G, 770GP, 772G, 772GP, 803M, 803MH, 824 (L), 843L, 844 (L), 848L, 848LII, 850 (L), 850K, 853M, 853MH, 859M, 859MH, 870G, 870GP, 872G, 872GP, 903K, 903KH, 903M, 909K, 909KH, 909M, 909MH, 948L, 948LII, 950K, 953K, 953M, 953MH, 959K, 959M, 959MH, 1010 (G), 1050K, 1070 (G), 1070E, 1110 (G), 1110E, 1170 (G), 1170E, 1210E, 1270E, 1270G, 1470E, 1470G, 1510 (G), 1510E, 1910E, 1910G, 2154G, 2156G, 2656G, 3154G, 3156G, 3754G, 3756G< li>
  • Compatible with John Deere Engine(s) 4045, 6068, 6090< li>
  • Replaces John Deere OEM number RE541287< li>
  • Voltage: 24< li> < UL> (Part No: 172712)
$117.10
Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For tractor models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Part No: 164460)		$30.60
Relay - Front Console Wiring Harness -
  • For John Deere Construction & industrial models 310G, 310SG, 315SG, 410G, 710G< li>
  • Replaces John Deere OEM number AT308380< li> < UL> (Part No: 167412)
$26.26
Relay Solenoid Switch -
  • For John Deere tractor models 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4030, 4230, 4430, 4630, 5020 (s n 025000-later), 6030, 7020, 7520< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9410, 9500, 9500 SH, 9510, 9510 SH, 9600, 9610< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9900< li>
  • Compatible with John Deere Construction & industrial models 400, 500B, 600 (s n 201000-later), 644, 644A, 646, 646B, 700A, 740, 743, 760A< li>
  • Compatible with John Deere Hay Cutting(s) 3830< li>
  • Replaces John Deere OEM number AM53945< li>
  • Voltage: 12< li>
  • 3 Terminal< li> < UL> (Part No: 176330)
$23.80
Rockshaft Cover Set -
  • For John Deere tractor models 5010, 5020< li>
  • Replaces John Deere OEM number R36421, R36420, R36422< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156507)
$870.00
Rotor - Used in Wico DB distributor. For tractor models 1010, 2010. Replaces AR12001, AT11264, X30039 (Part No: 108491)		$11.40
Rotor - Rotor. Replaces Prestolite IBT1016.For tractor models using Presto-Lite Distributor.For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Part No: 111188)		$7.76
Rotor - Used with Delco distributors with a clip held cap. For tractor models: A, AO, AR, B, D, G, M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 1010(1112577), 2010(1112577), 3010(1112577), 3020(up to serial number 58899 and 1112577), 4010(up to serial number 39499 and 1112581). Replaces 1905590. (Part No: 110177)$2.76
Rubber Grommet -
  • For John Deere tractor models H, M, MC, MT, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 1350, 1530, 2240, 2440, 2510, 2630, 2640, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 8430, 8630< li>
  • Replaces John Deere OEM number H987R, M305T< li>
  • Can be used for hole in spark plug cover, fuel tank pads and electric wire grommet< li> < UL> (Part No: 126661)
$1.86
Safety Starter Switch - This Neutral Safety Starter Switch is used on the following Yanmar built John Deere Compact Tractors: 2025R, 2027R, 2032R, 2210, 2305, 2320, 2520, 2720, 4010, 4100, 4110, 4115, 655, 755, 855, 955. It is also used on many John Deere Riding Mowers and Gator models. Replaces AM37643 (Part No: 164125)		$10.60
Solenoid - Starter Solenoids. Solenoid assy~ base mount. services starter 1113672 on model 3020D, Serial Number 1T123000 and up~ 4030D, 4230D, Replaces Delco 1115510{D971}, AR77255. 620 (Orchard models with SN: 6223000 & up), 630, 730 (Gas & LP); 12 volt {B}. For 3020, 4030, 4230D. Replaces 1009784M91, 1017877M92, 1028587M91, AR11049, AR11050, AT11593, R11292. (Part No: 105672)		$24.26
Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474, 1107155. Replaces 1119799, DR1465 (Part No: 105670)$15.90
Solenoid Starter - Solenoid for starter AR70436 and other Bosch Starters. For tractors: 830(3-cyl), 1530, 2030, 2040, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 6200, 6300, 6400, 6500. For 1530, 2030, 2040, 2240, 2840, 2940, 830. Replaces AL55046, AL117012, AL25268, SB-172, TX13149, VPF2213, VPF2219, AL25266, AL41524, AV103908, E9NN11390BA, F0NN11390AA. (Part No: 119940)		$23.26
Spark Plug - Extended tip, 14mm thread, 3 4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: 179436)$3.50
Spark Plug - Extended tip, 14mm thread, 3 8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: 179437)$3.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: 182459)		$3.16
Spark Plug Cover - This is for one Left Hand Spark Plug Cover used on tractor models 50 SN# 5018449 and earlier, 60 SN# 6035399 and earlier, 70 SN# 7012349 and earlier. (Part No: 115815)		$39.99
Spark Plug Cover - This is for one Right Hand Spark Plug Cover used on tractor models 50 SN# 5018449 and earlier, 60 SN# 6035399 and earlier, 70 SN# 7012349 and earlier. (Part No: 115816)		$39.99
Spark Plug Cover - Left Hand -
  • For John Deere tractor models 50 (s n 5018450 - later), 60 (s n 6035400 - later), 70 (s n 7012350 - later)< li>
  • Replaces John Deere OEM number A5168R< li>
  • Left Hand < li>
  • With grommet< li>
  • Spark Plug Cover - Right Hand use Item #: 115835< li> < UL> (Part No: 115832)
$39.99
Spark Plug Cover, Left Hand - For model H. (Part No: 115829)		$36.99
Spark Plug Cover, LH - For tractor models 520, 530, 620, 630, 720, 730. Left Hand Side. Includes rubber grommet. ***NOTE: Picture shows both but this is only the left hand side. (Part No: 110303)		$39.99
Spark Plug Cover, RH - For tractor models 520, 530, 620, 630, 720, 730. Right Hand Side. Includes rubber grommet.***NOTE: Picture shows both but this is only the right hand side. (Part No: 110049)		$39.99
Spark Plug Cover - Right Hand -
  • For John Deere tractor models 50 (s n 5018450 - later), 60 (s n 6035400 - later), 70 (s n 7012350 - later)< li>
  • Replaces John Deere OEM number A5167R< li>
  • Right Hand < li>
  • With grommet< li>
  • Spark Plug Cover - Left Hand use Item #: 115832< li> < UL> (Part No: 115835)
$39.99
Spark Plug Cover, Right Hand - For model H (Part No: 115827)		$36.99
Spark Plug Wire Holder - This is a Rubber Spark Plug Wire Holder used on John Deere A, B, G, 50, 60, 70 Tractors. It measures 0.755 inches thick, 0.755 inches wide and 1.375 inches long. Replaces A470R (Part No: 126684)		$6.49
Spark Plug Wire Set - This is an Original Style with Cotton Braid Wire and copper core with RAJAH terminals has one end preassembled, Crimp Other End With A Crimping Tool. Replaces AA1222R, AA1890R, AB3480R, AB3481R, AB830R, AD1415R, AD1454R, AD1544R (Part No: 178937)		$36.50
Spark Plug Wire Set - 2 cylinder spark plug wire set with 90 degree boots. For the following models: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, L, LA, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 128569)		$14.99
Speed Sensor -
  • For John Deere tractor models 5620, 5720, 5820, 6010, 6020, 6100, 6110, 6120, 6130, 6200, 6210, 6215, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6405, 6410, 6415, 6425, 6430, 6500, 6506, 6510, 6520, 6600, 6605, 6610, 6620, 6630, 6715, 6810, 6820, 6830, 6910, 6920, 6930, 7130, 7220, 7230, 7320, 7330, 7420, 7425, 7515, 7520< li>
  • Replaces John Deere OEM number AL176767< li> < UL> (Part No: 169716)
$21.00
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)$0.00
Starter - Replaces; TY6617, TY6618, TY6713, TY6701, TY6710, TY6667, RE41875, AR78538. For tractor models 4240, 8560. (Part No: 107885)		$285.00
Starter - Replaces; RE69704, RE70957. For tractor models 7610, 7710, 7810, 8110, 8110T, 8210T, 8310T, 8410T, 8120, 8220, 8320, 8420, 8520. (Part No: 113364)		$201.00
Starter - Replaces; TY1458. For tractor models 920, 1640, 1830, 2840 with 6-239 diesel, 1630, 2240 with 164 diesel, 2440, 2520, 210C, 1840, 1020, 1520, 2000, 1530, 2030, 2040 with 152 diesel, 2510. (Part No: 113951)		$133.00
Starter - For tractor models 5200, 5300 N, 5400, 210C. Replaces DELCO10461473, 10461482, 10479630, 1113283, JOHN DEERE RE49033, RE51723, RE52119, RE60654, RE64647, TY24305, LESTER6577 (Part No: 117575)		$184.00
Starter - 12 volt, 9 teeth, clockwise rotation. For model 4400 Combine. Replaces S-1443, 240048M91, 79004854, AH76330, SDR0106, SR535X, SX1015, SX1016, S2777, S2777, TY1454, TY6693, 10496877, 1107233, 1107273, 1107274, 1107315, 1107497, 1107643, 1107664, 1107688, 1107889, 1107891, 1108332, 1108355, 1108360, 1108368, 1108372, 1108486, 1108489, 1108784, 1108787, 1108793, 1109078, 1109099, 1400-0181, 1876553, 1938508, 1998256, 1998275, 1998473, 2-1601-DR, 248048M91, 323-371, 351088, 3635, 3635-S, 3635-SN, 3635-WS, 44-4387, 46-4803, 50-34105, 91-01-3821. Note: This starter is also used in many Chevy GM vehicles 1957-1990. Verify starter number. (Part No: 117727)		$145.00
Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust Const, 301 Indust Const, 301A Indust Const, 302 Indust Const, 310 Indust Const, 310A Indust Const, 310B Indust Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust Const, 401 Indust Const, 401A Indust Const, 401B Indust Const, 401C Indust Const, 401D Indust Const, 410 Indust Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Part No: 160375)		$205.00
Starter - 12 volt, 13 tooth, CW rotation. For tractor models (45 1966-70 with 202 dsl), (55 1967-70 with 303 dsl), (95 1966-70 with 303 dsl), (932, 942, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1177, (2254 to SN# 68583), (3300 1971-77 with 219 dsl), (4400 1970-82 with 329 dsl), (4420 1980-86 with 359 dsl), (4425 1986-88 with 539 sl), (4435 1989-94 with 539 dsl), (6600 1973-74 with 329 gas), (6600 1973-77 dsl), (482 1979 dsl), (484 1979 with 329 or 359 dsl), (499, 699 1973-79 with 329 dsl), (6000 1975-78 with 219 dsl), (7440 1984-86 with 359 dsl), (7445 1987-94 with 359 dsl), (9900 1975-78 with 329 dsl), (9910, 9920 1984-87 with 359 dsl), (9930 1987-93 with 359 dsl), (600, 700, 734 1973-78 with 152 dsl), (6500 from 1995 & up), (940 1980-84), (940 built in Spain), (940V SN# 126012 & up), (1040 1970-84), (1040, 1040V SN# 126012 & up), (1140 1970-82). Replaces 1107863, 1362312, 1367075, 1107871, 1998367. (Part No: 156209)		$166.00
Starter - 12 volt, clockwise rotation, 13 tooth. For tractor models 1350, 1445F, 1550, (1630 1973-82), (1640, 1640F SN# 126012 & up), 1745F, 1750, 1750V, (1830 1973-82), (1840 1970-82), (1840, 1840F SN# 126012 & up), 1845F, 1850, 1850F, 1850V, 1950, 1950F, (2040 1976-82 with 3-164 dsl), 2040, (2040F, 2040S SN# 126012 & up), (2140 1974-82), (2140 SN# 126012 & up), 2155, 2250, 2250F, 2345F, (2355 1987-92), (2440 1976-82 with 4-219 dsl), 2450, 2450F, (2510 1965-68 with 4-203 dsl), (2520 1967-73 with 4-219 dsl), (2555 1987-92 with 4-239 dsl), 2650, 2650F, (2750 1983-86 with 4-239 dsl), (2755 1987-92 with 4-239 dsl), (2840 1977-79 with 6-329 dsl), 2850, 2855N, (2940, 1980-84 with 6-359 dsl), (2950 1983-86 with 6-359), (2955 1987-92 with 6-359 dsl), (3030 1979-82), (3040 1980-84), 3050, (3055 1992 with 6-359 dsl), (3130 1979-82 6-359 dsl), (3140 1970-82 with 6-359 dsl), (3140 SN# 126012 & up). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Part No: 156209)		$166.00
Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models (3150 1985-87 with 6-359 dsl), (3150 built in Spain), (3155 1987-92 with 6-359 dsl), (3340 SN# 125745 & up), 3350, 3640, 3650, 5620, 6010, (6100 from 1993 & up), 6110, 6110L, (6200, 6200L, 6300, 6300L, from 1993 & up), 6210, 6210L, 6310, 6310L, 6310S, (6400 from 1993 and up with 4-276 dsl), (6400L from 1993 & up), 6400SP, 6405, 6410, 6410L, 6410S, (6500 from 1993 & up), 6500L, 6510L. Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Part No: 156209)		$166.00
Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models 1133, (820 1968-72 with 3 cyl), (830 1972-75 with 3 cyl), 840, (920 1970-75), (1020 1965-73 with 152 dsl), (1520 1968-73 with 164 dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 202 dsl), (2030 1971-75 with 219 dsl), (2040 1972-85 with 152 dsl), (2150 1982-87 with 3-179 dsl), (2155 1987-92 with 3-179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 3-179 dsl), (2350 1983-86 with 4-239 dsl), (2355 1986-92 with 4-239 dsl), (2550 1982-87 with 4-239 dsl), (880 1970-80 with 202 dsl), (270 1975-78 with 4-219 dsl), (2280 1975-85), (2320 1981-83 with 4-219 dsl), (2360 1984-93 dsl), (2420 1975-85 with 219 dsl). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Part No: 156209)		$166.00
Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models 1085, (2056, 2058, 2064, 2066 1993 & up), (6600, 6602, 7700 79-82 with 404 dsl), (6620 1979-88 with 466 dsl), (6622 1980-85 with 466 dsl), (7720 79-89 with 466 dsl), (8820 1980-92 with 466 dsl), (9500, 9600 1989-93 with 466 dsl), (9940 1983-86 with 466 dsl), (9950 1987-90 with 466 dsl), (9960 1987-93 with 466 dsl), (9965 from 1993 & up), 544, (5200 1974-77 with 404 dsl), 5420, (5440 1977-82 with 404 dsl), (5720 1982-86 with 466 dsl), (5730, 5830 1986-92 with 466 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4055 1989-92 with 466 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4255 1989-92 with 466 dsl), 4350, (4440 1978-82 with 466 dsl), (4450 1983-90 with 466 dsl), (4455 1989-92 with 466 dsl and all made in Mexico), (4555 1989-92 with 466 dsl), (4560 1992-94 with 466 dsl), (4640 1978-82 with 466 dsl). Replaces 028000-3292, 228000-4601, 128000-5972, 028000-3290, 128000-0770. (Part No: 107885)		$285.00
Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (4650 1983-88 with 466 dsl), (4755 1989-92 with 466 dsl), (4760 1992-94 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (4955 1989-92 with 466 dsl), (4960 1992-94 with 466 dsl), (4975 1989-92 with 466 dsl), (7700, 7800 from 1993 & up), (8100, 8200, 8300 from 1994 & up with 466 dsl to SN# 9999). Replaces 028000-3292, 228000-4601, 128000-5972, 028000-3290, 128000-0770. (Part No: 107885)$285.00
Starter - 12 volt, 11 tooth, clockwise rotation. For tractor models (1550 with 8.1L eng.), (2256, 2258 SN# 68584 and up), 2264, 2266, 9410, 9450, 9510, 9540, 9550, 9550SH, 9560, 9560SH, 9580, 9610, 9640, 9650, 9660, 9680, 9750STS, 9760CTS, 9780CTS, 9970, 9976, 9986, 6650, 7200, 7300, 7400, 7500, 4720, 4920, (7810 from 1996 on with 6-466 dsl SN# 19637 & up), (7815 with 6086 dsl), (7820 with 6086 or 6081 dsl), (7920 with 6081 dsl), (8100T, 8200T, 8300T, 9100 from 1997 on with 6-466 dsl), 8110, 8110T, 8120, 8210, 8210T, 8220, 8220T. Replaces 228000-6530, 228000-6531, 228000-6532. (Part No: 113364)		$201.00
Starter - 12 volt, 11 tooth, clockwise rotation. For tractor models 8310, 8310T, 8320, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T, 9120, 3120, 4995. Replaces 228000-6530, 228000-6531, 228000-6532. (Part No: 113364)		$201.00
Starter - 12 volt, 11 tooth, clockwise rotation. For tractor models 425 Hay cuber, (8650 1982-84 with 6-619 diesel). Replaces 1114985. (Part No: 113686)		$380.00
Starter - 12 volt, 10 tooth, clockwise rotation, externally rotatable nose. For tractor models (105 1963 to 1970 with 404 diesel), (3020 1969 to 1972 with 270-4 cylinder diesel), (6602, 7700 1971 to 1974 with 404 diesel), (4000, 4020, 3020 1969 to 1972 with 404 diesel), (4030 1973 to 1974 with 329 diesel), (4230 1973 to 1975 with 404 diesel), (4320 1969 to 1973 with 404 diesel), (4430 1973 to 1975 with 404 diesel), (4520, 4620 1969 to 1973 with 404 diesel), (4630 1973 to 1975 with 404 diesel), (7020 1971 to 1975 with 404 turbo diesel). Replaces 1113656, 1113402, 1113672. (Part No: 102202)		$305.00
Starter - 12 volt, 9 tooth, clockwise rotation. For model : 4400 1970-72 with 292 gas engine. Replaces 1108489, 1108368. (Part No: 117727)		$145.00
Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models 6100, (6500 from 1995 on), 6600, 3100, 3110, 3200, 3210, 3300, 3310, 3400, 3410. Replaces AZJ3274, AZJ3283, AZJ38181. (Part No: 109770)		$171.00
Starter - 12 volt, 15 tooth, clockwise rotation. For model (F1145 from 1992 on with 3TN75 eng.), (650 1981-89 with 3T90 dsl), (670 1989-96), (750 1981-88 with 3T80 dsl), (770 1989-96), (850 1978-88 with 3T80 dsl), (855 1995 with 3T72 eng.), (856 1986-90 with 3T72 eng.), (870 1989-96), (900HC 1986-89), (955 1990-95 dsl), (970, 1070 1989-96 dsl). Replaces 128000-0740, 028000-5730, 228000-0140. (Part No: 113231)		$97.00
Starter - 12 volt, 9 tooth, counter clockwise rotation. For tractor models LX178 from 1991 on, LX188 from 1992 on, 285 from 1987-92, 345 from 1995 on all with Kawasaki engines, 2243 from 1990 on with FD590V engine. Replaces 128000-5500. (Part No: 113398)		$95.20
Starter - 12 volt, 9 tooth, counter clockwise rotation. For model 165 1986-88 with Kawasaki engine. Replaces 128000-2890. (Part No: 185188)		$134.00
Starter - 12 volt, 9 tooth, counter clockwise rotation. For tractor models (185 1986-90 with Kawasaki engine), (425 from 1993 on). Replaces 128000-7070, 128000-9360. (Part No: 156589)		$81.00
Starter - 12 volt, 15 tooth, clockwise rotation. For tractor models (4500 from 1999 on with Yanmar 39 HP dsl), (4510 from 2002 on with Yanmar 39 HP dsl), (4600 from 1999 on with Yanmar 43 HP dsl), (4610 from 2002 on with 44 HP dsl), (4700 from 2000 on with Yanmar 48 HP dsl), (4710 from 2002 on with Yanmar 48 HP dsl). Replaces 228000-7111. (Part No: 113335)		$145.92
Starter - This is a new Bosch design starter. 12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses AL55046 solenoid and AL25275 drive. Uses correct 13.5mm mounting hole diameter on DE. Fits multiple John Deere Tractors. Replaces; John Deere part numbers: AL110597, AR70436, AT23401, SE501411, SE501412, TY25290, TY25292, TY6720, TY6726, TY6780. (Part No: 109770)		$171.00
Starter - 24 Volt, for Diesel Tractors 3010, 3020, 4010, 4020. Starter assembly (CW rotation 10 tooth) with solenoid for 24 volt system. Can replace original Delco 1113148. AR11138, AR28053, AR40134, SE501445, TY1470, TY2666, TY6622, TY6703, SDR0156. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 122662)		$355.00
Starter - Rebuilt Starter. Internally rotatable nose. Core Charge $80.00. For Diesel Tractors 3020 SN# 123000 & up, 4000, 4020 SN# 201000 & up, 4030, 4230, 4320, 4520, 4620, 7020. Starter Assembly with new solenoid for 12 volt system. Can replace original Delco 1113402, 1113672 and TISCO starter 83701-EX. There is an additional shipping cost for this product: $20.00 (Part No: 203142)$435.01
Starter - This is a new Bosch design starter. 12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses AL55046 solenoid and AL25275 drive. Uses correct 13.5mm mounting hole diameter on DE. Fits multiple John Deere Tractors. Replaces; John Deere part numbers: AL110597, AR70436, AT23401, SE501411, SE501412, TY25290, TY25292, TY6720, TY6726, TY6780. (Part No: 109770)		$171.00
Starter - This is a 12 volt starter, clockwise rotation, 10 tooth drive, DD Delco 35MT Type. Rotatable DE housing. Note, check clearance on some JD models, may have interference issues on starter motor height when models have drop type manifold is used. For models 3010, 3020, 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320 Compact Tractor, 4430, 4440, 444C Indust Const, 444D Indust Const, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 500A Indust Const, 500C Indust Const, 5400, 544C Indust Const, 544E Indust Const, 544G Indust Const, 570 Grader, 570A Grader, 5720 Forage Harvester, 5820 Forage Harvester, 624E Indust Const, 643D Feller Buncher, 644C Indust Const, 644D Indust Const, 646C Compactor, 690 Excavator, 690A Excavator, 690B Excavator, 693B Feller Buncher, 7020, 740A Skidder, 8430, 8440, 8450, 8640, 8650. Also replaces SE501446. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 112400)		$275.00
Starter - The length of this starter is 12.250 inches over all. Many of the models listed have a very tight space for the stater. This is a 12 volt, Delco style starter with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Part No: 113951)		$133.00
Starter - Delco Style Starter, for gas models 1010 and 2010. 1960-68. 9 teeth, CW rotation. Replaces Delco: 1107280, 1107326, 1107879. Replaces John Deere AT12283, AT16311, TY1434, TY6629, TY6704, SE501437, TY26038 (Part No: 160369)		$194.00
Starter - For 4040, 4240, 4440, 8450. Starter. Also replaces S-AL67897, S-RE41748, S-AL41247. (Part No: 107885)		$285.00
Starter -
  • For John Deere tractor models 5045D, 5045E, 5050E, 5055D, 5055E, 5065E, 5075E, 5103, 5203, 5303, 5403, 5503< li>
  • Replaces John Deere OEM number RE553507, RE533976< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • Type: Bosch< li>
  • Volts: 12< li> < UL> (Part No: 173434)
$342.50
Starter, 12 Volt - Fits Yanmar Engine in: 650, 950, 1050, and Yanmar 3T90 Diesel in: 1250, 1450, 1650. Clockwise rotation, 15 teeth. Replaces SE501448, TY6649, TY6674, TY6716 (Part No: 113950)		$234.00
Starter - 6 Volt - This Rebuilt starter has 10 teeth, counter clockwise rotation, 6 Volt. For tractor models M 1954-55, 320 and 330 1956-60, 40 1953-55, 420 1952-53. Replaces 1107127, 1107200, AM1802T and AT16881. No bolt holes on nose cone. There is an additional shipping cost for this product: $5.00. Additional Core Charge $100.00. This additional charge will be added to your order. (Part No: 203427)$342.01
Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing Bushing Stop: 0.823 inches, Drive End to Bearing Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Part No: 182636)$79.00
Starter Assembly - 12 volt, diesel, 10 teeth, noseless version, gear drive reduction. For tractor models 5210, 5310, 5410. Replaces, RE49033, RE501157, RE501693, RE502156, RE505746, RE516157, RE54092, RE60641, RE68470, TY24438, TY6688, TY6719; Denso # 028000-8400, 028000-8401, 028000-8402, 028000-8403, 028000-8404, 228000-6470, 228000-6471; Iskra # IS1027. (Part No: 156209)		$149.39
Starter Assembly - 24 volt, diesel, 10 teeth, dust proof. For tractor models 244H, 444H, 544H. Replaces AT211816, RE501769, RE503632, RE504915, RE71007; Iskra # IS0745. (Part No: 164970)		$308.40
Starter Assembly - 12 volt, diesel, 10 teeth, gear drive reduction. For tractor models 310, 315G series. Replaces, RE504244, RE506105; Iskra IS0794. (Part No: 155226)		$228.00
Starter Assembly - 12 volt, diesel, 10 teeth, gear drive reduction. For tractor models 260, 270, 280. Replaces RE504814, RE5057670, RE516157; Iskra # IS0793. (Part No: 156216)		$285.00
Starter - Bosch PLGR (18359), Bosch, 0-001-230-005, RE500819 -
  • For John Deere tractor models 5080M, 5080R, 5090M, 5210, 5310, 5410, 5415, 5420, 5510, 5520, 5615, 5715, 6120, 6120L, 6205, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420, 6420L, 6520L< li>
  • Compatible with John Deere Combine(s) 2254< li>
  • Replaces John Deere OEM number RE500819, RE501689, RE519975, SE501854, RE501298, SE5011402, SE501425< li>
  • Replaces Bosch manufacturer number 0-001-230-005< li>
  • Replaces manufacturer number 18359, 120-6042, 91-15-7088< li>
  • Bosch Style - Planetary Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 114712)
$190.00
Starter - Bosch PLGR (18361) -
  • For John Deere tractor models 6505, 6510, 6510S, 6515, 6520, 6605, 6610, 6615, 6620, 6715, 6810, 6820, 6910, 6920, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number RE503226, RE504807< li>
  • Replaces Bosch manufacturer number 0-001-230-002< li>
  • Replaces manufacturer number 18361, 120-6111, IS 1157, LRS01563< li>
  • Bosch Style - Planetary Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 153455)
$171.00
Starter - Bosch Style DD (17095), Remanufactured, Bosch, 0-001-367-075, TY25974 -
  • For John Deere tractor models 840 (s n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840 (s n 429999-earlier), 1850, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 6010, 6100, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6510L, 6510S< li>
  • Compatible with John Deere Combine(s) 2054, 2056, 2254< li>
  • Compatible with John Deere Engine(s) 3029, 3179 (D T), 4039 (D T), 4045 (D T)< li>
  • Replaces John Deere OEM number TY25974, TY6780, AL110597, SE501427, AL41247, AL62690< li>
  • Replaces Bosch manufacturer number 0-001-367-075, 0-001-362-316, 0-001-362-312< li>
  • Replaces manufacturer number 17095< li>
  • Bosch Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • Mounting Type: Flange< li>
  • Mounting Holes: 2< li>
  • For a New version of this sku use Item #: 109770< li> < UL> (Part No: 203191)
$331.01
Starter - Bosch Style DD (19655) -
  • For John Deere tractor models 6506, 6600, 6605, 6800, 6900, 7500< li>
  • Replaces John Deere OEM number RE501157, AL81154< li>
  • Replaces Bosch manufacturer number 0-001-367-081, 0-001-367-077< li>
  • Replaces manufacturer number 19655, 120-6110, IS 1027, LRS01622, 91-15-7151< li>
  • Bosch Style Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 156172)
$237.00
Starter Bracket - For tractor models 720, 730 Diesel with Electric Start. Starter Bracket. (Part No: 179956)		$390.00
Starter Brushes, Carbon, Set of 4 -
  • For John Deere tractor models A, 60, 720, 730< li>
  • Replaces Delco Remy Starter number 1906909< li>
  • Set of 4 Carbon Starter Brushes< li> < UL> (Part No: 184440)
$12.20
Starter, Delco - Delco Starter, for gas models 1010 and 2010. 1960-68. 9 teeth, CW rotation. Add $50.00 Core Charge. This additional charge will be added to your order. Replaces Delco: 1107280, 1107326, 1107879. Replaces John Deere AT12283, AT16311, TY1434, TY6629, TY6704, SE501437, TY26038 (Part No: 203464)		$331.01
Starter - Delco (4522) -
  • For John Deere tractor model 1010 (145 Diesel, 1960-62)< li>
  • Replaces John Deere OEM number AP22652, AT12458, AT15334, AT16209, TY1457, TY6695< li>
  • Replaces Delco Remy manufacturer number 1107523, 1107556, 1107571, 1108672< li>
  • Replaces Alternator number 4522< li>
  • Volts: 12< li>
  • Rotation: CW< li>
  • Direct Drive< li>
  • Teeth: 9< li> < UL> (Part No: 189413)
$325.00
Starter - Delco Style (3798), Remanufactured, Delco Remy, 1113830, AR11073 -
  • For John Deere tractor models 80, 720, 730, 820, 830< li>
  • Compatible with John Deere Construction & industrial models 644B< li>
  • Replaces John Deere OEM number AR11073, AR102776< li>
  • Replaces Delco Remy manufacturer number 1113830, 1113801< li>
  • Replaces manufacturer number 3798< li>
  • Voltage: 24< li>
  • Rotation: Clockwise< li>
  • Teeth: 13< li> < UL> (Part No: 204401)
$630.01
Starter - Delco Style (3805), Remanufactured, Delco Remy, 1113304, TY1471 -
  • For John Deere tractor model 720< li>
  • Replaces John Deere OEM number TY1471, AF2673R, AF3758R< li>
  • Replaces Delco Remy manufacturer number 1113304, 1113341< li>
  • Replaces manufacturer number 3805< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 204402)
$980.01
Starter - Delco Style (4105), Remanufactured, Delco Remy, 1108656, AT11229 -
  • For John Deere Construction & industrial models 435, 440< li>
  • Replaces John Deere OEM number AT11229, AT15336< li>
  • Replaces Delco Remy Starter number 1108656, 1108654< li>
  • Replaces manufacturer number 4105< li>
  • Delco Style < li>
  • Voltage: 12< li>
  • Rotation: Counter Clockwise< li>
  • Teeth: 10< li>
  • For Solenoid use Item #: 105675< li> < UL> (Part No: 209999)
$550.01
Starter - Delco Style (4154), Remanufactured, Delco Remy, 1108094, TY26004 -
  • For John Deere tractor model 440< li>
  • Compatible with John Deere Combine(s) 45 (s n 008432-021500)< li>
  • Compatible with John Deere Construction & industrial model 440 (I)< li>
  • Compatible with John Deere Engine(s) 145 (s n 025000-earlier)< li>
  • Replaces John Deere OEM number TY26004, AT11324, AT16882, AT409T, TY1453, TY6633, AT16883, SE501429< li>
  • Replaces Delco Remy manufacturer number 1108094, 1108093, 1107166, 1107175< li>
  • Replaces manufacturer number 4154< li>
  • Voltage: 6< li>
  • Rotation: Counter Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 203439)
$375.01
Starter - Delco Style (4165), Remanufactured, Delco Remy, 1107725, TY6696 -
  • For John Deere tractor model 530< li>
  • Replaces John Deere OEM number TY6696, AR11010R, TY1460, TY6636< li>
  • Replaces Delco Remy manufacturer number 1107725< li>
  • Replaces manufacturer number 4165< li>
  • Delco Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 9< li> < UL> (Part No: 203443)
$999.01
Starter - Delco Style (4362), Remanufactured, Delco Remy, 1107942, TY26041 -
  • For John Deere tractor model B (s n 201000-later)< li>
  • Replaces John Deere OEM number TY26041, AB3700R, AB4094R, AR11151, TY1462, TY6642< li>
  • Replaces Delco Remy manufacturer number 1107942, 1107193< li>
  • Replaces manufacturer number 4362< li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Teeth: 9< li> < UL> (Part No: 203467)
$395.01
Starter - Delco Style (4393), Remanufactured, Delco Remy, 1107522, TY26007 -
  • For John Deere tractor models 3020 (s n 130261-later), 4000 (s n 201000-later), 4010, 4020< li>
  • Compatible with John Deere Combine(s) 55 (s n 083001-later), 95< li>
  • Compatible with John Deere Harvester(s) 99 (s n H2248-H3653)< li>
  • Replaces John Deere OEM number TY26007, AR11305, AT15335, TY1456, TY6694, AR11161, SE501432< li>
  • Replaces Delco Remy manufacturer number 1107522, 1107546, 1107578, 1109145, 12301338< li>
  • Replaces manufacturer number 4393< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 9< li> < UL> (Part No: 203471)
$365.01
Starter - Delco Style (4422), Remanufactured, Delco Remy, 1108144, AB4649R -
  • For John Deere tractor models 50, 520< li>
  • Replaces John Deere OEM number AB4649R, AB4660R, AB4860R, AR11152, TY1464, TY6638, TY26040< li>
  • Replaces Delco Remy manufacturer number 1108144, 1108155< li>
  • Replaces manufacturer number 4422< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 9< li> < UL> (Part No: 203473)
$365.01
Starter - Delco Style (4647), Remanufactured, Delco Remy, 1108914, AA3262R -
  • For John Deere tractor models A (s n 584000-later), AO (s n 272000-later), AR (s n 272000-later)< li>
  • Replaces John Deere OEM number AA3262R, AA4930R< li>
  • Replaces Delco Remy manufacturer number 1108914< li>
  • Replaces manufacturer number 140-0998, 4647< li>
  • Delco Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li> < UL> (Part No: 205557)
$570.01
Starter - Delco Style (4650), Remanufactured, Delco Remy, 1108919, AF1138R -
  • For John Deere tractor model G< li>
  • Replaces John Deere OEM number AF1138R, AF696R< li>
  • Replaces Delco Remy manufacturer number 1108919< li>
  • Replaces manufacturer number 4650, 140-0963< li>
  • Delco Style< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • For Starter Drive use Item #: 107474< li> < UL> (Part No: 203481)
$570.01
Starter - Delco Style (4679), Remanufactured, Delco Remy, 1108981, AF1392R -
  • For John Deere tractor model 70 (LP Gas)< li>
  • Replaces John Deere OEM number AF1392R, AR11159R, AF1578R, TY6640< li>
  • Replaces Delco Remy manufacturer number 1108981, 1108990< li>
  • Replaces manufacturer number 4679< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 203483)
$620.01
Starter - Delco Style DD (3708), Remanufactured, Delco Remy, 1113135, TY6703 -
  • For John Deere tractor models 500, 600, 3010 (s n 049999-earlier), 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123113-earlier)< li>
  • Replaces John Deere OEM number TY6703, AR11138, AR28053, AR40134, TY1470, TY2666, TY6622, SE501445< li>
  • Replaces Delco Remy manufacturer number 1113135, 1113147, 1113148, 1113190, 12301359< li>
  • Replaces manufacturer number 3708< li>
  • Delco Style: Direct Drive< li>
  • Voltage: 24< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • Mounting Type: Flange< li>
  • Mounting Holes: 3< li>
  • For Solenoid use Item #: 105697< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 203199)
$460.01
Starter - Delco Style DD (3863), Remanufactured, Delco Remy, 1113092, AR11011 -
  • For John Deere tractor model 630< li>
  • Replaces John Deere OEM number AR11011, TY6644, TY6708< li>
  • Replaces Delco Remy manufacturer number 1113092< li>
  • Replaces manufacturer number 3863< li>
  • Delco Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 203412)
$630.01
Starter - Delco Style DD (3864), Remanufactured, Delco Remy, 1113093, TY6709 -
  • For John Deere tractor model 730 (gas)< li>
  • Replaces John Deere OEM number TY6709, AR11012, TY1469, TY6645< li>
  • Replaces Delco Remy manufacturer number 1113093< li>
  • Replaces manufacturer number 3864< li>
  • Delco Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 203413)
$710.01
Starter - Delco Style DD (4063), Remanufactured, Delco Remy, 1107155, AR1203R -
  • For John Deere tractor models 80, 720, 730, 820, 830< li>
  • Replaces John Deere OEM number AR1203R< li>
  • Replaces Delco Remy manufacturer number 1107155< li>
  • Replaces manufacturer number 4063, 140-091, 91-01-3675< li>
  • Delco Style: Direct Drive< li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Teeth: 16< li> < UL> (Part No: 203429)
$405.01
Starter - Delco Style DD (4678), Remanufactured, Delco Remy, 1108950, AA4002R -
  • For John Deere tractor models A (s n 584000-later), AO (s n 272000-later), AR (s n 272000-later), 60< li>
  • Replaces John Deere OEM number AA4002R, AA4931R, AA6044R, AR11150, TY6630< li>
  • Replaces Delco Remy manufacturer number 1108950, 1108989, 1103004< li>
  • Delco Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 203211)
$690.01
Starter - Delco Style DD (6278) -
  • For John Deere Construction & industrial models 344G, 370, 444G, 570B, 655, 655B, 670A, 670B, 670C, 672A, 672B, 690D, 690ELC, 693D, 750B, 750C, 750CII, 755A, 755B, 762B, 770B, 770C, 772B, 772CH, 790D, 790ELC, 792, 793, 850B, 850C, 850CII, 892< li>
  • Compatible with John Deere Engine(s) 6329D, 6414D, 6414T< li>
  • Replaces John Deere OEM number RE38632, RE43300, RE48077, RE48134, RE53404, RE53575, RE59586, RE59594, RE65175, RE65189, RE85188, SE501408, SE501410, TY24926, TY24928, TY6797< li>
  • Replaces Delco Remy manufacturer number 10461015, 10461040, 10478814, 10478819, 10479179, 10479181, 1993701, 1993829, 1993917< li>
  • Replaces manufacturer number 6278, 6397, 6277, 6466, 141-359, 141-358, 141-354, 141-354A, 141-355E, 141-355D, 91-01-4299< li>
  • Used On: Bell (1997-2006), John Deere (1975-2007), Perkins (1986-1986)< li>
  • Delco Style Direct Drive< li>
  • Delco Style - 37MT< li>
  • Voltage: 24< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • This unit contains an isolation ground stud< li> < UL> (Part No: 160478)
$355.00
Starter - Delta (4515) -
  • For John Deere tractor models 1010 (Diesel), 2010 (Diesel)< li>
  • Replaces John Deere OEM number AT17411< li>
  • Replaces Delco Remy manufacturer number 1107573< li>
  • Replaces Starter number 4515< li>
  • Lester 4515< li>
  • Volts: 12< li>
  • Rotation: Clockwise (CW)< li>
  • Type: Direct Drive (DD)< li>
  • Teeth: 10< li> < UL> (Part No: 189447)
$322.00
Starter - Denso (30692) -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 8245R, 8270R, 8295R, 8320R, 8320RT, 8345R, 8345RT, 8370R, 8370RT, 9360R, 9370R< li>
  • Compatible with John Deere Combine(s) S650, S660, T550, T560, T660, T670, W540, W550, W650, W660< li>
  • Compatible with John Deere Construction & industrial models 250D, 300D, 310K, 310KEP, 310SK, 310SKTC, 410K, 410KTC, 670G, 670GP, 710K< li>
  • Replaces John Deere OEM number SE502558, RE539696, RE548692, RE548694, RE549229< li>
  • Replaces Starter number 30692< li>
  • Replaces Denso manufacturer number 428080-5741, 428000-574, 428000-5740, 428000-5741, 428000-7340, 428000-7341, 428080-5740< li>
  • Style: Denso PA90S< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • Starter Drive: Planetary Gear Reduction (PLGR)< li> < UL> (Part No: 189506)
$485.00
Starter - Denso Style DD (16635), Remanufactured, Denso, 028000-3290, AR41627 -
  • For John Deere tractor models 4030, 4040, 4050, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5420, 5720, 6030, 6600, 6620, 7020, 7700, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 1085, 6602, 6622, 7720, 7722, 8820, 9500< li>
  • Compatible with John Deere Harvester(s) 5440, 5720, 5730, 5830, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 444, 444C, 444D, 500C, 510, 544, 544A, 544B, 544D, 544E, 544G, 570, 570A, 624E, 624G, 643, 643D, 644C, 644D, 644E, 644G, 690, 690A, 690B, 693B, 740, 740A, 743, 743A< li>
  • Compatible with John Deere Engine(s) 6059, 6068, 6076, 6466A, 6466D, 6466T< li>
  • Replaces John Deere OEM number AR41627, AR55639, AR77254, RE13722, RE41875, SE501414, TY6617, TY6713, TY25960< li>
  • Replaces Denso manufacturer number 028000-3290, 028000-3291, 028000-3292, 128000-0770, 128000-0771, 128000-0772, 9702800-329, 9712809-077< li>
  • Replaces manufacturer number 16635< li>
  • Denso Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • Mounting Type: Flange< li>
  • Mounting Holes: 3< li>
  • For diesel applications< li>
  • For a New version of this sku use Item #: 107885< li> < UL> (Part No: 203193)
$620.01
Starter - Denso Style DD (16641), Remanufactured, Denso, 028000-3810, AR46886 -
  • For John Deere tractor models 5020 (s n 025000-later), 6030, 7520, 8630, 8640, 8650< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5460, 5820< li>
  • Compatible with John Deere Construction & industrial models 644B, 700A, 760A< li>
  • Compatible with John Deere Engine(s) 6531 (F), 6619A (F), 6619T (F)< li>
  • Replaces John Deere OEM number AR46886, AR62154, TY6612, TY6711, TY25963< li>
  • Replaces Denso manufacturer number 028000-3810, 9702800-381, 028000-3811< li>
  • Replaces manufacturer number 16641< li>
  • Denso Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 12< li> < UL> (Part No: 204174)
$670.01
Starter - Denso Style DD (17618), Remanufactured, Denso, 128000-5970, TY25966 -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8560< li>
  • Compatible with John Deere Combine(s) CTS, 2056, 2058, 2064, 2066, 9500, 9600, 9650< li>
  • Compatible with John Deere Harvester(s) 9960, 9965< li>
  • Compatible with John Deere Construction & industrial models 410D, 510D, 640E, 710D< li>
  • Compatible with John Deere Engine(s) 6059, 6068, 6076, 6466A, 6466D, 6466T< li>
  • Replaces John Deere OEM number TY25966, RE38336, RE41757, RE43266, RE43423, RE54416, RE56053, TY6731, TY6781, SE501420, RE59589, RE61516, RE65176< li>
  • Replaces Denso manufacturer number 128000-5970, 128000-5971, 128000-5972, 128000-5973, 228000-2360, 228000-2361, 9712800-597, 228000-4600, 228000-4601< li>
  • Replaces manufacturer number 17618, 190-853, 91-29-5168, 190-853B< li>
  • Denso Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • For a New version of this sku use Item #: 162322< li> < UL> (Part No: 204211)
$620.01
Starter - Denso Style DD (18177) -
  • For John Deere tractor models 4030, 4040, 4050, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5420, 5720, 6030, 6600, 6620, 7020, 7700, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 1085, 6602, 6622, 7720, 7722, 8820, 9500< li>
  • Compatible with John Deere Harvester(s) 5440, 5720, 5730, 5830, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 444, 444C, 444D, 500C, 510, 544, 544A, 544B, 544D, 544E, 544G, 570, 570A, 624E, 624G, 643, 643D, 644C, 644D, 644E, 644G, 690, 690A, 690B, 693B, 740, 740A, 743, 743A< li>
  • Compatible with John Deere Engine(s) 6059, 6068, 6076, 6466A, 6466D, 6466T< li>
  • Replaces John Deere OEM number RE41875, SE501420, TY25960, TY25966, TY6781, SE501414< li>
  • Replaces manufacturer number 18177, S-8033< li>
  • Replaces Denso manufacturer number 128000-591, 128000-5910, 128000-5911, 128000-5912, 128000-5913, 128000-7570, 128000-7571, 128000-7572, 128000-7573, 9712809-591, 9712809-757< li>
  • Replaces Lucas manufacturer number S9947< li>
  • Denso style direct drive< li>
  • Voltage: 12< li>
  • Rotation: clockwise< li>
  • Teeth:11< li> < UL> (Part No: 189501)
$298.00
Starter - Denso Style OSGR (18018) -
  • For John Deere tractor models 7710, 7810, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8330, 8410, 8420, 8520, 9100, 9120< li>
  • Compatible with John Deere Combine(s) 9400, 9410, 9450, 9510, 9550 SH, 9560, 9560 SH, 9560 STS, 9610, 9650, 9650 CTS, 9650 STS, 9660, 9660 STS, 9750 STS, 9760 STS< li>
  • Replaces John Deere OEM number RE70957, RE69704< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li>
  • Mounting: Flange< li>
  • Mounting Holes: 3< li> < UL> (Part No: 167504)
$255.00
Starter - Denso Style OSGR (18456) -
  • For John Deere tractor models 6100D (s n 050000-earlier), 6110D, 6115D, 6125D, 6130D, 6140D< li>
  • Compatible with John Deere Engine(s) 3029, 3029T, 4039 (s n 699999-earlier), 4045 (s n 699999-earlier), 4045T (s n 699999-earlier), 6068, 6068D, 6068H, 6068T< li>
  • Compatible with John Deere Hay Cutting(s) 4890, 4895< li>
  • Replaces John Deere OEM number RE59588, RE50165, RE540301, RE54091, SE501401, TY24436< li>
  • Replaces Denso manufacturer number 228000-0840, 228000-0841, 228000-0842, 228000-0843, 228000-0844< li>
  • Replaces manufacturer number 18456, 190-9027, 91-29-5322< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 125423)
$195.00
Starter - Denso Style OSGR (18456) -
  • For John Deere tractor models 6100D, 6110D, 6115D, 6125D, 6130D, 6140D< li>
  • Replaces John Deere OEM number RE50165, RE54091, RE59588, TY24436< li>
  • Replaces Denso manufacturer number 228000-0840, 228000-0841, 228000-0842, 228000-0844< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 12V< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 167400)
$295.00
Starter - Denso Style OSGR (18568) -
  • For John Deere Construction & industrial models 210LE, 210LJ, 310G, 310J, 310SG, 310SJ, 315SG, 325J, 410G, 410J< li>
  • Replaces John Deere OEM number RE529661, RE506105, SE501853, RE504244, RE528619, RE70473, RE70959, SE501866, TY24440< li>
  • Replaces Denso manufacturer number 228000-9140, 228000-6540, 228000-6541, 428000-4080< li>
  • Replaces manufacturer number 18568, 190-890B, 91-29-5579< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li>
  • Wet clutch< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128258)
$223.00
Starter - Denso Style OSGR (18569) -
  • For John Deere Construction & industrial models 110, 120, 2054, 2154, 2454, 2554, 2954< li>
  • Replaces John Deere OEM number RE500199, RE500345, TY24444, SE501407, SE501704, RE70475, RE70961< li>
  • Replaces Denso manufacturer number 228000-7010, 228000-7011, 228000-7012, 228000-6570, 228000-6571, 228000-6572< li>
  • Replaces manufacturer number 18458, 18569, 190-6055, 190-9043, 190-9043A, 91-29-5610, 91-29-5459, 91-29-5510< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 24< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 119067)
$191.00
Starter - Denso Style OSGR (18978) -
  • For John Deere Construction & industrial models 360D, 560D, 740, 840, 848H< li>
  • Replaces John Deere OEM number AT195414, RE502811, RE506079< li>
  • Replaces Denso manufacturer number 228000-8470< li>
  • Replaces manufacturer number 18978, 190-6064, 91-29-5558< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 119074)
$290.00
Starter - Denso Style OSGR (19853) -
  • For John Deere tractor models 9330, 9410R, 9430, 9430T, 9460R, 9460RT, 9510R, 9510RT, 9530, 9530T, 9560R, 9560RT, 9630, 9630T< li>
  • Compatible with John Deere Combine(s) S680, S680 STS< li>
  • Replaces John Deere OEM number RE533091, RE525468< li>
  • Replaces Denso manufacturer number 428000-5532, 428000-5530, 428000-5531< li>
  • Replaces manufacturer number 19853, 190-6370< li>
  • Denso Style: Offset Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 11< li> < UL> (Part No: 156185)
$300.00
Starter - Denso Style PLGR (19849) -
  • For John Deere tractor models 9220, 9320, 9320T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) S680, 9860 STS< li>
  • Compatible with John Deere Harvester(s) 7700< li>
  • Replaces John Deere OEM number RE515843, RE522851, SE501862, RE506825< li>
  • Replaces Denso manufacturer number 428000-0120, 428000-0121< li>
  • Replaces manufacturer number 19849, 190-6372, 91-29-5638< li>
  • Denso Style: Planetary Gear Reduction< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 13< li> < UL> (Part No: 156181)
$370.00
Starter Drive - Starter drive, for Bosch Starter AR70436, Bosch number 00011359090. Tractors: 830 Germany with engine SN# 152930 & up, 1530, 2030, 2040, 2240, 2840, 2940. For 1530, 2030, 2040, 2240, 2840, 2940, 830 (Part No: TP-AL25275)$41.69
Starter Drive - Starter drive for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54992)		$30.60
Starter Drive - Starter Drive assy. For Delco-Remy starters in diesel tractors: 3010, 3020, 4010, 4020. Used with Delco starters 1113148, 1113190. Can replace AR11133~ AR84239. 10 teeth.{Remanufactured} For 3010, 3020, 4010, 4020 (Part No: TP-AR88880)		$38.80
Starter Drive - Positork Starter Drive. For Delco-Remy starters in diesel tractors: 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 7020, 8430~Combines: 6600, 7700. Used with Delco starters 1113148, 1113190, 1113391, 1113402 For 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 6600, 7020, 7700, 8430 (Part No: 164393)		$25.80
Starter Drive - STARTER DRIVE For BO. (Part No: 109966)$29.50
Starter Drive - 10 teeth. Replaces AR44700. Used with starters 1113402, 1113672, 1113391. For tractor models 180 with diesel eng., 3020 SN# 123000 and up, 4000 SN# 201000 and up, 4020 SN# 201000 and up, 4030, 4230, 4320, 4430, 4520, 4560, 4620, 6600, 6602, 7020, 7700, 8430. (Part No: 164393)		$25.80
Starter Drive - 12 Volt, 10 Teeth. Used with the following starters: 1107127, 1108914, 1108919, 1108950, 1108989 for Model A, G and 60 tractor. (Part No: 107474)$19.26
Starter Drive - For B, 50. Starter Drive used with Starter 1108155. 9 Teeth. Note: Not a complete starter. (Part No: 110780)$42.50
Starter Drive - For 630. Starter Drive. 11 Teeth. Note: Not a complete starter. (Part No: 110775)$28.76
Starter Drive - Used on John Deere 70, this starter drive is 11 tooth, clockwise rotation with 3 splines. Used on Delco-Remy starter number 1108981 and 1108990, John Deere starter part number AR11159R, AF1578R and AF1392R. Replaces 1924589, 1924816 (Part No: 110779)$27.50
Starter Drive - Starter drive, Fits L, LA, M, MT, 40, 420, 430, 440, 320, 330. Replaces JD # 1868804. Replaces OEM# 1107036, 1107064, 1107127, 1107200, 1108099, 1107165, 1108072. (Part No: 107059)		$22.00
Starter Drive - Delco Style -
  • For John Deere tractor models 520, 530< li>
  • Replaces John Deere manufacturer number 1107725< li>
  • Replaces Delco Remy Starter Drive number 1943808< li>
  • Replaces Delco Remy Starter number 1107725< li>
  • Replaces manufacturer number 6140-218< li>
  • Delco Style< li>
  • Teeth: 9< li>
  • Outer Diameter: 29mm< li>
  • Inner Diameter: 14.3mm< li>
  • Rotation: Clockwise< li>
  • Overall Length: 135mm< li>
  • Clutch Type: Roller< li>
  • Splines: 3 - Spiral< li> < UL> (Part No: 110893)
$45.00
Starter Drive - Delco Style -
  • For John Deere tractor models 720 (Gas), 730 (Gas)< li>
  • Replaces John Deere Starter number AR11012, TY1469, TY6645, TY6709< li>
  • Replaces Delco Remy Starter Drive number 1943818< li>
  • Replaces Delco Remy Starter number 1113093< li>
  • For Delco Direct Drive Starters< li>
  • Teeth: 10< li>
  • Rotation: Clockwise< li>
  • Splines: 3< li>
  • ID: 14.3mm< li>
  • Gear OD: 32mm< li>
  • OAL: 140mm< li> < UL> (Part No: 111351)
$65.00
Starter Drive Housing -
  • For John Deere tractor models 620, 630< li>
  • Replaces John Deere manufacturer number 2107-074000< li> < UL> (Part No: 111359)
$295.00
Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style drive. for models L, LA, M, MT, 40, 420, 430, 440, 320, and 330 using starters 1107036, 1107064, 1107127, 1107200, 1108099, 1107165, 1108072. Replaces 1868804. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Part No: 112575)		$23.76
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: 182608)		$17.00
Starter - Iskra (18488) -
  • For John Deere tractor models 5065M, 5075M, 5083, 5083E, 5083EN, 5085E, 5085M, 5090E, 5093, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5100ML, 5101E, 5101EN, 5105M, 5115M, 5115ML, 5425, 5425N, 5525N, 6105D, 6105E, 6115D, 6120E, 6130D, 6135E, 6140D< li>
  • Replaces John Deere OEM number RE521488, RE543483, RE551446, SE502913< li>
  • Replaces Starter number 18488< li>
  • Replaces manufacturer number MS292< li>
  • Style: Mahle AZE 46< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li>
  • Starter Drive: Planetary Gear Reduction (PLGR)< li> < UL> (Part No: 189494)
$312.00
Starter Knob - Plastic. For tractor models 320, M, MC, MT, 40, 330, 420, 430, 440. (Part No: 179543)		$8.30
Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Part No: 189672)		$42.51
Starter Nose Cone -
  • For John Deere tractor models 1010, 2010 (s n 42001-later)< li>
  • Replaces Delco Remy manufacturer number 1961623, 1951433, 1958730< li>
  • Replaces Delco Remy Starter number 1107280, 1107326, 1107879, 1109581< li> < UL> (Part No: 111741)
$33.76
Starter Nose Cone -
  • For John Deere tractor models 520, 530< li>
  • Replaces John Deere OEM number AR11057R< li>
  • Replaces Delco Remy Starter number 1107725< li> < UL> (Part No: 120886)
$201.00
Starter Nose Cone -
  • For John Deere tractor models 620, 630< li>
  • Replaces John Deere OEM number AR11045R< li>
  • Replaces Delco Remy Starter number 1113092< li> < UL> (Part No: 120887)
$260.00
Starter Nose Cone -
  • For John Deere tractor models 720, 730< li>
  • Replaces John Deere OEM number AR11053R< li>
  • Replaces Delco Remy Starter number 1113093< li> < UL> (Part No: 121694)
$260.00
Starter Nose Cone -
  • For John Deere tractor models 720 (Gas), 730 (Gas)< li>
  • Replaces John Deere OEM number AR11004< li>
  • Replaces Delco Remy Starter number 1113079< li> < UL> (Part No: 121927)
$201.00
Starter Pedal Lever - For tractor models A, B, H. Starter Pedal Lever. (Part No: 115160)		$21.19
Starter, Remanufactured - For tractor models 320 and 330 Gas 1956 through 1960, 40 1953 through 1955. Remanufactured requires additional $100.00 core charge. This additional charge will be added to your order. Replaces Delco Starter 1107127. ``There is an additional shipping cost for this product: $5.00 (Part No: 203427)$342.01
Starter, Re-Manufactured - This is a rebuilt replacement for Delco Starter numbers 1107280, 1107326, 1107879. 12 Volts, 9 Teeth drive. 1010 and 2010 Gas. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 160369)$194.00
Starter Rod Bushing -
  • For John Deere tractor models B (s n 201000-later), 50, 520< li>
  • Replaces John Deere OEM number B2287R< li>
  • Inner Diameter: 0.406"< li>
  • Outer Diameter: 1.000"< li>
  • Thickness: 0.505"< li>
  • Mounts on top of flywheel cover< li> < UL> (Part No: 126702)
$26.26
Starter Safety Switch - This Neutral Safety Starter Switch is used in Yanmar built John Deere Compact tractors: 1050, 1070, 1250, 1450, 1650, 3005, 4005, 650, 670, 750, 770, 790, 850, 870, 900HC, 950, 970, 990. Replaces CH13415 (Part No: 164126)		$21.20
Starter Solenoid - Starter Solenoids. Solenoid assy~ services 1113135 & 1113148 on model 3010D, 3020D, 4010D, 4020D. 24 volt {B}. For 3010, 3020, 4010, 4020 Replaces AR11138, AR28053, AR40134, AR40395, SDR6004, SE501445, TY1470, TY2666, TY6622, TY6703 (Part No: 105697)		$25.26
Starter Solenoid - Solenoid for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: 105696)		$58.07
Starter Solenoid - Delco Starter Solenoid Assembly, flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 820, 1010, 2010, 2510, 3010, 3020, 4010, 4020 TP-AR68304 (Part No: 105675)		$15.50
Starter Solenoid - Used with AR70436 starter. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1640, 1830, 1840, 2020, 2030, 2120, 2130, 2140, 2250, 2450, 2940, 3030, 3040, 3120, 3130, 3140, 820, 830, 840, 920, 930, 940. Replaces AL113664. (Part No: 119940)		$23.26
Starter Solenoid - 2 bolt, Used with Bosch starters. For tractor models 1020, 1120, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 920, (1530 engine SN# up to 152929), 820, 830. (Part No: 115851)		$18.76
Starter Switch - Starter Switch button type For 50, 60, 70, A, B, G, R. (Part No: 105692)		$11.48
Starter Switch, Keyed - This starter switch comes with 2 keys, has seven terminals on the back and is for models: 1020, 1030, 1120, 1130, 1630, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 820, 830, 920, 930. Starter Switch replaces AR55721, AL16046. (Part No: 173332)		$28.40
Starter Switch Lever - For tractor models 320, 40, 330, 420, 430. (Part No: 185147)$24.29
Starter Switch, OEM Style - This keyed ignition and light switch has 4 spade terminals. Comes with 2 keys. Tractors: 1020 to SN# 117499, 1520 to SN# 117499, 2020 to SN# 117499, 2030 to SN# 117499.{D} For 1020, 1520, 2020, 2030 Replaces AT18721, AT21880 (Part No: 187033)		$49.63
Starter Switch with Key - This Starter Switch if for tractor models 1020, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3055, 3150, 3155, 3255. Replaces AR47235, AR47459, AR47458, AR53452 (Part No: 156037)		$17.26
Switch - Combination ignition and light switch, 12 volt. For tractor models 530, 630, 730. Replaces OEM# AR20430. (Part No: 105694)		$22.76
Switch, Dimmer - Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Part No: 179443)		$27.50
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: 121141)		$12.99
Switch Starter - This Two Terminal Switch, with side screw terminal for tractors: 50, 60, 70, 520, 620, 720. Fits starters: 1107188, 1107634, 1113004, 1113005, 1113041, 1113304 Replaces: 1930496, 1930505, D906, 1928209, 1934779, AR11006R, AR11115R (Part No: 121143)		$11.16
Switch, Thermostart - For tractor models 1020, 1030, 1120, 1130, 1630, 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2255, 2350, 2550, 2750, 2950, 3030, 3120, 3130, 820, 830, 920, 930. Replaces AL25064, AL36365. (Part No: 169994)		$24.00
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: 182606)		$14.59
Temperauture Sender -
  • For John Deere tractor models 4120, 4320, 4520, 4720, 5076E, 5076EF, 5076EL, 5076EN, 5080GF, 5080GV, 5082E, 5083E, 5083EN, 5085E, 5090E, 5090EH, 5090EL, 5090EN, 5090G, 5090GF, 5090GH, 5090GV, 5093E, 5093EN, 5100GF, 5100GV, 5101E, 5101EN, 5210, 5215F, 5215V, 5225, 5310, 5310N, 5315F, 5315V, 5320N, 5325N, 5410, 5415, 5415H, 5420N, 5425N, 5510, 5510N, 5515F, 5515V, 5520N, 5525, 5525N, 5715HC, 6105E, 6110E, 6110J, 6125E, 6125J, 6130J, 6140J, 6145J, 6155J, 6165J, 6180J< li>
  • Replaces John Deere OEM number RE500844< li> < UL> (Part No: 168192)
$19.76
Thermostart Plug - For tractor models 850, 900HC, 950, 1050. (Part No: 158005)$45.76
Transmission Pressure Switch -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6715, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7505, 7510, 7520, 7720, 7820, 7920< li>
  • Replaces John Deere OEM number RE212876< li>
  • Mounting Style: A< li>
  • Thread Size: 0.472"< li>
  • Thread Type: Metric< li>
  • Switch Function: SPST_NC< li> < UL> (Part No: 167641)
$57.00
Tune Kit - This Tune Kit is for John Deere 2 cylinder tractors with gas engines. Contains: Autolite spark plugs (AL216), heavy duty points, condenser, and rotor. Using 14mm, 7 16 reach, 13 16 hex spark plug. For Delco distributor thru 1963. Fits tractors 40, 320, 330 For 320, 330, 40, 420, 430, 440 (Part No: 111812)		$17.76
Tune Kit - This Tune Kit is for John Deere tractors 1010 to ser.#42000 and 2010 to ser.#42000 using DELCO distributors with clip held cap thru 1963. Contains: Autolite spark plugs (AL216), heavy duty points, condenser, rotor and gap gauge. Using 14mm, 7 16 reach~ 13 16 hex spark plug. For Delco distributors thru 1963. (Part No: 179398)		$25.00
Tune Kit - This Tune Kit is for John Deere tractors with 2 cylinder gas engines. Contains: Autolite spark plugs (AL 3076), heavy duty points, condenser, rotor, and gap gauge. Using 7 8-18 thread, 5 8 reach, 15 16 hex spark plug. For Delco distributor thru 1963. For tractor models 320, 330, 40, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 111810)		$25.50
Tune Kit - This Tune Kit is for John Deere tractors with 2 cylinder gas engines. Contains: Autolite spark plugs (AL 386), heavy duty points, condenser, and rotor. Using 18m, 1 2 reach, 7 8 hex spark plug. For Delco distributors thru 1963. Fits tractors: 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 111811)		$20.60
Tune Kit - This Tune Kit is for John Deere tractors with 4 cylinder gas engines. Contains: Autolite spark plugs (AL 386), heavy duty points, rotor, condenser and gap gauge. Using 18mm, 1 2 reach, 7 8 hex spark plug. For Delco distributor thru 1963. Fits tractors 3010 to serial For 3010 (Part No: 179399)		$23.00
Tune Up Kit - For Pony Engine With Foreign Coils Contains Points, Condensor, universal Plug Wires and Coil. Consists of: 2 Point Sets, 2 Condensers, 2 Plug Wire Sets, & 2 Foreign Ignition Coils (Part No: 109868)		$206.00
Tune Up Kit - For Pony Engine With American Coils Contains Points, Condensor, Universal Plug Wires and Coil. (Part No: R2532)		$252.40
Tune Up Kit -
  • For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030< li>
  • Compatible with John Deere Combine(s) 55, 95, 105, 3300< li>
  • Compatible with John Deere Baler(s) 323W< li>
  • Replaces John Deere OEM number AT21719< li>
  • Includes: Point Set and Condenser< li> < UL> (Part No: 165182)
$9.00
V Belt - Belt is 1 2 inch wide and 23-1 4 inches long.Used on L(Styled SN# L640000 and up), LA, M, MC, and MT. Replaces L4201T. (Part No: 115938)		$2.50
Voltage Regulator - Internal voltage regulator, for alternators. For tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4620, 4630, 4640, 4650, 4840, 4850, 6030, 7020, 7520, 8430, 8630. OEM alternators: AR54793, AR54796, AR56728, AR84306, AR93445, AR93446. (Part No: 173217)		$7.46
Voltage Regulator - 6 plug. Solid State type will replace the mechanical type. This is smaller than the mechanical type and will require new mounts be made. For tractor models 850, 950, 1050. (Part No: 113988)		$18.26
Voltage Regulator - For tractor models 650, 750. Replaces CH15589. (Part No: 181737)		$99.72
Voltage Regulator - 5 Prong. Replaces VR-150. For tractor models 670, 770, 870, 970, 1070. Replaces John Deere OEM nos AM101406, MIA881279 (Part No: 172403)		$39.00
Voltage Regulator - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1640, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2120. (Part No: 156455)		$28.26
Voltage Regulator - For tractor models (3020 with air), (4000, 4020 with air and SN# 250001-263481), (4320 with air and SN# up to 019504), (4520 with air), (4620 with air and SN# up to 014117), (5020 with air and SN# 030329 and up), (6030 with air), (7020 with air and SN# up to 002263), 350C, 350D, 355D, 450E, 455E, (544, 544A both Duboque SN# 121500 and up or Welland SN# 85200 and up), 550B, 555, 555B, (570, 570A with engine SN# 130706 and up), (644, 644A with engine SN# 280001 and up), (646 SN# up to 223644), 690, 690A, (690B SN# up to 003872), 693B, (740 with cab and SN# up to 003872), 180, 202, 303, 329DH, 329GH, 329HC, 329HF. Replaces AT29926. (Part No: 105709)		$40.40
Voltage Regulator - This voltage regulator is used on some of the following 1020, 1520, 1530, 2020, 2030, 2440, 2630, 2640, 300B Indust Const, 301A Indust Const, 302 Indust Const, 302A Indust Const, 401B Indust Const, 401C Indust Const, 4020, 4455, 450 Riding Mower, 4520. Replaces AMO6064, PL105-139, 1400-0569, 230-16102, 8010-139, VR-1755, 3195003, 3211952, 166-139, 5-139, 5-81, 5-67, R2AM4, 8RH2004D, 8RB2007, 105-139, VSH-6201R, 8-359, M5-146, M09-05, AR77485, AT21815. 12 Volt, B-Circuit, Neg ground. 15.2v set. Plug-Type N; Wiring Code 3 Terminal ID: Red Isolation Diode (+), Black Ground, Green Field, Yellow Ignition. (Part No: 125218)		$34.76
Voltage Regulator - Voltage regulator for John Deere models 3010, 3020 up to serial number 122999, 4010, and 4020 up to serial number 2000999. Replaces Delco 1118896, 1118897, 1119000, 1119135, AR11304, and AR40170. (Part No: 105521)		$71.00
Voltage Regulator - For B, R, both 1947 to 1954, 25 combine, 45 combine, 55 combine, 65 combine. 6 volt positive ground. Regulator for use with generators 1100506, 507, 1101390, 397, 1947580. Saddle Mount. (Part No: 105284)		$20.00
Voltage Regulator - For 72 amp Motorola Alternator on Models: 4320, 4520, 4620, 5020 SN# 030329 and up, 6030, 7020 up to SN# 002263, 6600 Combines, 6620 Combines, 7700 Combines, 7720 Combines, 8820 Combines, 9900 Cotton Picker, 9910 Cotton Picker, 9920 Cotton Picker, 9940 Cotton Picker. This is an original Motorola external type #38RG2010C. (Part No: 105709)		$40.40
Voltage Regulator - Voltage Regulator, (6 Volt). Fits 720, 730, 820, 830 tractors (Part No: 150666)$33.01
Voltage Regulator, 12 Volt - For 435 and 440 12V Diesels, 1010, 2010. Replaces regulator 1118779. 4-terminal, flat Mount. The Three Post side of this regulator may be parallel or slightly splayed. Replaces AT11855 (Part No: 105581)		$20.00
Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications. Replaces AR38459, AR78298 (Part No: 105708)		$29.90
Voltage Regulator, 24 Volt - Used on 24-Volt systems using Delco generator # 1103021 and 1103026. 3010, 4010, (3020 Diesel up to Serial Number 122999), (4020 Diesel up to Serial Number 200999), (500 Diesel up to Serial Number 67999), 5010, (600 Diesel up to Serial Number 90999), (720 Electric start diesel Serial Number 7222600 and up), (730 Electric start diesel), (830 2 cylinder Electric start), (840 Electric start up to Serial Number 8400199) Replaces: 1118292, 1118347, 1118957, 1119282, AR11008, AR30155 Flat Mount. For 24-Volt generator system, 4 terminals, 8 - 12 AMPS, works on negative or positive polarity (Part No: 105546)		$91.94
Voltage Regulator, 6 Volt - 6 volt. For tractor models A, 55, 60, 70, 95 tractors. (Part No: 105284)$20.00
Voltage Regulator, 6 Volt, Positive Ground - For M, 40, 70, 320, 330, 420, 430, 440, all using 6V generators 1101852, 857, 859. Replaces regulators VR1814, 1118291, 308, 780. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Part No: 105516)		$19.00
Voltage Regulator Conversion Kit - Used with VR1813 and VR1814 regulators when replacing Delco Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. A, AO, AR, B, BO, BR, G, H, L, LA, M, MC, MI, MT (Part No: 184930)		$57.00
Voltage Regulator Conversion Kit, External, 6-Volt - For H 1941-47. External Voltage Regulator Conversion Kit includes VR1814 External Voltage Regulator and VRK1815 Conversion Kit. For generators 1101356, 371, 377, 385. 6V replaces Delco cutouts. Flat Mount (Part No: VR1814_VRK1815)		$61.12
Voltage Regulator, External, 12 Volt - This 12 Volt Saddle Mount Voltage Regulator has 4 Terminals. For models A, D, G, 50, 60, 55 Combines, 65 Combines, 95 Combines. Use with generators 1100955, 956, 1101777, 784, 1947579. Replaces regulators 1118266, 306, 791, VR1816. Saddle Mount. (Part No: 105588)		$27.76
Voltage Regulator, External, 12 Volt - This 12 Volt Saddle Mount Voltage Regulator has 3 Terminals. For 12V A, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, all using generator 1100309. Replaces regulator 1118792. Saddle Mount (Part No: 105293)		$32.76
Voltage Resistor -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Construction & industrial models 350, 350B, 380, 450, 480, 480A< li>
  • Replaces John Deere OEM number AA5791R, AA6043R< li> < UL> (Part No: 168687)
$11.16
Water Temperature Sensor Switch -
  • For John Deere tractor models 4560, 4755, 4760, 4955, 4960, 7200, 7400, 7600, 7700, 7710, 7800, 7810, 8100, 8110, 8200, 8210, 8300, 8400, 8410< li>
  • Replaces John Deere OEM number RE151433< li> < UL> (Part No: 184070)
$24.00
Wheel Speed Sensor -
  • For John Deere tractor models SE6920, 1654, 1854, 6105M, 6115M, 6125M, 6140R, 6145J, 6150M, 6150R, 6155M, 6165J, 6170M, 6170R, 6190R, 6210R, 6230, 6330, 6430, 6800, 6810, 6820, 6830, 6930, 7130, 7185J, 7195J, 7200, 7205J, 7210, 7210J, 7225J, 7230, 7330, 7400, 7410, 7430, 7510, 7530, 7600, 7610, 7630, 7700, 7710, 7715, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930, 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE295936< li> < UL> (Part No: 169715)
$28.00
Wire Harness -
  • For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4240S, 4320, 4350, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6020, 7020, 7520 (4WD), 8430 (4WD), 8440, 8630, 8640< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5820< li> < UL> (Part No: 159006)
$5.76
Wiring Harness - For model A up to SN# 584000 with 6 volt generator systems with generator cutout only. Fits magnetto or distributor models. (Part No: 126793)$260.00
Wiring Harness - For model 50 gas with S N 5016058 to 5021479. (Part No: 179847)		$239.00
Wiring Harness - For Model 50 gas with S N after 5021479. (Part No: 179101)		$239.00
Wiring Harness - Fits John Deere 50 (gas, up to serial number 5016057). Replaces: AB4727R. (Part No: 178587)		$239.00
Wiring Harness -
  • For John Deere tractor model 60 (Rowcrop, s n 6030000-later)< li>
  • For 12 volt generator systems only< li>
  • Includes headlight wires and wiring instructions - exactly like original< li>
  • All terminals soldered and sealed< li> < UL> (Part No: 126790)
$218.10
Wiring Harness -
  • For John Deere tractor model 70 (Rowcrop)< li>
  • Replaces John Deere OEM number AF1734R, AF1698R< li>
  • For 12 volt generator systems only< li>
  • Includes headlight wires and wiring instructions - exactly like original< li>
  • All terminals soldered and sealed< li> < UL> (Part No: 126791)
$228.00
Wiring Harness -
  • For John Deere tractor model A (s n 584000-later with magneto or distributor)< li>
  • For 12 volt generator systems only - with voltage regulator< li>
  • Cotton braided - like original< li>
  • Includes headlight wires and wiring instructions< li>
  • Terminals are soldered and sealed< li> < UL> (Part No: 126794)
$204.00
Wiring Harness -
  • For John Deere tractor model B (s n 201000-later with magneto or distributor with voltage regulator)< li>
  • For 6 volt generator systems only with voltage regulator< li>
  • Cotton braided - exactly like original< li>
  • Includes headlight wires and wiring instructions< li>
  • All terminals are soldered and sealed< li> < UL> (Part No: 126796)
$204.00
Wiring Harness -
  • For John Deere tractor model G (s n 26000-later with magneto or distributor with voltage regulator)< li>
  • For 12 volt generator systems only with voltage regulator< li>
  • Cotton braided - like original< li>
  • Includes headlight wires and wiring instructions< li>
  • All terminals are soldered and sealed< li> < UL> (Part No: 126797)
$204.00
Wiring Harness -
  • For John Deere tractor model H (with magneto or distributor with cut-out relay)< li>
  • For 6 volt generator systems only with cut-out relay< li>
  • Cotton braided - exactly like original< li>
  • Includes headlight wires and wiring instructions< li>
  • All terminals are soldered and sealed< li> < UL> (Part No: 126798)
$159.99
Wiring Harness -
  • For John Deere tractor models M, MC, MT (all with cut-out relay)< li>
  • For 6 volt generator systems only with cut-out relays< li>
  • Cotton braided - exactly like original< li>
  • Includes headlight wires and wiring instructions< li>
  • All terminals are soldered and sealed< li> < UL> (Part No: 126799)
$280.00
Wiring Harness -
  • For John Deere tractor models 320, 330, 420, 430< li>
  • For models 320 & 330 it will have one extra wire on the harness for electric oil pressure gauge that will not be used< li>
  • For 6 volt generator systems only< li>
  • Cotton braided - exactly like original< li>
  • Includes headlight wires and wiring instructions< li>
  • All terminals soldered and sealed< li> < UL> (Part No: 126800)
$300.00
Wiring Harness - 6V Systems -
  • For John Deere tractor model B (s n 201000-earlier with magneto or distributor with cut-out relay)< li>
  • For 6 volt generator systems only with cut-out relays< li>
  • Cotton braided - exactly like original< li>
  • Includes headlight wires and wiring instructions< li>
  • All terminals are soldered and sealed< li> < UL> (Part No: 126795)
$196.00
Wiring Harness Kit, 12V Generator Systems Only -
  • For John Deere tractor models 520, 620, 720 (all Rowcrop)< li>
  • Replaces John Deere OEM number AF3327R, AA6826R, AA7350R, AB5298R, AB5560R< li>
  • For 12 volt generator systems only & cowl mounted lights< li>
  • Includes headlight wires and wiring instructions - like original< li>
  • All terminals are soldered and sealed< li> < UL> (Part No: 126792)
$290.00
Wiring Harness Kit, Complete - Original style. For model 4020 Diesel Powershift from SN# 222919 to 250000. (Part No: 180090)$1936.63
 
Engine Bearings
Axle Felt Retainer - Rear -
  • For John Deere tractor models A (s n 547322-later), AW (s n 547322-later), 50 (88" tread only), 520 (88" tread only), 530 (88" tread only)< li>
  • Replaces John Deere OEM number A3041R< li>
  • Bare Steel< li>
  • Inside Diameter: 3.033"< li>
  • Outside Diameter: 4.727"< li> < UL> (Part No: 165218)
$44.26
Axle Felt Seal - Rear -
  • For John Deere tractor models A (s n 547322-later), AW (s n 547322-later), 50 (88" tread only), 520 (88" tread only), 530 (88" tread only)< li>
  • Replaces John Deere OEM number A3043R, AA3657R< li>
  • Inside Diameter: 3.375"< li>
  • Outside Diameter: 4.656"< li>
  • Width: 0.438"< li> < UL> (Part No: 165219)
$29.26
Axle Oil Cup -
  • For John Deere tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 7700, 8430, 8440, 8450, 8630, 8640, 8650 (Fits Combines 4400)< li>
  • Compatible with John Deere Combine(s) 4400, 4420, 6600, 6602, 6620, 6622, 7701, 7720, 7721, 8820, 9501< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5720, 5730, 5820, 5830< li>
  • Replaces John Deere OEM number R59074< li> < UL> (Part No: 109604)
$32.50
Axle Seal -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5460, 5720, 5730, 5820, 5830< li>
  • Replaces John Deere OEM number RE31702< li> < UL> (Part No: 109603)
$80.00
Axle Shaft Seal -
  • For John Deere tractor models 820, 830, 920, 930 (all 3 cylinder), 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s n 430000-later), 1641, 1641F, 1830, 2020, 2030, 2040 (s n 430000-later), 2040S (s n 430000-later), 2120, 2130, 2140 (s n 430000-later), 2150, 2155 (s n 765146-earlier), 2240 (s n 350000-later), 2255, 2350, 2440, 2550, 2630, 2640, 2750, 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5310, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5520, 5605, 5615, 5705, 5715< li>
  • Compatible with John Deere Combine(s) 6620, 7720 (all with RWA), 8820 (with RWA)< li>
  • Compatible with John Deere Construction & industrial models 210, 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315, 315C, 315CH, 315D, 400, 401, 401B, 401C, 401D, 410< li>
  • Replaces John Deere OEM number AT20703< li>
  • 4.525" OD< li>
  • 3.0" Shaft Diameter< li>
  • .375" Wide< li> < UL> (Part No: 152269)
$20.26
Axle Shaft Seal -
  • For John Deere tractor model 1010< li>
  • Compatible with John Deere Harvester(s) 34, 35, 3760, 3800, 3940, 3950, 3955, 3960, 3970, 3975, 5200, 5400, 5420, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9900, 9910< li>
  • Compatible with John Deere Construction & industrial model 340D, 440C, 440D, 540B, 540D, 640D, 660D, 848G< li>
  • Compatible with John Deere Baler(s) 327, 328, 330, 332, 336, 336AT, 336AWS, 336T, 336WS, 337, 338, 342, 342AWS, 346, 347, 348, 349, 359, 456, 456T, 456WS, 466, 467, 468< li>
  • Replaces John Deere OEM number AT13161< li>
  • Outside Diameter: 2.378"< li>
  • Width: .312"< li>
  • Inside Diameter: 1.750"< li> < UL> (Part No: 176153)
$6.30
Bearing - For tractor models 7000, 7100. (Part No: 107851)$6.00
Bearing - BEARING For 7000, 7100 (Part No: 107852)$8.06
Bearing -
  • For John Deere tractor models 2510, 2630, 2640< li>
  • Compatible with John Deere Combine(s) 6602 (Hillside)< li>
  • Compatible with John Deere Header(s) 78, 88, 120, 183, 200, 213, 215, 216, 218, 220, 222, 224, 230, 278, 288, 483< li>
  • Compatible with John Deere Hay Cutting(s) 1207, 1209, 1214< li>
  • Replaces John Deere OEM number JD8275< li> < UL> (Part No: 116999)
$15.00
Bearing -
  • For John Deere tractor models 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6415, 6420, 6500, 6510, 6520, 6605, 6615, 6715, 7200, 7210, 7220, 7400, 7405, 7410, 7505, 7510, 7515, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number JD10269< li>
  • Transmission Oil Pump Bearing< li> < UL> (Part No: 122192)
$63.00
Bearing -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number JD10268< li>
  • Bearing for Clutch Assembly (Power Shift Transmission)< li> < UL> (Part No: 122609)
$67.00
Bearing -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R (s n 000101-014999), 9400, 9400T, 9410R (s n 000101-014999), 9420, 9420T, 9430, 9460R (s n 000101-014999), 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number RE49868< li> < UL> (Part No: 150315)
$41.00
Bearing -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7220, 7320, 7420, 7515, 7520< li>
  • Replaces John Deere OEM number AL76638< li> < UL> (Part No: 167113)
$41.76
Bearing Cone -
  • For John Deere tractor models 2510, 2520, 3010, 3020 (s n 122999-earlier), 3020 (s n 123000-later), 4010, 4030< li>
  • Compatible with John Deere Combine(s) 55, 95, 105< li>
  • Compatible with John Deere Harvester(s) 99< li>
  • Replaces John Deere OEM number JD8190< li>
  • Bore: 1.000"< li>
  • Radius: .03"< li>
  • Width: .812"< li> < UL> (Part No: 125316)
$24.50
Bearing Cone -
  • For John Deere tractor models 2630, 2640, 4000 (s n: 201999-earlier), 4020, 4230< li>
  • Replaces John Deere OEM number JD8978< li>
  • Bore: 1.000"< li>
  • Radius: .05"< li>
  • Width: 1.001"< li> < UL> (Part No: 126931)
$58.00
Bearing Cup - Inner bearing cup. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. 4.125 inches OD, .13 inch Radius, and .968 inch width. (Part No: 116951)$58.00
Bearing Cup - For tractor models 4040, 4240, 4440. (Part No: 128225)$48.00
Bearing Cup - BEARING CUP For 4040, 4240, 4440. n a 14MAR07 JEFF (Part No: 121734)$18.00
Bearing Hanger - Idler sprocket with bracket assembly~ 19 teeth, 9 16 hex bore. Bracket has two(2) 3 8 holes 2-1 4 on center. For seed drive on planter series: 7000 & 7100. Replaces AA21286. For 7000, 7100 (Part No: 155621)$20.76
Bearing Kit With Cups - Bearing KIT with CUPS For 1630, 1635, 1640, TW, TWA. (Part No: 185476)		$135.00
Bearing With Sleeve - Bearing with sleeve assembly, sleeve (TP-A25915) is pressed onto bearing used on gauge wheel for planters 7000 and 7100. (Not for dual gauge wheel attachment). For 7000, 7100 (Part No: 183779)$35.00
Bushing -
  • For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2130, 2240 (s n 3409999-earlier), 2440 (s n 3409999-earlier), 2630, 2640 (s n 3409999-earlier), 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number R39265< li> < UL> (Part No: 117950)
$63.00
Bushing -
  • For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, 2240, 2440, 2630, 2640, 2840, 3030, 3120, 3130< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 401< li>
  • Replaces John Deere OEM number R39252< li> < UL> (Part No: 165633)
$0.10
Bushing with O-Ring -
  • For John Deere tractor models 2630, 2640< li>
  • Replaces John Deere OEM number R54220< li> < UL> (Part No: 164335)
$25.00
Bushing with O-Ring -
  • For John Deere tractor models 1520 (s n 178601-179600), 1530 (s n 178601-179600), 2020, 2030, 2120, 2440< li>
  • Compatible with John Deere Construction & industrial models 400, 401, 401B, 401C, 401D (s n 715640-earlier)< li>
  • Replaces John Deere OEM number T22094< li> < UL> (Part No: 164337)
$18.50
Cam Bearing Set - Camshaft bearing kit, 3 bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1 4 standard bore, 3 ring piston. Individual bearings not available. For 3010, 3020 (Part No: 182639)$30.26
Cam Bearing Set - For tractor models 4000, 4010, 4020, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: CBK-D446)		$38.88
Cam Bearing Set - For tractor models M, 40, 320, 330, 420, 430, 440. (Part No: 106859)$59.00
Cam Bearing Set - For tractor models 1010 with 115 gas or 145 Diesel, (2010, 40 or 45 with 145 gas or 165 diesel). (Part No: 106860)$74.00
Cam Bearing Set - For 3010, 3020. Cam Bearing Set for 1 engine. Replaces 3-R46930. (t) (Part No: CBKD434)$34.86
Camshaft Bearing -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (LP s n 201000-earlier), 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8760 (s n 500000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600, 644, 644A, 644B, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 700, 700A, 740, 740A, 743, 743A, 762, 762A, 762B, 790, 790D, 792, 850, 850B, 855, 860B, 862, 890, 890A< li>
  • Compatible with John Deere Engine(s) 201, 227, 254 (diesel), 270 (diesel), 362< li>
  • Replaces John Deere OEM number R46903< li>
  • Camshaft use Item #: 108146< li> < UL> (Part No: 106861)
$5.36
Clutch Control Valve Gasket -
  • For John Deere tractor models 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1950, 1950N, 2040 (s n 350000-later), 2140, 2141, 2150, 2155, 2240 (s n 350000-later), 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440 (s n 341000-later), 2450, 2550, 2555, 2640 (s n 341000-later), 2650, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (s n 767516-earlier), 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3640, 3641, 3650, 3651< li>
  • Compatible with John Deere Construction & industrial models 301A (s n 389637-later), 302 (s n 389637-later), 401B (s n 700790-later), 401D< li>
  • Replaces John Deere OEM number L34345< li>
  • All John Deere Construction & Industrial; With Independent PTO< li> < UL> (Part No: 161856)
$4.20
Clutch Release Bearing Carrier -
  • For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number R51469< li> < UL> (Part No: 170437)
$91.80
Clutch Release Bearing - Greaseable -
  • For John Deere tractor models 820, 830, 840, 920, 930, 940, 1030, 1040, 1130, 1530, 1630, 1830, 1840, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2840, 3030, 3130< li>
  • Replaces John Deere OEM number AL30777< li>
  • ID: 1.960"< li>
  • ID Range: 1.750" - 1.999"< li>
  • Greaseable< li>
  • For Non-Greaseable Throwout Bearing use Item #: 121895< li> < UL> (Part No: 166082)
$132.00
Clutch Release Bearing - Greaseable -
  • For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1630, 1830, 2040 (s n 350000-earlier), 2120, 2130, 2240 (s n 350000-earlier), 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AL27231< li>
  • I.D.: 1.960"< li>
  • I.D. Range: 1.750" - 1.999"< li>
  • For Release Bearing use Item #: 100013< li> < UL> (Part No: 177005)
$72.70
Clutch Release Throw Out Bearing -
  • For John Deere tractor models 1450, 1650, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5520, 5605, 5615, 5715< li>
  • Replaces John Deere OEM number RE173315, CH18562< li>
  • Replaces Case OEM number H836009< li>
  • I.D.: 1.769"< li>
  • O.D.: 2.950"< li>
  • Thickness: .629"< li> < UL> (Part No: 107478)
$11.99
Clutch Release Throw Out Bearing Carrier -
  • For John Deere tractor models 820 (3 cylinder), 830 (3 cylinder), 840 (With mid-PTO), 920, 930, 940, 1020 (European), 1030, 1040, 1120 (s n 315197-later), 1130, 1140 (With mid-PTO), 1350 (With mid-PTO), 1530, 1630, 1640, 1750, 1830, 1840, 1850, 2020 (European), 2030 (European), 2040 (s n 349999-earlier), 2120, 2130, 2150, 2155, 2240 (s n 349999-earlier), 2255 (s n 494049-earlier), 2350 (s n 490745-earlier), 2355, 2840, 3030, 3120, 3130< li>
  • For Clutch Release Throw Out Bearing use Item #: 162418< li> < UL> (Part No: 164839)
$33.00
Cone Tapered Roller Bearing -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 7720, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9560, 9560 SH, 9560 STS, 9600, 9610, 9640, 9650, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9680, 9750 STS, 9760 STS, 9860 STS, 9880 STS< li>
  • Replaces OEM number JD9075< li> < UL> (Part No: 118422)
$36.00
Connecting Rod Bearing - .010" Oversize - Journal -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Replaces John Deere OEM number AR57208< li>
  • Sold per journal< li>
  • Bearing Size: .010" Oversize< li>
  • For Standard connecting rod bearing use Item #: 106774< li> < UL> (Part No: 106772)
$23.26
Connecting Rod Bearing - .010" Oversize - Journal -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5460, 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860B, 862, 862B, 890, 890A, 990, 992D LC, 992ELC< li>
  • Compatible with John Deere Engine(s) 6101, 6101A, 6101AF010, 6101H, 6101HF010, 6466A, 6619A, 6619AF, 6619T, 6619TF-01< li>
  • Replaces John Deere OEM number AR104130< li>
  • Sold per journal< li>
  • Bearing Size: .010" Oversize< li>
  • For Standard connecting rod bearing use Item #: 158398< li> < UL> (Part No: 106776)
$23.76
Connecting Rod Bearing - .010" Oversize - Journal -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number RE65909< li>
  • Bore: 4.19"< li>
  • Pin: 1.375" & 1.62"< li>
  • Engine: 4045 PowerTech 4.5L & 6.8L< li>
  • Sold per journal< li>
  • For .020" Oversize connecting rod bearing use Item #: 123929< li> < UL> (Part No: 123930)
$16.50
Connecting Rod Bearing - .020" Oversize - Journal -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Replaces John Deere OEM number AR57209< li>
  • Sold per journal < li>
  • Bearing Size: .020" Oversize< li>
  • For Standard connecting rod bearing use Item #: 106774< li> < UL> (Part No: 106773)
$25.00
Connecting Rod Bearing - .020" Oversize - Journal -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5460, 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860B, 862, 862B, 890, 890A, 990, 992D LC, 992ELC< li>
  • Compatible with John Deere Engine(s) 6101, 6101A, 6101AF010, 6101H, 6101HF010, 6466A, 6619A, 6619AF, 6619T, 6619TF-01< li>
  • Replaces John Deere OEM number AR104123< li>
  • Sold per journal < li>
  • Bearing Size: .020" Oversize< li>
  • For Standard connecting rod bearing use Item #: 158398< li> < UL> (Part No: 106777)
$30.76
Connecting Rod Bearing - .030 - Used on John Deere 6076T, 466 CID 6 cylinder diesel Engine, this bearing replaces John Deere number AR73281. This bearing is .030 oversize. (Part No: 106770)		$14.60
Connecting Rod Bearing - .030" Oversize - Journal -
  • For John Deere tractor models 40, 320 (s n 370855-later), 330, 420, 430, 440 (all gas)< li>
  • Compatible with John Deere Engine(s) 100, 113< li>
  • Replaces John Deere OEM number AM3166T< li>
  • Bearing size: .030" oversize< li>
  • Sold per journal < li> < UL> (Part No: 100015)
$21.50
Connecting Rod Bearing - .030" Oversize - Journal -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Replaces John Deere OEM number AR57210< li>
  • Sold per journal < li>
  • Bearing Size: .030" Oversize< li>
  • For Standard connecting rod bearing use Item #: 106773< li> < UL> (Part No: 106774)
$25.00
Connecting Rod Bearing - Standard - This standard connecting rod bearing is used on Yanmar Engines: 3TNE84, 3TNV84, 3TNV84T, 3TNV88, 4TNE84, 4TNV84, 4TNV84T, 4TNV88, 3015D, 4020D, 4020T, 3TNE84D, 4TNE84D, 4TNE84T, 3TNE88, 4TNE88, 3TNV84 T, 3TNV84T, 4TNV84, 4TNV84T, 3TNV88, 4TNV88. Replaces 129150-23600, 129150-23601, 729150-23600, AM875395 (Part No: 124083)		$15.26
Connecting Rod Bearing - Standard - Journal -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Replaces John Deere OEM number AR53020< li>
  • Sold per journal < li>
  • Bearing Size: Standard< li>
  • For .010" connecting rod bearing use Item #: 106774< li> < UL> (Part No: 106771)
$23.26
Connecting Rod Bearing - Standard - Journal -
  • For John Deere tractor models 8630 (s n 044815-later), 8640 (s n 044815-later), 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5460 (s n 045526-later), 5820 (s n 045526-later), 5830 (s n 045526-later), 6710< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850 (s n 046053-later), 855, 860B (s n 046053-later), 862 (s n 046053-later), 862B (s n 046053-later), 890 (s n 046053-later), 890A (s n 046053-later), 990, 992D LC (s n 046053-later), 992ELC< li>
  • Compatible with John Deere Engine(s) 6101, 6101A, 6101AF010, 6101H, 6101HF010, 6466A, 6619A, 6619AF, 6619T, 6619TF-01< li>
  • Replaces John Deere OEM number AR101271< li>
  • Sold per journal < li>
  • Bearing Size: Standard< li>
  • For .010" connecting rod bearing use Item #: 158398< li> < UL> (Part No: 106775)
$65.00
Connecting Rod Bearing - Standard - Journal -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6615, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number RE65908< li>
  • Bore: 4.19"< li>
  • Pin: 1.375" & 1.62"< li>
  • Engine: 4045 PowerTech 4.5L & 6.8L< li>
  • Sold per journal< li>
  • For .010" Oversize connecting rod bearing use Item #: 156339< li> < UL> (Part No: 123929)
$12.00
Cylindrical Roller Bearing -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1850, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651< li>
  • Compatible with John Deere Construction & industrial models 490, 790, 792< li>
  • Replaces John Deere OEM number L65031, JD10105< li>
  • Inside Diameter: 1.260"< li>
  • Outer Ring Width: .669"< li>
  • Outside Diameter: 1.772"< li> < UL> (Part No: 167707)
$24.67
Engine Rod Bearing (STD) - Rod Bearing in standard. For B, BN, BW, all from SN# 96000, 50. Standard size journal measures 2.7485". 2 required per engine price is for each. Replaces YTO CB-469P-STD, AB4941R, NAB491R, B3202R, B3470R, and AB4627R, (Part No: 106735)$22.25
Front Valve Housing Gasket -
  • For John Deere tractor models SE6010, SE6110, SE6210, SE6310, SE6410, SE6510, SE6610, 6010, 6100, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6600, 6605, 6610, 6800, 6810, 6900, 6910, 6910S, 7200, 7210, 7400, 7405, 7410, 7500, 7505, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces OEM number R127580< li> < UL> (Part No: 122416)
$8.63
Gasket - PTO Housing -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320 (s n 398655-earlier), SE6400, SE6410, SE6420 (s n 398655-earlier), SE6510, SE6520 (s n 398655-earlier), SE6610, SE6620 (s n 398655-earlier), 6010, 6020 (s n 398655-earlier), 6100, 6110, 6110L, 6120 (s n 398655-earlier), 6120L (s n 398655-earlier), 6200, 6200L, 6205, 6210, 6210L, 6215, 6220 (s n 398655-earlier), 6220L (s n 398655-earlier), 6300, 6300L, 6310, 6310L, 6310S, 6320 (s n 398655-earlier), 6320L (s n 398655-earlier), 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420 (s n 398655-earlier), 6420L (s n 398655-earlier), 6420S (s n 398655-earlier), 6500, 6500L, 6505, 6506, 6510, 6510L, 6510S, 6515, 6520 (s n 398655-earlier), 6520L (s n 398655-earlier), 6600, 6605, 6610, 6620 (s n 398655-earlier), 6715, 7220, 7320, 7420, 7520 (2003 thru 2007)< li>
  • Replaces John Deere OEM number L76669< li> < UL> (Part No: 167967)
$17.00
Gasket - Transmission Clutch Oil Pump -
  • For John Deere tractor models 4630, 4640, 4840< li>
  • Compatible with John Deere Construction & industrial models 740, 760A, 770, 770A, 770B, 772A, 772B< li>
  • Replaces John Deere OEM number R97770, R94323< li> < UL> (Part No: 115231)
$8.70
Gasket - Transmission Front Cover -
  • For John Deere tractor models SE6010, SE6110, SE6210, SE6310, SE6410, SE6510, SE6610, 6010, 6100, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6510, 6510L, 6510S, 6600, 6605, 6610, 6800, 6810, 6900, 6910, 6910S, 7200, 7210, 7400, 7405, 7410, 7500, 7505, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces OEM number R121682< li> < UL> (Part No: 122202)
$15.02
Kit Bearing Seals - KIT Bearing SEALS For 1630, 1635, 1640, TW, TWA implement parts feb 07 jeff (Part No: 158624)$80.00
Main Bearing - For tractor models (5720, 5730 with 6.466T, 6.466A 6 cyl eng.), (600 SN# 335845 and below 6.404D 6 cyl eng.), (644, 644A SN# 335845 and below 6.404T A 6 cyl eng.), (644C with 6.466T SN# 253373 and up & 6.466A 233593 and up 6 cyl eng.), (644D with 6.466D 6 cyl eng.), (644E, 644ER with 6.076H, 6.076T, 6.076A 6 cyl eng.), (646, 646B SN# 335845 and below 6.404T A 6 cyl eng.), (646A with 6.466D 6 cyl eng.), (6600 with 6.404D 6 cyl eng.), (6602 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (6620 with 6.466T & with 6.466A SN# 317859 and up & with 6.466D SN# 335846 and up 6 cyl eng.), (6622 with 6.466T SN# 253372 and below & with 6.466A SN# 233592 and below & 317859 and up 6 cyl eng.) (Part No: 155963)$20.30
Main Bearing - For tractor models (690, 690A SN# 335845 and below 6.404T A 6 cyl eng.), (690B SN# 335845 and up 6.404T A 6 cyl eng.), (690C with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (693C, 740 SN# 335845 and up 6.404T A 6 cyl eng.), (740A 6.466D 6 cyl eng.), (740E, 740G, 748E, 748G with 6.076A, 6.076H, 6.076T 6 cyl eng.), (762A with 6.466D & with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (762B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (7700 with 6.404D SN# 215000-335845 & 6.404T A SN# 335845 and up & 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (770A with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (770B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up & 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (770BH 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.) (Part No: 155963)$20.30
Main Bearing - For tractor models (7720 6.466T & with 6.466A SN# 233592 and below & 317859 and up 6 cyl eng.), (772B, 772BH, 7800 with 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (790D with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (792D, 792LC, 8100, 8300 SN# 500000 and up 6.076T, 6.076A, 6.076H 6 cyl eng.), (8430, 8440, 8450, 850B, 8820, 892D, 9940, 9950 with 6.466T SN# 253372 and below & 6.466A SN# 317858 and below 6 cyl eng.), (892E, 892LC, 9500, 9600, 9960, 9965 SN# 500000 and up with 6.076A, 6.076H, 6.076T 6 cyl eng.), (JD740A SN# 233593-317858 with 6.466A 6 cyl eng.) (Part No: 155963)$20.30
Main Bearing -
  • For John Deere tractor models 700, 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 644B, 646, 646B, 760, 770, 770A, 770AH, 772A, 772AH< li>
  • Replaces John Deere OEM number AR101266< li>
  • Standard< li> < UL> (Part No: 167143)
$27.50
Main Bearing - .010 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27353, AT21110 (Part No: 123853)		$14.00
Main Bearing - .010 -
  • For John Deere tractor models 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Engine(s) 6101AF010, 6101HF010, 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number AR104122< li> < UL> (Part No: 158391)
$32.76
Main Bearing, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T A 6 cyl eng.), (4430 SN# 335845 and up 6.404T A 6 cyl eng.), (4440 with 6.466T & SN# less than 233592 & 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above & 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T A 6 cyl eng.) (Part No: 155963)$20.30
Main Bearing, .010 - For tractor models (4630 SN# 335845 and up with 6.404T A 6 cyl eng.), (4640 with 6.466T & with 6.466A with SN# 233592 and below & 317859 and up 6 cyl eng.), (4650 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6 cyl eng.), (4755 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4760 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4840 with 6.466T SN# 253372 an below & 6.466A SN# 317858 and below 6 cyl eng.), ((4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955, 4960 SN# 499999 and below with 6.076T, 6.076A, 6.076H 6 cyl eng.), (500A, 500B, 500C, 510 SN# 280000 and up with 4.270 4 cyl eng.), (5440 with 6.404T A 6 cyl eng.), (5460 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.) (Part No: 155963)$20.30
Main Bearing, .010 - Single bearing. For tractor models 770, 870, 955, 970, 1070. (Part No: 124118)$18.76
Main Bearing - .020 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27360, AT21112 (Part No: 123854)		$14.00
Main Bearing - .020 -
  • For John Deere tractor models 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Engine(s) 6101AF010, 6101HF010, 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number AR104123< li> < UL> (Part No: 158392)
$32.76
Main Bearing - .020" -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Combine(s) CTS, 985, 1085, 1177, 1177H4, 1188, 1188H4, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 540E, 540G, 548E, 548G, 600, 640E, 640G, 644A, 644C, 644D, 644E, 644ER, 644G, 646, 646B, 646C, 648E, 648G, 653E, 690, 690A, 690B, 690C, 690CR, 693B, 693C, 740, 740A, 740E, 740G, 743, 743A, 748E, 748G, 750C, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 792DLC, 850B, 850C, 892, 892E, 892ELC< li>
  • Replaces John Deere OEM number AR74817< li> < UL> (Part No: 166400)
$11.16
Main Bearing - .020" Oversize - Set -
  • For John Deere tractor models B, BO, BR< li>
  • Compatible with John Deere Engine(s) 175 (gas), 190 (gas)< li>
  • Bearing Size: .020" Oversize< li>
  • Sold in complete sets< li> < UL> (Part No: 159184)
$500.00
Main Bearing - .020", Single -
  • For John Deere tractor models 3010 (Grove & Orchard, Row-Crop Standard & Utility Tractors), 3020 (s n 122999-earlier, Utility Tractor), 3020 (s n 123000-later, North American Edition), 4010, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500C< li>
  • Replaces John Deere OEM number AR49246< li> < UL> (Part No: 167056)
$15.00
Main Bearing - .030 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27368, AT21114 (Part No: 123857)		$57.00
Main Bearing - .030 -
  • For John Deere tractor models 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Engine(s) 6101AF010, 6101HF010, 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number AR104124< li> < UL> (Part No: 158393)
$54.00
Main Bearing, .030 - Single bearing. For tractor models 770, 870, 955, 970, 1070. (Part No: MB-9150C)$45.36
Main Bearing, 2nd Main, .010 - Single bearing. For model 750. (Part No: AM876258)$48.06
Main Bearing, 2nd Main, .010 - Single bearing. For model : 850. (Part No: 186108)$44.96
Main Bearing, 2nd Main, .010 - Single bearing. For tractor models 950, 1050. (Part No: AM875936)$51.29
Main Bearing, 2nd Main, .030 - Single bearing. For model 750. (Part No: MB-255C)$48.06
Main Bearing, 2nd Main, .030 - Single bearing. For model 850. (Part No: MB-315C)$48.06
Main Bearing, 2nd Main, .030 - Single bearing. For tractor models 950, 1050. (Part No: MB-225C)$48.06
Main Bearing, 2nd Main, Std - Single bearing. For model 750. (Part No: AM876257)$41.66
Main Bearing, 2nd Main, Std - Single bearing. For tractor models 950, 1050. (Part No: AM875929)$38.68
Main Bearing, 3rd Main, Flanged, .010 - Single bearing. For model 750. (Part No: AM876249)$45.07
Main Bearing, 3rd Main, Flanged, .010 - Single bearing, For model 850. (Part No: 186093)$34.73
Main Bearing, 3rd Main, Flanged, .010 - Single bearing. For tractor models 950, 1050. (Part No: AM875935)$51.29
Main Bearing, 3rd Main, Flanged, .030 - Single bearing. For model 750. (Part No: MB-355C)$48.06
Main Bearing, 3rd Main, Flanged, .030 - Single bearing. For model 850. (Part No: MB-215C)$48.06
Main Bearing, 3rd Main, Flanged, .030 - Single bearing. For tractor models 950, 1050. (Part No: MB-325C)$48.06
Main Bearing, 3rd Main, Flanged, Std - Single bearing. For model 750. (Part No: AM876251)$32.52
Main Bearing, 3rd Main, Flanged, Std - For tractor models 950, 1050. (Part No: AM875928)$51.29
Main Bearing Bushing, Left Hand -
  • For John Deere tractor model B< li> < UL> (Part No: 110376)
$122.00
Main Bearing, Center, Flanged, .010 - Single bearing. For model 650. (Part No: AM876249)$45.07
Main Bearing, Center, Flanged, .030 - Single bearing. For model 650. (Part No: MB-355C)$48.06
Main Bearing, Center, Flanged, Std - Single bearing. For model 650 (Part No: AM876251)$32.52
Main Bearing, Front, .010 - Single bearing. For model 850. (Part No: CH17665)$37.26
Main Bearing, Front, .010 - Single bearing. For tractor models 950, 1050. (Part No: CH17673)$48.06
Main Bearing, Front, .030 - Single bearing. For tractor models 650, 750. (Part No: MB-152C)$48.06
Main Bearing, Front, .030 - Single bearing. For model 850. (Part No: MB-516C)$48.06
Main Bearing, Front, .030 - Single bearing. For tractor models 950, 1050. (Part No: MB-525C)$48.06
Main Bearing, Front, Rear, Std - Single bearing. For model 850. (Part No: CH10338)$37.26
Main Bearing, Front, Std - Single bearing. For tractor models 950, 1050. (Part No: CH20066)$29.66
Main Bearing Kit - .25MM -
  • For John Deere tractor models 9120, 9220, 9320, 9320T, 9330, 9410R, 9420, 9420R, 9420RX, 9420T, 9430, 9430T, 9460R, 9460RT, 9470R, 9470RT, 9510, 9510R, 9520, 9520RT, 9520RX, 9520T, 9530, 9530T, 9560R, 9560RT, 9570R, 9570RT, 9570RX, 9620, 9620T, 9630, 9630T< li>
  • Compatible with John Deere Harvester(s) CP690, 7280, 7350, 7380, 7450, 7480, 7550, 7580, 7750, 7760, 7780, 8300, 8400, 8500, 8600< li>
  • Compatible with John Deere Construction & industrial models 410E, 450CLC, 824K, 844K< li>
  • Replaces John Deere OEM number RE531764< li> < UL> (Part No: 157939)
$38.00
Main Bearing Kit - .50MM -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9410R, 9420, 9420R, 9420RX, 9420T, 9430, 9430T, 9460R, 9460RT, 9470R, 9470RT, 9470RX, 9510R, 9510RT, 9520, 9520R, 9520RT, 9520RX, 9520T, 9530, 9530T, 9560R, 9560RT, 9570R, 9570RT, 9570RX, 9620, 9620T, 9630, 9630T< li>
  • Compatible with John Deere Combine(s) S690, S690HM, S780, S790, 9750 STS (Canadian), 9860 STS, 9880 STS (Europe)< li>
  • Compatible with John Deere Harvester(s) CP690, 6650, 6750, 6850, 6950, 7200, 7280, 7300, 7350, 7380, 7400, 7450, 7480, 7500, 7550, 7580, 7700, 7750, 7760, 7780, 7800, 8300, 8400, 8500, 8600< li>
  • Compatible with John Deere Construction & industrial models 410E, 450CLC, 824K, 844K< li>
  • Replaces John Deere OEM number RE68656, RE531765< li>
  • Main Bearing Kit - .50MM< li> < UL> (Part No: 157941)
$61.00
Main Bearing Kits - For 2510 Gas with block numbers T23405, T24960, T26932, T32349 Only. 4 Cylinder, 180 CID. One kit per engine. Specify: Standard size, .010 Undersize, .020 Undersize or .030 Undersize. (Part No: MBK1442)$106.75
Main Bearing, Rear, .010 - Single bearing. For tractor models 650, 750. (Part No: CH17661)$34.60
Main Bearing, Rear, .010 - Single bearing. For model 850. (Part No: CH17665)$48.06
Main Bearing, Rear, .030 - Single bearing. For tractor models 650, 750. (Part No: MB-555C)$48.06
Main Bearing, Rear, .030 - Single bearing. For model 850. (Part No: MB-516C)$48.06
Main Bearing, Rear, .030 - Single bearing. For tractor models 950, 1050. (Part No: MB-425C)$48.06
Main Bearing, Rear, Std - Single bearing. For tractor models 650, 750. (Part No: CH15399)$32.52
Main Bearing, Rear, Std - For tractor models 950, 1050. (Part No: CH20067)$43.82
Main Bearings - .010 - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a .010 oversize set. Replaces John Deere OEM nos AR74816, AR49245 (Part No: 106342)		$133.00
Main Bearings - .010 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .010 over set of bearings replaces John Deere part numbers AT21132, AT21110 (Part No: 106796)		$96.00
Main Bearings - .010 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .010 oversize bearing set replaces John Deere part numbers AT21110, AT21132 (Part No: 106804)		$111.00
Main Bearings - .010 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .010 oversize. Replaces AR49245, AR49238 (Part No: 106817)		$135.00
Main Bearings - .010 Oversize - Main bearing kit with flanged thrust bearings, .010. 1 kit used per engine. Replaces AT21110, AT21132. For 329 CID 6 cylinder, turbo diesel engines. (Part No: 106808)$148.99
Main Bearings, .010 Oversize - Used on John Deere 301 and (341 to engine serial number 200999) gas engines. This set includes bearings and thrust washers. Replaces John Deere part numbers AR49245, AR74816 (Part No: 106825)		$133.00
Main Bearings - .010" Oversize - Set -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Engine(s) 145 (s n 10000 - earlier), 165 (s n 10182 - earlier)< li>
  • Replaces John Deere OEM number AT16295, AT10807, AT10808, AT16294< li>
  • Sold in complete set< li>
  • Bearing Size: .010" Oversize< li>
  • For Standard main bearing use Item #: 106790< li> < UL> (Part No: 106789)
$330.00
Main Bearings - .010" Oversize - Set -
  • For John Deere tractor model 3020 (s n 123000 - later)< li>
  • Replaces John Deere OEM number AR49245, AR74816< li>
  • Sold in complete set< li>
  • Bearing Size: .010" Oversize< li> < UL> (Part No: 106814)
$201.00
Main Bearings - .010" Oversize - Set -
  • For John Deere tractor models 4000, 4020< li>
  • Compatible with John Deere Engine(s) 362 (gas)< li>
  • Replaces John Deere OEM number AR74816< li>
  • Sold in complete set< li>
  • Bearing Size: .010" Oversize< li>
  • For Standard main bearing use Item #: 106830< li> < UL> (Part No: 106828)
$218.00
Main Bearings - .010" Oversize - Set -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Construction & industrial models 762, 850, 855, 860B, 862, 890, 890A< li>
  • Replaces John Deere OEM number AR104122< li>
  • Sold in complete set< li>
  • Bearing Size: .010" Oversize< li>
  • For Standard main bearing use Item #: 106845< li> < UL> (Part No: 106844)
$236.00
Main Bearings - .020 - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a .020 oversize set. Replaces John Deere OEM nos AR49246, AR49239 (Part No: 106812)		$133.00
Main Bearings - .020 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .020 over set of bearings replaces John Deere part numbers AT21112, AT21134, RE527235 (Part No: 106797)		$92.00
Main Bearings - .020 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .020 oversize bearing set replaces John Deere part numbers AT21112, AT21134, RE527235 (Part No: 106805)		$111.00
Main Bearings - .020 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .020 oversize bearing set replaces John Deere part numbers AT21112, AT21134, RE527235 (Part No: 106806)		$111.00
Main Bearings - .020 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .020 oversize. Replaces AR49246, AR49239 (Part No: 106818)		$135.00
Main Bearings, .020 Oversize - Used on John Deere 301 and (341 to engine serial number 200999) gas engines. This set includes bearings and thrust washers. Replaces John Deere part numbers AR74817, AR49246 (Part No: 106826)		$234.00
Main Bearings - .020" Oversize - Set -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Engine(s) 145 (s n 10000 - earlier), 165 (s n 10182 - earlier)< li>
  • Replaces John Deere OEM number AT24416, AT24421, AT24427, AT24433< li>
  • Sold in complete set< li>
  • Bearing Size: .020" Oversize< li>
  • For Standard main bearing use Item #: 106789< li> < UL> (Part No: 106790)
$356.63
Main Bearings - .020" Oversize - Set -
  • For John Deere tractor model 3020 (s n 123000 - later)< li>
  • Replaces John Deere OEM number AR49246, AR74817< li>
  • Sold in complete set< li>
  • Bearing Size: .020" Oversize< li>
  • For Standard main bearing use Item #: 106814< li> < UL> (Part No: 106815)
$195.00
Main Bearings - .020" Oversize - Set -
  • For John Deere tractor models 4000, 4020< li>
  • Compatible with John Deere Engine(s) 362 (gas)< li>
  • Replaces John Deere OEM number AR74817< li>
  • Sold in complete set< li>
  • Bearing Size: .020" Oversize< li>
  • For Standard main bearing use Item #: 106830< li> < UL> (Part No: 106829)
$212.00
Main Bearings - .020" Oversize - Set -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Sold in complete set< li>
  • Bearing Size: .020" Oversize< li>
  • For Standard main bearing use Item #: 106842< li> < UL> (Part No: 106841)
$188.00
Main Bearings - .020" Oversize - Set -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Construction & industrial models 762, 850, 855, 860B, 862, 890, 890A< li>
  • Replaces John Deere OEM number AR104123< li>
  • Sold in complete set< li>
  • Bearing Size: .020" Oversize< li>
  • For Standard main bearing use Item #: 106844< li> < UL> (Part No: 106845)
$325.00
Main Bearings - .030 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .030 over set of bearings replaces John Deere part numbers AT21136, AT21114 (Part No: 106798)		$84.00
Main Bearings - .030 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this ia .030 oversize bearing set replaces John Deere part numbers AT21136, RE27368 (Part No: 106806)		$111.00
Main Bearings - .030 Oversize - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. .030 oversize. Replaces AR49247, AR49240 (Part No: 106819)		$135.00
Main Bearings - .030" Oversize - Set -
  • For John Deere tractor models 4000, 4020< li>
  • Compatible with John Deere Engine(s) 362 (gas)< li>
  • Replaces John Deere OEM number AR74818< li>
  • Sold in complete set< li>
  • Bearing Size: .030" Oversize< li>
  • For Standard main bearing use Item #: 106829< li> < UL> (Part No: 106830)
$212.00
Main Bearings - .030" Oversize - Set -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Replaces John Deere OEM number AR104570< li>
  • Sold in complete set< li>
  • Bearing Size: .030" Oversize< li>
  • For Standard main bearing use Item #: 106841< li> < UL> (Part No: 106842)
$195.00
Main Bearing Set - Main bearing kit, standard, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77748 & 4-AR74814. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1 4 standard bore, 3 ring piston. Individual bearings not a For 3010, 3020 (Part No: 106820)$135.00
Main Bearing Set - Main bearing kit, .010, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77750 & 4-AR74816. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. TISCO supplies 4-1 4 standard bore, For 3010, 3020 (Part No: 106821)$135.00
Main Bearing Set - Main bearing kit, .020, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77751 & 4-AR74817. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1 4 standard bore, 3 ring piston. Individual bearings not avai For 3010, 3020 (Part No: 106822)$135.00
Main Bearing Set - Main bearing kit, .030, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77752 & 4-AR74818. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1 4 standard bore, 3 ring piston. Individual bearings not avai For 3010, 3020 (Part No: 106823)$135.00
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: 106835)$206.00
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: 106836)$206.00
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: 106837)$206.00
Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: 106838)$206.00
Main Bearing Set - MAIN Bearing SET For DIESEL 4010, 4020. STANDARD (Part No: MBK1441)$176.42
Main Bearing Set - MAIN Bearing SET For DIESEL 4010, 4020..010 (Part No: MBK1441-010)$176.42
Main Bearing Set - MAIN Bearing SET For DIESEL 4010, 4020..020 (Part No: MBK1441-020)$176.42
Main Bearing Set - Main bearing set in 0.010. For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #s R26070, R33180, R34340, R40890, R40900. Replaces YTO R-AR49243S6-010. (Part No: 106832)$110.00
Main Bearing Set - Main bearing set in 0.020. For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #s R26070, R33180, R34340, R40890, R40900. Replaces YTO R-AR49243S6-020. (Part No: 106833)$120.00
Main Bearing Set - Main bearing set in 0.030. For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #s R26070, R33180, R34340, R40890, R40900. Replaces YTO R-AR49243S6-030. (Part No: 106834)$120.00
Main Bearing Set - Complete main bearing set in STANDARD for 2 cylinder models M, 40, 320, 330. Main Bearings Set. 1 Required per engine. Replaces YTO MS-319P-STD. (Part No: 106778)$167.00
Main Bearing Set - Available in STD, .010, .020, .030 For 3010 with 201 Gas Engine with Flanged Center Main Bearing. Specify size in Comments box when ordering. (Part No: MS-836P)$105.02
Main Bearing Set - Available in STD, .010, .020 For 3010 with 201 Gas Engine with Center Main Thrust Washer. Specify size in Comments box when ordering. (Part No: MS-1526P)$179.62
Main Bearing Set - Available in STD, .010, .020, .030 For 3020 (To S#122999) with 227 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-836P)$92.89
Main Bearing Set - Available in STD, .010, .020 For 3020 (From S#123000) with 241 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-1526P)$179.62
Main Bearing Set - Available in STD, .010, .020, .030. For tractor models 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. Specify size in Comments box when ordering. (Part No: R-AR49243S4)$131.10
Main Bearing Set - Available in STD, .010, .020, .030. For tractor models 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910 &(From Eng S#280001) All. Specify size in Comments box when ordering. (Part No: R-AR74814S4)$150.54
Main Bearing Set - Available in STD, .020 For 4010 with 301 Gas Engine with Flanged Thrust Bearing. Specify size in Comments box when ordering. (Part No: MS-838P)$133.00
Main Bearing Set - Available in STD, .010, .020, .030 For 4010 with 301 Gas Engine with Thrust Washer on #3 Bearing. Specify size in Comments box when ordering. (Part No: MS-1528P)$235.87
Main Bearing Set - Available in STD, .010, .020, .030 For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S6)$113.49
Main Bearing Set - Available in STD, .020 For 4020 (To S#200999) with 341 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-838P)$133.00
Main Bearing Set - Available in STD, .010, .020, .030 For 2940, 2950, 2955, 3150, 3155 with 359 or 6059 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S6)$113.49
Main Bearing Set - Available in STD, .010, .020, .030 For 4040, 4050, 6600, 7200 with 359 or 6059 Turbo Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S6)$113.49
Main Bearing Set - Available in STD, .010, .020, .030 For 4000, 4020 (From S#201000) with 362 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-1528P)$235.87
Main Bearing Set - Main bearing set in STANDARD. For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #s R26070, R33180, R34340, R40890, R40900. Replaces YTO R-AR49243S6-STD. (Part No: 106831)$120.00
Main Bearing Set - Available in STD, .010, .020, .030 For 4000, 4010, 4020, 4040, 4230 with 404 Diesel Engine (To EngS#214999) with Block #R40930& (From Eng S#215000) All. Specify size in Comments box when ordering. (Part No: R-AR74814S6)$167.11
Main Bearing Set - Available in STD, .010, .020, .030 For 4320, 4430, 4520, 4620, 4630 with 404T, A Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR74814S6)$167.11
Main Bearing Set - Available in STD, .010, .020, .030 For 6800, 6900, 7210, 7400, 7410, 7600 with 414 or 6068 Turbo Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S6)$113.49
Main Bearing Set - Available in STD, .010, .020, .030 For 4050, 4240 with 466 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR74814S6)$167.11
Main Bearing Set - Available in STD, .010, .020, .030 For 4250, 4440, 4450, 4640, 4650, 4840, 4850 with 466T, A Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR74814S6)$167.11
Main Bearing Set - Available in STD, .010, .020, .030 For 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960 with 6076 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR74814S6)$167.11
Main Bearing Set - Available in standard, .010, .020, .030. For 5010, 5020, 6030 with 531 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR101266S6)$234.03
Main Bearing Set - Available in STD, .010, .020, .030 For 6030, 7520 with 531A Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR101266S6)$234.03
Main Bearing Set - Available in STD, .010, .020, .030 For 8630, 8640, 8650 with 619 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR101268S6)$256.49
Main Bearing Set - .010 - Main bearing kit, .010, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR49238 & 2-AR49245. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1 4 standard bore For 4010, 4020 (Part No: MBK1440-010)$128.57
Main Bearing Set, .010, 152, 162 179 Diesel - 152, 164 & 179 CID diesel engines. .010" main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255. (Part No: 106800)$96.00
Main Bearing Set - .020 - Main bearing kit, .020, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR49239 & 2-AR49246. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1 4 standard bore For 4010, 4020 (Part No: MBK1440-020)$150.51
Main Bearing Set, .020, 152, 164, 179 Diesel - 152, 164 & 179 CID diesel. .020" main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255. (Part No: 106801)$96.00
Main Bearing Set, .020, Gas - .020 Main Bearing Kit. 1 kit used per engine. For 115 CID gas engine Tractors 1010, 1020 SN# 31000>, 2010 gas, 145G SN# 30001>, 145G SN# 31000> (Part No: 106783)$189.10
Main Bearing Set, .030, 152, 164, 179 Diesel - 152, 164 & 179 CID diesel engines. .030" main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255 (Part No: 106802)$96.00
Main Bearing Set, 329 Diesel, .030 - Main bearing kit with flanged thrust bearings, .030. 1 kit used per engine. Replaces 1-AT21136 & 6-AT21114. For 329 CID 6 cylinder, turbo diesel engines. (Part No: 106810)$149.00
Main Bearing Set, 329 Diesel, STD - Main bearing kit with flanged thrust bearings, STD. 1 kit used per engine. Replaces 1-AT21134 & 6-AT21112. For 329 CID 6 cylinder, turbo diesel engine. (Part No: 106807)		$149.00
Main Bearing Set, 329 Turbo Diesel, .020 - Main bearing kit with flanged thrust bearings, .020. 1 kit used per engine. (Part No: 106809)$149.00
Main Bearing Set, Standard - For model 3010, 3020 Diesel with block # R26150, R26160, R32020, R33190, R40690, R40840, R40850, R49510, R50610, R50840, R72127. 4 Cylinder, Diesel. Standard. Replaces AR49242, AR49243 (Part No: 106816)		$135.00
Main Bearing Set - .STD - Main bearing kit, standard, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR49242 & 2-AR49243. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1 4 standard b For 4010, 4020 (Part No: MBK1440)		$128.57
Main Bearing Set, STD, 152, 164, 179 Diesel - 152, 164 & 179 CID diesel engines. Standard main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255 (Part No: 106799)$96.00
Main Bearing Single .010" Oversize -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Compatible with John Deere Engine(s) 6531 (D), 6531A, 6531T< li>
  • Replaces John Deere OEM number AR104568< li>
  • For For Set main bearing use Item #: 106840< li> < UL> (Part No: 167240)
$44.76
Main Bearing, Single .030 -
  • For John Deere tractor models 700, 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 646B, 700A, 760, 760A, 770, 770A, 772A< li>
  • Replaces John Deere OEM number AR104570< li> < UL> (Part No: 167103)
$29.26
Main Bearings Set - Complete main bearing set in STANDARD for 2 cylinder models M, 40, 320, 330. Main Bearings Set. 1 Required per engine. Replaces YTO MS-319P-STD (Part No: 106778)$167.00
Main Bearings Set - .010" Oversize -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Compatible with John Deere Engine(s) 6531 (D), 6531A, 6531T< li>
  • Replaces John Deere OEM number AR104568< li>
  • Sold in complete set< li>
  • Bearing Size: .010" oversize< li>
  • For Standard main bearing use Item #: 106842< li> < UL> (Part No: 106840)
$174.40
Main Bearings - Standard - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This Standard set of bearings replaces John Deere part numbers AT21139, AT21140 (Part No: 106795)		$96.00
Main Bearings - Standard - Used on John Deere 301 and (341 to engine serial number 200999) gas engines. This set includes bearings and thrust washers. Replaces John Deere part numbers AR49242, AR49243 (Part No: 106824)		$133.00
Main Bearings - Standard - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this bearing set replaces John Deere part numbers AT21139, AT21140 (Part No: 106803)		$110.99
Main Bearings - Standard - Used on John Deere 3010 and 3020 with 201 or 227 gas engines. This is a standard set. Replaces John Deere OEM nos AR45723 (Part No: 106811)		$131.00
Main Bearings - Standard - Set -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Engine(s) 115 (s n 15082 - earlier), 145 (s n 35833 - earlier)< li>
  • Replaces John Deere OEM number AT10807, AT10808, AT16295, AT16924< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • Full oil groove< li>
  • For .010" main bearing use Item #: 106783< li> < UL> (Part No: 106781)
$183.00
Main Bearings - Standard - Set -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Engine(s) 115 (gas, s n 15082 - earlier), 145 (gas, s n 35833 - earlier)< li>
  • Replaces John Deere OEM number AT10808, AT10807, AT16294, AT16295< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • 1 2 oil groove< li> < UL> (Part No: 106785)
$179.00
Main Bearings - Standard - Set -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Engine(s) 145 (s n 10000 - earlier), 165 (s n 10182 - earlier)< li>
  • Replaces John Deere OEM number AT10808, AT10807, AT16294, AT16295< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • For .010" main bearing use Item #: 106790< li> < UL> (Part No: 106788)
$330.00
Main Bearings - Standard - Set -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Engine(s) 145 (s n 10000 - later), 165 (s n 10182 - later)< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • For .010" main bearing use Item #: 106794< li> < UL> (Part No: 106792)
$330.00
Main Bearings - Standard - Set -
  • For John Deere tractor model 3020 (late gas, s n 123000 - later)< li>
  • Replaces John Deere OEM number AR49243, AR74814< li>
  • Engines: 241 Gas< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • For .010" main bearing use Item #: 106815< li> < UL> (Part No: 106813)
$201.00
Main Bearings - Standard - Set -
  • For John Deere tractor models 4000, 4020< li>
  • Compatible with John Deere Engine(s) 362 (gas)< li>
  • Replaces John Deere OEM number AR74814< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • For .010" main bearing use Item #: 106830< li> < UL> (Part No: 106827)
$218.00
Main Bearings - Standard - Set -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 770< li>
  • Replaces John Deere OEM number AR101266< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • For .010" main bearing use Item #: 106842< li> < UL> (Part No: 106839)
$174.50
Main Bearings - Standard - Set -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Construction & industrial models 762, 850, 855, 860B, 862, 890, 890A< li>
  • Replaces John Deere OEM number AR101393< li>
  • Sold in complete set< li>
  • Bearing Size: Standard< li>
  • For .010" main bearing use Item #: 106845< li> < UL> (Part No: 106843)
$280.00
Main Bearing - Standard - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers T23214, R515304, RE27352, AT21140 (Part No: 123852)		$9.40
Main Bearing - Standard -
  • For John Deere tractor models 8630, 8640, 8650, 8760< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860, 860A, 860B, 862, 862B, 890, 890A, 990, 992ELC< li>
  • Replaces John Deere OEM number AR101268< li> < UL> (Part No: 158390)
$32.76
Main Bearing - Standard -
  • For John Deere tractor models 500, 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR49243< li> < UL> (Part No: 166387)
$117.00
Main Bearing - Standard - Journal -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number RE65165< li>
  • Uses 4< li>
  • Bore: 4.19"< li>
  • Pin: 1.375" & 1.62"< li>
  • Engine: 4045 PowerTech 4.5L & 6.8L< li>
  • Sold per journal< li>
  • For .010" Oversize main bearing use Item #: 156337< li> < UL> (Part No: 123925)
$14.50
Main Bearing - Standard - Set -
  • For John Deere tractor models B, BO, BR< li>
  • Compatible with John Deere Engine(s) 175 (gas), 190 (gas)< li>
  • Bearing Size: Standard< li>
  • Sold in complete sets< li> < UL> (Part No: 159183)
$570.00
Main Bearing, Std - Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: 166499)$11.40
Main Bearing, Std - Single Bearing. For tractor models (7720 with 6.466T all or 6.466A with SN# up to 233592 or above 317859), 9940, (790D, 8430, 8440, 8450, 850B, 8820, 892D, 9950 with 6.466T above SN# 253373 & 6.466A SN# above 233593). (Part No: 166499)$11.40
Main Bearing, Std - Single Bearing. For tractor models 770, 870, 955, 970, 1070. (Part No: 124082)$18.76
Main Thrust Bearing - .020 -
  • For John Deere tractor models 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860B, 862, 862B, 890, 890A, 990, 992D LC, 992ELC< li>
  • Replaces John Deere OEM number AR104127< li> < UL> (Part No: 158396)
$71.00
Main Thrust Bearing - .020" Oversize - Journal -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number RE65168B< li>
  • Bearing Size: .020" Oversize< li>
  • Sold per journal< li>
  • Standard use Item #: 123928< li> < UL> (Part No: 158639)
$36.76
Main Thrust Bearing - .030 -
  • For John Deere tractor models 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860B, 862, 862B, 890, 890A, 990, 992D LC, 992ELC< li>
  • Replaces John Deere OEM number AR104128< li> < UL> (Part No: 158397)
$46.00
Main Thrust Bearing - Standard -
  • For John Deere tractor models 8630, 8640, 8650, 8760< li>
  • Compatible with John Deere Harvester(s) 5460, 5820, 5830< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860, 860A, 860B, 862, 862B, 890, 890A, 990, 992ELC< li>
  • Replaces John Deere OEM number AR101269< li> < UL> (Part No: 158394)
$35.26
Main Thrust Bearing - Standard -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR49242< li> < UL> (Part No: 168651)
$88.00
Needle Bearing -
  • For John Deere tractor model 900< li>
  • Compatible with John Deere Combine(s) 6602, 6622< li>
  • Compatible with John Deere Header(s) 200, 218, 220, 230, 240, 300, 314, 316, 319, 890, 918, 920< li>
  • Compatible with John Deere Hay Cutting(s) 1207, 1209, 1214, 1217, 1219, 1380, 1600< li>
  • Replaces John Deere OEM number JD9861< li> < UL> (Part No: 112010)
$19.26
Needle Bearing -
  • For John Deere tractor models 420, 430, 1010< li>
  • Compatible with John Deere Combine(s) 6602, 6622< li>
  • Compatible with John Deere Header(s) 78, 88, 120, 130, 135, 183, 200, 213, 215, 216, 218, 220, 222, 224, 230, 240, 278, 288, 300< li>
  • Compatible with John Deere Hay Cutting(s) 483, 485, 1207, 1209, 1214, 1217, 1219, 1380, 1424< li>
  • Replaces John Deere OEM number JD8839< li> < UL> (Part No: 112011)
$13.00
Oil Pump Drive Shaft Seal -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3340, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number AL28922< li>
  • Outside Diameter: 1.770"< li>
  • Shaft Diameter: 1.259"< li>
  • Type: Single Lip< li>
  • Width: .354"< li> < UL> (Part No: 167705)
$6.50
O-Ring -
  • For John Deere tractor models 840, 940, 1020, 1030, 1140, 1350, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2255, 2355< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A< li>
  • Replaces John Deere OEM number A4730R, 44R214< li>
  • Replaces John Deere manufacturer number VFE1013< li>
  • Width: 1 8"< li>
  • I.D.: 1"< li>
  • O.D.: 1-1 4"< li> < UL> (Part No: 115501)
$0.56
Piston Pin Bushing -
  • For John Deere tractor models M (40), 40, 320, 330, 420, 430, 440< li>
  • For 100 & 113 ci 2 cylinder gas engines< li>
  • Sold singly< li> < UL> (Part No: 108950)
$12.26
Pressure Plate Springs -
  • For John Deere tractor models 4040 (9 required), 4230 (s n 16359-later, 9 required), 4240 (12 required), 4430 (s n 22373-later, 12 required), 4440 (15 required)< li>
  • Replaces John Deere OEM number R56722< li>
  • Package of 15< li>
  • Used for powershift pressure plates< li> < UL> (Part No: 177019)
$111.00
PTO 3 Bolt Bearing Cover Gasket -
  • For John Deere tractor models 720, 730< li>
  • Replaces John Deere OEM number F2964R, F3400R< li> < UL> (Part No: 125604)
$15.26
PTO 3 Bolt Bearing Cover Gasket -
  • For John Deere tractor models 50 (with engine driven PTO), 60 (Rowcrop, s n 6025403-earlier with engine driven PTO)< li>
  • Compatible with John Deere Construction & industrial models 50 (with engine driven PTO)< li>
  • Replaces John Deere OEM number A4553R< li> < UL> (Part No: 125605)
$15.26
PTO Bearing Housing Cover Gasket -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 570, 570A, 600, 670, 670A, 672A< li>
  • Replaces John Deere OEM number R33337< li> < UL> (Part No: 161849)
$5.86
PTO Bearing Sleeve -
  • For John Deere tractor models 4010, 4020, 4320< li>
  • Replaces John Deere OEM number R26666 < li> < UL> (Part No: 177035)
$89.00
PTO Clutch Housing Cover Gasket -
  • For John Deere tractor model 50< li>
  • Replaces John Deere OEM number B3196R< li> < UL> (Part No: 125616)
$16.76
PTO Clutch Housing Cover Gasket -
  • For John Deere tractor models 60 (Rowcrop and HiCrop All s n. Standard s n 60443000-later), 70 (Rowcrop)< li>
  • Replaces John Deere OEM number A4584R< li> < UL> (Part No: 125617)
$16.76
PTO Clutch Housing Cover Gasket -
  • For John Deere tractor models 720, 730< li>
  • Replaces John Deere OEM number F2968R< li> < UL> (Part No: 125618)
$16.50
PTO CLutch Plate -
  • For John Deere tractor models 2040 (s n 350000-later), 2155, 2240, 2355, 2440 (s n 341000-later), 2555, 2640 (s n 341000-later), 2755, 2855, 2940, 2950, 2955, 3055, 3155, 3255< li>
  • Replaces John Deere OEM number L33125< li>
  • ID: 3-3 8" (86mm)< li>
  • OD: 4-3 4" (121mm)< li>
  • 3 Tabs< li> < UL> (Part No: 127060)
$8.60
PTO Drive Shaft Seal -
  • For John Deere tractor models 3020, 4020 (s n 200999-earlier), 4230, 4430 (all Drive Shaft)< li>
  • Replaces John Deere OEM number R33340< li>
  • Replaces manufacturer number CR31139< li> < UL> (Part No: 152202)
$14.76
PTO Seal -
  • For John Deere tractor models 830 (3 Cyl), 930, 1020, 1120, 1130, 1830, 2010, 2020, 2030, 2120, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020 (s n 123000-later), 3030, 3120, 3130, 4000, 4020 (s n 201000-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Replaces John Deere OEM number RE13181, AT16431, AT167936, CR28669< li> < UL> (Part No: 121741)
$6.30
PTO Seal -
  • For John Deere tractor models 830, 930, 940, 1020, 1030, 1040, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2555, 2650, 2750, 2755, 2850< li>
  • Replaces John Deere OEM number AL56820< li> < UL> (Part No: 122275)
$12.26
PTO Seal -
  • For John Deere tractor models 820 (3 Cyl.), 920, 1020, 1030, 1035, 1120, 1130, 1520, 1630, 1635, 2020, 2030, 2035, 2120, 2440, 3010, 4010< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 400, 401< li>
  • Replaces John Deere OEM number AR26706< li>
  • Outside Diameter: 4.506"< li>
  • Shaft Diameter: 3.500"< li>
  • Type: Dual Lip< li>
  • Width: .374"< li> < UL> (Part No: 161850)
$21.00
PTO Seal, 1000 RPM -
  • For John Deere tractor models 4520, 4620, 5010, 5020, 6030< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7720, 7722, 8820, 9400, 9500, 9501, 9600< li>
  • Compatible with John Deere Construction & industrial models 515< li>
  • Replaces John Deere OEM number R35643< li> < UL> (Part No: 109666)
$12.30
PTO Shaft Oil Seal Housing Gasket -
  • For John Deere tractor models A (s n 488000-later), ANH (s n 488000-later), AO (less Powertrol), AR (less Powertrol), AW (s n 488000-later), B (s n 201000-later), BN (s n 201000-later), BNH (s n 201000-later), BW (s n 201000-later), BWH (s n 201000-later), G (s n 43352-later), GH (s n 43352-later), GM (s n 43352-later), GN (s n 43352-later), GW (s n 43352-later), R, 50, 60 (s n 6025403-earlier with engine driven PTO), 70 (s n 7017500-later with transmission driven PTO & less Powertrol)< li>
  • Replaces John Deere OEM number A2396R< li> < UL> (Part No: 153580)
$4.56
PTO Shaft Oil Seal Housing Gasket/Shim -
  • For John Deere tractor models 60, 70 (Used on Rowcrop), 620, 630, 720, 730 (Used on Rowcrop)< li>
  • Replaces John Deere OEM number F1459R, F1460R< li>
  • Priced and Sold in Sets of Gaskets< li> < UL> (Part No: 125636)
$12.76
Range Gearbox Gasket -
  • For John Deere tractor models 7200, 7210, 7400, 7405, 7410, 7500, 7505, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number R95396< li> < UL> (Part No: 179546)
$10.40
Rear Axle Final Drive Gasket -
  • For John Deere tractor models 2651, 2840, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3120, 3130, 3135, 3140, 3150, 3340, 3350, 3351, 3640, 3650, 3651< li>
  • Replaces John Deere OEM number L62426, T28836< li> < UL> (Part No: 179549)
$9.16
Rear Axle Gasket -
  • For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N< li>
  • Compatible with John Deere Construction & industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315D, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 415B, 480, 480A, 480B, 480C, 482C, 510B, 510C, 510D, 515B< li>
  • Replaces John Deere OEM number L61922, R98915, T21419< li> < UL> (Part No: 158869)
$8.70
Rear Axle Guide -
  • For John Deere tractor models 820, 830, 920, 930 (all 3 cylinder), 1020, 1030, 1120, 1130, 1630, 1640, 1641, 1641F, 1830, 2020, 2030, 2040, 2120, 2130, 2140 (s n 430000-later), 2150, 2155 (s n 765145-earlier), 2240 (s n 350000-later), 2350, 2550, 2750, 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5310, 5320, 5400, 5415, 5420, 5500, 5510, 5520, 5605, 5615, 5705, 5715< li>
  • Compatible with John Deere Combine(s) 6620, 7720, 8820< li>
  • Compatible with John Deere Construction & industrial models 210, 210C, 300, 300D, 310, 310D, 315, 315D< li>
  • Replaces John Deere OEM number T21429, L35542< li> < UL> (Part No: 152276)
$9.00
Rear Axle Housing Gasket -
  • For John Deere tractor models 4520, 4620, 4630, 4640, 4840, 7020, 7520, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number R99394, R43227, R58295, R65308< li> < UL> (Part No: 179550)
$21.10
Rear Axle Seal -
  • For John Deere tractor model 850< li>
  • Dimensions: 60 x 80 x 12TC< li> < UL> (Part No: 186752)
$9.32
Rear Axle Shaft Seal -
  • For John Deere tractor models 4020, 4040, 4050, 4230, 4240, 4320, 4430, 7520 (1972 through 1975)< li>
  • Compatible with John Deere Construction & industrial models 600, 644A< li>
  • Replaces John Deere OEM number R33027< li>
  • Seal Diameter: 4.003"< li>
  • Shaft Diameter: 3.283"< li>
  • Width: .374"< li> < UL> (Part No: 161851)
$13.00
Rear Transmission Cover Gasket -
  • For John Deere tractor models 4000, 4020 (s n 201000-later), 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Compatible with John Deere Construction & industrial models 670B, 672B< li>
  • Replaces John Deere OEM number R92411, R40947, R80965< li> < UL> (Part No: 169740)
$11.40
Release Bearing -
  • For John Deere tractor models 4520, 4620< li>
  • Replaces John Deere OEM number AR43084< li>
  • Inside Diameter Range: 2.750" - 2.999"< li>
  • Inside Diameter: 2.953"< li>
  • Outside Diameter: 4.527"< li>
  • Width: 0.864"< li> < UL> (Part No: 176783)
$119.00
Rod Bearing - Connecting rod bearing, standard size. 4 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: 106759)$10.00
Rod Bearing - Connecting rod bearings, .020 undersize. 4 used per engine. Replaces AR68415. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: 106761)$12.26
Rod Bearing - Connecting rod bearing, .030 undersize. 4 used per engine. Replaces AR68416. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: 106762)		$12.26
Rod Bearing - Rod Bearing in 0.010. For tractor models 40, (320 from SN# 320855), 330, 420, 430, 440. Rod Bearing sold individually, 2 Required per engine. Journal measures 2.489 inches. Replaces RP251314 and CB-436B-010. (Part No: 106743)$20.99
Rod Bearing - Rod Bearing in 0.010. For tractor models M, (320 with SN# up to 320854). Sold as individual pairs for 1 rod. 2 Required per engine. Journal measures 2.240 inches. Replaces RP251288 and R-402P-010. (Part No: 106739)$37.49
Rod Bearing - Rod Bearing in 0.020. For tractor models M, (320 with SN# up to 320854). Sold as individual pairs for 1 rod. 2 Required per engine. Journal measures 2.230 inches. Replaces RP251289 and R-402P-020. (Part No: 106740)$35.99
Rod Bearing - Rod Bearing in 0.030. For tractor models M, (320 with SN# up to 320854). Sold as individual pairs for 1 rod. 2 Required per engine. Journal measures 2.220 inches. Replaces RP251291 and R-402P-030. (Part No: 106741)$37.49
Rod Bearing - Rod Bearing in 0.010. For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Priced each. If you order 1, you will receive bearings for 1 rod. Journal measures 2.990 inches. Replaces RP251433 and CB-468P-010. (Part No: 106733)$17.25
Rod Bearing - Rod Bearing in 0.010. For B, BN, BW, all from SN# 96000, 50. Journal measures 2.740 inch. 2 required per engine price is for each. Replaces YTO CB-469P-010, AB4942R, and NAB4924R. (Part No: 106736)$22.25
Rod Bearing - Rod Bearing in STANDARD. For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Priced each. If you order 1, you will receive bearings for 1 rod. Standard journal measures 3.000 inches. Replaces AA5351R, NAA5351R, and CB-468P-STD. (Part No: 106732)$19.19
Rod Bearing, .010 - For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: 106768)$15.26
Rod Bearing, .010 - Connecting rod bearing, .010 undersize. 4 used per engine. Replaces AR68414. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: 106760)$12.26
Rod Bearing, .010 - Single bearing. For tractor models 770, 870, 955, 970, 1070. (Part No: 124084)$15.26
Rod Bearing, .010 - Single bearing. For tractor models 650, 750. (Part No: AM876250)$23.26
Rod Bearing, .010 - Single bearing. For model 850. (Part No: 184528)$33.41
Rod Bearing, .010 - Single bearing. For tractor models 950, 1050. (Part No: AM875937)$34.67
Rod Bearing, .010, Diesel - (JD) Rod Bearing 010 (Single Pair) - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. Single rod bearing .010 . For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: 106756)		$10.00
Rod Bearing, .010, Gas - SINGLE rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 2520 SN# 157354>, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODEL, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G (Part No: 106752)$17.76
Rod Bearing, .020 - For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: 106769)$15.26
Rod Bearing, .020, Diesel - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. Single rod bearing .020". For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: 106757)		$7.26
Rod Bearing, .020, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Part No: 106753)		$17.76
Rod Bearing, .030 - Single bearing. For tractor models 770, 870, 955, 970, 1070. (Part No: 188664)$24.98
Rod Bearing, .030 - Single bearing. For tractor models 650, 750. (Part No: RB-55C)$32.06
Rod Bearing, .030 - Single bearing. For model 850. (Part No: RB-16C)$32.06
Rod Bearing, .030 - Single bearing. For tractor models 950, 1050. (Part No: RB-45C)$32.06
Rod Bearing, .030, Diesel - Single rod bearing .030". Fits 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: 106758)		$9.10
Rod Bearing Pair, 010 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: 106341)$11.76
Rod Bearing Pair, .020 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: 106765)$11.76
Rod Bearing Pair 030 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: 106766)$11.76
Rod Bearing, Pair STD - SINGLE Bearing. For the following 4 and 6 cylinder Gas and Diesel engines: 201, 230, 254, 381, 404. Used on the following tractors: 3010, 3020, 4010, 4020, 4320, 4520, 4620, 7020. Specify size and quantity needed when ordering. Sizes available: STD, .010, .020 or .030. (Part No: 106763)$11.76
Rod Bearings - Rod Bearing in 0.020. For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Priced each. If you order 1, you will receive bearings for 1 rod. Journal measures 2.98 inches. Replaces AA6089R, NAA6089R, and CB-468P-020. (Part No: 106734)$16.75
Rod Bearings - Rod Bearing in 0.020. For B, BN, BW, all from SN# 96000, 50. Journal measures 2.730 inch. 2 required per engine price is for each. Replaces YTO CB-469P-020, AB4944R, NAB4944R. (Part No: 106737)$21.75
Rod Bearings - USE AT10123 (Part No: 106751)$15.60
Rod Bearings - For 520, 530. Rod Bearings. Priced each. 2 Required per engine. Available in STANDARD ONLY. (Part No: 106748)$26.00
Rod Bearings - For tractor models 620, 630. Rod Bearings. Priced each. 2 required per engine. Available in Standard, .010, .020, .030. Specify size in comments section of order form when ordering. (Part No: CB-643P)$29.80
Rod Bearing, SINGLE - Rod Bearing in STANDARD. For tractor models 40, (320 from SN# 320855), 330, 420, 430, 440. Rod Bearing sold individually, 2 Required per engine. Standard journal measures 2.499 inches. Replaces AM1783T, M1847T, RP251311, and CB-436B-STD. (Part No: 106742)$21.00
Rod Bearing, Std - For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: 106767)$15.26
Rod Bearing, Std - Single bearing. For tractor models 650, 750. (Part No: 185880)$21.24
Rod Bearing, Std - Single bearing. For model 850. (Part No: 184531)$23.27
Rod Bearing, Std - Single bearing. For tractor models 950, 1050. (Part No: AM875930)$32.06
Rod Bearing, Std - Single bearing. For tractor models 770, 870, 955, 970, 1070. (Part No: 124083)$15.26
Rod Bearing, STD - Single Bearing. For tractor models (4055, 4255, 4455, 4555, 4560, 7700, 770BH, 772B, 772BH, 7800, 792D, 792LC, 8100, 8300, 850C, 892E, 892LC, 9500, 9600, 9960, 9965 with 6.076H above SN# 500000, 6.076T, 6.076A 6 cyl engine), (4250, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & with 6.466A SN# 317859 and up), 5720, (4440, 4640, 6620, 6622, 7720 with 6.466T all & 6.466A up to SN# 233592 and above 317859), (4755, 4760, 644E, 644ER, 740E, 740G, 748E, 748G with 6.076H, 6.076T or 6.076H eng.), (4840, 5730, 644C, 690C, 762A, 762B, 770A, 770B, 790D, 8430, 8440 with 6.466T up to SN# 253372 & 6.466A up to SN# 317858). (Part No: 106767)$15.26
Rod Bearing, STD - Single Bearing. For tractor models (8450, 850B, 8820, 892D, 9950 with 6.466T SN# up to 253372 & 6.466A up to SN# 317858), (4850, 740A 6.466A SN# 233593-317858), (4955, 4960, 6.076H up to SN# 499999 6.076T, 6.076A), 644D, 646A, 740A with 6.466D), (770B 6.076H SN# above 500000, 6.076T, 6.076A), (9940 with 6.466T all or with 6.466A SN# up to 233592 or above 317859). (Part No: 106767)$15.26
Rod Bearing, STD, Diesel - Single rod bearing. Fits 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: 106755)		$7.19
Rod Bearing, STD, Gas - SINGLE (STD size) rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 GAS with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G, JD544 EARLY, JD544 LATE (Part No: 106751)		$15.60
Sealing Ring -
  • For John Deere tractor models 2155 (s n 651780-later), 2355N< li>
  • Replaces John Deere OEM number L55844, L170667< li>
  • Sold individually< li> < UL> (Part No: 166251)
$3.86
Sealing Washer - Brake Disc Assembly -
  • For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s n 438364-earlier), 1641, 1641F, 1830, 2020, 2030 (s n 187301-later), 2040 (s n 438364-earlier), 2040S (s n 438364-earlier), 2120, 2130, 2140 (s n 438364-earlier), 2240, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 302A, 310, 310A, 315, 315CH, 400, 401, 401B, 401C, 401D, 410 (s n 192000-earlier), 410B, 410D (s n 796854-earlier), 415B, 510, 510D (s n 796854-earlier), 515B< li>
  • Replaces John Deere OEM number R50704, T22103< li>
  • ID: 10.984"< li>
  • Thickness: .134"< li>
  • Durometer: 70< li>
  • OD: 11.252"< li>
  • Sold individually< li> < UL> (Part No: 152954)
$4.66
Shift Cover Manifold Gasket -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651< li>
  • Replaces John Deere OEM number L61964, L33775, L33766, L42048< li> < UL> (Part No: 179562)
$3.50
Shim Kit -
  • For John Deere tractor models 4000 (s n 250000-earlier), 4010, 4020 (s n 250000-earlier), 5020< li>
  • Compatible with John Deere Construction & industrial models 700A< li>
  • Replaces John Deere OEM number X741036< li> < UL> (Part No: 165767)
$15.00
Spring -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455< li>
  • Replaces John Deere OEM number R81466< li> < UL> (Part No: 117248)
$6.40
Steering Clutch Disc -
  • For John Deere Construction & industrial models 450, 450B< li>
  • Replaces John Deere OEM number T20716, T211832, T44129< li>
  • O.D.: 10.875"< li>
  • Teeth: 38 Internal< li>
  • Fiber Disc< li> < UL> (Part No: 128471)
$16.50
Throw-Out Bearing -
  • For John Deere tractor models 840, 940, 1040, 1140, 1640, 2040, 2150, 2255, 2350< li>
  • Replaces John Deere OEM number AL120098< li> < UL> (Part No: 176332)
$281.00
Throwout Sleeve -
  • For John Deere tractor models 4000, 4020 (s n 201000-later), 4320< li>
  • Replaces John Deere OEM number AR40572< li>
  • Replaces John Deere Casting number R40734< li> < UL> (Part No: 165136)
$340.00
Thrust Bearing -
  • For John Deere tractor models 500, 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR77754< li> < UL> (Part No: 167105)
$25.76
Thrust Bearing - 0.010 -
  • For John Deere tractor models 500, 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR77756< li> < UL> (Part No: 167245)
$30.26
Thrust Bearing - 0.020 -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR77757< li> < UL> (Part No: 167293)
$27.50
Thrust Bearing - 0.030 -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR77758< li> < UL> (Part No: 167294)
$27.50
Thrust Bearing - 010 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers (Part No: 123859)		$27.00
Thrust Bearing - .020 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE527235, AT21134 (Part No: 123860)		$34.76
Thrust Bearing - 030 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21136, RE527236 (Part No: 123861)		$34.76
Thrust Bearing Set - 0.030 -
  • For John Deere tractor models 830, 930, 940, 1030, 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840 (s n 429999-earlier), 1850, 1850N, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2940, 2950, 2955 (s n 765516-earlier), 3030, 3040, 3130, 3140, 3150, 3155, 3340, 3350, 4040S, 4050, 4240S, 4250, 4450, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Combine(s) 1165, 1175, 4425, 4435< li>
  • Compatible with John Deere Harvester(s) 7440, 7445, 9920, 9930< li>
  • Compatible with John Deere Engine(s) 3179 (Repower and OEM), 4039 (Repower and OEM), 4045 (s n 100000-499999), 4045 (DF092, s n 100000-499999, Repower), 4045 (TF092, s n 100000-499999, Repower), 4239, 6059 (s n 100000-499999), 6059DF092 (Repower, s n 100000-499999), 6068 (s n 100000-499999), 6068 (TF092, Repower, s n 100000-499999), 6359, 6359D, 6359T< li>
  • Compatible with John Deere Hay Cutting(s) 2360, 3430, 3830< li>
  • Replaces John Deere OEM number RE27366, AR81790< li> < UL> (Part No: 167246)
$43.76
Thrust Bearing Set, .010 - For tractor models (690, 690A SN# 335845 and below 6.404T A 6 cyl eng.), (690B SN# 335845 and up 6.404T A 6 cyl eng.), (690C with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (693C, 740 SN# 335845 and up 6.404T A 6 cyl eng.), (740A 6.466D 6 cyl eng.), (740E, 740G, 748E, 748G with 6.076A, 6.076H, 6.076T 6 cyl eng.), (762A with 6.466D & with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (762B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (7700 with 6.404D SN# 215000-335845 & 6.404T A SN# 335845 and up & 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (770A with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (770B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up & 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (770BH 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.) (Part No: 155964)$31.26
Thrust Bearing Set, .010 - For tractor models (5720, 5730 with 6.466T, 6.466A 6 cyl eng.), (600 SN# 335845 and below 6.404D 6 cyl eng.), (644, 644A SN# 335845 and below 6.404T A 6 cyl eng.), (644C with 6.466T SN# 253373 and up & 6.466A 233593 and up 6 cyl eng.), (644D with 6.466D 6 cyl eng.), (644E, 644ER with 6.076H, 6.076T, 6.076A 6 cyl eng.), (646, 646B SN# 335845 and below 6.404T A 6 cyl eng.), (646A with 6.466D 6 cyl eng.), (6600 with 6.404D 6 cyl eng.), (6602 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (6620 with 6.466T & with 6.466A SN# 317859 and up & with 6.466D SN# 335846 and up 6 cyl eng.), (6622 with 6.466T SN# 253372 and below & with 6.466A SN# 233592 and below & 317859 and up 6 cyl eng.) (Part No: 155964)$31.26
Thrust Bearing Set, .010 - For tractor models (4630 SN# 335845 and up with 6.404T A 6 cyl eng.), (4640 with 6.466T & with 6.466A with SN# 233592 and below & 317859 and up 6 cyl eng.), (4650 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6 cyl eng.), (4755 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4760 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4840 with 6.466T SN# 253372 an below & 6.466A SN# 317858 and below 6 cyl eng.), ((4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955, 4960 SN# 499999 and below with 6.076T, 6.076A, 6.076H 6 cyl eng.), (500A, 500B, 500C, 510 SN# 280000 and up with 4.270 4 cyl eng.), (5440 with 6.404T A 6 cyl eng.), (5460 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng. (Part No: 155964)$31.26
Thrust Bearing Set, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T A 6 cyl eng.), (4430 SN# 335845 and up 6.404T A 6 cyl eng.), (4440 with 6.466T & SN# less than 233592 & 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above & 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T A 6 cyl eng.) (Part No: 155964)$31.26
Thrust Bearing Set, .010 - For tractor models (7720 6.466T & with 6.466A SN# 233592 and below & 317859 and up 6 cyl eng.), (772B, 772BH, 7800 with 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (790D with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (792D, 792LC, 8100, 8300 SN# 500000 and up 6.076T, 6.076A, 6.076H 6 cyl eng.), (8430, 8440, 8450, 850B, 8820, 892D, 9940, 9950 with 6.466T SN# 253372 and below & 6.466A SN# 317858 and below 6 cyl eng.), (892E, 892LC, 9500, 9600, 9960, 9965 SN# 500000 and up with 6.076A, 6.076H, 6.076T 6 cyl eng.), (JD740A SN# 233593-317858 with 6.466A 6 cyl eng.) (Part No: 155964)$31.26
Thrust Bearing Set, Standard - For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). Thrust washers available as part number AR77747 (Part No: 166224)		$8.06
Thrust Bearing Set, Standard - For tractor models (7720 with 6.466T all or 6.466A with SN# up to 233592 or above 317859), 9940, (790D, 8430, 8440, 8450, 850B, 8820, 892D, 9950 with 6.466T above SN# 253373 & 6.466A SN# above 233593). Thrust washers available as part number AR77747 (Part No: 166224)		$8.06
Thrust Bearing - Standard - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21139, T23215 (Part No: 123858)		$34.76
Thrust Bearing - Standard - Journal -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number RE65168< li>
  • Uses 1< li>
  • Bore: 4.19"< li>
  • Pin: 1.375" & 1.62"< li>
  • Engine: 4045 PowerTech 4.5L & 6.8L< li>
  • .010" Oversize use Item #: 158639< li> < UL> (Part No: 123927)
$14.26
Thrust Main Bearing - .010" Oversize -
  • For John Deere tractor models 5010, 5020, 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 644B, 646, 646B, 700A, 760, 760A, 770, 770A, 770AH, 772A, 772AH< li>
  • Replaces John Deere OEM number AR104564< li> < UL> (Part No: 167291)
$34.76
Thrust Main Bearing - .020 -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Combine(s) CTS, 985, 1085, 1177, 1177H4, 1188, 1188H4, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 540E, 540G, 548E, 548G, 640E, 640G, 644C, 644D, 644E, 644ER, 644G, 646, 646B, 646C, 648E, 648G, 653E, 690, 690A, 690B, 690C, 690CR, 693B, 693C, 740, 740A, 740E, 740G, 743, 743A, 748E, 748G, 750C, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 792DLC, 850B, 850C, 892ELC< li>
  • Replaces John Deere OEM number AR77751< li> < UL> (Part No: 166290)
$21.00
Thrust Main Bearing .020" -
  • For John Deere tractor models 2040S, 2140, 2450, 2650, 2850, 2940, 3140, 3150, 3340, 3350, 4040, 4040S, 4240S< li>
  • Compatible with John Deere Harvester(s) 7440, 7445, 9920, 9930< li>
  • Replaces John Deere OEM number AR81789< li> < UL> (Part No: 166393)
$48.00
Thrust Washer -
  • For John Deere tractor models 1640 (s n 430000-later), 1830, 2030, 2040 (s n 430000-later), 2040S (s n 430000-later), 2130, 2140 (s n 430000-later), 2155, 2350, 2355, 2355N, 2440 (s n 30999-earlier), 2440 (s n 341000-later), 2510, 2520, 2550, 2555, 2630, 2640 (s n 341000-later), 2640 (s n 340999-earlier), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3010, 3020 (s n 122999-earlier), 3020 (s n 123000-later), 3030, 3040 (s n 430000-later), 3055, 3130, 3140 (s n 430000-later), 3150, 3155, 3255, 4000 (s n 201000-later), 4010, 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s n 024999-earlier), 5020 (s n 025000-later), 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 300B, 415B, 515B< li>
  • Replaces John Deere OEM number R72507< li> < UL> (Part No: 113870)
$40.26
Thrust Washer Set - .007 -
  • For John Deere tractor models 3010 (Late Gas with block #'s: R40910), 3020 (Late Gas s n 123)< li>
  • Replaces John Deere OEM number AR77753< li>
  • .007< li> < UL> (Part No: 157696)
$28.76
Transmission Case Cover Gasket -
  • For John Deere tractor models 4000, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number R33425< li> < UL> (Part No: 161858)
$14.00
Transmission Clutch Oil Pump Gasket -
  • For John Deere tractor models 2510, 3020, 4000, 4020< li>
  • Compatible with John Deere Construction & industrial models 440, 440A, 440B, 540, 540A, 540B, 540D, 548D, 570, 570A, 610B, 640, 640 (s n 314954 - later), 648D, 710B< li>
  • Replaces John Deere OEM number R100234, R70251, R33166, R49295, R57915, R69587< li> < UL> (Part No: 115233)
$8.06
Transmission Clutch Oil Pump Gasket -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020< li>
  • Compatible with John Deere Construction & industrial models 440, 440A, 440B, 540, 540A, 540B, 570, 570A, 640< li>
  • Replaces John Deere OEM number R100232< li> < UL> (Part No: 176674)
$9.00
Transmission Release Bearing -
  • For John Deere tractor models 1450 (Double Clutch), 1650 (Double Clutch), 5103 (Double Clutch), 5105 (Double Clutch), 5200 (Collar Shift), 5200 (Top Shaft Synchronized), 5205 (Double Clutch), 5210 (Collar Shift), 5210 (Sync Shuttle), 5220 (Collar Shift), 5220 (Sync Shuttle), 5300 (Collar Shift), 5300 (Top Shaft Synchronized), 5303 (Double Clutch), 5310 (Collar Shift), 5310 (Sync Shuttle), 5310N (Sync Shuttle), 5320 (Collar Shift), 5320 (Sync Shuttle), 5320N (Sync Shuttle), 5400 (Collar Shift), 5400 (Top Shaft Synchronized), 5400N (Sync Shuttle), 5403 (Double Clutch), 5410 (Collar Shift), 5410 (Sync Shuttle), 5420 (Collar Shift), 5420 (Sync Shuttle), 5420N (Sync Shuttle), 5425 (Sync Shuttle), 5500 (Collar Shift), 5500 (Top Shaft Synchronized), 5500N (Sync Shuttle), 5510 (Sync Shuttle), 5510N (Sync Shuttle), 5520 (Collar Shift), 5520 (Sync Shuttle), 5520N (Sync Shuttle), 5605 (Double Clutch), 5615 (Collar Shift), 5615 (Sync Shuttle), 5705 (Double Clutch), 5715 (Collar Shift), 5715 (Sync Shuttle)< li>
  • Replaces John Deere OEM number AZ20216, CH18562< li>
  • Bearing Sides: 2 contact seals< li>
  • Bore: 1.772"< li>
  • OD: 2.953"< li>
  • Width: .630"< li> < UL> (Part No: 168031)
$13.00
Washer -
  • For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1350, 1530, 1550, 1630, 1750, 1850, 2040, 2240< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302< li>
  • Replaces John Deere OEM number T22098< li>
  • Inside Diameter: .801"< li>
  • Outside Diameter: 1.001"< li>
  • Thickness: .190"< li>
  • Teflon< li> < UL> (Part No: 122135)
$5.56
Washer, Brake Disc -
  • For John Deere tractor models 2030, 2440, 2630, 2640, 2840, 2940, 2950, 3030, 3040, 3120, 3130, 3140< li>
  • Compatible with John Deere Construction & industrial models 210C, 300B, 301A, 302, 302A, 310, 310A, 310B, 310C, 315C, 315CH, 380, 401B, 401C, 401D, 410, 410B, 410C, 415B, 480A, 480B, 480C, 482C, 510B, 510C, 515B, 610C< li>
  • Replaces John Deere OEM number T135749, T28473< li>
  • O.D.: 11.752"< li>
  • I.D.: 11.484"< li>
  • Thickness: 0.14"< li>
  • Durometer: 70< li> < UL> (Part No: 168067)
$11.06
Wheel Hub Seal -
  • For John Deere tractor models 5320, 5325, 5420, 5425, 5520, 5525
  • Replaces John Deere OEM number RE195990< li> < li>
  • Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 5610S, 6610S, 7610S< li>
  • Replaces New Holland OEM number 87313744, CAR47702< li>
  • Replaces Carraro manufacturer number 47702< li> < UL> (Part No: 154673)
$55.00
Wheel Hub Seal -
  • For John Deere tractor models 5425, 5525< li>
  • Replaces John Deere OEM number RE238999< li>
  • Replaces Carraro manufacturer number 149702< li> < UL> (Part No: 154702)
$60.00
 
Engine Gaskets
Carburetor Mounting Gasket -
  • For John Deere tractor models A (series), B (series), D, G, H< li>
  • Replaces John Deere OEM number 321R< li>
  • Carburetor to manifold mounting gasket< li> < UL> (Part No: 112103)
$5.30
Clutch Housing to Cylinder Block Gasket -
  • For John Deere tractor models 4050 (s n 006509-earlier), 4250 (s n 011345-earlier), 4450 (s n 022618-earlier)< li>
  • Replaces John Deere OEM number R99286< li> < UL> (Part No: 179508)
$18.70
Complete Gasket Overhaul Kit - For model 2510 Gas with block numbers T23405, T24960, T26932 or T32349 Only. 4 Cylinder, 180 CID. One set used per engine. Kit includes Complete Gasket set with crankshaft seals and sleeves (where required). (Part No: FS3800G)$261.54
Complete Gasket Overhaul Kit - For model 2510 Gas with block numbers T23406, T24961, T26933 or Diesel T32342, R53250, R55034 Only. 4 Cylinder, 202 CID, 3.86” Std bore. One set used per engine. Kit includes Complete Gasket set with crankshaft seals and sleeves (where required). (Part No: FS3800W)$158.33
Complete Gasket Overhaul Kit - For model 3010 Gas with block #R26150 Only. 4 Cylinder, 201 CID, Overbore to 4-3 16, 5 Ring Piston. One set used per engine. Kit includes Complete Gasket set with crankshaft seals and sleeves (where required). (Part No: 106937)$93.00
Complete Gasket Overhaul Kit - For 3010 Diesel with block #R26160 Only. 4 Cylinder, 254 CID, Overbore 4- to 4-1 4. 3 Ring Piston, Keystone top compression ring. One set used per engine. Kit includes Complete Gasket set with crankshaft seals and sleeves (where required). (Part No: FS3217W)$251.63
Complete Gasket Set without Seals - For tractor models (4250, 4450, 4650, 5460, 6602, 762B, 770A, 790D with 6.466T SN# above 253373 & 6.466A above SN# 317859 6 cyl.), (4440, 4640, 6620, 6622 with 6.466T & (6.466A SN# up to 233592 and above SN# 317859), (4840, 5730, 644C, 690C, 7720, 8430, 8440, 8450, 8820 with 6.466T SN# up to 253372 & 6.466A up to SN# 317858), (4850 6.466A SN# 233593-317858), (5720, 9940 with 6.466T or 6.466A), (644D, 646A with 6.466D 6 cyl), (740A with 6.466D all with 6.466A SN# 233593-317858), (762A with 6.466D all with 6.466T SN# above 253373 with 6.466A SN# above 233593), (850B, 892D, 9950 with 6.466T above SN# 253373 & 6.466A SN# above 233593) (Part No: 106945)$201.00
Conversion Gasket Set -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520< li>
  • Replaces John Deere OEM number AR70998< li>
  • Engine: 135, 164, 180, 202, 219 Gas< li>
  • Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set< li> < UL> (Part No: 106957)
$143.00
Conversion Gasket Set -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Engine(s) 201, 227 (Gas)< li> < UL> (Part No: 106958)
$44.26
Conversion Gasket Set -
  • For John Deere tractor model 4030< li>
  • Compatible with John Deere Engine(s) 303 (Gas)< li>
  • Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set (crankshaft seals not included)< li> < UL> (Part No: 106960)
$83.00
Conversion Gasket Set -
  • For John Deere tractor models 6030, 7520< li>
  • Compatible with John Deere Construction & industrial models 644, 644B, 770< li>
  • Engines: 531T< li>
  • Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set (crankshaft seals not included)< li> < UL> (Part No: 106961)
$122.00
Cork Flywheel Spacer Washer Oil Seal - This Cork Flywheel Spacer Washer Oil Seal has a 2.24 inch Inside Diameter, a 2.648 inch Outside Diameter and is .32 inch wide. Installs in oil slinger housing behind the flywheel. Used with AB251R or AB4109R spacer. It Fits: B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40. Replaces: B130R (Part No: 182948)		$21.76
Crankshaft Seal, Front - For tractor models All Industrial Construction with 6.404D, (6.466D SN# 335846 and up). (Part No: 106851)$12.60
Crankshaft Seal, Front - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Part No: 106851)$12.60
Crankshaft Seal, Front - For tractor models (4955, 4960 6.076H SN# up to 499999 & 6.076H, 6.076T), (6600 SN# 215000-335845 with 6.404D & SN# 335845 and up with 6.404T A), (6602 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (6620, 6622 with 6.466T all & 6.466A SN# up to 233592 and above 317859). (Part No: 106851)$12.60
Crankshaft Seal, Front - For tractor models 850, 950, 1050. (Part No: 183983)$11.20
Crankshaft Seal, Front - For tractor models 650, 750. (Part No: CH15390)$9.50
Crankshaft Seal, Front - For tractor models 655, 755, 770, 790, 855, 870, 955, 970, 990, 1070. (Part No: 124086)$4.56
Crankshaft Seal, Rear - For tractor models All Industrial Construction with 6.404D, (6.466D SN# 335846 and up). (Part No: 106856)		$27.50
Crankshaft Seal, Rear - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Replaces RE520036, RE17352, RE22764, AR63095, RE14953, RE504363, RE530121 (Part No: 106856)		$27.50
Crankshaft Seal, Rear - For tractor models (4955, 4960 6.076H SN# up to 499999 & 6.076H, 6.076T), (6600 SN# 215000-335845 with 6.404D & SN# 335845 and up with 6.404T A), (6602 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (6620, 6622 with 6.466T all & 6.466A SN# up to 233592 and above 317859). (Part No: 106856)		$27.50
Crankshaft Seal, Rear - For tractor models 950, 1050. (Part No: 186385)$15.98
Crankshaft Seal, Rear - For tractor models 650, 750. (Part No: CH15402)$16.41
Crankshaft Seal, Rear - For tractor models 655, 670, 755, 770. (Part No: 173167)$10.06
Crankshaft Seal, Rear - For model 850. (Part No: CH10340)$13.03
Crankshaft Seal, Rear - For tractor models 870, 955, 970, 1070. (Part No: 124087)$10.79
Cylinder Block Plate Gasket -
  • For John Deere tractor models 820, 830, 920, 930, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3030, 3130, 3300, 4030, 4050, 6600< li>
  • Compatible with John Deere Combine(s) 925, 935, 945, 955, 965, 965 (H), 968 (H), 975, 985< li>
  • Replaces John Deere OEM number R90648, R131794, R73140, T24965< li> < UL> (Part No: 176678)
$10.25
Drain Plug Gasket -
  • For John Deere tractor models 1020, 1520, 2010, 2020, 2030, 2040, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2640, 2750, 2755, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 5200, 5210, 5300, 5310, 5310N, 5400, 5410, 5500, 5510, 5510N, 6030, 6100, 6120L, 6200, 6220L, 6300, 6320, 6320L, 6400, 6420, 6420L, 6520L, 7020, 7200, 7210, 7400, 7410, 7510, 7520, 7610, 7710, 7720, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Construction & industrial models 500, 500C, 510, 540E, 540G, 548E, 548G, 600, 640E, 640G, 644, 644C, 644D, 644E, 644G, 646, 646C, 648E, 648G, 690B, 690C, 693B, 700A, 740, 740A, 740E, 740G, 743, 743A, 744E, 748E, 748G, 760, 760A, 762A, 762B, 770A, 770B, 772A, 772B, 790, 792, 844, 850, 855, 860B, 862, 890, 892ELC< li>
  • Replaces John Deere OEM number A4827R< li> < UL> (Part No: 109412)
$2.30
Engine Gasket Overhaul Set with Seals - Gas - For 3020 with a 241 CID Gas engine with serial number 123000 and up. (Part No: 351249)$240.98
Engine Gasket Set - Gasket set, complete - For JD 6650, 6610, 6615, 6715, 7210, 6405, 7410, 7420, 7500, 7510, 7610 model tractors. With 6.8T Diesel Power tech Engine (Part No: TP-RE501456)		$444.86
Exhaust Manifold Gasket -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7600, 7700, 7710 (s n 090000-later), 7720, 7800, 7810 (s n 090000-later), 7820, 7920, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9120, 9220, 9320, 9420, 9520, 9620< li>
  • Compatible with John Deere Combine(s) 9560 STS, 9650 STS, 9660 STS, 9750 STS, 9760 STS< li>
  • Compatible with John Deere Harvester(s) 3510 (s n 060036-earlier)< li>
  • Compatible with John Deere Construction & industrial models 540E, 540G (s n 565684-earlier), 548E, 548G (s n 565684-earlier), 560D (s n 604613-earlier), 640E, 640G (s n 565684-earlier), 644E, 644ER, 648E, 648G (s n 565684-earlier), 740E, 740G (s n 565684-earlier), 748E, 748G (s n 565684-earlier), 770D, 772D, 790D, 870D, 872D< li>
  • Replaces John Deere OEM number R521437, R527176, R26360, R44373< li> < UL> (Part No: 112369)
$3.46
Exhaust Manifold Gasket Set -
  • For John Deere tractor models 4000, 4010, 4020, 4230< li>
  • Replaces John Deere OEM number R83020, R83021< li> < UL> (Part No: 101605)
$45.50
Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Part No: 176661)		$12.70
Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Part No: 176661)		$12.70
Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Part No: 176661)		$12.70
Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516. (Part No: 176661)		$12.70
Front Cover Gasket - For tractor models 850, 950, 1050. (Part No: CH12819)$21.86
Front Cover Gasket - For tractor models 650, 750. (Part No: CH15386)$30.09
Front Crank Seal - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: 106851)$12.60
Front Crank Seal, Diesel - Front seal. Fits 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1032, 1042, 1052, 1055, 1065, 1068H, 1020, 3300, 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, 710D, 350, 350B, 350C, 350D, 350D, 355D, 355D, 400G, 450, 450B. Replaces: AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 450C, 450D, 450E, 450G, 455D, 455E, 455G, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 650G, 655, 655B, 750, 750B, 750C, 755, 755A, 755B, 890, 5030, 190E, 290D, 490, 490D, 490E, 495D, 590D, 595, 595D, 690D, 690DR, 690ELC, 70, 70D, 790ELC, 340D, 440, 440A, 440B, 440C, 440D, 448D, 540, 540A, 540B, 540D. AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 540E, 540G, 548D, 548E, 640, 640D, 640E, 640G, 648D, 648E, 648G, 740E, 748E, 570, 570A, 570B, 670, 670A, 670B, 672A, 672B, 240, 250, 260, 320, 4400, 4500, 344E, 344G, 444, 444C, 444CH, 444D, 444E, 444G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 624E, 624G, 6000, 6100, 6500, 6600, 1030, 1030OU, 1030VU. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1035EF, 1040, 1040V, 1120, 1130, 1140, 1140F, 1140V, 1350, 1445F, 1520, 1530, 1550, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1640, 1640F, 1745F, 1750V, 1830, 1840, 1840F, 1850, 1850F, 1850N, 1850V, 1950, 1950F, 1950N, 2020, 2030, 2030OU, 2035, 2035EF, 2040, 2040F, 2040S, 2120, 2130, 2135, 2140. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 2150, 2155, 2240, 2250, 2250F, 2255, 2345F, 2350, 2355, 2355N, 2440, 2450, 2450F, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650F, 2650N, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3155, 3200, 3200X, 3210, 3210X, 3255, 3300X. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 3310, 3310X, 3340, 3350, 3400, 3400X, 3410, 3640, 3640S, 3650, 4030, 4040, 4040S, 4050, 4120, 5036C, 5038D, 5041C, 5042D, 5045B, 5045D, 5045E, 5045U, 5047D, 5050D, 5055B, 5055B, 5055D, 5055D, 5055E, 5055U, 5060E, 5065E, 5065M, 5065U, 5075E, 5075M, 5075U, 5103, 5103E, 5103S, 5104, 5105, 5200, 5203. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 5204, 5205, 5210, 5215, 5215F, 5215V, 5220, 5225, 5300, 5300N, 5303, 5303M, 5310, 5310N, 5310S, 5315, 5315F, 5315V, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5410N, 5415, 5420, 5420N, 5425, 5425N, 5500, 5503, 5510, 5510N, 5515, 5520, 5520N, 5525, 5525N, 5600, 5610, 5615F, 5615V, 5700, 6100. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 6200, 6200, 6200L, 6200L, 6300, 6300L, 6400, 6400L, 6400SP, 6500, 6500L, 6506, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 820, 830, 840, 920, 930, 930VU, 940, 940VU, SE6100, SE6200, SE6300, SE640, 500, 555, 750, 800, 850, 900, 950, 855, 950, 1072, 1075, 1075HY, 1085, 1133, 1144, 1155, 1157, 1158. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 1165, 1166, 950, 693D, 895, 484, 7440, 7445, 7450, 9900, 9910, 9920, 993, 5420, 2270, 2280, 2320, 2360, 2420, 3430, 3830, 244J, 304J, 324, 3029, 3164, 3179, 4024, 4039, 4039, 4045, 4219, 4239D, 4239T, 4276, 6059, 6068, 6329, 6359T, 6414. Replaces AR67942, AT21608 (Part No: 106849)		$8.20
Front Crankshaft Seal - This front crankshaft seal has a 1.125 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.250 inch wide. It Fits: L, LA, LI, M, MC, MI, MT, MTN, MTW, 320, 330, 40, 420, 430, 440. Replaces: AL2122T, AL2653T, AR608R (Part No: 106846)		$14.26
Full Gasket Set - Complete engine gasket set. For model G from SN# 1000 to 7099. Comes with Lead Washers. (Part No: FS1075)$153.80
Full Gasket Set - For model H. Comes with 1 Washer for oil lead stud. (Part No: 184217)		$185.30
Full Gasket Set - Complete engine gasket set. For model B serial number 60000 to 95999. Comes with Lead Washers. The head gasket in this kit is metal with a fiber core. (Part No: 183815)$216.19
Full Gasket Set - Complete engine gasket set. For model D SN# 30400 to 109943. Comes with Lead Washers. (Part No: 179856)$330.00
Full Gasket Set - For two cylinder Models: 620, 630. (Part No: 178992)$315.00
Full Gasket Set - For tractor models: 720, 730 gas. (Part No: FS2703)$281.73
Full Gasket Set - This is a Full Gasket Set with seals for John Deere 2010 Ag Tractor with 165 Diesel Engine. This Gasket set is not complete for a crawler; Water pump gasket, o-rings, and possibly other gaskets are not the same. (Part No: 106929)		$405.00
Full Gasket Set - This is a Full Gasket Set without crankshaft seals. It includes Sealing Washers. Note: Narrow side of the fire ring (crimp) of the head gasket goes toward the cylinder head. It is used on 2 cylinder 80, 820, 830, 840. Replaces: AR1419R, AR1889R, RE524137 (Part No: 185034)		$386.06
Full Gasket Set -
  • For John Deere tractor model 60 (1953-1955)< li>
  • Compatible with John Deere Engine(s) 321 (Gas)< li>
  • Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included)< li> < UL> (Part No: 106924)
$315.00
Full Gasket Set -
  • For John Deere tractor model 70 (1953-1955)< li>
  • Compatible with John Deere Engine(s) 380 (Gas, 2 cylinder)< li> < UL> (Part No: 106925)
$310.00
Full Gasket Set -
  • For John Deere tractor models 2020, 2510< li>
  • Replaces John Deere OEM number RE501570< li>
  • Engines: 202 Diesel< li>
  • Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included)< li> < UL> (Part No: 106932)
$110.00
Full Gasket Set -
  • For John Deere tractor models 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 340, 344, 410, 440, 440C, 450, 455, 490, 493, 510< li>
  • Replaces John Deere OEM number RE525071, RE16934, RE501586, RE38599< li>
  • Engines: 276, 4045D Diesel< li>
  • Crankshaft Seals Not Included< li> < UL> (Part No: 106934)
$133.00
Full Gasket Set -
  • For John Deere tractor models 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4050< li>
  • Compatible with John Deere Construction & industrial models 444, 444D, 540, 544, 548, 548E, 570, 710, 710D< li>
  • Replaces John Deere OEM number RE501580< li>
  • Engine: 359 Diesel< li>
  • Oil pan gasket not included< li>
  • For oil pan gasket use Item #: 106913< li> < UL> (Part No: 106936)
$131.30
Full Gasket Set -
  • For John Deere tractor model 3020 (s n 123000-later)< li>
  • Compatible with John Deere Construction & industrial model 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR53035< li>
  • Engine: 270 Diesel< li> < UL> (Part No: 106938)
$98.00
Full Gasket Set -
  • For John Deere tractor models 4010, 4020 (s n 215, 000-earlier)< li>
  • Replaces John Deere OEM number AR53626< li>
  • Engine: 381, 404 Diesel< li>
  • Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included)< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 106939)
$104.90
Full Gasket Set -
  • For John Deere tractor models 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Compatible with John Deere Engine(s) 404 (Diesel)< li>
  • Replaces John Deere OEM number AR63938, RE524107< li>
  • Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included)< li> < UL> (Part No: 106941)
$111.40
Full Gasket Set -
  • For John Deere tractor models 4050 (s n 6592-earlier), 4240, 4250, 4440, 4450< li>
  • Compatible with John Deere Combine(s) 6620 (s n 335846 - later)< li>
  • Replaces John Deere OEM number RG27872, AR100638, AR87750, RE524395< li>
  • Engine: D466 Diesel< li>
  • Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included)< li> < UL> (Part No: 106942)
$213.00
Full Gasket Set -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 700, 760< li>
  • Replaces John Deere OEM number AR53614< li>
  • Engine: 531D< li> < UL> (Part No: 106947)
$300.00
Full Gasket Set -
  • For John Deere tractor models 5410, 5415, 5420, 5510, 5520, 5615, 5715, 6110, 6120, 6210, 6220, 6310, 6320, 6405, 6410, 6420, 6510< li>
  • Compatible with John Deere Construction & industrial models 110, 120, 160, 210, 270, 310E, 310SE, 315, 315SE, 410E, 410G, 444H, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number RE501455< li>
  • Engine: 4045D, 4045T Diesel< li>
  • Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included)< li> < UL> (Part No: 106948)
$145.40
Full Gasket Set -
  • For John Deere tractor model 7600< li>
  • Compatible with John Deere Harvester(s) 7400< li>
  • Replaces John Deere OEM number RE501584< li>
  • Engine: 6068T Diesel< li> < UL> (Part No: 106951)
$747.21
Full Gasket Set -
  • For John Deere tractor models 8630, 8640, 8650, 8760< li>
  • Replaces John Deere OEM number RE37416< li>
  • Engine: 619T Diesel< li> < UL> (Part No: 106954)
$225.00
Full Gasket Set -
  • For John Deere tractor models 8770, 8870< li>
  • Replaces John Deere OEM number RE56492< li>
  • Engine: 6101T< li> < UL> (Part No: 106955)
$530.00
Full Gasket Set - For 70 with Gas Engine. Full Gasket Set includes timing cover and rear main seals. (Part No: FS3049)		$293.40
Full Gasket Set - For M, 40, 320, 330. Full Gasket Set with crankshaft seals. (R) $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106922)		$87.00
Full Gasket Set - Full Gasket set for 2 cylinder gas engine with 4 1 4 inch bore in models 420, 430, 440. Full Gasket Set, with rear main seal, LESS TIMING COVER SEAL ON 440 which can be ordered separately number 46289. $8 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106926)$100.00
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 1420, 1520, 1530, 2040, 2330 with 164 Diesel Engine (Part No: R-RE50978)$133.25
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Part No: R-RE50978)$133.25
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2355N, 5400, 5500 with 179 or 3029 Turbo Diesel Engine (Part No: R-RE50978)$133.25
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2020, 2510 with 202 Diesel Engine (Part No: R-RE38558)		$116.33
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2030, 2270, 2280, 2320, 2420, 2440, 2520, 2530 with 219 Diesel Engine (Part No: R-RE38857)$130.46
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2350, 2355, 2550, 2555 with 239 or 4039 Diesel Engine (Part No: R-RE38857)$130.46
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2750, 2755, 2850, 2855 with 239 or 4039 Turbo Diesel Engine (Part No: R-RE38857)$130.46
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 3010, 3020 with 270 Diesel Engine (To Eng S#280000). (Part No: R-AR53033)$133.46
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-AR53035)$132.54
Full Gasket Set - With Rear Main Seal & Timing Cover Seal. For tractor models 2630, 2640 with 276 Diesel Engine. (Part No: R-RE37715)$122.13
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 6400, 6410, 6500, 6510, 6700 with 276 or 4045 Turbo Diesel Engine (Part No: R-RE37715)$122.13
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine (Part No: 106935)$172.00
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2940, 2950, 2955, 3150, 3155 with 359 or 6059 Diesel Engine (Part No: R-RE38858)$180.54
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4040, 4050, 6600, 7200 with 359 or 6059 Turbo Diesel Engine (Part No: R-RE38858)$180.54
Full Gasket Set - With Rear Main Seal & Timing Cover Seal. For tractor models 4010, 4020 with 404 Diesel Engine (To Eng S#214999). (Part No: R-AR53626)$153.60
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Part No: 106940)$114.80
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4040, 4230 with 404 Diesel Engine (From Eng S#335846) (Part No: R-AR63938)$185.56
Full Gasket Set - Without Crankshaft Seals. For 4320, 4520, 4620 with 404T, A Diesel Engine (To Eng S#335845) (Part No: 106943)		$201.00
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4320, 4430, 4630 with 404T, A DieselEngine (From Eng S#335846)REF ID R-AR63269 (Part No: 106944)$170.50
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 6800, 6900, 7210, 7400, 7410, 7600 with 414 or 6068 Turbo Diesel Engine (Part No: R-RE38555)$126.92
Full Gasket Set - With Rear Main Seal & Timing Cover Seal. For tractor models 4050, 4240 with 466 Diesel Engine. (Part No: R-AR100638)$190.80
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4755, 4760, 4955, 4960 with 6076Diesel Engine (To Eng S#499999) (Part No: R-RE35647)$218.06
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4055, 4255, 4455, 4555, 4560, 4755, 4760, 7700, 7800, 8100, 8200, 8560, 8570 with 6076 Diesel Engine (From Eng S#500000) Replaces RE42151, RE524640, RE64206, RG27881 (Part No: 106946)		$260.00
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 5010, 5020, 6030 with 531 Diesel Engine (Part No: R-AR53614)$280.67
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 6030, 7520 with 531A Diesel Engine (Part No: R-RE17046)$297.68
Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 8630, 8640, 8650 with 619 Diesel Engine (Part No: R-RE37416)$237.44
Full Gasket Set with Crankshaft Seals - Contains the following gaskets and seals; Carb to manifold A4631R, Carb to intake A4634R, Intake manifold A4642R, Manifold AB5504R, Vent pipe B60R, 2 Valve cover washers B425R, Valve cover B3722R, Water inlet B3754R, Water outlet B3565R, Block to crankcase B3742R, Cylinder head B3743R, Cylinder head washers B369R, Sediment bowl C1778R, Water pipe F1056R, Vent outlet pipe R495R, Air cleaner R20039R, Flywheel cover A3311R, Drive shaft outer bearing cover A3817R, Main bearing oil hole A4847R, Main bearing cover B3030R, Main bearing housing B3735R, Main bearing housing B3734R, Main bearing seal AB5160R, Brake housing B2743R, Flywheel spacer B3028R, Reduction gear cover B3084R, Dust shield B3122R, Clutch fork bearing B3467R, Clutch fork bearing B3980R, 3 Camshaft left bearing shims B3982R, Distributor mounting F2632R, Flywheel cover packing strip F2728R, Governor housing B2655R, Governor side cover B3593R, Ring and cylinder set AB5363R, RE540377, Crankshaft and bearing set AB5364R (Part No: 184621)		$270.60
Gasket Engine Bottom Set - For 290 Early with 4 ring piston, with A4-248 Direct Injection Perkins Engine. Engine Bottom Gasket Set. Does not include Crankshaft Seals. Use with Top Set part number 747169M91. (Part No: 166982)$40.50
Gasket Engine Bottom Set - For (1100 with A6-354 Non Turbo-Charged Perkins Diesel), (1130 with AT6-354 Turbo-Charged Perkins Diesel with engine SN# prior to 354UA3356T, all. Bottom Engine Gasket Set includes the 2 piece rope type rear seal. (Part No: CS5020)$63.29
Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1 4 standard bore 4 ring piston. For 4010, 4020 (Part No: FS3214)$214.45
Gasket Set - Overhaul GASKET SET. For tractor models 4010, 4020. Both using 301 cu in. GAS engine. (Part No: FS3214W)$125.00
Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1 4 standard bore, 3 ring piston. For 3020 (Part No: FS3221)$202.78
Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 820, 830, and 1020 diesel, 3 cylinder 152 CID. (Part No: FS3356W)$109.71
Gasket Set - For tractor models 1520, 1530, 2040, 2150, 2240, 2255. (Part No: FS3506W)$107.03
Gasket Set - For tractor models 4320, 4520, 4620, 7020. (Part No: FS3849W)$284.46
Gasket Set - For tractor models 4430, 4630, 7020. (Part No: FS3849Y)$250.76
Gasket Set - Complete gasket set with crankshaft seals and sleeves(where required). 1 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 4040, 4230 (Part No: FS3887)$175.55
Gasket Set - For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: FS3898)$476.02
Gasket Set - For tractor models 2030, 2350, 2355, 2440, 2520, 2550, 2555, 2750, 2755. (Part No: 106933)$78.60
Gasket Set - For tractor models 2840, 4030. (Part No: FS3901)$249.34
Gasket Set - For tractor models 4000, 4020. (Part No: 106940)$114.80
Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required). 1 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: FS4276)$179.12
Gasket Set, 135 Gas - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 1020. To engine SN# 162079 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: FS3356)$267.26
Gasket Set, Complete, 152 Diesel - With Rear Main Seal & Timing Cover Seal For 301A, 820, 830, 1020, 1030 with 152 Diesel Engine. (Part No: 106928)$79.50
Gasket Set, Overhaul with Seals - Gasket Set, Overhaul with Seals. For model : 1010 Gas (Part No: 184543)		$301.47
Half Split Rear Gasket -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4640, 4650, 4840, 4850, 8440, 8560, 8640, 8760, 8960< li>
  • Compatible with John Deere Engine(s) 6076, 6076A, 6076T, 6466A, 6466D< li>
  • Replaces John Deere OEM number R90249 < li> < UL> (Part No: 169739)
$7.63
Head Gasket - For model 770. (Part No: M805831)$78.77
Head Gasket - For tractor models 855, 856. (Part No: 186048)$72.24
Head Gasket - For tractor models 870, 955. (Part No: M805837)$89.28
Head Gasket - For 2 cylinder 650. Head Gasket for 2T80UJ engine. Replaces M802217 and MIU10631. (Part No: 126769)$77.91
Head Gasket - For 850, 900HC. Head Gasket - 3 Cylinder. (Part No: 126767)		$59.64
Head Gasket -
  • For John Deere tractor models 3140, 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6210, 6310, 6405, 6410, 6605, 6610< li>
  • Compatible with John Deere Construction & industrial models 120, 210, 230, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 550, 555, 650< li>
  • Replaces John Deere OEM number R116515< li>
  • Engine: PowerTech 4.5L 4045D< li> < UL> (Part No: 123936)
$27.90
Head Gasket -
  • For John Deere tractor models 2840 (s n 277549-later), 2940, 2950, 2955, 3050, 3120 (s n 277548-earlier), 3130 (s n 277549-later), 3140, 3150, 3155, 3255, 3350, 3530 (s n 277549-later), 3540, 3550, 4020 (s n 277548-earlier), 4030, 4050 (s n 277548-earlier), 4530 (s n 277548-earlier), 6800, 6900, 7200, 7210, 7400, 7410, 7600, 7700, 7800< li>
  • Compatible with John Deere Combine(s) 4400 (s n 277549-later), 4420 (s n 277548-earlier), 4425 (s n 277549-later), 9400< li>
  • Compatible with John Deere Harvester(s) 499, 699 (s n 277548-earlier), 7440, 7445, 9900, 9910, 9920, 9930< li>
  • Compatible with John Deere Construction & industrial models 444 (s n 277549-later), 444C (s n 277549-later), 444CH (s n 277549-later), 444D (s n 277549-later), 540A (s n 277548-earlier), 544A, 544B, 544C, 544D, 544E, 544E-H, 544G, 570A, 570B, 624E, 640, 640D, 643, 643D, 644E, 648D, 653, 655, 655B, 670, 670A, 670B, 672, 672A, 672B, 690D, 693D, 710B (s n 277549-later), 710C, 750, 750B, 755, 755A, 755B, 790ELC< li>
  • Compatible with John Deere Engine(s) 6068D, 6329D, 6359D, 6359T, 6359DT< li>
  • Replaces John Deere OEM number R92426, R114157, R59449, R80243, R91880, T20472< li> < UL> (Part No: 158350)
$37.60
Head Gasket -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8430 (1974-1981), 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Combine(s) CTS, CTS (670101-674000), 1177, 1177H4, 1188, 1188H4, 2054 (Europe Edition), 2056 (Europe Edition), 2058 (Europe Edition), 2064 (Europe Edition), 2066 (Europe Edition), 6620, 6622, 7720, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 5720 (Self-Propelled), 5730 (Self-Propelled), 5820 (Self-Propelled), 5830 (Self-Propelled), 6610 (Self-Propelled), 6710 (Self-Propelled), 6810 (Self-Propelled), 6910 (Self-Propelled), 9960 (Self-Propelled), 9965 (Self-Propelled), 9970 (Self-Propelled)< li>
  • Compatible with John Deere Construction & industrial models 540E, 548E, 640E, 644C, 644D, 644E, 644ER, 644G, 646C, 648E, 653E, 690C, 690CR, 693C, 740A, 740E, 743, 743A, 748E, 750C (s n 883331-earlier), 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B, 850C (s n 883331-earlier), 892ELC< li>
  • Replaces John Deere OEM number RE47336< li>
  • Thickness: .087"< li> < UL> (Part No: 158354)
$79.40
Head Gasket -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L< li>
  • Replaces John Deere OEM number R515274< li>
  • Head Gasket< li> < UL> (Part No: 158474)
$104.00
Head Gasket -
  • For John Deere tractor models 4010, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Compatible with John Deere Engine(s) 6404D (s n 214999-earlier)< li>
  • Replaces John Deere OEM number R45615, R34311, R40974< li>
  • Replaces Block Casting number R26070, R33180, R34340, R40890, R40900, R40930< li>
  • Engine Bore: 4.25"< li> < UL> (Part No: 160766)
$57.00
Head Gasket -
  • For John Deere tractor models 3010 (s n 49999-earlier), 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A (s n 123113-earlier)< li>
  • Compatible with John Deere Engine(s) 270 (diesel, s n 279999-earlier)< li>
  • Replaces John Deere OEM number R45616, R26209, R34312, R40943, R41988< li>
  • Replaces Block Casting number R46350, R46430, R40910, R26160, R32020, R40850< li>
  • Engine Bore: 4.25"< li> < UL> (Part No: 160767)
$45.00
Head Gasket -
  • For John Deere tractor model 3020< li>
  • Compatible with John Deere Construction & industrial model 500A, 500B, 500C, 510< li>
  • Replaces John Deere OEM number RE570486, R41608< li> < UL> (Part No: 167566)
$71.00
Head Gasket -
  • For John Deere tractor models 820 (3 Cylinder), 830 (3 Cylinder, s n 154766-later with 3.152D Engine), 1020, 1030< li>
  • Compatible with John Deere Construction & industrial models 300, 300A, 300B (s n 154766-later with 3.152 Engine), 301A (s n 154766-later with 3.152 Engine), 350, 350A, 350B, 380< li>
  • Replaces John Deere OEM number R98460, R52789< li> < UL> (Part No: 174050)
$12.00
Head Gasket -
  • For John Deere tractor models A (1940-1953, s n 584000-later), AO (1940-1953, s n 272000-later), AR (1940-1953, s n 272000-later)< li>
  • Compatible with John Deere Engine(s) 321< li>
  • Replaces John Deere OEM number A2329R, A6120R< li>
  • Has one metal side< li>
  • 1940-1953< li> < UL> (Part No: 174639)
$47.00
Head Gasket Set - Fits 115 CID 4-cylnder gas engines on 1010. (Part No: 106879)		$189.00
Head Gasket Set - Upper Engine Gasket Set for models 2010, 40, and 45 all with 165 CID Diesel engine. (Part No: 106880)		$178.60
Head Gasket Set - For Diesel model 1010. (Part No: 106874)$177.95
Head Gasket Set - To serial number 487999. Upper Gasket Set. For tractor models A, AO, AR. Comes with Lead Washers. (Part No: 183861)		$162.50
Head Gasket Set - For model 1520 with 3-cylinder gas engine. (Part No: 106877)		$178.00
Head Gasket Set - For tractor models: 720, 730 gas. (Part No: HS2703)$202.00
Head Gasket Set - Containing the gaskets need to remove and reinstall the head, this gasket set is for John Deere G, serial number 7100 and up. (Part No: 184620)		$167.67
Head Gasket Set -
  • For John Deere tractor model 50 (s n 5000000-later)< li>
  • Compatible with John Deere Engine(s) 190 (Gas)< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 106867)
$181.00
Head Gasket Set -
  • For John Deere tractor model 60< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • Replaces John Deere OEM number AA7421R< li>
  • Contains all gaskets necessary to replace the cylinder head (valve seals not included)< li> < UL> (Part No: 106868)
$160.00
Head Gasket Set -
  • For John Deere tractor model 70 (1953-1955)< li>
  • Compatible with John Deere Engine(s) 380 (gas)< li>
  • Replaces John Deere OEM number RE524083< li>
  • Contains all gaskets necessary to replace the cylinder head (valve seals not included)< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 106869)
$179.00
Head Gasket Set -
  • For John Deere tractor model 2030< li>
  • Compatible with John Deere Engine(s) 219 (Gas)< li>
  • Replaces John Deere OEM number RE38566< li>
  • Contains all gaskets necessary to replace the cylinder head (valve seals not included)< li> < UL> (Part No: 106883)
$119.00
Head Gasket Set -
  • For John Deere tractor models 4000, 4020 (s n 201000-later)< li>
  • Compatible with John Deere Engine(s) 362 (gas)< li>
  • Replaces John Deere OEM number RE524100< li> < UL> (Part No: 106890)
$385.00
Head Gasket Set -
  • For John Deere tractor models 4000, 4020 (s n 215000-later)< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Replaces John Deere OEM number AR53630< li>
  • Engine: D404 Diesel< li>
  • Contains all gaskets necessary to replace the cylinder head (valve seals not included)< li> < UL> (Part No: 106892)
$74.00
Head Gasket Set -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7800, 8100 (s n 9999-eariler), 8200 (s n 9999-eariler), 8300 (s n 9999-eariler), 8560, 8570< li>
  • Compatible with John Deere Harvester(s) 7800< li>
  • Compatible with John Deere Construction & industrial models 540E, 548E, 640E, 644E, 644ER, 644G, 648E, 740E, 748E, 770B, 770BH, 772B, 772BH, 892ELC< li>
  • Compatible with John Deere Engine(s) 6076A (diesel), 6076T (diesel)< li>
  • Replaces John Deere OEM number RG27884, RE29859, RE29859G, RE526730, RE58471, RG22248< li>
  • Contains all gaskets necessary to replace the cylinder head (valve seals not included)< li> < UL> (Part No: 106898)
$132.00
Head Gasket Set -
  • For John Deere tractor models 5010, 5020, 6030 (non-turbo)< li>
  • Compatible with John Deere Construction & industrial models 700, 700A, 760, 760A< li>
  • Replaces John Deere OEM number RE524094, AR53613 < li>
  • Engine: 6531D< li>
  • Contains all gaskets necessary to replace the cylinder head (valve seals not included)< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 106899)
$164.00
Head Gasket Set -
  • For John Deere tractor models 6030 (Turbo), 7520< li>
  • Compatible with John Deere Construction & industrial models 644B, 770< li>
  • Compatible with John Deere Engine(s) 6531A< li>
  • Replaces John Deere OEM number AR56154< li> < UL> (Part No: 106900)
$161.00
Head Gasket Set -
  • For John Deere tractor models 8630, 8640, 8650, 8760 (s n 500000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 762, 850, 855, 860, 860B, 862, 862B, 890, 890A, 992< li>
  • Replaces John Deere OEM number RE37417< li>
  • Engines 619T Diesel, 6101T Diesel < li> < UL> (Part No: 106903)
$149.00
Head Gasket Set -
  • For John Deere tractor models 8770, 8870< li>
  • Replaces John Deere OEM number RE56491< li>
  • Engine: 6101T Diesel< li> < UL> (Part No: 106904)
$279.90
Head Gasket Set -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6210, 6310, 6405, 6410, 6410L, 6410S, 6510, 6605, 6610< li>
  • Compatible with John Deere Construction & industrial models 120, 210, 230, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 550, 555, 650< li>
  • Replaces John Deere OEM number RE66082< li>
  • Engine: PowerTech 4.5L 4045D < li> < UL> (Part No: 123935)
$62.00
Head Gasket Set - For model 70 with Gas Engine. This set contains all the gaskets needed for replacing the cylinder head. Replaces AF1682R, AR21787, RE524083, RE526777 (Part No: 187274)		$183.84
Head Gasket Set - For 420, 430, 440. Head Gasket Set. Replaces AM2848T, AM3189T, F2632R, M3066T, M3109T, M3219T, M3993T, M3994T, RE525796, T379T (Part No: 106870)		$53.00
Head Gasket Set - For tractor models M, 40, 320, 330. Head Gasket Set. For 2 cylinder. Replaces RE527354, AM808T, RE38550 (Part No: 106866)		$76.60
Head Gasket Set - For 520, 530. (Part No: 106871)$148.90
Head Gasket Set - For tractor models 620, 630. (Part No: 106872)		$172.00
Head Gasket Set - For 1420, 1520, 1530, 2040, 2330 with 164 Diesel Engine (Part No: 123875)$39.26
Head Gasket Set - For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Part No: 123875)$39.26
Head Gasket Set - For 2355N, 5400, 5500 with 179 or 3029 Turbo Diesel Engine (Part No: 123875)$39.26
Head Gasket Set - For 2020, 2510 with 180 Gas Engine (Part No: 106881)$76.80
Head Gasket Set - For 3010 with 201 Gas Engine (Part No: 106886)$78.90
Head Gasket Set - For 2020, 2510 with 202 Diesel Engine (Part No: 106882)$76.00
Head Gasket Set - For 2520 with 202 Gas Engine (Part No: 106881)$76.80
Head Gasket Set - For 2030, 2270, 2280, 2320, 2420, 2440, 2520, 2530 with 219 Diesel Engine (Part No: 106884)		$52.00
Head Gasket Set - For 3020 (To S#122999) with 227 Gas Engine (Part No: 106886)$78.90
Head Gasket Set - For 2350, 2355, 2550, 2555 with 239 or 4039 Diesel Engine (Part No: 106884)		$52.00
Head Gasket Set - For 2750, 2755, 2850, 2855 with 239 or 4039 Turbo Diesel Engine (Part No: 106884)$52.00
Head Gasket Set - For 3010, 3020 with 270 Diesel Engine (To Eng S#280000). $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106887)		$68.00
Head Gasket Set - For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-AR53034)$76.15
Head Gasket Set - For 2630, 2640 with 276 Diesel Engine (Part No: 106884)		$52.00
Head Gasket Set - For 6400, 6410, 6500, 6510, 6700 with 276 or 4045 Turbo Diesel Engine (Part No: 106884)		$52.00
Head Gasket Set - For 4010 with 301 Gas Engine. Replaces AR53623, RE524096. $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106889)		$101.90
Head Gasket Set - For tractor models 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine. (Part No: 106885)		$77.90
Head Gasket Set - For 4020 (To S#200999) with 341 Gas Engine. $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. Replaces AR53623, RE524096 (Part No: 106889)		$101.90
Head Gasket Set - For tractor models 2940, 2950, 2955, 3150, 3155 with 359 or 6059 Diesel Engine. (Part No: 106885)		$77.90
Head Gasket Set - For tractor models 4040, 4050, 6600, 7200 with 359 or 6059 Turbo Diesel Engine. (Part No: 106885)		$77.90
Head Gasket Set - For 4000, 4020 (From S#201000) with 362 Gas Engine (Part No: HS3846)$103.47
Head Gasket Set - For tractor models 4010, 4020 with 404 Diesel Engine (To Eng S#214999). $15 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106891)		$65.90
Head Gasket Set - For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Part No: R-AR53630)$101.20
Head Gasket Set - For 4040, 4230 with 404 Diesel Engine (From Eng S#335846) (Part No: R-AR63940)$73.14
Head Gasket Set - For tractor models 4320, 4430, 4520, 4620, 4630 with 404T, 7020 A Diesel Engine. (Part No: 106896)$88.60
Head Gasket Set - For tractor models 6800, 6900, 7210, 7400, 7410, 7600 with 414 or 6068 Turbo Diesel Engine. (Part No: 106885)		$77.90
Head Gasket Set - For 4050, 4240 with 466 Diesel Engine (Part No: 106895)$128.00
Head Gasket Set - For 4250, 4440, 4450, 4640, 4650, 4840, 4850 with 466T, A Diesel Engine (Part No: R-AR98851)$121.05
Head Gasket Set - For tractor models 4755, 4760, 4955, 4960 with 6076Diesel Engine (To Eng S#499999). (Part No: R-RE29859)$145.51
Head Gasket Set - For 4055, 4255, 4455, 4555, 4560, 4755, 4760 with 6076 Diesel Engine (From Eng S#500000) (Part No: R-RG22248)$170.68
Head Gasket Set - For 5010, 5020, 6030 with 531 Diesel Engine (Part No: R-AR53613)$141.44
Head Gasket Set - For tractor models 6030, 7520 with 531A Diesel Engine. (Part No: R-AR56154)$136.15
Head Gasket Set - For tractor models 8630, 8640, 8650 with 619 Diesel Engine. (Part No: R-RE37417)$145.30
Head Gasket Set, 135 Gas - For 1020 with 135 CID Gas Engine. Replaces RE38563 (Part No: 106875)		$99.00
Head Gasket Set, 152 Diesel - For 820, 830, 1020, 1030 with 152 CID Diesel Engine. (3 Cylinder)R-RE38848 (Part No: 106876)$65.00
Intake Manifold Gasket -
  • For John Deere tractor models 4050, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430 (1974-1981), 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600, 6601, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5820, 5830, 9940, 9950< li>
  • Replaces John Deere OEM number R50397< li>
  • Sold Each, Order 3 for manifold< li> < UL> (Part No: 112235)
$4.10
Intake Manifold Gasket -
  • For John Deere tractor models 4050, 4055, 4240, 4430 (Engine s n 512306 - later), 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (Engine s n 512306 - later), 7710 (Engine s n 512306 - later), 7720 (Engine s n 512306 - later), 7810 (Engine s n 512306 - later), 7820 (Engine s n 512306 - later), 7920 (Engine s n 512306 - later), 8120 (Engine s n 512306 - later), 8120T (Engine s n 512306 - later), 8220 (Engine s n 512306 - later), 8220T (Engine s n 512306 - later), 8320 (Engine s n 512306 - later), 8320T (Engine s n 512306 - later), 8420 (Engine s n 512306 - later), 8420T (Engine s n 512306 - later), 8430 (Model Year 1974- '81), 8440 (Engine s n 512306 - later), 8450 (Engine s n 512306 - later), 8520 (Engine s n 512306 - later), 8520T (Engine s n 512306 - later), 8560 (Engine s n 512306 - later), 8570 (Engine s n 512306 - later), 8640 (Engine s n 512306 - later), 9100 (Engine s n 512306 - later), 9120 (Engine s n 512306 - later), 9220 (Engine s n 512306 - later), 9230 (Engine s n 512306 - later), 9420 (Engine s n 512306 - later), 9520 (Engine s n 512306 - later), 9620 (Engine s n 512306 - later)< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 6620, 6622, 7720, 9500 (Engine s n 156457 - eailer), 9500 SH (Engine s n 156457 - eailer), 9510, 9510 SH, 9610, 9650, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9750 STS, 9760 STS< li>
  • Compatible with John Deere Harvester(s) 5200 (Engine s n 335846 - later), 5400, 5400 (Engine s n 335846 - later), 5720, 5730, 6610, 6650, 7200, 7300, 7400, 7500, 9970, 9976, 9986, 9996< li>
  • Compatible with John Deere Construction & industrial models 540E, 548E, 560D, 640E, 644C, 644E, 644G, 644H, 644J, 646C, 648E, 660D, 690B, 690C, 693B (Engine s n 512306 - later), 724J, 740A, 740E, 743A, 748E, 762A, 762B, 770A, 770AH, 770B, 770BH, 770C, 770CH, 772A, 772AH, 772CH, 790, 792, 848G, 850B, 850C, 850CII< li>
  • Replaces John Deere OEM number R130573, R87316, R102838< li> < UL> (Part No: 156691)
$5.00
Intake Manifold Gasket Set -
  • For John Deere tractor models 4000, 4010, 4020, 4230 (all gas tractors)< li>
  • Replaces John Deere OEM number R227403, R26296, R26499< li>
  • Kit includes: 3 manifold to cylinder head gaskets, 1 carburetor gasket, and 1 manifold to heat riser valve gasket< li> < UL> (Part No: 105501)
$26.76
Liner Sealing Ring Kit -
  • For John Deere tractor models 820, 830, 1020, 2020, 2510, 2520, 4030, 8630, 8640, 8650< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 350, 380, 400, 401, 440, 450, 480, 540, 544, 570< li>
  • Compatible with John Deere Engine(s) 135 (s n 162079-later), 152 (s n 154766-later), 202 (s n 157353-later)< li>
  • Replaces John Deere OEM number AR71617< li>
  • No o-ring grooves on sleeve< li>
  • 3 o-rings < li> < UL> (Part No: 128692)
$8.06
Liner Sealing Ring Kit -
  • For John Deere tractor models 3010, 3020, 4000, 4010 (s n 214999-earlier), 4020 (gas s n 214999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B (s n 280000-earlier), 600 (s n 214999-earlier)< li>
  • Compatible with John Deere Engine(s) 227, 6404D< li>
  • Replaces John Deere OEM number AR40155< li> < UL> (Part No: 158867)
$6.96
Liner Sealing Ring Kit -
  • For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2440, 2510, 2520, 2840, 3030, 3130, 3135, 4030< li>
  • Compatible with John Deere Combine(s) 925, 935, 945, 955, 3300, 4400, 4420, 6600< li>
  • Compatible with John Deere Harvester(s) 484< li>
  • Compatible with John Deere Construction & industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350B, 350C, 400, 401B, 401C, 401D, 410, 410B, 440, 440A, 440B, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 540, 540A, 544, 544A, 570, 570A, 710B, 710C< li>
  • Compatible with John Deere Engine(s) 164, 219, 329< li>
  • Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420< li>
  • Replaces John Deere OEM number AR71618< li> < UL> (Part No: 166432)
$2.06
Main Bearing Housing Gasket - For model 850. (Part No: CH10339)$9.89
Main Bearing Housing Gasket - For tractor models 950, 1050. (Part No: CH10445)$10.29
Main Bearing Housing Gasket - For tractor models 770, 855, 856, 870, 955, 970, 1070. (Part No: M801204)$10.68
Main Crankshaft Seal Front - For tractor models 1010, 1010 GAS, 145G SN# 30001>, 2010, 2010 GAS, 217G SN# 40001>, 2510, 2520, 3020, 340D, 4000, 4010, 4020, 4230, 4320, 440C, 440D, 448D, 4430, 4520, 4620, 500C, 5010, 5020, 510, 55 SN# 59282>, 7020, 95 SN# 51615>, 440, 440A, 440B, 500, 500 SN# <123113, 500A, 500B, 600, 700A, 760, 760A. Replaces (R35798) USED WITH 1000 RPM PTO. (Part No: 121742)		$10.60
Main Seal Rear - For tractor models 1010 GAS, 145G SN# 30001>, 2010 GAS, 217G SN# 40001>, 55 SN# 59282>, 95 SN# 51615>. (Part No: 106853)$16.30
Manifold Gasket - Manifold to head gasket. For model 850. 3 gaskets required. Price per each. (Part No: CH10142)$8.08
Manifold Gasket - Manifold to head gasket. For model 950. 3 required priced individually. (Part No: 184901)$10.36
Manifold Gasket -
  • For John Deere tractor models 420, 430, 440< li>
  • Replaces John Deere OEM number M3994T< li> < UL> (Part No: 101582)
$13.00
Manifold Gasket Set - For tractor models 1020, 1520, 300 all with 3 cylinder gas engine. (Part No: 109885)		$45.95
Manifold Gasket Set -
  • For John Deere tractor model A< li> < UL> (Part No: 101568)
$24.50
Manifold Gasket Set -
  • For John Deere tractor model 70 (gas)< li>
  • Replaces John Deere OEM number A4631R, A4642R, AF1688R, AF2608R, AF3724R, R524090< li> < UL> (Part No: 101595)
$25.50
Oil Filter Housing Gasket -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 8560, 8760, 8960< li>
  • Compatible with John Deere Combine(s) 7700< li>
  • Compatible with John Deere Construction & industrial models 540E, 540G, 548E, 548G, 640E, 640G, 644E, 644ER, 648E, 648G, 653E, 740E, 740G, 748E, 748G, 762B, 770B, 770BH, 772B, 772BH, 790D, 850B, 892DLC< li>
  • Replaces John Deere OEM number R520526< li> < UL> (Part No: 179482)
$2.50
Oil Pan Gasket - Pan gasket. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. For 3010, 3020 (Part No: 184606)		$20.50
Oil Pan Gasket - Oil pan gasket. 1 set used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 1 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870 only, to SN# 200999); 1 used in 381 CID 6 cylinder diesel engine; 1 used in 404 CID & 466 CID 6 cylinder diesel engines (turbocharged & naturally aspirated).For tractor models 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: 124046)		$14.76
Oil Pan Gasket - For tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755. (Part No: 106909)$16.50
Oil Pan Gasket - For tractor models 2840, 2940, 2950, 2955, 4030. (Part No: TP-R97344)$23.34
Oil Pan Gasket - For model 850. (Part No: CH12820)$17.93
Oil Pan Gasket - For tractor models 950, 1050. (Part No: 185254)$23.13
Oil Pan Gasket - For model 750. (Part No: M806944)$20.46
Oil Pan Gasket - This Oil Pan Gasket is used on John Deere; 1010 with 115 Gas or 145 Diesel, 2010 with 145 Gas or 165 Diesel Engine. Note, this gasket is used on CAST IRON pans only. Replaces original part numbers R98835, T15018 (Part No: 106906)		$18.80
Oil Pan Gasket -
  • For John Deere tractor models 4030, 4050< li>
  • Compatible with John Deere Construction & industrial models 444D, 540, 544, 548, 548E, 570, 710, 710D< li>
  • Replaces John Deere OEM number R97345< li>
  • Engines: 359 Diesel, 359T Diesel, 6059T Diesel< li>
  • Oil Pan Gasket Only< li> < UL> (Part No: 106913)
$15.50
Oil Pan Gasket -
  • For John Deere tractor models 2840, 2940, 2950, 2955 (s n 767516-earlier), 3030, 3040 (European edition), 3055, 3120, 3130, 3140 (European), 3150, 3155, 3640, 4030, 4040 (European), 4050 (s n 65921-earlier), 4230, 4240 (European), 4250, 4320, 4430, 4440 (European), 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6603, 6605 (s n 539441-earlier), 7020, 7200 (w oil pan R105549), 7220, 7320, 7400 (w oil pan R105549), 7500, 7600, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 955, 965, 975, 985, 4400, 4420, 9400< li>
  • Compatible with John Deere Harvester(s) 484, 7445, 7450, 9900, 9910, 9920, 9930< li>
  • Compatible with John Deere Construction & industrial models 444, 444C, 444D, 540, 540A, 540E, 544, 544A, 544B, 544D, 544E, 544G, 570, 570A, 570B, 600, 624E, 624G, 640, 640D, 640E, 643, 643D, 644, 644A, 644C, 644D, 646, 646B, 646C, 648D, 653E, 655, 655B, 670, 670A, 670B, 672A, 672B, 690, 690A, 690C, 690D, 690DR, 690ELC, 693D, 710B, 710C, 710D, 740, 740A, 740E, 743, 743A, 750, 750B, 755, 755A, 755B, 762A, 762B, 770A, 772A, 790, 790D, 790ELC, 792, 850B< li>
  • Replaces John Deere OEM number R56933, R97344, T20205, R61670, R57505< li>
  • Engines: 404D, 404T, 466D, 466T Diesel< li>
  • Oil Pan Gasket Only < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 106914)
$16.80
Oil Pan Gasket -
  • For John Deere tractor models 5010, 5020, 6030, 7520, 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830< li>
  • Compatible with John Deere Construction & industrial models 644B, 700, 700A, 760, 760A, 762, 770, 850, 855, 860, 862, 890, 992< li>
  • Replaces John Deere OEM number R71919, R61670, R57505, R520584< li> < UL> (Part No: 156875)
$17.76
Oil Pan Gasket -
  • For John Deere tractor models 7710 (s n 90000-later), 7810 (s n 90000-later), 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 9120< li>
  • Compatible with John Deere Combine(s) 9650, 9650 CTS, 9650 STS, 9750 STS< li>
  • Replaces John Deere OEM number R125855< li> < UL> (Part No: 158217)
$47.26
Oil Pan Gasket -
  • For John Deere tractor models 4430, 4455, 4560, 4760, 4960, 7700, 7710, 7800, 7810, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 8560, 8570, 9100< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9500 SH, 9510, 9510 SH, 9600, 9610, 9650, 9650 CTS, 9650 STS, 9750, 9750 STS< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 6610, 6650, 9940, 9950, 9960, 9965, 9970, 9976< li>
  • Compatible with John Deere Engine(s) 6076 (s n 499999-earlier), 6081, 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R49377, RE504822, R49376, R521228< li>
  • Used with Aluminum Oil Pan< li> < UL> (Part No: 158222)
$13.91
Oil Pan Gasket -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5460, 5830< li>
  • Compatible with John Deere Engine(s) 6101, 6619T< li>
  • Replaces John Deere OEM number RE509291, R64828< li>
  • Used with Aluminum Oil Pan< li> < UL> (Part No: 158225)
$86.00
Oil Pan Gasket -
  • For John Deere tractor models 5080R, 5090R, 5100R, 5105M, 5105ML, 6100D, 6110D, 6115D, 6125D, 6130, 6130D, 6140D, 6230, 6325, 6330, 6425, 6430, 6534< li>
  • Compatible with John Deere Construction & industrial models 120, 335D, 344J, 437D, 650J, 710J, 1010D (s n 3501-4000)< li>
  • Replaces John Deere OEM number R521493< li> < UL> (Part No: 164482)
$18.90
Oil Pan Gasket, Gas or Diesel - For tractor models 1020, 1520, 1530, 2040, 2150, 2240, 2255. (Part No: 106908)$14.26
Oil Pan Gasket Set - This Oil Pan Gasket Set is used on John Deere: 500 (Serial number below 280000 Early Power Booster 4.270 4CYL ENG), 500A, 500B, 500C (Serial number 280000 and up 4.270 4CYL ENG), 510 (SN 280000> 4.270 4CYL ENG), 600 (Serial Number below 214999), 3010 (Gas with Block number R26150), 3010 (Serial number below 280000 4.270 4Cyl Eng & Early Power Booster Eng), 3020, 4000, 4020 (GAS Serial number below 200999). Engines: 254D, 254D, 201, 270D, 270D, 270D, 254D, 227, 241, 227 (Part No: 106911)		$18.26
Oil Pan Gasket Set -
  • For John Deere tractor models 4000 (s n 201000-later), 4010, 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4230< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Compatible with John Deere Construction & industrial models 690, 690A< li>
  • Replaces John Deere OEM number RE524085, AR30547< li>
  • Engines: 301 Gas, 340 LP Gas, 341 Gas, 362 Gas, 381 Diesel, 404D Diesel, 404T Diesel, 466D Diesel, 466T Diesel < li> < UL> (Part No: 106912)
$14.76
Oil Pan Gasket Set -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7700, 8100 (s n 99999-earlier), 8200 (s n 99999-earlier), 8300 (s n 99999-earlier), 8560, 8570< li>
  • Compatible with John Deere Harvester(s) 7800< li>
  • Compatible with John Deere Construction & industrial models 644E, 644G, 740E, 740G, 748E, 748G, 770B, 772B, 850C< li>
  • Compatible with John Deere Engine(s) 6076T (Diesel)< li> < UL> (Part No: 106915)
$67.00
Oil Pan Gasket Set -
  • For John Deere tractor models 8630, 8640, 8650< li>
  • Replaces manufacturer number RP345< li>
  • John Deere 619T Diesel Oil Pan Gasket Set< li>
  • Includes: Oil Pan Gasket, Oil Pump Gasket, Oil Cooler Gasket & O-Rings< li> < UL> (Part No: 158232)
$42.00
Oil Pan Gasket Set -
  • For John Deere tractor models 7710, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 9100< li>
  • Compatible with John Deere Construction & industrial models 644H, 848G< li>
  • Compatible with John Deere Engine(s) 6081T (diesel)< li>
  • Replaces manufacturer number RP843< li>
  • Oil Pan Gasket Set - Includes 3 Gaskets< li> < UL> (Part No: 158234)
$39.26
Oil Pump Gear Cover Gasket -
  • For John Deere tractor models A (s n 424025-later), ANH (s n 424025-later), AO (s n 251486-later), AR (s n 251486-later), AW (s n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number B246R< li>
  • 0.020" Thick< li>
  • 4 Bolt Hole< li> < UL> (Part No: 164422)
$7.30
Oil Pump to Crankcase Gasket -
  • For John Deere tractor models A (s n 424025-later), AO (s n 251486-later), AR (s n 251486-later), AW (s n 424025-later), B, BN, BNH, BO, BR, BW, G, GH, GM, GN, GW, R, 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number B251R< li>
  • 0.031" Thick< li>
  • 3 Bolt Hole Pattern< li> < UL> (Part No: 164421)
$7.20
Oil Seal - Seal. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030 (Part No: 162318)$12.76
Oil Seal - Seal. For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830 (Part No: 110547)$6.26
Oil Seal Retainer - Retainer. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030 (Part No: 180328)$31.26
O-Ring Kit -
  • For John Deere tractor models 2155, 2355, 2355N, 2555, 4040, 4240, 4440, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5090E, 5090EL, 5100ML, 5103, 5115ML, 5125ML, 5203, 5303, 5403, 6110, 6110L, 6120, 6120L, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400L, 6403, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500L, 6510L, 6510S, 6515, 6520L, 6603, 6605, 6715< li>
  • Compatible with John Deere Combine(s) 9560, 9560 SH< li>
  • Replaces John Deere OEM number AR65507< li> < UL> (Part No: 166405)
$4.64
Overhaul Gasket Set - For A after serial number 584000. AO, AR SN# 272000 to 281999. Gas 2 Cyl, 321 CID 5-1 2" Bore. Overhaul gasket set 1 used per engine. Does not include Rear Crankshaft Seal Packing. (Part No: 106920)		$174.50
Overhaul Gasket Set -
  • For John Deere tractor model 3120< li>
  • Compatible with John Deere Combine(s) 55, 95< li>
  • Compatible with John Deere Harvester(s) 699< li>
  • Compatible with John Deere Construction & industrial model 540, 540A, 544, 570, 570A< li>
  • Compatible with John Deere Engine(s) 303< li>
  • Replaces John Deere OEM number RE38568, RE501572, RE525003< li> < UL> (Part No: 167362)
$86.00
Overhaul Gasket Set - For B, BN, BW with 2cyl 190 CID Gas after SN# 201000. Full Gasket Set. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106921)		$80.00
Overhaul Gasket Set - For A, AH, AN, and AW S#488000 to 583999 and AO and AR S#260000 to 271999. Full Gasket Set WITHOUT CRANKSHAFT SEALS. (Part No: 106920)$174.50
Overhaul Gasket Set - For A, AH, AN, AW, all SN# 584000 and up. AO, AR SN# 272000 to 281999. Full Gasket Set (Part No: 106920)		$174.50
Overhaul Gasket Set - For model 60 (Crater Style Piston) Gas, 2 Cyl, 321 CID, 5-1 2" bore. Overhaul set (1953-1955) 1 set used per engine. Includes Seals (Part No: 186389)		$281.00
Overhaul Gasket Set without Seals - For tractor models 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355NCS, 2355NTSS, 301A, 302, 302A, 310, 350B, 350C, 350D, 355D, 5000, 5200, 5300, 5400, 5400N, 5500. All with either 3.164D, 3.1779T, or 3.179D engines. (Part No: 106930)$91.00
Rear Crank Seal - For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: 106854)		$26.20
Rear Crank Seal - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: 106856)$27.50
Rear Crankshaft Seal - This rear crankshaft seal has a 4 inch Inside Diameter, a 5.004 inch Outside Diameter and is 0.312 inch wide. It Fits: L, LA, LI, M, MC, MI, MT, MTN, MTW, 320, 330, 40, 420, 430, 440. Replaces: AM220T, AM727T (Part No: 106852)		$20.00
Rear Crankshaft Seal - This rear crankshaft seal has a 4 inch Inside Diameter, a 5.004 inch Outside Diameter and is .5 inch wide. Fits JD 620, 630, 720, 730. OEM Reference #: 303072959, 303072959, A39111, A36610, 163666F, 163666B, A39027, A51339, AF2659R, AF2426R. (Part No: 107461)		$27.00
Rear Crankshaft Seal & Wear Sleeve -
  • For John Deere tractor models 5010, 5020, 6030, 7520, 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Construction & industrial models 644, 644B, 700, 700A, 760, 760A, 762, 770, 850, 855, 860, 860B, 862, 862B, 890, 890A, 990< li>
  • Replaces John Deere OEM number RE13310< li>
  • Engines: 531D, 531T, 619T, 6101T< li> < UL> (Part No: 106858)
$38.26
Rear Main Seal - For 820, 830, 1020, 1030 with 152 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 1420, 1520, 1530, 2040, 2330 with 164 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 2355N, 5400, 5500 with 179 or 3029 Turbo Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For tractor models 3010 with 201 Gas Engine. (Part No: 106856)$27.50
Rear Main Seal - For 2020, 2510 with 202 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 2030, 2270, 2280, 2320, 2420, 2440, 2520, 2530 with 219 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For model 3020 (To S#122999) with 227 Gas Engine. (Part No: 106856)$27.50
Rear Main Seal - For model 3020 (From S#123000) with 241 Gas Engine. (Part No: 106856)$27.50
Rear Main Seal - For 2350, 2355, 2550, 2555 with 239 or 4039 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 2750, 2755, 2850, 2855 with 239 or 4039 Turbo Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 3010, 3020 and 3030 before SN# 280000 with 270 Diesel Engine. (Part No: 106856)		$27.50
Rear Main Seal - For 2630, 2640 with 276 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 6400, 6410, 6500, 6510, 6700 with 276 or 4045 Turbo Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For model 4010 with 301 Gas Engine. (Part No: 106856)$27.50
Rear Main Seal - For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For model 4020 (To S#200999) with 341 Gas Engine. (Part No: 106856)$27.50
Rear Main Seal - For 2940, 2950, 2955, 3150, 3155 with 359 or 6059 Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 4040, 4050, 6600, 7200 with 359 or 6059 Turbo Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For tractor models 4000, 4020 (From S#201000) with 362 Gas Engine. (Part No: 106856)$27.50
Rear Main Seal - For 4000, 4020 before SN# 200999, both with 340 CID Gas. Replaces RE17352, AR63095, SS46821. (Part No: 106856)		$27.50
Rear Main Seal - For 4010 301 CID gas EXCEPT for block numbers R40940 & R49550. (Part No: 106856)		$27.50
Rear Main Seal - For 6800, 6900, 7210, 7400, 7410, 7600 with 414 or 6068 Turbo Diesel Engine (Part No: 106854)$26.20
Rear Main Seal - For 5010, 5020, 6030 with 531 Diesel Engine (Part No: R-RE13310)$42.39
Rear Main Seal - For 6030, 7520 with 531A Diesel Engine (Part No: R-RE13310)$42.39
Rear Main Seal - For 8630, 8640, 8650 with 619 Diesel Engine (Part No: R-RE13310)$42.39
Rockshaft Control Valve Housing Gasket -
  • For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R67121, R57665< li> < UL> (Part No: 179526)
$4.80
Seal - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Price shown is for each, sold only in multiples of 2 items. (Part No: 110545)$7.76
Seal - For tractor models 1630, 1635, 1640, TW, TWA. (Part No: 180702)$8.96
Sealing Ring Liner Kit -
  • For John Deere tractor models 1020 (135 CID Gas Engine (Early Models), s n 162078-earlier), 2020 (180 CID Gas Engine, s n 159926-earlier), 2510 (180 CID Gas Engine with Block T23405, T24960, T26932), 2520 (202 CID Gas Engine, s n 157354-earlier)< li>
  • Compatible with John Deere Construction & industrial models 300 (135 CID Gas Engine (Early Models), 350 (135 CID Gas Engine (Early Models), 400 (180 CId Gas Engine, (Early Models), 450 (180 CId Gas Engine, (Early Models), 480 (180 CId Gas Engine, (Early Models), 544 (303G CID Gas Engine, (Early)< li>
  • Replaces John Deere OEM number R48637, R48638< li>
  • 3 Sealing Rings< li> < UL> (Part No: 176707)
$5.00
Seal Kit -
  • For John Deere tractor models 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8310RT, 8320R, 8320RT, 8335R, 8345R, 8345RT, 8360R, 8360RT< li>
  • Compatible with John Deere Combine(s) 9660, 9660 CTS, 9660 STS, 9760 STS< li>
  • Compatible with John Deere Harvester(s) CH570< li>
  • Replaces John Deere OEM number RE542195< li> < UL> (Part No: 159238)
$9.90
Seal Ring -
  • For John Deere tractor models 2630, 2640, 8320RT, 8345RT, 8370RT< li>
  • Replaces John Deere OEM number R54219< li> < UL> (Part No: 164623)
$12.76
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: 178141)		$9.36
Timing Cover Gasket -
  • For John Deere tractor models 820, 830, 920, 930, 1030, 1130, 1520, 1630, 1830, 2030, 2040, 2130, 2150, 2155, 2255, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2855N, 2950, 2955, 3030, 3055, 3130, 3150, 3155, 3255, 4050, 6200, 6300, 6400, 6500, 6506, 6600, 6800, 6900< li>
  • Replaces John Deere OEM number R97454, T20155< li> < UL> (Part No: 176642)
$7.00
Timing Cover Seal - For 440. Timing Cover Seal. (Part No: 106848)		$12.26
Turbo Inlet Gasket -
  • For John Deere tractor models 2440, 2630, 2640< li>
  • Compatible with John Deere Combine(s) 930, 940, 4420, 6600, 6602, 7700< li>
  • Compatible with John Deere Harvester(s) 484, 9910, 9920, 9930, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 410B, 410C, 415B, 444, 444C, 444CH, 444D, 450D, 450E, 455D, 455E, 490, 510C, 515B, 540B, 544B, 544C, 544D, 550A, 550B, 555A, 555B, 595, 610C, 655, 655B, 690, 690A, 690B, 690CR, 693B, 710B, 710C, 750, 750B, 755A, 755B< li>
  • Replaces John Deere OEM number R97348, R43413< li> < UL> (Part No: 163565)
$1.86
Turbo Mounting Gasket -
  • For John Deere tractor models 1830, 2030, 2130, 2440, 2520, 2555, 2750, 2755, 2855N, 3130, 3255, 4030, 4050, 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 7600, 7700, 7710, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520, 8560, 8570, 9100, 9120< li>
  • Replaces John Deere OEM number R89879, T30820, R55509< li> < UL> (Part No: 163560)
$6.30
Upper Gasket - Valve grind set. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Replaces AR53034, RE524092 (Part No: 106888)		$63.70
Upper Gasket - Valve grind set. For 1020 diesel, 3 cylinder 152 CID. Engine SN# 154766 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: 106876)$65.00
Upper Gasket - Valve grind set. For 2510 diesel, 4 cylinder 202 CID. Use with block numbers: T23406, T24961, T26933 only. TISCO supplies 3.86 standard bore 3 ring piston. For 2020, 2510 (Part No: 106882)$76.00
Upper Gasket - UPPER GASKET For 4320, 4520, 4620, 7020 (Part No: HS3849W)$107.82
Upper Gasket - Valve grind set. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 4040, 4230 (Part No: 106894)$69.20
Upper Gasket - UPPER GASKET For 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450 (Part No: 106897)$109.00
Upper Gasket - For tractor models 2030, 2350, 2355, 2440, 2520, 2550, 2555, 2630, 2640, 2750, 2755. (Part No: 106884)		$52.00
Upper Gasket - UPPER GASKET For 2840, 4030 (Part No: 106885)$77.90
Upper Gasket - Fits John Deere 750, 3150, 655, 2940, 2840, 3255, 3055, 2950, 7400, 710D, 444, 755, 548E, 4030, 2955, 640E, 670, 640, 4050, 3155, 643, 7600, 7200, 444D, 710B. Used on John Deere Engines 359 Diesel, 6059T Diesel, 6068T Diesel. Replaces RE38852, AR102267, AR71195, AR71994, HS3901, HS3901W, RE16924, RE527283. Additional $7.50 shipping due to size. This additional charge will be added to your order. (Part No: 106885)		$77.90
Upper Gasket Set - This upper gaskets set includes all engine rebuild gaskets needed from the head gasket and up. For Diesel tractor models 1520, 1530, 2040, 2150, 2240, 2255. (Part No: 123875)$39.26
Upper Gasket Set - Includes head gasket. For 4000, 4020 (Part No: HS4221)$107.82
Upper Gasket Set - For tractor models (1020 gas), 300, 350. (Part No: 106875)$99.00
Valve Cover Gasket - For model : 850. (Part No: CH10129)$29.47
Valve Cover Gasket - For tractor models 950, 1050. (Part No: 184816)$15.74
Valve Cover Gasket - For tractor models 790, 870, 955. (Part No: M801741)$21.85
Valve Cover Gasket - This valve cover gasket fits the following tractor models: A, AO, and AR. Replaces part number: A1575R. (Part No: 179397)		$17.00
Valve Cover Gasket - This valve cover gasket fits the following tractor models: G. Replaces part number: F129R. (Part No: 180390)		$17.00
Valve Cover Gasket - This valve cover gasket fits the following tractor models: M, 40, 320, and 330. Replaces part number: M230T. (Part No: 179676)		$8.89
Valve Cover Gasket - This valve cover gasket fits the following tractor models: 420, 430, and 440 (Gas or LP). Replaces part number: M3066T. (Part No: 179613)$13.00
Valve Cover Gasket - This valve cover gasket fits the following tractor models: 50. Replaces part number: B3221R. (Part No: 179624)		$24.50
Valve Cover Gasket - This valve cover gasket fits the following tractor models: 60. Replaces part number: A4629R. (Part No: 179625)		$24.50
Valve Cover Gasket - This valve cover gasket fits the following tractor models: 70 (Gas). Replaces part number: F1179R. (Part No: 179626)		$24.50
Valve Cover Gasket - This valve cover gasket fits the following tractor models: 620 and 630. Replaces part number: A5650R. (Part No: 167576)		$44.69
Valve Cover Gasket - This valve cover gasket fits the following tractor models: 1010 and 2010 (Rowcrop & Crawler with the 115, 145, and 165 gas engines). Replaces part number: T12618, T18584, and VS38116. (Part No: 178128)		$19.00
Valve Cover Gasket -
  • For John Deere tractor models 330, 770, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7710, 7800, 7810, 8100, 8200, 8210, 8300, 8400, 8410, 8440, 8450, 8560, 8570, 9100< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9510, 9550, 9600, 9610, 9650, 9660< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 6610, 6650, 7200, 9940, 9950, 9960, 9965, 9970, 9976< li>
  • Compatible with John Deere Construction & industrial models 370, 644A, 644C, 644D, 644E, 644G, 644H, 646, 646B, 646C, 690, 690A, 690B, 690C, 693B, 693C, 740, 740E, 743, 743A, 748E, 748G, 762A, 762B, 770A, 770B, 770C, 772A, 772B, 772CH, 790, 790D, 792, 850B, 850C, 892ELC< li>
  • Compatible with John Deere Engine(s) 6381, 6466D< li>
  • Replaces John Deere OEM number R49866, R26356, R32593< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 117939)
$8.76
Valve Cover Gasket -
  • For John Deere tractor models 2840 (s n 277549-Later), 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120 (s n 277548-Earlier), 3130 (s n 277549-Later), 3140, 3150, 3155, 3255, 3350, 3530 (s n 277549-Later), 3540, 3550, 3640, 4020 (s n 277548-Earlier), 4030, 4050, 4530, 6800, 6900, 7200, 7400, 7410, 7500 (S N 001336-Earlier), 7600< li>
  • Compatible with John Deere Combine(s) 4400 (s n 277549-Later), 4420 (s n 277548-Earlier), 4425 (s n 277549-Later), 9400 (s n 277548-Earlier)< li>
  • Compatible with John Deere Harvester(s) 499, 699, 7440, 7445, 7450, 9900, 9910, 9920, 9930< li>
  • Compatible with John Deere Construction & industrial models 444 (s n 277549 - Later), 444C (s n277549 - Later), 444D (s n 277549 - Later), 544, 544D, 544E, 544G, 548E, 570, 570B, 624, 624G, 640, 640E, 643, 643D, 648E, 653, 653E, 655, 655B, 670, 670B, 672, 690, 690D, 690ELC, 693, 693D, 710, 710B, 710C, 710D, 750, 750B, 750C, 755, 755B, 790, 790ELC, 3420 (s n 158976 - Later)< li>
  • Replaces John Deere OEM number R75728, T20467, R68228< li>
  • Engines: 6.239, 6.359, 6.359D, 6059D, 6068D< li> < UL> (Part No: 128028)
$20.76
Valve Cover Gasket -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Engine(s) 254 (diesel)< li>
  • Replaces John Deere OEM number R49865, R26745, R32592< li> < UL> (Part No: 157818)
$9.20
Valve Cover Gasket -
  • For John Deere tractor models 5010, 5020, 6030, 7520, 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5200, 5460, 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 644B, 646, 646B, 700A, 760, 760A, 762, 770, 770A, 772A, 844, 850, 855, 862, 890, 990< li>
  • Compatible with John Deere Engine(s) 6531 (diesel)< li>
  • Replaces John Deere OEM number R74365, R35024, R36652, R49867< li> < UL> (Part No: 158298)
$25.00
Valve Cover Gasket -
  • For John Deere tractor models 650, 750< li>
  • Replaces John Deere OEM number CH15429< li> < UL> (Part No: 187534)
$18.68
Water Pump Gasket -
  • For John Deere tractor models 1020, 1520, 2020, 2030< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 380, 400, 401, 480< li>
  • Replaces John Deere OEM number T20268< li> < UL> (Part No: 154897)
$4.06
Water Pump Gasket -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Replaces John Deere OEM number T20239< li> < UL> (Part No: 154898)
$6.60
Water Pump Gasket -
  • For John Deere tractor model 4030< li>
  • Compatible with John Deere Combine(s) 975, 985 (s n 403755-earlier), 1065, 1072, 1158, 1166, 1174, 1174H4, 1177, 2054 (European), 4400, 4420, 4425, 4435, 6600< li>
  • Compatible with John Deere Harvester(s) 484, 7440, 7445, 7450, 9900, 9910, 9920, 9930< li>
  • Replaces John Deere OEM number T25485< li> < UL> (Part No: 155354)
$4.70
Water Pump Gasket - Pump to Cover -
  • For John Deere tractor models 7610, 7710, 7720, 7810, 7820, 7920 (8100), 8100, 8100T, 8110, 8110T, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T, 9100, 9200, 9300, 9400< li>
  • Compatible with John Deere Combine(s) 9510, 9550, 9560, 9610, 9640, 9650, 9660, 9680, 9750, 9760< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6950, 7200, 7300, 7400, 7500, 9970, 9976, 9986, 9996< li>
  • Replaces John Deere OEM number R119383< li> < UL> (Part No: 155355)
$11.96
 
Engine Overhaul Kits
Basic Engine Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set and crankshaft seals. Engine bearings must be ordered separately. (Part No: 130670)$860.00
Basic Engine Kit - For 2510 Diesel with block numbers T23406, T24961 & T26933 Only. 4 Cylinder, 202 CID. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Part No: 130672)$645.00
Basic Engine Kit - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86 inch Std bore. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Part No: 130673)$750.00
Basic Engine Kit - For 3010 Gas with block #R26150 Only. 4 Cylinder, 201 CID, Overbore 4 to 4-3 16 inches, 5 Ring Piston. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Part No: 130683)$1125.00
Basic Engine Kit - For 3010 Diesel with block #R26160 Only. 4 Cylinder, 254 CID, Overbore 4-1 8 to 4-1 4 Inches. Engine Block R26160 Only. 3 Ring Piston, Keystone top compression ring. Basic Engine Kit less bearings includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Part No: 130684)		$800.00
Basic Engine Kit - For 3010 Diesel with block #R26160 Only. 4 Cylinder, 254 CID, Overbore 4-1 8 to 4-1 4. 5 Ring Piston, Keystone top compression ring only. Basic Engine Kit less bearings includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Part No: BEKD1431-LCB)		$763.40
Basic Engine Overhaul Kit - Contains sleeves, pistons, rings, pins, pin bushings, overhaul gasket set with crankshaft seals, and rod bolts. For tractor models JD 7710, 7810, 7820, 7920, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8420, 9100 model tractors. With 8.1H Diesel Power tech Engines serial number 86536 to 199999. For engines with Bosch In-Line Injection Pump, pistons marked RE53000, RE64170, RE65289, RE70688, RE502656. (Part No: 130731)$2325.00
Basic Engine Rebuild Kit -
  • For John Deere tractor models 2040, 2150, 2240, 2255< li>
  • Bore Size: 4.19"< li>
  • Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals< li> < UL> (Part No: 184459)
$559.90
Basic Engine Rebuild Kit, Less Bearings -
  • For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450< li>
  • Bore Size: 4.56"< li>
  • Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals< li> < UL> (Part No: 184457)
$1900.00
Basic In-Frame Engine Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4-Cylinder Gas, 180 CID. 3.86" Standard Bore, 3-Ring Piston, 2 Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Part No: 189536)$546.30
Basic In-Frame Engine Kit - For 2510 Gas with block # T32349 Only. 4-Cylinder Gas, 180 CID. 3.86" Standard Bore, 3-Ring Piston, No Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Part No: 189626)$808.10
Basic In-Frame Engine Kit - For 2020 and 2510 Diesel with block numbers T23406, T24961 and T26933 only. 4-Cylinder Diesel, 202 CID. 3.86" Standard Bore, 3-Ring Piston, 2 Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons & rings, pins & retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Part No: 189543)		$637.59
Basic In-Frame Engine Kit - For 2020 and 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4-Cylinder Diesel, 202 CID. 3.86" Standard Bore, 3-Ring Piston, No Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Part No: 189544)$734.46
Basic In-Frame Engine Kit - For 3010 Gas with block #R26150 Only. 4-Cylinder Gas, 201 CID. 4" Standard Bore, 4-3 16" Overbore Supplied, 5-Ring Piston. Basic In-Frame Kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, valve-grind gasket set, oil pan gasket. For 3010 Series. (Part No: 189521)$551.90
Basic In-Frame Engine Kit - For 3010 Diesel with block #R26160 Only. 4-Cylinder Diesel, 254 CID. 4-1 8" Standard Bore, 4-1 4" Overbore Supplied. 3-Ring Piston, Keystone Top Compression Ring, Bearing Locating Tabs Placed Off-Center Both Halves. Basic In-Frame Kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket. For 3010 Series, 3020 Series. (Part No: 189621)$495.01
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO s For 3010, 3020 (Part No: BIFD1431)$495.00
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 & R40840 only. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. TISCO supplies 4-1 4 standard bore For 3020 (Part No: 189522)$495.56
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 4020 gas, 6 cyl. 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. TISCO supplies 4-1 4 For 4020 (Part No: 189524)$715.64
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO supplies 4-1 4 standard bore, 5 ring piston For 3020 (Part No: BIFD1436)$668.31
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 4010 gas, 6 cylinder 301 CID. For blocks marked R26060. Note: this is not the correct kit for blocks marked R40940 or R49550. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. Overbore 4 to 4-3 16 5 For 4010 (Part No: 189525)		$810.53
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO supplies 4-1 4 standard bore, 3 ring piston For 3020 (Part No: 189528)$829.24
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO s For 3010, 3020 (Part No: BIFD3431-5)$667.40
Basic In-Frame Overhaul Kit - This In-frame engine kit is for the 404 CID 6 cylinder diesel engine with standard bore of 4 1 4 inch and engine serial number 215000 to 335845. Contains a 3 ring piston. For tractor models 4000, 4020. (Part No: 189531)$1245.99
Basic In-Frame Overhaul Kit - This in-frame overhaul kit is for the 404 CID Diesel 6 cylinder engine with block number of R33180, R34340, or R40900 only. Engine serial number is up to 214999. Comes with 3 ring Keystone Top Compression Ring For 4010, 4020 (Part No: 189534)$1100.81
Basic In-Frame Overhaul Kit - This in-frame overhaul kit is for the 404 CID Diesel 6 cylinder engine with block number of R33180, R34340, or R40900 only. Engine serial number is up to 214999. Comes with 5 ring Keystone Top Compression Ring For 4010, 4020 (Part No: BIFD4441-5)$975.32
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 1520 diesel, 3 cylinder 164 CID. Engine SN# 160310 & up. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. 4.02 standard bore 3 ring piston, Keystone top co For 1520 (Part No: 189540)$475.99
Basic In-Frame Overhaul Kit - Basic in-frame engine kit. Contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. For 164 CID 3 cylinder, diesel engine serial number 178601 to 179600 only. 4.02 standard bore~ 3 ring piston, keystone top For 1530 (Part No: 189540)$306.00
Basic In-Frame Overhaul Kit - Basic in-frame engine kit. Contains sleeve and piston kit with rings, 1-3 16 inch pins and retainers, valve grind gasket set and pan gasket. For 219 CID 4 cylinder, diesel engine serial number 157576 to 275484. 4.02 standard bore, 3 ring piston, keystone top compression rings. For 2030, 2520. For replacing connecting rod bolts, order R74194 for 2.125 inch bolts, or R80033 for 2.325 inch. Bolts are not included. (Part No: 189546)$638.90
Basic In-Frame Overhaul Kit - Basic in-frame engine kit. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. For 329 CID 6 cylinder, diesel engine to serial number 277549. 4.02 standard bore~ 3 ring piston, keystone top compression r For 4030 (Part No: 189548)$890.21
Basic In-Frame Overhaul Kit - Basic in-frame engine kit. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 4040, 4230 (Part No: 189549)$1184.54
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT For 4320, 4520, 4620, 7020 (Part No: 189631)$1263.35
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 404 CID. 4-1 4" Standard Bore, With ENGINE SN# 335846 and up. 3-Ring Piston, Keystone Top Compression Ring, Late Head. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket. For 7020 Series, 4430 Series, 4630 Series. (Part No: 189551)$1270.46
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Part No: 189552)$1405.74
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul Kit. 4-Cylinder Diesel, 239 CID. Contains sleeves, 3 ring pistons, rings, pins, valve grind gasket set, and oil pan gasket. Piston pin diameter 1-3 8 inches. 4.19 inch standard bore. For standard compression engines with pistons marked RE19282. For 2350, 2355, 2550, 2555. For replacing connecting rod bolts, order R74194 for 2.125 inch bolts, or R80033 for 2.325 inch. Bolts are not included. (Part No: 189555)		$579.81
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul Kit. 4-Cylinder Diesel, 239 CID. Contains sleeves, 3 ring pistons, rings, pins, valve grind gasket set, and oil pan gasket. Piston pin diameter 1-5 8 inches. 4.19 inch standard bore. For standard compression engines with pistons marked RE19278. For 2555, 2750, 2755. For replacing connecting rod bolts, order R74194 for 2.125 inch bolts, or R80033 for 2.325 inch. Bolts are not included. (Part No: 189556)$697.77
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul Kit. 4-Cylinder Diesel, 276 CID. Contains sleeves, 3 ring pistons, rings, pins, valve grind gasket set, and oil pan gasket. Piston pin diameter 1-3 8 inches. 4.19 inch standard bore, 5.000 inch stroke. Sleeves are 8.580 inches overall length. For 2630, 2640. For replacing connecting rod bolts, order 166172. Bolts are not included (Part No: 189558)		$776.33
Basic In-Frame Overhaul Kit - Diesel, 359 CID 6 cylinder diesel. Contains sleeves, 3 ring pistons, rings, pins, valve grind gasket set, and oil pan gasket. Piston pin diameter 1-3 8 inches. 4.19 inch standard bore. 4.330 inch stroke. Sleeves are 7.720 overall length. For standard compression engines with pistons marked RE19282. For 2940, 2950, 2955. For replacing connecting rod bolts, order R74194 for 2.125 inch bolts, or R80033 for 2.325 inch. Bolts are not included. (Part No: 189559)		$1097.64
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. For 3010, 3020 (Part No: 189633)$500.00
Basic In-Frame Overhaul Kit - This in-frame overhaul kit is for the 404 CID Diesel 6 cylinder engine with block number of R40930 only. Engine serial number is up to 214999. Comes with 3 ring Keystone Top Compression Ring For 4010, 4020 (Part No: 189635)$1305.16
Basic In-Frame Overhaul Kit - Basic in-frame engine kit. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. 164 CID 3 cylinder diesel non-turbo engine to serial number 349999~ 4.02 standard bore. For standard compression engines with For 1530, 2040 (Part No: 189554)$504.86
Basic In-Frame Overhaul Kit - Basic in-frame engine kit. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. For 219 CID 4 cyl. diesel engine~ 4.02 standard bore. 3 ring piston, keystone top compression ring. For 2030, 2440 (Part No: 189557)$700.42
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul Kit. 6-Cylinder Diesel, 329 CID. Contains sleeves, 3 ring pistons, rings, pins, valve grind gasket set, and oil pan gasket. Piston pin diameter 1-3 8 inches. 4.02 inch standard bore. 4.330 inch stroke. O-Ring grooves are in the block, not on the sleeves. For engines with pistons marked AR78310 or AR77762. For 2840 and 4030, both with engine serial number 277550 and up. For replacing connecting rod bolts, order R74194 for 2.125 inch bolts, or R80033 for 2.325 inch. Bolts are not included. (Part No: 189565)		$1048.73
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT. 179 CID 3 cyl. diesel, 4.19" standard bore, 3 ring piston. For tractor models (2040, 2240 SN# 350000 and up), 2150, 2255. (Part No: 189560)$504.57
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R71074. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket set. For 4640 Series, 4440 Series, 4250 Series, 4450 Series, 4650 Series, 6620 Series, 7720 Series. (Part No: BIFD6466)		$1237.67
Basic In-Frame Overhaul Kit, 135 CID Gas - Basic In-Frame engine kit. For 1020 gas, 3 cylinder 135 CID. FOR ENGINES THAT HAVE 2-O RING GROOVES (FOR SLEEVES) MACHINED ON THE PISTON SLEEVE. Up to SN# 162078. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set, pan gasket & sleeve o-rings. 3.86 standard bore 3 ring piston. (Part No: 189622)$649.99
Basic In-Frame Overhaul Kit, 152 CID Diesel - Basic In-Frame engine kit. For 1020 diesel, 3 cylinder 152 CID. Engine SN# 154766 & up. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: 189539)$536.07
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 & R40840 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, complete gasket set, crankshaft seals. (Part No: 130685)$740.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 4020 tractor and 600 industrial gas, 6 cyl. 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaf For 4020 (Part No: 130705)		$800.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 4010 gas, 6 cylinder 301 CID. Use with blocks except numbers R40940, R49550 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order beari For 4010 (Part No: 130704)$1675.00
Basic Overhaul Kit - Engine Kit. 6-Cylinder Diesel, 381 CID. 4-1 8 inch Standard Bore, 4-1 4 inch Overbore Supplied. 5-Ring Piston. Also for 404 with standard 4-1 4 inch bore. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4010 Series, 4020 Series. Original Block, Thru ESN 64999, block marked R26070, R33180, R34340, R40890, R40900 has weep holes. Will not work on Block number R40930. (Part No: 190125)		$1326.25
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Order bearings separa For 3020 (Part No: 130686)$750.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, For 3010, 3020 (Part No: BEKD3431-5-LCB)$781.95
Basic Overhaul Kit - 6-Cylinder Diesel, 404 CID. 4-1 4 inch standard bore, 3-ring piston. Basic engine kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, standard rod and main bearings, connecting rod bolts, complete gasket set, crankshaft seals. Ford Engine Serial numbers 215000 to 335845. For 4000 Series, 4020 Series. (Part No: 130702)		$1100.00
Basic Overhaul Kit - 6-Cylinder Diesel, 381 CID. 4-1 8" Standard Bore, 4-1 4" Overbore Supplied. 5-Ring Piston. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4010 Series, 4020 Series. (Part No: BEKD4441-5-LCB)$1131.34
Basic Overhaul Kit - 6-Cylinder Diesel, 381 CID. 4-1 8 inch standard bore, 4-1 4 inch overbore supplied. 3-ring piston, Keystone top compression ring. Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For blocks marked R33180, R34340, R40890, R40900 (Part No: 130630)		$1400.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 2510 gas, 4 cylinder 180 CID. Use with block number T32349 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be orde For 2020, 2510 (Part No: 130671)		$870.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 1520 diesel, 3 cylinder 164 CID. Engine SN# 160310 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order bearings separately. TISCO sup For 1520 (Part No: 130654)$580.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 164 CID 3 cylinder, diesel engine serial number 178601 to 17960 For 1530 (Part No: 130654)$580.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 2520 diesel, 4 cylinder 219 CID. Engine SN# 157576 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order bearings separately. TISCO sup For 2030, 2520 (Part No: 130675)$700.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 219 CID 4 cylinder, diesel engine serial number 211700 to 27548 For 2030 (Part No: 130675)$700.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 329 CID 6 cylinder, diesel engine to serial number 277549. Block marked T32345, R53260, R55037, R72968, 1.1875" pin, o-ring grooves in block (Part No: 130698)$751.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Order engine bearings separately. For 404 CID 6 cylinder diesel engine, 4.25 s For 4040, 4230 (Part No: 130708)$1100.00
Basic Overhaul Kit - BASIC Overhaul Kit For 4320, 4520, 4620, 7020 (Part No: 130712)$939.00
Basic Overhaul Kit - BASIC Overhaul Kit 6-Cylinder Turbocharged Diesel, 404 CID With ENGINE SN# 335846 and up. 4-1 4" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Late Head. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 7020 Series, 4230 Series, 4430 Series, 4630 Series. (Part No: 130713)		$1200.00
Basic Overhaul Kit - BASIC Overhaul Kit. 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Part No: 130714)$1250.00
Basic Overhaul Kit - BASIC Overhaul Kit For 2350, 2355, 2550, 2555. 239 4 Cylinder Diesel Engine. 4.19 inch standard Bore. 1-3 8 inch pin diameter, for Pistons Marked RE19282 (Part No: 130677)$660.00
Basic Overhaul Kit - BASIC Overhaul Kit. Fir 4-239T 4 cylinder turbo charged diesel engine. 3 ring piston, 4.19 inch bore, 1-5 8 inch diameter. For standard compression engines with pistons marked RE19278 (Part No: 130680)		$750.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 276 CID 4 cylinder diesel non-turbo engine~4.19 standard bor For 2630, 2640 (Part No: 130681)$760.00
Basic Overhaul Kit - BASIC Overhaul Kit. For tractor models 2940, 2950, 2955. (Part No: 130700)$975.00
Basic Overhaul Kit - Basic engine kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, For 3010, 3020 (Part No: 189728)$1067.85
Basic Overhaul Kit - For 4010, 4020. 6-Cylinder Diesel, 381 CID. 4-1 8" Standard Bore, 4-1 4" Overbore Supplied. 3-Ring Piston, Keystone Top Compression Ring. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Used only on blocks marked R40930. For 4010 Series, 4020 Series. (Part No: 189729)		$750.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. 164 CID 3 cylinder diesel non-turbo engine to serial number 349999~ For 1530, 2040 (Part No: 130655)$620.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 219 CID 4 cyl. diesel engine~ 4.02 standard bore. 3 ring pist For 2030, 2440 (Part No: 130676)$660.00
Basic Overhaul Kit - Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 329 CID 6 cylinder, turbo diesel engine serial number 277550 and up. 1-3 8 inch piston pin. With piston AR77762. With connecting rod RE16495. (Part No: 130699)		$1000.00
Basic Overhaul Kit - BASIC Overhaul Kit. 179 CID 3 cyl. diesel engine, 4.19" standard bore, 3 ring piston. For tractor models (2040, 2240 SN# 350000 and up), 2150, 2255 (Part No: 130656)$570.00
Basic Overhaul Kit - BASIC Overhaul Kit 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R71074. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4640 Series, 4440 Series, 4250 Series, 4450 Series, 4650 Series, 6620 Series, 7720 Series. (Part No: 130711)$1350.00
Basic Overhaul Kit, 135 CID Gas - Basic engine kit, less bearings. For 1020 gas, 3 cylinder 135 CID. For engine SN# 162079 & up. FOR ENGINES THAT HAVE 2-ORING GROOVES (FOR SLEEVES) MACHINED ON THE ENGINE BLOCK. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, piston liner seals. Order bearings separately. TISCO sup For 1020 (Part No: 130652)$750.00
Basic Overhaul Kit, 152 CID Diesel - Basic engine kit, less bearings. For 1020 diesel, 3 cylinder 152 CID. To engine SN# 154765. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order bearings separately. TISCO supp For 1020 (Part No: 130649)$550.00
Basic Overhaul Kit, 152 CID Diesel - Basic engine kit, less bearings. For 1020 diesel, 3 cylinder 152 CID. Engine SN# 154766 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order bearings separately. TISCO sup For 1020 (Part No: 130650)$560.00
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 4000, 4020, 4040, 4230, 4520. Valve overhaul kit. Contains intake & exhaust valves, valve caps, springs, and keys. 1 kit used in 404 CID 6 cylinder diesel engine (s n 215000 & up); 404 CID turbocharged diesel engine (to s n 245546). (Part No: VOKD404B)		$137.66
Cylinder Kit -
  • For John Deere tractor models 2040 (s n 350000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2940, 2950, 2955, 3055, 3150, 3155, 5200, 5300< li>
  • Replaces John Deere OEM number RE24458, RE30250< li>
  • Includes; Sleeve, piston, rings, pin< li>
  • Sold per cylinder< li> < UL> (Part No: 108584)
$131.00
Cylinder Kit -
  • For John Deere tractor models 510 (s n 280000-later), 3020 (s n 280000-later), 4000 (s n 215000-335845), 4020 (s n 215000-335845)< li>
  • Compatible with John Deere Combine(s) 6600 (s n 215000-335845), 7700 (s n 215000-335845)< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 280000-later), 500B (s n 280000-later), 500C (s n 280000-later), 510 (s n 280000-later), 600 (s n 215000-335845)< li>
  • Replaces John Deere OEM number RE23165< li>
  • Order 4 or 6 for a complete engine< li>
  • 6 Cylinder blocks marked R40610, R49620, R45950, R47170, R48440< li>
  • 4.25" [108mm] Bore< li>
  • 1.50" Piston Pin< li>
  • 38mm< li> < UL> (Part No: 113907)
$138.00
Cylinder Kit -
  • For John Deere tractor models 6400, 6400L, 6500, 6500L, 7400, 7600< li>
  • Compatible with John Deere Combine(s) 9400< li>
  • Compatible with John Deere Construction & industrial models 344G, 440C, 440D (s n 201307-later), 444G, 510C (s n 177226-later), 510D, 540B, 540D (s n 216422-later), 540E, 544D, 548D (s n 216422-later), 550, 550A, 555, 555A, 590D (s n 216422-later), 595, 595D (s n 216422-later), 610B, 610C (s n 177226-later), 624E, 624G, 640, 640D, 640E, 643 (s n 201457-later), 643D, 648D, 653E, 655B, 670, 670A, 670B, 672B, 690ELC, 750, 750B, 750C, 755, 755B, 790ELC< li>
  • Compatible with John Deere Engine(s) 4045, 4045T, 6068T, 6414D, 6414T< li>
  • Replaces John Deere OEM number RE53073, RE28977< li>
  • Kit includes: Piston, piston rings, pin, sleeve, o-rings and retaining rings< li>
  • Sold per cylinder< li> < UL> (Part No: 156336)
$143.50
Cylinder Kit -
  • For John Deere tractor models 2630, 2640< li>
  • Compatible with John Deere Engine(s) 4276 (Diesel)< li>
  • Replaces John Deere OEM number RE19831< li>
  • 1.375" Piston Pin Diameter< li>
  • Includes: Liner, Piston, Rings, Pin and Retainers< li> < UL> (Part No: 166176)
$159.00
Cylinder Kit -
  • For John Deere Construction & industrial models 644B, 646B, 770, 770A, 772A< li>
  • Compatible with John Deere Engine(s) 6531 (Turbo Diesel)< li>
  • Replaces OEM number CK1036< li> < UL> (Part No: 166304)
$300.00
Cylinder Kit -
  • For John Deere tractor models 600, 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Combine(s) 105< li>
  • Compatible with John Deere Construction & industrial models 500A< li>
  • Compatible with John Deere Engine(s) 254 (D), 270 (D), 381 (D), 404 (D)< li>
  • Replaces John Deere OEM number RE23170< li>
  • 4.250" Bore< li> < UL> (Part No: 166765)
$122.00
Cylinder Kit -
  • For John Deere tractor models 7710, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 9100< li>
  • Compatible with John Deere Combine(s) 9510, 9550, 9550 SH< li>
  • Compatible with John Deere Harvester(s) 9970< li>
  • Compatible with John Deere Construction & industrial models 330CLC, 330LC, 330LCR, 370, 370C, 530B, 535, 560D, 608B, 608L, 608S, 644G, 644H, 644J, 660D, 703G, 724J, 740G, 748G, 748GII, 748GIII, 753G, 753GL, 770C, 770CII, 770CH, 770CHII, 770D, 772CH, 772CHII, 772D, 848G, 850, 850C, 850CII, 850J, 853G, 870D, 872D, 900, 903G, 950, 953G, 1270D, 1470D, 3554< li>
  • Replaces OEM number CK1042< li> < UL> (Part No: 166948)
$151.00
Cylinder Kit -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 7700, 7800, 8100, 8200, 8300, 8570< li>
  • Compatible with John Deere Combine(s) CTS, 9500, 9600< li>
  • Compatible with John Deere Harvester(s) 6610, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 644E, 644ER, 644G, 740E, 740G, 748E, 748G, 770B, 770BH, 772B, 772BH, 792DLC, 850C, 892ELC< li>
  • Compatible with John Deere Engine(s) 6076A, 6076T< li>
  • Replaces John Deere OEM number RE60294, RE57512< li> < UL> (Part No: 167341)
$122.00
Cylinder Kit -
  • For John Deere Construction & industrial models 340D, 344E (s n 2999999-earlier), 410C (s n 2999999-earlier), 450E, 450G (s n 2999999-earlier), 455G (s n 2999999-earlier), 490D (s n 2999999-earlier), 493D (s n 2999999-earlier), 510B, 544B< li>
  • Compatible with John Deere Engine(s) 4276 (D), 6414D< li>
  • Replaces John Deere OEM number RE19833< li>
  • Replaces Casting number AR68188< li>
  • Pin Diameter: 1.625"< li> < UL> (Part No: 167354)
$164.00
Cylinder Kit -
  • For John Deere tractor models 4040, 4240, 4440, 4640, 4840, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830< li>
  • Compatible with John Deere Construction & industrial models 644C, 646C, 740A, 743, 743A, 762A< li>
  • Compatible with John Deere Engine(s) 6466A, 6466T< li>
  • Replaces John Deere OEM number RE60288< li> < UL> (Part No: 167371)
$107.00
Cylinder Kit -
  • For John Deere tractor models 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 7700< li>
  • Replaces John Deere OEM number RE23160< li> < UL> (Part No: 167391)
$107.00
Cylinder Kit -
  • For John Deere tractor models 1520, 1530, 2030, 2040, 2440, 2520, 2840, 4030 (all diesel)< li>
  • Compatible with John Deere Construction & industrial models 302, 302A, 310, 310A, 310B, 350C, 401B, 401C, 401D, 410, 410B, 440A, 440B, 450A, 450B, 450C, 450D, 455D, 480A, 480B, 480C, 710B< li>
  • Compatible with John Deere Engine(s) 164 (Diesel), 219 (Diesel)< li>
  • Replaces John Deere OEM number RE53322, AR90550< li>
  • High Compression< li>
  • Pin Diameter: 1.375"< li>
  • No O-Ring grooves < li> < UL> (Part No: 167414)
$370.00
Cylinder Kit -
  • For John Deere tractor models 5039D, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5103, 5203, 5303, 5403< li>
  • Compatible with John Deere Construction & industrial models 410C, 440D, 448D, 495D, 510C, 540D, 544C, 544E, 544E LL, 544E TC, 548D, 550A, 555A, 610B, 610C, 624E, 640D, 643, 648D, 670A, 670B, 672A, 672B, 750< li>
  • Replaces John Deere OEM number RE19832< li> < UL> (Part No: 167432)
$83.00
Cylinder Kit -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7720< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 646C, 653E, 690C, 690CR, 693C, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B< li>
  • Replaces John Deere OEM number RE60282< li> < UL> (Part No: 167500)
$107.00
Cylinder Kit -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7720< li>
  • Compatible with John Deere Engine(s) 6466D< li>
  • Replaces John Deere OEM number RE60290< li> < UL> (Part No: 167501)
$177.00
Cylinder Kit -
  • For John Deere tractor models 3020 (s n 122999-later), 4000, 4020 (s n 200999-later), 4040, 4230< li>
  • Compatible with John Deere Combine(s) 105 (s n 19000-later), 6600 (s n 156500-later), 6602 (s n 1500-earlier), 7700 (s n 8000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123113-later), 500B, 500C, 510, 600 (s n 200999-later)< li>
  • Compatible with John Deere Engine(s) 270 (Diesel, 6 cylinder), 404 (Diesel, 6 cylinder)< li>
  • Kit includes: piston, piston rings, piston pin, cylinder liner, and cylinder liner seals< li>
  • Bore: 4.250"< li>
  • Stroke: 4.750"< li>
  • All Hyper-formance pistons offer compression enhancement for improved engine starting< li>
  • Hyper-formance cylinder kits offer a sensible solution to starting problems as well as long engine life< li> < UL> (Part No: 185590)
$124.00
Cylinder Kit - 4.1875" Overbore -
  • For John Deere tractor models 3010, 4010< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Compatible with John Deere Engine(s) 201 (gas, original block), 301 (gas, original block)< li>
  • Standard Bore: 4.000"< li>
  • Cylinder Kit Includes: Liner, Piston, Pin and Rings< li> < UL> (Part No: 163982)
$240.00
Cylinder Kit, High Performance -
  • For John Deere tractor models 4250, 4450, 4650, 4850, 8450< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 646C, 690D, 693C, 740A, 743, 743A, 762A, 762B, 770A, 772A, 790, 790D, 792, 850B< li>
  • Compatible with John Deere Engine(s) 6466A, 6466T< li>
  • Replaces John Deere OEM number RE60282HC< li>
  • High Compression< li> < UL> (Part No: 167422)
$180.00
Cylinder Kit, Low Ring -
  • For John Deere tractor models 4955, 4960, 8560, 8570 (s n 568444-earlier)< li>
  • Compatible with John Deere Engine(s) 6076A, 6076T< li>
  • Replaces John Deere OEM number RE48739, RE60297, RE57731< li> < UL> (Part No: 167342)
$141.00
Cylinder Liner -
  • For John Deere tractor models 820 (3.152D engine s n 154766-later), 830 (3.152D engine s n 154766-later), 1020 (3.152D engine s n 154766-later), 1030 (3.152D engine s n 154766-later), 2020 (4.202 engine s n 158257-later), 2510 (4.202 engine s n 158257-later)< li>
  • Compatible with John Deere Construction & industrial models 300 (3.152 engine s n 154766-later), 300A (3.152 engine s n 154766-later), 300B (3.152 engine s n 154766-later), 301A (3.152 engine s n 154766-later), 350A (3.152 engine s n 154766-later), 350B (3.152 engine s n 154766-later), 380 (3.152 engine s n 154766-later), 400, 440, 480, 544 (6.303 engine s n 158976-later), 3420 (6.303 engine s n 158976-later)< li>
  • Replaces John Deere OEM number T32340< li> < UL> (Part No: 176706)
$37.00
Cylinder Liner O-Ring Kit -
  • For John Deere tractor models 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 700, 700A, 760, 760A< li>
  • Compatible with John Deere Engine(s) 6531 (Diesel)< li>
  • Replaces John Deere Block Casting number R40270, R42370, R45300, R47510< li>
  • Replaces John Deere OEM number AR55951< li>
  • Kit includes: 3 o-rings for cylinder liner< li> < UL> (Part No: 176979)
$18.00
Cylinder Sleeve -
  • For John Deere tractor models 3020 (s n 123000-later), 4000, 4020 (s n 215000-later), 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020< li>
  • Replaces John Deere OEM number R40615, R40610, R40620, R40700, R40910, R43310, R45950, R45980, R47020, R47110, R47170, R47520, R48430, R48440, R49470, R49650, R50610, R59850, R72127, R72128< li>
  • Bore: 4.25"< li> < UL> (Part No: 128720)
$71.00
Engine Cylinder Kit - High Compression, John Deere 6081, RE64509 -
  • For John Deere tractor models 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 9100< li>
  • Compatible with John Deere Combine(s) 2256, 2258, 2264 (s n 068584-later), 2266 (s n 068583-earlier), 9510, 9510 SH, 9550, 9550 SH, 9560 WTS (s n 080015-earlier), 9580 WTS (s n 080015-earlier), 9640 WTS< li>
  • Compatible with John Deere Harvester(s) 1470, 9970< li>
  • Compatible with John Deere Construction & industrial models 370, 530B, 535, 560D, 644G, 644H, 660D, 748G (engine s n 086535-earlier), 762B< li>
  • Compatible with John Deere Engine(s) 6081< li>
  • Replaces John Deere OEM number RE64509< li>
  • Bore: 4.56" (116.00mm)< li>
  • Pin: 1.85" (47.00mm)< li>
  • High Compression Piston< li>
  • Sold per cylinder< li>
  • Kit includes: Piston, piston rings, pin, sleeve, o-rings and retaining rings< li> < UL> (Part No: 124028)
$240.00
Engine Cylinder Kit, John Deere 4045D & 6068D -
  • For John Deere tractor models SE6510, SE6520, 5410, 5415, 5420, 5510, 5615, 5715, 6010, 6110, 6205, 6505, 6510, 6515, 6520, 6610< li>
  • Compatible with John Deere Construction & industrial models 210LE, 310E, 485E, 486E, 488E< li>
  • Compatible with John Deere Engine(s) 4045 (Diesel), 6068 (Diesel)< li>
  • Replaces John Deere OEM number RE65966, RE505110< li>
  • Bore: 4.19" (106.5mm)< li>
  • Pin: 1.375" (35.00mm)< li>
  • Sold per cylinder< li>
  • Kit includes: Piston, piston rings, pin, sleeve, o-rings and retaining rings< li> < UL> (Part No: 123924)
$173.00
Engine Cylinder Kit, John Deere 4045T/H & 6068T/H -
  • For John Deere tractor models 4700, 6010, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6510L, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 444H, 555G, 650G, 710D< li>
  • Compatible with John Deere Engine(s) 4045T, 6068H, 6068T< li>
  • Replaces John Deere OEM number RE507850< li>
  • Bore: 4.19" (106.5mm)< li>
  • Pin: 1.62" (41.00mm)< li>
  • Sold per cylinder< li>
  • Kit includes: Piston, piston rings, pin, sleeve, o-rings and retaining rings< li> < UL> (Part No: 124025)
$221.00
Engine Cylinder Sleeve, John Deere 531 Diesel -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 700, 700A, 760, 760A< li>
  • Compatible with John Deere Engine(s) 6531 (Diesel)< li>
  • Replaces John Deere OEM number R42366< li>
  • Bore Diameter: 4.750"< li>
  • Flange Outer Diameter: 5.743"< li>
  • Sleeve O.D. at Pilot: 5.486"< li>
  • Sleeve O.D. at Barrel: 5.412"< li>
  • Sleeve Outer Diameter at Seal: 5.171"< li>
  • Length: 9.750"< li>
  • Firewall: 0.048< li>
  • Sleeve Type: Wet< li> < UL> (Part No: 156341)
$120.00
Engine Kit - Engine overhaul kit (Reliance), with standard bearings. For 6-466D. Contains sleeves, pistons, rings, pins & retainers, engine bearings, overhaul gasket set, front & rear seals, rod bushings, rod capscrews, camshaft bushings, and balancer bushings (where applicable). Tractors: 4050, 4240. Combine: 6620. (Part No: 130799)		$1040.00
Engine Kit, Less Bearings - 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Part No: EOK4460-LCB)		$2088.85
Engine Kit, Less Bearings - 6-Cylinder Turbocharged Diesel, 404 CID. 4-1 4" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, R43120 Cylinder Head. Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 4520 Series. (Part No: EOK4459-LCB)		$1811.40
Engine Kit, Less Bearings - 6-Cylinder Turbocharged Diesel, 404 CID. 4-1 4" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, R43120 Cylinder Head. Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 4520 Series. (Part No: EOK4459-LCB)		$1916.90
Engine Major Overhaul Kit - For tractor models (2510 Gas with Block #T23405, T24960, T26932), 202 SN<159926, (480 Lift Truck, 400 & 450 Wheel Loader, all early models) all with 180 CID Gas, 4 Cylinder, 3.86" bore, 3 ring piston. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK180)$1025.56
Engine Major Overhaul Kit - For (2510 Gas with block #T32349), 2020 SN# 159927>, (400, 450, Wheel Loaders & 480 Lift Truck, all late models, all with 180 CID, 4 cylinder, 3.86" bore, 3 ring pistons. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK242)$1214.21
Engine Major Overhaul Kit - For 4010 Gas except with block #R40940 & R49550 with 301 CID, 6 cylinder, Overbore 4" to 4-3 16", 5 ring pistons. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, or .020, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK244)$1304.06
Engine Major Overhaul Kit - For 3020 Gas SN<122999, (500, 500A, 500B, all with SN<123113), all 227 CID, Gas, 4 cylinder, 4.25" bore, 4 ring piston. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, or .020, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 172270)$1035.51
Engine Major Overhaul Kit - For 1520 AG with SN<179601, (302, 302A all with SN<179601), all with 3.164D Diesel, 300 Series, O-rings on Liner 3 cylinder, 4.02" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK3310)$676.43
Engine Major Overhaul Kit - For 1420, 1520, 1530, 350B all with SN<179601, 3.164D Diesel, 300 Series, O-rings in block, small pin, 3 cylinder 4.02" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK3593)$580.00
Engine Major Overhaul Kit - For 2355NCS, 2355TSS, with 3.179T Diesel, 300 Series, 3 cylinder, 4.19" bore, 1.6" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK3115)$704.06
Engine Major Overhaul Kit - For 2020, 2510, 400, 440, 450, 480 all with SN<158257, 4.202 Diesel, 300 Series, O-Rings on liner, block # T23405 or T24961, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set, Camshaft Conn Rod Bushing and Bolts, and Camshaft Bushing. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030, Camshaft Bushing out. Diameter .020 O S or inner dia. .020 O S. Rear Seal not used with flywheel housing marked T20300, T22991. (Part No: 130672)$645.00
Engine Major Overhaul Kit - For 2520, 440A with SN# 275483> 4.219 Diesel, 300 series, O-Rings on liner, 4 cylinder, 4.02" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: OK1430)$861.35
Engine Major Overhaul Kit - For 499, 2030, 2270, 2320, 2429, 401A, 480A, 450B, 401, 440, 440B, 450A with SN# 275483> 4.219 Diesel, 300 Series, 4 cylinder, 4.02" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK4593)$856.29
Engine Major Overhaul Kit - For tractor models 940, 2130, 2350, 2355, 2355CS, 2360, 2535, 2550, 2555CS, 2730, 2735, 3330, 3430, 6602, 70, 70D, 210C, 310D, 310C, 315C, 400G, 415B, 415C, 490, 515B, 34, 44, 45, all with 4.239D Diesel, 300 Series 4 cylinder, 4.19" Bore, 1.375" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S, and specify conn. Rod (m)R51727, use R74194. (Part No: AT86992)$921.16
Engine Major Overhaul Kit - For tractor models 5600 Mercosur, 70D, 210D, 244E, 290D, 310D, 310C, 315C, 315D, 400G, 482C, 515B, all with 4039D Diesel, 300 Series, Liter designated, 4 cylinder, 4.19" boare, 1.4" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: AT86992)$921.16
Engine Major Overhaul Kit - For 2140, 2250, 2450, 2555, 2555TSS, 2650, 2750, 2755, 2755CS TSS, 2855, 2855N, 3430, 3820, 945, 952, 1052, 1155, 2850, 310C, 310D, 315C, 315D all Turbo with 4.239T Diesel, 300 Series, 4 cylinder, 4.19" bore, 1.6" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: RE54709)$856.23
Engine Major Overhaul Kit - For 5500N, 5700, 6100, 6200, 6210, 6300, 6310, 6500, 515B, (300D, 310C, 315C, 315D, with Turbo) all with 4039T Diesel, 300 Series, Liter designated, 4 Cylinder, Conn Rod: R80032, R58979, R113612, 4.19" bore, 1.6" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: RE54709)$856.23
Engine Major Overhaul Kit - For 2630, 2640, (410C with Turbo), all with 4.276D Diesel, 300 Series, 4 cylinder, 4.19" bore, 1.37" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: AT86990)$1124.78
Engine Major Overhaul Kit - For 340D, 344E, 410C, 410D, 440C, 450E, 450G, 455E, 490D, 493D, 510B, all with 4.276D Diesel, 300 Series, 4 cylinder, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: RE63694)$749.85
Engine Major Overhaul Kit - For 340D, 344E, 410C, 410D, 440C, 450E, 450G, 455E, 490D, 493D, 510B all with 4045D Diesel, 300 Series, Liter designated, 4 cylinder, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: RE63694)$749.85
Engine Major Overhaul Kit - For 340D, 344G, 410C Turbo, 410D Turbo, 440C, 444E, 444G, 448D, 450E, 450G, 455E, 455G, 490E, 495D, 548D, 510C, 540D, 550A, 550B, 550G, 555A, 555B, 555G, 590D, 595D, 610B, 610C, 650G, all with 4045D Engine, 4.276T Diesel, 300 Series, 4 cylinder, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: RE61612)$731.68
Engine Major Overhaul Kit - For 6400, 6410, 6500, 6500L, 6510, 6700, 340D, 344G, 410C Turbo, 410D Turbo, 440C, 444E, 444G, 448D, 450E, 450G, 455E, 455G, 490E, 495D, 548D, 510C, 540D, 550A, 550B, 550G, 555A, 555B, 555G, 590D, 595D, 610B, 610C, 650G, all with 4045T Diesel, 300 Series, Liter designated, 4 cylinder, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Camshaft Bushing of out dia. 020 O S or in dia. 020 O S. (Part No: RE61612)$731.68
Engine Major Overhaul Kit - For 544 with SN<158975, 6.303 Diesel, 300 Series, 6 cylinder, Block #: T24967 and T24968, O-rings on liner, 3.86" bore, 1.185" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK6481)$1,508.02
Engine Major Overhaul Kit - For tractor models 3420, 544 with 6.303 Diesel, 300 Series, 6 cylinder, blocks: R53260, R55035, R55351, R72970, R79280, T32346, 3.86" bore, 1.185" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 130740)$1100.00
Engine Major Overhaul Kit - For tractor models 699, 3120, 540A, all with SN<277548, 6.329 Diesel, 300 Series, 6 cylinder, Block #s R53260, R55035, R55351, R72970, R79280, T32346, 4.02" bore, 1.185" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 130697)$1100.00
Engine Major Overhaul Kit - For 499, 950, 960, 1072, 2840, 3130, 3530, 4030, 4400, 4425, 444C, 444D, 444CH, 570A, 710B, 444, 544A all SN# 277549> 6.329 Diesel, 300 series, 6 cylinder, Block #2 R53260, R55035, R55351, R72970, R79280, T32346, 4.02" bore, 1.375" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: AT86986)$1361.54
Engine Major Overhaul Kit - For 2940, 2950, 2955, 3050, 3140, 3150, 3155TS, 3155, 3255, 3350, 4420, 7440, 7445, 9900, 9910, 9920, 4530, 955, 1055, 1075, 975, 985, 444D, 570B, 55, 54, all 6.359D Diesel, 300 Series, 6 cylinder, Block #s R53260, R55035, R55351, R72970, R79280, T32346, 4.19" bore, 1.375" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE50784)$1443.16
Engine Major Overhaul Kit - For 2955, 3155, 3155TSS, 3255, 9900, 9910, 9920, 444D, 570B, 54, 55 all with 6059D Diesel, 300 Series, 6 cylinder, 4.19" bore, 1.375" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE50784)$1443.16
Engine Major Overhaul Kit - For 3140C, 3450, 3550, 4050, 7200, 7445, 7484, 9400, 9930, 444D, 544G, 544E, 544EH, 570B, 710B, 710C, 65, all 6059T Diesel, 300 Series Liter Designated, 6 cylinder, 4.19" Bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE50783)$1427.55
Engine Major Overhaul Kit - For 3140C, 6600, 7200, 7445, 7484, 9400, 9930, 444D, 544G, 544E, 544EH, 570B, 710B, 710C, 65, all with 5.359T Diesel, 300 Series, 6 cylinder, 4.19" boare, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE50783)$1427.55
Engine Major Overhaul Kit - For 544B Wheel Loader, 640 skidder, (670, 670A, 672A Motor Graders), (750, 755 Crawler Dozers), all with 6.414D Diesel, 300 Series, 6 cylinder, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK3694)$1397.13
Engine Major Overhaul Kit - For (544B, 544C, 640, 655, 755, 755A, 544C, 544D, 624E, 644E, 755 Wheel Loaders), 755B Crawler Tractor, (640, 640D, 648D Skidders), (670, 670A, 672A, 670B, 672, 672B Graders), (643, 693D Buncher, (690D Excavator) all with 6.414T Diesel, 300 Series, 6 cylinder, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Crank Seals, Pin Bushings. Connecting Rod Bolts, Cam Bushing, Gasket Overhaul set. Rod and Main Bearings sold separately. (Part No: 130729)$975.00
Engine Major Overhaul Kit - For tractor models 3020, 500, 500A, all with SN<280000, 4.270 Diesel, 400 Series, 6 Cylinder, Block #s R46350, R46430, R40910, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17898)$1143.79
Engine Major Overhaul Kit - For 3010, 3020, 500, 500A all with SN<280000, 4.270 Diesel, 400 Series, 4 cylinder, 4.25" bore, 1.50" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17899)$825.24
Engine Major Overhaul Kit - For 3010, 3020, JD500, JD500A, JD500B, all SN<280000 Early Power booster, 4.270 Diesel, 400 Series, 4 cylinder, EXCEPT Blocks R46350, R46430, R40910, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK4163)$1134.36
Engine Major Overhaul Kit - For 3020, 500C, 520, 500A, 500B all with SN# 280001>, 4.270 Diesel, 400 Series, 4 Cylinder, Block #s R40700, R47520, R48430, R50610, R72127, R40620, R40910, R45950, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17900)$1145.22
Engine Major Overhaul Kit - For 4010, 4020, 600 all with SN<214999, 6.404D Diesel, 400 Series, 6 Cylinder, Block #s R26070, R33180, R34340, R40890, R40900, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17901)$1254.78
Engine Major Overhaul Kit - For 4010, 4020, 600, all with SN<214999, 6.404D Diesel 400 Series, 6 Cylinder, Block #s R40930, R26060, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17902)$1520.80
Engine Major Overhaul Kit - For 4040, 4230, 6600, 7700, all with SN# 335845>, 6.404D Diesel, 400 Series, 6 cylinder, Block #s R49470, R49650, R59850, R72128, R87552, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17897)$1564.15
Engine Major Overhaul Kit - For model 4320, 4520, 4620, 5440, 644, 644A, 690, 690A, 646, 646B, all with SN<335845, 6.404T A Diesel, 400 Series, 6 cylinder, Block #s R43310, R45980, R47020, R47110, 4.25" bore, 1.61" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 103412)$1385.00
Engine Major Overhaul Kit - For 4320, 4430, 4630, 6600, 5440, 7700, 690B, 693C, 740, all with SN# 335845>, 6.404T A Diesel, 400 Series, 6 cylinder, Block #s R49470, R49650, R59850, R72128, R87558, 4.25" bore, 1.61" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17892)$1709.45
Engine Major Overhaul Kit - For (4440, 4640, 4840, 5720, 6620, 7720, 8430, 8440, 8450, 8820, 9940, all with 6.466T SN<253372, & 6.466A SN# <233592), (644D, 762A, 740A, 646A, all with 6.466D), all with 400 Series 6 cylinder, C R R57303, R67320, 4.56" bore, 1.85" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG18845)$1898.58
Engine Major Overhaul Kit - For (4250, 4440, 4450, 4640, 4650, 5460, 5720, 5730, 6602, 6620, 6622, 7720, 9940, 9950, with 6.466T SN# 253373>, & 6.466A SN# 317859>, 6 cylinder), (644C, 690C, 762A, 762B, 770A, 770B, 790D, 892D, 850B, with 6.466T SN# 253373>, & 6.466A SN# 317859>, 6.466A 6 cylinder), all with 400 Series, SBSN 70601>, Conn Rod: R71071, 4.56" bore, 1.85" Pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 130711)$1350.00
Engine Major Overhaul Kit - For 4840, 4850, 5720, 5730, 8430, 8440, 8450, 8820, 9940, 9950, 644C, 690C, 762A, 762B, 770A, 770B, 850B, 892D, JD740A, all with SN# 233593-317858, 6.466A, 6 cylinder, 400 Series, Conn Rod R71074, 4.56" bore, 1.85" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG20142)$1878.98
Engine Major Overhaul Kit - For 4755, 4755, 4760, 4955, 4960, 644E, 644ER, 740E, 740G, 748E, 748G, all with SN# <499999, 6076T, 6076A, 6076H, Diesel, 400 Series, 6 Cylinder, Conn Rod R71074, 4.56" bore, 1.85" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE60299)$1748.96
Engine Major Overhaul Kit - For 4055, 4255, 4455, 4555, 4560, 4755, 4760, 7700, 1185, 7800, 8100, 8200, 8300, 9500, 9600, 9960, 9965, 664E, 644ER, 740E, 740G, 748E, 748G, 770B, 770BH, 772B, 772BH, 792D, 792lC, 850C, 892E, 892lC, all with SN500000, 6.076T, 60.76A, 6.076, Diesel, 400 Series, 6 Cylinder, Conn Rod R71074, 4.56" bore, 1.85" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE64212)$2132.10
Engine Major Overhaul Kit - For 644B, 646B, 770, 770A, 772A, all with 6.531T Diesel, 500 Series, 6 cylinder, Block #s R48260, R72129, R80401, CR: R48315, R53287, R58883, R66926, 4.75" bore, 1.875 pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 130720)$2275.00
Engine Major Overhaul Kit - For tractor models 5210, 5310, 5410, 5415, 5510, 5615, 5715, 6010, 6110, 6510, 6610, 210LE, 310E, 310SE, 450H, 485E, 486E, 488E, 550H, 650H, all with 4.5Dm 4, 5T Diesel, 4.5L OEM, Power Tech Engine, Piston marked RE59279, 4.19" bore, 1.4" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard or .010, Thrust Bearing Size of Standard or.010, Connecting Rod Bearing Size of Standard or .010. (Part No: RE66092)$1094.20
Engine Major Overhaul Kit - For 4890, 5210, 5310, 5310N, 5410, 5510, 5510N, 5415, 5615, 5715, 6700, 310E, 310SE, 315SE, 344H, 410E, 450H, 550H, 650H, all with 4.5D or 4.5T, Diesel, 4.5L OEM, Power Tech Engine, Piston Marked RE59277, 4.19" bore, 1.4" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE66093)$1091.91
Engine Major Overhaul Kit - For 6010, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6510, 6510L, 6510S, 6605, 6610, 450G, 455G, 550G, 555G, 650G, 120, all with 4.5D or 4.5T Diesel, 4.5L OEM, Power Tech Engine, Piston Marked RE55512, bore 4.19", 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE66094)$497.82
Engine Major Overhaul Kit - For 6700, 7445, 7455, 9935, 670C, 670CH, 672CH, all with 6.8D or 6.8T, Diesel, 6.8L OEM, Power Tech Engine, Piston Marked RE59277, 4.19" bore, 1.4" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE66096)$1515.45
Engine Major Overhaul Kit - For 4700 Sprayer, 7210, 7405, 7410, 7510, 7610, 7710, 7810, 9400, 9410, 200LL, 200LC, 230LC, 270LC, 540G, 540GLL, 544H, 544HLL, 548G, 624H, 624HLL, TC624H, 640G, 643G, 648G, 698G, 670C, 670CH, 672CH, 843G, 850G, TC544H, all with 6.8D or 6.8T, Diesel, Engine Code 4810, 6.8L OEM, Power Tech Engine, Piston marked RE55512, 4.19" bore, 1.62" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RE66097)$1528.92
Engine Major Overhaul Kit, 135 CID Gas - This engine overhaul kit is for 1020 Gas with SN<162078, 300 Crawler & 350 Wheel Tractor, all early models, all with 135 CID, 3 cylinder, 3.86" bore, 3 ring pistons. VERIFY YOUR SLEEVE SEAL O-RING GROOVES ARE IN THE LINER. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: 173370)$1026.70
Engine Major Overhaul Set - for engine 4.202 Diesel, 300 Series. 4 Cyl. O-Rings in block. Block #: R53230, R53250, R55034, R72973, T32342 30mm. Standard bore 3.86� (98mm). Piston Pin: 1.185� (30mm). Kit includes: Piston Liner Kit, Main Bearing, Thrust Bearing, Connecting Rod Bearing Set, Connecting Rod Bushing, Connecting Rod Capscrew, Balancer Shaft Bushing, and Overhaul Gasket Set with Seals. Fits John Deere models: 400, 480, 440, 2020, and 2510. (Part No: 103360)$745.00
Engine Overhaul Kit - For 3010 Gas with block #R26150, R33190, R40840, R49510. , 201 CID, 4 cylinder Overbore 4" to 4-3 16", 5 ring pistons. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, or .020, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK243)$1226.93
Engine Overhaul Kit - For 3010 Diesel with block numbers R40910, R46350, R46430 Only. 4 Cylinder - 5 Ring Piston, 254 CID. Engine Overhaul Kit inludes sleeves and sleeve seals, pistons and rings, pins (1 3 16" O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, intake and exhaust valves, valve retainers and springs, main bearings and connecting rod bearins. Main and Rod bearings available in Standard, .010", .020", and.030" undersize. Specify bearing sizes when ordering. Kit also available with out bearings as part #EOK3431-5-LCB. (Part No: EOK3431-5)$1018.13
Engine Overhaul Kit, 152 Diesel - For 820, 830, 1020, 1030, all SN# 154766>, 300B, 301A, 200, 200A, 350A, 350B, 380 all SN# 154766>, all with 3.152 Diesel, 300 Series, with block numbers R53240, R55100, R72967, T32339, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: piston liner kit, pin bushings, crank seals, gasket overhaul set. YTO OK3591 (Part No: 130650)$560.00
Engine Overhaul Kit with Crankshaft - For 1020 diesel, 3 cylinder 152 CID. To engine serial number 154765. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The early production of this engine has grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed with replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Part No: 183965)		$1433.44
Engine Overhaul Kit with Crankshaft - For 1020 diesel, 3 cylinder 152 CID. From engine serial number 154766. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The late production of this engine does NOT have grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed with replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Part No: 183963)		$1433.44
Engine Overhaul Kit with Crankshaft - For 3 cylinder 164 CID Diesel. Up to engine serial number 160309. O-Ring Grooved Sleeves. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The early production of this engine has grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Part No: 183928)		$1308.83
Engine Overhaul Kit with Crankshaft - For 3 cylinder 164 CID Diesel. 1520 From engine serial number 160310. 1530 From engine no. 178601 to 179600 only. 1 3 16 inch Piston Pin. Plain Liner. NO Grooves. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The late production of this engine has NO grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Part No: 183968)		$1374.27
Engine Overhaul Kit with Crankshaft - For 3 cylinder 164 CID Diesel. Engine serial number 179601 to 349999. 1 3 8 inch Piston Pin. Plain Liner. NO Grooves. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The late production of this engine has NO grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Part No: 183970)		$1308.83
Engine Overhaul Kit with Crankshaft - For 3 cylinder 179 CID Diesel. Engine serial number 350000 and up. 1 3 8 inch Piston Pin. Plain Liner. NO Grooves. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The late production of this engine has NO grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Part No: 183973)		$1299.99
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-202 Diesel Engine 2020 Up to engine serial number 156883, 2510 Up to engine serial number 158257, 2510 Blocks with block numbers T23406, T24961 and T26933. 'O' Ring grooves ON LINER. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The early production of this engine has grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: EKMC58)$1359.30
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-202 Diesel Engine serial number 156884 and up, with block numbers T32342, T53250 and T55034 Only. 4 Cylinder, 202 CID. Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins (1 3 16 inch O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: 183995)		$1441.19
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-219D 4 Cylinder Diesel, 4.016 inch Bore. 2520 Up to engine serial number 157575 Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins (1 3 16 inch O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. O-ring groove is on the sleeve. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: 183999)		$1492.66
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-219D 4 Cylinder Diesel, 4.016 inch Bore. 2520 From engine serial number 157576, 2030 Up to engine serial number 275484. Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins (1 3 16 inch O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. NO O-ring groove on the sleeve. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: EKMC61)$1228.20
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-219D 4 Cylinder Diesel, 4.016 inch Bore. 2030 From engine serial number 275485 and all 2440. Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins (1 3 8 inch O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. NO O-ring groove on the sleeve. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: 185207)$1500.00
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-239D 4 Cylinder Diesel, 4.193 inch Bore. John Deere 2350, 2450, 2550. Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. This engine uses two different crankshafts. Up to engine serial number 155860 it is the short nose 1.40 inches. From engine serial number 155861 it is the long 2.36 inch nose. Specify in comment section of checkout which crankshaft you need. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: EKMC63)$1472.76
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-239D 4 Cylinder Turbo Diesel, 4.193 inch Bore. John Deere 2350, 2450, 2550. Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. This engine uses two different crankshafts. Up to engine serial number 155860 it is the short nose 1.40 inches. From engine serial number 155861 it is the long 2.36 inch nose. Specify in comment section of checkout which crankshaft you need. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Part No: EKMC64)$1472.46
Engine Rebuild Kit - For John Deere 6359T A Turbo Charged, 6 - Cylinder Diesel Engine. Bore: 4.1929 inches, 1.625 inch piston pin, .375 inch valve stem diameter, 7.720 inch overall liner length, High ring pistons. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Used on John Deere 3255, 4050 (s n 6510-later). (Part No: 130701)		$975.00
Engine Rebuild Kit - For John Deere 6076A (diesel, s n 499999-earlier), 6076T (diesel, s n 499999-earlier). Bore: 4.5625 inches, High ring piston, Helical gears, Right hand side oval oil cooler Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals (Part No: 130710)		$1500.00
Engine Rebuild Kit, 6081, 6090 -
  • For John Deere tractor models 8310, 8320< li>
  • Compatible with John Deere Combine(s) 9560 STS, 9660, 9660 STS, 9680 WTS, 9760 STS< li>
  • Compatible with John Deere Engine(s) 6081, 6090< li>
  • Replaces John Deere OEM number RE529264< li>
  • Kit Includes: All Required Cylinder Kits, Pins, Retainers, Main Bearings, Connecting Rod Bearings, Thrust Bearing, Front Crankshaft Seal, Rear Crankshaft Seal, Overhaul Gasket Set, Cam or Balance Shaft Bushing, Piston Bushings, Injector Grommets, Connecting Rod Bolts< li> < UL> (Part No: 156908)
$4125.00
Engine Rebuild Kit - Less Bearings - This engine kit is used on Yanmar 3TNE84 3 cylinder engines. Standard Bore: 3.30 inches, Stroke: 3.54 inches. Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals. Kit does not include connecting rod or main bearings. (Part No: 130647)$465.00
Engine Rebuild Kit - Less Bearings - Compatible with John Deere Tractor 1520 with engine 160309 and below. Used on 164 CID 3 cylinder diesel. This kit contains pistons sleeves with o-ring grooves, no o-ring groove in the block. 4.0157 inch bore, 1.1875 inch piston pin, 7.720 inch overall sleeve length, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Kit does not include connecting rod or main bearings. (Part No: 130653)		$316.00
Engine Rebuild Kit - Less Bearings - This engine kit is for John Deere Engine) 3029 (diesel, s n 252768-later) 179 CID, Build Code 4809. Used with piston marked RE61467; connecting rod marked R121092, R501072; 32mm pin. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Kit does not include connecting rod, main or thrust bearings. (Part No: 130659)		$610.00
Engine Rebuild Kit - Less Bearings - For John Deere 3029 Power Tech 3 cylinder Diesel. Used on engines with rods marked R501072 and pistons marked RE500210. 32mm pins. (This kit will also work on engines with rods marked R121092 by ordering 6 R80033 connecting rod bolts.) This is for late production with build code 4813. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Bearings sold separately. (Part No: 130661)		$630.00
Engine Rebuild Kit - Less Bearings - Turbocharged, piston code 4808; piston marked RE40557 or RE61270; connecting rod marked R105011 or R501073; 41mm piston pin. For 3029T PowerTech 179 CID 3 Cylinder Turbo Diesel. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Used on John Deere 5400 (s n 261851-later), 5400N. Bearings sold separately (Part No: 130662)		$630.00
Engine Rebuild Kit - Less Bearings - Used on John Deere 4-219D 4 Cylinder Diesel Engine through serial number 157575 and block marked T26933. There are no o-ring grooves in block. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Rod and Main bearings are sold separately. (Part No: 130674)		$770.00
Engine Rebuild Kit - Less Bearings - Used on John Deere Turbocharged Aftercooled 4039T 239 CID (3.9 Liter), .312 inch valve stem diameter, 1.625 inch piston pin, 7.720 inch OAL liners. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. Bearings sold separately. (Part No: 130695)		$925.00
Engine Rebuild Kit - Less Bearings - This kit is for John Deere 6068D PowerTech 414 CID 6 Cylinder Diesel. It is for engines with piston code 4805; piston marked RE59279, RE505101; 1.375" pin and rods marked R123959. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. (Part No: 130721)		$1200.00
Engine Rebuild Kit - Less Bearings - This kit is for John Deere 6068D PowerTech 414 CID 6 Cylinder Diesel. It is for engines with piston code 4805; piston marked RE59279, RE505101; 1.375" pin and rods marked R500000. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals. (Part No: 130722)		$1200.00
Engine Rebuild Kit - Less Bearings - This engine kit is for 6068T, 6068H PowerTech (12 Valve) Diesel Engines with engine codes 4808, 4810, 4815, 4820, 4824, piston marked RE55512, RE505102, RE509540; 1.625 inch pin diameter and Connecting rods marked R114081. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals (Part No: 130725)		$1275.00
Engine Rebuild Kit - Less Bearings - This engine kit is for 6068T, 6068H PowerTech (12 Valve) Diesel Engines with engine codes 4808, 4810, 4815, 4820, 4824, piston marked RE55512, RE505102, RE509540; 1.625 inch pin diameter and Connecting rods marked R500335. Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals (Part No: 130726)		$1275.00
Engine Rebuild Kit - Less Bearings -
  • For John Deere tractor model 7200< li>
  • Compatible with John Deere Harvester(s) 7445 (s n 299999-later), 7450, 9930 (s n 299999-later)< li>
  • Compatible with John Deere Construction & industrial model 540E, 540G, 544E, 544E-H (s n 299999-later), 544G, 548E (s n 396257-later), 548G (s n 701059-earlier), 570B (s n 299999-later), 710C (s n 299999-later), 710D (s n 713822-earlier)< li>
  • Bore: 4.1929"< li>
  • Valve Stem: .312"< li>
  • Piston Pin Diameter: 1.625"< li>
  • Overall Liner Length: 7.720"< li>
  • Includes Rod Bolts< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • Standard Thrust Main Bearing use Item #: 123857< li> < UL> (Part No: 168881)
$690.00
Engine Rebuild Kit - Less Bearings, .010 Pistons - Used on John Deere Tractors 990 (Engine Code: 4TNE84-EJK), 4500 (Engine Code: 4TNE84-JT), 4510 (Engine Code: 4TNE84-EJT), 4600 (Engine Code: 4TNE84-JT), 4610 (Engine Code: 4TNE84-EJT). For Yanmar Engine 4TNE84 diesel. 25mm .010 inch oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals. Kit does not include connecting rod or main bearings. (Part No: 130667)		$600.00
Engine Rebuild Kit - Less Bearings, 113 -
  • For John Deere tractor models 420, 430, 440< li>
  • Compatible with John Deere Engine(s) 113 (gas)< li>
  • Bore: 4.250"< li>
  • Vertical 2 cylinder engine< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106780< li> < UL> (Part No: 130646)
$550.00
Engine Rebuild Kit - Less Bearings - 1.625" Piston Pin, 4045T -
  • For John Deere tractor models 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Engine(s) 4045T (turbo diesel)< li>
  • Bore: 4.1929"< li>
  • .312" valve stem diameter< li>
  • 1.625" piston pin< li>
  • 8.580" overall liner length< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106806< li> < UL> (Part No: 130696)
$1050.00
Engine Rebuild Kit - Less Bearings, 190 -
  • For John Deere tractor model 50< li>
  • Compatible with John Deere Engine(s) 190 (gas)< li>
  • Bore: 4.6875"< li>
  • 4.250" piston compression height< li>
  • Spark plugs in block< li>
  • Dual induction engines< li>
  • Less pan gasket< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 159184< li> < UL> (Part No: 130643)
$790.00
Engine Rebuild Kit - Less Bearings - 2.250" Rod Journals, 100 -
  • For John Deere tractor models M, MC, MT, 320 (s n 320854-earlier)< li>
  • Compatible with John Deere Engine(s) 100 (gas)< li>
  • Bore: 4.000"< li>
  • Vertical 2 cylinder engine< li>
  • 2.250" rod journal diameter< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106780< li> < UL> (Part No: 130644)
$580.00
Engine Rebuild Kit - Less Bearings - 2.500" Rod Journals, 100 -
  • For John Deere tractor models 40, 320 (s n 320855-later), 330< li>
  • Compatible with John Deere Construction & industrial models 40< li>
  • Compatible with John Deere Engine(s) 100 (gas)< li>
  • Bore: 4.000"< li>
  • Vertical 2 cylinder engine< li>
  • 2.500" rod journal diameter< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106780< li> < UL> (Part No: 130645)
$580.00
Engine Rebuild Kit - Less Bearings, 321 -
  • For John Deere tractor models A (s n 584000-later), AO (s n 272000-later), AR (s n 272000-later)< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • Bore: 5.500"< li>
  • Stroke: 6.750"< li>
  • 5.625" piston compression height< li>
  • Less pan gasket< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106734< li> < UL> (Part No: 130640)
$730.00
Engine Rebuild Kit - Less Bearings, 381, 404, 6404D -
  • For John Deere tractor models 4010, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Combine(s) 105 (s n 3001-19000)< li>
  • Compatible with John Deere Construction & industrial models 600 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 381 (diesel), 404 (diesel), 6381D (diesel, s n 64999-earlier), 6404D (diesel, s n 65000-214999)< li>
  • Replaces John Deere Block Casting number R26070, R33180, R34340, R40890, R40900< li>
  • Bore: 4.250"< li>
  • Has weep holes< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106834< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130703)
$975.00
Engine Rebuild Kit - Less Bearings - 4-1/4" Overbore, 381 -
  • For John Deere tractor models 4010, 4020< li>
  • Compatible with John Deere Engine(s) 381 (Diesel, 6 cylinder, engine s n 64999-earlier)< li>
  • Replaces John Deere Block Casting number R26070< li>
  • Overbore: 4-1 4"< li>
  • 5 ring piston< li>
  • Will not work on block # R40930< li>
  • Kit includes: cylinder liners, cylinder liner seals, pistons, piston rings, piston pins, piston pin bushings, retainers, connecting rod bolts, complete gasket set, and crankshaft seals < li> < UL> (Part No: 190126)
$1326.26
Engine Rebuild Kit - Less Bearings, 6076, 6076A, 6076T -
  • For John Deere tractor models 7700, 7800, 8100, 8200, 8300, 8570< li>
  • Compatible with John Deere Combine(s) CTS, 9500, 9600< li>
  • Compatible with John Deere Harvester(s) 6610, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 770B, 770BH, 772B, 772BH, 792DLC, 850C, 892ELC< li>
  • Compatible with John Deere Engine(s) 6076, 6076A, 6076T< li>
  • Replaces John Deere OEM number RE524642, RG27920< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For Standard connecting rod bearing use Item #: 106838< li> < UL> (Part No: 167011)
$1425.00
Engine Rebuild Kit - Less Bearings, 6414T -
  • For John Deere Construction & industrial models 544B, 544D, 624E (engine s n 299999-earlier), 640, 640D (engine s n 299999-earlier), 643 (engine s n 299999-earlier), 648D (engine s n 299999-earlier), 655, 655B (engine s n 299999-earlier), 670, 670A, 670B (engine s n 299999-earlier), 672A, 672B (engine s n 299999-earlier), 690D (engine s n 299999-earlier), 690DR (engine s n 299999-earlier), 693D (engine s n 299999-earlier), 750, 750B (engine s n 299999-earlier), 755, 755A, 755B (engine s n 299999-earlier)< li>
  • Compatible with John Deere Engine(s) 6414T (diesel, turbo)< li>
  • Bore: 4.1929"< li>
  • 1.625" piston pin< li>
  • .375" valve stem diameter< li>
  • 8.580" overall liner length< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106810< li> < UL> (Part No: 130741)
$925.00
Engine Rebuild Kit - Less Bearings, 6466A -
  • For John Deere tractor models 4840, 4850, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 8820< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 644C, 690C, 740A, 762A, 762B, 770A, 770B, 850B, 892< li>
  • Compatible with John Deere Engine(s) 6466A (diesel, aftercooled, s n 233593-317858)< li>
  • Replaces John Deere Block Casting number R71688, R71685, R80481< li>
  • Bore: 4.56"< li>
  • 1.8742" piston pin< li>
  • Piston RE60284< li>
  • Connecting rod R71074< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130715)
$1325.00
Engine Rebuild Kit - Less Bearings - 9 Stud Head, 190 -
  • For John Deere tractor model B (s n 201000-later)< li>
  • Compatible with John Deere Engine(s) 190 (gas)< li>
  • Bore: 4.6875"< li>
  • 4.250" piston compression height< li>
  • 9 stud head< li>
  • Less pan gasket< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 159184< li> < UL> (Part No: 130642)
$830.00
Engine Rebuild Kit - Less Bearings - ESN 157353-earlier, 202 -
  • For John Deere tractor model 2520< li>
  • Compatible with John Deere Combine(s) 3300 (s n 3000-earlier)< li>
  • Compatible with John Deere Engine(s) 202 (gas, s n 157353-earlier)< li>
  • Replaces John Deere Block Casting number T28746< li>
  • Bore: 3.8583"< li>
  • Early< li>
  • No o-ring grooves in block< li>
  • 7.720" overall liner length< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106798< li> < UL> (Part No: 130678)
$1725.00
Engine Rebuild Kit - Less Bearings - ESN 200000-later - Rod R535555, 6081 -
  • For John Deere tractor models 7710, 7810, 7820, 7920, 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8520, 8520T< li>
  • Compatible with John Deere Engine(s) 6081 (Powertech diesel, s n 200000-later, Build Codes 4801, 4803)< li>
  • Bore: 4.56"< li>
  • 1.8742" piston pin< li>
  • OE piston # RE70688< li>
  • Connecting rod # R535555< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard thrust bearing use Item #: 124034< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130639)
$2175.00
Engine Rebuild Kit - Less Bearings - ESN 215000-335845, 404, 6404D -
  • For John Deere tractor models 4000, 4020 (s n 201000-later)< li>
  • Compatible with John Deere Combine(s) 105 (s n 19000-later), 6602 (s n 1500-earlier), 7700 (s n 8000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 600 (s n 200999-later)< li>
  • Compatible with John Deere Engine(s) 404 (diesel, s n 215000-335845), 6404D (diesel, s n 215000-335845)< li>
  • Replaces John Deere Block Casting number R40610, R40620, R45950, R47170, R48440< li>
  • Bore: 4.250"< li>
  • Water pump bolts to head< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130631)
$1425.00
Engine Rebuild Kit - Less Bearings - ESN 215000-335845 - High Compression, 6404A, 6404T -
  • For John Deere tractor models 4320, 4520, 4620, 7020 (early)< li>
  • Compatible with John Deere Harvester(s) 5200 (early)< li>
  • Compatible with John Deere Construction & industrial models 644, 644A, 646, 690, 690A< li>
  • Compatible with John Deere Engine(s) 6404A (diesel, s n 215000-335845), 6404T (diesel, s n 215000-335845)< li>
  • Replaces John Deere Block Casting number R43310, R45980, R47020, R47110< li>
  • Bore: 4.250"< li>
  • External tube type oil cooler< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130634)
$1825.00
Engine Rebuild Kit - Less Bearings - ESN 86535-earlier, 6081, 6081T -
  • For John Deere tractor models 7710, 7810 (s n 89999-earlier), 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 9100< li>
  • Compatible with John Deere Combine(s) 9510, 9550 (s n 700200-earlier), 9550 SH (s n 700700-earlier)< li>
  • Compatible with John Deere Harvester(s) 9970 (mid)< li>
  • Compatible with John Deere Construction & industrial models 370, 530B, 535, 560D, 644G, 644H, 660D, 748G, 848G< li>
  • Compatible with John Deere Engine(s) 6081 (Powertech diesel, s n 86535-earlier), 6081T (Powertech diesel, s n 86535-earlier)< li>
  • Bore: 4.5625"< li>
  • With rod bolts< li>
  • Pan gasket for crawlers and graders< li>
  • For use with connecting rod marked R116340< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard thrust bearing use Item #: 124032< li> < UL> (Part No: 130730)
$973.00
Engine Rebuild Kit - Less Bearings - ESN 86536-earlier - Rod R116340, 6081 -
  • For John Deere tractor models 7710, 7810, 7820, 7920, 8100, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 9100< li>
  • Compatible with John Deere Combine(s) 2256, 2258, 2264, 2266, 9510, 9510 SH, 9550, 9550 SH, 9560 WTS, 9580 WTS, 9640 WTS< li>
  • Compatible with John Deere Harvester(s) 9970< li>
  • Compatible with John Deere Engine(s) 6081 (diesel, s n 86536-earlier)< li>
  • Bore: 4.56"< li>
  • 1.8742" piston pin< li>
  • For use with rod marked R116340< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard rod bearing use Item #: 124035< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130637)
$1925.00
Engine Rebuild Kit - Less Bearings - ESN 86537-199999 - Rod R501034, 6081 -
  • For John Deere tractor models 7710, 7810, 7820, 7920, 8100, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 9100< li>
  • Compatible with John Deere Combine(s) 2256, 2258, 2264, 2266, 9510, 9510 SH, 9550, 9550 SH, 9560 WTS, 9580 WTS, 9640 WTS< li>
  • Compatible with John Deere Harvester(s) 9970< li>
  • Compatible with John Deere Engine(s) 6081 (diesel, s n 86537-199999, Build Codes 4801, 4803)< li>
  • Bore: 4.56"< li>
  • 1.8742" piston pin< li>
  • For use with fractured split rod marked R501034< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard rod bearing use Item #: 124035< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130638)
$1900.00
Engine Rebuild Kit - Less Bearings - Fractured Rod R500000, 6068T -
  • For John Deere tractor model 6603< li>
  • Compatible with John Deere Harvester(s) 7455, 7460, 9935< li>
  • Compatible with John Deere Engine(s) 6068T (turbo diesel)< li>
  • Bore: 4.19"< li>
  • 1.3750" piston pin< li>
  • With piston RE59277 or RE505100< li>
  • For use with fractured split connecting rod marked R500000< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard thrust bearing use Item #: 156337< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130724)
$1200.00
Engine Rebuild Kit - Less Bearings - Fractured Rod R500335, 4045T -
  • For John Deere tractor models 6010, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6510L, 6605, 6610< li>
  • Compatible with John Deere Construction & industrial models 120, 444H, 555G, 650G< li>
  • Compatible with John Deere Engine(s) 4045T (turbo diesel)< li>
  • Bore: 4.19"< li>
  • 1.6250" piston pin< li>
  • With piston RE55512 or RE505102< li>
  • For use with fractured split connecting rod marked R500335< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard thrust bearing use Item #: 156337< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130694)
$760.00
Engine Rebuild Kit - Less Bearings - High Compression, 6404A/T, 6404A -
  • For John Deere tractor models 4430, 4630, 7020 (late)< li>
  • Compatible with John Deere Combine(s) 6600 SH (s n 305672-later), 6602 (s n 163500-later), 7700 (s n 8000-later)< li>
  • Compatible with John Deere Harvester(s) 5200 (late), 5440< li>
  • Compatible with John Deere Construction & industrial models 690B, 693B, 740< li>
  • Compatible with John Deere Engine(s) 6404A (diesel, s n 335846-later), 6404T (diesel, s n 335846-later)< li>
  • Replaces John Deere Block Casting number R49470, R49650, R59850, R72128, R87558< li>
  • Bore: 4.250"< li>
  • Internal plate type oil cooler< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130635)
$1475.00
Engine Rebuild Kit - Less Bearings - High Compression, 6404D -
  • For John Deere tractor models 4040, 4230< li>
  • Compatible with John Deere Combine(s) 6600 (s n 156500-later), 6602 (s n 1501-later), 7700 (s n 8001-later)< li>
  • Compatible with John Deere Engine(s) 404 (diesel, s n 335846-later), 6404D (diesel, s n 335846-later)< li>
  • Replaces John Deere Block Casting number R49470, R49650, R59850, R72128, R87558< li>
  • Bore: 4.250"< li>
  • Water pump bolts to block< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130632)
$1425.00
Engine Rebuild Kit - Less Bearings - High Compression Pistons - Early, 254 -
  • For John Deere tractor models 3010, 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A (s n 123113-earlier)< li>
  • Compatible with John Deere Engine(s) 254 (diesel, s n 49999-earlier), 270 (diesel, s n 50000-124999)< li>
  • Replaces John Deere Block Casting number R26160, R32020, R40850< li>
  • Bore: 4.250"< li>
  • Has weep holes< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106819< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130628)
$950.00
Engine Rebuild Kit - Less Bearings - High Compression Pistons - Late, 270 -
  • For John Deere tractor model 3020 (s n 123000-later)< li>
  • Compatible with John Deere Construction & industrial model 500A (s n 123114-later), 500B, 500C, 510< li>
  • Compatible with John Deere Engine(s) 270 (diesel, s n 125000-later)< li>
  • Replaces John Deere Block Casting number R40700, R47520, R48430, R50610, R72127< li>
  • Bore: 4.250"< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106823< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130629)
$975.00
Engine Rebuild Kit - Less Bearings - Low Ring Piston, 6076A, 6076T -
  • For John Deere tractor models 4955, 4960, 8560 (early)< li>
  • Compatible with John Deere Engine(s) 6076A (diesel, s n 499999-earlier), 6076T (diesel, s n 499999-earlier)< li>
  • Bore: 4.5625"< li>
  • Low ring piston< li>
  • Helical gears< li>
  • Right hand side oval oil cooler< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130716)
$1425.00
Engine Rebuild Kit - Less Bearings - Machined Rod R114081, 4045T -
  • For John Deere tractor models 6010, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6510L, 6605, 6610< li>
  • Compatible with John Deere Construction & industrial models 120, 444H, 555G, 650G< li>
  • Compatible with John Deere Engine(s) 4045T (turbo diesel)< li>
  • Bore: 4.19"< li>
  • 1.6250" piston pin< li>
  • With piston RE55512 or RE505102< li>
  • For use with machined connecting rod marked R114081< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard thrust bearing use Item #: 156337< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130693)
$760.00
Engine Rebuild Kit - Less Bearings - Machined Rod R123959, 6068T -
  • For John Deere tractor model 6603< li>
  • Compatible with John Deere Harvester(s) 7455, 7460, 9935< li>
  • Compatible with John Deere Engine(s) 6068T (turbo diesel)< li>
  • Bore: 4.19"< li>
  • 1.3750" piston pin< li>
  • With piston RE59277 or RE505100< li>
  • For use with machined connecting rod marked R123959< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard thrust bearing use Item #: 156337< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130723)
$1200.00
Engine Rebuild Kit - Less Bearings - Rod R57303 - High Compression, 6466A, 6466T -
  • For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450 (early)< li>
  • Compatible with John Deere Combine(s) 6602 (s n 163500-later), 6620 (early), 6622 (early), 7720 (early), 8820 (early)< li>
  • Compatible with John Deere Harvester(s) 5720 (early), 9940 (early)< li>
  • Compatible with John Deere Construction & industrial models 644A (early), 646C (early), 740A (early), 743, 743A, 762A (early)< li>
  • Compatible with John Deere Engine(s) 6466A (diesel), 6466T (diesel)< li>
  • Bore: 4.5625"< li>
  • Connecting rod marked R57303, R67320< li>
  • Tapered pin bushing< li>
  • 1.875" piston pin< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bolts and Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130636)
$1800.00
Engine Rebuild Kit - Less Bearings - Rod R71074 - High Compression, 6466A, 6466T -
  • For John Deere tractor models 4250, 4450, 4650, 4850, 8450< li>
  • Compatible with John Deere Combine(s) 6620 (late), 6622 (late), 7720 (late), 7722 (late), 8820 (late)< li>
  • Compatible with John Deere Harvester(s) 5720 (late), 5730 (late), 9940 (late), 9950 (late)< li>
  • Compatible with John Deere Construction & industrial models 644C (late), 644D (late), 646C (late), 690C, 693C (late), 740A (late), 743A (late), 762A (late), 762B (s n 818908-earlier), 770A (late), 770AH (late), 770B (early), 770BH (early), 772A (late), 772AH (late), 772BH (early), 790, 790D, 792, 850B< li>
  • Compatible with John Deere Engine(s) 6466A (diesel), 6466T (diesel)< li>
  • Bore: 4.5625"< li>
  • Connecting rod marked R71074< li>
  • Stepped-tapered pin bushing< li>
  • 1.875" piston pin< li>
  • Kit includes: High Compression Easy Start Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • High Compression Easy Start pistons are produced from an aluminum hypereutectic alloy. This allows the pistons to: Retain a higher percentage of strength and hardness during normal operations, Have a very low coefficient of thermal expansion, Have a higher resistance to wear, Have a higher tensile strength. The combustion bowls in these pistons are engineered to create higher compression. These pistons raise the static compression of an engine approximately 1-1.5 points. They ignite a larger ratio of fuel air per stroke, which wastes less raw fuel. This translates into: Improved cold weather starting, Increased horsepower, Extended engine life< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106838< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 130633)
$1800.00
Engine Rebuild Kit - Less Bearings - Spark Plugs in Block, 321 -
  • For John Deere tractor model 60< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • Bore: 5.500"< li>
  • Stroke: 6.750"< li>
  • 5.625" piston compression height< li>
  • Spark plugs in block< li>
  • Less pan gasket< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106734< li> < UL> (Part No: 130641)
$890.00
Engine Rebuild Kit - Less Bearings, Standard Pistons - Used on John Deere Tractors 990 (Engine Code: 4TNE84-EJK), 4500 (Engine Code: 4TNE84-JT), 4510 (Engine Code: 4TNE84-EJT), 4600 (Engine Code: 4TNE84-JT), 4610 (Engine Code: 4TNE84-EJT). For Yanmar Engine 4TNE84 diesel. Standard Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals. Kit does not include connecting rod or main bearings. (Part No: 130666)		$580.00
Finished Piston Liner -
  • For John Deere tractor models 1445F, 1630, 1640 (s n 430000-later), 1745F, 1845F, 2040 (s n 430000-later), 2040S (s n 430000-later), 2130, 2140 (s n 430000-later), 2150, 2240 (s n 349999-earlier), 2255, 2350, 2355N, 2550, 2750, 2755, 2855N, 2950, 2955 (s n 767516-earlier), 3030, 3040 (s n 430000-later), 3130, 3140 (s n 430000-later), 3155, 5600, 5700, 6300, 6500, 6600< li>
  • Compatible with John Deere Combine(s) 925, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1085 (s n 689245-later), 1133, 1144, 1155, 1165 (s n 45000-earlier), 1165, 1166, 1174, 1174H4, 1175 (s n 45025-earlier), 1175, 1175H4 (s n 45025-earlier), 1175H4, 1177, 4425, 6300, 7300, 7500< li>
  • Compatible with John Deere Harvester(s) 7445, 9930< li>
  • Compatible with John Deere Construction & industrial models 350D, 355D, 4400, 4500< li>
  • Compatible with John Deere Engine(s) 3029, 3179, 4239, 6059, 6068, 6359< li>
  • Compatible with John Deere Hay Cutting(s) 2360< li>
  • Replaces John Deere OEM number R80724< li>
  • Inside Diameter: 106.50 mm< li>
  • Bottom Diameter: 115.70 mm< li>
  • Length: 197.05 mm< li>
  • Top Diameter: 125.99< li>
  • Top Lip Thickness: 6.05 mm< li>
  • Lip to Top Thickness: .89 mm< li> < UL> (Part No: 168455)
$27.50
In Frame Engine Overhaul Kit -
  • For John Deere tractor models 4050, 4240< li>
  • Engine 6-466 diesel< li>
  • Contains Cylinder Kits, Rod Bearings, Main Bearing Set, Head Gasket Set, Oil Pan Gasket and Rod Bolts< li> < UL> (Part No: 103403)
$1650.00
In Frame Engine Overhaul Kit -
  • For John Deere tractor models 820 (s n 075001-later with 3.152D engine), 830 (s n 154766-later with 3.152D engine), 1020 (s n 154766-later with 3.152D engine), 1030 (s n 154766-later with 3.152D engine)< li>
  • Compatible with John Deere Construction & industrial models 300 (s n 154766-later with 3.152 engine), 300A (s n 154766-later with 3.152 engine), 300B (s n 154766-later with 3.152 engine), 301A (s n 154766-later with 3.152 engine), 350A (s n 154766-later with 3.152 engine), 350B (s n 154766-later with 3.152 engine), 380 (s n 154766-later with 3.152 engine)< li>
  • Replaces John Deere OEM number AR71591, RE27348, RE27349, RE27358, RE27364, R74194, RE38848, R97341< li>
  • Replaces John Deere Casting number R53240, R55100, R72967, T32339< li>
  • Kit Includes: (3) AR71591 Liners, (3 Pairs) RE27348 Standard Bearings, (3 Pairs) RE27349 .010 Bearings, (3 Pairs) RE27358 .020" Bearings, (3 Pairs) RE27364 .030" Bearings, (6) R74194 Cap Screws, (1) Upper Gasket Set, and (1) Oil Pan Gasket< li>
  • Bore: 3.86"< li>
  • Pin: 1.185"< li> < UL> (Part No: 181733)
$730.00
In-Frame Overhaul Kit - Contains sleeves, pistons, rings, pins, pin bushings, and overhaul gasket set with crankshaft seals. For tractor models 6205, 6210, 6215, 6310, 6405, 6410, 6415. With 4.5T Diesel Power tech Engines. (Part No: BEKD45TPT-LCB)$1213.30
In-Frame Overhaul Kit - Includes sleeve kits, rod and main bearings (with thrust washers), full gaskit kit (no crankshaft seals) and rod bolts. For JD 6505, 6610, 7210, 7405, 7410, 7420, 7500, 7510, 7520, 7610 model tractors. With 6.8T Diesel Power tech Engines. (Part No: BEKD68TPT-LCB)$1692.16
Major Engine Overhaul Kit - For tractor models 1530, 2040, 2330, 301A, 350C, 302, 350D, 302A, 310, 350B, all with serial number 179602>, 3.164D Diesel, 300 Series, large pin, 3 cylinder, 4.02 inch bore, 1.375 inch pin. Engine Major Overhaul Kit includes: piston liner kit, main bearings set, crank seals, connecting rod bearings bushings bolts set, gasket overhaul set. When ordering, specify in comments main bearing size of standard, .010, .020 or .030, thrust bearing size of standard, .010, .020 or .030, connecting rod bearing size of standard, .010, .020 or .030. (Part No: OK3041)$356.26
Major Engine Overhaul Kit - Less Seals, 4276 -
  • For John Deere tractor models 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 410C< li>
  • Compatible with John Deere Engine(s) 4276 (D, Diesel, 300 Series)< li>
  • Replaces John Deere OEM number AT86990< li>
  • Contains: Piston liner kit, main bearing, thrust bearing, connecting rod bearing, connecting rod bushing, connecting rod cap screw, balancer shaft bushing, front & rear crankshaft seals, and overhaul gasket set without seals< li>
  • 4 cylinder< li>
  • Bore: 4.19"< li>
  • Pin: 1.37"< li> < UL> (Part No: 172702)
$1189.40
Overhaul Kit - Engine overhaul kit, less bearings. For 3010 diesel, 4 cylinder 254 CID. Use with block number R26160 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, For 3010 (Part No: EOK1431-LCB)$1040.23
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK1431A-LCB)$1041.94
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 & R40840 only. 4-Cylinder Gas, 227 CID. 4-1 4" Standard Bore. 4-Ring Piston. Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 3020 Series. (Part No: EOK1432-LCB)		$835.19
Overhaul Kit - Engine overhaul kit, less bearings. For 4020 gas, 6 cyl. 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, cranks For 4020. KIT ALSO AVAILABLE WITH BEARINGS AT STD, .010 AND .020. CALL FOR PRICE. (Part No: EOK1434-LCB)		$1235.80
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valve For 3020 (Part No: EOK1436-LCB)$930.62
Overhaul Kit - Engine overhaul kit, less bearings. For 4010 gas, 6 cylinder 301 CID. Use with blocks except numbers R40940, R49550 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, intake & For 4010 (Part No: EOK1440-LCB)$1330.97
Overhaul Kit - Engine overhaul kit, less bearings. For 4010 diesel, 6 cylinder 381 CID. Use with blocks except number R40930. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 4010 (Part No: EOK1441-LCB)		$1411.49
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valve For 3020 (Part No: EOK2703-LCB)$1196.07
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK3431A3-LCB)$1102.27
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK3431A5-LCB)$929.32
Overhaul Kit - Engine overhaul kit, less bearings. For 4010 diesel, 6 cylinder 381 CID. Use with blocks except number R40930. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seal For 4010 (Part No: EOK4441-3-LCB)$1373.85
Overhaul Kit - Keystone Top Compression Ring For 4020 (Part No: EOK4441A3-LCB)$1483.75
Overhaul Kit - Engine overhaul kit, less bearings. For 2020, 2510 gas, 4 cylinder 180 CID. Use with block numbers: T23405, T24960, T26932 only. Kit contains sleeves & sleeve seals (block uses 3 sealing rings-2 grooves on sleeves), pistons & rings, pins & retainers, pin bushings For 2020, 2510 (Part No: EOK4444-LCB)$1003.45
Overhaul Kit - Engine overhaul kit, less bearings. For 2510 gas, 4 cylinder 180 CID. Use with block number T32349 only. Kit contains sleeves & sleeve seals (block uses 3 sealing rings-0 grooves on sleeves), pistons & rings, pins & retainers, pin bushings complete gasket For 2020, 2510 (Part No: EOK4445-LCB)$1130.65
Overhaul Kit - Engine overhaul kit, less bearings. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 & up. Kit contains sleeves & sleeve seals (block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers, pin bushings complete gasket set, c For 2520 (Part No: EOK4446-LCB)$819.45
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals(block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers(1-3 16 outside diameter pins), pin bushings, complete gasket set, intake & exhaust valves, crankshaft For 1530 (Part No: EOK4450-LCB)$652.39
Overhaul Kit - Engine overhaul kit, less brgs. For 2510 diesel, 4 cyl. 202 CID. Use with block numbers: T23406, T24961, T26933 only. Kit contains sleeves & sleeve seals(block uses 3 sealing rings-2 grooves on sleeves), pistons & rings, pins & retainers(1-3 16 O.D. pins) For 2020, 2510 (Part No: EOK4451-LCB)$907.92
Overhaul Kit - Engine overhaul kit, less brgs. For 2510 diesel, 4 cyl. 202 CID. Use with block numbers: T32342, R53250, R55034 only. Kit contains sleeves & sleeve seals(block uses 3 sealing rings- no grooves on sleeves), pistons & rings, pins & retainers (1 -3 16 O.D. pi For 2020, 2510 (Part No: EOK4452-LCB)$967.71
Overhaul Kit - Engine overhaul kit, less bearings. For 2520 diesel, 4 cyl. 219 CID. Engine SN# 157576 & up. Kit contains sleeves & sleeve seals (block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers (1-3 16 O.D. pins), pin bushings comple For 2030, 2520 (Part No: EOK4453-LCB)$669.20
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals(block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers(1-3 16 outside diameter pins), pin bushings, complete gasket set, crankshaft seals, intake & exhaust v For 2030 (Part No: EOK4454-LCB)$922.25
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals(block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers(1-3 16 outside diameter pins), pin bushings, complete gasket set, crankshaft seals, intake & exhaust For 4030 (Part No: EOK4455-LCB)$1333.70
Overhaul Kit - Engine overhaul kit, less bearings. For 3010 diesel, 4 cylinder 254 CID. Use with block numbers R40910, R46350, R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, c For 3010 (Part No: EOK4470-LCB)$1198.46
Overhaul Kit - Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK4471-LCB)$1301.99
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, intake & exhaust valves, valve caps, retainers & springs. Order engine bearings separately. For 1530, 2040 (Part No: EOK4475-LCB)$719.74
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals(block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers(1-3 8 outside diameter pins), pin bushings, complete gasket set, crankshaft seals, intake & exhaust va For 2030, 2440 (Part No: EOK4476-LCB)$1012.06
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals(block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers(1-3 8 outside diameter pins), pin bushings, complete gasket set, crankshaft seals, intake & exhaust va For 2840, 4030 (Part No: EOK4477-LCB)$1468.40
Overhaul Kit - Overhaul Kit For 2350, 2355, 2550, 2555 (Part No: EOKD4461-LCB)$925.19
Overhaul Kit - Overhaul Kit. For tractor models 2555, 2750, 2755. (Part No: EOKD4462-LCB)$1031.61
Overhaul Kit - Engine overhaul kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, intake & exhaust valves, valve caps, retainers & springs. Order engine bearings separately. For 276 For 2630, 2640 (Part No: EOKD4463-LCB)$999.26
Overhaul Kit - Overhaul Kit For 2940, 2950, 2955. If you need bearings, please order separately. (Part No: EOKD4465-LCB)		$1288.34
Overhaul Kit - Overhaul Kit for 179 CID 3 cyl. diesel engine, 4.19" standard bore, 3 ring piston. Contains Pistons, Piston Rings, Sleeves, Piston Pins, Pin Retainers, Overhaul Gasket Set, Valves, Valve Springs, Valve Guides and retainers. Does not include main or rod bearings. For tractor models (2040, 2240 SN# 350000 and up), 2150, 2255. (Part No: EOKD4478-LCB)$618.57
Overhaul Kit - 6-Cylinder Diesel, 404 CID. 4-1 4" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring. Block #'s R33180, R34340, R40890 and R40900 ONLY.Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 4020 Series. (Part No: EOK1441A-LCB)		$1413.95
Overhaul Kit, 135 CID Gas, Less Bearings - Engine overhaul kit, less bearings. For 1020 gas, 3 cylinder 135 CID. Basic engine kit, less bearings. For 1020 gas, 3 cylinder 135 CID. For engine SN# 162079 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, piston liner seals, intake and exhaust valves, valves springs, valves guides and valve locks. Order bearings separately. (Part No: EOK4443-LCB)$883.95
Overhaul Kit, 152 CID Diesel, Less Bearings - Engine overhaul kit, less brgs. For 1020 diesel, 3 cylinder 152 CID. To engine SN# 154765. Kit contains sleeves & sleeve seals (block uses 3 sealing rings-2 grooves on sleeves), pistons & rings, pins & retainers (1-3 16 O.D. pins), pin bushings, complete For 1020 (Part No: EOK4447-LCB)$718.50
Overhaul Kit, 152 CID Diesel, Less Bearings - Engine overhaul kit, less brgs. For 1020 diesel, 3 cylinder 152 CID. Engine SN# 154766 & up. Kit contains sleeves & sleeve seals (block uses 3 sealing rings-no grooves on sleeves), pistons & rings, pins & retainers (1-3 16 O.D. pins), pin bushings, Complete For 1020 (Part No: EOK4448-LCB)$763.35
Piston -
  • For John Deere tractor models 5210, 5310, 5310N, 5320N, 5325N, 5410, 5420, 5420N, 5425, 5425N, 5510, 5510N, 5520, 5520N, 5525, 5525N< li>
  • Compatible with John Deere Construction & industrial models 210LE< li>
  • Compatible with John Deere Engine(s) 4045 (DF270), 4045 (TF270)< li>
  • Replaces John Deere OEM number RE515372< li>
  • Fits John Deere Engine(s) CD PE404HF275, CD PE4045TF275, PE6068HF275, PE6068TF275< li> < UL> (Part No: 167916)
$93.00
Piston and Rings -
  • For John Deere tractor model 2010< li>
  • Replaces manufacturer number RK-344< li> < UL> (Part No: 174110)
$171.30
Piston Liner Kit -
  • For John Deere tractor models 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5400< li>
  • Compatible with John Deere Engine(s) 6531A< li>
  • Replaces John Deere OEM number AR53227< li>
  • Bore: 4.75"< li>
  • Kit includes: cylinder liner, cylinder liner seals, piston, piston rings, piston pins, and retainers< li> < UL> (Part No: 189188)
$394.00
Piston - Standard -
  • For John Deere tractor model 2010< li>
  • Compatible with John Deere Combine(s) 55 (s n 59282-83000), 65 (s n 11601-14000)< li>
  • Compatible with John Deere Engine(s) 145 (gas, mid and late)< li>
  • Compatible with John Deere Hay Cutting(s) 215< li>
  • Replaces John Deere OEM number T12382, 224-1549< li>
  • Bore: 3.625"< li> < UL> (Part No: 128591)
$114.00
Rebore Kit - Piston Kit. For tractor models M, 320, 330, and 40. 4 inch bore, .045 oversize. Contains pistons, rings, pins and retainers. (Part No: 185552)		$308.17
Rebore Kit - Piston Kit For M, 320, 330, and 40. 4 inch bore, .090 oversize. Contains (2)pistons, rings, pins, and retainers. (Part No: 185550)		$290.99
Rebore Kit - Piston Kit For 420, 430, 440, 4 1 4 inch bore .045 oversize. Contains pistons, rings, pins, and retainers. (Part No: 184947)		$378.80
Rebore Kit - Piston Kit For 420, 430, 440, 4 1 4 inch bore, .090 oversize. Contains pistons, rings, pins, and retainers. (Part No: 184657)$349.27
Rebore Kit - Piston Kit For 420, 430, 440, 4 1 4 inch bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1977)$310.50
Rebore Kit - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore STANDARD. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750 inch. (Part No: R2457)		$524.40
Rebore Kit - Piston Kit For A, AH, AN, and AW S#584001 & up, AO and AR S#272001 & up, and 60 5 1 2 inch - Bore STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2027)		$545.10
Rebore Kit - Piston Kit For G, GH, GN, (GW S#13001 & up). Standard 6 1 8 inch bore. Contains pistons, rings, pins, and retainers. (Part No: R2031)		$545.10
Rebore Kit - Piston Kit For G, GH, GN, GW S#13001 & up. 6 1 8 bore inch .090 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1982)		$518.44
Rebore Kit - Piston Kit For L with HERCULES NXB. STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2378)		$240.15
Rebore Kit - Piston Kit For L with HERCULES NXB..060 oversize. Contains pistons, rings, pins, and retainers. (Part No: R2380)		$240.15
Rebore Kit - Piston Kit For 520 and 530. 4 11 16 inch bore.045 oversize. Contains pistons, rings, pins, and retainers. (Part No: R2037)		$407.10
Rebore Kit - Piston Kit For 520 and 530. 4 11 16 inch bore.090 oversize. Contains pistons, rings, pins, and retainers. (Part No: 185300)		$455.89
Rebore Kit - Piston Kit For 520 and 530. 4 11 16 inch bore.125 oversize. Contains pistons, rings, pins, and retainers. (Part No: 185184)		$455.89
Rebore Kit - Piston Kit For Gas 620 and 630. 5 1 2 inch bore.090 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1988)		$545.10
Rebore Kit - Piston Kit For Gas 620 and 630. 5 1 2 inch bore.125 oversize. Contains pistons, rings, pins, and retainers. (Part No: 189290)		$610.30
Rebore Kit - Piston Kit For 420, 430, 440, 4 1 4" bore Standard. Contains pistons, rings, pins, and retainers. (Part No: 186668)$349.27
Rebore Kit, .045 - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore - .045 OVERBORE. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750 inch. (Part No: 184834)		$588.25
Rebore Kit, .045 Overbore - Standard bore 5-7 8". For 70 with Gas Engine. Rebore Kit contains pistons, pins, rings, and retainers. Complete for 1 engine. (Part No: R3740)		$496.12
Rebore Kit, .090 - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore - .090 OVERBORE. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin. (Part No: R2459)		$588.99
Rebore Kit, .125 - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore - .125 OVERBORE. Contains pistons, rings, pins, and retainers. (Part No: 185777)		$588.25
Rebore Kit, .125 Oversize - Piston Kit For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Part No: 185832)		$456.00
Rebore Kit, .125 Oversize - Piston Kit for B, BN, BR, and BW Serial number 60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1 2 inch bore plus .125. Contains Pistons, rings, pins and retainers. (Part No: 184994)$502.22
Rebore Kit, Standard - Piston Kit For B, BN, BR, and BW S#60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1 2 inch bore. Contains pistons, rings, pins and retainers. (Part No: R7353)$448.50
Rebore Kit, Standard - For 70 with Gas Engine, 5 7 8 bore. Rebore Kit contains pistons, pins, rings, and retainers. Complete for 1 engine. (Part No: R3739)		$496.12
Sleeve -
  • For John Deere tractor models 2040, 2940, 4050, 4250, 4450< li>
  • Compatible with John Deere Construction & industrial models 70, 415B, 444D, 490, 515B, 710B, 710C< li>
  • Replaces John Deere OEM number RE500023< li> < UL> (Part No: 167384)
$35.26
Snap Ring -
  • For John Deere tractor models 2140, 2250, 2355N, 2450, 2555, 2650, 2750, 2755, 2850, 2855, 2855N, 3140, 3540, 3550, 4050, 4320, 4430, 4520, 4620, 4630, 5400N, 5500, 5500N, 5700, 6010, 6100, 6110, 6110L, 6200, 6210, 6210L, 6220, 6300, 6310, 6310L, 6400, 6405, 6410, 6410L, 6500, 6500L, 6510, 6510L, 6510S, 6605, 6610, 6800, 6900, 7200, 7210, 7400, 7405, 7410, 7510, 7600, 7610, 7710, 7810< li>
  • Compatible with John Deere Combine(s) 6600, 7700, 9400, 9410< li>
  • Compatible with John Deere Harvester(s) 5440, 7445, 9920, 9930< li>
  • Compatible with John Deere Construction & industrial models 120, 200CLC, 230LC, 270LC, 300D, 310C, 310D, 315C, 315D, 340D, 344E, 344G, 410C, 410D, 440C, 444D, 444E, 444G, 444H, 448D, 450E, 450G, 455E, 455G, 490D, 490E, 493D, 495D, 510B, 510C, 515B, 540D, 540G, 540GII, 544B, 544C, 544D, 544E, 544E-H, 544G, 544H, 544HLL, 548D, 548G, 550A, 550B, 550G, 555A, 555B, 555G, 570B, 590D, 595D, 610B, 610C, 624E, 624HLL, 640, 640D, 640G, 643, 643D, 644, 644A, 644E, 646, 646B, 648D, 648G, 650G, 653, 655, 655B, 670, 670A, 670B, 670C, 670CH, 672, 672A, 672B, 672CH, 690A, 690B, 690D, 693C, 693D, 710B, 710C, 740, 750, 750B, 755, 755A, 755B< li>
  • Compatible with John Deere Hay Cutting(s) 3830< li>
  • Replaces John Deere OEM number R54114< li>
  • Cylinder Kit Snap Ring< li> < UL> (Part No: 176715)
$2.00
Valve Overhaul Kit - Cylinder HEAD Overhaul Kit. Contains intake & exhaust valves, springs, guides, and keys. 1 kit used in 201 CID 4 cylinder gas engine (block # R26150) & 227 CID 4 cylinder gas engine (to SN# 122999). For tractor models 3010, 3020. (Part No: 187186)		$220.60
Valve Overhaul Kit - Cylinder HEAD Overhaul Kit. Contains intake & exhaust valves, springs, guides, and keys. 1 kit used in 254 CID 4 cylinder diesel engine (block numbers R26160, R40910, R46350, R46430 only). For model 3010. (Part No: VOKD254)$220.21
Valve Overhaul Kit - Kit for model H includes valves, springs, guide and valve locks. (Part No: VTKJDH)$177.19
Valve Service Kit - Cylinder HEAD Service KIT. For tractor models (3010, 3020 with 201 or 227 CID 4 cylinder gas engines). Contains: springs, guides, locks, (no valves). (Part No: VSKD227)$76.40
Valve Service Kit - For tractor models (3010, 3020 with 257 or 270 CID 4 cylinder diesel engines). Contains: springs, guides, locks, (no valves). (Part No: VSKD254)$94.01
Valve Train Kit - Kit contains 3 R79623 intake valves, 3 R79624 exhaust valves, 6 R26125 valve springs and 6 1168817 keepers. For tractor models (1020 with 3152D or 3164D engines), (1030, 1120, 1130, 830, 930 all with 3164D engine), (1040, 1140, 1350, 1550, 1630, 1750, 1850, 1850N, 840, 940 all with 3179D engine). (Part No: 172849)$94.00
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (A from SN# 488000 and up), (AO, AR from SN# 260000 and up), 60. (Part No: VTKJD60)$276.41
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B up to SN# 95999), BO, BR. (Part No: 184140)$220.60
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B from SN# 96000 and up), 50. (Part No: 185059)$211.77
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models 520, 530. (Part No: VTKJD520)$198.45
Valve Train Kit - Kit contains valves, guides, springs and locks. For Gas 620, 630. (Part No: VTKJD620)$326.03
Valve Train Kit - Kit contains valves, guides, springs and locks. For model 70 diesel. (Part No: VTKJD70D)$326.03
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models 720, 730 both with diesel engines. (Part No: VTKJD720D)$340.20
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models 80, (820, 830 2-cylinder). (Part No: 185401)$380.91
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models M, 40, 320, 330. (Part No: 184909)$117.66
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models 420, 430, 440. (Part No: 185395)$103.51
Valve Train Kit - Kit contains valves, guides, springs and locks. For model R. (Part No: VTKJDR)$318.94
Valve Train Kit - Kit contains valves, springs, guides and locks. For model 70 gas or LP. (Part No: VTKJD70G)$361.46
 
Engine Parts
3rd Planet Pinion Gear -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455< li>
  • Replaces John Deere OEM number RE15780, AR94151< li>
  • Replaces Casting number R71569, R79720< li>
  • 3rd Planet Pinion Gear< li> < UL> (Part No: 176802)
$293.00
Arm -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R, 9400, 9400T, 9410R, 9420, 9420T, 9430, 9460R, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number R125661< li>
  • Arm for Range Shifters and Shifter Shafts< li> < UL> (Part No: 160365)
$250.00
Auxiliary Shaft and Gear, Long - For tractor models 1100, 1105, 1130, 1135, 510 all with either A.354, A6.354.4, T6.354, T6.354.1, TC6.354.1 or T6.354.4 diesel engines. Replaces 734199M1, 737417M1, 31173422. (Part No: 743276M1)$227.91
Balancer Shaft Bushing -
  • For John Deere tractor models 940, 2030, 2130, 2140, 2250, 2320, 2350, 2355, 2440, 2450, 2520, 2530, 2550, 2555, 2650, 2750, 2755, 2850, 2855< li>
  • Compatible with John Deere Combine(s) 3300, 6602< li>
  • Compatible with John Deere Construction & industrial models 310, 400, 401, 410, 440, 450< li>
  • Compatible with John Deere Hay Cutting(s) 480, 2270, 2280, 2420, 3430< li>
  • Replaces John Deere OEM number R57160, R119210< li>
  • For Engines 4.202, 4.219, 4.239, 4039, 4039T, 4.276, 4.276T, 4045, 4045T< li> < UL> (Part No: 114699)
$4.00
Balancer Shaft - Left - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Left Hand. (Part No: 114550)$103.00
Balancer Shaft, LH - Balancer Shaft, LH This shaft is not the style that has the weight bolted on. MARKED AS R54054 . For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Part No: 114550)		$103.00
Balancer Shaft, RH - Balancer Shaft, RH This shaft is not the style that has the weight bolted on. MARKED AS R54054. For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Part No: 114551)		$85.47
Balancer Shaft - Right - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Right Hand. (Part No: 114551)		$85.47
Belt Tensioner -
  • For John Deere tractor models 8120 (s n 23918-earlier), 8120T (s n 903262-earlier), 8220 (s n 23918-earlier), 8220T (s n 903262-earlier), 8320 (s n 23918-earlier), 8320T (s n 903262-earlier), 8420 (s n 23918-earlier), 8420T (s n 903262-earlier), 8520 (s n 23918-earlier), 8520T (s n 903262-earlier)< li>
  • Compatible with John Deere Combine(s) CTS (II), T550, W540, W550, W650, 9400, 9410, 9500, 9510, 9510 SH, 9540, 9550, 9550 SH, 9560, 9560 SH, 9600, 9610< li>
  • Compatible with John Deere Harvester(s) 9986< li>
  • Replaces John Deere OEM number RE184034, AH155348< li> < UL> (Part No: 126327)
$77.00
Belt Tensioner -
  • For John Deere tractor models 8100, 8100T (less air brake), 8110, 8110T, 8200, 8200T (less air brake), 8210, 8210T, 8300, 8300T (less air brake), 8310, 8310T, 8400, 8400T (less air brake), 8410, 8410T< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 7200, 7300, 7400, 7500< li>
  • Compatible with John Deere Construction & industrial models 560D (s n 289284-earlier), 750C (s n 580058-earlier), 762B (s n 580058-earlier)< li>
  • Replaces John Deere OEM number RE57498< li>
  • 400 Pounds Per Inch< li> < UL> (Part No: 126328)
$62.00
Belt Tensioner -
  • For John Deere tractor models 9330, 9360R (s n 000101-014999), 9370R (s n 015000-later), 9430, 9530, 9530T, 9630, 9630T< li>
  • Compatible with John Deere Combine(s) S660, S670, S760, S770< li>
  • Replaces John Deere OEM number RE243154< li> < UL> (Part No: 140620)
$75.00
Belt Tensioner -
  • For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6505, 6506, 6600, 6800, 6900, 7500< li>
  • Replaces John Deere OEM number AL110621, AL111330< li> < UL> (Part No: 150763)
$95.00
Belt Tensioner -
  • For John Deere tractor models 6100, 6110, 6110L, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6510, 6510L, 6510S, 6605, 7505< li>
  • Compatible with John Deere Combine(s) 1165< li>
  • Compatible with John Deere Engine(s) 4045, 4045T, 6059T, 6068, 6068H, 6068T< li>
  • Replaces John Deere OEM number AL112300< li> < UL> (Part No: 150764)
$104.00
Belt Tensioner -
  • For John Deere tractor models 5225, 5325, 5425, 5525< li>
  • Replaces John Deere OEM number RE520217< li>
  • PowerTech 3.0L OEM Engine (Worldwide Edition)< li> < UL> (Part No: 154655)
$70.00
Belt Tensioner -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) S690, 9750 STS, 9860 STS, 9880 STS< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7350, 7400, 7450, 7500, 7550, 7700, 7750, 7800< li>
  • Replaces John Deere OEM number RE249801, RE170083, RE64442< li> < UL> (Part No: 162013)
$184.00
Bevel Gear -
  • For John Deere tractor models 420, 430< li>
  • Replaces John Deere OEM number T17846< li> < UL> (Part No: 112029)
$116.00
Brake Disc -
  • For John Deere tractor models 1030 (s n 300750-later), 1130 (s n 300750-later), 1630 (s n 300750-later), 1830 (s n 301446-later), 2030 (s n 301746-later), 2040 (s n 305840-later), 2150, 2155 (s n 672619-earlier), 2240 (s n 305314-later), 2255, 2350, 2355 (s n 672619-earlier), 2550, 2555 (s n 672619-earlier)< li>
  • Replaces John Deere OEM number AL38234, AL29645< li>
  • Splines: 12 Internal< li>
  • Outer Diameter: 12"< li> < UL> (Part No: 127042)
$67.70
Brake Disc -
  • For John Deere tractor models 2150 (With Transmission Case AL66797), 2155 (s n 672620-earlier), 2255 (With Transmission Case AL66797), 2350 (With Transmission Case AL66797), 2355 (s n 672620-earlier), 2550 (With Transmission Case AL66797), 2555 (s n 672620-earlier)< li>
  • Replaces John Deere OEM number AL65872< li>
  • Splines: 12 Internal< li>
  • O.D.: 12"< li> < UL> (Part No: 127046)
$107.00
Brake Disc -
  • For John Deere tractor models 7600 (Powershift Transmission), 7700 (Powershift Transmission), 7800 (Powershift Transmission)< li>
  • Replaces John Deere OEM number R135537< li>
  • O.D.: 14-1 2"< li>
  • I.D: 10-1 2"< li> < UL> (Part No: 127083)
$33.76
Brake Disc -
  • For John Deere tractor models 7200, 7210 (Early Model), 7400, 7405 (Early Model), 7410 (Early Model), 7420, 7500 (Early Model), 7505, 7510 (Early Model), 7520< li>
  • Replaces John Deere OEM number RE186966, RE160072< li>
  • O.D.: 13-1 8"< li>
  • I.D.: 2-7 8"< li>
  • Teeth: 15< li> < UL> (Part No: 127127)
$65.00
Brake Disc -
  • For John Deere tractor models 2440 (s n 341000-later), 2630, 2640< li>
  • Replaces John Deere OEM number RE343390, AR65718< li>
  • O.D.: 12"< li>
  • Splines: 11 Internal< li> < UL> (Part No: 127148)
$112.00
Brake Piston / Clutch Drum Disc, RE29816 -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4850, 4955, 4960, 8430, 8450, 8630, 8650, 8850< li>
  • Replaces John Deere OEM number RE29816, AR71561, AR83798< li>
  • Splines: 45 Internal< li>
  • O.D.: 5.256"< li> < UL> (Part No: 117285)
$10.00
Bushing -
  • For John Deere tractor models 2510, 2520, 3020 (s n 123000-later), 3020 (s n 122999-earlier), 4000 (s n 201000-later), 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4650, 4755, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R49372< li> < UL> (Part No: 167307)
$25.26
Bushing -
  • For John Deere tractor model 4020< li>
  • Compatible with John Deere Construction & industrial model 410B, 410C, 410D, 415B, 440, 440A, 440B, 510B, 510C, 510D, 515B, 540, 540A, 540B, 570, 570A, 570B, 610B, 610C, 710B, 710C< li>
  • Replaces John Deere OEM number R79077< li> < UL> (Part No: 167405)
$19.00
Cam Plug -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 5010, 5020, 5200, 5400, 6030, 7020, 7520, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8430, 8440, 8450, 8520, 8520T, 8560, 8630, 8640, 8650, 8760, 8960< li>
  • Replaces John Deere OEM number R26115< li> < UL> (Part No: 162173)
$5.76
Camshaft - This New Camshaft replaces those Marked R32425 Or R33778 It is used in Block R26070, R33180, R34340, R40890, R40900. Used in 4010 Diesel, 4020 Diesel below serial 200999 and 600 Industrial Diesel below serial number 214999. Replaces AR32732 (Part No: 108146)		$317.10
Camshaft - This new camshaft is used on the following John Deere engines: 6.303, 6.329, 6.359, 6.359T, 6.414T, 6095D, 6095T, 6068D and 6068T in Tractors - 2940, 2950, 2955, 3120, 3130, 3150, 3511, 4030, 4050, 7200, 7400, 7600. Also used in Combines - 4400, 4425, 6600, 9400, Cotton Strippers - 7445, 7450, 7455, Cotton Pickers - 9900, 9910, 9920, 9930. It does not include tach drive part # R81513. (Part No: 160888)		$225.00
Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Part No: 152042)		$143.00
Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Part No: 152042)		$143.00
Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Part No: 152042)		$143.00
Camshaft - For tractor models JD646, JD690, JD690A, JD740, 1177, 1188, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5440, 5720, 5730, 5820, 644C, 644D, 6600, 6602, 6620, 6622, 690B, 690C, 690CR, 693B, 693C, 740A, 762, 762A, 770A, 770B, 7700, 772A, 772B, 7720, 790, 790D, 792, 793D, 8430, 8440, 8450, 850B, 8640, 8650, 8820, 892DLC, 985, 9940, 9950. Camshaft replaces AR79610, AR71709, AR74144, AR100384, Casting Numbers R71529, R78316, R77259 (Part No: 160892)$291.00
Camshaft -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6210, 6310, 6405, 6410, 6510, 6605, 6610< li>
  • Compatible with John Deere Construction & industrial models 120, 210, 230, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 550, 555, 650< li>
  • Replaces John Deere OEM number RE56375< li> < UL> (Part No: 123945)
$160.00
Camshaft -
  • For John Deere tractor model 3020 (s n 122999-later)< li>
  • Compatible with John Deere Construction & industrial model 500, 500A (s n 123113-later), 500C, 510< li>
  • Compatible with John Deere Engine(s) 270 (Diesel, s n 124999-later)< li>
  • Replaces John Deere OEM number R42351< li> < UL> (Part No: 160889)
$250.00
Camshaft -
  • For John Deere tractor models 3010, 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500 (late), 500A (s n 123113-earlier)< li>
  • Compatible with John Deere Engine(s) 201 (gas, original block, use with 20 tooth oil pump and tach gears), 227 (gas, original and replacement block)< li>
  • Replaces John Deere OEM number R46427< li> < UL> (Part No: 160893)
$214.00
Camshaft -
  • For John Deere tractor models 4055, 4255, 4455 (late), 4555, 4560, 4755, 4760, 4955, 4960, 8560 (early)< li>
  • Compatible with John Deere Combine(s) 9500 (early), 9600 (early)< li>
  • Compatible with John Deere Harvester(s) 9960 (early)< li>
  • Compatible with John Deere Construction & industrial models 644E, 644ER, 740E, 740G (early), 748E, 748G (early)< li>
  • Compatible with John Deere Engine(s) 6076A (s n 499999-earlier), 6076T (s n 499999-earlier)< li>
  • Replaces John Deere OEM number R108370< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160897)
$315.00
Camshaft -
  • For John Deere tractor models 4040, 4050, 4230, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 7700< li>
  • Compatible with John Deere Engine(s) 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R71530< li>
  • For a Remanufactured version of this sku use Item #: 201080< li> < UL> (Part No: 165590)
$295.00
Camshaft and Gear Kit -
  • For John Deere tractor models 3010, 3020< li>
  • Replaces John Deere OEM number AR32730, R32428< li> < UL> (Part No: 155735)
$254.70
Camshaft and Lifter Kit - This Camshaft and Lifter Kit replaces those marked: R39345 or RE522313. Used on 2950, 2955, (3040 SN 430000>), (3050 European Edition), 3055, (3140 SN 430000>), 3150, 3155, 3255, (3350 European Edition), (3640 European Edition), (3650 European Edition), (4050 with 6359TR Engine), (6506 European Edition), (6600 European Edition), (6800 European Edition), (6900 European Edition), (7500 SN <001336). Replaces AT18190, DD13432, AR79624, RE14977, R79345 (Part No: 124446)		$450.00
Camshaft & Lifter Kit -
  • For John Deere tractor models 4010, 4020 (s n 215000-earlier)< li>
  • Compatible with John Deere Engine(s) 381, 404< li>
  • Replaces John Deere OEM number R26070, R33180, R34340, R40890, R40900< li>
  • Includes oil pump drive gear< li> < UL> (Part No: 128665)
$580.00
Camshaft & Lifter Kit -
  • For John Deere tractor models 4000, 4020 (s n 201000-later), 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 7700, 7720, 8820< li>
  • Compatible with John Deere Engine(s) 6404A (s n 335845-later), 6404D (diesel, s n 215000-later), 6404T (s n 335845-later), 6466A (s n 67684-later), 6466D (non-turbo), 6466T (s n 253372-later)< li>
  • Replaces John Deere OEM number AR100385< li>
  • Replaces Block Casting number R44310, R45980, R47020, R47110, R49470, R49650, R59850, R72128< li> < UL> (Part No: 158278)
$325.00
Camshaft & Lifter Kit -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 8560, 8760, 8960< li>
  • Compatible with John Deere Combine(s) 9500, 9600< li>
  • Compatible with John Deere Harvester(s) 9960< li>
  • Compatible with John Deere Engine(s) 6076, 6076A, 6076T< li>
  • Replaces John Deere OEM number RG22421< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 158525)
$425.00
Camshaft & Lifter Kit -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A< li>
  • Replaces John Deere OEM number AR49143< li> < UL> (Part No: 165592)
$385.00
Camshaft, Remanufactured, AR100384 -
  • For John Deere tractor models 4000, 4020, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Replaces John Deere OEM number AR100384, AR71709, AR74144, AR79610< li>
  • Replaces John Deere Casting number R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316< li>
  • Engine(s): 6404, 6466 diesel< li>
  • Cylinder: 6< li>
  • Casting No. R59420, R61150, R64086, R71529, R71530, R71531, R77259, R78316< li> < UL> (Part No: 204080)
$216.01
Camshaft, Remanufactured, R119831 -
  • For John Deere tractor model 8870< li>
  • Compatible with John Deere Engine(s) 6101< li>
  • Replaces John Deere Casting number R119831< li>
  • Our rebuilt camshaft has been cleaned, checked, and polished.< li> < UL> (Part No: 210283)
$243.01
Cap Screw -
  • For John Deere tractor models 5020, 6030, 7520, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Construction & industrial models 450LC, 644B, 646, 646B, 744E, 762, 770, 770A, 770AH, 772A, 772AH, 844, 855, 860B, 862, 862B, 890, 890A, 990, 992ELC< li>
  • Replaces John Deere OEM number R80575< li> < UL> (Part No: 158386)
$15.00
Cap Screw -
  • For John Deere tractor models 7520, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Compatible with John Deere Engine(s) 6101AF010, 6101HF010, 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number R80577< li> < UL> (Part No: 158388)
$19.76
Clutch Assembly Plate - C1 & C2 -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R85626, R70777< li>
  • O.D.: 10.995"< li>
  • I.D.: 6.900"< li> < UL> (Part No: 127112)
$67.00
Clutch Disc -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4755, 4760, 8430, 8450, 8630, 8650, 8850< li>
  • Replaces John Deere OEM number RE28023, AR68352, AR87484, RE20133, AR43057< li>
  • Transmission Front Clutch Pack Disc< li>
  • 42 Splines< li>
  • Outside Diameter: 7.76" < li> < UL> (Part No: 114640)
$39.26
Clutch Disc -
  • For John Deere tractor models 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6415, 6420, 6510, 6520, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powerquad Transmission)< li>
  • Replaces John Deere OEM number RE35512, RE321692< li>
  • O.D.: 8.850"< li>
  • I.D.: 5.510"< li>
  • Teeth: 60< li> < UL> (Part No: 122214)
$29.00
Clutch Disc -
  • For John Deere tractor models 6110, 6120, 6200, 6210, 6215, 6300, 6310, 6320, 6400, 6405, 6410, 6415, 6420, 6500, 6510, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920 (All With Powerquad Transmission)< li>
  • Replaces John Deere OEM number RE151059< li>
  • O.D.: 11-1 2"< li>
  • I.D.: 8-7 8"< li>
  • Teeth: 87< li> < UL> (Part No: 122622)
$37.00
Clutch Disc -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8430T, 8520, 8520T, 8530 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number RE294016, RE67457< li>
  • I.D. Of Splines: 5.461"< li>
  • O.D.: 9.094"< li>
  • Thickness: .115"< li> < UL> (Part No: 123644)
$36.26
Clutch Disc -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All Powershift Transmission)< li>
  • Replaces John Deere OEM number R96830< li>
  • O.D.: 8-7 8"< li>
  • I.D.: 6-1 4"< li>
  • 6 Internal Tabs< li> < UL> (Part No: 127125)
$16.00
Clutch Disc -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (2006-2009), 8430T, 8520, 8520T, 8530 (All Powershift Transmission), 8560, 8570 (Powersync Transmission), 8760, 8770 (Powersync Transmission), 8870 (Powersync Transmission), 8960, 8970 (Powersync Transmission), 9100 (Powersync Transmission), 9120 (Powersync Transmission), 9200 (Powersync Transmission), 9220 (Powersync Transmission), 9230 (Manual Shift Transmission), 9300 (Powersync Transmission), 9300T (Powersync Transmission), 9320 (Powersync Transmission), 9320T (Powersync Transmission), 9330 (With Manual Shift Transmission), 9400 (Powersync Transmission), 9400T (Powersync Transmission), 9420 (Powersync Transmission), 9420T (Powersync Transmission), 9430 (With Manual Shift Transmission)< li>
  • Compatible with John Deere Combine(s) 9770, 9870< li>
  • Replaces John Deere OEM number RE294017, RE67458< li>
  • Teeth: 54 Internal< li>
  • O.D.: 7.000"< li>
  • I.D.: 4.627" (major) & 4.424"(minor)< li> < UL> (Part No: 127126)
$26.00
Clutch Disc -
  • For John Deere Construction & industrial models 210LE, 310, 310G, 310SE, 310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number AT179473< li>
  • O.D.: 4.71"< li>
  • I.D.: 3.11"< li>
  • Thickness: .063"< li>
  • Teeth: 40< li> < UL> (Part No: 128024)
$27.76
Clutch Disc -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920< li>
  • Replaces John Deere OEM number R95422< li> < UL> (Part No: 164133)
$50.40
Clutch Disc -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2550, 2555, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C< li>
  • Replaces John Deere OEM number AL71088, AT21665, RE33891, AL24059, AT21669< li>
  • Center: 6 Springs< li>
  • Disc Size: 10"< li>
  • Diameter: 9.843"< li>
  • Spline Count: 20< li>
  • Spline Diameter: 1.3125"< li> < UL> (Part No: 176271)
$279.30
Clutch Disc - PTO, RE23286 -
  • For John Deere tractor models 4050, 4055, 4240, 4250, 4255, 4430 (s n 044989-later), 4440, 4450, 4455, 4555, 4560, 4630 (s n 016988-later), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6410, 6415, 6420, 6500, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700 (s n 043124-earlier), 7710, 7720, 7800, 7810, 7820, 7920, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number RE23286, AR68945, AR94517, RE234261, RE65291< li>
  • Splines: 42 Internal< li>
  • O.D.: 7.760"< li> < UL> (Part No: 117031)
$22.26
Clutch Drive Plate -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (2006-2009), 8430T, 8520, 8520T, 8530 (All With Powershift)< li>
  • Replaces John Deere OEM number R108507< li> < UL> (Part No: 127070)
$21.60
Clutch Plate -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powershift)< li>
  • Replaces John Deere OEM number R107264< li>
  • O.D.: 7.625"< li>
  • I.D.: 4-1 2"< li> < UL> (Part No: 127066)
$17.00
Clutch Plate -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8430T, 8520, 8520T, 8530 (All With Powershift)< li>
  • Replaces John Deere OEM number R108530< li>
  • ID: 4-3 4" (120mm)< li>
  • OD: 7-11 16" (195mm)< li>
  • 6 Tabs< li> < UL> (Part No: 127076)
$54.00
Clutch Plate -
  • For John Deere tractor models 6010, 6100, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6420, 6500, 6506, 6510, 6600, 6610, 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7500, 7510, 7600, 7610, 7700, 7710, 7800, 7810 (All Powerquad Transmission)< li>
  • Replaces John Deere OEM number R114215, R216292< li>
  • O.D.: 13"< li>
  • I.D: 9-1 4"< li> < UL> (Part No: 127080)
$45.17
Clutch Plate -
  • For John Deere tractor models 6010, 6100, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6420, 6500, 6506, 6510, 6600, 6610, 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7500, 7510, 7600, 7610< li>
  • Replaces John Deere OEM number R116894< li>
  • O.D.: 8-3 8"< li>
  • I.D: 4-5 8"< li> < UL> (Part No: 127082)
$22.00
Clutch Plate -
  • For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2155, 2240, 2255, 2440 (s n 278951-later), 2555, 2630, 2640 (s n 278951-later), 2755, 2855, 2940, 2950, 2955, 3055, 3155, 3255 (All With Hi-Lo Transmission)< li>
  • Replaces John Deere OEM number R64197< li>
  • I.D.: 3-7 8" (99mm)< li>
  • O.D.: 6" (152mm)< li>
  • 6 Tabs< li> < UL> (Part No: 127100)
$9.96
Clutch Plate -
  • For John Deere tractor models 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6405, 6420, 6500, 6505, 6506, 6510, 6600, 6605, 6610, 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7500, 7510, 7600, 7700, 7710, 7800, 7810 (All Powerquad Transmission)< li>
  • Replaces John Deere OEM number R96806< li>
  • O.D.: 10-7 8"< li>
  • I.D.: 5-1 4"< li> < UL> (Part No: 127124)
$39.90
Clutch Plate - 4.500" I.D. -
  • For John Deere tractor models 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6405, 6420, 6500, 6505, 6506, 6510, 6600, 6605, 6610, 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7500, 7510, 7600, 7610, 7700, 7710, 7800, 7810 (All Powerquad Transmission)< li>
  • Replaces John Deere OEM number R96805< li>
  • ID: 4-1 2" (140mm)< li>
  • OD: 9-7 8" (251mm)< li>
  • 12 Tabs< li> < UL> (Part No: 127118)
$30.60
Clutch Seperator Plate -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8430T, 8520, 8520T, 8530 (All With Powershift)< li>
  • Replaces John Deere OEM number R108509< li>
  • I.D.: 5.669"< li>
  • Outside Of Tangs O.D.: 9.843"< li>
  • Inside Of Tangs O.D.: 9.213"< li>
  • Thickness: .232"< li>
  • Tangs: 8< li> < UL> (Part No: 127073)
$42.50
Clutch With Facing Disc -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (2006-2009), 8430T, 8520, 8520T, 8530 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number RE238864, RE45415< li>
  • Teeth: 104< li>
  • I.D.: 10.399"< li>
  • O.D.: 12.717"< li>
  • Spline Diameter Max: 10.565"< li>
  • Thickness: .129"< li> < UL> (Part No: 127129)
$36.00
Clutch With Inner Spline Disc -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (2006-2009), 8430T, 8520, 8520T, 8530 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number RE155958, RE294020< li> < UL> (Part No: 123633)
$26.50
Compression Relief Petcock - Brass. For A, B, D, G and GP series. (Part No: 126174)		$49.95
Connecting Rod - Fits (300B SN <710723 Diesel), (301A SN <710721 Diesel), (302 Gas), (310 SN <189323), (350B Diesel), (350C Eng. SN 329334-590074 Diesel), (380 Diesel), (410 SN <189345 Diesel), (450B SN <187208), (480A SN <193099 Diesel), (540A SN <119500), (570 SN <275230), (570A SN <275230), 1520, (2520 Diesel), (300, 300A, 350A, 350B, 380, 1020, 1030, 820, 830, W 3.152 ENG), (302, 302A, 350B, 1420, 1520, 1530 SN <179601 3.164D ENG). Also used in 4.219 and 6.303 Engines. Verify Casting numbers R81410 Or T20007. (Part No: 121167)		$92.00
Connecting Rod - This Connecting Rod is used in John Deere 3.164D, 3.179D and 4.219 Diesel Engines. Replaces those marked R51727, R80034 (casting numbers). Replaces original part numbers AR55978, R51727, RE16495, RE21076 (Part No: 108583)		$70.00
Connecting Rod - Used on John Deere 4045D, 4045T, 6068T, 6068D PowerTech engines. This connecting rod is a direct replacement for rods marked R500000. It will also replace rods marked R123959. It is used with a 1.375 inch piston pin. Replaces John Deere part numbers RE60272, RE500002. (Part No: 123951)		$43.76
Connecting Rod - The connecting rod replaces rods marked R500335 Or R114081. It is used with 1.625 in pin diameter. Replaces R500335, RE500608. Used in John Deere Engines: 3029, 4039, 4045, 4045 (H), 4045T, 6068H, 6068T (Part No: 123970)		$57.90
Connecting Rod -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (s n 200999-earlier), 4040, 4230< li>
  • Compatible with John Deere Combine(s) 105 (s n 3001-19000), 6600 (s n 156500-later), 6602 (s n 1500-earlier), 7700 (s n 8000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 254 (diesel, s n 49999-earlier), 270 (diesel, s n 50000-later), 6381D (s n 64999-earlier), 6404D (s n 65000-later)< li>
  • Replaces John Deere OEM number AR70910, AR86981< li>
  • Replaces John Deere Casting number R52225, R58880, R66923, R26047< li>
  • 1.500" pin< li>
  • For a Remanufactured version of this sku use Item #: 210057< li> < UL> (Part No: 128691)
$104.00
Connecting Rod -
  • For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6602, 6620, 6622, 7720, 8820 (engine s n 235960-earlier)< li>
  • Compatible with John Deere Harvester(s) 5720 (engine s n 239486-earlier), 5730 (engine s n 239486-earlier), 9940 (engine s n 239486-earlier)< li>
  • Compatible with John Deere Construction & industrial models 644C (engine s n 235960-earlier), 646C (engine s n 235960-earlier), 693C (engine s n 239486-earlier), 740A (engine s n 233699-earlier), 743 (engine s n 233699-earlier), 743A (engine s n 233699-earlier), 762A (engine s n 239486-earlier)< li>
  • Compatible with John Deere Engine(s) 6466A (s n 67685-253372), 6466D (s n 67685-253372), 6466T (s n 67685-253372)< li>
  • Replaces John Deere OEM number AR87638, AR68790, SE500079< li>
  • Replaces Casting number R67320, R57303< li>
  • For a Remanufactured version of this sku use Item #: 210058< li> < UL> (Part No: 161204)
$114.00
Connecting Rod -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4260, 4440, 4450, 4455, 4455 (Mexico), 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Combine(s) CTS, CTS (s n: 670101-674000, Europe), 6620 (s n: 670101-674000, Europe), 6622 (s n: 670101-674000, Europe), 7720 (s n: 670101-674000, Europe), 8820 (s n: 670101-674000, Europe), 9500 (Maximizer), 9500 SH (s n: 670101-674000, Europe), 9600 (Maximizer)< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Engine(s) 6076 (s n: 499999-earlier), 6076AF, 6076AFN-30, 6076HF, 6466A (s n: 067685-later), 6466D (s n: 067685-later), 6466T (s n: 067685-later)< li>
  • Replaces John Deere OEM number AR93341, SE500498, R71074< li>
  • Replaces John Deere Casting number R71074< li>
  • Fits John Deere Engine(s) 6067FT, 6076AFM (s n: 499999-earlier), 6076AFM30 (s n: 50000-later)< li> < UL> (Part No: 180755)
$122.75
Connecting Rod Bearing - .030 Oversize -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5460, 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 844, 850, 855, 860B, 862, 862B, 890, 890A, 990, 992D LC, 992ELC< li>
  • Compatible with John Deere Engine(s) 6101, 6101A, 6101AF010, 6101H, 6101HF010, 6466A, 6619A, 6619AF, 6619T, 6619TF-01< li>
  • Replaces John Deere OEM number AR104132< li>
  • Bearing Size: .030" Oversize< li>
  • Sold per journal< li>
  • For Standard connecting rod bearing use Item #: 106777< li> < UL> (Part No: 158398)
$22.26
Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Part No: 109500)		$2.10
Connecting Rod Bolt - Used only for connecting rods with casting number: R80032, R80034, R81410, R121092, or R113612. Check casting number before ordering. 2.325 inch long. (Part No: 123880)		$3.00
Connecting Rod Bolt - It is important to change these any time the tension is released. This connecting rod bolt is only for connecting rods with casting number: R26047, R41423, R52285, R57303, R58880, R58882, R66922, R66923, R67320, or R71074. Check casting number before ordering. 2.484 inch long. Replaces R66452, R53290, R26325 (Part No: 113908)		$5.76
Connecting Rod Bolt - Used on connecting rods with casting number T20007, R58979. Check casting number before ordering. This bolt is 2.125 inches long. Replaces John Deere part number R74195 (Part No: 166172)		$1.00
Connecting Rod Bolt -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number R114083< li>
  • Rod Bolts With Machine Split Connecting Rods< li> < UL> (Part No: 123941)
$7.90
Connecting Rod Bushing -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5510N, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6110L, 6205, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6505, 6510, 6510L, 6510S, 6520, 6603, 6605, 6610< li>
  • Compatible with John Deere Construction & industrial models 120, 210, 210LE, 230, 310, 310E, 310SE, 315, 315SE, 344, 344H, 410, 410E, 444H, 450, 450G, 450H, 455G, 485, 485E, 486, 486E, 488, 488E, 550, 550G, 550H, 555G, 650, 650G, 650H, 670, 672, 700< li>
  • Replaces John Deere OEM number R123960< li> < UL> (Part No: 123940)
$5.66
Connecting Rod Bushing -
  • For John Deere tractor models 4700, 6010, 6110, 6210, 6310, 6405, 6410, 6510, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 230, 270, 444, 444H, 450, 455, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 710D, 843, 850< li>
  • Replaces John Deere OEM number R114082< li> < UL> (Part No: 123992)
$9.96
Connecting Rod, Remanufactured, A5554R -
  • For John Deere tractor models 620, 630< li>
  • Replaces John Deere OEM number A5554R< li> < UL> (Part No: 204236)
$146.01
Connecting Rod, Remanufactured, AR63023 -
  • For John Deere tractor models 2630, 2640< li>
  • Replaces John Deere OEM number AR63023< li>
  • Replaces John Deere Casting number R54617< li> < UL> (Part No: 210206)
$136.01
Connecting Rod, Remanufactured, AR70910, AR86981 -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (s n 200999-earlier), 4040, 4230< li>
  • Compatible with John Deere Combine(s) 105 (s n 3001-19000), 6600 (s n 156500-later), 6602 (s n 1500-earlier), 7700 (s n 8000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 254 (diesel, s n 49999-earlier), 270 (diesel, s n 50000-later), 6381D (s n 64999-earlier), 6404D (s n 65000-later)< li>
  • Replaces John Deere OEM number AR70910, AR86981< li>
  • Replaces Casting number R52225, R58880, R66923, R26047< li>
  • For a New version of this sku use Item #: 128691< li> < UL> (Part No: 210057)
$96.01
Connecting Rod, Remanufactured, AR79366 -
  • For John Deere tractor models 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Replaces John Deere OEM number AR79366< li>
  • Replaces Casting number R63959< li> < UL> (Part No: 210284)
$195.01
Connecting Rod, Remanufactured, AR87638, R67320 -
  • For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6602, 6620, 6622, 7720, 8820 (engine s n 235960-earlier)< li>
  • Compatible with John Deere Harvester(s) 5720 (engine s n 239486-earlier), 5730 (engine s n 239486-earlier), 9940 (engine s n 239486-earlier)< li>
  • Compatible with John Deere Construction & industrial models 644C (engine s n 235960-earlier), 646C (engine s n 235960-earlier), 693C (engine s n 239486-earlier), 740A (engine s n 233699-earlier), 743 (engine s n 233699-earlier), 743A (engine s n 233699-earlier), 762A (engine s n 239486-earlier)< li>
  • Compatible with John Deere Engine(s) 6466A (s n 67685-253372), 6466D (s n 67685-253372), 6466T (s n 67685-253372)< li>
  • Replaces John Deere OEM number AR87638, AR68790, SE500079< li>
  • Replaces Casting number R67320, R57303< li>
  • For a New version of this sku use Item #: 161204< li> < UL> (Part No: 210058)
$92.40
Connecting Rod, Remanufactured, AR93341 -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Combine(s) CTS, 6620, 6622, 7720, 8820, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9940, 9950, 9960, 9965, 9970< li>
  • Replaces John Deere OEM number AR93341< li>
  • Replaces Casting number R71074< li> < UL> (Part No: 210164)
$162.01
Connecting Rod, Remanufactured, R116340 -
  • For John Deere tractor models 7610, 7710, 7810, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 9100, 9200, 9300, 9400< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 9510, 9510 SH, 9550, 9550 SH, 9610, 9650 STS, 9750 STS< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 9970, 9976< li>
  • Replaces John Deere OEM number R116340< li> < UL> (Part No: 210328)
$227.01
Connecting Rod, Remanufactured, R35048, AR86987 -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Engine(s) 6531< li>
  • Replaces John Deere OEM number AR86987, AR35012, AR36666< li>
  • Replaces Casting number R35048< li> < UL> (Part No: 210353)
$189.01
Connecting Rod, Remanufactured, R41423, AR70912, AR86980 -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 7020< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 7700< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460< li>
  • Replaces John Deere OEM number AR86980, AR70912< li>
  • Replaces Casting number R41423, R66922, R58882< li> < UL> (Part No: 210066)
$91.01
Connecting Rod, Remanufactured, RE501513 -
  • For John Deere tractor models 7610, 7710 (engine s n 086536-later), 7720, 7810 (engine s n 086536-later), 7820, 7920, 8100 (engine s n 086536-later), 8100T (engine s n 086536-later), 8110, 8110T, 8120, 8120T, 8200 (engine s n 086536-later), 8200T (engine s n 086536-later), 8210, 8210T, 8220, 8220T, 8300 (engine s n 086036-later), 8300T (engine s n 086536-later), 8310, 8310T, 8320, 8320T, 8400 (engine s n 086536-later), 8400T (engine s n 086536-later), 8410T, 8420, 8420T, 8520, 8520T, 9100, 9120< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 9510 (engine s n 086536-later), 9510 SH (engine s n 086536-later), 9550 (engine s n 086536-later), 9550 SH (engine s n 086536-later), 9560, 9560 STS (engine s n 086536-later), 9610, 9650, 9650 STS (engine s n 086536-later), 9660, 9660 CTS, 9660 STS, 9670 STS, 9750, 9750 STS (engine s n 086536-later), 9760< li>
  • Compatible with John Deere Harvester(s) 6610 (engine s n 085636-later), 6650 (engine s n 085636-later), 7200, 9970 (engine s n 06536-later), 9976, 9986, 9996< li>
  • Replaces John Deere OEM number RE501513, SE501065< li>
  • Replaces Casting number R501034< li> < UL> (Part No: 210331)
$227.01
Connecting Rod, Remanufactured, RE57641 -
  • For John Deere tractor models 9120 (s n 010513-earlier), 9200 (s n 003700-earlier), 9220 (s n 010513-earlier), 9300 (s n 010513-earlier), 9300T (s n 010513-earlier), 9320 (s n 010513-earlier), 9320T (s n 010513-earlier), 9400 (s n 010513-earlier), 9400T (s n 010513-earlier), 9420 (s n 010513-earlier), 9420T (s n 010513-earlier), 9520 (s n 010513-earlier), 9520T (s n 010513-earlier), 9620 (s n 010513-earlier), 9620T (s n 010513-earlier)< li>
  • Compatible with John Deere Harvester(s) 6750 (s n 010513-earlier), 6850 (s n 010513-earlier), 7200 (s n 010513-earlier), 7300 (s n 010513-earlier), 7400 (s n 010513-earlier), 7500 (s n 010513-earlier)< li>
  • Compatible with John Deere Construction & industrial models 744H (s n 010513-earlier)< li>
  • Compatible with John Deere Engine(s) 6105 (s n 003700-earlier), 6125 (s n 0101513-earlier)< li>
  • Replaces John Deere OEM number RE57641< li>
  • Replaces Casting number R121174< li> < UL> (Part No: 210288)
$297.01
Connecting Rod with Bushing - For model 850. (Part No: CH10682)$149.80
Connecting Rod with Bushing - For tractor models 650, 750. (Part No: 182774)$176.44
Connecting Rod with Bushing - For tractor models 950, 1050. (Part No: CH10683)$149.80
Connecting Rod with Bushing - For tractor models 770, 870, 955, 970, 1070. (Part No: AM875391)$295.27
Crankcase Vent Tube - For model A from SN# 424025 up to 476999. (Part No: 179657)		$72.00
Crankcase Vent Tube - For model A from SN# 477000 up to 583999. (Part No: 179102)$66.00
Crankcase Vent Tube - For model B from SN# 1000 up to 42199. (Part No: 179849)		$77.00
Crankcase Vent Tube - For tractor models (BO, BR from SN# 325000 and up). (Part No: B1496R)$65.82
Crankcase Vent Tube - For model B with hand start SN# 60000 to 200999. (Part No: 179111)$77.00
Crankcase Vent Tube - For model B SN# 201000 to 258519. (Part No: 179857)$67.00
Crankcase Vent Tube - For model B from SN# 258520 and up. (Part No: 179852)$63.00
Crankcase Vent Tube - For model G from SN# 4251 and up. (Part No: 179858)$50.00
Crankcase Vent Tube - For model H with handstart. (Part No: H243R)$36.57
Crankcase Vent Tube - For tractor models: 60 without power steering, 620, 630, (A from s n 648000), (AO, AR from s n 273080). (Part No: 187327)		$51.04
Crankcase Vent Tube - For B with SN# 60000 to 200999. Crankcase Vent Tube. (3284R) (Part No: 179812)$51.00
Crankcase Vent Tube - For model H with electric start. Replaces H509R. (Part No: 179656)$58.00
Crankshaft - This crankshaft should be verified by the Casting # T23516 off your old crankshaft AND Snout Length of 1.37 inches. This casting number had 2 different snout lengths and is NOT interchangeable. It does not come with gear or bearings. For tractor models 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355, 300, 300A, 300B, 301A, 302, 302A, 310, 350A, 350B, 350C, 350D, 355D, 380, 5200, 5300, 5400, 5400N, 5500, 820, 830. Please Verify Length Of Snout Before Ordering, standard short snout (1.370"). (Part No: 102102)		$540.00
Crankshaft - This is a short snout, 1.42 inches. For 2510, 2020, 2030, 2520, 2440, 2250, 2510, 210C Backhoe, 6000 Hi Cycle, 219, 4239 Power Units. Crankshaft -FOR 4 CYLINDER Diesel engines, Less Bearings. Replaces AT18030, AT72949, RE33197, RE48748, RE57664. Casting numbers T23480, T23517, T28743, R81959, R94644 **** Additional shipping required due to weight of 89 lbs. Please call for shipping quote **** (Part No: 102103)		$636.80
Crankshaft - This new crankshaft doe not come with gear and is for tractor models 6400, 6500. Does not include bearings. Snout Length 2.360". For 4 cylinder Diesel Engine. Verify casting number R90825 or R120009. Additional $70 shipping due to weight. This additional charge will be added to your order. If Helican Gear is needed, order T20094. (Part No: 170257)		$926.50
Crankshaft -
  • For John Deere tractor models 3010 (diesel), 3020 (diesel s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 510A (all diesel)< li>
  • Compatible with John Deere Engine(s) 254 (diesel), 270 (diesel, s n 280000-earlier)< li>
  • Replaces John Deere OEM number AR26428< li>
  • Replaces Casting number R26540, R26540R, R40570, R46498< li>
  • Engine: 254, 4.2 Liters, 270 (s n 280000-earlier), 4.4 liter, 4 Cylinder< li>
  • Flange: Flat, No Centering Ring, 4 Bolt Holes, 2 Dowel Holes< li>
  • Snout: 1 Bolt Hole, 2 Keyways< li>
  • Timing Gear Installed: L-Hand Helix, 23 Teeth< li>
  • Balanced Gear Installed, R-Hand Helix, 74 Teeth< li>
  • Bore: (254) 4.125" (270) 4.250"< li>
  • For a Remanufactured version of this sku use Item #: 102105< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 102104)
$1925.00
Crankshaft - For 2155, 2355N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5310N, 5320, 5320N, 5400, 5400N, 8875, (3029D, 3029T both with Saran Engine SN# 100000 and up), (1550, 1750, 1850 all with SN# 927755 and up). Crankshaft replaces Casting # R101223. (Part No: 123513)$780.00
Crankshaft - For 7400, 7600 both with 6-414D or 6-414T Diesel Engine. Cranshaft replaces Casting numbers R54619 and R104523. (Part No: RE45517)$1743.34
Crankshaft -
  • For John Deere tractor models 8560, 8760, 8960< li>
  • Compatible with John Deere Combine(s) 9500 (Maximizer), 9500 SH (Maximizer), 9600 (Maximizer)< li>
  • Compatible with John Deere Harvester(s) 9960< li>
  • Compatible with John Deere Construction & industrial models 644E, 644ER, 644G, 740E, 748E, 748G< li>
  • Replaces John Deere OEM number RE53201< li>
  • Stroke: 4.75"< li>
  • Length to Nose: 3.40"< li>
  • Flange: Centering Ring, 6 Bolt Holes, 1 Dowel< li>
  • Snout: 1 Bolt Hole, 2 Keyways - 3.40" Long from the shoulder of the 1st Main Journal to the end of the Snout< li> < UL> (Part No: 165660)
$1377.00
Crankshaft Dampener -
  • For John Deere tractor models 4320, 4520, 4620, 4630, 7020< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440< li>
  • Replaces John Deere OEM number AR43954< li> < UL> (Part No: 121846)
$1250.00
Crankshaft Dampener Pulley - For tractor models 4010, 4020 both with diesel engines. (Part No: 111773)		$144.99
Crankshaft Dampener Pulley - For tractor models 4000, 4020 all SN# above 201000 with A C. Crankshaft Dampener Pulley. (Part No: 164690)		$246.80
Crankshaft Dampener Pulley -
  • For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, 4455 (Manufactured in Mexico)< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720< li>
  • Compatible with John Deere Construction & industrial models 690B< li>
  • Replaces John Deere OEM number AR57241< li>
  • OD: 8.345"< li>
  • ID: 1.876"< li>
  • Hydraulic pump drive couplers (2) use Item #: 122100< li> < UL> (Part No: 151072)
$158.00
Crankshaft Dampener Pulley -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650 (s n 259893-later), 4755, 4760, 4850 (s n 259893-later), 4955, 4960, 8450 (s n 259893-later)< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 770A, 770AH, 770B (engine s n 499999-earlier), 770BH (engine s n 499999-earlier), 772A, 772AH, 772B (engine s n 499999-earlier), 772BH (engine s n 499999-earlier)< li>
  • Compatible with John Deere Engine(s) 6466D< li>
  • Replaces John Deere OEM number RE15018, R71021, R71022< li> < UL> (Part No: 153079)
$189.00
Crankshaft Pulley - This crankshaft pulley measures 5.59 inches outside diameter, has a 1.495 bore diameter, is a 1 groove pulley at .597 inch width. Replaces R49312, R47412, T25365 and T24440 or models (2040, 2240 both after SN# 350000), 2150, 2155, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2855. (Part No: 157741)		$100.00
Crankshaft Pulley - For JD103, 1020, 820, 830, 2240. Crankshaft Pulley replaces T24441, T25366. 1.5" I.D., 2.750" Center to Center on Holes. (Part No: 158238)		$105.00
Crankshaft Pulley - For JD400, 1830, 2030, 2130, (2440 and 2640 with SN# above 341000). Crankshaft Pulley replaces R59312, R47412, T25365. 1.5" I.D. 6 hole.R59312 (Part No: 157741)		$100.00
Crankshaft Pulley -
  • For John Deere tractor models 3010 (Gas), 3020 (Gas and Diesel), 4000 (Gas), 4020 (Gas), 4230 (Gas)< li>
  • Replaces John Deere OEM number R53031, R47624, R34366< li> < UL> (Part No: 160790)
$134.00
Crankshaft Pulley - Front -
  • For John Deere tractor models 4630, 7020 (s n 335846 - later)< li>
  • Compatible with John Deere Harvester(s) 5200 (s n 335846 - later), 5400 (s n 335846 - later), 5440< li>
  • Replaces John Deere OEM number R50414< li> < UL> (Part No: 158226)
$395.00
Crankshaft Rear Seal Installer -
  • For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6620, 7020, 7700, 7720, 8430, 8440, 8450< li>
  • Replaces John Deere OEM number R830476< li> < UL> (Part No: 180138)
$215.00
Crankshaft, Remanufactured -
  • For John Deere tractor models 1010 (diesel, s n 29000-earlier), 2010 (diesel, s n 31000-earlier)< li>
  • 3 mains< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200366)
$550.01
Crankshaft, Remanufactured -
  • For John Deere tractor models 1010 (diesel, s n 29001-later), 2010 (diesel, s n 31001-later)< li>
  • 5 mains< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200367)
$405.01
Crankshaft, Remanufactured, 5116022 -
  • For John Deere tractor model 435< li>
  • Replaces John Deere Casting number 5116022, 5116446< li>
  • Casting Number(s): 5116022, 5116446< li> < UL> (Part No: 204494)
$435.01
Crankshaft, Remanufactured, 721250-21700, CH20055 -
  • For John Deere tractor models 950, 1050< li>
  • Replaces John Deere OEM number 721250-21700, CH20055, CH10676< li>
  • For a New version of this sku use Item #: 126950< li> < UL> (Part No: 205004)
$600.01
Crankshaft, Remanufactured, A2360R -
  • For John Deere tractor model A (s n 488000-583999)< li>
  • Replaces John Deere Casting number A2360R< li>
  • Casting Number(s): A2360R< li> < UL> (Part No: 204248)
$490.01
Crankshaft, Remanufactured, A5638R -
  • For John Deere tractor models 620, 630< li>
  • Replaces Casting number A5638R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203916)
$490.01
Crankshaft, Remanufactured, AA3926R -
  • For John Deere tractor model A (s n 584000-later)< li>
  • Replaces John Deere OEM number AA3926R< li>
  • Replaces John Deere Casting number A3322R< li>
  • Casting Number(s): A3322R< li> < UL> (Part No: 207141)
$490.01
Crankshaft, Remanufactured, AB1559R, B1303R -
  • For John Deere tractor model B (s n - B60000-B959999)< li>
  • Replaces John Deere OEM number AB1559R< li>
  • Replaces John Deere Casting number B1303R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 210339)
$570.01
Crankshaft, Remanufactured, AL2218T, L4612T -
  • For John Deere tractor model L< li>
  • Replaces John Deere OEM number AL2218T< li>
  • Replaces John Deere Casting number L4612T< li>
  • Casting Number(s): L4612T< li> < UL> (Part No: 204495)
$109.01
Crankshaft, Remanufactured, AM877268 -
  • For John Deere tractor model 1070< li>
  • Replaces John Deere OEM number AM877268< li> < UL> (Part No: 210049)
$1100.01
Crankshaft, Remanufactured, AM878526 -
  • For John Deere tractor models 790, 4115, 4200, 4210< li>
  • Replaces John Deere OEM number AM878526< li>
  • Replaces John Deere Casting number E82A-169< li>
  • Casting Number(s): E82A-169< li> < UL> (Part No: 204492)
$660.01
Crankshaft, Remanufactured, AR40485 -
  • For John Deere tractor model 3020 (diesel s n 123001-later)< li>
  • Compatible with John Deere Engine(s) 270 (diesel s n 280001-later)< li>
  • Replaces John Deere OEM number AR40485< li>
  • Replaces Casting number R40570< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li>
  • For a New version of this sku use Item #: 102105< li> < UL> (Part No: 200380)
$1100.01
Crankshaft, Remanufactured, B1847R -
  • For John Deere tractor model B< li>
  • Replaces John Deere Casting number B1847R, B2460R, B2740R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 204137)
$465.01
Crankshaft, Remanufactured, B3019R -
  • For John Deere tractor model 50< li>
  • Replaces John Deere Casting number B3019R< li>
  • Casting Number(s): B3019R< li> < UL> (Part No: 204488)
$265.01
Crankshaft, Remanufactured, B3729R -
  • For John Deere tractor models 520, 530< li>
  • Replaces Casting number B3729R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203780)
$270.01
Crankshaft, Remanufactured, CH15606 -
  • For John Deere tractor model 650< li>
  • Replaces John Deere OEM number CH15606< li>
  • Engine: 2T80< li> < UL> (Part No: 204164)
$720.01
Crankshaft, Remanufactured, F1223R -
  • For John Deere tractor model 70< li>
  • Replaces Casting number F1223R, F1115R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203783)
$500.01
Crankshaft, Remanufactured, F2729R -
  • For John Deere tractor models 720, 730 (gas)< li>
  • Replaces Casting number F2729R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203781)
$390.01
Crankshaft, Remanufactured, H3490R -
  • For John Deere tractor model H (gas)< li>
  • Replaces Casting number H3490R, H225R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200359)
$435.01
Crankshaft, Remanufactured, M1692T -
  • For John Deere tractor model 40 (gas)< li>
  • Replaces Casting number M1692T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200361)
$600.01
Crankshaft, Remanufactured, M3114T -
  • For John Deere tractor models 420, 430, 440 (all gas)< li>
  • Replaces Casting number M3114T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200362)
$600.01
Crankshaft, Remanufactured, M450T -
  • For John Deere tractor models M (gas), MT (gas)< li>
  • Replaces Casting number M450T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200360)
$365.01
Crankshaft, Remanufactured, R104523, R54619 -
  • For John Deere tractor models 7400, 7600< li>
  • Replaces Casting number R104523, R54619< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200392)
$1375.01
Crankshaft, Remanufactured, R115120 -
  • For John Deere tractor models 9200, 9220, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) 9750 STS, 9860 STS< li>
  • Compatible with John Deere Harvester(s) 6750, 6850, 7300, 7400, 7500, 7700< li>
  • Replaces Casting number R115120< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203917)
$2450.01
Crankshaft, Remanufactured, R120009 -
  • For John Deere tractor models 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Engine(s) 4045T< li>
  • Replaces Casting number R120009< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200391)
$930.01
Crankshaft, Remanufactured, R120030, RE505124 -
  • For John Deere tractor models 7710 (s n 142157-later), 7810 (s n 142157-later), 8100 (s n 142157-later), 8110 (s n 142157-later), 8200 (s n 142157-later), 8210 (s n 142157-later), 8300 (s n 142157-later), 8400 (s n 142157-later), 8410 (s n 142157-later), 9120< li>
  • Replaces John Deere Casting number R120030, RE505124< li>
  • Casting Number: R120030, RE505124< li>
  • Spur cut< li> < UL> (Part No: 205114)
$1100.01
Crankshaft, Remanufactured, R26550 -
  • For John Deere tractor models 4010, 4020 (gas, s n 200999-earlier)< li>
  • Replaces Casting number R26550< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200382)
$710.01
Crankshaft, Remanufactured, R340R -
  • For John Deere tractor model R< li>
  • Replaces John Deere Casting number R340R< li>
  • Casting Number: R340R< li> < UL> (Part No: 204104)
$810.01
Crankshaft, Remanufactured, R36350 -
  • For John Deere tractor models 5010, 5020, 6030, 7520 (Diesel), 8630, 8640, 8650< li>
  • Replaces Casting number R36350, AR35010, AR53203, AR58203, AR69264< li>
  • For engines with cam driven oil pump< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200390)
$1900.01
Crankshaft, Remanufactured, R40720 -
  • For John Deere tractor model 3020 (gas, s n 123001-later)< li>
  • Replaces Casting number R40720< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200379)
$1050.01
Crankshaft, Remanufactured, R54501R -
  • For John Deere tractor models 2630, 2640 (Diesel)< li>
  • Replaces Casting number R54501R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li>
  • For a New version of this sku use Item #: 128439< li> < UL> (Part No: 200375)
$660.01
Crankshaft, Remanufactured, R56979R -
  • For John Deere tractor models 4040 (s n 584114-earlier), 4240 (s n 160279-earlier), 4430, 4440 (s n 160129-earlier), 4520, 4630, 4640, 4840, 7020, 8430 (s n 231857-earlier), 8440 (s n 161132-earlier)< li>
  • Replaces Casting number R56979R< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished< li>
  • For a New version of this sku use Item #: 102106< li> < UL> (Part No: 200386)
$1100.01
Crankshaft, Remanufactured, R63476 -
  • For John Deere tractor models 8630, 8640, 8650 (Diesel)< li>
  • Replaces Casting number R63476, AR78403< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li>
  • For a New version of this sku use Item #: 102108< li> < UL> (Part No: 200393)
$1375.01
Crankshaft, Remanufactured, R87544 -
  • For John Deere tractor model 8560< li>
  • Replaces John Deere Casting number R87544< li>
  • Casting Number: R87544< li> < UL> (Part No: 204072)
$1175.01
Crankshaft, Remanufactured, RE41821 -
  • For John Deere tractor models 7700, 7800, 8560 (all s n 509679-earlier)< li>
  • Compatible with John Deere Combine(s) 9500, 9600 (both s n 509679-earlier)< li>
  • Compatible with John Deere Harvester(s) 6610 (s n 509679-earlier)< li>
  • Replaces Casting number RE41821< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203746)
$1325.01
Crankshaft, Remanufactured, RE42675 -
  • For John Deere tractor models 4255, 4430, 4450, 4555, 4560< li>
  • Replaces John Deere Casting number RE42675< li>
  • Casting Number: RE42675< li> < UL> (Part No: 204088)
$1050.01
Crankshaft, Remanufactured, RE502385 -
  • For John Deere tractor models 5045, 5055, 5065, 5103, 5203, 5303, 5403< li>
  • Replaces John Deere OEM number RE502385< li> < UL> (Part No: 205149)
$930.01
Crankshaft, Remanufactured, RE506195 -
  • For John Deere tractor models 6110, 6120, 6210, 6310, 6320, 6405, 6410, 6420, 6510, 6520< li>
  • Replaces John Deere OEM number RE506195< li>
  • Replaces John Deere Casting number R503715< li>
  • Casting Number(s): R503715< li>
  • For a New version of this sku use Item #: 167163< li> < UL> (Part No: 205078)
$610.01
Crankshaft, Remanufactured, RE521348, R517369 -
  • For John Deere tractor models 2155, 2355, 5105< li>
  • Replaces John Deere OEM number RE521348< li>
  • Replaces John Deere Casting number R517369< li>
  • Casting number(s): R517369< li> < UL> (Part No: 205160)
$810.01
Crankshaft, Remanufactured, RE53204, RE53205 -
  • For John Deere tractor models 4040, 4050, 4230, 4240, 4320, 4430, 4520, 4620, 4630, 7020< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere Casting number RE53204, RE53205< li>
  • Engine: 6466< li>
  • Casting Number(s): RE53204, RE53205< li> < UL> (Part No: 204328)
$740.01
Crankshaft, Remanufactured, RE54883, RE55452 -
  • For John Deere tractor models 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Construction & industrial models 344E, 410C, 410D, 450G, 455G, 490, 495, 510C, 510D, 550G, 555G, 590D, 595D, 610C, 650G< li>
  • Replaces John Deere OEM number RE54883, RE55452, RE57661< li>
  • Replaces Casting number R108657, R120009, R90825< li>
  • Crankshaft nose has one bolt hole< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 203772)
$390.01
Crankshaft, Remanufactured, RE564763 -
  • For John Deere tractor model 7230R< li>
  • Replaces John Deere OEM number RE564763< li> < UL> (Part No: 210048)
$760.01
Crankshaft, Remanufactured, RG23551, RE53199 -
  • For John Deere tractor models 7700 (s n 509680-later), 7800 (s n 509680-later), 8100, 8200, 8300, 8560 (s n 509680-later), 8570< li>
  • Compatible with John Deere Combine(s) 9500 (s n 509680-later), 9600 (s n 509680-later)< li>
  • Compatible with John Deere Harvester(s) 6610 (s n 509680-later)< li>
  • Compatible with John Deere Engine(s) 6076AF< li>
  • Replaces John Deere OEM number RG23551< li>
  • Replaces Casting number RE53199< li>
  • Teeth: 27 74< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 203747)
$1325.01
Crankshaft, Remanufactured, T13048T -
  • For John Deere tractor model 1010 (gas, s n 31001-later)< li>
  • Replaces Casting number T13048T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200365)
$520.01
Crankshaft, Remanufactured, T17885T -
  • For John Deere tractor model 1010 (gas, s n 31000-earlier)< li>
  • Replaces Casting number T17885T, T13048T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200364)
$405.01
Crankshaft, Remanufactured, T23483T -
  • For John Deere tractor models 2020, 2510 (Gas)< li>
  • Replaces Casting number T23483T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200372)
$465.01
Crankshaft, Remanufactured, T23484T -
  • For John Deere tractor model 1020< li>
  • Compatible with John Deere Construction & industrial model 300B< li>
  • Compatible with John Deere Engine(s) 135 (gas)< li>
  • Replaces Casting number T23484T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200369)
$445.01
Crankshaft, Remanufactured, T23488T -
  • For John Deere tractor model 2010 (gas, s n 29000-earlier)< li>
  • Replaces Casting number T23488T, T632T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200370)
$460.01
Crankshaft, Remanufactured, T23517 -
  • For John Deere tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2855 (all diesel)< li>
  • Replaces Casting number T23517, T23480< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li>
  • For a New version of this sku use Item #: 102103< li> < UL> (Part No: 200373)
$465.01
Crankshaft, Remanufactured, T28743T -
  • For John Deere tractor models 2030, 2520 (Gas)< li>
  • Replaces Casting number T28743T< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200374)
$405.01
Crankshaft, Remanufactured, TN75 -
  • For John Deere tractor models 755, 756, 855, 856< li>
  • Compatible with John Deere Construction & industrial models 655< li>
  • Replaces John Deere Casting number TN75< li>
  • Casting Number: TN75< li> < UL> (Part No: 204084)
$550.01
Crankshaft, with Timing Gear - Marked with casting number R63451, with oil pump gear, with front timing gear, timing gear is installed. For tractor models (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Call for shipping charges - Weight 149 lbs. (Part No: 127288)$1592.60
Crankshaft, with Timing Gear - Marked with casting number R63451, with oil pump gear, with front timing gear, timing gear is installed, 3" snout. For tractor models (4955, 4960 6.076H SN# up to 499999 & 6.076H, 6.076T), (6600 SN# 215000-335845 with 6.404D & SN# 335845 and up with 6.404T A), (6602 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (6620, 6622 with 6.466T all & 6.466A SN# up to 233592 and above 317859), 9960, (9940, 99950 with 6-404 6.466A engine).. Call for shipping charges - Weight 149 lbs. (Part No: 127288)$1592.60
Cylinder Head - For tractor models (B unstyled SN# 1000-59999, (BO, BR SN# 325000-328999). Replaces B357R. Comes with Valve guides and Seats only. (Part No: AB311R)$474.86
Cylinder Head - Cylinder head less valves for tractor models M, MT, 40. Replaces M56T, M1768T, AM239T. Includes Guides and Seats. Customer must do the final machining - grind valves to match seats and size the guides to the valves. (Part No: 109434)		$550.00
Cylinder Head - For 420, 430. Cylinder Head with Guides and Seats. Replaces M3035T and M3995T. (Part No: 108084)		$560.00
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 1020, 1520, 1530, 2040, 2150, 2240, 2255. Valve overhaul kit. Contains intake & exhaust valves, valve caps, spring, and keys. 1 kit used in 152 CID, 164 CID, & 179 CID 3 cylinder diesel engines (Part No: VOKD152)$132.19
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 2020, 2510, 2520. (Part No: VOKD180)$155.33
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640. (Part No: VOKD202)$166.59
Cylinder Head Overhaul Kit - For tractor models 2555, 2750, 2755. (Part No: VOKD239T)$192.91
Cylinder Head Overhaul Kit - Valve Overhaul Kit. Contains Intake and Exhaust Valves. Springs. Guides, and Keys. 1 Kit used in 270 Cu In 4 Cyl Diesel Engine (Block numbers R32020, R40850 ONLY, to S N 280000). For model 3020. (Part No: VOKD270A)$257.65
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit For 3020. Contains Intake and Exhaust valves, Valve Caps, Springs, and Keys. 1 kit used in 270 CID 4 Cyl Diesel Engine. (S N 280001 & UP) (Part No: VOKD270B)$254.87
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 2840, 2940, 2950, 2955, 4030. Contains intake & exhaust valves, valve caps, springs, and keys. 1 kit used in 329 CID & 359 CID 6 cylinder diesel engines. (Part No: VOKD329)		$261.65
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For model 4010. (Part No: VOKD381)$311.22
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For model 4020. (Part No: VOKD404A)$405.80
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 4320, 4520, 4620, 7020. (Part No: VOKD404C)$394.93
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: VOKD466)$349.65
Cylinder Head, Remanufactured -
  • For John Deere tractor model 8960< li>
  • Engine 855< li>
  • Cylinders: 6< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200357)
$435.01
Cylinder Head, Remanufactured, 2843169-3 -
  • For John Deere Construction & industrial model 800< li>
  • Replaces John Deere Casting number 2843169-3, 4027600-2< li>
  • Engines Chrysler< li>
  • Casting No. 2843169-3, 4027600-2< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 204425)
$1100.01
Cylinder Head, Remanufactured, 3055098 -
  • For John Deere tractor models 8770, 8870 (Diesel), 8970< li>
  • Replaces John Deere Casting number 3055098, 3046760< li>
  • 14.0L Cummins< li>
  • Cylinders: 6< li>
  • Casting No. 3055098, 3046760< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203944)
$2725.01
Cylinder Head, Remanufactured, 4T95, CH18384 -
  • For John Deere tractor model 1650< li>
  • Replaces John Deere Casting number 4T95< li>
  • Replaces John Deere OEM number CH18384< li>
  • Diesel< li>
  • Engine 190< li>
  • Cylinders: 3< li>
  • Casting No. 4T95< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200314)
$1175.01
Cylinder Head, Remanufactured, 5121102 -
  • For John Deere tractor model 435< li>
  • Compatible with John Deere Construction & industrial model 440< li>
  • Replaces John Deere Casting number 5121102< li>
  • Engine Detroit diesel 53 series 106CI 1.7L< li>
  • Casting No. 5121102< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 204432)
$810.01
Cylinder Head, Remanufactured, A2325R -
  • For John Deere tractor model A< li>
  • Replaces John Deere Casting number A2325R< li>
  • Engine 321< li>
  • Cylinders: 2< li>
  • Casting No. A2325R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200270)
$490.01
Cylinder Head, Remanufactured, A4625R -
  • For John Deere tractor model 60< li>
  • Replaces John Deere Casting number A4625R< li>
  • Engine 321< li>
  • Cylinders: 2< li>
  • Casting No. A4625R< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200287)
$900.01
Cylinder Head, Remanufactured, A5810R -
  • For John Deere tractor models 620, 630 (gas)< li>
  • Replaces John Deere Casting number A5810R< li>
  • Casting No. A5810R< li>
  • Not a Welded Head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205420)
$630.01
Cylinder Head, Remanufactured, A587 -
  • For John Deere tractor model A< li>
  • Replaces John Deere Casting number A587< li>
  • Engine 321< li>
  • Cylinders: 2.< li>
  • Casting No. A587< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200269)
$790.01
Cylinder Head, Remanufactured, AM877263 -
  • For John Deere tractor models 970, 1070< li>
  • Replaces John Deere OEM number AM877263, AM878615< li>
  • Replaces John Deere Casting number 4D82< li>
  • Cylinders: 4< li>
  • Casting No 4D82< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205139)
$1200.01
Cylinder Head, Remanufactured, AM877670 -
  • For John Deere tractor model 955< li>
  • Replaces John Deere OEM number AM877670< li> < UL> (Part No: 210225)
$1200.01
Cylinder Head, Remanufactured, AM878523 -
  • For John Deere tractor models 790, 3215, 4115, 4200, 4210< li>
  • Compatible with John Deere Lawn & Garden(s) 1445, 1545< li>
  • Compatible with John Deere Turf Golf(s) 3215, 3215A, 3215B, 3225B, 3235, 3235A, 3235B< li>
  • Replaces John Deere OEM number AM878523< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 210217)
$1200.01
Cylinder Head, Remanufactured, AM879737 -
  • For John Deere tractor models 990, 4500, 4510, 4600, 4610, 4700, 4710< li>
  • Compatible with John Deere Construction & industrial models 110< li>
  • Compatible with John Deere Lawn & Garden(s) 1600< li>
  • Replaces John Deere OEM number AM879737< li>
  • Replaces John Deere Casting number E88< li>
  • Casting No. E88< li>
  • Engine: 4TNE84-EJTC45, 4TNE-EJTF45, 4TNE-EJTC46, 4TNE84-EJTF46, 4TNE84-EFTC-45S, 4TNE84-EJTC45S, 4TNE84-EJTF46S, 4TNE88-EFTF47S< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 209950)
$1450.01
Cylinder Head, Remanufactured, AR103505 -
  • For John Deere tractor models 4050, 4240S, 4250, 4350, 4430 (s n 445948-later), 4440, 4450, 4630 (s n 579850-later), 4640, 4650, 4840, 4850, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 985, 1085, 1177, 1188, 1188H4, 6600, 6602 (s n 445570-later), 6620, 6622, 7700 (s n 445570-later), 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B (s n 579850-later), 693C, 740 (s n 445948-later), 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B (s n 499999-earlier), 772A, 772AH, 772B (s n 499999-earlier), 790, 790D, 792, 793, 850B, 892< li>
  • Replaces John Deere OEM number AR103505, SE500327< li>
  • Replaces John Deere Casting number R61521< li>
  • Engine 404, 466< li>
  • Cylinders: 6< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200338)
$1975.01
Cylinder Head, Remanufactured, AR26310 -
  • For John Deere tractor models 3010 (s n 049999-earlier), 3020 (s n 122999-earlier)< li>
  • Replaces John Deere OEM number AR26310< li>
  • Replaces John Deere Casting number R26030< li>
  • Diesel< li>
  • Engines 254< li>
  • Cylinders: 4< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200321)
$870.01
Cylinder Head, Remanufactured, AR32343 -
  • For John Deere tractor models 500, 3010 (s n 049999-earlier), 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123113-earlier)< li>
  • Replaces John Deere OEM number AR32343< li>
  • Replaces Casting number R26020< li>
  • Gas and LP< li>
  • Engine 227< li>
  • Cylinders: 4< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200320)
$1150.01
Cylinder Head, Remanufactured, AR34687 -
  • For John Deere tractor models 500, 3010 (s n 049999-earlier), 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500A< li>
  • Replaces John Deere OEM number AR34687< li>
  • Replaces John Deere Casting number R34860< li>
  • Diesel< li>
  • Pencil Injectors< li>
  • Engine 270< li>
  • Cylinders 4< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200324)
$830.01
Cylinder Head, Remanufactured, AR81614 -
  • For John Deere tractor model 3020 (s n 123000-later)< li>
  • Compatible with John Deere Construction & industrial model 500A (s n 123114-152141), 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR81614< li>
  • Replaces John Deere Casting number R40540< li>
  • Diesel< li>
  • Engine 270< li>
  • Cylinders: 4< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200325)
$1175.01
Cylinder Head, Remanufactured, B1306R -
  • For John Deere tractor models B (s n B60000-B95999), BN (s n B60000-B95999), BNH (s n B60000-B95999), BO (s n 329000-later), BR (s n 329000-later), BW (s n B60000-B95999), BWH (s n B60000-B95999)< li>
  • Replaces John Deere Casting number B1306R< li>
  • Engine 190 (gas)< li>
  • Cylinders: 2< li>
  • Casting No. B1306R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200273)
$790.01
Cylinder Head, Remanufactured, B1784R, B2501R, B2871R, AB4204R -
  • For John Deere tractor models B (s n B96000-later), BN (s n B96000-later), BNH (s n B96000-later), BW (s n B96000-later), BWH (s n B96000-later)< li>
  • Replaces John Deere Casting number B1784R, B2501R, B2871R, AB4204R< li>
  • Cylinders: 2 (gas)< li>
  • Casting No. B1784R, B2501R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200274)
$900.01
Cylinder Head, Remanufactured, B2871R -
  • For John Deere tractor model 50< li>
  • Replaces John Deere Casting number B2871R< li>
  • Engine(s): 190< li>
  • Cylinders: 2< li>
  • Casting No. B2871R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200286)
$900.01
Cylinder Head, Remanufactured, B3204R -
  • For John Deere tractor model 50< li>
  • Replaces John Deere Casting number B3204R< li>
  • Engine 190< li>
  • Cylinders: 2< li>
  • Casting No. B3204R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200285)
$900.01
Cylinder Head, Remanufactured, B3822R -
  • For John Deere tractor models 520, 530 (Gas)< li>
  • Replaces John Deere Casting number B3822R< li>
  • Casting No. B3822R< li>
  • Engines 190< li>
  • Cylinders: 2< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205505)
$900.01
Cylinder Head, Remanufactured, C250R -
  • For John Deere tractor model G< li>
  • Replaces John Deere Casting number C250R< li>
  • Casting No: C250R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205593)
$740.01
Cylinder Head, Remanufactured, D280R -
  • For John Deere tractor model D< li>
  • Replaces John Deere Casting number D280R< li>
  • Engine 501< li>
  • Cylinders: 2< li>
  • Casting No D280R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200275)
$1050.01
Cylinder Head, Remanufactured, F1306R -
  • For John Deere tractor model 70 (All Fuel)< li>
  • Replaces John Deere Casting number F1306R< li>
  • Cylinders: 2< li>
  • Casting No. F1306R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200291)
$980.01
Cylinder Head, Remanufactured, F1958R -
  • For John Deere tractor model 70< li>
  • Replaces John Deere Casting number F1958R< li>
  • Engine 376< li>
  • Diesel< li>
  • Cylinders: 2< li>
  • Casting No. F1958R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200290)
$900.01
Cylinder Head, Remanufactured, F2701R -
  • For John Deere tractor models 720, 730 (Gas)< li>
  • Replaces John Deere Casting number F2701R< li>
  • Engine 361< li>
  • Cylinders: 2< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200299)
$980.01
Cylinder Head, Remanufactured, F3211R -
  • For John Deere tractor models 720, 730 (Diesel)< li>
  • Replaces John Deere Casting number F3211R< li>
  • Engine 376< li>
  • Cylinders: 2< li>
  • Casting No. F3211R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200300)
$980.01
Cylinder Head, Remanufactured, F3350R -
  • For John Deere tractor models 720, 730 (All Fuel)< li>
  • Replaces John Deere Casting number F3350R< li>
  • Engine 376< li>
  • Cylinders: 2< li>
  • Casting No. F3350R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200302)
$980.01
Cylinder Head, Remanufactured, F486R -
  • For John Deere tractor models G, GH, GN, GW< li>
  • Replaces John Deere Casting number F486R< li>
  • Engines 413< li>
  • Cylinders: 2< li>
  • Casting No. F486R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200278)
$930.01
Cylinder Head, Remanufactured, F49R -
  • For John Deere tractor models G, GH, GN, GW< li>
  • Replaces John Deere Casting number F49R< li>
  • Engine 413< li>
  • Cylinders: 2< li>
  • Casting No F49R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200277)
$1225.01
Cylinder Head, Remanufactured, H110R, AH665R -
  • For John Deere tractor model H< li>
  • Replaces John Deere Casting number H110R< li>
  • Replaces John Deere OEM number AH665R< li>
  • Engine 99.5< li>
  • Cylinders: 2< li>
  • Not a welded head< li>
  • Casting No. H110R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 204047)
$465.01
Cylinder Head, Remanufactured, M3454T -
  • For John Deere tractor models 420, 430 (All Fuel)< li>
  • Replaces John Deere Casting number M3454T< li>
  • Engine 113< li>
  • Cylinders: 2< li>
  • Casting No. M3454T< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200294)
$324.01
Cylinder Head, Remanufactured, M4043T -
  • For John Deere tractor models 420, 430 (LP)< li>
  • Replaces John Deere Casting number M4043T< li>
  • Engine 113< li>
  • Cylinders: 2< li>
  • Casting No. M4043T< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200295)
$810.01
Cylinder Head, Remanufactured, R102952 -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 6610, 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8110, 8200, 8210, 8300 (late), 8310, 8400, 8410, 8560, 8570, 8760, 8770, 8870, 8960, 9100, 9200, 9300, 9400, 9510< li>
  • Compatible with John Deere Combine(s) 9500, 9510, 9550, 9600, 9610, 9650< li>
  • Compatible with John Deere Harvester(s) 9960, 9965, 9970, 9976< li>
  • Replaces John Deere Casting number R102952, R122112, R122419, R122491, R122492< li>
  • Engine 8.1L< li>
  • Cylinders: 6< li>
  • Casting No. R102952, R122112, R122419, R122491, R122492< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200355)
$1825.01
Cylinder Head, Remanufactured, R105704 -
  • For John Deere tractor model 7700< li>
  • Compatible with John Deere Harvester(s) 7450, 7800< li>
  • Replaces John Deere Casting number R105704< li>
  • Engine 466< li>
  • Cylinders: 6< li>
  • Casting No. R105704< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200354)
$1825.01
Cylinder Head, Remanufactured, R116836 -
  • For John Deere tractor models 5200, 5403, 6030 (with 531T), 7520 (late)< li>
  • Replaces John Deere Casting number R116836< li>
  • Engine 531< li>
  • Cylinders: 6< li>
  • Casting No. R116836< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200351)
$2525.01
Cylinder Head, Remanufactured, R119814 -
  • For John Deere tractor models 8570, 8770, 8870 (Diesel), 8970< li>
  • Compatible with John Deere Harvester(s) 6610, 6710, 6810, 6910< li>
  • Replaces John Deere Casting number R119814, R121675< li>
  • Engine 10.1L < li>
  • Cylinders: 6< li>
  • Casting No. R119814, R121675< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200352)
$2725.01
Cylinder Head, Remanufactured, R32040 -
  • For John Deere tractor model 3020< li>
  • Replaces John Deere Casting number R32040< li>
  • Diesel< li>
  • Engine 270< li>
  • Cylinders: 4< li>
  • Casting No. R32040< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200323)
$900.01
Cylinder Head, Remanufactured, R35140 -
  • For John Deere tractor models 5010, 5020< li>
  • Replaces John Deere Casting number R35140< li>
  • Diesel< li>
  • Engine 531< li>
  • Cylinders: 6< li>
  • Casting No. R35140< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200345)
$2525.01
Cylinder Head, Remanufactured, R40100 -
  • For John Deere tractor models 5010, 5020, 6030 (with 531D Diesel engine)< li>
  • Replaces John Deere Casting number R40100, R41867< li>
  • Engine 531< li>
  • Cylinders: 6< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200346)
$2525.01
Cylinder Head, Remanufactured, R40530 -
  • For John Deere tractor model 3010 (gas)< li>
  • Replaces John Deere Casting number R40530, R45160< li>
  • Engine 241< li>
  • Cylinders: 4< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200322)
$900.01
Cylinder Head, Remanufactured, R40550 -
  • For John Deere tractor models 4000, 4010, 4020, 4230, 4630 (Gas)< li>
  • Replaces John Deere Casting number R40550, R45180, R46080< li>
  • Engine 362< li>
  • Cylinders: 6< li>
  • Casting No. R40550, R45180, R46080< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200329)
$1825.01
Cylinder Head, Remanufactured, R43920 -
  • For John Deere tractor models 4320, 4520 (late), 4620, 4630, 7020 (early)< li>
  • Replaces John Deere Casting number R43920< li>
  • (Diesel)< li>
  • Engine 404< li>
  • Cylinders 6< li>
  • Casting No. R43920< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205509)
$1825.01
Cylinder Head, Remanufactured, R45190 -
  • For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4240, 4440, 4630 (Gas)< li>
  • Replaces John Deere Casting number R45190< li>
  • Engines 341, 362< li>
  • Cylinders: 6< li>
  • Casting No. R45190 (w block no. R40940 R49550)< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200328)
$790.01
Cylinder Head, Remanufactured, R48270 -
  • For John Deere tractor models 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere Casting number R48270, R86702< li>
  • Engine 531< li>
  • Cylinders: 6< li>
  • Casting No. R48270, R86702< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200350)
$2525.01
Cylinder Head, Remanufactured, R49R -
  • For John Deere tractor model R (Diesel)< li>
  • Replaces John Deere Casting number R49R< li>
  • Engine 415< li>
  • Cylinders: 2< li>
  • Casting No R49R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200284)
$1750.01
Cylinder Head, Remanufactured, R505387, RE507618 -
  • For John Deere tractor models 5045, 5055, 5065, 5075, 5103, 5104, 5203, 5204, 5310, 5403, 5410, 5503, 5610< li>
  • Replaces John Deere Casting number R505387< li>
  • Replaces John Deere OEM number RE507618< li>
  • Casting No. R505387< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205113)
$950.01
Cylinder Head, Remanufactured, R517486 -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520< li>
  • Replaces John Deere Casting number R517486, R129360, R130818< li>
  • Engine 8.1L< li>
  • Cylinders: 6< li>
  • Casting No. R517486, R130818, R129360< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203761)
$2025.01
Cylinder Head, Remanufactured, R520109 -
  • For John Deere tractor models 6230, 6330, 6430, 7130 (Starting in build year 2010)< li>
  • Compatible with John Deere Construction & industrial models 210, 210C, 230LC, 310K, 310L, 310SK, 310SL, 810D, 810E, 1010D, 1010E< li>
  • Compatible with John Deere Engine(s) 4045T< li>
  • Replaces John Deere Casting number R520109< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 210270)
$1500.01
Cylinder Head, Remanufactured, R520778, RE525458 -
  • For John Deere tractor model 6430< li>
  • Replaces John Deere Casting number R520778< li>
  • Replaces John Deere OEM number RE525458< li>
  • Casting No. R520778< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205444)
$1375.01
Cylinder Head, Remanufactured, R53200 -
  • For John Deere tractor model 4230 (early)< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Replaces John Deere Casting number R53200< li>
  • Diesel< li>
  • Engine 404< li>
  • Cylinders: 6< li>
  • Casting No. R53200< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200341)
$1825.01
Cylinder Head, Remanufactured, R58685 -
  • For John Deere tractor models 830, 1030, 1130, 1530, 1630, 2040, 2150, 2155, 2240, 2255, 2355N (Diesel)< li>
  • Compatible with John Deere Engine(s) 179, 3179< li>
  • Replaces John Deere Casting number R58685< li>
  • Engine 179< li>
  • Cylinders: 3< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200316)
$870.01
Cylinder Head, Remanufactured, R58686 -
  • For John Deere tractor models 820, 830, 930, 940, 1030, 1040, 1140, 1530, 1550, 1750, 1850, 2040, 2155, 2240 (Diesel)< li>
  • Compatible with John Deere Construction & industrial models 300< li>
  • Compatible with John Deere Hay Cutting(s) 930< li>
  • Replaces John Deere Casting number R58686< li>
  • Cylinders: 3< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200303)
$950.01
Cylinder Head, Remanufactured, R62143 -
  • For John Deere tractor models 2840, 2850, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155< li>
  • Compatible with John Deere Harvester(s) 7440, 9920< li>
  • Replaces Casting number R62143, R62153< li>
  • Engines 329, 359< li>
  • Cylinders: 6< li>
  • Casting No. R62143, R62153< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200319)
$1350.01
Cylinder Head, Remanufactured, R73272 -
  • For John Deere tractor model 8850< li>
  • Replaces John Deere Casting number R73272< li>
  • Engine 955< li>
  • Cylinders: V8< li>
  • Casting No. R73272< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200358)
$1825.01
Cylinder Head, Remanufactured, R74124 -
  • For John Deere tractor models 8630 (late), 8640 (late), 8650, 8760 (Diesel)< li>
  • Compatible with John Deere Harvester(s) 5460, 5640, 5820, 5830< li>
  • Replaces John Deere Casting number R74124, R100259, R121676, R81234, R86703< li>
  • Engine 619< li>
  • Cylinders: 6< li>
  • Casting No. R74124, R81234, R86703, R100259, R121676< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200348)
$2525.01
Cylinder Head, Remanufactured, R85685 -
  • For John Deere tractor model 9400< li>
  • Replaces John Deere Casting number R85685< li>
  • Engine 6068< li>
  • Cylnder: 6< li>
  • Casting No. R85685< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 204073)
$1050.01
Cylinder Head, Remanufactured, R86702 -
  • For John Deere tractor models 5200, 5400, 6030, 7520< li>
  • Replaces John Deere Casting number R86702< li>
  • Engine 531< li>
  • Cylinders: 6< li>
  • Casting No. R86702< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 207185)
$2525.01
Cylinder Head, Remanufactured, RE12975 -
  • For John Deere tractor models 4040 (Late), 4050 (eng s n 180011-later), 4240 (eng s n 180011-later)< li>
  • Compatible with John Deere Combine(s) 6620 (eng s n 197683-later), 6622 (eng s n 197683-later), 7720 (eng s n 197683-later)< li>
  • Compatible with John Deere Engine(s) 6404D (Late), 6466D (s n 267638-later)< li>
  • Replaces John Deere OEM number RE12975, SE501574, AR101937< li>
  • Replaces John Deere Casting number R75641, R86701< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203769)
$1650.01
Cylinder Head, Remanufactured, RE48617, R109534, R112747 -
  • For John Deere tractor models 6506, 6600, 6800, 6900, 7500< li>
  • Compatible with John Deere Construction & industrial models 544A, 544G, 570B, 624E, 624G, 640D, 648D, 655B, 670B, 672B, 690D, 690DR, 693D, 710B, 710C, 750B, 755B< li>
  • Compatible with John Deere Engine(s) 6059, 6068< li>
  • Replaces John Deere OEM number RE48617< li>
  • Replaces John Deere Casting number R109534, R112747< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 204497)
$1400.01
Cylinder Head, Remanufactured, RE521639 -
  • For John Deere tractor models 7130, 7230, 7330, 7430, 7630, 7730, 7830, 7930, 8100< li>
  • Compatible with John Deere Combine(s) 9560, 9570< li>
  • Replaces John Deere OEM number RE521639, SE501583< li>
  • Replaces John Deere Casting number R519581< li>
  • Casting No R519581< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205592)
$2025.01
Cylinder Head, Remanufactured, T11846T, AT11502 -
  • For John Deere tractor models 1010, 2010 (Gas)< li>
  • Replaces John Deere Casting number T11846T< li>
  • Replaces John Deere OEM number AT11502< li>
  • Engine 145, 165< li>
  • Cylinders: 4< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200308)
$890.01
Cylinder Head, Remanufactured, T12174T -
  • For John Deere tractor models 1010, 2010 (Gas.)< li>
  • Replaces John Deere Casting number T12174T< li>
  • Engines 115, 145< li>
  • Cylinders: 4< li>
  • Casting No. T12174T< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200309)
$790.01
Cylinder Head, Remanufactured, T13061 -
  • For John Deere tractor models 1010, 2010 (Gas)< li>
  • Replaces John Deere Casting number T13061< li>
  • Engine 115, 145< li>
  • Cylinders: 4< li>
  • Casting No. T13061< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200306)
$790.01
Cylinder Head, Remanufactured, T15959 -
  • For John Deere tractor models 1010, 2010 (Diesel)< li>
  • Replaces John Deere Casting number T15959< li>
  • Engine 145< li>
  • Cylinders: 4< li>
  • Casting No. T15959< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205506)
$2300.01
Cylinder Head, Remanufactured, T16280 -
  • For John Deere tractor models 1010, 2010 (Gas)< li>
  • Replaces John Deere Casting number T16280< li>
  • Engine 115, 145< li>
  • Cylinders: 4< li>
  • Casting No. T16280< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200307)
$790.01
Cylinder Head, Remanufactured, T17514, AT17377 -
  • For John Deere tractor models 1010, 2010 (Diesel)< li>
  • Replaces John Deere Casting number T17514< li>
  • Replaces John Deere OEM number AT17377< li>
  • Engine 165< li>
  • Cylinders: 4< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200310)
$2550.01
Cylinder Head, Remanufactured, T19974, AT21332 -
  • For John Deere tractor models 1020, 1520 (Gas)< li>
  • Compatible with John Deere Construction & industrial models 300B (Gas)< li>
  • Replaces John Deere Casting number T19974< li>
  • Replaces John Deere OEM number AT21332< li>
  • Fits John Deere Engine(s) 135, 152, 300 (Gas)< li>
  • Cylinders: 3< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200312)
$720.01
Cylinder Head, Remanufactured, T20471 -
  • For John Deere tractor model 4030< li>
  • Replaces John Deere Casting number T20471< li>
  • Engine 303< li>
  • Gas< li>
  • Cylinders: 6< li>
  • Casting No. T20471< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200334)
$980.01
Cylinder Head, Remanufactured, T24755, AR70583 -
  • For John Deere tractor models 1020, 1030, 1520, 1530, 2040 (Serial # Before - 349999)< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere Casting number T24755, R58585, R58586< li>
  • Replaces John Deere OEM number AR70583, AR70582< li>
  • Fits John Deere Engine(s): 135, 152, 300< li>
  • Cylinders: 3< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200311)
$485.01
Cylinder Head with Valses, Remanufactured, R75641 -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4440, 4450< li>
  • Compatible with John Deere Combine(s) 6620< li>
  • Replaces John Deere Casting number R75641< li>
  • Casting No. R75641< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205311)
$2525.01
Cylinder Head with Valves, Remanufactured, 274T95 -
  • For John Deere tractor model 1650< li>
  • Replaces John Deere Casting number 274T95< li>
  • Casting No. 274T95< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205440)
$1450.01
Cylinder Head with Valves, Remanufactured, AM876330 -
  • For John Deere tractor models 770, 870< li>
  • Replaces John Deere OEM number AM876330< li>
  • Replaces John Deere Casting number 3D82< li>
  • Casting No. 3D82< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205412)
$1650.01
Cylinder Head with Valves, Remanufactured, AM877263 -
  • For John Deere tractor models 870, 970, 1070< li>
  • Replaces John Deere OEM number AM877263, AM878615< li>
  • Replaces John Deere Casting number 4082< li>
  • Casting No. 4082< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205534)
$1200.01
Cylinder Head with Valves, Remanufactured, R102952 -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300 (s n 010000-later), 8400< li>
  • Compatible with John Deere Combine(s) 9510, 9610, 9650< li>
  • Replaces John Deere Casting number R102952, R122419, R122492< li>
  • Engine 8.1L< li>
  • Cylinders: 6< li>
  • Casting No. R102952, R122419, R122492< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203760)
$2675.01
Cylinder Head with Valves, Remanufactured, R129305 -
  • For John Deere tractor models 5300, 5500< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere Casting number R129305, R124844, R124845, R129657< li>
  • Engine: 179< li>
  • Cylinders: 3< li>
  • Casting No. R129305, R124844, R124845, R129657< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205136)
$1500.01
Cylinder Head with Valves, Remanufactured, R26030 -
  • For John Deere tractor models 3010, 3020 (both diesel with big injectors)< li>
  • Replaces Casting number R26030< li>
  • Engine 254< li>
  • Cylinders: 4< li>
  • Casting No. R26030< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205361)
$1650.01
Cylinder Head with Valves, Remanufactured, R34860 -
  • For John Deere tractor models 3010, 3020 (with pencil injectors)< li>
  • Replaces John Deere Casting number R34860< li>
  • Engines 270< li>
  • Cylinders 4< li>
  • Casting No. R34860< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205536)
$2525.01
Cylinder Head with Valves, Remanufactured, R35140 -
  • For John Deere tractor models 5010, 5020< li>
  • Replaces John Deere Casting number R35140< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 211009)
$4725.01
Cylinder Head with Valves, Remanufactured, R43920 -
  • For John Deere tractor models 4320, 4520 (late), 4620, 4630, 7020 (early)< li>
  • Replaces John Deere Casting number R43920< li>
  • Engine 404< li>
  • Cylinders: 6< li>
  • Casting No. R43920< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205373)
$2525.01
Cylinder Head With Valves, Remanufactured, R502120, RE505119 -
  • For John Deere tractor models 9200 (engine s n 003714-later), 9220, 9300 (engine s n 010638-later), 9300T (engine s n 010638-later), 9320, 9320T, 9400 (engine s n 010638-later), 9400T (engine s n 010638-later), 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) 9860< li>
  • Compatible with John Deere Harvester(s) 6750 (engine s n 010638-later), 6850 (engine s n 010638-later), 7300, 7400, 7500, 7700< li>
  • Replaces John Deere Casting number R502120, R504243, R515452< li>
  • Replaces John Deere OEM number RE505119, RE518554< li>
  • Engine: 12.5L< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203218)
$8075.01
Cylinder Head with Valves, Remanufactured, R50360 -
  • For John Deere tractor models 4430, 4630 (Diesel)< li>
  • Replaces John Deere Casting number R50360< li>
  • Engines 404< li>
  • Cylinders: 6< li>
  • Casting No. R50360< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 206135)
$2350.01
Cylinder Head with Valves, Remanufactured, R53200 -
  • For John Deere tractor model 4230< li>
  • Replaces John Deere Casting number R53200< li>
  • Engine 404< li>
  • Diesel< li>
  • Cylinders: 6< li>
  • Casting No. R53200< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203794)
$2525.01
Cylinder Head with Valves, Remanufactured, R57425 -
  • For John Deere tractor models 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830< li>
  • Replaces Casting number R57425< li>
  • Engines 619, 6619< li>
  • Cylinders: 6< li>
  • Casting No. R57425< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205184)
$3875.01
Cylinder Head with Valves, Remanufactured, R58673 -
  • For John Deere tractor models 4050 (late), 4250, 4430 (late), 4440, 4450, 4630 (late), 4640, 4650, 4840, 4850, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940< li>
  • Replaces John Deere Casting number R58673, R59876, R66434, R67906, R76315< li>
  • Engines 404, 466< li>
  • Cylinders: 6< li>
  • Casting No. R58673, R59876, R67906, R66434, R76315< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203774)
$2350.01
Cylinder Head with Valves, Remanufactured, R58686 -
  • For John Deere tractor models 830, 940, 1030, 1040, 1130, 1140, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2250, 2255 (Diesel)< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Compatible with John Deere Construction & industrial models 300< li>
  • Replaces John Deere Casting number R58686, R58685< li>
  • Engine 179< li>
  • Cylinders 3< li>
  • Casting No. R58686, R58685< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205537)
$1500.01
Cylinder Head with Valves, Remanufactured, R61035 -
  • For John Deere tractor models 2950, 2955, 3040, 3140, 3150, 3155, 3255, 4050 (early), 4250, 4450< li>
  • Compatible with John Deere Combine(s) 9400< li>
  • Compatible with John Deere Harvester(s) 7445, 9930< li>
  • Compatible with John Deere Engine(s) 6359DT< li>
  • Replaces John Deere Casting number R61035, R62140, R63693, R62143, R62153, R63694, R97629, R105704< li>
  • Cylinders: 6< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li>
  • Without water manifold< li>
  • With turbo< li> < UL> (Part No: 205179)
$2060.01
Cylinder Head with Valves, Remanufactured, R61521 -
  • For John Deere tractor models 4050 (late), 4250, 4430 (late), 4440, 4450, 4630 (late), 4640, 4650, 4840, 4850, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940< li>
  • Replaces John Deere Casting number R61521< li>
  • Engines 404, 466< li>
  • Cylinders: 6< li>
  • Casting No. R61521< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205673)
$2525.01
Cylinder Head with Valves, Remanufactured, R62143 -
  • For John Deere tractor models 2840, 2850, 2940, 2950, 2955, 3055, 3150, 3155 (Diesel)< li>
  • Replaces John Deere Casting number R62143, R62153< li>
  • Engines 329, 359< li>
  • Cylinders: 6< li>
  • Casting No. R62143, R62153< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205178)
$2000.01
Cylinder Head with Valves, Remanufactured, RE35279 -
  • For John Deere tractor models 2020, 2030, 2350, 2355, 2440, 2450, 2510, 2520, 2530, 2550, 2555, 2630, 2640 (Diesel)< li>
  • Replaces John Deere OEM number RE35279< li>
  • Replaces John Deere Casting number CD16202, R54052, R54560, R57078, T23486, T24756, R56790< li>
  • Engine 202, 219, 239, 276, 4219, 4239, 4276< li>
  • Cylinders: 4< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 203813)
$1700.01
Cylinder Head with Valves, Remanufactured, RE507618 -
  • For John Deere tractor models 5045, 5055, 5065, 5075, 5103, 5104, 5203, 5204, 5303, 5310, 5403, 5410, 5503, 5610< li>
  • Replaces John Deere OEM number RE507618< li>
  • Replaces John Deere Casting number R505387< li>
  • Casting No. R505387< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205340)
$1500.01
Cylinder Head with Valves, Remanufactured, T11846T -
  • For John Deere tractor models 1010, 2010 (Gas)< li>
  • Replaces John Deere Casting number T11846T< li>
  • Engines 115, 145< li>
  • Cylinders: 4< li>
  • Casting No. T11846T< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205166)
$980.01
Cylinder Head With Valves, Remanufactured, T17514 -
  • For John Deere tractor models 1010, 2010 (Diesel)< li>
  • Replaces John Deere Casting number T17514< li>
  • Engine 145< li>
  • Cylinders: 4< li>
  • Casting No. T17514< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 204304)
$2775.01
Cylinder Head, w/ Valves, Remanufactured, T24755, AR70583 -
  • For John Deere tractor models 1020, 1030, 1520, 1530, 2040 (Serial # Before - 349999)< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere Casting number T24755, R58685, R58686< li>
  • Replaces John Deere OEM number AR70583, AR70582< li>
  • Not a Welded Head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 210370)
$810.01
Cylinder Kit -
  • For John Deere tractor models 7220, 7320, 7420, 7520, 7720, 7820< li>
  • Compatible with John Deere Combine(s) 9550, 9560, 9560 SH, 9560 WTS< li>
  • Compatible with John Deere Harvester(s) 9970< li>
  • Compatible with John Deere Construction & industrial models 240DLC, 460DC, 460DG, 624J, 643J, 670CH II, 670D, 672CH II, 672D, 1070D< li>
  • Replaces John Deere OEM number RE516228< li>
  • 1.625" Piston Pin Diameter< li> < UL> (Part No: 167320)
$160.00
Cylinder Kit -
  • For John Deere tractor models 8650, 8760< li>
  • Compatible with John Deere Harvester(s) 5820, 5830< li>
  • Compatible with John Deere Construction & industrial models 744E, 850, 855, 862, 862B, 890A, 992D LC< li>
  • Compatible with John Deere Engine(s) 6101A, 6101H, 6619A, 6619T< li>
  • Replaces John Deere OEM number RE40476< li> < UL> (Part No: 167479)
$198.00
Cylinder Plate - For tractor models 2010, 40, 45 with 165 CID. Verify part number. This is a Special Order item and NON-RETURNABLE. (Part No: AT15762)$2,402.44
Dampener Pulley -
  • For John Deere tractor models 2955, 3055, 3155, 3255, 3350, 3650< li>
  • Replaces John Deere OEM number RE26920< li> < UL> (Part No: 157752)
$156.50
Dampener Pulley -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T< li>
  • Compatible with John Deere Combine(s) CTS (s n 500000-later), 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Engine(s) 6076A (s n 499999-earlier), 6076H (s n 499999-earlier), 6076T (s n 499999-earlier), 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number RE24975< li> < UL> (Part No: 167164)
$265.00
Differential Pinion Gear -
  • For John Deere tractor models 4000, 4020, 4050 (s n 2725-later Power Shift), 4055 (86mm Axle), 4230 (s n 26189-later With 51mm Wide Gear), 4240, 4250 (s n 1000-later), 4255 (With 86mm Axle), 4320, 4430 (s n 40771-later), 4455< li>
  • Replaces John Deere OEM number R116821, R108996, R59929< li>
  • Teeth: 21< li>
  • Width: 2.010"< li> < UL> (Part No: 125655)
$237.30
Differential Pinion Gear -
  • For John Deere tractor models 4000 (s n 15452-earlier), 4020, 4230 (s n 15452-earlier), 4320 (s n 15452-earlier), 4430 (s n 21269-earlier), 7520 (Front Axle Only)< li>
  • Compatible with John Deere Construction & industrial models 570, 600, 644< li>
  • Replaces John Deere OEM number R33004< li>
  • Teeth: 21< li>
  • Width: 1.510"< li> < UL> (Part No: 125657)
$92.40
Direct Drive Clutch Drum -
  • For John Deere tractor models 6110 (s n 392758-earlier), 6110L (s n 392758-earlier), 6120 (s n 392758-earlier), 6120L (s n 392758-earlier), 6150M, 6170M, 6200, 6200L, 6210 (s n 392758-earlier), 6210L (s n 392758-earlier), 6215 (s n 392758-earlier), 6220 (s n 392758-earlier), 6220L (s n 392758-earlier), 6300, 6300L, 6310 (s n 392758-earlier), 6310L (s n 392758-earlier), 6310S (s n 392758-earlier), 6320 (s n 392758-earlier), 6320L (s n 392758-earlier), 6400, 6400L, 6410 (s n 392758-earlier), 6410L (s n 392758-earlier), 6410S (s n 392758-earlier), 6415 (s n 392758-earlier), 6420 (s n 392758-earlier), 6420L (s n 392758-earlier), 6500, 6500L, 6510L (s n 392758-earlier), 6510S (s n 392758-earlier), 6520L (s n 392758-earlier), 6615 (s n 392758-earlier), 6715 (s n 392758-earlier), 7200, 7210 (s n 139492-later), 7220 (s n 345451-earlier), 7320 (s n 345451-earlier), 7400, 7410 (s n 139492-later), 7420 (s n 345451-earlier), 7510 (s n 139492-later), 7520 (s n 345451-earlier), 7600, 7610 (s n 089999-earlier), 7700, 7710, 7720 (s n 345451-earlier), 7800, 7810, 7815 (s n 053261-earlier), 7820 (s n 345451-earlier)< li>
  • Replaces John Deere OEM number RE226393, RE156447< li>
  • Replaces Casting number R153300< li> < UL> (Part No: 158309)
$950.00
Disc Hi-Lo Clutch -
  • For John Deere tractor models 2155, 2240 (s n 350000-later), 2355, 2440 (s n 341000-later), 2555, 2640 (s n 341000-later), 2755, 2855, 2940, 2950, 3055, 3155 (With hi-lo Clutch), 3255 (All With hi-lo Transmission)< li>
  • Replaces John Deere OEM number AL38238, AL30687< li>
  • I.D.: 6.608"< li>
  • O.D.: 7.560"< li> < UL> (Part No: 119990)
$25.00
Driven Shaft -
  • For John Deere tractor models 5200 (s n 520106 - later with syncornized transmission), 5200 (s n 520107 - later with collar shift transmission), 5210, 5220, 5300 (s n 530189 - later with collar shift transmission), 5300 (s n 530194 - later with syncronized transmission), 5310, 5320, 5400 (s n 540205 - later with syncronized transmission), 5400 (s n 540206 - later with collar shift transmission), 5403, 5410, 5415, 5420, 5500 (with collar shift or syncronized transmissions), 5510, 5520, 5605, 5615, 5705, 5715< li>
  • Replaces John Deere OEM number R136338, R133074, R130362, R138266< li> < UL> (Part No: 173836)
$168.00
Drive Shaft Torsional Dampener -
  • For John Deere tractor models 6200, 6300, 6400, 6500< li>
  • Replaces John Deere OEM number AL79074< li> < UL> (Part No: 167896)
$840.00
Drum, High Range -
  • For John Deere tractor models 2510, 2520, 3020 (U, s n 122999-earlier), 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4455 (Mexico)< li>
  • Replaces John Deere OEM number R63072< li> < UL> (Part No: 165807)
$207.00
Engine Assembly, Basic Block, Remanufactured, 7.6L, SE500211, R109777, -
  • For John Deere tractor models 4055 (engine s n 499999-earlier), 4255 (engine s n 499999-earlier), 4455 (engine s n 499999-earlier)< li>
  • Compatible with John Deere Engine(s) 6076< li>
  • Replaces John Deere OEM number SE500211< li>
  • Replaces John Deere Block Casting number R109777< li>
  • Replaces engine build codes: 6076TRW01, 6076TRW02, 6076TRW03, 6076TRW04, 6076TRW06, 6076TRW08< li>
  • Our John Deere remanufactured engines are built by certified John Deere mechanics to stringent John Deere quality specifications using only genuine OEM parts. < li>
  • Every John Deere remanufactured engine core is completely disassembled, cleaned and inspected. Every part must pass rigorous quality standards. < li>
  • Remanufactured blocks include the following OEM parts: block, balancing shafts, crankshaft, connecting rods, bearings, cylinder kit, camshaft, bushings, front gear train, gasket kit< li>
  • Our Basic Blocks also include: cylinder head, valve train kit, rocker arm assembly, valve cover, oil pump assembly, oil cooler, oil pan, oil filter housing with filter, water pump, front cover and are finished with green or yellow paint< li> < UL> (Part No: 203008)
$15775.01
Exhaust Valve -
  • For John Deere tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4850, 7020, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6602, 6620, 6622, 7720, 7722, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5440, 5720, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B, 693C, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 844, 850B< li>
  • Replaces John Deere OEM number R50357< li>
  • 1.710" Head Diameter< li>
  • 6.208" Length< li>
  • 30 degree< li> < UL> (Part No: 128677)
$18.50
Exhaust Valve Insert -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number R85687< li> < UL> (Part No: 123958)
$6.66
Exhaust Valve Insert -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number R93910< li> < UL> (Part No: 123959)
$9.20
Exhaust Valve Seat -
  • For John Deere tractor models 600, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4250, 4320, 4440, 4450, 4520, 4620< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 6622, 7700, 7720< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 510, 644A, 646, 646B, 690, 690A< li>
  • Replaces John Deere OEM number R43681< li> < UL> (Part No: 167424)
$6.47
Fan Drive Pulley -
  • For John Deere tractor models 4050 (s n 006509-earlier), 4250, 4450< li>
  • Replaces John Deere OEM number R90331, R71019< li>
  • Double Groove< li> < UL> (Part No: 164884)
$165.51
Fan Idler Pulley -
  • For John Deere tractor models 6110, 6110L, 6120, 6210, 6210L, 6215, 6220, 6230, 6310, 6310L, 6310S, 6320, 6320L, 6330, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6430, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7130, 7220, 7230, 7320, 7330, 7420, 7430, 7520, 7530< li>
  • Replaces John Deere OEM number AL157593< li> < UL> (Part No: 169841)
$35.00
First Planetary Brake Gear -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Replaces John Deere OEM number R112073< li> < UL> (Part No: 115251)
$299.30
Float Valve - Stainless steel needle float valve~ hard chrome needle. For: A, B, C, D, G series~ 50, 60 all fuel. Replaces AR10077. For 50, 60, A, B, C, D, G (Part No: 183782)		$16.50
Flywheel - With Ring Gear - 12 Square Pin Hole Style For 3010, 3020, 4000, 4010, 4020Diesel with Syncro Transmission. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101907)		$400.00
Flywheel - With Ring Gear - 13 1 2 For 4320 with Casting number R46045. (Part No: 101908)		$537.90
Flywheel Cover Guard -
  • For John Deere tractor model A (s n 499000-583999 1941-1948)< li>
  • Replaces John Deere OEM number AA3156R< li> < UL> (Part No: 126485)
$157.00
Flywheel Dowel Pin - This Flywheel Dowel is used with AR40565 flywheel. Three used per tractor. Replaces R40731 (Part No: R40731)$38.89
Flywheel Less Ring Gear -
  • For John Deere tractor models 2040S, 2130, 2140, 2250, 2350 (s n 463069-later with single clutch), 2355N, 2450, 2550, 2555, 2750, 2755, 2840, 2850, 2855N, 2940 (s n 415943-earlier), 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640< li>
  • Replaces John Deere OEM number AT26482, AR92508, RE18678< li>
  • Replaces John Deere Casting number R70490, R76532, R80986< li>
  • Ring gear not included< li>
  • I.D.: 13"< li>
  • Fits with 12", 12-5 8", and 12-7 8" pressure plate assemblies< li>
  • For ring gear use Item #: 103943< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 150750)
$380.00
Flywheel Ring Gear - This Flywheel Ring Gear has 132 Teeth and a 12.375 inch inside diameter. It is used on John Deere 1010 and 2010. (Part No: 124939)		$117.40
Flywheel Ring Gear -
  • For John Deere tractor models 1250, 1450, 1650< li>
  • Replaces John Deere OEM number CH16795< li>
  • Teeth: 136< li>
  • ID: 12.433"< li> < UL> (Part No: 152378)
$80.90
Flywheel Ring Gear -
  • For John Deere tractor models 5010, 5020, 6030, 7520, 8630, 8640, 8650, 8760, 8770, 8870, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520T, 9620T< li>
  • Compatible with John Deere Combine(s) 9860 STS< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5460, 5820, 5830, 6710, 6750, 6850, 7400, 7500< li>
  • Compatible with John Deere Construction & industrial models 450C, 644B, 646, 646B, 700A, 744E, 744H, 744J, 760, 762, 770, 772A, 844, 850, 855, 860B, 862, 890, 890A, 990, 992< li>
  • Replaces John Deere OEM number AR103044, R35047< li>
  • Replaces John Deere Casting number R76000< li>
  • 147 Teeth< li>
  • 17.406" I.D.< li>
  • 18.595" O.D.< li>
  • 0.73" Wide< li> < UL> (Part No: 159162)
$194.00
Flywheel with Ring Gear - For tractor models JD500, JD500A, JD500B, JD600, 3010, 3020, 4010, 4020, 500C, ALL WITH DIESEL SYNCRO TRANS., FOR SQUARE PIN HOLE STYLE FLYWHEELS. Flywheel with #R28811 Ring Gear. 82 lbs. Additional $30.00 shipping due to weight. This additional charge will be added to your order. (Part No: 101907)		$400.00
Flywheel with Ring Gear - For tractor models 2040S, 2140, 2250, 2355, 2450, 2550, 2555, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 3640. 142 Teeth, 0.850 inch Flywheel Step. 13.010 inch inside diameter. Flywheel with Ring Gear replaces AT26482, AR92508; Marked R80986, R70490, R76532 Marked R80985, R70490, R75432. Additional $25.00 shipping due to weight. This additional charge will be added to your order. (Part No: 103941)		$380.00
Flywheel with Ring Gear -
  • For John Deere tractor models 2030 (s n 187301 - later), 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 401B, 401D, 480B (s n 1193100 - later)< li>
  • Replaces John Deere OEM number AR66781, R114282< li>
  • Replaces Casting number R56355< li>
  • Teeth: 142< li> < UL> (Part No: 156824)
$860.00
Flywheel With Ring Gear -
  • For John Deere tractor models 830, 840 (s n 350000-later), 930, 940 (s n 350000-later), 1030, 1040 (s n 350000-later), 1130 (s n 350000-later), 1130, 1140 (s n 350000-later), 1350 (s n 350000-later), 1550 (s n 350000-later), 1630, 1750 (s n 350000-later), 1850 (s n 350000-later), 1950 (s n 350000-later), 2040 (s n 350000-later), 2150 (with dual stage clutch), 2155 (with continuous running pto), 2240 (s n 350000-later), 2255 (with dual stage clutch)< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Replaces John Deere OEM number AR92506< li>
  • Replaces John Deere Casting number R70488, R80867< li>
  • Teeth: 142< li> < UL> (Part No: 121431)
$703.50
Flywheel With Ring Gear -
  • For John Deere tractor models 500, 600, 3010 (s n 049999-earlier), 3020, 4000 (s n 201000-later), 4020< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 152141-earlier), 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR53380, AR34238, AR40563< li>
  • Replaces John Deere Casting number R31638, R40729, R49529< li>
  • Teeth: 129< li>
  • Diesel< li>
  • Power Shift Transmission< li> < UL> (Part No: 128160)
$925.00
Flywheel With Ring Gear -
  • For John Deere tractor models 4520 (with syncro range trasmission), 4620 (with syncro range trasmission), 7020 (with syncro range trasmission)< li>
  • Replaces John Deere OEM number AR56075, AR43013< li>
  • Replaces John Deere Casting number R43110, R51870< li>
  • 129 Teeth< li> < UL> (Part No: 159163)
$900.00
Flywheel With Ring Gear -
  • For John Deere tractor models 3055, 3155, 3255< li>
  • Replaces John Deere OEM number RE31572< li>
  • Replaces John Deere Casting number L59356< li>
  • 142 Teeth< li>
  • .1.100" Flywheel Step< li> < UL> (Part No: 159174)
$611.60
Flywheel With Ring Gear -
  • For John Deere Construction & industrial models 400G, 450B, 450C, 450D, 450E, 455D, 455E< li>
  • Replaces John Deere OEM number RE51448, AR50389< li>
  • Replaces John Deere Casting number R47610< li>
  • 142 Teeth< li>
  • For Replacement Gear use Item #: 103943< li> < UL> (Part No: 159179)
$703.50
Friction Disc -
  • For John Deere tractor models 830 (3 Cyl), 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2255, 2350, 2440, 2550, 2630, 2640, 2840, 3030, 3120 (Compact), 3130< li>
  • Replaces John Deere OEM number AT101001, AL38240< li>
  • Teeth: 45< li>
  • O.D.: 5-1 4"< li> < UL> (Part No: 127043)
$9.46
Friction Disc -
  • For John Deere Construction & industrial models 450, 455, 550, 555< li>
  • Replaces John Deere OEM number T82355< li>
  • O.D.: 10.89"< li>
  • Teeth: 38< li> < UL> (Part No: 127154)
$49.50
Gear - Transmission Clutch Oil Pump -
  • For John Deere tractor models 2510, 2520, 3020 (s n 122999), 4000 (s n 201000-later), 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Construction & industrial models 500C, 510, 540B< li>
  • Replaces John Deere OEM number R48176< li> < UL> (Part No: 125908)
$485.00
Governor Shaft Bearing - This Governor Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Part No: 172930)		$36.00
Head Bolt -
  • For John Deere tractor models 3010, 3020, 4000 (sn:201000-later), 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6620, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950< li>
  • Compatible with John Deere Construction & industrial models 690B, 693C, 740< li>
  • Replaces John Deere OEM number R88043< li> < UL> (Part No: 158360)
$7.20
Head Bolt -
  • For John Deere tractor models 3010, 3020, 4000 (s n 201000-later), 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6620, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9950< li>
  • Compatible with John Deere Construction & industrial models 690B, 693C, 740< li>
  • Replaces John Deere OEM number R88044< li>
  • Diameter: 0.562"< li>
  • Thread: UNRC2A< li>
  • Length: 6.280"< li>
  • Thread Length: 1.614"< li>
  • Body or Point Diameter: 0.504"< li>
  • Body Length: 0.331"< li> < UL> (Part No: 158361)
$8.40
Head Bolt -
  • For John Deere tractor models 500, 3010, 3020, 4000, 4010, 4020, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4955, 4960, 5720, 6620, 7020, 7720, 8430, 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8960< li>
  • Compatible with John Deere Combine(s) 1085, 1177, 1177H4, 1188, 1188H4, 6620, 6622, 7720, 8820, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 9940, 9950, 9960< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 510, 540E, 548E, 640E, 644A, 644C, 644D, 644E, 644ER, 646, 646B, 646C, 648E, 653E, 690, 690A, 690B, 690C, 693B, 693C, 740, 740A, 740E, 743, 748E, 762A, 762B, 770A, 770AH, 770B, 770BH, 772A, 772AH, 772B, 772BH, 790, 790D, 792, 850B< li>
  • Replaces John Deere OEM number R88045, R62420< li>
  • Diameter: 0.562"< li>
  • Thread: UNRC2A< li>
  • Length: 7.402"< li>
  • Thread Length: 1.614"< li>
  • Body or Point Diameter: 0.504"< li>
  • Body Length: 0.331"< li> < UL> (Part No: 158362)
$9.66
Head Bolt -
  • For John Deere tractor models 9120, 9220, 9320, 9320T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) 9860 STS, 9880 STS (sn:715700-earlier)< li>
  • Compatible with John Deere Engine(s) 6081HRW03, 6105 (AF001 (PowerTech 10.5L), 6125 (HRW13, HRW15, HRW16, HRW17, HRW18), 6125 (HH003, HH006), 6125 (AF001 (PowerTech 12.5L), 6125 (HF070 (PowerTech 12.5L)(sn:030000-later)(Waterloo)< li>
  • Replaces John Deere OEM number R519524< li> < UL> (Part No: 158843)
$18.50
Head Bolt -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8640, 8650, 8760, 8960< li>
  • Compatible with John Deere Combine(s) 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9960< li>
  • Compatible with John Deere Engine(s) 6076 (s n 499999-earlier), 6076AF (M Marine s n 499999-earlier), 6090 (9.0 L Contruction and Forestry Applications), 6090 (9.0L Tier 3 Power Teck Plus), 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R121322, DZ100946, R88045< li>
  • Diameter: 0.562"< li>
  • Thread: UNC2A< li>
  • Length: 7.323"< li>
  • Thread Length: 6.496"< li>
  • Flange Diameter: 1.091"< li>
  • Head Height: 0.630"< li> < UL> (Part No: 159236)
$8.06
Head Bolt Kit -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9200, 9300, 9400< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 9500, 9510, 9550, 9550 SH, 9600, 9610, 9650, 9650 STS, 9750 STS< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 9960, 9965, 9970, 9976, 9986< li>
  • Replaces John Deere OEM number RG24026< li> < UL> (Part No: 155874)
$184.00
Head Bolt Kit -
  • For John Deere tractor model 3020 (s n 123000-later)< li>
  • Compatible with John Deere Construction & industrial model 500A, 500B, 500C, 510< li>
  • Compatible with John Deere Engine(s) 270 (Diesel, s n 280000-later)< li>
  • Replaces John Deere Block Casting number R50610, R40620, R40700, R40910, R45950, R48430< li> < UL> (Part No: 156467)
$72.00
Head Bolt Kit -
  • For John Deere tractor models 600, 4010, 4020, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Combine(s) 105< li>
  • Compatible with John Deere Engine(s) 381 (Diesel), 404 (Diesel)< li>
  • Replaces John Deere OEM number AR44793< li>
  • Grade 8< li>
  • Torque to 130 lb-ft< li> < UL> (Part No: 161667)
$300.00
Head Bolt Kit -
  • For John Deere tractor models 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 340D, 344E, 410C, 440C, 440D, 444E, 448D, 450E, 450G, 455E, 455G, 490D, 493D, 495D, 510B, 510C, 540B, 540D, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 590D, 595, 595D, 610B, 610C, 650G< li>
  • Replaces John Deere OEM number R53223, R85363, T20168< li> < UL> (Part No: 169014)
$161.00
Head Bolts -
  • For John Deere tractor models 3010 (Grove & Orchard, Row-Crop Standard & Utility Tractors), 3020 (s n 122999-earlier, Utility Tractor), 4010, 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number R42464< li> < UL> (Part No: 158344)
$19.90
Head Bolts -
  • For John Deere tractor models 3010 (Grove & Orchard, Row-Crop Standard & Utility Tractors), 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number R42463< li> < UL> (Part No: 158345)
$20.76
Head Bolts -
  • For John Deere tractor models 3010, 3020 (sn:122999-earlier), 4010, 4020 (sn:200999-earlier)< li>
  • Replaces John Deere OEM number R42462< li>
  • 9 16" X 3"< li> < UL> (Part No: 158346)
$21.26
Heat Exchanger - For tractor models 60, 620, 630, 70, 720, 730. Replaces BMD# BH-A4644R. (Part No: 101593)		$24.00
High Range Pinion -
  • For John Deere tractor models 4000, 4020, 4230< li>
  • Replaces John Deere OEM number R41218< li> < UL> (Part No: 127293)
$213.00
Hi-Lo Brakes & Clutch Assembly Disc -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 7600, 7700, 7800 (All With Powershift Transmission), 8560, 8570, 8760, 8770, 8870, 8960, 8970 (All With 24 Speed Power Sync Transmission)< li>
  • Replaces John Deere OEM number RE33706, AR94518, R94371< li>
  • I.D.: 8.430"< li>
  • O.D.: 9.530"< li> < UL> (Part No: 118430)
$37.50
Hi-Lo Clutch Plate -
  • For John Deere tractor models 2155, 2240 (s n 350000-later), 2355, 2440 (s n 341000-later), 2555, 2640 (s n 341000-later), 2755, 2855, 2940, 2955, 3055, 3155, 3255 (All With Hi-Lo Transmission)< li>
  • Replaces John Deere OEM number L33163< li>
  • I.D.: 6.625"< li>
  • O.D.: 7.550"< li> < UL> (Part No: 127058)
$16.47
Hi / Lo PTO Clutch Plate -
  • For John Deere tractor models 2155 (with hi-lo transmission), 2355 (with hi-lo transmission), 2555 (with hi-lo transmission), 2755 (with hi-lo transmission), 2855 (with hi-lo transmission), 2950 (with hi-lo transmission), 2955 (with hi-lo transmission), 3055 (with hi-lo transmission), 3155 (with hi-lo transmission), 3255 (with hi-lo transmission)< li>
  • Replaces John Deere OEM number AL69559, AL38239, 3917221R< li>
  • Splines: 45 Internal< li>
  • O.D.: 5-1 4"< li> < UL> (Part No: 120849)
$11.36
Idler Pulley -
  • For John Deere tractor models 4720, 7610, 7710, 7720, 7810, 7820, 7920, 8120, 8220, 8320, 8420, 8520, 9100, 9200, 9300, 9300T, 9400, 9400T< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, S550, S660, S670, S670HM, 9510, 9510 SH, 9550, 9550 SH, 9560 STS, 9570 STS, 9610, 9650, 9650 STS, 9660, 9660 CTS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS< li>
  • Replaces John Deere OEM number RE505265< li>
  • Fan Idler Pulley< li> < UL> (Part No: 162012)
$45.00
Inner Spline Transmission Friction Disc -
  • For John Deere tractor models SE6010, SE6020, SE6100 (Power Reverser Transmission), SE6110, SE6120, SE6200, SE6210, SE6220, SE6300 (Power Reverser Transmission), SE6310, SE6320, SE6400 (Power Reverser Transmission), SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, SE6920, 1654, 1854, 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820, 6010, 6020, 6090MC, 6090RC, 6095MC, 6095RC, 6100, 6100MC, 6100RC, 6105M, 6105MC, 6105R, 6105RC, 6110, 6110J, 6110L, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115R, 6115RC, 6120, 6120L, 6120M, 6120R, 6125J, 6125M, 6125R, 6130, 6130J, 6130M, 6130R, 6135M, 6135R, 6140J, 6140M, 6140R, 6145J, 6145M, 6145R, 6150M, 6150R, 6150RH, 6155J, 6155M, 6155R, 6155RH, 6165J, 6170M, 6170R, 6175M, 6175R, 6180J, 6190R, 6195M, 6195R, 6200, 6200L, 6210, 6210L, 6210R, 6215, 6215R, 6220, 6220L, 6225 (Power Reverser Transmission), 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6400, 6400L, 6405 (Power Reverser Transmission), 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6430, 6500, 6500L, 6505, 6506, 6510, 6510L, 6510S, 6515 (Power Reverser Transmission), 6520, 6520L, 6525 (Power Reverser Transmission), 6530, 6534, 6600, 6605 (Power Reverser Transmission), 6610, 6615, 6620, 6630, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920, 6920S, 6930, 7130, 7185J, 7200, 7200R, 7205J, 7210, 7210R, 7215R, 7220, 7225J, 7230, 7230R, 7320, 7330, 7400, 7405, 7410, 7420, 7425, 7430, 7500, 7505, 7510, 7515, 7520, 7525, 7530, 7600, 7610, 7630, 7700, 7710, 7715, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number RE48092, RE321696< li>
  • ID: 9-3 16" (240mm)< li>
  • OD: 11-5 8" (295mm)< li>
  • Thickness: .118" (3mm)< li>
  • Teeth: 95< li> < UL> (Part No: 122439)
$31.00
Input Planetary Piston Plate -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4755, 4760, 4850, 4955, 4960 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R71162< li>
  • O.D.: 10.820"< li>
  • I.D.: 8.437"< li> < UL> (Part No: 127111)
$25.20
Input Planetary Plate -
  • For John Deere tractor models 2510 (With Powershift), 2520 (With Powershift), 3020 (With Powershift), 4000 (s n 201000-later Less PTO), 4020 (s n 201000-later Less PTO), 4040 (Powershift), 4050 (With Powershift), 4055, 4230 (With Powershift), 4255, 4430 (s n 044988-earlier With Powershift), 4450 (With Powershift), 4455, 4555, 4560, 4755, 4760, 4850 (With Powershift), 4955, 4960, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Construction & industrial models 400, 410, 450, 455, 500, 510, 550, 555, 600, 650, 710, 710D< li>
  • Replaces John Deere OEM number R46391, R33873, R80813< li>
  • O.D.: 7.032"< li>
  • I.D: 4.752"< li> < UL> (Part No: 127086)
$18.30
Intake and Exhaust Valve -
  • For John Deere tractor models 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Harvester(s) 6750, 6850, 7300, 7400, 7500, 7700< li>
  • Compatible with John Deere Construction & industrial models 450CLC, 744H, 744J, 824J< li>
  • Replaces John Deere OEM number R122035, R121813, R516892< li> < UL> (Part No: 167039)
$28.26
Intake Valve -
  • For John Deere tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450< li>
  • Compatible with John Deere Construction & industrial models 644, 646, 690, 693, 740, 743, 762, 770, 772, 790, 792, 850< li>
  • Replaces John Deere OEM number R50358< li> < UL> (Part No: 128721)
$14.10
Intake Valve -
  • For John Deere tractor models 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere OEM number R43914< li>
  • 30 degree valve< li> < UL> (Part No: 156102)
$7.50
Intake Valve -
  • For John Deere tractor models 3010, 3020, 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4440, 4450, 4520< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 6622, 7700, 7720< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600, 644A, 690, 690A< li>
  • Replaces John Deere OEM number R43883< li>
  • 45 degree valve< li> < UL> (Part No: 166189)
$13.26
Intake Valve -
  • For John Deere tractor models 2140, 2355N, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255< li>
  • Compatible with John Deere Combine(s) 4420, 4425, 4435, 9400< li>
  • Compatible with John Deere Harvester(s) 484, 7440, 9920, 9930< li>
  • Compatible with John Deere Construction & industrial models 310C, 315C, 340D, 344E, 410C, 440C, 440D, 444D, 444E, 448D, 450D, 450E, 450G, 455D, 455E, 455G, 490, 490D, 493D, 495D, 510B, 510C, 515B, 540B, 540D, 544B, 544C, 544D, 544E, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570B, 590D, 595, 595D, 610B, 610C, 624E, 640, 640D, 648D, 650G, 655, 655B, 670, 670A, 670B, 672A, 672B, 690D, 690DR, 693D, 710B, 710C, 750, 750B, 755, 755A, 755B< li>
  • Replaces John Deere OEM number R83071, R89219< li> < UL> (Part No: 167253)
$11.40
Intake Valve Insert -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number R98063< li> < UL> (Part No: 123956)
$6.96
Intake Valve Insert -
  • For John Deere tractor models 5410, 5415, 5420, 5425, 5510, 5520, 5525, 5615, 5625, 5715, 5725, 6010, 6110, 6205, 6210, 6310, 6405, 6410, 6505, 6510, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 210, 230, 270, 310, 315, 344, 410, 444, 444H, 450, 455, 485, 486, 488, 540, 544, 548, 550, 555, 624, 640, 643, 648, 650, 670, 672, 700, 710D, 843, 850< li>
  • Replaces John Deere OEM number R98335< li> < UL> (Part No: 123957)
$20.50
Intake Valve Seat, Std -
  • For John Deere tractor models 600, 3020, 4000, 4020, 4040, 4050, 4230, 4240, 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Combine(s) 105, 6600, 6602, 6620, 7700< li>
  • Compatible with John Deere Harvester(s) 5200< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 510, 644, 644A, 646, 690, 690A< li>
  • Compatible with John Deere Engine(s) 6404A, 6404T, 6466D< li>
  • Replaces John Deere OEM number R43680< li> < UL> (Part No: 167188)
$7.10
Lifter - Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W SN 253373>, & 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T A), 4440 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4450 (6.466T W SN 253373>, & 6.466A SN 317859>), 4520 (SN <335845, 6.404T A), 4620 (SN <335845, 6.404T A), 4630 (SN 335845>, 6.404T A), 4640 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4650 (6.466T W SN 253373>, & 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, & 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, & 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, & 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Part No: 112420)		$7.00
Lifter, Remanufactured, R1354R -
  • For John Deere tractor models 620, 630< li>
  • Replaces John Deere OEM number R1354R< li> < UL> (Part No: 204240)
$24.26
Load Sensing Shaft -
  • For John Deere tractor models 4000 (s n 250001-later), 4020 (s n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455< li>
  • Replaces John Deere OEM number R46513, AR41773< li>
  • 21.187" Long< li>
  • 1.124" Diameter< li> < UL> (Part No: 112006)
$75.00
Long Head Bolt -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Replaces John Deere OEM number R42371< li> < UL> (Part No: 158372)
$54.00
Main Clutch Plate -
  • For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760< li>
  • Replaces John Deere OEM number R59690, R54111< li>
  • O.D.: 12.100"< li>
  • I.D.: 6.940"< li> < UL> (Part No: 127097)
$93.00
Mid Head Bolt -
  • For John Deere tractor models 5010, 5020, 6030, 8440, 8450, 8640, 8650< li>
  • Replaces John Deere OEM number R42368< li>
  • 5 8" X 5.120"< li> < UL> (Part No: 158370)
$21.50
Oil Filter Housing Cover -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230< li>
  • Replaces John Deere OEM number R42054< li> < UL> (Part No: 163920)
$82.00
Oil Pump Drive Gear -
  • For John Deere tractor models 3010, 3020 (s n 123000-earlier), 4010, 4020 (s n 215000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500 (engine s n 280000-earlier)< li>
  • Replaces John Deere OEM number R32428< li>
  • Replaces Casting number R26070, R26160, R32020, R33180, R34340, R40850, R40890, R40900, R409930, R46350, R46385, R46430< li>
  • 20 tooth< li> < UL> (Part No: 149888)
$47.30
Pin, Flywheel -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number R46046< li>
  • Quantity required: 3< li> < UL> (Part No: 168120)
$47.26
Pinion -
  • For John Deere tractor models 4000, 4020, 4230< li>
  • Replaces John Deere OEM number R65342< li> < UL> (Part No: 126971)
$149.00
Pinion -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE34414< li> < UL> (Part No: 150036)
$345.00
Pinion - First and Second Planet -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455< li>
  • Compatible with John Deere Construction & industrial models 670B, 672B< li>
  • Replaces John Deere OEM number R86557, R71404< li> < UL> (Part No: 172576)
$195.00
Pinion Gear -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number R119367< li> < UL> (Part No: 156743)
$440.00
Pinion - High Range -
  • For John Deere tractor model 4030< li>
  • Replaces John Deere OEM number R50366< li> < UL> (Part No: 161881)
$360.00
Pinion - Reverse Range -
  • For John Deere tractor models 4620, 4630, 7020, 7520< li>
  • Replaces John Deere OEM number R47119< li>
  • Teeth: 12 20< li> < UL> (Part No: 161880)
$360.00
Pinion with Bushing -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Compatible with John Deere Construction & industrial models 540E, 540G, 548E, 548G, 640E, 640G, 648E, 648G, 740E, 740G, 748E, 748G< li>
  • Replaces John Deere OEM number RE51473, R71573, AR10071< li>
  • Output Planetary Carrier Power Shift Transmission Pinion with Bushing< li> < UL> (Part No: 115242)
$119.00
Piston Pin Bushing -
  • For John Deere tractor models 5200 (engine s n 262108-earlier), 5300 (engine s n 291222-earlier)< li>
  • Compatible with John Deere Engine(s) 3029 (PowerTech Diesel)< li>
  • Replaces John Deere OEM number R116816< li>
  • 35mm Pin, Tapered< li>
  • Sold individually< li> < UL> (Part No: 161140)
$8.06
Piston Pin Bushing -
  • For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5720, 9940< li>
  • Compatible with John Deere Construction & industrial models 644D, 740A, 762A< li>
  • Replaces John Deere OEM number R60724< li> < UL> (Part No: 166125)
$6.76
Piston Pin Bushing -
  • For John Deere tractor models 5410, 5415, 5420, 5420N, 5425, 5425N, 5510, 5510N, 5515, 5520, 5520N, 5525, 5525N, 5615, 5620, 5715, 6603< li>
  • Compatible with John Deere Harvester(s) 7455, 7460, 9935< li>
  • Compatible with John Deere Construction & industrial models 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 324H, 410E, 410G, 450H, 450J, 485E, 486E, 488E, 550H, 550J, 650H, 650J, 700H< li>
  • Compatible with John Deere Hay Cutting(s) 4890, 4895, 4990< li>
  • Replaces John Deere OEM number R123960S< li> < UL> (Part No: 167147)
$13.76
Planetary Brake B1, B2, B3, B4 Plate -
  • For John Deere tractor models 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R46417, R43180< li>
  • O.D.: 12.712"< li>
  • I.D: 10.600"< li> < UL> (Part No: 127088)
$61.98
Planetary Brake B2 & B4 Plate -
  • For John Deere tractor models 4430, 4520 (With Powershift Transmission), 4555 (With Powershift Transmission), 4560 (With Powershift Transmission), 4620 (With Powershift Transmission), 4630 (With Powershift Transmission), 4640 (With Powershift Transmission), 4650 (With Powershift Transmission), 4755 (With Powershift Transmission), 4760 (With Powershift Transmission), 4840 (With Powershift Transmission), 4850 (With Powershift Transmission), 4955 (With Powershift Transmission), 4960 (With Powershift Transmission), 8850< li>
  • Replaces John Deere OEM number R46416, AE52287, R43181< li>
  • O.D.: 12.700"< li>
  • I.D: 10.590"< li> < UL> (Part No: 127087)
$41.00
Planetary Brake Clutch Pack Plate - 4th -
  • For John Deere tractor models 2510, 2520, 3020, 4000 (s n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R48235, AE52288, R33871, R33873< li>
  • O.D.: 11.600"< li>
  • I.D: 9.710"< li> < UL> (Part No: 127089)
$59.80
Planetary Brake Disc -
  • For John Deere tractor models 4520 (with Powershift Transmission), 4555 (with Powershift Transmission), 4560 (with Powershift Transmission), 4620 (with Powershift Transmission), 4630 (with Powershift Transmission), 4640 (with Powershift Transmission), 4650 (with Powershift Transmission), 4755 (with Powershift Transmission), 4760 (with Powershift Transmission), 4840 (with Powershift Transmission), 4850 (with Powershift Transmission), 4955 (with Powershift Transmission), 4960 (with Powershift Transmission), 7600 (with Powershift Transmission), 7700 (with Powershift Transmission), 7800 (with Powershift Transmission)< li>
  • Replaces John Deere OEM number RE234259, RE62897, AB4748R, AR48096, AR68345, AR94515, A1405R< li>
  • 1st & 3rd Planetary Brake< li>
  • Teeth: 104< li>
  • I.D.: 10.399"< li>
  • O.D.: 12.717"< li>
  • Spline Diameter Max: 10.565"< li>
  • Thickness: .13"< li> < UL> (Part No: 109836)
$36.00
Planetary Brake Disc -
  • For John Deere tractor models 4050, 4055, 4230 (s n 028121-later), 4250, 4255, 4430 (s n 044989-later), 4450, 4455 (All Powershift)< li>
  • Replaces John Deere OEM number AR69610, RE11099< li>
  • 95 Internal splines< li>
  • 11.625" O.D.< li>
  • 9.452" I.D.< li> < UL> (Part No: 117030)
$30.01
Planetary Brakes Clutch Pack Plate -
  • For John Deere tractor models 2510 (With Powershift 2 or 3 Plate Clutch), 2520 (With Powershift 2 or 3 Plate Clutch), 3020, 4000 (s n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R48236, R33872< li>
  • O.D.: 11.620"< li>
  • I.D.: 9.700"< li> < UL> (Part No: 117041)
$49.00
Planetary Clutch Drum -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE50019< li> < UL> (Part No: 119186)
$1175.00
Planetary Gear Kit -
  • For John Deere tractor models 6810 (Transmission s n 313218-later), 6910 (Transmission s n 313218-later), 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE178658, R166601, R166602, RE166599< li>
  • Includes: Planet pinion gears R166601 (3), Ring gear R166602 (1), Planet pinion gear RE166599 (1)< li> < UL> (Part No: 156325)
$5000.00
Planetary Pinion Carrier Housing -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE17691< li>
  • Housing only< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 108534)
$1641.70
Planet Brake Output Clutch Plate -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R77663< li> < UL> (Part No: 117044)
$16.00
Plate - Bottom Cast -
  • For John Deere tractor models 4000, 4020< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number R33552, R26657, R40732< li>
  • Size: 12"< li> < UL> (Part No: 114096)
$103.00
Plug -
  • For John Deere tractor models 320, 330, 420, 430, 1010, 5010, 5020 (s n 024999-earlier), 5020 (s n 025000-later), 6030, 6403, 7520, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) 9860 STS< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 7700, 7800< li>
  • Replaces John Deere OEM number M1206T< li> < UL> (Part No: 166876)
$7.46
Powershift Clutch Kit -
  • For John Deere tractor model 4020< li>
  • Replaces John Deere OEM number R830498< li>
  • Kit Contains: Contents for C1, C2, and Rear PTO Clutches: 11 (R27995) Friction Discs, 11 (R46391) Separator Plates, Manifold Gasket, Housing Gasket, 6 Piston Seals, 2 Seals, 6 Torque Bolts< li> < UL> (Part No: 162965)
$576.00
Powershift Clutch Kit -
  • For John Deere tractor models 4240, 4440< li>
  • Replaces John Deere OEM number R830504< li>
  • Kit Contains: Contents for C1, C2, and Rear PTO Clutches: 8 (R28023) Friction Discs, 3 (R94516) Friction Discs, 9 (R46418) Separator Plates, 2 (R56548) Separator Plates, 1 Manifold Gasket, 1 Housing Gasket, 6 Piston Seals, 2 Seals, 6 Torque Bolts< li> < UL> (Part No: 162966)
$860.00
Powershift Clutch Kit, C1, C2 and Rear PTO -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number RE23286, R46418, R56548< li>
  • Includes: 15 Friction Discs (RE23286), 12 Separator Plates (R46418), 3 Separator Plates A-R56548, 2 Pump Gaskets, 8 Seals for the following pistons: Oil Pump, C1, C2 and Rear PTO and 6 Torque Bolts (19H2111)< li>
  • For Friction Disc RE23286 use Item #: 117269< li> < UL> (Part No: 173377)
$756.00
Poweshift Clutch Kit -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number R830510< li>
  • Kit Contains: Contents for C1, C2, and Rear PTO Clutches: 11 (R28023) Friction Discs, 4 (R94517) Friction Discs, 12 (R46418) Separator Plates, 3 (R56548) Separator Plates, 1 Manifold Gasket, 1 Housing Gasket, 6 Piston Seals, 2 Seals, 6 Torque Bolts< li> < UL> (Part No: 162968)
$1056.30
PTO Clutch Assembly Disc -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 (All With Powershift Transmission), 8560 (With 12 Speed Syncro & 24 Speed Power Syncro), 8570 (With 12 Speed Syncro & 24 Speed Power Syncro), 8760 (With 12 Speed Syncro & 24 Speed Power Syncro), 8770 (With 12 Speed Syncro & 24 Speed Power Syncro), 8870 (With 12 Speed Syncro & 24 Speed Power Syncro), 8960 (With 12 Speed Syncro & 24 Speed Power Syncro), 8970 (With 12 Speed Syncro & 24 Speed Power Syncro)< li>
  • Replaces John Deere OEM number AR94519, RE239059< li>
  • ID: 5-7 8" (149mm)< li>
  • OD: 11" (279mm)< li>
  • 48 Teeth< li> < UL> (Part No: 117029)
$51.00
PTO Clutch & Brake Plate -
  • For John Deere tractor models 4050, 4240, 4250, 4430 (s n 044989-later), 4440, 4450, 4640, 4650, 4840, 4850< li>
  • Replaces John Deere OEM number R56548< li>
  • O.D.: 7.770"< li>
  • I.D.: 5.440"< li> < UL> (Part No: 127093)
$20.60
PTO Clutch & Brake Plate -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R70856< li>
  • O.D.: 5.075"< li>
  • I.D.: 3.897"< li> < UL> (Part No: 127109)
$21.00
PTO Clutch & Brake Plate -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4755, 4760, 4850, 4955, 4960 (All With Powershift)< li>
  • Replaces John Deere OEM number R71035< li>
  • O.D.: 5.192"< li>
  • I.D.: 3.938"< li> < UL> (Part No: 127110)
$9.00
PTO Clutch Disc -
  • For John Deere tractor models 2040 (s n 350000-earlier), 2155, 2240 (s n 350000-earlier), 2355, 2555, 2755, 2855, 2940, 2950, 2955, 3055, 3155, 3255< li>
  • Replaces John Deere OEM number AL55075, AL28723< li>
  • Splines: 19 Internal< li>
  • O.D.: 4.324"< li> < UL> (Part No: 127044)
$22.00
PTO Clutch Drum Rear, Remanufactured, AR95784 -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455< li>
  • Replaces John Deere OEM number AR95784< li>
  • Replaces John Deere Casting number R71230< li>
  • Casting No. R71230< li>
  • Includes pistons with new seals, and bushings< li> < UL> (Part No: 207023)
$860.01
Pulley, Crankshaft - Crankshaft Pulley. Used on John Deere 3010 gas, 3020 Gas & Diesel, 4000 Gas, 4020 Gas, and 4230 Gas. Replaces R47624, R34366 (Part No: R53031)		$113.39
Push Rod - Used on John Deere 2 Cylinder engines on M, MI, MT, 320, MC, 40, 330, this push rod is 11.125 inches overall length and 0.315 inches in diameter. This part replaces John Deere part number M30T (Part No: 184634)		$37.50
Push Rod -
  • For John Deere Construction & industrial models 270CLC, 270LC, 435, 444H, 444HLL, 555G, 670C< li>
  • Replaces John Deere OEM number R107731< li>
  • Length: 10.43"< li> < UL> (Part No: 186279)
$12.00
Rear Power Shaft Pinion Gear -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R71582< li>
  • Fourth Planet Pinion< li> < UL> (Part No: 113383)
$75.00
Rear Power Shaft Pinion Gear -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R71578< li>
  • Second Planet Sun Pinion< li> < UL> (Part No: 113385)
$65.00
Rear Power Shaft Pinon Gear -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number AR94153, R71579< li>
  • Third Planatery Sun Gear< li> < UL> (Part No: 113381)
$195.00
Rear Power Shaft Ring Gear -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R71753< li>
  • Second Planetary Ring Gear< li> < UL> (Part No: 113382)
$350.00
Remanufactured, Camshaft, R115335 -
  • For John Deere tractor models 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L< li>
  • Replaces John Deere Casting number R115335< li> < UL> (Part No: 210084)
$210.01
Remanufactured, Connecting Rod, R116851 -
  • For John Deere tractor models 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L< li>
  • Compatible with John Deere Engine(s) 4045T< li>
  • Replaces John Deere Casting number R116851< li> < UL> (Part No: 210083)
$100.00
Remanufactured, Connecting Rod, R501566, -
  • For John Deere tractor models 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T< li>
  • Compatible with John Deere Combine(s) 9860, 9860 STS< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 7700< li>
  • Replaces John Deere Casting number R501566, R519614< li>
  • Replaces John Deere OEM number RE502314, RE522978< li> < UL> (Part No: 210074)
$101.90
Ring Gear - For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: 103942)		$36.00
Ring Gear - For tractor models 6404, 6466, 6359, 6068 (6.8 Liter), 6076 (7.6 Liter), Combines: 6600, 6602, 6620, 6622, 7700, 7702, 8820, 9400, 9500, 9600. Starter Flywheel Ring Gear for DIESELS. (Part No: 103942)		$36.00
Ring Gear - For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. Starter Flywheel Ring Gear for DIESELS. (Part No: 103943)		$23.20
Ring Gear -
  • For John Deere tractor models 5103, 5203, 5303< li>
  • Replaces John Deere OEM number R138227< li>
  • Teeth: 6< li>
  • Spline: 24< li> < UL> (Part No: 165229)
$40.50
Ring Gear and Pinion Shaft Cover -
  • For John Deere tractor models 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number R113940< li>
  • Replaces Carraro manufacturer number 126280< li> < UL> (Part No: 154669)
$82.00
Ring Gear, Flywheel - This ring gear is for tractor models (B SN# 201000 and up), 50, 520, 530. 170 Teeth. Replaces original part number B2462R (Part No: 110998)		$119.99
Ring Gear, Flywheel - This ring gear is for tractor models L, LA, LI. Replaces AL4111T. 96 Teeth. (Part No: 126492)		$109.99
Ring Gear, Flywheel - This ring gear is for tractor models 70, 720, 730 all with gas engines. 210 Teeth. Replaces original part number F1227R (Part No: 110997)		$129.99
Ring Gear, Flywheel - This ring gear is for tractor models 620, 630. (Part No: 110996)$129.99
Ring Gear, Flywheel - This ring gear is for tractor models (A SN# 584000 and up), (AO, AR SN# 272000 and up), 60. (Part No: 110999)		$115.00
Ring Gear, Flywheel - This ring gear has 168 teeth and inside diameter just under 20 inches. For tractor models (A SN# 477000 to 583999), (AO, AR up to SN# 271999), (G, 70, 720, 730 diesel). (Part No: 110919)		$129.99
Ring Gear, Flywheel - For tractor models M, 40, 320, 330, 420, 430, 435, 440. Has 105 Teeth. (Part No: 126493)		$109.99
Ring Gear, Flywheel - This ring gear is used on Pony starting engine. For tractor models R, 80, 720, 730, 820, 830. (Part No: 114876)		$89.99
Ring Gear, Flywheel - For tractor models 3010, 3020, 4400, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8570. For Diesel Engines: 6404, 6466, 6359, 6068, (6.8 liter), 6076 (7.6 liter) in combines: 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9500, 9600. For diesel engines: 6404, 6466 in Forage Harvestors: 5200, 5400, 5440, 5720, 5730. Starter Flywheel Ring Gear. (Part No: 103942)		$36.00
Ring Gear, Flywheel - This Flywheel Ring Gear has 200 teeth. It fits John Deere - 620, 630; Replaces: A5641R (Part No: 110996)		$129.99
Ring Gear, Flywheel - This Flywheel Ring Gear has 165 Teeth, 16.678 inch outside diameter, and 15.540 inch inside diameter. It is used on 3010, 3020, 4000, 4010, 4020, 4030, 4230, 500 Indust Const, 500A Indust Const, 500C Indust Const, 510 Indust Const, 600 Indust Const, All with GAS or LP Engines. Replaces original part number R26054 (Part No: 121929)		$63.00
Rod Bearing Kit - .25MM -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9320, 9320T, 9400, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500< li>
  • Compatible with John Deere Construction & industrial models 450CLC, 744H< li>
  • Compatible with John Deere Engine(s) 6081 (HRW01, HRW05, HRW30, HZW013), 6105 (AF001, HF001, HRW01), 6125 (ADW01, ADW03, AFM01, AFM75, AT801, HF070, HRW01, , HRW02, HRW05, HRW07, HRW09, HRW13, HRW15, HRW16, HRW17, HRW18, HT001, HZ007, HZ008, HZ009, HZ013, SFM75)< li>
  • Replaces John Deere OEM number RE534627< li> < UL> (Part No: 157932)
$57.00
Rod Bearing Kit - .50MM -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9320, 9320T, 9400, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500< li>
  • Compatible with John Deere Construction & industrial models 450CLC, 744H< li>
  • Replaces John Deere OEM number RE534628< li> < UL> (Part No: 157934)
$80.00
Rod Bolt -
  • For John Deere tractor models 5010, 5020, 6030, 7520, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, 9100, 9200, 9300, 9300T, 9400, 9400T< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610 (Self Propelled), 6650, 6710 (Self Propelled), 6750, 6810 (Self Propelled), 6850, 6910 (Self Propelled), 6950< li>
  • Compatible with John Deere Engine(s) 6101AF010, 6101HF010, 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number R66453< li> < UL> (Part No: 157931)
$3.96
Rod Bolts -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) 9750 STS, 9860 STS< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 7700, 7800< li>
  • Replaces John Deere OEM number R501380< li> < UL> (Part No: 158842)
$22.00
Rod Bushing -
  • For John Deere tractor models 8640 (6 Cyl Diesel), 8650 (6 Cyl Diesel), 8760 (6 Cyl Diesel), 8770 (6 Cyl Diesel), 8870 (6 Cyl Diesel)< li>
  • Compatible with John Deere Engine(s) 6101 (6 Cyl, Diesel)< li>
  • Replaces John Deere OEM number R69045< li> < UL> (Part No: 157930)
$32.50
Rod Bushing -
  • For John Deere tractor models 4440, 4640, 4840, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6602, 6620, 6622, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5720, 9940< li>
  • Compatible with John Deere Construction & industrial models 644C, 646C, 740A, 743, 743A, 762A< li>
  • Compatible with John Deere Engine(s) 6466A (Diesel), 6466T (Diesel)< li>
  • Replaces John Deere OEM number R60724S< li>
  • Boreable< li> < UL> (Part No: 167490)
$8.60
Rod Bushing, Honable -
  • For John Deere tractor models 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Compatible with John Deere Construction & industrial models 644B, 646, 646B, 770, 770 (with ABCS), 770A, 770A (with ABCS), 772A, 772A (with ABCS)< li>
  • Compatible with John Deere Engine(s) 6531A, 6531T< li>
  • Replaces John Deere OEM number R76783< li>
  • 1.875" pin< li>
  • Honeable< li> < UL> (Part No: 167394)
$5.00
Second Planetary Ring Gear -
  • For John Deere tractor models 4050 (E), 4055, 4250 (E), 4255, 4450, 4455< li>
  • Replaces John Deere OEM number R71441< li> < UL> (Part No: 115250)
$1075.00
Separator Plate -
  • For John Deere tractor models 4630, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R51676< li>
  • Thickness: .09"< li> < UL> (Part No: 127091)
$22.90
Separator Plate -
  • For John Deere tractor models 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8320R, 8330, 8335R, 8360R, 8400, 8410, 8420, 8430, 8430T, 8520, 8530< li>
  • Replaces John Deere OEM number R108510< li>
  • I.D: 5.680" < li>
  • O.D: 9.187"< li>
  • Thickness: .118"< li>
  • 8 Tabs< li> < UL> (Part No: 162964)
$59.00
Seperator Plate -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8300, 8300T, 8310, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (2006-2009), 8430T, 8520, 8520T, 8530 (All With Powershift)< li>
  • Replaces John Deere OEM number R108481< li> < UL> (Part No: 127068)
$19.26
Seperator Reverse Brake Plate -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R86308< li>
  • O.D.: 14"< li>
  • I.D.: 10-5 8"< li> < UL> (Part No: 127113)
$47.38
Shift Collar -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7220, 7320< li>
  • Replaces John Deere OEM number L77034< li> < UL> (Part No: 161883)
$58.00
Shift Collar Carrier -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040 (s n 350000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2150, 2155, 2240 (s n 350000-later), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3040 (s n 430000-later), 3055, 3140 (s n 430000-later), 3150, 3155, 3255, 7200, 7400, 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7800, 7810 (s n 089999-earlier)< li>
  • Replaces John Deere OEM number L33060< li> < UL> (Part No: 161882)
$108.00
Shifter Shaft -
  • For John Deere tractor models 2140, 2350, 2355, 2550, 2555, 2750, 2755, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255< li>
  • Replaces John Deere OEM number AL55218< li> < UL> (Part No: 163425)
$400.00
Shim -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500B, 500C, 510, 600, 690, 690A< li>
  • Replaces John Deere OEM number AR39521< li> < UL> (Part No: 156484)
$16.76
Short Head Bolt -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 760, 760A< li>
  • Replaces John Deere OEM number R42372< li> < UL> (Part No: 158371)
$22.30
Spacer -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 6610, 6810, 6910, 8560, 8570, 8760, 8770, 8960, 8970< li>
  • Compatible with John Deere Combine(s) 9500, 9500 SH, 9600< li>
  • Replaces John Deere OEM number R84959< li>
  • John Deere 7.6L< li> < UL> (Part No: 158975)
$7.36
Spacer, Planetary Output -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R71757< li> < UL> (Part No: 165993)
$6.00
Steel Clutch Disc -
  • For John Deere Construction & industrial models 550, 550A, 550B, 555, 555A, 555B< li>
  • Replaces John Deere OEM number T44804< li>
  • O.D.: 6" (152mm)< li>
  • I.D. 3-1 4" (82mm)< li>
  • Teeth: 40< li> < UL> (Part No: 127155)
$41.00
Steel Disc -
  • For John Deere tractor models 4055 (Planetary Clutch), 4255 (Planetary Clutch), 4430 (Planetary Clutch), 4440 (Planetary Clutch), 4450 (Planetary Clutch), 4455 (Planetary Clutch), 8560 (PTO Clutch), 8570 (PTO Clutch), 8760 (PTO Clutch), 8770 (PTO Clutch), 8870 (PTO Clutch), 8960 (PTO Clutch), 8970 (PTO Clutch)< li>
  • Replaces John Deere OEM number R77671< li>
  • I.D.: 4.76"< li>
  • O.D.: 7.74"< li>
  • Teeth: 6< li> < UL> (Part No: 117045)
$10.60
Steering Clutch Disc -
  • For John Deere Construction & industrial model 2010< li>
  • Replaces John Deere OEM number T14339< li>
  • I.D.: 7"< li>
  • O.D.: 10-7 8"< li>
  • Thickness: .093"< li>
  • Tabs: 6< li>
  • Tab Width: .618"< li> < UL> (Part No: 127133)
$31.90
Steering Clutch Disc -
  • For John Deere Construction & industrial models 350, 350B, 350C (s n 752882-earlier), 350D, 355D, 400G< li>
  • Replaces John Deere OEM number T21315< li> < UL> (Part No: 127159)
$17.76
Steering Clutch Disc -
  • For John Deere Construction & industrial models 340D, 350, 350B, 350C, 350D, 355, 355D, 440D, 448D, 540D, 548, 640D, 648D< li>
  • Replaces John Deere OEM number T44128, AT117553< li>
  • 8.958" O.D.< li>
  • 30 Tooth< li>
  • Fiber< li> < UL> (Part No: 151113)
$30.80
Steering Clutch Disc -
  • For John Deere Construction & industrial model 2010< li>
  • Replaces John Deere OEM number T14340, T211829< li>
  • 9.974" O.D.< li>
  • 33 Internal teeth< li>
  • Fiber< li> < UL> (Part No: 151808)
$42.40
Steering Wheel Starter Crank - Fits John Deere - A (sn 584000 and up), B (sn 201000 and up), 50, 60, 70 (Gas), 520 (up to sn 5208099), 620 (up to sn 6213099); Replaces: AB3580R (Part No: 126729)		$58.00
Sun Gear -
  • For John Deere tractor models 7600, 7610 (sn:089999-earlier), 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number R127271< li> < UL> (Part No: 156022)
$130.00
Sun Gear -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 7200, 7210, 7220, 7320, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 090000-later), 7720, 7800, 7810 (s n 090000-later), 7815 (Brazil), 7820, 7920< li>
  • Replaces John Deere OEM number RE41265< li>
  • Sun Gears< li> < UL> (Part No: 156627)
$650.00
Synchronizer Brake Drum -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455< li>
  • Replaces John Deere OEM number R63073< li> < UL> (Part No: 165724)
$229.00
Synchronizer Disc Kit -
  • For John Deere tractor models 4555, 4560, 4640, 4650, 4755, 4760, 8430 (1974-'81), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number AR87999, RE234257< li>
  • Contains: (10) Discs, (10) plates< li>
  • Does not include retainers< li> < UL> (Part No: 127030)
$278.70
Tappet - For tractor models 2510, 5210, 5310, 5410, 5510, 820, 920, 1020, 1120, 1520, 2020, 2520, 3120, 5220, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 4030, 2040, 2140, 2240, 2440, 3040, 3140, 3050. (Part No: 123888)		$8.06
Tensioner -
  • For John Deere tractor models 6100 (s n 159439-later), 6200 (s n 159439-later), 6300 (s n 159439-later), 6400 (s n 159439-later), 6505 (s n 159439-later), 6600 (s n 159439-later), 6800 (s n 159439-later), 6900 (s n 159439-later)< li>
  • Replaces John Deere OEM number AL116368, AL112293, AL113385< li> < UL> (Part No: 167532)
$57.00
Tensioner -
  • For John Deere tractor models 5065M, 5075M, 5085M< li>
  • Replaces John Deere OEM number RE536097< li> < UL> (Part No: 167760)
$79.00
Tensioner -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120T, 8200, 8200T, 8210, 8210T, 8220T, 8300, 8300T, 8310, 8310T, 8320T, 8400, 8400T, 8410, 8410T, 8420T, 8520T< li>
  • Replaces John Deere OEM number RE69083< li> < UL> (Part No: 167761)
$195.00
Tensioner Pulley -
  • For John Deere tractor models 5070M, 5080M, 5080R, 5090M, 5090R, 5100M, 5100R, 5620, 5720, 5820, 6010, 6020, 6110, 6120, 6205, 6210, 6220, 6310, 6320, 6410, 6420, 6420S, 6505, 6510, 6610, 6810, 6910, 6910S< li>
  • Replaces John Deere OEM number AL157596< li> < UL> (Part No: 162009)
$50.00
Tensioner Pulley -
  • For John Deere tractor models SE6020, SE6120, SE6220, SE6320, SE6420, SE6520, SE6620, SE6920, 4630, 5620, 5720, 5820, 6020, 6120, 6120L, 6130, 6215, 6220, 6220L, 6225, 6230, 6320, 6320L, 6325, 6330, 6415, 6420, 6420S, 6425, 6430, 6515, 6520, 6525, 6530, 6534, 6615, 6620, 6715, 6820, 6830, 6920, 6920S, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number 531091610< li> < UL> (Part No: 167788)
$63.00
Tensioner Pulley -
  • For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900< li>
  • Replaces John Deere OEM number 534063210< li> < UL> (Part No: 167789)
$63.00
Tensioner Pulley -
  • For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 6100, 6200, 6300, 6400, 6506, 6600, 6800, 6900< li>
  • Replaces John Deere OEM number 534063310< li> < UL> (Part No: 167790)
$63.00
Tensioner Pulley -
  • For John Deere tractor models 6010, 6110, 6210, 6310, 6410, 6510, 6610, 6810, 6910, 6910S< li>
  • Replaces John Deere OEM number 534063410< li> < UL> (Part No: 167791)
$53.00
Tensioner Spring -
  • For John Deere tractor models 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L< li>
  • Replaces John Deere OEM number AL110285, AL78966, AL81301< li> < UL> (Part No: 167573)
$202.00
Three Point Push Rod -
  • For John Deere tractor models 50, 60, 70< li>
  • Replaces John Deere OEM number 32570A< li> < UL> (Part No: 126746)
$71.00
Thrust Washer - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 up to SN# 335845 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6cyl eng.), (4055 SN# 500000 and up 6.076H, 6.076T or 6.076A 6cyl engines), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6cyl eng.), (4255 SN# 500000 and up 6.076T, 6.076A, 6.076H 6cyl eng.), (4320 6.404T A 6cyl eng.), (4430 SN# 335845 and up 6.404T A 6cyl eng.), (4440 6.466T SN# 253372 and less & 6.466A SN# 233592 and less 6 cyl eng.), (4450 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6cyl eng.) (Part No: 168002)		$14.50
Thrust Washer - For tractor models (4450 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6cyl eng.), (4455 SN# 500000 and up 6.076H, 6.076T, 6.076A 6cyl eng.), (4520 SN# 335845 and below 6.404T A 6cyl eng.), (4555 SN# 500000 and up 6.076H, 6.076T, 6.076A 6cyl eng.), (4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6cyl eng.), (4620 SN# 335845 and up 6.404T A 6 cyl eng.), (4630 SN# 335845 and up 6.404T A 6 cyl eng.), (4640 6.466T SN# 253372 and below & 6.466A SN# 233592 and below and above SN# 317859 6 cyl eng.), (4650 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6 cyl eng.), (4755 6.076H, 6.076A, 6.076T 6 cyl eng.), (4760 6.076A, 6.076H, 6.076T 6 cyl eng.), (4840 6.466T SN# 253372 and below & 6.466A SN# 317858 and below 6 cyl eng.), (4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955 SN# 499999 and below 6.076T, 6.076A, 6.076H 6 cyl eng.), (4960 SN# 499999 and below 6.076H, 6.076A, 6.076T 6 cyl eng.) (Part No: 168002)		$14.50
Thrust Washer - For tractor models (500A, 500B, 500C, 510 SN# 280000 and up 4.270 4 cyl eng.), (5440 SN# 6.404T A 6 cyl eng.), (5460 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (5720 6.466T, 6.466A 6 cyl eng.), (5730 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (600, 644, 644A, SN# 335845 and below with 6.404D, 6.404T A 6 cyl eng.), (644C with 6.466T SN# 253373 and up & 6.466A 233593 and up 6 cyl eng.), (644D with 6.466D 6 cyl eng.), (644E, 644ER with 6.076H, 6.076T, 6.076A 6 cyl eng.), (646 SN# 335845 and below, 6.404T A 6 cyl eng.), (646A with 6.466D 6 cyl eng.), (646B SN# 335845 and below 6.404T A 6 cyl eng. (Part No: 168002)		$14.50
Thrust Washer - For tractor models (6600 with 6.404D, 6.404T A 6 cyl eng.), 6602 with 6.466T & 6.466A SN# 233592 and below and 317859 and up 6 cyl eng.), (6620 with 6.466T & (6.466A SN# 233592 and below and 317859 and up.)& 6.466D SN# 335846 and up 6 cyl eng.), (6622 with 6.466T & (6.466A SN# 233592 and below and 317859 and up.), (690, 690A SN# 335845 and below 6.404T A 6 cyl eng.), (690B SN# 335845 and up 6.404T A 6 cyl eng.), (690C with 6.466T SN# 253373 and up & 6.466A 233593 and up 6 cyl eng.), (693C, 740 with 6.404T A SN# 335845 and up 6 cyl eng.), (740A with 6.466D 6 cyl eng), (740E, 740G with 6.076H, 6.076T, 6.076A 6 cyl eng.), (748E, 748G with 6.076H, 6.076T, 6.076A 6 cyl eng.), (762A with 6.466D, (6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.) (Part No: 168002)		$14.50
Thrust Washer - For tractor models (762B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (7700 with 6.404D, 6.404T A 6 cyl eng.), (770A, 770B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (770B, 770BH with 6.076H SN# 500000 and up, 6.076T, 6.076A 6 cyl eng.), (7720 with 6.466T & (6.466A SN# 253373 and up), 6 cyl eng.), (772B, 772BH, 7800 with 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (790D with 6.466T SN# 253373 and up & 4.66A SN# 233593 and up 6 cyl eng.), (792D, 792LC, 8100, 8300 with 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.) (Part No: 168002)		$14.50
Thrust Washer - For tractor models (8430 with 6.466T SN# 253372 and below & 6.466A SN# 317858 and below 6 cyl eng.), (8440, 8450 with 6.466T SN# 253372 and below & 6.466A 317858 and below 6 cyl eng.), (850B with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up 6 cyl eng.), (850C with 6.076H SN# 500000 and up 6.076A, 6.076T, 6 cyl eng.), (8820, 892D with 6.466T & (6.466A SN# 317858 and below) 6 cyl eng.), (892E, 892LC, 9500, 9600 with 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (9940, 9950 with 6.466T & (6.466A SN# 317858 and below 6 cyl eng.), (9960, 9965 with 6.076H SN# 500000 and up, 6.076T, 6.076A 6 cyl eng.), JD740A SN# 233593-317858 6.466A 6 cyl eng. (Part No: 168002)		$14.50
Thrust Washer Kit - .007 O/S -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9320, 9320T, 9330, 9400, 9410R (s n 000101-014999), 9420, 9420R (s n 015000-later), 9420RX, 9420T, 9430, 9430T, 9460R (s n 000101-014999), 9470RX, 9520, 9520T, 9530, 9530T, 9570R (s n 015000-later), 9570RX, 9620, 9620T, 9630, 9630T< li>
  • Compatible with John Deere Combine(s) 9860 STS< li>
  • Compatible with John Deere Harvester(s) 7280, 7350, 7380, 7450, 7480, 7550, 7580, 7750, 7760 (s n N07760X039000-earlier), 7780, 8300 (s n 516000-516999), 8400 (s n 516000-516999), 8500 (s n 513822-515999), 8500 (s n 517000-517999), 8500 (s n 619000-619999), 8600, 8600 (s n 516000-516999), 8600 (s n 513822-515999), 8600 (s n 619000-619999)< li>
  • Compatible with John Deere Construction & industrial models 450CLC, 744H, 744J, 824J, 824K, 844K (s n 642007-earlier)< li>
  • Replaces John Deere OEM number RE531770< li> < UL> (Part No: 157942)
$82.00
Thrust Washer Set - Standard -
  • For John Deere tractor models 5010, 5020 (s n 024999-earlier), 5020 (s n 025000-later), 6030, 7520, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910< li>
  • Replaces John Deere OEM number AR89622< li> < UL> (Part No: 158399)
$11.00
Timing Gear Cover -
  • For John Deere tractor models 830, 930, 1020, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3030, 3130, 4030< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Compatible with John Deere Harvester(s) 484, 5420, 5440, 7440, 9900, 9910, 9920< li>
  • Compatible with John Deere Construction & industrial models 70, 210, 210C, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 340, 340D, 350, 350B, 350C, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455, 455D, 480, 480A, 480B, 480C, 482, 482C, 490, 510, 510B, 510C, 540, 540A, 540B, 540D, 544, 544A, 544B, 544D, 548, 548D, 550, 550A, 555, 555A, 555G, 570, 570A, 610, 610B, 610C, 640, 640D, 643, 648, 648D, 650, 650G, 655, 655B, 670, 670A, 670B, 672, 672B, 690, 690D, 690DR, 693, 693D, 710, 710B, 710C, 750, 750B, 755, 755A, 755B< li>
  • Compatible with John Deere Hay Cutting(s) 2320, 2360, 2420< li>
  • Replaces John Deere OEM number AT19509, AR58196< li>
  • Oblong Inspection Hole Open< li> < UL> (Part No: 123600)
$280.00
Topshaft Assembly, Remanufactured, R33384 -
  • For John Deere tractor models 4000, 4020< li>
  • Replaces John Deere OEM number R33384< li>
  • Uses 3 syncro drums< li>
  • Assembly includes: top shaft, pinions, synchronizer< li> < UL> (Part No: 203977)
$1825.01
Topshaft Assembly, Remanufactured, R33512 -
  • For John Deere tractor model 3020< li>
  • Replaces John Deere OEM number R33512< li>
  • Uses 3 syncro drums< li>
  • Assembly includes: top shaft, pinions, synchronizer< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 207015)
$1550.01
Topshaft Assembly (Synchro Range), Remanufactured -
  • For John Deere tractor models 4040, 4240, 4430< li>
  • For Syncro Range Transmission< li>
  • Used 14 Tooth Low Range Pinion Gear R59613< li> < UL> (Part No: 204502)
$1300.01
Topshaft Clutch Disc Kit -
  • For John Deere tractor models 2010, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230 (s n 037595-earlier), 4320, 4430 (s n 066737-earlier)< li>
  • Replaces John Deere OEM number RE37119< li>
  • All with Syncrorange Transmission< li>
  • Kit contains of 2 plates and 3 discs. 7520 calls for 3 plates and 4 discs (order 2 kits).< li> < UL> (Part No: 117082)
$40.00
Torsional Dampener -
  • For John Deere tractor models 9120, 9200 (s n 001548-earlier), 9220, 9300 (s n 001593-earlier), 9320, 9320T, 9330, 9400, 9410R (s n 014999-earlier), 9420, 9420T, 9430, 9430T, 9460R, 9510R, 9520, 9520T, 9530, 9530T, 9560RT, 9620, 9620T, 9630, 9630T< li>
  • Compatible with John Deere Harvester(s) 7280, 7380, 7480, 7580, 7780< li>
  • Replaces John Deere OEM number RE220150, RE46855, RE222829< li>
  • Engine Coupling, PST< li> < UL> (Part No: 168090)
$820.00
Torsional Dampener -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number RE213694, RE45382< li>
  • Engine Coupling< li> < UL> (Part No: 168091)
$550.00
Torsional Dampner Pulley -
  • For John Deere tractor models 8100 (s n 016632-earlier), 8100T, 8120, 8120T, 8200 (s n 016632-earlier), 8220, 8220T, 8300 (s n 016632-earlier), 8300T, 8320, 8320T, 8400, 8410, 8410T, 8420, 8420T, 9100 (s n 038791-earlier)< li>
  • Compatible with John Deere Combine(s) CTSII (s n 039521-earlier), 9510 (s n 039521-earlier), 9510 SH (s n 039521-earlier), 9610 (s n 039521-earlier)< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 9976 (s n 38791-earlier)< li>
  • Compatible with John Deere Construction & industrial models 644G, 740G, 748GII (s n 38791-earlier), 762B (s n 38791-earlier), 770C, 770CH, 770D, 772CH, 772D, 850C, 870D, 872D< li>
  • Compatible with John Deere Engine(s) 6068, 6081< li>
  • Replaces John Deere OEM number RE57603< li> < UL> (Part No: 163611)
$199.00
Transaxle Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R256354< li>
  • Teeth: 29< li> < UL> (Part No: 165238)
$420.00
Transaxle Gear -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5105ML, 5115M< li>
  • Replaces John Deere OEM number R275246< li>
  • Teeth: 26< li> < UL> (Part No: 165239)
$390.00
Transmission Disc -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number RE35517< li>
  • O.D.: 9.230"< li>
  • I.D.: 7.380"< li>
  • Teeth: 110 External< li> < UL> (Part No: 118143)
$29.20
Transmission Disc -
  • For John Deere tractor models 6010, 6100 (s n 128111-earlier), 6110, 6200 (s n 128111-earlier), 6210, 6300 (s n 128111-earlier), 6310, 6400 (s n 128111-earlier), 6500 (s n 128111-earlier), 6506 (s n 128111-earlier), 6510, 6600 (s n 128111-earlier), 6610, 6800 (s n 128097-earlier), 6810, 6900 (s n 128097-earlier), 6910, 7200, 7210 (s n 128054-earlier), 7400, 7410 (s n 128054-earlier), 7600, 7610 (s n 128054-earlier), 7700, 7800, 7810 (s n 128054-earlier)< li>
  • Replaces John Deere OEM number RE34784< li>
  • O.D.: 11-1 2"< li>
  • I.D.: 8-3 4"< li>
  • Teeth: 87< li> < UL> (Part No: 122434)
$36.00
Transmission Disc -
  • For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6210, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, SE6920, 1654, 1854, 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820, 6010, 6020, 6090MC, 6090RC, 6095MC, 6095RC, 6100, 6100MC, 6100RC, 6105M, 6105MC, 6105R, 6105RC, 6110, 6110J, 6110L, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115R, 6115RC, 6120, 6120L, 6120M, 6120R, 6125J, 6125M, 6125R, 6130, 6130J, 6130M, 6130R, 6135M, 6135R, 6140J, 6140M, 6140R, 6145J, 6145M, 6145R, 6150M, 6150R, 6150RH, 6155J, 6155M, 6155R, 6155RH, 6165J, 6170M, 6170R, 6175M, 6175R, 6180J, 6190R, 6195M, 6195R, 6200, 6200L, 6210, 6210L, 6210R, 6215, 6215R, 6220, 6220L, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6330, 6400, 6400L, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6430, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6520, 6520L, 6530, 6534, 6600, 6610, 6615, 6620, 6630, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920, 6920S, 6930, 7130, 7185J, 7200, 7200R, 7205J, 7210, 7210R, 7215R, 7220, 7225J, 7230, 7230R, 7320, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7810 (All With Powerquad Transmission), 7820, 7830, 7930< li>
  • Replaces John Deere OEM number RE34786, RE273492< li>
  • O.D.: 11.225"< li>
  • I.D.: 4.620"< li>
  • Thickness: .130"< li>
  • Teeth: 54< li> < UL> (Part No: 122435)
$45.20
Transmission Disc -
  • For John Deere tractor models 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6405, 6420, 6500, 6505, 6506, 6510, 6600, 6605, 6610< li>
  • Replaces John Deere OEM number L78682< li>
  • O.D.: 5-1 4"< li>
  • I.D.: 2-1 4"< li>
  • Teeth: 20< li> < UL> (Part No: 127063)
$26.00
Transmission Disc -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number RE62896, RE35515, RE203900< li>
  • O.D.: 7"< li>
  • I.D.: 2.570"< li>
  • Teeth: 39< li> < UL> (Part No: 127151)
$31.00
Transmission Disc -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number RE65324< li>
  • O.D.: 7"< li>
  • I.D.: 2.545"< li>
  • Teeth: 39< li> < UL> (Part No: 127152)
$44.10
Transmission Disc -
  • For John Deere tractor models 2040S, 2140, 2550, 2750, 2940, 2950, 3040, 3140< li>
  • Replaces John Deere OEM number AL120012, AL33126, R33126, R38407< li>
  • Diameter: 12.598"< li>
  • Spline Count: 10< li>
  • Spline Diameter: 1.250"< li>
  • Center: Spring Loaded< li>
  • Type: Organic< li> < UL> (Part No: 162611)
$310.00
Transmission Disc -
  • For John Deere tractor models 5083E (Use Power Reverser Transmission), 5093E (Use Power Reverser Transmission), 5101E (Use Power Reverser Transmission), 5200 (Use Hydraulic Reverser Transmission), 5210 (Use Power Reverser Transmission), 5220 (Use Power Reverser Transmission), 5225 (Use Power Reverser Transmission), 5300 (Use Hydraulic Reverser Transmission), 5310 (Use Power Reverser Transmission), 5320 (Use Power Reverser Transmission), 5325 (Use Power Reverser Transmission), 5325N (Use Power Reverser Transmission), 5400 (Use Hydraulic Reverser Transmission), 5410 (Use Power Reverser Transmission), 5420 (Use Power Reverser Transmission), 5425 (Use Power Reverser Transmission), 5425N (Use Power Reverser Transmission), 5500 (Use Hydraulic Reverser Transmission), 5510 (Use Power Reverser Transmission), 5520 (Use Power Reverser Transmission), 5525 (Use Power Reverser Transmission), 5525N (Use Power Reverser Transmission), 5603 (Use Power Reverser Transmission), 5625 (Use Power Reverser Transmission), 5725 (Use Power Reverser Transmission)< li>
  • Replaces John Deere OEM number RE63332< li> < UL> (Part No: 162616)
$39.00
Transmission Gear -
  • For John Deere tractor models 7610, 7710, 7810< li>
  • Replaces John Deere OEM number R153837< li>
  • Clutch Assembly - Power Shift Transmission< li> < UL> (Part No: 158065)
$350.00
Transmission Gear -
  • For John Deere tractor models 5103, 5200, 5203, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5415, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5605, 5705< li>
  • Replaces John Deere OEM number L113164< li>
  • Teeth: 33< li> < UL> (Part No: 165240)
$295.00
Transmission Input Shaft -
  • For John Deere tractor models 4000, 4010, 4020, 4320 (All Syncro Range)< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number R34201< li>
  • Length: 21.310"< li>
  • Tooth Splines: 19< li> < UL> (Part No: 114097)
$251.00
Transmission Plate -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R95211< li>
  • O.D.: 9-1 4"< li>
  • I.D.: 4-1 2"< li> < UL> (Part No: 127114)
$15.50
Transmission Plate -
  • For John Deere tractor models 6810, 6910, 7600, 7610, 7700, 7710, 7800, 7810 (All With Powershift Transmission)< li>
  • Replaces John Deere OEM number R96791< li>
  • O.D.: 12"< li>
  • I.D.: 8-1 4"< li> < UL> (Part No: 127117)
$33.00
Transmission Plate -
  • For John Deere tractor models 5083E (Use Power Reverser Transmission), 5093E (Use Power Reverser Transmission), 5101E (Use Power Reverser Transmission), 5200 (Use Hydraulic Reverser Transmission), 5210 (Use Power Reverser Transmission), 5220 (Use Power Reverser Transmission), 5225 (Use Power Reverser Transmission), 5300 (Use Hydraulic Reverser Transmission), 5310 (Use Power Reverser Transmission), 5320 (Use Power Reverser Transmission), 5325 (Use Power Reverser Transmission), 5325N (Use Power Reverser Transmission), 5400 (Use Hydraulic Reverser Transmission), 5410 (Use Power Reverser Transmission), 5420 (Use Power Reverser Transmission), 5425 (Use Power Reverser Transmission), 5425N (Use Power Reverser Transmission), 5500 (Use Hydraulic Reverser Transmission), 5510 (Use Power Reverser Transmission), 5520 (Use Power Reverser Transmission), 5525 (Use Power Reverser Transmission), 5525N (Use Power Reverser Transmission), 5603 (Use Power Reverser Transmission), 5625 (Use Power Reverser Transmission), 5725 (Use Power Reverser Transmission)< li>
  • Replaces John Deere OEM number R127466< li> < UL> (Part No: 162617)
$34.50
Transmission Rear Clutch Pack Plate -
  • For John Deere tractor models 4240, 4430 (s n 044989-later), 4440, 4520, 4620, 4630 (s n 016987-earlier), 4640, 4840 (All With Powershift Transmissions)< li>
  • Replaces John Deere OEM number R46418, R43209, R59955, R81922< li>
  • ID: 5-7 16" (138mm)< li>
  • OD: 8-1 2" (217mm)< li>
  • 6 Tabs< li> < UL> (Part No: 117040)
$13.90
Transmission Rear Clutch Pack Plate -
  • For John Deere tractor models 1020, 1520, 2020, 2030 (All With Reverser Transmission), 2155 (With Directional Reverser Transmission), 2240 (s n 350000-later), 2355 (With Directional Reverser Transmission), 2510 (With Powershift Hi Range), 2520 (Powershift With 2 or 3 Plate Clutch), 2555 (With Reverser Transmission), 2630 (With Reverser Transmission), 3020 (Powershift), 4000 (s n 201000-later), 4020 (s n 201000-later), 4230 (s n 028121-later)< li>
  • Replaces John Deere OEM number R57345, R39325, R32313, R49129< li>
  • O.D.: 6.93" (176mm)< li>
  • I.D: 4.75" (120mm)< li>
  • 6 Tabs< li> < UL> (Part No: 127084)
$17.26
Transmission Rear Clutch Pack Plate -
  • For John Deere tractor model 4040< li>
  • Replaces John Deere OEM number R56547< li>
  • ID: 4-3 4" (121mm)< li>
  • OD: 7-11 16" (195mm)< li>
  • 6 Tabs< li> < UL> (Part No: 127092)
$25.00
Transmission Separator Disc -
  • For John Deere Construction & industrial model 480< li>
  • Replaces John Deere OEM number T100681< li>
  • I.D.: 6-1 8"< li>
  • O.D. 8-7 16"< li>
  • Teeth: 3< li> < UL> (Part No: 127156)
$30.36
Transmission Top Shaft Assembly, Remanufactured, R26256 -
  • For John Deere tractor model 3010< li>
  • Replaces John Deere OEM number R26256< li>
  • Includes Pinion Gear R26261< li>
  • Assembly Includes Top Shaft, Pinion Gear & Synchronizer< li> < UL> (Part No: 209987)
$1650.01
Turbocharger - For model 2355 if SN# is below 916313 then drain tube (RE47253 NOT available through us) may be required. (Part No: 113643)		$1125.00
Valve, Exhaust - Valve, exhaust, 2 used per engine. For gas engine, 2 cylinder, 100 CID 4 inch bore. Head Diameter 1.555 inch, Length 5.732 inches, 45 degree. Models: M, 40, 320, 330. Replaces M101T, 211-1783, AM676T (Part No: 128579)		$19.99
Valve, Exhaust - 4 used in 254 CID 4 cylinder diesel engine (block numbers R26160, R40910, R46350, R46430 only); 6 used in 381 CID 6 cylinder diesel engine. For tractor models 3010, 4010. (Part No: 167265)$11.10
Valve, Exhaust - 4 used in 201 CID 4 cylinder gas engine (block number R26150) and 227 CID 4 cylinder gas engine (to serial number 122999); 6 used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870, to serial number 200999). For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Part No: 108876)$17.20
Valve, Exhaust - For tractor models 3020, 4000, 4020, 4040, 4230, 4320, 4520, 4620, 7020. (Part No: 156103)$15.26
Valve, Exhaust - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Part No: 161171)$13.00
Valve, Exhaust - For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-R50357)$30.45
Valve, Exhaust - Valve, exhaust, standard. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277549 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030 (Part No: 128630)$10.06
Valve, Exhaust - Valve, exhaust, 4 used per engine. For 4 cylinder, 145 CID 3-5 8 bore model: 2010 gas. Price shown is for each, sold only in multiples of 4 items. For 1010, 2010. (Part No: 128584)$23.60
Valve, Exhaust - Standard, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Part No: 169306)$26.76
Valve, Exhaust - For B. Exhaust Valve (each) For serial #96000 and up. (Part No: 108981)$26.99
Valve, Exhaust - For tractor models A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. (Part No: 128581)		$32.99
Valve, Exhaust - For model 850. (Part No: CH10056)$17.16
Valve, Exhaust - For model 1050. (Part No: CH15725)$31.31
Valve, Exhaust - For model 950. (Part No: CH10095)$23.88
Valve, Exhaust - For tractor models 420, 430, 440. (Part No: 128628)$15.90
Valve, Exhaust - For tractor models (G from SN# 13000 and up), (70 with all fuel head). (Part No: 179503)		$70.00
Valve, Exhaust - For model 70 with gas or LP head. (Part No: R-F1220R)$43.59
Valve, Exhaust - Used in Pony starting motor. For model R. (Part No: R-R786R)		$27.83
Valve, Exhaust - For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). Replaces A4739R, AA1811R, AA4959R. (Part No: 179494)$29.76
Valve, Exhaust - For tractor models (B up to SN# 95999), BO, BR. Replaces B2878R. (Part No: 179501)		$31.69
Valve, Exhaust - For tractor models 520, 530. Replaces AB5203R. (Part No: B3750R)$25.60
Valve, Exhaust - For tractor models (70, 720, 730 all diesel), R. Replaces AF3192R, AR584R. (Part No: 185112)$53.69
Valve, Exhaust - For tractor models 80, (820, 830 both 2 cylinders). Replaces AR1383R. (Part No: R1337R)$50.33
Valve, Exhaust - For tractor models 620, 630. Replaces A5628R. (Part No: R20246R)$39.38
Valve, Exhaust - Exhaust valve for 2 cylinder model H. 1.555" head diameter, 5.732" length, 45 degree. (Part No: 128579)		$19.99
Valve, Exhaust -
  • For John Deere tractor models 6030, 7520, 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830< li>
  • Compatible with John Deere Engine(s) 6619AF (s n 010696-earlier), 6619TF-01 (s n 010696-earlier)< li>
  • Replaces John Deere OEM number R90601< li>
  • 1.865" head diameter, 6.620" length, 45 degree< li> < UL> (Part No: 166957)
$11.56
Valve Guide - Guide, intake & exhaust valve, 4 used per engine. For gas engine, 2 cylinder, 190 CID 4-11 16 bore. For 50, (B SN# 96000 and up). Price shown is for each, sold only in multiples of 4 items. (Part No: 108979)$14.00
Valve Guide - Guide, intake & exhaust valve, 4 used per engine. These Guides measure 2 3 4 inches. For 2 cylinders, 113 CID 4-1 4 bore models: 420, 430 gas, 440 (flathead piston) gas. For 420, 430, 440. Priced per guide, minimum order quantity is 4. Replaces M3036T (Part No: TP-M3036T)		$12.05
Valve Guide - Intake and exhaust valve guide. For gas engine, 2 cylinder, 100 CID 4 bore. Models: M, 40, 320, 330. Price shown is for each, sold only in multiples of 4 items. (Part No: 128583)		$7.20
Valve Guide - Guide, intake & exhaust valve, 8 used per engine. For 4 cylinder, 145 CID 3-5 8 bore model: 2010 gas. For tractor models 1010, 2010. Price shown is for each, sold only in multiples of 8 items. (Part No: 179517)$8.30
Valve Guide - For A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. Valve Guide. (Part No: 185355)$10.90
Valve Guide - Intake and exhaust. For tractor models G EARLY SERIAL NUMBERS BEFORE 13000 MAY NEED TO BE MACHINED SLIGHTLY SHORTER TO MATCH LENGTH COMING OUT OF YOUR TRACTOR, (70 with all fuel head). (Part No: 184546)		$21.00
Valve Guide - For model D up to SN# 109943. (Part No: 184691)$25.00
Valve Guide - For tractor models (A up to SN# 487999), (AO, AR SN# up to 259999. Replaces A35R (Part No: 188953)		$22.96
Valve Guide - For tractor models 620, 630. Replaces AA6769R. (Part No: 190148)		$16.14
Valve Guide - For tractor models (B up to SN# 95999, BO, BR. Replaces AB4058R (Part No: 179496)$11.26
Valve Guide - For tractor models 520, 530. Replaces AB5272R. (Part No: B3757R)$21.53
Valve Guide - For model 70 gas or LP. (Part No: F1222R)$21.42
Valve Guide - Used in Pony starting motor. For model R. (Part No: 184560)$12.51
Valve Guide -
  • For John Deere tractor models 1010, 2010< li>
  • Compatible with John Deere Combine(s) 45, 55, 95< li>
  • Compatible with John Deere Construction & industrial models 1010 (Crawler), 2010 (Crawler)< li>
  • Replaces John Deere OEM number T15683< li>
  • Length: 2.860"< li> < UL> (Part No: 168543)
$5.76
Valve Guide, Exhaust - For model 750. (Part No: CH16042)$16.54
Valve Guide, Exhaust - For model 850. (Part No: CH16044)$25.36
Valve Guide, Exhaust - For tractor models 770, 870, 950, 955, 970, 1050, 1070. Replaces CH16046, CH19595. (Part No: 168248)$5.46
Valve Guide, Intake - For model 750, intake & exhaust guide For tractor models 855, 856, 4200, 4300, 4400. (Part No: CH16041)$16.54
Valve Guide, Intake - For model 850. (Part No: CH16043)$25.36
Valve Guide, Intake - For tractor models 770, 870, 950, 955, 970, 1050, 1070. Replaces CH16045. (Part No: 168247)$5.76
Valve Guide, Intake & Exhaust - 8 used in 254 CID 4 cylinder diesel engine (block numbers R26160, R40910, R46350, R46430 only), 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 12 used in 381 CID 6 cylinder diesel engine; 12 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in multiples of 4 items. Change quantity once in cart to match your specific needs. (Part No: 166170)		$3.56
Valve, Intake - Valve, intake, 2 used per engine. For gas engine, 2 cylinder, 100 CID, 4 inch bore. 1.805 inch head diameter, 5.730 inch length, 30 degree valve face. Models: M, 40, 320, 330. Replaces M100T, 211-1782, AM675T (Part No: 128576)		$17.90
Valve, Intake - 4 used in 254 CID 4 cylinder diesel engine (block numbers R26160, R40910, R46350, R46430 only); 6 used in 381 CID 6 cylinder diesel engine. For tractor models 3010, 4010. (Part No: 156267)$14.00
Valve, Intake - For tractor models 3020, 4000, 4020, 4040, 4230, 4520. (Part No: TP-TP-R43883)		$13.13
Valve, Intake - For tractor models 4320, 4520, 4620, 7020. (Part No: TP-R43914)$29.10
Valve, Intake - 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Part No: 161172)		$10.70
Valve, Intake - For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-R50358)$25.72
Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Part No: 128629)		$7.80
Valve, Intake - For tractor models 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2840, 2940, 2950, 2955, 4030. (Part No: 128629)$7.80
Valve, Intake - For tractor models 2555, 2750, 2755. (Part No: R89219)$22.04
Valve, Intake - Valve, intake, standard, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Part No: 169003)$10.36
Valve, Intake - Single Intake Valve - For model B Serial #96000 and up, M. (Part No: 108980)		$24.26
Valve, Intake - For tractor models A, AH, AN, AW all with SN# after 488000. AO, AR both with SN# after 272001. 60. Intake Valve. (Part No: 128573)		$20.90
Valve, Intake - For model 850. (Part No: CH10055)$19.65
Valve, Intake - For model 1050. (Part No: CH15724)$34.65
Valve, Intake - For model 950. (Part No: CH10094)$26.36
Valve, Intake - For tractor models 770, 870, 955, 970, 1070. (Part No: 124093)$16.69
Valve, Intake - For tractor models 420, 430, 440. (Part No: 128645)$11.50
Valve, Intake - For tractor models (G from SN# 13000 and up), (70 with all fuel head). (Part No: 179502)		$42.00
Valve, Intake - For model 70 with gas or LP head. (Part No: R-F1219R)$40.95
Valve, Intake - Used in Pony starting motor. For model R. (Part No: R-R785R)		$18.38
Valve, Intake - For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). (Part No: 179182)		$24.76
Valve, Intake - For tractor models 620, 630. Replaces AA6584R. (Part No: A5627R)$26.78
Valve, Intake - For tractor models (B up to SN# 95999), BO, BR. (Part No: 179500)$19.76
Valve, Intake - For tractor models 520, 530. Replaces AB5202R. (Part No: B3749R)$19.64
Valve, Intake - For tractor models 720, 730 both with diesel engines. Replaces AF3191R. (Part No: F3213R)$40.95
Valve, Intake - For tractor models 80, (820, 830 both 2 cylinders). Replaces AR1384R. (Part No: R1336R)$35.59
Valve, Intake - For tractor models (70 diesel), R. Replaces AR585R. (Part No: 179490)$37.00
Valve, Intake - Intake valve for 2 cylinder model H. (Part No: 186930)$21.43
Valve, Intake - Intake Valve for model 1010 and 2010 with 115 CID gas after serial number 31000. (Part No: 128595)$20.76
Valve, Intake -
  • For John Deere tractor models 8440, 8450, 8560, 8630, 8640, 8650, 8760, 8960< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830< li>
  • Compatible with John Deere Construction & industrial models 744E, 762, 850, 855, 860B, 862, 862B, 890, 890A, 992D LC< li>
  • Compatible with John Deere Engine(s) 6076H, 6101, 6101H, 6466A, 6619A, 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number R75690, R59895, R81087, R63981< li>
  • 2.030" head diameter< li>
  • 6.660" length< li>
  • 30 degree< li> < UL> (Part No: 167390)
$21.00
Valve, Intake and Exhaust - Engine Valve for model GP. Priced Each. Intake and exhaust are the same. (Part No: 184997)$59.86
Valve, Intake & Exhaust - This exhaust valve is sold Each. It measures 7.31 inches overall length with a head diameter of 2.714 inches. For model D up to SN# 109943. Replaces D944R (Part No: 182723)$87.00
Valve, Intake OR Exhaust - This price is for ONE valve. Intake and exhaust are the same. Four are needed for each engine. For model D from SN# 109944 and up. Overall length 8.750 inches, Head Diameter 2.750 inches. Replaces Replaces: AD1871R, AD2379R, AD2845R, D1723R, D2287R, D3121R, D3411R . (Part No: 185429)$89.16
Valve Keeper -
  • For John Deere tractor models M, 40, 320, 330, 420, 430, 440, 520, 530, 3010, 3020, 4000, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A
  • Replaces John Deere OEM number B367R, B200A, B6466A< li> < li>
  • Compatible with Oliver tractor models Super 55, Super 66, Super 77, Super 88, 60, 66, 70, 77, 88, 550, 660, 770, 880, 1600
  • Replaces Oliver OEM number B6466A< li> < li>
  • Compatible with White tractor models 2-44, 2-180, 4-150, 4-175, 4-180, 4-210, 4-225< li>
  • Replaces White OEM number B6466A< li>
  • Sold per 1 2 valve, order 2 per valve< li>
  • 3 8" stem< li> < UL> (Part No: 128577)
$1.26
Valve Keepers - For B before Ser #96000. Valve keepers (per valve). If you need keepers for after serial # 96000, they are part number B1797R available only from a John Deere Dealer. (Part No: 128566)$0.70
Valve Lifter -
  • For John Deere tractor models 500, 600, 3010 (s n 049999-earlier), 3020, 4010, 4020 (s n 200999-earlier), 9430T, 9530T, 9630T< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 152141-earlier), 500B< li>
  • Compatible with John Deere Engine(s) 6135< li>
  • Replaces John Deere OEM number R26342< li> < UL> (Part No: 149881)
$9.20
Valve Lifter -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 8560< li>
  • Compatible with John Deere Combine(s) 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 9960< li>
  • Compatible with John Deere Engine(s) 6076 (Diesel, s n 499999-earlier)< li>
  • Replaces John Deere OEM number R105379< li> < UL> (Part No: 165616)
$8.16
Valve Lock - Pair - This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Part No: 185432)$21.99
Valve Lock Pair - For tractor models (A up to SN# 487999), (AO, AR both up to SN# 259999). (Part No: 180664)$21.50
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00
Valve Rotator -
  • For John Deere tractor models 1520, 1530, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 2940, 2950, 2955, 3020, 3055, 3150, 3155, 3255, 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7700, 7800, 8100, 8200, 8300, 8430, 8440, 8450, 8560, 8570, 8760, 8770, 8870< li>
  • Compatible with John Deere Construction & industrial models 210C, 302, 302A, 310, 310A, 310B, 310C, 315C, 340D, 344E, 350C, 350D, 355D, 400G, 401A, 401B, 401C, 401D, 410, 410B, 410C, 415B, 440A, 440B, 440C, 440D, 444D, 444E, 450A, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480A, 480B, 480C, 482C, 490, 500B, 500C, 510, 510B, 510C, 540B, 540D, 544B, 544D, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570B, 590D, 595, 595D, 600, 610B, 610C, 624E, 640, 640D, 643, 643D, 644, 644A, 644C, 644D, 644E, 644G, 646, 646B, 646C, 648D, 650G, 655, 655B, 670, 670A, 670B, 672A, 672B, 690, 690A, 690B, 690C, 690D, 693B, 693C, 693D, 710C, 740, 740A, 740E, 743, 743A, 748E, 748G, 750, 750B, 755, 755A, 755B, 762A, 762B, 770A, 770B, 772A, 772B, 790, 790D, 792, 850B, 850C, 862B< li>
  • Compatible with John Deere Engine(s) 164, 179, 219, 270, 359, 404, 6076T, 6101A, 6101H< li>
  • Replaces John Deere OEM number RE11410< li>
  • Intake & Exhaust< li> < UL> (Part No: 128678)
$7.46
Valve Seal -
  • For John Deere tractor models 3010 (Grove & Orchard, Row-Crop Standard & Utility), 3020 (Utility, s n 122999-earlier), 3020 (s n 123000-later), 4010, 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number AR41690< li> < UL> (Part No: 166075)
$2.70
Valve Seat -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450, 4455, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 646C, 690B, 690C, 690CR, 693B, 693B (Canada), 693C, 740 (Skidder and Grapple Skidder), 740A, 743, 743A, 762A, 762B, 770A, 770B, 770BH, 772A, 772B, 772BH, 790, 790D, 792, 793 (D), 850B, 892 (DLC)< li>
  • Compatible with John Deere Engine(s) 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R78702< li> < UL> (Part No: 167396)
$2.22
Valve Seats -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) 9750 STS, 9860 STS< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 7700, 7800< li>
  • Compatible with John Deere Construction & industrial models 450CLC, 744H, 744J, 824J, 844J< li>
  • Replaces John Deere OEM number R504713< li> < UL> (Part No: 166245)
$16.05
Valve Service Kit - Cylinder HEAD Service KIT For 1020. Contains: springs, guides, locks, (no valves). (Part No: VSKD135)$23.77
Valve Service Kit - Cylinder head Service kit. For tractor models 1020, 1520, 1530, 2040, 2150, 2240, 2255. Contains: springs, guides, locks, (no valves). (Part No: VSKD152)$57.17
Valve Service Kit - Cylinder HEAD Service KIT For 2020, 2510, 2520. Contains: springs, guides, locks, (no valves). (Part No: VSKD180)$31.72
Valve Service Kit - Cylinder HEAD Service KIT For 1530, 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 3020. Contains: springs, caps, locks, (no valves or guides). (Part No: VSKD202)$76.26
Valve Service Kit - Cylinder HEAD Service KIT For 4010, 4020. Contains: springs, guides, locks, (no valves). ENGINE CID: 381D, 404D 6 Cyl Diesel. (Part No: VSKD381)$141.02
ValveService Kit - Cylinder HEAD Service KIT For tractor models 2840, 2940, 2950, 2955, 4000, 4020, 4030, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. Contains: springs, guides, locks, (no valves). (Part No: VSKD329)$114.37
Valve Spring - For model D SN# up to 109943. (Part No: 184568)$25.20
Valve Spring - For tractor models 620, 630. (Part No: A4936R)$18.00
Valve Spring - For tractor models 50, (B from SN# 96000 and up). (Part No: B1794R)$25.68
Valve Spring - For tractor models 520, 530. (Part No: B3751R)$25.20
Valve Spring - For model D from SN# 109944 and up. (Part No: 184569)$28.56
Valve Spring - For tractor models 70, 720, 730 all with diesel (Part No: F2143R)$26.98
Valve Spring - For tractor models G, (70 Gas, LP, & All-Fuel, Intake Only). (Part No: 184561)		$25.20
Valve Spring - For tractor models 80, (820, 830 both 2 cylinders). (Part No: R1338R)$25.20
Valve Spring - For tractor models 60, A, AO, AR, R. (Part No: 184186)		$19.50
Valve Spring - Exhaust only. For tractor models (70 gas, LP & all-fuel), (720, 730 gas, LP). (Part No: 179434)$19.76
Valve Spring - Valve spring for model H. (Part No: 184570)$26.58
Valve Spring - For tractor models For model 1010 and 2010 with 115 CID gas after serial number 31000. (Part No: 128588)$6.16
Valve Spring -
  • For John Deere tractor models M, MC, MT, 40, 320, 330, 420, 430, 440< li>
  • Compatible with John Deere Engine(s) 100 (2 cylinder gas), 113 (2 cylinder gas)< li>
  • Replaces John Deere OEM number M102T, 212-1096< li> < UL> (Part No: 128580)
$4.66
Valve Spring -
  • For John Deere tractor models 3010, 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Combine(s) 105 (s n 4501-19000)< li>
  • Compatible with John Deere Construction & industrial models 500 (late), 500A (s n 123113-earlier), 600 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 201, 227, 301, 341< li>
  • Replaces John Deere OEM number R26110< li>
  • Replaces manufacturer number 212-1111< li> < UL> (Part No: 128596)
$3.66
Valve Spring -
  • For John Deere tractor models 9100, 9200, 9300, 9300T, 9400, 9400T< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950< li>
  • Compatible with John Deere Construction & industrial models 744H< li>
  • Replaces John Deere OEM number R133891< li> < UL> (Part No: 167382)
$4.40
Valve Spring Retainer - For tractor models (A up to SN# 487999), (AO, AR up to SN# 271999), R. (Part No: A245R)		$30.75
Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Part No: 121443)		$2.26
Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Part No: 121443)		$2.26
Valve Train Kit -
  • For John Deere tractor models 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 6710< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 862B, 992ELC< li>
  • Compatible with John Deere Engine(s) 6101A (diesel, s n 499999-later), 6101H (diesel, s n 499999-later)< li>
  • Replaces John Deere OEM number R101304, R101305, R108988, R91822, T20077< li>
  • Bore: 5.125"< li>
  • Intake Valve: 2.085" head diameter, 6.540" length, 30 degree< li>
  • Exhaust Valve: 2.085" head diameter, 6.595" length, 37.5 degree< li>
  • Valve Guide: 0.375" I.D.< li>
  • Kit Includes: Intake & Exhaust Valves, Guides, Springs and Keepers< li> < UL> (Part No: 160872)
$520.00
Valve Train Kit -
  • For John Deere tractor model 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial model 500, 500A (s n 123113-earlier)< li>
  • Compatible with John Deere Engine(s) 270 (Diesel, Replacement Block), 270 (Diesel, Original Block s n 50000-124999)< li>
  • Engine Bore: 4.250"< li>
  • Keepers: 3 8" stem< li>
  • Intake Valves: 1.897" head diameter, 6.250" length, 45 degree< li>
  • Exhaust Valves: 1.710" head diameter, 6.228" length, 45 degree< li>
  • Kit Includes: Intake & Exhaust Valves, Guides, Springs and Keepers< li> < UL> (Part No: 160885)
$250.00
Valve Train Kit -
  • For John Deere tractor models 4430, 4630< li>
  • Compatible with John Deere Combine(s) 6602, 7700< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere OEM number R59876< li> < UL> (Part No: 163352)
$400.00
Valve Train Kit -
  • For John Deere tractor models 480, 2030, 2510, 2520< li>
  • Compatible with John Deere Combine(s) 45, 3300< li>
  • Compatible with John Deere Harvester(s) 482, 499< li>
  • Compatible with John Deere Construction & industrial models 400, 401, 401B, 401C, 410, 440, 450, 2020< li>
  • Compatible with John Deere Engine(s) 180, 202, 219< li>
  • Compatible with John Deere Hay Cutting(s) 880< li>
  • (8) Valve Springs< li>
  • (16) Valve Keepers< li>
  • (4) Intake Valves< li>
  • (4) Exhaust Valves< li> < UL> (Part No: 169631)
$120.00
Valve Train Kit -
  • For John Deere tractor models 2020 (s n 158258-later), 2030 (4.219 engine s n 275483-later), 2320 (4.219 engine s n 275483-later), 2440 (4.219 engine s n 275483-later), 2510 (s n 158258-later), 2530 (4.219 engine s n 275483-later), 2630, 2640, 3300 (4.219 engine s n 275483-later)< li>
  • Compatible with John Deere Combine(s) 3300 (4.219 engine s n 275484-later)< li>
  • Compatible with John Deere Harvester(s) 499 (4.219 engine s n 275484-later)< li>
  • Compatible with John Deere Construction & industrial models 310B (4.219 engine s n 275484-later), 340D, 344E, 400 (s n 158258-later), 401 (s n 275483-later), 401A (s n 275483-later), 401B (4.219 engine s n 275484-later), 401C (4.219 engine s n 275484-later), 401D (4.219 engine s n 275484-later), 410 (4.219 engine s n 275484-later), 410B (4.219 engine s n 275484-later), 410C, 410D, 440 (s n 275483-later), 440B (4.219 engine s n 275484-later), 440C, 450A (s n 275483-later), 450B (s n 275483-later), 450C (4.219 engine s n 275484-later), 450D (4.219 engine s n 275484-later), 450E, 450G, 455D (4.219 engine s n 275484-later), 455E, 480 (s n 158258-later), 480A (s n 275483-later), 480B (4.219 engine s n 275484-later), 480C (4.219 engine s n 275484-later), 490D, 493D, 510B, 540B (4.219 engine s n 275484-later)< li>
  • Compatible with John Deere Hay Cutting(s) 2270 (s n 275483-later), 2270 (4.219 engine s n 275484-later), 2280 (4.219 engine s n 275484-later), 2420 (s n 275483-later)< li>
  • Replaces John Deere OEM number R79623, R79624, R96456, R51734, T20129, 33K701, R26125, RE11410, R87627< li>
  • Size: Standard< li>
  • Kit includes: (4) intake valves, (4) exhaust valves, (4) intake valve inserts, (4) exhaust valve inserts, (8) valves stem caps, (16) valve keepers, (8) valve springs, (4) valve rotators, (4) valve stem o-rings< li> < UL> (Part No: 176570)
$184.00
Valve Train Kit -
  • For John Deere tractor models 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640< li>
  • Compatible with John Deere Combine(s) 3300, 4400< li>
  • Compatible with John Deere Construction & industrial models 210C, 290D, 310A, 310B, 310C, 315C, 340D, 344E, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 410C, 415B, 440, 440A, 440B, 450, 450B, 450C, 450E, 450G, 455G, 480, 480A, 480B, 480C, 482C, 490D, 493D, 510B< li> < UL> (Part No: 186250)
$65.00
Valve Train Kit -
  • For John Deere tractor models 2840, 2940, 2950, 2955, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 4030< li>
  • Compatible with John Deere Combine(s) 55, 95, 4400, 4420, 4425, 4435, 6600< li>
  • Compatible with John Deere Harvester(s) 482, 484, 499, 699, 7440, 9900, 9910, 9920< li>
  • Compatible with John Deere Construction & industrial models 444, 444D, 540, 540A, 544A, 570, 570A, 570B, 710B< li>
  • Compatible with John Deere Engine(s) 303, 329, 6359D, 6414D< li>
  • 45 degree intake and exhaust valves< li>
  • Kit includes: Intake and exhaust valves, valve springs, valve keepers, and valve rotators< li> < UL> (Part No: 186314)
$115.00
 
Engine Pistons and Sleeves
Cylinder Liner Deck Plate - This Cylinder Liner Deck Plate is used on John Deere 1010 with a 115 Cubic Inch Gas. It is also used in John Deere Baler 323 (EA115G), Combines 40 (HA115G), 1010 Crawler, (Power Units: EA115G, EB115G, HA115G, HB115G, NA115G) (Sprayers 600, 700 Hi-Cycle (NA115G)) (Windrowers 215, 215A (EB115G, HB115G)) It replaces John Deere Part Number AT12215 (Part No: 185671)		$2755.51
Exhaust Sleeve - Use with R0318. For tractor models 4050, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4650, 4840, 4850, 7020, 8430, 8440. (Part No: 101611)$44.90
JD Sleeve & piston kit - 1 kit used per engine. For JD 6650, 6610, 6615, 6715, 7210, 6405, 7410, 7420, 7500, 7510, 7610 model tractors. With 6.8T Diesel Power tech Engines. (Part No: PKD68TH)$1208.78
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Sleeves and 5 ring pistons & rings, pins & retainers, for 4-1 4 bore. For 3010, 3020 (Part No: PK431)$589.29
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 gas, 4 cylinder 227 CID, to SN# 122999. Use with block numbers R33190 & R40840 only. Sleeves & 4 ring pistons & rings, pins & retainers, for 4-1 4 bore. For 3020 (Part No: PK432)		$401.41
Piston Kit - PISTON KIT for 1 cylinder. For 3010, 3020 (Part No: PK436)$123.45
Piston Kit - PISTON KIT For 4000, 4010, 4020 (Part No: PK437)$932.18
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 4010 gas, 6 cylinder 301 CID. Use with blocks except numbers R40940, R49550 only. Sleeves and 5 ring pistons & rings, pins & retainers, for 4-3 16 bore. For 4010 (Part No: PK440)$840.83
Piston Kit - PISTON KIT For 4010, 4020 (Part No: PK441)$935.39
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 1520 diesel, 3 cylinder 164 CID. Engine SN# 160310 & up. Sleeves- no grooves on sleeve, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers, for 4.02 bore. For 1520 (Part No: PK449)$474.61
Piston Kit - Sleeves-no grooves on sleeves, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers. 1 used per engine. For 164 CID 3 cylinder, diesel engine serial number 178601 to 179600 only. 4.02 standard bore~ 3 ring piston, keystone top compression r For 1530 (Part No: PK450)$386.04
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 2520 diesel, 4 cylinder 219 CID. Engine SN# 157576 & up. Sleeves- no grooves on sleeve, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers, for 4.02 bore. For 2030, 2520 (Part No: PK453)$655.36
Piston Kit - Sleeves-no grooves on sleeves, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers. 1 used per engine. For 219 CID 4 cylinder, diesel engine serial number 211700 to 275484. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 2030 (Part No: PK454)$389.27
Piston Kit - Sleeves-no grooves on sleeves, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers. 1 used per engine. For 329 CID 6 cylinder, diesel engine to serial number 277549. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 4030 (Part No: PK455)$983.08
Piston Kit - Sleeves & 3 ring pistons, rings, pins & retainers. 1 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 4040, 4230 (Part No: PK456)$1089.57
Piston Kit - Keystone Top Compression Ring. For tractor models 4320, 4520, 4620, 7020. (Part No: PK457)$1207.49
Piston Kit - Keystone Top Compression Ring. For tractor models 4430, 4630, 7020. (Part No: PK458)$1253.98
Piston Kit - Engine SN# -231856 & Blocks Marked R74352 Keystone Top Compression Ring With Connecting Rod marked R57303, R67320 For 4440, 4640, 4840, 8430, 8440, 8450 (Part No: PK460)$1081.60
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Sleeves and 3 ring pistons & rings, pins & retainers, for 4-1 4 bore. For 3010, 3020 (Part No: PK470)$773.74
Piston Kit - Keystone Top Compression Ring. For tractor models 4010, 4020. (Part No: PK471)$1137.82
Piston Kit - Sleeves, 3 ring pistons & rings, 1-3 8 outside diameter pins & retainers. 1 used per engine. 164 CID 3 cylinder diesel non-turbo engine to serial number 349999~ 4.02 standard bore. For standard compression engines with pistons marked B, 3 ring piston For 1530, 2040 (Part No: PK475)$391.91
Piston Kit - Sleeves-no grooves on sleeves, 3 ring pistons and rings, 1-3 8 outside diameter pins & retainers. 1 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277550 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 2840, 4030 (Part No: PK477)$901.14
Piston Kit - Keystone Top Compression Ring. For tractor models 4010, 4020. (Part No: PK6409)$1021.50
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Sleeves and 3 ring pistons & rings, pins & retainers, for 4-1 4 bore. For 3020 (Part No: PKD270)$738.69
Piston Kit - PISTON KIT For 4000, 4020 (Part No: PKD404)$1106.06
Piston Kit - For Standard Compression Engines With Piston Marked B For 2350, 2355, 2550, 2555 (Part No: PKD461)$483.19
Piston Kit - For Std. Compression Engine With Piston Marked B For 2555, 2750, 2755 (Part No: PKD462)$569.40
Piston Kit - Sleeves, 3 ring pistons & rings, 1-3 8 outside diameter pins & retainers. 1 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: PKD463)$447.40
Piston Kit - For Std. Compression Engines With Piston Marked B For 2940, 2950, 2955 (Part No: PKD465)$863.69
Piston Kit - For Std. Compression Engines With Pistons Marked B For 2040, 2150, 2240, 2255 (Part No: PKD478)$430.09
Piston Kit - Engine SN# 252663- Connecting Rod marked R71074 Keystone Top Compression Ring For 4250, 4440, 4450, 4640, 4650, 6620, 7720 (Part No: PKD6466)$1382.73
Piston Liner Kit - For 1 cylinder. Kit contains piston, sleeve, o-rings, piston rings, piston pin and snap rings. For tractor models (1420, 1520, 1530, 350B SN# 179601 and below with 3.164D eng.), (2030, 2270, 2320, 2420, 401, 401A, 440, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (3120, 4020, 4030, 4420, 499, 540A, 570A, 699 SN# 277548 and below with 6.329 eng). (Part No: 166409)$66.00
Piston Pin Bushing - 6 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1 4 standard bore 4 ring piston. For tractor models 3010, 3020, 4010, 4020. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Part No: 166241)$4.86
Piston Pin Bushing - Piston pin bushing, 6 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, (500B, 500C, 510 SN# 280000 and up), (600 SN# 335845 and below), (6600 SN# 215000 and up), (7700 SN# 215000 and up), (JD500, JD500A, JD500B SN# 280000 and below). Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Part No: 163383)$5.46
Piston Pin Bushing - For tractor models 4320, 4430, 4520, 4620, 4630, 7020. (Part No: 167483)$7.86
Piston Pin Bushing - Bushing, for 1-3 8 outside diameter piston pin. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277550 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1530, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2840, 2940, 2950, 2955, 4030 (Part No: 166194)$2.46
Piston Pin Bushing - Bushing, for 1-3 8 outside diameter piston pin. 4 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: 167190)$3.70
Piston Pin Bushing - For tractor models 2555, 2750, 2755. (Part No: TP-R57451)$14.68
Piston Pin Bushing - For tractor models 4440, 4640, 4840, 8430, 8440, 8450. For trapezoid shaped bushing, not rectangular. (Part No: TP-R60724)$21.05
Piston Pin Bushing - For tractor models 4250, 4440, 4450, 4640, 4650, 6620, 7720. Price shown is for each, sold only in multiples of 6 items. (Part No: TP-R74008)		$27.86
Piston Pin Bushing - Bushing, for 1-3 16 outside diameter piston pin. 6 used per engine. For 329 CID 6 cylinder, diesel engine to serial number 277549. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2510, 2520, 4030 (Part No: 156030)$6.20
Piston Pin Bushing - Piston pin bushing, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 & up. For 2010 with 145 CID Gas Engine 3.86 standard bore 3 ring piston. For 1020, 2010, 2020, 2510, 2520 (Part No: 108007)$20.49
Piston Pin Bushing - For model A with rod no. A2344R, G, 60, 70, 620. (Part No: 108184)$14.76
Piston Pin Bushing - For 1.417" Diameter Piston Pin. On tractor models B From S#96000, 50, 520. All with rod numbers B3201R, B3652R or B1770R. 2 Required per engine. (Part No: 184564)$16.50
Piston Pin Bushing - For model H with rod nos. H209R, H800R. (Part No: 815068)$14.25
Piston Pin Bushing - For tractor models M, MT, 40, 320, 330, 420, 430, 440. All with rod nos. M29T, M1691T. 2 Required per engine. Sold each. (Part No: 128589)$16.76
Piston Pin Bushing - For tractor models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Part No: 156030)$6.20
Piston Pin Bushing - For tractor models 650, 750. Replaces CH15482. (Part No: M808605)$10.27
Piston Pin Bushing - For model 850. (Part No: CH10357)$14.36
Piston Pin Bushing - For tractor models 950, 1050. (Part No: M806859)$21.35
Piston Pin Bushing - For tractor models 770, 870, 955, 970, 1070. (Part No: 124091)$6.96
Piston Sleeve - For tractor models 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4755, 4760, 4840, 4850, 4955, 4960, 5460, 5720, 5730, 644C, 644D, 644E, 644ER, 646A, 6602, 6620, 6622, 690C, 740A, 740E, 740G, 748E, 748G, 762A, 762B, 7700, 770A, 770B, 770BH, 7800, 790D, 792D, 792LC, 8100, 8300, 8430, 8440, 8450, 850B. All with either 6.466D, 6.076H, 6.076T, 6.076A, 6.466T, or (6.466A up to SN# 233592 and above 317859)engines. (Part No: AR63060)$55.64
Piston Sleeve - For tractor models 850C, 8820, 892D, 892E, 892LC, 9500, 9600, 9940, 9950, 9960, 9965. All with either 6.466D, 6.076H, 6.076T, 6.076A, 6.466T, or (6.466A up to SN# 233592 or above 317859) engines. (Part No: AR63060)$55.64
Piston Sleeve - For tractor models (500, 500A, 500B, 3010, 3020 up to SN# 180000 with 4.270 4 cylinder and early power booster engine), (600, 4000, 4010, 4020 SN# up to 214999 with 6.404D engine). (Part No: 167276)$57.00
Piston Sleeve, Wet - With o-rings. For model 850. (Part No: 185023)$125.00
Piston Sleeve, Wet - With o-rings. For model 950. (Part No: CH13598)$127.63
Piston, Std - Standard piston, 80mm with pin and clips. For model 850, 900HC. Includes Piston Rings Part Number CH12046. (Part No: 191336)		$75.75
Piston, Std - 90mm with pin and clips. For model 950. (Part No: CH11803)$106.95
Sleeve Assembly - 4.020 Bore with 1 3 16 Piston Pin For 1420, 1520, 1530 with 164 Diesel Engine (SN # 160310 to 179601). Sold individually. (Part No: R-AR71593)$62.00
Sleeve Assembly - 4.020 Bore with 1 3 16 Piston Pin For 2030, 2270, 2320, 2420 with 219 Diesel Engine (SN # 160310 to 179601). Sold individually. (Part No: R-AR71593)$157.85
Sleeve Assembly - 4.020 Bore with 1 3 16 Piston Pin For 3120, 4020, 4030, 4420 with 329 Diesel Engine (SN # 160310 to 179601). Sold individually. (Part No: R-AR71593)$157.85
Sleeve Assembly (3 Required) - 3.858 Bore with O-Rings on Sleeve For 820, 830, 1020, 1030 with 152 Diesel Engine (To S#154765) (Part No: R-CK3481)$119.56
Sleeve Assembly (3 Required) - 4.020 Bore with O-Rings on Sleeve For 1520 with 164 Diesel Engine (To Engine SN#160309). (Part No: R-CK8310)$152.03
Sleeve Assembly (3 Required) - 4.020 Bore with 1 3 8 Piston Pin For 1530, 2040, 2330 with 164 Diesel Engine (From S#179601) (Part No: R-AR78041)$125.56
Sleeve Assembly (3 Required) - 4.190 Bore For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Part No: R-RE30250)$127.86
Sleeve Assembly (3 Required) - 4.190 Bore. For tractor models 2355N, 5400, 5500 with 179 or 3029 Turbo Diesel Engine. (Part No: R-RE33115)$128.99
Sleeve Assembly (4 Required) - 3.858 Bore with O-Rings on Sleeve For 1120, 2020, 2510 with 202 Diesel Engine (To S#158257) (Part No: R-CK3481)$119.56
Sleeve Assembly (4 Required) - 3.858 Bore with O-Rings in Block For 2020, 2510 with 202 Diesel Engine (From S#158258) (Part No: 166127)$98.00
Sleeve Assembly (4 Required) - 4.020 Bore with O-Rings on Sleeve For 2520 with 219 Diesel Engine (To S#275483) (Part No: R-CK8310)$152.03
Sleeve Assembly (4 Required) - 4.020 Bore with 1 3 8 Piston Pin For 2030, 2270, 2280, 2320, 2440, 2530 with 219 Diesel Engine (From S#275483) (Part No: R-AR78041)$125.56
Sleeve Assembly (4 Required) - 4.190 Bore For 2350, 2355, 2550, 2555 with 239 or 4039 Diesel Engine (Part No: R-RE30250)$127.86
Sleeve Assembly (4 Required) - 4.190 Bore. For tractor models 2750, 2755, 2850, 2855 with 239 or 4039 Turbo Diesel Engine. (Part No: R-RE33115)$128.99
Sleeve Assembly (4 Required) - 4 1 4 Bore with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385 (Part No: 128722)$126.00
Sleeve Assembly (4 Required) - 4 1 4 Bore with Power Booster Pistons with Original Block. For tractor models 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. (Part No: R-CK270-EPB)$174.35
Sleeve Assembly (4 Required) - 4 1 4 Bore with Replacement Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910 (Part No: R-RE23170)$163.01
Sleeve Assembly (4 Required) - 4 1 4 Bore For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-RE23165)$163.01
Sleeve Assembly (4 Required) - 4 1 4 Bore with Power Booster Pistons For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-RE23160)$180.74
Sleeve Assembly (4 Required) - 4.190 Bore with 1 3 8 Piston Pin. For tractor models 2630, 2640 with 276 Diesel Engine. (Part No: R-RE19831)$138.21
Sleeve Assembly (4 Required) - 4.190 Bore For 6400, 6410, 6500, 6510, 6700 with 276 or 4045 Turbo Diesel Engine (Part No: R-RE19832)$150.88
Sleeve Assembly (6 Required) - 4.020 Bore with O-Rings on Sleeve For 3120 with 329 Diesel Engine (To Engine SN#160309). (Part No: R-CK8310)$152.03
Sleeve Assembly (6 Required) - 4.020 Bore with 1 3 8 Piston Pin For 2840, 3130, 3530, 4030, 4400, 4425 with 329 Diesel Engine (From S#277549) (Part No: R-AR78041)$125.56
Sleeve Assembly (6 Required) - 4.190 Bore. For tractor models 2940, 2950, 2955, 3150, 3155 with 359 or 6059 Diesel Engine. (Part No: R-RE30250)$127.86
Sleeve Assembly (6 Required) - 4.190 Bore. For tractor models 4040, 4050, 6600, 7200 with 359 or 6059 Turbo Diesel Engine. (Part No: R-RE33115)$128.99
Sleeve Assembly (6 Required) - 4 1 4 Bore with Original Block For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890 (Part No: 128722)$126.00
Sleeve Assembly (6 Required) - 4 1 4 Bore with Power Booster Pistons with Original Block. For tractor models 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890. (Part No: R-CK270-EPB)$174.35
Sleeve Assembly (6 Required) - 4 1 4 Bore with Replacement Block For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #R40930 (Part No: R-RE23170)$163.01
Sleeve Assembly (6 Required) - 4 1 4 Bore For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Part No: R-RE23165)$163.01
Sleeve Assembly (6 Required) - 4 1 4 Bore For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) with Power Booster Pistons & All models with 6.404 diesel Engine (From Eng SN# 335845 and up) (Part No: R-RE23160)$184.18
Sleeve Assembly (6 Required) - 4 1 4 inch bore. For tractor models 4320, 4520, 4620 with 404T, A Diesel Engine (to engine serial number 335845). (Part No: 167491)$126.00
Sleeve Assembly (6 Required) - 4 1 4 Bore. For tractor models 4320, 4430, 4630 with 404T, A DieselEngine (From Eng S#335846). (Part No: 127164)$179.00
Sleeve Assembly (6 Required) - 4.190 Bore. For tractor models 6800, 6900, 7210, 7400, 7410, 7600 with 414 or 6068 Turbo Diesel Engine. (Part No: R-RE19832)$150.88
Sleeve Assembly (6 Required) - 4.563 Bore. For tractor models 4050, 4240 with 466 Diesel Engine. (Part No: R-AR83610)$198.24
Sleeve Assembly (6 Required) - 4.563 Bore. For tractor models 4440, 4640, 4840 with 466T, A Diesel Engine - A (To Eng S#233592), T (To Eng S#253372) (Part No: R-AR72079)$184.28
Sleeve Assembly (6 Required) - 4.563 Bore For 4250, 4440, 4450, 4640, 4650 with 466T, A Diesel Engine A (From Eng S#317859), T (From Eng S#253373) (Part No: R-AR100646)$189.24
Sleeve Assembly (6 Required) - 4.563 Bore For 4840, 4850, with 466A Diesel Engine (Eng S#233593-317858) (Part No: R-AR100960)$203.45
Sleeve Assembly (6 Required) - 4 3 4 Bore. For tractor models 6030, 7520 with 531A Diesel Engine. (Part No: R-CK3227)$338.08
Sleeve Assembly (6 Required) - 5 1 8 Bore For 8630 with 619 Diesel Engine (To Eng S#33814). (Part No: R-AR84089)$307.85
Sleeve Assembly (6 Required) - 5 1 8 Bore For 8630, 8640, 8650 with 619 Diesel Engine (Eng S#33815-49059)Reference ID R-RE20291 (Part No: 189184)$156.00
Sleeve Assembly (6 Required) - 5 1 8 Bore For 8630, 8640, 8650 with 619 Diesel Engine (From Eng S#49060) (Part No: R-RE40476)$258.70
Sleeve & Piston, 135 Gas - 3.858 Bore with O-Rings in Block. For model 1020 (From S#162079) with 135 Gas Engine. Price is for one cylinder. 3 required. Replaces AR71590 (Part No: 187329)		$183.76
Sleeve & Piston Kit - For one hole. Fits Models: (1020 gas with SN# up to 162078), (2020 SN# up to 159926), (2510 gas with block # T23405, T24960, T26932), (300, 350, 400, 450, 480 early models). Reference SK404 (Part No: 189185)$129.00
Sleeve & Piston Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. One set used per engine. Kit includes: Sleeves - 2 grooves on sleeve, 3 ring pistons & rings, pins & retainers, for 3.86 bore. (Part No: PK444)$489.90
Sleeve & Piston Kit - For 2510 Gas with block # T32349 Only. 4 Cylinder, 180 CID. One set used per engine. Kit includes: Sleeves - 2 grooves on sleeve, 3 ring pistons & rings, pins & retainers, for 3.86” bore. (Part No: PK445)$705.18
Sleeve & Piston Kit - For 2510 Diesel with block numbers T23406, T24961 & T26933 Only. 4 Cylinder, 202 CID. One set used per engine. Kit includes: Sleeves - 2 grooves on sleeve, 3 ring pistons & rings, 1-3 16" O.D. pins & retainers, for 3.86” Std bore. (Part No: PK451)$583.53
Sleeve & Piston Kit - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86” Std bore. One set used per engine. Kit includes: Sleeves - no grooves on sleeve, 3 ring pistons & rings, 1-3 16" O.D. pins & retainers, for 3.86” Std bore. (Part No: PK452)$559.13
Sleeve & Piston Kit - For 3010 Gas with block #R26150 Only. 4 Cylinder, 201 CID, Overbore 4 to 4-3 16 inches, 5 Ring Piston. One set used per engine. Kit includes: Sleeves & 5 ring pistons & rings, pins & retainers for 4-3 16“ bore. (Part No: PK430)$576.73
Sleeve & Piston Kit - For 3010 Diesel with block #R26160 Only. 4 Cylinder, 254 CID, Overbore 4-1 8“ to 4-1 4“ Only. 3 Ring Piston, Keystone top compression ring.. One set used per engine. Kit includes: Sleeves & 3 ring pistons & rings, pins & retainers for 4-¼” bore. (Part No: PK4409)$841.69
Sleeve & Piston Kit - Complete kit for one cylinder. 3.86" bore, 1.185" pins. O-rings in block. (3) required For tractor models 1020, 1030, 300, 300A, 300B, 301A, 350A, 350B, 380, 820, 830 all SN# 154766 and up with 3.152D engine. (4) required For tractor models 2020, 2510, 400, 440, 480 all SN# 158257 and up with 4.202 engine. (6) required For tractor models 3420, 544 SN# 158976 and up with 6.303 engine. Kit comes with piston, pins, sleeve, rings. (Part No: 166127)$98.00
Sleeve & Piston Kit - 3.858 Bore with O-Rings on Sleeve For 2520 (To S#157353) with 202 Gas Engine. (Part No: R3435)$791.31
Sleeve & Piston Kit - 3.858 Bore with O-Rings in Block For 2520 (From S#157354) with 202 Gas Engine. (Part No: R3434)$814.08
Sleeve & Piston Kit - 4 1 4 Bore. For tractor models 3020 (To S#122999) with 227 Gas Engine. (Part No: 184553)$588.25
Sleeve & Piston Kit - 4.1875 Overbore. For model 4010 with 301 Gas Engine. (Part No: R3443)$854.28
Sleeve & Piston Kit - 4 1 4 Bore. For model 4020 (To S#200999) with 341 Gas Engine (Part No: R3444)$675.68
Sleeve & Piston Kit, 135 Gas - Complete, one used per engine. For 1020 gas, 3 cylinder 135 CID. To engine SN# 162078. Sleeves-2 grooves on sleeve, 3 ring pistons & rings, pins & retainers, 3.86 standard bore. (Part No: PK442)$408.25
Sleeve & Piston Kit, 135 Gas - 3.858 Bore with O-Rings on Sleeve For 1020 (To S#162078) with 135 Gas Engine (Part No: R3429)$572.70
Sleeve & Piston Kit, 152 Diesel - Complete, one used per engine. For 1020 diesel, 3 cylinder 152 CID. To engine SN# 154765. Sleeves-2 grooves on sleeve, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers, for 3.86 bore. For 1020 (Part No: PK447)$510.26
Sleeve & Piston Kit, 152 Diesel - Complete, one used per engine. For 1020 diesel, 3 cylinder 152 CID. Engine SN# 154766 & up. Sleeves- no grooves on sleeve, 3 ring pistons & rings, 1-3 16 outside diameter pins & retainers, for 3.86 bore. For 1020 (Part No: PK448)$446.04
 
Engine Rings
Engine Rings - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. One set used per engine. Set for 3 ring piston. (Part No: PRS444)$98.15
Engine Rings - For 2510 Gas with block # T32349 Only. 4 Cylinder, 180 CID. One set used per engine. Ring set for 3 ring piston. (Part No: PRS445)$98.15
Engine Rings - For 2510 Diesel with block numbers T23406, T24961 & T26933 Only. 4 Cylinder, 202 CID, 3.86” Std bore. One set used per engine. Ring set for 3 ring piston. (Part No: 120921)$22.76
Engine Rings - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86” Std bore. One set used per engine. Ring set for 3 ring piston. (Part No: PRS452)$98.15
Engine Rings - For 3010 and 4010 Gas. 201 CID, Overbore 4-3 16. 5 Rings: 3 at 3 32", 2 at 1 4". Sold as a 2 cylinder set. For 4 cylinder engine, order quantity 2. For 6 cylinder engine, order quantity 3. (Part No: PRS430)$95.00
Engine Rings - For 3010 Diesel with block #R26160 Only. 4 Cylinder, 254 CID, Overbore 4-1 8 to 4-1 4 Only. 3 Ring Piston, Keystone top compression ring. Includes: One set used per engine. Ring set for 3 ring piston. (Part No: PRS4409)$87.49
Orifice -
  • For John Deere Construction & industrial model 850J< li>
  • Replaces John Deere OEM number RE522991< li> < UL> (Part No: 159778)
$23.76
Pinion - First Planet Sun Gear -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR71145< li> < UL> (Part No: 123611)
$770.00
Piston -
  • For John Deere tractor models 820 (3.152 engine s n 154765-earlier), 820 (3.152D engine s n 154766-later), 830 (3.152D engine s n 154766-later), 1020 (3.152 engine s n 154765-earlier), 1020 (3.152D engine s n 154766-later), 1030 (3.152 engine s n 154765-earlier), 1030 (3.152D engine s n 154766-later), 2020, 2510< li>
  • Compatible with John Deere Construction & industrial models 300 (3.152 engine s n 154765-earlier), 300 (3.152D engine s n 154766-later), 300A (3.152 engine s n 154765-earlier), 300A (3.152D engine s n 154766-later), 300B (3.152D engine s n 154766-later), 301A (3.152D engine s n 154766-later), 350A (3.152 engine s n 154765-earlier), 350A (3.152D engine s n 154766-later), 350B (3.152 engine s n 154765-earlier), 350B (3.152D engine s n 154766-later), 380 (3.152 engine s n 154765-earlier), 380 (3.152D engine s n 154766-later), 400, 440, 450 (4.202 engine s n 158257-earlier), 544, 3420 (6.303 engine s n 158976-later)< li>
  • Replaces John Deere OEM number T23481< li> < UL> (Part No: 176711)
$72.97
Piston Pin -
  • For John Deere tractor models 2140, 2155, 2250, 2450, 2555, 2650, 2750, 2755, 2850, 2855, 2855N, 5400N, 5500, 5500N, 5700, 6100, 6200, 6210, 6300, 6310, 6500, 6500L, 6510< li>
  • Compatible with John Deere Construction & industrial models 310C, 310D, 315C, 315D, 340D, 344E, 344G, 410C, 410D, 444E, 444G, 450E, 450G, 455E, 455G, 490D, 490E, 493D, 495D, 510B, 510C, 515B, 550A, 550B, 550G, 555A, 555B, 555G, 590D, 595D, 610B, 610C, 650G< li>
  • Compatible with John Deere Engine(s) 3029T, 4039T, 4045, 4239T, 4276< li>
  • Replaces John Deere OEM number R56188, R124230< li> < UL> (Part No: 176697)
$11.00
Piston Pin Bushing -
  • For John Deere tractor models 1010, 1020, 2010, 2020, 2510, 2520< li> < UL> (Part No: 180092)
$23.50
Piston Rings - Ring set for 3 ring piston~ 1 used per piston. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. Compression Rings 1 at .125 inches, 1 at .094 inches. Oil Rins 1 at .140 inch. Used on John Deere 3, 4 and 6 cylinder engines: 3029, 3029T, 3179, 4039, 4045, 4045T, 4239A, 4239D, 4239T, 4276, 6059, 6059T, 6068D, 6068H, 6068T, 6359A, 6359T, 6414D, 6414T Replaces RE15674, RE48818, RE516267, RE66820, RE507852 (Part No: 120925)		$15.99
Piston Rings - Piston Ring Set for 2 pistons. Order quantity of 2 for a four cylinder Diesel engine. For 2010, 40, 45 combine. For 3 7 8 bore, 3 compression at 3 32 and 1 oil at 3 16 for each cylinder. (Part No: 128968)$65.00
Piston Rings - Piston Ring Set for 2 pistons. Order quantity of 2 for a four cylinder diesel engine. For 2010, 40, 45 combine, all with 165 CID Engine. (Part No: 128968)$65.00
Piston Rings -
  • For John Deere tractor models 1020, 2020, 2510, 2520, 4030< li>
  • Compatible with John Deere Combine(s) 3300, 6600< li>
  • Compatible with John Deere Construction & industrial models 300, 350, 400, 410, 450, 480, 544< li>
  • Replaces John Deere OEM number PR101, PRS442, PRS443, PRS444, PRS445, PRS446< li> < UL> (Part No: 176679)
$34.00
Piston Rings .045 - Piston Ring Set. 1 required for complete engine. 0.045 OVERBORE, standard bore size 5.5", 4 compression rings at .186 inch, 1 oil ring @.3105 inch on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-45)$157.31
Piston Rings .090 - Piston Rings Set. 1 required for complete engine. 0.090 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: 120988)$194.00
Piston Ring Set - Ring set for 5 ring piston, 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. TISCO supplies 4-1 4 standard bore, 5 ring piston. For 3010, 3020 (Part No: PRS431)$37.02
Piston Ring Set - Ring set for 4 ring piston, 1 used per engine. For 3020 gas, 4 cylinder 227 CID, to SN# 122999. Use with block numbers R33190 & R40840 only. TISCO supplies 4-1 4 standard bore 4 ring piston. For 3020 (Part No: PRS432)$58.36
Piston Ring Set - Ring set for 4 ring piston, 1 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1 4 standard bore 4 ring piston. For 4020 (Part No: PRS434)$75.93
Piston Ring Set - Ring set for 5 ring piston, 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Also SN# 123000 & up. Sleeves and 5 ring pistons & rings, pins & retainers, for 4-1 4 bore. For 3010, 3020 (Part No: PRS436)$97.68
Piston Ring Set - This Ring Set is for the Diesel Engine using a 5 ring piston with a 4 1 4 inch bore. Verify each ring thickness using 3 compression at 3 32 of an inch and 2 oil at 1 4 inch. This is a complete kit for 1 engine. For 4010 diesel, 6 cylinder 381 CID. Not used with block number R40930. (Part No: PRS441)$152.27
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 1020 gas, 3 cylinder 135 CID. To engine SN# 162078. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: PRS442)$69.57
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 1020 gas, 3 cylinder 135 CID. To engine SN# 162079 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: PRS443)$112.81
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 2520 (Part No: PRS446)$97.12
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 1020 diesel, 3 cylinder 152 CID. To engine SN# 154765. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: PRS447)$73.61
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 1020 diesel, 3 cylinder 152 CID. Engine SN# 154766 & up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020 (Part No: PRS448)$73.61
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 1520 diesel, 3 cylinder 164 CID. Engine SN# 160310 & up. TISCO supplies 4.02 standard bore 3 ring piston, Keystone top compression ring. For 1520 (Part No: PRS449)$107.56
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 164 CID 3 cylinder, diesel engine serial number 178601 to 179600 only. 4.02 standard bore~ keystone top compression ring. For 1530 (Part No: PRS450)$107.56
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 2520 diesel, 4 cylinder 219 CID. Engine SN# 157576 & up. TISCO supplies 4.02 standard bore 3 ring piston, Keystone top compression ring. For 2030, 2520 (Part No: PRS453)$143.41
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 219 CID 4 cylinder, diesel engine serial number 211700 to 275484. 4.02 standard bore~ keystone top compression ring. For 2030 (Part No: PRS454)$143.41
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 329 CID 6 cylinder, diesel engine to serial number 277549. 4.02 standard bore~ keystone top compression ring. For 4030 (Part No: PRS455)$198.10
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 4040, 4230 (Part No: PRS456)$268.78
Piston Ring Set - For tractor models 4320, 4520. (Part No: PRS457)$317.53
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 404 CID 6 cylinder turbo diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. Used on tractors 4430, 4630. For 4430, 4630 (Part No: PRS458)$317.02
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 466 CID 6 cylinder turbo diesel engine to serial number 241468, to short block serial number 572026 with connecting rod marked R57303 or R67320. 4.56 standard bore, 3 ring piston, keystone top compressio For 8430 (Part No: PRS460)$309.51
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. 4-1 4 standard bore, 3 ring piston, Keystone top compression ring. 1 at 1 8 Keystone, 1 at 3 32, 1 at 1 4. For 3010, 3020. This kit contains four AR55630 ring sets. (Part No: PRS470)		$87.49
Piston Ring Set - This Ring Set is for the Diesel Engine using a 3 ring piston with a 4 1 4 inch bore. Verify each ring thickness using 1 keyston compression at 1 8 of an inch, 1 compression at 1 32 of an inch and 2 oil at 1 4 inch. This is a complete kit for 1 engine. For 4010 diesel, 6 cylinder 381 CID with block number R40930. (Part No: PRS471)$223.97
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. 164 CID 3 cylinder diesel non-turbo engine to serial number 349999~4.02 standard bore. For standard compression engines with pistons marked B, 3 ring piston. For 1530, 2040 (Part No: PRS475)$107.56
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 219 CID 4 cyl. diesel engine~ 4.016 standard bore. 3 ring piston, keystone top compression ring. Top ring 1 8 inch Keystone 2nd Ring 1- 3 32 inch Compression Oil 5mm. For 2030, 2440 Replaces AR55762, AT29213, R55359, T26147 (Part No: PRS476)$71.10
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277550 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For tractor models 2840, 4030. (Part No: PRS477)$215.11
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 359 CID 6 cylinder non-turbo diesel engine~ 4.19 inch standard bore. Standard compression engines with pistons marked B, 3 ring piston. For model 2940. (Part No: PRSD465)$204.52
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. 179 CID 3 cyl. diesel non-turbo engine serial number 350000 and up~4.19 standard bore. For standard compression engines with pistons marked B, 3 ring piston. Used on tractors 2040, 2240. For 2040, 2240 (Part No: PRSD478)$102.26
Piston Ring Set - 2 cylinders, 4-1 2" bore, 6 compression rings at 3 32", 2 oil rings 1 4". For tractor models 420, 430, 440. (Part No: 130020)$89.00
Piston Ring Set - 2 cylinders, 3-9 16" bore, 4 compression rings 1 8", 2 oil rings 1 8", 2 oil rings 1 4". For tractor models H, HN, HNH, HWH. (Part No: 120995)$58.00
Piston Ring Set - For model L with NXB Hercules engine. (Part No: 130070)$72.00
Piston Ring Set - 6-1 8" bore diameter, 8 compression rings 1 4", 2 oil rings 1 4". For tractor models G, GH, GM, GN, GW. (Part No: 130069)$264.90
Piston Ring Set - 5-1 2" bore diameter, 8 compression rings 1 8", 4 oil rings 1 4". For tractor models 620, 620H, 620S, 6200, 630, 630H, 630S. (Part No: 129204)$171.00
Piston Ring Set - Set for 1 engine. Used on engines with 3 Compression rings and 2 Oil Ring at 1 4 inch each, on each piston. For tractor models A, AO, AR. (Part No: 129032)$178.00
Piston Ring Set - 3-5 8 inch bore, 12 compression rings 3 32 inch, 4 oil rings 3 16 inch. For 2010 with 145 CID Gas. (Part No: 174451)$98.00
Piston Ring Set - For M gas, 40 gas, 320 gas, 330 gas, 2 Cyl, 100 CID 4 inch bore WITH 4 RING PISTON, 3 COMPRESSION RINGS AT 3 32 AND 1 OIL AT 1 4 Inch. Piston ring set complete one set used per cylinder. Due to the several different original pistons that came out on these tractors, the ring configuration and sizes of each ring is required information to ensure you get the correct set. (Part No: 184571)$71.00
Piston Ring Set - For 1010 Gas, 4 cylinder, 115 CID, 3-1 2 inch bore. Piston ring set 1 used per engine. Each cylinder has (3) 3 32 inch rings and (1) 3 16 inch ring. (Part No: 174369)		$73.00
Piston Ring Set - Complete for one engine for model 70. Available in Standard, .045, .090, .125. If ordering on-line comment the size required in the comments section of the order form (Part No: 130002)$202.00
Piston Ring Set -
  • For John Deere tractor model 4520 (Turbo w Sleeve Kits Napa Kit# WSA489)< li>
  • Ring Dia: 4- 1 4 ", Comp Ring: 6 - 5 32 " 6 - 3 32 ", Oil Ring: 6 - 3 16 "< li>
  • Top Groove Size: 5 32 "< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Deg< li>
  • 2nd Groove Size: 3 32 "< li>
  • 2nd Groove Style: Reverse Toesional Taper Face< li>
  • 3rd Groove Size: 3 16 "< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li> < UL> (Part No: 129050)
$395.00
Piston Ring Set -
  • For John Deere tractor models B (s n 59999-earlier, With 2-Cylinder Gas Engine), BO (s n 328999-earlier, With 149 2-Cylinder Gas Engine), BR (s n 328999-earlier, With 149 2-Cylinder Gas Engine)< li>
  • 4-1 4" + .030" with 4-3 16" Compression and 4-3 16" Oil< li> < UL> (Part No: 167088)
$71.00
Piston RIng Set - Piston Ring Set For two M&W Sleeve Pistons #AP140, 6" bore. Set contains: (6) 1 8", (2) 3 16, and 2 1 4 in rings. Made by Hastings. (Part No: 129010)$390.00
Piston Ring Set - .040" Oversize - 2 Cylinder -
  • For John Deere tractor models 620, 630< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • This is a custom made set that requires a 4 week lead time < li>
  • Standard Bore: 5.500"< li>
  • Ring Size: .040" Oversize< li>
  • Compression Rings per Piston: (3) @ .125" < li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 128999< li> < UL> (Part No: 129123)
$164.00
Piston Ring Set - .040" Oversize - Single Cylinder Set -
  • For John Deere tractor models 1010 (s n 41999-earlier), 2010< li>
  • Compatible with John Deere Engine(s) 145 (gas) < li>
  • Compatible with Minneapolis Moline tractor models Jet Star, Jet Star 2, Jet Star 3, JET STAR 3 SUPER, 4 Star, 445 (all gas)< li>
  • Compatible with Minneapolis Moline Engine(s) 206 < li>
  • Compatible with Oliver tractor models Super 55, Super 66, 66, 550, 660 (all gas diesel) < li>
  • Compatible with Waukesha Engine(s) G155 < li>
  • Compatible with White tractor models 2-44 (gas diesel)< li>
  • Standard Bore: 3.625"< li>
  • Ring Size: .040" Oversize< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • For .030" use Item #: 174451< li> < UL> (Part No: 129144)
$24.50
Piston Ring Set, .045 - For 420, 430, 440 (flat head Piston), all gas engine, 2 cylinder, 113 CID with 4 1 4 inch bore. Complete for 1 engine, Piston Ring Set.045 overbore. (Part No: 129159)$89.00
Piston Ring Set, .045 Overbore - For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".045 oversize. For pistons that use: 4 compression rings at 3 16 inch and 1 oil ring at 5 16 inch. Complete set for 1 engine. (Part No: R2030R)$130.36
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models A, AO, AR, 60 (all gas)< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 5.500"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (3) @ .250"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .250"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .250"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Spacer Chrome Rail Oil Inner Spring< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129032< li> < UL> (Part No: 129126)
$178.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models 50, 520, 530< li>
  • Compatible with John Deere Engine(s) 190 (gas)< li>
  • Standard Bore: 4.6875" < li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (4) @ .125" < li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125" < li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set < li>
  • For standard use Item #: 130001< li> < UL> (Part No: 129145)
$157.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor model 70< li>
  • Compatible with John Deere Engine(s) 380 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 5.875"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129148< li> < UL> (Part No: 129146)
$186.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models M, MC, MT, 40, 320, 330< li>
  • Compatible with John Deere Engine(s) 100 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< B>< li>
  • Standard Bore: 4.000" < li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129151< li> < UL> (Part No: 129149)
$74.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models 70, 720, 730< li>
  • Replaces John Deere OEM number AF2225R< li>
  • Fits John Deere Engine(s) 376 (diesel)< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129158< li> < UL> (Part No: 129156)
$220.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models B (s n 60000-95999), BO (s n 329000-337514), BR (s n 329000-337514)< li>
  • Compatible with John Deere Engine(s) 175 (gas)< li>
  • Replaces John Deere OEM number AB3727R< li>
  • Standard Bore: 4.500"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (3) @ .188"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .188"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .188"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129168< li> < UL> (Part No: 129167)
$96.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models G, 70 (all gas)< li>
  • Replaces John Deere OEM number AF764R< li>
  • Fits John Deere Engine(s) 380, 413 (both gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (4) @ .250"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .250"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .250"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129177< li> < UL> (Part No: 129175)
$228.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models 620, 630 (both gas)< li>
  • Compatible with John Deere Engine(s) 303 (gas)< li>
  • Replaces John Deere OEM number AA6820R< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 5.500"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome Compression< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • 5th Groove Size: .125"< li>
  • 5th Groove Style: Torsional< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129207< li> < UL> (Part No: 129205)
$171.00
Piston Ring Set, .090 - For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".090 oversize. For pistons that use: 4 compression rings at 3 16 inch and 1 oil ring at 5 16 inch. Complete set for 1 engine. (Part No: 129106)$150.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor model 70< li>
  • Compatible with John Deere Engine(s) 380 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 5.875"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129148< li> < UL> (Part No: 129147)
$186.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models M, MC, MT, 40, 320, 330< li>
  • Compatible with John Deere Engine(s) 100 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< B>< li>
  • Standard Bore: 4.000" < li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129151< li> < UL> (Part No: 129150)
$74.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models 70, 720, 730< li>
  • Fits John Deere Engine(s) 376 (diesel)< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129158< li> < UL> (Part No: 129157)
$220.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models 420, 430, 440, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 113 (gas), 227 (gas), 341 (gas)< li>
  • Standard Bore: 4.250" < li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (3) @ .094" < li>
  • Oil Rings per Piston: (1) @ .250" < li>
  • Top Groove Size: 3 32"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: 3 32"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: 3 32"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: 1 4"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a 2 cylinder set< li>
  • For standard use Item #: 129161< li> < UL> (Part No: 129160)
$89.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models 70, 720, 730< li>
  • Fits John Deere Engine(s) 376 (diesel)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (1) @ .156" & (3) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .156"< li>
  • Top Groove Style: Keystone Torsional 20 Degree< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li> < UL> (Part No: 129163)
$385.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models B (s n 96000-200999), BO (s n 329000-337514), BR (s n 329000-337514)< li>
  • Compatible with John Deere Engine(s) 175 (gas)< li>
  • Standard Bore: 4.500"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (3) @ .188"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .188"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .188"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129167< li> < UL> (Part No: 129168)
$96.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models G, 70 (all gas)< li>
  • Fits John Deere Engine(s) 380, 413 (both gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (4) @ .250"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .250"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .250"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129177< li> < UL> (Part No: 129176)
$265.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models 620, 630 (both gas)< li>
  • Compatible with John Deere Engine(s) 303 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< B>< li>
  • Standard Bore: 5.500"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome Compression< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • 5th Groove Size: .125"< li>
  • 5th Groove Style: Torsional< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129207< li> < UL> (Part No: 129206)
$171.00
Piston Ring Set, 100 CID Gas - RING SET For 4.000" bore pistons, each piston uses: (2) 5 32" compression and (1) 1 8" compression ring and (1)1 4" oil ring. This ring set covers TWO CYLINDERS. Fits 40, 40 crawler, M, MC, MI, MT. +++ NOTE: Do not order by tractor model only. Due to the many different piston manufacturers, there can be as many as 8 different ring sets available for one particular engine. To ensure you order the correct rings, we will need the following information: 1.) bore size, 2.) thickness of each ring, 3.) how many of each ring thickness per piston. +++ (Part No: 130055)		$65.90
Piston Ring Set - .120" Oversize - 2 Cylinder -
  • For John Deere tractor model 70< li>
  • Compatible with John Deere Engine(s) 380 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 5.875"< li>
  • Ring Size: .120" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129147< li> < UL> (Part No: 129148)
$186.00
Piston Ring Set - .120" Oversize - 2 Cylinder -
  • For John Deere tractor models M, MC, MT, 40, 320, 330< li>
  • Compatible with John Deere Engine(s) 100 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< B>< li>
  • Standard Bore: 4.000" < li>
  • Ring Size: .120" Oversize< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129150< li> < UL> (Part No: 129151)
$77.00
Piston Ring Set - .120" Oversize - 2 Cylinder -
  • For John Deere tractor models 70, 720, 730< li>
  • Fits John Deere Engine(s) 376 (diesel)< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .120" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129157< li> < UL> (Part No: 129158)
$220.00
Piston Ring Set - .120" Oversize - 2 Cylinder -
  • For John Deere tractor models 420, 430, 440, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 113 (gas), 227 (gas), 341 (gas)< li>
  • Standard Bore: 4.250"< li>
  • Ring Size: .120" Oversize< li>
  • Compression Rings per Piston: (3) @ .094" < li>
  • Oil Rings per Piston: (1) @ .250" < li>
  • Top Groove Size: 3 32" < li>
  • Top Groove Style: Barrel Face Chrome < li>
  • 2nd Groove Size: 3 32"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: 3 32"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: 1 4"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer < li>
  • Sold as a 2 cylinder set< li>
  • For standard use Item #: 129160< li> < UL> (Part No: 129161)
$89.00
Piston Ring Set, .125 Oversize - For model For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".125 oversize.. Piston Rings set for 1 engine fits pistons in rebore kit R1981. (Part No: 129107)$150.00
Piston Ring Set - .125" Oversize - 2 Cylinder -
  • For John Deere tractor models G, 70 (all gas)< li>
  • Fits John Deere Engine(s) 380, 413 (both gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 6.125"< li>
  • Ring Size: .125" Oversize< li>
  • Compression Rings per Piston: (4) @ .250"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .250"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .250"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129176< li> < UL> (Part No: 129177)
$265.00
Piston Ring Set - .125" Oversize - 2 Cylinder -
  • For John Deere tractor models 620, 630 (both gas)< li>
  • Compatible with John Deere Engine(s) 303 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< B>< li>
  • Standard Bore: 5.500"< li>
  • Ring Size: .125" Oversize< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome Compression< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • 5th Groove Size: .125"< li>
  • 5th Groove Style: Torsional< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129206< li> < UL> (Part No: 129207)
$171.00
Piston Ring Set, .25mm - Complete for one piston. .25mm oversize piston rings. For tractor models 650, 750. Replaces CH15621 (Part No: 186222)$58.04
Piston Ring Set, .25mm - Oversized, complete for one piston. For tractor models 870, 1070. (Part No: AM877294)$55.75
Piston Ring Set, .25mm - Oversized, complete for one piston. For tractor models 770, 970. (Part No: AM875394)$58.38
Piston Ring Set - 4.1875" Overbore - 2 Cylinder -
  • For John Deere tractor models 3010, 4010< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Compatible with John Deere Engine(s) 201 (gas), 301 (gas)< li>
  • Overbore: 4.1875"< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a 2 cylinder set< li> < UL> (Part No: 129057)
$95.00
Piston Ring Set, .50mm - Complete for one piston .50mm oversized ring set. For tractor models 650, 750. (Part No: RS-520B)$53.46
Piston Ring Set, .50mm - Oversized, complete for one piston. For tractor models 870, 1070. (Part No: AM878245)$55.75
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models 3010, 4010< li>
  • Compatible with John Deere Engine(s) 254 (diesel, original block s n 49999-earlier), 381 (diesel, original block s n 64999-earlier)< li>
  • Bore: 4.125"< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a 2 cylinder set< li> < UL> (Part No: 128964)
$131.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models 620, 630< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • This is a custom made set that requires a 4 week lead time < li>
  • Bore: 5.500"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125" < li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250" < li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil < li>
  • Sold as a complete 2 cylinder set < li>
  • For .040" use Item #: 129123< li> < UL> (Part No: 128999)
$164.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models 3010, 4010< li>
  • Compatible with John Deere Engine(s) 254 (diesel), 381 (diesel)< li>
  • Bore: 4.125"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome. Machined for .030" Groove insert, install GL spacer packed with set< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chromed Cast Iron Coiled Spring< li>
  • Sold as a 2 cylinder set< li> < UL> (Part No: 129018)
$174.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4230< li>
  • Compatible with John Deere Combine(s) 6602, 7700< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 510, 600< li>
  • Replaces John Deere OEM number AR54879< li>
  • Fits John Deere Engine(s) 241, 362 (both gas)< li>
  • Bore: 4.250"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a 2 cylinder set< li> < UL> (Part No: 129042)
$138.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models 50, 520, 530< li>
  • Compatible with John Deere Engine(s) 190 (gas)< li>
  • Bore: 4.6875"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set < li>
  • For .045" use Item #: 129145< li> < UL> (Part No: 130001)
$157.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models M, MC, MT, 40, 320, 330< li>
  • Compatible with John Deere Engine(s) 100 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< B>< li>
  • Bore: 4.000"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete 2 cylinder set< li>
  • For .040" use Item #: 129151< li> < UL> (Part No: 130006)
$68.60
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models 70, 720, 730< li>
  • Replaces John Deere OEM number AF2224R< li>
  • Fits John Deere Engine(s) 376 (diesel)< li>
  • Bore: 6.125"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (4) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil Inner Spring< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For .045" use Item #: 129158< li> < UL> (Part No: 130019)
$220.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models B (s n 60000-95999), BO (s n 329000-337514), BR (s n 329000-337514)< li>
  • Compatible with John Deere Engine(s) 175 (gas)< li>
  • Replaces John Deere OEM number AB3982R< li>
  • Bore: 4.500"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .188"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .188"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .188"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For .045" use Item #: 129168< li> < UL> (Part No: 130039)
$96.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor model R< li>
  • Fits John Deere Engine(s) 416 (2 cylinder diesel)< li>
  • Bore: 5.750"< li>
  • Compression Rings per Piston: (5) @ .125"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .125"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .125"< li>
  • 4th Groove Style: Torsional< li>
  • 5th Groove Size: .125"< li>
  • 5th Groove Style: Torsional< li>
  • 6th Groove Size: .250"< li>
  • 6th Groove Style: Spacer Chrome Rail Oil Inner Spring< li>
  • 7th Groove Style: .250"< li>
  • 7th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li> < UL> (Part No: 130061)
$335.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor model LA< li>
  • Compatible with John Deere Combine(s) 12A< li>
  • Bore: 3.500"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .125"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .125"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete 2 cylinder set< li> < UL> (Part No: 130071)
$52.90
Piston Ring Set - Standard - 3 Cylinder -
  • For John Deere tractor models 2240, 2940< li>
  • Bore: 4.193"< li>
  • Compression Rings per Piston: (1) @ .118" & (1) @ .093"< li>
  • Oil Rings per Piston: (1) @ .138"< li>
  • Top Groove Size: .118"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .093"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .138"< li>
  • 3rd Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 3 cylinder set< li> < UL> (Part No: 128924)
$174.00
Piston Ring Set - Standard - 3 Cylinder -
  • For John Deere tractor models 1520, 1530, 2040, 4030< li>
  • Compatible with John Deere Engine(s) 165 (requires 1 set), 6329D (requires 2 sets)< li>
  • Bore: 4.016"< li>
  • Compression Rings per Piston: (1) @ .125" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .197"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .197"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold as a 3 cylinder set< li> < UL> (Part No: 129027)
$220.00
Piston Ring Set - Standard - 4 Cylinder -
  • For John Deere tractor models 2630, 2640< li>
  • Bore: 4.193"< li>
  • Compression Rings per Piston: (1) @ .118" & (1) @ .093"< li>
  • Oil Rings per Piston: (1) @ .138"< li>
  • Top Groove Size: .118"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .093"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .138"< li>
  • 3rd Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 4 cylinder set< li> < UL> (Part No: 128914)
$216.00
Piston Ring Set - Standard - 4 Cylinder -
  • For John Deere tractor models 2440, 2520< li>
  • Compatible with John Deere Engine(s) 4219 (diesel)< li>
  • Bore: 4.016"< li>
  • Compression Rings per Piston: (1) @ .125" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .197"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .197"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold as a complete 4 cylinder set< li> < UL> (Part No: 128925)
$285.00
Piston Ring Set - Standard - 6 Cylinder -
  • For John Deere tractor model 4230< li>
  • Compatible with John Deere Engine(s) 6404D< li>
  • Bore: 4.250"< li>
  • Compression Rings per Piston: (1) @ .125" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Torsional Plasma< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold as a complete 6 cylinder set< li> < UL> (Part No: 129055)
$480.00
Piston Ring Set - Standard - 6 Cylinder Set -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 700, 700A, 760, 760A< li>
  • Compatible with John Deere Engine(s) 6531 (diesel)< li>
  • Replaces John Deere OEM number AR41295< li>
  • Bore: 4.750"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (1) @ .156" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .156"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Barrel Face Chrome< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold as 6 Cylinder Piston Ring Set< li>
  • Piston Ring Set - Standard - Single Cylinder use Item #: 120949< li> < UL> (Part No: 174366)
$280.00
Piston Ring Set - Standard - 6 Cylinder Set -
  • For John Deere tractor models 4320, 4430, 4520, 4620, 4630, 7020< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 7700< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460< li>
  • Compatible with John Deere Construction & industrial models 644A, 646, 646B, 690, 690A, 690B, 693B, 740< li>
  • Compatible with John Deere Engine(s) 6404A, 6404T< li>
  • Replaces John Deere OEM number AR51741< li>
  • Bore: 4.250"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .156"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .156"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .156"< li>
  • 2nd Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold as 6 Cylinder Piston Ring Set< li>
  • Piston Ring Set - Standard - Single Cylinder use Item #: 120943< li> < UL> (Part No: 174367)
$228.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 1120, 1520, 2030, 2120, 2520< li>
  • Compatible with John Deere Combine(s) 3300, 6600< li>
  • Compatible with John Deere Harvester(s) 482, 499, 699< li>
  • Compatible with John Deere Construction & industrial models 302, 302A, 310, 401B, 401C, 410, 440A, 480B< li>
  • Compatible with John Deere Engine(s) 164, 219, 4219, 6329D< li>
  • Replaces John Deere OEM number AR55760< li>
  • Bore: 4.0157"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .197"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .197"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold per cylinder< li> < UL> (Part No: 120922)
$53.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 1520, 1530, 2030, 2040, 2440, 2520, 2840, 4030< li>
  • Compatible with John Deere Construction & industrial models 302, 302A, 310, 310A, 310B, 350C, 401A, 401B, 401C, 401D, 410, 410B, 440A, 440B, 444, 444C, 450A, 450B, 450C, 450D, 455D, 480A, 480B, 480C, 540A, 544A, 570A, 710B< li>
  • Compatible with John Deere Engine(s) 164, 219, 4219, 4219T, 6329D< li>
  • Replaces John Deere OEM number AR55759, AR55762, AT29213, PRS449, PRS450, PRS453, PRS454, PRS455, PRS475, PRS476, PRS477, T26147, VPB4911, AR19213< li>
  • Bore: 4.0157"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (1) @ .125" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .197"< li>
  • Top Groove Size: .125"< li>
  • 2nd Groove Size: .094"< li>
  • 3rd Groove Size: .197"< li>
  • Sold per cylinder< li> < UL> (Part No: 120923)
$27.26
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 3010, 3020 (s n 123000-later), 4000, 4010, 4020 (s n 201000-later), 4040, 4230< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 7700< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 510, 600 (s n 201000-later)< li>
  • Compatible with John Deere Engine(s) 254 (diesel), 270 (diesel), 381 (diesel), 404 (diesel)< li>
  • Replaces John Deere OEM number AR65502< li>
  • Bore: 4.250"< li>
  • Ring Size: Standard< li>
  • Top Groove Size: .125"< li>
  • 2nd Groove Size: .094"< li>
  • 3rd Groove Size: .188"< li>
  • Sold per cylinder< li> < UL> (Part No: 120936)
$34.26
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 4050 (s n 6509-earlier), 4240< li>
  • Compatible with John Deere Combine(s) 6620< li>
  • Compatible with John Deere Engine(s) 6466D< li>
  • Replaces John Deere OEM number AR87753< li>
  • Bore: 4.5625"< li>
  • Ring Size: Standard< li>
  • Top Groove Size: .156"< li>
  • 2nd Groove Size: .094"< li>
  • 3rd Groove Size: .188"< li>
  • Sold per cylinder< li> < UL> (Part No: 120937)
$45.76
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 7700, 7800, 8100, 8200, 8300, 8570< li>
  • Compatible with John Deere Combine(s) CTS, 9500, 9600< li>
  • Compatible with John Deere Harvester(s) 6610, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 644E, 644ER, 644G, 740E, 740G, 748E, 748G, 770B, 770BH, 772B, 772BH, 850C, 892ELC< li>
  • Compatible with John Deere Engine(s) 6076A (diesel), 6076T (diesel)< li>
  • Replaces John Deere OEM number RE57517< li>
  • Bore: 4.5625"< li>
  • Ring Size: Standard< li>
  • Top Groove Size: .156"< li>
  • 2nd Groove Size: .156"< li>
  • 3rd Groove Size: .156"< li>
  • Sold per cylinder< li> < UL> (Part No: 120938)
$54.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 4250, 4440, 4450, 4640, 4650, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 646C, 690C, 693C, 740A, 743, 743A, 762A, 762B, 770A, 772A, 790, 790D, 792, 850B< li>
  • Compatible with John Deere Engine(s) 6076T (turbo diesel), 6466T (turbo diesel)< li>
  • Replaces John Deere OEM number RE48380< li>
  • Bore: 4.5625"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .156"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .156"< li>
  • 2nd Groove Size: .156"< li>
  • 3rd Groove Size: .188"< li>
  • Sold per cylinder< li> < UL> (Part No: 120942)
$48.76
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 4320, 4430, 4520, 4620, 4630, 7020< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 7700< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460< li>
  • Compatible with John Deere Construction & industrial models 644A, 646, 646B, 690, 690A, 690B, 693B, 740< li>
  • Compatible with John Deere Engine(s) 6404A, 6404T< li>
  • Replaces John Deere OEM number AR51741< li>
  • Bore: 4.250"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .156"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .156"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .156"< li>
  • 2nd Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring < li>
  • Sold per cylinder< li>
  • Piston Ring Set - Standard - 6 Cylinder use Item #: 174367< li> < UL> (Part No: 120943)
$43.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 700, 700A, 760, 760A< li>
  • Compatible with John Deere Engine(s) 6531 (diesel)< li>
  • Replaces John Deere OEM number AR41295< li>
  • Bore: 4.750"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (1) @ .156" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .156"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Barrel Face Chrome< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring < li>
  • Sold per cylinder< li>
  • Piston Ring Set - Standard - 6 Cylinder use Item #: 174366< li> < UL> (Part No: 120949)
$58.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 5105, 5205, 5210, 5220, 5310, 5320, 5410, 5415, 5420, 5510, 5520, 5615, 5715< li>
  • Compatible with John Deere Construction & industrial models 210LE, 240, 250, 260, 270, 310E, 310SE, 315SE, 344H, 410E, 450H, 485E, 486E, 488E, 550H, 650H< li>
  • Compatible with John Deere Engine(s) 3029 (PowerTech Diesel), 3029T (PowerTech Turbo Diesel), 4045 (PowerTech Diesel), 4045T (PowerTech Turbo Diesel)< li>
  • Replaces John Deere OEM number RE66271< li>
  • Bore: 4.1929"< li>
  • Piston Number(s) RE59277, RE505100< li>
  • Ring Size: Standard< li>
  • Top Groove Size: .094"< li>
  • 2nd Groove Size: .094"< li>
  • 3rd Groove Size: .140"< li>
  • Sold per cylinder< li> < UL> (Part No: 120950)
$34.26
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 6030, 7520< li>
  • Compatible with John Deere Harvester(s) 5400< li>
  • Compatible with John Deere Construction & industrial models 644B, 646B, 770, 770A, 772A< li>
  • Compatible with John Deere Engine(s) 6531A, 6531T< li>
  • Replaces John Deere OEM number AR53226< li>
  • Bore: 4.750"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .156"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .156"< li>
  • 2nd Groove Size: .156"< li>
  • 3rd Groove Size: .188"< li>
  • Sold per cylinder< li> < UL> (Part No: 120955)
$67.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 7710, 7810, 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T, 9100< li>
  • Compatible with John Deere Construction & industrial models 644H, 770C, 770CH, 772CH, 848G< li>
  • Compatible with John Deere Engine(s) 6081 (PowerTech Diesel), 6081H (PowerTech Diesel), 6081T (PowerTech Diesel)< li>
  • Replaces John Deere OEM number RE503528< li>
  • Bore: 4.5625"< li>
  • Ring Size: Standard< li>
  • Top Groove Size: .147"< li>
  • 2nd Groove Size: .121"< li>
  • 3rd Groove Size: .156"< li>
  • Sold per cylinder< li> < UL> (Part No: 120984)
$70.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 8630, 8640, 8650, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5460, 5820, 5830, 6710< li>
  • Compatible with John Deere Construction & industrial models 450LC, 744E, 762, 850, 855, 860B, 862, 862B, 890, 890A, 992ELC< li>
  • Compatible with John Deere Engine(s) 6101A (diesel), 6101H (diesel), 6619A (diesel), 6619T (diesel)< li>
  • Replaces John Deere OEM number AR82355< li>
  • Bore: 5.125"< li>
  • Ring Size: Standard< li>
  • Top Groove Size: .156"< li>
  • 2nd Groove Size: .156"< li>
  • 3rd Groove Size: .188"< li>
  • Sold per cylinder< li> < UL> (Part No: 120985)
$51.80
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor model 2010< li>
  • Compatible with John Deere Combine(s) 45, 55, 95< li>
  • Compatible with John Deere Engine(s) 165 (diesel) < li>
  • Compatible with Minneapolis Moline tractor model G750, G850, G940, G950 < li>
  • Compatible with Oliver tractor model 1650, 1655, 1750, 1755, 1800, 1850, 1855 < li>
  • Compatible with Waukesha Engine(s) D310 (diesel), G283 (gas), G310 (gas) < li>
  • Compatible with White tractor model 2-70, 2-78< li>
  • Bore: 3.875"< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • Piston Ring Set - Standard - 6 Cylinder use Item #: 174402< li> < UL> (Part No: 121062)
$23.00
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor model 1010< li>
  • Compatible with John Deere Engine(s) 145 (diesel)< li>
  • Replaces John Deere OEM number AT17693< li>
  • Bore: 3.625"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold per cylinder< li> < UL> (Part No: 128989)
$41.26
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (all diesel)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510 (all diesel)< li>
  • Compatible with John Deere Engine(s) 254, 270, 381, 404 (all diesel)< li>
  • Replaces John Deere OEM number AR55630< li>
  • Bore: 4.250"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (1) @ .125" & (1) @ .094"< li>
  • Oil Rings per Piston: (1) @ .250"< li>
  • Top Groove Size: .125"< li>
  • Top Groove Style: Keystone Torsional Chrome 15 Degree< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Chromed Cast Iron oil Coiled Spring< li>
  • Sold per cylinder< li> < UL> (Part No: 129022)
$24.20
Piston Ring Set - Standard - Single Cylinder -
  • For John Deere tractor models 1010 (s n 41999-earlier), 2010< li>
  • Compatible with John Deere Engine(s) 145 (gas) < li>
  • Compatible with Minneapolis Moline tractor models Jet Star, Jet Star 2, Jet Star 3, JET STAR 3 SUPER, 4 Star, 445 (all gas)< li>
  • Compatible with Minneapolis Moline Engine(s) 206 < li>
  • Compatible with Oliver tractor models Super 55, Super 66, 66, 550, 660 (all gas diesel) < li>
  • Compatible with Waukesha Engine(s) G155 < li>
  • Compatible with White tractor models 2-44 (gas diesel)< li>
  • Bore: 3.625"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete single cylinder set< li>
  • Piston Ring Set - Standard - 6 Cylinder use Item #: 174451< li> < UL> (Part No: 174449)
$25.50
Piston Ring Set - Standard - Single Cylinder Set -
  • For John Deere tractor models 3020 (s n 123000-later), 4000, 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A (s n 123113-later), 500B, 500C, 510, 600 (s n 200999-earlier)< li>
  • Compatible with John Deere Engine(s) 270 (diesel), 404 (diesel)< li>
  • Bore: 4.250"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .094"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .094"< li>
  • 3rd Groove Style: Reverse Torsional Taper Face< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Chrome Rail Oil Ring Spacer< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold per cylinder< li> < UL> (Part No: 129011)
$47.76
Piston Ring Set, Std - Complete for one piston 80mm. For tractor models 650, 750. (Part No: CH15608)$52.89
Piston Ring Set, Std - Set for 1 piston, 90mm. For model 950. (Part No: 184533)$49.96
Piston Ring Set, Std - Complete for one piston. For tractor models 870, 1070. (Part No: AM877273)$58.02
Piston Ring Set, Std - Complete for one piston. For tractor models 770, 970. (Part No: AM875390)$47.32
Piston Ring Set, Std - Out of Production. 6-3 4" dia. with qty 6, 1 4" compression rings and qty 4, 1 4" oil rings. (Part No: 128993)$275.00
Piston Rings, Std - This piston ring set is for 1 hole (1 piston) 80mm. For model 850. (Part No: CH12046)$27.96
Piston Rings, STD - Piston Ring Set, Complete for 1 engine. 321 CID Gas engine STANDARD 5.5 inch bore, 4 compression rings at .186", 1 oil ring at .3105". Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: 130038)$164.00
Piston with Pin -
  • For John Deere tractor models 6400, 6400L, 6500, 6500L, 6800, 6900, 7400, 7410, 7500, 7600, 9400< li>
  • Compatible with John Deere Construction & industrial models 340D, 344G, 410C, 410D, 440C, 444E, 444G, 448D, 450E, 450G, 455E, 455G, 490E, 495D, 510C, 540D, 544B, 544C, 544D, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 590D, 595, 595D, 610B, 610C, 624E, 624G, 640, 640D, 643, 643D, 648D, 650G, 655B, 670A, 670B, 672A, 672B, 690D, 693D, 750, 750B, 755, 755A, 755B< li>
  • Replaces John Deere OEM number RE48469< li> < UL> (Part No: 168507)
$101.00
Ring Set - This ring set is for 4 inch standard bore. Contains 6- 3 32" Compression rings and 4- 1 4" Oil Rings. Two sets are needed for a John Deere 3010 with a 201 4-Cylinder Gas Engine. Three sets are needed for a John Deere 4010 with a 301 6-Cylinder Gas Engine. (Part No: 128965)$88.00
Ring Set - For B, BN gas SN# 201000 UP, 50 gas, 2 Cyl, 190 CID 4-11 16" bore. Set for one engine. Each piston contains 4 compression 3 16, 1 Oil 5 16. (Part No: 128898)$150.00
Ring Set - For 420 gas, 430 gas, 440 (Flathead Piston) gas, 2 Cyl, 113 CID 4-1 4" bore 3 compression at 3 32, 1 oil at 1 4. Piston ring set complete one set used per engine. (Part No: 130020)$89.00
 
Exhaust System
Adapter - Elbow to Turbo -
  • For John Deere tractor models 1830, 2130, 3130, 3140 (s n 711487-711502), 3350< li>
  • Compatible with John Deere Construction & industrial models 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 448D, 450, 450B, 450C, 540A, 540B, 540D, 544, 544A, 544B, 544C, 544D, 544E, 548D, 570, 570A, 570B, 624E, 624G, 640, 640D, 643, 643D, 648D, 653E (s n 713455-earlier), 710B, 710C, 710D (s n 713822-earlier)< li>
  • Replaces John Deere OEM number R51736, T30200< li> < UL> (Part No: 163567)
$75.00
Adapter Kit - Turbo to Elbow -
  • For John Deere tractor models 4040, 4040S, 4050, 4240, 4240S, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5720, 9940< li>
  • Compatible with John Deere Construction & industrial models 550, 555, 644, 644A, 644B, 646, 646B, 690, 690A, 690B, 740< li>
  • Replaces John Deere OEM number R43724G< li>
  • Turbo to elbow adapter kit with piston ring grooves for a better exhaust seal< li>
  • Piston Rings Included< li>
  • For replacement ring use Item #: 101565< li> < UL> (Part No: 163566)
$93.10
Adapter Pipe - Has 2 bolt flange mounting. 1-7 8". I.D., 2" O.D., overall length 7-1 2". For: 1010 gas, 320, 330, 420 SN# 135025 and up, 430, 440, 435 diesel (1956-1988). Used with AM3101T, AT10646T, AM3246T Mufflers & MC200 clamp. (Part No: 101174)		$24.00
Air Cleaner Stack - With round top for model A up to SN# 476999. (Part No: 126379)		$98.00
Air Cleaner Stack - Chrome -
  • For John Deere tractor models 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 7020< li>
  • Replaces John Deere OEM number R49526< li>
  • 36" Tall< li>
  • 4-1 2" I.D.< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114761)
$121.00
Aspirated Exhaust Stack -
  • For John Deere tractor models 6030, 7020, 7520< li>
  • Inlet I.D.: 4-3 8"< li>
  • 24" Tall< li>
  • Fits On Top Of Original Muffler< li>
  • Black Finish< li> < UL> (Part No: 114754)
$139.70
Aspirator Pipe -
  • For John Deere tractor models 6030, 7520< li>
  • Inlet: Flared To Fit Turbo< li>
  • Oulet O.D.: 5"< li>
  • Includes Aspirator Tube< li>
  • Black< li> < UL> (Part No: 124256)
$240.29
Aspirator Pipe -
  • For John Deere tractor models 8440, 8640< li>
  • Inlet: Flared To Fit Turbo< li>
  • Length: 48"< li>
  • Includes Aspirator Tube< li>
  • Black< li> < UL> (Part No: 124257)
$258.97
Aspirator Pipe -
  • For John Deere tractor models 8430, 8630< li>
  • Inlet: Flared To Fit Turbo< li>
  • Outlet: 5"< li>
  • Length: 48"< li>
  • Includes Aspirator Tube< li>
  • Black< li> < UL> (Part No: 124258)
$252.64
Chrome Curved Exhaust Stack - For Unstyled B. Chrome Curved Exhaust Stack with 3 Bolt Flange. 3 inch O.D., 24 inches long. (Part No: 180700)$249.13
Chrome Curved Exhaust Stack - For Styled B, 50, 520, 530. Chrome Curved Exhaust Stack. (Part No: 115071)		$191.48
Chrome Curved Exhaust Stack - For M, MC, MT, 40, 320.Chrome Curved Exhaust Stack With 2 Bolt Flange. 3 inches O.D. For Body, 18 inches Tall Chrome. 4 inches Tall at Base. Double Walled. (Part No: 179463)		$189.42
Chrome Curved Exhaust Stack - ++ DUPLICATE ++ For R, 80, 820, 830 Chrome Curved Exhaust Stack (Part No: 179523)$203.83
Chrome Curved Exhaust Stack - For tractor models R, 80, 820, 830 Chrome Curved Exhaust Stack. 4 inch OD, 24 inches Tall, Double Wall Lined. 16 Gauge. (Part No: 179523)		$203.83
Chrome Curved Exhaust Stack - For 330, 420, 430, 435, 440 Chrome Curved Exhaust Stack With 2 Bolt Flange, 20 inches long 3 inches OD. (Part No: 179474)		$193.54
Chrome Curved Exhaust Stack 24 Inch - Double Walled, 24" Tall, 2 15 16" Flared I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: 179459)		$277.95
Chrome Curved Stack Exhaust Pipe - This chromed exhaust stack is for Styled A. Chrome Curved Stack Exhaust Pipe with "Dent". (Part No: 179275)		$199.72
Chrome Exhaust Pipe - For Styled A. Straight Chrome Pipe with Dent. 21 inches tall. 3 1 2 Outside Diameter. (Part No: 178670)		$164.27
Chrome Exhaust Pipe - For Unstyled B with 3 bolt flange. Chrome Exhaust Pipe. Straight Pipe. (Part No: 179180)		$197.80
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 118823)		$116.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119038)		$91.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 114858)		$120.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 173286)$112.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 173287)$132.30
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119080)		$170.60
Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 173281)		$82.00
Chrome Stack, Curved - 14", double wall with elbow. For tractor models L, LA, LI. (Part No: 178337)$210.01
Chrome Stack, Curved - 36", double wall, 3-15 16" inlet I.D.. For tractor models (4050 from SN# 5511 and up), 4055, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4650, 4755, 4955, 4840, 4850, 7020. (Part No: 179628)$290.01
Chrome Stack, Curved - Double wall. Measures 36 inches tall, 5 inches outside diameter, 3 5 8 inside diameter and 4 inch base. For tractor models 5010, 5020, 6030. (Part No: 178558)$370.60
Chrome Stack, Curved - 36" double wall, 2-15 16" inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: 179017)		$287.95
Chrome Stack, Straight - 14", double wall with elbow. For tractor models L, LA, LI. (Part No: 178338)$197.66
Chrome Stack, Straight - 36", double wall, 2-15 16" flared inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: 179019)		$302.80
Chrome Stack, Straight - 48", double wall, 2-15 16" inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: 114833)$125.29
Chrome Straight Exhaust Pipe - For Styled B, 50, 520, 530. Chrome Straight Exhaust Pipe, 4 bolt flange. The original pipe has a dent for the steering column. This pipe is skinner than the original and does not need the dent. This pipe is 3 inches outside diameter and 24 inches long. (Part No: 178672)		$174.00
Chrome Straight Exhaust Pipe - For D. Chrome Straight Exhaust Pipe with Elbow. Double Walled with Elbow - 36 inches Tall - 4 inch OD (Part No: 178985)		$391.19
Chrome Straight Exhaust Pipe - Double Wall, Length 18 inches plus a 4 inch base. For M, MT, MC, 40, 320. Chrome Straight Exhaust Pipe Double Walled with 2 Bolt Flange - 22" Tall - 3" OD. (Part No: 178976)		$174.00
Chrome Straight Exhaust Pipe - For tractor models R, 80, 820, 830. 4 inch OD, 24 inches Tall, Double Wall Lined. 16 Gauge. (Part No: 124260)		$197.70
Chrome Straight Exhaust Pipe - For 330, 420, 430, 435, 440 chrome Straight Exhaust Pipe (Part No: 179476)		$187.36
Chrome Straight Exhaust Pipe - Double walled, 24" Tall - 2 15 16" Flared I.D. - 5" O.D.. For 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: 180717)$288.25
Curved Stack - Chrome with Elbow. For model D. (Part No: 178497)		$422.07
Engine EGR Valve -
  • For John Deere tractor models 8130, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8295RT, 8320R, 8320RT, 8330, 8330T, 8345R, 8345RT, 8430, 8430T, 8530, 9230, 9330, 9420R, 9430, 9430T, 9470R, 9520R, 9570R< li>
  • Compatible with John Deere Harvester(s) CP690, 7350, 7380, 7450, 7480, 7550, 7580, 7750, 7760, 7780, 8300, 8400, 8500, 8600< li>
  • Replaces John Deere OEM number RE537144, RE535294< li> < UL> (Part No: 162015)
$345.00
Exhaust Chrome Curved Stack - Chrome For Unstyled A, G, 60, 70, 620, 630, 720, 730. 4 inch outside diameter, 24 inch in length. (Part No: 115068)		$203.83
Exhaust Chrome Straight Pipe - Chrome Pipe is double wall construction with 4 bolt flange is 4" O.D. Length 24". For Unstyled A, G, 60, 70, 620, 630, 720, 730 (Part No: 111268)		$180.00
Exhaust Elbow - For tractor models 4040, 4050, 4240, 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850. (Part No: 101610)		$120.00
Exhaust Elbow - This exhaust elbow if for model 4320. It has a 3.900" Outlet outside diameter. (Part No: 109979)		$108.83
Exhaust Elbow - For tractor models 8630, 8640 both with 619 diesel engine. (Part No: 179524)		$228.02
Exhaust Elbow - For tractor models: 4055, 4255, 4455, 4555, 4755, 4955. (Part No: 110217)$153.00
Exhaust Elbow -
  • For John Deere tractor models 4050, 4250, 4450< li>
  • Compatible with John Deere Construction & industrial models 300D, 310D, 315D, 415B, 515B< li>
  • Compatible with John Deere Hay Cutting(s) 3430, 3830< li>
  • Replaces John Deere OEM number R57270< li> < UL> (Part No: 126895)
$152.00
Exhaust Elbow - This is exhaust elbow for OEM Part Number AD1203R, Bottom Portion of Muffler for a model D. Does not include the muffler, sold separately. (Part No: 179579)		$131.00
Exhaust Elbow - For tractor models 4050, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020. OEM# R56994. (Part No: 101610)$120.00
Exhaust Elbow Pipe -
  • For John Deere tractor models 6520, 6620, 6820, 6920, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number L152948< li> < UL> (Part No: 171468)
$92.00
Exhaust Guard -
  • For John Deere tractor models 6020, 6030, 7020, 7030< li>
  • Replaces John Deere OEM number AL177629< li> < UL> (Part No: 162108)
$79.00
Exhaust / Intake Manifold Gaskets - Gasket set for B3211R manifold (Part No: 101587)$28.50
Exhaust Manifold -
  • For John Deere tractor models 60, 620, 630< li>
  • Replaces John Deere OEM number A5751R, A5751< li> < UL> (Part No: 118736)
$109.00
Exhaust Manifold -
  • For John Deere tractor models 2840 (s n 276826-later), 2940, 2950, 2955, 3030, 3055, 3130, 3140, 3150 (s n 155860-earlier)< li>
  • Replaces John Deere OEM number R65850, R504722< li> < UL> (Part No: 155132)
$236.00
Exhaust Manifold -
  • For John Deere tractor models 3030, 3040, 3055, 3130, 3140, 3255, 4050, 4250, 4450< li>
  • Compatible with John Deere Combine(s) 4435 (Hydro), 9400 (engine s n 701275-earlier)< li>
  • Compatible with John Deere Harvester(s) 7445, 7450, 9920, 9930 (s n 101-2480)< li>
  • Replaces John Deere OEM number CE15515< li> < UL> (Part No: 160646)
$810.00
Exhaust Manifold -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2350, 2355, 2550, 2555< li>
  • Replaces John Deere OEM number R70411< li> < UL> (Part No: 168524)
$455.00
Exhaust Manifold -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6210, 6210L, 6215, 6220, 6220L, 6310, 6310L, 6310S, 6320, 6320L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6510S, 6520L< li>
  • Compatible with John Deere Construction & industrial models 310K (s n 219607-277404), 310L (s n 273920-later), 310SK (s n 219607-277407), 310SL (s n 273920-later), 315SK (s n 219607-277141), 315SL (s n 273920-later), 325K (s n 219607-23969), 325SK (s n 235589-256253), 325SL (s n 273920-later), 410K (s n 219607-277405), 410L (s n 273920-later)< li>
  • Replaces John Deere OEM number R515588, R132976< li> < UL> (Part No: 168528)
$290.00
Exhaust Manifold Bolt Kit -
  • For John Deere tractor models 4000, 4010, 4020, 4040, 4230, 4320, 4520, 4620, 7020 (early)< li>
  • Compatible with John Deere Combine(s) 6600 (s n 156500-later), 6602 (s n 1500-earlier), 7700 (s n 8000-earlier)< li>
  • Compatible with John Deere Harvester(s) 5200 (early)< li>
  • Compatible with John Deere Construction & industrial models 600 (s n 200999-later), 644, 644A, 646, 690, 690A< li>
  • Compatible with John Deere Engine(s) 301, 341, 362, 381, 404< li>
  • Includes 8 bolts & washers< li> < UL> (Part No: 160831)
$29.26
Exhaust Manifold, Front - Fits 619 diesel engine. For tractor models 8630, 8640, 8650. (Part No: 110215)		$228.00
Exhaust Manifold, Front - For tractor models 5200, 5400, 5440, 5720, 5730, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9940, 9950, 644C, 644D, 646C, 690B, 690C, 690CR. Casting #R50391 or R56995. Replaces AR54563. (Part No: 100547)		$146.40
Exhaust Manifold, Front - Front exhaust manifold for diesel engines. For Model: 4320. Replaces AR49501. (Part No: 127262)		$335.00
Exhaust Manifold, Front - Front exhaust manifold for diesel engines. For tractor models: 4055, 4255, 4455, 4555, 4755, 4955, 8560, 8570, 9100, 9120. Uses gasket set R7031G sold separately. (Part No: 109997)$202.00
Exhaust Manifold Front Section -
  • For John Deere tractor models 4560, 4755 (w 6076ARW02 s n 165527-later), 4760, 4955 (w 6076ARW02 s n 165527-later), 4960, 7710 (s n 090000-later), 7810 (s n 090000-later)< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9640, 9650, 9650 CTS, 9660, 9660 CTS< li>
  • Compatible with John Deere Engine(s) 6076 (AF HF FT AFN), 6076 (s n 499999-earlier), 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R69936< li> < UL> (Part No: 110216)
$245.00
Exhaust Manifold Gasket Set - For model G. (Part No: 101576)		$36.26
Exhaust Manifold Gasket Set - This gasket set is for manifolds R5898 and B1313R only, on model B. Includes manifold and carburetor mounting gaskets. (Part No: 161674)		$17.26
Exhaust Manifold Gasket Set - This gasket set is used on manifold part numbers AB2846R and B2472R only. For model B. (Part No: 101573)		$16.50
Exhaust Manifold Gasket Set - This Gasket Set is used with A4640R Manifold on John Deere 60, 620, 630. It replaces A4642R, R100312, AA7300R (Part No: 101592)		$29.00
Exhaust Manifold Pipe -
  • For John Deere tractor model 1010 (gas or LP)< li>
  • Replaces John Deere OEM number AT21163< li>
  • 13" Long< li>
  • 2" O.D.< li>
  • This is a threaded pipe - will not work with original manifold< li>
  • For manifold and pipe use Item #: 101600< li> < UL> (Part No: 115155)
$14.95
Exhaust Manifold, Rear - Fits 619 diesel engine. For tractor models 6030, 7520, 8630, 8640, 8650, 8760, 8770, 8870. Replaces R57632. (Part No: 111161)		$184.00
Exhaust Manifold Rear Section John Deere R109693 -
  • For John Deere tractor models 4560, 4755, 4760, 4955, 4960, 7710 (s n 090000-later), 7810 (s n 090000-later)< li>
  • Replaces John Deere OEM number R109693, 6076AF< li> < UL> (Part No: 110295)
$173.00
Exhaust Pipe - A= 2 bolt inlet, B= 23" vertical length, C= 17" horizontal length, D= 2-1 2" Outlet O.D.. Used with AA4543R manifold, casting# A4039R, and R21826R & AA2214R mufflers. For model A styled Gas Serial Number 488000 and up, All Fuel Serial Number 584000 and up. NOT EXACTLY LIKE ORIGINAL. The pipe bends are somewhat different - will work fine. Original style is available as AA4014R-OEM. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 111250)		$148.10
Exhaust Pipe - 2 Bolt inlet, 21" vertical length, 19" horizontal length, 1-7 8" outlet O.D, black. Used with manifold AB2846R and muffler AB2700R. For model B styled SN# B6000-B183971. (Part No: 120190)		$41.99
Exhaust Pipe - 2 bolt inlet, 21" vertical length, 19" horizontal length, 1-7 8" outlet O.D, black. Used with manifold B73R and muffler AB2700R. For model B unstyled SN# B1000-B42199. (Part No: 109909)		$54.00
Exhaust Pipe - 2 bolt inlet, 21" vertical length, 19" horizontal length, 1-7 8" outlet O.D. Used with manifold B2179R, AB3980 casting# B2803R and muffler AB2700R. For tractor models B, BN, BNH, BW all with SN# B96000-B200999 built between 1939-1947. (Part No: 110483)		$38.00
Exhaust Pipe - 2 bolt inlet, 25" vertical length, 20" horizontal length, 1-7 8" outlet O.D. Used with manifolds B2282R, B2472R, AB3980R casting# B2803R and muffler AB2700R. For tractor models B, BN, BNH, BW. All SN# B201000 and up. (Part No: 108024)		$38.00
Exhaust Pipe - Exhaust Pipe (All-Fuel) for model A (S# S#488000-583999). (Part No: 109859)		$58.00
Exhaust Pipe - A= 2 bolt inlet, B= 15" vertical length, C= 23" horizontal length, D= 2-1 2" outlet O.D.. Use with manifolds F552R and AF1323R and mufflers R21826R and AA2214R. For tractor models G, GH, GN, GW all SN# G13000 and up. (Part No: 110909)		$41.99
Exhaust Pipe - A= 2 bolt inlet, B= 12" vertical length, C= 24" horizontal length, D= 2-1 2" outlet O.D.. Use with manifold A5751R and mufflers R21826R, AR20450 and AA2214R. For model 60 SN# 60139000 and up. (Part No: 111349)		$41.99
Exhaust Pipe - A= 2 bolt inlet, B= 13" vertical length, C= 25" horizontal length, D= 2-1 2" outlet O.D.. Use with manifold F30305R and mufflers R21826R, AR20450 and AA2214R. For tractor models (70 from 1953-1955), (720 from 1956-1958), (730 from 1958-1959). (Part No: 109943)		$41.99
Exhaust Pipe - Used with AR44418 muffler, B= 4" inlet I.D., E= 4" outlet O.D., F= 24" overall length. For tractor models (4520, 4620, 7020 with diesel engines). (Part No: 101189)		$37.40
Exhaust Pipe - A= 2 bolt inlet, B= 21" vertical length, C= 26" horizontal length, D= 1-7 8" outlet O.D.. Used with manifold F552R and muffler AB2700R. For tractor models (50 from 1953-1955), (520 from 1956-1958), (530 from 1958-1959). Replaces AR4638R. $15 additional shipping is required for shipping of this part. It will be included in the shipping total of your order. (Part No: 108499)		$35.70
Exhaust Pipe - A= 2 bolt inlet, B= 23 vertical length, C= 17 horizontal length, D= 2-1 2 Outlet O.D.. Used with AA4543R manifold, casting# A4039R, and R21826R & AA2214R mufflers. For model A styled Gas SN# 488000 and up, All Fuel Serial Number 584000 and up. EXACTLY LIKE ORIGINAL. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 186966)		$63.49
Exhaust Pipe - This exhaust pipe has a 3 Inch Inlet ID and 3 Inch Outlet OD. It is 41.5 Inches Overall Length. Black Enamel finish. It replaces John Deere part numbers AL31863, AL34694 (Part No: 113531)		$92.00
Exhaust Pipe - This exhaust pipe has a 3 Inch Inlet ID and 3 Inch Outlet OD. It is 53.75 Inches Overall Length. Black Enamel finish. It replaces John Deere part number AL31862. $5 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 113532)		$141.50
Exhaust Pipe -
  • For John Deere tractor models 70, 720, 730 (Diesel)< li>
  • Replaces John Deere OEM number AR20517R, AF1972R< li>
  • Vertical Length: 13"< li>
  • Horizontal Length: 25"< li>
  • Inlet: 2 Bolt Flange < li>
  • Outlet O.D.: 2-1 2"< li> < UL> (Part No: 111348)
$37.94
Exhaust Pipe -
  • For John Deere tractor model A (Gas S N 410000-476999)< li>
  • Replaces John Deere OEM number AA299R< li>
  • 4 Bolt Flange< li>
  • Mandrel Bend< li> < UL> (Part No: 114734)
$111.00
Exhaust Pipe -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE214149, RE49143, RE217832< li> < UL> (Part No: 158881)
$250.00
Exhaust Pipe -
  • For John Deere tractor models 6010, 6100, 6110, 6200, 6210, 6300, 6310, 6400, 6410, 6500< li>
  • Replaces John Deere OEM number L102641< li> < UL> (Part No: 164134)
$77.00
Exhaust Pipe -
  • For John Deere tractor models 6010, 6100, 6110, 6200, 6210, 6300, 6310, 6400, 6410, 6500< li>
  • Replaces John Deere OEM number L110288< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164135)
$161.00
Exhaust Pipe -
  • For John Deere tractor models SE6010, SE6110, SE6210, SE6310, SE6410, 5620, 5720, 5820, 6010, 6110, 6210, 6310, 6410< li>
  • Replaces John Deere OEM number AL116902, RE214751< li> < UL> (Part No: 164136)
$164.90
Exhaust Pipe -
  • For John Deere tractor models 6120, 6220, 6320, 6420< li>
  • Replaces John Deere OEM number L158904< li> < UL> (Part No: 165188)
$116.00
Exhaust Pipe -
  • For John Deere tractor models SE6110, SE6200, SE6210, SE6300, SE6310, SE6400, SE6410, 6100, 6110, 6110L, 6200, 6200L, 6205, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6400, 6400L, 6405, 6410, 6410L, 6500L, 6510L< li>
  • Replaces John Deere OEM number AL111094, L78811< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 165352)
$217.00
Exhaust Pipe -
  • For John Deere tractor models SE6520, SE6620, SE6920, 6510, 6520, 6530, 6610, 6620, 6810, 6820, 6910, 6920< li>
  • Replaces John Deere OEM number AL155688< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 171464)
$131.00
Exhaust Pipe -
  • For John Deere tractor models 840 (s n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640 (s n 430000-later), 1750, 1850, 1850N, 1950, 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2950, 2955 (s n 767516-earlier), 3040 (s n 430000-later), 3050, 3140 (s n 430000-later), 3150, 3155, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number AL61138< li>
  • Length: 50.39"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 171479)
$163.48
Exhaust Pipe -
  • For John Deere tractor models 840 (s n 599999-earlier), 940, 1040, 1140, 1350, 1550, 1640 (s n 430000-later), 1750, 1850, 1850N, 1950, 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2150, 2155, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2950, 2955 (s n 767516-earlier), 3040 (s n 430000-later), 3050, 3055, 3140 (s n 430000-later), 3150, 3155, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number AL61139< li>
  • Length: 42.72"< li> < UL> (Part No: 171481)
$127.00
Exhaust Pipe -
  • For John Deere tractor models 5083E, 5083EN, 5085M, 5093E, 5093EN, 5095M, 5095MH, 5101E, 5101EN, 5105M, 5105ML, 5425, 5425N, 5525, 5525N, 5603, 5625< li>
  • Replaces John Deere OEM number RE217574< li> < UL> (Part No: 172959)
$132.00
Exhaust Pipe -
  • For John Deere tractor models 2150, 2155 (non-turbo with 3-179 engine), 2350, 2355, 2550, 2555 (non-turbo with 4239D engine)< li>
  • Replaces John Deere OEM number JD2150SP< li>
  • For muffler kit use Item #: 114760< li> < UL> (Part No: 176551)
$28.50
Exhaust Pipe - For H (S#1000-#26999). Replaces H1062R. (Part No: 180628)		$55.00
Exhaust Pipe - For H (From S#27000. Replaces H1059R. (Part No: 109912)		$39.99
Exhaust Pipe and Bracket -
  • For John Deere tractor models 7210, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number R243585< li> < UL> (Part No: 169980)
$34.00
Exhaust Pipe - Corner Post Stack -
  • For John Deere tractor models 6110 (s n 244528-earlier), 6200 (s n 150286-later), 6210 (s n 244528-earlier), 6300 (s n 150286-later), 6310 (s n 244528-earlier), 6400 (s n 150286-later), 6410 (s n 244528-earlier)< li>
  • Replaces John Deere OEM number AL115443, AL82996< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164137)
$161.00
Exhaust Pipe Elbow w/Bracket -
  • For John Deere tractor models 5083E, 5083EN, 5093E, 5093EN, 5101E, 5101EN, 5425, 5425N, 5525, 5525N, 5603, 5625< li>
  • Replaces John Deere OEM number RE245831< li>
  • Muffler to Exhaust Pipe Elbow< li>
  • 2 Bolt Hole Welded on Bracket< li>
  • Color: Black< li> < UL> (Part No: 172957)
$175.00
Exhaust Pipe Flange - For model H. Replaces H1060R (Part No: 180644)		$51.00
Exhaust Pipe Gasket -
  • For John Deere tractor models 830 (3 cylinder), 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2120, 2130, 2440, 2640< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Compatible with John Deere Hay Cutting(s) 930< li>
  • Replaces John Deere OEM number R98844, MANIFOLD< li>
  • Gasket Between Muffler and Manifold< li>
  • For Tractors with Flared pipe< li> < UL> (Part No: 113526)
$3.56
Exhaust Pipe - Lower -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number RE161847, RE61175, RE151728, RE64215< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 165140)
$550.00
Exhaust Pipe Packing - This exhaust pipe packing is used on the model H. (Part No: H1061R)$9.30
Exhaust Rain Cap - 4", Chrome Plated -
  • For John Deere tractor models 4520, 4555, 4620, 4650, 4755, 4840, 4850, 4955, 7020, 9400, 9410 < li>
  • Compatible with Massey Ferguson tractor models 97, 2705, 2745, 2775, 2805, 3525, 3545, 3630, 3650, 3680< li>
  • Replaces OEM number 1022537M91, 11013, 12, 2842-64142, AR86603, RC9, RC-9< li>
  • Non Polished Finish < li>
  • Designed To Keep Out Rain, Dirt, Dust, Debris And Objects From Entering Exhaust Pipe< li>
  • Chrome Plated Hinged Cover< li>
  • Rain Cap- Gray use Item #: 108645< li> < UL> (Part No: 114793)
$42.00
Exhaust Repair Kit -
  • For John Deere tractor models 9200, 9300, 9400< li>
  • Saw off the burnt out or split section and clamp on the repair section< li>
  • Includes band clamp< li> < UL> (Part No: 115081)
$121.00
Exhaust Repair Kit -
  • For John Deere tractor models 8100, 8200, 8300, 8400< li>
  • Repair Your Muffler Outlet After It Rusts & Burns Off< li>
  • I.D.: 4"< li>
  • Length: 12"< li>
  • Includes Bolt Clamp< li>
  • Saw Off Approximately 12" Of Muffler Outlet & Install This Special Designed Turnout & Clamp< li>
  • Black< li> < UL> (Part No: 124268)
$77.20
Exhaust Repair Kit -
  • For John Deere tractor models 7600, 7610, 7810< li>
  • Repair Your Muffler Outlet After It Rusts & Burns Off< li>
  • I.D.: 3-1 2"< li>
  • Length: 12"< li>
  • Includes Bolt Clamp< li>
  • Saw Off Approximately 12" Of Muffler Outlet & Install This Special Designed Turnout & Clamp< li>
  • Black< li> < UL> (Part No: 124269)
$60.40
Exhaust Stack -
  • For John Deere tractor models B (S N B96000 - Later), BN, BW, 50, 520, 530< li>
  • Straight Pipe< li>
  • 4 Hole Base Plate< li>
  • 24" Tall< li>
  • Inside Liner For Long Life< li>
  • Chrome Plated< li>
  • Curved Stack - Chrome Plated use Item #: 115069< li> < UL> (Part No: 114752)
$135.88
Exhaust Stack -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Curved< li>
  • ID: 3-15 16"< li>
  • Lg 5" Outlet"< li>
  • Length: 48"< li>
  • Color: Black< li>
  • Flared on inlet end to fit turbo< li>
  • Curved Stack - Chrome Plated use Item #: 114771< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114863)
$161.00
Exhaust Stack -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Straight< li>
  • ID: 3-15 16"< li>
  • Length: 48"< li>
  • Lg 5" Outlet< li>
  • Color: Black< li>
  • Flared on inlet end to fit turbo< li>
  • Straight Stack - Chrome Plated use Item #: 114771< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114866)
$107.94
Exhaust Stack -
  • For John Deere tractor models A, G, 60, 70, 620, 630, 720, 730< li>
  • Style: Straight< li>
  • 4 Hole Base Plate< li>
  • O.D.: 4" < li>
  • Length: 24"< li>
  • Double Wall Liner< li>
  • Stainless Steel< li>
  • Straight Stack - Chrome Plated use Item #: 115068< li> < UL> (Part No: 115066)
$180.88
Exhaust Stack -
  • For John Deere tractor models B (after SN B96000), 50, 520, 530< li>
  • Style: Straight< li>
  • 4 Hole Base Plate< li>
  • Length: 24"< li>
  • Double Wall Liner< li>
  • Stainless Steel< li>
  • Straight Stack - Chrome Plated use Item #: 115071< li> < UL> (Part No: 115069)
$148.52
Exhaust Stack - 2-15/16" FL X 48", Curved Chrome -
  • For John Deere tractor models 3020, 4000, 4010, 4020, 4030, 4230, 4240< li>
  • Inlet I.D.: 2-15 16" FL< li>
  • Length: 48"< li>
  • John Deere Flared Inlet < li>
  • Curved Stack - Black Finish use Item #: 114772< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114827)
$158.00
Exhaust Stack - 2-15/16" FL X 48", Straight Stainless Steel -
  • For John Deere tractor models 3020, 4000, 4010, 4020, 4030, 4230, 4240< li>
  • Inlet I.D.: 2-15 16" FL< li>
  • Length: 48"< li>
  • Flared Inlet< li>
  • Stainless Steel< li>
  • Straight Stack - Chrome use Item #: 114772< li> < UL> (Part No: 114832)
$250.58
Exhaust Stack - 2-15/16" x 38", Curved Chrome -
  • For John Deere tractor models 3010, 3020, 4010 (Diesel S N 277026 - Earlier), 4020 (Gas), 4230 (Gas and LP)< li>
  • Style: Curved< li>
  • 2-15 16" I.D.< li>
  • O.D.: 5"< li>
  • Length: 38"< li>
  • Inner Liner< li>
  • Slotted Inlet< li>
  • Chrome Plated< li>
  • Straight Stack - Chrome Plated use Item #: 108873< li> < UL> (Part No: 115072)
$281.91
Exhaust Stack - 2-15/16" x 38", Straight Chrome -
  • For John Deere tractor models 3010, 3020, 4010 (Diesel S N 277026 - Earlier), 4020 (Gas), 4230 (Gas and LP)< li>
  • Style: Straight< li>
  • Inlet I.D.: 2-15 16"< li>
  • Outlet O.D.: 5"< li>
  • Length: 38"< li>
  • Slotted Inlet< li>
  • Inner Liner< li>
  • Chrome Plated< li>
  • Curved Stack - Chrome Plated use Item #: 108873< li> < UL> (Part No: 115073)
$240.00
Exhaust Stack - 2-15/16" X 48", Straight Chrome -
  • For John Deere tractor models 3010, 3020, 4010 (Diesel to SN 277026), 4020 (Gas), 4230 (Gas and LP)< li>
  • Style: Straight< li>
  • ID: 2-15 16"< li>
  • Length: 48"< li>
  • Not Flared Inlet Style< li>
  • Color: Chrome< li>
  • Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”< li>
  • Straight Pipe - Black Finish use Item #: 114835< li> < UL> (Part No: 114836)
$122.20
Exhaust Stack - 2-15/16" X 48", Straight Stainless Steel -
  • For John Deere tractor models 3010, 3020, 4010 (Diesel to SN 277026), 4020 (Gas), 4230 (Gas and LP)< li>
  • Style: Straight< li>
  • ID: 2-15 16"< li>
  • Length: 48"< li>
  • Not Flared Inlet Style< li>
  • Color: Stainless< li>
  • Straight Pipe - Chrome Plated use Item #: 114837< li> < UL> (Part No: 114835)
$187.94
Exhaust Stack - 2" X 48", Straight Black -
  • For John Deere tractor models 330, 420, 430, 435, 1010, 4350< li>
  • Compatible with John Deere Construction & industrial models 440< li>
  • Style: Straight< li>
  • ID: 2"< li>
  • Length: 48"< li>
  • Color: Black< li>
  • Straight Pipe - Chrome Plated use Item #: 114838< li> < UL> (Part No: 114839)
$46.50
Exhaust Stack - 2" X 48", Straight Chrome -
  • For John Deere tractor models 330, 420, 430, 435, 1010< li>
  • Compatible with John Deere Construction & industrial models 440< li>
  • Style: Straight< li>
  • ID: 2"< li>
  • Length: 48"< li>
  • Color: Chrome< li>
  • Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”< li>
  • Straight Pipe - Black Finish use Item #: 114839< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114838)
$73.00
Exhaust Stack - 3-15/16" FL x 48",Curved Black -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Curved< li>
  • ID: 3-15 16" FL< li>
  • Length: 48"< li>
  • Flared Inlet< li>
  • Color: Black< li>
  • Clamp use Item #: 114868< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114869)
$130.00
Exhaust Stack - 3-15/16" FL x 48", Curved Chrome -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Curved< li>
  • ID: 3-15 16" FL< li>
  • Outlet: 4"< li>
  • Length: 48"< li>
  • Flared Inlet< li>
  • Color: Chrome< li>
  • Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”< li>
  • Clamp use Item #: 114869< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114868)
$202.00
Exhaust Stack - 3-15/16" FL x 48",Straight Black -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Straight< li>
  • ID: 3-15 16" FL< li>
  • Length: 48"< li>
  • Flared Inlet< li>
  • Color: Black< li>
  • Straight Stack - Stainless Steel use Item #: 114771< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114872)
$74.00
Exhaust Stack - 3-15/16" FL x 48", Straight Chrome -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Straight< li>
  • ID: 3-15 16" FL< li>
  • Length: 48"< li>
  • Flared Inlet< li>
  • Color: Chrome< li>
  • Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”< li>
  • Clamp use Item #: 114870< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114871)
$172.35
Exhaust Stack - 5" X 72", Curved Chrome -
  • For John Deere tractor models 8100, 8200, 8300, 8400< li>
  • 5" I.D.< li>
  • 72" Long< li>
  • Includes Stainless Steel Band Clamp< li>
  • Chrome Plated< li> < UL> (Part No: 114755)
$372.79
Exhaust Stack, Chrome, Curved - Double wall, with mounting flange. For model H (Part No: 180713)$222.36
Exhaust Stack, Chrome, Straight - Double wall, with mounting flange. For model H (Part No: 179444)		$212.07
Exhaust Stack - Curved Chrome -
  • For John Deere tractor models 4560, 4760, 4960< li>
  • Replaces John Deere OEM number RE52088< li>
  • Chrome Plated< li>
  • Includes Chrome Clamp< li>
  • Curved Stack - Black Finish use Item #: 114756< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114757)
$224.70
Exhaust Stack - Curved Chrome -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Curved< li>
  • ID: 3-15 16"< li>
  • Outlet O.D.: 5"< li>
  • Length: 48"< li>
  • Color: Chrome< li>
  • Flared on inlet end to fit turbo< li>
  • Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”< li>
  • For Clamp use Item #: 114863< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114862)
$192.00
Exhaust Stack - Curved Chrome -
  • For John Deere tractor models 3020 (Diesel), 4000 (Diesel), 4010 (Diesel), 4020 (Diesel), 4030 (Diesel), 4230 (Diesel), 4240 (Diesel)< li>
  • Style: Curved< li>
  • Flared Inlet To Fit Manifold< li>
  • O.D.: 5"< li>
  • Length: 38"< li>
  • Inner Liner< li>
  • Chrome Plated< li>
  • Straight Stack W Liner use Item #: 114772< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 115074)
$285.00
Exhaust Stack Pipe - 2-1/2" x 42", Curved Black -
  • For John Deere tractor models SE6110, SE6200, SE6210, SE6300, SE6310, SE6400, SE6410, 5065M, 5070M, 5075M, 5076E, 5076EF, 5076EL, 5076EN, 5082E, 5090E, 5090EH, 5090EL, 5090EN, 5225, 5310N, 5325, 5325N, 5410, 5415, 5415H, 5420, 5420N, 5425 (s n 002631-earlier), 5425H (s n 002631-earlier), 5425HC (s n 002631-earlier), 5425N, 5510, 5510N, 5515, 5515F, 5515V, 5520, 5520N, 5605, 5605 (s n 15238-earlier), 5615, 5625 (s n 001688-earlier), 5705 (s n 15238-earlier), 5715, 5725 (s n 005047-earlier), 5725H (s n 005047-earlier), 5725HC (s n 005047-earlier), 5725N, 6100, 6110, 6110L, 6200, 6200L, 6205, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6400, 6400L, 6405, 6410, 6410L, 6500L, 6510L< li>
  • Replaces John Deere OEM number RE70280, L102236< li>
  • I.D.: 2-1 2" slotted (will not work in place of "crimped" style exhaust)< li>
  • Length: 42"< li>
  • Style: Curved< li>
  • Color: Black< li>
  • For chrome pipe use Item #: 173281< li> < UL> (Part No: 172950)
$78.00
Exhaust Stack - Straight Chrome -
  • For John Deere tractor models 3020 (Diesel), 4000 (Diesel), 4010 (Diesel), 4020 (Diesel), 4030 (Diesel), 4230 (Diesel), 4240 (Diesel)< li>
  • Style: Straight< li>
  • Flared Inlet To Fit Manifold< li>
  • O.D.: 5"< li>
  • Length: 38"< li>
  • Inner Liner< li>
  • Curved Stack use Item #: 114772< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 115075)
$250.00
Exhaust Valve Seat -
  • For John Deere tractor model 8850< li>
  • Compatible with John Deere Combine(s) 6602, 8820< li>
  • Compatible with John Deere Construction & industrial model 210G, 210GLC, 250GLC, 310L, 844, 990, 2144G< li>
  • Replaces John Deere OEM number R50356< li> < UL> (Part No: 166243)
$6.30
Flexible Exhaust Pipe -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE44784< li> < UL> (Part No: 185466)
$219.00
Flexible Exhaust Tube -
  • For John Deere tractor models SE6520, SE6620, 6520, 6615, 6620, 6820, 6920, 6920S, 7220 (s n 012450-earlier), 7320 (s n 012450-earlier), 7420 (s n 004516-earlier), 7515, 7520 (s n 004516-earlier)< li>
  • Replaces John Deere OEM number AL151148< li> < UL> (Part No: 171471)
$96.00
Heat Exchanger - For tractor models 60, 70, 620, 630, 720, 730. Replaces A4644R (Part No: 101593)		$24.00
Heat Exchanger - For model s:50, 520, 530. (Part No: 101589)$16.00
Heat Exchanger - For tractor models 50, 520, 530. (Part No: 101589)		$16.00
Heat Exchanger, Clamp - Clamp with stud and nut, use with B3213R & A4664R heat exchangers. (Part No: 101590)		$5.99
Intake and Exhaust Manifold Kit -
  • For John Deere tractor model 70< li>
  • Contains Manifold 101594, Heat Exchanger 101593, Exchanger Clamp 101590 and Gasket Set 101595< li> < UL> (Part No: 108735)
$300.00
Intake and Exhaust Manifold Kit -
  • For John Deere tractor models 720, 730< li>
  • Contains manifold 101596, Heat Exchanger 101593, Exchanger Clamp 101590 and Gasket Set 101597< li> < UL> (Part No: 108736)
$310.00
Intake and Exhaust Manifold Kit -
  • For John Deere tractor models 520, 530< li>
  • Contains manifold 101588, Heat Exchanger 101589, Exchanger Clamp 101590 and Gasket Set 101587< li> < UL> (Part No: 108737)
$420.00
Intake and Exhaust Manifold Kit -
  • For John Deere tractor models 60, 620, 630< li>
  • Contains Manifold 101591, Heat Exchanger 101593, Exchanger Clamp 101590 and Gasket Set 101592< li> < UL> (Part No: 108738)
$325.00
Intake and Exhaust Manifold Kit -
  • For John Deere tractor model 50< li>
  • Contains Manifold 101586, Heat Exchanger 101589, Exchanger Clamp 101590 and Gasket Set 101587< li> < UL> (Part No: 108739)
$325.00
Intake/Exhaust Manifold - Without heat exchanger For 520, 530. Intake Exhaust Manifold 2 piece. Gasket set available (R0159G). Uses heat exchanger (B3213R) and clamp(A4645R). (Part No: 101588)		$389.72
Intake Manifold - For 720, 730, both with Gas Engine. Intake Manifold. (Part No: 101596)$210.00
Maniflod - This is a perfect match for the original manifold on M, MI, MT, MC, 40. Other manifolds will work, but this one is built just like the original. This part replaces M408T, M1799T. If you need a gasket set, order part number R0309G. Note, this part may arrive as unpainted casting, not painted. (Part No: 101581)		$109.99
Manifold - Without heat exchanger For 50 GAS. Intake and Exhaust Manifold, 2 piece.Parts Not Included are gaskets, heat exchanger or clamp. Gasket set available (R0158G). Uses heat exchanger (B3213R) and clamp (A4645R). (Part No: 101586)		$295.00
Manifold - Without heat exchanger For 70. Intake and Exhaust Manifold, 2 piece. Gasket set for above (27.90 (R0160G). Uses heat exchanger (A4644R)and clamp (A4645R). Replaces: F1421R, F1422R (Part No: 101594)		$284.01
Manifold - Without Heat exchanger.For tractor models 720 and 730. 2 piece Intake and Exhaust Manifold. Gasket set Available Separately as part number R0215G. Uses heat exchanger A4645R and Clamp A4664R. Replaces: F3034R, F3035R (Part No: 101596)		$210.00
Manifold - For G All-Fuel after SN# 13000. Comes with Gasket Set (R0707G). Replaces: F136R, F552R (Part No: 101575)		$225.00
Manifold - For M, MT, 40, 320, 330 and 420. Gasket not included. If needed, order R0309G. Will work on all serial numbers. Replaces M3956T (Part No: 101581)		$109.99
Manifold - For Unstyled L. Replaces OEM# L849T (Part No: 101579)		$174.00
Manifold - For H. Manifold replaces original part number H136R. Uses gasket set R2424G, sold separately. (Part No: 101577)		$310.00
Manifold - For A serial number 488000 and up. Manifold. (0315R) Gasket available separately as part R0315G. (Part No: 101570)		$142.85
Manifold - For gas models:4000, 4010, 4020, 4230. Gaskets NOT included. (Part No: 101606)$198.90
Manifold - Vertical. For tractor models 1020, 1520, 300. All with 3 cylinder gas engines. Manifold gaskets available separately as part number R4596G. Replace T20251, T20251T (Part No: 109884)		$299.99
Manifold - USA made. For model B all-fuel from SN# 96000 to 183971. Replaces B1786R. Dies not come with gaskets. Uses gasket set R0149G. (Part No: 178970)		$375.00
Manifold - For 3010, 3020 All with Gas Engine. Exhaust Manifold. (Part No: 101604)$143.00
Manifold - This new manifold fits John Deere - L, LA, LI, LUC (all with John Deere Serial Number L640000 and up. Uses Gasket Set L4135T. Replaces: AL2841T (Part No: 126578)		$215.00
Manifold - If you are restoring your John Deere 420, this is the only manifold that matches original equipment. Used on John Deere 420 only, this manifold replaces M3956T and M3060T. Photo shows green paint. This part is ships bare casting. For Gaskets, order part number R0309G. (Part No: 179691)		$161.00
Manifold -
  • For John Deere tractor model A< li>
  • Replaces John Deere OEM number A36R< li>
  • Manifold gasket kit use Item #: 101568< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 101567)
$184.00
Manifold - For tractor models JD740, JD743, 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4840, 4850, 6600, 6602, 6620, 6622, 690B, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8650, 8820, 9940, 9950, 9960, 9965, 9970, 9976, 9986. Exhaust Manifold. Rear Section for Two Piece Exhaust System for 466 Engine. (Part No: 101612)		$136.00
Manifold - For 4000, 4010, 4020, 4040, 4050, 4230, 4240, ALL with Diesel Engine. Exhaust Manifold replaces BMD# B-R26362. Does not come with gaskets. $5 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101609)		$200.95
Manifold - For 1020, 1520, 1530, 2040, 2240, 820, 830, all with 3 cylinder diesel engines. Exhaust Manifold. Does not come with Manifold Gasket. Order part number R0912G for gasket set. (Part No: 101584)		$104.00
Manifold -
  • For John Deere tractor models 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3255, 3340, 3350, 3650< li>
  • Compatible with John Deere Combine(s) 965, 1065, 1072, 1075, 1155, 1157, 1158, 1166, 1169, 1174, 4435< li>
  • Compatible with John Deere Harvester(s) 9920, 9930< li>
  • Replaces John Deere OEM number R90262< li> < UL> (Part No: 164562)
$500.00
Manifold -
  • For John Deere tractor models 3030, 3040, 3050, 3130, 3140, 3150, 3340, 3350, 4040S, 4240S< li>
  • Compatible with John Deere Combine(s) 965, 975, 985, 1065, 1072, 1075, 1155, 1157, 1158, 1166, 1169, 1174, 1177, 4435, 6300, 7300, 7500, 7700< li>
  • Compatible with John Deere Construction & industrial models 444, 444C, 444CH, 444D, 540, 540A, 544, 544A, 570, 570A, 570B< li>
  • Replaces John Deere OEM number T30819< li> < UL> (Part No: 164565)
$135.00
Manifold - For tractor models 430, 440. (Part No: 101583)		$139.99
Manifold - This manifold is for gas engines with vertical Exhaust. Comes with 13 inch Exhaust Pipe For 1010. Order R4253G gasket set separately if needed. OEM# T19981, AT21163 (Part No: 101600)		$424.90
Manifold - Front Diesel Exhaust. For tractor models 4050, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450. Replaces R56995. (Part No: 100547)		$146.40
Manifold - All Fuel -
  • For John Deere tractor models A (s n 488000 - 583999), AO (s n 272000 - later, 1940-1947), AR (s n 272000 - later)< li>
  • Replaces John Deere OEM number A2383R< li> < UL> (Part No: 126523)
$191.00
Manifold Clamp Assembly -
  • For John Deere tractor models 4320, 4430, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AR3566R, AR35666, AR43704, AR64704< li>
  • Clamshell Manifold Clamp Assembly< li>
  • Heavy Duty< li> < UL> (Part No: 114771)
$24.11
Manifold, Exhaust - For tractor models 4000, 4010, 4020, 4230 all with gas engine. Exhaust Manifold with gaskets. (Part No: 101606)		$198.90
Manifold Exhaust Elbow -
  • For John Deere tractor models 4050 (w 6466DR s n 294598-306869), 4430, 4440 (w 6466TR), 4630 (w 6404AR s n 401567-earlier)< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730< li>
  • Compatible with John Deere Engine(s) 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R56994, R50392< li> < UL> (Part No: 180483)
$154.00
Manifold Gasket -
  • For John Deere tractor models 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6415, 6420, 6500, 6605, 6615, 6715, 6820, 6920, 6920S< li>
  • Replaces John Deere OEM number L79311, R115742< li> < UL> (Part No: 165268)
$4.22
Manifold Gaskets - Includes manifold and carburetor gaskets. Replaces: Carb Gasket: M3993T, Manifold Gasket: M3994T (Part No: 178130)		$8.30
Manifold Gasket Set - Fits 619 diesel engines, covers both front & rear manifolds. For tractor models 6030, 7520, 8630, 8640, 8650, 8760, 8770, 8870. (Part No: 183390)$33.76
Manifold Gasket Set - For gas tractor models (180, 202 power units from SN# 51230), 400 Ind., 401, 401B, 401C, 480 Forklift, 480A Forklift, 480B, 2020, 2510, 2520 all with 4 cylinder gas engines. (Part No: 107950)$39.95
Manifold Gasket Set - For tractor models: (4050 from s n 6510 and up), 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450. (Part No: 127263)		$25.26
Manifold Gasket Set - For tractor models: 4055, 4255, 4455, 4555, 4755, 4955, 8560, 8570, 9100, 9120. (Part No: 127264)		$25.26
Manifold Gasket Set - This gasket set is used with AL2841T Manifold. Replaces: Manifold gasket: L4135T, Carburetor gasket: L681T (Part No: 183800)		$26.25
Manifold Gasket Set - This gasket set is used with T20252 Manifold. For tractor models 1020, 1520, 1530, 2040, 2240, 820, 830, 920, 930 and 940. (Part No: 101585)		$5.26
Manifold Gasket Set - This gasket set is used with H136R manifold. (Part No: 101578)		$24.50
Manifold Gasket Set - This Gasket Set is used with F3034R Manifold. It replaces A4631R, A4642R, AF1688R, AF2608R, AF3724R, R524090 (Part No: 101597)		$28.50
Manifold Gasket Set - This Gasket Set is used with A3386R Manifold. (Part No: 101571)		$24.50
Manifold Gasket Set - This Gasket Set is used with T20249 Manifold. It replaces part numbers R90658, T20006 (Part No: 101603)		$10.26
Manifold Gasket Set - This Manifold Gasket Set is used with R4253 Manifold. Replaces T268T, AT12699 (Part No: 101599)		$13.00
Manifold Gasket Set - This Manifold Gasket Set is used with AT22610 Manifold. (Part No: 101599)		$13.00
Manifold Heat Baffle - This new manifold heat baffle, used on M, MT, MC, MI, 320 and 40, is often missing from tractors. Many times, when the manifold was changed they removed this baffle and did not re-install it. If you want your tractor back to original, you'll need this. It comes complete as shown and will be shipped to you as bare steel, ready for your paint and installation. Replaces: AM315T (Part No: 179575)		$66.00
Manifold Heat Baffle -
  • For John Deere tractor model 430< li>
  • Compatible with John Deere Construction & industrial model 440 (all gas LP)< li>
  • Replaces John Deere OEM number AT10285< li> < UL> (Part No: 115158)
$70.00
Manifold Intake/Exhaust - Manifold for model B after serial number 201000. Does not include gaskets. Uses gasket set R0149G. Will replace the mid-range serial numbers GAS models (not ALL FUEL) but is not exactly like original and must use exhaust pipe part number R1105. (Part No: 101574)		$155.00
Manifold Pipe - Used with AT22610 manifold. For Model: 2010 gas. Replaces AT12462 (Part No: 101601)		$23.49
Manifold Pipe -
  • For John Deere tractor model B (Unstyled s n B1000-B42199)< li>
  • Replaces John Deere OEM number AB322R< li>
  • Type:Manifold Pipe< li>
  • Shell:N A< li>
  • Inlet Type:2-Bolt< li>
  • Vertical Length:21"< li>
  • Horizonal Length:19"< li>
  • Outlet O.D.:1-7 8"< li>
  • Use With Muffler 101171< li> < UL> (Part No: 120189)
$53.00
Manifold Stud - 1 2" x 3-1 2". For Model: G. (Part No: 178268)$13.00
Manifold Stud - 1 2" x 5". For Model: G. (Part No: 178269)$13.00
Manifold Stud - 1 2" x 6". For Model: G. (Part No: 178270)$13.00
Manifold, Vertical Exhaust - This Diesel Manifold is used on 1830 (AG), 2011, 2020, 2030, 2035 (SPAIN), 2120, 2130, 2135, 2440, 2510, 2520, 2630, 2640, 401A, 401B, 401C, 480A, Forklift: 480B, Industrial: 310, 400, 401, 410, 480; models 4 cylinder 202, 219 or 276 cubic inch diesel engines with vertical exhaust. Does Not come with gasket. Gasket set available Part Number R0911G. (Part No: 101602)		$85.00
Muffler - Vertical & horizontal muffler~ round body, 2 bolt flange mount 1-7 8" O.D. 1-3 4" inlet I.D, 2" exhaust O.D, 21" overall length, 3-1 4" shell diameter. For tractor models (320, 330 1957-1959), (40 1953-1956), (M, MC, MT 1947-1952). Uses raincap Part # R1800. (Part No: 101172)		$45.76
Muffler - Vertical muffler~ round body. 2-15 16 inlet inside diameter~ 2-5 8 exhaust outside diameter~ 26 body length~6 body diameter. For tractor models: 4010 gas, 4010 diesel to engine serial number 7026, 4020 gas to tractor serial number 200999. For 4010, 4020 (Part No: 101187)		$43.70
Muffler - Vertical muffler~ round body. 2-15 16 inlet inside diameter~ 2-5 8 exhaust outside diameter~ 26 body length~6 body diameter. For tractor models: 3010 gas, 3010 diesel to engine serial number 6643, 3020 gas to tractor serial number 122999. For 3010, 3020 (Part No: 101187)		$43.70
Muffler - Vertical muffler~ round body. Flared inlet inside diameter~2-5 8 exhaust outside diameter~ 26 body length~ 6 body diameter. For tractor models: 4010 diesel engine serial number 7027 and up, 4020 diesel to tractor serial number 200999. For 4010, 4020 (Part No: 101188)		$52.00
Muffler - Vertical muffler~ round body. Flared~ 2-1 2 exhaust outside diameter~ 34 body length~ 4-1 2 body diameter. For tractor models: 2510 gas and diesel. For 2510 (Part No: 101186)		$56.00
Muffler - Vertical muffler~ oval body. Flared~ 4 exhaust outside diameter~ 34 body length. For tractor models: 4520, 4620, 7020 to engine serial number 335845, diesel. For 4520, 4620, 4650, 4840, 4850, 7020 (Part No: 102194)$255.00
Muffler - Vertical muffler~ oval body. Flared inlet inside diameter~3-1 2 exhaust outside diameter~ 37 body length. For tractor models: 5010, 5020, 6030 Non-Turbo. For 5010, 5020, 6030 (Part No: 101181)$167.00
Muffler - For tractor models 4520, 4620, 4650, 4840, 4850, 7020. (Part No: 102200)		$201.00
Muffler - Vertical muffler~ round body. 2 inlet inside diameter~ 2 exhaust outside diameter~ 17-1 2 body length~ 4-1 2 body diameter. For tractor models: 330, 420 serial number 135025 and up, 430, 435, 440 serial number 442886 and up, 1010 gas. For 1010, 330, 420, 430, 435, 440 (Part No: 101176)		$43.00
Muffler - Horizontal muffler~ round body. 2 inlet inside diameter~ 2 exhaust outside diameter~ 19 body length~ 4-1 4 body diameter. For tractor models: 330, 435, 440 diesel, 1010 gas. For 1010, 330, 435, 440 (Part No: 101177)		$50.10
Muffler - Vertical muffler~ round body. 2-3 16 inlet inside diameter~2-1 4 exhaust outside diameter~ 26 body length~ 4-1 2 body diameter. For tractor models: 1010 diesel to tractor serial number 31000, 2010 gas, 2010 diesel to tractor serial number 29000. (Part No: 101179)		$36.30
Muffler - Vertical or Horizontal muffler. Oval body. Inlet has 4-hole base plate, Outlet 1-3 4" outside diameter. Overall length 20". For: 650, 750 (1981 to 1988). Does not come with gasket. Gasket can be ordered as part number CH10403. (Part No: 114842)		$129.00
Muffler - Unstyled (no dent) For tractor models A, G, 620, 70, 720. Replaces AF3770R. Outlet is 2 1 2 inches, 24 1 4 overall length. (Part No: 113316)		$61.00
Muffler - For tractor models 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500L, (6210, 6210LS, 6310, 6310LS, 6410, 6410LS up to SN# 244528), 6510L, 6510S. (Part No: 125396)		$229.00
Muffler - Vertical muffler assembly is for tractor models 650, 750, 850, 950, 1050. Verify measurements. Flange is 4 bolt with 2 3 8 center to center, hole to next hole. Overall length is 34 1 2 inches. Length from center of flange to tip of outlet is 33 inches. Outlet pipe is 15 1 4 inches length and 1 5 8 diameter. (Part No: 186906)		$103.16
Muffler - With bracket. Vertical Round Body with 3 bolt casting. Shell length measures 19" with a shell diameter of 3-3 4". The Outlet OD measures 2-1 2" and the overall length is 24-3 8". For model A SN# 477000 to 487999. Replaces A2130R. (Part No: 110969)		$128.00
Muffler - A= 1.812" inlet length, B= 3.156" inlet I.D., C= 19" shell length, D= 2.375" outlet length, E= 2.520" outlet O.D., F= 21.750" overall length. For tractor models (55 SN# 46801-60000 with diesel engine), (95 SN# 9000 and up with gas engine), (105 with gas engine). (Part No: 172342)		$103.00
Muffler - Vertical Muffler measures Inlet at 4 hole baseplate, 2" inlet length, 12" shell length, 7" outlet length, 1-3 4" outlet O.D., 21-1 2" overall length. The mounting bolt pattern is 2 1 16 inches center-to-center. For tractor models 1050, 850, 950. (Part No: 114841)		$107.00
Muffler - Under the hood style muffler. For tractor models 1140, 1550, 1750, 1850, 1850N, 840, 940, (1350 up to SN 621999)2155 (Up to SN 621999). (Part No: 113488)		$210.00
Muffler - A= 3-7 8" inlet length, B= 2-7 8" inlet I.D., C= 24-1 8" shell length, D= 8-1 8" outlet length, E= 2-9 16" outlet O.D., F= 36-3 4" overall length. For tractor models 3030, 3120, 3130. (Part No: 113528)		$209.00
Muffler - This restoration quality muffler will be a perfect addition to your tractor. The shell length is 18.200” with a shell diameter of 3.150”. The outlet length measures 6.280” and the outlet OD measures 1.875”. The overall length of this muffler is 24.600”. Fits 50, 520, (530 Serviceable only); Replaces: AB4486R (Part No: 179595)		$74.00
Muffler - This is a Vertical Muffler used on 1830, 2020, 2030, 2120, 2130, 2440, 2640 All with 219 4 Cylinder Diesel Engines. Body Length 19-1 2 Inches, Inlet Inside Diameter 2-1 2 Inches, Outlet Outside Diameter  1-3 4 Inches, Overall Length 32-3 4 Inches. Uses T19978 Clamp, not included. Replaces AL27389 (Part No: 113529)		$95.00
Muffler - This is an under hood muffler used on John Deere models: 3140, 3255, 3340, 3350, 3640S, 3650. Replaces AL32652 (Part No: 113527)		$275.00
Muffler - Horizontal muffler with Heat Shield. Muffler measures 31 inches, 35 1 2 overall, has an inlet of 2 inches and an outlet of 1 3 4 inches. Body diameter is 4 5 8 inches. For models 300, 301, 301A, 302, 400, 401, 401B, 1020, 1120, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2140, 2240. (Part No: 163094)		$207.00
Muffler - This underhood Vertical Muffler is for tractor models 2140, 2555 Turbo, 2650, 2750, 2755, 2850, 2855. Diameter measures 7.7 inches, Inlet inside diameter is 2.99 inches, Outlet outside diameter is 2.5 inches and overall length is 11 inches. (Part No: 113491)		$165.00
Muffler - For tractor models 1640, 1840, 2040, 2040S, 2250, 2350, 2355, 2450, 2550, 2555. Muffler. Replaces AL31492, AL1492, AL31063 (Part No: 113493)		$147.00
Muffler - For tractor models 2940, 3040, 3140 SN# 429999 and up. Replaces AL30336, AL30338 (Part No: 113487)		$365.00
Muffler -
  • For John Deere tractor models 330, 420, 430, 440 (gas 1956-1959)< li>
  • Replaces John Deere OEM number AM3246T< li>
  • Muffler mount: Vertical< li>
  • Overall Length: 22"< li>
  • Shell Length: 16-1 2"< li>
  • Shell Diameter: 9" x 4-1 2"< li>
  • Inlet I.D.: 2"< li>
  • Inlet Length: 2-1 2"< li>
  • Outlet O.D.: 2"< li>
  • Outlet Length: 3-1 2"< li>
  • Color: Black< li>
  • Inlet Clamp use Item #: 108633< li> < UL> (Part No: 101173)
$70.63
Muffler -
  • For John Deere tractor models 6110 (Left Exhaust), 6110L (Left Exhaust), 6200 (s n 150285-later), 6200L, 6205, 6210 (Left Exhaust), 6210L (Left Exhaust), 6300 (s n 150285-later), 6300L, 6310 (Left Exhaust), 6310L (Left Exhaust), 6400 (s n 150285-later), 6400L, 6405, 6410 (Left Exhaust), 6410L (Left Exhaust), 6500 (s n 150285-later), 6500L, 6510L (Left Exhaust)< li>
  • Replaces John Deere OEM number AL113991, AL78267< li>
  • Under Hood Mount< li> < UL> (Part No: 113485)
$122.00
Muffler -
  • For John Deere tractor models 4560, 4755 (s n 10000 - later), 4760, 4955 (s n 10000 - later), 4960< li>
  • Replaces John Deere OEM number RE52086< li>
  • Exhaust Stack Black use Item #: 124253< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 117474)
$430.00
Muffler -
  • For John Deere tractor model 8970< li>
  • Replaces John Deere OEM number RE58616, RE52169, RE58233< li>
  • Replaces manufacturer number DR-46< li>
  • Type:Vertical < li>
  • Overall Length:47"< li>
  • Shell Diameter: 9"< li>
  • Shell Length:42"< li>
  • Inlet I.D.:6"< li>
  • Inlet Length:3-1 2"< li>
  • Outlet O.D.:5"< li>
  • Outlet Length:4"< li>
  • With 1-1 2" Aspirator Tube And 3 Hole Mounting Flange < li>
  • Check Inlet Size Before Ordering < li> < UL> (Part No: 120186)
$1025.00
Muffler -
  • For John Deere tractor model 8450 (s n 004218-earlier)< li>
  • Replaces John Deere OEM number AR95608< li>
  • Replaces manufacturer number DR-47< li>
  • Type:Vertical< li>
  • Overall Length:56"< li>
  • Shell Diameter: 9"< li>
  • Shell Length:43-1 2"< li>
  • Inlet I.D.:4"< li>
  • Inlet Length:4-1 2"< li>
  • Outlet O.D.:5"< li>
  • Outlet Length:8"< li>
  • Application Note: Muffler has a 6 hole mounting flange. Muffler has a 1-1 2" aspirator tube.< li> < UL> (Part No: 120187)
$570.00
Muffler -
  • For John Deere tractor models 6506, 6510, 6510 (SE), 6600, 6605, 6610, 6610 (SE), 6800, 6810, 6900, 6910, 6910 (S), 7405, 7500< li>
  • Replaces John Deere OEM number AL117923< li>
  • Inlet ID 2-7 16"< li>
  • Shell length 12-1 4"< li>
  • Outlet OD 3-13 32"< li>
  • Overall length 12-1 4"< li> < UL> (Part No: 155409)
$128.00
Muffler -
  • For John Deere tractor models 6615, 7220 (s n 012450-ealier using deluxe exhaust), 7320 (s n 012450-ealier using deluxe exhaust), 7420 (s n 012453-ealier using deluxe exhaust), 7515, 7520 (s n 012453-ealier using deluxe exhaust)< li>
  • Replaces John Deere OEM number AL153972< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164138)
$395.00
Muffler -
  • For John Deere tractor models 7220 (s n 012451-later), 7320 (s n 012451-later), 7420 (s n 012454-later), 7520 (s n 012454-later)< li>
  • Replaces John Deere OEM number AL155806 < li>
  • With Deluxe Exhaust< li>
  • Tier II Engine< li> < UL> (Part No: 168731)
$285.00
Muffler -
  • For John Deere tractor models SE6510, SE6610, 6510, 6610, 6810, 6910, 6910S< li>
  • Replaces John Deere OEM number AL113911< li> < UL> (Part No: 171483)
$365.00
Muffler -
  • For John Deere tractor models 7710 (s n 037439-later), 7810 (s n 037439-later)< li>
  • Replaces John Deere OEM number RE215931< li> < UL> (Part No: 171484)
$380.00
Muffler -
  • For John Deere tractor models 7600, 7700, 7800< li>
  • Replaces John Deere OEM number RE34315< li> < UL> (Part No: 171508)
$345.00
Muffler -
  • For John Deere tractor models 1850, 1950< li>
  • Replaces John Deere OEM number AL59301< li> < UL> (Part No: 171526)
$217.00
Muffler -
  • For John Deere tractor models 5076E, 5076EF, 5076EL, 5076EN, 5082E, 5083E, 5083EN, 5090E, 5090EH, 5090EL, 5090EN, 5093E, 5093EN, 5101E, 5101EN, 5425, 5425H, 5425HC, 5425N, 5525, 5525N, 5603, 5625, 5625HC, 5715, 5725, 5725H, 5725HC, 5725N< li>
  • Replaces John Deere OEM number RE210038< li> < UL> (Part No: 172974)
$126.00
Muffler - Vertical Exhaust Inlet I.D. - 4 Bolt Plate Outlet O.D. - 2 5 8 Overall Length - 21 For 60, 620, 630, 70, 720, 730 Gas70, 720, 730 Diesel. OEM# Use R1804 Rain Cap (Part No: 101169)$57.00
Muffler - Horizontal Exhaust Inlet I.D. - 2 Outlet O.D. - 2 Overall Length - 19 For 330 Gas435, 440 Diesel1010 Single Row-Crop & Utlity Gas. OEM# Use R1751 Clamp (Part No: 101177)		$50.10
Muffler - Vertical Exhaust Inlet I.D. - 2 Outlet O.D. - 2 Overall Length - 22 For 435, 440 Diesel. OEM# Use R1751 Clamp, Use R1800 Rain Cap (Part No: 101175)		$71.00
Muffler - Vertical Exhaust Inlet I.D. - 3 3 8 Outlet O.D. - 3 1 2 Overall Length - 19 For 830, 830 Industrial Diesel. OEM# AR21805R, Use R1806 Rain Cap (Part No: 101183)		$107.10
Muffler - Horizontal Exhaust Inlet I.D. - 2 1 8 Outlet O.D. - 2 Overall Length - 20 For 1010 (To S#31000) Diesel. OEM# Use R1751 Clamp (Part No: 101178)		$50.70
Muffler - Vertical Exhaust Inlet I.D. - 2 3 16 Outlet O.D. - 2 1 4 Overall Length - 26 For 2010 Row Crop Gas and LP Gas, 2010 Row Crop (To S#29000) Diesel. OEM# Use R1752 Clamp, Use R1802 Rain Cap (Part No: 101179)		$36.30
Muffler - Vertical Exhaust Inlet I.D. - Flared Outlet O.D. - 2 1 4 Overall Length - 24 For 1010 (From S#31001), 2010 (From S#29001) Diesel. OEM# Use R1802 Rain Cap (Part No: 101182)		$72.00
Muffler - +++USE PART NUMBER AR38383 +++ Vertical Exhaust Inlet I.D. - 2 1 2 - Flared Outlet O.D. - 2 1 2 Overall Length - 34 For 2510. OEM# Use R1802 Rain Cap (Part No: 101186)		$56.00
Muffler - Vertical Exhaust Inlet I.D. - 2 1 2 - Flared Outlet O.D. - 1 7 8 Overall Length - 33 For 2520. OEM# Use R1800 Rain Cap (Part No: 102198)		$123.30
Muffler - Vertical Exhaust Inlet I.D. - 2 15 16 Outlet O.D. - 2 5 8 Overall Length - 26 For 3010, 3020, 4000, 4010, 4020Gas and LP Gas3010 (To S#6643), 4010 (To S#7026)Diesel. OEM# AR26786, Use R1756 Clamp, Use R1804 Rain Cap (Part No: 101187)		$43.70
Muffler - Vertical Exhaust Inlet I.D. - 2 15 16 - Flared Outlet O.D. - 2 5 8 Overall Length - 26 For 3010 (From S#6644), 3020 (To S#122999), 4010 (From S#7027)4020 (To S#200999) Diesel. OEM# AR30190, Use R2051 Clamp, Use R1804 Rain Cap (Part No: 101188)		$52.00
Muffler - Vertical Exhaust Inlet Flared, Outlet O.D. - 2 1 4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4230 Diesel. OEM# AR86595, Use R2051 Clamp, Use R1801 Rain Cap and AR46323 Clamp. (Part No: 101190)		$58.00
Muffler - Vertical Exhaust Inlet I.D. - 2 15 16 Outlet O.D. - 2 1 4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4230Gas. OEM# Use R1756 Clamp, Use R1801 Rain Cap. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101191)		$77.41
Muffler - Vertical Exhaust Inlet I.D. - 2 15 16 Outlet O.D. - 2 5 8 Overall Length - 34. For tractor models 4050 (To S#5510), 4240. OEM# RE20220, Use R1804 Rain Cap and RE20221 clamp. (Part No: 102199)		$108.00
Muffler - With Aspirator Tube Vertical Exhaust Inlet I.D. - 3 15 16 - Flared Outlet O.D. - 4 Overall Length - 34 For 4520, 4620, 7020 Diesel. OEM# Use R1810 Clamp, Use R1807 Rain Cap (Part No: 102194)		$255.00
Muffler - Vertical Exhaust Inlet I.D. - 3 15 16 Outlet O.D. - 4 Overall Length - 38 For tractor models 4555, 4650, 4755 (up To SN# 10000), 4840, 4850, 4955 (up To SN# 10000). OEM# AR86602, RE20222. Uses R1807 Rain Cap and RE20223 clamp. (Part No: 121383)		$240.88
Muffler - Vertical Exhaust Inlet I.D. - 3 5 8 - Flared Outlet O.D. - 3 1 2 Overall Length - 37 For 5010, 5020, 6030. OEM# R35637, Use R1810 Clamp, Use R1806 Rain Cap (Part No: 101181)		$167.00
Muffler - With Aspirator Tube Vertical Exhaust Inlet I.D. - 3 15 16 - Flared Outlet O.D. - 5 Overall Length - 38 For 8430, 8630. OEM# Use R1810 Clamp, Use R1809 Rain Cap (Part No: 102196)		$424.90
Muffler - With Aspirator Tube Vertical Exhaust Inlet I.D. - 3 15 16 - Flared Outlet O.D. - 5 Overall Length - 38 For 8440, 8640. OEM# Use R1810 Clamp, Use R1809 Rain Cap (Part No: 102197)		$520.00
Muffler and Elbow - Originally, these two pieces were welded together on your tractor. This Muffler and Elbow comes to you already assembled. Replaces John Deere part number AL2812T (Part No: 115156)		$123.00
Muffler Clamp - Used with RE44716, RE164819, RE25444, RE229262 and RE58615 mufflers. For tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8120, 8130, 8220, 8230, 8320, 8330, 8430, 8520, 8530, 8570, 8770, 8870, 9100, 9200, 9300, 9400. (Part No: 180152)$34.76
Muffler Clamp - Used with R1678 muffler. For tractor models (4050 up to SN# 5510), 4240. (Part No: 180455)$24.50
Muffler Clamp - Used with mufflers AR61073, AR86599, RE20224, AR86602, RE20222 and R1679. For tractor models (4050 from SN# 5511 and up), 4055, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4630, 4640, 4555, 4650, (4755, 4955 up to SN# 10000), 4840, 4850. (Part No: 121384)$16.50
Muffler Clamp - Used with Mufflers R1083 and R1085, this two piece muffler clamp is used on the following John Deere models with flared muffler inlets: 4020, 500, 3010, 3020, 4000, 4010, 4030, 4230, 500A, 510, 570B, 570A, 4040, 4240, 4440. Replaces part numbers AR46323, DR-300, R32235 (Part No: 114772)		$13.00
Muffler Clamp -
  • For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2120, 2130, 2440, 2520, 2640< li>
  • Compatible with John Deere Combine(s) 2240, 3300< li>
  • Compatible with John Deere Construction & industrial models 300< li>
  • Compatible with John Deere Hay Cutting(s) 2280 (Hydro), 2320, 2420< li>
  • Replaces John Deere OEM number AT63813, T19978< li>
  • For Equipment With Flared Pipe Manifold Muffler< li>
  • 2 Pieces< li>
  • Does Not Come With Nuts And Bolts< li> < UL> (Part No: 109824)
$14.00
Muffler Clamp, 1-1/2 - New Clamp for 1-1 2 inch outside diameter muffler inlet. (Part No: 108865)		$3.20
Muffler Clamp, 1-1/4 - New Clamp for 1-1 4 inch outside diameter muffler inlet. (Part No: 182682)		$3.70
Muffler Clamp, 1-3/4 - New Clamp for 1-3 4 inch outside diameter muffler inlet. (Part No: 108866)		$3.56
Muffler Clamp, 1-3/8 - New Clamp for 1-3 8 inch outside diameter muffler inlet. (Part No: 182687)		$1.60
Muffler Clamp, 2-1/4 - New Clamp for 2-1 4 inch outside diameter muffler inlet. (Part No: 108870)		$3.56
Muffler Clamp, 2-3/4 - New Clamp for 2-3 4 inch outside diameter muffler inlet. (Part No: 108872)		$3.55
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: 108873)		$4.66
Muffler Clamp, 3-1/2 - New Clamp for 3-1 2 inch outside diameter muffler inlet. (Part No: 108874)		$10.20
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: 108875)		$4.66
Muffler Clamp, 4-1/2 - New Clamp for 4-1 2 inch outside diameter muffler inlet. (Part No: 118838)		$10.30
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: 118841)		$12.76
Muffler Clamp Gasket -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 2040, 2150, 2155 (S N 621999 - Earlier), 2250, 2350, 2355, 2450, 2550, 2555< li>
  • Replaces John Deere OEM number L34455, L62441< li>
  • 2 Bolt Hole Gasket [Between Muffler And Manifold]< li> < UL> (Part No: 113525)
$4.66
Muffler Clamp Seal -
  • For John Deere tractor models 2840, 2940 (s n 452124-later), 2950, 2955, 3010, 3020, 3030, 3040 (s n 452124-later), 3050, 3055, 3120, 3130, 3140 (s n 452124-later), 3150, 3155, 3350, 3640, 4000, 4010, 4020, 4030, 4050, 4230, 4240< li>
  • Replaces John Deere OEM number R227500, R31142< li>
  • Gasket Between Muffler And Manifold< li> < UL> (Part No: 113524)
$4.96
Muffler Conversion Kit - Muffler conversion kit, contains manifold to muffler pipe (2-bolt), muffler, above hood pipe, muffler clamp, and raincap. Converts from under hood to above hood exhaust. For tractors: 2150, 2155 non-turbo with 179D engine, 2350, 2355, 2550, 2555 non-turbo with 239 For 3010, 4010, 50, 60, 70, A, D, G, R (Part No: 114760)		$179.90
Muffler Conversion Kit - Muffler conversion kit, contains manifold to muffler pipe, muffler, above hood pipe, muffler clamp, and raincap. Converts from under hood to above hood exhaust. For tractors: 2840, 2940, 2950, 2955, 3150, 3155 (non turbo). (Part No: 114759)		$265.00
Muffler Conversion Kit -
  • For John Deere tractor models 2840, 2940, 2950, 2955, 3055, 3150, 3155 (Non-Turbo)< li>
  • Complete Kit Converts Underhood Muffler To Vertical System< li>
  • Kit Contains Lower Flared Mounting Pipe, Muffler, Extender, Raincap & Clamps< li>
  • Eliminates Muffler Heat Build Up< li>
  • Ready To Install< li> < UL> (Part No: 124259)
$282.94
Muffler Eliminator -
  • For John Deere tractor models 4560, 4760, 4960< li>
  • Black< li> < UL> (Part No: 124252)
$501.17
Muffler Extender Kit -
  • For John Deere tractor models 4520, 4620, 4840, 7020< li>
  • 4" I.D.< li>
  • 24" Tall< li>
  • Straight Pipe< li>
  • Black Finish< li>
  • Includes Clamp And Raincap< li> < UL> (Part No: 114750)
$89.70
Muffler Extender Kit -
  • For John Deere tractor models 4430, 4440, 4630, 4640< li>
  • Curved< li>
  • I.D.: 3-5 8"< li>
  • Length: 18"< li>
  • Includes Clamp< li>
  • Black< li> < UL> (Part No: 114848)
$89.55
Muffler Extender Kit - 3.500" I.D. -
  • For John Deere tractor models 4430, 4440, 4630, 4640< li>
  • Fits aftermarket mufflers< li>
  • I.D.: 3-1 2"< li>
  • Length: 18"< li>
  • Includes Clamp And Raincap< li>
  • Straight< li>
  • Black< li>
  • For 3-5 8" OEm muffler use Item #: 114849< li> < UL> (Part No: 161181)
$62.00
Muffler Extender Kit - 3.625" I.D. -
  • For John Deere tractor models 4430, 4440, 4630, 4640< li>
  • Replaces John Deere OEM number R66690< li>
  • Fits factory oem muffler < li>
  • I.D.: 3-5 8"< li>
  • Length: 18"< li>
  • Straight< li>
  • Includes Clamp And Raincap< li>
  • Black< li>
  • For use with aftemarket 3-1 2" O.D. muffler use Item #: 161181< li> < UL> (Part No: 114849)
$61.00
Muffler Extension - Can be used on CH15910 and M802472 mufflers. For tractor models 1050, 650, 750, 850, 950. (Part No: 114800)		$20.50
Muffler Gasket - Muffler to manifold gasket. For tractor models 650, 750, 850, 950, 1050. Replaces CH15915. (Part No: 184004)$5.17
Muffler, Horizontal - Round body 7" shell diameter, A= 4" inlet length, B= 2-3 4" inlet I.D., C= 20" shell length, D= 2-1 2" outlet length, E= 2-1 2" outlet O.D., F= 23" overall length. For tractor models (3300, 4400, 4420, 6600, 6620 all Combines). (Part No: 102088)		$161.00
Muffler, Horizontal - Round body 7" shell diameter, A= 4" inlet length, B= 3-1 2" inlet I.D., C= 20" shell length, D= 2-3 4" outlet length, E= 3" outlet O.D., F= 22-3 4" overall length. For tractor models (6620, 7700, 7720 all Combines with turbo charged engines). (Part No: 102089)		$217.66
Muffler, Horizontal - Round body 5-1 2" shell diameter, A= 2" inlet length, B= 3-1 8" inlet I.D., C= 19" shell length, D= 3-1 2" outlet length, E= 2-3 4" outlet O.D., F= 22-3 4" overall length. For tractor models 699, 9900. (Part No: 120188)		$92.00
Muffler, Horizontal - Round body. Inlet 2-1 8 inchI.D, outlet 1-3 4 inch O.D, 35 inch overall length. For tractor models 2010 SN# 201000 and up. Additional $10 shipping due to size. This additional charge will be added to your order. (Part No: 101185)		$59.00
Muffler Inlet Gasket -
  • For John Deere tractor models 940, 1040, 1140, 1350 (s n 621999-earlier), 1550 (s n 621999-earlier), 1640, 1750 (s n 621999-earlier), 1840, 1850 (s n 621999-earlier), 2040, 2040S, 2150, 2155 (s n 621999-earlier), 2250, 2350, 2355 (Without Turbocharger), 2450, 2550, 2555 (Without Turbocharger), 2650< li>
  • Replaces John Deere OEM number L200245, L34455, L62441< li>
  • C to C: 3.583" (.354" Mounting Holes)< li>
  • Inside Hole Diameter: 2.559"< li>
  • Overall Length: 4.449"< li>
  • Thickness: .047"< li>
  • Width: 3.150"< li> < UL> (Part No: 161807)
$6.70
Muffler Pipe - A= 2 bolt inlet, B= 14" vertical length, C= 26" horizontal length, D= 2-1 2" outlet O.D.. Used with manifold A5751R and mufflers R21826R, AR20450 & AA2214R. Replaces AA6742R. For tractor models (620, 630 1956-1958 Row crop & standard models). (Part No: 107996)		$39.76
Muffler - Right Hand -
  • For John Deere tractor models SE6110 (s n 244259-later), SE6120 (with Turbo Vertical or Horizontal Exhaust), SE6210 (s n 244259-later), SE6220 (with Turbo Vertical or Horizontal Exhaust), SE6320, SE6320 (with Vertical or Horizontal Exhaust), SE6420 (with Vertical or Horizontal Exhaust), 6020 (s n 799999-earlier), 6110 (s n 244529-later), 6110L (s n 244259-later), 6120 (s n 799999-earlier), 6120L, 6210 (s n 244259-later), 6210L (s n 244259-later), 6215, 6220 (s n 799999-earlier), 6220L, 6310 (s n 244529-later), 6310L (s n 244529-later), 6310S (s n 244529-later), 6320 (s n 799999-earlier), 6320L, 6410 (s n 244529-later), 6410L (s n 244529-later), 6410S (s n 244529-later), 6415, 6420 (s n 799999-earlier), 6420L, 6420S (s n 799999-earlier), 6425, 6510S (s n 244529-later), 6520L< li>
  • Replaces John Deere OEM number AL117294< li> < UL> (Part No: 128159)
$199.00
Muffler, Support Bracket - For tractor models 50 from SN# 16616, 520. (Part No: 109855)		$98.00
Muffler Support Elbow -
  • For John Deere tractor model 530< li>
  • Replaces John Deere OEM number R20449R< li>
  • Bare Casting< li>
  • Bolts To The Radiator< li> < UL> (Part No: 126543)
$99.95
Muffler, Underhood - For tractor models (3400 with 4036T engine), (3300 with 4045D engine), (2040S, 2450 with 4239D engine), (2140, 2650, 2650N, 2850 with 4239T engine). (Part No: 113491)		$165.00
Muffler, Underhood - For 2940 SN# 452124 and up, 2950, 2955, 3040 SN# 452124 and up, 3050, 3055, 3140 SN# 452124 and up, 3150, 3155, 3350, 3640. Muffler. (S.14825) (Part No: 113490)		$255.00
Muffler, Vertical - Oval body. Inlet 3-5 16 inch I.D, outlet 5 inch O.D, 38 inch overall length. Muffler has straight aspirator 1-1 2 inch O.D. For tractor models 8440, 8640. (Part No: 102197)		$520.00
Muffler, Vertical - Vertical muffler with dent, round body 4-Bolt Base plate, 2-1 2" exhaust O.D., ~ 24-1 2" total length~ 3-3 4 body diameter. For tractor models: (A, AR, AN, AW, AWH all 1933-1952), G (SN# 410000> 1938-1953), 60, 70, 620, 720 (gas & all fuel). Replaces AF3770R and R21826. (Part No: 101170)		$33.00
Muffler, Vertical - Oval body. 2" inlet inside diameter~ 2" exhaust outside diameter~ 22" body length. For tractor models 320, 330, 420, 430 serial number 135025 and up, 440 serial number 442886 and up. For 320, 330, 420, 430, 440. OEM# Use R1751 Clamp, Use R1800 Rain Cap. (Part No: TP-AM3246T)		$51.26
Muffler, Vertical - Vertical muffler~ oval body. Flared inlet inside diameter~3-1 2 exhaust outside diameter~ 37 body length. Oval. For tractor models: 4320, 4430, 4630, diesel. Replaces AR61073. For 4240, 4320, 4430, 4630. $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 121382)		$150.00
Muffler, Vertical - MUFFLER For 4050, 4240. Flared inlet, 3.5 inch outlet, 38 inch overall length, Oval shape. (Part No: 102199)		$108.00
Muffler, Vertical - Oval body. For tractor models 50, 520, 530. Muffler portion is 19 inches long, overall length is 22 3 4 inches. (Part No: 110902)		$82.00
Muffler, Vertical - Round body 4-1 4" shell diameter, 4 bolt mounting plate, A= 4-1 2" inlet length, B= backing plate, C= 14-1 2" shell length, D= 2-1 2" outlet length, E= 2-5 8" outlet O.D., F= 21" overall length. For tractor models (A, AN, ANH, AR, AW all SN# 410000 and up), 60, 620, 70, 720. This style is not available from the OEM. (Part No: 101168)		$32.50
Muffler, Vertical - Round body 3-3 4" shell diameter, 3 bolt mounting plate, 18-1 4" shell length, 1" outlet length, E= 2-1 2" outlet O.D., F= 20" overall length. For model (R with diesel engine from 1949 to 1954), (80 with diesel engine from 1954 to 1956), (820 with diesel engine from 1956 to 1958). (Part No: 102195)		$106.00
Muffler, Vertical - Oval body 9-1 2" x 5-1 2" shell, A= 2-1 2" inlet length, B= 3-3 8" inlet I.D., C= 14-1 4" shell length, D= 2-3 4" outlet length, E= 3-1 2" outlet O.D., F= 19" overall length. For tractor models (80, 820 optional muffler), (830 standard muffler) (Part No: 101183)		$107.10
Muffler, Vertical - Round body 4-1 4" shell diameter, A= 2-1 4" inlet length, B= 2-1 2" inlet length, C= 19-3 4" shell length, D= 5" outlet length, E= 2-1 2" outlet O.D., F= 24" overall length. For tractor models (45 SN# 8000 and up with gas engine), (55 SN# 46801-57000 with gas engine). (Part No: 173251)		$60.00
Muffler, Vertical - This vertical muffler measures 2-1 2 inches flared inlet, 2 inches outlet outside diameter, 31-1 2 inches overall length. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, (1350, 1550, 1750, 1850 SN# up to 621999), 820, 830, 840, 920, 930, 940, 1630. (Part No: 113530)		$93.00
Muffler, Vertical - Oval body 4-1 4" x 9" shell dimension, inlets flared. A= 8-1 4" inlet length, B= 2-1 2" inlet I.D., C= 19-1 2" shell length, D= 7-3 4" outlet length, E= 2" outlet O.D., F= 33-1 2" overall length. For tractor models (2010, 2020 for gas, LP or diesel engines with vertical exhaust). Replaces AT21689. Due to the size of this part, $18 additional shipping will be added to your order. This will appear in the shipping total of your order. (Part No: 101184)		$56.00
Muffler, Vertical - Oval body 4-3 4" x 8" shell dimensions, A= 1-1 2" inlet length, B= 3-15 16" inlet I.D., C= 33" shell length, D= 3" outlet length, E= 3-1 2" outlet O.D., F= 37" overall length. New design replaces flared inlet. For tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4630, 4840, (4540 SN# 5511 and up). Replaces AR86599, AR48773, AR61073. Uses clamp DR400A please specify in comments section if needed. $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101192)		$132.50
Muffler, Vertical - 3-15 16" inlet I.D., 4" flared outlet O.D., 36-1 2" overall length, uses R1810 clamp. For tractor models (6030 Turbo 1972-1977), (7020 Turbo 1971-1975 with engine SN# from 335846), (7520 Turbo 1972-1975 4WD). (Part No: 114899)$315.00
Muffler, Vertical - This restoration quality muffler will be a perfect addition to your tractor. The shell length is 18.200” with a shell diameter of 3.150”. The outlet length measures 6.280” and the outlet OD measures 1.875”. The overall length of this muffler is 24.600”. Fits John Deere B serial number 96000 and up. Replaces: AB2700R (Part No: 112463)		$99.00
Muffler, Vertical - This new Muffler measures Inlet I.D. Flange, Outlet O.D. 5 inches, O A Length 52 inches, Inlet Length 5 inches, Outlet Length 5 inches, Shell Length 41 inches. Replaces AR95833, DR-42, RE25444, RE41891 (Part No: 114748)		$700.00
Muffler, Vertical - Replaces original mufflers on vertical exhaust systems. Used on John Deere 6506, 6600, 6800, 6900. (Part No: 165466)		$202.00
Muffler, Vertical - Has 4 Hole Baseplate. Outlet is 2 1 4 inch O.D., 24 inches overall length. For tractor models B SN# B96000 and above, BN, BW, 50, 520, 530. Has 4 bolt square mounting flange. (Part No: 101171)		$25.50
Muffler, Vertical - Oval body. Inlet 2-1 2 inch I.D inlet is flared, 1-7 8 inch O.D, 33 nchoverall length. For model 2520 (Part No: 102198)		$123.30
Muffler, Vertical - Oval body. Inlet 2-15 16 inch inside diameter, outlet 2-1 4 inch outside diameter, 27 inch overall length. For tractor models: 3020 gas serial number 123000 and up, 4000, 4020 gas serial number 201000 and up, 4230. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101191)		$77.41
Muffler, Vertical - Oval body. Inlet 3-5 16 inch I.D, outlet 5 inch O.D, 38 inch overall length. Muffler has straight aspirator 1-1 4 inch O.D. For tractor models 8430, 8630. (Part No: 102196)		$424.90
Muffler, Vertical Exhaust - Inlet I.D. 5", outlet O.D. bent pipe, overall Length 66", uses RE53282 clamp. For tractor models 8100, 8200, 8300, 8400, 8110, 8210, 8310, 8410. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 114898)		$319.50
Muffler, Vertical Exhaust - Inlet I.D. 5", outlet O.D. bent pipe, overall Length 69", uses RE53282 clamp. For tractor models 8120, 8220, 8320, 8520, 8130, 8230, 8330, 8430, 8530. Replaces RE195069, RE210829. (Part No: 114897)$730.00
Muffler, Vertical Exhaust - With 1 1 2" aspirator tube, inlet = 5", 6 Hole Flange, outlet O.D. 5", overall Length 52". Uses RE53282 clamp. Replaces RE41891. For tractor models 8560, 8760, 8960 all built from 1989 to 1993. (Part No: 114748)$700.00
Muffler, Vertical Exhaust - With 2" aspirator pipe, inlet I.D. 5", outlet O.D. 5", overall length 55 1 2", Use RE53282 clamp. For tractor models 9100, 9200, 9300, 9400 all built from 1996 to 2002. (Part No: 114896)$1096.33
Muffler, Vertical Exhaust - With 1 1 2" aspirator pipe, vertical exhaust, inlet I.D. 5" 3 Hole, outlet O.D. 5", overall length 46". Uses RE53282 clamp. For tractor models 8570, 8770, 8870. (Part No: 120184)$975.00
Oval Muffler - Vertical muffler, black, oval body. A= 3-1 2" inlet length, B= inlet I.D. flared, C= 19-1 2" shell length, D= 7-3 4" outlet length, E= outlet O.D. 2", F= 30" overall length. For tractor models: 1020, 1520, 1530, 2020, 2030 gas, 2040, 2240, (2640 engine>SN# 341000). (Part No: 101180)		$56.00
Oval Muffler - Vertical muffler~ oval body. Flared~ 2 exhaust outside diameter~ 33-1 2 body length. For tractor model: 2020 gas and diesel. Replaces AR64102.TP-AT21690 For 2020. Due to the size of this part, $18 additional shipping will be added to your order. This will appear in the shipping total of your order. (Part No: 101184)$56.00
Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: 108632)		$6.96
Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: 108633)		$8.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: 108635)		$10.30
Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: 108636)		$10.30
Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: 108643)		$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: 108645)		$13.26
Rain Cap - This rain cap is for a 4.50 inch pipe. (Part No: 108749)		$14.00
Rain Cap - This rain cap is for a 5.0 inch pipe. (Part No: 108750)		$15.26
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 179749)		$5.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 185428)		$9.50
Stainless Steel Muffler -
  • For John Deere tractor models A (s n 476999-earlier), AR, G, GM, 60, 70, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AA2214R, AF3770R< li>
  • Polished Stainless Steel< li>
  • Overall Length: 24"< li>
  • Shell Length: 28.850"< li>
  • Shell Diameter: 3.735"< li>
  • Outlet OD: 2.440"< li> < UL> (Part No: 164542)
$155.00
Stainless Steel Muffler -
  • For John Deere tractor model A (s n 488000-later)< li>
  • Replaces John Deere OEM number AA2214R< li>
  • Polished Stainless Steel< li>
  • Includes a dent for the steering shaft< li>
  • Shell Length: 20.850"< li>
  • Shell Diameter: 3.735"< li>
  • Outlet OD: 2.440"< li>
  • Overall Length: 21-1 8"< li> < UL> (Part No: 164543)
$153.00
Stainless Steel Muffler -
  • For John Deere tractor model B (s n 96000-later)< li>
  • Replaces John Deere OEM number AB2700R< li>
  • Polished Stainless Steel (Discoloration due to extreme heat is possible)< li>
  • Shell Length: 18-1 4"< li>
  • Shell Diameter: 3-1 8'< li>
  • Outlet Length: 6-5 16"< li>
  • Outlet OD: 1-7 8"< li>
  • Overall Length: 24-11 16"< li> < UL> (Part No: 164544)
$154.00
Stainless Steel Muffler -
  • For John Deere tractor models 50, 520, 530< li>
  • Replaces John Deere OEM number AB4486R< li>
  • Polished Stainless Steel (Extreme heat can cause discoloration)< li>
  • Shell Length: 18.200"< li>
  • Shell Diameter: 3.150"< li>
  • Outlet Length: 6.280"< li>
  • Outlet OD: 1.875"< li>
  • Overall Length: 24.600'< li> < UL> (Part No: 164545)
$141.00
Stainless Steel Muffler -
  • For John Deere tractor models M, MC, MT, 40, 320, 420< li>
  • Replaces John Deere OEM number AM3101T, AM364T, AM625T< li>
  • Polished Stainless Steel (Extreme heat can cause discolorations)< li>
  • Inlet Length: 2-1 4'< li>
  • Inlet OD: 1.905"< li>
  • Shell Length: 14-1 2"< li>
  • Shell Diameter: 3-1 4"< li>
  • Outlet Length: 3-1 2" < li>
  • Outlet OD: 1.660"< li>
  • Overall Length: 20-1 2"< li> < UL> (Part No: 164547)
$131.00
Stainless Steel Straight Exhaust Pipe - For Styled B, 50, 520, 530. Stainless Steel Straight Exhaust Pipe. (Part No: 178673)		$195.60
Stainless Steel Straight Pipe - For B Unstyled. Stainless Steel Straight Pipe. With 3 bolt Flange (Part No: 179052)		$257.36
Straight Chrome Exhaust Stack -
  • For John Deere tractor models 4320, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Style: Straight< li>
  • ID: 3-15 16"< li>
  • Lg 5" Outlet< li>
  • Length: 48"< li>
  • Color: Chrome< li>
  • Flared on inlet end to fit turbo< li>
  • Use clamp 114771< li>
  • Discoloration will occur due to a fast startup not allowing the chrome exhaust pipe to warm up slowly thus causing the “bluing”< li>
  • Straight Stack - Black Finish use Item #: 114866< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114865)
$185.73
Straight Pipe - Stainless Steel, Straight Stack. Double wall construction with 4 bolt flange. 24 inches tall, 3 1 2 inch outside diameter. For tractor models Unstyled A, G, 60, 70, 620, 630, 720, 730. (Part No: 178912)		$205.89
Stud, Manifold - 7 16" x 6-1 8". For model A from SN# 410000 to 487999. Replaces A117R. Uses R5294 nut. (Part No: 178416)		$6.96
Stud, Manifold - 7 16" x 5-1 2". For tractor models (A from SN# 410000 to 487999), (AO, AR from SN# 250000 to 259999). Use R5294 nut. (Part No: 178415)		$6.96
Stud, Manifold - 7 16" x 4-3 8". For tractor models A, (AO, AR from SN# 272000 to 281999), B, (BO, BR from SN# 325000 and above), H. Replaces R2622R. Uses R5294 nut. (Part No: 178414)		$8.30
Stud, Manifold - 7 16" x 3". For tractor models (50 up to SN# 5015950), (B all fuel from SN# 183972). Uses R5294 nut. (Part No: 178407)		$6.96
Stud, Manifold - 7 16" x 3-1 2". For tractor models (A from SN# 488000 and above), (AO, AR from SN# 272000 to 281999). Uses R5294 nut. (Part No: 178410)		$6.96
Stud, Manifold - 7 16" x 4-3 4". For tractor models (A all-fuel from SN# 488000 to 583999), (AO, AR from SN# 250000 to 259999), (B from SN# 1000 to 529999). Uses R5294 nut. (Part No: 178413)		$6.96
Stud, Manifold - 7 16" x 4". For tractor models (B from SN# 6000 and above), (BO, BR from SN# 239000 and up). Uses R5294 nut. (Part No: 178412)		$6.96
Stud, Manifold - 7 16" x 1-7 8". For model B gas from SN# 201000 and above. Uses R5294 nut. (Part No: 178405)		$5.80
Stud Nut, Manifold - Original 7 16 inch style with oversized shoulders. Replaces 10A1052, 17890A, 30-3462161, 369065X1, 50A1008, 915834. For the following tractors: A, B, AI, AR, BO, BR, H (Part No: 183464)		$1.70
Vertical Muffler - With inlet I.D. plate. Outlet O.D. is 2-5 8", Length is 21". OVAL SHAPED. For tractor models 60, 620, 630, 70, 730 Gas; and for diesel Models 70, 720, 730. (1084R) (Part No: 101169)		$57.00
 
Fuel System / Air Intake
3-Way Fuel Valve - Made of brass. For tractor models (A SN# 497590 to 697756), (AR, AO SN# 260000 to 280849), (B SN# 94494 to 305246), (D SN# 148872 to 191777), (H SN# 20650 and up), (G SN# 13000 to 59701). (Part No: 125700)		$89.95
3-Way Fuel Valve - For tractor models (A SN# 410859-476999), (B SN# 1000-11621), (D SN# 30400-143799), GP. (Part No: 121906)		$74.95
3-Way Fuel Valve - For tractor models (AR SN# 250000-259999), (B SN# 11622-59999), (BR SN# 325000 and up), (G (SN# 1000-12999). (Part No: 121905)		$74.95
Accelerator Lever - For H. Replaces OEM #H404R. (Part No: 179845)$17.00
Adjustable Load Needle - Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off 90 degrees from the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 2.417 inches overall length, 1 2 - 20 thread size. (Part No: 112230)		$41.00
Adjustable Load Nozzle Assembly - Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off opposite of the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 1.965 inches overall length, 1 2 - 20 thread size. Replaces AR46109, H21058, R13069, R13070, AR13029 (Part No: 112231)		$34.76
Adjustable Needle Assembly - 3 8 inch x 24 thread. Main Adjusting Needle. For tractor models: M, MC, MT, 40, 420, 430 with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. (Part No: 108463)		$25.26
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1 4 inch, side height 3 inches, cone inside diameter at top 3-1 2 inch, overall height 4-1 8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: 157279)		$10.00
Air Cleaner Cup - Dry Type -
  • For John Deere tractor models 4000, 4020 (all diesel)< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number R39827< li> < UL> (Part No: 127297)
$82.99
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Part No: 121925)		$7.90
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Part No: 121925)		$7.90
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Part No: 121925)		$7.90
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Part No: 121925)		$7.90
Air Cleaner Hose - A=2.437", B= 2.250". For tractor models 1020, 1030, 1120, 1130, 1530, 2040, 820, 830, 930. (Part No: 172348)		$25.00
Air Cleaner Hose, Suction - A= 2.75", B=2.00". For tractor models 1020, 1030, 1120, 1130, 1530, 1630, (1830, 2030 SN# 115792 TO 292145), (2040 SN# UP TO 349999), (2130 SN# 115792 TO 292145), (2240 SN# UP TO 349999), 820, 920, 830, 930. (Part No: 172346)		$22.26
Air Cleaner Intake Stack -
  • For John Deere tractor model G (Unstyled s n G12999-earlier)< li>
  • Replaces John Deere OEM number AA931R< li> < UL> (Part No: 126381)
$96.00
Air Cleaner Oil Cup - Cup is 5 3 4 inches O.D. at the lip. Fits B SN# 60000 and up, BR-BO SN# 329302 and up, H, 50, 520 and 530. For clamp style air cleaners, not clip style. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Part No: 108775)		$28.99
Air Cleaner Oil Cup - This cup is for Clamp Type Air Cleaners. This cup measures 4 3 4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For model H. Replaces part numbers AH774R, AR773R. (Part No: 111005)		$15.26
Air Cleaner Oil Cup with Clamp - For tractor models M, MT. (Part No: 185531)		$47.49
Air Cleaner Pipe Grommet - This air cleaner pipe grommet has an inside diameter of 2.60 inches, outside diameter of 6.82 inches and is 2.37 inches tall. For tractor models (820, 830 3 cylinder), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 6150, (4000, 4020 diesel), 4030, 4040, (4050 up to SN# 5510), 4230, 4240. Replaces AR56275, R28799, R50082, R57119. (Part No: 125562)		$14.99
Air Cleaner Stack - For tractor models 820 and 830, both 2 cylinder. (Part No: 180694)$66.00
Air Cleaner Stack - For models 630, 730 that use stack with pre-cleaner. Used with AF3580R pre-cleaner. Replaces AR20669R (Part No: 182847)		$66.00
Air Cleaner Stack - For A after SN# 477000. Air Cleaner Stack. Also replaces OEM# AA4048R. (Part No: 107893)		$66.95
Air Cleaner Stack - For model 520. (Part No: AB5438R)$362.31
Air Cleaner Stack - For 530. Air Cleaner Stack. (3816R) (Part No: 168932)$198.00
Air Cleaner Stack, 15 Inch - Measuring 15 inches high with a three bolt mount, this Air Cleaner Stack fits John Deere B up to serial number 59999 (Part No: 179243)		$91.00
Air Cleaner Stack, 22 Inch - Measuring 22 inches high with a three bolt mount, this Air Cleaner Stack fits John Deere B up to serial number 59999 (Part No: 126380)		$92.00
Air Element Inner - Air cleaner element, inner. Dimensions for height: 14-1 4~outside diameter: 4-11 16~ inside diameter: 5 8 and 3-15 16. Use on Combines: 6620, 7720 for 466 diesel Turbo engine. For 4050, 4250, 4320, 4430, 4440, 4450, 6600, 6602, 6620, 7445, 7700, 7720 Replaces AR49840, AR61968, AR79680 (Part No: 126005)		$35.00
Air Element Inner - Air cleaner element, inner. Height 13-3 16 inches, outside diameter 3-7 8 inches, inside diameter 5 8 inch and 3-1 16 inch. Use on cotton picker: 9910, 9920. For 4030, 4040, 4050, 4230, 4240, 484, 7440, 9910, 9920. (Part No: 125857)$25.49
Air Element Outer - Air Cleaner element, outer. Dimensions for height: 17-1 16~outside diameter: 9-3 32~ inside diameter: 3 8 and 5-1 4. Used on Combine: 7720 for 466 diesel Turbo engine. For 4050, 4250, 4320, 4430, 4440, 4450, 6600, 6602, 6620, 7445, 7700, 7720 (Part No: 125888)		$55.00
Air Element Outer - Air cleaner element, outer. Height 15-5 16 inches, outside diameter 7-5 16 inches, inside diameter 3 8 inch and 3-31 32 inch. For tractor models 4030, 4040, 4050, 4230, 4240, 484, 7440, (9910, 9920 cotton pickers). (Part No: 125856)$48.75
Air Filter, Crankcase - For tractor models A, D, G. (Part No: 182545)		$26.54
Air Filter, Crankcase - For tractor models B, H. (Part No: 182547)		$25.26
Air Filter Door Assembly -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number AR61222< li> < UL> (Part No: 163470)
$766.00
Air Filter Door Catch -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R51023< li> < UL> (Part No: 163473)
$26.51
Air Filter, Inner - For tractor models (1020, 1030, 1120, 1130, 1630, 2020, 830, 930 SN# 190320 and up), (1040, 1140, 1640, 1840, 2040, 2040S, 2120, (1350, 1550, 1750, 1850, 1850N SN# up to 621999), 1830, 2030, 2130 SN# 115792 and up). (Part No: 114333)		$32.25
Air Filter, Inner - OD top 2.98", O.D. bottom 3.27", I.D. top closed, I.D. bottom 2.25", height 11.77". For tractor models (5200, 5300 with plastic air cleaner), (5210 up to SN# 121087), (5105, 5205 up to SN# 521999), (5103 up to SN# 009122), (5203 up to SN# 001465). Check dimensions before ordering. (Part No: 130153)		$45.88
Air Filter, Inner - OD top 2.55", O.D. bottom 3.13", I.D. top .66", I.D. bottom 2.15", height 10.05". For tractor models (5200, 5300 with metal air cleaner), 4475, 5575, 6675, 7775. Check dimensions before ordering. (Part No: 125881)		$25.00
Air Filter, Inner - OD top 3.40", O.D. bottom 3.63", I.D. top closed, I.D. bottom 2.50", height 13.36". For tractor models (5103 SN# 009123 and up), (5203 SN# 001466 and up), 5303, 5403, (5210 SN# 121008 and up), 5310, 5410, 5510, 5220, 5320, 5420, 5520. (Part No: 126029)		$27.25
Air Filter, Outer - For tractor models (1020, 1030, 1120, 1130, 1630, 2020, 830, 930 SN# 190320 and up), (1040, 1140, 1640, 1840, 2040, 2040S, 2120, (1350, 1550, 1750, 1850, 1850N SN# up to 621999), 1830, 2030, 2130 SN# 115792 and up). (Part No: 114332)		$48.25
Air Filter, Outer - OD 5.10", I.D. 3.20", height 12.30". For tractor models (5200, 5300 with plastic air cleaner), (5210 up to SN# 121087), (5105, 5205 up to SN# 521999), (5103 up to SN# 009122), (5203 up to SN# 001465). Check dimensions before ordering. (Part No: 123226)		$44.84
Air Filter, Outer - OD 6.45", I.D. top closed, I.D. bottom 3.61", height 13.91". For tractor models (5103 SN# 009123 and up), (5203 SN# 001466 and up), 5303, 5403, (5210 SN# 121008 and up), 5310, 5410, 5510, 5220, 5320, 5420, 5520. (Part No: 126028)		$46.76
Air Filter, Single - Fits the following tractors using a single air filter: (1020, 1030, 1120, 1130, 1630, 2020, 2120, 830, 930 All with SN# greater than 115792), (1830, 2030, 2130 All with SN# less than 115791). (Part No: 123198)		$26.75
Air Filter, with Fin - For tractor models (125, 170 skid steer loaders), 850, 950, 1050, (excavators 25, 30, 50). Replaces AH19847, AT31825, CH12767 (Part No: 123122)		$23.26
Air Filter, with Fin - For tractor models 650, 655, 750, 756. (Part No: 125791)$24.35
Air Intake System - Air Stack For Styled B (From SN# 60000). Replaces AB1463R, AB3641R. (Part No: 111046)		$66.95
Air Precleaner Assembly - For 520, 530, 620, 630, 720, 730. Air Precleaner Assembly. 7 Inch Diameter, 3 inch ID base. (3817R) (Part No: 109938)		$104.50
Air Precleaner Bowl - Clear plastic pre-cleaner bowl for air intake system. Dimension of bowl outside diameter at top: 10-1 2~ side height: 3~ cone inside diameter at top: 5-9 16~ overall height: 4. For diesel tractors: 4000, 4010, 4020, 5010, 5020 and 6030. For 4000, 4010, 4020, 5010, 5020, 6030 (Part No: 107972)		$9.16
Air Stack Adapter - For tractor models 720, 730. (Part No: 179064)		$74.00
Air Stack Adapter Plate - For model 730. (Part No: 116880)$11.99
Air Stack Muffler Spacer Block - For 620, 630, 720, 730. (Part No: 179448)		$51.00
Cable - Choke -
  • For John Deere tractor model 3020 (s n 123000-later)< li>
  • Replaces John Deere OEM number AR45735< li>
  • Length: 33"< li> < UL> (Part No: 161904)
$54.00
Cable - Choke -
  • For John Deere tractor models 3010, 3020 (s n 122999-later), 4000 (s n 201000-earlier), 4020 (s n 201000-earlier)< li>
  • Replaces John Deere OEM number AR50707, AR27312, AR45736< li>
  • Length: 40"< li> < UL> (Part No: 161905)
$26.76
Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On John Deere, it is used on the following Carburetors TSX85, TSX89, TSX245, TSX356, TSX475, TSX485, TSX491, TSX530, TSX615, TSX688, TSX756, TSX759, TSX777, TSX788, TSX802, TSX805, TSX806, TSX808, TSX809, TSX810, TSX812, TSX823, TSX860, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX907, TSX908, TSX908SL, TSX923SL, TSX941SL, TSX944, TSX945SL, TSX952SL, TSX953SL, TSXU838, TSXU1007, USX20, USX21, USX30, USX31, USX35, USX36, USX48SL, USX49SL, USX211. These carburetors are possible on John Deere Models: M, 600, MI, MT, 320, L, 500, LA, MC, 40, 330, 420, 430, 24, 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, 500A, 500B, 440A, LI, 440B, 99 Replaces: E10058, R10188 (Part No: 126116)		$6.60
Cable - Fuel Stop / Shutoff -
  • For John Deere tractor model 4230 (diesel, s n 012999-later)< li>
  • Replaces John Deere OEM number AR61973< li>
  • Length: 66"< li> < UL> (Part No: 161931)
$55.00
Cable - Fuel Stop / Shutoff, RE27897 -
  • For John Deere tractor model 4050 (w 6359TR Diesel Eng.)< li>
  • Replaces John Deere OEM number RE27897, RE24740< li>
  • Length: 74"< li> < UL> (Part No: 161934)
$32.60
Cable - Throttle -
  • For John Deere tractor models 4030, 4050 (s n 006510-ealier)< li>
  • Replaces John Deere OEM number AR93684< li>
  • Length: 86"< li> < UL> (Part No: 161994)
$86.10
Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: LA tractor with VD engine, LU, LUC, LUS Power units. Center to center on the 2 mounting bolts is 2 5 16 inches. Made in USA, 1 year warranty. The 14544 also replaces these other carburetors, 17A21, 09658AB, 10432, 10535, 10981, 10A2944, 11080, 11535, 12232, 12599, 12744, 13096, 13201, 13286, 13297, 13385, 13395, 14017, 14544, 224749, 239939, 700133GS, 9667, 9750, A38240, A38241, A38242, A38243, A38971, AL2848T, AL2849T, AL2958T, G11050, G11057, G11140, G45779, ILS393B, OS1548, R0093, TO12516, TO7715, TSX147, TSX193, TSX194, TSX225, TSX228, TSX237, TSX338, TSX356, TSX357, TSX365, TSX409, TSX497, TSX514, TSX597, TSX60, TSX603, TSX635, TSX663, TSX680, TSX681, TSX690, TSX694, TSX710, TSX762, TSX804, TSX85, TSX862, TSX90, TSX936, TSX936SL, TSX937, TSX937SL, TSX957, TSX957AL, TSX957SL, TSXU830, TSXU833, VTA4714 (Part No: 100751)$550.00
Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: 1520, 2030, 2510, 2520, 4030 tractors. Zenith Carburetor replaces numbers TSX394, TSX777, TSX944, TSX944SL, TSX945SL, TSX969SL, TSXU839, TSXU995. Does not include electric shut-off. Center to center on the 2 mounting bolts is 2 11 16 inches. Made in USA. 1 year warranty. (Part No: 100750)$540.00
Carburetor - This New carburetor replaces Marvel Schebler USX21, USX31, USX36, USX49sl, and Zenith numbers 12510, 12879, 13429, 14429, 14990, 15099. Mounting bolt spacing is 3-5 16 inches. Assembled in USA, 1 year warranty. (Part No: 104096)		$700.00
Carburetor - New carburetor with reversible linkage. For M, MC, MT (VD Engine serial number 1000up), 40, 77 Crawler, 300 (135G), 320, 330, 350 Crawler, 1020, 2010, 2020, 2500, 2510, Combines 45 (HA145, HA165D, 145GH, 180G4H Engine), 55 (HA217 gas), 95 (303G5H, 303G6H), 8x6 and 99 Cotton Pickers, NA217, 135 G Sprayer. Replaces Marvel -Schebler numbers TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX959. Center to center on the 2 mounting bolts is 2 11 16 inches. (Part No: 100752)$420.00
Carburetor - Features reversible linkage. This Zenith carburetor outperforms the original carbs used on: JD1010, 40 Combines gas. Replaces TSX802, TSX809, TSX860, TSXU834. Center to center on 2 mounting bolts is 2 5 16 inches. Made in USA, 1 year warranty. (Part No: 100748)$430.00
Carburetor - This new carburetor replaces Marvel Schebler USX20, USX29, USX30, USX32, USX33, USX35, USX37, USX44, USX45SL, USX47SL, USX48SL and Zenith numbers 13320, 13430, 13450, 13750, 14990 and 15099. Assembled in the US, 1 year warranty. Delivery 2 to 3 weeks. (Part No: 104097)		$659.90
Carburetor - Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX13, TSX45, TSX89, TSX91, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5 16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models L, LI. (Part No: 185128)$311.39
Carburetor - This New Carburetor is the Original Marvel-Schebler Design. It Replaces carburetor numbers TSX245 and TSX530. It will also replace TSX475 & TSX562 all-fuel distillate carburetors when converted to run on gasoline. 2-11 16 Inch center-to-center mounting bolt spacing. Used on John Deere M, MC, MI, MT, MTN, MTW, 320, 320S, 320U, 320V, 330, 330S, 330U, 330V, 40, 40C, 40H, 40S, 40T, 40U, 40V, 40W Replaces John Deere part numbers: AM1794T, AM366T, RE19402, Replaces all fuel when converted to gas: AM1613T, AM2067T. (Part No: 185127)		$389.99
Carburetor - This New Carburetor is Original Marvel-Schebler Design. Mounting bolts are 2-11 16 inches center to center. It Replaces Marvel Schebler TSX641 & TSX688. It will also replace TSX678 & TSX689 all-fuel distillate carburetors when converted to run on gasoline. Replaces John Deere Part Numbers AM3061T, AM3611T, RE19402 (Part No: 185673)		$359.00
Carburetor - This New Zenith Style Carburetor Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11 16 inches. (Part No: 183805)$290.00
Carburetor - Features reversible linkage. This Zenith style carburetor outperforms the original carbs used on: JD1010, 40 Combines gas. Replaces TSX802, TSX809, TSX860, TSXU834. Center to center on 2 mounting bolts is 2 5 16 inches. Import. 1 year warranty. (Part No: 184603)$291.00
Carburetor -
  • For John Deere tractor model A< li>
  • Replaces John Deere OEM number AA4056R, AA200R, AA2498R, AA3117R, AA3154R, AA3950R, AA580R, DLTX19, DLTX33, DLTX39, DLTX41, DLTX53, DLTX71, DLTX72, DLTX18< li>
  • Duplicate in original Marvel Schebler design< li>
  • For a Remanufactured version of this sku use Item #: 203269< li> < UL> (Part No: 149816)
$600.00
Carburetor - New Zenith with reversible linkage. This Zenith carburetor outperforms the original carbs used on:L, LI replaces Marvel-Schebler TSX13, TSX45, TSX89, TSX91, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. This Carb will NOT work if you have the Hercules engine. Center to center on the 2 mounting studs is 2 5 16 inches. Made in USA, 1 year warranty. (Part No: 100747)$470.00
Carburetor Bowl - Fits double barrel DLTX model Marvel Schebler carburetors DLTX101, DLTX102, DLTX105, DLTX106, DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99. For tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces 65-703, A5173R, AR10074R (Part No: 110992)		$42.50
Carburetor Bowl Nut - For DLTX51 Carburetor. Model G. (Part No: 180618)$24.76
Carburetor Bowl Nut -
  • For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number R10156< li> < UL> (Part No: 118925)
$42.50
Carburetor Bowl Nut Spring - A, B, D, (G DLTX24 Only), GP, (50 All fuel only up to serial number 5015950), (60 All fuel only up to Serial Number 6013899). Used on Marvel Schebler DLTX10, DLTX15, DLTX16, DLTX18, DLTX19, DLTX24, DLTX33, DLTX34, DLTX41, DLTX53, DLTX6, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73 Replaces John Deere Part Numbers: R10078, R10078R (Part No: 118930)		$4.50
Carburetor Choke Arm -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520< li>
  • Replaces OEM number T25158< li>
  • Marvel Schebler carburetors TSX904, TSX905, TSX944, TSX945< li> < UL> (Part No: 113489)
$227.00
Carburetor Choke Shaft -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere OEM number AT25819, T25149< li>
  • For Marvel Schebler Carburetor number TSX904, TSX905, TSX944, TSX945< li> < UL> (Part No: 110034)
$114.00
Carburetor Choke Shaft, DLTX - Carburetor Choke shaft and lever. For tractors: A, B, G, using Marvel-Schebler carburetor models: DLTX34, DLTX51, DLTX53. For 105, 1207, 1209, 1214, 1217, 1219, 130, 135, 1380, 1480, 183, 220, 230, 240, 330, 335, 375, 385, 430, 435, 45, 480, 483, 485, 530, 535, 55, 6602, 78, 95. (Part No: 110736)		$26.26
Carburetor - DLTX53, Remanufactured, Marvel Schebler, DLTX53 -
  • For John Deere tractor model A< li>
  • Replaces Marvel Schebler manufacturer number DLTX53< li> < UL> (Part No: 203268)
$485.01
Carburetor Elbow & Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1 8 inch pipe threads. Female end is 1 4 inch flair. (Part No: 110005)		$4.40
Carburetor Float - Made of cork used in Marvel Schebler DLTX3 ONLY. For model D. (Part No: 158447)		$58.00
Carburetor Float - For tractor models 50, 60, 70, 520, 530, 620, 720, 530, 630, 730. Carburetor Float. Replaces: AA4353R, AA5656R, AA6632R, AA6633R, AB4636R, AB4794R, AB5150R, AB5151R, AF1561R, AF1632R, AF2826R, AF2827R, AR10069R, 30-713. Used on the following carburetors: DLTS75, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99. Measures 66.3mm Long x 27mm Wide x 30mm Thick. (Part No: 108452)		$29.95
Carburetor Float - For model H. For Marvel Schebler Carburetors DLTX26 and DLTX46. (Part No: 111626)$33.99
Carburetor Float - For L, LA, LI, 1010 with Marvel-Schebler carburetors TSX13, TSX45, TSX60, TSX85, TSX89, TSX90, TSX91, TSX809, TSX860. Replaces 30-600. (Part No: 108449)$9.16
Carburetor Float - For tractor models M, MC, MT, 40, 320, 330, 420, 430, 440, 1020, 1520, 2010, 2020, 2030, 2510, 2520. All with Marvel-Schebler Carburetors: TSX245, TSX475, TSX530, TSX562, TSX641, TSX678, TSX688, TSX756, TSX808, TSX810, TSX899, TSX904, TSX904SL, TSX905, TSX905-1, TSX944SL, TSX945SL, TSXU963. Replaces OEM 30-739. (Part No: 105095)		$19.99
Carburetor Float - For 3010, 3020, 4000, 4010, 4020. Carburetor Float for Zenith. (Part No: 108455)		$23.26
Carburetor Float - For model 4030 with Marvel Schebler Carburetor. (Part No: 108451)$30.26
Carburetor Float, DLTX - For Early A, Early B, D, GP, G. Carburetor Float for use with DLTX10, DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX34, DLTX38, DLTX41, DLTX51, DLTX53, DLTX63. (Part No: 108457)		$23.99
Carburetor Float, DLTX - For A, AO, AR, B with Marvel-Schebler Carburetors DLTX13, DLTX67, DLTX71, DLTX72, DLTX73. (Part No: 108459)		$32.50
Carburetor Float Valve - Viton needle float valve. For Models: 500, 500A, 600, 3010, 3020, 4010, 4020 using USX Marvel Schebler. Also substitute for AR10105R. Replaces AR10114, AR10105. Used on Marvel Schebler carburetors. (Part No: 190748)		$11.96
Carburetor Gasket - 4-3/8" Center -
  • For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number A4631R< li> < UL> (Part No: 112218)
$3.26
Carburetor Gasket - 4-5/8" Center -
  • For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number A4634R< li> < UL> (Part No: 112219)
$3.26
Carburetor Gaskets -
  • For John Deere tractor model D< li>
  • For Marvel Schebler carburetor numbers: DLTX3< li>
  • Contains: Air Intake, Manifold Mounting, Fuel Bowl, Seat, Bowl Nut Gaskets< li> < UL> (Part No: 121762)
$12.26
Carburetor Gasket Set - Used on carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For 3010, 3020, 4010, 4020. (Part No: 182911)		$4.96
Carburetor Gasket Set - This Carburetor Gasket Set is used on Marvel Schebler Carburetors: DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U (Part No: 182522)		$5.00
Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4-5 16 inch. L, LA, 1010, LI with the follwing carburetors:TSX13, TSX356, TSX45, TSX60, TSX653, TSX802, TSX809, TSX85, TSX860, TSX89, TSX90, TSX91, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Part No: 182465)		$2.66
Carburetor Kit -
  • For John Deere tractor models A, B, D, G< li>
  • For Marvel Schebler carburetor numbers: DLTX5, DLTX6, DLTX8, DLTX10, DLTX11, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX41, DLTX51, DLTX53, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73, DLTX107U, DLTX108U< li>
  • Includes Gaskets, Needle & Seat< li> < UL> (Part No: 100736)
$24.50
Carburetor Kit -
  • For John Deere tractor models 1020, 1520, 2020, 2510, 2520< li>
  • Replaces John Deere OEM number A609073< li>
  • For Marvel Schebler Carburetor number TSX904, TSX905, TSX944, TSX945< li>
  • Kit contains gaskets and float valve< li> < UL> (Part No: 176624)
$22.00
Carburetor Kit -
  • For John Deere tractor model 2010< li>
  • Replaces John Deere OEM number AT11680T< li>
  • Replaces Marvel Schebler manufacturer number TSX810< li>
  • Basic Carburetor Kit includes: Gaskets, Float Valve, and Throttle Shaft< li> < UL> (Part No: 176645)
$33.00
Carburetor Kit -
  • For John Deere tractor models M, MC, MT, 40, 320< li>
  • Replaces Marvel Schebler manufacturer number MSCK49< li> < UL> (Part No: 181519)
$32.00
Carburetor Kit, Basic - Kit for Marvel TSX809, TSX860, TSX13, TSX45, TSX91, TSX89, TSX60, TSX85, TSX90 carbs used on 1010, L, LA. (Part No: 100733)		$20.00
Carburetor Kit, Basic - Kit for Marvel TSXU963, TSX904SL, TSX904, TSX944, TSX944SL, TSX810, TSX808, TSX899, TSXU9631, TSX905, TSX905-1, TSX945SL, TSX475, TSX530, TSX245, TSX562, TSX641, TSX679, TSX688, TSX689, TSX678 carbs used on 1020, 1520, 2010, 2020, 2030, 2510, 2520, 320, 40, 420, 430, M. (Part No: 100734)		$21.00
Carburetor Kit, Basic - Kit for Zenith 14997 carb on 2030, 4030. (Part No: 100744)		$34.00
Carburetor Kit, Basic - Kit for Zenith 12510, 13429, 12879, 13320, 13450, 13430 carbs on 3010, 3020, 4020. John Deere Carb: AR34243, AR45161, AR45162, AR52450, AR55368 (Part No: 100743)		$35.26
Carburetor Kit, Basic - Kit for Marvel TSX969SL carb used on 4030. (Part No: 100735)		$20.00
Carburetor Kit, Basic - Kit for Marvel DLTX75, DLTX83, DLTX86, DLTX96, DLTX105, DLTX99, DLTX81, DLTX84, DLTX82, DLTX102, DLTX97, DLTX94, DLTX106, DLTX85, DLTX101, DLTX98, DLTX95 carbs used on 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 100737)		$23.50
Carburetor Kit, Basic - Kit for Marvel DLTX18, DLTX38, DLTX41, DLTX53, DLTX71, DLTX72, DLTX19, DLTX24, DLTX39, DLTX51, DLTX10, DLTX34, DLTX67, DLTX73, DLTX3, DLTX63, DLTX6, DLTX31, DLTX8, DLTX11, DLTX13, DLTX5, DLTX16, DLTX15, DLTX17, carbs used on A, B, D, G, GP. (Part No: MS104)		$52.33
Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models L, LI (Part No: 186565)		$39.01
Carburetor Kit, Basic -
  • For John Deere tractor models 420 (with Marvel Schebler TSX641, TSX678, OEM# AM3611T), 420 (with Marvel Schebler TSX641-678)< li>
  • Replaces manufacturer number VPD3678< li>
  • Kit contains gaskets, float valve & throttle shaft< li> < UL> (Part No: 176654)
$29.00
Carburetor Kit, Comprehensive - This comprehensive carburetor rebuild kit is made to service the original Marvel-Schebler design and fits the following tractor models: B. It is being used for carburetors with the numbers matching: DLTX67 and DLTX73. (Part No: 184242)		$136.20
Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler # TSX245. For John Deere 320, 330, M, MC and MT tractors. The kit contains all the parts shown. (Part No: 182524)		$59.00
Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler # TSX475. For John Deere model 320, 330, M, MC and MT tractors. The kit contains all the parts shown. (Part No: R7899)		$54.51
Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler # TSX530. For John Deere model 40, M, MC and MT tractors. The kit contains all the parts shown. (Part No: 182526)		$59.00
Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler # TSX860. For John Deere 1010 tractors. The kit contains all the parts shown. (Part No: 184243)		$56.00
Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For Marvel-Schebler numbers: TSX688, TSX689. For John Deere 420 and 430 tractors. Contains all the parts shown. (Part No: 168706)		$62.99
Carburetor Kit, Comprehensive - Comprehensive Carburetor Kit For Marvel-Schebler #s: TSX810, TSX899. For John Deere 2010 tractors. Contains all the parts shown. (Part No: 182476)		$59.00
Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Marvel Schebler carburetor DLTX95. It contains all parts shown. Verify carburetor number before ordering. (Part No: 183893)		$183.83
Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Marvel Schebler DLTX99 carburetors. The kit contains all the parts shown. Verify carburetor numbers before ordering. (Part No: 187004)		$193.39
Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Zenith Carb#: 12510, 12879, 14990 (4-Cyl JD Only), 15099 (4-Cyl JD Only), 15107. The kit contains all the parts shown. (Part No: 184529)		$234.99
Carburetor Long Jet Nozzle -
  • For John Deere tractor models 3010, 3020 (s n: 122999-earlier), 4010, 4020 (s n: 200999-earlier)
  • Replaces John Deere OEM number R10220, AR10102, AR39831< li> < li>
  • Compatible with Minneapolis Moline tractor models G900, G1000
  • Replaces Minneapolis Moline OEM number 10P3214< li> < li>
  • Compatible with Oliver tractor models 90, 1750, 1755, 1800, 1850, 1855, 1900< li>
  • Replaces Oliver OEM number 156663A< li>
  • For Marvel Schebler Carburetor number USX29, USX32, USX37, USX44, USX21, USX31, USX35, USX36, USX49, USX20, USX30, USX33, USX40, USX45, USX47, USX48< li>
  • Length: 2-1 4" (2.25")< li>
  • For short (1-3 4") jet nozzle use Item #: 111920< li> < UL> (Part No: 113814)
$71.00
Carburetor Needle -
  • For John Deere tractor model D< li>
  • For Marvel Schebler carburetor numbers: DLTX3< li> < UL> (Part No: 121761)
$40.76
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX24, DLTX33, DLTX53. For the following tractor models: A (Serial Numbers 488000 - 583999). Add $150.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Part No: 209944)$365.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX13, TSX45, TSX89, TSX91, TSX356. For the following tractor models: L. Add $75.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Part No: 204518)$288.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX60, TSX85, TSX90, TSX356. For the following tractor models: LA, LI. Add $75.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Part No: 204518)$288.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX777, TSX768, TSX756. For the following tractor models: 40, 420, 440. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 205428)$351.20
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX641, TSX653, TSX678, TSX688, TSX689, TSX808, TSX810, TSX899, TSXU963. For the following tractor models: 420 and 430. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 203294)$370.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX809, TSX860. For the following tractor models: 1010. Center-to-Center on the mounting bolts is 2 3 8 inches. Add $75.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 203291)$410.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX810, TSX899, TSX904. For the following tractor models: 2010. The Center-to-Center measurement on the mounting bolts is 2 11 16 inches. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 203294)$370.01
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 10946. For the following tractor models: 40. Add $75.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Part No: 205227)$510.01
Carburetor, Remanufactured, Marvel Schebler, DLTX33 -
  • For John Deere tractor model A< li>
  • Replaces Marvel Schebler manufacturer number DLTX33< li> < UL> (Part No: 203266)
$455.01
Carburetor Repair Kit - Basic carburetor repair kit contain needle float valve, throttle shaft, float lever shaft and gasket set CGK35. Sold with stainless steel, hard chrome needle. Carburetor manufacture number DLTX63 and tractor manufacture carburetor numbers AD830R and AD2544 For D (Part No: 121862)		$46.00
Carburetor Repair Kit - Basic carburetor repair kit contain needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture numbers: DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX33, DLTX41, DLTX51. For A, G, GM, GP (Part No: 121862)		$46.00
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Available with VITON needle float valve. Carburetor manufacture numbers: DLTX75, DLTX83, DLTX86, DLTX96, DLTX99, DLTX105, tractor manufacture carburetor number: AB479R. For 50, 520, 530. YTO BK33V (Part No: 121600)		$39.95
Carburetor Repair Kit - Basic carburetor repair kit contain needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture number DLTX53 and AA3154R. For model A. (Part No: 121863)		$46.00
Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture numbers: DLTX71, DLTX72 and AA3950R, For A (Part No: 184443)		$45.39
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Comes with VITON needle float valve. Carburetor manufacture numbers: DLTX81, DLTX82, DLTX84, DLTX85 and AA5344R, For 60, 620, 630, 70, 720, 730 (Part No: 121236)		$52.00
Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture number DLTX10, AB237R. For model B. (Part No: 112437)		$23.50
Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture number DLTX34, AB2711R. For B (Part No: 112437)		$23.50
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Marvel Schebler numbers: TSX809, TSX860 and John Deere carburetor numbers: AT16966T, AT16332T. For model 1010. (Part No: 114473)		$36.80
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For tractor models: 4010, 4020. For 4010, 4020 (Part No: 121870)		$46.00
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number USX21, USX31, USX36, USX49SL. Tractor manufacture carburetor numbers AR34242R, AR28636R. For tractor models: 3010, 3020. For 3010, 3020 (Part No: 121871)		$58.00
Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number TSX810 and tractor manufacture carburetor number AT11680T. For 2010 (Part No: 108464)		$43.76
Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture numbers: DLTX67, DLTX73, AB3533R, For B (Part No: 112363)		$30.10
Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture numbers: DLTX26, DLTX46, AH523R. For tractor models: H, HN. For H, HN (Part No: 121866)		$23.60
Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, float lever shaft and gasket set. Available with VITON needle float valve. Carburetor manufacture numbers: TSX245, TSX475, TSX530. On models: 320, 40, M, MC, MT. (Part No: 112440)		$21.76
Carburetor Throttle Lever - For tractor models: A, B, G. Fits Marvel Schebler carbs DLTX8, DLTX18, DLTX24, DLTX33, DLTX34, DLTX51, DLTX53. Replaces AR10026R. (Part No: 182805)		$52.00
Check Valve -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 4049R, 4320, 4520, 4720, 5065M, 5075M, 5076E, 5076EN, 5082E, 5083E, 5085E, 5085M, 5090E, 5090EH, 5090EL, 5090EN, 5090M, 5090R, 5093E, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5100ML, 5100R, 5105M, 5105ML, 5115M, 5115ML, 5115R, 5125ML, 5125R, 5215, 5215F, 5215V, 5220, 5225, 5315, 5315F, 5315V, 5320, 5325, 5415, 5420, 5425, 5515, 5515V, 5520, 5525, 5620, 5625, 5720, 5725, 5820, 6010, 6020, 6100, 6100D, 6110, 6110D, 6110E, 6110L, 6115D, 6120, 6120E, 6120L, 6125D, 6125E, 6130D, 6135E, 6140D, 6140J, 6155J, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6500, 6500L, 6505, 6506, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6600, 6603, 6605, 6610, 6615, 6620, 6715, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 7220, 7320, 7420, 7425, 7520, 7525< li>
  • Replaces John Deere OEM number AL117189< li>
  • I.D. .315"< li>
  • O.D. .315"< li>
  • Length: 2.421"< li> < UL> (Part No: 168920)
$15.50
Choke Cable - Total Length 47" (replaces AT13452, AM1799T, AT12896), Fits, 1010, 2010, 320, 330, 40, M, MC, MT. (Part No: 121224)		$22.99
Choke Cable - 34.5" total length. For tractor models 1020, 1520. (Part No: 161907)$33.60
Choke Cable - 37" total length. For tractor models 2020, 2030, 2520. (Part No: 161906)$34.90
Choke Cable - Universal choke cable 72 inches long, 7 16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: 178125)		$17.00
Choke Cable -
  • For John Deere tractor models 2510, 4020< li>
  • Replaces OEM number AR27301< li>
  • Total Length: 44"< li> < UL> (Part No: 155432)
$61.40
Choke Knob - For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: 109932)$9.95
Choke Rod - For model A electric start from SN# 477000 to 583999. (Part No: 179654)$33.50
Choke Rod - For model G electric start from SN# 13000 and above. (Part No: 179658)$33.50
Choke Rod - For Model: A from s n 643750 to 662728. (Part No: 179667)$30.26
Choke Rod - For Model: A from s n 662729 and up. (Part No: 179903)$37.76
Choke Rod - For Model: B from s n 258520 and up. (Part No: 179116)$33.50
Choke Rod - For Model: H with electric start from s n 27000 and up. (Part No: 179119)$28.76
Choke Rod - For tractor models: (50 from s n 5030600 and up with propane), (520, 530 propane. Replaces B3953R, R20517R. (Part No: 179968)$42.76
Choke Rod - For Model: 60 gas. (Part No: 179867)$59.60
Choke Rod - For Model: 620 gas and all-fuel. (Part No: 179666)$30.26
Choke Shaft Assembly Cast Zenith Deere -
  • For John Deere tractor models 500, 600, 3010 (s n 049999-earlier), 3020, 4000 (s n 201000-later), 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 500 (s n 123113-earlier)< li>
  • Replaces John Deere OEM number AR13026< li>
  • Zentih 13429, 13430< li> < UL> (Part No: 118739)
$160.00
Common Rail to Fuel Injector Fuel Line -
  • For John Deere tractor models 5085M, 5090M, 5090R, 5100E, 5100M, 5100MH, 5100ML, 5100R, 5115M, 5115ML, 5115R, 5125R, 6090MC, 6090RC, 6100MC, 6100RC, 6105D, 6105M, 6105R, 6110MC, 6110RC, 6115D, 6115M, 6115R, 6125M, 6125R, 6130D, 6130M, 6130R, 6140D, 6140M< li>
  • Compatible with John Deere Construction & industrial models 130G, 160GLC, 180GLC, 210K, 310K, 310SK, 410K, 410KTC, 444K, 550K, 605K, 650K< li>
  • Replaces John Deere OEM number RE543300< li> < UL> (Part No: 189096)
$33.00
Donaldson Style Pre -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Painted Green< li>
  • For 3" O.D. Pipe< li>
  • Comes Without Screen< li> < UL> (Part No: 109937)
$79.99
Fiber Washer - Idler -
  • For John Deere tractor models 3010 (Grove & Orchard, Row-Crop Standard & Utility Tractors), 3020 (s n 122999-earlier, Utility), 3020 (s n 123000-later), 4000 (s n 201000-later), 4010, 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4230, 5010, 5020 (s n 024999-earlier), 5020 (s n 025000-later)< li>
  • Replaces John Deere OEM number R26402< li> < UL> (Part No: 146688)
$7.70
Float - Brass -
  • For John Deere tractor model D< li>
  • For Marvel Schebler carburetor numbers: DLTX3< li>
  • For Cork Version use Item #: 158447< li> < UL> (Part No: 118528)
$83.00
Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5 8 inch outside diameter, is 1 3 4 inches tall, and a 3 4 inch bottom hole. It is used on John Deere (820 3 cylinder), 920, 1020, 1120, 1520, 300, 300B, 301, 301A, 302, 302A, 310B, 350, 350B, 380, (2020, 2120 Europe), 3120. Replaces original part number R56434 (Part No: 112513)$4.36
Fuel Cable -
  • For John Deere tractor models 3150, 3155< li>
  • Replaces John Deere OEM number AL41325< li>
  • Overall Length: 82"< li> < UL> (Part No: 121220)
$29.20
Fuel Cap - Unstyled (no lettering), 2-11 16" I.D. x 5 8" Height. For tractor models A, B, D, G (Part No: 126515)		$13.50
Fuel Cap - For plastic fuel tanks. 2 5 16" opening. Replaces OEM AL34678. For tractor models 840, 940, 1040, 1140, 1350, 1550, 1750, 1850, 1950, 1640, 1840, 2040, 2150, 2350, 2550, 2650, 2750, 2850, 2355, 2555, 2755, 2855, 2940, 3040, 3140, 3640, 2950, 3050, 3150, 3350, 3650, 2955, 3055, 3155 and 3255. (Part No: 113550)		$19.00
Fuel Cap, Triple Baffle - For tractor models M, 320 up to SN# 325107, 420 to SN# 126976. Cap measures 2 1 8 inches tall, two tab locking fingers to fit in a 1 9 16 inch I.D. fuel pipe. (Part No: 179506)		$26.50
Fuel Cap, Vented - For tractor models A, B, G, H, 50, 60, 70, Says Buy Clean Fuel, Keep it Clean . 2 notch cap for a 2 inch tank inlet. Replaces AD709R (Part No: 107951)		$5.76
Fuel Cap with Red Rubber Cover -
  • For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010< li>
  • Compatible with John Deere Construction & industrial models 400, 440 (Crawler), 440, 480 (Loader Backhoe)< li>
  • Replaces John Deere OEM number R27183, AT20911< li>
  • Includes red rubber cover and gasket< li>
  • Red rubber cover outer diameter: 4.040"< li>
  • 1.775" tang-to-tang length< li>
  • 0.250" tang width< li>
  • 1.455" inside center diameter< li>
  • Cap is 1.375" tall< li>
  • For replacement cover use Item #: 126626< li> < UL> (Part No: 126517)
$29.95
Fuel Control Rod - For tractor models: (A electric start from s n 497590 to 583999), (AR electric start up to s n 259999), (G from s n 13000 and up). (Part No: 179151)		$38.26
Fuel Control Rod - For Model: B electric start from s n 60000 to 94493. (Part No: 180654)$54.00
Fuel Cooler -
  • For John Deere Construction & industrial models 210, 315, 410, 710< li>
  • Replaces John Deere OEM number AT420970< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 160236)
$532.30
Fuel Cooler -
  • For John Deere Construction & industrial models 310K, 310SKTC, 410K, 410KTC< li>
  • Replaces John Deere OEM number AT440359< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 160248)
$248.10
Fuel Filler Cap -
  • For John Deere tractor models 6090MC, 6090RC, 6100MC, 6100RC, 6105M, 6105R, 6110M, 6110MC, 6110RC, 6115M, 6115R, 6125M, 6125R, 6130M, 6130R, 6140M, 6140R, 6150M, 6150R, 6150RH, 6155M, 6170M, 6170R, 6175M, 6190R, 6195M, 6210R< li>
  • Replaces John Deere OEM number AL212915, AL210382< li> < UL> (Part No: 179460)
$20.30
Fuel Filler Grommet - 2-1 2" I.D., 4-1 2 O.D.. For tractor models early 50, 60, 70 and 60, 620, 630 orchard models. (Part No: 126663)		$23.95
Fuel Filler Grommet - For tractor models 330, 430. (Part No: 179491)		$19.95
Fuel Filter - Fuel filter element, spin-on type, for diesel tractors with dual filters. Models: 3020, 4020, 5010, 5020. (Part No: 111143)		$14.99
Fuel Filter - 2.717" tall. For tractor models 650, 670, 750, 770. (Part No: 181544)$10.00
Fuel Filter - 3.49" tall. For Yanmar built models 1050, 2500, 2653, 4200, 4300, 4400, 655, 755, 756, 770, 790, 850, 855, 856, 950. Replaces HA13040000A4, FEM4108, CH10479, M801101, 16271-43560, 1627143560, L4103F, 124550-55700, 12455055700 (Part No: 120083)		$10.59
Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Part No: 179323)		$16.50
Fuel Filter Canister - 2 required per tractor. For tractor models R, 70, 80, 720, 730, 820, 830. Diesels. (Part No: 182539)		$34.76
Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7 16 inches outside diameter and 2 3 4 inch tall. (Part No: 158868)		$8.49
Fuel Filter Repair Kit -
  • For John Deere tractor models A (s n 584000-later, automatic shut off), 50 (s n 5016133-later, automatic shut off), 60 (s n 6028469-later, automatic shut off), 70 (s n 7006494-later, automatic shut off), 80 (diesel with Pony start), 520 (automatic shut off), 530 (automatic shut off), 620 (automatic shut off), 630 (automatic shut off), 720 (gas diesel), 730 (gas diesel), 820 (diesel with Pony start), 830 (diesel with Pony start), 840 (diesel with Pony start)< li>
  • Replaces John Deere OEM number A4978R, A4983R, AA4297R, C1778R< li>
  • Contains: Diaphragms, washer, screen, gasket< li> < UL> (Part No: 127447)
$21.76
Fuel Hand Pump -
  • For John Deere tractor models 4050, 4055, 4250, 4440, 4450, 4455, 4640, 4650, 4755, 4760< li>
  • Compatible with John Deere Combine(s) 6620, 6622, 7700, 8820< li>
  • Compatible with John Deere Harvester(s) 5440, 5720, 9950< li>
  • Compatible with John Deere Construction & industrial models 644C, 644D, 644E, 646C, 690B, 690C, 690CR, 693C, 740A, 743, 743A, 762A, 762B, 770A, 770AH, 770B, 772A, 772AH, 772B, 790D, 850B< li>
  • Replaces John Deere OEM number RE20042, AR89956, RE27848, RE12386< li> < UL> (Part No: 161804)
$144.00
Fuel Hose -
  • For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6220, SE6310, SE6320, SE6410, SE6420, SE6510, SE6520, SE6610, SE6920, 5620, 5720, 5820, 6010, 6020, 6110, 6110L, 6120, 6120L, 6140J, 6155J, 6205, 6210, 6210L, 6215, 6220, 6220L, 6310, 6310L, 6310S, 6320, 6320L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6425, 6505, 6510, 6510L, 6510S, 6515, 6520, 6520L, 6605, 6610, 6620, 6715, 6810, 6820, 6910, 6910S, 6920, 6920S, 7220, 7320, 7420, 7425, 7520, 7525< li>
  • Replaces John Deere OEM number RE502248< li>
  • Thread Size: 1 2" - 20 UNF< li> < UL> (Part No: 162600)
$15.50
Fuel Injection Nozzle Kit -
  • For John Deere Construction & industrial model 444J (Loader)< li>
  • Replaces John Deere OEM number SE501103< li> < UL> (Part No: 166804)
$79.00
Fuel Injection Pump, Remanufactured, AR26372, AR26372R, SE500874, Roosa Master -
  • For John Deere tractor models 4010, 4020 (S N 200999-earlier)< li>
  • Replaces John Deere OEM number AR26372, AR26372R, SE500874< li>
  • Replaces Roosa Master manufacturer number DBGVC631-1AJ, DBGVC631-11AF, DBGVC631-3AF, DBGVC631-4AF< li>
  • Use with Advanced Housing< li> < UL> (Part No: 200690)
$1050.01
Fuel Injection Pump, Remanufactured, AR26509, DBGVC429-8AJ -
  • For John Deere tractor models 3010, 3020 (s n 122999 - Later)< li>
  • Replaces John Deere OEM number AR26509, DBGVC429-8AJ< li> < UL> (Part No: 205061)
$1050.01
Fuel Injection Pump, Remanufactured, AR26509, SE500545, Roosa Master, DBGVC429-3AF -
  • For John Deere tractor models 500, 3010, 3020 (s n 122999-earlier)< li>
  • Replaces John Deere OEM number AR26509, SE500545< li>
  • Replaces Roosa Master manufacturer number DBGVC429-3AF, DBGVC429-4AF, DBGVC429-5AF< li> < UL> (Part No: 200701)
$1050.01
Fuel Injection Pump, Remanufactured, AR32564, SE500547, Roosa Master, DBGVC633-5AJ -
  • For John Deere tractor models 600 (s n 214999-earlier), 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number AR32564, SE500547< li>
  • Replaces Roosa Master manufacturer number DBGVC633-5AJ, DBO-1578, DBGVC633-1AJ< li> < UL> (Part No: 200682)
$1050.01
Fuel Injection Pump, Remanufactured, AR36877 -
  • For John Deere tractor models 5020, 6030< li>
  • Replaces John Deere OEM number AR36877< li>
  • Roosa pump # DBGFC637-50AJ< li> < UL> (Part No: 204636)
$1050.01
Fuel Injection Pump, Remanufactured, AR41625, Roosa Master, CBC431-1AL -
  • For John Deere tractor model 3020 (s n 125000-132165)< li>
  • Replaces John Deere OEM number AR41625< li>
  • Replaces Roosa Master manufacturer number CBC431-1AL, CBC431-7AL< li> < UL> (Part No: 200694)
$1475.01
Fuel Injection Pump, Remanufactured, AR41626, Roosa Master, CBC633-1AL -
  • For John Deere tractor models 600, 4000 (Power Shift s n 201000-246722)(Syncro-Range s n 201000-253763), 4020 (Power Shift s n 201000-246722)(Syncro-Range s n 201000-253763)< li>
  • Replaces John Deere OEM number AR41626< li>
  • Replaces Roosa Master manufacturer number CBC633-1AL, CBC633-18AL< li> < UL> (Part No: 200695)
$1475.01
Fuel Injection Pump, Remanufactured, AR48682, Roosa Master, CBC431-8AL -
  • For John Deere tractor model 3020 (s n 132166-280000 with stub pipes)< li>
  • Compatible with John Deere Construction & industrial model 500A (s n 125000-280000 with stub pipes), 500B (s n 125000-280000 with stub pipes)< li>
  • Replaces John Deere OEM number AR48682< li>
  • Replaces Roosa Master manufacturer number CBC431-8AL< li> < UL> (Part No: 200696)
$1475.01
Fuel Injection Pump, Remanufactured, AR48684, Roosa Master, CDC633-24AL -
  • For John Deere tractor models 600 (s n 246723-later, Collar Shift), 4000 (s n 253764-later, Syncro-Range), 4020 (s n 253764-later, Syncro-Range)< li>
  • Replaces John Deere OEM number AR48684< li>
  • Replaces Roosa Master manufacturer number CDC633-24AL< li> < UL> (Part No: 200728)
$1475.01
Fuel Injection Pump, Remanufactured, AR48803, Roosa Master, CBC633-28AL -
  • For John Deere tractor models 600 (s n 246723-later, Power Shift), 4000 (s n 246723-280000, Power Shift)(s n 253764-280000, Syncro-Range), 4020 (s n 246723-280000, Power Shift)(s n 253764-280000, Syncro-Range)< li>
  • Replaces John Deere OEM number AR48803< li>
  • Replaces Roosa Master manufacturer number CBC633-28AL< li> < UL> (Part No: 200683)
$1475.01
Fuel Injection Pump, Remanufactured, AR50003, SE500554, Roosa Master, JDB-2400 -
  • For John Deere tractor model 4320< li>
  • Compatible with John Deere Engine(s) 6404T< li>
  • Replaces John Deere OEM number AR50003, SE500554< li>
  • Replaces Roosa Master manufacturer number JDB-2400< li> < UL> (Part No: 200761)
$1050.01
Fuel Injection Pump, Remanufactured, AR50144, SE500548, Roosa Master, JDB-2401 -
  • For John Deere tractor models 500 (s n 068000-later), 510 (s n 068000-later), 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 280001-later), 500B (s n 280001-later), 500C (s n 068000-later)< li>
  • Replaces John Deere OEM number AR50144, SE500548< li>
  • Replaces Roosa Master manufacturer number JDB-2401, JDB-2801< li> < UL> (Part No: 200769)
$1050.01
Fuel Injection Pump, Remanufactured, AR50145, SE501244, Roosa Master, JDB-2402 -
  • For John Deere tractor models 4000 (s n 208001-later), 4020 (s n 208001-later)< li>
  • Replaces John Deere OEM number AR50145, SE501244< li>
  • Replaces Roosa Master manufacturer number JDB-2402< li>
  • Factory JDB Install< li> < UL> (Part No: 200727)
$1050.01
Fuel Injection Pump, Remanufactured, AR50147, SE501244, Roosa Master, JDB-2404 -
  • For John Deere tractor models 4000 (s n 280001-later), 4020 (s n 280001-later)< li>
  • Replaces John Deere OEM number AR50147, SE501244< li>
  • Replaces Roosa Master manufacturer number JDB-2404, JDB633-2404< li>
  • Both Power Shift and Syncro-Range< li>
  • Latest Factory Powershift< li> < UL> (Part No: 200729)
$1050.01
Fuel Injection Pump, Remanufactured, AR51747 -
  • For John Deere tractor model 2030< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Compatible with John Deere Engine(s) 4219< li>
  • Compatible with John Deere Hay Cutting(s) 2250, 2270< li>
  • Replaces John Deere OEM number AR51747< li>
  • "This is a remanufactured pump"< li>
  • For 219 engine< li> < UL> (Part No: 203796)
$1275.01
Fuel Injection Pump, Remanufactured, AR57253, Roosa Master, DM2-2580 -
  • For John Deere tractor model 4230< li>
  • Compatible with John Deere Combine(s) 6600 (s n 422365-499999), 7700< li>
  • Replaces John Deere OEM number AR57253, AR58979, SE500549< li>
  • Replaces Roosa Master manufacturer number DM2-2580, DM2-2589, DM2-2870< li> < UL> (Part No: 200732)
$1200.01
Fuel Injection Pump, Remanufactured, AR61681, Roosa Master, JDB-2594 -
  • For John Deere tractor models 2840 (Engine s n ending in "T"), 4030< li>
  • Replaces John Deere OEM number AR61681< li>
  • Replaces Roosa Master manufacturer number JDB-2594< li> < UL> (Part No: 200776)
$1925.01
Fuel Injection Pump, Remanufactured, AR69412, Roosa Master, JDB-2722 -
  • For John Deere tractor model 3020 (Field Update of CB)< li>
  • Compatible with John Deere Construction & industrial model 500A (Field Update of CB), 500B (Field Update of CB)< li>
  • Replaces John Deere OEM number AR69412< li>
  • Replaces Roosa Master manufacturer number JDB-2722< li> < UL> (Part No: 200770)
$1050.01
Fuel Injection Pump, Remanufactured, AR69413, SE500551, Roosa Master, JDB-2721 -
  • For John Deere tractor models 600 (s n 215000-later, Collar Shift), 4000 (s n 215000-246722, Syncro-Range)(s n 21500-253763, Power Shift), 4020 (s n 215000-246722, Syncro-Range)(s n 21500-253763, Power Shift)< li>
  • Replaces John Deere OEM number AR69413, SE500551< li>
  • Replaces Roosa Master manufacturer number JDB-2721, JDB633-2721< li>
  • CB Conversion Pump< li> < UL> (Part No: 200730)
$1050.01
Fuel Injection Pump, Remanufactured, AR69414, Roosa Master, JDB633-2719, JDB-2719 -
  • For John Deere tractor models 600 (s n 215000-later, Power Shift), 4000 (s n 246723-280000, Power Shift)(s n 253764-280000, Syncro-Range), 4020 (s n 246723-280000, Power Shift)(s n 253764-280000, Syncro-Range)< li>
  • Replaces John Deere OEM number AR69414< li>
  • Replaces Roosa Master manufacturer number JDB633-2719, JDB-2719< li>
  • Field Update of CB Powershift< li> < UL> (Part No: 200731)
$1050.01
Fuel Injection Pump, Remanufactured, AR73524, Roosa Master, DM4-2982 -
  • For John Deere tractor model 4230< li>
  • Replaces John Deere OEM number AR73524< li>
  • Replaces Roosa Master manufacturer number DM4-2982, DM4629-2982< li> < UL> (Part No: 200733)
$1200.01
Fuel Injection Pump, Remanufactured, AR80372, RE10311, SE500571, SE500929, Roosa Master -
  • For John Deere tractor model 4040< li>
  • Replaces John Deere OEM number AR80372, RE10311, SE500571, SE500929< li>
  • Replaces Roosa Master manufacturer number DM4-3143, DM4-4040< li> < UL> (Part No: 200711)
$1200.01
Fuel Injection Pump, Remanufactured, AR94199, Roosa Master, DM4-3085 -
  • For John Deere tractor model 4230< li>
  • Replaces John Deere OEM number AR94199< li>
  • Replaces Roosa Master manufacturer number DM4-3085< li> < UL> (Part No: 200734)
$1200.01
Fuel Injection Pump, Remanufactured, AR98777, Roosa Master, DM4-3273 -
  • For John Deere tractor model 4040< li>
  • Replaces John Deere OEM number AR98777, AR71460< li>
  • Replaces Roosa Master manufacturer number DM4-3273, DM4-2794< li> < UL> (Part No: 200712)
$1200.01
Fuel Injection Pump, Remanufactured, Bosch, 0-400-876-394, RE51026 -
  • For John Deere tractor model 4455 (s n 178823-later)< li>
  • Compatible with John Deere Engine(s) 6076 (s n 499999-earlier)< li>
  • Replaces John Deere OEM number RE51026, RE36655, RE29182, SE500175< li>
  • Replaces Bosch manufacturer number 0-400-876-394, 0-400-876-350< li> < UL> (Part No: 200748)
$1900.01
Fuel Injection Pump, Remanufactured, Bosch, 0-400-876-399, RE51910 -
  • For John Deere tractor model 4255< li>
  • Replaces John Deere OEM number RE51910, RE29303, RE36656, SE500172, SE500173, SE500461< li>
  • Replaces Bosch manufacturer number 0-400-876-399, 0-400-876-357, 0-400-876-351, 9-400-230-117, 0-400-876-353, PES6A-RS2754, PES6A-RS2522-2< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 207297)
$1900.01
Fuel Injection Pump, Remanufactured, Bosch, 0-402-196-701, RE47941 -
  • For John Deere tractor model 8760< li>
  • Replaces John Deere OEM number RE47941, RE37385, RE41129, SE500485< li>
  • Replaces Bosch manufacturer number 0-402-196-701< li> < UL> (Part No: 200772)
$3025.01
Fuel Injection Pump, Remanufactured, Bosch, 0-402-196-702, RE524478 -
  • For John Deere tractor models 4955, 4960, 8560, 8570< li>
  • Compatible with John Deere Combine(s) CTS (s n 500000-536793), CTSII, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Construction & industrial models 770B (s n 500000-570181), 770BH (s n 500000-570181), 772B (s n 500000-570181), 772BH (s n 500000-570181)< li>
  • Compatible with John Deere Engine(s) 6076< li>
  • Replaces John Deere OEM number RE524478, SE500497, RE47396, SE500441< li>
  • Replaces Bosch manufacturer number 0-402-196-702, PES6P-RS2184< li>
  • EDC Governor 7 Pin Connection< li> < UL> (Part No: 200723)
$3025.01
Fuel Injection Pump, Remanufactured, Bosch, 0-402-196-707, RE502697 -
  • For John Deere tractor models 8100 (s n 092770-earlier), 8100T (s n 092770-earlier), 8200T (s n 092770-earlier), 8300T (s n 092770-earlier), 8400T (s n 092770-earlier)< li>
  • Replaces John Deere OEM number RE502697, RE502698, RE62645, SE501246, SE501247, RE67771, SE501249, SE501250< li>
  • Replaces Bosch manufacturer number 0-402-196-707, 0-402-196-709, 0-402-196-715< li> < UL> (Part No: 200760)
$3025.01
Fuel Injection Pump, Remanufactured, Bosch, 9-400-230-044, AR1003569 -
  • For John Deere tractor model 4450< li>
  • Replaces John Deere OEM number AR1003569, RE10076, RE15997, RE23746, RE23753, SE500163, SE500164, RE23926< li>
  • Replaces Bosch manufacturer number 9-400-230-044, 9-40-230-066< li> < UL> (Part No: 200824)
$1850.01
Fuel Injection Pump, Remanufactured, Bosch, 9-400-231-010, AR97433, AR88916, SE500112 -
  • For John Deere tractor model 8440< li>
  • Compatible with John Deere Harvester(s) 5720< li>
  • Replaces John Deere OEM number AR97433, AR88916, SE500112, SE500113, SE500114, AR98258, AR88917, SE500453< li>
  • Replaces Bosch manufacturer number 9-400-231-010, 9-400-231-066< li> < UL> (Part No: 200822)
$2075.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A2522-2, RE31629, RE32096 -
  • For John Deere tractor models 4050 (s n 322686-later), 4250 (s n 322686-later), 4450 (s n 322686-later)< li>
  • Replaces John Deere OEM number RE31629, RE32096< li>
  • Replaces Bosch manufacturer number PES6A2522-2, 9-400-230-118< li> < UL> (Part No: 200747)
$3025.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS2380, AR60369, AR70342, SE500202 -
  • For John Deere tractor model 4430< li>
  • Compatible with John Deere Engine(s) 6404T (s n 445569-earlier)< li>
  • Replaces John Deere OEM number AR60369, AR70342, SE500202, SE500203< li>
  • Replaces Bosch manufacturer number PES6A-RS2380, 0-400-876-186, 0-400-876-187< li> < UL> (Part No: 200739)
$1850.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS2479, 0-400-876-244, AR73517 -
  • For John Deere tractor model 4430 (s n 445570-later)< li>
  • Compatible with John Deere Engine(s) 6404T (s n 445570-later)< li>
  • Replaces John Deere OEM number AR73517< li>
  • Replaces Bosch manufacturer number PES6A-RS2479, 0-400-876-244< li> < UL> (Part No: 200740)
$2475.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS2522, AR88906 -
  • For John Deere tractor model 4440 (s n 068359-later)< li>
  • Compatible with John Deere Engine(s) 6466D (s n 115330-earlier)< li>
  • Replaces John Deere OEM number AR88906, AR70235, AR98272, RE11028, SE500152, SE500153, SE500456< li>
  • Replaces Bosch manufacturer number PES6A-RS2522, PES6A-RND328, 0-400-876-268, 0-400-876-269< li> < UL> (Part No: 200744)
$1850.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS3020, AR61996 -
  • For John Deere tractor models 4630, 7020< li>
  • Replaces John Deere OEM number AR61996< li>
  • Replaces Bosch manufacturer number PES6A-RS3020, 0-401-276-017< li> < UL> (Part No: 200802)
$1650.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS3025, AR73518 -
  • For John Deere tractor model 4630< li>
  • Compatible with John Deere Engine(s) 6404A (Engine s n 445948-later)< li>
  • Replaces John Deere OEM number AR73518, SE500204< li>
  • Replaces Bosch manufacturer number PES6A-RS3025, 0-401-276-037< li> < UL> (Part No: 200803)
$1850.01
Fuel Injection Pump, Remanufactured, Bosch, PES6A-RS3029, AR88911 -
  • For John Deere tractor model 4640< li>
  • Compatible with John Deere Combine(s) 985< li>
  • Replaces John Deere OEM number AR88911, AR105616, AR70236, RE29380, SE500155, SE500156< li>
  • Replaces Bosch manufacturer number PES6A-RS3029, PES6A-3028, 0-401-276-047, 0-401-276-048, 9-400-230-040< li> < UL> (Part No: 200751)
$1850.01
Fuel Injection Pump, Remanufactured, Bosch, PES6P3038-1, RE23748 -
  • For John Deere tractor model 4850< li>
  • Compatible with John Deere Harvester(s) 9950< li>
  • Replaces John Deere OEM number RE23748, RE10077, RE23755, SE500111, SE500168, SE500455, AR100927, RE28359, RE23930< li>
  • Replaces Bosch manufacturer number PES6P3038-1, 0-402-076-764, 9-400-231-084< li> < UL> (Part No: 200831)
$2075.01
Fuel Injection Pump, Remanufactured, Bosch, PES6P-RND250, AR105419 -
  • For John Deere tractor models 5820 (s n 048542-earlier), 8630, 8640< li>
  • Compatible with John Deere Engine(s) 6619A< li>
  • Replaces John Deere OEM number AR105419, AR105418, AR105421, AR87662, AR88925, SE500121, SE500122, SE500123, SE500449, AR88922< li>
  • Replaces Bosch manufacturer number PES6P-RND250, 9-400-231-106, 0-402-076-045, 9-400-231-107< li> < UL> (Part No: 200804)
$2475.01
Fuel Injection Pump, Remanufactured, Bosch, PES6P-RS3144, RE23931, AR99856, RE13055 -
  • For John Deere tractor model 8650< li>
  • Compatible with John Deere Harvester(s) 5830< li>
  • Replaces John Deere OEM number RE23931, AR99856, RE13055, RE19740, RE23756, RE29159, SE500117, RE23749, AR86835, AR99857, AR99858, RE19805, SE500450< li>
  • Replaces Bosch manufacturer number PES6P-RS3144, 9-400-231-106, 9-400-231-204, 0-402-076-752, 9-400-231-098, 9-400-231-174< li> < UL> (Part No: 200829)
$2075.01
Fuel Injection Pump, Remanufactured, Bosch, PES6PRS361, AR105615 -
  • For John Deere tractor model 4840< li>
  • Compatible with John Deere Harvester(s) 9940< li>
  • Replaces John Deere OEM number AR105615, AR105617, AR29154, AR84716, RE11030, RE29155, SE500157, SE500158, SE500159, AR88918< li>
  • Replaces Bosch manufacturer number PES6PRS361, 0-402-076-039, 9-40-231-012, 9-400-231-108< li> < UL> (Part No: 200754)
$2075.01
Fuel Injection Pump, Remanufactured, CAV - Lucas, DPA3349F120X, RE50592 -
  • For John Deere tractor models 6400, 6400L< li>
  • Replaces John Deere OEM number RE50592, SE501560< li>
  • Replaces CAV - Lucas manufacturer number DPA3349F120X, DPA3349F122X< li> < UL> (Part No: 200713)
$1175.01
Fuel Injection Pump, Remanufactured, CAV - Lucas, DPA3462F250, DPAR3462F520, DPA3462F640 -
  • For John Deere tractor models 2840, 2940 (Engine s n 215846-later), 3140 (s n 489178-earlier)< li>
  • Replaces John Deere OEM number AR91775, AR81621, AR91776< li>
  • Replaces CAV - Lucas manufacturer number DPA3462F250, DPAR3462F520, DPA3462F640, DPA3462F650< li> < UL> (Part No: 200799)
$1175.01
Fuel Injection Pump, Remanufactured, CAV - Lucas, DPA3462F690, DPA3462F960, AR103575 -
  • For John Deere tractor models 2950, 3140 (s n 547457-later)< li>
  • Replaces John Deere OEM number AR103575, RE524456, SE501524< li>
  • Replaces CAV - Lucas manufacturer number DPA3462F690, DPA3462F960< li> < UL> (Part No: 200818)
$1175.01
Fuel Injection Pump, Remanufactured, Denso, 190000-0210, AR81817 -
  • For John Deere tractor model 8430< li>
  • Replaces John Deere OEM number AR81817, SE500127, AR76758, SE500452< li>
  • Replaces Denso manufacturer number 190000-0210< li> < UL> (Part No: 209977)
$1575.01
Fuel Injection Pump, Remanufactured, Denso, 190000-2490, AR88917, SE500453 -
  • For John Deere tractor model 8440< li>
  • Compatible with John Deere Harvester(s) 5720< li>
  • Replaces John Deere OEM number AR88917, SE500453, AR88916, AR97433, SE500112, SE500113, SE500114, AR98258< li>
  • Replaces Denso manufacturer number 190000-2490< li> < UL> (Part No: 200832)
$2075.01
Fuel Injection Pump, Remanufactured, Denso, 190000-2500, AR88925 -
  • For John Deere tractor models 5820, 8630, 8640< li>
  • Compatible with John Deere Engine(s) 6619A< li>
  • Replaces John Deere OEM number AR88925, AR105419, AR105418, AR105421, AR87662, SE500121, SE500122, SE500123, SE500449, AR88922< li>
  • Replaces Denso manufacturer number 190000-2500< li> < UL> (Part No: 200828)
$2075.01
Fuel Injection Pump, Remanufactured, Denso, 190000-3280, AR88906 -
  • For John Deere tractor model 4440 (s n 068359-later)< li>
  • Compatible with John Deere Engine(s) 6466D (s n 115330-earlier)< li>
  • Replaces John Deere OEM number AR88906, AR70235, AR98272, RE11028, SE500152, SE500153, SE500456< li>
  • Replaces Denso manufacturer number 190000-3280< li> < UL> (Part No: 200825)
$2250.01
Fuel Injection Pump, Remanufactured, Denso, 190000-5890, AR99857, SE500450 -
  • For John Deere tractor model 8650< li>
  • Compatible with John Deere Harvester(s) 5830< li>
  • Replaces John Deere OEM number AR99857, SE500450, AR86835, AR99856, AR99858, RE13055, RE19740, RE19805, RE23756, RE23931, RE29159, SE500117, RE23749< li>
  • Replaces Denso manufacturer number 190000-5890, 191000-0030< li> < UL> (Part No: 200805)
$3075.01
Fuel Injection Pump, Remanufactured, Denso, 190000-6980, RE10076 -
  • For John Deere tractor model 4450< li>
  • Compatible with John Deere Engine(s) 6466D (s n 067685-later)< li>
  • Replaces John Deere OEM number RE10076, RE15997, RE23753, SE500458, RE23926, AR100356< li>
  • Replaces Denso manufacturer number 190000-6980< li> < UL> (Part No: 200742)
$1900.01
Fuel Injection Pump, Remanufactured, Denso, 191000-9310, RE47041 -
  • For John Deere tractor models 4955 (Engine s n 165526-later), 4960< li>
  • Compatible with John Deere Engine(s) 6076 (s n 499999-earlier)< li>
  • Replaces John Deere OEM number RE47041, SE500467< li>
  • Replaces Denso manufacturer number 191000-9310, 191000-9311, 1910009312< li> < UL> (Part No: 200763)
$4150.01
Fuel Injection Pump, Remanufactured, RE10313, AR74343, SE500626, Roosa Master, DM4-3147 -
  • For John Deere tractor model 4240< li>
  • Replaces John Deere OEM number RE10313, AR74343, SE500626< li>
  • Replaces Roosa Master manufacturer number DM4-3147, DM4-4041, DM4-4084< li> < UL> (Part No: 200684)
$1325.01
Fuel Injection Pump, Remanufactured, RE22724, Roosa Master, DM4-4543 -
  • For John Deere tractor model 4050 (359TR engine)< li>
  • Replaces John Deere OEM number RE22724< li>
  • Replaces Roosa Master manufacturer number DM4-4543< li> < UL> (Part No: 200698)
$1200.01
Fuel Injection Pump, Remanufactured, RE36654, SE500463 -
  • For John Deere tractor model 4555< li>
  • Replaces John Deere OEM number RE36654, SE500463< li>
  • Nippendenso< li>
  • Marked : PES6A100 1410 RN0699 19100-690< li> < UL> (Part No: 210551)
$2625.01
Fuel Injection Pump, Remanufactured, RE43020, Roosa Master, DB4-4993 -
  • For John Deere tractor model 7600< li>
  • Replaces John Deere OEM number RE43020, SE500583< li>
  • Replaces Roosa Master manufacturer number DB4-4993< li>
  • For a New version of this sku use Item #: 162281< li> < UL> (Part No: 200778)
$1475.01
Fuel Injection Pump, Remanufactured, SE500875 -
  • For John Deere tractor models 250, 5303, 5310, 5320< li>
  • Replaces John Deere OEM number SE500875, RE500442< li>
  • Replaces manufacturer number DB4-5366, DB4-5562< li> < UL> (Part No: 209997)
$1625.01
Fuel Injector - For tractor models JD 3010, 3020, 4010, 4020 model tractors. Verify stamped number before ordering: Stamped number - Roosa Master: 17705, 18270, 18646, 18767, 20364, 20494. Replaces AR39811, AR46846, AR50781, SE501163. (Part No: 109653)		$31.60
Fuel Injector - This injector is used on JOHN DEERE 5055E, 5065E, 5075E, 5610, 5303 serial number 103383->, 5403, 5503. Replaces RE515684, RE509896. (Part No: 180172)		$44.70
Fuel Injector - Nozzle, Injector. Pencil-type injector For tractor models 840, 940, 1020, 1030, 1040, 1129, 1139, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2840, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3350, 3640, 4020. Replaces: AT25502, AT30299, AR49877, AR56290, AR73673, AR88239, AT18064, SE500822, SE500823, ROOSA # 22202. (Part No: 113965)		$31.26
Fuel Injector -
  • For John Deere tractor models 4700, 5410, 5415, 5420N, 5425N, 5510, 5510N, 5520N, 5525N, 5615, 5625, 5715, 5725, 6010, 6110, 6110L, 6120, 6120L, 6205, 6210L, 6215, 6220, 6220L, 6310L, 6320, 6320L, 6405, 6410L, 6415, 6420, 6420L, 6505, 6510, 6515, 6520, 6520L, 6603, 6605, 6610, 6615, 6715, 7210, 7220, 7320, 7405, 7410, 7420, 7510, 7520, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 120C, 160C LC, 200CLC, 200LC, 210LE, 230LCR, 270LC, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 344H, 360D (s n 604613-earlier), 360DC (s n 604614-630435), 360DG (s n 604614-630435), 410E, 410G, 410J, 444H, 444HLL, 444J (s n 611274-earlier), 444JR, 450G, 450H, 450J (s n 159986-earlier), 455G, 460D (s n 604613-earlier), 485E, 486E, 488E, 540G, 544H, 544HLL, 548G, 550G, 550H, 550J (s n 159986-earlier), 555G, 624H, 624HLL, 640G, 648G, 650C, 650G, 650H, 650J (s n 159986-earlier), 670C, 670CH, 672CH, 700H, 700J, 700J (s n 139435-earlier), 710D, 710J, 750J (s n 141343-earlier), 810D (s n 1401-2002), 850J (s n 130885-earlier), 1010D (s n 3501-4000), 1110D (s n 1121-later), 1410D (s n 0472-1200), 2054, 3215 (s n 206800-earlier), 3220, 3415 (s n 206800-earlier), 3420, 3800< li>
  • Replaces John Deere OEM number RE531436, RE507766, SE501103< li>
  • Replaces manufacturer number 38416< li>
  • Use With Stanadyne DE10 Injection Pump< li>
  • For a Remanufactured version of this sku use Item #: 210599< li> < UL> (Part No: 123963)
$67.90
Fuel Injector -
  • For John Deere tractor models 4050, 4250, 4450, 4630 (s n 445948-later), 4640, 4650, 4840, 4850< li>
  • Compatible with John Deere Combine(s) 985, 1188, 1188H4, 6620, 7720, 8820 (s n 227599-earlier)< li>
  • Compatible with John Deere Harvester(s) 5200 (s n 445948-later), 5400 (s n 445948-later), 5440, 5460< li>
  • Compatible with John Deere Construction & industrial models 80, 644D (s n 302868-later), 790, 790D, 792, 793 (D), 850B (s n 302868-later), 892DLC (s n 302868-later), 892DLC< li>
  • Compatible with John Deere Engine(s) 6076 (s n 499999-earlier), 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number AR74664, SE500102, R85335, RE25185< li>
  • Bosch Style < li>
  • For a Remanufactured version of this sku use Item #: 210607< li> < UL> (Part No: 156273)
$87.00
Fuel Injector -
  • For John Deere tractor models 4560 (TRW09), 4755, 4760 (s n 184462earlier, TRW11), 4955, 4960, 7700 (With 6076 s n 517600-earlier), 7800 (With 6076 s n 517600-earlier), 8100 (With 6076 s n 009999-earlier), 8200 (With 6076 s n 009999-earlier)< li>
  • Compatible with John Deere Combine(s) 9500 (s n -142255-earlier), 9500 SH (s n -142255-earlier), 9600 (s n 165438-earlier)< li>
  • Compatible with John Deere Harvester(s) 9960 (s n 129467-earlier), 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 540E (s n 101234-later), 548E (s n 101234-later), 640E (s n 101234-later), 644ER, 644G, 648E (s n 101234-later), 740E (s n 101234-later), 740G, 748E (s n 101234-later), 770B (s n 500000-later), 770BH (s n 500000-later), 772B (s n 500000-later), 772BH (s n 500000-later), 850C, 892ELC< li>
  • Replaces John Deere OEM number RE52109, SE500354< li>
  • For a Remanufactured version of this sku use Item #: 210625< li> < UL> (Part No: 164170)
$88.00
Fuel Injector -
  • For John Deere tractor models 790, 4200< li>
  • Compatible with John Deere Lawn & Garden(s) F1145< li>
  • Replaces John Deere OEM number AM878593< li>
  • For a Remanufactured version of this sku use Item #: 210627< li> < UL> (Part No: 165341)
$78.00
Fuel Injector -
  • For John Deere tractor models 8440, 8630, 8640< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5820< li>
  • Replaces John Deere OEM number AR73100< li>
  • For a Remanufactured version of this sku use Item #: 210628< li> < UL> (Part No: 165614)
$51.00
Fuel Injector -
  • For John Deere tractor models 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 7700< li>
  • Replaces John Deere OEM number AR85541, SE500106< li>
  • For a Remanufactured version of this sku use Item #: 210629< li> < UL> (Part No: 165615)
$58.00
Fuel Injector -
  • For John Deere tractor models 4040, 4230, 4230 (With Engine s n 50000-later and Pump #AR73525)< li>
  • Compatible with John Deere Combine(s) 6600 (Sidehill with Engine s n 50000-later and Pump #AR73525), 7700< li>
  • Replaces John Deere OEM number AR79686< li>
  • For a Remanufactured version of this sku use Item #: 210630< li> < UL> (Part No: 165625)
$67.00
Fuel Injector -
  • For John Deere tractor models 4640, 4840, 8430, 8440, 8450, 8640, 8650< li>
  • Compatible with John Deere Combine(s) 8820< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9940< li>
  • Compatible with John Deere Engine(s) 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later), 6619AF, 6619TF-01< li>
  • Replaces John Deere OEM number AR73847< li>
  • For a Remanufactured version of this sku use Item #: 210210< li> < UL> (Part No: 165626)
$71.00
Fuel Injector -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720< li>
  • Compatible with John Deere Engine(s) 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number AR74665< li>
  • For a Remanufactured version of this sku use Item #: 210631< li> < UL> (Part No: 165630)
$61.00
Fuel Injector -
  • For John Deere tractor models 4555, 4560, 4755, 4760 (s n 184463-later), 4955, 4960, 7800 (s n 517601-later), 8560 (s n 142256-165333)< li>
  • Compatible with John Deere Combine(s) CTS, 9500 (s n 142256-538145), 9600 (s n 142238-laterm 6076 Engine)< li>
  • Compatible with John Deere Construction & industrial models 644E, 644ER, 644G, 740E (s n 101234-165526), 740G, 748E (s n 101234-165526), 748G, 770B (s n 500000-later), 772B (s n 500000-later), 772BH, 892ELC< li>
  • Replaces John Deere OEM number RE55971, RE46364< li>
  • Bosch Replacement< li> < UL> (Part No: 168035)
$94.00
Fuel Injector -
  • For John Deere tractor models 8110, 8110T, 8200 (s n 010000-Later), 8200T (With 6081), 8210, 8210T, 8400, 8400T, 8410, 8410T, 9100< li>
  • Replaces John Deere OEM number RE61593, SE500183, SE501124< li> < UL> (Part No: 174092)
$87.00
Fuel Injector -
  • For John Deere tractor models 4850, 8450, 8650< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 9950< li>
  • Compatible with John Deere Construction & industrial models 890A, 992D LC< li>
  • Replaces John Deere OEM number AR103189, RE20870< li>
  • KDEL, tip DLLA155S895, 6 x 0.285< li> < UL> (Part No: 186332)
$30.00
Fuel Injector - 12.5L, Remanufactured, SE501954, RG30742 -
  • For John Deere tractor models 9300, 9300T, 9320, 9320T< li>
  • Compatible with John Deere Combine(s) 9860 STS< li>
  • Compatible with John Deere Engine(s) 6125< li>
  • Replaces John Deere OEM number SE501954, RG30742, RE517660, RE517661, RE506967, RG33959, RG33966, RG517661< li>
  • For a New version of this sku use Item #: 158491< li> < UL> (Part No: 210612)
$510.01
Fuel Injector Boot, Pack of 12 - This is a fuel injector leak off boot. It is used on multiple John Deere diesel models. 1 used per injector. Price is for 12 boots. Replaces R34765 (Part No: 114213)		$19.19
Fuel Injector Fitting -
  • For John Deere tractor models 7710, 7720, 7810, 7820, 7920, 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8520, 8520T, 9120, 9220, 9320, 9420, 9520, 9620< li>
  • Compatible with John Deere Combine(s) 9540 WTS, 9560 STS, 9560 WTS, 9580 WTS, 9640 WTS, 9660, 9660 CTS, 9660 STS, 9660 WTS, 9680 WTS, 9760 STS, 9780 CTS< li>
  • Replaces John Deere OEM number RE509416< li> < UL> (Part No: 185453)
$23.00
Fuel Injector, Remanufactured, AR39997, HB100 -
  • For John Deere tractor models 3010, 3020 (s n 122998-earlier & Engine s n 50000-67999), 4010, 4020 (s n 200999-earlier & Engine s n 65000-90999)< li>
  • Replaces John Deere OEM number AR39997, AR28619, AR34029< li>
  • Replaces manufacturer number HB100< li> < UL> (Part No: 207292)
$98.01
Fuel Injector, Remanufactured, AR49877, AR73673, AR88236, AR88239, AR89563, AR89564 -
  • For John Deere tractor models 820, 830, 940, 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2150, 2155, 2255, 2320, 2350, 2355, 2355N, 2440, 2520, 2530, 2535, 2550, 2555, 2730, 2735, 2840, 2940, 2950, 2955, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3330, 3350, 3530, 4020, 4030, 4530, 5300< li>
  • Compatible with John Deere Combine(s) 1075, 2240, 3300, 4400, 4420, 4435, 6600< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 7440, 9900, 9910, 9920< li>
  • Compatible with John Deere Construction & industrial models 210, 210C, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 350, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 440, 440A, 440B, 444, 444C, 444CH, 444D, 444E, 444H, 450, 450B, 450C, 450D, 450G, 455D, 455G, 480, 480A, 480B, 480C, 482C, 540, 540A, 544, 544A, 550G, 555G, 570, 570A, 610, 610B, 650G, 710, 710B, 710C< li>
  • Compatible with John Deere Hay Cutting(s) 2270, 2280, 2420, 3430< li>
  • Replaces John Deere OEM number AR49877, AR73673, AR88236, AR88239, AR89563, AR89564, SE500822, SE501099, 22202, 27333< li>
  • For a New version of this sku use Item #: 113965< li> < UL> (Part No: 210575)
$38.01
Fuel Injector, Remanufactured, AR74664 -
  • For John Deere tractor models 4050, 4250, 4450, 4630, 4640, 4650, 4840, 4850< li>
  • Compatible with John Deere Combine(s) 6620, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460< li>
  • Compatible with John Deere Engine(s) 6076 (s n 499999-earlier), 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number AR74664, SE500102< li>
  • For a New version of this sku use Item #: 156273< li> < UL> (Part No: 210607)
$44.01
Fuel Injector, Remanufactured, AR74665 -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 4450< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720< li>
  • Compatible with John Deere Engine(s) 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number AR74665< li>
  • For a New version of this sku use Item #: 165630< li> < UL> (Part No: 210631)
$100.01
Fuel Injector, Remanufactured, AR79686 -
  • For John Deere tractor models 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Combine(s) 6600, 7700< li>
  • Replaces John Deere OEM number AR79686< li>
  • For a New version of this sku use Item #: 165625< li> < UL> (Part No: 210630)
$85.01
Fuel Injector, Remanufactured, AR85541 -
  • For John Deere tractor models 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 7700< li>
  • Replaces John Deere OEM number AR85541, SE500106< li>
  • For a New version of this sku use Item #: 165615< li> < UL> (Part No: 210629)
$98.01
Fuel Injector, Remanufactured, R50781 -
  • For John Deere tractor models 3020, 4000, 4020, 4025, 4230, 4520< li>
  • Replaces John Deere OEM number R50781< li>
  • pencil # 17705< li>
  • AR50781< li>
  • This is a remanufactured injector< li>
  • For a New version of this sku use Item #: 109653< li> < UL> (Part No: 204239)
$59.01
Fuel Injector, Remanufactured, RE52109 -
  • For John Deere tractor models 4560 (TRW09), 4755, 4760 (s n 184462earlier, TRW11), 4955, 4960, 7700 (With 6076 s n 517600-earlier), 7800 (With 6076 s n 517600-earlier), 8100 (With 6076 s n 009999-earlier), 8200 (With 6076 s n 009999-earlier)< li>
  • Compatible with John Deere Combine(s) 9500 (s n -142255-earlier), 9500 SH (s n -142255-earlier), 9600 (s n 165438-earlier)< li>
  • Compatible with John Deere Harvester(s) 9960 (s n 129467-earlier), 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 540E (s n 101234-later), 548E (s n 101234-later), 640E (s n 101234-later), 644ER, 644G, 648E (s n 101234-later), 740E (s n 101234-later), 740G, 748E (s n 101234-later), 770B (s n 500000-later), 770BH (s n 500000-later), 772B (s n 500000-later), 772BH (s n 500000-later), 850C, 892ELC< li>
  • Replaces John Deere OEM number RE52109, SE500354< li>
  • For a New version of this sku use Item #: 164170< li> < UL> (Part No: 210625)
$65.01
Fuel Injector, Remanufactured, RE531436, RE507766 -
  • For John Deere tractor models 4700, 5410, 5415, 5420N, 5425N, 5510, 5510N, 5520N, 5525N, 5615, 5625, 5715, 5725, 6010, 6110, 6110L, 6120, 6120L, 6205, 6210L, 6215, 6220, 6220L, 6310L, 6320, 6320L, 6405, 6410L, 6415, 6420, 6420L, 6505, 6510, 6515, 6520, 6520L, 6603, 6605, 6610, 6615, 6715, 7210, 7220, 7320, 7405, 7410, 7420, 7510, 7520, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 120C, 160C LC, 200CLC, 200LC, 210LE, 230LCR, 270LC, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 344H, 360D (s n 604613-earlier), 360DC (s n 604614-630435), 360DG (s n 604614-630435), 410E, 410G, 410J, 444H, 444HLL, 444J (s n 611274-earlier), 444JR, 450G, 450H, 450J (s n 159986-earlier), 455G, 460D (s n 604613-earlier), 485E, 486E, 488E, 540G, 544H, 544HLL, 548G, 550G, 550H, 550J (s n 159986-earlier), 555G, 624H, 624HLL, 640G, 648G, 650C, 650G, 650H, 650J (s n 159986-earlier), 670C, 670CH, 672CH, 700H, 700J, 700J (s n 139435-earlier), 710D, 710J, 750J (s n 141343-earlier), 810D (s n 1401-2002), 850J (s n 130885-earlier), 1010D (s n 3501-4000), 1110D (s n 1121-later), 1410D (s n 0472-1200), 2054, 3215 (s n 206800-earlier), 3220, 3415 (s n 206800-earlier), 3420, 3800< li>
  • Replaces John Deere OEM number RE531436, RE507766, SE501103< li>
  • Replaces manufacturer number 38416< li>
  • For a New version of this sku use Item #: 123963< li> < UL> (Part No: 210599)
$44.01
Fuel Injector Seal -
  • For John Deere tractor models 3410, 4700, 5410, 5415, 5420, 5420N, 5425, 5425N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5615, 5625, 5715, 5725, 6010, 6110, 6110L, 6205, 6210, 6210L, 6310, 6310L, 6310S, 6405, 6410, 6410L, 6410S, 6505, 6510, 6510L, 6515, 6520, 6603, 6605, 6610, 6615, 6715, 7210, 7405, 7410, 7510, 7610, 9410< li>
  • Compatible with John Deere Construction & industrial models 120, 200, 200LC, 210, 210LE, 230, 230LC, 230LCR, 270, 270LC, 310, 310E, 310G, 310SE, 310SG, 315, 315SE, 315SG, 344, 410, 410E, 410G, 410J, 444, 444H, 450, 450G, 450H, 455, 455G, 485, 485E, 486, 486E, 488, 540, 540G, 540GII, 544, 544H, 544HLL, 548, 548G, 548GII, 548GIII, 550, 550G, 550H, 555, 555G, 624, 624H, 624HLL, 640, 640G, 640GII, 643, 648, 648G, 648GII, 650, 650G, 650H, 670, 670C, 670CH, 672, 672CH, 700, 700H, 700J, 710D, 843, 850< li>
  • Replaces John Deere OEM number R48000< li>
  • ID: .324"< li>
  • OD: .399"< li>
  • Thickness: .114"< li> < UL> (Part No: 123967)
$0.60
Fuel Injector Tee -
  • For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2640, 2840, 2940, 4030< li>
  • Compatible with John Deere Combine(s) 925, 935, 945, 965, 965 (H), 968 (H), 975, 975 (HY4), 1032, 1042, 1052, 1055, 1065, 1068 (H), 1072, 1075, 1075 (H4), 4400, 4420< li>
  • Compatible with John Deere Construction & industrial models 300B, 301A, 302, 401B, 401C, 401D, 544B, 570, 570A< li>
  • Replaces John Deere OEM number AR85618< li> < UL> (Part No: 168653)
$13.26
Fuel Lever Sensor -
  • For John Deere tractor models 3033R, 3038R, 3039R, 3045R, 3046R, 3320, 3520, 3720, 4044R, 4049R, 4052R, 4066R, 4320, 4520, 4720< li>
  • Compatible with John Deere Harvester(s) CH330, CH530, 3520< li>
  • Replaces John Deere OEM number LVA17746, LVA19140< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164045)
$172.00
Fuel Lift Pump - This Fuel Lift Transfer Pump is Tank Mounted. Used on 5215, 5215F, 5215V, 5315, 5315F, 5315V, 5415, 5515, 5515F, 5515V, 5603, 5615, 5615F, 5615V, 5620, 5625, 5720, 5725, 5820, 6020, 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420, 6420L, 6420S, 6515, 6520, 6520L, 6615, 6620, 6715, 6820, 6920, 6920S, 7220, 7320, 7420, 7520, SE6020, SE6120, SE6220, SE6320, SE6420, SE6520, SE6620. Replaces AL168483 (Part No: 114880)		$77.00
Fuel Lift Pump -
  • For John Deere tractor models 655, 755, 756, 790, 855, 856, 955, 2025R, 2305, 2320, 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710< li>
  • Compatible with John Deere Construction & industrial models 110< li>
  • Compatible with John Deere Lawn & Garden(s) 1445, 1545, 1565, 1600, 1620< li>
  • Replaces John Deere OEM number AM882588< li> < UL> (Part No: 169741)
$21.76
Fuel Lift Transfer Pump - Also replaces AR52159, RE42211. For tractor models 290D, 300, 300A, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 34, 3420, 344E, 344G, 350, 2155, RE27667 (Part No: 112524)		$25.26
Fuel Lift Transfer Pump -
  • For John Deere tractor models 5085M, 5095M, 5095MH, 5105M, 5105ML, 6400SP, 6403, 6603, 7210, 7405, 7410, 7500, 7510, 7610, 7610 (s n 089999-earlier), 7710, 7810< li>
  • Compatible with John Deere Construction & industrial models L512, L514, L524, L534, 324H, 344H, 670C (s n 589370-later), 670CH (s n 589370-later), 672CH (s n 589370-later), 3200, 3400, 3800< li>
  • Compatible with John Deere Engine(s) 3029, 4039, 4045 (DF270 & TF270), 6068 (HF275 & TF275), 6068D, 6068H< li>
  • Replaces John Deere OEM number RE68345< li>
  • Mounting holes: 2< li>
  • Inlet Position: 12 o'clock (with cam lever pointing at you)< li>
  • Outlet Position: 9 o'clock (with cam lever pointing at you)< li>
  • Includes O-Ring Seal< li> < UL> (Part No: 123968)
$39.00
Fuel Lift Transfer Pump -
  • For John Deere tractor models 5215 (s n 205094-earlier), 5215F, 5215V, 5315 (s n 205094-earlier), 5315F, 5315V, 5620 (s n 443511-earlier), 5720 (s n 443511-earlier), 5820 (s n 443511-earlier), 6020 (s n 443675-earlier), 6120 (s n 443675-earlier), 6120L (s n 443675-earlier), 6215 (s n 443675-earlier), 6220 (s n 443675-earlier), 6220L (s n 443675-earlier), 6320 (s n 443675-earlier), 6320L (s n 443675-earlier), 6415 (s n 443675-earlier), 6420 (s n 443675-earlier), 6420L (s n 443675-earlier), 6420S (s n 443675-earlier), 6515 (s n 443618-ealier), 6520 (s n 443618-ealier), 6520L (s n 443675-earlier), 6615 (s n 443618-ealier), 6620 (s n 443618-ealier), 6920 (s n 443618-ealier), 6920S (s n 443618-ealier), 7220 (s n 004517-034662), 7320 (s n 004517-034662), 7420, 7520 (2003-2007)< li>
  • Replaces John Deere OEM number AL155607< li> < UL> (Part No: 127327)
$76.30
Fuel Lift Transfer Pump -
  • For John Deere tractor models 6310, 6320, 6320L, 6410, 6420, 6420L, 6420S, 6510, 6520L, 6610, 6620, 6810, 6820, 6910, 6910S, 6920, 6920S, 7220, 7320, 7420, 7520< li>
  • Compatible with John Deere Construction & industrial models 3800< li>
  • Replaces John Deere OEM number RE509530, RE505825< li> < UL> (Part No: 127329)
$94.00
Fuel Lift Transfer Pump -
  • For John Deere tractor models 5075M, 5080GF, 5080GV, 5085E, 5085M, 5090G, 5090GF, 5090GH, 5090GV, 5100E, 5100GF, 5100GV, 5100M, 5115M, 6105D, 6105E, 6115D, 6120E, 6130D, 6135E, 6140D< li>
  • Compatible with John Deere Harvester(s) 7460< li>
  • Compatible with John Deere Construction & industrial models L514 (Engine CD4045HF288), L524 (Engine CD4045HF286), L528 (Engine CD4045HF286), LR612 (Engines CD4045TF227 CD4045HF289), LR614 (Engines CD4045TF227 CD4045HF289), 120D, 130G, 160DLC, 160GLC, 180GLC, 200DLC, 210G, 210GLC, 240DLC, 250GLC (Engines 6068HT082 and 6068HT062), 270DLC, 290GLC (Engines 6068HT082 and 6068HT062), 335 (D), 344 (J and K), 437 (D), 444J (a n 611275-later), 444K (with 4045HDW54 engine), 450J (s n 159987-later with 4045HT059 and 4045HT074 engine), 524K, 540H, 544J (D, s n 611800-later), 544K (with 4045HDW54 engine), 548H, 550J (Tier 3, s n 159987-later), 605 (C), 624J, 624K (with 6068HDW79 or 6068HDW83 engine), 640 (GIII), 640H, 643 (J and K), 644J (s n 611232-later), 644K, 648 (GIII), 648H, 648HTJ (s n 630436-later), 650J (Tier 3, s n 159987-later), 670C (s n 582130-later), 670CH (s n 582130-later), 670D, 670G (with 6090HDW01 or 6068HDW75 engines), 670GP (with 6090HDW01 or 6068HDW75 engines), 672CH (s n 582130-later), 672D, 672G (with 6090HDW01 or 6068HDW75 engines), 672GP (with 6090HDW01 or 6068HDW75 engines), 700J (Tier 3, s n 139436), 750J (s n 141344), 755D, 810D (s n 2003-later), 810E (s n WJ0810E002501-later), 843 (J and K), 970D (s n 1301-later), 1010D (s n 4001-later), 1010E (s n WJ1010E005003-later), 1070D (s n 1301-later), 1070E (s n WJ1070E0011801-later), 1110D (s n 2301-later), 1110E (s n WJ1110E003203-later), 1170E (s n WJ1170E001701-later), 1210E (s n WJ1210E00102-later), 1410D (s n 1201-later), 1490D, 1510E (s n WJ1510E001504-later), 2154 (D), 2454 (D, s n 611800-later), 2954 (D, s n 611800-later)< li>
  • Compatible with John Deere Engine(s) 6068H< li>
  • Compatible with John Deere Hay Cutting(s) A400, D450 (with 6068HE051 engine), R450< li>
  • Replaces John Deere OEM number RE517230< li> < UL> (Part No: 159045)
$53.60
Fuel Lift Transfer Pump -
  • For John Deere tractor models 5083E, 5083EN, 5093E, 5093EN, 5101E, 5101EN< li>
  • Replaces John Deere OEM number RE507581< li> < UL> (Part No: 161803)
$36.50
Fuel Line - This is the fuel line to Carburetor used on John Deere A from Serial number 622821 to 655571. Replaces original part number AA4299R. (Part No: 182897)		$48.00
Fuel Line - This is the fuel line to the Carburetor used on John Deere B after Serial Number 238796. It replaces AB3888R, AB3888 (Part No: 184505)		$44.20
Fuel Line -
  • For John Deere tractor models A (sn"477000 - 622820), AO (sn:272000-later (Styled), AR (sn:272000-later (Styled)< li>
  • Replaces John Deere OEM number AA5067, AA2349R< li>
  • Must use with a three way valve< li> < UL> (Part No: 109865)
$41.99
Fuel LIne - This Fuel Line is for John Deere 50 to serial number5016132 with manual shut-off. This will not fit later 50 tractors with an automatic sediment bowls. (Part No: AB4640R)$43.65
Fuel Line - Filter to Injection Pump -
  • For John Deere tractor models 4000, 4020< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later), 644A (engine s n 280000-earlier)< li>
  • Replaces John Deere OEM number AR31553< li>
  • Fuel Filter To Injection Pump< li>
  • Tubing and fittings< li> < UL> (Part No: 162786)
$31.00
Fuel Line - Return -
  • For John Deere tractor models 4000 (Engine s n 280001 - later), 4020 (Engine s n 091000 - later), 4520 (Engine s n 245535 - 303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (Engine s n 091000 - 214999)< li>
  • Replaces John Deere OEM number AR34807< li> < UL> (Part No: 158220)
$36.00
Fuel Plunger Injection Pump -
  • For John Deere tractor models R, 70 (s n 7017500 - later), 80, 820, 830 (s n 8203099 - earlier), 840 (s n 8400000 - later)< li>
  • Replaces John Deere OEM number AF3614, AF3614R, AR832, AR832R< li>
  • Size 10mm Bosch< li>
  • " Sold in sets of two "< li> < UL> (Part No: 129363)
$430.00
Fuel Plunger Injection Pump -
  • For John Deere tractor models 80, 720, 730 (s n 7200000 - later), 820, 830 (s n 8203100 - later)< li>
  • Replaces John Deere OEM number AF3614, AF3614R< li>
  • Size 13mm Bosch< li>
  • " Sold in sets of two "< li> < UL> (Part No: 129365)
$325.00
Fuel Pressure Sensor -
  • For John Deere tractor models 7185J, 7205J, 7225J, 8130, 8225R, 8230, 8230T, 8245R, 8270R, 8295R, 8320R, 8320RT, 8330, 8330T, 8345R, 8345RT, 8430T, 8530, 9230< li>
  • Compatible with John Deere Combine(s) S550, S560, S650, S660, S670, S670HM, S760, S770, T550, T560, T660, T670, W540, W550, W650, W660, 9560 STS, 9570 STS, 9640 WTS, 9660 STS, 9660 WTS, 9670 STS, 9770 STS, 9780 CTS< li>
  • Compatible with John Deere Harvester(s) CH330, CH530, CH570, 3520, 7180, 7250, 7660, 8100, 8200, 9970< li>
  • Compatible with John Deere Construction & industrial models 120D, 130G, 160DLC, 160GLC, 180GLC, 200DLC, 210G, 210GLC, 250D, 250GLC, 270DLC, 290GLC, 300D, 310E, 350DLC, 350GLC, 380GLC, 524KII, 540H, 544KII, 548H, 620G, 620GP, 622G, 622GP, 624J, 624K, 624KII, 624KR, 640GII, 640H, 640L, 644J, 644K, 648GII, 648H, 648HTJ, 648L, 670G, 670GP, 672G, 672GP, 703JH, 724K, 744K, 744KII, 748H, 748HTJ, 748L, 755D, 764, 770G, 770GP, 772G, 772GP, 803M, 810D, 810E, 844KII, 848H, 848HTJ, 848L, 850J, 853M, 870G, 870GP, 872G, 872GP, 903K, 903KH, 903M, 909K, 909KH, 909M, 948L, 953K, 953M, 959K, 959M, 1010D, 1010E, 1070E, 1110D, 1110E, 1170E, 1210E, 1270D, 1270E, 1270G, 1410D, 1470D, 1470E, 1470G, 1490D, 1510E, 1910E< li>
  • Replaces John Deere OEM number RE522794< li> < UL> (Part No: 164656)
$40.00
Fuel Pressure Sensor -
  • For John Deere tractor models 5075M, 6105R, 6110E, 6110R, 6120R, 6125E, 6125R, 6130R, 6145R, 6150M, 6155R, 6155RH, 6170M, 6170R, 6175R, 6190R, 6195R, 6210R, 6215R, 6250R, 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8110, 8110T, 8210, 8210T, 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8320R, 8335R, 8345R, 8360R, 8370R, 9100, 9200, 9230, 9300, 9330, 9360R, 9370R, 9400, 9410R, 9420R, 9430, 9430T, 9460R, 9460RT, 9470R, 9510R, 9510RT, 9520R, 9520RT, 9530, 9530T, 9560R, 9560RT, 9570R, 9570RT, 9620R, 9630, 9630T< li>
  • Compatible with John Deere Combine(s) S550, S660, S670, S670HM, S680, S680HM, S690, S690HM, S760, S770, S780, S790, 9560 STS (Self-Propelled), 9570 STS (Self-Propelled), 9660 STS (Self-Propelled), 9760 STS (Self-Propelled), 9770 STS (Self-Propelled), 9780 CTS (Self-Propelled), 9860 STS (Self-Propelled), 9870 STS (Self-Propelled)< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7380, 7400, 7450, 7480, 7500, 7550, 7580, 7700, 7750, 7780, 7800, 8300, 8400, 8500, 8600< li>
  • Replaces John Deere OEM number RE154966< li>
  • Fuel Pressure Sensor< li> < UL> (Part No: 167330)
$39.50
Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: 140647)		$33.76
Fuel Pump - This fuel pump is for diesel tractors: 830, 930, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159, DD14195, RE37482, AR102678, DD13483, RE37482, AR52729. Ports are 3 8 - 20 thread. The inlet is at 1 o'clock and outlet at 7 o'clock with the cam lever pointing toward you. The inlet and outlet can be "clocked" to a different position. Some applications may need different fittings, but thise are not supplied by Yesterday's Tractor. (Part No: 112524)		$25.26
Fuel Pump - Fuel transfer pump, for diesel engines in tractors: 4320, 4520, 4620, 4720, 7020 all to engine serial number 335845. Forage harvesters: 5200, 5400 with 6404 engines to serial number 335845. Replaces AR49771, RE36903. For 4320, 4620, 5200, 5400, 7020 (Part No: 107014)		$56.00
Fuel Pump - Fuel transfer pump, for gas or diesel engines. Tractors: 3010, 4010. Replaces AR26672, AR26675, AR40508, AR40509, AR53567, RE36904. (Part No: 119782)		$27.88
Fuel Pump - For tractor models 6200, 6300, 6400, 6200L, 6300L, 6400L, 6500L, 7500, 6405, 6605, 6110, 6210, 6310, 6410, 6110L, 6210L, 6310L, 6410L, 6510L, 6310S, 6410S, 6510S, 6215, 6415, 6715, (6120, 6220, 6320, 6420, 6120L, 6220L, 6320L, 6420L, 6520L except tier II engine), 7220. Replaces AL113125, AL78405, AL81173 (Part No: 119801)		$57.00
Fuel Pump - For tractor models with engine SN# 742760 & up: 6100D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603, 7210, 7410, 7505, 7510, 7630, 7720, 7730, 7820, 7830, 7920, 7930. Replaces RE66153, DZ110617 (Part No: 123969)		$45.00
Fuel Pump - For 1550, 1750, 1850, 1950, 2155, 2250, 2355N, 2450, 2555, 2650, 2755, 2850, 2855, 2950, 3050, 3055, 3155, 3255, 3350, 3650. S58852 (Part No: 119800)		$40.26
Fuel Pump -
  • For John Deere Construction & industrial models 110, 120, 160LC, 210LE, 230LCR, 230LCRD, 310E, 310G, 310J, 310SE, 310SG, 315SE< li>
  • Replaces John Deere OEM number RE66153< li> < UL> (Part No: 169759)
$27.00
Fuel Pump, Mechanical -
  • For John Deere tractor models 7610, 7710, 7810, 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310RT, 8400, 8400T, 8410, 8410T, 8560, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Combine(s) 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9650 CTS< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950< li>
  • Compatible with John Deere Construction & industrial models 330LC, 330LCR, 370, 644G, 644H, 750C, 750CII, 850C, 850CII< li>
  • Replaces John Deere OEM number RE46252< li>
  • With Primer Handle< li> < UL> (Part No: 183470)
$139.00
Fuel Pump with Sending Unit Assembly -
  • For John Deere tractor models 3200 (with 4.5T PowerTech), 3400 (with 4.5T PowerTech), 6010 (with 4.5T PowerTech), 6020 (with 4.5T PowerTech), 6100 (with 4045D Engine), 6110 (with 4.5T PowerTech), 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6420, 6500, 6510, 6520, 6600, 6605, 6610, 6620, 6800, 6810, 6900, 6910, 7220< li>
  • Replaces John Deere OEM number AL113125, AL78259, AL81173< li>
  • Assembly includes Fuel Pump and Sending Unit< li> < UL> (Part No: 161766)
$147.00
Fuel Return Tee - This Tee sits on top of the injector and connects to the diesel return line. (Part No: 176360)		$7.09
Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Part No: 113631)		$1.90
Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number L886T. Gasket may be cork or rubber, depending on availability. (Part No: 105383)		$2.10
Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models: L, LA, M, MC, MT, 320, 330, 40, 420, 430, 1010. Replaces M3340T . (Part No: 105382)		$2.99
Fuel Sending Unit - For tractor models (2440, 2640 SN# 341000 and up). (Part No: 119716)$44.90
Fuel Sending Unit - For model 1010 gas or diesel. 0 to 30 ohms, 6.75 inch overall length, 2 inch bolt circle. (Part No: 119720)		$56.30
Fuel Sending Unit - Fuel Sending Unit. 30 ohms reads full. For tractor models 1020, 1520, 1530, 2020, 2030, (2440, 2640 SN# up to 340999), 2630, 300B, 301A, 302, 302A, 310A, 310B, 401B, 401C, JD300, JD301, JD310, JD380, JD400, JD401, JD410, JD480, JD480A, JD480B. (Part No: 119724)		$57.00
Fuel Sending Unit - For model 2010. (Part No: 119719)		$70.00
Fuel Sending Unit -
  • For John Deere tractor models 1640 (s n 430000-Later), 1641, 2040, 2140 (s n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2855< li>
  • Replaces John Deere OEM number AL68201, AL33498, AL38314< li> < UL> (Part No: 119712)
$43.76
Fuel Sending Unit -
  • For John Deere tractor model 2510< li>
  • Replaces John Deere OEM number AR38269< li> < UL> (Part No: 119713)
$79.00
Fuel Sending Unit -
  • For John Deere tractor model 2520< li>
  • Replaces John Deere OEM number AR38806< li> < UL> (Part No: 119714)
$72.22
Fuel Sending Unit -
  • For John Deere tractor models 4030, 4040, 4040S, 4050 (s n 005510-Earlier), 4230, 4240, 4240S, 4350, 4430< li>
  • Replaces John Deere OEM number AR73995< li> < UL> (Part No: 119715)
$46.00
Fuel Sending Unit -
  • For John Deere tractor models 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710< li>
  • Replaces John Deere OEM number LVA12714< li> < UL> (Part No: 119742)
$37.26
Fuel Sending Unit -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520 (all with straddle mount fuel tank)< li>
  • Replaces John Deere OEM number RE190977, SJ304058< li> < UL> (Part No: 119743)
$43.00
Fuel Sending Unit -
  • For John Deere tractor models 4050 (s n 005511-Later), 4055, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4630, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE11127, RE221707, RE19409< li> < UL> (Part No: 119744)
$39.10
Fuel Sending Unit with Pump -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6410, SE6420, SE6520, SE6620, 6010, 6020, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6415, 6420, 6420L, 6420S, 6500, 6500L, 6520L< li>
  • Replaces John Deere OEM number AL113225< li>
  • For use with 30.6 gallon fuel tank< li> < UL> (Part No: 168921)
$181.70
Fuel Shutoff Cable - 66" total length. For tractor models (1030, 1130, 1630 without cab), 1530, 2030, 2040, 2240, (2440, 2640 SN# 341000 and up), 2840, 2940, 830. All with diesel engines. Replaces AL24155, RE10596. (Part No: 161932)$36.00
Fuel Shutoff Cable -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR26785< li>
  • Overall Length: 24"< li>
  • Mount to Mount: 19"< li> < UL> (Part No: 129285)
$47.10
Fuel Shutoff Cable -
  • For John Deere tractor models 940, 1040, 1140, 1640 (With cab, s n 429999-earlier), 1840 (Without cab), 2030 (Without cab), 2040 (With cab, s n 429999-earlier), 2130 (Without cab), 2140 (With cab, s n 429999-earlier), 2150, 2155, 2255, 2350 (Without cab), 2355 (Without cab), 2355, 2355N, 2550 (Without cab), 2555 (Without cab), 2750 (Without cab), 2755 (Without cab), 2840 (s n ending in "T"), 2855, 2940 (Without cab), 2950 (Without cab), 2955 (Without cab), 3030 (Without cab), 3040 (With cab, s n 429999-earlier), 3055, 3130 (Without cab), 3140 (With cab, s n 429999-earlier), 3155 (With lucas or roto pump), 3255, 4030, 4230, 4430 (s n 017499-earlier), 4630 (s n 383898-earlier), 4840, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AL120054, AL16327, AL16817, AL28976, AL36900, AL36901, AL36902, AL36921, AL38885, AL38886, AL41425, AL58239, AL58240, AL58243, AL58247, AL58248, AL58528, AT25387, AT29305, AL36924< li>
  • For Diesel only< li>
  • Overall Length: 83"< li>
  • Mount to Mount: 77"< li> < UL> (Part No: 152818)
$16.40
Fuel Shutoff Valve -
  • For John Deere tractor models 70, 80, 720, 820, 830 (all with pony motor)< li>
  • Replaces John Deere OEM number AF1128R, AF2153R< li>
  • For use with Marvel Schebler carbs TSX245, TSX475, TSX530, TSX562< li>
  • Inlet: 1 8"< li>
  • Outlet: 3 8"< li> < UL> (Part No: 119649)
$43.26
Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1 4 inch NPT inlet, 5 16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Part No: 122256)		$11.50
Fuel Solenoid - For tractor models 3100, 3110, 3200, 3210, 3300, 3310, 3400, 3410, 5200, 5300, 5400, 5500, 6010, 6020, 6100, 6110, 6200, 6210, 6300, 6310, 6320, 6400, 6410, 6420, 6506, 6510, 6520, 6600, 6610, 6800, 6810, 6900, 6910, 6910S, SE6010, SE6020, SE6100, SE6110, SE6200, SE6210, SE6300, SE6310, SE6400, SE6410, SE6510, SE6520, SE6610. All with on of the following engines, 3029D, 4039D, 4045D, 4039T, Powertech 4.5, Powertech 4.5T, 6068D, Powertech 6.8, Powertech 6.8T, or 4045T. Replaces RE54064 (Part No: 119852)		$45.00
Fuel Solenoid - This New Fuel Solenoid is used on John Deere: (COMPACT TRACTOR: 655, 755, 756, 855, 856, 955), (SKID STEER LOADER: 4475, 6675, 7775), (FRONT MOUNT MOWER: F915, F935). Replaces AM124377 (Part No: 161953)		$84.50
Fuel Solenoid -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520< li>
  • Replaces John Deere OEM number AR67706, AT22996, AT31877< li> < UL> (Part No: 150282)
$160.00
Fuel Solenoid -
  • For John Deere tractor models 790, 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4700, 4710< li>
  • Compatible with John Deere Construction & industrial models 35D< li>
  • Replaces John Deere OEM number M810324< li> < UL> (Part No: 161946)
$28.00
Fuel Solenoid -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4955, 4960, 8560, 8760, 8960< li>
  • Compatible with John Deere Harvester(s) 9965, 9970< li>
  • Replaces John Deere OEM number RE53507, RE48622< li> < UL> (Part No: 161950)
$41.50
Fuel Solenoid -
  • For John Deere tractor models 670, 770, 870, 970, 1070< li>
  • Replaces John Deere OEM number AM882277< li> < UL> (Part No: 161954)
$76.00
Fuel Solenoid -
  • For John Deere Construction & industrial model 762B< li>
  • Replaces John Deere OEM number RE504223< li> < UL> (Part No: 161956)
$75.00
Fuel Solenoid -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4955, 4960, 7610 (s n 089999-earlier), 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7810 (s n 089999-earlier), 7810 (s n 090000-later), 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9200, 9300, 9400< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 9500, 9500 SH, 9510, 9550, 9550 SH, 9600, 9610, 9650, 9650 CTS, 9650 STS, 9750 STS< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 9976< li>
  • Replaces John Deere OEM number R89014< li> < UL> (Part No: 161957)
$11.40
Fuel Solenoid -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4955, 4960, 7600, 7610, 7700, 7710, 7800, 7810, 8560, 8760, 8960< li>
  • Replaces John Deere OEM number RE55415< li> < UL> (Part No: 161961)
$46.00
Fuel Solenoid -
  • For John Deere tractor models 7610 (s n 089999-earlier), 7710 (s n 089999-earlier), 7810 (s n 089999-earlier)< li>
  • Replaces John Deere OEM number RE501450< li> < UL> (Part No: 161962)
$46.00
Fuel Solenoid -
  • For John Deere Construction & industrial models 750C, 850C< li>
  • Replaces John Deere OEM number RE55416< li> < UL> (Part No: 161963)
$46.00
Fuel Solenoid -
  • For John Deere Construction & industrial models 690D, 690DR, 693D< li>
  • Replaces John Deere OEM number AT115077< li> < UL> (Part No: 161965)
$81.00
Fuel Stop Cable -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4850, 4955, 7020< li>
  • Replaces John Deere OEM number AR77678, AR65796< li>
  • Overall Length: 54"< li>
  • Mount to Mount: 49-1 4"< li>
  • Stop Shutoff Cable< li> < UL> (Part No: 116887)
$63.00
Fuel Strainer -
  • For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number R10159< li> < UL> (Part No: 150408)
$82.00
Fuel Tank - For tractor models 3010, 3020. POLY TANK. (Part No: 103946)$479.00
Fuel Tank - For tractor models 1830, 2020, 2030, 2120 all european made. Fuel Tank replaces AL 24482, AT31635. Fiberglass Tank. (Part No: 114335)		$720.00
Fuel Tank -
  • For John Deere tractor models 1640, 1641, 1641F, 1840, 2040, 2040S, 2140 (s n 429999-earlier), 2141, 2350, 2541, 2550, 2941< li>
  • Replaces John Deere OEM number AL38858, AL31037, AL37380, AL38853, AL35464< li>
  • For fuel tank cap use 113550< li> < UL> (Part No: 122111)
$430.00
Fuel Tank - For tractor models 4000, 4010, 4020. Fuel Tank made of Poly Type Material. SEAL IS NOT AVAILABLE. Replaces AR39587 (Part No: 103947)		$490.00
Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Part No: 172673)		$7.90
Fuel Tank Cap - Lockable -
  • For John Deere Construction & industrial models 210LE, 310E, 310SE, 315SE, 485E, 486E, 488E< li>
  • Replaces John Deere OEM number AT176378< li> < UL> (Part No: 158598)
$28.76
Fuel Tank Cap - Locking -
  • For John Deere Construction & industrial models 190E, 210CW, 750, 800C, 2054< li>
  • Replaces John Deere OEM number AT321249< li>
  • Locking with 2 keys< li> < UL> (Part No: 163024)
$45.50
Fuel Tank Cap - Locking -
  • For John Deere Construction & industrial models 70D, 80, 110, 120, 120C, 160LC, 180CW, 190E, 200CLC, 200LC, 210CW, 225CLC, 230CLC, 230LCR, 270LC, 290D, 330CLC, 330LC, 370, 490E, 550LC, 590D, 595D, 600C LC, 750, 790D, 790ELC, 800C, 892ELC, 992ELC, 2054< li>
  • Replaces John Deere OEM number 4361638< li>
  • John Deere Excavator Fuel Cap< li> < UL> (Part No: 163025)
$45.50
Fuel Tank Cap - Locking -
  • For John Deere Construction & industrial models 75D, 75G, 85G, 120D, 130G, 135D, 135G, 160DLC, 200DLC, 225DLC, 240DLC, 245GLC, 250GLC, 350DLC, 450DLC, 470GLC, 650DLC, 850DLC< li>
  • Locking with 2 keys< li> < UL> (Part No: 163027)
$45.50
Fuel Tank Cap - Locking -
  • For John Deere Construction & industrial models 27C (ZTS), 27 ZTS, 35C (ZTS), 35 ZTS, 50 (C ZTS), 50ZTS< li>
  • Replaces John Deere OEM number 4363380< li>
  • John Deere Mini Excavator Fuel Cap< li>
  • Locking with 2 keys< li> < UL> (Part No: 163029)
$42.50
Fuel Tank Cap - Threaded -
  • For John Deere Construction & industrial models 300D, 310D, 310G, 310SG, 315D, 315SG, 330, 335, 360D, 400G, 410D, 410G, 430, 435, 437, 455D, 510D, 530B, 535, 540E, 548E, 555B, 555G, 560D, 640E, 643, 643D, 648E, 650G, 653E, 655B, 710D, 740, 740E, 748E, 750B, 750C, 762B, 840, 843, 850B, 862< li>
  • Replaces John Deere OEM number AT156445< li> < UL> (Part No: 158597)
$40.26
Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: 107976)		$34.76
Fuel Tank - Metal -
  • For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 2040 (s n 349999-earlier), 2240 (s n 349999-earlier)< li>
  • Compatible with John Deere Combine(s) 2240 (s n 349999-earlier)< li>
  • Replaces John Deere OEM number AL24219, AR72910, AT31633< li>
  • For fiberglass tank use Item #: 103944< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 146705)
$662.94
Fuel Tank - Metal -
  • For John Deere tractor models 1830 (s n 115792-294961), 2020 (European), 2030 (s n 115792-294961), 2120 (European)< li>
  • Replaces John Deere OEM number AR72868< li>
  • For Fiberglass Tank use Item #: 110984< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 161584)
$385.00
Fuel Tank, Polyethylene - Includes tank, cap, hose, clamps, & filler neck. For tractor models 1520, 2020, 2030, (2440, 2640 up to SN# 340999), 2630, 300B. Add $15 additional shipping per rim due to size and weight. This additional charge will be added to your order. (Part No: 110984)		$550.00
Fuel Tank, Polyethylene - Includes: tank, cap, hose, clamps and filler neck. For tractor models (2440, 2640 from SN# 341000 and above. (Part No: 109719)$546.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: 114940)		$8.99
Fuel Temperature Sensor -
  • For John Deere tractor models 7610, 7710, 7810, 8100T, 8110, 8110T, 8210, 8300T, 8310, 8310T, 8400T, 8410, 8410T, 9100, 9200, 9300, 9400, 9510< li>
  • Compatible with John Deere Combine(s) CTSII, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9650, 9650 STS, 9750 STS< li>
  • Compatible with John Deere Harvester(s) 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 9976, 9986< li>
  • Compatible with John Deere Construction & industrial models 644H, 750CII, 850CII< li>
  • Replaces John Deere OEM number RE506424< li> < UL> (Part No: 186546)
$20.00
Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. For Gas tractors : 1520, 2030, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030. (Part No: 180105)		$23.76
Fuel Water Sensor -
  • For John Deere tractor models 4630, 4730, 5105M, 5105ML, 6100D, 6110D, 6115D, 6120, 6120L, 6125D, 6125E, 6130D, 6140D, 6215, 6220, 6220L, 6230, 6320, 6320L, 6330, 6415, 6420, 6420L, 6430, 6520L, 6615, 6715, 7130, 7220, 7230, 7320< li>
  • Compatible with John Deere Combine(s) S550, 9560 STS, 9570 STS< li>
  • Replaces John Deere OEM number RE519696< li> < UL> (Part No: 168863)
$45.00
Grommet, Fuel Filler - For 50, 520, 530. (Part No: 126662)		$19.99
Grommet, Fuel Filler, Black - For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7 8 inch outside diameter, 2 1 4 inch inside diameter, and 3 1 2 inch diameter on underside lip. (Part No: 109934)		$18.76
Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Part No: 113650)		$17.00
Hose, Air Cleaner -
  • For John Deere tractor models 1550 (Europe), 1640 (s n: 429999-earlier, Europe), 1640 (s n: 430000-later), 1750 (Europe), 1840 (s n: 429999-earlier, Europe), 1850 (Europe), 1850N (Europe), 2040 (s n: 429999-earlier, Europe), 2040 (s n: 430000-later), 2040S (s n: 429999-earlier, Europe), 2040S (s n: 430000-later), 2140 (s n: 429999-earlier, Europe), 2250 (Europe), 2350, 2355, 2450 (Europe), 2550, 2555, 2650 (Europe)< li>
  • Replaces John Deere OEM number L34918< li>
  • Large End I.D.: 2.75"< li>
  • Small End I.D.: 2.375"< li> < UL> (Part No: 176597)
$30.80
Injection Line - #1 Cylinder -
  • For John Deere tractor models 4000 (engine s n 280001-later, with Power Shift or Syncro), 4020 (s n 201000-later, engine s n 280001-later, with Power Shift or Syncro), 4520 (engine s n 245535-303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later)< li>
  • Replaces John Deere OEM number AR51194< li> < UL> (Part No: 162788)
$24.26
Injection Line - #1 Cylinder -
  • For John Deere tractor models 4240S, 4350, 4430 (engine s n 445570-later), 4440 (with 6466TR), 4630 (engine s n 445948-later), 4640 (with 6466AR 07, 08, 09, 10)< li>
  • Replaces John Deere OEM number AR96857, AR69446< li>
  • Tubing with fittings< li>
  • For Cylinder #5 use Item #: 162801< li> < UL> (Part No: 162795)
$37.60
Injection Line - #2 Cylinder -
  • For John Deere tractor models 4000 (engine s n 280001-later, with Power Shift or Syncro), 4020 (s n 201000-later, engine s n 280001-later, with Power Shift or Syncro), 4520 (engine s n 245535-303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later)< li>
  • Replaces John Deere OEM number AR51195< li>
  • For Cylinder #1 use Item #: 162793< li> < UL> (Part No: 162789)
$25.00
Injection Line - #2 Cylinder -
  • For John Deere tractor models 4240S, 4350, 4430 (engine s n 445570-later), 4440 (with 6466TR), 4630 (engine s n 445948-later), 4640 (with 6466AR 07, 08, 09, 10)< li>
  • Replaces John Deere OEM number AR96858, AR69447< li>
  • Tubing with fittings< li>
  • For Cylinder #5 use Item #: 162799< li> < UL> (Part No: 162796)
$37.60
Injection Line - #3 Cylinder -
  • For John Deere tractor models 4000 (engine s n 280001-later, with Power Shift or Syncro), 4020 (s n 201000-later, engine s n 280001-later, with Power Shift or Syncro), 4520 (engine s n 245535-303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later)< li>
  • Replaces John Deere OEM number AR51196< li>
  • For Cylinder #5 use Item #: 162791< li> < UL> (Part No: 162790)
$28.26
Injection Line - #3 Cylinder -
  • For John Deere tractor models 4240S, 4350, 4430 (engine s n 445570-later), 4440 (with 6466TR, s n 003900-earlier), 4630 (engine s n 445948-later), 4640 (with 6466AR 07, 08, 09, 10)< li>
  • Replaces John Deere OEM number AR96859, AR69448, AR96448 < li>
  • Tubing with fittings< li> < UL> (Part No: 162798)
$41.50
Injection Line - #4 Cylinder -
  • For John Deere tractor models 4000 (engine s n 280001-later, with Power Shift or Syncro), 4020 (s n 201000-later, engine s n 280001-later, with Power Shift or Syncro), 4520 (engine s n 245535-303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later)< li>
  • Replaces John Deere OEM number AR51197< li>
  • For Cylinder #1 use Item #: 162793< li> < UL> (Part No: 162791)
$25.80
Injection Line - #4 Cylinder -
  • For John Deere tractor models 4240S, 4350, 4430 (engine s n 445570-later), 4440 (with 6466TR), 4630 (engine s n 445948-later), 4640 (with 6466AR 07, 08, 09, 10)< li>
  • Replaces John Deere OEM number AR96860, AR69449< li>
  • Tubing with fittings< li>
  • For Cylinder #1 use Item #: 162801< li> < UL> (Part No: 162799)
$38.50
Injection Line - #5 Cylinder -
  • For John Deere tractor models 4000 (engine s n 280001-later, with Power Shift or Syncro), 4020 (s n 201000-later, engine s n 280001-later, with Power Shift or Syncro), 4520 (engine s n 245535-303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later)< li>
  • Replaces John Deere OEM number AR51198< li>
  • For Cylinder #1 use Item #: 162793< li> < UL> (Part No: 162792)
$25.80
Injection Line - #5 Cylinder -
  • For John Deere tractor models 4240S, 4350, 4430 (engine s n 445570-later), 4440 (with 6466TR), 4630 (engine s n 445948-later), 4640 (with 6466AR 07, 08, 09, 10)< li>
  • Replaces John Deere OEM number AR96861, AR69450< li>
  • Tubing with fittings< li>
  • For Cylinder #1 use Item #: 162801< li> < UL> (Part No: 162800)
$38.76
Injection Line - #6 Cylinder -
  • For John Deere tractor models 4000 (engine s n 280001-later, with Power Shift or Syncro), 4020 (s n 201000-later, engine s n 280001-later, with Power Shift or Syncro), 4520 (engine s n 245535-303518)< li>
  • Compatible with John Deere Construction & industrial models 600 (engine s n 215000-later)< li>
  • Replaces John Deere OEM number AR51199< li>
  • For Cylinder #4 use Item #: 162789< li> < UL> (Part No: 162793)
$25.76
Injection Line - #6 Cylinder -
  • For John Deere tractor models 4240S, 4350, 4430 (engine s n 445570-later), 4440 (with 6466TR), 4630 (engine s n 445948-later), 4640 (with 6466AR 07, 08, 09, 10)< li>
  • Replaces John Deere OEM number AR96862, AR69451< li>
  • Tubing with fittings< li> < UL> (Part No: 162801)
$37.76
Injection Pump Fuel Plunger -
  • For John Deere tractor models 80, 720, 730 (s n 7200000 - later), 820, 830 (s n 8203100 - later), 840 (s n 8400000 - later)< li>
  • Replaces John Deere OEM number AF279, AF279R< li>
  • Size 13mm Scintilla< li>
  • Sold Individually< li> < UL> (Part No: 129364)
$325.00
Injection Pump Plunger & Barrel - Scintilla -
  • For John Deere tractor models R, 70 (s n 7017500 - later), 80 (s n 8203099 - earlier), 820 (s n 8203099 - earlier), 830 (s n 8203099 - earlier)< li>
  • Replaces John Deere OEM number AR734, AR734R< li>
  • Size is 10MM< li>
  • sold as a set of 2< li> < UL> (Part No: 129362)
$415.00
Injection Pump, Remanufactured, AR94078, Roosa Master, JDB435MB3794 -
  • For John Deere tractor model 2440 (341000 - Later)< li>
  • Replaces John Deere OEM number AR94078< li>
  • Replaces Roosa Master manufacturer number JDB435MB3794< li> < UL> (Part No: 210195)
$1375.01
Injection Pump, Remanufactured, Roosa Master, DBGVC4292DH -
  • For John Deere tractor model 2010< li>
  • Replaces Roosa Master manufacturer number DBGVC4292DH< li> < UL> (Part No: 210790)
$1650.01
Injector Assembly - For tractor models 650, 750. (Part No: 181792)		$83.49
Injector Assembly - For tractor models 950, 1050. (Part No: 185156)$183.57
Injector Chamber, Rear - For tractor models 950, 1050. (Part No: CH11763)$27.52
Injector Nozzle - For tractor models 850, 950, 1050. (Part No: 185869)$33.54
Injector Nozzle - Pencil type injector for 300 Series diesel engines (4-276D, T 6-359D, T, A, 6-414D, T. Injectors marked 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087. For tractor models (2355 3 cylinder), 2555, 2755, 2630, 2640, 2750, 2855, 3255, 4050. Roosa-Master No. 22205 Code 1602 and 1603 replaces RE37503, SE500824, R92351 AR88240 (Part No: 113963)		$29.76
Injector Nozzle - Use with 350 Series diesel engines (3029T 2.9 Powertech, 4.5T.H. High Horsepower, 6.8T.H. High Horsepower. Injectors marked 29279. For tractor models 4700, 5310, 5510, 6110, 6110L, 6210, 210L, 6310, 6310L, 6405, 6410, 6410L, 6510, 6510L, 6605, 7210, 7405, 7410, 7510, 7600, 7610. Pencil type, for 350 series diesel motors. Stamped Id # 28478. Replaces RE48786, SE500826, SE500827, SE501101 (Part No: 113961)		$34.50
Injector Nozzle - Used in 350 Series diesel engines (4.5D, 6.8D). Injectors marked 32262. For model 5410. (Part No: 113959)		$34.00
Injector Nozzle - Nozzle, injector complete. For 300 & 350 Series diesel engines. Tractors: 3400, 5200, 5300, 5400, 5500, 5600N, 6200, 6200L, 6300, 6300L, 6400, 6500. Loader Backhoe: 300D, 310C, 310D, 315C, 315D. Windrowers: 3430, 3830. Sprayers: 6100, 6500, 6600. Injectors marked 28484, 28485. Replaces RE36939, RE38087, SE500821 (Part No: 113964)		$36.26
Injector Nozzle - Used in 300 & 350 Series diesel engines. For tractor models 5200, 5300, 5400, 5400N, 5500, 5500N. Injectors marked 28480, 28481. Replaces RE36935, RE36936, SE500821 (Part No: 113962)		$38.91
Injector Nozzle Nut -
  • For John Deere tractor models 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2510, 2520, 2640, 2750, 2840, 2940, 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5200, 5210, 5300, 5310, 5400, 6030, 7020, 7200, 7210, 7400, 7410, 7510, 7520, 7600, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 9100< li>
  • Compatible with John Deere Combine(s) CTS, 925, 935, 945, 955, 965, 975, 985, 1032, 1042, 1052, 1055, 1065, 1072, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1166, 1177, 1188, 1188H4, 4400, 4420, 4425, 4435, 6620, 7720, 8820, 9400, 9450, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9650< li>
  • Replaces John Deere OEM number R51937< li> < UL> (Part No: 176692)
$3.55
Injector Packing Washer -
  • For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020, 4000, 4020, 4030, 4520< li>
  • Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 7700< li>
  • Replaces John Deere OEM number R34764< li>
  • Inside Diameter: .380"< li>
  • Outside Diameter: .565"< li>
  • Thickness: .128"< li> < UL> (Part No: 176691)
$2.00
Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Part No: 178115)		$37.00
Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Part No: 129312)		$25.50
Injector, Remanufactured, SE500101 -
  • For John Deere tractor models 4840, 8430, 8440< li>
  • Compatible with John Deere Engine(s) 6466A, 6466T< li>
  • Replaces John Deere OEM number SE500101, AR73847< li>
  • Bosch Injector Tip # 0 433 271 895< li>
  • For a New version of this sku use Item #: 165626< li> < UL> (Part No: 210210)
$76.01
Injector Tube -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Harvester(s) 6650, 6750, 6850, 6950, 7200, 7300, 7400, 7500, 7700, 7800< li>
  • Replaces John Deere OEM number RE518339< li> < UL> (Part No: 165657)
$21.50
Locking Fuel Tank Cap -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2140, 2150, 2155, 2240 (s n 350000-later), 2250, 2255, 2350, 2355, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number AL34678< li>
  • For tractors with plastic fuel tanks< li>
  • Fuel Cap - Red use Item #: 113550< li> < UL> (Part No: 121517)
$18.76
Lower Foot Throttle Spring -
  • For John Deere tractor model H< li>
  • Replaces John Deere OEM number H285R< li>
  • Length: 5-3 16"< li>
  • For Upper Foot Throttle Spring use Item #: 169943< li> < UL> (Part No: 169947)
$13.26
Main Nozzle -
  • For John Deere tractor models M, MT, 40, 320, 330
  • Replaces John Deere OEM number 47-288< li> < li>
  • Compatible with Minneapolis Moline tractor models Jet Star 3, 4 Star, 445< li>
  • Replaces Minneapolis Moline OEM number 47-288< li>
  • Replaces Marvel Schebler OEM number 47-288< li>
  • For Marvel Schebler Carburetor number TSX713, TSX245, TSX475, TSX530, TSX633< li> < UL> (Part No: 111513)
$33.95
Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: AAU8491, AR63103, 47P606 (Part No: 118792)		$13.00
Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010. Replaces 233-543. (Part No: 179751)		$5.36
Nozzle -
  • For John Deere tractor models A (s n 477000-later), A (s n 41000-476999), AO (s n 272000-later), AO (s n 250000-271999), AR (s n 272000-later), AR (s n 250000-271999)< li>
  • Replaces John Deere OEM number R10116< li>
  • For DLTX 33, 41, 53, 71, 72 Carbs< li> < UL> (Part No: 112215)
$46.76
Oil Pressure Sending Unit -
  • For John Deere tractor models 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Construction & industrial models 653E, 655, 655B, 750, 750B, 755, 755A, 755B, 850, 850B, 855< li>
  • Replaces John Deere OEM number AT168629, RE15583< li> < UL> (Part No: 121844)
$43.00
Precleaner Assembly - For 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2250, 2450, 2650, 840, 940. Precleaner Assembly. 6.89" Bowl Diameter 2.953" Inlet Diameter 4.921" Body Height. (Part No: 123120)$28.76
Precleaner Assembly - For 2140, 2650, 2650N, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640. Precleaner Assembly is 10.433" Bowl Diameter 3.15" Inlet Diameter 5.512" Body Height. (Part No: 112379)$38.00
Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1 2 inch bowl. Fits models 1010, 1020, 1520, 2020, 320, 330, 420, 430, 440. Replaces AT16837 and AM3672T. (Part No: 186846)		$67.73
Pre Cleaner Assembly - Assembly has a 3 inch pipe and a 10 inch diameter. For the following John Deere Models: 1032, 1042, 1052, 1155, 1157, 1158, 2040S, 2140, 2355, 2450, 2555, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3150, 3155, 3340, 3350, 3640, 3640S, 3650, 952. Replaces AZ24175. (Part No: 112379)		$38.00
Pre-Cleaner Assembly -
  • For John Deere tractor models 1010 (Dsl), 2020 (Dsl), 3010 (Gas), 3020 (Gas s n 122999-earlier), 4010 (Gas), 4020 (Gas)< li>
  • Replaces John Deere OEM number AT170947, AR26416, AR28587< li> < UL> (Part No: 164386)
$76.00
Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 320, 330, 420, 430, 440 gas, 1010 gas, 1020, 1520, 2020. It replaces original part numbers AM3672T, AT16837, AT16838. It has a 2 inch inside diameter plastic base, 5-1 2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Part No: B9NN9A660A)		$67.72
Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: 168690)		$25.99
Red Rubber Cover Only -
  • For John Deere tractor models 50 (s n 5018450-later), 60 (s n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s n 122999-earlier), 4000, 4010, 4020 (s n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010< li>
  • Replaces John Deere OEM number R27183< li>
  • For fuel cap with cover use Item #: 126517< li> < UL> (Part No: 126626)
$17.76
Rubber Fuel Tank Pad -
  • For John Deere tractor models AO (s n 272000-later), AR (s n 272000-later), B (s n 96000-later), BN (s n 96000-later), BNH (s n 96000-later), BW (s n 96000-later), BWH (s n 96000-later), G (s n 13000-later), GH (s n 13000-later), GN (s n 13000-later), GW (s n 13000-later), 60 (Standard s n 604299), 620 (Orchard)< li>
  • Replaces John Deere OEM number B1825R< li>
  • 1-1 2" O.D.< li>
  • 1 2" Thick< li>
  • 1 2" Center Hole< li> < UL> (Part No: 126657)
$5.76
Sediment Bowl Assembly - Large Bowl. 1 8 inch pipe thread to fuel line, 3 8 pipe to tank. For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25 inch bowl. This will replace the AUTOMATIC SHUT OFF assembly with a manual shut off for the late A and B models. Replacement bowl available as part S.65504. (Part No: 105393)		$20.81
Sediment Bowl Assembly - Cast top with glass bowl, all fuel style for use with 3-way valve. For tractor models AO, AR, B, BO, BR, D, G, GP, H. (Part No: 118722)		$45.40
Sediment Bowl Assembly - With Automatic shut-off. For tractor models (50 gas from SN# 5016133 and up), (A gas from SN# 584000 and up), (60 gas from SN# 6028469 and up), 520, 530, 620, 630, (70 gas from SN# 7006494 and up). (Part No: 163282)		$153.00
Sediment Bowl Assembly - Fuel Strainer without valve.This sediment bowl assembly is used on John Deere; 1010 Diesel to serial number 42000 Using 1 8 inch Pipe Outlets, 2010 Diesel serial number 29001 to 42000 Using 1 8 inch Pipe Outlets, 2010 Gas Using 1 8 inch Pipe Outlets. Replaces: AR51418, AT11973 (Part No: 112592)		$27.50
Sediment Bowl Assembly - This sediment bowl assembly has 3 8" pipe inlet and 1 8" pipe outlet. Includes a 5 16" line compression adapter fitting. For M, 40, 320, 330, 420, 430, 440, 1010. Fuel Strainer Assembly with 1.25 inch bowl. Fuel Strainer Assembly with 3 8 inch pipe connection to tank. Replaces AM3100T. (Part No: 105370)		$17.76
Sediment Bowl Assembly -
  • For John Deere tractor models L, LA, LI
  • Replaces John Deere OEM number AL2087T< li> < li>
  • Compatible with Massey Harris tractor models Pacer, Pony (s n 3117-later)< li>
  • Replaces Massey Ferguson OEM number 850839M1, 852241M1< li>
  • 1 8" pipe thread on both ends< li>
  • For Fuel Bowl use Item #: 105364< li> < UL> (Part No: 107944)
$79.00
Sediment Bowl Assembly - Sediment bowl. For tractor models M, 40, 320, 330, 420, 430, 440, 1010, 1010C SN# 15782 or earlier. Might be slightly different than picture. (Part No: 105362)		$18.80
Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1 8 and an overall height of 2 3 8. For the following models using a 2 3 8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Part No: 105365)$4.99
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3 8 Inch center hole. Replaces: L885T (Part No: 105364)		$3.70
Sediment Bowl Screen - 2" -
  • For John Deere tractor models A (Styled & Unstyled), AI (Unstyled), ANH (Styled & Unstyled), AW (Styled & Unstyled), B (Styled & Unstyled), BN (Styled & Unstyled), BNH (Styled & Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled & Unstyled), BWH (Styled & Unstyled), D (Styled & Unstyled), G (Styled & Unstyled), GH (Styled & Unstyled), GM (Styled), GN (Styled & Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel)< li>
  • Compatible with John Deere Combine(s) 55< li>
  • Replaces John Deere OEM number AA519R< li> < UL> (Part No: 121909)
$5.36
Sending Unit, Fuel - Sending Unit, fuel (spade type terminals). For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830 (serial number <294961), 2030 (serial number <294961), 2130 (serial number <294961), 2140, 2240 (serial number <349999), 2840, 3030, 3130, 820 (3 cylinder), 830 (3 cylinder), 920, 930. Replaces AT31619. (Part No: 114952)		$38.00
Single Induction Early Carburetor Kit -
  • For John Deere tractor models A, B, D, G< li>
  • For the following Marvel Schebler Carbs only, please check your number; DLTX5, DLTX6, DLTX8, DLTX11, DLTX13, DLTX16, DLTX24, DLTX31, DLTX38, DLTX51, DLTX7, DLTX18, DLTX19, DLTX24, DLTX33, DLTX39, DLTX53, DLTX3, DLTX6, DLTX16, DLTX63, DLTX5, DLTX15, DLTX17< li>
  • No jets or nozzles< li>
  • Helps complete your carbuteor rebuild< li> < UL> (Part No: 113675)
$46.00
Single Induction Late Carburetor Kit -
  • For John Deere tractor models A, B, 50 (up to sn 5015950), 60 (up to sn 6013899)< li>
  • Replaces John Deere OEM number A258E, AR10075R, R10050R, R10060R, R10078R, 12H64R, 15-223, 21H962R, 21H971R, 21H994R, A765R, R10041R, R10045R, R10049R, R10067R, R10147R, R10151R, R10163R< li>
  • For Marvel Schebler carbs only DLTX67, DLTX71, DLTX72, DLTX73 - Please check your carb number before ordering< li>
  • No jets or nozzles< li>
  • Helps complete your carbuteor rebuild< li> < UL> (Part No: 113674)
$38.00
Solenoid -
  • For John Deere tractor models 3010, 3020, 4010, 4020< li>
  • Replaces John Deere OEM number AR30178, AR52452, AR80564< li> < UL> (Part No: 161663)
$238.00
Solenoid - Fuel / Door -
  • For John Deere Construction & industrial models 544G, 624G, 644G< li>
  • Compatible with John Deere Lawn & Garden(s) F915, F925, F935, 415, 425, 445, 455< li>
  • Replaces John Deere OEM number AM124379, AM103337< li> < UL> (Part No: 135018)
$63.00
Speed Control Plate - With linings. For tractor models (520 from SN# 5208100 and up), (620 from SN# 6213100 and up), (720 from SN# 7214900 and up), 530, 630, 730. Replaces RE227867. (Part No: 121857)$36.95
Speed Control Plate with Linings - For tractor models 50, 60, 70, (520 up to SN# 5208099), (620 up to SN# 6213099), (720 up to 7214899). Replaces R227852. (Part No: 110991)		$30.26
Speed Control Rod - For tractor models: 50, 520, 530. Replaces B3461R, B3984R. (Part No: 179972)$25.76
Speed Control Rod - For Model: B hand start s n 96000 to 200999. (Part No: 179895)$16.50
Speed Control Rod - For tractor models: BO, BR. (Part No: 179974)$33.50
Speed Control Rod - For Model: G. (Part No: 179896)$21.76
Speed Control Rod - For Model: H. (Part No: 179897)$13.26
Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Part No: 178588)		$14.50
Stop Cable -
  • For John Deere tractor models 1550, 1750, 1850, 1950, 1950N
  • Replaces John Deere OEM number AL236923< li> < li>
  • Compatible with Massey Ferguson tractor models 362, 365, 375, 383, 390, 390T, 393, 398< li>
  • Replaces Massey Ferguson OEM number 3701714M91, 3701714M92, 3701714M93< li>
  • Outer Length: 51"< li>
  • Cable Length: 53"< li> < UL> (Part No: 157638)
$21.50
Throttle Cable -
  • For John Deere tractor models 4040, 4050, 4055, 4230, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (all with Sound Guard Cab), 8430 (1974 to 1981), 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number AR56685, RE21571, RE53286< li>
  • Overall Length: 25 1 4"< li>
  • Mount to Mount: 14"< li> < UL> (Part No: 150999)
$38.26
Throttle Handle - Throttle handle for John Deere models A (after serial #584000) and B (after serial #201000) (Part No: 179396)		$48.50
Throttle Handle - For Model: MC. Replaces AM1041T (Part No: 179898)		$54.41
Throttle Handle - For H, M, MT. Replace OEM #H281R. (Part No: 109870)		$42.50
Throttle Knob - Plastic. For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Part No: 125658)		$6.50
Throttle Shaft -
  • For John Deere tractor models 4010, 4020< li>
  • For Marvel Schebler Carburetor USX20< li> < UL> (Part No: 111946)
$26.26
Throttle Shaft -
  • For John Deere tractor models A, B, 50, 60< li>
  • Replaces John Deere OEM number AR10058, DLTX67, DLTX71, DLTX72, DLTX73< li> < UL> (Part No: 126748)
$21.99
Turbocharger - For model 6403. (Part No: 155507)$709.99
Turbocharger - John Deere ENGINE: 6059T, 6068T, 6359T, 6414T ALL with Eng. Code 6506. Replaces RE30067, 466980-9001 (Part No: 113355)$756.00
Turbocharger - For tractor models CTS, 9500, 9500SH, 9600 all with SN<5655536. Relpaces RE36285, RE30562. (Part No: 113354)$795.00
Turbocharger - This Turbocharger replaces equipment marked: AR64626, RE16971, AR100241, RE10968, RE16968, RE41920, AR96259, RE16967, RE20167, AR87421 The Oil Inlet Center Is 1 4" Tapered Pipe. 2 Bolt Mount Threads Are M8 Metric Thread. The Oil Drain Threads Are 3 8" Thread. Replaces RE19780, RE19779, AR83439, AR73626, AR101784, RE18989, AR91131. Fits the following when applicable: 644C, 644D, 646C, (690B Engine S N 512306>), 690C, 690CR, 740, 740A, 762A, 762B, 770A, 770B, 770BH, 772A, 772B, 772BH, 790, 792, 850B, 4250, 4350, (4430 Engine S N 512306>), (4440 Engine S N <027605 TB4129 Turbo Model), (4450 TB4129 Turbo Model), 4630, (4640 Engine S N 027605- 282880 TB4129 Turbo Model), (4650 TB4129 Turbo Model), (4840 Engine S N 027605- 282880 TB4129 Turbo Model), (4850 TB4129 Turbo Model), (7020 Engine S N 335846>), (8430 Model Year 1974-1981 Engine S N 027605- 282880 TB4129), (8440 Engine S N 027605- 282880 TB4129 Turbo Model), (8450 Engine S N 027605- 282880 TB4129 Turbo Model) Includes Gaskets. (Part No: 101158)		$338.90
Turbocharger - This Turbo Charger is used on 6602 (Engine S N <512305), 7700 (Engine S N <512305), 5200 (Engine S N <335845), 5400 (Engine S N <335845), 644, 644A, 646, 646B, 690, 690A, 690B (Engine S N <512305), 693B, 4320 (TO4B15 Turbo Model), 4430 (Engine S N <512305), 4520 (TO4B15 Turbo Model), 4620 (TO4B15 Turbo Model), 7020 (Engine S N <335845). Includes Gasket. It replaces John Deere Part numbers: AR51427, AR54931, 409250-5002S, 409250-5002, AR58756, AR63780, AR63698, AR68137, AR68143, AR68139, AR51207, AR61860 (Part No: 101155)		$354.00
Turbo to Elbow Adapter - For tractor models 4040, 4040S, 4050, 4240, 4240X, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 550, 555, 644, 644A, 644B, 646, 646B, 6600, 6602, 6620, 6622, 690, 690A, 690B, 7020, 740, 7700, 7720, 8430, 8440, 8820, 9940, 5720. Turbo to Elbow Adapter. (Part No: 101611)		$44.90
Upper Foot Throttle Spring -
  • For John Deere tractor models H, HNH, HWH< li>
  • Replaces John Deere OEM number H286R< li>
  • Length: 6-1 4"< li>
  • For Lower Foot Throttle Spring use Item #: 169947< li> < UL> (Part No: 169943)
$13.26
Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Part No: 183845)		$10.02
Water Separator Element - Water separator element~ for diesel fuel systems. Used on tractors: 4050, 4650, 4850, 8430, 8440, 8630, 8640. For 4050, 4650, 4850, 8430, 8440, 8630, 8640. Also used in applications of other manufacturers. Replaces AR86755, LFF1131, 1020302M1, 1048547M91, 703631, 71367686, 74024223. Note part may not be Baldwin brand as pictured. (Part No: 120086)		$29.26
 
Gauges
Amp Gauge - This gauge is white face for tractor models A, B, D, G, H. Amp Gauge. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, white faceplate and a black bezel. Replaces OEM #s AM354T, AB2568R, AB1190R. (Part No: 150258)		$24.99
Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Part No: 150259)		$22.00
Cable - Tachometer, AR60877 -
  • For John Deere tractor model 4030< li>
  • Replaces John Deere OEM number AR60877< li>
  • Length: 30"< li> < UL> (Part No: 161989)
$24.20
Fiber Optic Lead - This fiber optic lead is 8 inches long. It is used on the following tractors with side console: 2520, (3020 Serial Number 12300 and up), 4000, (4020 Serial Number 201000 and up), 4520. Replaces original part number AR48016 (Part No: 124181)		$37.10
Fuel Gauge - This Fuel Gauge is used multiple John Deere tractors and combines. It is a 12 volt illuminated gauge with a 2.047 inch body outside diameter. The length of the gauge is 1.87 inches. It replaces original John Deere part numbers AL24187, AL18155, AL24294 (Part No: 101919)		$26.70
Fuel Gauge - This fuel gauge is for 12 Volt NEGATIVE Ground Systems Only, Gas or Diesel. For 2 inch outside diameter opening, 1 1 2 inches thick gauge housing. It is 30 To 250 OHM Rating. Used on the following: 2520, (3020 serial number 123000 and up), (4020 serial number 201000 and up), 4320, 4520, 4620, (500A serial number 123114 To 152141), 500B, (5020 serial number 025000 and up), 6030, 7020, 7520; Replaces: AR45436, AT375294 (Part No: 108062)		$43.50
Fuel Gauge -
  • For John Deere tractor models 1010 (s n 42000-earlier), 2010 (s n 42000-earlier), 3010, 4010, 8020< li>
  • Compatible with John Deere Construction & industrial models 760< li>
  • Replaces John Deere OEM number AR26716< li>
  • Positive Ground< li>
  • Housing Depth: 1.205"< li>
  • 0-72 OHM< li> < UL> (Part No: 151076)
$54.00
Fuel Gauge -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 8450, 8560, 8650, 8760, 8850, 8960, 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE11046< li>
  • 12 Volt< li> < UL> (Part No: 164303)
$103.00
Fuel Gauge -
  • For John Deere tractor models 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T< li>
  • Replaces John Deere OEM number RE61184< li>
  • 12 Volt< li> < UL> (Part No: 164304)
$133.00
Fuel Gauge, 12V - This Fuel Gauge is 12 Volt Negative ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 5010, (5020 up to SN# 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Negative Ground or it will not work and damage the gauge. Housing depth is 1.205 inches. (Part No: 155405)		$42.86
Fuel Gauge, 12V - 12 Volt Positive ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to Serial Number 122999), 4010, (4020 up to Serial Number 200999), 5010, (5020 up to Serial Number 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Positive Ground or it will not work and damage the gauge. (Part No: 160956)		$53.00
Fuel Gauge - 12V Negative Ground - 2 prong -
  • For John Deere tractor models 2010, 2510, 3010, 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier), 5010, 5020 (s n 24999-earlier)< li>
  • Replaces John Deere OEM number RE53664, R34262, AT27153, AR46271< li>
  • For 12 volt negative ground generator systems< li>
  • For 12V Negative Ground Alternator Systems use Item #: 155405< li> < UL> (Part No: 140623)
$33.76
Fuel Gauge 12 Volt -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730, 820, 830< li>
  • Replaces John Deere OEM number AF2739R, AF2170R< li>
  • Plug Style< li>
  • 12 Volt< li> < UL> (Part No: 160361)
$33.76
Fuel Gauge, 12 Volt - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12 24 volt electric start), (820 2 cylinder, 830 2 cylinder 12 24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, positive ground system. Replaces: AF2721R (Part No: 121633)		$35.76
Fuel Gauge, 12-Volt Negative Ground - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12 24 volt electric start), (820 2 cylinder, 830 2 cylinder 12 24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, Negative ground system. Replaces: AF2721R that has been changed to Negative Ground. (Part No: 140602)		$52.00
Fuel Gauge, 6 Volt - This 6 volt positive ground fuel gauge is used on the following two cylinder diesel tractors with pony start motors: 70, 720, 730, 80, 820, 830. The gauge reads from 0 - 30 Ohms. Replaces original part numbers AF2170R, AF2739R (Part No: 140603)		$41.99
Fuel Gauge & Sending Unit -
  • For John Deere tractor models 70, 720, 730 (all Diesel)< li>
  • Replaces John Deere OEM number AF2739R, AF2173R< li>
  • 12 Volt < li>
  • Negative Ground< li>
  • Includes Fuel Gauge, Sending Unit< li>
  • Aftermarket Part< li>
  • The ring on the sending unit AND the gauge need to be grounded to the frame or other ground< li> < UL> (Part No: 108056)
$99.00
Fuel Sending Unit - Fuel Tank Sending Unit for tractor models (3020 Serial number 123, 000 and up), (4000 and 4020 serial number 201, 000 and up), 4320 and (Industrial 600 serial number 201, 000 and up). (Part No: 115547)$51.00
Fuel Sending Unit - This fuel sending unit is used on the following 2 cylinder tractors: 520, 530, [620, 630 (General Purpose, Standard or Orchard.)], [70, 720, 730 (Gas, LP, and Diesel)], 80, 820, 830, 840. It will work for 6 or 12 volt, positive or negative ground providing the appropriate gauge is used. This fuel sending unit is properly calibrated to the original resistance, 0 to 30 OHMs. It replaces original part numbers AB5139R, AF2173R, AR1112R (Part No: 159048)		$66.40
Fuel Sending Unit - This fuel sending unit fits the following tractor models: 500 (Gas serial number 67999 and below), 860 and 860A (serial number 001000 and below), 3010, 3020 (serial number 122999 and below), 4010, 4020 and 600 (serial number 200999 and below). Replaces part number AR26434. (Part No: 115030)		$59.33
Gauge Cluster - This instrument gauge cluster is for models 1040, 1140, 1640, 1840, 2040, 2040S, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2640, 2750, 2755, 2940, 2950, 3040, 3140. (Part No: 121707)		$227.20
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1 4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: 178318)		$57.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: 178285)		$40.00
Instrument Gauge Cluster -
  • For John Deere tractor models 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710< li>
  • Replaces John Deere OEM number LVA10560, AM122798, LVA10308< li> < UL> (Part No: 146694)
$290.00
Instrument Gauge Cluster, Remanufactured, RE16427 -
  • For John Deere tractor models 4050 (s n 005260-later), 4250 (s n 0009383-later), 4450 (s n 019204-later), 4650 (s n 010690-later), 4850 (s n 008758-later), 8450 (s n 0005059-later), 8650 (s n 007101-later), 8850 (s n 006014-later)< li>
  • Replaces John Deere OEM number RE16427, RE16441, RE66828< li> < UL> (Part No: 207116)
$810.01
Instrument Gauge Cluster, Remanufactured, RE239420 -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number RE239420, RE42545, RE66843, RE66844, RE24513, RE49192, RE66842< li> < UL> (Part No: 205334)
$810.01
Oil Gauge - Screw in type Oil Gage with Black face. For tractor models M, 40, 320, 330, 420, 430. Does not have John Deere Logo. (Part No: 152857)		$25.00
Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1 8 inch NPT female to 3 16 inch tubing female. It is used on some gauges without removable fitting. (Part No: 178157)		$3.95
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8 inch pipe thread to 1 8 inch tube. Brass. (Part No: 179540)		$17.50
Oil Pressure Gauge -
  • For John Deere tractor models 70, 80, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number AF2729R, AF2868R< li>
  • Black Face< li>
  • Black Bezel< li>
  • 0-55 PSI< li> < UL> (Part No: 152858)
$35.76
Oil Pressure Gauge -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 8450, 8560, 8650, 8760, 8850, 8960, 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE61185< li> < UL> (Part No: 164302)
$97.00
Oil Pressure Gauge - For tractor models A, B, D, G, UNSTYLED. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. This oil pressure gauge has a metal base, glass lens and a black bezel. This gauge does not have studs and is designed to screw into the governor or oil filter base. This oil pressure gauge is a mechanical gauge. The measurement of the threaded fitting is 1 8” NPT male thread. Replaces OEM #s Replaces: AM737T, AB292R, AA1730R (Part No: 150255)		$22.00
Oil Pressure Gauge - For tractor models A, B, D, G, STYLED. Oil Pressure Gauge without John Deere logo, on white face. With studs. Replaces AB1549R (Part No: 150254)		$25.99
Oil Pressure Gauge - For tractor models: 50, 60, 70, 520, 530, 620, 630, 720, 730, all gas engines. Oil Pressure Gauge Black Face. Does NOT have "John Deere" on the face. Comes with studs. This oil pressure gauge has a metal base, glass lens and a black bezel. This is a dash mounted gauge and includes the studs and mounting bracket. This is a mechanical gauge. The measurement of the threaded fitting is 1 8 NPT. Replaces OEM #s AF2775R and AF2752R. (Part No: 150253)		$23.26
Tachometer - This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Part No: 150247)		$110.50
Tachometer - For tractor models 1010 single row crop, row crop, orchard, grove, row crop utility and utility versions. Replaces AT16682, AT17443, AT17448. (Part No: 185313)		$182.00
Tachometer - Tachometer. Fits John Deere - 1020, 1520, 1530, 2020, 2030, [ 2040, 2240 (Up to SN: 349999) ], 2440 (Up to SN: 340999), 2630, 2640 (up to SN: 340999), Industrial: 300 (Up to SN; 131260), 300B, 301, 301A, 302, 302A, 400 (Up to SN: 131260), 401, 401A, 401B, 401C; Replaces: AR50954, AR65445, AT159296, AT20641, T22409 (Part No: 115571)		$191.00
Tachometer - Speed Hour Meter (Tachometer). Fits John Deere - 2010 (Gas, LP, and Diesel with SN: 29001 & up. Will fit earlier serial numbers but the MPH reading is different. Used on all Rowcrop and Rowcrop Utility.); Replaces: MPH reading is different: AT11892, AT16678, AT17444, Serviceable: AT17778 (Part No: 125552)		$200.00
Tachometer -
  • For John Deere tractor models 4040, 4230, 4240, 4430, 4630< li>
  • Replaces John Deere OEM number AR60513< li>
  • Syncro Range Tractors< li>
  • 4.380" Diameter< li> < UL> (Part No: 140657)
$172.00
Tachometer Bracket - For tractor models 50, (A from SN# 648000 and above), (B from SN# 201000 and above), (AO, AR from SN# 272000 and above), 60. (Part No: 126741)		$43.26
Tachometer Cable - 33" long. For tractor models 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: 159054)		$16.00
Tachometer Cable - 56 inches total length, threaded ends are 5 8-18 x 7 8-18, one Keyed & one Square end. For tractor models 420, 430, (440 gas), 8440, 8630, 8640. Also replace AR70112. (Part No: 110181)		$35.50
Tachometer Cable - 23" total length. For tractor models 1020, 1130, 1530, 1630, 820, 830, (2040, 2240 SN# up to 349999). Replaces AT19905. (Part No: 121539)$18.00
Tachometer Cable - For tractor models 50, (A from SN# 648000 and above), (AO, AR from SN# 272000 and above), (B from SN# 201000), G, 60, (70 gas). Replaces AB4765R, AB4776R. (Part No: 101923)		$45.50
Tachometer Cable - For tractor models (70 diesel), (720 diesel). Replaces AR21160R, AF3258R, AF2248R, AF2067R. (Part No: 108021)$36.99
Tachometer Cable - For model 520. Replaces AB5242R, AB5135R. (Part No: 107800)		$39.90
Tachometer Cable - For model 530 gas and all-fuel. Replaces AR20829R. (Part No: 107800)		$39.90
Tachometer Cable - For model 620 gas or LP. (Part No: 108021)		$36.99
Tachometer Cable - For model 630. Replaces AR21234R. (Part No: 121345)		$41.26
Tachometer Cable - For model 720 gas & LP. (Part No: 108021)		$36.99
Tachometer Cable - For model 730 gas. Replaces AR20839R. Length of 17.75" from tip to tip of inner cable. OUTER SHEATH LENGTH = 17 1 4" (Part No: 108021)		$36.99
Tachometer Cable - For model 730 diesel. (Part No: 122469)$43.50
Tachometer Cable - For tractor models 80, (820, 830 2 cylinder). (Part No: 121541)		$39.99
Tachometer Cable - This tach cable comes in a PVC sheath. Varies in length by manufacturer from 24.4 to 25.5 Inches long. For models 1520, 1630, 1635, 1830, 2020, 2035, 2040, 2240, 2140 2130, 2135, 2440, 3640, 2630, 300B, 301A, 302, 400, 401. Replaces: AL23838, AT19904 (Part No: 121540)		$17.40
Tachometer Cable - This Tachometer Cable is 39-1 2 inches over all length, 5 8 - 18 threads x 7 8 - 18 threads with Key on one end. Used on John Deere Tractors: 4040, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8640. Also Fits John Deere Combine 6600, 6602, 7700. (Part No: 121542)		$32.00
Tachometer Cable -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number AR38341< li>
  • Length: 22"< li> < UL> (Part No: 121544)
$17.26
Tachometer Cable -
  • For John Deere tractor models 4230, 7020< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123114-152141), 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR60876< li>
  • Length: 36"< li>
  • Load End:< li>
  • Drive End:< li> < UL> (Part No: 121545)
$29.76
Tachometer Cable -
  • For John Deere tractor models 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number AT27372< li>
  • Overall Length: 27"< li>
  • Mount to Mount: 23-1 2"< li> < UL> (Part No: 121546)
$27.00
Tachometer Cable Core -
  • For John Deere tractor models 3010, 3020 (s n 122999-earlier), 4000, 4010, 4020, 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 600< li>
  • Replaces John Deere OEM number AR28589< li>
  • Length: 32.5"< li>
  • Square drive end: 0.104"< li>
  • Round end: 0.155"< li>
  • Round end shoulder: 0.200"< li> < UL> (Part No: 121543)
$16.00
Tachometer Cable with grommet -
  • For John Deere tractor models 1520, 1630, 1635, 1830, 2020, 2030, 2035, 2040 (s n 349999-earlier), 2120, 2130, 2135, 2240 (s n 349999-earlier), 2440 (s n 340999-earlier), 2630, 2640 (s n 340999-ealier)< li>
  • Compatible with John Deere Construction & industrial models 300B, 301A, 302, 302A, 400, 401A, 401B, 401C< li>
  • Replaces John Deere OEM number AL23838, AT19904< li>
  • Length: 25.59"< li>
  • Load End: .625" male thread< li>
  • PVC Sheath with grommet< li>
  • For cable less grommet use Item #: 121540< li> < UL> (Part No: 122464)
$22.10
Tachometer Drive Gear - This 11 tooth tachometer drive gear drives off of the camshaft. Please note that you must install this on the original tachometer drive (John Deere never sold this separately). It measures: 1.040 inches outside diameter, 0.245 inches center hole, and 0.655 inches wide. It fits the following tractor models: 1010C, 2010C, 420, 430, 440, 1010, 2010, and various combine, power units, and cotton pickers. Please verify OEM part number. This will also replace AM3130T. (Part No: 179567)		$84.00
Tachometer for Power Shift Transmission - This Tachometer is used on the following John Deere Tractors with Power Shift Transmissions: 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. Used with Tach Cable AR21085 (not included). Replaces R50652, AR60514, RE206861, RE152798, AR80826 (Part No: 160952)		$205.89
Tachometer for Quad-Range Transmission - This Tachometer is used on the following John Deere tractors with Quad-Range Transmission: 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. It is used with Tach cable AR21085 (not included). It replaces AR60515, RE206860, R50652 (Part No: 160953)		$205.89
Tachometer Gauge -
  • For John Deere tractor models 2840, 3030, 3130< li>
  • Replaces John Deere OEM number AL30805, AL19692, AL24776< li>
  • Max RPM: 2500 < li>
  • Base RPM: 2100< li>
  • Gear Ranges: 6< li>
  • Diameter: 4.528"< li>
  • Length: 3.583" < li> < UL> (Part No: 118461)
$112.00
Tachometer Knob -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520< li>
  • Replaces John Deere OEM number AR40802, AR30282< li> < UL> (Part No: 126743)
$11.66
Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853 (Part No: 117361)		$87.00
Tachometer With Red Needle - This tachometer with red needle was used thru 1968. It has no provision for illumination or fiber optics. It is used on the following Gas & Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855, AR50402 (Part No: 114510)		$132.35
Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas & Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Part No: 121304)		$87.00
Tachometer With Red Needle - This tachometer with red needle was used thru 1968. It has no provision for illumination or fiber optics. It is used on the following Gas & Diesel Tractors with Power Shift transmission: 4000, 4520, 4620, (4020 up to serial number 250000), Industrial: 600. Replaces original part numbers: AR32827, AR39902, AR45445, AR48022, AR50403, AR50407, RE206857 (Part No: 114509)		$183.00
Tachometer With White Needle - This tachometer with white needle has provision for fiber optic light and illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853. (Part No: 121302)		$194.00
Tachometer With White Needle - This tachometer with white needle has the provision for illumination and fiber optics. It is used on the following Gas & Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855 (Part No: 121305)		$194.00
Tachometer With White Needle - This tachometer with white needle has a provision for fiber optic light and illumination. It is used on the following Gas & Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Part No: 121626)		$152.00
Tachometer With White Needle - This tachometer with white needle has a provision for illumination and fiber optics. It is used on the following Gas & Diesel Tractors with Power Shift transmission: 4000, 4520, 4620, (4020 up to serial number 250000), Industrial: 600. Replaces original part numbers: AR32827, AR39902, AR45445, AR48022, AR50403, AR50407, RE206857 (Part No: 121303)		$194.00
Temperature Gauge - For tractor models 820, 830 (s n 268527-later), 920, 930 (s n 268527-later), 1020, 1030 (s n 268527-later), 1120, 1130 (s n 268527-later), 1630 (s n 268527-later), 1830 (s n 268527-later), 2020, 2030 (s n 268527-later), 2040 (s n 268527-349999), 2130 (s n 268527-later), 2240 (s n 268527-349999), 2840 (s n 268527-later), 3030 (s n 268527-later), 3120, 3130 (s n 268527-later) This is an electronic gauge. (Part No: 104117)		$19.40
Temperature Gauge - This temperature gauge has a 53 inch lead a 0.854 inch housing depth. It does not have a provision for fiber optic light. Fits 8020 (1964 & Up), (1010 Crawler and 2010 Crawler Serial number 42001 and up; gas & diesel). Replaces: AT17524 (Part No: 182666)		$52.00
Temperature Gauge - This temperature gauge has a 49-1 2 inch lead and a 0.892 inch housing depth. It does not have a provision for fiber optic light. Used on (1010, 2010 up to serial number 42000 gas and diesel), (8020 thru 1963). Replaces: AT11934, AT14203 (Part No: 182667)		$51.00
Temperature Gauge -
  • For John Deere tractor models 820, 830 (s n 268526-earlier), 920, 930 (s n 268526-earlier), 1020, 1030 (s n 268526-earlier), 1120, 1130 (s n 268526-earlier), 1630 (s n 268526-earlier), 1830 (s n 268526-earlier), 2020, 2030 (s n 268526-earlier), 2120, 2130 (s n 268526-earlier), 3030 (s n 268526-earlier), 3120, 3130 (s n 268526-earlier)< li>
  • Replaces John Deere OEM number AL24293< li> < UL> (Part No: 121628)
$34.96
Temperature Gauge -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4020 (s n 201000-later), 4320, 4520, 4620, 7020< li>
  • Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 7700< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123114-152141), 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR45435, AR48640< li>
  • Lead length: 26"< li>
  • Not backlit< li>
  • For backlit version use Item #: 108064< li> < UL> (Part No: 164168)
$62.00
Temperature Gauge -
  • For John Deere tractor models 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T< li>
  • Replaces John Deere OEM number RE61186< li> < UL> (Part No: 164300)
$119.00
Temperature Gauge -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 8450, 8560, 8650, 8760, 8850, 8960, 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE11048< li> < UL> (Part No: 164301)
$116.00
Temperature Gauge -
  • For John Deere Construction & industrial models 340D, 350, 350B, 350C, 350D, 355D, 380, 410B, 415B, 440C, 440D, 444, 444C, 444CH, 444D, 448D, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 510B, 515B, 540B, 540D, 540E, 544, 544A, 544B, 544C, 544D, 548D, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 610, 610B, 640, 640D, 640E, 643, 643D, 644, 644A, 644B, 644C, 644D, 646, 648D, 690B, 693B, 710B, 740, 740A, 740E, 740G, 743, 743A< li>
  • Replaces John Deere OEM number AT104755< li> < UL> (Part No: 176352)
$81.55
Temperature Gauge -
  • For John Deere tractor models 1010, 2010, 8010< li>
  • Replaces John Deere OEM number AT17524< li> < UL> (Part No: 182671)
$51.00
Temperature Gauge, AA883R -
  • For John Deere tractor models A (s n 476999-earlier), B (s n 166999-earlier), D (s n 125430-143799), G (s n 12999-earlier), H< li>
  • Replaces John Deere OEM number AA883R, AA3538R< li>
  • Metal Base< li>
  • Glass Lens< li>
  • Black Bezel< li>
  • White Face< li>
  • Lead Length: 23"< li> < UL> (Part No: 150250)
$41.26
Temperature Gauge Black Face -
  • For John Deere tractor models A (styled), D (styled), G (styled), M (mid 1952-later), R (mid 1952-later), 40 (1952-later), 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number AM3950T, AA6295R, AA7263R, AF2192R, AF2774R, AM2444T, AM3092T, AR20783, AT13849T< li>
  • Black Bezel< li>
  • Black Face< li>
  • Lead Length: 48"< li>
  • For temperature gauge with a white face use 150249< li> < UL> (Part No: 150248)
$23.30
Temperature Gauge - White Face -
  • For John Deere tractor models A (styled), B (s n 60000-306600), D (styled), G (styled), M (mid 1952-earlier), R (mid 1952-earlier)< li>
  • Replaces John Deere OEM number AM2444T, AA1342R, AA3534R, AA3535R< li>
  • Black Bezel< li>
  • White Face< li>
  • Lead Length: 48"< li>
  • For temperature gauge with a black face use 150248< li> < UL> (Part No: 150249)
$31.50
Temperature Sending Switch - For tractor with warning light. For tractor models 650, 655, 750, 755, 850, 855, 950, 955, 1050. Replaces CH10267, CH15516, 121250-44901 (Part No: 168193)		$22.18
Tractormeter - For 1030, 1130, 1630, 1830, 2030, 2130. Tractormeter - 8 speed. Double Needle Gauge. Cable available, must be ordered with separately . Use cable part # AL23837 without cab or AL23838 with cab. (Part No: 124052)		$58.76
Transmission Gauge -
  • For John Deere Construction & industrial models 444, 544B, 644B, 646, 646B (s n 223645-later), 655, 655B (s n 731273-earlier), 750B (s n 731273-earlier), 755, 755A, 755B (s n 731273-earlier), 850B (s n 731273-earlier), 855< li>
  • Replaces John Deere OEM number AT39735, AT149005< li> < UL> (Part No: 153076)
$83.00
Transmission Oil Pressure Gauge - JD Power Shift Transmission Pressure Gauge for JD 600 Industrial, 500, 2510, 3020 up to SN # 122999, 4020 up to SN # 200999, 500A up to SN # 123113 Replaces: R34259. Measures 2.030 inches OD and 1 8 inch NPT male thread. (Part No: 160955)$52.30
Transmission Oil Temperature Gauge - For tractor models 2510, (3020 up to SN# 122999), (4020 up to SN# 200999). (Part No: 108065)		$38.50
Transmission Oil Temperature Gauge - For tractor models (3020 SN# 123000 and up), (4020 SN# 201000 and up), 4320, 4520, 4620. (Part No: 108063)		$44.00
Voltmeter -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 8450, 8560, 8650, 8760, 8850, 8960< li>
  • Replaces John Deere OEM number RE11049, RE63060C< li> < UL> (Part No: 164305)
$98.00
Water Temperature Gauge - For tractor models 3010, 4010. (Part No: 108060)		$45.00
Water Temperature Gauge - For tractor models 2520, (3020 SN# 123000 and up), 4000, (4020 SN# 201000 and up), 4320, 4520, 4620, 7020. (Part No: 108064)		$45.00
Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Part No: 150251)		$31.26
Water Temperature Gauge - This water temperature gauge has a 29inch lead. Max temperature is 250 degrees and minimum is 100 degrees. It has no provision for fiber optic light. It has a 2.045 inch housing diameter and a 2.324 inch bezel diameter. Fits John Deere - [ 2510, 5010 (For Gas & Diesel through 1968) ], 3020 (For gas & Diesel through 1968 (up to SN: 122999)), 4020 (For gas & Diesel through 1968 (up to SN: 200999)), 5020 (For Gas & Diesel through 1968 (up to SN: 024999)); Replaces: AR36383, R34263 (Part No: 108061)		$37.50
Water Temperature Gauge - This water temperature gauge has a 29 inch capillary lead a 2.036 inch housing outside diameter It has no provision for fiber optic light. Fits 3010, 4010 gas and diesel. Replaces: AR26720, AR31901 (Part No: 108060)		$45.00
Water Temperature Gauge - For tractor models A, B, D, G and H. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 3 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5 8 inch 18 NF end with a 1 2 inch NPT pipe bushing. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. OEM #s AA3538R and AA883R. (Part No: 150256)		$29.99
Water Temperature Gauge - For tractor models A, B, D, G and H. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5 8 inch 18 NF end with a 1 2 inch NPT pipe bushing. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. Replaces OEM #s AM610T, AM1609T and AA1342R. (Part No: 150257)		$31.50
Water Temperature Gauge - For 50, 60, 70, 520, 530, 620, 630, 720, 730. Water Temperature Gauge without John Deere logo on black face. Comes with 36" lead. (Part No: 150252)		$31.26
Water Temperature Gauge - This temperature gauge is for models 50, 60, 70, 520, 530, 620, 630, 720, 730. This gauge has a plain face without a John Deere logo. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5 8 inch 18 NF end with a 1 2 inch NPT pipe bushing. Replaces OEM #s: AR490R, AT13849T, AR20783R, AM2444T, AA7263R, AA6295R, R3814. (Part No: 150251)		$31.26
Water Temperature Sending Unit - This Water Temperature Sending Unit is used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650, 5103, 5103E, 5105, 5200, 5203, 5205, 5210, 5215, 5220, 5300, 5303, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420N, 5500, 5510, 5515, 5515V, 5520N, 5600, 5610, 5615V, 5700, 6010, 6100, 6110, 6200, 6200L, 6205, 6210, 6210L, 6215, 6300, 6300L, 6310, 6310L, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6415, 6500, 6500L, 6505, 6510, 6510L, 6515, 6520, 6600, 6605, 6610, 6615, 6620, 6715, 6800, 6900, 7405, 7500, 7505, 840, 940. It replaces John Deere part numbers RE515494, RE51774, AZ15473, AL24527, DE12465 (Part No: 158985)		$15.00
 
Hitch / Drawbar
3 Point Adjustable Upright Assembly - For tractor models 520, 530, 620, 630, 720, 730 except Hi-Crop. Replaces AF2676R (handle), AF2706R, AF2707R, B2804R, DA5883A, F2670R, F2671R, F2673R, F2674R, F2675R, F2676R, F2679R, JD7759, 11H218, 12H303, 14H785, 16H1419 (rivet pin), 19H1901, 34H78, 34H118, 34H152. (Part No: 126545)		$295.00
3 Point Return Spring -
  • For John Deere tractor models 420 (Specialty Utility & Industrial), 435< li>
  • Compatible with John Deere Construction & industrial models 420 (Specialty Utility & Industrial), 430< li>
  • Replaces John Deere OEM number M3168T< li> < UL> (Part No: 125689)
$56.90
3 Point Return Spring -
  • For John Deere tractor models 40 (Standard s n 69582-later, Utility s n 62733-earlier; LH Side 320S), 330 (Standard), 420 (Standard), 430 (Standard), 1010 (Single Crop Row s n 42000-earlier)< li>
  • Replaces John Deere OEM number M2421T< li>
  • 17-3 8" Long< li> < UL> (Part No: 125690)
$58.00
3 Point Return Spring -
  • For John Deere tractor models 40 (Utility s n 62734-later), 320, 330, 420 (All utility and used on the RH side of standard tractor with dual touch-o-matic), 430 (Used on the RH side on standard tractor with dual touch-o-matic), 730 (Utility)< li>
  • Replaces John Deere OEM number M2593T< li> < UL> (Part No: 125692)
$56.99
Adapter - Adaptor Pin & Bushing, adapts top link TP-AR34208 to tractors: 520, 530, 620, 630, 720, 730, 3010, 4010. Pin 4" usable length, 3 4" diameter, bushing .90" outer diameter, .765", inner diameter 1.750" long. For 3010, 4010, 520, 530, 620, 630, 720, 730. (Part No: 112555)$12.76
Adjustable Lift Link - This Adjustable Lift Link (Leveling Arm) is used on John Deere 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5095MH, 5100M, 5100MH, 5100ML, 5105M, 5105ML, 5115M, 5115ML. It is used on the Left or Right side. Adjustable Length 24 to 27 inches, Hole 0.75 inch, Slot 3 inches. Replaces L200878, R244053, 58M7000, R245738, 34M7036, RE254607, R249538 (Part No: RE245477)		$162.92
Adjustable Upright Lock -
  • For John Deere tractor models 420, 430< li>
  • Replaces John Deere OEM number M2735T< li> < UL> (Part No: 125725)
$22.26
Alternator - Bosch(12810) -
  • For John Deere tractor models 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5403< li>
  • Replaces John Deere OEM number RE234714< li>
  • Replaces manufacturer number 12810< li>
  • Replaces Bosch manufacturer number 0124110008, ALRACE1< li>
  • Style: Bosch< li>
  • Voltage: 12< li>
  • Rotation: < li>
  • Amperage: 40< li>
  • Regulator: Internal< li>
  • Pulley: Single Groove B-Belt< li> < UL> (Part No: 189293)
$138.00
Arrester -
  • For John Deere tractor models 4030, 4040, 4040S (s n 347554-earlier), 4050, 4055, 4230, 4240, 4240S (s n 347554-earlier), 4250, 4255, 4430, 4455< li>
  • Replaces John Deere OEM number R51897< li> < UL> (Part No: 170310)
$19.80
Bottom Yoke -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730 (Except Hi-Crop)< li>
  • Replaces John Deere OEM number F2670R< li> < UL> (Part No: 125731)
$114.00
Bushing, Rockshaft -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320 (Europe), 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420 (Europe), 6420, 6420L, 6420S (Europe), 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7220, 7320, 7420, 7515, 7520< li>
  • Replaces John Deere OEM number L79234< li>
  • Flange Height: 0.138"< li>
  • Flange Outside Diameter: 2.933"< li>
  • Inside Diameter: 2.572"< li>
  • Length: 3.091"< li>
  • Outside Diameter: 2.764"< li> < UL> (Part No: 170548)
$43.55
Cable - Shift Control, AR39677, R33318 -
  • For John Deere tractor models 3020 (With Power Shift s n 122999-earlier as transmission shift control cable), 5010, 5020, 6030 (as PTO control cable)< li>
  • Replaces John Deere OEM number AR39677, R33318< li>
  • Length: 41"< li> < UL> (Part No: 114690)
$120.00
Cable - Shift Control, AR54617 -
  • For John Deere tractor model 4630 (with Power Shift Transmission)< li>
  • Replaces John Deere OEM number AR54617< li>
  • Length: 47-1 2"< li> < UL> (Part No: 162037)
$91.00
Cat III Top Link - For tractor models 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8650. Assembly consists of the following items: (1) RE44561 , (1) RE44559 , (1) RE50533 & (1) R64084 This part adjusts from 26.50 to 38 inches center to center on the pins. This assembly requires a 1.250 inch pin, not included. Replaces original part numbers AR78229, AR93043 and RE44558 (Part No: 102074)		$227.00
Center Link Assembly - For 520, 530, 620, 630, 720, 730. Center Link Assembly. Assembly consists of one of each of the following items: AF2873R, AR21917R, AF2798R & AF2799R. (Part No: 102073)		$305.00
Center Link Assembly - Includes link body, front & rear ends, and handle. For tractor models JD301, JD401, 1020, 1520, 2020, (300B, 302A, 401C SN# up to 362024), (2440, 2640 SN# up to 340999), (301A, 302, 401B SN# up to 362024), (401D with non telescoping draft links). Replaces: T22028, AT19795, AT19796 and T22008. (Part No: 164847)		$150.90
Center Link Assembly - For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8440, 8450, 8640, 8650. (Part No: 102074)$227.00
Center Link Assembly -
  • For John Deere tractor models 7720, 7820, 7920, 8120, 8220, 8320, 8420, 8520< li>
  • Replaces John Deere OEM number AR191286< li> < UL> (Part No: 167630)
$288.80
Center Link Assembly -
  • For John Deere tractor models 4000 (s n 250001-earlier), 4020 (s n 250001-earlier), 4230 (Hi-Crop), 4240 (Hi-Crop, s n 006627-later), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop, s n 013166-later), 8430< li>
  • Replaces John Deere OEM number RE44560< li> < UL> (Part No: 170299)
$194.50
Center Link Assembly (Cat III) - Consisting of the following items: (1) R80052, (1) RE56211, (1) AR74181 and (1) R66297. This Category III top link assembly is used on John Deere 4250, 4255, 4440 serial number 013167 and up, 4450, 4455 (Part No: 126892)		$280.00
Center Link Assembly - Cat IV -
  • For John Deere tractor models 8130, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8310RT, 8320R, 8320RT, 8330, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8370R, 8370RT, 8430, 8530< li>
  • Replaces John Deere OEM number RE278964, R710680, RE280348< li>
  • Assembly Includes RE278964 (Link End), R710680 (Link Body), RE280348 (Link End)< li>
  • Cat IV< li> < UL> (Part No: 159792)
$485.00
Center Link Body - Part number R47067 measures 10.750 inches long. It has 1.375 inch -8 thread. Left hand thread on one side, right hand thread on the other. Used on John Deere: 4000 Serial Number 250001 and up, 4020 Serial Number 250001 and up, 4230 HI-CROP, 4320, 4430 HI-CROP, 4440 Serial Number 013166 and below, 4520 Serial Number 010019 and up, 4620, 4630 Serial Number 030390 and below, 5020 Serial Number 028137 and up, 6030, 7020, 7520. (Part No: 170285)		$92.40
Center Link Body -
  • For John Deere tractor models 4555, 4560, 4630 (s n 030391-later), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 8430 (s n 004504-later, Model year 1974-1981), 8440, 8450, 8560, 8570, 8630 (s n 006170-later), 8640, 8650, 8760, 8770, 8850, 8960, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T< li>
  • Replaces John Deere OEM number RE50533, R107281, R64083, R70589< li> < UL> (Part No: 170010)
$48.50
Center Link Body -
  • For John Deere tractor models 2941, 2951, 3141, 3351, 3641, 3651, 4000 (s n 250001-later), 4020 (s n 250001-later), 4040 (s n 002862-earlier), 4230, 4240 (s n 006627-earlier), 4320, 4430, 4455< li>
  • Replaces John Deere OEM number R51524, R47887< li>
  • Length: 12.25"< li>
  • Thread: 1.375"- 8, UNC Left Hand Right Hand< li> < UL> (Part No: 170290)
$112.50
Center Link Body Only -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s n 201000-later), 4010, 4020, 4020 (s n 201000-later), 4030, 4230, 4520, 5010, 5020< li>
  • Replaces John Deere OEM number R47524, R26811< li>
  • Length: 10.75"< li>
  • Thread: 1.250"- 7, UNC LH RH< li> < UL> (Part No: 170288)
$91.70
Center Link Body with Handle - For tractor models 520, 530, 620, 630, 720, 730. Center Link Body with Handle. (Part No: 170522)$141.00
Center Link End -
  • For John Deere tractor models 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520< li>
  • Replaces John Deere OEM number RE206750< li>
  • M42 x 4.5 Right Hand Thread< li> < UL> (Part No: 163469)
$194.00
Center Link End -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AF2798R< li>
  • 1-1 4" x 7 Left Hand Thread< li> < UL> (Part No: 170268)
$96.00
Center Link End -
  • For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number RE44561, AR76114, AR87888< li>
  • Thread: Left Hand< li>
  • Pin Hole : 1.264"< li> < UL> (Part No: 170302)
$187.00
Center Link End -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR26527< li>
  • 1-1 4" x 7 Left Hand Thread< li> < UL> (Part No: 170515)
$98.00
Center Link End - Cat 3 -
  • For John Deere tractor models 7210, 7410, 7420, 7510, 7600, 7610, 7700, 7710, 7810< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Replaces John Deere OEM number RE56212< li>
  • Tractor end< li> < UL> (Part No: 115213)
$92.00
Center Link End, Hook -
  • For John Deere tractor models 4000 (s n 250001-later), 4020 (s n 250001-later), 4040, 4230, 4320, 4430, 4440< li>
  • Replaces John Deere OEM number AR61659< li>
  • 1.375 " - 8 Right Hand UNC Thread< li> < UL> (Part No: 170270)
$170.00
Center Link End, Tractor Side - Used on John Deere models: 4250, 4255, 4440, 4450, 4455. This Top Link end is used on the tractor side. It has a 1.268 inch pin hole and 1.375 inch 8 Left Hand Tread. Replaces AR74181, AL39749. (Part No: 170272)		$177.50
Center Link Handle -
  • For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 500, 600, 700A< li>
  • Replaces John Deere OEM number R42495, R27007< li> < UL> (Part No: 164548)
$12.20
Center Link Handle -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number T22008< li> < UL> (Part No: 170313)
$18.20
Complete Non-Adjustable Lift Link Assembly - Left Hand -
  • For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number R48595, T25836< li>
  • Fit left hand side< li>
  • Rod Length: 21-3 4"< li>
  • Min Max Length: 24" 31"< li>
  • For assembly with 17.5" rod use Item #: 111346< li> < UL> (Part No: 130489)
$87.00
Crank Handle Lock -
  • For John Deere tractor models 40, 320, 330, 420, 430, 1010< li>
  • Replaces John Deere OEM number M2492T< li> < UL> (Part No: 126180)
$22.00
Draft Link Assembly - This Draft Link Assembly has multiple adjustments from 14 inches to 16 1 2 inches. Cat I. Used on John Deere 5050E, 5055E, 5060E, 5065E, 5075E, 5210, 5303, 5403, 5503. Replaces RE265483 (Part No: 165200)		$385.00
Draft Link Assembly, Left Side - This is a Left Side, Hook style draft link. It is used on 6020, 6090MC, 6090RC, 6100D, 6100MC, 6100RC, 6105M, 6110J, 6110MC, 6110RC, 6115D, 6115J, 6115M, 6120, 6120L, 6125J, 6125M, 6130, 6130D, 6130J, 6135J, 6220, 6220L, 6230, 6230 Premium, 6320, 6320L, 6330, 6330 Premium, 6405, 6415, 6420, 6420L, 6420S, 6430, 6430 Premium, 6520, 6520L, 6530, 6534, 6605, 6615, 6620, SE6020, SE6120, SE6220, SE6320, SE6420, SE6520, SE6620. Replaces AL163905. $30 addtional shipping is required on this part due to weight. This will be included in your shipping total. (Part No: 160109)		$355.00
Draft Link Assembly, Right Side - This is a Right Side, Hook style draft link. It is used on 6020, 6090MC, 6090RC, 6100D, 6100MC, 6100RC, 6105M, 6110J, 6110MC, 6110RC, 6115D, 6115J, 6115M, 6120, 6120L, 6125J, 6125M, 6130, 6130D, 6130J, 6135J, 6220, 6220L, 6230, 6230 Premium, 6320, 6320L, 6330, 6330 Premium, 6405, 6415, 6420, 6420L, 6420S, 6430, 6430 Premium, 6520, 6520L, 6530, 6534, 6605, 6615, 6620, SE6020, SE6120, SE6220, SE6320, SE6420, SE6520, SE6620. Replaces AL163906. $30 addtional shipping is required on this part due to weight. This will be included in your shipping total. (Part No: 160109)		$355.00
Draft Link Bushing - This Draft Link Bushing is used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 2040, 2150, 2155 (serial number below 651779), 2240, 2255, 830(3 Cyl.), 840, 930, 940 (Part No: 152041)		$11.16
Draft Link Bushing -
  • For John Deere tractor models 1640, 1641, 1641F, 1830, 1840, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2140, 2141, 2350, 2541, 2550, 2750, 2840, 2940, 2941, 2950, 3030, 3040, 3120, 3130, 3135, 3140, 3141, 3340, 3641< li>
  • Replaces John Deere OEM number L26941< li> < UL> (Part No: 151028)
$11.06
Draft Link, Early - Left Hand -
  • For John Deere tractor models 4000 (s n 201000-later), 4010, 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4320< li>
  • Replaces John Deere OEM number AR65382, AR26945, RE44094, AR26554< li>
  • Replaces John Deere Casting number R26907, R106780< li> < UL> (Part No: 165786)
$440.00
Draft Link End -
  • For John Deere tractor models 7200, 7210, 7400, 7410< li>
  • Replaces John Deere OEM number RE46707< li>
  • Catagory II< li>
  • With Ball< li>
  • LH or RH Side< li> < UL> (Part No: 153443)
$185.00
Draft Link End Lock Plate -
  • For John Deere tractor models 7200, 7210, 7400, 7405, 7410, 7600, 7610 (s n 089999-earlier), 7630, 7700, 7710 (s n 089999-earlier), 7720, 7730, 7800, 7810 (s n 089999-earlier), 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number R127161< li> < UL> (Part No: 153449)
$45.26
Draft Link Support -
  • For John Deere tractor models 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5083EN, 5093EN, 5101EN, 5103, 5105, 5203, 5205, 5210, 5303, 5310, 5310N, 5403, 5410, 5510, 5510N< li>
  • Replaces John Deere OEM number R141682< li> < UL> (Part No: 167895)
$49.00
Draft Link with Hook, Left Side - This part is used on John Deere 6170R, 6175M, 6175R, 6190R, 6195M, 6195R, 6210R, 6215R. Replaces AL201760. 48 inches. For a right side, order 159790. $20 additional shipping is required on this part due to the weight. (Part No: 164840)		$290.00
Draft Link with Hook, Right Side - This part is used on John Deere 6170R, 6175M, 6175R, 6190R, 6195M, 6195R, 6210R, 6215R. Replaces AL201759. 48 inches. For a left side, order 164840. $20 additional shipping is required on this part due to the weight. (Part No: 159790)		$290.00
Drawbar - For model 50. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Holes on the hitch side are 5 8 inches diameter and located 1-1 2 and 4-3 8 inches on center from end. Holes on the tractor side are 0.950 inches and are locates 1-5 8, 3-5 8 and 7-5 8 inches on center from the end. Used in 49A34R & 49A35. Replaces 49B70R. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 109566)		$48.00
Drawbar - For model M and MT. Clevis type hitch bar. (Part No: 126335)		$180.00
Drawbar - This Drawbar has a 2 inch offset. It is 45.625 inches long, 3.000 inches wide and 1.500 inches high. Holes are 1.031 inches in diameter and are located at 1.656, 2.963, 5.532 and 8.581 inches from the front. It replaces original John Deere part number R61184. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 108946)		$214.00
Drawbar -
  • For John Deere tractor models 4000, 4020, 4030, 4040, 4230, 4320, 4430< li>
  • Replaces John Deere OEM number R80842< li>
  • Offest without hammerstrap holes< li>
  • Length: 45.00"< li>
  • Width: 2.50"< li>
  • Thickness: 1.375"< li>
  • 6 front holes 1.015" diameter. 1.375", 2.625", 4.687", 7.345", 9.325", 12.590" from the front< li> < UL> (Part No: 108948)
$145.30
Drawbar -
  • For John Deere tractor models 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520< li>
  • Replaces John Deere OEM number R36608< li>
  • Length: 63.250"< li>
  • Width: 3"< li>
  • Height: 1-1 2"< li>
  • Offset: 2.25"< li>
  • Hole Spacing: (2) 1.312" diameter holes @ 2.130" & 5.380" from front< li> < UL> (Part No: 110313)
$412.10
Drawbar -
  • For John Deere tractor models 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630< li>
  • Replaces John Deere OEM number R50984< li>
  • Length: 63.250"< li>
  • Width: 3"< li>
  • Height: 1.750"< li>
  • Offset: 1.87"< li>
  • Hole Spacing: 1.312" diameter holes @ 2.730" & 4.540" from front< li> < UL> (Part No: 110327)
$306.91
Drawbar -
  • For John Deere tractor models 2510 (Row-Crop), 2520 (Row-Crop), 3010< li>
  • Replaces John Deere OEM number R27692< li>
  • 45.00" long< li>
  • 2.00" Wide< li>
  • 1.25" Thick< li>
  • 1.875" Offset< li>
  • Four .765" diameter holes @ 1.440", 2.440", 7.440" and 12.690" from front< li> < UL> (Part No: 112181)
$173.00
Drawbar -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number R130638< li>
  • Length: 57-3 4"< li>
  • Width: 3"< li>
  • Height: 2"< li>
  • 1.78" Offset< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114350)
$260.00
Drawbar -
  • For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1750, 1950, 2020, 2120, 2150, 2155, 2255, 2355< li>
  • Replaces John Deere OEM number T29898< li>
  • .796" dia front holes< li>
  • Holes are 1.250", 2.880", 8.690" from front< li>
  • Length: 36.750"< li>
  • Width: 2.000"< li>
  • Height: 1.250"< li> < UL> (Part No: 124951)
$99.10
Drawbar - Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, & 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855. Replaces R61126 (Part No: 110255)		$109.90
Drawbar - 2.50 Offset 1.375 x 2.50 x 49.250 1.010 Holes at 1.420, 3.790, 9.410, 11.220, & 15.60 For 2955 (From S#632322), 3055, 3155 (From S#632322), 3255 (Part No: 122091)$225.00
Drawbar - Straight 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, and 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430. (Part No: 108947)$128.00
Drawbar - 2 Offset with Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: 108521)$161.70
Drawbar - 2 Offset without Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: 178339)$197.00
Drawbar - 2 Offset 1.50 x 3 x 45.625 1.031 Holes at 1.656, 2.963, 5.532, & 8.581 For tractor models 4050, 4050 Hi-Crop, 4055 with Cat II, 4240, 4250, 4250 Hi-Crop, 4255 with Cat III, 4440, 4450 with Wide Swing. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 108946)$214.00
Drawbar - 1.750 Offset 1.750 x 3 x 63.375 1.312 Holes at 1.812 & 4.312. For tractor models 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960. Replaces R62081. $30 additional shipping on this part due to size and weight. This will appear in your shipping total. (Part No: 110000)		$264.72
Drawbar Assembly -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6500, 6500L, 6510L, 6510S, 6605, 6615, 6715, 7220, 7320< li>
  • Replaces John Deere OEM number L114953, L79894, L41540, L78501< li>
  • Mounting Bolts Included< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162245)
$415.00
Drawbar Bushing -
  • For John Deere tractor models 6405, 6415, 6605, 6615, 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7815, 7820, 7920< li>
  • Replaces John Deere OEM number R95612< li>
  • 1.360" O.D.< li>
  • 1.107" I.D.< li> < UL> (Part No: 153447)
$8.10
Drawbar - Category 2 -
  • For John Deere tractor models 7630, 7720, 7730, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number R297784, R182326< li>
  • Length: 45"< li>
  • Width: 3"< li>
  • Height: 1.5"< li>
  • Drop: 1.5"< li>
  • Hole Diameter: 1.25"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164251)
$580.00
Drawbar - Category 2 -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R< li>
  • Replaces John Deere OEM number R303167< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164256)
$580.00
Drawbar - Category 3 -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8300T, 8310, 8310R, 8310T, 8320, 8320R, 8320RT, 8320T, 8330T, 8335R, 8345R, 8345RT, 8360R, 8360RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8520, 8520T< li>
  • Replaces John Deere OEM number R297781< li> < UL> (Part No: 164249)
$290.00
Drawbar - Category 3 -
  • For John Deere tractor models 7630, 7720, 7730, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number R297786, R182327< li>
  • Length: 45 3 8"< li>
  • Width: 3"< li>
  • Height: 2"< li>
  • Drop: 1 1 2"< li>
  • Hole Diameter: 1 1 2"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164252)
$760.00
Drawbar - Category 3 -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R< li>
  • Replaces John Deere OEM number R303165< li>
  • Length: 50-1 4"< li>
  • Width: 3"< li>
  • Thickness: 2"< li>
  • Hole Diameter: 1-11 16"< li>
  • Offset: 1-1 2"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164254)
$810.00
Drawbar - Category 3 -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R< li>
  • Replaces John Deere OEM number R303166< li> < UL> (Part No: 164255)
$810.00
Drawbar - Category 3 -
  • For John Deere tractor models 8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R< li>
  • Replaces John Deere OEM number R341405< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164260)
$925.00
Drawbar - Category 3, Heavy Duty -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R, 7630, 7720, 7820< li>
  • Replaces John Deere OEM number R297787, R228958< li>
  • Length: 45 1 4"< li>
  • Width: 3"< li>
  • Height: 2"< li>
  • Drop: 1 1 5"< li>
  • Hole Diameter: 1 5 8"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164253)
$670.00
Drawbar - Category 4 -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R (s n 000101-053099), 8230, 8230T, 8235R (s n 016001-090000), 8245R (s n 000101-053099), 8260R (s n 016001-090000), 8270R (s n 000101-053099), 8285R (s n 016001-090000), 8295R (s n 000101-053099), 8295RT (s n 900101-907100), 8300, 8300T, 8310, 8310R (s n 016001-090000), 8310RT (s n 902501-912000), 8310T, 8320, 8320R (s n 000101-053099), 8320RT (s n 912001-later), 8320RT (s n 900101-907100), 8320T, 8330, 8330T, 8335R (s n 016001-090000), 8335RT (s n 902501-912000), 8345R (s n 000101-053099), 8345RT (s n 912001-later), 8345RT (s n 900101-907100), 8360R (s n 016001-090000), 8360RT (s n 902501-912000), 8370RT (s n 912001-later), 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8430T, 8520, 8520T, 8530< li>
  • Replaces John Deere OEM number R171367, R297783< li>
  • Length: 57-3 4"< li>
  • Width: 4"< li>
  • Thickness: 2-1 4"< li>
  • Hole Diameter: 2-1 16"< li>
  • Offset: 2-1 2"< li> < UL> (Part No: 110203)
$852.00
Drawbar Clevis Assembly -
  • For John Deere tractor models 7630, 7720, 7730, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8245R (8270R), 8270R, 8295R, 8300, 8310, 8310R, 8320, 8330, 8345R, 8400, 8410, 8420, 8430< li>
  • Replaces John Deere OEM number RE150870, RE159503< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 125650)
$265.00
Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Part No: 155460)		$55.00
Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Part No: 155460)		$55.00
Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Part No: 155461)		$8.50
Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Part No: 155461)		$8.50
Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Part No: 155462)		$7.10
Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Part No: 155462)		$7.10
Drawbar Hammerstrap - Add $10 additional shipping due to weight. For tractor models 6800, 6810, 6900, 6910, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7510, 7520, 7530, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8330, 8345, 8400, 8410, 8420, 8430, 8520, 8530. (Part No: 128174)$88.20
Drawbar Hammerstrap - The Hammerstrap is used with R36608, R50984, R61184, R51771 Drawbars. It Replaces RE19375, AR35912, AR74170, AR35912 (Part No: 109529)$104.00
Drawbar Hammerstrap -
  • For John Deere tractor models 4050 (Hi Crop), 4250 (Hi Crop), 4450, 4455, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (From S N 25000), 6030, 7020, 7520, 8430, 8630< li>
  • Replaces John Deere OEM number R80447, AR53877, RE19377< li>
  • 2" Drawbar opening< li>
  • For 1-3 8" Drawbar Pin< li>
  • Used with R50984 or R62081 Drawbars< li> < UL> (Part No: 109693)
$80.90
Drawbar Hammerstrap -
  • For John Deere tractor models 8770, 8870, 8960, 8970, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number R110306< li>
  • Hitch Pin Diameter: 2"< li> < UL> (Part No: 116941)
$179.00
Drawbar Hammerstrap -
  • For John Deere tractor models 6100, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6415, 6420, 6500, 6510, 6600, 6605, 6615, 6715, 7220, 7320< li>
  • Replaces John Deere OEM number L78501< li>
  • 9.5" Long< li>
  • 1" Thick< li>
  • 2.25" Wide< li> < UL> (Part No: 117357)
$54.70
Drawbar Hammerstrap -
  • For John Deere tractor models 7630, 7720, 7730, 7820, 7830, 7920, 7930, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8245R, 8270R, 8295R, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8330, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8520< li>
  • Replaces John Deere OEM number R132544, R537390< li> < UL> (Part No: 117584)
$117.00
Drawbar Hammer Strap - .75" thick. For tractor models 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5410, 5420, 5420N, 5500, 5510, 5520, 5520N, 820 3 cylinder, 830 3-cylinder. (Part No: 159136)		$67.80
Drawbar Hammerstrap Pin - T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Part No: 128172)		$29.26
Drawbar Hammerstrap Spacer -
  • For John Deere tractor models 6100, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6415, 6420, 6500, 6510, 6605, 6615, 6715, 7220, 7320< li>
  • Replaces John Deere OEM number L79895< li>
  • 4.75" Long< li>
  • 1.75" High< li>
  • 1.5" Wide< li> < UL> (Part No: 117355)
$51.00
Drawbar Hanger - Used on John Deere models 4000, 4020, 4040, 4230, 4320, 4430, 4455, this hanger is used with RE20663 & R80843 drawbars. (Part No: 108905)		$186.41
Drawbar Lift Link - This drawbar lift link fits the following tractor models: M with 24 inch tires. It measures 11 inches from center to center on the pin holes. There are 2 used per tractor and they are priced individually. (Part No: 126341)		$45.76
Drawbar Lift Link - This Drawbar Lift Link is 14 inches center to center on the pin holes. It is used on John Deere; M Serial number 45344 and up up with 26 inch tires, and MT with 34 inch tires. Two used per tractor. Sold individually. Replaces AM1081T, AM1568T. (Part No: 126342)		$47.00
Drawbar Lift Link - This Drawbar Lift Link is 11 inches center to center on the pins. It is used on John Deere M with 24 inch tires. It replaces AM470T (Part No: 126341)		$45.76
Drawbar Lift Link Pin with Spring -
  • For John Deere tractor model M< li>
  • Replaces John Deere OEM number AM504T, M687T< li>
  • Length to Head 2.175"< li>
  • Overall Length (Including Head) 2.375"< li>
  • Diameter 0.400"< li> < UL> (Part No: 126343)
$16.76
Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, & 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. This additional charge will be added to your order. Drawbar pin available as part# L32016. (Part No: 108511)		$126.00
Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 & 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Part No: 121854)		$130.30
Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 & 2.310 & 4.360 & 7.050 & 9.050 & 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight size. This additional charge will be added to your order. (Part No: 110260)		$132.00
Drawbar, Offset - Has 2.125" Offset. Size is 1.375 x 2.50 x 40.875" Has 1.016 Holes located at: 1.062, 2.687, 6.187, & 7.812 inches. For 2840, 2940, 2950, 2955, 3150. (Part No: 110001)		$144.30
Drawbar Pin - This Drawbar Pin is used on John Deere 820, 920, 1020, 1120, 1520, 2020, 2120, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 300B. It replaces AT19850 (Part No: 155271)		$42.50
Drawbar Pin - Front -
  • For John Deere tractor models SE6920, 1654, 1854, 6140R, 6145J, 6150R, 6165J, 6170R, 6180J, 6800, 6810, 6820, 6830, 6900, 6910, 6920, 6930, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7515, 7520, 7530, 7530E, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number R113145, L76089< li>
  • Length: 4.213"< li>
  • Diameter: 1.063"< li> < UL> (Part No: 153451)
$24.26
Drawbar Pin, Front - For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Part No: 121855)		$40.26
Drawbar Pin, Front - Used on John Deere 2510 Row Crop, 2520 Row Crop and 3010 tractors, the diameter of this pin is 0.750 inches. Replaces John Deere part number AR26415 (Part No: 128126)		$33.76
Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Part No: 121853)		$17.76
Drawbar Pin, Front -
  • For John Deere tractor models 2840, 2940, 2950, 2955, 3055 (s n 632322-later), 3150, 3155 (s n 632322-later), 3255 (s n 632322-later)< li>
  • Replaces John Deere OEM number L37225< li> < UL> (Part No: 170282)
$17.76
Drawbar Pin Plug -
  • For John Deere tractor models SE6920, 1654, 1854, 6140R, 6145J, 6150R, 6155J, 6165J, 6170M, 6170R, 6180J, 6800, 6810, 6820, 6830, 6900, 6910, 6920, 6930, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7515, 7520, 7530, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number L76136< li>
  • Thread Diameter: 1.181"< li>
  • Thread Length: .433"< li>
  • Overall Length: .984"< li>
  • Head Diameter: 1.394" < li>
  • Front drawbar pin plug< li> < UL> (Part No: 153790)
$7.46
Drawbar Pivot Pin - For tractor models 320, (A from SN# 561903 and above), (B from SN# 186134 and above), 50, 520, 530, 60, (620 up to SN# 13099), 40, 330, 420, 430, (M, MT with swinging drawbar). Replaces B2198R. (Part No: 126345)		$35.00
Drawbar Pivot Pin - For tractor models (620 from SN# 13100 and above), (G from SN# 18700 and above), 630, 70, 720, 730. Replaces F856R, AF1318R. (Part No: 126344)		$31.90
Drawbar - Rear, Curved -
  • For John Deere tractor models 6800, 6900, 7200, 7210, 7400, 7405, 7410, 7420, 7505, 7510, 7520, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Compatible with John Deere Harvester(s) 6810, 6910, 7200, 7400, 7800< li>
  • Replaces John Deere OEM number L76093, L115073, R113145< li>
  • Length: 43.81"< li>
  • Width: 3"< li>
  • Thickness: 1-1 2"< li> < UL> (Part No: 114875)
$280.00
Drawbar - Rear, Curved -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6500, 6500L, 6510L, 6510S, 6605, 6615, 6715, 7220, 7320< li>
  • Replaces John Deere OEM number L114953, L114167, L78996< li>
  • Length: 45"< li>
  • Width: 2-1 2"< li>
  • Thickness: 1-1 2"< li>
  • Offset: 1-1 2"< li>
  • Tractor End Hole Diameter: 1.016"< li>
  • Towed End Hole Diameter: 1.3"< li> < UL> (Part No: 159087)
$260.00
Drawbar - Rear, Curved -
  • For John Deere tractor models 5103, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5325 (Standard Duty), 5400, 5410, 5420, 5425 (Standard Duty), 5500, 5510, 5520, 5525 (Standard Duty), 5603 (Standard Duty), 5625 (Standard Duty)< li>
  • Replaces John Deere OEM number R133359, R105240, RE178644< li>
  • 29.50" Length< li>
  • 2" Offset< li>
  • 1.25" Thickness< li>
  • 2.50" Width< li> < UL> (Part No: 159094)
$162.00
Drawbar - Rear, Straight -
  • For John Deere tractor models 5105, 5205, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5415, 5420, 5500, 5510, 5520, 5525, 5603, 5615, 5625, 5715, 5725< li>
  • Compatible with John Deere Harvester(s) 5200, 5400< li>
  • Replaces John Deere OEM number R105240, RE178644< li>
  • Length: 22.62"< li>
  • Width: 2.50"< li>
  • Thickness: 1.25"< li>
  • Hole Spacing: 1.281", .687", .687", .781", .781", .791"< li> < UL> (Part No: 114546)
$119.00
Drawbar Rear Support Bracket LH - Used on John Deere 4055, 4250, 4255, 4350, 4440, 4450, 4455. Replaces John Deere part numbers AR96600, R64749, John Deere Casting number R72870. Includes pins. (Part No: 180480)		$182.00
Drawbar Rear Support Bracket RH - Used on John Deere 4055, 4250, 4255, 4350, 4440, 4450, 4455. Fits John Deere Tractor(s) 4055, 4250, 4255, 4350, 4440, 4450, 4455, Replaces John Deere part numbers AR96599, R64750. John Deere Casting number R72869. Pins included. (Part No: 180478)		$175.00
Drawbar Reinforcement -
  • For John Deere tractor models 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420< li>
  • Fits Wheel Tractors With Standard 2" x 3" Drawbars< li>
  • Adjustable For Drawbar Settings< li> < UL> (Part No: 123323)
$463.25
Drawbar Reinforcement -
  • For John Deere tractor models 8130, 8230, 8245R, 8270R, 8295R, 8330< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 123324)
$463.30
Drawbar Support -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520< li>
  • Replaces John Deere OEM number RE178644< li> < UL> (Part No: 161247)
$700.00
Drawbar Support Load Sensing Bushing - Used with AR76096 and AR83603 Front Drawbar Supports, this bushing replaces John Deere part numbers R71476 and R41084 (Part No: 168089)		$21.76
Drawbar Support, Rear - This is a New Rear Drawbar Support used on John Deere 4050, 4055, 4240, 4240S, 4250, 4255. It replaces original part number AR74165 (Part No: 165849)		$355.00
Drawbar Support Spacer - Used on John Deere Tractors 4050, 4055 with Regular Drawbar, 4250 with Cat 3 Narrow, 4255 with Regular or Cat 3 Narrow Drawbar, 4440 with Regular Drawbar, 4450 with Cat 3 Narrow, 4455 with Cat 3 Narrow. (Part No: 110118)		$27.00
Drawbar Support Spacer -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7500, 7505, 7510, 7515, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number L76092< li> < UL> (Part No: 153786)
$32.10
Drawbar Swing Control Pin -
  • For John Deere tractor models 6800, 6810, 6820, 6830, 6900, 6910, 6920, 6930, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7515, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number R95613< li> < UL> (Part No: 153781)
$14.26
Drawbar, Swinging - This Drawbar has a 2.50 Inch Offset, 45.00 overall length, 2.50 inches wide, 1.375 inches thick. Additional $10 shipping due to size and weight. This additional charge will be added to your order. Replaces original part numbers R34448, RE20663 (Part No: 108521)		$161.70
Evener Bar Upper Link Knuckle -
  • For John Deere tractor models A, B, G, 50, 60, 70< li>
  • Replaces John Deere OEM number 31583A< li> < UL> (Part No: 126354)
$58.76
Eyebolt -
  • For John Deere tractor models 4050, 4055, 4240, 4240S (s n 347554-earlier), 4250, 4255< li>
  • Replaces John Deere OEM number AR69831< li>
  • 1" x 8 Left Hand Thread< li> < UL> (Part No: 170306)
$88.20
Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Part No: 121851)		$8.06
Front Drawbar Pin - Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Part No: 115536)		$33.00
Front Drawbar Support - Add $10 additional shipping due to weight. For tractor models 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7420, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7800, 7810. (Part No: 128292)$126.00
Front Drawbar Support - If you are replacing this part, you will also need replace the bushings: R31438 x 1, R40557 x 1, R40558 x 1, R71476 x 2. These are each sold individually. This front drawbar support is original equipment on John Deere 4240 and 4440 tractors. (Part No: 170514)		$1544.70
Front Drawbar Support - When replacing this part, you will likely need the following bushings: R31438 x 1, R40557 x 1, R40558 x 1, R71476 x 2. They are each sold individually. This Front Drawbar Support is used on John Deere models: 4020 serial number 201000 and up, 4040, 4230, 4320, 4430 (Part No: 121449)		$1050.00
Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Part No: 114095)		$7.16
Front Drawbar Support Pin -
  • For John Deere tractor models 8100 (s n 010000-later), 8100T, 8110, 8110T, 8120, 8120T, 8200 (s n 010000-later), 8200T, 8210, 8210T, 8220, 8220T, 8300 (s n 010000-later), 8300T, 8310, 8310T, 8320, 8320T, 8400 (s n 010000-later), 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number R130982< li> < UL> (Part No: 114549)
$33.10
Front Pull Arm - Left Hand - Telescoping Style For 2350, 2355, 2550, 2555, 2750, 2755, 2855 (Part No: 111977)$295.00
Front Pull Arm, Left Hand - Left Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Part No: 160666)		$326.00
Front Pull Arm, LH - Left Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Part No: 110985)		$239.00
Front Pull Arm Pin -
  • For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020< li>
  • Replaces John Deere OEM number R26609< li> < UL> (Part No: 114090)
$12.00
Front Pull Arm, RH - Telescoping Style. For tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2855. (Part No: 111976)$295.00
Front Pull Arm, RH - Right Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Part No: 110986)		$275.00
Front Pull Arm, Right Hand - Right Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640. (Part No: 128486)		$325.00
Front Pull Arm Washer -
  • For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520< li>
  • Replaces John Deere OEM number R26608< li> < UL> (Part No: 121442)
$13.90
HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3 16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5 32 inch, length 2 15 16 inches), four(4) of HP-5 (wire diameter 1 8 inch, length 2 9 16 inches), and three(3) of HP-6 (wire diameter 3 32 inch, length 1 5 8 inches). (Part No: 182461)		$10.86
Hammerstrap Pin Retainer - For tractor models 4520, 4555, 4560, 4620, 4630, 4650, 4755, 4760, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8630. (Part No: 128176)		$28.09
Handle -
  • For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 8100, 8100T, 8200, 8200T, 8300, 8300T, 8400, 8400T, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number R64084< li> < UL> (Part No: 170291)
$11.32
Handle -
  • For John Deere tractor models 3040 (s n 430000-later), 3140 (s n 430000-later), 3640, 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455< li>
  • Replaces John Deere OEM number R66297< li> < UL> (Part No: 170295)
$14.50
Handle, Center Link -
  • For John Deere tractor models 7720, 7820, 7920, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8230T, 8300, 8310, 8320, 8330, 8330T, 8400, 8410, 8420, 8430, 8430T, 8520, 8530< li>
  • Replaces John Deere OEM number R200878< li> < UL> (Part No: 170286)
$23.30
Hitch Ball 10000LB 2-5/16 - 2-5 16 inch ball size, 1-1 4 inch stud thread, 2-1 2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: 178287)		$29.50
Hitch Ball 15000LB 2-5/16 - 2-5 16 inch ball size, 1-3 8 inch stud thread, 2-5 8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: 178289)		$16.00
Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3 4 inch stud thread, 1-7 8 inch stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: 157028)		$9.80
Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1 8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: 157024)		$8.80
Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5 16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: 157017)		$12.26
Hitch Stbilizer, Center Link -
  • For John Deere tractor models 8235R (s n 016001-090000), 8245R (s n 016001-090000), 8260R (s n 016001-090000), 8270R (s n 016001-090000), 8285R (s n 016001-090000), 8295R (s n 016001-090000), 8310R (s n 016001-090000), 8320R (s n 000101-053099), 8335R (s n 016001-090000), 8345R (s n 000101-053099), 8360R (s n 016001-090000)< li>
  • Replaces John Deere OEM number RE559338< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 168393)
$385.00
Housing Assembly - 15 Long - Adjustable Consists of: R3104, R3106, R3110, R3111, R3112, R3119, & R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Part No: 109393)$140.00
Housing Assembly - 17.50 Long - Adjustable Consists of: R3104, R3105, R3110, R3111, R3112, R3119, & R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Part No: 111632)$140.00
Hydraulic Rockshaft Lift Arm, Left Hand -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7800, 7810 (s n 089999-earlier)< li>
  • Replaces John Deere OEM number R117818< li>
  • Fits Left Hand Side< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169006)
$207.00
Hydraulic Rockshaft Lift Arm, Right Hand -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7800, 7810 (s n 089999-earlier)< li>
  • Replaces John Deere OEM number R117819< li>
  • Fits Right Hand Side< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169007)
$207.00
Left Hand Lift Link -
  • For John Deere tractor models 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5076E, 5076EL, 5082E, 5083E, 5085E, 5090E, 5090EH, 5090EL, 5093E, 5100E, 5101E, 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5415, 5415H, 5420, 5425, 5425H, 5425HC, 5500, 5510, 5520, 5525, 5603, 5615, 5625, 5625HC, 5715, 5715HC, 5725, 5725H, 5725HC< li>
  • Replaces John Deere OEM number RE244697, RE243214, RE178489, RE54986< li> < UL> (Part No: 185716)
$133.00
Leveling Arm Pin - Used for attaching the leveling arms to the upper lift arms, this Pin is used on John Deere models 820, 830, 840, 920, 930, 940, 1020, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840 serial number 429999 and below, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3350. (Part No: 121437)		$17.26
Leveling Arm Screw - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Leveling Arm Screw is 17.50 inches long. Replaces T25835 (Part No: 165768)		$19.20
Leveling Arm Screw - Measuring 15.187 inches over all length, this Leveling Arm Screw is used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces T24908 (Part No: 110317)		$21.00
Leveling Assembly Housing - Used with telescoping 3pt pull arms, the rod on this Housing Assembly is 15.00 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-15, L2837415 (Part No: 109393)		$140.00
Leveling Assembly Housing - Used with non-telescoping 3pt pull arms, the rod on this Housing Assembly is 17.50 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-17, L2837417 (Part No: 111632)		$140.00
Leveling Box -
  • For John Deere tractor models 6110, 6110L, 6210, 6210L, 6310, 6310L, 6410, 6410L, 6510L< li>
  • Replaces John Deere OEM number AL159543< li>
  • 13 16" Pin holes in both ends< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155746)
$255.00
Leveling Box -
  • For John Deere tractor models 6800, 6810, 6900, 7700, 7800< li>
  • Replaces John Deere OEM number R106414, RE55238, R117616, R117872< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156269)
$146.00
Leveling Box -
  • For John Deere tractor models 6140J, 6145J, 6150M, 6155J, 6830, 6930, 7425, 7505, 7515, 7525< li>
  • Replaces John Deere OEM number AL221507< li> < UL> (Part No: 161669)
$300.00
Leveling Box Assembly, Right - This complete assembly is used on the right side for John Deere 850 below serial number 016000, 950 below serial number 020000, 1050 below serial number 011000. Replaces CH12778 (Part No: 157293)		$262.10
Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Part No: 118291)		$12.00
Leveling Box - Heavy Duty -
  • For John Deere tractor models 6110, 6110L, 6210, 6210L, 6310, 6310L, 6410, 6410L, 6510L< li>
  • Replaces John Deere OEM number AL159543< li>
  • 1" Pin holes in both ends< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155747)
$173.00
leveling crank handle - For tractor models 320, 40, 330, 420, 430. (Part No: 125724)$35.99
Leveling Link Adjusting Shaft - Used on John Deere 2010, 2510, 3010, 3020, 4010, 4020, 600, this part replaces John Deere part number T13859 (Part No: 111630)		$49.24
Leveling Screw -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730 (Except Hi-Crop)< li>
  • Replaces John Deere OEM number AF2707R, AF2706R< li> < UL> (Part No: 126540)
$59.99
Leveling Screw - This Right Hand Leveling Screw measures 19.44 inches in length, 1.125 inches diameter and 7 UNC right hand threads. For 520, 530, 620, 630, 720, 730 All Models Except Hi-Crop (Part No: AF2706R)$104.66
Leveling Screw - Left Hand For 520, 530, 620, 630, 720, 730 All Models Except Hi-Crop (Part No: R2018)$57.13
Leveling Screw Yoke - For tractor models 520, 530, 620, 630, 720, 730 all NON high crop models. (Part No: 126541)$179.00
Lift Arm -
  • For John Deere tractor models 8130, 8225R (s n 000101-053099), 8230, 8235R (s n 016001-090000), 8245R (s n 000101-053099), 8245R (s n 090001-later), 8260R (s n 016001-090000), 8270R (s n 000101-053099), 8270R (s n 090001-later), 8285R (s n 016001-090000), 8295R (s n 000101-053099), 8295R (s n 090001-later), 8295RT (s n 900101-907100), 8310R (s n 016001-090000), 8310RT (s n 902501-912000), 8320R (s n 000101-053099), 8320RT (s n 090001-later), 8320RT (s n 900101-907100), 8330, 8335R (s n 016001-090000), 8335RT (s n 090001-later), 8335RT (s n 902501-912000), 8345R (s n 000101-053099), 8345R (s n 090001-later), 8345RT (s n 090001-later), 8345RT (s n 900101-907100), 8360R (s n 016001-090000), 8360RT (s n 902501-912000), 8370R (s n 090001-later), 8370RT (s n 090001-later), 8430, 8530< li>
  • Replaces John Deere OEM number R163176, R179372, R280371, RE138771, R19890< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160512)
$210.00
Lift Arm Adjusting Handle - Used on John Deere 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. This part replaces T13858 (Part No: 110130)		$17.74
Lift Arm - Left Hand -
  • For John Deere tractor models 6110 (s n 291143-later), 6110L (s n 291143-later), 6120 (s n 402759-earlier), 6120L (s n 402759-earlier), 6210 (s n 291143-later), 6210L (s n 291143-later), 6215 (s n 402759-earlier), 6220 (s n 402759-earlier), 6220L (s n 402759-earlier), 6310 (s n 291143-later), 6310L (s n 291143-later), 6310S (s n 291143-later), 6320 (s n 402759-earlier), 6320L (s n 402759-earlier), 6405 (s n 291143-later), 6410 (s n 291143-later), 6410L (s n 291143-later), 6410S (s n 291143-later), 6415, 6420 (s n 402759-earlier), 6420L (s n 402759-earlier), 6510L (s n 291143-later), 6510S (s n 291143-later), 6520L (s n 402759-earlier), 6605 (s n 291143-later), 6615 (s n 402759-earlier), 6715 (s n 402759-earlier), 7220< li>
  • Replaces John Deere OEM number L116615< li>
  • Category II< li>
  • Fits Left Hand Side< li>
  • Splines: 12< li>
  • For Right Hand Side use Item #: 169537< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169523)
$86.00
Lift Arm - Left Hand -
  • For John Deere tractor models 6410 (s n 291308-later), 6410L (s n 291308-later), 6510L (s n 291308-later), 7220, 7320< li>
  • Replaces John Deere OEM number L116617< li>
  • Category III< li>
  • Fits Left Hand Side< li>
  • Splines: 12< li>
  • For Right Hand Side use Item #: 169544< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169543)
$83.00
Lift Arm - LH -
  • For John Deere tractor models SE6320, SE6420, SE6520, SE6620, 6020, 6120, 6220, 6320, 6420, 6420S, 6520, 6620< li>
  • Replaces John Deere OEM number L157537< li>
  • Fits Left Hand Side< li>
  • For right hand use Item #: 169592< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169563)
$168.00
Lift Arm Pin - This Lift Arm pin is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It replaces original part number AR55695, T22714 (Part No: 162626)		$13.00
Lift Arm - RH -
  • For John Deere tractor models SE6320, SE6420, SE6520, SE6620, 6020, 6120, 6220, 6320, 6420, 6420S, 6520, 6620< li>
  • Replaces John Deere OEM number L157538< li>
  • Fits Right Hand Side< li>
  • For left hand use Item #: 169563< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169592)
$168.00
Lift Arm - Right Hand -
  • For John Deere tractor models 6110 (s n 291143-later), 6110L (s n 291143-later), 6120 (s n 402759-earlier), 6120L (s n 402759-earlier), 6210 (s n 291143-later), 6210L (s n 291143-later), 6215 (s n 402759-earlier), 6220 (s n 402759-earlier), 6220L (s n 402759-earlier), 6310 (s n 291143-later), 6310L (s n 291143-later), 6310S (s n 291143-later), 6320 (s n 402759-earlier), 6320L (s n 402759-earlier), 6405 (s n 291143-later), 6410 (s n 291143-later), 6410L (s n 291143-later), 6410S (s n 291143-later), 6415, 6420 (s n 402759-earlier), 6420L (s n 402759-earlier), 6510L (s n 291143-later), 6510S (s n 291143-later), 6520L (s n 402759-earlier), 6605 (s n 291143-later), 6615 (s n 402759-earlier), 6715 (s n 402759-earlier), 7220< li>
  • Replaces John Deere OEM number L116616< li>
  • Category II< li>
  • Fits Right Hand Side< li>
  • Splines: 12< li>
  • For Left Hand Side use Item #: 169523< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169537)
$86.00
Lift Arm - Right Hand -
  • For John Deere tractor models 6410 (s n 291308-later), 6410L (s n 291308-later), 6510L (s n 291308-later), 7220, 7320< li>
  • Replaces John Deere OEM number L116618< li>
  • Category III< li>
  • Fits Right Hand Side< li>
  • Splines: 12< li>
  • For Left Hand Side use Item #: 169543< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169544)
$83.00
Lift Link -
  • For John Deere tractor models 6140J, 6150M, 6155J, 7505< li>
  • Replaces John Deere OEM number AL200843< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 163092)
$217.00
Lift Link -
  • For John Deere tractor models 6170R, 6175R, 6190R, 6195R, 6210R, 6215R< li>
  • Replaces John Deere OEM number AL201574< li> < UL> (Part No: 169976)
$147.00
Lift Link, Adjustable - Works on either RH or LH side. For tractor models 3010, 3020, 4010, (4020 SN# up to 200999). (Part No: 110250)		$490.00
Lift Link Assembly -
  • For John Deere tractor models 6170R, 6175M, 6175R, 6190R, 6195M, 6195R, 6210R, 6215R< li>
  • Replaces John Deere OEM number AL218721< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 168550)
$325.00
Lift Link Assembly -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5095M, 5095MH, 5100M, 5100MH, 5100ML, 5105M, 5105ML, 5115M, 5115ML< li>
  • Replaces John Deere OEM number RE245479< li> < UL> (Part No: 172257)
$167.90
Lift Link Assembly, Complete - For tractor models 1010, 320, 330, 40, 420, 430. Complete lift link assembly, adjustable Type (2 point, 3 point link). (Part No: 168895)		$153.00
Lift Link Assembly, complete (non adjustable) - For tractor models 40, 320, 330, 430, 1010. Complete Lift Link Assembly, Non-Adjustable Type. (Part No: 121306)		$67.00
Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 17.50" (hole-to-hole) lift link rod. Fits 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: 156785)		$62.00
Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable (while in use). Min Max Length: 21-1 2 inches - 28 inches. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. Replaces AR44554, T25836, R48595, T21901 (Part No: 121432)		$79.40
Lift Link Assembly - LH -
  • For John Deere tractor models 6R 215 (EU), 6175M (EU), 6175R (EU), 6195M (EU), 6195R (EU), 6210M, 6215R (EU)< li>
  • Replaces John Deere OEM number AL228335, AL167671, L156498, L100462< li>
  • Fits left hand side< li>
  • I.D.: 28.5mm (1.122")< li>
  • Includes: Structural tube, Lift link end, Nut< li>
  • For right hand use Item #: 140430< li> < UL> (Part No: 140429)
$175.00
Lift Link Assembly - RH -
  • For John Deere tractor models 6R 215 (EU), 6175M (EU), 6175R (EU), 6195M (EU), 6195R (EU), 6210M, 6215R (EU)< li>
  • Replaces John Deere OEM number AL228335, AL167672, L156498, L100462< li>
  • Fits Right hand Side< li>
  • I.D.: 28.5mm (1.122")< li>
  • Includes: Structural tube, Lift link end, Nut< li>
  • For left hand use Item #: 140429< li> < UL> (Part No: 140430)
$175.00
Lift Link Assembly, Right Hand - Right Hand. 15 inch rod length. Closed length 21-1 4" Extended length 27-1 2" For tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. R48595, RE16370, T24908 (Part No: 108552)		$140.72
Lift Link Assembly, Right Hand - Right Hand. 17.5" rod length Closed Length: 23" Extended Length: 29-1 2". Housing Assembly. For: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. There is an additional shipping cost for this product: $15.00 (Part No: 150871)		$135.00
Lift Link Ball - Used on John Deere models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1950, 2020, 2030, 2040, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3255, 400, 401, 401B, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T22399 (Part No: 170398)		$44.76
Lift Link Handle -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730 (except Hi-Crop)< li>
  • Replaces AF2676R [handle] and 16H1419 [rivet pin]< li> < UL> (Part No: 110286)
$17.95
Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Part No: 176718)		$18.90
Lift Link Knuckle - Used on John Deere Tractor 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. Replaces AR26691, Marked R26612 (Part No: 121856)		$57.00
Lift Link, Right Hand - This Right Hand Lift Link is used on 110 Compact Loader Backhoe, 4120 Compact Tractor, 4320 Compact Tractor, 4500 Compact Tractor, 4510 Compact Tractor, 4520 Compact Tractor, 4600 Compact Tractor, 4610 Compact Tractor, 4700 Compact Tractor, 4710 Compact Tractor, 4720 Compact Tractor, 5045E, 5050E, 5055E, 5058E, 5065E, 5067E, 5075E, 5076E, 5076EL, 5082E, 5083E, 5090E, 5090EH, 5090EL, 5093E, 5101E, 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5415, 5415H, 5420, 5425, 5500, 5503, 5510, 5520, 5525, 5603, 5615, 5715, 5715HC. Note use on some models require rear rims larger than 24 inches. Replaces RE243216, RE247409, RE45632 (Part No: 160491)		$141.00
Lift Link Rod - Rod is 25 5 8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Part No: 110577)		$63.70
Lift Link Rod - For tractor models 3010, 3020, 4010, (4020 up To S#200999). (Part No: 110577)$63.70
Lift Link Rod - Used on the non-adjustable lift arm, this Lift Link Rod measures 19.125 inches overall. It includes T21901 Lift Rod Ball. (Part No: 110530)		$68.00
Lift Link Rod - For John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lift Link Rod, comes with T21901 Lift Rod Ball. The overall length is 21.750 inches long. (Part No: 108389)		$54.07
Lift Link Rod -
  • For John Deere tractor models 2510, 3020, 4020< li>
  • Replaces John Deere OEM number R34476< li>
  • Length: 38 5 16"< li> < UL> (Part No: 176688)
$117.00
Lift Link Seal -
  • For John Deere tractor models 2510, 3010, 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number AR26616< li>
  • Inside Diameter; 1"< li>
  • Outside Diameter: 1.503"< li> < UL> (Part No: 110138)
$6.66
Link Body -
  • For John Deere tractor models 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520< li>
  • Replaces John Deere OEM number R154440< li> < UL> (Part No: 170283)
$125.00
Link Body -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4455< li>
  • Replaces John Deere OEM number RE49601, R51896< li> < UL> (Part No: 170311)
$73.30
Link End, Cat 3 - Left Hand -
  • For John Deere tractor models 7720, 7820, 7920, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8230T, 8300, 8310, 8320, 8330, 8330T, 8400, 8410, 8420, 8430, 8430T, 8520, 8530< li>
  • Replaces John Deere OEM number RE171278, RE154432< li>
  • M42 x 4.5 LH Thread< li> < UL> (Part No: 165155)
$154.00
Load Control Shaft - Shaft is 20.937 inches long and 1 inch diameter. For tractor models 500, 2510, 2520, 3010, 3020, 4030. (Part No: 128555)$85.60
Load Control Shaft - This Load Control Shaft measures 19.69 inches long and .815 Diameter. Also replaces T26598. 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1650, 1750, 1850, 2040, 2150, 2155 serial number 651779 and earlier, 2240, 2255, 2355, 300, 300B, 301, 301A, 302, 302A Replaces John Deere OEM nos L26932, T26598 (Part No: 122137)		$51.20
Load Control Shaft Bushing - Bushing with O-Ring. For tractor models 500, 2510, 2520, 3010, 3020, 4030. Also available in oversizes .003, .006 and .030. State size required in comments section of order form if oversize is required. 2 required per tractor. (Part No: 113995)$15.10
Load Control Shaft Seal - 2 Seals required per tractor. For tractor models 500, 2510, 2520, 3010, 3020, 4030 (Part No: 115050)		$5.46
Load Sensing Bushing -
  • For John Deere tractor models 1350, 1550, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2141, 2155, 2250, 2251, 2251N, 2350, 2351, 2355, 2355N, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3141, 3150, 3255, 3340, 3350, 3351, 3641, 3651< li>
  • Replaces John Deere OEM number L41788< li> < UL> (Part No: 129288)
$12.00
Lower Drawbar Support Plate -
  • For John Deere tractor models 4055 (with Regular Drawbar), 4250 (with Cat 3 Narrow), 4255 (with Regular or Cat 3 Narrow Drawbar), 4440 (with Regular Drawbar), 4450 (with Cat 3 Narrow), 4455 (with Cat 3 Narrow)< li>
  • Replaces John Deere OEM number R64751< li>
  • Thickness: 3 4"< li>
  • Width: 3"< li>
  • Length: 15-3 4"< li> < UL> (Part No: 110117)
$58.00
Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Part No: 121852)		$8.90
Lower Lift Arm - 3 Point, without Repair End - Left Hand -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AF2715R, AF2716R< li>
  • Left hand side< li>
  • Does not include Repair End< li>
  • For Right Hand Lower Lift Arm use Item #: 171092< li> < UL> (Part No: 171093)
$199.00
Lower Lift Arm - 3 Point, without Repair End - RH -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AF2714R, AF2716R< li>
  • Right hand side< li>
  • Does not include Repair End< li>
  • For LH Lower Lift Arm use Item #: 171093< li> < UL> (Part No: 171092)
$195.00
Lower Lift Arm - 3 Point with Repair End, Left Hand -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AF2715R, AF2716R< li>
  • Left hand Side< li>
  • Includes Repair End< li>
  • For Right Hand Lower Lift Arm use Item #: 125688< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 125687)
$365.00
Lower Lift Arm - 3 Point with Repair End, Right Hand -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AF2714R, AF2716R< li>
  • Right hand Side< li>
  • Includes Repair End< li>
  • For Left Hand Front Pull Arm use Item #: 125687< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 125688)
$365.00
Lower Lift Arm Ball - Measuring 3 4 inch inside diameter, 1 3 16 inch outside diameter, and 1 3 8 inch wide. This part replaces John Deere part number T21901. Used on John Deere 1020, 1530, 2020, 2030, 2040, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2855N, 2940, 2950, 3030, 3055, 3150, 3155, 820, 830 (Part No: 112054)		$9.00
Lower Lift Link Housing Yoke -
  • For John Deere tractor models 2510, 3010, 3020 (Early), 4010, 4020 (Early)< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number R26615< li> < UL> (Part No: 110512)
$97.00
Lower Lift Link Pin -
  • For John Deere tractor models 655, 755, 756, 855, 856, 955, 3033R, 3038R, 3039R, 3045R, 3046R, 3120, 3203, 3320, 3520, 3720, 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M, 4066R, 4105, 4120, 4320, 4500, 4510, 4520, 4600, 4610, 4700, 4710, 4720, 5045D, 5045E, 5050E, 5055E, 5065E, 5075E, 5076E, 5076EL, 5078E, 5082E, 5083E, 5085E, 5090E, 5090EH, 5090EL, 5093E, 5100E, 5101E, 5103, 5103E, 5103S, 5104, 5105, 5200, 5203, 5204, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5415, 5415H, 5420, 5425, 5500, 5503, 5510, 5520, 5525, 5600, 5603, 5605, 5610, 5615, 5625, 5700, 5705, 5715, 5715HC, 5725< li>
  • Replaces John Deere OEM number R120540< li>
  • Diameter: .630"< li>
  • Hole Diameter: .325"< li>
  • Length: 2.913" (To Head)< li> < UL> (Part No: 161829)
$7.30
Lower Lift Link Pin -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s n 6719-earlier), 4230 (s n 13087-earlier), 4320, 4430 (s n 17613-earlier), 4455< li>
  • Replaces John Deere OEM number R54170, R26618< li> < UL> (Part No: 164340)
$5.70
Lower Lift Yoke - Used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lower Lift Casting replaces John Deere part number R48595 (Part No: 111346)		$40.00
Lower Lift Yoke Plate -
  • For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2941< li>
  • Replaces John Deere OEM number T21759< li> < UL> (Part No: 164883)
$5.60
Lower Link Adapter Nut - Used on telescoping lower lift arms, this is a 1-5 8 inch adapter nut. It replaces John Deere part number T21758 (Part No: 173022)		$9.50
Needle Bearing -
  • For John Deere tractor models 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 6620, 7720, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9501, 9510, 9510 SH, 9550, 9550 SH, 9560, 9560 SH, 9600, 9610, 9650, 9650 CTS, 9660, 9660 CTS< li>
  • Replaces John Deere OEM number R84261< li> < UL> (Part No: 167509)
$0.60
Pin, Drawbar, Front -
  • For John Deere tractor models 2510 (Row Crop), 2520 (Row Crop), 3010 (Row Crop, Standard, Row Crop Utility, Orchard)< li>
  • Replaces John Deere OEM number AR38256< li>
  • For Regular Drawbar, Not Swinging< li>
  • Diameter Hole: .75"< li> < UL> (Part No: 170305)
$24.50
Pin, Front Pull Arm -
  • For John Deere tractor models 4000 (s n 201000-later), 4020 (s n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455 (Mexico)< li>
  • Compatible with John Deere Harvester(s) 740, 9940, 9950< li>
  • Replaces John Deere OEM number R53558< li> < UL> (Part No: 170292)
$20.76
Pin, Pull Arm -
  • For John Deere tractor models 4250 (Rear), 4255 (Rear), 4440 (Rear), 4450 (Rear), 4555 (Rear)< li>
  • Replaces John Deere OEM number AR70865< li> < UL> (Part No: 170307)
$39.61
Pull Arm End - Left Hand -
  • For John Deere tractor models 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430< li>
  • Replaces John Deere OEM number RE44094, AR26554< li>
  • Replaces John Deere Casting number R106781, R26907< li>
  • Casting No. R26907, R106781< li>
  • Left Hand< li>
  • Category 2< li> < UL> (Part No: 112556)
$145.90
Pull Arm End - Right Hand -
  • For John Deere tractor models 2840, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430< li>
  • Replaces John Deere OEM number AR26555, RE44093< li>
  • Replaces John Deere Casting number R106780, R26911< li>
  • Casting No. R26911, R106780< li>
  • Right Hand< li>
  • Category 2< li> < UL> (Part No: 112557)
$139.40
Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Part No: 111387)		$296.00
Pull Arm Latch - For tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Part No: 108518)		$46.30
Pull Arm Link End -
  • For John Deere tractor models 940, 1040, 1140, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855< li>
  • Replaces John Deere OEM number AL24137< li> < UL> (Part No: 176345)
$181.70
Pull Arm - Lower, Category 1 -
  • For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 1020, 2040 (s n 349999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 401B, 401C< li>
  • Replaces John Deere OEM number AT56648, AT19857, AT28057< li> < UL> (Part No: 164744)
$280.00
Pull Arm, Rear - Right Hand/Left Hand -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AF2716R< li>
  • Fits left or right hand side< li> < UL> (Part No: 160665)
$85.00
Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8 inch mounting pins and adapter bushings, 27-1 4 inches width, 3-1 2 inch x 3-1 2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. This additional charge will be added to your order. (Part No: 180731)		$325.00
Rear Draft Link Lock - Used on John Deere 2955, 3055, 3150, 3255, 3650, 4040, 4240, 4250, 4255, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7500, 7505, 7510, 7520, 7530, 7600, 7610, 7700, 7710, 7800, 7810. This part replaces OEM numbers AR74179, AR90084, RE11578 (Part No: 153450)		$47.76
Rear Drawbar Support -
  • For John Deere tractor models 6800, 6900, 7200, 7210, 7400, 7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number L76091< li> < UL> (Part No: 153784)
$79.80
Rear Drawbar Support -
  • For John Deere tractor models 840, 940, 1040, 1140, 1350, 1640, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N< li>
  • Replaces John Deere OEM number T21677, T31725< li> < UL> (Part No: 155463)
$64.10
Rear Drawbar Support Pin -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455< li>
  • Replaces John Deere OEM number R65530< li>
  • Used to Stabilize Swinging Drawbar< li> < UL> (Part No: 171607)
$9.72
Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 & 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Part No: 108900)		$163.80
Retainer, Lower Lift Link Pin -
  • For John Deere tractor models 4120 (Compact Utility), 4320 (Compact Utility), 4500 (Compact Utility), 4510 (Compact Utility), 4520 (Compact Utility), 4600 (Compact Utility), 4610 (Compact Utility), 4700 (Compact Utility), 4710 (Compact Utility), 4720 (Compact Utility), 5105, 5200, 5205, 5210, 5220, 5225, 5300, 5310, 5320, 5325, 5400, 5403, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5605, 5615 (Turkey), 5705, 5715 (Turkey)< li>
  • Replaces John Deere OEM number R105230< li> < UL> (Part No: 170045)
$5.70
Rockshaft -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7800, 7810 (s n 089999-earlier)< li>
  • Replaces John Deere OEM number R117816< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 169008)
$260.00
Rockshaft Arm Bushing -
  • For John Deere tractor models 2010 (s n 29001-later), 2510, 3010, 3020, 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 600< li>
  • Replaces John Deere OEM number R26619< li> < UL> (Part No: 168631)
$5.66
Rockshaft Arm - Left Hand -
  • For John Deere tractor models SE6510 (s n 291307-early), SE6610 (s n 291307-early), 6110 (s n 291307-early), 6110L (s n 291307-early), 6210 (s n 291307-early), 6210L (s n 291307-early), 6300, 6310 (s n 291307-early), 6310L (s n 291307-early), 6400, 6410 (s n 291307-early), 6410L (s n 291307-early), 6506, 6510 (s n 291307-early), 6510L (s n 291307-early), 6600, 6610 (s n 291307-early)< li>
  • Replaces John Deere OEM number L114583< li>
  • Left Side< li>
  • For Rockshaft use Item #: 156284< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156283)
$155.00
Rockshaft Arm - RH -
  • For John Deere tractor models SE6510 (s n 291307-early), SE6610 (s n 291307-early), 6110 (s n 291307-early), 6110L (s n 291307-early), 6210 (s n 291307-early), 6210L (s n 291307-early), 6300, 6310 (s n 291307-early), 6310L (s n 291307-early), 6400, 6410 (s n 291307-early), 6410L (s n 291307-early), 6506, 6510 (s n 291307-early), 6600, 6610 (s n 291307-early)< li>
  • Replaces John Deere OEM number L114584< li>
  • Right Side< li>
  • For Left Arm use Item #: 160038< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156284)
$155.00
Rockshaft Control Cable - For tractor models 2510, 3010 and early 3020 before SN# 122999. (Part No: 114691)		$78.95
Rockshaft Control Cable -
  • For John Deere tractor models 4010, 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number AR26712, R31422< li>
  • Overall Length: 57"< li>
  • Mount to Mount:42 1 4"< li> < UL> (Part No: 114692)
$79.50
Rockshaft Cover Shield - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: 154194)		$25.99
Rockshaft Cylinder Seal Kit, AL33017 -
  • For John Deere tractor models 1640, 2040, 2040S, 2130 (s n 257706-later), 2140, 2141, 2250, 2355, 2450, 2541, 2555, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N, 5083, 5083E, 5083EN, 5085E, 5085M, 5093, 5093E, 5093EN, 5101, 5101E, 5101EN, 5200 (Early), 5210 (Early), 5220, 5225, 5300 (Early), 5310 (Early), 5310N, 5320, 5320N, 5325, 5325N, 5400 (Early), 5400N, 5403, 5410 (Early), 5415, 5415H, 5420, 5420N, 5425, 5425N, 5500 (Early), 5500N, 5510 (Early), 5510N, 5520, 5520N, 5525, 5525N, 5600, 5603, 5605, 5615, 5625, 5700, 5705, 5715, 5715HC, 5725< li>
  • Replaces John Deere OEM number AL33017, L34374, L34375< li> < UL> (Part No: 151992)
$26.39
Rockshaft Lift Arm - LH -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6510L, 6510S, 6605< li>
  • Replaces John Deere OEM number L114581< li>
  • Left Hand< li>
  • For Rockshaft use Item #: 156282< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156281)
$155.00
Rockshaft LIft Arm - RH -
  • For John Deere tractor models 6110 (s n 291142-earlier), 6110L (s n 291142-earlier), 6200 (s n 187952-later), 6200L (s n 187952-later), 6210 (s n 291142-earlier), 6210L (s n 291142-earlier), 6300 (s n 187952-later), 6300L (s n 187952-later), 6310 (s n 291142-earlier), 6310L (s n 291142-earlier), 6310S (s n 291142-earlier), 6400 (s n 187952-later), 6400L (s n 187952-later), 6405 (s n 291142-earlier), 6410 (s n 291142-earlier), 6410L (s n 291142-earlier), 6410S (s n 291142-earlier), 6500 (s n 187952-later), 6500L (s n 187952-later), 6510L (s n 291142-earlier), 6510S (s n 291142-earlier), 6605 (s n 291142-earlier)< li>
  • Replaces John Deere OEM number L114582< li>
  • Right Hand< li>
  • Splines: 31< li>
  • For Rockshaft use Item #: 156281< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156282)
$155.00
Rockshaft Return Link - For tractor models 620, 630 both row crops. (Part No: 109433)		$30.26
Rockshaft Return Spring - For tractor models 520, 530, 620, 630, 720, 730. (Part No: 109647)$62.00
Spring Clamp -
  • For John Deere tractor models 830 (3 cyl.), 840, 930, 940, 1020 (s n 183987-later), 1030, 1035, 1040, 1120 (s n 183987-later), 1130, 1140, 1350, 1530, 1550, 1630, 1635, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020 (s n 039087-later), 2030, 2035, 2040, 2040S, 2120 (s n 039087-later), 2130, 2135, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3135, 3140, 3150, 3155, 3350, 3640, 3650< li>
  • Compatible with John Deere Construction & industrial models 300B (s n 715671-later), 301A (s n 715671-later), 401B, 401D< li>
  • Replaces John Deere OEM number L26936< li> < UL> (Part No: 161830)
$1.00
Stabilizer Assembly - For tractor models 6405, 6110, 6110L, 6210, 6310, 6310L, 6410, 6410L, 6215, 6415, 6615, 6715, 6120, 6220, 6220L, 6420, 6420L, 6520L, 7420. Replaces DE18855, DE18856, DE18899. Minimum Maximum Length: 394mm (15.50 Inches) 450mm (17.75 Inches). Category I (Part No: 154529)		$102.00
Stabilizer Assembly -
  • For John Deere tractor models 6010, 6020, 6110, 6120, 6205, 6210, 6215, 6220, 6310, 6320, 6405, 6410, 6415, 6420, 6505, 6510, 6515, 6520, 6605, 6610, 6620, 6810, 6820, 6910, 6920< li>
  • Replaces John Deere OEM number 75858< li> < UL> (Part No: 125403)
$99.00
Stabilizer Link - Measuring 16 1 2 inches closed, and 29 inches open, this Stabilizer link is 5 8 inches on the clevis end and 3 4 inches on the swivel end. Replaces John Deere part numbers AL210904, AL225292. Used on John Deere models: 6010, 6020, 6100, 6105M, 6105R, 6105RC, 6110, 6110M, 6110R, 6115M, 6115MC, 6115R, 6115RC, 6120, 6120M, 6120R, 6125M, 6125R, 6130, 6130M, 6130R, 6135M, 6135R, 6140M, 6140R, 6145M, 6145R, 6150M, 6150R, 6155M, 6155R, 6170M, 6175M, 6175R, 6195M, 6195R, 6200, 6210, 6215R, 6220, 6230, 6230 Premium, 6300, 6330, 6330 Premium, 6400, 6430, 6430 Premium, 6510, 6520, 6530 Premium, 6610, 6620, 6630 Premium, 6810, 6820, 6830 Premium, 6910, 6910S, 6920, 6920S, 6930 Premium, 7130, 7230 (Part No: 169204)		$265.00
Straight Drawbar -
  • For John Deere tractor models 3032E, 3038E, 3120, 3203, 3320, 3520, 3720, 4105, 4200, 4210, 4300, 4310, 4400, 4410< li>
  • Replaces John Deere OEM number M123824< li>
  • Hole Size: .827" - Tractor End 1.024" Implement End< li>
  • Length: 27.559"< li>
  • Thickness: 1.000"< li>
  • Width: 2.000"< li> < UL> (Part No: 163553)
$98.00
Straight Drawbar -
  • For John Deere tractor models 4050, 4055, 4240, 4240S, 4250, 4255, 4350, 4440, 4450, 4455< li>
  • Replaces John Deere OEM number R61184SPL < li>
  • Length: 45.620"< li>
  • Width: 3.00"< li>
  • Thickness: 1.500"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 165077)
$275.00
Sway Bar - This Sway Bar is adjustable from 9 1 2 inches to 13 inches. It is used on John Deere 5103, 5105, 5200, 5203, 5205, 5210, 5300, 5303, 5310, 5400, 5403, 5410, 5415, 5500, 5510, 5605, 5615, 5705, 5715. Replaces RE45708 (Part No: 166320)		$23.26
Sway Block - Left Hand For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2450, 2555, 2630, 2640, 2750, 2755, 300B (Part No: 108953)		$41.00
Sway Block - Right Hand For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2450, 2555, 2630, 2640, 2750, 2755, 300B (Part No: 108949)$41.00
Sway Block - Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Part No: 108936)		$61.00
Sway Block - Left Hand For 3010 (Part No: 108932)$116.00
Sway Block - Right Hand For 3010 (Part No: 108931)$123.00
Sway Block - Left Hand For 4010 (Part No: 108904)$77.00
Sway Block - Right Hand For 4010 (Part No: 108903)$75.30
Sway Block - Left Hand For 4250 with Narrow Cat III, 4255 with Narrow Cat III, 4350, 4440, 4450, 4455. OEM# R104902 (Part No: 110811)$123.00
Sway Block - Right Hand For 4250 with Narrow Cat III, 4255 with Narrow Cat III, 4350, 4440, 4450, 4455. OEM# R104901 (Part No: 110812)$139.00
Sway Block - Left Hand For 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520 (Part No: 110476)$86.00
Sway Block - Right Hand For 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520 (Part No: 110475)$94.00
Sway Block Bracket, Left Hand - This Left Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20168 (Part No: 111974)		$37.26
Sway Block Bracket, LH - For tractor models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Part No: 111974)$37.26
Sway Block Bracket, RH - For tractor models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Part No: 111975)$40.00
Sway Block Bracket, Right Hand - This Right Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20167 (Part No: 111975)		$40.00
Sway Block Kit - Contains: 2 Sway Blocks, 4 Spacers, & Square Headed Hardware For 520, 530, 620, 630, 720, 730 (Part No: 178552)$111.55
Sway Block, LH - This Left Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. Replace R39513 (Part No: 108936)		$61.00
Sway Block, LH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Part No: 108953)		$41.00
Sway Block, LH - For tractor models 2010 SN# 42001 and up RC or utility. (Part No: 110560)		$102.00
Sway Block, LH - For model 4010. Replaces: R32324 (Part No: 108904)$77.00
Sway Block, LH - For tractor models 520, 530, 620, 630, 720, 730. (Part No: 108930)$42.50
Sway Block, RH - This Right Hand Sway Block is used on tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4455. It Replaces R39512 (Part No: 108937)		$56.00
Sway Block, RH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Part No: 108949)		$41.00
Sway Block, RH - For tractor models 2010 SN# 42001 and up RC or utility. (Part No: 110561)		$93.50
Sway Block, RH - For model 4010. Replaces: R32323 (Part No: 108903)$75.30
Sway Block, RH - For tractor models 520, 530, 620, 630, 720, 730. (Part No: 108916)$44.22
Sway Chain Assembly -
  • For John Deere tractor models A (With 800 Lift Kit), B (With 800 Lift Kit), G (With 800 Lift Kit), 50 (With 800 Lift Kit), 60 (With 800 Lift Kit), 70 (With 800 Lift Kit)< li>
  • Replaces John Deere OEM number 14779, 31606A, 31602A, 331603A, DA2632A, DA4560A, RV695A< li>
  • Includes 1 Chain, 1 Large Clevis w Drilled Pin and Cotter Pin, 1 Small Clevis w Drilled Pin and Cotter Pin < li>
  • 2 Used Per Tractor. < li> < UL> (Part No: 126736)
$71.00
Sway Chain/ Lift Link Bolt -
  • For John Deere tractor models 40, 320, 330, 420, 430, 435, 440, 1010< li>
  • Replaces John Deere OEM number M2084T< li> < UL> (Part No: 126735)
$24.50
Swinging Drawbar - For model B up to SN# 149699. (Part No: 179110)		$191.00
Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Part No: 109685)		$10.10
Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Part No: 170137)		$1.20
Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Part No: 109670)		$1.50
Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Part No: 109671)		$2.50
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Part No: 173019)		$0.76
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Part No: 170141)		$0.66
Top Link - Top Link, Category III. For tractor models 4630, 4640, 4650, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650. For 1530, 2020, 2030, 2240, 2440, 2630, 2640 (Part No: 102074)		$227.00
Top Link - Top link with knuckle with 7 8 hole and Category II quick release hook. 12 center body with clip. 1-1 4 threaded ends. Adjusts approximately 25 to 33.5. For 2510, 2520, 4030 (Part No: 102072)$166.00
Top Link - Complete Top Link, Cat I tractor end, Cat II implement end. Eylet size is 3 4 inch at Bracket end, 1 inch at working end. Color is JD green. 21 Inch minimum and 30 Inch maximum reach. For tractor models 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2650, 2850, 3020. Replaces AL39170, AL67290. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102057)		$54.00
Toplink Assembly -
  • For John Deere tractor models 3020 (using rear tires 18.4-38 20.8-34 23.1-30), 4000 (using rear tires 18.4-38 20.8-34 23.1-30), 4020 (using rear tires 18.4-38 20.8-34 23.1-30), 4040 (s n 002862-earlier), 4050 (s n 001000-later), 4230 (using rear tires 18.4-38 20.8-34 23.1-30), 4240 (s n 006627-earlier), 4250 (s n 006136-later), 4255, 4430, 4455< li>
  • Replaces John Deere OEM number AR34209, AR50643, AR61659, R51524, R42495< li>
  • Link Ends Have 1 3 8" Thread< li>
  • Front Link End Has 1" Pin Hole < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 102056)
$198.48
Toplink Assembly -
  • For John Deere tractor model 4440 (s n 013166-earlier)< li>
  • Replaces John Deere OEM number RE44562< li>
  • Kit includes center link end, center link body, center link handle< li> < UL> (Part No: 128474)
$250.00
Toplink Assembly -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6500, 6500L, 6510, 6510L, 6510S, 6520L, 6603, 6605, 6615, 6715, 7220, 7320< li>
  • Replaces John Deere OEM number AL159873, AL78064< li>
  • Adjustable 24"-33"< li>
  • II Both Ends (1" ID)< li> < UL> (Part No: 159543)
$196.00
Top Link Assembly - For tractor models (2250, 2450, 2650, 2850 with increased lift capacity), 3030, 3040, 3050, 3120, 3130, 3140, 3350. Top Link Assembly, with ball and with Cat II Quick Hitch Hook. (Part No: 164299)$235.00
Top Link Assembly -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR30830< li>
  • 1-1 4" x 7 Right Hand Thread< li>
  • Contains items to replace R47524, AR46298, AR26527< li> < UL> (Part No: 111266)
$213.00
Top Link Assembly -
  • For John Deere tractor models 2030, 2440 (s n 341000 - later), 2630, 2640 (s n 341000 - later)< li>
  • Compatible with John Deere Construction & industrial models 301A (s n 362025 - later), 302, 302A, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number AR92432< li> < UL> (Part No: 158208)
$159.90
Top Link Assembly - Cat 4 -
  • For John Deere tractor models 8130, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8310R, 8310RT, 8320R, 8320RT, 8330, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8370RT, 8430, 8530< li>
  • Replaces John Deere OEM number R210680, RE278964, RE280348< li> < UL> (Part No: 160577)
$150.00
Top Link Assembly, CAT III - Consisting of AL159964 Implement End Hook, AL159969 Tractor End, and Center Section and L56746 Handle, this Category III top link measures 20.866 inches compressed and 28.543 inches expanded to full length. It has M36 X 4 threads. Used on John Deere 6020, 6120, 6130, 6220, 6230, 6300, 6310, 6320, 6330, 6330 Premium, 6400, 6410, 6420, 6420S, 6430, 6430 Premium, 6506, 6510, 6520, 6530, 6530 Premium, 6600, 6610, 6620, 6630, 6630 Premium, 7220, 7230. Replaces AL176469, AL159867, AL78066, AL176533 (Part No: 161846)		$233.10
Top Link Assembly, Cat lll -
  • For John Deere tractor models 6150M, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920, 6920S, 6930, 7330, 7420, 7520< li>
  • Replaces John Deere OEM number AL176465, AL159863, AL80678< li>
  • Length: Minimum 23.110" Maximum 30.787"< li>
  • Thread Size: M36 X 4< li>
  • Category 3< li> < UL> (Part No: 162605)
$260.00
Top Link Ball, Category I - This is a Category I Ball for a 2 inch socket and 3 4 inch pin. It is used with AR34208 top link. Replaces F2680R (Part No: 121860)		$4.90
Top Link Ball, Category II - This is a Category II Ball for a 2 inch socket and 1 inch pin. It is used with AR34208 top link. Replaces F2681R (Part No: 111379)		$5.00
Top Link Body -
  • For John Deere tractor models 7210, 7410, 7420, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Replaces John Deere OEM number R96294< li> < UL> (Part No: 115526)
$78.55
Top Link Bracket - For tractor models 3010, 4010. (Part No: 110134)		$107.49
Top Link Bracket -
  • For John Deere tractor models 820, 830, 920, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number T21865< li> < UL> (Part No: 160341)
$40.26
Top Link Bracket - For Category I hitches on: 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855. (Part No: 121440)		$81.00
Top Link, Cat I - For tractor models 520, 530, 620, 630, 720, 730. Replaces AF2873R, AR21917R, AF2799R. (Part No: 102073)		$305.00
Top Link (Center Link) End -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020 (s n 250000-later), 4030, 4230< li>
  • Compatible with John Deere Construction & industrial models 500, 600< li>
  • Replaces John Deere OEM number AR32531< li>
  • Front (tractor side) center link end< li>
  • Length: 9.750"< li>
  • Thread: 1.125" - 7 LH UNC< li>
  • Pin Hole Diameter: .875"< li> < UL> (Part No: 121858)
$96.00
Top Link (Center Link) Pivot Pin -
  • For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 600< li>
  • Replaces John Deere OEM number AR67880< li>
  • Length: 4.803"< li>
  • Diameter: .875"< li> < UL> (Part No: 121859)
$19.26
Top Link Chain -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number F2825R, F2827R, F2849R < li> < UL> (Part No: 156783)
$14.50
Top Link - Complete Center Link Assembly -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5310S, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5415, 5415H, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5503, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5610, 5615, 5625, 5715, 5725< li>
  • Replaces John Deere OEM number RE243206, RE45631< li>
  • Category: 2 2< li>
  • Adjustable Length: 19.882" - 27.559"< li>
  • Body Length: 11.575"< li>
  • Hole size: 1.000"< li> < UL> (Part No: 150367)
$111.00
Top Link End - Used on John Deere models: 500, 500A below serial number 123113, 600, 2510, 2520 Row Crop, 3010 below serial number 049999, 3020, 4000 serial number 201000 and up, 4010, 4020, 4030, 4230. 15.250 inches long with 1.250 inch Right Hand thread. Uses F2680R Cat I ball or F2681R Cat II ball, not included. Replaces AR46298, R26813. (Part No: 110204)		$102.00
Top Link End - Measuring 8.500 inches long, with 1.375 inch -8 Left Hand UNC Thread and a 1 inch hole diameter, this part replaces John Deere part numbers AR50643. It is used on John Deere models: 2941, 2951, 3141, 3351, 3641, 3651, 4000, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Verify measurements before ordering. Some of these models used more than one size. (Part No: 110318)		$98.60
Top Link End -
  • For John Deere tractor models 4455, 4560, 4630 (after SN 030391), 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8430 (after SN 004504), 8440, 8450, 8630 (after SN 006170), 8640, 8650< li>
  • Replaces John Deere OEM number RE44559< li>
  • Tractor End< li>
  • Catagory III< li>
  • RH Thread< li>
  • 1.264" Pin hole< li> < UL> (Part No: 110323)
$112.40
Top Link End -
  • For John Deere tractor models 7210, 7410, 7420, 7510, 7600, 7610, 7700, 7710, 7810< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Replaces John Deere OEM number RE56209< li>
  • Implement end< li>
  • Catagory 3< li> < UL> (Part No: 115528)
$123.00
Top Link End -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number AT19796< li>
  • Thread: 1.00"< li>
  • Length: 11.00"< li>
  • ID: 1" Ball Diameter< li> < UL> (Part No: 168194)
$92.00
Top Link Lock -
  • For John Deere tractor models 7210, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7500, 7800< li>
  • Replaces John Deere OEM number R96295< li> < UL> (Part No: 115527)
$28.50
Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Part No: 161847)		$22.76
Top Link Pin - Cat 1 -
  • For John Deere tractor models 940, 1040, 1140, 1640, 2040, 2040S, 2140, 2150, 2155, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N< li>
  • Replaces John Deere OEM number R58262< li>
  • Outside Diameter: .750"< li> < UL> (Part No: 163705)
$9.30
Top Link Pin - Quick Lock -
  • For John Deere tractor models 2010, 2520, 3010, 3020, 4010, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 7200, 7210, 7400, 7410, 7510< li>
  • Replaces John Deere OEM number RE56991, AR39784, AR67881< li>
  • Catagory II< li>
  • Quick Lock Top Link Pin< li> < UL> (Part No: 153787)
$25.26
Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Part No: 114007)		$5.00
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: 112156)		$30.26
Upper Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.283 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Part No: 114099)		$8.96
Upper Lift Arm - Use on both the right and left side, this lift arm is 11-1 2 inches, center to center on the holes. The splined side is 1-9 16 with 18 splines. The other side is 3 4 of an inch. (Part No: 124402)		$148.26
Upper Lift Arm Housing - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this part replaces John Deere part number L33535 (Part No: 173017)		$31.00
Upper Yoke -
  • For John Deere tractor models 520, 530, 620, 630, 720, 730 (Except Hi Crop)< li>
  • Replaces John Deere OEM number 12H303, 14H785, 19H1901, 34H331, 34H369, B2804R, DA5883A, F2671R, F2673R, F2674R, F2675R, JD7759< li> < UL> (Part No: 172726)
$60.90
Valve Seat Insert, Rockshaft Cylinder - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Part No: 173513)		$19.00
Valve Seat Insert, Rockshaft Cylinder - For tractor models 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, (JD300, JD400 SN# 146363 and up), JD301, JD401. (Part No: 173513)		$19.00
Valve Spool, Rockshaft Cylinder - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Part No: 151029)		$21.60
Valve Spool, Rockshaft Cylinder - For tractor models 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, (JD300, JD400 SN# 146363 and up), JD301, JD401. (Part No: 151029)		$21.60
Washer -
  • For John Deere tractor models 820 (non telescoping 3PT pull arms), 830 (non telescoping 3PT pull arms), 940 (European), 1020 (non telescoping 3PT pull arms), 1040 (European), 1120 (European), 1130 (European), 1520 (non telescoping 3PT pull arms), 1530 (non telescoping 3PT pull arms), 1630 (European), 1830 (European), 2020 (non telescoping 3PT pull arms), 2030 (non telescoping 3PT pull arms), 2040 (non telescoping 3PT pull arms), 2120 (European), 2130 (European), 2150 (European), 2155 (non telescoping 3PT pull arms), 2240 (non telescoping 3PT pull arms), 2255 (European), 2350 (non telescoping 3PT pull arms), 2355 (non telescoping 3PT pull arms), 2440 (non telescoping 3PT pull arms), 2550 (non telescoping 3PT pull arms), 2555 (non telescoping 3PT pull arms), 2630 (non telescoping 3PT pull arms), 2640 (non telescoping 3PT pull arms), 2750 (non telescoping 3PT pull arms), 2755 (non telescoping 3PT pull arms), 2840 (non telescoping 3PT pull arms), 2855 (non telescoping 3PT pull arms), 2940 (non telescoping 3PT pull arms), 2950 (non telescoping 3PT pull arms), 3055 (non telescoping 3PT pull arms), 3150 (non telescoping 3PT pull arms), 3155 (non telescoping 3PT pull arms), 3255 (non telescoping 3PT pull arms)< li>
  • Replaces John Deere OEM number T32488< li> < UL> (Part No: 176702)
$1.04
 
Hydraulic System
Arm Cylinder Seal Kit -
  • For John Deere Construction & industrial model 230< li>
  • Replaces John Deere OEM number 9207059< li>
  • Rod: 105 MM< li>
  • Bore: 140 MM< li> < UL> (Part No: 153110)
$79.00
Axle Hydraulic Pump, Remanufactured, RE60870 -
  • For John Deere tractor models 9100 (s n 030859-earlier), 9200 (s n 030859-earlier), 9300 (s n 030859-earlier), 9300T (s n 900548-earlier), 9400 (s n 030859-earlier), 9400T (s n 900548-earlier)< li>
  • Replaces John Deere OEM number RE60870< li> < UL> (Part No: 207010)
$630.01
Break-Away Coupler Overhaul Kit -
  • For John Deere tractor models 1020, 1520, 1530, 1640, 2010, 2020, 2030, 2040, 2040S, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3040, 3140, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AR82570< li> < UL> (Part No: 115326)
$27.00
Bucket Cylinder Seal Kit - Bore -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Compatible with John Deere Construction & industrial models 210C, 210LE, 300D, 310D, 315D< li>
  • Replaces John Deere OEM number AH212096< li> < UL> (Part No: 156626)
$40.26
Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Part No: 154893)		$15.50
Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Part No: 154893)		$15.50
Discharge Valve -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (sn:201000-later), 4010, 4020, 5010, 5020< li>
  • Replaces John Deere OEM number R27154< li> < UL> (Part No: 118793)
$19.76
Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9 16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Part No: 108512)		$3.30
Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9 16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Part No: 108512)		$3.30
Filter Assembly, Hydraulic Oil - 20 GPM Capacity Assembly with 10 Micron Element. 3 4 NPT ports. 4 inch diameter-7-1 2 inches long. Equipped with standard By-Pass Valve-opens at 15 PSI. Includes filter element. Order Replacement Element as part number 1A9021 (Part No: 182540)		$33.26
FILTER ELEMENT - 10 Micron replacement element for SF1-10. (Part No: 120092)$9.69
Front Hydraulic Pump Drive Clamp Half - This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3 8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Part No: 114098)		$15.00
Hydraulic Axle Lube Pump - Dynamatic -
  • For John Deere tractor models 9300T, 9320T, 9400T, 9420T, 9520T, 9620T< li>
  • Replaces John Deere OEM number RE168168< li>
  • Genuine Dynamatic pump< li>
  • Manufactured to exact OEM specifications< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 157690)
$455.00
Hydraulic Block-Off (Dummy Plug) - Fits all with locking nut style coupler. Measures 0.685 inches outside diameter, 5.377 inches overall length, For locking nut style coupler. Note: Fits PowerTrol SN # PCV-100 to 67904. Only fits early serial numbers. Later serial numbers use AA4321R. This part replaces AA3762R, AA4980R (Part No: 178584)		$49.26
Hydraulic Block Off Plug (Dummy Plug) - Used on Swinging style lever Powr-Trol Serial number PCV-67905 and up. This part has 1 2 inch pipe thread. This part replaces John Deere part numbers AA4981R, AA4321R (Part No: 178972)		$46.76
Hydraulic Breakaway Cartridge, Female -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE43891< li>
  • Style: Cartridge< li>
  • Body Size: 1 2"< li>
  • For machines with original design SCV< li>
  • It is recommended to purchase in quantities of two (Pressure and Return)< li> < UL> (Part No: 185717)
$98.01
Hydraulic Breakaway Coupler -
  • For John Deere tractor models 1040, 1140, 1550, 1640, 1750, 1850, 1850N, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4040S, 4050, 4055, 4240S, 4250, 4255, 4350, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8560, 8570, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number RE18834, RE15585, RE14358, RE10908< li> < UL> (Part No: 187055)
$70.00
Hydraulic Breakaway Coupler, Female -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5076E, 5080M, 5082E, 5083E, 5083EN, 5085E, 5085M, 5090E, 5090EH, 5090EL, 5090M, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101E, 5101EN, 5105, 5105M, 5105ML, 5115M, 5115ML, 5115R, 5125R, 5205, 5220, 5225, 5320, 5325, 5325N, 5420, 5425, 5425N, 5520, 5525, 5525N, 5625, 6100D, 6105D, 6110D, 6115D, 6120E, 6125D, 6130D, 6135E, 6140D, 6403, 6603< li>
  • Replaces John Deere OEM number RE255758< li>
  • Style: Push-Pull< li>
  • Max Pressure (PSI): 3625< li>
  • Body Size: 1 2"< li>
  • ISO: 9974-2< li>
  • Thread Size: 22mm x 1.5" ORB< li>
  • Thread Size: Male< li> < UL> (Part No: 168802)
$68.26
Hydraulic Breakaway Coupler, Female -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE43891< li>
  • Style: Cartridge< li>
  • Body Size: 1 2"< li>
  • For machines with original design SCV< li>
  • It is recommended to purchase in quantities of two (pressure & return)< li>
  • For Hydraulic Breakaway Coupler Kit, Female use Item #: 168803< li> < UL> (Part No: 177041)
$99.00
Hydraulic Charge Pump -
  • For John Deere tractor models 5220, 5225, 5320, 5325, 5420, 5425, 5520, 5525, 5625< li>
  • Compatible with John Deere Lawn & Garden(s) 400< li>
  • Replaces John Deere OEM number AM37342, AM35850, AM37152< li> < UL> (Part No: 168351)
$480.00
Hydraulic Coupler Breakaway Cartridge Kit, Female -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE43889, RE43891< li>
  • Style: Cartridge< li>
  • Body Size: 1 2"< li>
  • For machines with original design SCV< li>
  • It is recommended to purchase in quantities of two (Pressure and Return)< li> < UL> (Part No: 168803)
$117.00
Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Part No: 111302)		$5.76
Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Part No: 111302)		$5.76
Hydraulic Filter - Outside diameter 3.81 inch, inside diameter 1-3 8 inch, height 4.47 inch. Replaces AM102723. For tractor models: 4100, 4110, 4115, 4200, 4300, 4400, 4500, 4600, 4700, 4710, 655, 755, 756, 855, 856, 955. (Part No: 156462)		$35.00
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: 118257)		$10.20
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1 2 inch inside diameter. 2 Wire. Solid Male 1 2 inch NPT thread on both ends. (Part No: 179906)		$48.52
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1 2 inch I.D. double wire braid (SAE-2R) with 1 2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Part No: 118256)		$12.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: 118259)		$13.50
Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. There is an additional shipping cost for this product: $5.00 (Part No: 118260)		$14.00
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Part No: 118261)		$16.26
Hydraulic Lever Grip - For tractor models 80, 520, 530, 620, 630, 720, 730, 820, 830, 840. (Part No: 121739)		$8.89
Hydraulic Lever Guide - 2 piece. For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320, 4520, 4620, 6030, 7020, 7520. Replaces R41760. (Part No: 108182)		$55.55
Hydraulic Lift Shaft - For tractor models (1020 up to SN# 117499), 1120, 1030, 1130, 1630, 1520, 1530, 1640, 1840, 2040, 1830, 2030, 2130, 2020, 2120, 2030, (2040 SN# 350000 and up), 2150, 2255, 2155, 2355N, 2240, 2440, 2630, 2640, 2755, 2855N, 300B, 820, 920, 830, 930. (Part No: 125402)		$157.00
Hydraulic Pump - New pump has 8 pistons, keyed shaft with needle bearing 23cm, 13.5 G.P.M, 2750 P.S.I - no flow, 2000 P.S.I - max flow. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. (Part No: 109916)		$470.00
Hydraulic Pump - Splined shaft. Old fluid needs to be completely flushed-use clean new fluid. 1 1 16 inch Left inlet, 7 8 inch Top Inlet, 1 1 16 inch Right Inlet, 1 1 16 inch Right Discharge. 29.5 GPM. For tractor models (4000, 4020 SN# 258410 and up), (4320 4 WD SN# 014561 and up), (4520, 4620, 4230, 4430, 4630 4 WD), 8430, 8630, (4040, 4240, 4440, 4640, 4840 4 WD), 8440, 8640, 4650, 4850. Replaces AR94661. (Part No: 112640)		$1025.00
Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1 16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Part No: 165242)		$1050.00
Hydraulic Pump - 3 cubic inch, serialized pump, has two 1-1 16" inlet ports located directly across from each other. For tractor models 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 1950N, 2040S, 2355N, 2650N. (Part No: 165242)		$1050.00
Hydraulic Pump - For 454, 464, 484, 574, 584, 674, 684, 784, 884. Hydraulic Pump assembly, hydraulic power supply gear pump. Specifications: 18.1 GPM 68.52 LPM at 1, 000 RPM. Replaces 66513C92, 110509C91, 128180C91, 406763R92. (Part No: 112518)		$305.00
Hydraulic Pump - Hydraulic Pump 28 CM3 is for models 6010, 6020, 6105, 6110, 6115, 6120, 6125, 6130, 6140, 6210, 6215, 6220, 6230, 6310, 6320, 6330, 6405, 6410, 6415, 6420, 6425, 6430, 6510, 6520, 6530, 6605, 6610, 6615, 6620, 6630, 6715, 6830, 6930, 7130, 7230, 7330, 7505. (Part No: 150748)$435.00
Hydraulic Pump - Hydraulic Pump has 1 1 16 inch Left inlet, 7 8 inch Top Inlet, 1 5 8 Right Inlet, 1 1 16 inch Discharge. Verify measuerments before ordering. It is used on 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 300 Indust Const, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 500 Indust Const, 5010, 600 Indust Const, 9950 Cotton Picker, 9960 Cotton Picker, 9965 Cotton Picker, 9970 Cotton Picker. It replaces AR39168, AR90459, AR97872, R39695 (Part No: 114592)		$1150.00
Hydraulic Pump - Hydraulic Pump is used on John Deere Models: 5045, 5055, 5065, 5070M, 5103 serial number 001073 and later, 5203 serial number 000883 and later, 5303 serial number 000878 and later, 5403. This is a tandem pump. It replaces OEM part number (Part No: 123594)		$865.90
Hydraulic Pump - This new hydraulic pump is used on John Deere 1250, 1450 and 1650 compact tractors. 8cc. Replaces CH16636 (Part No: 182788)		$760.00
Hydraulic Pump - Used on John Deere 900HC compact tractor, this pump replaces OEM numbers AM875239, 194150-41110 (Part No: 124401)		$435.00
Hydraulic Pump -
  • For John Deere tractor models 510, 700, 710< li>
  • Replaces John Deere OEM number AL15149< li>
  • Gear type pump< li>
  • 11cc< li>
  • For tractors with power steering< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 114593)
$275.00
Hydraulic Pump -
  • For John Deere tractor models 500, 510, 700, 710< li>
  • Replaces John Deere OEM number AL16963, AL37752< li>
  • Gear type pump< li>
  • 16cc< li>
  • For tractors with power steering< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 114594)
$350.00
Hydraulic Pump -
  • For John Deere tractor models 830 (s n 258366-later), 1020, 1030, 1120, 1130, 1630, 1830, 2020 (s n 045199-earlier), 2030, 2120, 2130< li>
  • Compatible with John Deere Construction & industrial models 300 (s n 045199-earlier), 301 (with manual steering), 400 (s n 045199-earlier), 401 (with manual steering)< li>
  • Compatible with John Deere Hay Cutting(s) 930 (s n 258366-later)< li>
  • Replaces John Deere OEM number AR103034, AR39018, AR39167, AR89063< li>
  • Top Inlet: 1-1 16"< li>
  • Right Inlet: 1-1 16"< li>
  • Discharge: 3 4"< li>
  • 11 CM3< li>
  • 4 piston< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • For 8 piston pump use Item #: 109916< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114595)
$1200.00
Hydraulic Pump -
  • For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760< li>
  • Replaces John Deere OEM number AR101807, R101807< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: 1-5 8"< li>
  • Discharge: 1-1 16"< li>
  • Left Inlet: 1-1 16"< li>
  • 50cm, 3.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a Remanufactured version of this sku use Item #: 200413< li> < UL> (Part No: 115599)
$1084.32
Hydraulic Pump -
  • For John Deere Construction & industrial models 310B, 410, 500C, 540B, 640, 670, 740, 740A< li>
  • Replaces John Deere OEM number AR101288, AR52952, AR99845, AR101264< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: 1-5 8"< li>
  • Discharge: 1-1 16"< li>
  • Left Inlet: 1-3 8"< li>
  • 65cm, 4.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a Remanufactured version of this sku use Item #: 204468< li> < UL> (Part No: 121708)
$1050.00
Hydraulic Pump -
  • For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970 (Power Shift)< li>
  • Compatible with John Deere Construction & industrial models 300, 500, 600< li>
  • Replaces John Deere OEM number AR94660, R94660< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: 1-5 8"< li>
  • Left Inlet: 1-1 16"< li>
  • Discharge: 7 8"< li>
  • 50cm, 3.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a Remanufactured version of this sku use Item #: 200410< li> < UL> (Part No: 121710)
$1400.00
Hydraulic Pump -
  • For John Deere tractor models 5103 (s n 001072-later), 5105, 5200 (s n 111724-later), 5203 (s n 000882-later), 5205, 5210, 5215, 5220, 5300 (s n 121907-later), 5303 (s n 000877-later), 5310, 5310N, 5315, 5320, 5320N, 5400 (s n 131838-later), 5400N, 5403, 5500N< li>
  • Replaces John Deere OEM number RE197623, RE68886< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Displacement: 40 CM< li> < UL> (Part No: 128253)
$410.00
Hydraulic Pump -
  • For John Deere tractor models 820, 830, 920, 930, 2040< li>
  • Replaces John Deere OEM number AR55346, AL37750, AL36551, AL36552, AL36553< li>
  • 11cm, .69ci< li>
  • For tractor with power steering and open center hydraulics< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • For 6-5 8" pump use Item #: 107494< li> < UL> (Part No: 128340)
$295.00
Hydraulic Pump -
  • For John Deere tractor model 1050 (s n 011001-later)< li>
  • Replaces John Deere OEM number CH13990< li>
  • 11 cc< li>
  • Splined shaft< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 150288)
$669.00
Hydraulic Pump -
  • For John Deere tractor models 5076E, 5076EF, 5076EL, 5082E, 5083E, 5085E, 5090E, 5090EH, 5090EL, 5093E, 5100E, 5101E, 5320N, 5410 (s n 243687-later), 5415, 5415H, 5420, 5420N, 5425 (& H, HC), 5425H, 5425HC, 5425N, 5510 (s n 251893-later), 5510N (s n 357006-later), 5520, 5520N, 5603, 5605 (s n 019187-earlier, 019497-019867), 5615, 5625 (& HC), 5625HC, 5705 (s n 019187-earlier, 019497-019867), 5715, 5715HC, 5725 (& H, HC), 5725H, 5725HC, 5725N< li>
  • Replaces John Deere OEM number RE72058, RE73947< li>
  • Includes Elbow and Gear< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 151031)
$625.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 310E, 310G, 310J, 310K, 310SE, 310SG, 710D (s n 872329-later)< li>
  • Replaces John Deere OEM number AT179792< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 158533)
$862.29
Hydraulic Pump -
  • For John Deere tractor models 2130, 3010 (Relief Style), 3030, 3130, 4010 (Relief Style), 4020, 4040, 4240, 4440, 5010 (Relief Style)< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A< li>
  • Replaces John Deere OEM number AR56160< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: -< li>
  • Discharge: 7 8"< li>
  • Left Inlet: 1-1 16"< li>
  • 50cm, 3.0ci< li>
  • If transitioning from non-relief to a relief style pump (3010, 4010, 5010) a line kit will be required< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a Remanufactured version of this sku use Item #: 200408< li> < UL> (Part No: 161760)
$1075.00
Hydraulic Pump -
  • For John Deere tractor models 5083EN, 5093EN, 5425, 5425N, 5525, 5525N, 5625< li>
  • Replaces John Deere OEM number RE208450< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162188)
$975.00
Hydraulic Pump -
  • For John Deere tractor models 3120, 3320, 4210, 4310, 4410, 4510, 4610, 4710< li>
  • Replaces John Deere OEM number LVA11451< li> < UL> (Part No: 162191)
$345.00
Hydraulic Pump -
  • For John Deere tractor models 3203, 4200, 4210< li>
  • Replaces John Deere OEM number LVA10328< li> < UL> (Part No: 162192)
$580.00
Hydraulic Pump -
  • For John Deere tractor models 3120, 3320, 3520, 3720, 4210, 4310, 4410< li>
  • Replaces John Deere OEM number LVA11453< li> < UL> (Part No: 162193)
$315.00
Hydraulic Pump -
  • For John Deere tractor models 5225, 5325, 5325N< li>
  • Replaces John Deere OEM number RE197207< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162195)
$870.00
Hydraulic Pump -
  • For John Deere tractor models 4120, 4320, 4520, 4720< li>
  • Replaces John Deere OEM number LVA12934< li> < UL> (Part No: 162196)
$645.00
Hydraulic Pump -
  • For John Deere tractor models 6130, 6225, 6230, 6325< li>
  • Replaces John Deere OEM number AL200179< li> < UL> (Part No: 162200)
$510.00
Hydraulic Pump -
  • For John Deere tractor models 6405, 6605< li>
  • Replaces John Deere OEM number AL163918< li> < UL> (Part No: 162201)
$465.00
Hydraulic Pump -
  • For John Deere tractor models 5085M, 5095M, 5105M, 5105ML< li>
  • Replaces John Deere OEM number SJ13609< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162213)
$950.00
Hydraulic Pump -
  • For John Deere tractor models 5085M, 5095M, 5105M, 5105ML< li>
  • Replaces John Deere OEM number SJ13340< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162215)
$925.00
Hydraulic Pump -
  • For John Deere tractor models 5085M, 5100M, 5100MH, 5115M< li>
  • Replaces John Deere OEM number SJ22726< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162216)
$1200.00
Hydraulic Pump -
  • For John Deere tractor models 5200 (s n 111723-earlier), 5300 (s n 121906-earlier), 5400 (s n 131837-earlier)< li>
  • Replaces John Deere OEM number RE40444< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162217)
$925.00
Hydraulic Pump -
  • For John Deere tractor models 4200, 4300, 4400, 4500, 4600, 4700< li>
  • Replaces John Deere OEM number LVA10330< li> < UL> (Part No: 162219)
$710.00
Hydraulic Pump -
  • For John Deere tractor models 4300, 4400< li>
  • Replaces John Deere OEM number LVA10329< li> < UL> (Part No: 162220)
$430.00
Hydraulic Pump -
  • For John Deere tractor models 4500, 4600, 4700< li>
  • Replaces John Deere OEM number LVA10331< li> < UL> (Part No: 162221)
$465.00
Hydraulic Pump -
  • For John Deere tractor models 4510, 4610, 4710< li>
  • Replaces John Deere OEM number LVA11452< li> < UL> (Part No: 162222)
$315.00
Hydraulic Pump -
  • For John Deere tractor models 1023E, 1025R, 1026R< li>
  • Replaces John Deere OEM number LVA19035< li> < UL> (Part No: 162229)
$280.00
Hydraulic Pump -
  • For John Deere tractor models 3033R, 3038R, 3039R, 3045R, 3046R, 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M, 4066R< li>
  • Replaces John Deere OEM number LVA19072< li> < UL> (Part No: 162231)
$280.00
Hydraulic Pump -
  • For John Deere tractor models 3033R, 3038R, 3039R, 3045R, 3046R< li>
  • Replaces John Deere OEM number LVA18102< li> < UL> (Part No: 162232)
$405.00
Hydraulic Pump -
  • For John Deere tractor models 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M, 4066R< li>
  • Replaces John Deere OEM number LVA19073< li> < UL> (Part No: 162233)
$430.00
Hydraulic Pump -
  • For John Deere tractor model 5500< li>
  • Replaces John Deere OEM number RE68887, RE58437< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162234)
$1200.00
Hydraulic Pump -
  • For John Deere tractor models 5410 (s n 243686-earlier), 5415, 5415H, 5510 (s n 251891-earlier), 5510N (s n 357005-earlier), 5615, 5715, 5715HC< li>
  • Replaces John Deere OEM number RE69866< li>
  • Includes Elbow and Gear< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 162235)
$1325.00
Hydraulic Pump -
  • For John Deere tractor models 755, 855< li>
  • Compatible with John Deere Lawn & Garden(s) F1145< li>
  • Replaces John Deere OEM number AM880199< li> < UL> (Part No: 164196)
$570.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 300D, 310D, 315< li>
  • Replaces John Deere OEM number AT164404< li> < UL> (Part No: 165067)
$1400.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 544E, 544E LL, 544E TC, 624E, 644E, 644ER< li>
  • Replaces John Deere OEM number AT318659, AT139444< li> < UL> (Part No: 165398)
$2575.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 444, 544, 544A< li>
  • Replaces John Deere OEM number AT57568, AT24840, AT55304< li> < UL> (Part No: 168172)
$964.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 700H, 700J< li>
  • Replaces John Deere OEM number AT224356< li> < UL> (Part No: 168350)
$1150.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 644E, 644ER< li>
  • Replaces John Deere OEM number AT103946< li>
  • Open Center< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 168353)
$2000.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 350C, 350D, 355D, 450C< li>
  • Replaces John Deere OEM number AT181864, AT31212< li> < UL> (Part No: 168532)
$475.00
Hydraulic Pump -
  • For John Deere tractor model 6403< li>
  • Replaces John Deere OEM number RE241577< li> < UL> (Part No: 169712)
$500.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 544E, 544G, 544G LL, 544G TC, 624E, 624G< li>
  • Replaces John Deere OEM number AT103944< li>
  • Open Center< li> < UL> (Part No: 169737)
$2175.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 350, 350B, 350C, 350D, 355D, 450, 450B, 450C, 450D< li>
  • Replaces John Deere OEM number AT436900, AT38801< li> < UL> (Part No: 170203)
$1030.00
Hydraulic Pump -
  • For John Deere Construction & industrial model 624G< li>
  • Replaces John Deere OEM number AT143542 < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 170204)
$2100.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 544B, 646, 646B< li>
  • Replaces John Deere OEM number AT57563 < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 170205)
$1097.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 450G, 455G, 550G, 650G< li>
  • Replaces John Deere OEM number AT159745 < li> < UL> (Part No: 170618)
$940.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 670C (s n: 582130-later, Series II Graders), 670CH (s n: 582130-later, Series II Graders), 672CH (s n: 582130-later, Series II Graders), 770C (s n: 582130-later, Series II Graders), 770CH (s n: 582130-later, Series II Graders), 772CH (s n: 582130-later, Series II Graders)< li>
  • Replaces John Deere OEM number AT280243 < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 171549)
$4900.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 460D, 640G (III), 648G (III)< li>
  • Replaces John Deere OEM number AT334785 < li> < UL> (Part No: 171562)
$440.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 350B, 350C, 350D, 355D, 400G, 440, 440A, 440B, 450B, 450C, 450D, 450E, 455D, 455E, 540, 540A, 550, 550A, 550B, 555, 555A, 555B< li>
  • Replaces John Deere OEM number AT33822 < li> < UL> (Part No: 171571)
$970.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 450, 450B, 450C, 455D, 743A< li>
  • Replaces John Deere OEM number AT38800 < li> < UL> (Part No: 171572)
$650.00
Hydraulic Pump -
  • For John Deere Construction & industrial models 550 (Crawler Bulldozer), 550A (Crawler Bulldozer)< li>
  • Replaces John Deere OEM number AT41450 < li> < UL> (Part No: 171837)
$1060.00
Hydraulic Pump -
  • For John Deere tractor models 6090MC, 6095MC, 6100MC, 6105M, 6105MC, 6110M, 6115M, 6115MC, 6120M, 6125M, 6130, 6130M, 6135M, 6140M, 6145M, 6150M, 6230, 6330, 6430, 6530, 6534, 6630, 6830, 6930, 7130, 7230, 7330< li>
  • Replaces John Deere OEM number AL202473< li>
  • 35 cm3< li> < UL> (Part No: 187049)
$823.00
Hydraulic Pump Drive Coupler - For 3020, 4000, 4020, 5010, 5020. Hydraulic Pump Drive Coupler. (3068R) (Part No: 108933)		$74.00
Hydraulic Pump Drive Coupler - For 4040, 4230, 4320, 4520, 4620, 7020. Hydraulic Pump Drive Coupler. (3069R) (Part No: 110315)$131.00
Hydraulic Pump Drive Coupler - For tractor models 4240, 4430, 4440, 4630. Hydraulic Pump Drive Coupler. 8.25 inches Long, 14 Spline. (Part No: 121444)		$99.80
Hydraulic Pump Drive Coupler Half - Two required for 1 complete coupler. For tractor models JD300, JD301, JD400, 301A, 302, 3030, 3120, 3130, 401B, JD380, 401C, 480C, (830, 930 SN# 258366 and up), (1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 300B, 1030 all with small pump). (Part No: 113925)		$12.50
Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Part No: 154894)		$14.50
Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Part No: 154894)		$14.50
Hydraulic Pump Drive Coupling - Splined -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 9940 (s n 16000-earlier), 9950, 9960, 9965< li>
  • Compatible with John Deere Construction & industrial models 770, 772< li>
  • Replaces John Deere OEM number R72739< li>
  • For a used versaion of this item use 425362< li> < UL> (Part No: 125362)
$20.50
Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Part No: 114011)		$7.90
Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Part No: 114011)		$7.90
Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is 7.785 inches long with a 0.877 inch diameter, keyed hole. It is used with coupling parts R78202, L34432 and L34569. It replaces original part number L34572 (Part No: 160350)		$67.00
Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is 7.370 inches long and has 14 splines. It replaces original part number L34573 (Part No: 112005)		$110.00
Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is used on 940, 1040, 1140, 1550 before serial 621999, 1750 before serial number 621999, 1850 before serial number 621999, 2040, 2150, 2155 before serial number 621999, 2240 after serial number 350000, 2255. Pump drive shaft is 4.654 inches (118.22mm) long overall, inside diameter of 0.867 inches (22.04mm) with key way. Replaces original part numbers L34570 (Part No: 160342)		$38.00
Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is used on John Deere 2955, 3050, 3055, 3155, 3255, 3350, 3650. Replaces L42188 (Part No: 167886)		$221.00
Hydraulic Pump Drive Shaft - This drive shaft was original equipment on some of the following John Deere models: 2030, 2440 (s n 340999-earlier), 2630, 2640 (s n 340999-earlier), 300, 300B, 302, 302A, 400, 401. Measures 4.370 inches overall length, 14 splines, with 2-13 16 inch center to center bolt spacing. This part is used with R34360 drive pins, R38348 coupler halves, and R45822 bushings (each sold separately). Replaces T22915, AT42308, YTO T22915 (Part No: 100020)		$102.39
Hydraulic Pump Drive Shaft Coupler - 6.312 inches long, 14 spline. For tractor models (444, 544, 644, 646, 762 all industrials), 2840, 3030, 3130, 4040, 4230. (Part No: 121445)		$126.90
Hydraulic Pump Drive Shaft Coupler -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R71612< li>
  • Length: 10.875"< li>
  • Splines: 14< li> < UL> (Part No: 116944)
$230.00
Hydraulic Pump - Dynamatic -
  • For John Deere Construction & industrial models 710B, 710C< li>
  • Replaces John Deere OEM number AT117689< li>
  • Genuine Dynamatic pump< li>
  • Manufactured to exact OEM specifications< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 157687)
$370.00
Hydraulic Pump - Dynamatic, RE182200 -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520< li>
  • Replaces John Deere OEM number RE182200< li>
  • Genuine Dynamatic pump< li>
  • Manufactured to exact OEM specifications< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 157665)
$1250.00
Hydraulic Pump - Dynamatic, RE37755 -
  • For John Deere tractor models 8560, 8760, 8960< li>
  • Replaces John Deere OEM number RE37755< li>
  • Genuine Dynamatic pump< li>
  • Manufactured to exact OEM specifications< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • For a New version of this sku use Item #: 157662< li> < UL> (Part No: 157663)
$700.00
Hydraulic Pump Hex Coupler -
  • For John Deere tractor models 650, 750< li>
  • Replaces John Deere OEM number CH15485< li>
  • Replaces OEM number 129350-26160< li> < UL> (Part No: 186443)
$38.57
Hydraulic Pump Inlet Valve -
  • For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 4240, 4250, 4255, 4320, 4430, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Construction & industrial models 500, 600, 700A< li>
  • Replaces John Deere OEM number AR53301< li>
  • 2.4 cu. in. Serialized & Non-Serialized < li>
  • 3 cu. in. Serialized & Non-Serialized< li>
  • 4 cu. in. Serialized & Non-Serialized< li> < UL> (Part No: 113886)
$30.00
Hydraulic Pump Line Kit -
  • For John Deere tractor models 3010, 4010, 5010< li>
  • Replaces John Deere OEM number AR39810< li>
  • Kit is used when replacing a non-relief style hydraulic pump with a relief style hydraulic pump< li> < UL> (Part No: 112641)
$102.00
Hydraulic Pump Packing -
  • For John Deere tractor models 301, 500, 600, 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2951, 2955 (s n 767516-earlier), 3010 (s n 049999-earlier), 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000 (s n 201000-later), 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8100, 8200, 8300, 8400, 8430 (1974-1981), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 7445 (s n 275483, 4.219 engine)< li>
  • Compatible with John Deere Construction & industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350, 350B, 350C, 350D, 380, 401B, 410, 410C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 444D, 444E, 450 (with 3320 or 3325 winch), 450B, 450C, 480, 480A, 480B, 480C, 500A (s n 123113-earlier), 500A (s n 123114-152141), 500B, 500C, 510, 540, 540A, 540B, 540E, 544, 544A, 544B, 544D, 544E, 548E, 570, 570A, 624E, 640, 640E, 644A, 644B, 644C, 644D, 646, 646B, 646C, 648E, 690, 690A, 710B, 710C, 740, 740A, 740E, 748E, 760 (s n 123113-earlier), 844, 860, 860A, 862< li>
  • Compatible with John Deere Engine(s) 6359T, 6466D, 6466T< li>
  • Compatible with John Deere Hay Cutting(s) 2270 (s n 275483, 4.219 engine)< li>
  • Replaces John Deere OEM number R26149< li> < UL> (Part No: 113996)
$3.66
Hydraulic Pump Piston -
  • For John Deere tractor models 4000 (s n 201000-later), 4020 (s n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number R70976< li> < UL> (Part No: 113591)
$12.00
Hydraulic Pump Piston -
  • For John Deere tractor models 1550, 1750, 1830, 1850, 1950, 2030, 2040, 2140, 2250, 2450, 2650, 2850, 3020, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650, 4000, 4010, 4020, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4440, 4450, 4455, 4520, 4620, 4630, 4640< li>
  • Replaces John Deere OEM number R27150< li> < UL> (Part No: 113877)
$11.00
Hydraulic Pump Piston Spring -
  • For John Deere tractor models 2440, 4040, 4240, 4440< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310, 310A, 340D, 400, 401, 401C, 410B, 415B, 440, 440A, 440B, 440C, 444, 444C, 444CH, 500, 500A, 500B, 510, 515B, 540, 540A, 540B, 544, 544A, 544B, 544C, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 670A, 672A, 700A, 740, 740A, 760, 760A, 770, 770A, 772A, 4400< li>
  • Replaces John Deere OEM number R62372, AR55186, AR76762, AR33821< li> < UL> (Part No: 113866)
$2.66
Hydraulic Pump Plug, 4" -
  • For John Deere tractor models 4000 (s n 201000-later), 4020 (s n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number R70648< li> < UL> (Part No: 165700)
$7.66
Hydraulic Pump, Remanufactured, AL75305 -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7505, 7510, 7600, 7610 (s n 089999 - earlier), 7700, 7710 (s n 089999 - earlier), 7800, 7810, 7810 (s n 089999 - earlier)< li>
  • Replaces John Deere OEM number AL75305< li>
  • For a New version of this sku use Item #: 156290< li> < UL> (Part No: 210042)
$2150.01
Hydraulic Pump, Remanufactured, AR101288 -
  • For John Deere Construction & industrial models 310B, 410, 500C, 540B, 640, 670, 740, 740A< li>
  • Replaces John Deere OEM number AR101288, AR52952, AR99845, AR101264< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: 1-5 8"< li>
  • Discharge: 1-1 16"< li>
  • Left Inlet: 1-3 8"< li>
  • 65cm, 4.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a New version of this sku use Item #: 121708< li> < UL> (Part No: 204468)
$1100.01
Hydraulic Pump, Remanufactured, AR101807 -
  • For John Deere tractor models 510, 1640, 2040, 2140, 2955, 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4520, 4620, 4630, 5010, 5020, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310, 340D, 400, 401, 401C, 401D, 440, 440C, 440D, 444, 448D, 500, 540, 540B, 540D, 544, 548D, 570, 570B, 600, 640, 640D, 644, 646, 700A, 760< li>
  • Replaces John Deere OEM number AR101807, R101807< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: 1-5 8"< li>
  • Discharge: 1-1 16"< li>
  • Left Inlet: 1-1 16"< li>
  • 50cm, 3.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a New version of this sku use Item #: 115599< li> < UL> (Part No: 200413)
$980.01
Hydraulic Pump, Remanufactured, AR38217 -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number AR38217< li>
  • Top Inlet: 7 8"< li>
  • Discharge: 7 8"< li>
  • Left Inlet: 1-1 16"< li>
  • 4 pistons< li>
  • 24.5cm, 1.5ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 205387)
$980.01
Hydraulic Pump, Remanufactured, AR94660 -
  • For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650, 4010, 4030, 5010< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 300, 500, 600< li>
  • Replaces John Deere OEM number AR94660, R94660< li>
  • Top Inlet: 7 8"< li>
  • RH Inlet: 1-5 8"< li>
  • LH Inlet: 1-1 16"< li>
  • Discharge: 7 8"< li>
  • 50cm, 3.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a New version of this sku use Item #: 121710< li> < UL> (Part No: 200410)
$980.01
Hydraulic Pump, Remanufactured, AT12670 -
  • For John Deere tractor model 2010 (s n 021885-earlier With Manual Steering)< li>
  • Replaces John Deere OEM number AT12670< li>
  • GPM: 7< li>
  • Due to core availability, at times we may need to rebuild Your < U>core. You will be contacted within 1 business day if this is required.< B>< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 204467)
$1325.01
Hydraulic Pump, Remanufactured, RE20839 -
  • For John Deere tractor models 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number RE20839, AR94661, R71587< li>
  • Top Inlet: 7 8"< li>
  • Right Inlet: 1-1 16"< li>
  • Discharge: 1-1 16"< li>
  • Left Inlet: 1-1 16"< li>
  • 65cm, 4.0ci< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Be sure to completely clean out the drain back line. If this is not completely cleared it will cause the pump to leak out of the front seal< li>
  • For a New version of this sku use Item #: 112640< li> < UL> (Part No: 200415)
$1100.01
Hydraulic Pump, Remanufactured, RE23381 -
  • For John Deere tractor models 2355, 2555, 2755, 2855N, 2955 (s n 767516-earlier), 3055, 3155, 3255< li>
  • Replaces John Deere OEM number RE23381< li>
  • Drive Thru Pump< li>
  • 40CM3< li> < UL> (Part No: 211132)
$1750.01
Hydraulic Pump, Remanufactured, RE60267 -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number RE60267< li>
  • Splines: 15< li>
  • Shaft Diameter: 1"< li> < UL> (Part No: 211161)
$1795.01
Hydraulic Pump Repair Kit -
  • For John Deere tractor models 930, 940, 1020, 1030, 1040, 1140, 1350, 1520, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2250, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 301A, 302, 400, 401, 401B, 401D, 840< li>
  • Replaces John Deere OEM number AL35755< li> < UL> (Part No: 113896)
$155.00
Hydraulic Pump Seal Drain Line -
  • For John Deere tractor models 2510, 4030, 4040, 4040S, 4230, 4430< li>
  • Replaces John Deere OEM number AR87534, AR39691, AR42285, AR79709< li> < UL> (Part No: 167961)
$33.76
Hydraulic Pump Seal Kit - Repairs AR103033 (23CMS) & AR103035 (11.3 CMS) Hydraulic Pumps. For JD 300, 301, 400, 401, 1020, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2941, 2951, 301A, 302, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3640, 3641, 3650, 3651, 4010, 7440, 7445, 830, 840, 930, 940, 1040. Industrials: 301, 400, 401. (Part No: 113893)		$23.76
Hydraulic Pump Seal & O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Part No: 114400)		$97.00
Hydraulic Pump Seal & O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Part No: 113864)		$46.70
Hydraulic Pump Shaft - Hydraulic Pump Drive Shaft is 4.77 inches long with a 0.877 inch diameter, keyed hole. It is used with coupling parts R78202, L34432 and L34569. It replaces original part number T22914 (Part No: 121446)		$46.00
Hydraulic Pump Spring Pack - Set of 8 -
  • For John Deere tractor models 830, 930, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2630, 2640, 3030, 3120, 3130< li>
  • Compatible with John Deere Harvester(s) 7440, 7445, 9920, 9930, 9940, 9950< li>
  • Replaces John Deere OEM number AL71018, AR39041< li>
  • Sold as a set of 8 springs< li> < UL> (Part No: 113898)
$7.46
Hydraulic Pump Stroke Control Valve - For tractor models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Part No: 113888)		$31.00
Hydraulic Pump Stroke Control Valve - For tractor models 5020, 6030, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, 9950, 9960, 9965, 2350, 2550, 2750, 3150, 3640, 4350, 4620, 4630, 4650, 4755, 4955, 7020. Replaces R70559, AR64604, R55464, R65192, R65194, R65193. (Part No: 113888)		$31.00
Hydraulic Pump - Wagon Tilt - Dynamatic -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520< li>
  • Replaces John Deere OEM number RE194536< li>
  • Genuine Dynamatic pump< li>
  • Manufactured to exact OEM specifications< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 157668)
$1250.00
Hydraulic Quick Coupler Female Coupling -
  • For John Deere tractor models 1640 (s n: 430000-later), 2040 (s n: 430000-later), 2040S (s n: 430000-later), 2140 (s n: 430000-later), 2250 (Euro Edition), 2355 (GTP), 2450 (Euro Edition), 2555 (GTP), 2650 (Euro Edition), 2755 (GTP), 2850 (Euro Edition), 2955 (s n: 765516-earlier), 3040 (Euro Edition, s n: 430000-later), 3050 (Euro Edition), 3140 (Euro Edition, s n: 430000-later), 3150, 3255, 3350 (Euro Edition), 3640 (S, Euro Edition), 3640, 3650 (Euro Edition), 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 (74-81), 8450, 8630, 8650, 9100, 9200, 9300, 9400, 9400T< li>
  • Replaces John Deere OEM number AR58287< li>
  • Suction Side< li> < UL> (Part No: 176344)
$23.50
Hydraulic Quick Coupler Socket, Spool Type -
  • For John Deere tractor models 1350, 1550, 1750, 1850, 1950, 1950N, 2150, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3050, 3055, 3155, 3255, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number AL172304< li>
  • Overall Length: 2.453"< li>
  • Thread: Metric< li>
  • Thread Size: .709"< li> < UL> (Part No: 171459)
$15.76
Hydraulic Reservoir -
  • For John Deere tractor models 5065M, 5075M, 5085M, 5090M, 5090R, 5095M, 5100M, 5100MH, 5100R, 5105M, 5105ML, 5115M, 6105D, 6105E, 6110, 6110L, 6115D, 6120, 6120E, 6120L, 6130D, 6135E, 6140D, 6140J, 6155J, 6200, 6200L, 6210, 6210L, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 7200R, 7210R, 7215R, 7220, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 7320, 7420, 7520, 7610, 7630, 7710, 7720, 7730, 7810, 7820, 7830, 7920, 7930, 8245R, 8270R, 8295R, 8320R, 8320RT, 8335R, 8345R, 8345RT, 8370R, 8370RT, 8400R< li>
  • Replaces John Deere OEM number L100937< li> < UL> (Part No: 162103)
$28.76
Hydraulic Seal Kit - Angle Cylinder -
  • For John Deere Construction & industrial models 450, 450B, 450C, 450D, 450E, 550, 550B< li>
  • Replaces John Deere OEM number AR105432< li>
  • Rod: 1-1 2"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 152867)
$26.50
Hydraulic Seal Kit - Angle Cylinder -
  • For John Deere Construction & industrial models 310, 450, 544, 750, 850< li>
  • Replaces John Deere OEM number AH212088< li> < UL> (Part No: 152919)
$8.06
Hydraulic Seal Kit - Angle Cylinder -
  • For John Deere Construction & industrial models TC54, 450, 544< li>
  • Replaces John Deere OEM number AH153497< li>
  • Rod: 40"< li>
  • Bore: 63"< li> < UL> (Part No: 152996)
$64.90
Hydraulic Seal Kit - Angle Cylinder -
  • For John Deere Construction & industrial model 450< li>
  • Replaces John Deere OEM number RE37004< li>
  • Rod: 40 MM< li>
  • Bore: 70 MM< li> < UL> (Part No: 153364)
$5.76
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 200< li>
  • Replaces John Deere OEM number AH148453< li>
  • Rod: 95 MM< li>
  • Bore: 130 MM< li> < UL> (Part No: 153045)
$175.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 490< li>
  • Replaces John Deere OEM number AT177556< li>
  • Rod: 80 MM< li>
  • Bore: 110 MM< li> < UL> (Part No: 153049)
$120.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 120< li>
  • Replaces John Deere OEM number AH149796< li>
  • Rod: 80 MM< li>
  • Bore: 110 MM< li> < UL> (Part No: 153081)
$186.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 230, 790< li>
  • Replaces John Deere OEM number AT183658< li> < UL> (Part No: 153089)
$93.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 35C (ZTS)< li>
  • Replaces John Deere OEM number 849304< li> < UL> (Part No: 153105)
$46.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 200< li>
  • Replaces John Deere OEM number AH173444< li>
  • Rod: 95 MM< li>
  • Bore: 135 MM< li> < UL> (Part No: 153136)
$110.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 790< li>
  • Replaces John Deere OEM number AT154868< li>
  • Rod: 100 MM< li>
  • Bore: 135 MM< li> < UL> (Part No: 153151)
$87.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 892< li>
  • Replaces John Deere OEM number AT196472< li>
  • Rod: 110 MM< li>
  • Bore: 165 MM< li> < UL> (Part No: 153154)
$146.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 792< li>
  • Replaces John Deere OEM number TH103347< li>
  • Rod: 110 MM< li>
  • Bore: 160 MM< li> < UL> (Part No: 153176)
$118.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 490, 493< li>
  • Replaces John Deere OEM number TH109366< li>
  • Rod: 80 MM< li>
  • Bore: 115 MM< li> < UL> (Part No: 153177)
$72.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 35 ZTS< li>
  • Replaces OEM number 744408< li> < UL> (Part No: 153182)
$87.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 230, 240, 250, 270< li>
  • Replaces John Deere OEM number 4369943< li>
  • Rod: 105 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153185)
$138.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 80< li>
  • Replaces John Deere OEM number 4415584< li>
  • Rod: 60 MM< li>
  • Bore: 95 MM< li> < UL> (Part No: 153186)
$65.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 80< li>
  • Replaces John Deere OEM number 4464985< li>
  • Rod: 60 MM< li>
  • Bore: 95 MM< li> < UL> (Part No: 153188)
$53.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 230< li>
  • Replaces John Deere OEM number 4631062< li>
  • Rod: 105 MM< li>
  • Bore: 140 MM< li> < UL> (Part No: 153196)
$114.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 35D< li>
  • Replaces OEM number 4634034< li>
  • Rod: 45 MM< li>
  • Bore: 75 MM< li> < UL> (Part No: 153198)
$48.26
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 50D< li>
  • Replaces John Deere OEM number 4634036< li>
  • Rod: 50 MM< li>
  • Bore: 80 MM< li> < UL> (Part No: 153199)
$49.26
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 330, 350, 370< li>
  • Replaces John Deere OEM number 4640118< li>
  • Rod: 115 MM< li>
  • Bore: 170 MM< li> < UL> (Part No: 153201)
$202.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 225CLC< li>
  • Replaces OEM number 4661594< li>
  • Rod: 95 MM< li>
  • Bore: 135 MM< li> < UL> (Part No: 153202)
$110.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 690D, 790D< li>
  • Replaces John Deere OEM number AT114831< li>
  • Rod: 95 MM< li>
  • Bore: 135 MM< li> < UL> (Part No: 153279)
$94.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 992< li>
  • Replaces John Deere OEM number AT132412< li>
  • Rod: 130 MM< li>
  • Bore: 190 MM< li> < UL> (Part No: 153282)
$180.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 790< li>
  • Replaces John Deere OEM number AT176734< li>
  • Rod: 105 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153285)
$136.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 590< li>
  • Replaces John Deere OEM number AT192075< li>
  • Rod: 85 MM< li>
  • Bore: 120 MM< li> < UL> (Part No: 153287)
$62.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 200, 270< li>
  • Replaces John Deere OEM number AT264438< li>
  • Rod: 100 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153292)
$181.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 330, 370< li>
  • Replaces John Deere OEM number AT264441< li>
  • Rod: 115 MM< li>
  • Bore: 170 MM< li> < UL> (Part No: 153295)
$180.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 450< li>
  • Replaces John Deere OEM number AT302758< li>
  • Rod: 130 MM< li>
  • Bore: 190 MM< li> < UL> (Part No: 153296)
$198.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 27C (ZTS), 27 ZTS< li>
  • Replaces OEM number TH0744010< li> < UL> (Part No: 153366)
$30.26
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 790< li>
  • Replaces John Deere OEM number TH102827< li>
  • Rod: 105 MM< li>
  • Bore: 150 MM< li> < UL> (Part No: 153368)
$102.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 70< li>
  • Replaces John Deere OEM number TH106099< li>
  • Rod: 60 MM< li>
  • Boom: 100 MM< li> < UL> (Part No: 153370)
$91.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 790D< li>
  • Replaces John Deere OEM number TH110064< li>
  • Rod: 100 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153373)
$102.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 70D< li>
  • Replaces John Deere OEM number TH110662< li>
  • Rod: 60 MM< li>
  • Bore: 100 MM< li> < UL> (Part No: 153376)
$47.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 892< li>
  • Replaces John Deere OEM number TH111627< li>
  • Rod: 110 MM< li>
  • Bore: 165 MM< li> < UL> (Part No: 153380)
$152.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial models 792, 892< li>
  • Replaces John Deere OEM number TH111854< li>
  • Rod: 105 MM< li>
  • Bore: 150 MM< li> < UL> (Part No: 153382)
$137.00
Hydraulic Seal Kit - Arm Cylinder -
  • For John Deere Construction & industrial model 120< li>
  • Replaces John Deere OEM number 4448396< li> < UL> (Part No: 153551)
$101.00
Hydraulic Seal Kit - Backhoe Boom Cylinder -
  • For John Deere Construction & industrial models 401D, 410B, 410C, 440C, 440D, 510B, 510C, 540B, 540D, 610B, 610C, 640, 640D, 648D, 862< li>
  • Replaces John Deere OEM number RE16118< li>
  • Bore: 4"< li> < UL> (Part No: 152898)
$43.76
Hydraulic Seal Kit - Backhoe Crowd Cylinder -
  • For John Deere Construction & industrial models 300, 302, 350, 355, 400, 401, 444, 450, 455, 544, 550< li>
  • Replaces John Deere OEM number RE18755< li>
  • Rod: 1-3 4"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 152974)
$29.26
Hydraulic Seal Kit - Backhoe Stabilizer Cylinder -
  • For John Deere Construction & industrial models 510, 640, 655, 655B, 750B, 750C, 850, 850B< li>
  • Replaces John Deere OEM number RE17345< li> < UL> (Part No: 157023)
$23.26
Hydraulic Seal Kit - Blade Bucket Cylinder -
  • For John Deere Construction & industrial model 70< li>
  • Replaces John Deere OEM number TH110663< li>
  • Rod: 55 MM< li>
  • Bore: 90 MM< li> < UL> (Part No: 153377)
$52.00
Hydraulic Seal Kit - Blade Cylinder -
  • For John Deere Construction & industrial model 80< li>
  • Replaces John Deere OEM number 4465736< li> < UL> (Part No: 153190)
$60.00
Hydraulic Seal Kit - Blade Cylinder -
  • For John Deere Construction & industrial model 35D< li>
  • Replaces OEM number 4622066< li>
  • Rod: 45 MM< li>
  • 95 MM< li> < UL> (Part No: 153195)
$72.00
Hydraulic Seal Kit - Blade Lift Cylinder -
  • For John Deere Construction & industrial models 310, 410, 450, 510, 550, 650, 710, 710D< li>
  • Replaces John Deere OEM number RE37003< li>
  • Bore: 80 MM< li> < UL> (Part No: 152988)
$8.06
Hydraulic Seal Kit - Blade Lift Cylinder -
  • For John Deere Construction & industrial models 415, 440C, 515< li>
  • Replaces John Deere OEM number RE14082< li>
  • Bore: 3"< li> < UL> (Part No: 153332)
$35.76
Hydraulic Seal Kit - Blade Lift Cylinder -
  • For John Deere Construction & industrial models 670, 672< li>
  • Replaces John Deere OEM number RE18747< li>
  • Rod: 2"< li>
  • Bore: 3-1 4"< li> < UL> (Part No: 153353)
$30.26
Hydraulic Seal Kit - Blade Tilt Cylinder -
  • For John Deere Construction & industrial models 670, 672, 770, 772< li>
  • Replaces John Deere OEM number RE18736< li>
  • Rod: 1-3 4"< li>
  • Bore: 4"< li> < UL> (Part No: 153349)
$30.26
Hydraulic Seal Kit - Boom Arm Cylinder -
  • For John Deere Construction & industrial models 690, 693< li>
  • Replaces John Deere OEM number AT114822< li>
  • Rod: 85 MM< li>
  • Bore: 125 MM< li> < UL> (Part No: 153088)
$78.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models 410, 510, 544, 610, 624, 710, 862< li>
  • Replaces John Deere OEM number RE25151< li>
  • Rod: 63 MM< li> < UL> (Part No: 152935)
$63.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models TC44, 210, 310, 410, 444, 444H, 650, 710, 750, 850< li>
  • Replaces John Deere OEM number AH212101< li> < UL> (Part No: 152949)
$46.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial model 544< li>
  • Replaces John Deere OEM number RE14910< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 152984)
$80.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial model 892< li>
  • Replaces John Deere OEM number AT196475< li>
  • Rod: 100 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153090)
$125.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models TC54, 310, 544, 710< li>
  • Replaces John Deere OEM number AH149845< li> < UL> (Part No: 153127)
$62.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models 624, 644, 710, 724, 744, 824< li>
  • Replaces John Deere OEM number AH159192< li>
  • Rod: 95 MM< li> < UL> (Part No: 153258)
$80.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models 490, 590< li>
  • Replaces John Deere OEM number AT194335< li>
  • Rod: 80 MM< li>
  • Bore: 115 MM< li> < UL> (Part No: 153288)
$129.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial model 844< li>
  • Replaces John Deere OEM number RE15708< li> < UL> (Part No: 153336)
$52.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models 844, 890, 990< li>
  • Replaces John Deere OEM number RE21202< li>
  • Rod: 3-3 4"< li> < UL> (Part No: 153360)
$91.00
Hydraulic Seal Kit - Boom Bucket Cylinder -
  • For John Deere Construction & industrial models 450, 550, 644, 650, 744, 824, 1510< li>
  • Replaces John Deere OEM number AH149813< li> < UL> (Part No: 153683)
$29.00
Hydraulic Seal Kit - Boom/Crowd Cylinder -
  • For John Deere Construction & industrial models 310, 410, 455, 710, 710D, 750, 850< li>
  • Replaces John Deere OEM number RE31716, AH137687< li> < UL> (Part No: 153363)
$51.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 410, 410B, 415, 440, 440C, 448, 510, 515, 540, 548, 610, 640, 648, 710, 862< li>
  • Replaces John Deere OEM number RE16119< li>
  • Rod: 2"< li> < UL> (Part No: 152875)
$14.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 310, 350, 410, 450, 500, 544, 550, 555, 640, 644, 646, 655, 693, 740, 743, 760< li>
  • Replaces John Deere OEM number AR105355< li> < UL> (Part No: 152895)
$40.26
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 653, 690, 853< li>
  • Replaces John Deere OEM number AH144594< li> < UL> (Part No: 152914)
$174.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 230, 790< li>
  • Replaces John Deere OEM number AT154867< li> < UL> (Part No: 152944)
$99.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 200CLC, 200LC, 653E, 653G, 803M, 853M, 903K, 903M, 909K, 909M, 2054< li>
  • Replaces John Deere OEM number AH173457, AH148785< li>
  • Rod: 85 MM< li>
  • Bore: 120 MM< li> < UL> (Part No: 152956)
$145.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 490< li>
  • Replaces John Deere OEM number AT176822< li>
  • Rod: 70 MM< li>
  • Bore: 105 MM< li> < UL> (Part No: 152958)
$86.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 544< li>
  • Replaces John Deere OEM number AH137208< li> < UL> (Part No: 152978)
$75.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 440, 440C, 444, 450, 455, 540, 544, 555, 644, 670, 762, 770< li>
  • Replaces John Deere OEM number AR105346< li> < UL> (Part No: 153019)
$44.76
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 410, 415, 440, 440C, 444, 444D, 450, 510, 515, 540, 550, 610, 640, 655, 740< li>
  • Replaces John Deere OEM number RE14208, RE14523< li>
  • Rod: 2-1 4"< li>
  • Bore: 4-1 2"< li> < UL> (Part No: 153029)
$22.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 27C (ZTS)< li>
  • Replaces John Deere OEM number TH0743805< li>
  • Rod: 40 MM< li>
  • Bore: 75 MM< li> < UL> (Part No: 153033)
$47.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 120< li>
  • Replaces John Deere OEM number 4662895< li>
  • Rod: 70 MM< li>
  • Bore: 105 MM< li> < UL> (Part No: 153034)
$84.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 500B, 510< li>
  • Replaces John Deere OEM number AR105281< li>
  • Rod: 2-1 2"< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 153048)
$42.50
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 160< li>
  • Replaces John Deere OEM number AH155045< li>
  • Rod: 80 MM< li>
  • Bore: 110 MM< li> < UL> (Part No: 153082)
$194.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 440, 440C, 444, 444C, 444D, 540, 548< li>
  • Replaces John Deere OEM number RE14100< li>
  • Bore: 5-1 4"< li> < UL> (Part No: 153097)
$55.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 710< li>
  • Replaces John Deere OEM number RE14880, RE148879< li> < UL> (Part No: 153098)
$23.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 690, 693, 740, 743< li>
  • Replaces John Deere OEM number RE15905< li>
  • Bore: 5"< li> < UL> (Part No: 153099)
$65.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 690, 693< li>
  • Replaces John Deere OEM number RE21395< li>
  • Rod: 2-3 4"< li> < UL> (Part No: 153102)
$65.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 410, 410B, 415< li>
  • Replaces John Deere OEM number RE30816< li> < UL> (Part No: 153103)
$34.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 230< li>
  • Replaces John Deere OEM number 4485612< li>
  • Rod: 90 MM< li>
  • Bore: 125 MM< li> < UL> (Part No: 153106)
$57.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 120< li>
  • Replaces John Deere OEM number AH151107< li>
  • Rod: 70 MM< li>
  • Bore: 105 MM< li> < UL> (Part No: 153128)
$154.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 744< li>
  • Replaces John Deere OEM number AH151382< li>
  • Rod: 95 MM< li> < UL> (Part No: 153131)
$72.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models TC54, 524, 544< li>
  • Replaces John Deere OEM number AH163671< li>
  • Bore: 115 MM< li> < UL> (Part No: 153135)
$53.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 844, 890, 990< li>
  • Replaces John Deere OEM number RE14033< li>
  • Bore: 7-1 2"< li> < UL> (Part No: 153167)
$86.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 410, 510, 610, 710< li>
  • Replaces John Deere OEM number RE14745, RE14744< li>
  • Rod: 2-1 2"< li> < UL> (Part No: 153170)
$24.26
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 690, 693, 740, 750, 850< li>
  • Replaces John Deere OEM number RE17342< li>
  • Rod: 2-3 4"< li> < UL> (Part No: 153172)
$35.76
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 544, 624, 644, 710, 750, 850< li>
  • Replaces John Deere OEM number RE25152, AH137210< li>
  • Rod: 80 MM< li>
  • Bore: 160 MM< li> < UL> (Part No: 153173)
$92.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 555, 710, 710D< li>
  • Replaces John Deere OEM number RE28899< li>
  • Rod: 63 MM< li> < UL> (Part No: 153174)
$52.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 50ZTS< li>
  • Replaces John Deere OEM number 735309< li> < UL> (Part No: 153181)
$65.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 80< li>
  • Replaces John Deere OEM number 4464984< li>
  • Rod: 65 MM< li>
  • Bore: 115 MM< li> < UL> (Part No: 153187)
$67.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 80< li>
  • Replaces John Deere OEM number 4485615< li>
  • Rod: 95 MM< li>
  • Bore: 135 MM< li> < UL> (Part No: 153191)
$74.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 50< li>
  • Replaces John Deere OEM number 4614069, HYI40-0092< li> < UL> (Part No: 153194)
$40.26
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 35D< li>
  • Replaces OEM number 4634033< li> < UL> (Part No: 153197)
$52.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 330, 370< li>
  • Replaces John Deere OEM number 4640107< li>
  • Rod: 105 MM< li>
  • Bore: 150 MM< li> < UL> (Part No: 153200)
$260.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 230, 240, 250< li>
  • Replaces John Deere OEM number 4662069< li>
  • Rod: 90 MM< li>
  • Bore: 125 MM< li> < UL> (Part No: 153203)
$95.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 310, 315, 524, 544< li>
  • Replaces John Deere OEM number AH149847< li> < UL> (Part No: 153253)
$74.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models TC44H, 444HLL, 444J (s n 611274-earlier)< li>
  • Replaces John Deere OEM number AH163670< li> < UL> (Part No: 153262)
$38.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 624H, 624J, 624K, 624KR< li>
  • Replaces John Deere OEM number AH163672< li>
  • Bore: 125 MM< li> < UL> (Part No: 153263)
$66.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 644, 724< li>
  • Replaces John Deere OEM number AH163673< li>
  • Bore: 140 MM< li> < UL> (Part No: 153264)
$67.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 200, 210< li>
  • Replaces John Deere OEM number AH225136< li>
  • Rod: 85 MM< li>
  • Bore: 120 MM< li> < UL> (Part No: 153265)
$89.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 740< li>
  • Replaces John Deere OEM number AR105391< li>
  • Rod: 2"< li>
  • Bore: 4-1 4"< li> < UL> (Part No: 153271)
$39.26
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 500, 510< li>
  • Replaces John Deere OEM number AR105443< li>
  • Rod: 2-1 2"< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 153274)
$55.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 992< li>
  • Replaces John Deere OEM number AT132411< li>
  • Rod: 115 MM< li>
  • Bore: 170 MM< li> < UL> (Part No: 153281)
$166.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 792< li>
  • Replaces John Deere OEM number AT194457< li>
  • Rod: 100 MM< li>
  • Bore: 150 MM< li> < UL> (Part No: 153289)
$102.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 450< li>
  • Replaces John Deere OEM number AT196471< li>
  • Rod: 115 MM< li>
  • Bore: 170 MM< li> < UL> (Part No: 153290)
$186.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 330, 370< li>
  • Replaces John Deere OEM number AT264440< li>
  • Rod: 105 MM< li>
  • Bore: 150 MM< li> < UL> (Part No: 153294)
$177.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 644, 646, 750< li>
  • Replaces John Deere OEM number RE14022< li>
  • Piston: 6-1 4"< li> < UL> (Part No: 153331)
$69.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 300, 302, 350, 355, 400, 401, 444, 450, 455, 544, 550< li>
  • Replaces John Deere OEM number RE18732< li>
  • Rod: 2"< li>
  • Bore: 4"< li> < UL> (Part No: 153347)
$28.76
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 210C, 310C, 310D, 410B, 410C, 410D, 455G, 510B, 510C, 510D, 555G, 610B, 610C, 650G, 862B< li>
  • Replaces John Deere OEM number RE20595< li> < UL> (Part No: 153359)
$40.26
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 790< li>
  • Replaces John Deere OEM number TH102798< li>
  • Rod: 95 MM< li>
  • Bore: 140 MM< li> < UL> (Part No: 153367)
$105.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 70< li>
  • Replaces John Deere OEM number TH110661< li>
  • Rod: 65 MM< li>
  • Bore: 115 MM< li> < UL> (Part No: 153375)
$76.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 792, 892, 992< li>
  • Replaces John Deere OEM number TH111625< li>
  • Rod: 95 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153379)
$129.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 70< li>
  • Replaces John Deere OEM number TH111701< li>
  • Rod: 65 MM< li>
  • Bore: 115 MM< li> < UL> (Part No: 153381)
$87.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial model 438B (s n 3DJ1-later)< li>
  • Replaces OEM number AH212092< li>
  • Rod: 1-7 8"< li>
  • Bore: 3-1 4"< li> < UL> (Part No: 153553)
$21.00
Hydraulic Seal Kit - Boom Cylinder -
  • For John Deere Construction & industrial models 310, 444, 444H, 700, 850< li>
  • Replaces John Deere OEM number AH149814< li> < UL> (Part No: 153684)
$33.76
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial models 350, 400, 401, 440, 450, 500, 544, 644< li>
  • Replaces John Deere OEM number RE10640< li>
  • Rod: 2-1 4"< li>
  • Bore: 4-1 2"< li> < UL> (Part No: 152946)
$39.50
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 300 (1969-later)< li>
  • Replaces John Deere OEM number AR96532< li>
  • Rod: 1-1 2"< li>
  • Bore: 2-1 4"< li> < UL> (Part No: 152970)
$12.76
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 555< li>
  • Replaces John Deere OEM number AH139418< li> < UL> (Part No: 153072)
$30.26
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 310< li>
  • Replaces John Deere OEM number AR105403< li>
  • Rod: 1-3 4"< li>
  • Bore: 2-3 4"< li> < UL> (Part No: 153272)
$43.76
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 544< li>
  • Replaces John Deere OEM number RE13745< li> < UL> (Part No: 153330)
$20.76
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 710< li>
  • Replaces John Deere OEM number RE14771, RE30817< li>
  • Piston: 3-3 4" < li> < UL> (Part No: 153335)
$35.76
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial models 644, 646< li>
  • Replaces John Deere OEM number RE16991< li>
  • Rod: 2-3 4"< li> < UL> (Part No: 153340)
$38.00
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 655< li>
  • Replaces John Deere OEM number RE18763< li>
  • Rod: 3-3 4"< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 153355)
$49.26
Hydraulic Seal Kit - Boom Lift Cylinder -
  • For John Deere Construction & industrial model 655< li>
  • Replaces John Deere OEM number RE31528, RE15907< li>
  • Rod: 3-3 4"< li>
  • Bore: 5-1 4"< li> < UL> (Part No: 153362)
$41.26
Hydraulic Seal Kit - Bowl Lift Cylinder -
  • For John Deere Construction & industrial models 670, 672, 740, 770, 860, 862< li>
  • Replaces John Deere OEM number RE18743< li>
  • Rod: 2"< li>
  • Bore: 5"< li> < UL> (Part No: 153064)
$35.76
Hydraulic Seal Kit - Bowl Lift Cylinder -
  • For John Deere Construction & industrial model 762< li>
  • Replaces John Deere OEM number RE18737< li>
  • Rod: 2"< li>
  • Bore: 4-1 2"< li> < UL> (Part No: 153350)
$31.26
Hydraulic Seal Kit - Bucket/Crowd Cylinder -
  • For John Deere Construction & industrial models 415B, 515B< li>
  • Replaces John Deere OEM number RE11904< li> < UL> (Part No: 153557)
$41.26
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 450, 450B, 500B, 510< li>
  • Replaces John Deere OEM number AR105392< li> < UL> (Part No: 152943)
$27.50
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 310C, 410C, 410D, 510C, 510D, 610C, 710C, 710D< li>
  • Replaces John Deere OEM number AT142582< li>
  • Rod: 2"< li>
  • Bore: 3"< li> < UL> (Part No: 152957)
$24.26
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 444, 524, 544< li>
  • Replaces John Deere OEM number AH154570< li> < UL> (Part No: 152979)
$39.26
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 450, 450B, 450C, 450D, 455D, 544, 770< li>
  • Replaces John Deere OEM number RE18748< li> < UL> (Part No: 152985)
$32.50
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 350, 350B, 350C, 355D< li>
  • Replaces John Deere OEM number RE19222< li> < UL> (Part No: 152986)
$24.26
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 490, 690ELC, 790ELC< li>
  • Replaces John Deere OEM number AT176737< li>
  • Rod: 65 MM< li>
  • Bore: 95 MM< li> < UL> (Part No: 153000)
$93.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 410B, 415B, 510B, 515B, 610B< li>
  • Replaces John Deere OEM number RE14517< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 153009)
$42.50
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 310, 310A, 310B, 350, 350B, 350C, 350D, 355D, 400, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 455E, 500A, 500C, 544, 544B, 550, 550A, 550B, 555, 555A, 555B, 644< li>
  • Replaces John Deere OEM number RE18757< li> < UL> (Part No: 153011)
$38.76
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 544E, 544G, 624E, 624G, 624H, 710C, 710D, 862B< li>
  • Replaces John Deere OEM number AH137209< li> < UL> (Part No: 153016)
$82.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 690, 690A, 690B, 693B< li>
  • Replaces John Deere OEM number AR105312< li> < UL> (Part No: 153018)
$45.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 410B, 415B, 710B< li>
  • Replaces John Deere OEM number RE14516< li> < UL> (Part No: 153030)
$22.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 653, 690, 853< li>
  • Replaces John Deere OEM number AH144593< li> < UL> (Part No: 153044)
$162.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 200< li>
  • Replaces John Deere OEM number AH148776< li> < UL> (Part No: 153046)
$158.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 230< li>
  • Replaces John Deere OEM number 4485614< li>
  • Rod: 90 MM< li>
  • Bore: 130 MM< li> < UL> (Part No: 153066)
$62.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 310, 544, 710, 710D< li>
  • Replaces John Deere OEM number AH148823< li>
  • Rod: 32 MM< li> < UL> (Part No: 153074)
$23.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 330, 370< li>
  • Replaces John Deere OEM number 4640108< li>
  • Rod: 95 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153107)
$224.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 27D< li>
  • Replaces John Deere OEM number 4652138< li>
  • Rod: 35 MM< li>
  • Bore: 55 MM < li> < UL> (Part No: 153108)
$33.76
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 744< li>
  • Replaces John Deere OEM number AH151321< li>
  • Rod: 100 MM< li> < UL> (Part No: 153130)
$87.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 160, 350< li>
  • Replaces John Deere OEM number AH155040< li>
  • Rod: 75 MM< li>
  • Bore: 105 MM< li> < UL> (Part No: 153132)
$265.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 544J, 544K, 624H, 624J, 624K, 750C, 750CII, 850C, 850CII< li>
  • Replaces John Deere OEM number AH156874< li> < UL> (Part No: 153134)
$58.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 200< li>
  • Replaces John Deere OEM number AH173451< li>
  • Rod: 80 MM< li>
  • Bore: 115 MM< li> < UL> (Part No: 153137)
$155.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 744H, 744J< li>
  • Replaces John Deere OEM number AH207243< li>
  • Rod: 115 MM< li> < UL> (Part No: 153138)
$83.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 410J< li>
  • Replaces John Deere OEM number AH209022< li> < UL> (Part No: 153139)
$43.76
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 544J, 544K, 624H, 624K, 710G, 710J, 750CII, 850CII< li>
  • Replaces John Deere OEM number AH216299< li>
  • Bore: 140 MM< li> < UL> (Part No: 153140)
$76.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 544C< li>
  • Replaces John Deere OEM number AR98255< li>
  • Rod: 2-5 8"< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 153149)
$57.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 690D, 693D< li>
  • Replaces John Deere OEM number AT114836< li>
  • Rod: 80 MM< li>
  • Bore: 120 MM< li> < UL> (Part No: 153150)
$78.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 310E, 310G, 410C, 410G, 510C, 610C, 710G< li>
  • Replaces John Deere OEM number AT190898< li> < UL> (Part No: 153152)
$47.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 200DLC, 210GLC, 240DLC, 250GLC, 350DLC, 350GLC< li>
  • Replaces John Deere OEM number AT196469< li>
  • Rod: 65 MM< li>
  • Bore: 95 MM< li> < UL> (Part No: 153153)
$172.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 330, 370, 450, 892< li>
  • Replaces John Deere OEM number AT264430< li>
  • Rod: 95 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153155)
$184.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 640, 640D, 648D, 655, 655B, 690B, 690C, 690CR, 693B, 693C, 750B< li>
  • Replaces John Deere OEM number RE14102< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 153168)
$78.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 340D, 410B, 415B, 440D, 510B, 515B, 540B, 540D, 610B< li>
  • Replaces John Deere OEM number RE16076, RE14538< li> < UL> (Part No: 153171)
$41.50
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 490, 493, 495< li>
  • Replaces John Deere OEM number TH109390< li>
  • Rod: 65 MM< li>
  • Bore: 95 MM< li> < UL> (Part No: 153178)
$65.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 35 ZTS< li>
  • Replaces OEM number 744707< li> < UL> (Part No: 153183)
$67.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 80< li>
  • Replaces John Deere OEM number 4464986< li>
  • Bore: 5"< li> < UL> (Part No: 153189)
$51.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 35D< li>
  • Replaces OEM number 4614058< li>
  • Rod: 40 MM< li>
  • Bore: 65 MM< li> < UL> (Part No: 153192)
$63.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 544, 624, 644, 710, 724, 750< li>
  • Replaces John Deere OEM number AH137210< li>
  • Bore: 160 MM< li> < UL> (Part No: 153248)
$73.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 110, 120< li>
  • Replaces John Deere OEM number AH150595< li>
  • Rod: 65 MM< li>
  • Bore: 95 MM< li> < UL> (Part No: 153254)
$104.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models TC54, 544, 624, 644, 710, 724, 750, 850< li>
  • Replaces John Deere OEM number AH156466, AH212585< li> < UL> (Part No: 153257)
$26.76
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 500B, 510< li>
  • Replaces John Deere OEM number AR96526< li>
  • Rod: 2-1 2"< li>
  • Bore: 4"< li> < UL> (Part No: 153275)
$39.26
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 230, 790ELC< li>
  • Replaces John Deere OEM number AT181250< li> < UL> (Part No: 153286)
$72.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 892< li>
  • Replaces John Deere OEM number AT196473< li>
  • Rod: 95 MM< li>
  • Bore: 145 MM< li> < UL> (Part No: 153291)
$131.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 270< li>
  • Replaces John Deere OEM number AT264439< li>
  • Rod: 90 MM< li>
  • Bore: 135 MM< li> < UL> (Part No: 153293)
$166.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 690ELC< li>
  • Replaces John Deere OEM number H146479< li> < UL> (Part No: 153313)
$13.76
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 450, 450B, 450C, 450D, 450E, 510, 510B, 550, 550A, 550B, 610, 610B, 640, 640D, 655, 655B, 710, 710B, 740, 755, 755A, 755B< li>
  • Replaces John Deere OEM number RE14094< li>
  • Piston: 4-1 2"< li> < UL> (Part No: 153333)
$46.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial models 690, 690A, 690B, 690C, 693B, 693C< li>
  • Replaces John Deere OEM number RE15906< li>
  • Rod: 3-1 4"< li> < UL> (Part No: 153337)
$28.76
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 790< li>
  • Replaces John Deere OEM number TH102845< li>
  • Rod: 90 MM< li>
  • Bore: 140 MM< li> < UL> (Part No: 153369)
$94.00
Hydraulic Seal Kit - Bucket Cylinder -
  • For John Deere Construction & industrial model 70< li>
  • Replaces John Deere OEM number TH106853< li>
  • Rod: 55 MM< li>
  • Bore: 90 MM< li> < UL> (Part No: 153371)
$120.00
Hydraulic Seal Kit - Bucket Tilt Cylinder -
  • For John Deere Construction & industrial models 410B, 415B, 640, 640D, 644C< li>
  • Replaces John Deere OEM number RE30874< li> < UL> (Part No: 152942)
$16.50
Hydraulic Seal Kit - Bucket Tilt Cylinder -
  • For John Deere Construction & industrial models 444, 544B< li>
  • Replaces John Deere OEM number AR105356< li>
  • Rod: 2-1 4"< li>
  • Bore: 5-1 4"< li> < UL> (Part No: 153141)
$40.26
Hydraulic Seal Kit - Bucket Tilt Cylinder -
  • For John Deere Construction & industrial models 644C, 644D, 646C< li>
  • Replaces John Deere OEM number RE16992< li>
  • Rod: 3"< li> < UL> (Part No: 153341)
$35.76
Hydraulic Seal Kit - Crowd Cylinder -
  • For John Deere Construction & industrial models 690, 690A, 690B, 693B< li>
  • Replaces John Deere OEM number AR105313< li>
  • Rod: 3-1 4"< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 152969)
$45.00
Hydraulic Seal Kit - Crowd Cylinder -
  • For John Deere Construction & industrial models 690, 693< li>
  • Replaces John Deere OEM number RE21401< li> < UL> (Part No: 153031)
$43.76
Hydraulic Seal Kit - Dipper Cylinder -
  • For John Deere Construction & industrial models 210C, 310C< li>
  • Replaces John Deere OEM number AT101377< li>
  • Rod: 1-1 4"< li>
  • Bore: 2-1 2"< li> < UL> (Part No: 153278)
$79.00
Hydraulic Seal Kit - Dozer Cylinder -
  • For John Deere Construction & industrial model 450 (s n 64134-earlier)< li>
  • Replaces John Deere OEM number 905002< li>
  • Rod: 2-3 8"< li>
  • Bore: 2-3 8"< li> < UL> (Part No: 153554)
$15.26
Hydraulic Seal Kit - Ejector Cylinder -
  • For John Deere tractor model 5010< li>
  • Compatible with John Deere Construction & industrial model 760< li>
  • Replaces OEM number AR99785< li>
  • Rod: 1-1 2"< li>
  • Bore: 2-1 2"< li> < UL> (Part No: 153276)
$18.76
Hydraulic Seal Kit - Front Blade Cylinder -
  • For John Deere Construction & industrial models 440, 440A, 440B, 440C, 540, 540A, 760< li>
  • Replaces John Deere OEM number AR105722< li> < UL> (Part No: 153147)
$33.54
Hydraulic Seal Kit - Grapple Cylinder -
  • For John Deere Construction & industrial models 740, 850< li>
  • Replaces John Deere OEM number RE14104< li>
  • Bore: 6-1 4"< li> < UL> (Part No: 153334)
$65.00
Hydraulic Seal Kit - Hydraulic Cylinder -
  • For John Deere Construction & industrial model 710< li>
  • Replaces John Deere OEM number AH134477, 1401-1300< li> < UL> (Part No: 153246)
$58.00
Hydraulic Seal Kit - Lift Angle Cylinder -
  • For John Deere Construction & industrial models 350, 350B, 350C, 350D, 570, 570A, 570B< li>
  • Replaces John Deere OEM number AR105454< li> < UL> (Part No: 152897)
$35.76
Hydraulic Seal Kit - Lift/Angle Cylinder -
  • For John Deere Construction & industrial model 350< li>
  • Replaces John Deere OEM number AR99795< li> < UL> (Part No: 152907)
$36.90
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 340D, 440C, 440D, 448, 540B, 540D, 548D< li>
  • Replaces John Deere OEM number RE14088< li>
  • Rod: 1-1 2"< li> < UL> (Part No: 152910)
$18.76
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 450, 450B, 450C, 455D, 455E, 555, 555A, 555B< li>
  • Replaces John Deere OEM number RE18739< li>
  • Rod: 2-1 4"< li>
  • Bore: 4-1 4"< li> < UL> (Part No: 152916)
$42.50
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 570, 570A, 570B, 640< li>
  • Replaces John Deere OEM number RE10223< li> < UL> (Part No: 153062)
$28.76
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 350, 350B, 350C, 355D, 510, 844< li>
  • Replaces John Deere OEM number AR105381< li>
  • Rod: 2"< li>
  • Bore: 3-3 4"< li> < UL> (Part No: 153086)
$30.26
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 310E, 310G, 310J, 310SE, 310SG, 310SJ, 315SE, 410E, 410G, 410J, 444H, 444HLL, 444J, 444K, 524K< li>
  • Replaces John Deere OEM number AH149815, AH212103< li> < UL> (Part No: 153126)
$34.76
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 310A, 310B, 410, 500C< li>
  • Replaces John Deere OEM number AR105402< li> < UL> (Part No: 153143)
$27.50
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial model 850< li>
  • Replaces John Deere OEM number AH142440< li> < UL> (Part No: 153250)
$22.00
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 310, 310C, 310D, 444J, 650G, 710C, 710D, 750B< li>
  • Replaces John Deere OEM number AH149844, AH148164< li> < UL> (Part No: 153252)
$48.26
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 740, 750B, 850, 850B< li>
  • Replaces John Deere OEM number RE17458< li>
  • Rod: 2-1 2"< li>
  • Bore: 4-1 4"< li> < UL> (Part No: 153344)
$41.26
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial model 850< li>
  • Replaces John Deere OEM number RE18731< li>
  • Rod: 2-1 2"< li>
  • Bore: 4-1 4"< li> < UL> (Part No: 153346)
$47.00
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 743, 743A< li>
  • Replaces John Deere OEM number RE18762< li>
  • Rod: 3-1 4"< li>
  • Bore: 6-1 4"< li> < UL> (Part No: 153354)
$75.00
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 210C, 544E, 544G, 650, 650G< li>
  • Replaces John Deere OEM number RE20433, AH149842< li> < UL> (Part No: 153358)
$32.50
Hydraulic Seal Kit - Lift Cylinder -
  • For John Deere Construction & industrial models 337E, 430 (B), 435, 437D, 437E, 530B, 535, 544G, 544G LL, 544G TC, 624G, 624J, 624K, 644H, 644J, 644K, 655K, 710 (L), 710D, 710G, 710J, 710K, 724J, 724K, 750C, 750CII, 844 (L), 844 (K III), 844J, 850C, 850CII, 950K, 1050K< li>
  • Bore: 6-19 64"< li> < UL> (Part No: 167503)
$86.00
Hydraulic Seal Kit - Lift Tilt Cylinder -
  • For John Deere Construction & industrial models 644, 644B, 646, 646B, 740, 740A, 850< li>
  • Replaces John Deere OEM number RE18744< li>
  • Rod: 2-3 4"< li>
  • Bore: 6-1 4"< li> < UL> (Part No: 153010)
$80.00
Hydraulic Seal Kit - Loader Boom Cylinder -
  • For John Deere Construction & industrial models 300B, 400, 401A, 401C, 401D< li>
  • Replaces John Deere OEM number RE19220< li>
  • Rod: 1-3 4"< li>
  • Bore: 2-3 4"< li> < UL> (Part No: 153357)
$25.26
Hydraulic Seal Kit - Loader Bucket Cylinder -
  • For John Deere Construction & industrial models 300, 300B, 350 (s n 59100-later), 350B (s n 59100-later), 350C, 400, 401A, 401D, 570, 570B, 760A, 762, 762A, 762B< li>
  • Replaces John Deere OEM number RE19217< li>
  • Rod: 1-1 2"< li>
  • Bore: 2-1 2"< li> < UL> (Part No: 152933)
$27.90
Hydraulic Seal Kit - Loader Bucket Cylinder -
  • For John Deere Construction & industrial models 310C, 310D, 550, 644G< li>
  • Replaces John Deere OEM number AH149843< li>
  • Bore: 90 MM< li> < UL> (Part No: 153017)
$38.00
Hydraulic Seal Kit - Loader Bucket Cylinder -
  • For John Deere Construction & industrial models 510B, 515B, 610B, 640, 640D, 648D, 710B< li>
  • Replaces John Deere OEM number RE14567< li> < UL> (Part No: 153169)
$51.00
Hydraulic Seal Kit - Lumber Clamp Cylinder -
  • For John Deere Construction & industrial models 544D, 644, 644D, 670, 670A, 672A, 770, 772A, 772B< li>
  • Replaces John Deere OEM number RE18733< li>
  • Rod: 2"< li>
  • Bore: 4"< li> < UL> (Part No: 153348)
$30.26
Hydraulic Seal Kit - Offset Boom Cylinder -
  • For John Deere Construction & industrial models 70, 70D< li>
  • Replaces John Deere OEM number TH106874< li>
  • Rod: 60 MM< li>
  • Bore: 110 MM< li> < UL> (Part No: 153372)
$61.00
Hydraulic Seal Kit - Side Shift Cylinder -
  • For John Deere Construction & industrial models 670, 670A, 670B, 672A, 672B, 770, 770A, 770B, 772A, 772B< li>
  • Replaces John Deere OEM number RE18742< li>
  • Rod: 1-1 2"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 153352)
$43.76
Hydraulic Seal Kit - Sliding Floor Cylinder -
  • For John Deere Construction & industrial models 760, 760A< li>
  • Replaces John Deere OEM number AR105351< li>
  • Rod: 2-1 4"< li>
  • Bore: 4-1 2"< li> < UL> (Part No: 153270)
$33.76
Hydraulic Seal Kit - Stabilizer Cylinder -
  • For John Deere Construction & industrial models 300, 302, 310, 350, 400, 401, 410, 440, 444, 450, 455, 500, 544, 550, 555, 644, 670, 770< li>
  • Replaces John Deere OEM number RE18754< li>
  • Rod: 1-3 4"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 152932)
$27.00
Hydraulic Seal Kit - Stabilizer Cylinder -
  • For John Deere Construction & industrial models 300, 310, 350, 355, 400, 410, 440, 440C, 444, 444D, 450, 500, 540, 544, 646< li>
  • Replaces John Deere OEM number AR105387< li> < UL> (Part No: 152999)
$30.26
Hydraulic Seal Kit - Stabilizer Cylinder -
  • For John Deere Construction & industrial model 310< li>
  • Replaces John Deere OEM number AR96518< li> < UL> (Part No: 153020)
$36.00
Hydraulic Seal Kit - Stabilizer Cylinder -
  • For John Deere Construction & industrial models 310, 410, 500< li>
  • Replaces John Deere OEM number RE12912< li>
  • Rod: 1-3 4"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 153063)
$57.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 440C, 540< li>
  • Replaces John Deere OEM number RE19216< li>
  • Rod: 3"< li>
  • Bore: 3-1 4"< li> < UL> (Part No: 152906)
$47.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 440, 440A< li>
  • Replaces John Deere OEM number AT39022< li>
  • Rod: 2-5 8"< li>
  • Bore: 3"< li> < UL> (Part No: 152908)
$22.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 210C, 300D, 310D, 310E, 410G, 510D< li>
  • Replaces John Deere OEM number T153744< li> < UL> (Part No: 152909)
$55.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 210, 310, 315, 410, 450, 550, 644, 650, 724< li>
  • Replaces John Deere OEM number AH212091< li>
  • Bore: 80 MM< li> < UL> (Part No: 152920)
$44.90
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 340, 440, 440C, 448, 540, 548< li>
  • Replaces John Deere OEM number AR105537< li> < UL> (Part No: 152924)
$39.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 310 (s n 237998-earlier), 401, 480< li>
  • Replaces John Deere OEM number RE18749< li> < UL> (Part No: 152931)
$14.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 544< li>
  • Replaces John Deere OEM number RE19226< li> < UL> (Part No: 152934)
$23.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 644, 646< li>
  • Replaces John Deere OEM number AT34932< li>
  • Rod: 3-3 4"< li>
  • Bore: 4"< li> < UL> (Part No: 152940)
$28.76
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 444, 544, 640< li>
  • Replaces John Deere OEM number RE19227< li>
  • Rod: 3-3 8"< li>
  • Bore: 3-5 8"< li> < UL> (Part No: 152964)
$25.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 310, 644< li>
  • Replaces John Deere OEM number AHC11572< li>
  • Rod: 45 MM< li> < UL> (Part No: 152968)
$54.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 540< li>
  • Replaces John Deere OEM number AT39023< li>
  • Rod: 3"< li>
  • Bore: 3-1 4"< li> < UL> (Part No: 152971)
$24.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 310, 410, 510, 610< li>
  • Replaces John Deere OEM number RE21875< li> < UL> (Part No: 152987)
$28.76
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 740, 743< li>
  • Replaces John Deere OEM number RE19224< li> < UL> (Part No: 153012)
$31.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 410< li>
  • Replaces John Deere OEM number AH149810< li>
  • Rod: 25 MM< li> < UL> (Part No: 153047)
$27.50
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 210, 310, 450, 544, 710, 710D< li>
  • Replaces John Deere OEM number RE20428< li>
  • Bore: 70 MM< li> < UL> (Part No: 153065)
$24.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models TC54, 524, 544< li>
  • Replaces John Deere OEM number AH212087< li>
  • Bore: 63 MM< li> < UL> (Part No: 153084)
$46.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 444, 444C, 544< li>
  • Replaces John Deere OEM number AR105272< li> < UL> (Part No: 153085)
$14.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 310, 410, 510, 610< li>
  • Replaces John Deere OEM number AT108329< li> < UL> (Part No: 153087)
$27.50
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 670, 672, 770, 772< li>
  • Replaces John Deere OEM number RE18750< li>
  • Rod: 1-1 4"< li>
  • Bore: 3"< li> < UL> (Part No: 153100)
$27.50
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 410, 510, 610, 644, 670< li>
  • Replaces John Deere OEM number RE20430< li> < UL> (Part No: 153101)
$24.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models TC54, 524, 544, 624< li>
  • Replaces John Deere OEM number AH149194, AH212089, JDRBKIT161< li>
  • Rod: 40 MM< li>
  • Bore: 70 MM< li> < UL> (Part No: 153104)
$40.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 310, 410, 510, 610< li>
  • Replaces John Deere OEM number AH137789< li> < UL> (Part No: 153125)
$3.56
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 540< li>
  • Replaces John Deere OEM number AT35142< li>
  • Rod: 3"< li>
  • Bore: 3-1 4"< li> < UL> (Part No: 153156)
$49.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 310, 410, 510, 610< li>
  • Replaces John Deere OEM number RE33803< li>
  • Bore: 50 MM< li> < UL> (Part No: 153175)
$30.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models TC54, 444, 444H< li>
  • Replaces John Deere OEM number AH153496< li>
  • Rod: 32 MM< li>
  • Bore: 56 MM< li> < UL> (Part No: 153255)
$41.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models TC44, 444, 444H< li>
  • Replaces John Deere OEM number AH161589< li> < UL> (Part No: 153259)
$23.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models TC44, 444, 444H< li>
  • Replaces John Deere OEM number AH161591< li> < UL> (Part No: 153260)
$33.76
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 762, 862< li>
  • Replaces John Deere OEM number AH65915< li>
  • Rod: 1 2"< li>
  • Bore: 1"< li> < UL> (Part No: 153266)
$8.06
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 646< li>
  • Replaces John Deere OEM number AR105320< li>
  • Rod: 1-3 4"< li>
  • Bore: 3-3 4"< li> < UL> (Part No: 153269)
$19.76
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 444E< li>
  • Replaces John Deere OEM number AT121499< li>
  • Rod: 35 MM< li>
  • Bore: 65 MM< li> < UL> (Part No: 153280)
$57.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 744< li>
  • Replaces John Deere OEM number AT138119< li>
  • Rod: 50 MM< li>
  • Bore: 100 MM< li> < UL> (Part No: 153283)
$81.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 644, 646< li>
  • Replaces John Deere OEM number AT34933< li> < UL> (Part No: 153297)
$23.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 640, 648< li>
  • Replaces John Deere OEM number RE16208< li>
  • Bore: 3"< li> < UL> (Part No: 153338)
$34.76
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 644< li>
  • Replaces John Deere OEM number RE17097< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 153342)
$9.20
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 646< li>
  • Replaces John Deere OEM number RE17099< li>
  • Bore: 3-3 4"< li> < UL> (Part No: 153343)
$11.40
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 444, 444C, 444D, 544< li>
  • Replaces John Deere OEM number RE18203< li> < UL> (Part No: 153345)
$15.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 860, 862< li>
  • Replaces John Deere OEM number RE18738< li> < UL> (Part No: 153351)
$18.76
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial models 300, 302, 350, 355, 401, 444, 444C, 450, 455, 544, 550< li>
  • Replaces John Deere OEM number RE18756< li>
  • Rod: 1-3 4"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 152918)
$24.76
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial models 300, 350, 400, 450< li>
  • Replaces John Deere OEM number AR105393< li>
  • Rod: 2"< li>
  • Bore: 4"< li> < UL> (Part No: 153142)
$41.26
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial models 300, 400< li>
  • Replaces John Deere OEM number AR105412< li>
  • Rod: 1-3 4"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 153144)
$35.76
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial model 310< li>
  • Replaces John Deere OEM number AR96527< li> < UL> (Part No: 153148)
$23.26
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial model 50ZTS< li>
  • Replaces John Deere OEM number 656604< li> < UL> (Part No: 153180)
$108.00
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial model 35 ZTS< li>
  • Replaces OEM number 744808< li> < UL> (Part No: 153184)
$58.00
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial model 35D< li>
  • Replaces OEM number 4614059< li>
  • Rod: 45 MM< li>
  • Bore: 85 MM< li> < UL> (Part No: 153193)
$63.00
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial models 515, 710< li>
  • Replaces John Deere OEM number AH139417< li>
  • Rod: 2-1 4"< li> < UL> (Part No: 153249)
$22.00
Hydraulic Seal Kit - Swing Cylinder -
  • For John Deere Construction & industrial models 310, 410< li>
  • Replaces John Deere OEM number AHC11573< li>
  • Rod: 50 MM< li> < UL> (Part No: 153267)
$65.00
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial models 350, 480, 500< li>
  • Replaces John Deere OEM number AR105430< li>
  • Rod: 1-1 2"< li>
  • Bore: 2-3 4"< li> < UL> (Part No: 153145)
$27.50
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial models 300, 350, 400, 401, 450, 455, 550, 555, 570, 743< li>
  • Replaces John Deere OEM number AR105453< li> < UL> (Part No: 153146)
$36.76
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial models 310, 410, 450, 550, 700, 750, 850< li>
  • Replaces John Deere OEM number AH212097, AH149812< li> < UL> (Part No: 153179)
$23.90
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial models 450, 550< li>
  • Replaces John Deere OEM number AH134955< li>
  • Bore: 90 MM< li> < UL> (Part No: 153247)
$6.96
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial models 750, 850< li>
  • Replaces John Deere OEM number AH149817< li> < UL> (Part No: 153251)
$15.26
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial model 850< li>
  • Replaces John Deere OEM number AR105275< li>
  • Rod: 2-1 2"< li>
  • Bore: 5-1 2"< li> < UL> (Part No: 153268)
$31.26
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial model 744< li>
  • Replaces John Deere OEM number AT138137< li>
  • Rod: 100 MM< li>
  • Bore: 200 MM< li> < UL> (Part No: 153284)
$176.00
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial model 410< li>
  • Replaces John Deere OEM number AH149848< li> < UL> (Part No: 153552)
$97.00
Hydraulic Seal Kit - Tilt Cylinder -
  • For John Deere Construction & industrial model 436B< li>
  • Replaces OEM number H155543< li>
  • Rod: 2"< li>
  • Bore: 3-1 2"< li> < UL> (Part No: 153555)
$16.50
Hydraulic Seal Kit - Tilt CylinderTilt Cylinder Seal Kit -
  • For John Deere Construction & industrial models 644, 744, 824, 850< li>
  • Replaces John Deere OEM number AH137211< li>
  • Bore Only< li> < UL> (Part No: 153043)
$66.00
Hydraulic Seal Kit - Track Adjuster Cylinder -
  • For John Deere Construction & industrial models 350, 400, 440, 450, 455, 550, 555, 1010, 2010< li>
  • Replaces John Deere OEM number 905000< li>
  • Rod: 2-3 8"< li>
  • Bore: 2-3 8"< li> < UL> (Part No: 153686)
$8.06
Hydraulic Seal Kit - Track Adjuster Cylinder -
  • For John Deere Construction & industrial models 750, 850< li>
  • Replaces John Deere OEM number 905001< li>
  • Rod: 3-3 4"< li>
  • Bore: 3"< li> < UL> (Part No: 153687)
$28.76
Hydraulic Seal Kit - Track Adjuster Cylinder -
  • For John Deere Construction & industrial models 450, 455, 550, 555, 650< li>
  • Replaces John Deere OEM number 905003< li>
  • Rod: 2-3 8"< li>
  • Bore: 2-3 8"< li> < UL> (Part No: 153688)
$14.00
Hydraulic Transmission Pump -
  • For John Deere Construction & industrial models 450G, 455G, 550G, 555G, 650G< li>
  • Replaces John Deere OEM number AT159747< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 167941)
$1250.00
Lift Link Rod - 15 Long For Adjustable Lift Link For 2840, 2855, 3055, 3155, 3255 (Part No: 110317)$21.00
Lift Link Rod - 17 1 2 Long For Adjustable Lift Link For 2840, 2855, 3055, 3155, 3255 (Part No: 165768)$19.20
Lift Link Rod - 21 3 4 Long For Non-Adjustable Lift Link For 2840, 2855, 3055, 3155, 3255 (Part No: 109389)$100.00
Loader Cylinder Casting -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number SLP406< li>
  • Single Action< li> < UL> (Part No: 110988)
$102.00
Lower Lift Housing - For tractor models 2840, 2855, 3055, 3155, 3255. (Part No: 111346)$40.00
Lower Lift Housing - For 3010, 3020, 4010, 4020 (To S#200999). Repaces R26615 (Part No: R26615)		$126.00
Needle Bearing Race -
  • For John Deere tractor models 1640 (s n 430000-later), 1830, 1840, 2030, 2040 (s n 430000-later), 2040S (s n 430000-later), 2130, 2140 (s n 430000-later), 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s n 767516-earlier), 3010 (s n 049999-earlier), 3020, 3030, 3040 (s n 430000-later), 3050, 3055, 3130, 3140 (s n 430000-later), 3150, 3155, 3255, 3350, 3640, 4000 (s n 201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 300, 300A, 300B, 300D, 300GLC, 300-2, 302A, 310, 310A, 310B, 340D, 400, 400-3, 400D, 400G, 401, 401C, 401D, 410, 410B, 410C, 410D, 415B, 500, 500A (s n 152141-earlier), 500B, 510, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540D, 544, 544A, 544B, 544C, 548D, 570, 570A, 570B, 600, 610B, 610C, 640, 640D, 644A, 644B, 644C, 646, 646B, 646C, 648D, 670, 670A, 670B, 672A, 672B, 700A, 710B, 710C, 710D, 740, 740A, 743, 743A, 760A, 762, 762A, 762B, 770, 770A, 770AH, 770B, 772A, 772AH, 772B, 862, 862B< li>
  • Replaces John Deere OEM number R80558, R72509, R72506< li> < UL> (Part No: 113863)
$55.00
Pressure Relief Valve -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2150, 2155, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N, 2950, 2955 (s n 767516-earlier), 3040 (s n 430000-later), 3055, 3140 (s n 430000-later), 3150, 3155, 3255< li>
  • Replaces John Deere OEM number AL31925< li> < UL> (Part No: 160288)
$182.80
Pump Shaft - OEM part # is stamped in keyed end of shaft, used in 23cc pump, 3 & 4 cylinder engines. For tractor models JD400, 1020, 1520, 2020, (JD300 SN# up to 077953), (1120, 2120 SN# up to 22999). (Part No: 180087)		$214.20
Pump Shaft, Hydraulic - Keyed type. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2555, 2630, 2640, 2755, 2855. (Part No: 173215)		$69.00
Rockshaft - For tractor models (2520 Row Crop), (3020 SN# 123000 and up), (4000, 4020 SN# 201000 and up Row crop and Standard), 4030, 4040, 4230, 4320, 4430. (Part No: 172658)		$234.00
Rockshaft - Used on John Deere 6810, 6910, 6910S, 7210, 7405, 7410, 7500, 7510 the is a Category 3 Hydraulic Lift Shaft. It is 25.06 inches overall length with 36 teeth. Replaces R126709, R111550. (Part No: 160039)		$619.50
Rockshaft Cover Gasket - This Rockshaft Cover Gasket (Lift Cover Gasket) Fits John Deere Tractor(s) 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1040, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040 (s n 349999-earlier), 2040S, 2120, 2130, 2140, 2240 (s n 349999-earlier), 2440, 2630, 2640. Construction & Industrial: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C. Replaces L41551, L34401, T21641 (Part No: 161832)		$11.40
Rockshaft Cover Gasket Kit - Rockshaft Cover Gasket Kit (Lift Cover) includes a metal gasket. John Deere TRACTOR: 1040, 1140, 1350, 1640 (serial number 430, 000 and up), 1641, 1641F, 1750, 1840, 1850, 1950, 2040 (serial number 430, 000 and up), 2040S (serial number 430, 000 and up), 2140 (serial number 430, 000 and up), 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (before serial number 767517), 3040 (serial number 430, 000 and up), 3050, 3055, 3140 (serial number 430, 000 and up), 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, 840, 940. Replaces AL57974 (Part No: 164140)		$49.10
Rockshaft Cover Gasket Kit - Rockshaft Cover Gasket Kit (Lift Cover) includes a metal gasket. John Deere TRACTOR: 1040, 1140, 1350, 1640 (serial number 430, 000 and up), 1641, 1641F, 1750, 1840, 1850, 1950, 2040 (serial number 430, 000 and up), 2040S (serial number 430, 000 and up), 2140 (serial number 430, 000 and up), 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (before serial number 767517), 3040 (serial number 430, 000 and up), 3050, 3055, 3140 (serial number 430, 000 and up), 3141, 3150, 3155, 3255, 3350, 3351, 3640, 3641, 3650, 3651, 840, 940. Replaces AL57974 (Part No: 164140)		$49.10
Selective Control Valve - Return & pressure valve. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2955, 3020, 3055, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630. Replaces AR78396. (Part No: 116161)		$25.76
Selective Control Valve - Return & pressure valve. For tractor models 4640, 4650, 4750, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970. Replaces AR78396. (Part No: 116161)		$25.76
Selective Control Valve - For tractor models 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1635, 1640, 1750, 1830, 1850, 1950. Replaces AL26987, AL30399, AT29022. (Part No: 116872)		$385.00
Selective Control Valve - This Selective Control Valve is used on multiple John Deere Models. It replaces John Deere OEM numbers AL26989, AL30397, AT31246 (Part No: 116872)		$385.00
Stroke Control Valve Filter Element -
  • For John Deere tractor models 1830, 2030, 2130, 2350, 2440, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302, 302A, 310, 400, 401, 410, 410C, 440, 440A, 440B, 440C, 444, 500, 500B, 540, 540A, 540B, 544, 544A, 544B, 544C, 570, 570A, 600, 640, 644, 644A, 644B, 644C, 646, 646B, 670, 670A, 672, 672A, 700, 700A, 740, 760, 760A, 770, 770A, 772, 772A< li>
  • Replaces John Deere OEM number R27173< li> < UL> (Part No: 113880)
$6.40
Tilt Cylinder Packing Kit -
  • For John Deere Construction & industrial models 350, 350B, 350C, 350D< li>
  • Replaces John Deere OEM number AR99792< li> < UL> (Part No: 153277)
$22.00
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172285)		$14.26
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172338)		$14.00
Upper Lift Housing - For 2840, 2855, 3055, 3155, 3255 (Part No: 173017)$31.00
Upper Lift Housing - For tractor models 3010, 3020, 4010, 4020 (To S#200999). (Part No: 179941)		$156.00
Valve, Hydraulic Pump - For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. (Part No: 180714)		$30.26
Valve Kit, Hydraulic Pump - For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650. Replaces R48738, R83508, R48738, R49297 (Part No: 116034)		$1.00
Washer -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 7520, 8430 (74-81), 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Engine(s) 6359T, 6466A (R15), 6466A (R16), 6466A (R18), 6466A (R20), 6466A (R21), 6466D, 6466T< li>
  • Replaces John Deere OEM number AR253248< li> < UL> (Part No: 113867)
$8.46
 
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 170217)		$14.76
Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 114630)		$14.20
Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 169771)$7.86
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2 inch diameter, 8 inches overall length, 7-1 4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 173612)$195.00
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2 inch diameter, 8 inches overall length, 7-1 4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 173612)$195.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: 161111)		$116.00
Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: 180533)$23.00
Hub Assembly - Hub with bushings (3 4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1 4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 180514)		$30.80
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5 8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: 182627)		$54.00
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 182589)$51.00
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 182592)$89.69
Round Bale Tine 43 Inches - Fully Hardened. (Part No: 182594)$109.34
Round Bale Tine 49 Inches - Fully Hardened. (Part No: 152690)$83.00
Round Bale Tine 55 Inches - Fully Hardened. (Part No: 182593)$128.00
Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 180300)		$4.40
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: 107928)$16.50
 
Lawn and Garden
Belt, Platform Drive, Mower - .5 inch X 103.3 inch (2623.82) John Deere RIDING MOWER: For tractor models LA100, LA105, LA110, LA115, LA120, LA125, L100, L105, L107, L108, L110, L111, L118, L17.542, L1742, 102, 108-14.5, 108-17HS, 115, 125. Replaces GX20072 (Part No: 182549)$21.00
Belt, Traction Drive, Mower - .5 inch X 88.9 inch (2258.06) John Deere RIDING MOWER: For tractor models LA110, LA115, LA120, LA125, LA130, LA135, LA140, LA145, LA150, LA165, LA175, L105, L107, L108, L110, L111, L118, L120, L130, L17.542 (Part No: 172377)$14.76
 
Lights
12 Volt Bulb - This bulb allows you to use the AR77326 work light for 12 volt applications. (Part No: 118520)$5.76
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Part No: 111242)		$10.70
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Part No: 111242)		$10.70
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Part No: 111242)		$10.70
Bullet Tail Light-12 Volt - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 12 Volt with Glass Lense. 3 1 2 inches long. Also available in 6 volt, order part number R4384 instead. (Part No: 105310)$42.50
Dash Light - 12 Volt - For tractor models 50 up to SN# 5016122, 60 to SN# 6017060, 70 Highcrop to SN# 706327, 520 to SN# 5208099, 1010, 2010, 2510, 3010, 3020 to SN# 122999, 4010, 4020 to SN# 200999, 5010, 5020, 6030, 8020. (Part No: 105319)		$18.00
Dash Light, 12 Volt - For tractor models 40, (50 from SN# 5016123), (60 all Orchard Standard & Row Crop from SN# 6028350 and up), (70 from SN# 7006328 and up), 330, 420, 430, 435, 440, (530, 630, 730 lower dash lamp). Replaces AM1879T. (Part No: 109930)$29.99
Dash Light - 6 Volt - For JD B, BR, D, AR, R, 70D, 80. (Part No: 105318)		$25.99
Dash Light, 6 Volt - For tractor models 40, (50 from SN# 5016123), (60 all Orchard Standard & Row Crop from SN# 6028350 and up), (70 from SN# 7006328 and up), 330, 420, 430, 435, 440, (530, 630, 730 lower dash lamp). Replaces AR20432R. (Part No: 179489)$29.99
Fender Headlight, 12 Volt - Used with flat top fenders. For tractor models 520, 530, 620, 630, 720, 730. (Part No: 125671)		$57.00
Fender Headlight, 6 Volt - Use on flat top fenders. For tractor models 520, 530, 620, 630, 720, 730. (Part No: 125714)		$80.00
Flasher Control Switch - Used on John Deere, Case, International and Allis Chalmers equipment, this Flasher Control Switch replaces OEM numbers 71362888, 87271837, 131209C91, 131066C91, AR64422 (Part No: 150918)		$52.00
Front Light Bracket LH - This front left hand light bracket fits the following tractor models: 330 and 430. (Part No: 180181)		$111.00
Front Light Brack RH - For model 430 up to SN# 158074 with power steering. (Part No: 180639)$150.00
Headlight - This headlight, sold each, is for models A, AO, AR, B, D, G, H, R, 50, 60, 70. Teardrop Headlight, 12 volt, 5" Diameter. Also replaces AF3816R. (Part No: 105332)		$65.00
Headlight - For 520, 530, 620, all up to SN# #6213099. Headlight, Teardrop, 12 Volt, 5" Diameter. (R3863) (Part No: 125673)$70.00
Headlight, 12 Volt - 5 Inch Diameter Fits M, MT, 40, 320, 330, 420, 430, 440 with Independent Lens, Reflector and Bulb (not Sealed Beam). Replaces AT10571T. (Part No: 122278)		$54.99
Headlight, 12 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3144R, AD2450R, AD2451R. (Part No: 178399)		$104.00
Headlight, 6 Volt - Fits M, MT, 40, 320, 330, 420, 430, 440 with Independent Lens, Reflector and Bulb (not Sealed Beam). (Part No: 110065)		$52.00
Headlight, 6 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3145R, AD2450R, AD2451R. (Part No: 125712)		$86.99
Headlight Assembly without Bulb - Right Hand Headlight bolts to grill. For tractor models 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. Replaces S-DE13524, S-L34849, S-DE13523, S-L34897. (Part No: 114279)		$55.00
Headlight Assembly without Bulb Left Hand - Left Hand Headlight bolts to front and side of grill. Fits 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. Replaces S-DE13524, S-L34849, S-DE13523, S-L34897. (Part No: 114278)		$58.00
Headlight Bracket - For tractor models 1010, M, MC, MI, MT, 40, 320, 330, 420, 430, 435, 440. (Part No: 126561)		$45.00
Headlight Bracket - This Front Headlight Bracket is for models L Serial number 640000 and up, and LA. (Part No: 180183)		$81.00
Headlight Bulb - For Headlight DE13523 and DE13524. 45-50 Watt Bulb. Fits 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. (Part No: S4779)$5.80
Headlight Bulb - For Headlight DE13523 and DE13524. 55-60 Watt Bulb. Fits 840, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3040, 3050, 3130, 3140, 3350, 3640, 3650. (Part No: 121418)$5.36
Headlight Bulb - Used on Yanmar built John Deere models: 1050, 1250, 1450, 1650, 850, 950. This is a 12 Volt bulb is 25 watts with a PX15d Base (Part No: 179290)		$4.96
Headlight Lens - Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For tractor models A, B, D, R, 70D, 80, 820, 830. (Part No: 111330)		$13.26
Headlight Reflector - Item is interchangeable with your original and measures 4-1 2 inch measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Part No: 112482)		$11.95
Headlight Rod - For tractor models 1010, M, MC, MI, MT, 40, 320, 330, 420, 430, 435, 440. Replaces T11022T. (Part No: 179505)		$23.00
Headlight, Teardrop - Teardrop Headlight - 6 Volt - 5 inch Diameter For tractor models A, AO, AR, B, D, G, H, R, 50, 60, 70. Also replaces OEM# AF3817R. Restoration Quality. (Part No: 105331)		$47.00
Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Part No: 154899)		$4.70
Indicator Lamp Assembly - Indicates temp, charge and oil. For tractor models 850, 950, 1050. (Part No: 183919)		$38.70
Knob, Light Switch - Work or tail light knob. For tractor models A, B, D, G, R. (Part No: 126172)		$9.56
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1 2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: 127096)		$46.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1 2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: 127096)		$46.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1 2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: 127096)$46.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1 2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: 127096)		$46.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1 2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: 127096)		$46.00
Lens - Lens, combination front or rear light, for 5 inch diameter lights, for light TP-AA3075R on tractors: A, B, D, G, R, 7 0D, 7 20D, 730D, 80, 820, 830. Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R Replaces A2731R (Part No: 111330)		$13.26
Light Assembly, 12 Volt - 4.5", sealed beam, round back. For tractor models 320, 330, 420, 430, 435, 440. (Part No: 180723)		$66.00
Light Assembly, 6 Volt - 4.5", sealed beam, round back. For tractor models 320, 330, 420, 430, 435, 440. (Part No: 122280)		$58.00
Light Bracket - For tractor models 50 after SN# 5002931, 60, 60 Standard after SN# 6043000, 60 LP after SN# 6026000, 70, 720. Light Bracket. (Part No: 126503)		$42.75
Light Bracket, Headlight - For model B from SN# 201000 to 243384. Light Bracket. (Part No: 179850)		$46.00
Light Bracket, Headlight - For tractor models A after SN# 584000, B after SN# 243385. Light Bracket. (Part No: 126504)		$42.75
Light Bracket, Rear - For tractor models A from SN# 477000 to 5000011. For B from SN# 60000 to 95999. For D after SN# 143800. Rear Light Bracket. (4244R). (Part No: 180695)$90.00
Light Bracket, Rear - For A from SN# 500012 to 583999. For B from SN# 96000 to 200999. For G from SN# 13000 to 25999. Rear Light Bracket. (Part No: 179822)		$78.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Part No: 111241)		$7.90
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Part No: 111241)		$7.90
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Part No: 111241)		$7.90
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Part No: 111241)		$7.90
Light Clamp - For tractor models M, MC, MT, 40, 320, 330, 420, 430, 435, (2010 crawler), 3010, 3020, MI. (Part No: 126557)		$7.89
Light Lens - For 7 inch Teardrop Lights. For tractor models A, AO, AR, B, BO, BR, D. Replaces: B1725R (Part No: 150692)		$23.26
Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Part No: 123453)		$45.00
Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: 123454)		$15.00
Light Ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Part No: 154743)		$23.50
Light Switch - LIGHT SWITCH For 4000 (Part No: 121153)$13.26
Light Switch - 4 position, 9 terminal, .50 inch thread dia. For tractor models 2510, (2520 SN# up to 022000), (3020 SN# 068000 to 150000), 4000, (4020 SN# 91000 - 250000), (4520 early), (5010 SN# 008000 and up), 5020, (6030 without cab), (410B SN# up to 711602), 500C, 510, (510B SN# up to 711568), (610B, 710B SN# up to 711715), (600 SN# 91000 to 200999), 700A, 760A. Replaces R39551, AT21792. Knob not included. (Part No: 113307)		$25.76
Light Switch - This light switch is used on John Deere models: John Deere Tractor(s) 655, 670, 755, 756, 770, 790 (s n 790000-earlier), 855, 856, 870, 955, 970, 990, 1070. Replaces John Deere OEM nos AM876786, AM102356, AR21823 (Part No: 168378)		$24.99
Light Switch, 3-Position - For tractor models A, B, D, G, H, L, LA. Replaces AB2687R, AF687R, AL2857T. (Part No: 105312)		$26.76
Light Switch, 4 position - 6 terminal, uses knob R46092. For tractor models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Part No: 121802)		$17.76
Light Switch, 4 Position - 8 terminal, uses AT65316 knob. For tractor models (3010 diesel), (3020 diesel SN# 67999-122999), (4010 diesel), (4020 diesel SN# 65000-90000), (5010 up to SN# 4499), 8020. (Part No: 125704)$31.40
Light Switch, 5 Position - 5 terminal. For tractor models 1040, (830 3-cyl), 920, 1140, 1630, 1640, 1830, 2030, 2040, 2040S, 2240, 2440, 2630, 2640, 2840, (3030, 3130 from SN# 162948 and up), 300B, (2150, 2155, 2255, 2355, 2550, 2555, 2755, 2855, 2940, 2950 without Sound guard cab). Knob Not Included, use part number AR66799 for knob. (Part No: 125707)$33.26
Light Switch Knob - Use with AR48724 light switch. For tractor models (2520, 2750 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4030, 4230, 4320, (4520 from SN# 142450 and up), 4620, 4630, (5020 with cab). Replaces AR54445. (Part No: 126563)		$13.39
Light Switch Knob - Used with AR66478 light switch. For tractor models 1530, (830 3-cyl), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 300B. (Part No: 179293)		$19.00
Light Switch with Knob - Switch for tractor models A, B, D, G, R. Also replaces AA4982R. (Part No: 114720)		$19.69
Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)		$75.13
Rear Combo Light - For 50, 520, 530, 60, 620, 630, 70, 720, 730 - ALL GAS. 70, 720, 730, 820, 830 - ALL DIESEL WITH ELECTRIC START. 12V Rear Combo Light, 5". (3869R) (Part No: 105347)$80.90
Rear Combo Light - For 70, 720, 730, 80, 820, 830 - ALL WITH DIESEL WITH PONY MOTOR. 6V Rear Combo Light, 5". (3870R) (Part No: 105346)$62.50
Rear Combo Light 12 V - Fits A after SN 584000, [B, R (When converted to 12 volt)], G After SN 26000. Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Part No: 178256)		$90.00
Rear Combo Light, 6 Volt - Fits 40, 320, 330, 420, 430, 440. (Part No: 113256)		$56.80
Rear Light Adjusting Arm - For model M. Comes with wing nut. (Part No: 180645)		$58.00
Rear Light Housing - LH - On John Deere Models 1973 and later, this rear left fender tail light panel is used on Sound Guard Body and Open Station. Measures 11 1 2 inches long x 6 7 8 inches high x 1 5 8 inches deep. Used on John Deere 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (Part No: 121579)		$26.70
Rear Light Housing - RH - On John Deere Models 1973 and later, this rear right fender tail light panel is used on Sound Guard Body and Open Station. Measures 11 1 2 inches long x 6 7 8 inches high x 1 5 8 inches deep. Used on John Deere 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (Part No: 121580)		$26.70
Rear Light Mounting Arm - For model M. (Part No: 179472)		$41.26
Rear Light Rod Bracket - For tractor models MC, 40 Crawler, 420C, 430C. All with standard seat; no loaders. (Part No: 180697)$42.00
Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: 150646)		$19.76
Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For tractor models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Part No: 124994)		$14.50
Safety Light Amber - 12 volt amber safety light, 4-1 4 inch diameter, 3 8 inch diameter by 5 8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Part No: 122128)		$15.50
Sealed Beam Bulb - Sealed beam bulb. Used on 4030, 4230, 4430 and 4630 12-volt. 3 screw type terminals. Duel Dimmer. Replaces L4460X. For 4030, 4230, 4430, 4630 (Part No: 114014)$18.76
Sealed Beam Bulb, 4-1/2 - Combination red white, red back. For tractor models 10, 20, 30, 40 series. (Part No: 116014)$24.76
Tail Light - For A after SN# 584000, G after SN# 26000 12V Tail Light, 5". Picture shows two for clarity but price is for ONE light. (3863R) (Part No: 125673)		$70.00
Tail Light - For B after SN# 201000, R. 6 volt, 5 inch diameter Tail Light. Used in combination with the Bullet Tail Light. (3866R) Replaces: AB3549R (Part No: 125718)		$71.00
Tail Light, Bullet Shape - For B from SN# 201000 and R. Bullet Tail Light, 6 Volt, with glass lens. (R4384) Replaces: AM1310T, AB3976R, AM1291T (Part No: 105309)		$42.50
Tail Light, Combo Light - For tractor models B after SN# 201000, R. 6V Rear Combo Light, 5". Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Part No: 113257)		$87.00
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R (Part No: 150699)		$2.30
Tail Light, White - For B after SN# 201000, R. 6 volt, 5 inch diameter. Tail Light used in combination with the Bullet Tail Light. (Part No: 113257)		$87.00
Tail Light - with Bullet Tail Light - For A after SN# 584000, G after SN# 26000 12V Tail Light, 5" with Bullet Tail Light. (3864R) AA3075R, AA4529R, AB3975R, AB3976R, AB4037R (Part No: 178256)		$90.00
Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1 2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: 173803)		$52.50
Work Tail Light - 1 wire connector. For tractor models 40, 320, 420, 430. (Part No: 113256)		$56.80
Work Tail Light - 2 wire connectors. 6 Volt. For tractor models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. If you have a 12 volt application, order bulb # S.51140 for an additional cost. (Part No: 105346)		$62.50
 
Miscellaneous
Adapter Fitting -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 6010, 6020, 6110, 6110J, 6120, 6125E, 6125J, 6130J, 6205, 6210, 6215, 6220, 6310, 6320, 6405, 6410, 6415, 6420, 6505, 6510, 6515, 6520, 6605, 6610, 6615, 6620, 6715< li>
  • Replaces John Deere OEM number L115460< li> < UL> (Part No: 163081)
$108.00
Air Filter Cover, Brown -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4050, 4250, 4450, 4650, 4850< li>
  • Replaces John Deere OEM number CR50AFC< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128270)
$52.00
Arm -
  • For John Deere tractor models 1020, 1030, 1130, 1530, 1630, 1640 (s n 430000-later), 1830, 2020, 2030, 2040 (s n 430000-later), 2040 (s n 349999-earlier), 2040 (s n 350000-later), 2040S (s n 430000-later), 2130, 2140 (s n 430000-later), 2150, 2155, 2240 (s n 349999-earlier), 2240 (s n 350000-later), 2255, 2350, 2355, 2355N, 2440 (s n 340999-earlier), 2440 (s n 341000-later), 2520, 2550, 2555, 2630, 2640 (s n 340999-earlier), 2640 (s n 341000-later), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3020 (s n 123000-later), 3030, 3040 (s n 430000-later), 3055, 3130, 3140 (s n 430000-later), 3150, 3155, 3255, 4000 (s n 201000-later), 4020 (s n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 (s n 024999-earloer), 5020 (s n 025000-later), 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere OEM number R62652< li> < UL> (Part No: 117332)
$14.00
Auxiliary Hydraulic Outlet Kit (Power-Beyond) -
  • For John Deere tractor models 4030, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number AR71331, R54312< li>
  • For hose kit use Item #: 162689< li> < UL> (Part No: 125925)
$186.00
Auxiliary Outlet Hose Kit (Power-Beyond) -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number RE13724< li> < UL> (Part No: 162689)
$178.00
Bearing Cone -
  • For John Deere tractor models 70, 70 (Diesel), 1640 (sn:430000-later), 1830, 2030, 2040 (sn:430000-later), 2040S (sn:430000-later), 2130, 2140 (sn:430000-later), 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (sn:765516-earlier), 3010, 3020, 3030, 3040 (sn:430000-later), 3055, 3130, 3140 (sn:430000-later), 3150, 3155, 3255, 4000 (sn:201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 300B, 415B, 515B< li>
  • Replaces John Deere OEM number JD8192< li>
  • Replaces Timken manufacturer number 3872< li> < UL> (Part No: 113891)
$38.00
Bearing Race -
  • For John Deere tractor models 1640 (Europe, s n 429999-earlier), 1640 (s n 430000-later), 1830, 1840 (Europe, s n 429999-earlier), 2040 (Europe, s n 429999-earlier), 2040 (s n 430000-later), 2040S (Europe, s n 429999-earlier), 2040S (s n 430000-later), 2130, 2130 (Hydrostatic FWD), 2140 (Europe, s n 429999-earlier), 2140 (s n 430000-later), 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3030 (Hydrostatic FWD), 3040 (Europe, s n 429999-earlier), 3040 (s n 430000-later), 3130, 3130 (Hydrostatic FWD), 3140 (Europe, s n 429999-earlier), 3140 (s n 430000-later), 4000 (s n 201000-later), 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520< li>
  • Replaces John Deere OEM number R45874< li> < UL> (Part No: 113878)
$42.90
Brake Valve Overhaul Kit -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 ('74 - '81), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 540, 540A, 570, 570A, 600, 670, 670A, 672A, 700A, 760, 770A, 772A< li>
  • Replaces John Deere OEM number AR30687, AR31946< li> < UL> (Part No: 115353)
$34.26
Break-Away Coupler, LH, Remanufactured, AR30778 -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR30778, AR30782, R28818, R32242< li>
  • Left Hand< li> < UL> (Part No: 207117)
$540.01
Break-Away Coupler, Remanufactured, RE22586 -
  • For John Deere tractor models 1640, 2040, 2140, 2150, 2155, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2950, 2955, 3055, 3150, 3255< li>
  • Replaces John Deere OEM number RE22586< li> < UL> (Part No: 204243)
$930.01
Break-Away Coupler, RH, Remanufactured, AR30777 -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR30777, AR30781< li>
  • Right Hand< li>
  • Can be used for 2nd valve with use of adapter plate< li> < UL> (Part No: 205300)
$590.01
Bucket Arm Seal and O-Ring Kit -
  • For John Deere Construction & industrial models 160C LC, 160DLC, 160GLC, 160LC, 180CW, 180GLC, 190DW, 190GW, 200CLC, 200DLC, 200LC, 210CW, 210G, 210GLC, 220DW, 225CLC, 225DLC, 230LC, 230LCR, 230LCRD, 240DLC, 245GLC, 250GLC, 270CLC, 270DLC, 270LC, 290GLC, 300GLC, 330CLC, 330LC, 345GLC, 350DLC, 350GLC, 370, 370C, 590D, 595, 595D, 653E, 653G, 690D, 690DR, 690ELC, 693D, 753J, 790, 790ELC, 792, 792DLC, 803M, 853M, 859M, 859MH, 903M, 909K, 909M, 953K, 953M, 953MH, 959M, 959MH< li>
  • Replaces John Deere OEM number TH102446, 4089028< li>
  • Kit Includes: (2) 4089028 O rings, (2) TH102446 Seals< li> < UL> (Part No: 169629)
$42.50
Bushing -
  • For John Deere tractor models 4000 (s n 201000-later), 4020 (s n 201000-later), 4020 (s n 200999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 410B, 410C, 410D, 415B, 440, 440A, 440B, 510C, 510D, 515B, 540, 540A, 540B, 570, 570A, 570B, 600, 610B, 610C, 710B, 710C< li>
  • Replaces John Deere OEM number R34612, R79078, R67876< li> < UL> (Part No: 167311)
$13.50
Bushing, Load Control -
  • For John Deere tractor models 1020, 1530< li>
  • Compatible with John Deere Construction & industrial models 300 (s n 135288-later), 300B (a n 715670-later), 301 (s n 135288-later), 301A (a n 715670-later), 302< li>
  • Replaces John Deere OEM number R50985< li> < UL> (Part No: 170416)
$20.00
Bushing, Load Control -
  • For John Deere tractor models 4010, 4020< li>
  • Compatible with John Deere Construction & industrial models 600 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number R26502< li> < UL> (Part No: 170422)
$20.00
Bushing, Load Control -
  • For John Deere tractor models 4520, 4620, 7020 (s n 2699-earlier), 7520 (s n 1571-earlier)< li>
  • Replaces John Deere OEM number R43315< li> < UL> (Part No: 170424)
$16.50
Bushing, Load Control -
  • For John Deere tractor models 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2350 (s n 529511-earlier), 2550 (s n 529511-earlier), 2640 (s n 341000-later), 2750 (s n 529511-earlier), 2840, 2940, 2950 (s n 531761-earlier), 3030, 3040, 3120, 3130, 3140< li>
  • Compatible with John Deere Construction & industrial models 300B (s n 715671-later), 301A (s n 715671-later), 401D (s n 715671-later)< li>
  • Replaces John Deere OEM number T28548< li> < UL> (Part No: 170425)
$4.56
Bushing with O-Ring -
  • For John Deere tractor models 4000 (s n 250000-earlier), 4010, 4020 (s n 250000-earlier), 5010, 5020< li>
  • Compatible with John Deere Construction & industrial models 700A< li>
  • Replaces John Deere OEM number R45515< li>
  • Bushing is .003 oversize< li> < UL> (Part No: 176683)
$11.76
Bushing with O-Ring -
  • For John Deere tractor models 4000 (s n 250000-earlier), 4010, 4020 (s n 250000-earlier)< li>
  • Replaces John Deere OEM number R45516< li>
  • Bushing is .006 oversize< li> < UL> (Part No: 176684)
$12.02
Bushing with O-Ring -
  • For John Deere tractor models 4000 (s n 250000-earlier), 4010, 4020 (s n 250000-earlier)< li>
  • Replaces John Deere OEM number R46801< li> < UL> (Part No: 176685)
$42.29
Bushing with O-Ring -
  • For John Deere tractor models 2510, 3010, 3020, 4030< li>
  • Replaces John Deere OEM number R27018030< li>
  • Bushing Size: .030 Oversize< li> < UL> (Part No: 181603)
$31.45
Bushing With Seal Groove - Load Sensing -
  • For John Deere tractor models 840, 940, 1020, 1030, 1140, 1350, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2255, 2355< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A< li>
  • Replaces John Deere OEM number T22097< li> < UL> (Part No: 122134)
$12.00
Cab Foam - Corner Post Kit, Tan, 6000 Series -
  • For John Deere tractor models 6100, 6200, 6300, 6400, 6500< li>
  • Color: Tan< li>
  • Contains 6 pieces< li>
  • Thermoformed plastic< li>
  • Easy to clean< li>
  • Maintenance free< li> < UL> (Part No: 155819)
$309.00
Cab Foam Cowl Kit -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • Cab foam spray adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112859)
$180.00
Cab Foam Cowl Kit, Brindle Brown -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8450, 8650, 8850< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Color: Brindle Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • Cab foam spray adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112877)
$180.00
Cab Foam Cowl Kit - Brown -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255, 4055, 4255, 4455, 4555, 4755, 4955< li>
  • Color: Multi-Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • Cab foam spray adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112892)
$180.00
Cab Foam Cowl Kit - Tan -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255, 4055, 4255, 4455, 4555, 4755, 4955< li>
  • Color: Sailcloth Tan< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 150301)
$180.00
Cab Foam Fender - Cup Holder -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE221549< li>
  • Color: Brown< li>
  • Style: Cup Holder< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112911)
$255.00
Cab Foam Fender, Left-Hand, Standard -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Color: Brown< li>
  • Fender is computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112915)
$315.00
Cab Foam Fender - Passenger Seat -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE221551< li>
  • Color: Brown< li>
  • Style: Passenger Seat Late< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112914)
$255.00
Cab Foam Fender - Right Hand Console - Large Hole -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Color: Brown< li>
  • Style: Right hand Console large hole. Dimensions of hole are 6" x 6".< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112919)
$119.00
Cab Foam Fender - Right Hand Console - Small Hole -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number R221552< li>
  • Color: Brown< li>
  • Style: Right hand Console small hole. Dimension is 3" x 6".< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112918)
$119.00
Cab Foam Floor, Black -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (for use with open deck with side console)< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li> < UL> (Part No: 112930)
$110.00
Cab Foam Floor Mat -
  • For John Deere tractor models 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li> < UL> (Part No: 112856)
$147.00
Cab Foam Floor Mat, 1/2" Thick, Black -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R50761, R50762< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • 1 2" Thick durable embossed vinyl< li>
  • Beveled edges< li>
  • Easy to install< li>
  • Lays over the existing floor< li> < UL> (Part No: 109458)
$96.50
Cab Foam Floor Mat, Black -
  • For John Deere tractor models 2940, 2950, 2955 (s n 765516-earlier), 3040 (s n 430000-later), 3140 (s n 430000-later), 3150, 3155< li>
  • Replaces John Deere OEM number R74309, R67173< li>
  • Color: Black< li>
  • 1 8" Textured Rubber Top with a 1 2" Foam Bottom< li>
  • 5 8" Thick Floor Mat with Inner Sound Barrier< li>
  • Kits are computer cut to assure accuracy< li> < UL> (Part No: 112885)
$113.00
Cab Foam Floor Mat, Black -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2955, 3040, 3055, 3140, 3155, 3255 (for use with Multi-Brown or Sailcloth Tan Kits)< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Replaces John Deere OEM number L62989, L64720< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li> < UL> (Part No: 112888)
$113.00
Cab Foam Floor Mat, Black -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number R90943, R119651< li>
  • Color: Black< li>
  • 1 8" Textured Rubber Top with a 1 2" Foam Bottom< li>
  • 5 8" Thick Floor Mat with Inner Sound Barrier< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112899)
$186.00
Cab Foam Floor Mat - Hinson Cab - Black -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Factory Hinson Cab)< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li> < UL> (Part No: 112924)
$114.00
Cab Foam Floor Mat - Stopler Cab - Black -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Stopler Cab)< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112929)
$117.00
Cab Foam Floor Mat - Year-A-Round Cab - Black -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (for use with Year-A-Round Cab)< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112927)
$193.00
Cab Foam Headliner, Vinyl, Black -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840< li>
  • No cut out for radio speaker< li>
  • For Cab Foam Main Headliner Kit use Item #: 109453< li> < UL> (Part No: 176894)
$193.00
Cab Foam Kick Panel Set -
  • For John Deere tractor models 4040, 4240, 4440, 4640, 4840< li>
  • Replaces John Deere OEM number R65301, R65302< li>
  • Color: Black< li>
  • Made of ABS plastic< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112869)
$99.00
Cab Foam Kit - 8-Piece - Brown. For tractor models 2240, 2350, 2440, 2550, 2640, 2740, 2750, 2755, 2840, 2940, 2950, 2955, 3150, 3155 (Part No: 112880)		$210.00
Cab Foam Kit - 7-Piece - Black For 4030, 4230, 4430, 4630 1973-1975 with 7 Inch Seat Cavity (Part No: 112860)$176.00
Cab Foam Kit - 8-Piece - Black For 4030, 4230, 4430, 4630 1975-1977 with 11 Inch Seat Cavity. (Part No: 180734)$260.00
Cab Foam Kit - 6-Piece - Black. For tractor models 8430, 8630 4WD. (Part No: 178427)$310.00
Cab Foam Kit - 9-Piece - Black For 4040, 4240, 4440, 4640, 4840 1978-1979 (Part No: 178298)$320.00
Cab Foam Kit - 8-Piece - Black For 4040, 4240, 4440, 4640, 4840 1979-1982. (Part No: 109460)$207.00
Cab Foam Kit - 9-Piece - Brown For 4050, 4250, 4450, 4650, 4850. Add $20.00 additional for shipping due to size. This additional charge will be added to your order. (Part No: 181983)$372.80
Cab Foam Kit - 11-Piece - Brown. For tractor models 8450, 8650, 8850 4WD. (Part No: 183773)		$577.00
Cab Foam Kit - 9-Piece - Black & Brown Tweed. For tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960. (Part No: 178297)$400.00
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. This additional shipping charge will be added to your order. (Part No: 186987)		$438.47
Cab Foam Kit - 7-Piece - Black For tractor models with Hinson Cab. $15 additional shipping is requred on this kit. It will show in your total. (Part No: 112923)		$285.00
Cab Foam Kit - Brown -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number SS4212< li>
  • Brown 6 piece with can of glue included< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 165977)
$178.40
Cab Foam Kit - Corner Post - Multi-Brown / Sailcoth Tan -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Pre-formed Pieces Make Installation Easy< li>
  • Contains 4 Pieces< li>
  • 3M Foam Fast Spray Adhesive Included For Application< li> < UL> (Part No: 166229)
$120.00
Cab Foam Kit, Formed Plastic, 5 Pieces, Tan -
  • For John Deere tractor models 6100 (s n 146608-later), 6200 (s n 146608-later), 6300 (s n 146608-later), 6400 (s n 146608-later), 6500 (s n 146608-later)< li>
  • Contains 5 pieces< li>
  • Color: Tan< li>
  • Thermoformed plastic< li>
  • Easy to clean< li>
  • Maintenance free< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155825)
$482.10
Cab Foam Kit, Formed Plastic, 7 Pieces, Tan -
  • For John Deere tractor models 6100 (s n 131952-earlier), 6200 (s n 131952-earlier), 6300 (s n 131952-earlier), 6400 (s n 131952-earlier), 6500 (s n 131952-earlier)< li>
  • Contains 7 pieces< li>
  • Color: Tan< li>
  • Thermoformed plastic< li>
  • Easy to clean< li>
  • Maintenance free< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155821)
$770.01
Cab Foam Kit less Headliner, Black -
  • For John Deere tractor models 8430, 8630< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • 8 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112856< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112855)
$217.00
Cab Foam Kit less Headliner, Brindle Brown -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850< li>
  • Color: Brindle Brown< li>
  • Length: 42"< li>
  • Height: 29"< li>
  • Width: 7"< li>
  • Kits are computer cut to assure accuracy< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 109458< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 110653)
$214.00
Cab Foam Kit less Headliner, Brown -
  • For John Deere tractor models 8450, 8650, 8850< li>
  • Color: Brindle Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • 13 Pieces< li>
  • Includes 2 cans of Spray Adhesive< li>
  • For additiional Spray Adhesive use Item #: 112856< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112874)
$390.00
Cab Foam Kit less Headliner, Multi-Brown -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255< li>
  • Color: Multi-Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • 8 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For Headliner use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112887)
$208.00
Cab Foam Kit less Headliner, Multi-Brown -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Color: Multi-Brown< li>
  • Length: 42"< li>
  • Height: 29"< li>
  • Width: 7"< li>
  • Kits are computer cut to assure accuracy< li>
  • 9 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 109458< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112891)
$214.00
Cab Foam Kit less Headliner, Sailcloth Tan -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255< li>
  • Color: Sailcloth Tan< li>
  • Kits are computer cut to assure accuracy< li>
  • 8 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112888< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112890)
$210.00
Cab Foam Kit - Lower Cab -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Replaces OEM number SS20009< li>
  • Pre-formed Pieces With Plastic Backing Makes Installation Easy< li>
  • Contains 10 Pieces: LH Fender, RH Fender, LH Seat Pan, RH Seat Pan, Upper LH Rear, Upper RH Rear, Under Rear Window Rear Sill, Under Seat, 2 ROPS Fillers< li>
  • Kits Are Wrinkle-free And Repositionable For An Almost Effortless Installation< li>
  • Easily Snap Pieces Into Place< li>
  • Includes Silicone Sealant And Instructions For Easy Installation< li> < UL> (Part No: 166225)
$320.00
Cab Foam Kit, Tan -
  • For John Deere tractor models 6100 (s n 131952-146608), 6200 (s n 131952-146608), 6300 (s n 131952-146608), 6400 (s n 131952-146608), 6500 (s n 131952-146608)< li>
  • Contains 7 pieces< li>
  • Color: Tan< li>
  • Thermoformed plastic< li>
  • Easy to clean< li>
  • Maintenance free< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155823)
$757.36
Cab Foam Kit with Headliner, Black -
  • For John Deere tractor model 4620 (Using factory Hinson Cab)< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • 8 Pieces< li>
  • Includes 2 cans of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112924< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112872)
$250.00
Cab Foam Kit with Headliner, Stopler Cab, 8 Pieces, Black -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all using Stopler Cab)< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • 8 Pieces< li>
  • Includes 2 cans of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112929< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112928)
$305.00
Cab Foam Kit with Post Kit, less Headliner, Multi-Brown/Tan -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Color: Multi-Brown Sailcloth Tan< li>
  • Kits are computer cut to assure accuracy< li>
  • 11 Pieces< li>
  • Includes 2 cans of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112899< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112898)
$330.00
Cab Foam Kit with Post Pieces, Less Headliner, Multi-Brown/Sailcloth Tan -
  • For John Deere tractor models 7210, 7410, 7510, 7600, 7610, 7700, 7710, 7810< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Color: Multi-Brown Sailcloth Tan< li>
  • Includes Post pieces< li>
  • Kits are computer cut to assure accuracy< li>
  • 10 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112717< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112908)
$330.00
Cab Foam Main Headliner -
  • For John Deere tractor models 8430, 8440, 8630, 8640< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • Cab foam spray adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112857)
$260.00
Cab Foam Main Headliner -
  • For John Deere tractor models 8450, 8650, 8850< li>
  • Color: Brindle Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112875)
$295.00
Cab Foam Main Headliner, Brindle Brown -
  • For John Deere tractor models 2250, 2450, 2650, 2650N, 2850, 3050, 3350, 3640, 3650 (all using Console Comfort Cab)< li>
  • Color: Brindle Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • Includes Cab Foam Headliner Escape Hatch< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112884)
$345.00
Cab Foam Post Kit - 4 Piece-Black. For Cab Foam Spray Adhesive order part # 0140R. For tractor models 4040, 4240, 4440, 4640. (Part No: 181978)$191.92
Cab Foam Post Kit - 4-Piece - Brown For 2240, 2350, 2440, 2550, 2640, 2740, 2750, 2755, 2840, 2940, 2950, 2955, 3150, 3155 (Part No: 181981)$178.69
Cab Foam Post Kit - 4-Piece - Black For 4030, 4230, 4430, 4630 (Part No: 181979)		$183.10
Cab Foam Post Kit - 4-Piece - Black For 8430, 8630 4WD (Part No: 182085)$194.13
Cab Foam Post Kit - 4-Piece - Black For 8440, 8640 4WD (Part No: 182086)$147.00
Cab Foam Post Kit - 4-Piece - Brown For 4050, 4250, 4450, 4650, 4850 (Part No: 181982)		$191.92
Cab Foam Post Kit - 4-Piece - Brown For 8450, 8650, 8850 4WD. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 112876)		$86.00
Cab Foam Post Kit - 4-Piece - Black & Brown Tweed For 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960. $15 additional shipping is required for this kit due to the size. This will be added to the shipping total of the order. (Part No: 112886)		$75.00
Cab Foam Post Kit, Black -
  • For John Deere tractor models 8430, 8630< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • 5 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li> < UL> (Part No: 112858)
$86.00
Cab Foam Post Kit, Black -
  • For John Deere tractor models 8440, 8640< li>
  • Color: Black< li>
  • Kits are computer cut to assure accuracy< li>
  • 5 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112867)
$86.00
Cab Foam Post Kit, Black -
  • For John Deere tractor models 4030 (cab s n 185707-later), 4040 (cab s n 185707-later), 4230 (cab s n 185707-later), 4240 (cab s n 185707-later), 4430 (cab s n 185707-later), 4440 (cab s n 185707-later), 4630 (cab s n 185707-later), 4640 (cab s n 185707-later), 4840 (cab s n 185707-later)< li>
  • Color: Black< li>
  • Foam is "V" cut for a crisp fit< li>
  • Kits are computer cut to assure accuracy< li>
  • 5 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 121621)
$75.00
Cab Foam Post Kit, Brown -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850< li>
  • Replaces John Deere OEM number K64252< li>
  • Color: Brindle Brown< li>
  • Kits are computer cut to assure accuracy< li>
  • Foam is "V" cut for a crisp fit< li>
  • 5 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112879)
$75.00
Cab Foam Post Kit, Sailcloth Tan -
  • For John Deere tractor models 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Color: Sailcloth Tan< li>
  • Kits are computer cut to assure accuracy< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li> < UL> (Part No: 110632)
$75.00
Cab Foam Post Kit, Sailcloth Tan -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255< li>
  • Color: Sailcloth Tan< li>
  • Kits are computer cut to assure accuracy< li>
  • 5 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112889)
$88.00
Cab Foam Post Kit, Sailcloth Tan -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Color: Sailcloth Tan< li>
  • Foam is "V" cut for crisp fit< li>
  • Kits are computer cut to assure accuracy< li>
  • 7 Pieces< li>
  • Includes 1 can of Spray Adhesive< li>
  • For additional Spray Adhesive use Item #: 112727< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112901)
$163.00
Cab Foam - Quick Fit Post Kit, Black -
  • For John Deere tractor models 4030, 4040, 4230, 4430, 4440, 4630, 4640, 4840 (all s n 185707-earlier)< li>
  • Black vinyl < li>
  • Pre-formed pieces snaps into place for easy installation< li>
  • Kit includes 4 corner posts and silicone sealant< li> < UL> (Part No: 169754)
$195.60
Cab Foam Rear Panel -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number R151327< li>
  • Color: Brown< li>
  • Style: Rear Panel 2 slot< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112920)
$119.00
Cab Foam Rear Panel -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number R124191< li>
  • Color: Brown< li>
  • Style: Rear Panel 3 slot< li>
  • Kits are computer cut to assure accuracy< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112921)
$119.00
Cab Foam Rear Panel, Brindle Brown -
  • For John Deere tractor models 8110, 8110T, 8120, 8120T, 8210, 8210T, 8220, 8220T, 8310, 8310T, 8320, 8410, 8410T, 8420, 8420T, 8520, 8520T, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9400, 9400T, 9420, 9520< li>
  • Replaces John Deere OEM number RE168878, RE221548< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 115922)
$119.00
Cab Foam Rear Post - Left Hand - 2 Hole -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Color: Brown< li>
  • Style: Left hand 2 hole< li>
  • Kits are computer cut to assure accuracy< li>
  • Cab foam spray adhesive use Item #: 112727< li> < UL> (Part No: 112916)
$52.00
Cab Foam Rear Post - Right Hand - 4 Hole -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Color: Brown< li>
  • Style: Right hand 4 hole< li>
  • Kits are computer cut to assure accuracy< li> < UL> (Part No: 112917)
$52.00
Cab Headliner - For tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. Cab Headliner, 3 piece, Black. Replaces K64400, CHL215 (Part No: 180779)		$475.00
Cab Headliner - 3-Piece - Black. For tractor models 8430, 8440, 8630, 8640 4WD. (Part No: 182083)$475.00
Cab Headliner - 3-Piece, Brown. For tractor models 2350, 2550, 2750, 2950, 2955, 3150, 3155, 4050, 4250, 4450, 4650, 4850. ADDITIONAL $100 SHIPPING DUE TO SIZE AND WEIGHT. This additional charge will be added to your order. (Part No: 110521)		$285.00
Cab Headliner - 3-Piece - Brown. For tractor models 8450, 8650, 8850 4WD. (Part No: 178291)$475.00
Cab Kick Panel Set -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R114320, R94051, R78168, R80323< li>
  • Color: Brown< li>
  • Made of ABS plastic< li>
  • For replacement right hand use Item #: 166207< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112894)
$108.00
Cable - Control, AR54618 -
  • For John Deere tractor models 4630 (w Powershift Transmission), 4640 (w Powershift Transmission), 4840 (w Powershift Transmission)< li>
  • Replaces John Deere OEM number AR54618< li>
  • Length: 53"< li> < UL> (Part No: 162020)
$98.00
Cable - Control, RE191324 -
  • For John Deere tractor models 4040 (w Powershift Transmission), 4230 (w Powershift Transmission), 4240 (w Powershift Transmission), 4430 (w Powershift Transmission), 4440 (w Powershift Transmission), 4630 (w Powershift Transmission), 4640 (w Powershift Transmission)< li>
  • Replaces John Deere OEM number AR55700, RE191324< li>
  • Length: 45"< li> < UL> (Part No: 128475)
$95.00
Cable, Push-Pull, Selective Control Valve -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number RE70355, RE45616< li>
  • Length: 32.2"< li>
  • Travel Length: 1"< li> < UL> (Part No: 170435)
$40.50
Cable, Push-Pull, Selective Control Valve -
  • For John Deere tractor models 5220, 5225, 5320, 5325, 5325N, 5420, 5425, 5425N, 5520, 5525, 5525N< li>
  • Replaces John Deere OEM number RE179150, RE185405< li>
  • Length: 44.5"< li> < UL> (Part No: 170523)
$88.23
Cable Rockshaft Push / Pull -
  • For John Deere tractor model 2010< li>
  • Replaces John Deere OEM number AT12847, AT13231, AT12848< li>
  • Overall Length: 46"< li>
  • Housing Length: 40-1 2"< li>
  • Cable is adjustable< li> < UL> (Part No: 150124)
$179.00
Cable - Transmission Lock -
  • For John Deere tractor models 4040 (w Powershift Trans.), 4230 (w Powershift Trans.), 4240 (w Powershift Trans.), 4430 (w Powershift Trans.), 4440 (w Powershift Trans.), 4630 (w Powershift Trans.), 4640 (w Powershift Trans.), 4840 (w Powershift Trans.)< li>
  • Replaces John Deere OEM number AR78968, AR55701< li>
  • Length: 41"< li> < UL> (Part No: 161920)
$104.00
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. This additional charge will be added to your order. (Part No: B257X)		$430.31
Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)$110.28
Cap Screw - M8 x 20 -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 6010, 6020, 6110, 6110J, 6120, 6125E, 6125J, 6130J, 6205, 6210, 6215, 6220, 6310, 6320, 6405, 6410, 6415, 6420, 6505, 6510, 6515, 6520, 6605, 6610, 6615, 6620, 6715< li>
  • Replaces John Deere OEM number 19M7660< li>
  • Length: 1.09"< li>
  • Size: M8-1.25 x 20 RH< li> < UL> (Part No: 163086)
$0.90
Compressor, Air Conditioning - Replaces A6 compressor. For tractor models 4230, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430 4WD, 8440, 8630, 8640. Combine: 6600, 6620, 6622, 7700, 7720, 7722 9940. Crawler: 655B, 755B. Scraper: 762. Forage Harvester: 5200, 5400, 5440, 5460, 5720, 5820. (Part No: 172029)		$450.00
Control Link, Hydraulic -
  • For John Deere Construction & industrial models 450H, 450J, 550H, 550J, 650H, 650J, 700H, 700J< li>
  • Replaces John Deere OEM number AT221783< li>
  • Control Link for John Deere Crawler Dozers< li> < UL> (Part No: 169651)
$18.00
Control Valve Cable -
  • For John Deere tractor models 4040, 4230, 4240, 4430, 4440, 4640 (all with Powershift)< li>
  • Replaces John Deere OEM number AR55702< li>
  • 52" Total length< li> < UL> (Part No: 117582)
$107.00
Corner Post Kit -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850< li>
  • Replaces John Deere OEM number JD50CPK< li> < UL> (Part No: 165978)
$122.00
Coupler -
  • For John Deere tractor models A, B, G, M< li>
  • Replaces John Deere OEM number A3134R< li>
  • For Locking Nut Style Coupler< li>
  • 1 2" Pipe Threader< li> < UL> (Part No: 126178)
$46.76
Coupler Cover -
  • For John Deere tractor models A (late), B (late), G (late), R, 50, 60, 70< li>
  • Replaces John Deere OEM number A3255R, A3614R< li>
  • For Swing Style Couplers< li> < UL> (Part No: 110634)
$32.95
Coupler Locking Pin -
  • For John Deere Construction & industrial models TC44H, TC54H, TC62H, 444H, 444J, 544E, 544G, 544H, 544J, 624E, 624G, 624H, 624J< li>
  • Replaces John Deere OEM number T171552< li> < UL> (Part No: 164113)
$65.00
Coupler Receptacle Kit -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8560, 8570, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number RE66985, RE38130, RE57221< li> < UL> (Part No: 115324)
$29.00
Cover - Transmission / Rockshaft / Selective Control Valve -
  • For John Deere tractor models 2520, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 6030, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number R41446< li> < UL> (Part No: 167450)
$75.00
Cowl Cover, Brindle Brown -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8450, 8640, 8850< li>
  • Color: Brindle Brown< li>
  • Included Cans of Adhesive: 1< li>
  • Material: Perforated Vinyl (18%)< li> < UL> (Part No: 168832)
$76.00
Cowl Cover, Multi-Brown -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li> < UL> (Part No: 168827)
$76.00
Deck Plate Indicator Shaft -
  • For John Deere tractor models 8320RT, 8320T, 8330, 8330T, 8345R, 8345RT, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (Model Year 2006- '09), 8430T, 8520, 8520T, 8530< li>
  • Compatible with John Deere Combine(s) 9410, 9450, 9510, 9510 SH, 9550, 9550 SH, 9560, 9560 SH, 9560 STS, 9570 STS, 9600, 9610, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9870 STS< li>
  • Replaces John Deere OEM number R111692< li> < UL> (Part No: 156642)
$26.60
Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: 178876)		$196.10
Detent Ball Retainer -
  • For John Deere tractor models 2010 (s n 037872-later), 4030 (s n 011322-later), 4040, 4050, 4055, 4230 (s n 025143-later), 4240, 4250, 4255, 4430 (s n 038120-later), 4440, 4450, 4455, 4555, 4560, 4630 (s n 013317-later), 4640, 4650, 4755, 4760, 7020 (late s n), 7520 (late s n), 8430 (1974-1981), 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9420, 9420T, 9430< li>
  • Compatible with John Deere Construction & industrial models 340D, 400G, 440 (s n 37912-later), 440A (s n 37912-later), 440B (s n 37912-later), 440C, 440D, 448D, 450, 450B, 450C, 450D, 450E, 455D, 455E< li>
  • Replaces John Deere OEM number T19079< li>
  • Does not include detent ball< li>
  • Detent ball is OEM M866T< li> < UL> (Part No: 176722)
$7.01
Differential Disc -
  • For John Deere tractor models 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 5010, 5020, 6030, 7600, 7700, 7800, 8440, 8450< li>
  • Replaces John Deere OEM number RE53823< li>
  • Teeth: 47< li>
  • I.D.: 9"< li>
  • I.D.: 5-7 8"< li> < UL> (Part No: 125654)
$31.00
Electro-hydraulic Transmission Valve -
  • For John Deere tractor models 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 6120, 6220, 6320, 6320L, 6420, 6420L, 6520L, 7220, 7320, 7420, 7520, 7610 (s n 089999-earlier), 7710 (s n 089999-earlier), 7720, 7810 (s n 089999-earlier), 7820, 7920, 8110, 8110T, 8120, 8120T, 8210, 8210T, 8220, 8220T, 8310, 8310T, 8320, 8320T, 8410, 8410T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number RE177539< li> < UL> (Part No: 167648)
$286.10
EZ Cab Kit, Black Vinyl with Formed Plastic -
  • For John Deere tractor models 4040, 4240, 4440, 4640, 4840< li>
  • Color: Black< li>
  • Included Cans of Adhesive: Tube of Caulk< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168833)
$435.00
EZ Cab Kit, Black Vinyl with Formed Plastic -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840< li>
  • Color: Black< li>
  • Included Cans of Adhesive: Tube of Caulk< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168835)
$435.00
EZ Cab Kit, Black Vinyl with Formed Plastic, 7" Wide Seat Base -
  • For John Deere tractor models 4030, 4230, 4430, 4630< li>
  • Color: Black< li>
  • Included Cans of Adhesive: Tube of Caulk< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168836)
$435.00
EZ Cab Kit, Brown Vinyl with Formed Plastic -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850< li>
  • Color: Brown< li>
  • Included Cans of Adhesive: Tube of Caulk< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168831)
$435.00
Floor Mat Kit - For 30 Series. Floor Mat Kit for 2 wheel drive tractors. (Part No: 178628)$155.00
Formed Plastic Console Panel, Multi-Brown Vinyl - Right Hand -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number R132149, R221552< li>
  • Color: Multi-Brown< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168819)
$119.00
Formed Plastic Fender, Multi-Brown Vinyl - Left Hand -
  • For John Deere tractor models 6200, 6300, 6400< li>
  • Color: Multi-Brown< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168825)
$163.00
Formed Plastic Fender - Sailcloth Tan Vinyl - Left Hand -
  • For John Deere tractor models 6155J, 6215, 6320, 6415, 6420, 6615, 6715, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL161573< li>
  • Color: Sailcloth Tan< li>
  • Material: Vinyl with Formed Plastic< li> < UL> (Part No: 168821)
$111.00
Formed Plastic Post Kit, Sailcloth Tan Vinyl -
  • For John Deere tractor models 6200, 6300, 6400< li>
  • Color: Sailcloth Tan< li>
  • Material: Vinyl with Formed Plastic< li>
  • Pieces: 6< li> < UL> (Part No: 168824)
$280.00
Frame Rail - Left Hand For 4640, 4840 (Part No: R3877)$475.51
Frame Rail - Right Hand For 4640, 4840 (Part No: R3878)$475.51
Frame Rail, LH - For tractor models 4000, 4010, 4020. OEM# R2655. ADDITIONAL $20 SHIPPING DUE TO WEIGHT. This additional charge will be added to your order. (Part No: R2655-AI)$390.12
Frame Rail, LH - For tractor models 4240, 4430, 4440, 4630. OEM# R52700. (Part No: 103863)$373.90
Frame Rail, RH - For tractor models 4000, 4010, 4020. OEM# R26555. (Part No: R3874)$288.14
Frame Rail, RH - For tractor models 4240, 4430, 4440, 4630. OEM# R52699. (Part No: 103862)$327.60
Front Headliner Piece, Brindle Brown Vinyl with Plastic Back -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4050, 4250, 4450, 4650, 4850< li>
  • Color: Brindle Brown< li>
  • Material: Vinyl with Plastic Back< li> < UL> (Part No: 168830)
$147.00
Gear Shift Ball -
  • For John Deere tractor models A (s n 499000-later), B (s n 150000-later), H (s n 10000-later), 50, 60 (s n 604300-later), 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number H717R< li> < UL> (Part No: 126524)
$26.76
Gear Shift Ball -
  • For John Deere tractor models G, H (s n 999-earlier)< li>
  • Replaces John Deere OEM number F288R< li> < UL> (Part No: 126525)
$29.26
Gear Shift Ball John Deere -
  • For John Deere tractor models 420 (s n 125000-later), 430, 435, 1010< li>
  • Replaces John Deere OEM number M4337T< li> < UL> (Part No: 126526)
$22.76
Gear Shift Boot -
  • For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2120, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3350< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302 (s n 252675-later), 400, 401< li>
  • Replaces John Deere OEM number L31055< li> < UL> (Part No: 125319)
$2.70
Gear Shift Boot - Leather -
  • For John Deere tractor model H< li>
  • Replaces John Deere OEM number AH822R, H723R< li>
  • Material: Leather< li> < UL> (Part No: 169945)
$32.76
Gear Shift Latch -
  • For John Deere tractor models 2010 (s n 42001-later), 2510, 2520, 3010 (s n 049999-earlier), 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 500A, 500B, 500C, 700A< li>
  • Replaces John Deere OEM number R52882, R26188, R40148, R42128< li> < UL> (Part No: 166298)
$25.00
Gearshift Lever Bushing -
  • For John Deere tractor models 830 (3 Cyl.), 840, 920, 930, 940, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3651< li>
  • Compatible with John Deere Construction & industrial models 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315CH, 315D, 350, 350B, 350C, 350D, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 480, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C< li>
  • Replaces John Deere OEM number L4027T< li> < UL> (Part No: 161859)
$6.26
Guide -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s n 201000-later), 4010, 4020, 5010, 5020< li>
  • Compatible with John Deere Construction & industrial models 300, 400, 440, 440A, 440B, 500, 500 (Series A, s n 123113-earlier), 500A (s n 123114-152141), 540, 540A, 544, 544A, 570, 570A, 600, 644A, 700, 700A, 760< li>
  • Replaces John Deere OEM number R27157< li>
  • Guide for Four Piston Hydraulic Pump< li> < UL> (Part No: 118794)
$23.50
Guide - Hydraulic Pump -
  • For John Deere tractor models 830 (3 Cyl.), 930, 940, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640, 3030, 3120, 3130, 3135< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 301A, 302, 400, 401, 401B< li>
  • Replaces John Deere OEM number R39070< li> < UL> (Part No: 161848)
$1.00
Hammer Strap - Offset For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630 (Part No: 180088)$168.00
Hammer Strap - Straight. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630. (Part No: 109873)$73.00
Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: 180453)		$49.76
Headliner, Front Piece, Black -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840< li> < UL> (Part No: 172232)
$140.00
Headliner Kit, Brindle Brown, 3 Piece -
  • For John Deere tractor models 2350, 2550, 2750, 2950, 3150, 4050, 4250, 4450, 4650, 4850 (all 2WD)< li>
  • Replaces John Deere OEM number 4510< li>
  • Used with Spray Adhesive K80016< li>
  • 3 pieces< li>
  • Brindle Brown< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128563)
$226.00
Hydraulic Coupler -
  • For John Deere tractor models A, ANH, AO, AR, AW, B, BN, BNH, BW, BWH, G, GH, GM, GN, GW, MC (s n 36948-later), 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 1010 (s n 42000-earlier)< li>
  • Replaces John Deere OEM number A3613R, AA5535R< li>
  • Powr-Trol s n PCV67905-later< li>
  • Swing style lever coupler< li>
  • Thread: 1 2" Pipe< li> < UL> (Part No: 126179)
$44.76
Hydraulic Coupler Cartridge – ½”, Selective Control Valve Breakaway Coupler -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8300, 8310, 8310T, 8400, 8400T, 8410, 8410T, 9100, 9200, 9300, 9300T, 9400, 9400T< li>
  • Replaces John Deere OEM number RE52981< li>
  • All moving components are within the original hydraulic coupler casting< li>
  • These castings also have self-contained oil spillage, and integrated dust protection< li>
  • All casting couplings provide an emergency breakaway feature as well as allowing you to connect under residual pressure< li>
  • Pressure rating: 3000 PSI< li> < UL> (Part No: 161132)
$147.00
Hydraulic Coupler Conversion Kit -
  • For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2130, 2140, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3020, 3030, 3040, 3130, 3140, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430 (1974-1981), 8440, 8630, 8640< li>
  • Replaces John Deere OEM number RE206778, RE12121< li>
  • Converts John Deere remote couplers to ISO Pioneer style couplers< li> < UL> (Part No: 115903)
$166.00
Hydraulic Coupler Conversion Kit, Female and Male -
  • For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 2020 (USA models only), 2030 (USA models only), 2040 (USA models only), 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3010 (For Machines Equipped with Dual Block Only), 3020, 3030 (Utility), 3130, 4000, 4010 (For Machines Equipped with Dual Block Only), 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520 (72-75), 8430 (75-78), 8440< li>
  • Replaces John Deere OEM number RE12121, AR94522, RE206778< li>
  • Converts John Deere remote couplers to ISO Pioneer couplers < li>
  • Includes: Rubber Caps< li>
  • Style: Cartridge< li>
  • Style: Lever< li>
  • Body Size: 1 2"< li> < UL> (Part No: 185490)
$202.00
Hydraulic Coupler & Cover -
  • For John Deere tractor models A, ANH, AO, AR, AW, B, BN, BNH, BW, BWH, G, GH, GM, GN, GW, MC (s n 36948-later), 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 1010 (s n 42000-earlier)< li>
  • Replaces John Deere OEM number A3613R, A3614R, AA5535R< li>
  • Powr-Trol s n PCV67905-later< li>
  • Swing style lever coupler< li>
  • Thread: 1 2" Pipe< li>
  • Includes: Cover & Coupler< li> < UL> (Part No: 110633)
$79.00
Hydraulic Coupler Drive Pin -
  • For John Deere tractor models 2020, 2840, 3020, 3030 (s n 311078-earlier), 3130 (s n 311078-earlier), 4000 (s n 250001-later), 4020 (s n 250001-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 6030, 7020< li>
  • Compatible with John Deere Construction & industrial models 500, 510< li>
  • Replaces John Deere OEM number R46345< li>
  • Threads Into Engine Pulley< li>
  • Hydraulic pump coupler (2) use Item #: 111302< li> < UL> (Part No: 122100)
$6.00
Hydraulic Coupler Kit - Selective Control Valve Break-Away Couplers -
  • For John Deere tractor models 7200, 7200R, 7210, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 7400, 7410, 7510, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7820, 7830, 7920, 7930, 8120, 8120T, 8130, 8220, 8220T, 8225R, 8230, 8230T, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8310R, 8310RT, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8420, 8420T, 8430, 8430T, 8520, 8520T, 8530, 9120, 9220, 9230, 9320, 9320T, 9330, 9360R, 9410R, 9420, 9420T, 9430, 9430T, 9460R, 9460RT, 9510R, 9510RT, 9520, 9520T, 9530, 9530T, 9560R, 9620, 9620T, 9630T< li>
  • Replaces John Deere OEM number RE577560, RE186600, RE256693, RE203206, RE226728< li>
  • Contains couplers and seals< li>
  • For Coupler only use Item #: 153428< li> < UL> (Part No: 153427)
$214.00
Hydraulic Coupler Seal Kit -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610 (s n 089999-earler), 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8120, 8120T, 8220, 8220T, 8230, 8230T, 8320, 8320T, 8420, 8420T, 8520, 8520T, 9120, 9220, 9320, 9320T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number RE186600< li>
  • Made for machines with late design Selective Control Valve< li> < UL> (Part No: 169786)
$13.76
Hydraulic Elbow Fitting -
  • For John Deere tractor models 5210, 5220, 5310, 5320, 5410, 5415, 5420, 5510, 5520< li>
  • Replaces John Deere OEM number RE58597< li>
  • Replaces Carraro manufacturer number 122365< li> < UL> (Part No: 154667)
$23.26
Hydraulic Housing Center Plate -
  • For John Deere tractor model 2010< li>
  • Replaces John Deere OEM number T13805, T13791< li> < UL> (Part No: 114470)
$161.00
Hydraulic Oil Filler Cap -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 7630, 7720, 7730, 7815, 7820, 7830, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8225R, 8230, 8230T, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8300, 8300T, 8310, 8310RT, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8370RT, 8400, 8400R, 8400T, 8410, 8410T, 8420, 8420T, 8430T, 8520, 8520T, 8530, 8560, 8570, 8760, 8770, 8870, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R, 9400, 9400T, 9410R, 9420, 9420T, 9430, 9430T, 9460R, 9460RT, 9510R, 9510RT, 9520, 9520T, 9530, 9530T, 9560R, 9560RT, 9620, 9620T, 9630, 9630T< li>
  • Replaces John Deere OEM number RE28429< li> < UL> (Part No: 168377)
$12.29
Hydraulic Pump Drive Bushing -
  • For John Deere tractor models 1020, 1520, 1830, 2020, 2030, 2040, 2130, 2510, 2520, 3020, 3030, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 7020, 7520, 8430, 8440, 8630, 8640< li>
  • Compatible with John Deere Combine(s) 2240, 9400< li>
  • Compatible with John Deere Harvester(s) 9940< li>
  • Replaces John Deere OEM number AR49427, R45822, AR34098< li>
  • For Set of 4 use Item #: 111302< li> < UL> (Part No: 108934)
$1.50
Hydraulic Pump Drive Shaft Coupler -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number R27487< li>
  • Length: 4.62"< li>
  • Splines: 14< li> < UL> (Part No: 121447)
$147.00
Hydraulic Pump Drive Shaft Coupler -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number R61070< li>
  • Length: 11.19"< li>
  • Splines: 14< li> < UL> (Part No: 121448)
$178.00
Hydraulic Pump Seal Drain Kit -
  • For John Deere tractor models 3010, 4010, 5010< li>
  • Replaces John Deere OEM number R39810, R94658, R94659< li>
  • Kit is required when ordering OEM # R94658 and R94659 hydraulic pumps for tractors that have not been updated< li> < UL> (Part No: 177030)
$267.00
Hydraulic Pump Shaft 2.4 -
  • For John Deere tractor models 1640 (Europe, s n 429999-earlier), 1640 (s n 430000-later), 1830, 1840 (Europe, s n 429999-earlier), 2030, 2040 (Europe, s n 429999-earlier), 2040 (s n 430000-later), 2040S (Europe, s n 429999-earlier), 2040S (s n 430000-later), 2130, 2140 (Europe, s n 429999-earlier), 2140 (s n 430000-later), 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040 (Europe, s n 429999-earlier), 3040 (s n 430000-later), 3130, 3140 (Europe, s n 429999-earlier), 3140 (s n 430000-later), 4010, 4030, 5010< li>
  • Replaces John Deere OEM number R39843< li>
  • 14 Spline< li>
  • Used in 39CC (2.4 Cubic Inch) pump< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 117724)
$70.00
Hydraulic Rockshaft Lift Arm - Left Hand -
  • For John Deere tractor models 7210, 7410, 7510< li>
  • Replaces John Deere OEM number R111546< li>
  • Fits left hand side< li> < UL> (Part No: 156265)
$189.00
Hydraulic Rockshaft Lift Arm - Right Hand -
  • For John Deere tractor models 7210, 7410, 7510< li>
  • Replaces John Deere OEM number R111547< li>
  • Fits right hand side< li> < UL> (Part No: 156266)
$195.00
Hydraulic Seal Kit - Boom, Steering, Crowd, Bucket Cylinder -
  • For John Deere tractor models 8100, 8200, 8300, 8400, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9200, 9300, 9400< li>
  • Compatible with John Deere Harvester(s) 7445, 7450, 9930, 9965< li>
  • Compatible with John Deere Construction & industrial models 210, 310, 315, 415, 515< li>
  • Replaces John Deere OEM number RE20434< li>
  • Rod: 2-1 8"< li>
  • Bore: 4"< li> < UL> (Part No: 153558)
$33.76
Hydraulic Support - Left Hand -
  • For John Deere tractor models 4520, 4620< li>
  • Replaces John Deere OEM number R46918< li>
  • Fits Left Hand Side< li> < UL> (Part No: 165837)
$0.10
ISO Remote Break-Away Coupler, Remanufactured, R34396 -
  • For John Deere tractor models 2510, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier), 5010, 5020, 7020, 7520< li>
  • Replaces John Deere OEM number R34396< li>
  • With ISO Couplers< li> < UL> (Part No: 205375)
$550.01
Kick Panel, Black - Left Hand -
  • For John Deere tractor models 4030, 4230, 4430, 4630< li>
  • Replaces John Deere OEM number R52707< li>
  • Fits Left Hand Side< li>
  • For right hand use Item #: 112863< li> < UL> (Part No: 165973)
$55.40
Kick Panel, Black - Right Hand -
  • For John Deere tractor models 4030, 4230, 4430, 4630< li>
  • Replaces John Deere OEM number R52706< li>
  • Fits Right Hand Side< li>
  • For left hand use Item #: 112863< li> < UL> (Part No: 165972)
$51.20
Kick Panel, Brown - LH -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R78168, R114320< li>
  • Fits Left Hand Side< li>
  • For kick panel set use Item #: 166211< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 166207)
$87.00
Kick Panel - Brown - RH -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R80323, R94051< li>
  • Brown< li>
  • For kick panel set use Item #: 166207< li> < UL> (Part No: 166211)
$87.00
Kick Panel Set - Black -
  • For John Deere tractor models 4030, 4230, 4430, 4630< li>
  • Replaces John Deere OEM number R52706 (RIGHT CAB PANEL), R52707 (LEFT CAB PANEL)< li>
  • Color: Black< li>
  • Made of ABS plastic< li>
  • For replacement right hand use Item #: 165973< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112863)
$98.00
Knee Extension - With Bushings - 18 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Part No: 109374)$240.00
Knee Extension - With Bushings - 24 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Part No: 108910)$309.20
Lever & Linkage Kit -
  • For John Deere tractor models 2510, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier), 5010, 5020 (s n 024999-earlier)< li>
  • For 2nd Valve< li> < UL> (Part No: 121333)
$168.00
Lever & Linkage Kit -
  • For John Deere tractor models 4030, 4230, 4430, 4630< li>
  • For 2nd Valve< li> < UL> (Part No: 121336)
$600.00
Lever & Linkage Kit -
  • For John Deere tractor models 4030, 4230, 4430, 4630< li>
  • For 3rd Valve< li> < UL> (Part No: 121337)
$710.00
Lever & Linkage Kit -
  • For John Deere tractor models 4520, 4620< li>
  • For 2nd Valve< li> < UL> (Part No: 121338)
$290.00
Lever & Linkage Kit -
  • For John Deere tractor models 4520, 4620< li>
  • For 3rd Valve< li> < UL> (Part No: 121339)
$285.00
Lever & Linkage Kit -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • For 2nd Valve< li> < UL> (Part No: 121340)
$285.00
Lever & Linkage Kit -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • For 3rd Valve< li> < UL> (Part No: 121341)
$770.00
Lever & Linkage Kit -
  • For John Deere tractor models 4640, 4840< li>
  • For 2nd Valve< li> < UL> (Part No: 121342)
$345.00
Lever & Linkage Kit -
  • For John Deere tractor models 4640, 4840< li>
  • For 3rd Valve< li> < UL> (Part No: 121343)
$810.00
Lever & Linkage Kit -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • For 3rd Valve< li> < UL> (Part No: 121344)
$830.00
Lever & Linkage Kit - 2nd Valve -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320< li>
  • For 2nd Valve< li> < UL> (Part No: 121334)
$325.00
Lever & Linkage Kit - 3rd Valve -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320< li>
  • For 3rd Valve< li> < UL> (Part No: 121335)
$305.00
Lift Cylinder Pin -
  • For John Deere tractor models 7200R (s n 080000-earlier), 7210R (s n 080001-later), 7215R (s n 080000-earlier), 7230R, 7250R (s n 080001-later), 7260R (s n 080000-earlier), 7270R (s n 080001-later), 7280R (s n 080000-earlier), 7290R (s n 080001-later), 7310R (s n 080001-later), 8130, 8225R (s n 000101-053099, 120000-later), 8230, 8230T, 8235R (s n 016001-090000), 8245R (s n 000101-053099, 090001-later), 8260R (s n 016001-090000), 8270R (s n 000101-053099, 090001-later), 8285R (s n 016001-090000), 8295R (s n 000101-053099, 090001-later), 8295RT (s n 900101-907100), 8310R (s n 016001-090000), 8310RT (s n 902501-912000), 8320R (s n 000101-053099, 090001-later), 8320RT (s n 900101-907100), 8320RT (s n 900101-907100, 912001-later), 8330, 8330T, 8335R (s n 016001-later), 8335RT (s n 902501-912000), 8345R (s n 000101-053099, 090001-later), 8345RT (s n 900101-907100, 912001-later), 8360R (s n 016001-090000), 8360RT (s n 902501-912000), 8370R (s n 090001-later), 8370RT (s n 912001-later), 8430, 8430T, 8530< li>
  • Replaces John Deere OEM number R270869< li>
  • Length: 5.591"< li>
  • Outside Diameter: 1.572"< li>
  • Thread Size: .630"< li> < UL> (Part No: 168589)
$44.89
Lift Link - Structural Tube -
  • For John Deere tractor models 6800 (s n 182918-430356, Europe Edition), 6810 (s n 182918-430356, Europe Edition), 6820 (s n 182918-430356, Europe Edition), 6900 (s n 182918-430356, Europe Edition), 6910 (s n 182918-430356, Europe Edition), 6910S (s n 182918-430356, Europe Edition), 6920 (s n 182918-430356, Europe Edition), 6920S (s n 182918-430356, Europe Edition)< li>
  • Replaces John Deere OEM number AL117221, AL158813< li> < UL> (Part No: 168877)
$84.00
Lift Shaft Seal -
  • For John Deere tractor models 830, 930, 1030, 1130, 1630< li>
  • Replaces John Deere OEM number L61504< li> < UL> (Part No: 156434)
$5.76
Load Control Bushing -
  • For John Deere tractor models 1020, 1520 (s n 178601 - 179600), 1530 (s n 178601 - 179600), 2010, 2020, 2030, 2440< li>
  • Compatible with John Deere Construction & industrial models 400, 401 (s n 134706-later), 401B, 401C, 401D (s n 715640-earlier)< li>
  • Replaces John Deere OEM number R47061< li>
  • Outer Bushing< li> < UL> (Part No: 113994)
$13.26
Load Control Bushing -
  • For John Deere tractor models 4520, 4620, 4630, 7020, 7520< li>
  • Replaces John Deere OEM number R43316< li>
  • 1.332" I.D.< li>
  • 1.736" O.D.< li> < UL> (Part No: 151993)
$25.26
Load Control Shaft -
  • For John Deere tractor models 4000 (s n 250000-earlier), 4010, 4020 (s n 250000-earlier)< li>
  • Replaces John Deere OEM number R33826< li>
  • 21.62" Long< li>
  • 1.124" Diameter< li> < UL> (Part No: 111936)
$93.80
Load Control Shaft -
  • For John Deere tractor models 4630, 7020 (s n 2700 - later), 7520 (s n 1572 - later)< li>
  • Replaces John Deere OEM number R52185< li>
  • 20" Long< li>
  • 1.3" Diameter< li> < UL> (Part No: 117940)
$92.00
Load Control Shaft -
  • For John Deere tractor models 4040S, 4050, 4055, 4240S, 4250, 4255, 4350, 4450, 4455< li>
  • Replaces John Deere OEM number R71375< li>
  • Length: 24.250"< li>
  • Diameter: 1.186"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 123288)
$113.00
Load Control Shaft -
  • For John Deere tractor models 2040 (with High Lift), 2140 (with High Lift), 2650 (with High Lift), 2850 (with High Lift), 2955 (with High Lift), 3040 (with High Lift), 3050 (with High Lift), 3055 (with High Lift), 3140 (with High Lift), 3150, 3155 (with High Lift), 3255 (with High Lift), 3350 (with High Lift), 3640, 3650< li>
  • Replaces John Deere OEM number L41197< li>
  • 25.25" Long< li>
  • 1.102" Diameter< li> < UL> (Part No: 152047)
$135.00
Load Control Shaft -
  • For John Deere tractor models 301, 1350, 1550, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N< li>
  • Compatible with John Deere Construction & industrial models 300B, 301A, 401D< li>
  • Replaces John Deere OEM number L41787< li> < UL> (Part No: 155106)
$85.00
Load Control Shaft -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2650, 2650N, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3055, 3130, 3140, 3255< li>
  • Replaces John Deere OEM number L41819< li> < UL> (Part No: 160351)
$87.40
Load Control Shaft -
  • For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2350, 2550, 2640, 2750< li>
  • Replaces John Deere OEM number L31199< li> < UL> (Part No: 160352)
$74.00
Load Control Shaft -
  • For John Deere tractor models 1520, 1530, 2020, 2030, 2120, 2440< li>
  • Compatible with John Deere Construction & industrial models 400, 401 (s n 134706-later), 401B (s n 715670-earlier), 401C, 401D (s n 715640-earlier)< li>
  • Replaces John Deere OEM number L26937, T22651, T26599< li>
  • Length: 19.460"< li>
  • Diameter: .877"< li> < UL> (Part No: 164385)
$98.00
Load Control Shaft -
  • For John Deere tractor models 2630, 2640< li>
  • Replaces John Deere OEM number R54217< li>
  • Diameter: .930"< li>
  • Length: 19.440"< li> < UL> (Part No: 164412)
$198.00
Load Control Shaft -
  • For John Deere tractor models 4520, 4620, 7020 (s n 2699-earlier), 7520 (s n 1571-earlier)< li>
  • Replaces John Deere OEM number R43318< li>
  • Length: 20.06"< li>
  • Diameter: 1.30"< li> < UL> (Part No: 176698)
$239.00
Load Control Shaft Bushing -
  • For John Deere tractor models 4620, 4630, 7020 (s n 2670 - later), 7520 (s n 1572 - later)< li>
  • Replaces John Deere OEM number AR56769, AR85460< li>
  • With O-Ring< li> < UL> (Part No: 117935)
$70.50
Load Control Shaft Bushing -
  • For John Deere tractor models 4000 (s n 250000 - earlier), 4010, 4020 (s n 250000 - earlier), 5010, 5020< li>
  • Replaces John Deere OEM number R26505< li>
  • 1.565" O.D.< li>
  • Includes o-ring A3606R< li> < UL> (Part No: 118282)
$15.76
Load Control Shaft Bushing & O-Rings -
  • For John Deere tractor models 4000 (s n 250001-later), 4020 (s n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6030 (s n 33766-later)< li>
  • Replaces John Deere OEM number AR54481< li>
  • Includes R53177 Back-up Ring & R53180 O-Ring< li>
  • Sold individually< li>
  • For Load control shaft use Item #: 112006< li> < UL> (Part No: 128537)
$34.73
Load Control Shaft Bushing with O-Ring -
  • For John Deere tractor models 4000 (s n 250001-later), 4020, 4040, 4230, 4240, 4320, 4430, 4440< li>
  • Replaces John Deere OEM number R54785< li>
  • OS: .020"< li> < UL> (Part No: 176696)
$23.51
Load Control Shaft Kit -
  • For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2350, 2550, 2750< li>
  • Replaces John Deere OEM number AL40976< li>
  • Kit Contains: (1) shaft, (2) bushings, (2) sealing washers, (4) washers, (2) bushing, (2) pins, and (2) clamps< li> < UL> (Part No: 155075)
$114.00
Load Control Shaft Kit -
  • For John Deere tractor models 2840, 2940, 2950, 3030, 3040, 3130, 3140< li>
  • Replaces John Deere OEM number AL40978, L33903< li>
  • Kit Contains: (1) Shaft, (2) Bushings, (2) Sealing Rings, (4) Washers, and (2) Bushings.< li> < UL> (Part No: 164292)
$181.70
Load Control Shaft Retainer -
  • For John Deere tractor models 2510, 3010 (s n 049999-earlier), 3020 (s n 122999-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500, 500A< li>
  • Replaces John Deere OEM number R33884, R28125< li> < UL> (Part No: 167359)
$20.50
Load Control Shaft Retainer -
  • For John Deere tractor models 4010, 4010 (s n 200999-earlier), 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 600 (s n 200999-earlier), 700A< li>
  • Replaces John Deere OEM number R33827, R27828< li> < UL> (Part No: 173859)
$23.40
Load Control Shaft Seal -
  • For John Deere tractor models 4000 (s n 250000 - earlier), 4010, 4020< li>
  • Replaces John Deere OEM number AR84792< li>
  • Sold individually< li> < UL> (Part No: 118283)
$5.60
Load Control Shaft Seal -
  • For John Deere tractor models 4040, 4040S, 4050, 4055, 4240, 4240S, 4250, 4255, 4350, 4450, 4455< li>
  • Replaces John Deere OEM number R79779, R78733< li>
  • Sold Individually< li> < UL> (Part No: 123289)
$2.66
Load Control Shaft Washer -
  • For John Deere tractor models 4630, 7020 (s n 2700 - later), 7520 (s n 1572 - later)< li>
  • Replaces John Deere OEM number R52184< li> < UL> (Part No: 117937)
$6.50
Load Control Shims -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4030< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500C< li>
  • Replaces John Deere OEM number R66425< li> < UL> (Part No: 140546)
$15.50
Load Control Washer -
  • For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1850N, 2030, 2040, 2040S (s n 429999-earlier), 2130, 2140, 2155, 2350, 2355, 2355N, 2550, 2555, 2640 (s n 341000-later), 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere OEM number L41154< li> < UL> (Part No: 165796)
$1.26
Loader Bucket Tilt Cylinder Seal Kit -
  • For John Deere Construction & industrial models 310A, 310B, 410, 500C< li>
  • Replaces John Deere OEM number AR105429< li> < UL> (Part No: 158417)
$26.26
Load Sensing Bushing with O-Ring -
  • For John Deere tractor models 1350 (s n 651780-later), 1550 (s n 651780-later), 1640, 1750 (s n 651780-later), 1840, 1850 (s n 651780-later), 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2350 (s n 529512-later), 2355, 2355N, 2450, 2550 (s n 529512-later), 2555, 2640, 2650, 2650N, 2750 (s n 529512-later), 2755, 2840, 2850, 2855, 2855N, 2940, 2950 (s n 531762-later), 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3640, 3650< li>
  • Compatible with John Deere Construction & industrial models 300B, 410B, 410D< li>
  • Replaces John Deere OEM number L41196< li> < UL> (Part No: 166247)
$13.50
Load Sensing Shaft Bushing Support -
  • For John Deere tractor models 4050, 4055, 4250, 4255< li>
  • Replaces John Deere OEM number AR103729< li> < UL> (Part No: 115433)
$160.00
Load Sensing Shaft Bushing Support -
  • For John Deere tractor models 4040S, 4240S, 4350, 4450, 4455< li>
  • Replaces John Deere OEM number AR104003< li> < UL> (Part No: 176333)
$179.00
Manifold with Bushing - Transmission Clutch Oil -
  • For John Deere tractor models 4240, 4430, 4440 (all powershift)< li>
  • Compatible with John Deere Construction & industrial models 670, 672< li>
  • Replaces John Deere OEM number AR90457< li> < UL> (Part No: 128185)
$550.00
Multi Brown Cowl Cover -
  • For John Deere tractor models 2155, 2355, 2555, 2755, 2955, 3155, 3255, 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Replaces John Deere OEM number JD55CC< li> < UL> (Part No: 165959)
$194.00
Needle Bearing -
  • For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number JD9858, T400012, T40012< li> < UL> (Part No: 118796)
$14.50
O-Ring -
  • For John Deere tractor models 1010, 2010, 2510, 2520, 2530, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8230T, 8300T, 8310T, 8320T, 8330T, 8400T, 8410T, 8420T, 8430, 8430T, 8440, 8450, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8960, 8970< li>
  • Replaces John Deere OEM number A3606R, 2216BN70< li>
  • I.D.: 1.109"< li>
  • Nominal Section: .139"< li>
  • Durometer: 75< li> < UL> (Part No: 153493)
$0.90
O-Ring -
  • For John Deere tractor models 1640, 1840, 2030, 2040, 2040S, 2140, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 3040, 3140, 4000, 4010, 4020, 4030, 4040, 4040S, 4050, 4055, 4120, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4720, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 5105, 5200, 5205, 5210, 5215, 5220, 5300, 5310, 5310N, 5315, 5320, 5320N, 5325, 5400, 5400N, 5410, 5415, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5515, 5520, 5520N, 5525, 5525N, 5600, 5605, 5615, 5700, 5705, 5715, 5725, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302, 302A, 310, 310A, 310B, 340, 340D, 344, 350, 350B, 350C, 350D, 355, 355D, 380, 400, 401, 401A, 401C, 401D, 410, 410B, 415, 415B, 440, 440A, 440B, 440C, 440D, 444, 444C, 450, 450B, 450C, 450D, 480, 480A, 480B, 500, 500A, 500C, 510, 510B, 515, 515B, 540, 540A, 540B, 540D, 544, 544A, 544B, 544C, 550, 550A, 570, 570A, 570B, 608, 608B, 608L, 608S, 610, 610B, 640, 640D, 644, 644A, 644B, 644C, 646, 646B, 646C, 650, 670, 670A, 670B, 672, 672A, 672B, 690, 690A, 690B, 690C, 693, 693B, 700, 710, 710B, 710C, 740, 740A, 743, 743A, 750, 755, 755D, 760, 762, 762A, 770, 770A, 770B, 772, 772A, 772B, 860, 860A, 862, 950< li>
  • Replaces John Deere OEM number P47908< li> < UL> (Part No: 154286)
$11.96
O-Ring -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 6010, 6020, 6110, 6110J, 6120, 6125E, 6125J, 6130J, 6205, 6210, 6215, 6220, 6310, 6320, 6405, 6410, 6415, 6420, 6505, 6510, 6515, 6520, 6605, 6610, 6615, 6620, 6715< li>
  • Replaces John Deere OEM number L34995< li>
  • I.D: 1.220"< li>
  • Thickness: .098"< li>
  • Duromter 70< li> < UL> (Part No: 163084)
$1.50
O-Ring -
  • For John Deere tractor models 655, 755, 756, 850, 855, 856, 950, 4010< li>
  • Compatible with John Deere Construction & industrial models 17D, 50, 50ZTS, 60G, 70, 70D, 75D, 75G, 80, 110, 120, 120C, 120D, 135D, 135G, 160C LC, 160DLC, 160LC, 180CW, 190DW, 190E, 200CLC, 200DLC, 200LC, 210CW, 220DW, 225DLC, 230CLC, 230LC, 240DLC, 244E, 244H, 245GLC, 270DLC, 270LC, 290D, 330CLC, 330LC, 330LCR, 344E, 344G, 370, 370C, 415, 444E, 444G, 450CLC, 450DLC, 450LC, 490, 490D, 490E, 493D, 495D, 550LC, 590D, 595, 595D, 600C LC, 650DLC, 670GLC, 690ELC, 744E, 750, 790, 790D, 790ELC, 792, 800C, 850DLC, 870GLC, 892ELC, 992ELC, 2054, 2554, 3554< li>
  • Replaces John Deere OEM number AT264324< li> < UL> (Part No: 163698)
$2.56
O-Ring, Load Control Shaft -
  • For John Deere tractor models 4620, 4630, 7020, 7520< li>
  • Replaces John Deere OEM number R53198< li> < UL> (Part No: 117936)
$1.46
Outer Load Control Bushing -
  • For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2255, 2355< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A< li>
  • Replaces John Deere OEM number T22099< li> < UL> (Part No: 122136)
$6.50
Outer Load Control Bushing -
  • For John Deere tractor models 1520 (s n 178601-179600), 1530 (s n 178601-179600), 2020, 2030, 2120, 2440< li>
  • Compatible with John Deere Construction & industrial models 400, 401, 401B, 401D (s n 715640-earlier)< li>
  • Replaces John Deere OEM number T22096, L26939< li> < UL> (Part No: 176714)
$9.76
Pinon Gear Pin -
  • For John Deere tractor models 3020 (s n 122999 - earlier), 4020 (s n 200999 - earlier)< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 6620, 6620 SH, 6622, 7720, 7722, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9501, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9650, 9650 STS, 9750 STS< li>
  • Replaces John Deere OEM number R33079< li> < UL> (Part No: 109728)
$21.50
Piston -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970< li>
  • Compatible with John Deere Construction & industrial models 410C, 410D, 510C, 510D, 610C, 640D, 648D, 710B, 710C, 710D< li>
  • Replaces John Deere OEM number R80661< li> < UL> (Part No: 126844)
$39.00
Power Shift Transmission Clutch Spring Kit -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7800, 7810 (s n 089999-earlier), 7810 (s n 090000-later)< li>
  • Replaces John Deere OEM number RE47319< li> < UL> (Part No: 117249)
$95.00
Power Trol Lever -
  • For John Deere tractor models A (sn:477000-later), AO (sn:272000-later (Styled), AR (sn:272000-later (Styled), B (sn:B60000-later), BN (sn:B60000-later), BNH (sn:B60000-later), BW (sn:B60000-later), BWH (sn:B60000-later), G, GN, GW< li>
  • Replaces John Deere OEM number AA3744R < li> < UL> (Part No: 109509)
$51.00
PTO Bearing Cap Gasket -
  • For John Deere tractor models 840, 940 (& V), 1040 (& V), 1140 (& F, V), 1350, 1550, 1640 (& F), 1641, 1641F, 1750 (& V), 1840 (& F), 1850 (& F, V), 1850N, 1950 (& F), 1950N, 2040 (& F), 2040S, 2140, 2141, 2150, 2155, 2250 (& F), 2251, 2255, 2350, 2351, 2355, 2355N, 2450 (& F), 2541, 2550, 2555, 2650 (& F), 2650N, 2651, 2750, 2755, 2850, 2855N, 2941, 2950, 2951, 2955, 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3641, 3650, 3651< li>
  • Replaces John Deere OEM number A-L60548< li> < UL> (Part No: 179539)
$6.50
PTO Valve Housing Gasket -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R92472, R73160, R83564< li> < UL> (Part No: 179545)
$6.10
Range C and D Shift Cable -
  • For John Deere tractor models SE6010, SE6020, SE6110, SE6120, SE6210, SE6220, SE6310, SE6320, SE6410, SE6420, SE6520, SE6620, 6010, 6020, 6100, 6105M, 6110, 6110M, 6115M, 6120, 6120M, 6125M, 6130, 6130M, 6200, 6210, 6215, 6220, 6230, 6300, 6310, 6310S, 6320, 6320L, 6330, 6400, 6405, 6410, 6410S, 6415, 6420, 6420L, 6430, 6500, 6510S, 6520L< li>
  • Replaces John Deere OEM number AL223210, AL218523, AL209085, AL169432< li>
  • Length: 42.913"< li>
  • Travel Length: 1.969"< li> < UL> (Part No: 187045)
$50.00
Regulator Valve -
  • For John Deere tractor models 9530, 9630< li>
  • Replaces John Deere OEM number YZ502444< li>
  • Electro hydraulic regulator< li> < UL> (Part No: 162850)
$3525.00
Remote Break-Away Coupler, Remanufactured, AR40587, R34396 -
  • For John Deere tractor models 2510, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier), 5010, 5020, 7020, 7520< li>
  • Replaces John Deere OEM number AR40587, R34396< li> < UL> (Part No: 204647)
$590.01
Remote Break-Away Coupler, RH, Remanufactured, AR39036 -
  • For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 2940< li>
  • Replaces John Deere OEM number AR39036< li>
  • Replaces John Deere Casting number R39109< li>
  • Right Hand Side< li> < UL> (Part No: 207101)
$520.01
Rockshaft Housing Retainer -
  • For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number T21615< li> < UL> (Part No: 161844)
$6.70
Roller Bearing -
  • For John Deere tractor models 1640, 1830, 2030, 2040, 2040S, 2130, 2140, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5103, 5203, 5303, 5403, 5415, 5415H, 5425, 5615, 5625, 5715, 5715HC, 6030, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 444C, 444CH, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 544C, 570, 570A, 600, 640, 644A, 644B, 646, 646B, 700A, 760, 760A< li>
  • Replaces John Deere OEM number R27145< li> < UL> (Part No: 113887)
$0.55
Rubber Isolator -
  • For John Deere Construction & industrial models 444, 444C, 444CH, 444D, 544 (Dubuque s n 90297-later Welland s n 85000-later), 544A (Dubuque s n 90297-later Welland s n 85000-later), 544B, 544C, 544D, 644, 644A, 644B, 644C, 644D, 646, 646B, 646C, 762, 762A (s n 705645-earlier)< li>
  • Replaces John Deere OEM number AT29665< li> < UL> (Part No: 162615)
$71.00
SCV Lever -
  • For John Deere tractor models 2510, 3020, 4020< li>
  • Replaces John Deere OEM number R34235, R49186, R45306< li> < UL> (Part No: 121235)
$15.00
SCV Operating Arm -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2350, 2355, 2550, 2555, 2650 (Synchro-Transmission, European Edition), 2650N (Synchro-Transmission, European Edition), 2750, 2755, 2850 (Synchro-Transmission, European Edition), 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3040 (s n 430000-later), 3055, 3140 (s n 430000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R50012< li> < UL> (Part No: 115142)
$67.00
SCV Operating Arm -
  • For John Deere tractor models 2520, 3020 (s n 123000-later North American Edition), 4000 (s n 201000-later), 4020 (s n 201000-later), 4320, 4520, 4620< li>
  • Replaces John Deere OEM number R41122< li> < UL> (Part No: 115144)
$43.26
SCV Overhaul Kit -
  • For John Deere tractor models 1020, 1520, 1640 (s n 430000-later), 2020, 2030, 2040 (s n 430000-later), 2040 (s n 349999-earlier), 2040 (s n 350000-later), 2040S (s n 430000-later), 2140 (s n 430000-later), 2150, 2155, 2240 (s n 349999-earlier), 2240 (s n 350000-later), 2255, 2350, 2355N, 2440 (s n 340999-earlier), 2440 (s n 341000-later), 2520, 2550, 2630, 2640 (s n 340999-earlier), 2640 (s n 341000-later), 2750, 2840, 2855N< li>
  • Replaces John Deere OEM number RE10924< li> < UL> (Part No: 115325)
$28.26
SCV Remote Valve End Cover -
  • For John Deere tractor models 940, 1010, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2510, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 3030, 3040, 3130, 3140, 4010, 4020, 5010, 5020, 7020, 7520< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Compatible with John Deere Construction & industrial models 300< li>
  • Replaces John Deere OEM number R49186< li> < UL> (Part No: 112299)
$30.00
SCV Rod -
  • For John Deere tractor models 2510, 3010, 3020, 4010, 4020, 5020< li>
  • Replaces John Deere OEM number R45306, R27241, R49186, R34235< li> < UL> (Part No: 121328)
$12.00
Seal -
  • For John Deere Construction & industrial models 200CLC, 230CLC, 700H, 700J< li>
  • Replaces John Deere OEM number T177865< li> < UL> (Part No: 154282)
$3.56
Seal -
  • For John Deere Construction & industrial models 200CLC, 230CLC, 700H, 700J< li>
  • Replaces John Deere OEM number T177864< li> < UL> (Part No: 154283)
$12.76
Seal -
  • For John Deere Construction & industrial models 350, 400, 450, 455, 550, 555, 605, 650< li>
  • Replaces John Deere OEM number AT124100< li> < UL> (Part No: 154287)
$4.00
Seal -
  • For John Deere tractor models 2510, 2520, 3020 (s n 122999-earlier), 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4020 (s n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455< li>
  • Replaces John Deere OEM number R44815< li> < UL> (Part No: 167296)
$17.50
Seal - Hydraulic Track Tension Adjuster -
  • For John Deere Construction & industrial models 350, 350B, 350C, 350D, 400G, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 550, 550A, 550B, 550G, 555A, 555B, 555G< li>
  • Replaces John Deere OEM number T37660< li> < UL> (Part No: 154284)
$22.00
Sealing Washer -
  • For John Deere tractor models 1520, 1530, 2020, 2030, 2440< li>
  • Compatible with John Deere Construction & industrial models 400, 401, 401B, 401C, 401D< li>
  • Replaces John Deere OEM number T22095< li> < UL> (Part No: 168332)
$2.40
Selective Control Lever -
  • For John Deere tractor models 1020, 1120, 2020, 2120, 3120< li>
  • Replaces John Deere OEM number AT31874< li> < UL> (Part No: 125425)
$26.26
Selective Control Lever Arm -
  • For John Deere tractor models 4040, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4960< li>
  • Replaces John Deere OEM number R62555< li> < UL> (Part No: 109972)
$73.00
Selective Control Lever with knob -
  • For John Deere tractor models 1020, 1120, 2020, 2120, 3120< li>
  • Replaces John Deere OEM number AT31875< li> < UL> (Part No: 125426)
$26.26
Selective Control Valve Break-Away Coupler -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T, 9100, 9200, 9300, 9300T, 9400, 9400T< li>
  • Replaces John Deere OEM number R52981< li> < UL> (Part No: 155410)
$144.00
Selective Control Valve Cover Plate -
  • For John Deere tractor models 4030 (s n 12618-later), 4040, 4230 (s n 27855-later), 4240, 4350, 4430 (s n 44905-later), 4440, 4630 (s n 16903-later), 4640, 4840, 8430 (s n 001741-later), 8440, 8630 (s n 002453-later), 8640< li>
  • Replaces John Deere OEM number AR73897< li>
  • Replaces John Deere Casting number R60395, R65146< li>
  • Casting No. R60395, R65146< li> < UL> (Part No: 109887)
$580.00
Selective Control Valve Cover Plate -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4030 (s n 12617-earlier), 4230 (s n 27854-earlier), 4320, 4430 (s n 44904-earlier), 4630 (s n 16902-earlier), 8430 (s n 001740-earlier), 8630 (s n 002452-earlier)< li>
  • Replaces John Deere OEM number AR41969, AR54331, AR71188< li>
  • Replaces Casting number R41445, R50066, R59081, R60334< li> < UL> (Part No: 111438)
$130.00
Selective Control Valve Cover Plate - Triple -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4030 (s n 12617-earlier), 4230 (s n 27854-earlier), 4320, 4430 (s n 44904-earlier), 4630 (s n 16902-earlier), 8430 (s n 001740-earlier), 8630 (s n 002452-earlier)< li>
  • Replaces John Deere OEM number AR71189< li>
  • Replaces Casting number R41448, R50067, R59084< li> < UL> (Part No: 111439)
$350.00
Selective Control Valve Kit -
  • For John Deere tractor models 1020, 1040, 1140, 1520, 1530, 1640, 1840, 2020, 2030, 2040, 2040S, 2140, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3020, 3040, 3140, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AR45647, AR52629, AR78396, AR86535, RE10924< li>
  • Includes: Selective Control Valves with Teflon Seat, SCV Overhaul Kit and Breakaway Coupler Overhaul Kit< li> < UL> (Part No: 177053)
$281.00
Selective Control Valve Kit -
  • For John Deere tractor models 1020, 1040, 1140, 1520, 1530, 1640, 1840, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3020 (s n 123000-later), 3040, 3140, 3150, 3155, 3255, 4000, 4020 (s n 201000-later), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Compatible with John Deere Construction & industrial models 300B< li>
  • Replaces John Deere OEM number AR45647, AR52629, AR78396, AR86535, RE10924< li>
  • Includes; Selective Control Valves with Teflon Seat and SCV Overhaul Kit< li> < UL> (Part No: 177055)
$243.00
Selective Control Valve Kit, Remanufactured -
  • For John Deere tractor models 4520, 4620< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203696)
$2463.01
Selective Control Valve Kit, Remanufactured -
  • For John Deere tractor models 4640, 4840< li>
  • 2nd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205351)
$1650.01
Selective Control Valve Kit, Remanufactured, AR102602 -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number AR102602< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 205369)
$3341.01
Selective Control Valve Kit, Remanufactured, AR144130 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320< li>
  • Replaces John Deere OEM number AR144130< li>
  • 3rd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203688)
$2463.01
Selective Control Valve Kit, Remanufactured, AR40827 -
  • For John Deere tractor models 4520, 4620< li>
  • Replaces John Deere OEM number AR40827< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203689)
$1785.01
Selective Control Valve Kit, Remanufactured, AR41039 -
  • For John Deere tractor models 2510, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier), 5010, 5020 (s n 024999-earlier)< li>
  • Replaces John Deere OEM number AR41039< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, Breakaway Coupler, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205383)
$1475.01
Selective Control Valve Kit, Remanufactured, AR42085 -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR42085< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, Breakaway Coupler, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203681)
$1631.01
Selective Control Valve Kit, Remanufactured, AR44129 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320< li>
  • Replaces John Deere OEM number AR44129< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203683)
$1785.01
Selective Control Valve Kit, Remanufactured, AR44129 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320< li>
  • Replaces John Deere OEM number AR44129< li>
  • 2nd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Core Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203685)
$1690.01
Selective Control Valve Kit, Remanufactured, AR44130 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320< li>
  • Replaces John Deere OEM number AR44130< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203686)
$1805.01
Selective Control Valve Kit, Remanufactured, AR44130 -
  • For John Deere tractor models 4520, 4620< li>
  • Replaces John Deere OEM number AR44130< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203694)
$1805.01
Selective Control Valve Kit, Remanufactured, AR65489 -
  • For John Deere tractor models 4030 (s n 016506-later), 4230 (s n 040166-later), 4430 (s n 072344-later), 4630 (s n 030272-later)< li>
  • Replaces John Deere OEM number AR65489< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203699)
$2040.01
Selective Control Valve Kit, Remanufactured, AR65489 -
  • For John Deere tractor models 4030 (s n 016506-later), 4230 (s n 040166-later), 4430 (s n 072344-later), 4630 (s n 030272-later)< li>
  • Replaces John Deere OEM number AR65489< li>
  • 2nd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203700)
$1650.01
Selective Control Valve Kit, Remanufactured, AR76006 -
  • For John Deere tractor models 4030 (s n 016505-earlier), 4230 (s n 040165-earlier), 4430 (s n 072343-earlier), 4630 (s n 030271-earlier)< li>
  • Replaces John Deere OEM number AR76006< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203692)
$2040.01
Selective Control Valve Kit, Remanufactured, AR76006 -
  • For John Deere tractor models 4030 (s n 016505-earlier), 4230 (s n 040165-earlie), 4430 (s n 072343-earlier), 4630 (s n 030271-earlier)< li>
  • Replaces John Deere OEM number AR76006< li>
  • 2nd Valve Kit With Iso Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203693)
$1475.01
Selective Control Valve Kit, Remanufactured, AR77250 -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • Replaces John Deere OEM number AR77250< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205348)
$1475.01
Selective Control Valve Kit, Remanufactured, AR77250 -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • Replaces John Deere OEM number AR77250< li>
  • 2nd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205350)
$1475.01
Selective Control Valve Kit, Remanufactured, AR77251 -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • Replaces John Deere OEM number AR77251< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205352)
$2431.01
Selective Control Valve Kit, Remanufactured, AR77251 -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR77251< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205353)
$2431.01
Selective Control Valve Kit, Remanufactured, AR77251 -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • Replaces John Deere OEM number AR77251< li>
  • 3rd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205354)
$2463.01
Selective Control Valve Kit, Remanufactured, AR77251 -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR77251< li>
  • 3rd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • $100 Core Charge For 2nd Plate< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205355)
$2463.01
Selective Control Valve Kit, Remanufactured, AR82572 -
  • For John Deere tractor models 4520, 4620< li>
  • Replaces John Deere OEM number AR82572< li>
  • 2nd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203691)
$1770.01
Selective Control Valve Kit, Remanufactured, AR82572 -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR82572< li>
  • 2nd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 205349)
$2040.01
Selective Control Valve Kit, Remanufactured, AR85251 -
  • For John Deere tractor models 4030 (s n 016505-earlier), 4230 (s n 040165-earlier), 4430 (s n 072343-earlier), 4630 (s n 030271-earlier)< li>
  • Replaces John Deere OEM number AR85251< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203697)
$2431.01
Selective Control Valve Kit, Remanufactured, AR85251 -
  • For John Deere tractor models 4030 (s n 016506-later), 4230 (s n 040166-later), 4430 (s n 072344-later), 4630 (s n 030272-later)< li>
  • Replaces John Deere OEM number AR85251< li>
  • 3rd Valve Kit< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203702)
$2431.01
Selective Control Valve Kit, Remanufactured, AR85251 -
  • For John Deere tractor models 4030 (s n 016506-later), 4230 (s n 040166-later), 4430 (s n 072344-later), 4630 (s n 030272-later)< li>
  • Replaces John Deere OEM number AR85251< li>
  • 3rd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 203703)
$2463.01
Selective Control Valve Kit, Remanufactured, AR85251 -
  • For John Deere tractor models 4030 (s n 016505-earlier), 4230 (s n 040165-earlier), 4430 (s n 072343-earlier), 4630 (s n 030271-earlier)< li>
  • Replaces John Deere OEM number AR85251< li>
  • 3rd Valve Kit With ISO Style Couplers< li>
  • Kit Includes SCV Valve, SCV Cover Plate, Lever & Linkage Kit< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li> < UL> (Part No: 205382)
$2463.01
Selective Control Valve Lever -
  • For John Deere tractor models 2520, 3020, 4000, 4020, 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR40991< li> < UL> (Part No: 115456)
$145.00
Selective Control Valve Lever -
  • For John Deere tractor models 2520, 3020 (s n 12300-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR40990< li>
  • Second Lever< li> < UL> (Part No: 115457)
$230.01
Selective Control Valve O-Ring Kit -
  • For John Deere tractor models 8120, 8120T, 8130, 8220, 8220T, 8230, 8230T, 8320, 8320T, 8330, 8330T, 8420, 8420T, 8430, 8430T, 8520, 8520T, 8530, 9120, 9220, 9230 (s n 012999-earlier), 9320, 9320T, 9330 (s n 012999-earlier), 9420, 9420T, 9430 (s n 012999-earlier), 9430T (s n 910999-earlier), 9520, 9520T, 9530 (s n 012999-earlier), 9530T (s n 910999-earlier), 9620, 9620T, 9630 (s n 012999-earlier), 9630T (s n 910999-earlier)< li>
  • Replaces John Deere OEM number RE237001< li> < UL> (Part No: 171938)
$25.20
Selective Control Valve, Remanufactured -
  • For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040 (s n 266750-later), 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3030, 3130, 7020 (s n 001816-earlier)< li>
  • All models listed without SoundGard cabs< li>
  • 1st Valve< li>
  • Poppet type< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203670)
$825.01
Selective Control Valve, Remanufactured -
  • For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040 (s n 266750-later), 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3030, 3130, 7020 (s n 001816-earlier)< li>
  • All models listed without SoundGard cabs< li>
  • 2nd Valve< li>
  • Poppet Type< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203671)
$830.01
Selective Control Valve, Remanufactured -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2555, 2750, 2940, 2950, 3040, 3140 (All With SoundGard Cabs)< li>
  • 1st Valve With SG Cab< li>
  • Poppet Type< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203672)
$900.01
Selective Control Valve, Remanufactured -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2555, 2750, 2940, 2950, 3040, 3140 (All With SoundGard Cabs)< li>
  • 2nd Valve< li>
  • Poppet Type< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203673)
$825.01
Selective Control Valve, Remanufactured -
  • For John Deere tractor models 2155, 2355, 2555, 2755, 2850, 2955, 3055, 3150, 3155, 3255< li>
  • 1st Valve< li>
  • Poppet Type< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203674)
$910.01
Selective Control Valve, Remanufactured, AR40827 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR40827< li>
  • 1st or 2nd Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203666)
$1350.01
Selective Control Valve, Remanufactured, AR40827 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR40827< li>
  • 1st or 2nd Valve with ISO style couplers< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203717)
$1350.01
Selective Control Valve, Remanufactured, AR41023 -
  • For John Deere tractor models 2510, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier)< li>
  • Replaces John Deere OEM number AR41023< li>
  • 1st Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203660)
$1150.01
Selective Control Valve, Remanufactured, AR41037, R27584, R41175 -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR41037< li>
  • Replaces John Deere Casting number R27584, R41175< li>
  • 1st Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203658)
$1025.01
Selective Control Valve, Remanufactured, AR41039 -
  • For John Deere tractor models 2510, 3020 (s n 122999-earlier), 4020 (s n 200999-earlier), 5010, 5020 (s n 024999-earlier)< li>
  • Replaces John Deere OEM number AR41039< li>
  • 2nd Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203661)
$1450.01
Selective Control Valve, Remanufactured, AR42085 -
  • For John Deere tractor models 3010, 4010< li>
  • Replaces John Deere OEM number AR42085< li>
  • 2nd Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203659)
$930.01
Selective Control Valve, Remanufactured, AR44130 -
  • For John Deere tractor models 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320, 4520, 4620< li>
  • Replaces John Deere OEM number AR44130< li>
  • 3rd Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203667)
$1125.01
Selective Control Valve, Remanufactured, AR82561 -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AR82561< li>
  • 3rd or 4th Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203677)
$1200.01
Selective Control Valve, Remanufactured, AR82572 -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AR82572< li>
  • Replaces Casting number R65284< li>
  • Housing Casting No. R65284< li>
  • 1st or 2nd Valve< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203675)
$1325.01
Selective Control Valve, Remanufactured, AR82572 -
  • For John Deere tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number AR82572< li>
  • Replaces John Deere Casting number R65284< li>
  • Housing Casting No. R65284< li>
  • 1st or 2nd Valve ISO Style Couplers< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203676)
$1500.01
Selective Control Valve, Remanufactured, RE22584 -
  • For John Deere tractor models 2155, 2355, 2555, 2755, 2850, 2955, 3055, 3150, 3155, 3255< li>
  • Replaces John Deere OEM number RE22584< li>
  • 2nd Valve< li>
  • Poppet Type< li>
  • To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters< B>< li> < UL> (Part No: 203744)
$910.01
Solenoid Valve -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9360R, 9400, 9400T, 9410R, 9420, 9420T, 9430, 9460R, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number RE159088< li> < UL> (Part No: 156033)
$620.00
Thrust Washer -
  • For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 1020, 1520, 1530, 1830, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640< li>
  • Replaces John Deere OEM number T141566, T21424< li> < UL> (Part No: 161854)
$1.86
Tractor Canopy Headliner -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 5010, 5020, 6030< li>
  • Tractor Canopy use Item #: 167655< li> < UL> (Part No: 167691)
$271.00
Tractor Canopy Headliner -
  • For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1250, 1450, 1520, 1530, 1550, 1630, 1640, 1650, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3120, 3130, 3135, 3140< li>
  • Tractor Canopy use Item #: 167659< li> < UL> (Part No: 167692)
$270.00
Tractor Floor Mat, 5/8" Thick -
  • For John Deere Construction & industrial models 750C, 750CII, 850C, 850CII< li>
  • Replaces John Deere OEM number T141114< li>
  • 1 8" Textured Rubber Top with a 1 2" Foam Bottom< li>
  • 5 8" Thick Floor Mat with Inner Sound Barrier< li> < UL> (Part No: 172222)
$164.00
Tractor Floor Mat - Left Hand, 5/8" Thick -
  • For John Deere tractor models 5045E, 5055E, 5065E, 5075E, 5075M, 5090R, 5100R, 5125R, 5200, 5210, 5300, 5310, 5310N, 5320N, 5400, 5410, 5415, 5415H, 5420, 5420N, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5615, 5715, 5715HC, 6100D, 6110D, 6115D, 6125D, 6130D, 6140D< li>
  • Replaces John Deere OEM number R129137< li>
  • 1 8" Textured Rubber Top with a 1 2" Foam Bottom< li>
  • 5 8" Thick Floor Mat with Inner Sound Barrier< li>
  • For Right Hand Mat use Item #: 172210< li> < UL> (Part No: 172208)
$60.00
Tractor Floor Mat - Right Hand, 5/8" Thick -
  • For John Deere tractor models 5045E, 5055E, 5065E, 5075E, 5075M, 5090R, 5100R, 5125R, 5200, 5210, 5300, 5310, 5310N, 5320N, 5400, 5410, 5415, 5415H, 5420, 5420N, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5615, 5715, 5715HC, 6100D, 6110D, 6115D, 6125D, 6130D, 6140D< li>
  • Replaces John Deere OEM number R129139< li>
  • 1 8" Textured Rubber Top with a 1 2" Foam Bottom< li>
  • 5 8" Thick Floor Mat with Inner Sound Barrier< li>
  • For Left Hand Mat use Item #: 172208< li> < UL> (Part No: 172210)
$60.00
TractorMat™ Floor Mat - John Deere -
  • For John Deere tractor models 6105R, 6110R, 6115R, 6120R, 6125R, 6130R, 6140R, 6145R, 6150R, 6155R, 6170R, 6175R, 6190R, 6195R, 6210R, 6215R< li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li>
  • Color: Tan< li> < UL> (Part No: 161400)
$174.88
TractorMat™ Floor Mat - John Deere -
  • For John Deere tractor models 9370R, 9420R, 9470R, 9520R, 9570R, 9620R< li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li>
  • Color: Tan< li> < UL> (Part No: 161401)
$174.88
TractorMat™ Floor Mat - John Deere -
  • For John Deere tractor models 6105M, 6110M, 6115M, 6120M, 6125M, 6130M, 6140M, 6145M, 6150M, 6155M, 6170M, 6175M, 6195M< li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li>
  • Color: Tan< li> < UL> (Part No: 161402)
$174.88
TractorMat™ Floor Mat - John Deere -
  • For John Deere tractor models 5080M, 5085M, 5090M, 5100E, 5100M, 5115M< li>
  • Color: Tan< li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li> < UL> (Part No: 163625)
$174.88
TractorMat™ Floor Mat - John Deere -
  • For John Deere tractor models 7630, 7720, 7730, 7820, 7830, 7920, 7930, 8130, 8230, 8230T, 8330, 8330T, 8430, 8430T< li>
  • Color: Tan< li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li> < UL> (Part No: 163626)
$174.88
TractorMat™ Floor Mat - John Deere With Foot Throttle -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8320R, 8335R, 8345R, 8360R, 8370R, 8400R (All with foot throttle)< li>
  • Designed for models with fridge but will work on all applications < li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li>
  • Color: Tan< li>
  • For models without foot throttle use Item #: 161404< li> < UL> (Part No: 161403)
$174.88
TractorMat™ Floor Mat - John Deere Without Foot Throttle -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8225R, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8310RT, 8320R, 8320RT, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8370RT, 8400R (All without foot throttle)< li>
  • Designed for models with fridge but will work on all applications < li>
  • Laser measured and formed for a perfect fit< li>
  • High grade durable plastic< li>
  • Flexible for easy installation and removal < li>
  • Easy and quick to clean< li>
  • Made in the USA< li>
  • Color: Tan< li>
  • For models with foot throttle use Item #: 161403< li> < UL> (Part No: 161404)
$174.88
Tractor Mud Mat -
  • For John Deere tractor models 6100, 6110, 6200, 6210, 6300, 6310, 6400, 6410< li> < UL> (Part No: 172182)
$185.00
Tractor Mud Mat -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li> < UL> (Part No: 172194)
$185.00
Transmission Rear Cover Kit -
  • For John Deere tractor models 8120, 8120T, 8130, 8220, 8220T, 8230, 8230T, 8320, 8320T, 8330, 8330T, 8420, 8420T, 8430, 8430T, 8520, 8520T< li>
  • Replaces John Deere OEM number RE203783< li>
  • Replaces Casting number R163964< li> < UL> (Part No: 160263)
$6450.00
Transmission Separator Plate -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7505, 7510, 7520, 7600, 7610, 7700, 7710, 7715, 7720, 7800, 7810, 7820, 7920< li>
  • Replaces John Deere OEM number R101160, R209938< li>
  • Inner Diameter: 9.37"< li>
  • Outer Diameter: 13.465"< li> < UL> (Part No: 155531)
$51.00
Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Part No: 179139)		$108.00
Umbrella Bracket Assembly - For tractor models A, AO, AR, B, BO, BR, D, G, GP, H, L, LA, LI. (Part No: 179958)		$76.00
Upholstery Kit - 10 Piece Brown -
  • For John Deere tractor models 4050, 4250, 4450, 4650< li>
  • Replaces John Deere OEM number RE52947 KIT, R72883, R76317< li>
  • Brown 10 piece< li>
  • Included in kit are OEM numbers: R72883, R76317, R73278, R72882, R73320, R72884, R87481, R73187, R75965, R73313< li> < UL> (Part No: 165967)
$260.00
Valve -
  • For John Deere tractor models 6100 (Europe), 6200 (Europe), 6200, 6200L, 6300 (Europe), 6300, 6300L, 6400 (Europe), 6400, 6400L, 6500, 6500L, 6506 (Europe), 6600 (Europe), 6800 (Europe), 6900 (Europe)< li>
  • Replaces John Deere OEM number R127789< li>
  • Hydraulic Control Valve< li> < UL> (Part No: 150051)
$280.00
Vinyl Air Filter Cover, Sailcloth Tan -
  • For John Deere tractor models 2355, 2555, 2755, 2955, 3055, 3155, 3255, 4055, 4255, 4455, 4555, 4560, 4755, 4760, 4955, 4960< li>
  • Color: Sailcloth Tan< li>
  • Material: Perforated Vinyl (18%)< li> < UL> (Part No: 168828)
$52.00
Wear Ring -
  • For John Deere Construction & industrial models 490D, 490E, 495D< li>
  • Replaces John Deere OEM number TH109323< li> < UL> (Part No: 153689)
$17.76
Wear Ring -
  • For John Deere Construction & industrial models 490D, 490E, 495D< li>
  • Replaces John Deere OEM number TH109324< li> < UL> (Part No: 153690)
$51.00
Weather Strip Door Seal - Left Hand -
  • For John Deere tractor models 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4650, 4755, 4760, 4850, 4955, 4960, 7200, 7400, 7600, 7700, 7800< li>
  • Replaces John Deere OEM number R238022, RE17519, R50451, AR93828< li>
  • Fits Left Hand Side< li> < UL> (Part No: 156591)
$6.96
Weather Strip Seal - Door -
  • For John Deere tractor models 2140, 2350, 2355 (s n 631621-earlier), 2550, 2555 (s n 631621-earlier), 2750, 2755 (s n 631621-earlier), 2940, 2950, 3140, 3150, 3155 (s n 631621-earlier), 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5220, 5320, 5420, 5420 (all s n 420001-later), 5520, 5520 (all s n 420001-later), 7630, 7720, 7730, 7820, 7920, 8100T, 8110, 8110T, 8120, 8120T, 8130, 8200T, 8210, 8210T, 8220, 8220T, 8230, 8230T, 8295RT (all s n 900101-907100-earlier), 8300T, 8310, 8310T, 8320, 8320RT (all s n 900101-907100-earlier), 8320T, 8330, 8330T, 8345RT (all s n 900101-907100-earlier), 8400T, 8410, 8410T, 8420, 8420T, 8430, 8430T, 8520, 8520T, 8530, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9420, 9420T, 9430, 9430T, 9520, 9520T, 9530, 9530T, 9620, 9620T, 9630, 9630T< li>
  • Replaces John Deere OEM number RE246465, R206158, AR52936, AR86110, RE25852, RE29728, RE51363, RE62966, RE63424< li>
  • This bulb seal will fit many different areas of the cab depending on the model< li>
  • Rear window may need to cut to length for some applications< li>
  • Actual length: 198"< li> < UL> (Part No: 127300)
$28.76
Weather Strip Seal - Door -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2940, 3040, 3140, 4020 (S), 4030, 4040 (EUR), 4050, 4055, 4230, 4240 (EUR), 4240 (S), 4250, 4255, 4350, 4430, 4440 (EUR), 4450, 4455, 4630, 4640, 4650, 4840, 4850, 8440, 8630, 8640< li>
  • Replaces John Deere OEM number R58341, R112304, R52590, R56496< li> < UL> (Part No: 157146)
$18.00
Weather Strip Seal - Door Frame -
  • For John Deere tractor models 4040, 4240, 4440< li>
  • Replaces John Deere OEM number AR85558< li> < UL> (Part No: 156596)
$40.26
Weather Strip Seal - Door Frame -
  • For John Deere tractor models 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850< li>
  • Replaces John Deere OEM number RE240206< li> < UL> (Part No: 156598)
$12.76
Weather Strip Seal, Door Trim -
  • For John Deere tractor models 4040 (Europe), 4040S, 4050 (s n 011261-later), 4055, 4240 (Europe), 4240S, 4250 (s n 011261-later), 4255, 4350, 4440 (Europe), 4450 (s n 011261-later), 4455, 4555, 4560, 4650 (s n 005710-later), 4755, 4760, 4850 (s n 005710-later), 4955, 4960< li>
  • Replaces John Deere OEM number RE15998< li> < UL> (Part No: 162775)
$31.50
Weather Strip Seal, Lower Cab Door Glass, - Right Hand -
  • For John Deere tractor models 2940, 4030, 4040 (s n 249999-earlier), 4040S, 4230, 4240S, 4350, 4430, 4630, 4640 (s n 249999-earlier), 4840 (s n 249999-earlier)< li>
  • Replaces John Deere OEM number R50541< li>
  • Right side lower door cab seal for the bottom of the glass< li>
  • This product is made from the original specs and from high quality ozone resistant materials< li>
  • Length: 73.75"< li> < UL> (Part No: 161886)
$13.50
Weather Strip Seal - Lower Door -
  • For John Deere tractor models 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE22488, AR85560< li>
  • For Lower Cab Door< li> < UL> (Part No: 156594)
$14.00
Weather Strip Seal, Lower Door Window - Left Hand -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2250 (European), 2350, 2355, 2450 (European), 2550, 2555, 2650 (European), 2750, 2755, 2850 (European), 2855N, 2940, 2950, 2955 (s n-earlier), 3040, 3050 (European), 3055, 3140, 3150, 3155, 3255, 3350 (European), 3640 (European), 3650 (European), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number L40413, R52113< li>
  • Fits Left Hand Side< li>
  • Lower door weatherstrip< li>
  • For Cab Glass, Door, Lower - Left Hand use Item #: 150463< li> < UL> (Part No: 155733)
$65.00
Weather Strip Seal - Lower Front Window - Right Hand -
  • For John Deere tractor models 1640, 2040, 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R52115, L40415< li>
  • Lower front right-side weatherstrip< li>
  • For Cab Glass, Lower - Right Hand use Item #: 113044< li> < UL> (Part No: 155730)
$39.00
Weather Strip Seal - Rear -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T< li>
  • Replaces John Deere OEM number R234302, R111684, R117033< li>
  • Length: 52"< li> < UL> (Part No: 163689)
$13.26
Weather Strip Seal - Upper Door -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150 (BSN 017269), 3640 (BSN 017269), 4030, 4040, 4040 (S), 4050 (BSN 017297), 4230, 4240, 4240 (S), 4250 (BSN 017297), 4430, 4440, 4450 (BSN 017297), 4630, 4640, 4650 (BSN 008568), 4840, 4850 (BSN 008568)< li>
  • Replaces John Deere OEM number AR85559< li>
  • For Upper Cab Door< li>
  • For Glass Replacement use Item #: 110122< li> < UL> (Part No: 156593)
$24.50
Weather Strip Seal - Upper Door -
  • For John Deere tractor models 4055 (ASN 017298), 4250 (ASN 017298), 4255, 4450 (ASN 017298), 4455, 4555, 4560, 4650 (ANS 008569), 4760, 4850 (ANS 008569), 4955, 4960< li>
  • Replaces John Deere OEM number RE22487, RE16307< li>
  • For Upper Cab Door< li>
  • For Glass Replacement use Item #: 110122< li> < UL> (Part No: 156595)
$18.76
Weather Strip Seal, Upper Door - Right Hand -
  • For John Deere tractor models 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8450, 8650, 8850< li>
  • Replaces John Deere OEM number R83716, R75761< li>
  • Sound Guard Cab Weather Strip< li> < UL> (Part No: 156599)
$25.00
Weather Strip Seal, Upper Door Window - Left Hand -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150 (s n 071269-earlier), 3640 (s n 071269-earlier), 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4350, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R52114, L40414< li>
  • Fits Left Hand Side< li>
  • Upper door< li>
  • For Cab Glass, Upper Door - Left Hand use Item #: 110122< li> < UL> (Part No: 155732)
$39.00
Weather Strip Seal, Upper Front Window Seal - Right Hand -
  • For John Deere tractor models 1640, 2040, 2940, 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number L40412< li>
  • Windshield right-hand side weatherstrip< li> < UL> (Part No: 155734)
$64.00
Weather Strip Seal - Window -
  • For John Deere tractor models 1640, 2040, 2140, 2350, 2550, 2750, 2940, 2950, 3040, 3140, 4040 (s n 250000-later), 4050, 4055, 4240 (s n 250000-later), 4250, 4255, 4350, 4440 (s n 250000-later), 4450, 4455, 4555, 4560, 4640 (s n 250000-later), 4650, 4755, 4760, 4840 (s n 250000-later), 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R237130, AR89830< li> < UL> (Part No: 155728)
$18.83
Wheel Half - WHEEL HALF For 4, 6 cultivators. (Part No: TP-C1094N)$9.35
 
Oil System
Air Conditioing Condenser with Oil Cooler -
  • For John Deere tractor model 8650< li>
  • Replaces John Deere OEM number AR98651< li>
  • Made in the USA< li>
  • Core Height: 24-1 2"< li>
  • Core Width: 20"< li>
  • Core Thickness: 3"< li> < UL> (Part No: 164525)
$1740.80
Condenser -
  • For John Deere Construction & industrial model 310K< li>
  • Replaces John Deere OEM number AT448999< li>
  • 22" x 16" x 3"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156410)
$393.07
Condenser -
  • For John Deere Construction & industrial models 210K, 310SKTC, 410K, 410KTC< li>
  • Replaces John Deere OEM number A370013< li>
  • 16" x 17-1 4" x 3"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156411)
$814.30
Condenser -
  • For John Deere Construction & industrial models 310K, 310SK, 325SK, 410K< li>
  • Replaces John Deere OEM number AT440431< li>
  • 16" x 16-3 4" x 3-1 2"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156412)
$348.00
Condenser with Oil Cooler -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number AR112966, AR96903< li>
  • Overall Height: 28"< li>
  • Overall Width: 26 1 2"< li>
  • Core Height: 23"< li>
  • Core Width: 26"< li>
  • Depth: 3< li>
  • Rows: 4< li>
  • Inlet: #8 Male O-Ring< li>
  • Outlet: #6 Male O-Ring< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 128201)
$598.01
Condenser with Oil Cooler -
  • For John Deere tractor models 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7800, 7810 (s n 089999-earlier)< li>
  • Replaces John Deere OEM number RE34166< li>
  • Overall Height: 30 1 4"< li>
  • Overall Width: 22" < li>
  • Core Height: 25 3 4"< li>
  • Core Width: 19"< li>
  • Depth: 4< li>
  • Inlet: 3 4-16 UNF Thread< li>
  • Outlet: 5 8-18 UNF Thread< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 128214)
$583.83
Condenser with Oil Cooler -
  • For John Deere tractor model 8640< li>
  • Replaces John Deere OEM number AR85880< li>
  • Core Height: 28"< li>
  • Core Width 24 7 8"< li>
  • Depth: 3 1 16"< li> < UL> (Part No: 128218)
$1575.00
Dual Oil Cooler -
  • For John Deere tractor models 8560, 8760, 8960< li>
  • Replaces John Deere OEM number RE41760< li>
  • Core Dimensions: 16' x 38' x 3"< li>
  • Made in the USA< li> < UL> (Part No: 164490)
$1024.30
Dual Oil Cooler -
  • For John Deere tractor models 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE70870< li>
  • Core Height: 24"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3"< li>
  • Made is the USA< li> < UL> (Part No: 164497)
$2549.00
Dual Oil Cooler -
  • For John Deere tractor models 9120, 9220, 9320, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number RE172498< li>
  • Core Height: 28"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3-1 8"< li>
  • Made in the USA< li> < UL> (Part No: 164526)
$3446.14
Engine Oil Cooler -
  • For John Deere tractor models 4050, 4250, 4440, 4450, 4630, 4640, 4650 (Engine s n 336698-earlier), 4840, 4850 (Engine s n 336698-earlier), 7020, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 444 (Engine s n 263265-later), 544 (Engine s n 165808-earlier), 544A (Engine s n 165808-earlier), 644A (Engine s n 164553-earlier), 644C (Engine s n 336698-earlier), 644D (Engine s n 336698-earlier), 644E (Engine s n 100664-earlier), 646C (Engine s n 336698-earlier), 690C (Engine s n 336698-earlier), 690DR, 693C (Engine s n 336698-earlier), 740, 740A (Engine s n 336698-earlier), 743, 743A (Engine s n 336698-earlier), 762A (Engine s n 336698-earlier), 762B (Engine s n 336698-earlier), 770A (Engine s n 336698-earlier), 770AH (Engine s n 336698-earlier), 770B (Engine s n 336698-earlier), 770BH (Engine s n 336698-earlier), 772 (Engine s n 336698-earlier), 772A (Engine s n 336698-earlier), 772AH (Engine s n 336698-earlier), 772BH (Engine s n 336698-earlier), 790 (Engine s n 336698-earlier), 790D (Engine s n 336698-earlier), 792 (Engine s n 336698-earlier), 850B (Engine s n 336698-earlier), 892 (Engine s n 336698-earlier)< li>
  • Replaces John Deere OEM number AT25038< li>
  • 12 Plates< li> < UL> (Part No: 124572)
$192.00
Engine Oil Pump, Diesel, Remanufactured, AR53103, SE500890 -
  • For John Deere tractor models 4000 (s n 201000-later), 4010, 4020, 4230< li>
  • Compatible with John Deere Engine(s) 6404D< li>
  • Replaces John Deere OEM number AR53103, SE500890, AR31887< li>
  • Replaces Casting number R26143, R27919, R53303< li>
  • Fits Diesel only< li>
  • 1 Piece Shaft and Gear Style, Cam Driven, 20 Tooth Drive Gear< li> < UL> (Part No: 203576)
$1000.01
Engine Oil Pump Strainer - Used on John Deere models: A Serial Number 584000 and up, B Serial Number 201000 and up, 50, 60, 70 gas LP, 630, 730 gas LP, 520, 530, 620, 720 gas LP. (Part No: 164417)		$33.00
Engine Oil Pump Strainer Screen - Used on John Deere: A Serial Number 424025-487999, B up to Serial Number 95999, G, AO Serial Number 251486-259999, AI Serial Number 251486-259999, AR Serial Number 251486-259999, BO, BR. (Part No: 164415)		$33.00
Engine Oil Pump Strainer Screen - Used on John Deere models: A Serial Number 488000-583999, B Serial Number 96000-200999, AO Serial Number 260000-271999, AR Serial Number 260000-271999. (Part No: 164416)		$33.00
Engine Oil Pump Strainer Screen - Used on John Deere H, this screen replaces John Deere OEM part number AH589R. (Part No: 164419)		$33.00
Engine Oil Pump Strainer Screen - Used on John Deere models M, MI, MT, 320, MC, 40, 330, 420, 430 this strainer replaces John Deere part numbers AM734T and AM230T. (Part No: 164420)		$33.00
Engine Oil Pump Strainer Screen - Used on diesel John Deere models 70, 730, R, 720 this screen replaces John Deere part numbers AR445R (Part No: 164418)		$33.00
Fuel Cooler -
  • For John Deere tractor models 7200, 7400< li>
  • Replaces John Deere OEM number RE55140< li>
  • Core Height: 4"< li>
  • Core Width: 16"< li>
  • Core Thickness: 5 8"< li>
  • Fitting Inlet: 5 8"< li>
  • Fitting Outlet: 5 8"< li>
  • Made in the USA< li> < UL> (Part No: 164495)
$333.60
Hydraulic Oil Cooler -
  • For John Deere tractor models 4240, 4440, 4640< li>
  • Replaces John Deere OEM number AR80128< li>
  • Core Height: 22"< li>
  • Core Width: 20 1 2"< li>
  • Depth: 1 1 2"< li> < UL> (Part No: 128209)
$1775.00
Hydraulic Oil Cooler Reservoir -
  • For John Deere tractor models 4000 (Syncro s n 250001-later), 4020 (Syncro s n 250001-later), 5010< li>
  • Replaces John Deere OEM number AR50592< li> < UL> (Part No: 109705)
$590.00
Oil Cooler - For tractor models (6600, 7700 SN# 215000 and up with 6.404D 6 cyl engine), (600, 4000, 4020 up to SN# 335845 with 6.404D engine), (4010 SN# up to 214999), (4040, 4230 SN# 335845 and up), (6600, 7700 SN# 335845 and up with 6.404T A). (Part No: 124050)		$125.00
Oil Cooler -
  • For John Deere tractor models 820 (s n 154765-earlier with 3.152 diesel engine), 820 (s n 15766-later with 3.152D Diesel engine), 830 (s n 15766-later with 3.152D Diesel engine), 940 (with 4.239D diesel engine), 1020 (s n 154765-earlier with 3.152 diesel engine), 1020 (s n 15766-later with 3.152D Diesel engine), 1030 (s n 154765-earlier with 3.152 diesel engine), 1030 (s n 15766-later with 3.152D Diesel engine), 1040 (with 3.179D diesel engine), 1140 (with 3.179D diesel engine), 1350 (with 3.179D diesel engine), 1420 (s n 179601-earlier with 3.164D diesel engine), 1520 (s n 179601-earlier with 3.164D diesel engine), 1530 (with 3.164D diesel engine), 1550 (with 3.179D diesel engine), 1630 (with 3.179D diesel engine), 1640 (with 3.164D diesel engine), 1750 (with 3.179D diesel engine), 1850 (with 3.179D diesel engine), 2020 (with 4.202 diesel engine), 2030 (s n 275483-later with 4.219 diesel engine), 2040 (with 3.179D diesel engine), 2040 (s n 179602-later with 3.164D diesel engine), 2040S (with 3.164D diesel engine), 2130 (with 4.239D diesel engine), 2140 (with 4.239TTurbo diesel engine), 2150 (with 3.179D diesel engine), 2155 (with 3.179D diesel engine), 2240 (with 3.179D diesel engine), 2250 (with 4.239TTurbo diesel engine), 2255 (with 3.179D diesel engine), 2320 (s n 275483-later with 4.219 diesel engine), 2350 (with 4.239D diesel engine), 2355 (with 4.239D diesel engine), 2355 (CS with 3.179T engine), 2440 (s n 275484-later with 4.219 diesel engine), 2450 (with 4.239TTurbo diesel engine), 2510 (with 4.202 diesel engine), 2520 (with 4.219 diesel engine), 2530 (s n 275484-later with 4.219 diesel engine), 2535 (with 4.239D diesel engine), 2550 (with 4.239D diesel engine), 2555 (with 4.239D diesel engine), 2555 (with 4.239TTurbo diesel engine), 2555 (TSS with 3.179T engine), 2630 (with 4.276D diesel engine), 2640 (with 4.276D diesel engine), 2650 (with 4.239TTurbo diesel engine), 2730 (with 4.239D diesel engine), 2735 (with 4.239D diesel engine), 2750 (with 4.239D diesel engine), 2750 (with 4.239TTurbo diesel engine), 2755 (s n 795106-earlier with 4.239TTurbo diesel engine), 2840 (s n 277549-later with 6.329 diesel engine), 2850 (with 4.239TTurbo diesel engine), 2855 (with 4.239TTurbo diesel engine), 2855N (s n 795106-earlier with 4.239TTurbo diesel engine), 2940 (s n 794193-earlier with 6.359D diesel engine), 2950 (with 6.359D diesel engine), 2955 (with 6.359D diesel engine), 2955 (with 6059D diesel engine), 3040 (s n 430000-later with 6.359D diesel engine), 3050 (with 6.359D diesel engine), 3130 (s n 277549-later with 6.329 diesel engine), 3140 (s n 430000-later with 6.359D diesel engine), 3150 (with 6.359D diesel engine), 3155 (with 6.359D diesel engine), 3155 (with 6059D diesel engine), 3255 (with 6.359D diesel engine), 3255 (with 6059D diesel engine), 3330 (with 4.239D diesel engine), 3350 (with 6.359D diesel engine), 3530 (s n 277549-later with 6.329 diesel engine), 3540 (with 6059T diesel engine), 3550 (with 6059T diesel engine), 3640 (with 6.359T diesel engine), 4020 (s n 277548-earlier with 6.329 diesel engine), 4030 (with 6.329 diesel engine), 4050 (with 6059T diesel engine), 4530 (with 6.359D diesel engine), 5200 (with 3029D engine), 5300 (with 3029D engine), 5400 (with 3029D engine), 5400N (with 3029T engine), 5500 (with 3029T engine), 5500N (with 4039T diesel engine), 5600 (Mercosur with 4039D diesel engine), 5700 (with 4039T diesel engine), 6100 (with 4039T diesel engine), 6200 (with 4039T diesel engine), 6210 (with 4039T diesel engine), 6300 (with 4039T diesel engine), 6310 (with 4039T diesel engine), 6400 (with 4045T diesel engine), 6410 (with 4045T diesel engine), 6500 (with 4039T diesel engine), 6500 (with 4045T diesel engine), 6500L (with 4045T diesel engine), 6510 (with 4045T diesel engine), 7200 (with 6.359T diesel engine), 7200 (with 6059T diesel engine)< li>
  • Compatible with John Deere Combine(s) 3300 (s n 275484-later with 4.219 diesel engine), 4400 (s n 277549-later with 6.329 diese (Part No: 123111)
$129.79
Oil Cooler -
  • For John Deere tractor models 655, 755, 756, 855, 856< li>
  • Replaces John Deere OEM number AM102152< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Core Height: 5"< li>
  • Core Width: 11"< li>
  • Core Thickness: 1-1 2"< li>
  • Fitting Inlet: 13 16" - 16 ORB< li>
  • Fitting Outlet: 13 16" - 16 ORB< li> < UL> (Part No: 152067)
$198.01
Oil Cooler -
  • For John Deere tractor models 7700, 7800, 8100, 8200, 8300, 8560, 8570< li>
  • Compatible with John Deere Combine(s) CTS, 9500, 9500 SH, 9600< li>
  • Compatible with John Deere Harvester(s) 6610, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 644G, 770B, 772B, 792DLC, 850C, 892ELC< li>
  • Replaces John Deere OEM number RE36367< li>
  • 8 Plate Oil Cooler< li> < UL> (Part No: 154745)
$290.00
Oil Cooler -
  • For John Deere Construction & industrial models 210L, 210LJ, 310J, 310K, 310SJ, 310SK, 310SL, 315SJ, 325J, 325SL, 410J< li>
  • Replaces John Deere OEM number AT349656< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Core Height: 5-1 4"< li>
  • Core Width: 7-7 8"< li>
  • Core Thickness: 4-3 8"< li>
  • Switch Port: (2) 7 8 Hose; (2) 3 4" SAE< li> < UL> (Part No: 156377)
$360.30
Oil Cooler -
  • For John Deere tractor models 7710 (s n 090000 - later), 7810 (s n 090000 - later)< li>
  • Compatible with John Deere Construction & industrial models 310J, 310SJ, 315SJ, 325J, 410J< li>
  • Replaces John Deere OEM number RE201108, AMRE201108< li>
  • Core Height: 2.9"< li>
  • Core Width: 7.6"< li>
  • Core Thickness: 5"< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 157237)
$331.50
Oil Cooler -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE66573< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 157948)
$545.60
Oil Cooler -
  • For John Deere tractor models 4040, 4040S, 4240, 4240S, 4440< li>
  • Replaces John Deere OEM number AR86211, AMAR86211< li>
  • Core Height: 12"< li>
  • Core Width: 16.3"< li>
  • Core Thickness: 1-3 4"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 158315)
$1485.50
Oil Cooler -
  • For John Deere tractor models 4240, 4440, 4640< li>
  • Replaces John Deere OEM number AR80128< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 158325)
$1069.60
Oil Cooler -
  • For John Deere Construction & industrial models 450J, 550J, 650J< li>
  • Replaces John Deere OEM number AT338499< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160232)
$606.40
Oil Cooler -
  • For John Deere Construction & industrial models 444J, 444K, 524K, 544J, 544K, 624J, 624K, 644J, 644K, 724K< li>
  • Replaces John Deere OEM number AT330592< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160233)
$975.90
Oil Cooler -
  • For John Deere Construction & industrial models 670G, 670GP, 672G, 672GP, 770G, 770GP, 772G, 772GP, 870G, 870GP, 872G, 872GP< li>
  • Replaces John Deere OEM number AT393828< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160235)
$1800.00
Oil Cooler -
  • For John Deere Construction & industrial models 450J, 550J, 650J< li>
  • Replaces John Deere OEM number AT329148< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160239)
$2064.00
Oil Cooler -
  • For John Deere Construction & industrial models 210C, 482C< li>
  • Replaces John Deere OEM number AT00006< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160246)
$1139.60
Oil Cooler -
  • For John Deere Construction & industrial models 310J, 310SJ, 410J< li>
  • Replaces John Deere OEM number AT318085< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 160247)
$299.60
Oil Cooler -
  • For John Deere tractor models 8560, 8760, 8960< li>
  • Replaces John Deere OEM number RE28762< li>
  • Core Dimensions: 36.5" x 12" x 3"< li>
  • Made in the USA< li> < UL> (Part No: 164489)
$1893.00
Oil Cooler -
  • For John Deere tractor models 5083EN, 5101EN, 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 5625< li>
  • Replaces John Deere OEM number RE212290< li>
  • Core Height: 17"< li>
  • Core Width: 16.7"< li>
  • Core Thickness: 1.75"< li>
  • Made in the USA< li> < UL> (Part No: 164504)
$345.00
Oil Cooler -
  • For John Deere Construction & industrial model 160C LC< li>
  • Replaces John Deere OEM number AP35243< li>
  • Core Dimensions: 25" x 26" x 2.3"< li>
  • Made in the USA< li> < UL> (Part No: 164527)
$2679.60
Oil Cooler -
  • For John Deere tractor models 4500, 4600, 4610, 4700, 4710< li>
  • Replaces John Deere OEM number AM126907, LVA10325< li>
  • Overall Height: 17.72"< li>
  • Overall Width: 12.64"< li>
  • Overall Thickness: 2.0"< li>
  • Core Height: 12.44"< li>
  • Width: 11.02"< li>
  • Thickness: 2.0"< li>
  • Rows: 2< li>
  • Fins Per Inch: 8< li>
  • Mounting Width: 16.69"< li> < UL> (Part No: 165210)
$237.00
Oil Cooler -
  • For John Deere tractor models 7210R, 7230R, 7250R, 7270R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE560274< li>
  • Core Height: 14-1 8"< li>
  • Core Width: 15-1 2"< li>
  • Core Thickness: 4-1 8"< li>
  • Overall Height: 18-1 8"< li>
  • Overall Width: 16-1 4"< li>
  • Fitting Inlet: #12 O-Ring< li>
  • Fitting Outlet: #12 O-Ring< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 165246)
$1470.01
Oil Cooler -
  • For John Deere tractor models 6105M, 6110M, 6110R, 6115M, 6120M, 6120R, 6125M, 6130M, 6130R, 6140M, 6155M< li>
  • Replaces John Deere OEM number AL219711, AL217741< li>
  • Core Length: 17-1 4"< li>
  • Core Height: 19-1 8"< li>
  • Core Thickness: 1-1 8"< li>
  • Overall Length: 21-1 4"< li>
  • Overall Height: 21-3 4"< li>
  • Overall Thickness: 3-1 4"< li>
  • Fitting Inlet: #8 Male Insert O-Ring< li>
  • Fitting Outlet: #6 Male Insert O-Ring< li>
  • Type: Parallel Flow< li> < UL> (Part No: 169691)
$720.00
Oil Cooler - Axle -
  • For John Deere tractor models 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE68972< li>
  • Core Height: 12"< li>
  • Core Width: 29"< li>
  • Core Thickness: 1-1 2"< li>
  • Fitting Inlet: 13 16" - 16 Female< li>
  • Fitting Outlet: 13 16" - 16 Female< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 127369)
$860.30
Oil Cooler - Engine -
  • For John Deere tractor models 755, 855, 955< li>
  • Compatible with John Deere Lawn & Garden(s) F1145, 1420, 1435, 1445< li>
  • Compatible with John Deere Turf Golf(s) 3325, 3365< li>
  • Replaces John Deere OEM number AM101957< li>
  • Core Length: 12"< li>
  • Core Width: 6"< li>
  • Core Depth: 1-3 4"< li>
  • Ports: (2) ORB 13 16"-16< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 127395)
$141.29
Oil Cooler - Engine Oil -
  • For John Deere Construction & industrial models TC44H, TC54H, 444H, 444HLL, 544H, 544HLL< li>
  • Replaces John Deere OEM number AT220514< li>
  • Core Height: 16"< li>
  • Core Width: 34-3 4"< li>
  • Core Thickness: 3"< li>
  • Fitting Inlet: 1" Beaded Tube< li>
  • Fitting Outlet: 1" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152065)
$1125.72
Oil Cooler - Fuel -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510< li>
  • Replaces John Deere OEM number RE50295< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 160225)
$1169.50
Oil Cooler - Hydraulic -
  • For John Deere tractor models 3010 (s n 049999-earlier), 3020 (Syncro all, Powershift s n 109411-later), 4000 (s n 250001-later), 4020 (s n 250001-later)< li>
  • Replaces John Deere OEM number AR44283< li>
  • For tractors with separate oil coolers< li>
  • The application information is based upon the original configuration of the tractor as it was new from the factory. While the serial number will tell you what the tractor came out with originally, many models have already been updated, therefore make sure you know the style of cooler you are dealing with prior to purchasing. Additionally some minor modifications may be necessary when mounting these components on some models. However, these modifications are the same as would be necessary when using genuine OEM parts. < li> < UL> (Part No: 109704)
$600.00
Oil Cooler - Hydraulic -
  • For John Deere tractor models 2155 (s n 716497-later), 2251, 2251N, 2351, 2355 (s n 679781-later), 2355N (s n 716497-later), 2555 (s n 679781-later), 2651, 2755 (s n 679781-later), 2855N (s n 679781-later), 2951, 2955 (s n 679781-later), 3055, 3155 (s n 679781-later), 3255, 3351, 3651< li>
  • Replaces John Deere OEM number AL66517< li>
  • Core Height: 5-1 8"< li>
  • Core Width: 15-3 4"< li>
  • Core Thickness: 1-7 8"< li>
  • Overall Height: 7-1 8"< li>
  • Overall Width: 19-3 4"< li>
  • Fitting Inlet: 3 4" Beaded Tube< li>
  • Fitting Outlet: 3 4" Beaded Tube< li> < UL> (Part No: 127365)
$820.00
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial models 410B, 410C, 510B, 510C< li>
  • Replaces John Deere OEM number AT100980, AT69015< li>
  • Core Height: 23"< li>
  • Core Width: 19-3 8"< li>
  • Core Depth: 2-3 8"< li>
  • Fitting Inlet: (2) 3 4" Beaded Tube< li>
  • Fitting Outlet: (4) 1 2" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 127368)
$1032.01
Oil Cooler - Hydraulic -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4955, 4960< li>
  • Replaces John Deere OEM number AR96902< li>
  • Core Height: 22"< li>
  • Core Width: 20-1 2"< li>
  • Core Thickness: 1-1 2"< li>
  • Fitting Inlet: 1-1 16" - 12 Thread, SAE 3 4" Flare 37°< li>
  • Fitting Outlet: 3 4" Beaded Tube< li> < UL> (Part No: 128195)
$560.00
Oil Cooler - Hydraulic -
  • For John Deere tractor models 8120, 8120T, 8220, 8220T, 8320, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number RE221652, RE183330< li>
  • Core Height: 13-1 2"< li>
  • Core Width: 21-7 16"< li>
  • Core Thickness: 3"< li>
  • Fitting Inlet: 1-3 16" - 12 ORS< li>
  • Core Outlet: 1-3 16" - 12 ORS< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128207)
$1270.00
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial models 450G, 455G, 550G, 555G, 650G< li>
  • Replaces John Deere OEM number AT113270< li>
  • Core Height: 8"< li>
  • Core Width: 12-15 16"< li>
  • Core Thickness: 1-3 4"< li>
  • Fitting Inlet: 3 4" Beaded Tube< li>
  • Fitting Outlet: 3 4" Beaded Tube< li> < UL> (Part No: 128221)
$1022.07
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial models 410D, 510D< li>
  • Replaces John Deere OEM number AT169357< li>
  • Core Height: 24"< li>
  • Core Width: 19-3 4"< li>
  • Core Thickness: 2-3 8"< li>
  • Fitting Inlet: (5) 2 3" Beaded Tube< li>
  • Fitting Outlet: 5 8" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128226)
$1639.42
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial models 210LE, 300D, 310D, 315D< li>
  • Replaces John Deere OEM number AT141197< li>
  • Core Height: 19-1 4"< li>
  • Core Width: 23"< li>
  • Core Thickness: 2-3 8"< li>
  • Fitting Inlet: 5 8" Beaded Tube< li>
  • Fitting Outlet: 1 2" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128231)
$906.70
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial model 690ELC< li>
  • Replaces John Deere OEM number AT152152< li>
  • Core Height: 29"< li>
  • Core Width: 24-5 8"< li>
  • Core Thickness: 2-3 8"< li>
  • Fitting Inlet: 1-1 4" Hose Bead< li>
  • Fitting Outlet: 1-1 4" Hose Bead< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152069)
$1813.90
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial models TC62H, 624H, 624HLL< li>
  • Replaces John Deere OEM number AT210386< li>
  • Core Height: 16"< li>
  • Core Width: 28"< li>
  • Core Thickness: 1-1 2"< li>
  • Fitting Inlet: 3 4" Beaded Tube< li>
  • Fitting Outlet: 3 4" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152070)
$860.30
Oil Cooler - Hydraulic -
  • For John Deere Construction & industrial models 310C, 315C, 315CH< li>
  • Replaces John Deere OEM number AT135264, AT113840< li>
  • Core Height: 23"< li>
  • Core Width: 19-1 4"< li>
  • Depth: 2-3 8"< li>
  • Fitting Inlet: (2) 5 8" Beaded Tube< li>
  • Fitting Outlet: (4) 1 2" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156372)
$1022.10
Oil Cooler - Hydraulic -
  • For John Deere tractor models 7200R (s n 080000-earlier), 7215R (s n 080000-earlier), 7230R (s n 080000-earlier), 7260R (s n 080000-earlier), 7280R (s n 080000-earlier)< li>
  • Replaces John Deere OEM number RE566107< li>
  • Core Height: 13"< li>
  • Core Width: 18-11 16"< li>
  • Core Thickness: 3"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156770)
$930.00
Oil Cooler - Hydraulic -
  • For John Deere tractor models 4120, 4320, 4520, 4720< li>
  • Replaces John Deere OEM number LVA15102< li>
  • Core Height: 14-1 2"< li>
  • Core Width: 16"< li>
  • Core Thickness: 1-5 32"< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 157241)
$335.00
Oil Cooler - Hydraulic -
  • For John Deere tractor models 5085E, 5085M, 5100E, 5100M, 5100MH, 5115M, 6100D, 6110D, 6115D, 6125D, 6130D, 6140D< li>
  • Replaces John Deere OEM number SJ26167, SJ11173< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Core Height: 16-1 4"< li>
  • Core Width: 6-3 4"< li>
  • Core Thickness: 1-3 4"< li>
  • Overall Height: 20-1 4"< li>
  • Overall Width: 8-1 4"< li>
  • Overall Thickness: 2-1 4"< li>
  • Fitting Inlet: 1 4"< li>
  • Fitting Outlet: 1 4"< li> < UL> (Part No: 157242)
$360.00
Oil Cooler - Hydraulic -
  • For John Deere tractor models 7200R, 7215R, 7230R, 7260R, 7280R< li>
  • Replaces John Deere OEM number RE332816, RE566094< li>
  • Core Height: 18-3 4"< li>
  • Core Width: 10-1 2"< li>
  • Core Thickness: 3"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160214)
$753.60
Oil Cooler - Hydraulic -
  • For John Deere tractor models 7720, 7820, 7920< li>
  • Compatible with John Deere Construction & industrial models 750CII, 850CII< li>
  • Replaces John Deere OEM number AT222963< li>
  • Core Height: 8"< li>
  • Core Width: 13"< li>
  • Core Thickness: 1-3 4"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160216)
$484.90
Oil Cooler - Hydraulic -
  • For John Deere tractor models 9300T, 9400T< li>
  • Replaces John Deere OEM number RE167950< li>
  • Core Height: 25"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3"< li>
  • Overall Height: 26.4"< li>
  • Overall Width: 44-1 4"< li>
  • Overall Thickness: 5-1 4"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160227)
$3633.90
Oil Cooler - Hydraulic -
  • For John Deere tractor models 9300T, 9400T< li>
  • Replaces John Deere OEM number RE162977< li>
  • Core Height: 10"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3.1"< li>
  • Made in the USA< li> < UL> (Part No: 164500)
$1224.30
Oil Cooler - Hydraulic -
  • For John Deere tractor models 3033R, 3038R, 3039R, 3045R, 3046R, 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4066M, 4066R< li>
  • Replaces John Deere OEM number LVA17864< li>
  • Core Height: 16"< li>
  • Core Width: 14-1 2"< li>
  • Core Thickness: 1-1 8"< li>
  • Fitting Inlet: 13 16-16 ORS< li>
  • Fitting Outlet: 13 16-16 ORS< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 169872)
$307.01
Oil Cooler - Hydraulic / Transmission -
  • For John Deere tractor models 9100, 9200, 9300, 9400< li>
  • Replaces John Deere OEM number RE61923< li>
  • Core Height: 24"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3"< li>
  • Made in the USA< li> < UL> (Part No: 164496)
$2225.00
Oil Cooler - Hydraulic / Transmission -
  • For John Deere tractor models 9300T, 9400T (s n 902087-earlier)< li>
  • Replaces John Deere OEM number RE162979< li>
  • Core Height: 25"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3"< li>
  • Made in the USA< li> < UL> (Part No: 164501)
$2595.00
Oil Cooler - Hydraulic / Transmission -
  • For John Deere tractor models 8560, 8570, 8760, 8870< li>
  • Replaces John Deere OEM number RE53816< li>
  • Core Height: 12"< li>
  • Core Width: 36-1 5"< li>
  • Core Thickness: 3-1 8"< li> < UL> (Part No: 169867)
$2975.00
Oil Cooler - Hydraulic/Transmission -
  • For John Deere Construction & industrial models 410D, 510D< li>
  • Replaces John Deere OEM number AT149850< li>
  • Core Height: 23"< li>
  • Core Width: 19-1 4"< li>
  • Core Thickness: 2-3 8"< li>
  • Fitting Inlet: (2) 3 4" Beaded Tube< li>
  • Fitting Outlet: (4) 1 2" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 128222)
$1522.63
Oil Cooler - Hydraulic/Transmission -
  • For John Deere Construction & industrial models 444D, 544D, 644D< li>
  • Replaces John Deere OEM number AT81814< li>
  • Core Height: 27"< li>
  • Core Width: 27-5 8"< li>
  • Core Thickness: 2-3 8"< li>
  • Fitting Inlet: 3 4" Hose Bead< li>
  • Fitting Outlet: 3 4" Hose Bead< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152071)
$1471.01
Oil Cooler - Hydraulic/Transmission -
  • For John Deere Construction & industrial models TC44H, TC54H, 444H, 444HLL, 544H, 544HLL< li>
  • Replaces John Deere OEM number AT221009< li>
  • Core Height: 16"< li>
  • Core Width: 34-3 4"< li>
  • Core Thickness: 3-1 16"< li>
  • Fitting Inlet: 1" Beaded Tube< li>
  • Fitting Outlet: 1" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152075)
$1388.00
Oil Cooler - Hydraulic/Transmission -
  • For John Deere tractor models 9320, 9420< li>
  • Replaces John Deere OEM number RE172500< li>
  • Core Height: 35"< li>
  • Core Width: 36"< li>
  • Core Thickness: 3-1 8"< li> < UL> (Part No: 169722)
$3825.00
Oil Cooler O-Ring -
  • For John Deere tractor models 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7800, 8100, 8300, 8430, 8440, 8450< li>
  • Compatible with John Deere Combine(s) 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9600< li>
  • Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 9940, 9950, 9960, 9965< li>
  • Compatible with John Deere Construction & industrial models 600, 644, 644A, 644C, 644D, 644E, 644ER, 646, 646B, 690, 690A, 690B, 690C, 693C, 740, 740A, 740E, 740G, 748E, 748G, 762A, 762B, 770A, 770B, 770BH, 772B, 772BH, 790D, 792D, 792LC, 850B, 850C, 892E, 892LC< li>
  • Replaces John Deere OEM number R47153, R50420< li>
  • Inside Diameter: .984"< li>
  • Nominal Section: .139"< li>
  • Standard Number Size: 214< li>
  • Durometer: 65< li>
  • Material: H4P< li> < UL> (Part No: 167363)
$1.40
Oil Cooler - PTO -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R< li>
  • Replaces John Deere OEM number RE304630< li>
  • Overall Height: 9"< li>
  • Overall Width: 6-13 16"< li>
  • Overall Thickness: 5"< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 169871)
$1251.01
Oil Cooler - Transmission -
  • For John Deere Construction & industrial models 540E, 540G, 540GII, 540GIII, 548E, 548G, 548GII, 548GIII, 560D, 640E, 640G, 640GII, 648E, 648G, 648GII, 740E, 740G, 748E, 748G, 748GII, 748GIII< li>
  • Replaces John Deere OEM number 180951, AT184041, AT180951< li>
  • Core Height: 8"< li>
  • Core Width: 34-7 8"< li>
  • Core Thickness: 4-5 8"< li>
  • Fitting Inlet: (2) 1-3 16" Thread ORS< li>
  • Fitting Outlet: (2) 3 4" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152061)
$1169.01
Oil Cooler - Transmission -
  • For John Deere tractor models 3032E, 3036E, 3038E< li>
  • Replaces John Deere OEM number LVA15668< li>
  • Core Height: 9"< li>
  • Core Width: 13-1 2"< li>
  • Core Thickness: 3 4"< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 157238)
$96.80
Oil Cooler - Transmission -
  • For John Deere tractor models 9230, 9330, 9430, 9430T, 9530, 9530T, 9630, 9630T< li>
  • Replaces John Deere OEM number RE566106, RE231516< li>
  • Core Height: 16-1 2"< li>
  • Core Width: 23.7"< li>
  • Core Thickness: 3"< li>
  • Made in the USA and manufactured to exact OEM specifications< li> < UL> (Part No: 160226)
$1563.70
Oil Cooler - Transmission -
  • For John Deere Construction & industrial models 450G, 455G, 550G, 555G, 650G< li>
  • Replaces John Deere OEM number AT104588< li>
  • Core Height: 4"< li>
  • Core Width: 27-3 4"< li>
  • Core Thickness: 3-1 16"< li>
  • Fitting Inlet: 1-3 16" - 12< li>
  • Fitting Outlet: 1-3 16" -12< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160234)
$1397.07
Oil Cooler with Gasket -
  • For John Deere tractor models 2355, 2555, 2755, 2855N, 3155, 4050, 4250, 4450, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6600< li>
  • Compatible with John Deere Combine(s) 1165, 1175H4< li>
  • Replaces John Deere OEM number RE61769< li> < UL> (Part No: 167502)
$250.00
Oil Dipstick - 10.63" long, .63" dia. For tractor models 1020, 1030, 1130, 1520, 1530, 1630, (1640, 2040S, 2140 SN# 430000 and up), 1830, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2270, 2280, 2320, 2355, 2420, 2440, 2520, 2555, 2755, 2840, 2940, 2950, (2955 SN# up to 765516), 300B, 301A, 3055, 3150, (3155 SN# up to 738221), 3255, 410, 820, 830, 920, 930, JD24, JD301. (Part No: 121171)		$7.96
Oil Fill Breather Cap - Original-style oil fill breather cap for John Deere models M, MT, 40, 320, 330, 420, 430, and 1010. This cap is 1-1 2" tall and has "OIL" imprinted on the top of it. (Part No: 110063)		$46.26
Oil Fill Breather Cap - With clip, copper filter. 3 1 4 inches tall. For tractor models L, LA, LI, M, MC, MI, 40, 320, 330, 420, 430, 440 gas. Fits over 1 1 2 inch pipe. Exact of original, "OIL" stamped into top. (Part No: 107000)$48.10
Oil Filler Cap - Block -
  • For John Deere tractor models 1640, 2040, 2040S, 2141, 2150, 2155, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2750, 2755, 2940, 2950, 2955, 3040, 3055, 3141, 3150, 3155< li>
  • Replaces John Deere OEM number R80136< li> < UL> (Part No: 158211)
$5.00
Oil Filter - Oil filter element, spin-on type. For tractor models 4040, 4230 diesel, 4240, 4320, 4430, 4400, 4520, 4620, 4630, 4640, 4880, 6030(6531A), 7020, 7520, 8430, 8440, 8630. Combines: 6600 Hill Side(6404TH), 6602(6404DH), 6620, 6622, 7700 (6404DH and TH), 7720, 882 For 4000, 4010, 4020 (Part No: 111131)		$21.50
Oil Filter - Oil filter element, spin-on type, 7 height, 5 outside diameter, 1-1 2-12 thread. For 6076T(7.6 liter) engines in tractors: 4055, 4255, 4455, 7700, 7800, 8100, 8200, 8300, 8560~ Combines: 9500, 9600. Replaces AR98329, AR101278, RE46380. For 4050, 4055, 4250, 4255, 4440, 4450, 4455, 4640, 4650, 4840, 4850, 6620, 6622, 7700, 7720, 7800, 8100, 8200, 8300, 8430, 8450, 8560, 8820, 9500, 9600 (Part No: 111130)		$24.99
Oil Filter - For tractor models H, M, (1010, 2010 SN# up to 42000), (320, 330, 40, 420, 430, 440, 45, 55, 95. Replaces, AH1082R, AH812R, AH1111RT. (Part No: 118529)		$12.25
Oil Filter - Oil filter element, cartridge type 6-7 16" Tall, 3-1 8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Part No: 109417)		$10.60
Oil Filter, Spin On - 3.75" tall. For tractor models 650, 750, 850, 855, 856, 950, 1050. (Part No: 181960)$6.66
Oil Filter, Spin On - This Filter replaces the following B50, 74512207, 1069954M92, 104397A, 1032015M91, 1025034M91, 928055, HMF600L04340, 7000014641, 70000-14641, 4512207, 160770AS, 538836R1, 51051. Measures 3-11 16 inch outside diameter, 5-3 8 inch long, 5 8 inch number 16 thread. (Part No: 113613)$9.05
Oil Filter, Spin On - Spin on style oil filter measures with dimensions of 5 13 32 inches in length, 3 11 16 inches O.D. Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Part No: 118399)		$14.99
Oil Filter, Spin-On Type - This oil filter measures 3 11 16 inches outside diameter, 5 13 16 in length and is 13 16 16 thread. For Cotton Pickers Strippers: 482, 484, 9900, 9910. For 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2240, 2250, 2255, 2270, 2280, 2350, 2355, 2420, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3300, 4030, 4400, 4420, 482, 484, 6600, 6602, 7700, 9900, 9910. Replaces BT259 , T19044T , TPT19044 , T19044 , AR58956 , 7000014640 , 70000-14640 , 6511730 , A18A303 , A-18A303 , 720801, WIX 51243. (Part No: 111133)		$8.60
Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3 8 inch NPT male fitting. Dipstick is 4.91 inches long. For model early model A series, B, (late model D, DI, W111, W113), G series, H series, R, 50, 60, 70. Originally used as an aftermarket product in the 1940's. (Part No: 1998TA-New)$46.50
Oil Line -
  • For John Deere tractor model 3010 (Row Crop and Standard, Rear RH-Outer)< li>
  • Replaces John Deere OEM number AR26961< li>
  • For Rear RH, Inner use Item #: 160545< li> < UL> (Part No: 160544)
$70.07
Oil Line -
  • For John Deere tractor model 3010 (Row Crop And Standard, Rear RH-Inner)< li>
  • Replaces John Deere OEM number AR26962< li>
  • For Rear RH, Outer use Item #: 160544< li> < UL> (Part No: 160545)
$44.26
Oil Line, Rear LH, Inner - Dual selective control. For tractor models 3010 row crop and standard. (Part No: 160547)		$93.00
Oil Line, Rear LH, Inner - Dual selective control. For model 3020 SN# up to 122999 powershift row crop and standard. (Part No: 160551)		$155.00
Oil Line, Rear LH, Inner - Dual selective control. For model 3020 SN# up to 122999 syncro row crop and standard. $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 160555)		$128.00
Oil Line, Rear LH, Inner - Dual selective control. For model 4010. (Part No: 160543)		$115.50
Oil Line, Rear LH, Inner - Dual selective control. For tractor models (4020, 600 up to SN# 200999 powershift). (Part No: 160548)		$108.00
Oil Line, Rear LH, Inner - Dual selective control. For tractor models (4020, 600 up to SN# 200999 syncro range). $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 160558)		$68.30
Oil Line, Rear LH, Inner - For tractor models (4020, 600 up to SN# 200999 syncro range). Replaces AR32653. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 160562)		$92.40
Oil Line, Rear LH, Outer - Dual selective control. For model 3010 row crop and standard. (Part No: 160546)		$98.70
Oil Line, Rear LH, Outer - Dual selective control. For model 3020 up to SN# 122999 powershift row crop or standard. There is an addtional $15 shipping for this part due to the size of the package. This will be included in the shipping total of the order. (Part No: 160552)		$156.00
Oil Line, Rear LH, Outer - Dual selective control. For model 3020 SN# up to 122999 syncro row crop and standard. (Part No: 160556)		$119.70
Oil Line, Rear LH, Outer - Dual selective control. For model 4010. (Part No: 160542)		$95.60
Oil Line, Rear LH, Outer - Dual selective control. For tractor models (4020, 600 up to SN# 200999 powershift). This part requires $15 additional shipping due to the size of the package. This will appear as part of the shipping total for the order. (Part No: 160549)		$97.60
Oil Line, Rear LH, Outer - Dual selective control. For tractor models (4020, 600 up to SN# 200999 syncro range). Due to the size of the package, $35 additional shipping is required on this item. This will appear in your shipping total. (Part No: 160557)		$71.00
Oil Line. Rear LH, Outer - For tractor models (4020, 600 up to SN# 200999 syncro range). Replaces AR32652. $8 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 160561)		$98.00
Oil Line, Rear RH, Inner - For model 4010. (Part No: 160541)		$113.00
Oil Line, Rear RH, Inner - For tractor models (4020, 600 SN# up to 200999 powershift). Replaces AR32311. (Part No: 160560)		$110.00
Oil Line, Rear RH, Inner - For model 3020 up to SN# 122999 syncro Row crop and Std. Due to the size of this part, there is $25 addtional shipping. This will appear as part of the shipping total of your order. (Part No: 160554)		$121.00
Oil Line, Rear RH, Outer - For model 3020 up to SN# 122999 syncro row crop and standard. (Part No: 160553)		$119.00
Oil Line, Rear RH, Outer - For model 4010. (Part No: 160540)		$89.30
Oil Line, Rear RH, Outer - For tractor models (4020, 600 SN# up to 200999 powershift). Replaces AR32312. (Part No: 160559)		$92.00
Oil Pan Drain Plug -
  • For John Deere tractor models 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8560, 8760, 8770, 8870< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5720, 5730, 9940, 9950, 9960, 9965, 9970< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500C, 510, 540E, 540G, 548E, 548G, 600, 640E, 640G, 644, 644A, 644C, 644D, 644E, 644ER, 644G, 646, 646C, 648E, 648G, 690, 690A, 690B, 690C, 690CR, 693B, 693C, 700A, 740, 740A, 740E, 740G, 743, 743A, 744E, 748E, 748G, 760, 760A, 762A, 762B, 770A, 770B, 772A, 772B, 790, 790D, 792, 844, 850, 850B, 850C, 855, 860A, 862, 862B, 890, 890A, 892ELC< li>
  • Replaces John Deere OEM number R26727, R51944< li>
  • 1-1 4 NS< li> < UL> (Part No: 165135)
$16.00
Oil Plug Gasket, 10 Pack -
  • For John Deere tractor models M, MC, MT, 40, 420, 430, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2440, 2510, 2520, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3150, 4555, 4650, 4850, 4955< li>
  • Replaces John Deere OEM number R120247< li> < UL> (Part No: 176719)
$5.00
Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. Note, there are a couple different styles of this part that work equally well, but are cosmetically different. Yours may arrive looking different than the one shown. Replaces AF3882R, AR27977, AT85174 (Part No: 121439)		$8.40
Oil Pump - Crankshaft driven. Marked R62946, R504028, R124328, R132716 or R74215. For tractor models 4050, 4240, 4250, 4440, 4450, 4555, 4640, 4755, 4840, 4955, (6030 engine SN# 628711 and up), 644C, 646C, 690C, 7520, 762B, 770A, 770B, 770BH, 7710, 772A, 772B, 772BH, 7810, 790, 790D, 792, 793D, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8310, 8320, 8400, 8410, 8410T, 8420, 8420T, 8430, 844, 8440, 8450, 850, 850B, 8520, 8520T, 855, 8560, 862B, 8630, 8640, 8650, 8760, 8820, 890A, 9100, 9120, 9500, 9500SH, 9510, 9510SH, 9610, 9650, 9750, 992D, 992E, JD644B, JD762, JD860B. Replaces RE60622, RE44118, AR99339, AR99341, AR96190. Not for Yanmar Engines. (Part No: 114697)		$225.00
Oil Pump - Crankshaft driven. Marked R62946, R504028, R124328, R132716 or R74215. For tractor models 4050, 4240, 4250, 4440, 4450, 4555, 4640, 4755, 4840, 4955, (6030 engine SN# 628711 and up), 644C, 646C, 690C, 7520, 762B, 770A, 770B, 770BH, 7710, 772A, 772B, 772BH, 7810, 790, 790D, 792, 793D, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8310, 8320, 8400, 8410, 8410T, 8420, 8420T, 8430, 844, 8440, 8450, 850, 850B, 8520, 8520T, 855, 8560, 862B, 8630, 8640, 8650, 8760, 8820, 890A, 9100, 9120, 9500, 9500SH, 9510, 9510SH, 9610, 9650, 9750, 992D, 992E, JD644B, JD762, JD860B. Replaces RE60622, RE44118, AR99339, AR99341, AR96190. Not for Yanmar Engine. (Part No: 114697)		$225.00
Oil Pump - For tractor models 850, 950, 1050. Does not come with gasket. Gasket can be ordered as Part Number OPG-3202. (Part No: 182787)$204.92
Oil Pump - For tractor models 650, 750. Gasket part number CH15492 is available separately. (Part No: CH15617)$220.81
Oil Pump - For tractor models (1520 late models less Hi-lo shift), 2130, (2440 SN# up to 340999 less hi-lo shift or reverser), (2630, 2640 all less hi-lo shift or reverser). (Part No: 151862)		$405.00
Oil Pump - This Oil Pump replaces part numbers AL69761, AL 28923, AL39355, AL41639, AL64139. For Models 1040, 1140, 1350, 1550, 1640, 1750, 1850, 1950, 2040, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3140, 840, 940. (Part No: 151861)		$405.00
Oil Pump - This Engine Oil Pump replaces pumps marked R502867, R123179 Or R123179A. Fits John Deere Tractor models: 5210, 5310, 5320N, 5325N, 5403, 5410, 5420, 5420N, 5425, 5425N, 5510, 5520, 5520N, 5525, 5525N, 5605, 5615, 5705, 5715, 6110, 6110L, 6120, 6120L, 6210, 6210L, 6215, 6220, 6220L, 6310, 6310L, 6310S, 6320, 6320L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6420S, 6510L, 6510S, 6520L, 6603, 6605, 6615, 6715, 7210, 7220, 7320, 7405, 7420, 7505, 7515, 7520, 7610, 7710, 7720, 7810, 7815, 7820, 7920. Replaces RE70153, RE502269, RE59582, SE501814 (Part No: 123955)		$178.99
Oil Pump - With Tube for 2510, 1020, 1520, 2020, 2520, 1530, 2030, 4030, 2440, 2840, 2940, 820 German, 830, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 2755. Engine Oil Pump Kit contains: Pump Boby, Driven Gear & Shaft, Driven Gear, and Rear Cover. Replaces OEM# RE35685. (Part No: 114022)		$69.00
Oil Pump - For 340D, 344E, 440C, 440D, 444E, 448D, 490, 490E, 540B, 540D, 540E, 548D, 548E, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 650G, (4-2391, 4-239t, 4-276t, 4045, 6-359D, 6-359T ALL DIESEL ENGINE. PLEASE NOTE: If replacing a pump with an o-ring style pressure line, you will also need to replace the oil tube and fittings. For blocks marked R108755, use R112867 tube, R112864 fitting & R97185 O-ring. For 490 excavator and OEM engines 4.239A, 4.239D, 4.239T, 6.359D, 6.359T, use R79564 tube, R79562 fitting, and R79563 sleeve. All other Blocks use R79561 tube R79562 Sleeve, and R79560 adapter. Consult your dealer for the above parts. (Part No: 113243)		$135.00
Oil Pump - For 1020, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2270, 2280, 2320, 2350, 2355, 2420, 2440, 2510, 2520, 2730, 2750, 2850, 2940, 300, 300A, 300B, 301, 301A, 302, 302A, 310. Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Part No: 114022)		$69.00
Oil Pump - For 3300, 350A, 350B, 350C, 350D, 400, 401, 401A, 410, 440, 440A, 440B, 4400, 450, 450A, 450B, 480, 480A, 499, 5000, 5200, 5300, 5400, 5400N, 5500, 6602, 6620, 820, 830, (3164D, 3179, 4039D, 4039T, 4219DF, 4239D, 4239T, 6059D, 6059T, 6329D, 6359D, 6359T, ALL DIESEL ENGINES). Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Part No: 114022)		$69.00
Oil Pump -
  • For John Deere tractor models 7600, 7700, 7800, 8100 (s n 009999-earlier), 8100, 8200 (s n 009999-earlier), 8200, 8300 (s n 009999-earlier), 8300, 8400, 8570< li>
  • Compatible with John Deere Combine(s) CTS (s n 009999-later), 9500, 9600 (s n 009999-later)< li>
  • Compatible with John Deere Harvester(s) 6610, 6710, 6810, 6910< li>
  • Replaces John Deere OEM number RE507074< li>
  • All with Late 6076 Engine< li>
  • For Replacement Gasket use Item #: 117407< li> < UL> (Part No: 128022)
$290.00
Oil Pump Drive Gear - Late style without keyway. FOr Models: 3010, 3020, 500, 500A, 500B, 500C, 4000, 4020, 4010, 600, JD600, JD500, JD500A, JD500B, 6600, 7700. (Part No: 156260)$204.00
Oil Pump Drive Gear - For 1020, 1520, 1530, 2020, 2030, 2040, 2144, 2240, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255, 4030, 4050, 7200, 7400, 7600, 820, 830. Oil Pump Drive Gear. (Part No: 121172)		$138.00
Oil Pump Drive Gear - For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255, 4030, 4050, 7200, 7400, 7600, 820, 830. Oil Pump Drive Gear has 33 Tooth, 3.625 O.D., .550" I.D. (Part No: 121172)		$138.00
Oil Pump Drive Gear and Shaft -
  • For John Deere tractor models 4040, 4230, 4240, 4320, 4430, 4440, 4630, 4640, 4840, 7020 (late), 8430 (1974-1981, 4WD), 8440, 8640< li>
  • Compatible with John Deere Combine(s) 985, 1085 (s n 041200-earlier), 6600 (s n 156500-later), 6602 (s n 1500-later), 6620, 6622 (early), 7700 (s n 8000-later), 7720 (early), 8820 (early)< li>
  • Compatible with John Deere Harvester(s) 5200 (late), 5400, 5420, 5440, 5460, 9940 (early)< li>
  • Compatible with John Deere Construction & industrial models 644A, 646, 646B (early), 690, 690A, 690B, 693B, 740, 740A (early), 743, 743A (early)< li>
  • Compatible with John Deere Engine(s) 6404A (R 01, 02, 14, 15 (7020), 6404A (R 10, 11, 12, 13 (4630), 6404T (R 07, 09, 16, 17 (4430), 6466A (s n 067685-later), 6466D (s n 067685-later), 6466T (s n 067685-later)< li>
  • Replaces John Deere OEM number R64568< li>
  • Includes gear and shaft< li> < UL> (Part No: 157574)
$112.00
Oil Pump Drive Shaft Coupling - For tractor models A series after sn 424025, B series, G series, 50, 60, 70 gas, 520, 530, 620, 630, 720 gas, 730 gas. (Part No: 182803)		$24.00
Oil Pump Gasket - Used with CH15617 Oil Pump (Part No: CH15492)		$2.25
Oil Pump Intake - For tractor models 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4755. (Part No: 117406)		$35.70
Oil Pump Intake -
  • For John Deere tractor models 820 (s n 172482 - later), 840, 920 (s n 172482 - later), 930, 940, 1020, 1040, 1120, 1140, 1350, 1520, 1530, 1550, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2350, 2355, 2355N, 2440, 2510, 2520, 2555, 2650, 2750, 2755, 2850, 2855N, 5500< li>
  • Compatible with John Deere Construction & industrial models 210C, 300 (s n 164965 - later), 300B, 301 (s n 164965 - later), 301A, 302, 302A, 310, 310B, 310D, 315C, 315D, 350B (s n 165107 - later), 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 415B, 450B, 450C, 450D, 455D, 480B, 480C, 482C< li>
  • Replaces John Deere OEM number RE36425, AR60701< li> < UL> (Part No: 158276)
$73.00
Oil Pump Intake Gasket -
  • For John Deere tractor models 810, 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 6030, 7520, 7820, 7920, 8100, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8560, 8630, 8760, 9100, 9120< li>
  • Replaces John Deere OEM number R100569< li> < UL> (Part No: 117407)
$1.26
Oil Pump, RE65580 -
  • For John Deere tractor models 6506, 6600, 6800, 6900< li>
  • Compatible with John Deere Combine(s) 2054, 2056, 2058, 2254, 2256, 2258< li>
  • Compatible with John Deere Construction & industrial models 544B, 544C, 544D, 544E, 544G, 624E, 624G, 643, 643D, 670A, 670B, 672, 672A, 672B< li>
  • Compatible with John Deere Engine(s) 6059DF092 (s n 100000-499999)< li>
  • Replaces John Deere OEM number RE65580< li> < UL> (Part No: 155318)
$194.00
Oil Pump Tube -
  • For John Deere tractor models 820 (s n 031310 - later), 830, 920, 930, 940, 1020 (Gas s n 023249 - later, Diesel s n 023689 - later), 1030, 1040, 1120, 1130, 1140, 1350, 1520 (Gas s n 023249 - later, Diesel s n 023689 - later), 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 1950N, 2020 (Gas s n 023249 - later, Diesel s n 023689 - later), 2030, 2040, 2040S, 2120, 2140, 2150, 2155 (s n 957545 - earlier), 2240, 2255, 2350, 2355 (s n 957545 - earlier), 2355N (s n 957545 - earlier), 2510 (Gas s n 082858 - later, Diesel s n 082721 - later), 2520, 2550, 2555 (s n 957545 - earlier), 2650, 2650N, 2750, 2755 (s n 957545 - earlier), 2840, 2850, 2855N (s n 957545 - earlier), 2940, 2950, 2955 (s n 957545 - earlier), 3030, 3050, 3055 (s n 957545 - earlier), 3120, 3130, 3150, 3155 (s n 957545 - earlier), 3255 (s n 957545 - earlier), 3350, 3650, 4030, 5200 (s n 106773 - earlier), 5300 (s n 106773 - earlier), 5400 (s n 106773 - earlier)< li>
  • Compatible with John Deere Construction & industrial models 210C, 300 (Gas s n 23037 - later, Diesel s n 23155 - later), 300B, 301A, 302, 310, 310A, 310B, 310C, 310D, 315D, 350B, 350C, 350D, 355D, 380, 400 (Gas s n 23037 - later, Diesel s n 23155 - later), 400G, 401, 401B, 401C, 401D, 415B, 450 (s n 22565 - later), 450B, 450C, 450D, 455D, 480 (Gas s n 23759 - later, Diesel s n 22937 - later), 480A, 480B, 480C, 482C, 515B< li>
  • Replaces John Deere OEM number T20050< li> < UL> (Part No: 158407)
$12.76
Oil Pump Tube -
  • For John Deere tractor models 820, 920, 1020, 1030, 1040, 1130, 1140, 1420, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, 2950, 2955, 3040, 3050, 3055, 3140, 3155, 3255, 3650, 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5500, 6200, 6200L, 6300, 6300L< li>
  • Compatible with John Deere Construction & industrial models 210C, 300, 300B, 301A, 302, 302A, 310, 310B, 310C, 310D, 315C, 350A, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 415B, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 482C< li>
  • Replaces John Deere OEM number R113752< li> < UL> (Part No: 158408)
$12.76
O-Ring -
  • For John Deere tractor models 820 (s n 172492 - later), 840, 920 (s n 172492 - later), 930, 940, 1020, 1040, 1120, 1140, 1350, 1520, 1530, 1550, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2850, 2855N, 5500< li>
  • Compatible with John Deere Construction & industrial models 210C, 300 (s n 164965 - later), 300B, 301 (s n 164965 - later), 301A, 302A, 310 (s n 164965 - later), 310, 310B, 310C, 310D, 315C, 315D, 350B (s n 164965 - later), 380, 400, 400G, 401, 401B, 401C, 401D, 450, 450A, 450B, 450C, 450D, 455D, 480, 480B, 480C, 482C< li>
  • Replaces John Deere OEM number R61871< li> < UL> (Part No: 158410)
$1.26
O-Ring -
  • For John Deere tractor models 820 (s n 031310 - later), 830, 920, 940, 1020 (Gas s n 023249 - later, Diesel s n 023689 - later), 1030, 1040, 1120, 1130, 1140, 1520 (Gas s n 023249 - later, Diesel s n 023689 - later), 1530, 1550, 1630, 1750, 1850, 1950, 1950N, 2040, 2150, 2155 (s n 957545 - earlier), 2240, 2255, 2355N (s n 957545 - earlier), 2840, 2940, 2950, 2955 (s n 957545 - earlier), 3030, 3040, 3050, 3055 (s n 957545 - earlier), 3120, 3130, 3140, 3150, 3155 (s n 957545 - earlier), 3255 (s n 957545 - earlier), 3350, 3650, 4030, 5200 (s n 106773 - earlier), 5300 (s n 106773 - earlier), 5400 (s n 106773 - earlier)< li>
  • Compatible with John Deere Construction & industrial models 300 (Gas s n 23037 - later, Diesel s n 23155 - later), 300B, 301A, 302, 310, 350B, 350C, 350D, 355D, 380< li>
  • Replaces John Deere OEM number R74354< li> < UL> (Part No: 158411)
$1.26
Transmission Oil Cooler -
  • For John Deere Construction & industrial models 544E, 544E LL, 544E TC, 544G, 544G LL, 544G TC, 624E, 624G< li>
  • Replaces John Deere OEM number AT102874< li>
  • Core Height: 16"< li>
  • Core Width: 34"< li>
  • Core Thickness: 3-1 16"< li>
  • Fitting Inlet: (2) 3 4" Beaded Tube< li>
  • Fitting Outlet: (2) 3 4" Beaded Tube< li>
  • Made in the USA and manufactured to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 152066)
$1365.00
Transmission Oil Cooler -
  • For John Deere Construction & industrial models 450G, 455G, 550G, 555G, 650G< li>
  • Replaces John Deere OEM number AT140588< li>
  • Core Height: 27-3 4"< li>
  • Core Width: 4"< li>
  • Depth: 3-1 16"< li> < UL> (Part No: 152076)
$1500.00
 
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: 183950)		$25.26
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244)$6.00
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244)$6.00
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102408)$37.00
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102407)$14.70
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100116)$36.70
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100115)$14.70
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100114)$6.30
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100121)$14.70
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: 100120)$6.10
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108348)$18.00
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108346)$60.00
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108344)$8.90
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102411)$42.80
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102410)$15.80
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102409)$6.00
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100119)$34.00
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100118)$14.70
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100253)$6.00
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 184741)$63.05
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$68.39
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$99.22
 
PTO / Driveline
Adaptor - PTO Splined Adaptor and reducer. 1-3 4 female(6 spline) to 1-3 8 male(6 spline), 6-1 2 long. Extends PTO 4-3 4. Special for John Deere model G tractors. For G (Part No: 112193)$131.00
Back-Up Ring -
  • For John Deere tractor models 4000 (s n 250001-later), 4020 (s n 250001-later), 4040, 4230, 4240, 4320, 4430, 4440, 4455< li>
  • Replaces John Deere OEM number R53177< li> < UL> (Part No: 176694)
$3.20
Bearing Housing, without Bearing - For tractor models 820, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, (2240 SN# up to 349999), 2440, 2630, 2640. (Part No: 170410)		$202.00
Bearing Race - Replaces JD10283. Inside diameter is 1.181", outside diameter 1.602", width is .748". For tractor models 3120, 300, 301, 400, 401, 500, 600, 1020, 1120, 1520, 2020, 2030, 2120, 2140, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450 and 4455 (Part No: 111372)$10.30
Brake Plate, (PTO) - With facing. For tractor models 50, 60, 70, 520, 530. Replaces RE20726. (Part No: 125609)		$39.95
Brake Plate, (PTO) - With facing. For tractor models 80, 620, 630, 720, 730, 820, 830. Replaces RE20727. (Part No: 125610)$39.95
Bushing, Front Drawbar Support -
  • For John Deere tractor models 8100 (s n 010000-later), 8100T, 8110, 8110T, 8120, 8120T, 8200 (s n 010000-later), 8200T, 8210, 8210T, 8220, 8220T, 8300 (s n 010000-later), 8300T, 8310, 8310T, 8320, 8320T, 8400 (s n 010000-later), 8400T, 8410, 8420, 8420T< li>
  • Replaces John Deere OEM number R130953< li> < UL> (Part No: 170421)
$23.00
Bushing, Quick Hitch -
  • For John Deere tractor models 1023E, 1025R, 2025R, 2032R, 2038R, 2210, 2305, 2320, 2520, 2720, 3025E, 3032E, 3033R, 3038E, 3038R, 3039R, 3045R, 3046R, 3120, 3203, 3320, 3520, 3720, 4000, 4010, 4044M, 4044R, 4049M, 4049R, 4052M, 4052R, 4105, 4110, 4115, 4120, 4200, 4210, 4300, 4310, 4320, 4410, 4510, 4520, 4600, 4610, 4700, 4710, 4720, 5045E, 5055E, 5065E, 5065M, 5075E, 5075M, 5083EN, 5085E, 5085M, 5090M, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5100ML, 5101EN, 5115M, 5115ML< li>
  • Replaces John Deere OEM number LVU15507< li>
  • Inside Diameter: 0.890"< li>
  • Length: 1.969"< li>
  • Outside Diameter: 1.437"< li> < UL> (Part No: 170569)
$20.26
Clutch Disc, (PTO) - With Facing. For tractor models 50 serial number 5032350 and up, 60 serial number 6060700 and up, 70 serial number 7039400 and up, 80, 520, 530, 620, 630, 720, 730, 820, 830. Replaces RE29784. (Part No: 114821)		$15.95
Clutch Disc, (PTO) - For tractor models (50 SN# 5032350 and up), 520, 530, (60 SN# 6060700 and up), 620, 630, (70 SN# 7039400 and up), 720, 730, 80, 820, 830. (Part No: 114821)		$15.95
Clutch Drive Disc (PTO) - 3.375" I.D., 5.625" O.D., .06" thickness, 6 tangs. For tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730. Price is for each, you may need more than one depending on your application. (Part No: 114822)		$10.99
Clutch Drive Disc, (PTO) - For tractor models 80, 820, 830. (Part No: 125615)$16.50
Clutch Drum - This PTO Clutch Drum is used in John Deere Tractors 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960. Replaces drums marked R71231. Replaces original part number AR95409. (Part No: 156690)		$650.00
Clutch Plate, (PTO) - 1.40" I.D., 5.00" O.D. .290" thickness. For tractor models 50 SN# 5032350 and up, 520, 530, 60 SN# 6060700 and up, 620, 630, 70 SN# 7039400 and up, 720, 730, 80, 820, 830. (Part No: 110325)		$25.95
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-3 8 inch round bore with 1 2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3 4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1 16 inch) bearing diameter x 74.6 mm 2.940 (2-15 16 inch) overall length (43-3 4 inch). Verify length before ordering. (Part No: 180775)		$206.00
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 inch 6 spline Q.D. tractor yoke, 1-3 8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3 4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1 16 inch) bearing diameter x 74.6 mm 2.940 (2-15 16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: 124815)		$295.00
Independent PTO Clutch Plate -
  • For John Deere tractor models 4430 (s n 044988-earlier), 4520 (With Powershift), 4620 (With Powershift), 4630 (With Powershift), 8430 (1974-1981), 8440, 8630, 8640< li>
  • Replaces John Deere OEM number R46419, R43210< li>
  • O.D.: 7.775"< li>
  • I.D.: 5.430"< li> < UL> (Part No: 117042)
$18.00
Inner PTO Clutch Drum Seal - This inner PTO clutch drum seal has a 1.125 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.250 inch wide. It Fits: R. Replaces: AL2122T, AL2653T, AR608R (Part No: 106846)		$14.26
Needle Bearing - Measures 2.835 inches outside diameter, 1.375 inches inside diameter and is 0.667 inches wide. It is used on; (1010 Inner PTO bearing on models with single speed 540 PTO. 1 used per tractor), (320, 330, 435 Used as an inner PTO bearing), (40 Inner PTO bearing on Hi-Crop and Two Row Utility (W) both up SN: 60001 & up), (430 Inner PTO bearing on Hi-Crop, Industrial, Utility and W), (440 Used as an inner PTO bearing) Replaces: JD7198T (Part No: 150679)		$17.76
Needle Bearing -
  • For John Deere tractor models 1020, 1520, 2020, 2030, 2440 (s n: 340999-earlier), 2510, 2520, 2630, 2640 (s n: 340999-earlier), 3020, 4000, 4020, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 440, 440A, 440B, 500, 500A, 500B, 510, 540, 540A, 600, 644B, 644C, 646C, 760A< li>
  • Compatible with John Deere Lawn & Garden(s) 110 (s n: 3571-earlier), 110 (H, s n: 3571-earlier)< li>
  • Replaces John Deere OEM number 368372R91, A57046, G13604, 18-693, 142090, 18-1643< li> < UL> (Part No: 176563)
$3.50
Planet Pinion Shaft Pin -
  • For John Deere tractor models 740, 770, 4520 (s n 18930-later), 4620, 4630 (s n 18930-later), 4640, 4840< li>
  • Compatible with John Deere Construction & industrial models 740, 743, 760, 770, 770A, 772A< li>
  • Replaces John Deere OEM number R65053, R62533< li>
  • Length: 3.39"< li>
  • Outside Diameter: 0.843"< li> < UL> (Part No: 116836)
$15.00
PTO 3 Bolt Bearing Cover Gasket -
  • For John Deere tractor models 70 (gas diesel s n 7014800-later with engine driven PTO), 520, 530, 620, 630< li>
  • Replaces John Deere OEM number F1542R< li>
  • For PTO Clutch Shaft< li> < UL> (Part No: 125606)
$15.26
PTO Bearing Housing / Quill - This is the Bearing Housing Quill, Rear PTO Shaft used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400. Replaces T22237, R47514 (Part No: 172961)		$206.00
PTO Brake Band - This PRO Brake Band is used on John Deere 1020, 1520, 2020, 830, 930, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 301A, 401B, 401D. Replaces AR58605 and RE44253 (Part No: 163796)		$79.99
PTO Clutch Disc - 45 internal splines, 5.250" O.D.. For tractor models (1020, 1520, 2020, 2640 with hi-lo shift), (1530 SN# xxxxxx and up), (2030, 2630 with hi-lo shift & SN# xxxxxx and up), 2240, (2440, 2640 with ind. 540-1000 PTO & hi-lo trans.), 2940, 2955. Replaces AR78361. (Part No: 127048)		$11.66
PTO Clutch Disc -
  • For John Deere tractor models 420 (s n 100000-later), 430 (s n 100000-later), 435< li>
  • Replaces John Deere OEM number AM3419T, AT141681< li>
  • Diameter: 9"< li>
  • Hub Diameter: 1-3 4"< li>
  • Spline: 27< li>
  • Center: Solid< li>
  • Type: Organic< li> < UL> (Part No: 176328)
$223.00
PTO Clutch Drum Inner Seal - This PTO Clutch Drum Inner Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. [50, 60, 70 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO) ], [ 520, 530, 620, 630, 720, 730 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO. Also used For Dual power control valve control arm seal.) ], [ 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Used For Dual power control valve control arm seal.)]; Replaces: AA5247R, AR1355R, AT11492, RE14867. (Part No: 165141)$5.16
PTO Clutch Plate - 5.20" O.D., 3.903" I.D., .179" thick. For tractor models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. AL23113, AT32058. (Part No: 127061)		$22.00
PTO Disc -
  • For John Deere tractor models 3010, 3020< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Replaces John Deere OEM number RE29610, AR26840< li>
  • Size: 10"< li>
  • Hub: 1-11 16"< li>
  • Spline: 26< li>
  • Center: Solid< li>
  • Type: Woven< li>
  • For a Remanufactured version of this sku use Item #: 205874< li> < UL> (Part No: 114017)
$91.00
PTO Disc, 8.875 - Torsion damp, spline dia. 1.496", 23 spline. For tractor models (1020 with cont. driven PTO or vineyard, europe, dual, engine PTO), (1040, 1140 from Canada with cont PTO or dual, engine PTO or dual, cont PTO), (1120 from europe with cont. driven PTO), (1130 from europe with dual, engine PTO), (1350 europe, dual, cont driven PTO), (1520 dual, cont. driven PTO or europe dual, engine PTO), (1530, 2020, 2030 dual, cont. driven PTO), (2020, 2040, 2120 europe, cont. driven PTO), (2130, 2155 with Ind. PTO). Replaces AT21675. (Part No: 150755)$97.70
PTO Drive Gear - This PTO Drive Gear has 13 Teeth. It is used on 440 Industrial and 420, 430, 435 Tractors. Replaces: M3546T (Part No: 126547)		$124.00
PTO Driven Gear - This PTO Driven Gear has 19 and 43 Teeth. It is used on John Deere 420, 430, 435 Tractors and 440 Industrial. Replaces M3545T (Part No: 126548)		$370.00
PTO Drive Reduction Gear - This 540 Rpm PTO Drive Gear fits John Deere Models: 2840, (3020 serial number 123000 and up), 4000, (4020 serial number 201000 and up), 4030, 4040, 4050, (4055, 4255, 4440, 4450, 4455 all QUAD & POWER SHIFT), 4230, 4240, 4250, (4320 SYNCRO), 4430; Replaces John Deere Part Number R42014 (Part No: 121745)		$257.30
PTO Drive Shaft - For 540-1000 RPM. 10.04 Inches long, 27 27 Teeth. For tractor models 2040, 2140, 2550, 2555, 2650, 2750, 2755, 2940, 2950, 3040, 3140, 3150, 3155. (Part No: 128179)$200.00
PTO Driveshaft, Internal - For model 4010. (Part No: 111781)$1150.00
PTO Flipper Guard - (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, (70D with Non-live PTO & Non hydraulics). Replaces: Guard: AA3522R, Pin: F710R, Spring: F711R (Part No: 178326)		$34.95
PTO Flipper Guard - For tractor models (50, 60, 70 with Live PTO Live Hydraulics), 520, 530, 620, 630, 720, 730. (Part No: 109575)$34.95
PTO Flipper Guard Spring - For tractor models (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: 115822)		$7.49
PTO Friction Disc - PTO FRICTION DISC For 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2440 LESS HI-LO, 2630, 2640, 2640 LESS HI-LO, 2840 (Part No: 127057)$6.00
PTO Guide - Used on John Deere 301, 500, 600, 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455. Replaces John Deere OEM numbers R38220, R70960, R72046, R45126 (Part No: 121740)		$67.99
PTO Housing - For tractor models 1010, 420, 430, 435. (Part No: 173090)		$206.10
PTO Oil Seal - Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Part No: 152182)		$10.16
PTO Oil Seal Housing Shim -
  • For John Deere tractor models 60 (2 used on following with engine driven PTO, s n 6025404-later), 70, 520, 530 (2 Used on models with engine driven PTO), 620, 630, 720, 730 (2 used on Rowcrop)< li>
  • Replaces John Deere OEM number F1461R< li>
  • Steel< li>
  • 23 Gauge< li>
  • 0.018" Thick< li> < UL> (Part No: 125629)
$9.20
PTO Plate -
  • For John Deere tractor models 1250, 1450, 1650< li>
  • Replaces John Deere OEM number CH16338, CH20255< li>
  • Plate Diameter: 9-1 2"< li>
  • Plate Hub Diameter: 15 16"< li>
  • Plate Spline: 13< li>
  • Plate Center: Spring< li>
  • Plate Type: Woven< li> < UL> (Part No: 122071)
$122.00
PTO Plate -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5415, 5500, 5510, 5600, 5615, 5700, 5715< li>
  • Replaces John Deere OEM number RE45662< li>
  • Replaces Carraro manufacturer number 350037< li>
  • Clutch Diameter: 11"< li>
  • Clutch Hub Diameter: 1"< li>
  • Clutch Spline: 13< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • For a Remanufactured version of this sku use Item #: 205878< li> < UL> (Part No: 154709)
$57.00
PTO Plate -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number RE29611< li>
  • Clutch Size: 9"< li>
  • Clutch Hub: 1-11 16"< li>
  • Clutch Spline: 26< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven PTO< li>
  • For a Remanufactured version of this sku use Item #: 204460< li> < UL> (Part No: 160853)
$95.00
PTO Plate -
  • For John Deere tractor models 1450, 1650< li>
  • Replaces John Deere OEM number CH20257, CH18509< li>
  • Clutch Size: 10-1 2"< li>
  • Clutch Hub: 15 16"< li>
  • Clutch Spline: 13< li>
  • Clutch Center: Solid< li>
  • For a Remanufactured version of this sku use Item #: 205871< li> < UL> (Part No: 163896)
$229.00
PTO Plate, Remanufactured -
  • For John Deere tractor model 1250< li>
  • Clutch Size: 9-1 2"< li>
  • Clutch Hub: 15 16"< li>
  • Clutch Spline: 13< li>
  • Clutch Center: Solid< li> < UL> (Part No: 205867)
$99.01
PTO Plate, Remanufactured -
  • For John Deere tractor models 500, 3010, 3020< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-11 16"< li>
  • Clutch Spline: 26< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 4 Pad PTO< li> < UL> (Part No: 205875)
$97.01
PTO Plate, Remanufactured, AR26688 -
  • For John Deere tractor models 4000, 4010, 4020, 4320< li>
  • Replaces John Deere OEM number AR26688, RE29609< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1-7 8"< li>
  • Clutch Spline: 29< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven PTO< li>
  • For a New version of this sku use Item #: 130090< li> < UL> (Part No: 204469)
$102.00
PTO Plate, Remanufactured, AR38286 -
  • For John Deere tractor models 2510, 2520< li>
  • Replaces John Deere OEM number AR38286, RE2961< li>
  • Clutch Size: 9"< li>
  • Clutch Hub: 1-11 16"< li>
  • Clutch Spline: 26< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven PTO< li>
  • For a New version of this sku use Item #: 160853< li> < UL> (Part No: 204460)
$149.00
PTO Plate, Remanufactured, AR43028 -
  • For John Deere tractor models 4520, 4620, 7020< li>
  • Replaces John Deere OEM number AR43028, RE29612< li>
  • Clutch Size: 12"< li>
  • Clutch Hub: 2-1 16"< li>
  • Clutch Spline: 32< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven PTO< li>
  • For a New version of this sku use Item #: 130102< li> < UL> (Part No: 205877)
$146.00
PTO Plate, Remanufactured, AT21675 -
  • For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2440, 2450, 2550, 2630, 2640< li>
  • Replaces John Deere OEM number AT21675, AL19092< li>
  • Clutch Size: 9"< li>
  • Clutch Hub: 1-1 2"< li>
  • Clutch Spline: 23< li>
  • Clutch Center: Spring< li>
  • For a New version of this sku use Item #: 150755< li> < UL> (Part No: 205870)
$109.01
PTO Plate, Remanufactured, R3419 -
  • For John Deere tractor models 420, 430, 435< li>
  • Replaces John Deere OEM number R3419, AM3405T< li>
  • Clutch Size: 9"< li>
  • Clutch Hub: 1-3 4"< li>
  • Clutch Spline: 27< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven PTO< li> < UL> (Part No: 205876)
$110.01
PTO Plate, Remanufactured, RE29610 -
  • For John Deere tractor models 500, 3010, 3020< li>
  • Replaces John Deere OEM number RE29610, AR26840< li>
  • Clutch Size: 10"< li>
  • Clutch Hub: 1-11 16"< li>
  • Clutch Spline: 26< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven< li>
  • For a New version of this sku use Item #: 114017< li> < UL> (Part No: 205874)
$86.01
PTO Plate, Remanufactured, RE45662 -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5415, 5500, 5510, 5615, 5715< li>
  • Replaces John Deere OEM number RE45662< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 13< li>
  • Clutch Center: Solid< li>
  • Clutch Type: Woven PTO< li>
  • For a New version of this sku use Item #: 154709< li> < UL> (Part No: 205878)
$116.00
PTO Plate, Remanufactured, RE72536 -
  • For John Deere tractor models 5103, 5203, 5210, 5220, 5303, 5310, 5320< li>
  • Replaces John Deere OEM number RE72536, RE72826< li>
  • Clutch Size: 11"< li>
  • Clutch Hub: 1"< li>
  • Clutch Spline: 13< li>
  • Clutch Center: Solid< li>
  • Clutch Type: 3 Pad PTO< li> < UL> (Part No: 205879)
$117.00
PTO Safety Clutch, 40 HP - 1-3 8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: 183648)		$280.00
PTO Seal - This PTO seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. For tractors equipped with PTO shield and flipper guard casting #B1679R. It Fits: A, AN, ANH, AW, AWH (Up to Serial Number 487999), AO, AR (Serial Number 258330 - 259999), B, BN, BNH, BW, BWH (Up to Serial Number: 149699), BO, BR (Serial Number 331077 - 333099). Replaces: AB2578R, 476838 (Part No: 153586)		$22.00
PTO Seal - Dual Lip Pto Seal measures 4.506 inches outside diameter, 3.5 inches inside diameter and .374 inches width. For tractor models 300, 301, 302, 400, 401, 1020, 1030, 1035, 1120, 1130 1520, 1630, 1635. (Part No: AR26706)$22.20
PTO Separator Plate - Application for independent PTO power shaft clutch. IPTO: 540-1000. Separator plate, 5.185" O.D., 3.895" I.D., 10 external splines, application uses 10 sold individually. Used with AL38240 friction discs. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3055, 3150, 3155, 3255. (Part No: 127160)		$9.00
PTO Shaft - 1000 rpm, 55.250" long, 21 27 spline. For model 4620 with powershift transmission. (Part No: 172286)$630.00
PTO Shaft - Reversible, 540 1000 RPM, 9.20" long, 6 spline 21 spline. Replaces L110178, L151598, R125087, R1611794, R93500. For tractor models 3110, 3110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6500, 6510L, 6510S, 6603, 6605, 7200, 7210, 7400, 7405, 7410, 7420, 7500, 7510, 7520, 7600, 7610, 7700, 7710, 7800, 7810, 7820, 7920. (Part No: 111164)		$79.00
PTO Shaft - For tractor models 420, 430, 435, 1010 row crop utility and orchard. PTO Shaft. (Part No: 125638)		$161.00
PTO Shaft - The new 1000 RPM PTO shaft is 10.875" long with 21 Splines. Fits John Deere 2510, (3020 Up to Serial Number 122998), (4020 Up to Serial Number 200998). Replaces R33342 (Part No: 109361)		$166.00
PTO Shaft - This PTO Shaft is 31.250 long, 6 spline, 540 RPM. It is used on some of the following: 1020 (W HEAVY DUTY PTO BEARINGS), 1030, 1040 (Serial Number 437370 and up), 1120 (W HEAVY DUTY PTO BEARINGS), 1130, 1140 (SN 437370>), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (Serial Number 350000 and up), 2130, 2140, 2150, 2155, 2240 (Serial Number 350000 and up), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, 820 (3 Cyl.) (W HEAVY DUTY PTO BEARINGS), 840 (Serial Number 437370 and up), 920 (W HEAVY DUTY PTO BEARINGS), 940 (Serial Number 437370 and up) It replaces L28712, L38806. Verify measurements and OEM Numbers. (Part No: 162347)		$345.00
PTO Shaft - This is a 540 1000 RPM PTO Shaft Used on Multiple John Deere Models. It is 9.26 Inches Long, 21- 15 - 6 Splines. Replaces L110178, L151598, L156976, L173282, R125087, R161794, R93500 (Part No: 166145)		$150.00
PTO Shaft - This is a 540 1000 RPM PTO Shaft Used on multiple John Deere models. It is 9.26 Inches Long, 21- 15 - 6 Splines. Replaces L110178, L151598, L156976, L173282, R125087, R161794, R93500 (Part No: 166145)		$150.00
PTO Shaft -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T< li>
  • Replaces John Deere OEM number R110061< li>
  • Length: 39"< li>
  • Spline Teeth: 20< li>
  • RPM: 1000< li> < UL> (Part No: 186963)
$349.00
PTO Shaft -
  • For John Deere tractor model 4520 (with Syncro-Range Transmission)< li>
  • Replaces John Deere OEM number R43531< li>
  • Length: 60"< li>
  • Spline: 21 21< li>
  • 1000 RPM< li> < UL> (Part No: 186964)
$522.00
PTO Shaft - 540 RPM - 6 Splines 10.687 Long For 2510 (To S#10490), 3020 (To S#122999), 4020 (To S#200999) (Part No: 111774)$138.00
PTO Shaft - 540 RPM - 6 Splines 10.687 Long For tractor models 2510 (From S#10491), 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4255, 4320, 4430, 4440, 4450. Replaces AR41752, R41756 (Part No: 108507)		$101.00
PTO Shaft - 1000 RPM - 21 Splines 10.875 Long For tractor models 2510, 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Replaces OEM R38224 (Part No: 108935)		$92.00
PTO Shaft, 1000 RPM - 9.781" long, 21 splines. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Part No: 113707)		$242.60
PTO Shaft, 1000 RPM - 5.290" long, 21 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1520, 2020, 2030, 2120, 302, 820, 920, 1030, (2440 SN# up to 340999). (Part No: 162346)		$189.00
PTO Shaft, 1000 RPM - 4.275" long, 21 spline, bolt on hub. For tractor models 3010, 4010. (Part No: 108902)		$97.00
PTO Shaft, 540 RPM - 31.250" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2240, 2630, 301A, 302, 401B, 820, 830, (920 up to SN# 178089), 300B, 302A, 401C, (2440, 2640 SN# up to 340999). (Part No: 167804)		$275.00
PTO Shaft, 540 RPM - 6.875" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1520, 2020, 2030, 2120, 2440, 302, 820, 920, 1030. (Part No: 162351)		$245.20
PTO Shaft, 540 RPM - Does not include JD7557 bearing race. 9.203 inches long, 6 spline. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Part No: 111384)		$180.83
PTO Shaft, 540 RPM - 5.310" long, 6 spline, bolt on hub. For tractor models 3010, 4010. (Part No: 108901)		$97.00
PTO Shaft Oil Seal Housing - Used on John Deere A up to Serial Number 487999 and John Deere B up to Serial Number 149699. This is a new part, made just like the original. Uses AB2578R seal, not included. (Part No: 125634)		$155.00
PTO Shaft Seal - This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Part No: 128541)		$6.40
PTO Shield - For tractor models 3010, 4010, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520. PTO Shield. (Part No: 104095)		$39.99
PTO Shield - For 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4455. PTO Shield. (Part No: 104094)		$30.20
PTO Shield - This PTO shield fits the following tractor models: M and MT without a belt pulley. Please note that it is recommended that you fist fit this part to your tractor before painting. It also replaces part numbers: AM599T and AM214T. (Part No: 125644)		$100.00
PTO Shield - For A, B, G, LA. For EARLY 50, 60, 70, all with Live PTO & Powr-Trol. PTO Shield replaces #AA2297R. (Part No: 109984)		$77.00
PTO Shield - For 50 and 60 with SN# up to 6025403. For 70 SN# after 7017500. PTO Shield replaces #AA5243R (Part No: 115818)		$79.95
PTO Shield - For 60 after SN# 6025404 and 70. PTO Shield replaces AF1664R. (Part No: 110917)		$79.95
PTO Shield - For 520, 530, 620, 630, 720, 730. PTO Shield replaces AR20482R. (Part No: 110903)		$64.95
PTO Shield Casting - For 520, 530, 620, 630, 720, 730. PTO Shield Casting replaces #AF2687R. (Part No: 110904)$104.50
Shaft, PTO (540 RPM) - This is a 540 RPM shaft to replace 1000 RPM standard shaft. Fits tractor models 500A (IND), 500B (IND), 500C (IND), 600 (SN 201000>), 2510, 2520, 3020 (SN 123000>), 4000, 4020 (SN 201000>), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Dimensions: 11.840" long, 6-spline. (Part No: 121487)		$95.00
Shaft, PTO (540 RPM) - Does not include JD7557 Bearing Race. Fits 500, 500A, 600, 2510, 3020 (SN <-122999), 4020 (SN <-200999). Dimensions: 10.687" long, 6-spline. (Part No: 111774)		$138.00
 
Seats
Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 178435)		$83.00
Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 110196)		$90.00
Backrest, Black - Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Black. For tractor models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1 2x5-1 4). (Part No: 101303)		$45.00
Black Seat Back - Flat Back. Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Black. For tractor models M, MT, 40, 320, 330, 120, 430, 435, 440, 40, 420 series (replaces AM339T)(18x4-3 4). Used with JT88B. (Part No: 101313)		$43.76
Black Seat Back - Flat Back. Cushion on a wood base. For M, MT, 40 UTILITY, 320, 330, 120, 430, 435, 440, 1010. Used with R0991. (Part No: 110878)		$397.20
Black Seat Bottom - Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Plated steel all-around corner brackets. Black. For tractor models M, MT, 40, 420 series (18 x 16). (Part No: 101311)		$62.00
Black Seat Bottom - For tractor models M, MT, 40 UTILITY, 320, 330, 120, 430, 435, 440. Black vinyl with wood base. Used with R0992. (Part No: 101311)		$62.00
Bottom Seat Cushion - Bottom seat cushion, brown cloth, made to fit Personal Posture Seat. Heavy Duty Fabric On High Density Foam, Steel Back for Mechanical Suspension. Replaces John Deere Part Number AR76515 (Part No: 101296)		$86.00
Cushion, Arm Rest, Black - Fits Industrial Construction: 350, 450, 450B, 450C, 550. (Part No: 182148)		$83.00
Cushion, Back, Black - Fits Industrial Construction: 350, 450, 450B, 450C, 550. (Part No: 172610)		$94.00
Pan Seat - This tractor seat is 19 inches wide with nine holes. For A, B, D, G, H, L. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Part No: 101352)		$34.26
Seat Adjustment Handle - For the following John Deere models with Float Ride seat: 50, 520, 530, 620, 630, 720, 730, 80, 820 (2 cylinder), 830 (2 cylinder), 840 (2 cylinder with serial number 8400200 & up). Replaces AF3427R. (Part No: 105324)		$31.00
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V)		$1518.86
Seat Assembly - Black Fabric on Steel. For tractor models 10, 20, 30, 40, 50, 55, 60 Series with Mechanical or Hydraulic Suspension (Part No: 181986)		$913.25
Seat Assembly - Brown Fabric on Steel. For tractor models 10, 20, 30, 40, 50, 55, 60 Series with Mechanical or Hydraulic Suspension (Part No: 101291)		$647.07
Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P N R0172 if needed. (Part No: 110194)		$75.00
Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 179186)$56.00
Seat Back - Black, wood, 6 inches high. For tractor models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. 16.5 inch bolt spacing. (Part No: 116170)		$35.26
Seat Back - This is the SEAT BACK, UPPPER PORTION OF PHOTO. Yellow Vinyl on Steel For 1020, 1520, 2020, 2440 (To S#340999), 2630, 2640 (To S#340999), 4000 Low Profile. Replaces OEM # AR65449. (Part No: 180185)		$370.60
Seat Back - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. Replaces AR59680-6, AR59680, R34268 (Part No: 109267)		$195.60
Seat Back - This is only the SEAT BACK, Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: 180180)		$265.00
Seat Back - Black Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: 178448)		$157.00
Seat Bottom - Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Seat has a painted wood bottom and 4" foam cushion. Seat is 19.5" X 14.5". For tractor models A, B, G, 50, 60, 70. (Part No: 101300)		$62.00
Seat Bottom - *** USE JT77Y *** Yellow, wood back. 191 2" x 14 1 2". For D, G, R, 50, 60, 70 80, 520, 530, 620, 630, 720, 730, 820, 830. For seat back order part R0173. NOTE: If tractor has Float Ride, order p n 0994RTP bottom instead. Picture shows seat back. Not included in price. Order P N R0173 if needed. (Part No: 101300)		$62.00
Seat Bottom - Black, wood, 19 1 2 inches x 14 1 2 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 116729)		$91.19
Seat Bottom - New John Deere replacement bottom cushion, steel base, heavy duty fabric on high density foam. For hydraulic suspension seats. Replaces AR82944, RE163027, RE188578 (Part No: 112495)		$119.00
Seat Bottom - This is the SEAT BOTTOM, LOWER PORTION OF PHOTO. Yellow Vinyl on Steel For 1020, 1520, 2020, 2440 (To S#340999), 2630, 2640 (To S#340999), 4000 Low Profile. Replaces OEM# AR65448. (Part No: 179584)		$205.16
Seat Bottom - This is only the Seat Bottom in Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: 109266)		$123.00
Seat Bottom - This is only the Seat Bottom in Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: 182163)		$189.00
Seat Bottom - This is only the Seat Bottom in Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: 180186)		$189.00
Seat Bottom (Float Ride) - Yellow, wood. for 520, 530, 620, 630, 720, 730, 820, 830, 840 all with Float Ride only. This seat cushion measures 20-5 8 Inches by 14-1 2 Inches wide and 5 Inches tall. Order part number JT77Y if you want just a standard seat bottom. Replaces AF3270R (Part No: 101300)		$62.00
Seat Bracket Set - This Seat Bracket Set is used with JD5678 seat cushion set. Kit contains: (1) R34272 back support bracket, (1) R27785 rear armrest support bracket, (1) R31512 RH seat bracket & (1) R31513 LH seat bracket. (Part No: 108180)		$29.00
Seat Cushion - Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Plated steel all-around corner brackets. Black: 1010 all, 2010c (Replaces AT13599) (18 x 14-1 2). For 1010, 2010 (Part No: 116719)		$95.00
Seat Cushion, Back - This is a brand new original fabric personal posture back cushion with steel back for hydraulic or mechanical seats with five position lumbar support . It fits multiple John Deere models. It does not contain brackets or hardware. Replaces John Deere part numbers RE12049, AR71107 (Part No: 101297)		$124.00
Seat Cushion, Back - This is a brand new original fabric personal posture back cushion with steel back for hydraulic or mechanical seats with five position lumbar support . It fits multiple John Deere models. It does not contain brackets or hardware. Replaces John Deere part numbers RE12049, AR71107 (Part No: 101297)		$124.00
Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. Used SBK400 Bracket Set, not included. The bottom cushion in this set is 3 1 2 inches thick. Replaces R34618, R34619, R34620, TY26545 (Part No: 109348)		$290.00
Seat Cushion Set, 2 Piece - This Seat Cushion Set is Yellow Vinyl on Steel. It is used on John Deere Combines: 3300, 4400, Sprayer: 6000, Swather Windrowers: 2320, 2420, 830, Tractors: 1010, 1020, 1520, 2020, 2030, 2040, 2130, 2150, 2155, 2250, 2255, 2350, 2440, 2550, 2555, 2630, (2640 below serial number 40999), 2750, 2755, 2955, 830(3 Cyl.) Replaces AR65448, AR65449, TY9379-6 (Part No: 101288)		$148.00
Seat Frame Assembly - Assembly includes Frame, Back and Latch. Does not include Base or Base with Toolbox, Sold Seperatly. For tractor models M, MC, MI, MT. Also replaces AM476T, M1501T, M358T, M359T and M360T. (Part No: 116595)		$370.00
Seat Frame Base without Toolbox - This seat frame base fits tractor models: M with Touch-O-Matis and with a serial number of 46205 and up. (Part No: 179599)		$78.00
Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3 4 inches deep). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: 180784)$116.00
Seat Pin & Bushing Kit - For 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Part No: 108832)		$59.99
Seat Shock Absorber - For 520, 530, 620, 630, 720, 730, 820, 830. Seat shock absorber with bushings for tractor models with Float Ride Seat. Center to center extended is 13 inches, compressed 8 3 4 inches. Replaces AF3426R. (Part No: 109874)		$40.00
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. Price is for a pair (2 pieces). This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Part No: 109602)		$3.56
Seat Spring, Rubber - Right Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Part No: 105349)		$40.82
Seat Spring, Rubber - Left Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Part No: 105350)		$38.50
Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. This additional charge will be added to your order. (Part No: 155584)		$144.00
Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. This additional charge will be added to your order. (Part No: 101374)		$97.00
Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: 183807)		$126.00
Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 183989)		$186.10
Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180782)$86.00
Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180783)$86.00
Seat Upper Back - This is only the Upper Back Piece in Yellow Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: 109265)		$57.00
Seat Upper Back - This is only the Upper Back in Brown Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: 180189)		$103.00
Seat Upper Back - This is only the Upper Back in Brown Fabric on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: 180188)		$103.00
Seat Upper Back - This is only the Upper Back in Black Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: 180187)		$79.00
Tie-On Seat Cover - Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: 179179)		$54.00
Tie-On Seat Cover - Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: 179810)		$44.00
Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: 179516)		$52.00
Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)		$182.49
Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. This additional charge will be added to your order. (Part No: 101375)		$97.00
Wrap Around Seat Assembly - Yellow - For tractor models 1020, 1030, 1120, 3030, 3040, 3130, 3140, 820, 830, 920, 930, 2280, 2320, 2420, 2150, 2155, 2240, 2250, 2350, 2355, 2440 Late, 2550, 2555, 2640 Late, 2750, 2750, 2840, 2940, 2950, 2955. Add an Additional $15 for shipping due to weight. This additional charge will be added to your order. (Part No: 101375)		$97.00
Yellow Backrest - Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Yellow. For tractor models 40, 420 series (replaces AM3462Y) (18x 4-3 4) (Part No: 101312)		$43.76
Yellow Seat Back - Flat back, Vinyl on wood. For tractor models M, MT, 40, 320, 330, 420, 430, 435, 440. AM3462T Used with AM3463T. (Part No: 101312)		$43.76
Yellow Seat Bottom - Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Yellow. For tractor models M, MT, 40, 420 series (18 x 16). (Part No: 101310)		$62.00
Yellow Seat Bottom - Vinyl on wood. For tractor models M, MT, 40, 320, 330, 420, 430, 435, 440. Used with AM3462T. (Part No: 116716)		$70.00
 
Sheet Metal / Body Parts
4th Step -
  • For John Deere tractor models 2840, 2950, 2955, 3010, 3020, 3040, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 109570)
$71.00
4th Step Kit -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • With rubber side plate< li>
  • Step is 15" x 6"< li>
  • For use with step kits 108121 or 108122< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 150801)
$114.72
Battery Base - Use with AA3954R. For A (From S#584000), G (From S#26000). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces original part number AA4013R (Part No: 112487)		$55.00
Battery Base - Use with R1521 & R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126477)		$56.80
Battery Box - For model A with Serial Number 584000 and up, G with Serial Number 26000 and up. Also replaces AA4841R, AA4941R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104073)		$124.00
Battery Box - For tractor models 50, 60, 520, 530, 620, 630. Battery Box. Has PTO bracket unlike original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104074)		$101.00
Battery Box - For 70, 720, and 730, all Gas. Battery Box. Made In USA. Also replaces AF3005R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104075)		$143.00
Battery Box - For 720, 730, 830 Diesel With Electric Start and Float Ride Seat. Inside Measures 18 3 4 inch x 15 1 8 inch x 9 1 2 inch. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. $15 addtional shipping is required on this part due to the package size. This will be included in the shipping total for the order. (Part No: 108306)		$183.00
Battery Box - This battery box is for a model B with Serial Number 201000 and up, or model R With Pony Start. Replaces OEM# AB3593R, AB4101R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104076)		$190.90
Battery Box - For 820, 830. All With Pony Motor and NOT Float Ride Seat. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126454)		$206.00
Battery Box - For M, MT, MC. Battery Box includes Left Side with Winged Latch, Right Side with Toolbox and Bottom Tray. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179464)$285.00
Battery Box - With tool box door, for diesel models with Pony motor: 70, 720. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110975)		$335.00
Battery Box - If you have a John Deere 720 or 730, diesel with pony start, we have the new battery box you have been looking for. This box measures 15-1 2 inches long, 13 inches wide and 10-1 4 inches tall. There is no toolbox door, but it has a divider so it will work with float ride seats. The part ships Powder coated green and has a stamped Center Line. Replaces John Deere part numbers AF3846R (Part No: 110242)		$249.99
Battery Box - For 520, 530, 620, 630. Battery Box Made in USA. Restoration Quality. No PTO bracket like original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 112132)		$196.00
Battery Box - For 50, 60. Battery Box Made In USA. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104074)		$101.00
Battery Box - With Hold Down For model H (From SN# # 27000)M, MT, MC. Replaces OEM# H939R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126456)		$93.00
Battery Box - Complete - For model B SN# 96000 to 200999. Includes top and both sides. Replaces: LH: AB2926R, RH: AB2925R, Top B1937R (Part No: 104077)$103.00
Battery Box Complete 3-Piece Assembly - For tractor models 40, 320, 420. This kit consists of 2519RTP, 2520RTP, 2521RTP. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 178688)$285.00
Battery Box Cover - For model L after SN# 640000. Customer must drill holes for the retainer bolts as these varied slightly. (Part No: 126459)$81.99
Battery Box - Left - This left side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Replaces AR20210, AR26617, AR34819, AR40208, AR40674. Battery box comes primed. (Part No: 104080)		$68.00
Battery Box - Left Hand - For 3010 STANDARD (SN# 019800 and above) or Row Crop (SN# 001000 and above). Left Hand with Stamped Steel Tray. Does not come with TOP. Side locking clips and bottom hooks included. Painted Green. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104080)		$68.00
Battery Box, Left Side Wall, with Winged Latch - For tractor models M, MT, MC. Replaces AM957T. Needs right hand side and tray to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179510)		$99.00
Battery Box, Left Side Wall, with Winged Latch - For tractor models 40, 320, 420. Replaces AM1809T. Needs right side and tray to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126460)		$87.00
Battery Box Left Side with Winged Latch - For tractor models 330, 430. Replaces AT10786T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126462)		$77.95
Battery Box, LH - For model 4010. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 123099)		$69.51
Battery Box, LH - For tractor models 2510, (3020 Row crop hi-crop SN# 050000 and up, standard 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104080)		$68.00
Battery Box, LH - For model 4020 SN# 065000-200999. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104080)		$68.00
Battery Box, RH - For model 4010. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 123100)		$69.22
Battery Box, RH - For tractor models 2510, (3020 Row crop hi-crop SN# 050000 and up, standard SN# 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104079)		$68.00
Battery Box, RH - For tractor models 2520, (3020 serial number 123000 and up), (4000 Row crop serial number 201000 and up), (4020 Row crop serial number 201000 and up), 4320, 4520, 4620. All less cab and JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104079)		$68.00
Battery Box, RH - For model 4020 SN# 065000-200999. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104079)		$68.00
Battery Box - Right - This right side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Battery box comes primed. Replaces Replaces: AR10209, AR26618, AR34185, AR40207, AR40673. (Part No: 104079)		$68.00
Battery Box - Right Hand - For 3010 ROW CROP SN# 001000 & greater, or STANDARD SN# 019800& greater. Right Hand with Stamped Steel Tray. Does Not come with top. Side locking clips and bottom hooks included. Painted Green.b Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104079)		$68.00
Battery Box Right Side - For tractor models 330, 430. Replaces AT11065T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126463)		$89.95
Battery Box, Right Side Wall, with Toolbox - For tractor models M, MT, MC. Replaces AM358T. Needs left hand side and tray to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179507)		$124.00
Battery Box, Right Side Wall, with Toolbox - For tractor models 40, 320, 420. Replaces AM1800T. Needs left side and tray to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126461)		$109.99
Battery Cover - For 820 with 3 cyl, 830 with 3 cyl, 1020, 1030, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640. Battery Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104081)		$33.20
Battery Cover - Three Piece Set For model A (S#477000-#583999). Replaces OEM# AA1900R, AA2000R, A2227R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104078)$104.95
Battery Cover - Three Piece Set For model B (With SN# #96000-#200999). Replaces OEM# AB2925R, AB2926R, B1937R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104077)		$103.00
Battery Cover - For D (From S#153989). Single battery cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces part number AD2417R (Part No: 126458)		$136.00
Battery Cover - Right Hand with Step For 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955. OEM# AR65024 (Part No: 103864)		$82.66
Battery Cover, LH - For tractor models 4555, 4650, 4755, 4850, 4955. (Part No: 103866)		$186.00
Battery Hold Down - For tractor models: (3010, 4010 standard), (3020, 4020 Row-Crop with cab and standard), 4000, (4320, 4520, 4620 Row-Crop with cab). (Part No: 163483)$49.26
Battery Side Cover, LH - For tractor models 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4430, 4630, 4240, 4350, 4440, 4640, 4840, 4250, 4450, 4650, 4850, 4755, 4955, 4055, 4255, 4455, 4555. Replaces AR56012. (Part No: 103868)$27.76
Battery Side Cover, RH - For tractor models 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4430, 4630, 4240, 4350, 4440, 4640, 4840, 4250, 4450, 4650, 4850, 4755, 4955, 4055, 4255, 4455, 4555. (Part No: 103867)$27.76
Battery Tray - For model D SN# 153989 and up. Replaces AD2614R. (Part No: 126479)		$89.70
Battery Tray - For tractor models M, MT, MC. Replaces AM394T. Needs right and left hand sides to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109381)		$73.00
Battery Tray - For tractor models 40, 320, 420. Replaces AM1793T. Needs right and left sides to complete box. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126465)		$68.59
Battery Tray - For tractor models 330, 430. Replaces AT11064T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126464)		$73.99
Cab Foam Kit - 11-Piece - Black. For tractor models 8440, 8640 4WD. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 112866)		$295.00
Cab Foam Kit - With Headliner 7-Piece - Black For tractor models with 1300 Series Hiniker Cab. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 112925)		$301.48
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: 165963)		$41.19
Cab Kit, 10 Piece - For 11" wide seat base. Cab kit (without headliner), black 10-piece set - fits: (4030, 4230, 4430, 4630 - all with 11" wide seat base), 4040, 4240, 4440, 4640, 4840 (cab SN# to 185706). Restore your tractor to NEW condition. Safer quieter and cleaner cab environment. Increases resale value. Easy installation with instructions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109460)		$207.00
Cab Kit, 8 Piece - Cab kit (without headliner), black 8-piece set fits: 4040, 4240, 4440, 4640, 4840 (SN# 185707 & up). Restore your tractor to "NEW" condition. Safer quieter and cleaner cab environment. Increases resale value. Easy installation with instructions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110247)		$210.00
Cab Post Kit - These are items that are not included in the cab kits. Fits 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. (Part No: CPKJD40)		$81.97
Clam Shell Fender Bracket Pair - Fits John Deere - A (up to sn 650763), B (up to sn 260983), G (up to sn 41667). Additional $10.00 shipping due to weight. This additional charge will be added to your order.Replaces: LH - A4050R, RH A4049R (Part No: 127037)		$197.00
Combine Convex Mirror Head, Round, Pivot Post, 8-1/2" -
  • For John Deere tractor models 2355, 2555, 2755, 2855N, 2955, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 4960, 6030, 8430, 8450, 8630, 8650, 8850< li>
  • Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6600 SH, 6602, 6620, 6622, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 3950, 3955, 3970, 3975< li>
  • Compatible with John Deere Baler(s) 100, 330, 335, 375, 385, 435, 446, 447, 456, 457, 466, 467, 530, 535, 546, 547, 556, 557, 566, 567< li>
  • Replaces John Deere OEM number AH99408< li>
  • 8-1 2" Round Mirror< li> < UL> (Part No: 115355)
$23.26
Complete 3-Piece Battery Box Assembly - For tractor models 330, 430. This kit consist of 2527RTP, 2528RTP, 2529RTP. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 189273)		$222.20
Complete 3-Piece Battery Box Assembly - Consists of R2523, R2524, R2525. For tractor models M, MT, MC. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179464)$285.00
Control Panel Cover - Left Hand -
  • For John Deere tractor models 600, 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4320, 4520, 4620, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123114-152141), 500B, 500C, 510< li>
  • Replaces John Deere OEM number AR40585< li>
  • Fits Left Hand Side< li> < UL> (Part No: 163904)
$79.00
Control Panel Cover - Right Hand -
  • For John Deere tractor models 600, 3020, 4000, 4020, 4320, 4520, 4620, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500C, 510< li>
  • Replaces John Deere OEM number AR40584< li>
  • Fits Right Hand Side< li> < UL> (Part No: 163905)
$78.00
Cowl, Left Hand - This Left Hand Cowl (Battery Cover) is Green Plastic. Used on 1640, 1840, 2040S, 2140, 2350, 2440 S N 341000->, 2550, 2640 S N 341000->, 2750. All 4 Cylinder Tractors. Replaces AL31040 (Part No: 118510)		$201.00
Cowl, Right Hand - This Right Hand Cowl (Battery Cover) is Green Plastic. Used on 1640, 1840, 2040S, 2140, 2350, 2440 S N 341000->, 2550, 2640 S N 341000->, 2750. All 4 Cylinder Tractors. Replaces AL31039 (Part No: 118511)		$201.00
Deluxe Fastener Kit - Includes bolts for Radiator, Shutter, Curtain, Fan Shroud, Hood, Seat Base and Drawbar Frame. For Unstyled A Series up to SN# 476999. Has the letter "E" on the radiator bolts. 148 pcs. (Part No: JDS1012)		$107.02
Deluxe Fastener Kit - Includes bolts, nuts and washers for the hood, grill, nose shutters, hood rubber washers and cushion. For Styled A Series SN# 620844 and up. 89 pieces. (Part No: 150963)		$97.00
Deluxe Fastener Kit - Includes bolts, nuts and washers for the hood, grill, nose shutters, hood rubber washers and cusion. For G SN# 48608 and up using hex head clutch drive bolts. 67 pcs. (Part No: 126198)		$109.00
Deluxe Fastener Kit - Includes bolts, nuts and washers for the hood, grill, nose shutters, hood rubber washers and cusion. For tractor models L SN# 625000 and up, LA and LI. 73 pcs. (Part No: 179996)$64.00
Deluxe Fastener Kit - Includes bolts, nuts and washers for the hood, grill, nose shutters, hood rubber washers and cushion. For model 530 gas and all-fuel. 104 pcs. (Part No: JDS1450)$108.00
Deluxe Hardware Kit - Includes hardware for: Hood, Grill, Grill frame (corner), Flywheel cover and Instrument panel. It is used on John Deere 530, 630 and 730 all gas or diesel. Contains John Deere Part numbers: 12H10R, 12H11R, 12H12R, 12H291, 12H291R, 12H303, 14H785R, 14H812R, 19H2020, 24H1009, 24H106R, 24H1309, 24H1330, 24H1366, 24H1372, 24H145A, 24H464E, 24H550R, 24H889R, 28H1497, A350R, A4666R, A4667R, A4668R, A4669R, AR20945, AR20946, B1839R, B2804R, R20817, R20912R (Part No: 179219)		$124.00
Deluxe Hardware Kit - Includes hardware for: Hood, Medallion (aka nose cone), Grills, Center plate, Radiator shutters and Flywheel cover. It is used on John Deere A serial number 648000 and up, B serial number 275242 and up, G serial number 48608 and up. This is a 102 piece set and contains replacements for John Deere part numbers 12H10, 12H291R, 24H1136, A2181, A4126R, A4668R, B1544R, R20817 (Part No: 126198)		$109.00
Engine Side Shield - Left Hand -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510< li>
  • Replaces John Deere OEM number AL80544< li>
  • Fits Left Hand Side< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162608)
$134.00
Engine Side Shield - Right Hand -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510< li>
  • Replaces John Deere OEM number AL80545< li>
  • Fits Right Hand Side< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 162609)
$172.00
Extend-A-Step -
  • For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • To be used with left hand step kit use Item #: 113386< li> < UL> (Part No: 110137)
$90.00
Fender - Right hand or left hand, fits either side. Clamshell style fender does NOT come with bracket for the following models: A, B, G, 50, 520, 60, 620, 70, 720 Diesel, 630, 730 Diesel. Additional $10 shipping due to weight. This additional charge will be added to your order. Fender measures 27 3 4 tall and 33 inches wide at tallest and widest dimensions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 108307)		$138.00
Fender - Clam Shell Style - 27 Tall For 40, 420, 430, 435. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109502)$165.00
Fender Bracket -
  • For John Deere tractor models 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6420, 6420L, 6420S, 6520L, 6615, 6715, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number L216249< li> < UL> (Part No: 159532)
$87.00
Fender Bracket - For 530, 630, 730. Replaces R20573. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109547)		$99.00
Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 103964)		$97.00
Fender Bracket, Left - For A, B and G. Fender Bracket - Left. Additional $5.00 shipping due to weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110027)		$73.50
Fender Bracket, Right - For A, B and G. Fender Bracket - Right. Additional $5.00 shipping due to weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110028)		$81.90
Fender Extension, LH - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AL25635, AL66516 (Part No: 103963)		$39.60
Fender Extension Platform - Left Hand -
  • For John Deere tractor models 830, 930, 1030, 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2030, 2040, 2040S, 2150, 2155, 2350, 2355, 2550, 2555, 2650, 2750, 2755, 2850< li>
  • Replaces John Deere OEM number AL25435< li>
  • Fits left hand side< li>
  • For Fender Extension Platform - Right Hand use Item #: 160143< li> < UL> (Part No: 160144)
$35.76
Fender Extension Platform - Right Hand -
  • For John Deere tractor models 830, 930, 1030, 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2030, 2040, 2040S, 2150, 2155, 2350, 2355, 2550, 2555, 2650, 2750, 2755, 2850< li>
  • Replaces John Deere OEM number AL25434< li>
  • Fits right hand side< li>
  • For Fender Extension Platform - Left Hand use Item #: 160144< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160143)
$35.76
Fender Extension, RH - This Fender Extension, (Side Step) is for tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103962)		$39.76
Fender - Flat Top, RH Side, With Hand Hole - For 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces OEM RE13878. Rubber Hand Hole Grommets available as part number R20759. Additional $20 shipping due to size and weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 127011)		$499.99
Fender, Flat-Top, RH without Hand Hole - Right Hand without Hand Hole For 530, 630, 730. Additional $20 shipping due to weight and size. Replaces AR20869R. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 127050)		$588.23
Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: 103959)		$7.30
Fender - Left Hand -
  • For John Deere tractor models 2140, 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255 (all with Sound-Gard body)< li>
  • Replaces John Deere OEM number AR84679< li>
  • Fits left hand side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For Fender - Right Hand use Item #: 116934< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 116935)
$289.00
Fender - Left Hand -
  • For John Deere tractor models 7600 (Tractors with Regular Fender Extension), 7610 (Tractors with Short Fender Extension), 7700 (Tractors with Regular Fender Extension), 7710 (Tractors with Short Fender Extension), 7800 (Tractors with Regular Fender Extension), 7810 (Tractors with Short Fender Extension), 8100 (Tractors with Regular Fender Extension, s n 010000-earlier), 8110 (Tractors with Regular Fender Extension), 8200 (Tractors with Regular Fender Extension, s n 010000-earlier), 8210 (Tractors with Regular Fender Extension), 8300 (Tractors with Regular Fender Extension, s n 010000-earlier), 8310 (Tractors with Regular Fender Extension), 8400 (Tractors with Regular Fender Extension, s n 010000-earlier), 8410 (Tractors with Regular Fender Extension)< li>
  • Replaces John Deere OEM number R157016, R114686< li>
  • For Fender - Right Hand use Item #: 170149< li> < UL> (Part No: 170150)
$1125.00
Fender, Left Hand - This is a bolt on style Fender. The Fenders use Round Headlights. Replaces AR87732, RE14987 (Part No: 103954)		$290.63
Fender, LH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, LH. Fender, shell style with braces and brackets welded in place. Comes primed. Replaces AR51407, AR51408, AT20779, AT27148. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. This additional charge will be added to your order. (Part No: 103961)		$140.00
Fender, LH/RH - For 1010, 40, 420, 430, (435 Diesel). Fender, LH RH. For row crop tractors, not for utility tractors. Check parts manual for correct fender. Additional $15 shipping due to size and weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109502)		$165.00
Fender Pivot Isolator -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number RE60938< li> < UL> (Part No: 165078)
$178.00
Fender, RH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, shell style with braces and brackets welded in place. Comes primed. Fender, RH. Replaces AT20777, AT27146. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. This additional charge will be added to your order. (Part No: 103960)		$121.00
Fender, RH - For 520, 620, 720, 530, 630, 730. Fender, RH, without Hand Hole. Two Light Holes. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Additional $120 shipping due to weight. This additional charge will be added to your order. (Part No: 127050)		$588.23
Fender - Right Hand -
  • For John Deere tractor models 2140, 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255 (all with Sound-Gard body)< li>
  • Replaces John Deere OEM number AR84678< li>
  • Fits right hand side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For Fender - Left Hand use Item #: 116935< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 116934)
$289.00
Fender - Right Hand -
  • For John Deere tractor models 7600 (Tractors with Regular Fender Extension), 7610 (Tractors with Short Fender Extension), 7700 (Tractors with Regular Fender Extension), 7710 (Tractors with Short Fender Extension), 7800 (Tractors with Regular Fender Extension), 7810 (Tractors with Short Fender Extension), 8100 (Tractors with Regular Fender Extension, s n 010000-earlier), 8110 (Tractors with Regular Fender Extension), 8200 (Tractors with Regular Fender Extension, s n 010000-earlier), 8210 (Tractors with Regular Fender Extension), 8300 (Tractors with Regular Fender Extension, s n 010000-earlier), 8310 (Tractors with Regular Fender Extension), 8400 (Tractors with Regular Fender Extension, s n 010000-earlier), 8410 (Tractors with Regular Fender Extension)< li>
  • Replaces John Deere OEM number R157015, R114685< li>
  • For Fender - Left Hand use Item #: 170150< li> < UL> (Part No: 170149)
$1125.00
Fender, Right Hand - This is a bolt on style Fender. The Fenders use Round Headlights. Replaces AR87731, RE14981 (Part No: 103953)		$260.00
Fender Set - Right Hand and Left Hand -
  • For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 400, 401, 480< li>
  • Replaces John Deere OEM number AL28584, AL28585, AT20777, AT20779< li>
  • Left Hand and Right Hand Set< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For Fender - Right Hand use Item #: 103961< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 140628)
$245.00
Fender U-Bolt - This Fender U-Bolt is used on John Deere (2010 Rowcrop Utility; SN: 42001 & up), 2010 Rowcrop, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. It Replaces original part number R26992 (Part No: 103965)		$12.70
Flywheel Cover Guard - Used on John Deere A 477000 - 498999, 1939-1940 4 Speed, AR and AO To serial number 271999. This part should be fit to tractor before painting. (Part No: 126484)		$129.99
Flywheel Cover Guard - Used on John Deere B serial number 60000 to 95999, 1939 - 1940 4 Speed. Replaces John Deere part number AB1856R. Fit to your tractor before painting. (Part No: 126486)		$129.99
Flywheel Cover Guard - Like all sheet metal parts, this Flywheel Cover Guard should be fitted to your tractor before painting. This part is used on John Deere B serial numbers 96000-200999. (Part No: 126487)		$139.00
Frame Rail - Left Hand -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR73325< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 103861)
$518.50
Frame Rail, LH - For tractor models 3010, 3020. OEM# AR65369. (Part No: 103857)		$400.00
Frame Rail, LH Side - For tractor models 4000, 4010, 4020. Replaces R26556. ***AN ADDITIONAL SHIPPING CHARGE OF $20.00 WILL BE ADDED DUE TO THE WEIGHT OF THIS PART*** This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103859)		$375.00
Frame Rail, RH - For tractor models 3010, 3020. OEM# AR65368. (Part No: 103856)		$405.00
Frame Rail, RH Side - For tractor models 4000, 4010, 4020. Replaces R26555. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103858)		$397.00
Frame Rail - Right Hand -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR73324< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 103860)
$518.50
Front Fender -
  • For John Deere tractor models 8110, 8120, 8130, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 19" Fender< li>
  • For Tires 11" x 20", 11" x 24"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123337)
$1501.48
Front Fender -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7520, 7600, 7610, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520 (With American Made Front End Front Axle s n 800000-earlier)< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • Unique design allows fender to stop turning independent of the wheel. This allows the fender to stop before touching the tractor frame or loader< li>
  • 19" Pivoting Fender< li>
  • For Tires 13.9" - 16.9" x 24" - 32"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123340)
$1766.19
Front Fender -
  • For John Deere tractor models 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430, 8520, 8530 (With Mechanical Front End)< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • Unique design allows fender to stop turning independent of the wheel. This allows the fender to stop before touching the tractor frame or loader< li>
  • 19" Pivoting Fender< li>
  • For Tires 13.9" - 16.9" x 24" - 32"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123341)
$1766.19
Front Fender -
  • For John Deere tractor models 7630, 7730, 7830, 7930, 8130, 8230, 8320, 8330, 8420, 8520, 8530 (With American Made Front End)< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • Unique design allows fender to stop turning independent of the wheel. This allows the fender to stop before touching the tractor frame or loader< li>
  • 19" Pivoting Fender< li>
  • For Tires 13.9" - 16.9" x 24" - 32"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123342)
$1766.19
Front Fender Base -
  • For John Deere tractor models 7405, 7500, 7505< li>
  • Replaces John Deere OEM number L114706< li> < UL> (Part No: 167897)
$146.00
Front Fender Support Set -
  • For John Deere tractor models 6120, 6120L, 6220, 6220L, 6320, 6320L, 6420, 6420L, 6420S, 6520L, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL163250, AL163253< li>
  • Sold as a pair< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 158892)
$290.00
Front Fender without Step -
  • For John Deere tractor models 2750, 2840, 2850, 2940, 2950, 3010, 3020, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6200, 6300, 6400, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 13" Fender< li>
  • For Tires 9", 10", 11"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 123331)
$834.90
Front Fender without Step -
  • For John Deere tractor models 2750, 2840, 2850, 2940, 2950, 3010, 3020, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6200, 6300, 6400, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 15" Fender< li>
  • For Tires 14"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 123332)
$819.13
Front Fender with Step -
  • For John Deere tractor models 3010, 3020, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7520, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 13" Fender< li>
  • For Tires 9", 10", 11"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123333)
$1083.83
Front Fender w/ Step -
  • For John Deere tractor models 3010, 3020, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7520, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 15" Fender< li>
  • For Tires 14"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123334)
$1119.13
Front Fender w/ Step -
  • For John Deere tractor models 4520, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 13" Fender< li>
  • For Tires 9", 10", 11"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123335)
$1083.83
Front Fender w/ Step -
  • For John Deere tractor models 4520, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420< li>
  • Front Fender Pair< li>
  • Stops Mud & Rocks< li>
  • Protects Cab & Windshield< li>
  • Durable Polyethylene Plastic< li>
  • Impact Resistant< li>
  • Durable In Extreme Conditions< li>
  • 15" Fender< li>
  • For Tires 14"< li>
  • This has a custom made bracket to fit your tractor, may be up to a 4 week lead time< li> < UL> (Part No: 123336)
$1139.72
Front Grill - For tractor models 8430, 8440, 8630, 8640. (Part No: 178990)		$500.00
Front Grille -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5210, 5303, 5310, 5310N, 5320N, 5403, 5410, 5415, 5415H, 5420, 5420N, 5510, 5510N, 5520, 5520N, 5603, 5605, 5615, 5705, 5715, 5715HC< li>
  • Replaces John Deere OEM number RE209912< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 162111)
$188.00
Front Grill Screen - For 1010. Screen has hole in center for large bolt. Replaces OEM# AT20629. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104082)		$181.00
Front Grill Screen - For model 2010. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AT11703 (Part No: 104083)		$196.00
Front Grill Screen - For 2510, 2520. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104084)$83.90
Front Grill Screen - For 4000, 4010, 4020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104086)		$92.10
Front Grill Screen - For 4520, 4620, 7020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104087)$132.00
Front Nose Cone Screen - For tractor models 2510, 2520. Powder Coat JD Green. (Part No: 104084)		$83.90
Front Side Panel with Screen, Metal - Left Hand -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6510, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL77935< li>
  • Fits left hand side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For Plastic Panel use Item #: 140619< li> < UL> (Part No: 140618)
$195.00
Front Side Panel With Screen, Metal - Right Hand -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6510, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL77936< li>
  • Fits right hand side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For Plastic Panel use Item #: 140618< li> < UL> (Part No: 140619)
$195.00
Front Side Panel with Screen, Plastic - Left Hand -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6510, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL77935< li>
  • Plastic Panel With Metal Screen< li>
  • Fits Left Hand Side < li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For Front Side Panel with Screen, Metal-RH use Item #: 140618< li> < UL> (Part No: 166336)
$116.00
Front Side Panel with Screen, Plastic - Right Hand -
  • For John Deere tractor models 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6510, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL77936< li>
  • Fits Right Hand Side< li>
  • Plastic Frame With Metal Screen< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Assembly may be required < li>
  • For Metal Panel use Item #: 166336< li> < UL> (Part No: 166408)
$116.00
Front Stack Weight -
  • For John Deere tractor models 820, 920, 1020, 1120, 1520, 2010, 2020, 2030, 2120, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2750, 2755, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030< li>
  • Replaces John Deere OEM number R27643< li>
  • 85 Pounds< li> < UL> (Part No: 168974)
$112.60
Gas Strut Spring Cylinder - Door -
  • For John Deere Construction & industrial models 310G, 310J, 310K, 310KEP, 310L, 310L (EP), 310SG, 310SJ, 310SJ (TMC), 310SK, 310SKTC, 310SL, 310SL (HL), 315SG, 315SJ, 315SJ (s n BE315SJ300869-later), 315SK, 315SL, 325J, 325K, 325SL, 410G, 410J, 410J (TMC), 410K, 410KTC, 410L, 710 (L), 710G, 710J, 710K< li>
  • Replaces John Deere OEM number AT340155< li> < UL> (Part No: 163044)
$30.99
Gas Strut Spring Cylinder - Door -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number R132455< li> < UL> (Part No: 164835)
$18.00
Gas Strut Spring Cylinder, Door -
  • For John Deere tractor models 7720, 7815, 7820, 7920, 8100, 8110, 8120, 8120T, 8200, 8210, 8220, 8220T, 8300, 8320, 8320T, 8400, 8410, 8420, 8420T, 8520, 8520T, 9300T, 9320T, 9400T, 9420T, 9520T, 9620T< li>
  • Replaces John Deere OEM number RE234165, RE44680< li>
  • Extended Length: 19.685"< li>
  • Compressed Length: 11.811"< li>
  • Cylinder Diameter: 0.7087"< li>
  • Rod Diameter: 0.315"< li>
  • Stroke Length: 7.75"< li>
  • Female Ball Socket End Type< li>
  • Newton Force: 155< li> < UL> (Part No: 113151)
$19.00
Gas Strut Spring Cylinder, Door -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9320T, 9420T, 9520T, 9620T< li>
  • Replaces John Deere OEM number RE234998, RE23768< li> < UL> (Part No: 113248)
$22.00
Gas Strut Spring Cylinder, Door -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number RE234996, RE44646, RE70191< li>
  • Rod Diameter: 0.315"< li>
  • Cylinder Diameter: 0.709"< li>
  • Piston Length: 3.937"< li>
  • Overall Length: 11.024"< li> < UL> (Part No: 113249)
$15.99
Gas Strut Spring Cylinder - Door, 4369619 -
  • For John Deere Construction & industrial models 110, 120, 120C, 160C LC, 160LC, 180CW, 200CLC, 200LC, 210CW, 230CLC, 230LC, 230LCR, 270CLC, 270LC, 330CLC, 330LC, 330LCR, 370, 370C, 410D, 410E, 450CLC, 550LC, 600C LC< li>
  • Replaces John Deere OEM number 4369619< li> < UL> (Part No: 163036)
$35.00
Gas Strut Spring Cylinder - Door, AT146294 -
  • For John Deere Construction & industrial models 110, 120, 120C, 160C LC, 160LC, 300D, 310D, 310E, 310SE, 315D, 315SE, 410D, 410E, 510D, 544H, 710D, 744H< li>
  • Replaces John Deere OEM number AT146294< li> < UL> (Part No: 163035)
$32.95
Gas Strut Spring Cylinder - Door, AT192449, AT180176 -
  • For John Deere Construction & industrial models 360DC, 460DC, 540E, 540G, 540GII, 540GIII, 548E, 548G, 560D, 608B, 608L, 640E, 640G, 640GII, 643D, 648E, 648G, 653E, 653G, 740, 748E, 748G, 753GL, 759G< li>
  • Replaces John Deere OEM number AT192449, AT180176< li> < UL> (Part No: 163039)
$49.99
Gas Strut Spring Cylinder - Door, TT206465 -
  • For John Deere Construction & industrial models 250D, 300D, 350D, 400 (D)< li>
  • Replaces John Deere OEM number TT206465< li> < UL> (Part No: 163034)
$36.76
Gas Strut Spring Cylinder, Hood -
  • For John Deere tractor models SE6510, SE6610, 6100 (s n 150268-earlier), 6200 (s n 150268-earlier), 6200L (s n 150268-earlier), 6300 (s n 150268-earlier), 6300L (s n 150268-earlier), 6320, 6400 (s n 150268-earlier), 6400L (s n 150268-earlier), 6500, 6500L (s n 150268-earlier), 6505, 6506, 6510, 6600, 6605, 6610, 6800, 6810, 6900, 6910< li>
  • Replaces John Deere OEM number AL77767< li> < UL> (Part No: 113155)
$20.00
Gas Strut Spring Cylinder, Hood -
  • For John Deere tractor models 1350, 1550 (s n 622000-648670), 1750 (s n 622000-648670), 1850 (s n 622000-648670), 1950 (s n 648670-earlier), 1950N (s n 648670-earlier), 2155 (s n 622000-648670), 2250, 2355, 2355N (s n 622000-648670), 2450, 2555, 2650, 2755, 2850< li>
  • Replaces John Deere OEM number AL57946< li> < UL> (Part No: 113160)
$20.31
Gas Strut Spring Cylinder, Hood -
  • For John Deere tractor models 6100D, 6110D, 6115D (s n 050000 earlier), 6120, 6125D, 6130D (s n 050000 earlier), 6140D (s n 050000 earlier), 6215, 6220, 6220L, 6230, 6320, 6330, 6400, 6415, 6420, 6430< li>
  • Replaces John Deere OEM number AL174088< li> < UL> (Part No: 150808)
$16.14
Gas Strut Spring Cylinder, Hood -
  • For John Deere tractor models 6105M, 6105R, 6110M, 6110R, 6115M, 6115R, 6120M, 6120R, 6125M, 6125R, 6130M, 6130R< li>
  • Replaces John Deere OEM number AL209934, AL214868< li>
  • Compressed Length: 14.252"< li>
  • Extended Length: 24.409"< li>
  • Outside Diameter: .866"< li>
  • Rod Diameter: .394"< li> < UL> (Part No: 169972)
$39.00
Gas Strut Spring Cylinder - Pilot Controller Lift Assembly -
  • For John Deere Construction & industrial models 310J, 310K, 310KEP, 310SJ, 310SJ (s n BE315SJ300869-later), 310SK, 325SK, 410J, 410K, 710J, 710K< li>
  • Replaces John Deere OEM number AT340156< li>
  • Pilot Controller Lift Assist Shock Spring< li>
  • Fits RH or LH sides< li> < UL> (Part No: 163038)
$52.40
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 7720, 7815, 7820, 7920, 8100 (s n 005157-later), 8100T, 8110, 8110T, 8120, 8120T, 8200 (s n 003733-later), 8200T, 8210, 8220, 8220T, 8300 (s n 006255-later), 8300T, 8310, 8310T, 8320, 8320T, 8400 (s n 007010-later), 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number RE234166, RE170089, RE174162< li>
  • Overall Length: 15.16"< li>
  • Piston Length: 5.91"< li>
  • Cylinder Diameter: 0.71"< li>
  • Rod Diameter: 0.31"< li> < UL> (Part No: 113104)
$15.99
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 2250 (s n 690261-later), 2450 (s n 690261-later), 2650 (s n 690261-later), 2850 (s n 690261-later), 3050 (s n 690261-later), 3150 (s n 690261-later), 3350 (s n 690261-later), 3650 (s n 690261-later)< li>
  • Replaces John Deere OEM number AL68211< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 113156)
$30.76
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 940, 1040, 1140, 1640 (s n 429999-earlier), 2040 (s n 429999-earlier), 2040S, 2140 (s n 429999-earlier), 3040 (s n 429999-earlier), 3140 (s n 429999-earlier)< li>
  • Replaces John Deere OEM number AL33170< li>
  • Rod Diameter: .315"< li>
  • Cylinder Diameter: .709"< li>
  • Overall Length: 19.685"< li>
  • Piston Stroke: 8.071"< li>
  • Cylinder and rod end fitting both ball and socket< li> < UL> (Part No: 113161)
$16.00
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 5220, 5320, 5420, 5520, 5620, 5720, 5820, 6100, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6400, 6403, 6405, 6410, 6415, 6420, 6420S, 6505, 6510, 6520, 6600, 6603, 6605, 6610, 6615, 6620, 6715, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL114803, AL81578, AL174357< li>
  • Rod Diameter: .315"< li>
  • Cylinder Diameter: .827"< li>
  • Piston Length: 8.27"< li>
  • Overall Length: 19.69"< li>
  • Rod Length: 19.448"< li>
  • Piston Stroke: 7.677"< li> < UL> (Part No: 113163)
$13.99
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810, 8100 (s n 005156-earlier), 8200 (s n 003732-earlier), 8300 (s n 006254-earlier), 8400 (s n 007009-earlier)< li>
  • Replaces John Deere OEM number RE234995, RE51083, RE174161< li>
  • Rod Diameter: 0.709"< li>
  • Cylinder Diameter: 0.315"< li>
  • Piston Length: 6.496"< li>
  • Overall Length: 16.142"< li> < UL> (Part No: 113190)
$19.00
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 1640 (With SG2 cab), 2040 (With SG2 cab), 2040S (With SG2 cab), 2140 (With SG2 cab), 2250 (With SG2 cab), 2450 (With SG2 cab), 2650 (With SG2 cab), 2850 (With SG2 cab), 3040 (With SG2 cab), 3050 (With SG2 cab), 3140 (With SG2 cab), 3150 (With SG2 cab), 3350 (With SG2 cab), 3640 (With SG2 cab), 3650 (With SG2 cab), 4055 (With SG2 cab), 4255 (With SG2 cab), 4450 (With SG2 cab), 4455 (With SG2 cab), 4650 (With SG2 cab), 4755 (With SG2 cab), 4850 (With SG2 cab), 4955 (With SG2 cab)< li>
  • Replaces John Deere OEM number AL66992, AL35675< li>
  • Rod Diameter: 0.315"< li>
  • Cylinder Diameter: 0.709"< li>
  • Piston Length: 12.795"< li>
  • Overall Length: 28.937"< li>
  • Cylinder and rod end fitting ball and socket< li> < UL> (Part No: 113246)
$13.32
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models SE6010 (Outer Roof with Tiltable Hatch), SE6020 (Outer Roof with Tiltable Hatch), SE6100 (Outer Roof with Tiltable Hatch), SE6110 (Outer Roof with Tiltable Hatch), SE6120 (Outer Roof with Tiltable Hatch), SE6200 (Outer Roof with Tiltable Hatch), SE6210 (Outer Roof with Tiltable Hatch), SE6220 (Outer Roof with Tiltable Hatch), SE6300 (Outer Roof with Tiltable Hatch), SE6310 (Outer Roof with Tiltable Hatch), SE6320 (Outer Roof with Tiltable Hatch), SE6400 (Outer Roof with Tiltable Hatch), SE6410 (Outer Roof with Tiltable Hatch), SE6420 (Outer Roof with Tiltable Hatch), SE6510 (Outer Roof with Tiltable Hatch), SE6520 (Outer Roof with Tiltable Hatch), SE6610 (Outer Roof with Tiltable Hatch), SE6620 (Outer Roof with Tiltable Hatch), 6010 (Outer Roof with Tiltable Hatch), 6020 (Outer Roof with Tiltable Hatch), 6105M (Outer Roof with Tiltable Hatch), 6115M (Outer Roof with Tiltable Hatch), 6120M (Glass Panel Roof Hatch), 6125M (Outer Roof with Tiltable Hatch), 6130 (Outer Roof with Tiltable Hatch), 6130M (Outer Roof with Tiltable Hatch), 6140M (Outer Roof with Tiltable Hatch), 6150M (Outer Roof with Tiltable Hatch), 6170M (Outer Roof with Tiltable Hatch), 6230 (Outer Roof with Tiltable Hatch), 6320 (Outer Roof with Tiltable Hatch), 6330 (Outer Roof with Tiltable Hatch), 6420 (Outer Roof with Tiltable Hatch), 6420S (Outer Roof with Tiltable Hatch), 6430 (Outer Roof with Tiltable Hatch), 6506 (Outer Roof with Tiltable Hatch), 6510 (Outer Roof with Tiltable Hatch), 6520 (Outer Roof with Tiltable Hatch), 6530 (Outer Roof with Tiltable Hatch), 6600 (Outer Roof with Tiltable Hatch), 6610 (Outer Roof with Tiltable Hatch), 6620 (Outer Roof with Tiltable Hatch), 6630 (Outer Roof with Tiltable Hatch), 6800 (Outer Roof with Tiltable Hatch), 6810 (Outer Roof with Tiltable Hatch), 6820 (Outer Roof with Tiltable Hatch), 6830 (Outer Roof with Tiltable Hatch), 6900 (Outer Roof with Tiltable Hatch), 6910 (Outer Roof with Tiltable Hatch), 6910S (Outer Roof with Tiltable Hatch), 6920 (Outer Roof with Tiltable Hatch), 6920S (Outer Roof with Tiltable Hatch), 6930 (Outer Roof with Tiltable Hatch), 7130 (Outer Roof with Tiltable Hatch), 7220 (Glass Panel Roof Hatch), 7230 (Outer Roof with Tiltable Hatch), 7320 (Glass Panel Roof Hatch), 7330 (Outer Roof with Tiltable Hatch), 7420 (Glass Panel Roof Hatch), 7430 (Outer Roof with Tiltable Hatch), 7520 (Glass Panel Roof Hatch), 7530 (Outer Roof with Tiltable Hatch)< li>
  • Replaces John Deere OEM number AL82634, AL75479, AL160699< li>
  • Overall Length: 20.44"< li>
  • Stroke Length: 8.625"< li>
  • Shaft Diameter: 0.315"< li>
  • Cylinder Diameter: 0.715"< li>
  • End Type: Clip On Ball Joints< li>
  • Newton Force: 200< li> < UL> (Part No: 121283)
$15.90
Gas Strut Spring Cylinder, Rear Window -
  • For John Deere tractor models 8100 (s n 005157-later), 8100T, 8110, 8110T, 8200 (s n 003733-later), 8200T, 8210, 8210T, 8295RT, 8300 (s n 006255-later), 8300T, 8310, 8310RT, 8310T, 8320RT, 8335RT, 8345RT, 8360RT, 8400 (s n 007010-later), 8400T, 8410, 8410T, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Replaces John Deere OEM number RE66665, RE234988, RE190916< li>
  • Overall Length: 12.40"< li>
  • Cylinder Length: 6.29"< li>
  • Piston Length: 6.11"< li>
  • Rod Diameter: 0.39"< li> < UL> (Part No: 128289)
$15.99
Gas Strut Spring Cylinder, Rear Window or Hood -
  • For John Deere tractor models 7200 (Strut On Hood), 7210 (Strut On Hood), 7400 (Strut On Hood), 7410 (Strut On Hood), 7510 (Strut On Hood), 7600 (Strut On Rear Window), 7610 (Strut On Rear Window), 7700 (Strut On Rear Window), 7710 (Strut On Rear Window), 7800 (Strut On Rear Window), 7810 (Strut On Rear Window)< li>
  • Replaces John Deere OEM number RE235000, RE170092, AL77303, RE55216< li>
  • Rod Diameter: 0.315"< li>
  • Cylinder Diameter: 0.709"< li>
  • Piston Length: 8.268"< li>
  • Overall Length: 19.685"< li>
  • Rod End Fitting Nylon Eyelet < li> < UL> (Part No: 113358)
$14.99
Gas Strut Spring Cylinder - Tilt Steering Wheel -
  • For John Deere tractor models 5220, 5320, 5420, 5520, 5603, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6330, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6430, 6500, 6500L, 6510, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7410, 7420, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Compatible with John Deere Construction & industrial models 3200, 3215, 3220, 3400, 3415, 3420, 3800< li>
  • Replaces John Deere OEM number RE152042, RE151217, RE50227, AL150755, AL115780< li>
  • For Strut only use Item #: 140572< li> < UL> (Part No: 114696)
$59.00
Gas Strut Spring Cylinder - Tilt Steering Wheel -
  • For John Deere tractor models 5055E, 5065E, 5065M, 5075E, 5075M, 5076E, 5080R, 5080RN, 5082E, 5083E, 5083EN, 5085E, 5085M, 5090E, 5090EH, 5090R, 5090RN, 5093E, 5093EN, 5095M, 5095MH, 5100M, 5100MH, 5100R, 5100RN, 5101E, 5101EN, 5105M, 5105ML, 5115M, 5115ML, 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 5620, 5625, 5720, 5725, 5820, 6090MC, 6090RC, 6100MC, 6100RC, 6110MC, 6110RC< li>
  • Replaces John Deere OEM number SJ10177, RE212851, RE225080< li>
  • Pin and Screws NOT included< li> < UL> (Part No: 164473)
$129.15
Gas Strut Spring Cylinder, Tilt Steering Wheel -
  • For John Deere Construction & industrial models TC44H, TC54H, TC62H, 300D, 310D, 310E, 310SE, 315D, 315SE, 410D, 410E, 444H, 444HLL, 444J, 444JR, 510D, 544H, 544HLL, 544J, 624H, 624HLL, 624J, 644H, 710D, 724J, 744H, 744J, 824J, 844J< li>
  • Replaces John Deere OEM number AT160662, AT220225< li> < UL> (Part No: 125358)
$57.00
Grill Assembly - This is a new Grill Assembly for John Deere 5415, 5415H, 5715, 5715HC, 6010, 6100, 6110, 6110L, 6200, 6200L, 6205, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6505, 6510L, 6510S, 6605, 6800, 6810, 6900, 6910, 7405, 7500, SE6010, SE6110, SE6310, SE6510, SE6610. Replaces OEM numbers AL112107, L78698, L111759 (Part No: 162705)		$124.00
Grill Center Plate - For tractor models 50 before SN# 29199. Grill Center Plate with clips, 7 8" hole. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179498)$82.00
Grill Center Plate - For tractor models 50 after SN# 29200, 520, 530. Grill Center Plate with clips has 1 1 8" hole. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180690)		$82.00
Grill Center Plate - With Clips - 7 8 Hole For 60 (To S#54499), 70. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AA5319R (Part No: 179815)		$82.00
Grill Center Plate - With Clips - 1 1 2 Hole For 60 (From S#54500), 620, 630, 720, 730. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179272)		$82.00
Grille -
  • For John Deere tractor models 755, 855, 955< li>
  • Replaces John Deere OEM number AM107864, AM104995< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 126133)
$355.00
Grille -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8200, 8200T, 8210, 8210T, 8300, 8300T, 8310, 8310T, 8400, 8400T, 8410, 8410T< li>
  • Replaces John Deere OEM number RE58883< li> < UL> (Part No: 140643)
$345.00
Grille -
  • For John Deere tractor models 670, 770, 790, 870, 970, 990, 1070, 3005, 4005< li>
  • Replaces John Deere OEM number AM876800< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 162301)
$149.00
Grille -
  • For John Deere tractor models SE6510, SE6610, 6205, 6505, 6506, 6510, 6600, 6605, 6610, 6800, 6810, 6900, 6910< li>
  • Replaces John Deere OEM number L80035< li> < UL> (Part No: 164179)
$85.00
Grille Frame -
  • For John Deere tractor models SE6010, SE6110, SE6210, SE6310, SE6410, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6505, 6510L, 6510S, 6605< li>
  • Replaces John Deere OEM number L111759< li>
  • For assembly use Item #: 162834< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 163520)
$74.00
Grille Frame -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510< li>
  • Replaces John Deere OEM number R114897< li>
  • Frame only< li> < UL> (Part No: 168327)
$213.00
Grille Screen -
  • For John Deere tractor models SE6010, SE6110, SE6210, SE6310, SE6410, 6110, 6110L, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6310S, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6500, 6500L, 6505, 6510L, 6510S, 6605< li>
  • Replaces John Deere OEM number L78698< li>
  • For grille assembly use Item #: 163520< li> < UL> (Part No: 162834)
$57.70
Grille Screen - Left Hand -
  • For John Deere tractor models 2840, 3030 (s n 182150-later), 3130 (s n 182150-later)< li>
  • Replaces John Deere OEM number AR72860< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 161187)
$269.00
Grille Screen - Right Hand -
  • For John Deere tractor models 2840, 3030 (s n 182150-later), 3130 (s n 182150-later)< li>
  • Replaces John Deere OEM number AR72859< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 161186)
$269.00
Grill, LH - Left Hand with Screen For G (From S#13000). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179001)		$325.00
Grill, LH - Left Hand with Screen. For model H. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179002)		$232.00
Grill, RH - Right Hand with Screen For G after SN# 13000. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179010)		$325.00
Grill, RH - Right Hand with Screen For model H. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179009)		$226.00
Grill Rod - For 40, 320, 330, 420, 430. Grill Rod. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 178622)		$10.89
Grill Rod - For tractor models 50, 520, 530. Grill Rod. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180692)		$13.61
Grill Screen - One. For right or left side. You need to purchase 2 if you need both sides. For 40 Standard SN# after 69404, 40 Utility after SN# 63120, 420, 430 up to SN# 157129, 320, 330 up to SN# 330827, all without Power Steering. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 118331)		$50.00
Grill Screen - For tractor models 60, 60 Standard after SN# 6043000, 620, 630, 70, 720, 730. Screen is 21.5 inches High X 14 Inches Wide. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101930)		$58.23
Grill Screen - For one piece wrap-around style For R, 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 112563)		$107.70
Grill Screen - For one side For 40 Crawler S# 60001 & Up, 40 Standard S#60001 to 69403, 40 Utility S# 60001 to 63119, 420 Crawler, and 430 Crawler. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109503)		$109.20
Grill Screen - For tractor models 330 S#330828 and up, 430 S#157130 and up. For 1 side. Tractor requires 2. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 184790)$52.50
Grill Screen - Grill Screen measures 29 3 4 inches x 21-3 8 inches. For tractor models AO, AR, and 620 Standard, (60 standard up to SN# 6042999). Pleated Screen. (Flanges are not included)Replaces OEM# A3724R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126668)		$99.00
Grill Screen - For one side For B, and H. These ARE PRE-FORMED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 112106)		$70.00
Grill Screen - For M. Grill Screen, right or left hand side. Replaces AM747T, M314T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109924)		$58.00
Grill Screen - For D Styled. Grill Screen. (Part No: 180609)		$84.00
Grill Screen - Left Hand For 435 Diesel. Replaces AT11540T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126549)$96.00
Grill Screen, Left - For Left side For 435 Diesel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AT11540T)$62.03
Grill Screen- Right - For Right side For 435 Diesel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126542)$99.00
Grill Spring - For tractor models 940, 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 2840, 2950, 3030, 3040, 3120, 3130, 3140, 3150. Replaces L40645. (Part No: 113710)		$4.06
Guard - For tractor models 1207, 1209, 1214, 1380, 350, 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 163427)$13.26
Handle -
  • For John Deere tractor models 4030, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8450, 8560, 8570, 8650, 8760, 8770, 8850, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number RE15118, R78991< li> < UL> (Part No: 150267)
$17.76
Handrail - Left Hand -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Easy to install with no holes to drill< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For Step Kit use Item #: 109395< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 108968)
$74.70
Handrail - Right Hand -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620< li>
  • Compatible with John Deere Hay Cutting(s) 2420< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Durable green powder coat finish< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For Step kit use Item #: 114447< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114445)
$61.76
Headliner Kit, Black - For tractor models 2840, 2940, (30 series with sound guard cab SN# up to 205843), 3040, 3640, (40 series with sound guard cab SN# up to 185706), 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. (Part No: 109453)$238.00
Headliner, Tan - For tractor models (2155, 2255, 2355, 2555, 2755, 2855, 2955, 3155, 3255 all for cabs with speakers in the corner not flush behind), 4055, 4255, 4455, 4555, 4755, 4955. This part ships truck freight. (Part No: 112893)$315.00
Hood Bolt Kit -
  • For John Deere tractor models A (sn:477000 - 586999), B (sn:60000 - 200999)< li>
  • For electric start, long hood tractors only< li>
  • For hood, grilles & battery covers< li> < UL> (Part No: 117519)
$45.76
Hood Fastener Kit - For tractor models M, 40, 320, 330, 420, 430. Kit contains 9 short fasteners, 2 long fasteners, 11 pins & 2 rubber bumpers. Replaces M316T, M322T, M1605T. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 178999)		$77.00
Hood Late Unstyled - Long Frame Hood, includes brackets. For model B from SN# 42200 to 59999. (Part No: 179247)		$250.00
Hood Lift Cylinder -
  • For John Deere tractor models 6170R, 6190R, 6210R< li>
  • Replaces John Deere OEM number AL214376< li>
  • Length: 16.142" (compressed) 26.575" (extended)< li>
  • Rod Diameter: .394"< li>
  • Outside Diameter: .866"< li> < UL> (Part No: 172722)
$43.10
Hood Patch - Weld-on Style Patch is approximately 7 inches x 7 inches and has a 4-1 4 inch hole. Used when converting to a thru-hood exhaust. Used on A, G, 60. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 113997)		$29.95
Hood - Round Exhaust Hole - Replaces John Deere OEM nos AR41148, AR26564. This hood has round exhaust hole and is without air stack hole. Used on John Deere 3010, 3020 serial number 122999 and earlier. For a hood with air stack hole order 179011. Additional $60.00 shipping due to weight. This additional charge will be added to your order. (Part No: 135050)		$600.00
Hood Side Grille Louver - LH -
  • For John Deere tractor models 6530, 6630, 6930, 7430, 7530, 7930< li>
  • Replaces John Deere OEM number AL174454< li>
  • Fits left hand side< li>
  • For right hand side use Item #: 170039< li> < UL> (Part No: 170040)
$93.10
Hood Side Grille Louver - RH -
  • For John Deere tractor models 6530, 6630, 6930, 7430, 7530, 7930< li>
  • Replaces John Deere OEM number AL174453< li>
  • Fits right hand side< li>
  • For left hand side use Item #: 170040< li> < UL> (Part No: 170039)
$93.10
Light Housing - LH - This Front Light Housing is used on John Deere models 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2950, 2955, 3050, 3055, 3150, 3155, 3255, 3350, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4630, 4650, 4755, 4850, 4955. Comes with screws. Replaces part numbers AR84970, R80697, R81697 (Part No: 121577)		$54.99
Light Housing - RH - This Front Light Housing is used on John Deere models 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2950, 2955, 3050, 3055, 3150, 3155, 3255, 3350, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4630, 4650, 4755, 4850, 4955. Comes with screws. Replaces part numbers R81696, AR84969 (Part No: 121578)		$54.99
Mirror Assembly, Left Hand, Telescopic -
  • For John Deere tractor models 5220, 5225, 5320, 5325, 5420, 5425, 5520, 5525, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6320 (Europe), 6400, 6403 (Mexico, Soth Africa, Asia), 6403, 6405, 6410, 6415, 6420, 6420 (Europe), 6420S (Europe), 6500, 6603 (Mexico, Soth Africa, Asia), 6603, 6605, 6615, 6715, 7220, 7320, 7420, 7520, 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810< li>
  • Compatible with John Deere Harvester(s) 3950 (Pull Type), 3955 (Pull Type), 3970 (Pull Type), 3975 (Pull Type)< li>
  • Compatible with John Deere Baler(s) 335 (Round Baler), 375 (Round Baler), 385 (Round Baler), 435 (Round Baler), 446 (Round Baler), 456 (Round Baler), 466 (Round Baler), 535 (Round Baler), 546 (Round Baler), 556 (Round Baler), 566 (Round Baler)< li>
  • Replaces John Deere OEM number AL80126< li>
  • For Left Hand Arm Only use Item #: 115375< li> < UL> (Part No: 170038)
$140.00
Mirror Assembly, Right Hand, Telescopic -
  • For John Deere tractor models 5220, 5225, 5320, 5325, 5420, 5425, 5520, 5525, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320 (Europe), 6320, 6400, 6403 (Mexico, South Africa, Asia), 6403, 6405, 6410, 6415, 6420 (Europe), 6420, 6420S (Europe), 6500, 6603 (Mexico, South Africa, Asia), 6603, 6605, 7220, 7320, 7420, 7520, 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810< li>
  • Compatible with John Deere Harvester(s) 3950 (Pull Type), 3955 (Pull Type), 3970 (Pull Type), 3975 (Pull Type)< li>
  • Compatible with John Deere Baler(s) 335 (Round Baler), 375 (Round Baler), 385 (Round Baler), 435 (Round Baler), 446 (Round Baler), 456 (Round Baler), 466 (Round Baler), 535 (Round Baler), 546 (Round Baler), 556 (Round Baler), 566 (Round Baler)< li>
  • Replaces John Deere OEM number AL80127< li>
  • For Mirror Head Only use Item #: 170041< li> < UL> (Part No: 170042)
$140.00
Mirror - Excavator -
  • For John Deere Construction & industrial models 450C (LC), 450DLC, 550LC, 600C LC, 650DLC, 750, 800C, 850DLC< li>
  • Replaces John Deere OEM number 4418912< li>
  • John Deere Excavator Mirror< li> < UL> (Part No: 163047)
$71.00
Mirror Head - 6.25" x 12" -
  • For John Deere Construction & industrial models 70, 70D, 75G, 80, 85G, 110, 120, 120C, 120D, 130G, 135D, 135G, 160C LC, 160DLC, 160LC, 190E, 200CLC, 200DLC, 200LC, 210G, 210GLC, 225DLC, 230CLC, 230LC, 230LCR, 240DLC, 245GLC, 270DLC, 270LC, 290D, 330CLC, 330LC, 330LCR, 350DLC, 370, 370C, 450LC, 490, 490E, 590D, 595, 595D, 790, 790D, 790ELC, 792, 892ELC, 992ELC, 2054, 2154, 2554, 3554, 3754G
  • Replaces John Deere OEM number 4420724< li> < li>
  • Compatible with Kobelco Construction & industrial models SK30UR
  • Replaces Kobelco OEM number PY02C01079P1< li> < li>
  • Compatible with Komatsu Construction & industrial models PC27R-6, PC30-7, PC30MR-3, PC35MR-3, PC40-7, PC45MR-3, PC55MR-3, PC58UU-3, PC60-5, PC60-6, PC60-7, PC60U-5, PC75UU-3, PC78US-6, PC80MR-3, PC100-5, PC100-6, PC120-5, PC120-6, PC120-6Z, PC120LC-6, PC128US-3, PC130-6, PC150-3, PC150-5, PC150LC-3, PC150LC-5, PC160-7, PC180LC-3, PC200LC-6, PC200LC-7, PC200-5, PC200-6, PC200-7, PC200EN-6K, PC200LC-5, PC200LC-5C, PC200LC-6Z, PC210-6, PC220-6, PC210-6K, PC210-7K, PC210LC-5K, PC210LC-6, PC210LC-6K, PC210LC-7K, PC220LC-6, PC220-6Z, PC220-5, PC220-7, PC220LC-5, PC220LC-6Z, PC220LC-7, PC228US-3, PC228USLC-3EO, PC230-6, PC240LC-6K, PC240NLC-5K, PC240NLC-6K, PC250-6, PC250LC-6LE, PC250LC-6, PC300-6, PC300HD-6, PC300LC-6, PC300LC-6LC, PC300LC-6LE, PC340LC-6J, PC340LC-6K, PC340NLC-6K, PC340-6K, PC400-5, PC400-6Z, PC400-7, PC400LC-5, PC400LC-6, PC450-7K, PC600LC-6, PW130-6K< li>
  • Replaces Komatsu OEM number 20Y-54-28911, 08174-13118< li>
  • 8.5" x 12"< li>
  • Clamps on a 1 2" diameter rod< li> < UL> (Part No: 163052)
$39.76
Mirror - John Deere -
  • For John Deere Construction & industrial models 75G, 85G, 130G, 135G, 160GLC, 180GLC, 210G, 210GLC, 225DLC, 245GLC, 250GLC, 290GLC, 350GLC, 380GLC, 470GLC, 670GLC, 870GLC< li>
  • Replaces John Deere OEM number 4675257< li>
  • John Deere Excavator Mirror< li>
  • Clamps on a 1" diameter rod< li>
  • 9" x 12" < li> < UL> (Part No: 163051)
$52.00
Mirror Kit - Cab -
  • For John Deere tractor models 5055E, 5065E, 5065M, 5075E, 5075M, 5083E, 5085M, 5100M, 5101E, 5115M, 6020, 6330, 6410, 6420, 6510, 6520, 6530< li>
  • Includes: (2) large 7" x 12" mirrors, (2) Fixed Arms, mounting hardware< li> < UL> (Part No: 169278)
$75.00
Mirror Kit - Cab, Left or Right -
  • For John Deere tractor models 5055E, 5065E, 5065M, 5075E, 5075M, 5083E, 5085M, 5093E, 5100M, 5101E, 5115M, 6020, 6330, 6410, 6420, 6510, 6520, 6530< li>
  • Designed for cab equipped John Deere tractors< li>
  • Fits left or right side of cab< li>
  • Includes: (1) large 7" x 12" mirror, (1) fixed arm, mounting hardware< li> < UL> (Part No: 169279)
$41.00
Mirror Kit - John Deere -
  • For John Deere tractor models 7810, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430, 8440< li>
  • Fits John Deere tractor models 8360, 8370< li>
  • Includes (2) 8"x15.5" mirrors, (2) brackets (left and right) (2) extension arms, (2) braces, (2) hardware packages< li> < UL> (Part No: 169265)
$300.00
Mirror Kit - Left -
  • For John Deere tractor models 7810, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430, 8440< li>
  • Fits John Deere tractor models 8360, 8370< li>
  • Includes: (1) 8"x15.5" mirror, (1) bracket, (1) extension arm, (1) brace, (1) hardware packages< li> < UL> (Part No: 169269)
$160.00
Mirror Kit - Right -
  • For John Deere tractor models 7810, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430, 8440< li>
  • Fits John Deere tractor models 8360, 8370< li> < UL> (Part No: 169272)
$160.00
Mirror, Telescoping Arm Only, Left Hand, Outer -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5220, 5225, 5320, 5325, 5420, 5520, 6030, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6320 (Europe), 6400, 6403, 6403 (Mexico, South Africa, Asia), 6405, 6410, 6415, 6420, 6420 (Europe), 6420S (Europe), 6500, 6603, 6603 (Mexico, South Africa, Asia), 6605, 6615, 6715, 7220, 7320, 7420, 7520, 7600, 7610 (s n 089999-earlier), 7700, 7710 (s n 089999-earlier), 7710 (s n 090000-later), 7800, 7810 (s n 089999-earlier), 7810 (s n 090000-later), 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 3950 (Pull Type), 3955 (Pull Type), 3970 (Pull Type), 3975 (Pull Type)< li>
  • Compatible with John Deere Baler(s) 335 (Round Baler), 375 (Round Baler), 385 (Round Baler), 435 (Round Baler), 446 (Round Baler), 456 (Round Baler), 466 (Round Baler), 535 (Round Baler), 546 (Round Baler), 556 (Round Baler), 566 (Round Baler)< li>
  • Replaces John Deere OEM number AL77483< li>
  • Does not include mirror< li>
  • For Complete LH Mirror Assembly use Item #: 115375< li> < UL> (Part No: 170033)
$99.86
Mirror, Telescoping Arm Only, Right Hand, Outer -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5220, 5225, 5320, 5325, 5420, 5425, 5520, 5525, 6030, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6320 (Europe), 6320, 6400, 6403, 6403 (Mexico, South Africa, Asia), 6405, 6415, 6420 (Europe), 6420, 6420S (Europe), 6500, 6603, 6603 (Mexico, South Africa, Asia), 6605, 6615, 6715, 7220, 7320, 7420, 7520, 7600, 7610 (s n 089999-earlier), 7700, 7710, 7800, 7810, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Harvester(s) 3950 (Pull Type), 3955 (Pull Type), 3970 (Pull Type), 3975 (Pull Type)< li>
  • Compatible with John Deere Baler(s) 335 (Round Baler), 375 (Round Baler), 385 (Round Baler), 435 (Round Baler), 446 (Round Baler), 456 (Round Baler), 466 (Round Baler), 535 (Round Baler), 546 (Round Baler), 556 (Round Baler), 566 (Round Baler)< li>
  • Replaces John Deere OEM number AL77484< li>
  • For Mirror Head Only use Item #: 170033< li> < UL> (Part No: 170041)
$99.86
Nose Cone - Replacement nose cone is made of a reinforced fiberglass material which will give great resistance to impact and vibration cracking.Does not come with hardware. Used on 1030, 1130, 1630, 1830 serial number 181606 and above, 2030 serial number 181606 and above, 2040 below serial number 349999, 2130 Serial number 181606 and above, 2240 below serial number 349999, 2440 below serial number 349999, 2640 below serial number 349999, 830 3 Cylinder (European Edition), 930 (European Edition). Parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103966)		$56.00
Nose Cone -
  • For John Deere tractor models 2440 (s n 341000-later), 2640 (s n 341000-later)< li>
  • Compatible with John Deere Construction & industrial models 480C< li>
  • Replaces John Deere OEM number R74971< li> < UL> (Part No: 109391)
$175.00
Nose Cone -
  • For John Deere tractor models 670, 770, 870, 970, 1070, 3005, 4005< li>
  • Replaces John Deere OEM number LVU802875, M805036< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 146689)
$101.00
Nose Cone - For 2040, 2240, both after serial number 349999. For 2940, 4030, 4040, 4230. Dimensions: 11 inches tall x 21 inches wide x 2-1 2 inches in depth. Nose Cone is fiberglass and needs painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103967)		$72.00
Nose Screen - For model 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 109568)$119.50
Nose Screen - For tractor models 5010, 5020, 6030, 7520. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110906)		$144.95
Partition Panel, Battery & Gauge - For model A with electric start from SN# 477000 to 583999. (Part No: 179855)		$38.26
Pilot Punch Set - Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16 and 1 2. (Part No: 186563)		$146.94
Platform - Does NOT have dimmer switch hole. For tractor models 2520, (3020 row crop and high crop from SN# 123000 and above), (4000 row crop and high crop from SN# 201000 and above), (4010 row crop from SN# 001000 and above & Standard From SN# 020200 and above), (4020 row crop and high crop from SN# 201000 and above & syncro range from SN# 065000 to 090999), (4320 row crop). Replaces AR40672, AR48004. (Part No: 116933)		$255.00
Platform Extension - Left Hand For 60, 620, 630 Standard. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 182196)		$78.00
Platform Extension - Right Hand For 60 Standard. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AA6208R (Part No: 180140)		$64.35
Platform Extension - Left Hand For 70 Diesel Standard. OEM# AF2266R, AF2349R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180004)		$64.35
Platform Extension - Left Hand For 720 (From S#7214900), 730 Standard. Replaces OEM# AF3818R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179764)		$65.00
Platform Extension - Right Hand For 720, 730 Standard. Replaces OEM# AF2807R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179729)$62.32
Rear Fender Extension, Long - LH -
  • For John Deere tractor models 6110, 6110L, 6200, 6210, 6210L, 6300, 6310, 6310L, 6400, 6405, 6410, 6410L, 6500, 6510L, 6605< li>
  • Replaces John Deere OEM number L101649< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For right hand use Item #: 160513< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160514)
$104.00
Rear Fender Extension, Long - RH -
  • For John Deere tractor models 6110, 6110L, 6200, 6210, 6210L, 6300, 6310, 6310L, 6400, 6405, 6410, 6410L, 6500, 6510L, 6605< li>
  • Replaces John Deere OEM number L101643< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For left hand use Item #: 160514< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 160513)
$104.00
Rear Fender - Set -
  • For John Deere tractor models SE6010, SE6100, SE6110, SE6200, SE6210, SE6300, SE6310, SE6400, SE6410, SE6510, SE6610, 5415, 5425 (s n 002631 - earlier), 5615, 5625 (s n 001688 - earlier), 5715, 5725 (s n 005048 - later), 6010, 6100, 6100D, 6105D (Engine: 4045HP056), 6105E (Engine: 4045HP073), 6110, 6110D, 6110L, 6115D (Engine: 4045HP056), 6120E (Engine: 4045HP073), 6125D, 6200, 6200L, 6210, 6210L, 6300, 6300L, 6310, 6310L, 6400, 6400L, 6400SP, 6403, 6405, 6410, 6410L, 6500, 6500L, 6510, 6510L, 6600, 6603, 6605, 6800, 6900, 7405, 7500< li>
  • Replaces John Deere OEM number L77510, L77511< li>
  • Includes Right and Left Rear Fender< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 158409)
$290.00
Rear Side Panels - Right Hand and Left Hand -
  • For John Deere tractor models 5010, 5020, 6030 (all less cab)< li>
  • Replaces John Deere OEM number AR53645, AR53646< li>
  • Contains: Left & Right Hand Sides< li>
  • Restoration quality< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 156503)
$870.00
Rear Side Shield - Left Hand For 3010, 3020 (To S#122999). Shield comes with Pins, Clips and Springs. Replaces OEM# AR26851. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101947)		$83.20
Rear Side Shield - Right Hand For 3010, 3020 (To S#122999). Shield comes with Pins, Clips and Springs. Replaces OEM# AR26850. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101946)		$99.30
Rear Side Shield - Left Hand For 3020 (From S#123000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101949)$63.20
Rear Side Shield - Right Hand For 3020 (From S#123000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101948)$64.00
Rear Side Shield - Left Hand For 4040, 4230. Shield comes with Pins, Clips and Springs. Replaces AR82261 AR62261. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101955)$79.00
Rear Side Shield - Right Hand For 4040, 4230. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101954)$79.00
Rear Side Shield - Left Hand For 4050 (To S#5510), 4240, 4430. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101961)$62.00
Rear Side Shield - Right Hand For 4050 (To S#5510), 4240, 4430. Shield comes with Pins, Clips and Springs. (Part No: 101960)$62.00
Rear Side Shield - Left Hand For 4050 (From S#5511), 4055, 4250, 4255, 4440, 4450, 4455. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101963)$62.00
Rear Side Shield - Right Hand For 4050 (From S#5511), 4055, 4250, 4255, 4440, 4450, 4455, 4630. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101962)$58.70
Rear Side Shield - Left Hand For 4320. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101957)$75.00
Rear Side Shield - Right Hand For 4320. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101956)$84.00
Rear Side Shield, Left Hand - Left Hand For 4520. Replaces OEM # AR43291. Shield is flat and comes with Pins, Clips and Springs. Not for late models that use the curved cover to go around inner-cooler. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101959)		$83.00
Rear Side Shield, LH, Early - For tractor models 4010, 4020 SN# before 200999. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101951)		$63.00
Rear Side Shield, LH, Late - Left side. For tractor models 4000, 4020 both after SN# 201000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101953)		$55.00
Rear Side Shield, RH, early - For tractor models 4010, 4020 SN# before 200999. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101950)		$75.13
Rear Side Shield, RH, Late - Right Side For tractor models 4000, 4020 both after SN# 201000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101952)		$55.00
Rear Side Shield, Right Hand - Right Hand For 4520, 4620. Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101958)		$83.00
Right Hand & Left Hand Fender Set -
  • For John Deere tractor models 7600 (Tractors with Regular Fender Extension), 7610 (Tractors with Short Fender Extension), 7700 (Tractors with Regular Fender Extension), 7710 (Tractors with Short Fender Extension), 7800 (Tractors with Regular Fender Extension), 7810 (Tractors with Short Fender Extension), 8100 (Tractors with Regular Fender Extension, s n 010000-earlier), 8110 (Tractors with Regular Fender Extension), 8200 (Tractors with Regular Fender Extension, s n 010000-earlier), 8210 (Tractors with Regular Fender Extension), 8300 (Tractors with Regular Fender Extension, s n 010000-earlier), 8310 (Tractors with Regular Fender Extension), 8400 (Tractors with Regular Fender Extension, s n 010000-earlier), 8410 (Tractors with Regular Fender Extension)< li>
  • Replaces John Deere OEM number R157015, R157016, R114685, R114686< li>
  • Set includes 1 Right Hand Fender and 1 Left Hand Fender< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 170719)
$1225.00
Rockshaft Cover, LH - With tool box. For tractor models 2520, (3020 from serial number 123000 and up), 4000, (4020 from serial number 201000 and up), 4320. (Part No: 110688)		$179.99
Rockshaft Cover, RH - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: 108517)		$127.99
Rockshaft Cover without Tool Box - Left Hand -
  • For John Deere tractor models 2520, 3020 (s n 201001-later), 4000, 4020 (s n 201001-later), 4320< li>
  • Replaces John Deere OEM number AR40817< li>
  • Fits Left Hand Side, Tool Box Not Included< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • For 3 piece set less tool box use Item #: 110688< li> < UL> (Part No: 108516)
$148.00
Rockshaft Support - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: 108520)		$48.30
Roof Panel -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, SE6610, SE6620, 6010, 6020, 6100, 6105M, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6420S, 6500, 6506, 6510, 6520, 6600, 6610, 6620, 6800, 6810, 6820, 6900, 6910, 6910S, 6920, 6920S< li>
  • Replaces John Deere OEM number AL80023, AL79092, L217781< li>
  • Roof Panel< li>
  • 47.16" X 33.80"< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 155843)
$325.00
Rubber Strap - Step Support -
  • For John Deere tractor models 7830, 7930, 8235R, 8260R, 8285R, 8295RT, 8310R, 8310RT, 8320RT, 8335R, 8335RT, 8345RT, 8360R, 8360RT, 8370RT, 9430T, 9460RT, 9510RT, 9530T, 9560RT, 9630T< li>
  • Replaces John Deere OEM number R344084< li> < UL> (Part No: 156002)
$49.42
Sheet Metal Bolt Kit - For model (G sn 13000 to 25999), (GM 13000 to 25999), for hood, grill. (Part No: 117520)		$30.76
Side Cover, LH - For tractor models 1830, 2020, 2030, 2120, 2130, 2640. Replaces T22210. (Part No: 101945)		$45.00
Side Cover, RH - For tractor models 1830, 2020, 2030, 2120, 2130, 2640. Replaces T22209. (Part No: 101944)		$45.00
Side Cover - Right - For 1830, 2020, 2030, 2120, 2130, 2640. Right Side Cover Sheet Metal. ********DUP********* Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101944)$45.00
Side grill panel - Side grill panel, for tractors: 3010, 3020, two(2) used per tractor. For 3010, 3020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101933)		$67.20
Side Moulding - With Decal - Left Hand For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 118577)$122.00
Side Panel, Front, Left - For tractor models 3010, 3020. (Part No: 101965)$124.50
Side Panel, Front, Right - For tractor models 3010, 3020. (Part No: 101964)$124.50
Side Panel - Left Hand -
  • For John Deere tractor model 2520< li>
  • Replaces John Deere OEM number AR38839< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 152034)
$213.00
Side Panel - Left Hand -
  • For John Deere tractor models 6110L, 6200L, 6210L, 6300L, 6310L, 6310S, 6400L, 6405, 6410L, 6410S, 6500L, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL78283< li>
  • With Vertical Muffler on Left Hand Side< li>
  • For Right Hand Side use Item #: 169437< li> < UL> (Part No: 169451)
$190.00
Side Panel - Left Hand -
  • For John Deere tractor models 6110L, 6200L, 6210L, 6300L, 6310L, 6310S, 6400L, 6405, 6410L, 6410S, 6500L, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL78281< li>
  • Fits Left Hand Side< li>
  • For Right Hand Side use Item #: 169452< li> < UL> (Part No: 169454)
$265.00
Side Panel - Right Hand -
  • For John Deere tractor models 6110L, 6200L, 6210L, 6300L, 6310L, 6310S, 6400L, 6405, 6410L, 6410S, 6500L, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL78282< li>
  • Fits Right Hand Side< li>
  • For Left Hand Side use Item #: 169451< li> < UL> (Part No: 169437)
$265.00
Side Panel - Right Hand -
  • For John Deere tractor models 6110L, 6200L, 6210L, 6300L, 6310L, 6310S, 6400L, 6405, 6410L, 6410S, 6500L, 6510L, 6510S< li>
  • Replaces John Deere OEM number AL110616< li>
  • Fits Right Hand Side with Horizontal Exhaust < li>
  • For Left Hand Side use Item #: 169454< li> < UL> (Part No: 169452)
$125.00
Side Plate - Left Hand -
  • For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4400, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520< li>
  • Replaces John Deere OEM number R31513< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 126553)
$29.26
Side Screen - Side grill panel, 26-1 4x22-3 4. For tractors: 4240, 4430. Replaces AR55022. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101938)		$125.40
Side Screen - Side grill panel, 26-1 4x22-3 4. For tractors: 4240, 4430. Replaces AR55022. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 101939)		$127.95
Side Screen - Side grill panel, 32-1 4x24-3 4. For tractors: 4840. For 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101940)$131.27
Side Screen - This Side Screen is the same for Right and left Side. Measures 16 3 4 x 17 1 2 inches. Powder coated black. For tractor models 1640, 1840, 2040, 2040S, 2350, 2550. Replaces AL37083, AL56766. (Part No: 118498)$89.80
Side Screen - Powder coated black, 16-3 4" x 19-1 2", For tractor models 2140, 2750. Replaces, 31251, 37082, 55319. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 118497)$80.00
Side Screen - For tractor models 6030, 7520. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AR53791 (Part No: 167140)		$143.00
Side Screen - 17.750" high, 12.750" wide. For tractor models 50, 520, 530. (Part No: 101929)$50.00
Side Screen - For tractor models 4520, 4620. Measures 23 1 4 x 23 1 4. (Part No: 110026)$169.80
Side Screen - POWDER COAT GREEN 13 3 4 inches x 17 inches. For 820 (German), 830, 1020, 1530, 2040, 2240. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. 2 used per tractor. (Part No: 101931)		$63.00
Side Screen - Side grill panel, 17x17. For tractors: 1520, except low profile, 2020 except low profile, 2030, 2440 to serial number 340999, 2630, 2640 to serial number 340999. Replaces AT19880. For 1010, 2010, 2510, 3010, 3020, 4010, 4020. Replaces OEM# AR72950, AT19880. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101932)		$62.90
Side Screen - Left Hand - 18 1 2 x 13 7 8 with Knob For 2155, 2355N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104089)$113.90
Side Screen - Right Hand - 18 1 2 x 13 7 8 with Knob For 2155, 2355N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104088)$115.50
Side Screen - 19 1 2 x 17 with Knob. For tractor models 2355, 2555, 2755, 2855N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104090)$101.00
Side Screen - 17 x 17 For 2510, 2520. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104091)$101.00
Side Screen - 22 1 4 x 20 1 2 For 2940, 2950, 3040, 3140, 3150. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104092)$122.00
Side Screen - 22 1 2 x 20 3 4 with Knob. For tractor models 2955, 3055, 3155, 3255. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104093)$133.00
Side Screen - 19 x 18 For 3010, 3020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101933)$67.20
Side Screen - Side grill panel, 17 x 19-3 4. For tractors: 4000, 4010, 4020. Two(2) used per tractor. Sold individually. Replaces AR26539. For 1010, 2010, 3010, 3020, 4010, 4020, 5010. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101934)		$101.30
Side Screen - 20 x 22 1 4 For 4030. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101936)$122.00
Side Screen - 21 x 24 For 4040, 4230. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaced AR65459. 23.875 inches x 21 inches. (Part No: 101937)		$110.90
Side Screen - 26 1 4 x 24 3 4 with Wire Clamp & Knob. For tractor models (4050 SN# 5511 and up), 4055, 4250, 4255, 4450, 4455. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101941)		$128.00
Side Screen - 21 x 20 3 4 For 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101935)$95.94
Side Screen - 22 x 24 For 8430, 8440, 8630, 8640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101942)$112.30
Side Screen - 24 x 19 1 4 For 8450, 8650. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101943)$92.00
Side Screen Knob - For tractor models 1550, (4050 from SN# 5511), 4050, 4055, 4250, 4255, 4450, 4455, 2355, 2555, 2755, 2855N, 2955, 3055, 3155, 3255, 2155, 2355N, 3050, 3350, 2650, 2650N, 2850, 2250, 2450, 1650, 1750, 1850, 1950, 1950N, 3650, 3150, 6300, 6500, 6600. (Part No: 179662)		$6.66
Side Screen Left Hand - Used on the left side of models 5200, 5300, 5400, 5400N, 5500N, this screen replaces OEM numbers RE66041, RE40813. For the right side, order 170254 (Part No: 170255)		$98.99
Side Screen - LH -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE12882< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 109715)
$409.50
Side Screen, LH - Louvered. For tractor models 5020, 6030. (Part No: 180030)		$235.00
Side Screen, LH - Fits tractors with mechanical front wheel drive. For tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960. (Part No: 109717)$310.00
Side Screen - RH -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 (all 2 wheel drive)< li>
  • Replaces John Deere OEM number RE12881< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 109716)
$440.00
Side Screen, RH - Louvered. For tractor models 5020, 6030. (Part No: 180031)		$235.00
Side Screen, RH - Fits tractors with mechanical front wheel drive. For tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960. (Part No: 109718)$332.20
Side Screen Right Hand - Used on the left side of models 5200, 5300, 5400, 5400N, 5500N, this screen replaces OEM numbers RE66040, RE40812. For the left side, order 170255 (Part No: 170254)		$94.99
Side Shield, Front - Left Hand -
  • For John Deere tractor models 4555, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Replaces John Deere OEM number AR82257< li>
  • Fits Front on Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 112561)
$81.00
Side Shield, Front, LH - For tractor models 4000, 4010, 4020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101967)		$94.50
Side Shield, Front, RH - For tractor models 4000, 4010, 4020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101966)		$116.00
Side Shield, Front - Right Hand -
  • For John Deere tractor models 4555, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Replaces John Deere OEM number AR76438< li>
  • For a used vesion of this itemuse 412558< li>
  • Fits Front on Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 112558)
$80.00
Side Shield - Left Hand -
  • For John Deere tractor model 4630< li>
  • Replaces John Deere OEM number AR59704< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li> < UL> (Part No: 128487)
$137.00
Side Shield, LH - For tractor models (4050 SN# 005511 and up), 4055, 4250, 4255, 4440, 4450, 4455. (Part No: 101963)$62.00
Side Shield, Rear, LH - For tractor models 4050, 4240, 4430. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101961)		$62.00
Side Shield, Rear, LH - Metal Side Shield. For tractor models 5010, (5020 without Hinson cab). There is an additional shipping cost for this product of $15.00 (Part No: 109778)		$240.00
Side Shield, Rear, RH - For tractor models 4050, 4240, 4430. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 101960)		$62.00
Side Shield, Rear, RH - Metal Side Shield. For tractor models 5010, (5020 without Hinson cab). (Part No: 109777)		$154.50
Side Shield, RH - For tractor models (4050 SN# 005511 and up), 4055, 4250, 4255, 4440, 4450, 4455. (Part No: 101962)$58.70
Skidder Bumper Pad -
  • For John Deere Construction & industrial models 360D (s n 604613-earlier), 460, 540E, 548E, 560D (s n 604613-earlier), 640E, 643, 648E, 740, 740E, 748E, 748G, 840, 843, 848H, 862, 3200, 3215, 3220, 3400, 3415, 3420< li>
  • Replaces John Deere OEM number AT142028< li> < UL> (Part No: 159504)
$42.00
Step - Step can be welded into place or the bracket can be drilled and the step bolted into place. This part comes primered. Color will vary from photo. Assure fit before painting. Replaces John Deere part numbers L102114, L155043 (Part No: 121724)		$29.90
Step -
  • For John Deere tractor models 2950, 3030, 3040, 3130, 3140, 3150, 4000, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4560, 4630, 4640, 4650, 4760, 4840, 4850, 4955, 4960< li>
  • Durable powder coat finish, matches original equipment color< li>
  • Convenient and easy access when fueling or servicing your tractor< li>
  • Easy to install with no holes to drill< li>
  • Hardware is included< li>
  • Step: 20" wide 7" deep< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 110548)
$104.00
Step -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510, 8430< li>
  • Compatible with John Deere Combine(s) CTSII, 6620, 9400, 9410, 9500, 9500 SH, 9510, 9510 SH, 9570 STS, 9600, 9610, 9650, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9780 CTS< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 7180, 7200, 7250, 7280, 7300, 7350, 7380, 7400, 7450, 7480, 7500, 7550, 7580, 7700, 7750, 7780, 7800, 7850, 7950, 7980< li>
  • Replaces John Deere OEM number R84943, R51109< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 121746)
$71.00
Step -
  • For John Deere Construction & industrial models 370, 410E, 444, 460, 544, 544G, 624, 624G, 644, 644G, 724, 744, 824, 844< li>
  • Replaces John Deere OEM number T260355< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 158603)
$46.00
Step Adapter Bracket - Left Hand -
  • For John Deere tractor models 1010, 1020, 2010, 2020, 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620< li>
  • Fits left hand side< li>
  • For use on equipment less cab< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • For Step Unit - Left Hand use Item #: 113386< li> < UL> (Part No: 108978)
$78.80
Step Adapter Bracket - Right Hand -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620< li>
  • Compatible with John Deere Hay Cutting(s) 2420< li>
  • Fits right hand side< li>
  • For use on equipment less cab.< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For a Right Step Unit use Item #: 114447< li> < UL> (Part No: 114446)
$75.01
Step and Handrail -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Includes: 3 steps, fourth step, mounting bracket, and hardware< li>
  • Left Hand Side Only< li>
  • Durable powder coat finish, green< li>
  • 14.5" Wide< li>
  • 6" Deep< li> < UL> (Part No: 164403)
$445.00
Step and Handrail -
  • For John Deere tractor models 8235R, 8260R, 8285R< li>
  • Fits Right Side < li>
  • Includes handrail and hardware< li>
  • Durable powder coat finish, , green< li>
  • Will fit models 2014 and newer. Will not fit dually tractors. Not recommended for tractors with ILS axles< li> < UL> (Part No: 164404)
$682.36
Step Assembly - Used on tractors with cabs, not for tractors with open operators stations, this assembly replaces OEM part numbers AL155038, AL113571, AL154911, AL82366. Used on John Deere 6010, 6020, 6110, 6120, 6210, 6215, 6220, 6230, 6310, 6320, 6330, 6405, 6410, 6415, 6420, 6430. This part comes primered. Color may vary. Assure fit before painting.. (Part No: 121725)		$102.00
Step Assembly - For 80, 820, 830. OEM# F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179454)$59.00
Step Assembly 3 Steps -
  • For John Deere tractor models 6120 (with HCS), 6220 (with HCS), 6320 (with HCS), 6420 (with HCS), 6605, 6615, 6715, 7220, 7320, 7420, 7520< li>
  • Replaces John Deere OEM number AL154912, AL156877< li>
  • Three Step Kit< li>
  • Cab step assembly, not for open operators station< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 121726)
$125.80
Step Kit - Left Hand -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955 (row crop and utility tractors)< li>
  • Open tread design for better slip resistance< li>
  • Kit includes: handrail, steps, side panels, and mounting bracket< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • To Create a 4th Step use Item #: 150801< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 108121)
$295.00
Step Kit - Left Hand -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020 (row crop and utility tractors)< li>
  • Replaces John Deere OEM number RE62856< li>
  • Open tread design for better slip resistance< li>
  • Kit Includes: handrail, steps, side panels, and mounting bracket< li>
  • Fits Left Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • To Create a 4th Step use Item #: 150801< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 108122)
$332.00
Step Pad - For tractor models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Part No: 109589)		$28.50
Step Pad - For tractor models A, 60, B, 50, G, 520, 530, 620, 630, 70, 720, 730, 80, 820, 830, 2010, 1520, 1530, 2040, 2150, 2155, 2240, 2020, 2510, 2520, 2030, 2440, 3020, 2350, 2355, 2550, 2555, 2750, 2755, 2630, 2640, 4010, 3120, 4020, 2840, 4050, 4000, 4230, 4320, 4520, 4620, 4430, 4240, 4440, 4250, 4255, 5010, 5020, 6030, 8650, 920, 1120, 8850, 2130, 8450, 2120, 1830, 8020. (Part No: 109589)		$28.50
Step Support Hanger Straps -
  • For John Deere tractor models 7210R (s n 080001-later), 7230R (s n 080001-later), 7250R (s n 080001-later), 7270R (s n 080001-later), 7290R (s n 080001-later), 7310R (s n 080001-later), 8245R (s n 090001-later), 8270R (s n 090001-later), 8295R (s n 090001-later), 8320R (s n 090001-later), 8335R (s n 090001-later), 8345R (s n 090001-later), 8370R (s n 090001-later)< li>
  • Replaces John Deere OEM number R542428< li>
  • Sold as a pair< li>
  • Hardware not included< li> < UL> (Part No: 150378)
$67.00
Step Unit -
  • For John Deere tractor models 3020, 4020, 4320, 4520 (all with Hinson cab)< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Left Hand Rail use Item #: 109570< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114451)
$360.00
Step Unit - Early Hiniker Cab -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all with early Hiniker cab or Stolper cab less Power Shift)< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Left Hand Rail use Item #: 109570< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114450)
$356.00
Step Unit - John Deere 30-50 Series Open Station Series Step -
  • For John Deere tractor models 2840 (Open station), 2950 (Open station), 2955 (Open station), 3030 (Open station), 3040 (Open station), 3130 (Open station), 3140 (Open station), 3150 (Open station), 4030 (Open station), 4040 (Open station), 4050 (Open station), 4230 (Open station), 4240 (Open station), 4250 (Open station), 4430 (Open station), 4440 (Open station), 4450 (Open station), 4630 (Open station), 4640 (Open station), 4650 (Open station), 4840 (Open station), 4850 (Open station)< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Made in the USA< li>
  • Left Hand Rail use Item #: 109570< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114452)
$314.00
Step Unit - Late Hiniker Cab -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all with Hiniker cab late cab only where original steps mount with 4 bolts directly under the door)< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Left Hand Rail use Item #: 109570< li> < UL> (Part No: 114448)
$395.00
Step Unit - Left Hand -
  • For John Deere tractor models 2420 (Open station row crop & will require adapter bracket), 2510 (Open station row crop & will require adapter bracket), 2520 (Open station row crop & will require adapter bracket), 2950, 3010 (Open station row crop & will require adapter bracket), 3020 (Open station row crop & will require adapter bracket), 3030, 3040, 3130, 3140, 3150, 3155, 4000 (Open station row crop & will require adapter bracket), 4010 (Open station row crop & will require adapter bracket), 4020 (Open station row crop & will require adapter bracket), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4260, 4320 (Open station row crop & will require adapter bracket), 4350, 4430, 4440, 4450, 4455, 4520 (Open station row crop & will require adapter bracket), 4555, 4560, 4620 (Open station row crop & will require adapter bracket), 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960 (all other with Sound Guard cab)< li>
  • Fits left hand side< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Handrail shown is sold separately < li>
  • Optional 4th Step use Item #: 110137< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 113386)
$213.00
Step Unit - Right Hand -
  • For John Deere tractor models 2420, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620 (all row crop with open station)< li>
  • Fits right hand side< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Optional 4th Step use Item #: 110137< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 114447)
$268.40
Step with Bracket - Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104024)		$60.00
Swivel Step Unit -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955< li>
  • Will not fit open station tractors< li>
  • Convenient adjustable step unit makes it easier to get in and out of your tractor especially for tractors with front wheel assist or with loaders on them< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Step: 14-1 2" wide 6" deep mounts at 30° angle to tractor with 9" between steps< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • Left Hand Rail use Item #: 109570< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 109395)
$367.66
Toolbox - For model B from SN# 42200 to 59999. (Part No: 179853)		$57.00
Toolbox - For model H from SN# 27000 and up. (Part No: 180650)		$48.00
Toolbox - For tractor models: (AO, AR up to s n 271999), BO, BR. (Part No: 179511)$63.00
Toolbox - Fits AO, AR after SN# 281400, G, 60 Orchard, 60 Standard (up to SN# 6042999), 620 Orchard, 70 Row Crop, 720 Row Crop. Also replaces AA7265R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 150964)		$75.00
Toolbox - For A (S#584000-#655193). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 178632)		$48.50
Toolbox - For A (From S#655194). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AA4760R (Part No: 178631)		$48.50
Toolbox - For B (S#200100-#264778). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AB3538R (Part No: 180637)$48.50
Toolbox - For B (From S#264779). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180636)$48.50
Toolbox - With Bracket For 720 (From S#722600), 730Diesel with Electric Start. OEM# R20216R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179821)$82.00
Toolbox - For 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180595)$115.00
Tool Box - This Tool Box is used on John Deere 50, 520, 530. Replaces: AB4518R (Part No: 180323)		$62.00
Toolbox Cover with Hinge - Grated top. For tractor models 60, 70, 620, 630, 720, 730. (standard models). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AF1837R, AF3216R (Part No: 180450)		$106.00
Toolbox Cover with Hinge - Smooth top. For tractor models 60, 70, 620, 630, 720, 730. (standard models). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AF3216R, AF1837R (Part No: 180244)		$97.00
Toolbox for 60,620,630 - Fits 60 Regular, 60 Standard (SN# 6042999 and up), 620, 630. Replaces AA522R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 179438)		$73.00
Toolbox for H - Fits H (up to SN# 26999). Replaces H511R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180556)$47.76
Toolbox Side - Fender Mount. For tractor models 60, 620, 630, 70, 720, 730 Standard. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 180395)		$71.00
Tractor Mirror Assembly w/Arm and Mounting Bracket, 9" x 16" Mirror - Right Hand -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4630, 4640, 4650, 4720, 4755, 4760, 4840, 4850, 4955, 4960, 5085M, 5095M, 5101, 5105, 5200, 5210, 5225, 5300, 5310, 5320, 5325, 5400, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5603, 5625, 6030, 6100, 6110, 6115D, 6140D, 6200, 6210, 6215, 6230, 6300, 6310, 6320, 6330, 6400, 6405, 6415, 6420, 6430, 6615, 6715, 7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7420, 7430, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8345R, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8530, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9330, 9400, 9420, 9430, 9520, 9530, 9620, 9630< li>
  • Replaces John Deere OEM number RE151162< li>
  • Fits Right Hand Side< li>
  • Kit includes: 1 right angle bracket with bolts, nuts and washers to mount mirror arm to the angle bracket and 5 8" bolts and spacer washers< li>
  • For LH Mirror w Arm and Mounting Bracket use Item #: 117468< li> < UL> (Part No: 160825)
$166.00
Tractor Mirror Assembly w/Extendable Arm - Left Hand 8" x 11" Mirror, JD 9000 4WD Series -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Compatible with John Deere Combine(s) 9500, 9600< li>
  • Fits Left Hand Side< li>
  • 8" x 11" wide-angle convex mirror head< li>
  • Mirror length from cab frame to mirror head is 22" - 36"< li>
  • Extendable with easy adjustments< li>
  • Collapsible mirror bracket helps reduce mirror and light breakage< li>
  • Collapsible both forward and backward< li>
  • Powder coat finish < li>
  • All hardware included < li>
  • Detailed installation instructions included < li>
  • For Replacement Mirror Head use Item #: 110630< li> < UL> (Part No: 151061)
$186.00
Tractor Mirror Assembly with Arm and Mounting Bracket - Left Hand -
  • For John Deere tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4630, 4640, 4650, 4720, 4755, 4760, 4840, 4850, 4955, 4960, 5085M, 5095M, 5101, 5105, 5200, 5210, 5225, 5300, 5310, 5320, 5325, 5400, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5603, 5625, 6030, 6100, 6110, 6115D, 6140D, 6200, 6210, 6215, 6230, 6300, 6310, 6320, 6330, 6400, 6405, 6415, 6420, 6430, 6615, 6715, 7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7420, 7430, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8345R, 8400, 8410, 8420, 8430, 8440, 8450, 8520, 8530, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9330, 9400, 9420, 9430, 9520, 9530, 9620, 9630 (All Sound with Guard Cabs)< li>
  • Replaces John Deere OEM number RE151161< li>
  • Fits Left Hand Side< li>
  • Kit includes: 1 right angle bracket with bolts, nuts and washers to mount mirror arm to the angle bracket and 5 8" bolts and spacer washers< li>
  • For RH Mirror w Arm and Mounting Bracket use Item #: 160825< li> < UL> (Part No: 117468)
$166.00
Tractor Mirror Assembly with Extendable Arm - Left Hand or Right Hand -
  • For John Deere tractor models 8010, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number AR112841< li>
  • Fits Left Hand or Right Hand Side< li>
  • Kit includes: 8" x 11" wide-angle convex mirror head< li>
  • Mirror length of 22" to 36"< li>
  • Easily adjustable and extendable 14"< li>
  • Powder coat finish< li>
  • All hardware included< li>
  • Detailed installation instructions included< li> < UL> (Part No: 113757)
$186.00
Tractor Mirror Assembly with Extendable Arm - Right Hand -
  • For John Deere tractor models 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number RE276347< li>
  • Fits Right Hand Side< li>
  • 8" x 11" wide-angle convex mirror head< li>
  • Extendable with easy adjustments< li>
  • Collapsible mirror bracket helps reduce mirror and light breakage< li>
  • Collapsible both forward and backward< li>
  • Mirror length from cab frame to mirror head is 22" - 36"< li>
  • For Replacement Mirror Head use Item #: 151061< li> < UL> (Part No: 110630)
$186.00
Tractor Mirror Assembly with Extendable Arm - Right Hand or Left Hand -
  • For John Deere tractor models 6110, 6120, 6200, 6210, 6215, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6410, 6415, 6420, 6430, 6500, 6510, 6615, 6715, 7130, 7200, 7210, 7220, 7230, 7320, 7330, 7400, 7410, 7420, 7430, 7500, 7510, 7520, 7630, 7700, 7720, 7730, 7800, 7810, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number AL78834< li>
  • Fits Left or Right Hand Side< li>
  • 8" x 11" wide-angle convex mirror head< li>
  • Mirror length from cab frame to mirror head is 22"-36"< li>
  • Easily adjustable and extendable 14"< li>
  • Collapsible mirror bracket helps reduce mirror and light breakage< li>
  • Collapsible both forward and backward< li>
  • Powder coat finish < li>
  • All hardware included < li>
  • Detailed installation instructions included < li>
  • For Replacement Mirror Head use Item #: 161118< li> < UL> (Part No: 110720)
$186.00
Tractor Mirror Assembly with Extendable Arms -
  • For John Deere tractor models 2140, 2350, 2355, 2550, 2750, 2755, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6030, 8430, 8440, 8450, 8630, 8640, 8650, 8850, 9100< li>
  • Replaces John Deere OEM number RE151162, RE151161< li>
  • Mirror kit designed specifically for the John Deere Sound Gard tractors< li>
  • Fits Left Hand and Right Hand Side< li>
  • Kit includes: (2) 9" x 16" mirrors, (2) two hole extension arms, (2) interface brackets, (2) roof cab mounting bolts< li>
  • Extends 21" to 31"< li>
  • Requires no drilling or cutting< li>
  • Hardware included< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 119925)
$325.00
Tractor Mirror Assembly with Retractable Arm, Right Hand or Left Hand -
  • For John Deere tractor models 1030, 1040, 1050, 1130, 1140, 1250, 1450, 1530, 1630, 1640, 1650, 1830, 1840, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850 (Fits tractors with Sound-Gard cabs only)< li>
  • Replaces John Deere OEM number AL78021, AL77484< li>
  • Fits Left Hand or Right Hand Side< li>
  • Kit includes 8" x 11" wide-angle convex mirror head < li>
  • Mirror length from cab frame to mirror head is 22"-36"< li>
  • Easily adjustable and extendable 14"< li>
  • Powder coat finish < li>
  • All hardware included < li>
  • Detailed installation instructions included < li> < UL> (Part No: 109591)
$186.00
Tractor Step - For tractor models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 103952)		$32.00
Weight Bracket -
  • For John Deere tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020 (s n 122999-earlier), 3040, 3140, 3150, 3155, 3340, 3540, 3640, 4020 (s n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 4960, 5020, 6030, 6100D, 6105D, 6110D, 6115D, 6125D, 6130D, 6140D, 6403, 6603, 7200, 7200R, 7210, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7400, 7410, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8450, 8560, 8650, 8760, 8850, 8960< li>
  • Replaces John Deere OEM number R117599, AR72132< li>
  • Weight: 128 lbs< li>
  • Width: 20"< li>
  • Bolt Hole Centers: 14" & 3"< li>
  • Holds 10 of item no. 119703< li>
  • Holds 14 of item no. 119704< li>
  • Holds 14 of item no. 119702< li>
  • 3 4"x 2" Bolts Required< li> < UL> (Part No: 119693)
$194.50
Weight Bracket -
  • For John Deere tractor models 1450, 1550, 1650, 1750, 1850, 1950, 2150, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2950, 2955, 3055, 3255, 5045E, 5055E, 5065M, 5070M, 5075E, 5075M, 5080M, 5083E, 5083EN, 5085E, 5085M, 5090M, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101EN, 5103, 5105, 5105M, 5105ML, 5115M, 5115ML, 5200, 5203, 5205, 5210, 5220, 5300, 5303, 5310, 5320, 5320N, 5400, 5403, 6110, 6110L, 6120, 6120L, 6200, 6210, 6210L, 6220, 6220L, 6300, 6310, 6310L, 6320, 6320L, 6400, 6405, 6410, 6410L, 6420, 6420L, 6500, 6505, 6520L, 6605, 7405< li>
  • Replaces John Deere OEM number AR92425< li>
  • Weight: 110 lbs< li>
  • Bolt Hole Centers: 10" & 3-1 4"< li>
  • Holds 8 of weight no. 119703< li>
  • Holds 10 of weight no. 119704< li>
  • Holds 10 of weight no. 119702< li> < UL> (Part No: 119695)
$150.92
Weight - Suitcase, Front -
  • For John Deere tractor models 2840, 2940, 3040, 3140, 3340, 3540, 3640, 4040, 4050, 4055, 4240, 4250, 4255, 4350, 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5045, 5045D, 5045E, 5055D, 5055E, 5065M, 5070M, 5075E, 5075M, 5080M, 5083E, 5083EN, 5085E, 5085M, 5090M, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101EN, 5105, 5105M, 5105ML, 5115M, 5115ML, 5200, 5205, 5210, 5220, 5225, 5300, 5310, 5320, 5320N, 5325, 5325N, 5400, 5410, 5420, 5420N, 5425, 5425N, 5500, 5510, 5520, 5520N, 5525, 5525N, 5603, 5625, 6100D, 6105D, 6105M, 6105R, 6110, 6110D, 6110L, 6115D, 6115M, 6115R, 6120, 6120L, 6125D, 6125M, 6125R, 6130D, 6130R, 6140D, 6140M, 6140R, 6150M, 6150R, 6170M, 6170R, 6190R, 6200, 6210, 6210L, 6210R, 6215, 6220, 6220L, 6230, 6300, 6310, 6310L, 6320, 6320L, 6330, 6400, 6403, 6405, 6410, 6410L, 6415, 6420, 6420L, 6430, 6500, 6520L, 6603, 6605, 6615, 6715, 7130, 7200, 7200R, 7210, 7210R, 7215R, 7220, 7230, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7320, 7330, 7400, 7405, 7410, 7420, 7430, 7520, 7530, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8120T, 8130, 8200, 8210, 8220, 8220T, 8225R, 8230, 8230T, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8300, 8310, 8310R, 8310RT, 8310T, 8320, 8320R, 8320RT, 8320T, 8330, 8330T, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8370RT, 8400, 8410, 8420, 8420T, 8430, 8430T, 8450, 8520, 8520T, 8530, 8560, 8650, 8760, 8850, 8960, 9100, 9120, 9200, 9220, 9230, 9300, 9320, 9320T, 9330, 9360R, 9370R, 9400, 9400T, 9410R, 9420, 9420R, 9420T, 9430, 9430T, 9460R, 9460RT, 9470R, 9470RT, 9510R, 9510RT, 9520, 9520R, 9520RT, 9520T, 9530, 9530T, 9560R, 9560RT, 9620, 9620T, 9630, 9630T< li>
  • Replaces John Deere OEM number R116262, R127764< li>
  • Weight: 100 lbs< li> < UL> (Part No: 119702)
$132.00
Weight - Suitcase, Front -
  • For John Deere tractor models 1020, 1450, 1520, 1530, 1550, 1650, 1750, 1850, 1950, 2020, 2030, 2040, 2150, 2155, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4055, 4230, 4240, 4255, 4320, 4430, 4455, 4520, 4620, 4630, 5020, 5045, 5045D, 5045E, 5055, 5055D, 5055E, 5065M, 5070M, 5075, 5075E, 5075M, 5080M, 5083, 5083E, 5083EN, 5085E, 5085M, 5090M, 5093, 5093E, 5093EN, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101, 5103, 5105, 5105M, 5105ML, 5115M, 5115ML, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400, 5400N, 5403, 5410, 5420, 5420N, 5425, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5625, 6030, 6105M, 6105R, 6115M, 6115R, 6125, 6125M, 6125R, 6130, 6130R, 6140M, 6140R, 6150M, 6150R, 6170M, 6170R, 6190R, 6210, 6210R< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950, 7200, 7300, 7400, 7500, 7700, 7800< li>
  • Compatible with John Deere Hay Cutting(s) 2360< li>
  • Replaces John Deere OEM number R51680< li>
  • Weight: 100 lbs< li>
  • Made For Most 5000 Series Utility Tractors< li>
  • Thickness: 2"< li> < UL> (Part No: 119703)
$129.00
Weight - Suitcase, Front -
  • For John Deere tractor models 3055, 3150, 3155, 3255, 4250, 4255, 4450, 4455, 5103, 5105, 5203, 5205, 5303, 5403, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6403, 6500, 6500L, 6603, 7200, 7400, 7405< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830< li>
  • Replaces John Deere OEM number R58823< li>
  • Weight: 97 lbs< li>
  • Thickness: 1-7 16"< li> < UL> (Part No: 119704)
$122.00
Weight - Suitcase, Front -
  • For John Deere tractor models 650, 655, 670, 750, 755, 770, 790, 850, 855, 870, 950, 955, 970, 990, 1023E, 1025R, 1026R, 1050, 1070, 1250, 2025R, 2032R, 2210, 2305, 2320, 2520, 2720, 3005, 3032E, 3033R, 3038E, 3039R, 3046R, 3120, 3203, 3320, 3420, 3520, 3720, 4005, 4010, 4044M, 4044R, 4052M, 4052R, 4066M, 4066R, 4100, 4100N (all compact tractors), 4105, 4110, 4115, 4120, 4200, 4210, 4300, 4310, 4320, 4400, 4410, 4500, 4510, 4520, 4600, 4610, 4620, 4700, 4710, 4720< li>
  • Replaces John Deere OEM number BM19780< li>
  • Color: Green< li>
  • Weights: 70 lbs< li>
  • Thickness: 2-1 2 "< li> < UL> (Part No: 128784)
$86.00
Wheel Weight, Rear -
  • For John Deere tractor models 5220, 5320, 5420, 5520, 6105M, 6105R, 6115M, 6115R, 6120, 6120L, 6125M, 6125R, 6140M, 6150M, 6170M, 6220, 6220L, 6230, 6320, 6320L, 6330, 6420, 6420L, 6430, 6520L< li>
  • Replaces John Deere OEM number R61524< li>
  • OD: 20 1 4 "< li>
  • ID: 11 1 2 "< li>
  • Thickness: 2 3 8 "< li>
  • Weight: 115 lbs each< li>
  • Hole Pattern: 3 @ 16 1 2 "< li> < UL> (Part No: 128846)
$181.00
Window Step and Handrail - Right Hand -
  • For John Deere tractor models 7820, 7920 (large frame tractors small frame already have a window step)< li>
  • Compatible with John Deere Combine(s) 7720< li>
  • Will not work on tractors with loaders< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114455)
$370.00
Window Step and Handrail - Right Hand -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Will not work on tractors with loaders< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114460)
$415.00
Window Step and Handrail - Right Hand -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520 (all 2004-later less ILS front axles)< li>
  • Will not work on tractors with loaders< li>
  • Will not work with ILS front axle< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114462)
$386.77
Window Step and Handrail - Right Hand -
  • For John Deere tractor models 8130, 8230, 8330 (all ILS front axles)< li>
  • Will not work on tractors with loaders< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Fits Right Hand Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114463)
$348.00
Window Step and Handrail - Tier 4 Series -
  • For John Deere tractor models 8235R, 8260R, 8285R< li>
  • Convenient Step & Handrail Combination Makes It Easier To Clean Your Windshield< li>
  • Easy To Install With No Holes To Drill< li>
  • Matches Original Equipment Color & Hardware Is Included< li>
  • All Hardware Included< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 123319)
$617.66
Window Step & Handrail -
  • For John Deere tractor models 7630, 7730, 7830, 7930< li>
  • Will not work on tractors with loaders< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Right Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114456)
$382.36
Window Step & Handrail -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7810< li>
  • Compatible with John Deere Harvester(s) 7800< li>
  • Will not work on tractors with loaders< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Right Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114458)
$350.00
Window Step & Handrail -
  • For John Deere tractor models 8225R, 8245R, 8270R, 8295R (all less ILS front axles)< li>
  • Will not work on tractors with loaders< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Right Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114459)
$400.01
Window Step & Handrail -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520 (all 2003-earlier less ILS front axles)< li>
  • Will not work on tractors with loaders< li>
  • WIll not work with ILS front axles.< li>
  • Easy to install with no holes to drill and hardware is included< li>
  • Includes: handrail< li>
  • Right Side< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 114461)
$400.01
Wing Fastener -
  • For John Deere tractor models M, MC, MT, 40, 70, 320, 330, 420, 430, 720, 730< li>
  • Replaces John Deere OEM number F2134R, M1896T, M316T, M397T< li>
  • With Pin< li>
  • Pin dimensions: .309" diameter, .713" long < li> < UL> (Part No: 111045)
$24.26
 
Steering
Axle Bushing - This Axle Lubrication Fitting Bushing is used on John Deere 5045D, 5050E, 5055D, 5055E, 5060E, 5065E, 5065M, 5075E, 5075M, 5076E, 5076EL, 5078E, 5080M, 5082E, 5083E, 5085E, 5085M, 5090E, 5090EH, 5090EL, 5090M, 5095M, 5095MH, 5100M, 5100ML, 5103, 5105, 5105M, 5105ML, 5115ML, 5203, 5205, 5210, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5615, 5625, 5715, 5725 Replaces Carraro part number 146109, John Deere part number R217606 (Part No: 154486)		$25.50
Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 124660)		$270.00
Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Part No: 124661)		$270.00
Axle Center Tube - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Replaces original part number AR50865 $100 will be added for shipping due to size weight of part. This additional shipping charge will be added to your order. (Part No: 108906)		$1200.00
Axle, Front Housing Clamp -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320< li>
  • Replaces John Deere OEM number AR30154< li>
  • Replaces John Deere Casting number R27809< li>
  • Front Axle Housing and Pivot Bracket Clamp< li> < UL> (Part No: 119444)
$95.00
Axle Housing Seal, Left Hand -
  • For John Deere tractor models 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430, 8520< li>
  • Replaces John Deere OEM number RE49315< li> < UL> (Part No: 182976)
$17.20
Axle Housing Support -
  • For John Deere tractor models 5103 (5105), 5105, 5203, 5205, 5225, 5303, 5310, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE217600< li>
  • Replaces Carraro manufacturer number 149965< li>
  • 2 Wheel Drive with Fixed Steering Cylinder< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154539)
$2150.00
Axle Housing Support, Front -
  • For John Deere tractor models 5220, 5320, 5420, 5520< li>
  • Replaces John Deere OEM number R197978< li>
  • Replaces Carraro manufacturer number 141528< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154536)
$224.00
Axle Housing Support, Front -
  • For John Deere tractor models 5310N, 5320N, 5325N, 5400N, 5420N, 5425N, 5500N, 5510N, 5520N, 5525N< li>
  • Replaces John Deere OEM number RE195593, RE62805< li>
  • Replaces Carraro manufacturer number 129926< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154541)
$1675.00
Axle Knee Extension, Left Side - Fits John Deere Models: 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (all with Regular Adjustable Front Axle 52 inches to 72 inches. Replaces AR80193, AR59194, Casting numbers R64388, R49608 (Part No: 173486)		$600.70
Axle Knee Extension, Right Side - Fits John Deere Models: 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (all with Regular Adjustable Front Axle 52 inches to 72 inches. Replaces R80192, AR59194, AR59214, Casting numbers R64387, R49607, R53221 (Part No: 173494)		$638.80
Axle Knee, Left Hand -
  • For John Deere tractor models 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5320, 5400, 5403, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number RE58493< li>
  • Replaces Carraro manufacturer number 126650< li>
  • Fits left hand side< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • For Axle Knee, Right Hand use Item #: 154564< li> < UL> (Part No: 154563)
$1475.00
Axle Knee, Left Hand -
  • For John Deere tractor models 5310N, 5320N, 5325N, 5415, 5420N, 5425N, 5510N, 5520N, 5525N< li>
  • Replaces John Deere OEM number RE61847< li>
  • Replaces Carraro manufacturer number 122922< li>
  • Left Hand< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • For Axle Knee, Right Hand use Item #: 154566< li> < UL> (Part No: 154565)
$380.00
Axle Knee, Right Hand -
  • For John Deere tractor models 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5320, 5400, 5403, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number RE58492< li>
  • Replaces Carraro manufacturer number 126652< li>
  • Fits Right hand side< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154564)
$1475.00
Axle Knee, Right Hand -
  • For John Deere tractor models 5310N, 5320N, 5325N, 5415, 5420N, 5425N, 5510N, 5520N, 5525N< li>
  • Replaces John Deere OEM number RE61846< li>
  • Replaces Carraro manufacturer number 122923< li>
  • Right Hand< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • For Axle Knee, Left Hand use Item #: 154565< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154566)
$380.00
Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Part No: 124723)		$202.97
Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. John Deere models 940, 1040, 1140, 1550, 1750, 1850, 2040, 2040S, 2140, 2150, 2240 (Part No: 115716)		$145.00
Axle Shaft Bearing -
  • For John Deere tractor models M (s n 44475 - later), MC (s n 13907 - later), MT (s n 27913 - later), 40, 320, 330, 420, 430, 435, 440, 1010, 1020, 2010, 2030 (s n 187300 - earlier)< li>
  • Compatible with John Deere Combine(s) 45 (s n 3500 - earlier)< li>
  • Compatible with John Deere Harvester(s) 9900, 9910< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 310 (s n 192065 - earlier), 350, 350B, 380 (s n 192065 - earlier), 400, 401, 410 (s n 192065 - earlier), 440, 440 (s n 17057 - earlier), 440A, 440A (s n 17057 - earlier), 440B, 440B (s n 17057 - earlier), 450, 480, 480A (s n 193099 - earlier), 480B (s n 193099 - earlier), 540, 540A, 540B, 540D, 548D, 640, 640D, 648D< li>
  • Replaces John Deere OEM number JD8511, AL28037< li>
  • Replaces Bearing number 7109< li> < UL> (Part No: 173783)
$13.00
Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. John Deere 940, 1040, 1140, 1550, 1750, 1840, 1850, 2040, 2040, 2040S, 2140, 2150, 2240 (Part No: 160162)		$305.00
Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575 1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Part No: 156131)		$60.00
Axle Support, Front -
  • For John Deere tractor models 5076E, 5082E, 5083E, 5085E, 5090E, 5090EH, 5093E, 5100E, 5101E, 5225, 5325, 5415, 5415H, 5425, 5525, 5603, 5615, 5625, 5715, 5725 (s n 005048-later)< li>
  • Replaces John Deere OEM number R274621< li> < UL> (Part No: 166669)
$530.00
Back-Up Ring -
  • For John Deere tractor models 1640 (s n 429999-earlier, Europe), 1840 (s n 429999-earlier, Europe), 2040 (s n 429999-earlier, Europe), 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3040, 3055, 3140, 3150, 3155, 3255< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 7445, 7450, 7455, 9930, 9935, 9960, 9965, 9970, 9976< li>
  • Replaces John Deere OEM number L58009< li>
  • Back-up Ring for Hydrostatic Steering Unit< li> < UL> (Part No: 165395)
$32.26
Ball Joint - Length is 9.25 in, diameter is 0.781". For tractor models 1020, 1030, 1120, 1140, 1530, 1550, 1630, 1641, 1641F, 1750, 1850, 1850N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2255, 2355N (with SWEPT BACK AXLE), 920, 940, 1040. (Part No: 102245)		$22.26
Ball Joint - Length is 5.00", female end diameter is 1.125" I.D.. Fits 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1641F, 1750, 1950N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2250, 2251N, 2255, 2350, 2355, 2355N (with SWEPT BACK AXLE), 2450, 2550, 2555, 2755, 2855 (with SWEPT BACK AXLE), 820, 830, 840, 920, 930. Replaces: DE16303, 14M3290, AL39020, AL68629, AT27130 (Part No: 102248)		$30.00
Ball Joint - This Ball Joint measures LOA: 8 inches (203 mm), OD1: M22-1.5, OD2: M22-1.5. It is used on MFWD models: 5055E, 5065E, 5065M, 5075E, 5075M, 5076E, 5082E, 5083E, 5085E, 5085M, 5090E, 5090EH, 5093E, 5095M, 5100E, 5100M, 5100MH, 5101E, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5403, 5415, 5415H, 5425, 5603, 5605, 5615, 5625, 5705, 5715, 5725 (Part No: 180725)		$89.00
Ball Joint -
  • For John Deere tractor models 5045D, 5045E, 5055E, 5065E, 5065M, 5075E, 5075M, 5076E, 5076EL, 5082E, 5085M, 5090E, 5090EH, 5090EL, 5090M, 5093E, 5095M, 5095MH, 5100M, 5100ML, 5103, 5105, 5105M, 5105ML, 5115ML, 5203, 5205, 5225, 5303, 5325, 5403, 5420, 5425, 5520, 5525< li>
  • Replaces John Deere OEM number RE217819< li>
  • Replaces Carraro manufacturer number 45023< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154425)
$116.00
Ball Joint -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Compatible with John Deere Construction & industrial models 762B, 862B< li>
  • Replaces John Deere OEM number RE13035< li> < UL> (Part No: 170405)
$10.10
Ball Joint -
  • For John Deere tractor models 5045D, 5045E, 5055D, 5055E, 5065E, 5065M, 5075E, 5075M, 5076E, 5076EL, 5082E, 5085M, 5090E, 5090EH, 5090EL, 5090M, 5093E, 5095M, 5095MH, 5100M, 5100ML, 5103, 5105, 5105M, 5105ML, 5115ML, 5200, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5400, 5403, 5410, 5415, 5420, 5425, 5425H, 5425HC, 5500, 5520, 5525, 5615, 5625, 5625HC, 5715, 5725, 5725H, 5725HC< li>
  • Replaces John Deere OEM number RE217819< li>
  • For a premium version of this item use Item #: 154425< li> < UL> (Part No: 181303)
$75.00
Ball Joint, 11 Notch - A= 12.250", B= .781". For tractor models 1120, 1350, 1950N, 2150, 2255, 820, 830, 840, 920, 930, (1750, 2155, 2355N, 2855N, 1040 all with swept back axle), 1030. (Part No: 102249)		$26.30
Ball Joint, 13 Notch - Measure 14.509 inches from center of ball joint to the end of the shaft. The shaft is 0.781 inches in diameter. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2120, 2150, (2155 with straight axle), 2250, 2350, 2355, 2550, 2555, 2755. Replaces John Deere part numbers AL178098, AL39024 (Part No: 102246)		$25.00
Ball Joint - 2WD - Carraro -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303, 5325, 5403, 5420, 5425, 5520, 5525< li>
  • Replaces John Deere OEM number RE217817< li>
  • Replaces Carraro manufacturer number 45025< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154417)
$97.00
Ball Joint Assembly - Right Hand/Left Hand -
  • For John Deere tractor models 5103, 5200, 5210, 5220, 5300, 5303, 5310, 5320, 5400, 5403, 5410, 5415 (s n 005672-earlier), 5420 (s n 443959-earlier), 5500, 5510, 5520 (s n 453300-earlier), 5615 (s n 004136-earlier), 5715 (s n 008654-earlier)< li>
  • Replaces John Deere OEM number RE45997< li>
  • All with 2WD< li>
  • Length: 6.375"< li>
  • Longer Side: M18 x 1.5 RH Thread< li>
  • Shorter Side: M20 x 1.5 RH Thread< li> < UL> (Part No: 160198)
$60.00
Ball Joint - Left Hand -
  • For John Deere tractor models 7210, 7330, 7410, 7420, 7510, 7610, 7630, 7710, 7720, 7730, 7810, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number RE214056, RE161023< li>
  • Left Hand Side< li>
  • Length 9.625"< li>
  • 1.25- 12 UNF Left Hand Thread< li>
  • 1.00- 12 UNF Left Hand Thread< li> < UL> (Part No: 117562)
$121.00
Ball Joint - Right Hand -
  • For John Deere tractor models 7210, 7330, 7410, 7420, 7510, 7610, 7630, 7710, 7720, 7730, 7810, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number RE214055, RE150906< li>
  • Right Hand Side< li>
  • Length 9.625"< li>
  • 1.25- 12 UNF Right Hand Thread< li>
  • 1.00- 12 UNF Right Hand Thread< li> < UL> (Part No: 117558)
$95.00
Ball Joint, Steering -
  • For John Deere tractor models 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820< li>
  • Replaces John Deere OEM number AL178287, RE212813< li> < UL> (Part No: 170406)
$66.40
Bearing -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 7210, 7410, 7510, 7600, 7610, 7630, 7700, 7710, 7715, 7730, 7810< li>
  • Compatible with John Deere Combine(s) 7720< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Replaces John Deere OEM number JD10465< li>
  • Race Bearing< li> < UL> (Part No: 113641)
$11.95
Bearing Cone -
  • For John Deere tractor models 900, 7720, 7820, 7920< li>
  • Compatible with John Deere Combine(s) 6602, 6622, 9560, 9650, 9650 STS (South America), 9660, 9750, 9750 STS (South America), 9760, 9860, 9880 STS (Europe)< li>
  • Compatible with John Deere Header(s) 120, 130, 183, 200, 213, 215, 216, 218, 220, 222, 224, 230, 300, 890, 918, 920< li>
  • Compatible with John Deere Hay Cutting(s) 820, 1207, 1209, 1214, 1217, 1219, 1380, 1424, 1600< li>
  • Replaces John Deere OEM number JD9088< li>
  • Knife Drive Case Bearing Cone< li> < UL> (Part No: 112014)
$56.00
Bellcrank - For tractor models (2440 SN# up to 308804 with straight adj. front axle), (JD301, JD401, 1020, 1520, 1530, 2020, 2030, 2630 all with straight adj. front axle). 2640 Serial Number below 308804 wit straight adjustable front axle. Marked T21502 (Part No: 104916)		$260.00
Bellcrank - For tractor models (2440, 2640 serial number up to 308804 with 49 inch-79 inch swept back adj. axle), (2040, 2240 serial number up to 349999 with swept back adj. axle), (1530 with straight or swept back adj. axles), (JD301, JD401, 2630, 820, 830 with swept back adj. axle), (1020, 2020, with 44 inch-66 inch or 48 inch-78 inch swept back adj. axle), (1520 with 48 inch-78 inch swept back adj. axle), (JD300, JD400 without loader backhoe with swept back adj. axle). (Part No: 104915)		$330.20
Bellcrank - Casting #T21504. For tractor models (300, 301, 400, 401, 820, 830, 1020, 1520, 1530, 2020, 2630 all with swept back axle), (2030 SN# up to 187300 with swept back axle), (2040, 2240 SN# up to 349999 with swept back axle), (2440, 2640 SN# up to 308804 with swept back axle). (Part No: 104914)		$315.00
Bellcrank - This bellcrank is used on models 1040, 1140, 1350, 1550, 1750, 1850, 1950, 1950N, 2155, 840, 940, 2150. (Part No: 104919)		$168.20
Bellcrank - Includes AR92945 pin. For (1020, 2020 all with 60 inch-88 inch, 48 inch-80 inch or 58 inch-92 1 2 inch Straight Adj. front axle) 1520 with 48 inch-60 inch or 60 inch-88 inch Straight adj. front axle, 1530 with Extra Wide Front Axle, 2240 with 60 inch-88 inch or 58 inch-76 inch Straight adj. Front Axle, (2440, 2640 all serial number less than 308804 with 60 inch-88 inch or 58 inch-76 inch Straight adj. front axle), 2630 with 60 inch-88 inch Straight adj. front axle. Bellcrank marked R70764. (Part No: 104917)		$218.00
Bellcrank -
  • For John Deere tractor models 1640, 1840 (W Center Knuckle), 2040, 2250, 2350, 2355, 2555, 2755< li>
  • Replaces John Deere OEM number AL55151< li> < UL> (Part No: 104920)
$143.00
Bellcrank -
  • For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850< li>
  • Replaces John Deere OEM number AL55149< li> < UL> (Part No: 104921)
$175.00
Bellcrank -
  • For John Deere tractor models 2155, 2355N, 2755, 2855N< li>
  • Replaces John Deere OEM number AL58215< li> < UL> (Part No: 104922)
$136.50
Bellcrank -
  • For John Deere tractor models 2440 (s n 340999-earlier), 2440 (s n 341000-later), 2640 (s n 340999-earlier), 2640 (s n 341000-later)< li>
  • Compatible with John Deere Construction & industrial models 301A, 302, 401B< li>
  • Replaces John Deere OEM number AR91811< li>
  • Marked R70230< li> < UL> (Part No: 104924)
$289.70
Bellcrank -
  • For John Deere tractor models 2440 (s n 308805-later), 2640 (s n 308805-later)< li>
  • Replaces John Deere OEM number AR91812< li>
  • Replaces John Deere Casting number R70231< li>
  • All with straight adjustable axle; 53"-76", 53"-79", 60"-88", or 60"-93" < li> < UL> (Part No: 104925)
$305.00
Bellcrank -
  • For John Deere tractor models 2840 (with Adjustable Front Axle), 3030, 3120 (s n 063362-later), 3130< li>
  • Replaces John Deere OEM number AL19361< li>
  • Replaces John Deere Casting number L27088< li> < UL> (Part No: 104930)
$210.00
Bellcrank - For 1140, 1350, 1550, 1750, 1850, 1850N, 2155, 2255, 830, 840, 930. Bellcrank. (Part No: 104918)		$174.30
Bellcrank Pin - For 1130, 1630, 1830, 2030, 2130. Bellcrank Pin. (Part No: 152037)		$27.76
Bevel Gear and Pinion Flange -
  • For John Deere tractor models 5310N, 5320N, 5325N, 5400N, 5415, 5420N, 5425N, 5500N, 5510N, 5520N, 5525N< li>
  • Replaces John Deere OEM number R125564< li>
  • Replaces Carraro manufacturer number 123834< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154613)
$145.00
Bevel Gear and Pinion Kit -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73072< li>
  • Replaces Carraro manufacturer number 66105< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154545)
$1375.00
Bevel Gear and Pinion Kit -
  • For John Deere tractor models 5310N, 5320N, 5325N, 5400N, 5415, 5420N, 5425N, 5500N, 5510N, 5520N, 5525N< li>
  • Replaces John Deere OEM number RE61828< li>
  • Replaces Carraro manufacturer number 65967< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154547)
$925.00
Bevel Gear and Pinion Kit -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204873< li>
  • Replaces Carraro manufacturer number 68147< li>
  • Ring Gear< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154548)
$925.00
Bevel Gear and Pinion Kit -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number RE45931< li>
  • Replaces Carraro manufacturer number 66756< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154550)
$1025.00
Bevel Gear, Ring -
  • For John Deere tractor models 5425, 5525< li>
  • Replaces John Deere OEM number RE238996< li>
  • Replaces Carraro manufacturer number 68148< li>
  • Ring Gear< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154549)
$1175.00
Breakaway Coupler Overhaul Seal Kit -
  • For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3010 (W Dual Block Only), 3020, 3030, 3130, 4000, 4010 (W Dual Block Only), 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520 ('72-'75), 8430 ('75-'78), 8440, 8630, 8640< li>
  • Replaces John Deere OEM number RE206776< li> < UL> (Part No: 169773)
$19.50
Bushing -
  • For John Deere tractor model 900< li>
  • Compatible with John Deere Combine(s) 6602, 6622< li>
  • Compatible with John Deere Header(s) 78, 120, 130, 140, 160, 183, 200, 213, 215, 216, 218, 220, 222, 224, 230, 240, 300, 314, 316, 319, 890, 900F, 900R, 918, 920< li>
  • Compatible with John Deere Hay Cutting(s) 710, 720, 820, 1207, 1209, 1214, 1217, 1380, 1424, 1600, 1600A< li>
  • Replaces John Deere OEM number E57837< li> < UL> (Part No: 112012)
$8.40
Bushing -
  • For John Deere tractor models 1020, 1120, 1520, 2020, 2120, 8440, 8450, 8630, 8640, 8650< li>
  • Compatible with John Deere Harvester(s) 5730, 5830< li>
  • Replaces John Deere OEM number R39310< li> < UL> (Part No: 113895)
$8.30
Bushing -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850< li>
  • Replaces John Deere OEM number R82201< li>
  • ZF Front Axle< li> < UL> (Part No: 118337)
$16.47
Bushing -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8400< li>
  • Replaces John Deere OEM number R95118< li>
  • Inside Diameter: .988"< li>
  • Outside Diameter: 1.263"< li>
  • Length: .984"< li> < UL> (Part No: 124377)
$4.00
Bushing -
  • For John Deere tractor models 5045E, 5050E, 5055E, 5065E, 5080GV, 5080R, 5080RN, 5082E, 5090E, 5090EH, 5090G, 5090GV, 5090R, 5090RN, 5100GV, 5103, 5105, 5203, 5205, 5220, 5225, 5300, 5303, 5310, 5310N, 5320, 5325, 5400, 5400N, 5403, 5410, 5415, 5415H, 5420, 5425, 5500, 5500N, 5503, 5510, 5510N, 5520, 5525, 5603, 5615, 5625, 5715, 5715HC, 5725< li>
  • Replaces John Deere OEM number R204818< li> < UL> (Part No: 168576)
$8.06
Bushing -
  • For John Deere tractor models 5045E, 5050E, 5055E, 5065E, 5065M, 5070M, 5075E, 5075M, 5076E, 5076EL, 5080M, 5082E, 5083E, 5085E, 5085M, 5090E, 5090EH, 5090EL, 5090M, 5090R, 5093E, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5100ML, 5100R, 5103, 5105M, 5105ML, 5115M, 5115ML, 5115R, 5125R, 5203, 5225, 5303, 5310, 5325, 5403, 5415, 5415H, 5425, 5503, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5715HC, 5725< li>
  • Replaces John Deere OEM number R271391< li> < UL> (Part No: 168577)
$9.16
Bushing, Steering Cylinder -
  • For John Deere tractor models 7520, 8430 (74-81), 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Compatible with John Deere Construction & industrial models 340D, 440D, 444, 444C, 444CH, 444D, 448D, 540, 540A, 540B, 540D, 544, 544A, 544B, 544C, 544D, 548D, 640, 640D, 648D< li>
  • Replaces John Deere OEM number AT61453, AT54529, AT25833< li> < UL> (Part No: 170527)
$35.76
Bushing, Steering Cylinder -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600, 700A, 760, 760A< li>
  • Replaces John Deere OEM number AR30016< li> < UL> (Part No: 170539)
$17.50
Center Pivot Housing with Bushing - For tractor models 50, 520, 530, 60, 620, 630, 70, 720, 730 all with square tube axle only. Center Pivot Housing with Bushing. Add $35.00 additional shipping cost for this item due to weight. This additional charge will be added to your order. (Part No: 112102)		$472.50
Center Steering Arm - The Center Steering Arm (Bellcrank) is used on John Deere models: 300, 380, 400, 480, 480A, 480B, 1520. (Part No: 104929)		$305.00
Center Steering Arm - This Center Steering Arm is used on the following non-adjustable front axles: 300B, 302, 302A, 310B, 401B, 401C, 2640 serial number 341000 and up, 301A. Replaces AT52867, AT32476 (Part No: 104928)		$330.00
Center Steering Arm - Replacing Bellcranks marked R71082, this center steering arm is used on John Deere models 2440 and 2640, both adjustable straight front axles and both below serial number 340999. (Part No: 104926)		$289.60
Center Steering Arm - Used on John Deere models with adjustable swept back axles: 302 below 341648, 401B below serial number 341648, 2440 below serial number 340999, 2640 below serial number 340999, 301A below serial number 341648. This Center Steering Arm (Bellcrank) replaces those marked R71081 (Part No: 104927)		$267.80
Center Steering Arm - For tractor models 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Center Steering Arm replaces R50769. (Part No: 104965)		$150.20
Center Steering Arm Pin - Please check dimensions before ordering. Pin is 5.690" long X 1.499" diameter. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Center Steering Arm Pin. Used with Center Steering Arms: AR91812, AR92945, AR91811 and AR92944. (Part No: 173277)$41.26
Center Steering Arm Pin -
  • For John Deere tractor models 2840, 3030, 3120 (s n 063362-later), 3130< li>
  • Replaces John Deere OEM number 19361S< li>
  • Length: 6.640"< li>
  • Diameter: 1.499"< li> < UL> (Part No: 173706)
$47.00
Center Steering Arm Pin Bushing - Used on John Deere models 1020, 1030, 1120, 1130, 1630, 1830, 2020, 2030, 2120, 2130. This bearing has an inside diameter of 1.249 inches, outside diameter of 1.500 inches and is 1.500 inches long. (Part No: 179621)		$25.50
Center Steering Arm Pin Bushing - Measuring 1.500 inches inside diameter, 1.875 inches outside diameter and 1.000 inches wide, this bearing is used on John Deere models: 820, 1020, 1520, 2020, 3120, 830, 1530, 2630, 3030, 3130, 2040, 2240, 2444, 2640, 2840, 2150, 2155, 301, 302, 401, 401B (Part No: JD8827)		$21.76
Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Part No: 179918)		$12.61
Complete Wide Axle Assembly - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 450 lbs. (Part No: 108907)		$2750.00
Complete Wide Axle Assembly, Heavy Duty - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly - HEAVY DUTY. Includes all framing, tie rod and spindles. Additional Shipping Applies. CALL FOR SHIPPING QUOTE. Truck delivery, 465 lbs. (Part No: 110954)		$2861.30
Cross and Bearing Assembly -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920< li>
  • Replaces John Deere OEM number RE52347< li>
  • Diameter: 4.780"< li>
  • Length: .690"< li>
  • Hole Space: 1.690"< li>
  • Hole Spread: 3.500"< li>
  • Size: .560"< li>
  • Series: 5C< li>
  • Hole Size: .430"< li> < UL> (Part No: 165038)
$91.00
Cross and Bearing Assembly -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number RE40112< li> < UL> (Part No: 168861)
$136.70
Cross and Bearing Kit -
  • For John Deere tractor models 5076EF, 5076EN, 5083EN, 5090EN, 5101EN, 5105 (s n 411494-earlier), 5200, 5205 (s n 421397-earlier), 5210, 5220, 5300, 5310, 5310N, 5320, 5320N, 5325N, 5400, 5400N, 5410, 5415, 5415H, 5420, 5420N, 5425N, 5500, 5500N, 5510, 5510N, 5520, 5520N, 5525N, 5600, 5615, 5700, 5715, 5715HC< li>
  • Replaces John Deere OEM number RE45940< li> < UL> (Part No: 168060)
$80.00
Dana / Spicer® Tie Rod Assembly -
  • For John Deere tractor models 3120, 3203, 3320, 3520, 3720, 4105, 4200, 4210, 4300 (axle marked S20BZ107-1), 4400 (axle marked S20BZ107-1), 4410< li>
  • Replaces John Deere OEM number LVA14950, LVA10668< li>
  • Manufactured by Dana Spicer to exact OEM specifications< li>
  • Length: 33.622"< li>
  • 5 8" - 18 UNF< li> < UL> (Part No: 167345)
$280.00
Differential Carrier -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number RE271388< li> < UL> (Part No: 156233)
$560.00
Differential Cover -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number R271387< li> < UL> (Part No: 156232)
$109.00
Differential Disc Kit -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number RE271382< li> < UL> (Part No: 156230)
$46.00
Differential Drive Shaft Gear -
  • For John Deere tractor models 8100 (s n 077515-earlier), 8110, 8200 (s n 077515-earlier), 8210, 8300 (s n 077515-earlier), 8310, 8400 (s n 077515-earlier), 8410< li>
  • Replaces John Deere OEM number R130894< li>
  • Teeth: 44< li>
  • Splines: 34 (Internal)< li>
  • Inside Diameter: 1 5 8"< li>
  • Outside Diameter: 7 1 2"< li> < UL> (Part No: 160760)
$395.00
Differential Gear - Carraro -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5325, 5400, 5410, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE195924< li>
  • Replaces Carraro manufacturer number 66282< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154557)
$345.00
Differential Gear Kit - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204874< li>
  • Replaces Carraro manufacturer number 68070< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154555)
$580.00
Differential Housing -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number R271381< li> < UL> (Part No: 156229)
$184.00
Differential Housing Kit - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE215037, R204855, R204830< li>
  • Replaces Carraro manufacturer number 68146< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154601)
$300.00
Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Part No: 112468)		$45.00
Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Part No: 112468)		$45.00
Differential Shaft - Carraro -
  • For John Deere tractor models 5425, 5525< li>
  • Replaces John Deere OEM number R238998< li>
  • Replaces Carraro manufacturer number 149479< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154724)
$47.26
Differential Spider Gear Kit -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number RE271384< li> < UL> (Part No: 156231)
$305.00
Differential Support - Carraro -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE61820< li>
  • Replaces Carraro manufacturer number 132254< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154560)
$780.00
Draft Link Pivot Pin -
  • For John Deere tractor models 520, 530, 620, 630< li>
  • Replaces John Deere OEM number A5715R< li>
  • Yellow zinc. 2 used per tractor< li>
  • Sold individually< li> < UL> (Part No: 126330)
$38.50
Draft Link Pivot Pin -
  • For John Deere tractor models 720, 730, 3010, 3020 (s n 81039-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500 (s n 81039-earlier)< li>
  • Replaces John Deere OEM number R40516, F2781R< li> < UL> (Part No: 126331)
$17.90
Drag Link - Right hand threaded end, A= 3.12, B= .687. For tractor models M, 40, 320, 330, 420, 430, 435, 1010 (Also subs for AM498T). (Part No: 104785)		$20.10
Drag Link Assembly - A= 40.750", B= 1.062", ball joint ends are rotated 90 degrees. For tractor models JD401, 2020, 2030, 2440, 2630, (2640 SN# up to 340999). Replaces AL19047, AL38636, AL39035, AT33297 (Part No: 102275)		$59.00
Drag Link Assembly - This Drag Link Assembly is used on John Deere 2840, 3120, 3130. It replaces original part number AL39026, AT26382, AL38641 (Part No: 179601)		$123.00
Drag Link Assembly - This Drag Link Assembly is used on 1640, 1840, 2040, 2040S, 2140, 2350, 2550, 2650, 2650N, 2850, 2355, 2555, 2755, 2855N. Replaces OEM Part Numbers AL38638, AL82836 $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 165952)		$110.00
Drag Link Assembly - For 1040, 1140, 1350, 1550, 1750, 1850, 840, 940. Complete Drag Link Assembly. (Part No: 104800)		$137.00
Drag Link Assembly - For 1140, 1350, 1550, 1750, 1850, 840, 940. Drag Link Assembly, 35.75" long, 1.1" wide. (Part No: 104800)		$137.00
Drag Link Assembly - 35.781 Long For 820, 830, 1020, 1520, 1530, 2040, 2240 (To S#349999). $5 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102274)		$87.00
Drag Link Rod - Threaded on one end, 7 8 inch inside diameter, right hand threads. For 60, 70, 620, 630, 720, 730 with Adjustable Round Front Axle. Replaces OEM B2696R. (Part No: 179760)		$46.00
Drang Link Shaft Cover Gasket -
  • For John Deere tractor models 830 (3 Cyl.), 840, 930, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 2030, 2040 (s n 266750-later), 2130, 2150, 2155, 2240, 2255, 2355N, 3030, 3130< li>
  • Replaces John Deere OEM number L62423, L35654, T21527< li> < UL> (Part No: 161827)
$3.46
Drive Motor Sprocket -
  • For John Deere Construction & industrial models 27C, 27 ZTS< li>
  • Replaces John Deere OEM number 2043505< li>
  • Teeth: 20< li> < UL> (Part No: 185698)
$190.00
Drive Motor Sprocket -
  • For John Deere Construction & industrial model 35D< li>
  • Replaces John Deere OEM number 1032265< li> < UL> (Part No: 185699)
$200.00
Drive Shaft -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455< li>
  • Replaces John Deere OEM number RE36872< li> < UL> (Part No: 120099)
$1225.00
Drive Shaft - Carraro -
  • For John Deere tractor models 5225, 5303, 5310, 5325, 5403, 5425, 5525, 5610, 5625< li>
  • Replaces John Deere OEM number RE248603< li>
  • Replaces Carraro manufacturer number 146563< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154700)
$975.00
Driveshaft Coupler -
  • For John Deere tractor models 650, 750, 850 (SN: 16001 and Later), 950 (SN: 20001 and Later), 1050 (SN: 11001 and Later)< li>
  • Replaces John Deere OEM number CH14613< li> < UL> (Part No: 186515)
$87.68
Drive Shaft Pinion -
  • For John Deere Construction & industrial models 450B, 450C, 450D, 450E, 455D, 455E< li>
  • Replaces John Deere OEM number T31999< li>
  • Teeth: 12< li>
  • Splines: 23< li> < UL> (Part No: 126907)
$315.00
Drive Shaft Yoke Kit -
  • For John Deere tractor model 5076EF (Narrow)< li>
  • Replaces John Deere OEM number SJ16519< li>
  • Replaces Carraro manufacturer number 64251< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154679)
$375.00
E1NN1N050AA - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. Used on ZF Mechanical Four Wheel Drive axles. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Part No: 156198)		$6.06
Final Drive Pinion Shaft -
  • For John Deere tractor models 7210, 7410, 7420, 7510, 7610 (s n 089999-earlier), 7710, 7720, 7810, 7820, 7920, 8100 (s n 800001-later), 8110, 8120, 8200 (s n 800001-later), 8210, 8220, 8300, 8310, 8320, 8400 (s n 800001-later), 8410, 8420, 8520< li>
  • Replaces John Deere OEM number R130078, R104755< li> < UL> (Part No: 150821)
$140.00
Final Drive Ring Gear -
  • For John Deere tractor models 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Replaces John Deere OEM number R156869< li> < UL> (Part No: 150824)
$301.00
Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Part No: 124721)		$99.00
Front Axle Assembly, Wide, Heavy Duty - This front axle assembly fits models 3010, 3020, 4000, 4020. Includes 6 bolt hubs with 6" bolt circle and 4.62" pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60" to 86". Additional $120 added to shipping due to the weight. This additional charge will be added to your order. (Part No: 120002)$3858.80
Front Axle Assembly, Wide, Heavy Duty, without hubs - For JD 3010, 3020, 4000, 4010, 4020. Schwartz Complete Axles and mounting Parts WITHOUT HUBS. These Heavy Duty Models do not include hubs and bearings. Use original hubs and bearings from narrow front axle. The Heavy Duty Models are especially adaptable for use with flotation tires. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 300 lbs. This additional charge will be added to your order. (Part No: 120004)$3379.79
Front Axle Bearing Housing with Bearing - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R204917< li>
  • Replaces Carraro manufacturer number 148881< li>
  • I. S. C. Differential Support< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154569)
$975.00
Front Axle Bushing -
  • For John Deere tractor models 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2750, 2755, 2850, 2855< li>
  • Replaces John Deere OEM number T21553< li> < UL> (Part No: 121434)
$8.50
Front Axle - Carraro -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE62987< li>
  • Replaces Carraro manufacturer number 129940< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154540)
$1100.00
Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Part No: 111973)		$12.00
Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Part No: 113981)		$9.26
Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565 1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Part No: 156132)		$89.00
Front Axle Differential Kit - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73076< li>
  • Replaces Carraro manufacturer number 66353< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154561)
$460.00
Front Axle Housing - Carraro -
  • For John Deere tractor models 5415, 5615, 5715< li>
  • Replaces John Deere OEM number R189705< li>
  • Replaces Carraro manufacturer number 144525< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154688)
$1425.00
Front Axle Housing - Carraro -
  • For John Deere tractor models 5225, 5303 (s n 000400 - 000781), 5310 (s n 025451-earlier), 5325, 5403 (s n 000439 - 001898), 5425, 5525, 5610, 5625< li>
  • Replaces John Deere OEM number R248598< li>
  • Replaces Carraro manufacturer number 146561< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154727)
$2425.00
Front Axle Housing Lock Bolt -
  • For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320< li>
  • Compatible with John Deere Harvester(s) 9900< li>
  • Replaces John Deere OEM number B2694R< li>
  • Uses 1" NC Nut< li> < UL> (Part No: 108966)
$22.80
Front Axle Housing Support - Carraro -
  • For John Deere tractor models 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R204854< li>
  • Replaces Carraro manufacturer number 148738< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154607)
$157.00
Front Axle Knee - Carraro -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303, 5310, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE217602< li>
  • Replaces Carraro manufacturer number 146104< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154574)
$490.00
Front Axle Knee - Carraro -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303, 5310, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE217603< li>
  • Replaces Carraro manufacturer number 146105< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154583)
$445.00
Front Axle Knee, Carraro - Right Hand -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73018< li>
  • Replaces Carraro manufacturer number 140534< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154588)
$1025.00
Front Axle Mounting Plate Wedge -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020< li>
  • Compatible with John Deere Harvester(s) 9900< li>
  • Replaces John Deere OEM number R49098< li> < UL> (Part No: 109528)
$17.50
Front Axle Pin - This Pin Measures 1.575 inches outside diameter and is 3.735 inches long. Replaces John Deere part numbers L55437, AL55410, 47M7003, L34070 (Part No: 161647)		$26.26
Front Axle Pin -
  • For John Deere tractor models 5103, 5200, 5203, 5210, 5220, 5300, 5303 (European), 5310, 5320, 5400, 5403 (European), 5410, 5420, 5500, 5510, 5520, 5615 (Turkish), 5715 (Turkish)< li>
  • Replaces John Deere OEM number R113759< li>
  • Replaces Carraro manufacturer number 126747< li> < UL> (Part No: 154692)
$100.00
Front Axle Pin - Carraro -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303, 5310, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R217618< li>
  • Replaces Carraro manufacturer number 148233< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154578)
$750.00
Front Axle Pin Rear Bushing - The measurements on this bushing are: 1.690 inches outside diameter, 1.500 inches inside diameter, and 2.000 inch long. It is used on John Deere 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Replaces R65827 (Part No: 109837)		$11.00
Front Axle Pivot Pin - Used on John Deere 1630, 2840, 2940, 2950, 2955, 4030, 4040, 4050, 4055, 4230, 4430, this pin measures A - 4.250 inches long, 1.500 inches in diameter. Replaces B2700R, T29205. (Part No: 108531)		$19.00
Front Axle Pivot Pin -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Compatible with John Deere Harvester(s) 9960, 9965, 9970< li>
  • Replaces John Deere OEM number R79996< li>
  • 4.29" Long< li>
  • 2.00" Diameter< li> < UL> (Part No: 109567)
$42.50
Front Axle Screw -
  • For John Deere tractor models 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5310, 5320, 5400, 5403, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number R114018< li>
  • Replaces Carraro manufacturer number 126697< li> < UL> (Part No: 154671)
$37.76
Front Axle Shaft Assembly - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73077< li>
  • Replaces Carraro manufacturer number 130463< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154676)
$840.00
Front Axle Support -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5725< li>
  • Replaces John Deere OEM number R271464< li> < UL> (Part No: 156239)
$250.00
Front Axle Support Bushing - Used on John Deere 1350, 1550, 1850, 1850F, 1950, 1950F, 1950N, 2040S, 2140, 2155, 2250, 2250F, 2355, 2450, 2450F, 2555, 2650, 2650F, 2750, 2755, 2850, 2855N this bushing measures 1.252 inches inside diameter, 1.422 inches outside diameter, and 1.571 inches long. (Part No: 168061)		$9.40
Front Axle Support - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73020< li>
  • Replaces Carraro manufacturer number 140532< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154538)
$1100.00
Front Axle Support - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R215150< li>
  • Replaces Carraro manufacturer number 148884< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154581)
$430.00
Front Axle Support - Carraro -
  • For John Deere tractor models 5220, 5303, 5320, 5403, 5420, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number R204869< li>
  • Replaces Carraro manufacturer number 148883< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154582)
$300.00
Front Axle Support - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R215151< li>
  • Replaces Carraro manufacturer number 148885< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154608)
$275.00
Front Axle Support, Rear - For model 2010. (Part No: 173086)		$241.20
Front Axle Swivel Housing, Carraro - Left Hand -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R140147< li>
  • Replaces Carraro manufacturer number 127259< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154577)
$610.00
Front Axle Swivel Housing, Carraro - Left Hand -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204838< li>
  • Replaces Carraro manufacturer number 146079< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154592)
$975.00
Front Axle Swivel Housing, Carraro - Right Hand -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R140138< li>
  • Replaces Carraro manufacturer number 127260< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154585)
$660.00
Front Axle Swivel Housing, Carraro - Right Hand -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204832< li>
  • Replaces Carraro manufacturer number 146078< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154599)
$975.00
Front Axle Trunnion - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R140128< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154580)
$300.00
Front Axle Yoke with Shaft - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R212837< li>
  • Fork< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154567)
$315.00
Front Support Pivot Shaft - For MT, (40, 420, 430 all row crop). Front Support Pivot Shaft. (Part No: 172643)		$112.40
Front Wheel Assist Yoke Seal - This front wheel assist yoke seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 6165J, 7210, 7330PR, 7410, 7420, 7510, 7600, 7610, 7630, 7700, 7710, 7715, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930. Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484 (Part No: 106642)		$10.70
Gear, Planetary -
  • For John Deere tractor models 6605, 6615, 6715, 7210, 7220, 7320, 7410, 7510< li>
  • Compatible with John Deere Construction & industrial models 3200, 3215, 3220, 3400, 3415, 3420, 3800< li>
  • Replaces John Deere OEM number L114784< li> < UL> (Part No: 171466)
$154.00
Gear, Planetary -
  • For John Deere tractor models 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number R157059< li> < UL> (Part No: 171469)
$295.00
Gear, Planetary -
  • For John Deere tractor models 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8520, 8520T, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number R198700, R198701, R224672, R554198, R560122< li> < UL> (Part No: 171472)
$375.00
Gear, Planetary 35T - 35 tooth planetary gear for models: 6900 (APL2060; European), 6910 (APL2060; European SN# <225863), 6910S 6910S (APL2060; European SN# <225863), 7405 7405 (APL2060), 7500 7500 (APL2060). (Part No: 114382)		$239.00
Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855, 2855N (Part No: 124593)		$10.70
Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following John Deere models: 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2855N (Part No: 124592)		$20.70
Half Shaft Bushing - easuring 1.815 inches inside diameter, 1.971 inches outside diameter and 0.985 inches wide, this is the inner bushing on ZF APL335 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81287C2, 83956845, L60147, ZP0730260618. This front axle can be found on the following John Deere models: 2140 serial number 430000 and up, 2750, 2755, 2850, 2950, 2955, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255 (Part No: 158091)		$28.76
Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9 16-18 x 1.69 inch. (Part No: 104768)		$45.00
Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 & below), 3130 (SN# 186270 & above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 & above), 401B, 401C, 4020 (SN# 201000 & above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Part No: 102236)		$56.00
Hub, Front Wheel, 6 bolt - Fits the following tractors that use tire size 5.50-16 to 6.00-16 : 1020, 1520, 2020, 2030 (Part No: 104769)		$42.00
Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p n WBKJD3 wheel bearing kit and p n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755(Mid-Hi axle), 820, 830, 840. (Part No: 102233)		$76.00
Hub Seal - Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555. (Part No: 104717)		$37.40
Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Part No: 124718)		$57.70
Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Part No: 104716)		$16.26
Hydraulic Motor Piston -
  • For John Deere tractor model 5720< li>
  • Compatible with John Deere Combine(s) CTS, CTSII, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9650, 9650 CTS, 9650 STS< li>
  • Compatible with John Deere Harvester(s) 5730, 5830, 6610, 6650, 6710, 6750, 6810, 6850, 6910, 6950< li>
  • Replaces John Deere OEM number RE27837< li>
  • For Power Rear Wheel Drive Cam Lobe Motor< li> < UL> (Part No: 118716)
$345.00
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 410D, 410G, 510D< li>
  • Replaces John Deere OEM number RE30100< li>
  • Piston: 2-1 4"< li> < UL> (Part No: 153032)
$3.56
Hydraulic Steering Cylinder Cap -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R113761< li>
  • Replaces Carraro manufacturer number 49042< li> < UL> (Part No: 154435)
$193.00
Hydraulic Steering Cylinder - Carraro -
  • For John Deere tractor models 5075, 5083, 5093, 5101< li>
  • Replaces John Deere OEM number SJ16478< li>
  • Replaces Carraro manufacturer number 400884< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154705)
$750.00
Hydraulic Steering Cylinder, Remanufactured, RE49608 -
  • For John Deere tractor models 7600, 7700, 7800< li>
  • Replaces John Deere OEM number RE49608, RE158114< li> < UL> (Part No: 210514)
$465.01
Hydrostatic Steering Cylinder Kit -
  • For John Deere Construction & industrial models 310C, 510B, 515B< li>
  • Replaces John Deere OEM number AT78498, AT76043< li> < UL> (Part No: 159181)
$27.50
Idler Assembly -
  • For John Deere Construction & industrial model 17D< li>
  • Replaces John Deere OEM number 9312918< li> < UL> (Part No: 185705)
$336.77
Independent Link Suspension Cylinder Pin -
  • For John Deere tractor models 8120, 8130, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8320, 8320R, 8330, 8335R, 8345R, 8360R, 8370R, 8400R, 8420, 8430 (Model Year 2006-2009), 8520, 8530< li>
  • Replaces John Deere OEM number R175773, R537928< li> < UL> (Part No: 168063)
$77.00
Inner Tie Rod - For 520, 520, 620, 630, 720, 730. Inner Tie Rod. 16" long, 6 vertical holes. REPLACES: AF3206R (Part No: 104801)		$119.00
Jam Nut -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4840, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R78026< li>
  • LH Thread< li> < UL> (Part No: 104895)
$12.26
Joint Assembly -
  • For John Deere tractor models 6100D, 6105E, 6110D, 6120, 6120L, 6130, 6215, 6220, 6220L, 6230, 6320L, 6330, 6415, 6420L, 6430, 6520L< li>
  • Replaces John Deere OEM number AL174339< li> < UL> (Part No: 165513)
$550.00
Joint Assembly - Left Hand -
  • For John Deere tractor models 5082E, 5090E, 5090EH, 5103, 5105, 5203, 5205, 5220, 5225, 5320, 5325, 5403, 5415, 5420, 5425, 5520, 5525, 5603, 5615, 5625, 5715, 5715HC, 5725< li>
  • Replaces John Deere OEM number RE212836< li>
  • Fits Left Hand Side< li> < UL> (Part No: 165511)
$650.00
Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on John Deere models: 1640 axle serial number 048739 and up, 2040 axle serial number 048739 and up, 2040S axle serial number 048739 and up, 2350 axle serial number 048739 and up, 2355 serial number prior to 629298, 2550 axle serial number 048739 and up, 2555 serial number prior to 629299, 2650 serial number prior to 629299. (Part No: 156193)		$520.00
King Pin - John Deere models 2140 (serial number 430000 and later), 2650, 2650N, 2750, 2755, 2850, use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335 and APL 735. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Part No: 156196)		$111.00
King Pin, Carraro - Left Hand -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE61806< li>
  • Replaces Carraro manufacturer number 123292< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154475)
$650.00
King Pin, Carraro - Right Hand -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE61804< li>
  • Replaces Carraro manufacturer number 123291< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154478)
$570.00
King Pin, Lower - Marked R131810. For tractor models 7210, 7330 Premium, 7410, 7420, 7510, 7610, 7630, 7710, 7715, 7720, 7730, 7810, 7815, 7820, 7830, 7920, 7930. (Part No: 113639)		$108.00
King Pin, Upper - Marked R136036. For tractor models 7210, 7410, 7420, 7510, 7610, 7710, (7720 SN# up to 842916), 7810, 7815, (7820, 7920 up to SN# 842916). (Part No: 113638)		$115.00
Kingpin with Bearing -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8400< li>
  • Replaces John Deere OEM number RE63382, R106674, R126390< li> < UL> (Part No: 182981)
$91.00
Knee Assembly, Heavy Duty. - Knee Assembly, Heavy Duty. Includes spindle, Knee, inner bearing cone, and thrust washers. For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors (Part No: 123964)		$475.00
Knee Extension - Knee Extension. Used with Ar55180 spindle. Dimensions A-3.250 inch B-18.000 inch C-12.750 inch For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900 tractors (Part No: 109374)		$240.00
Knee, Heavy Duty - A= 3.250", B= 18.00", C= 12.750". For Used on heavy duty front axle AR44331H. Models: (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 all with heavy duty knee). (Part No: 110032)		$388.50
Knee, Utiliy Row Crop Lo-Pro -
  • For John Deere tractor models 3010, 3020, 4000, 4020, 4230< li>
  • Replaces John Deere OEM number AR69834< li> < UL> (Part No: 165667)
$185.00
Knuckle - Left -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5203, 5204, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number R271410< li> < UL> (Part No: 156217)
$750.00
Long Knee Extension - Long Knee Extension. For Extra Wide Rows. Dimensions A-3.250 inch B-24.000 C-12.750 inch For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. (Part No: 108910)		$309.20
Lower King Pin -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number R271408< li> < UL> (Part No: 156236)
$69.00
Needle Bearing -
  • For John Deere tractor models 40 (Standard Axle, s n: 69404-later), 320 (Standard Axles), 330 (Standard Axles), 420 (Standard Axles), 430 (Standard Axles), 1010 (Single Row Crop, s n: 010001-042000)< li>
  • Replaces John Deere OEM number JD8820< li> < UL> (Part No: 176562)
$23.17
Oil Seal - Used in Mechanical Four Wheel Drive front axles, this seal measures 75mm inside diameter, 95mm outside diameter and 10mm wide. Used on John Deere 940, 1040, 1140 up to serial number 621999, 1550, 1640, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3350, 533, 633, 733, 833, 485, 585, 685, 785, 885, 743, 644, 744, 844, 844S, 745, 745S, 856, 5600, 6600, 5700, 6700. Used on ZF APL1251, APL1351, APL1552 axles. (Part No: 186986)		$4.94
Orbital Steering Unit Seal Kit - Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Part No: 165413)$34.76
Outer Bushing, MFWD - Used on ZF Axles APL345, APL350, APL1351, APL1551, this bushing measures 1.813 inches inside diameter, 1.973 inches outside diameter and 1.182 inches wide. The bushing replaces OEM numbers 83956846, 87791108, L60088, 81306C1, ZP0730260619. Used on John Deere models: 2140, 2750, 2755, 2855N, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 5403, 5605, 5705, 6403, 6405, 6415, 6603, 6605, 210C, 300D, 310D, 315D (Part No: 156192)		$33.00
Outer Tie Rod - For tractor models 520, 620, 630, 720, 730. InnerOuter Tie Rod. 17.75" long, 7 vertical holes. REPLACES: AF3207R (Part No: 104802)		$137.00
Outer Tie Rod -
  • For John Deere tractor models 8120, 8130, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8310R, 8320, 8320R, 8330, 8335R, 8345R, 8360R, 8420, 8430, 8520, 8530< li>
  • Replaces John Deere OEM number RE216822, RE184942< li>
  • Independent Link Suspension< li>
  • Dimension A: 9"< li>
  • Dimension B: M16 x 2.0 Right Hand Thread< li>
  • Dimension C: M45 x 2.0 Right Hand Thread< li> < UL> (Part No: 169962)
$310.00
Packing - Washer, R39304 -
  • For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s n 430000-later), 1830, 2020, 2030, 2040 (s n 430000-later), 2040 (s n 350000-later), 2040S (s n 430000-later), 2120, 2130, 2140 (s n 430000-later), 2150, 2155, 2240 (s n 349999-earlier), 2255, 2350, 2355, 2355N, 2440 (s n 340999-earlier), 2550, 2555, 2630, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3030, 3040 (s n 430000-later), 3055, 3120, 3130, 3140 (s n 430000-later), 3150, 3155, 3255, 3640 (s n 341000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8630, 8640, 8850< li>
  • Compatible with John Deere Construction & industrial models 415B, 515B< li>
  • Replaces John Deere OEM number R39304< li> < UL> (Part No: 117267)
$5.76
Pinion - First and Second Planet -
  • For John Deere tractor models 4555, 4755, 4955< li>
  • Replaces John Deere OEM number R112072, R71580< li>
  • Teeth: 16, 26< li>
  • Brake Pack, Powershift, 1st & 2nd Planet< li> < UL> (Part No: 115253)
$110.00
Pinion Gear -
  • For John Deere tractor models 4040 (with 86mm gear), 4050 (with powershift s n 2724-earlier or quadrange s n 6643-earlier), 4230 (s n 15453-26188), 4240 (with 86mm gear), 4430 (with 86mm gear s n 21270-40770)< li>
  • Replaces John Deere OEM number R56732< li>
  • Teeth: 21< li>
  • Width: 1.515"< li>
  • Use with pinion shaft R67198, R56731, our no. 121461< li> < UL> (Part No: 121462)
$160.00
Pinion Gear -
  • For John Deere tractor models 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6405, 6410, 6410L, 6415, 6420, 6510< li>
  • Replaces John Deere OEM number L110237, 4475304138, 04424488< li>
  • Drive Shaft For ZF APL2025 Front Axles< li>
  • 39 Spline< li>
  • 3 Per Side< li> < UL> (Part No: 150995)
$95.00
Pinion Gear -
  • For John Deere tractor models 4520, 4620, 4630 (s n 12839-earlier), 7020, 7520 (rear axle only)< li>
  • Replaces John Deere OEM number R43014< li>
  • 20 Teeth< li>
  • 2.0" Wide< li> < UL> (Part No: 152207)
$215.00
Pinion Shaft - For tractor models (2140, 3040, 3140 SN# 430000 and up), 3640, 2750, 2950, 3150, (2955 up to SN# 765516), 3055, 3155, 3255. Replaces L40267. Used on APL345 or APL350 front axles. 18 and 22 teeth. (Part No: 114884)		$75.00
Pinion Shaft -
  • For John Deere tractor models 4840, 4850, 4955, 4960, 8640, 8650< li>
  • Replaces John Deere OEM number R112836, R61421, R74072< li>
  • Teeth: 14< li>
  • Splines: 22 < li>
  • Length: 12.00 < li> < UL> (Part No: 108533)
$165.00
Pinion Shaft -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number RE17692< li> < UL> (Part No: 108535)
$43.75
Pinion Shaft -
  • For John Deere tractor models 4040 (with 86mm gear), 4050 (with powershift s n 2724-earlier or quadrange s n 6643-earlier), 4230 (s n 15453-26188), 4240 (with 86mm gear), 4430 (with 86mm gear s n 21270-40770)< li>
  • Replaces John Deere OEM number R56731, R67198< li>
  • Teeth: 15< li>
  • Splines: 18< li>
  • Length: 9.380"< li>
  • Use with pinion gear R56732, our no. 121462< li> < UL> (Part No: 121461)
$214.00
Pinion Shaft -
  • For John Deere tractor models 4520, 4620, 4630 (s n 12839-earlier), 7020 (rear axle), 7520 (rear axle)< li>
  • Compatible with John Deere Construction & industrial models 444, 444C, 444D, 544, 644< li>
  • Replaces John Deere OEM number R43016, R113732< li>
  • Teeth: 13< li>
  • Splines: 22< li>
  • Length: 10.730"< li> < UL> (Part No: 126894)
$550.00
Pivot Bolster - Use R3064 Pin. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Additional $75 shipping due to weight. This additional charge will be added to your order. (Part No: 110737)		$500.00
Pivot Bushing, Rear -
  • For John Deere tractor models 2955, 3005, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number L63510, L62838< li>
  • Length: 1.970"< li>
  • I.D. 2.000"< li> < UL> (Part No: 170429)
$18.50
Pivot Bushing, Rear -
  • For John Deere tractor models 2840, 2940, 3030, 3040, 3050, 3130, 3140, 3350< li>
  • Replaces John Deere OEM number L62837, L58228, T29199< li>
  • Length: 2.000"< li>
  • I.D. 1.526"< li> < UL> (Part No: 170430)
$15.76
Pivot Housing -
  • For John Deere tractor models 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8330, 8335R, 8360R, 8400, 8410, 8420, 8430, 8530< li>
  • Replaces John Deere OEM number RE62205< li> < UL> (Part No: 165053)
$135.50
Pivot Pin - Used front & rear, 4.375" long, 1.500" dia. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4230, 4320, 9900. (Part No: 108967)		$38.26
Pivot Pin - Rear -
  • For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 302, 302A, 380, 400, 401, 401B, 401C, 401D, 480, 480A, 480B, 480C< li>
  • Replaces John Deere OEM number R54195< li>
  • Length: 4.100"< li>
  • Diameter: 1.5727"< li> < UL> (Part No: 128476)
$43.50
Pivot Pin, Rear - 4.22" long, 1.49" O.D.. For tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N. (Part No: 172464)		$42.30
Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 2040, 2040S, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855N (Part No: 124690)		$1.80
Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Part No: 127236)		$925.00
Planetary Drive Shaft -
  • For John Deere tractor models 6140J, 6155J, 6800, 6900, 7200, 7210, 7400, 7405, 7410, 7420, 7425, 7500, 7505, 7510, 7515, 7520, 7525< li>
  • Replaces John Deere OEM number R182473, R105901, R328183, R217552, R328154< li> < UL> (Part No: 164177)
$206.00
Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Part No: 124631)		$121.80
Planetary Gear - For the following John Deere applications: 2140 with ZF APL735 Axle, 2750 with ZF APL735, 2850, 2755, 210C up to serial number 796033, 300D up to serial number 796033, 310C serial number 737488 and up, 310D up to serial number 796033, 315D up to serial number 796033, 482C up to serial number 796033. This part replaces John Deere part numbers L60111 and T116830 (Part No: 180655)		$208.00
Planetary Gear - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303 (European), 5320, 5325, 5403 (European), 5420, 5425, 5520, 5525, 5615 (Turkish), 5715 (Turkish)< li>
  • Replaces John Deere OEM number R212854< li>
  • Replaces Carraro manufacturer number 148396< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154704)
$120.00
Planetary Pinion Carrier - Used on John Deere 2140 serial number 460000 and later, 2750, 2950, 2955 before serial 765517, 3040 serial number 430000 and later, 3055, 3140 serial number 430000 and later, 5403, 5605, 5705. This part is used an Mechanical Four Wheel Drive APL 345 Axles. Replaces John Deere part number L40012. (Part No: 168955)		$1200.00
Planetary Pinion Carrier -
  • For John Deere tractor models 4555, 4560, 4640, 4650, 4755, 4760< li>
  • Replaces John Deere OEM number AR78257< li>
  • Replaces Casting number R63339< li> < UL> (Part No: 150151)
$1700.00
Planetary Pinion Carrier -
  • For John Deere tractor models 4640, 4840< li>
  • Replaces John Deere OEM number AR85312< li> < UL> (Part No: 166034)
$1300.00
Planetary Pinion Gear -
  • For John Deere tractor models 5200 (Use Collarshift, Synronized, or Hydraulic Reverser Transmission), 5210 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5220 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5225 (Use Syncroshuttle or Powereverser Transmission), 5300 (Use Collarshift, Synronized, or Hydraulic Reverser Transmission), 5310 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5310N (Use Syncroreverser Tansmission), 5320 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5320N (Use Syncroreverser Tansmission), 5325 (Use Syncroshuttle or Powereverser Transmission), 5325N (Use Powerreverser Transmission), 5400 (Use Collarshift, Synronized, or Hydraulic Reverser Transmission), 5400N (Use Syncroreverser Tansmission), 5403, 5410 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5415, 5420 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5420N (Use Syncroreverser Tansmission), 5425 (Use Syncroshuttle or Powereverser Transmission), 5425N (Use Syncroshuttle or Powereverser Transmission), 5500 (Use Collarshift, Synronized, or Hydraulic Reverser Transmission), 5500N (Use Syncroreverser Tansmission), 5510 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5510N (Use Syncroreverser Tansmission), 5520 (Use Collarshift, Syncroshuttle, or Powereverser Transmission), 5520N (Use Syncroreverser Tansmission), 5525 (Use Syncroshuttle or Powereverser Transmission), 5525N (Use Powerreverser Transmission), 5605, 5615, 5625 (Use Syncroshuttle or Powereverser Transmission), 5625 (Use Syncroshuttle Transmission), 5705, 5715, 5725 (Use Syncroshuttle Transmission)< li>
  • Replaces John Deere OEM number R113897< li> < UL> (Part No: 162614)
$74.00
Planetary Pinion Gear Shaft - The spline count on this shaft is 14 and 21. This part is used on tractors with Mechanical Four Wheel Drive. Replaces John Deere part number L60106 (Part No: 171462)		$66.00
Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Part No: 164180)		$378.00
Planetary Ring Gear - For Mechanical Four Wheel Drive, this planetary ring gear has 114 spines and an outside diameter of 8.16 inches. This part replaces OEM numbers 81452C1, 83927789, L40043 (Part No: 124630)		$375.00
Planetary Ring Gear - Used on John Deere models wit ZF APL735 front axles. This ring gear has 46 and 88 teeth. Models: 2140, 2141, 2251, 2351, 2541, 2651, 2750, 2755, 2850, 2941, 2951 (Part No: 179891)		$405.00
Planetary Ring Gear -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5203, 5204, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715< li>
  • Replaces John Deere OEM number RE271423< li> < UL> (Part No: 156224)
$520.00
Planetary Ring Gear -
  • For John Deere tractor models 6900, 6910, 6910S, 7405, 7500< li>
  • Replaces John Deere OEM number L110730< li> < UL> (Part No: 170509)
$780.00
Plantetary Carrier w/ Gears -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5203, 5204, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715< li>
  • Replaces John Deere OEM number RE271421< li> < UL> (Part No: 156225)
$1000.00
Plate, Wheel Manifold -
  • For John Deere tractor models 3020 (s n 123000-later), 4000 (s n 201000-later), 4020 (s n 201000-later), 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840< li>
  • Compatible with John Deere Combine(s) 6600, 6620, 7700, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5820< li>
  • Compatible with John Deere Construction & industrial models 670A (Automatic Blade Control System, Graders), 670B (Motor Graders), 670C (s n 582129-earlier, Motor Graders), 670CH (s n 582129-earlier, Motor Graders), 672A (Automatic Blade Control System, Graders), 672B (Motor Graders), 672CH (s n 582129-earlier, Motor Graders), 770A (Automatic Blade Control System, Graders), 770B (Motor Graders), 770BH (Motor Graders), 770C (s n 582129-earlier, Motor Graders), 770CH (s n 582129-earlier, Motor Graders), 772A (Automatic Blade Control System, Graders), 772B (Motor Graders), 772BH (Motor Graders), 772CH (s n 582129-earlier, Motor Graders)< li>
  • Replaces John Deere OEM number R42818 < li>
  • Power front wheel drive oil manifold and motor cylinder plate< li> < UL> (Part No: 171840)
$225.00
Poly Track Wheel Idler - Front -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8410T, 8520T< li>
  • Replaces John Deere OEM number RE221427< li>
  • Outer Diameter: 27.75"< li>
  • Width: 5"< li>
  • Hub I.D.: 6 5 8"< li>
  • 8 Bolt< li>
  • For a Remanufactured version of this sku use Item #: 210456< li> < UL> (Part No: 166476)
$1721.00
Power Steering Bearing Plate -
  • For John Deere tractor models 3020, 4000, 4020, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 4840< li>
  • Replaces John Deere OEM number R44406< li> < UL> (Part No: 165074)
$146.00
Power Steering Column Repair Kit - Used on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 3030, 3120, 3130, 820, (3 cylinder) 830 (3 cylinder), 940, this kit repairs columns on tractors with Power Steering. Replaces John Deere part numbers AT315816, AT26188 (Part No: 109848)		$51.00
Power Steering Cylinder - This Steering Cylinder measures 16.75 inches center-to-center, 18.75 inches overall length. Fits models 1641, 2140, 2141, 2350, 2355, 2541, 2550, 2555, 2750, 2755, 2940, 2941, 2950, 3140, 3141, 6110, 6120, 6200, 6210, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6420, 6430, 6500, 6510, 6520 (all 2WD with single acting cylinders, low axle). Verify OEM part number to ensure this is correct for your tractor. Replaces AL34542, AL36565, AL61553, RE17356, AL112919. (Part No: 108124)		$218.70
Power Steering Cylinder - The following John Deere models use this power steering cylinder: 5045E, 5055E, 5065E, 5065M, 5075M, 5076E, 5082E, 5083E, 5085E, 5085M, 5090E, 5090EH, 5093E, 5095M, 5095MH, 5100E, 5100M, 5100MH, 5101E, 5103, 5105M, 5105ML, 5115M, 5115ML, 5203, 5225, 5303, 5325, 5403, 5415, 5415H, 5425, 5525, 5603, 5605, 5615, 5625, 5705, 5715, 5715HC, 5725. Many of the models above used more than one front end. It is important to confirm part number before ordering. (Part No: 156226)		$620.00
Power Steering Cylinder - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204893< li>
  • Replaces Carraro manufacturer number 146343< li>
  • Hydraulic Cylinder< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154447)
$660.00
Power Steering Cylinder - Left Hand -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8330, 8335R, 8400, 8410, 8420, 8430, 8520< li>
  • Replaces John Deere OEM number RE287095, RE246379, RE210226, RE161018, RE60868, RE178755, RE65293< li>
  • Left Hand Side< li> < UL> (Part No: 156781)
$350.00
Power Steering Cylinder - Right Hand -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8330, 8335R, 8400, 8410, 8420, 8430, 8520< li>
  • Replaces John Deere OEM number RE287094, RE246378, RE178753, RE65292, RE60867, RE210225, RE261017< li>
  • Right Hand Side< li> < UL> (Part No: 156777)
$360.00
Power Steering Fill Hole Plug - For 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Power Steering Fill Hole Plug, Metal. Replaces OEM part numbers F1676R and 22050X. (Part No: 107801)		$12.76
Power Steering Hand Pump -
  • For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2950, 2955, 3040, 3140< li>
  • Replaces John Deere OEM number AT61108, AT116906, AT176906, AT168641< li>
  • Replaces manufacturer number 212-1089-002< li>
  • 2WD Tractors, May Require Adaptor Block, Has SAE Threads.< li> < UL> (Part No: 150766)
$475.00
Power Steering Hand Pump -
  • For John Deere tractor models 1640, 2040, 2040S, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3040, 3050, 3140, 3141, 3150, 3340, 3350, 3351, 3641, 3650, 3651< li>
  • Replaces John Deere OEM number AL41291< li> < UL> (Part No: 164832)
$570.00
Power Steering Kit - Contains all parts necessary to convert manual steering to power steering includes belt driven pump and reservoir, mounting flange, power steering cylinder, hydraulic pump, oil tank, pressure tube, inlet hose, 2 tie rod ends, pump connection, v-belt, pulley, and hardware. For tractor models 2030, (2040 diesel), 2130. (Part No: 191064)		$1099.95
Power Steering Kit - Contains all parts necessary to convert manual steering to power steering includes belt driven pump and reservoir, mounting flange, power steering cylinder, hydraulic pump, oil tank, pressure tube, inlet hose, 2 tie rod ends, pump connection, v-belt, pulley, and hardware. Does not work on tractors with a Loader. For tractor models 1020, 1120, 1130, 1520 3 cylinder tractors. (Part No: 104050)		$619.60
Power Steering Kit - For tractor models 1020, 1120, 1130, 1520 ALL With 3 CYL. Engine. Kit contains parts to convert manual steering to power steering, including belt driven pump and resevoir. Tractors with horizontal exhaust may need to be modified or changed to vertical exhaust. NOTE: Not recommended for applications with front end loaders. (Part No: 104050)$619.60
Power Steering Orbit Motor -
  • For John Deere tractor models 2750, 2755, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3040 (s n 430000-later), 3140 (s n 430000-later)< li>
  • Replaces John Deere OEM number AL69804, AL41635< li>
  • Replaces Char-Lynn 200-0476-002, 262-1003-073, 262-1003-074< li> < UL> (Part No: 165811)
$1125.00
Power Steering Overhaul Kit -
  • For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840< li>
  • Replaces John Deere OEM number AT315816< li> < UL> (Part No: 115328)
$154.00
Power Steering Pump -
  • For John Deere tractor models 770, 790, 870, 970, 990, 1070, 3005, 4005< li>
  • Replaces John Deere OEM number AM876753< li>
  • Splines: 12< li> < UL> (Part No: 163424)
$445.00
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1 8 inch keyway, 0.9715 inch total width for 1 2 inch belt. (Part No: 164438)		$48.76
Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Part No: 113859)		$103.30
Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Part No: 113860)$145.01
Power Steering Pump Shaft -
  • For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number F1687R< li>
  • Length: 10-1 2"< li>
  • Splines: 10< li> < UL> (Part No: 122234)
$280.00
Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Part No: 112629)		$194.10
Power Steering Valve Tie Rod - This Power steering valve tie rod measures 5.625 inches (136.25mm) Center to Center, an Inside Diameter of 0.624 inch (15.86mm) on one side and 0.75 inch (19mm) on the other side. Used on 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 300 Indust Const, 301 Indust Const, 310 Indust Const, 400 Indust Const, 401 Indust Const, 820, 830 It replaces original part number T25324 (Part No: 162164)		$103.00
PTO Clutch Lever Kit - Carraro -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number RE64728< li>
  • Replaces Carraro manufacturer number 350417< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154573)
$345.00
Pump Shaft - Pump Shaft. OEM part number is stamped in splined end of shaft, Used in 65CC (3.3 C.I.) pump, 6 cylinder engine. For JD 3140, 4000, 4020, 4040, 410, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C, 8430, 8440, 8450, 8630, 8640, 8650 (Part No: 113862)$108.99
Pump Shaft - Pump Shaft. OEm part number is stamped in splined end of shaft, Used in 66CC (4.3 C.I.) Pump, 6 Cylinder Engine. For JD 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 8430, 8440, 8630, 8640 tractors. (Part No: 113861)$95.00
Rear Axle Support -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number R271459< li> < UL> (Part No: 156238)
$375.01
Rear Axle Support - Carraro -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number R113788< li>
  • Replaces Carraro manufacturer number 126789< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154534)
$445.00
Rear Axle Support - Carraro -
  • For John Deere tractor models 5220, 5225, 5320, 5325, 5415, 5420, 5425 (s n 002631-earlier), 5520, 5525, 5603, 5615, 5625 (s n 001688-earlier), 5715, 5725 (s n 005047-earlier)< li>
  • Replaces John Deere OEM number R215087< li>
  • Replaces Carraro manufacturer number 149486< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154693)
$215.00
Rear Pivot Pin -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 8100, 8110, 8200, 8210, 8300, 8310, 8410< li>
  • Replaces John Deere OEM number R73635< li>
  • 4.847" Long< li>
  • 2.00" Diameter< li> < UL> (Part No: 110029)
$32.00
Rear Power Shaft Pinion Gear -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number AR94152< li>
  • Replaces John Deere Casting number R71577< li>
  • Marked R71577< li>
  • First Planetary Sun Gear< li> < UL> (Part No: 113384)
$204.00
Retainer -
  • For John Deere tractor models 8120, 8220, 8320, 8420, 8520< li>
  • Replaces John Deere OEM number R171858< li> < UL> (Part No: 128023)
$90.00
Ring Gear - For ZF APL2025 front axles and John Deere models 6100 and 6200 both up to serial number 124984. (Part No: 127598)		$610.00
Ring Gear - For For ZF APL2045 front axles on John Deere models 3400 Telehandler, 3415 Telehandler, 3420 Telehandler, 3800 Telehandler, 6505, 6506, 6605, 6610 Forage Harvester, 6615, 6715, 6800, 6810 Forage Harvester, 6820, 7210, 7220, 7230, 7405, 7410, 7500. 80 and 55 gears. ZF numbers 4475307008 (Part No: 168953)		$120.00
Ring Gear -
  • For John Deere tractor models 7210, 7410, 7510, 7610, 7630, 7710, 7715, 7720, 7730, 7810, 7815, 7820< li>
  • Replaces John Deere OEM number R130071< li> < UL> (Part No: 156342)
$410.00
Ring Gear -
  • For John Deere tractor models 2251, 2251N, 2351< li>
  • Replaces John Deere OEM number APL315< li> < UL> (Part No: 191016)
$568.16
Ring Gear and Pinion Set -
  • For John Deere tractor models 2350, 2855N< li>
  • Replaces John Deere OEM number AL38089, AL71025< li> < UL> (Part No: 191072)
$274.11
Rockshaft Cover Set -
  • For John Deere tractor models 2520, 3020 (s n 201001-later), 4000, 4020 (s n 201001-later), 4320< li>
  • Replaces John Deere OEM number AR40817, AR41599, R41231< li>
  • Includes Center Cover, Righ Hand Cover, Left Hand Cover less Tool Box< li> < UL> (Part No: 127316)
$355.00
Rockshaft Cover Set with Toolbox -
  • For John Deere tractor models 2520, 2530, 3020 (s n 201001-later), 4000, 4020 (s n 201001-later), 4320< li>
  • Replaces John Deere OEM number AR40817, AR41599, R41231< li>
  • Includes Center Cover, Righ Hand Cover, Left Hand Cover with Tool Box< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 127315)
$380.00
Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 1950, 2040, 2250, 2450, 2650 (Part No: 124691)		$40.20
Saddle Assembly -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020< li>
  • Replaces John Deere OEM number 7448< li>
  • For tractors with Schwartz wide front end conversions.< li> < UL> (Part No: 152012)
$750.00
Seal -
  • For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830, 7445, 7450, 7455, 9930, 9935, 9960, 9965, 9970, 9976< li>
  • Replaces John Deere OEM number L58008< li>
  • Hydrostatic Steering Unit Seal< li> < UL> (Part No: 165394)
$108.00
Seperator Plate -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 7200R, 7210, 7215R, 7230R, 7260R, 7280R, 7410, 7510, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430 (2006-2009), 8520< li>
  • Replaces John Deere OEM number R82908< li>
  • ID: 2.288"< li>
  • OD Major: 4.210"< li>
  • OD Minor: 3.697"< li>
  • Thickness: .060"< li>
  • Tabs: 4< li> < UL> (Part No: 128167)
$10.40
Shaft, Pinion - Pinion Shaft, MFWD. For tractor models 7630, 7715, 7720, 7730, 7815, 7820. (Part No: 114383)		$147.00
Shaft, Sun Gear - Sun Gear Shaft for models: 6300 (APL2035 SN# <124984) and 6400 (APL2035 SN# <124984). (Part No: 160585)		$56.00
Shaft, Sun Gear - Sun Gear Shaft for models: 6900 (APL2060; European), 6910 (APL2060; European SN# <225863), 6910S 6910S (APL2060; European SN# <225863), 7405 7405 (APL2060), 7500 7500 (APL2060). (Part No: 173270)		$138.00
Shift Collar -
  • For John Deere tractor model 4320< li>
  • Replaces John Deere OEM number R46437< li> < UL> (Part No: 123650)
$510.00
Spider U-Joint Assembly -
  • For John Deere tractor models 1550 (s n 750789-later), 1550 (s n 720000-750788), 1640 (s n 038265-048738), 1750 (s n 720000-750788), 1850 (s n 720000-later), 1850N, 1950 (s n 720000-later), 1950N, 2040 (s n 038265-048738, 450000-later), 2040S (s n 038265-048738, 450000-later), 2250, 2350 (s n 038265-048738), 2355, 2450, 2550 (s n 038265-048738), 2555, 2650, 2650N, 2755, 2850< li>
  • Replaces John Deere OEM number AL64255, AL65195, AL64126, AL71316< li> < UL> (Part No: 176288)
$77.70
Spindle - Right or left hand. Vertical length is 9.250 inches. For tractor models 2150, 2155, 2350, (2355 low version), 2550, (2555 low version), 2750, 2755, 6110L, 6120L, 6200, 6200L, 6210L, 6220L, 6300, 6300L, 6310L, 6310S, 6320L, 6400, 6400L, 6410L, 6410S, 6420L, 6500L, 6510L, 6510S, 6520L. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Part No: 104776)		$99.00
Spindle - This is used as right or left hand spindle. Vertical length is 14.98 inches, 1.750 inches shaft Diameter. Fits row crop tractors with adjustable axles. For tractor models 1640, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3140. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Part No: 102220)		$149.00
Spindle -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020 (All with Schwartz Front Axle)< li>
  • Replaces John Deere OEM number 3997< li>
  • Vertical Length 13-3 8< li>
  • Shaft Diameter 1-5 8< li>
  • Spindle Diameter 1-5 8< li>
  • Seal diameter 2.375"< li>
  • 6 Spline Spindle< li>
  • Inner Bearing diameter 1.688"< li>
  • Outer Bearing diameter 1.3115"< li>
  • Requires 1 inch fine threaded nut < li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 108820)
$204.00
Spindle -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020< li>
  • Vertical Length: 13-3 8"< li>
  • Shaft Diameter: 1-3 4"< li>
  • Spline Diameter: 1-5 8"< li>
  • Seal Diameter: 2.375"< li>
  • Inner Bearing Diameter: 1.688"< li>
  • Outer Bearing Diameter: 1.3115"< li> < UL> (Part No: 108957)
$280.00
Spindle -
  • For John Deere tractor models 60, 70, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number 3035< li>
  • Vertical length 11 3 8"< li>
  • Shaft dia. 1-5 8"< li>
  • Spline dia. 1-5 8"< li>
  • Inner brg. dia. 1.625"< li>
  • Outer brg. dia. 1.312"< li>
  • Seal dia. 2"< li> < UL> (Part No: 110831)
$224.70
Spindle - Spindle, LH RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, G, GH, 50, 520, 530, 60, 620, 630, 70, 720 All with Factory Wide Fronts only. The wheel bearing kit used on this spindle is kit part number WBKJD1. (Part No: 102209)		$305.00
Spindle - Spindle, LH RH. Dimension A-10.750 inch B-1.50 C-1.687 D-1.312 For 4000, 4230, ALL Low Profile. 3010, 3020, All Row Crop Utilities. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Part No: 102222)		$247.80
Spindle - Spindle, LH RH. Dimensions A-27.375 inch, B-1.50 inch, C-1.687 inch, D-1.312 inch. For 2510, 3020, 4000, 4010, 4020, All Hi-Crop, 2520 Hi-Crop SN# 21001 and up. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Part No: 104778)		$279.50
Spindle Bearing -
  • For John Deere tractor models 4500, 4510, 4600, 4610, 4700< li>
  • Replaces John Deere OEM number M138593< li> < UL> (Part No: 163632)
$10.86
Spindle Bolt Kit -
  • For John Deere tractor models 2510, 2520 (s n 022001-later), 3010, 3020, 4000, 4010, 4020, 4320 (All with Row Crop Front Axle)< li>
  • 5 8" x 2-3 4" steering arm spindle bolt< li>
  • Contains Bolt, Washer and Lock Washer< li>
  • Not for spindles with 3 4" x 1-3 4" bolt< li> < UL> (Part No: 154496)
$10.30
Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Part No: 113923)		$10.06
Spindle Bushing - Used on John Deere models: 2955, 3055, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6605, 6615, 6715, 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810, 310A (below serial number 700147), 310B (below serial number 700147), 401D (below serial number 700147), 480C (below serial number 700147). 1.750 Inside Diameter. Price shown is for each, sold only in multiples of 2 items. Replaces R49835 (Part No: 109646)		$7.00
Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 108046)		$9.76
Spindle Bushing -
  • For John Deere tractor models 2355 (GP models w extra heavy duty fixed axle), 2555 (GP models w extra heavy duty fixed axle), 2750 (GP models w extra heavy duty fixed axle), 2755 (GP models w extra heavy duty fixed axle), 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520< li>
  • Compatible with John Deere Harvester(s) 7450, 7455, 7460, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986< li>
  • Replaces John Deere OEM number R52188< li>
  • Spindle thrust washer use Item #: 109724< li> < UL> (Part No: 109561)
$9.76
Spindle - Carraro, Right Hand or Left Hand -
  • For John Deere tractor models 5105, 5205 (both 2WD with adjustable steering cylinder)< li>
  • Replaces John Deere OEM number RE73022< li>
  • Replaces Carraro manufacturer number 140502< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • 10" Shaft< li>
  • 1.378" Shaft Diameter< li>
  • 1.378" Large Race< li>
  • 0.984" Small Race< li>
  • Left Hand or Right Hand Side< li>
  • For a New version of this sku use Item #: 154426< li> < UL> (Part No: 157777)
$580.00
Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2282T (Part No: 115287)		$3.90
Spindle - Economy, RH / LH -
  • For John Deere tractor models 5105, 5205 (both 2WD with adjustable steering cylinder)< li>
  • Replaces John Deere OEM number RE73022< li>
  • Replaces Carraro manufacturer number 140502< li>
  • 10" Shaft< li>
  • 1.378" Diameter Shaft< li>
  • 1.378 Large Race< li>
  • 0.984" Small Race< li>
  • For a New version of this sku use Item #: 157777< li> < UL> (Part No: 154426)
$385.00
Spindle, Heavy Duty - Spindle, Heavy Duty. Dimensions A-15.125 inch B-1.750 inch C-1.795 inch D-1.312 inch For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. All with Heavy Duty Spindle. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Part No: 110031)		$270.00
Spindle, Hi-Crop LH and RH - Used on Hi-Crop Axles, the measurements on this spindle are: 28.625 inches, B - 1.750 inches, C - 1.968 inches, D - 1.312 inches. Used on the Hi-Crop variants of John Deere models: 4050, 4240, 4250, 4255, (4430 Also Order 1 Each Of JLM104948 and LM1049 bearings), 4440. Parts associated with this spindle are: R49835 Bushings, R49838 Thrust washer, R49841 Hub, WBKJD8 Wheel Bearing Kit, each sold individually. (Part No: 104780)		$500.00
Spindle, Left Hand - This new left hand spindle has a shaft length of 9.625 inches, shaft diameter of 1.377 inches, inner wheel bearing seat 1.377 inches, and outer bearing seat of 1.181 inches. It replaces RE45882, RE196179, RE208804. If replacing RE45882 bearing RE208806 will also be needed. RE208806 is available through a dealer. Fits John Deere Tractor(s) 5103, 5200, 5203, 5210, 5220 (Early S N Models), 5300, 5303 (Turkish Edition S N 000013 and earlier), 5310, 5320 (Early S N Model), 5400, 5403 (Turkish Edition S N 000175 and earlier), 5410, 5415 (S N 005672 and earlier), 5420 (Early S N Models), 5500 (Part No: 127421)		$345.00
Spindle, Left or Right Side - Has 14.687 x 1.75 inch Splined Upright Shaft. Inner bearing - 1.968 inches, Outer bearing - 1.312 inches. Used Left or Right side. 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7200 (to s n 010920), 7400, 7600, 7610 (to s n 010664), 7700, 7710 (to s n 011300), 7800, 7810 (to s n 013023). Uses 2 - R49835 Bushing, 2 - R49838 Thrust Washers, WBKJD8 Wheel Bearing Kit. Replaces: AR81954, RE57643. (Part No: 102224)		$209.00
Spindle, Left or Right Side - Used on left or right side on John Deere 4030 Tractors. It measures 14.750 inch shaft lenght (A), 1.500 inch shaft diameter (B), 1.795 inch inner bearing (C), 1.312 inch outer bearing. (Uses; 2-A877R bushings, 2-A890R thrust washers, WBKJD7 wheel bearing kit. Not included.) Replaces AR53850. (Part No: 104779)		$500.00
Spindle LH/RH - Shaft length 15.312 inches, shaft diameter 1.375 inch spindle inside bearing flat 1.375 inch, spindle outside bearing flat 842 inch. REPLACES: AR52860. Fits 1020, 1520, 1530, 2020, 2030, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 2755. Wheel Bearing Kit available separately, part number WBKJD3. (Part No: 102211)		$146.00
Spindle LH/RH - Vertical shaft length 11.875 inches, shaft diameter 1.375 inches, spindle inside bearing flat 1.375 inch, spindle outside bearing flat .842 inch. Keyway is to the rear. REPLACES: AR52861. Fits 1020, 1520, 1530, 2020 (swept back), 2030, 2040, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 820, 830. Wheel Bearing Kit available separately part number WBKJD3. Replaces AR103472, AR52861. (Part No: 102210)		$164.00
Spindle LH/RH - Measures A = 9.875 inch, B = 1.375 inch C = 1.375 inch, D =.842 inch. REPLACES OEM numbers: AR52862, AR58608. Fits: 1020 and 1520 (swept back), 1530, 1641, 1641F, 2020 (swept back), 2030 (< serial number 187300), 2040, 2240, 820, 830. Wheel Bearing Kit available separately as part number WBKJD3. (Part No: 102212)		$116.00
Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355(mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p n WBKJD3. (Part No: 102216)		$138.00
Spindle LH/RH - Measures A = 14.875", B = 1.5", C = 1.795", D = 1.312". Fits : 1020 (HD), 1520 (hi-knee), 2020(hi-knee), 2030(hi-knee), 2440 (< SN# 340999), 2630 (hi-knee), 2640 (< SN# 340999). Wheel Bearing kit available as part number WBKJD7_. (Part No: 102215)		$427.90
Spindle LH/RH - Measures A = 11.500", B = 1.500", C = 1.795", D = 1.312". Fits 1020 (medium knee), 1520 (medium knee), 2020 (medium knee), 2030 (medium knee), 2440 (< SN# 340999), 2630 (medium knee), 2640 (< SN# 340999). Wheel Bearing kit available as part number WBKJD7. (Part No: 102213)		$385.00
Spindle LH/RH with fender mtg brkt. - Measures A = 15.312", B = 1.375", C = 1.375", D =.842". Fits 1020, 1030, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2120, 2155 (hi-straight axle, 2355N, 940, 1040. Wheel Bearing kit available separately p n WBKJD2 or WBKJD3 Depending on application. Verify OEM of individual parts needed your your application. (Part No: 102219)		$140.00
Spindle, RH/LH - Measures A= 13.125", B= 1.374", C= 1.250", D= .750". For tractor models (1010 single row crop SN# 010001 to 042000), (40 SN# 69404 and up with standard axle), (320, 330, 420, 430 all with standard axles). The wheel bearing kit used on this spindle is kit part number WBKJD11. (Part No: 104762)		$225.80
Spindle, RH/LH - Measures A= 15.125", B= 1.500", C= 1.687", D= 1.312". For tractor models (2510, 3010, 3020, 4000, 4010, 4020, 4320 all row crop front axle), (2520 SN# 022001 and up row crop), 9900 cotton picker. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Part No: 102218)		$138.90
Spindle, RH/LH - Measures A= 9.313", B= 1.747", C= 1.795", D= 1.312". For tractor models (310, 310A SN# 237998 and up), 310B, (401D, 480C SN# up to 700147). The wheel bearing kit used on this spindle is kit part number WBKJD7. (Part No: 104773)		$640.10
Spindle, RH/LH - Measures A= 10.125", B= 1.750", C= 1.795", D= 1.312". For tractor models (300 SN# 136912 and up), 300B, 302, 302A, (310 SN# up to 237997), (400 SN# 136912 and up), 401, 401B, 401C, (480 SN# 136912 and up), 480A, 480B, (2640 SN# 341000 and up with straight non adjustable axle), 301A. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Part No: 104772)		$473.80
Spindle, Right Hand - This new left hand spindle has a shaft length of 9.625 inches, shaft diameter of 1.377 inches, inner wheel bearing seat 1.377 inches, and outer bearing seat of 1.181 inches. It If replacing spindle RE45883 bearing RE208806 will also be needed. RE208806 is available through a dealer. Fits John Deere Tractor(s) 5103, 5200, 5203, 5210, 5220 (Early S N Models), 5300, 5303 (Turkish Edition S N 000013 and earlier), 5310, 5320 (Early S N Model), 5400, 5403 (Turkish Edition S N 000175 and earlier), 5410, 5415 (S N 005672 and earlier), 5420 (Early S N Models), 5500 (Part No: 127420)		$360.90
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2140, 2250 (with 44.5mm king pin), 2350, 2355, 2450, 2550, 2555, 2650, 2755 (Hi-Version), 2850< li>
  • Replaces John Deere OEM number AL28222< li>
  • Dimension A: 14.875"< li>
  • Dimension B: 1.500"< li>
  • Dimension C: 1.795"< li>
  • Dimension D: 1.312"< li>
  • Left or Right Side< li> < UL> (Part No: 102217)
$163.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 4230, 4430< li>
  • Replaces John Deere OEM number AR69323< li>
  • Dimension A: 14.687"< li>
  • Dimension B: 1.750"< li>
  • Dimension C: 1.795"< li>
  • Dimension D: 1.312"< li>
  • Left or Right Side< li> < UL> (Part No: 102223)
$205.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 8100 (s n 020954 - earlier), 8200 (s n 020801 - earlier), 8300 (s n 021482 - earlier)< li>
  • Compatible with John Deere Harvester(s) 7450, 7455, 7460< li>
  • Replaces John Deere OEM number AN277398, AR53880, RE57644< li>
  • Dimension A: 14.750"< li>
  • Dimension B: 2.000"< li>
  • Dimension C: 2.250"< li>
  • Dimension D: 1.437"< li>
  • Left or Right Side< li> < UL> (Part No: 102225)
$355.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 1520 (with Fixed Front Axle), 2030 (s n 187300 - earlier)< li>
  • Compatible with John Deere Construction & industrial models 300, 400 (All s n 136911 - earlier)< li>
  • Replaces John Deere OEM number AT39457< li>
  • Dimension A: 10.375"< li>
  • Dimension B: 1.499"< li>
  • Dimension C: 1.795"< li>
  • Dimension D: 1.312"< li>
  • Left or Right Side< li> < UL> (Part No: 104763)
$650.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 1950N, 2150, 2155, 2355N, 2440, 2640 (All Low Knee 9.4"), 2855N< li>
  • Compatible with John Deere Construction & industrial models 301, 302, 401, 401B< li>
  • Replaces John Deere OEM number AT34973< li>
  • Dimension A: 9.500"< li>
  • Dimension B: 1.500"< li>
  • Dimension C: 1.795"< li>
  • Dimension D: 1.312"< li>
  • Left or Right Side< li> < UL> (Part No: 104764)
$465.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 2355, 2555, 2750, 2755 (All GP Models W Extra Heavy Duty Fixed Front Axle)< li>
  • Compatible with John Deere Construction & industrial models 410, 500< li>
  • Replaces John Deere OEM number AT76138< li>
  • Dimension A: 9.250"< li>
  • Dimension B: 2.000"< li>
  • Dimension C: 2.250"< li>
  • Dimension D: 1.437"< li>
  • Left or Right Side< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 104765)
$540.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 2440, 2640 (All s n 341000 - later)< li>
  • Replaces John Deere OEM number AR91149< li>
  • Left Hand or Right Hand Side< li>
  • Shaft: 11.812"< li>
  • Shaft Diameter: 1.375"< li>
  • Large Race: 1.625"< li>
  • Small Race: 1.250"< li>
  • Used Wheel Hub 6 Bolt use Item #: 104767< li> < UL> (Part No: 104766)
$270.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 2440, 2640 (All s n 341000 - later)< li>
  • Replaces John Deere OEM number AR91150< li>
  • Dimension A: 15.312"< li>
  • Dimension B: 1.375"< li>
  • Dimension C: 1.625"< li>
  • Dimension D: 1.250"< li>
  • Left or Right Side< li> < UL> (Part No: 104770)
$340.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 2440, 2640< li>
  • Replaces John Deere OEM number AR76932< li>
  • Dimension A: 11.5"< li>
  • Dimension B: 1.5"< li>
  • Dimension C: 1.625"< li>
  • Dimension D: 1.25"< li>
  • Left or Right Side< li>
  • Medium Knee< li> < UL> (Part No: 104771)
$299.30
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 2440 (Hi-Knee), 2640 (s n 331510 - later)< li>
  • Replaces John Deere OEM number AR76933< li>
  • Dimension A: 14.875"< li>
  • Dimension B: 1.500"< li>
  • Dimension C: 1.625"< li>
  • Dimension D: 1.250"< li>
  • Left or Right Side< li> < UL> (Part No: 104774)
$290.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 2355, 2555 (All Mid-Knee With Hydrostatic Steering), 2755 (12.19" Profile With Hydrostatic Steering)< li>
  • Replaces John Deere OEM number AL57578< li>
  • Dimension A: 12.000"< li>
  • Dimension B: 1.500"< li>
  • Dimension C: 1.795"< li>
  • Dimension D: 1.312"< li>
  • Left or Right Side< li> < UL> (Part No: 104775)
$467.30
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 6400, 6403, 6603, 7405< li>
  • Compatible with John Deere Harvester(s) 7500< li>
  • Replaces John Deere OEM number AP32677< li>
  • Dimension A: 12.250"< li>
  • Dimension B: 1.750"< li>
  • Dimension C: 1.968"< li>
  • Dimension D: 1.312"< li>
  • Right or Left Side< li>
  • 6 Bolt Front Wheel Hub use Item #: 102240< li> < UL> (Part No: 104781)
$446.30
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 7210 (s n 010920 - earlier), 7410 (s n 011540 - earlier), 7510 (s n 030000 - earlier)< li>
  • Compatible with John Deere Harvester(s) 7200, 7400< li>
  • Replaces John Deere OEM number RE51152, RE57642< li>
  • Dimension A: 12.937"< li>
  • Dimension B: 1.745"< li>
  • Dimension C: 1.967"< li>
  • Dimension D: 1.312"< li>
  • Right or Left Side< li> < UL> (Part No: 104783)
$245.00
Spindle - Right Hand/Left Hand -
  • For John Deere tractor models 7210 (Hi-Crop), 7410 (Hi-Crop), 7510 (Hi-Crop), 7610 (Hi-Crop), 7710 (Hi-Crop), 7810 (Hi-Crop)< li>
  • Replaces John Deere OEM number RE71277< li>
  • Dimension A: 14.687"< li>
  • Dimension B: 1.745"< li>
  • Dimension C: 1.967"< li>
  • Dimension D: 1.312"< li>
  • Right or Left Side< li>
  • 8 Bolt Front Wheel Hub use Item #: 102241< li> < UL> (Part No: 104784)
$330.50
Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Part No: 104207)		$7.76
Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2283T (Part No: 115286)		$1.86
Spindle Thrust Washer - This Spindle Thrust Washer measures 1 3 4 inches inside diameter, 3 inches outside diameter. Two are used per spindle, 4 per tractor. Sold individually. (Part No: 109830)		$3.00
Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Part No: 108047)		$5.99
Spindle Thrust Washer -
  • For John Deere tractor models 2355, 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7720, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520< li>
  • Compatible with John Deere Harvester(s) 7450, 7455, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986< li>
  • Replaces John Deere OEM number R30398< li>
  • Requires 2 per spindle< li> < UL> (Part No: 109724)
$10.20
Splindle, RH/LH - Spindle, LH RH. Dimensions A-12.750 inch B-1.50 inch C-1.687 inch D-1.312 inch. Fits 3010, 3020, 4000, 4010, 4020 All with Standard non-adj. front axle. The wheel bearing kit used on this spindle is kit part number WBKJD6. (Part No: 102221)		$174.00
Steeirng Cylinder Bushing -
  • For John Deere tractor models 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8400< li>
  • Replaces John Deere OEM number R95250< li>
  • O.D. 1.258"< li>
  • I.D. .991"< li>
  • Width: 1.310"< li> < UL> (Part No: 150240)
$4.00
Steering Arm - For 2955, 3055. Steering Arm - Right. (Part No: 104937)		$187.00
Steering Arm - For 2955, 3055. Steering Arm - Left. (Part No: 104938)		$194.00
Steering Arm - For 2940. Steering Arm - Left. (Part No: 104939)		$143.70
Steering Arm - For tractor models (2350, 2355, 2550, 2555, 2755), 2940 with dual cylinders. Steering Arm - Left (Part No: 104940)		$172.00
Steering Arm - For tractor models 2350, 2355, 2550, 2555, 2755, 2940. Steering Arm - Right. (Part No: 104941)		$165.00
Steering Arm - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. (Part No: 104951)$193.20
Steering Arm -
  • For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640< li>
  • Replaces John Deere OEM number L25879< li> < UL> (Part No: 104933)
$87.00
Steering Arm -
  • For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640< li>
  • Replaces John Deere OEM number L25880< li> < UL> (Part No: 104934)
$84.00
Steering Arm -
  • For John Deere tractor models 1950, 2150, 2155, 2355, 2440, 2640, 2855< li>
  • Compatible with John Deere Construction & industrial models 301, 302, 401< li>
  • Replaces John Deere OEM number T36705< li>
  • LH Steering Arm< li> < UL> (Part No: 104949)
$140.00
Steering Arm -
  • For John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020< li>
  • Replaces manufacturer number 2381< li> < UL> (Part No: 111425)
$102.00
Steering Arm - Left Hand - 1.750 Spline For 4555, 4560, 4630, 4640, 4650, 4755, 4760. Replaces OEM R49851 (Part No: 101865)$193.00
Steering Arm - Right Hand - 1.750 Spline For 4555, 4560, 4630, 4640, 4650, 4755, 4760. Replaces OEM R49849 (Part No: 102238)$192.00
Steering Arm - Left Hand - 1.750 Spline For 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Replaces OEM R61153 (Part No: 102699)		$158.40
Steering Arm - Right Hand - 1.750 Spline For 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 1.75 inch spindles with 6 splines. Replaces OEM R61152 (Part No: 102706)		$95.00
Steering Arm - Left Hand - 2.00 Spline For 4840, 4850, 4955, 4960. Replaces OEM R66129 (Part No: 100618)$107.16
Steering Arm - Right Hand - 2.00 Spline For 4840, 4850, 4955, 4960. Replaces OEM R66128 (Part No: 100548)$138.00
Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Part No: 115654)		$9.10
Steering Arm, Carraro - Left Hand -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R140047< li>
  • Replaces Carraro manufacturer number 140430< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • For right hand side use Item #: 159999< li> < UL> (Part No: 154576)
$355.00
Steering Arm, Carraro - Left Hand -
  • For John Deere tractor models 5045D, 5045E, 5050E, 5055D, 5065E, 5065M, 5075E, 5075M, 5076E, 5076EL, 5082E, 5085M, 5090E, 5090EH, 5090EL, 5090M, 5095M, 5095MH, 5100M, 5100ML, 5103, 5105, 5105M, 5105ML, 5115M, 5115ML, 5203, 5205, 5225, 5303, 5325, 5403, 5415, 5415H, 5420, 5425, 5520, 5525, 5615, 5625, 5715, 5715HC, 5725< li>
  • Replaces John Deere OEM number R217614< li>
  • Replaces Carraro manufacturer number 427564< li>
  • Fits Left Hand Side< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154710)
$130.00
Steering Arm, Carraro - Left Hand -
  • For John Deere tractor model 5076EF< li>
  • Replaces John Deere OEM number RE61837< li>
  • Replaces Carraro manufacturer number 127742< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154712)
$208.00
Steering Arm, Carraro - Right Hand -
  • For John Deere tractor model 5076EF< li>
  • Replaces John Deere OEM number RE61838< li>
  • Replaces Carraro manufacturer number 127741< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154713)
$145.00
Steering Arm, Carraro - Right Hand -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R140051< li>
  • Replaces Carraro manufacturer number 140431< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • For Steering Arm, Carraro - Left Hand use Item #: 154576< li> < UL> (Part No: 159999)
$355.00
Steering Arm - Center -
  • For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760 (all w o mfwd)< li>
  • Compatible with John Deere Harvester(s) 9940, 9950< li>
  • Replaces John Deere OEM number R51121< li>
  • Center Steering Arm< li> < UL> (Part No: 104966)
$194.00
Steering Arm, Center - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900. (Part No: 102703)		$91.90
Steering Arm, Center -
  • For John Deere tractor models 520, 620, 630, 720, 730, 2640< li>
  • Replaces John Deere OEM number F3176R< li>
  • Center Steering Arm< li> < UL> (Part No: 104964)
$88.00
Steering Arm - Left - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. Replaces B1236. (Part No: 104951)		$193.20
Steering Arm - Left - For tractor models 520, 530, 620, 630, 720, 730. Steering Arm - Left. 1.5" Diameter, 6 Spline. (Part No: 104953)		$166.00
Steering Arm - Left Hand -
  • For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555< li>
  • Replaces John Deere OEM number L28315< li>
  • LH Steering Arm< li> < UL> (Part No: 104932)
$145.60
Steering Arm - Left Hand -
  • For John Deere tractor models 2355, 2555, 2750, 2755 (All W Fixed Front Axle)< li>
  • Compatible with John Deere Construction & industrial models 310B (s n 700148-later), 401D (s n 700148-later), 410 (s n 244041-later), 480C (s n 700148-later), 500C< li>
  • Replaces John Deere OEM number T77483, T56517, T66939, T71746< li>
  • Splines: 31< li>
  • Fits left hand side< li>
  • For right hand side use Item #: 104945< li> < UL> (Part No: 104942)
$375.30
Steering Arm - Left Hand -
  • For John Deere tractor models 840, 940, 1020 (All w Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w Straight Fron Axle), 1530 (All w Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w Straight Fron Axle), 2030 (All w Straight Fron Axle), 2120, 2150, 2155 (All w Straight Fron Axle), 2240 (All w Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w Straight Fron Axle), 2630 (All w Straight Fron Axle), 2640 (All w Straight Fron Axle), 2755 (All Middle Version w Straight Fron Axle)< li>
  • Compatible with John Deere Construction & industrial models 301, 401< li>
  • Replaces John Deere OEM number T21619< li>
  • Fits Left Hand Side< li>
  • For Right Hand Side use Item #: 104957< li> < UL> (Part No: 104956)
$129.20
Steering Arm - Left Hand -
  • For John Deere tractor models 5020, 6030< li>
  • Replaces John Deere OEM number R52839, R40204< li>
  • 2.000" Dia< li>
  • 6 Spline< li>
  • LH Steering Arm< li> < UL> (Part No: 104963)
$260.00
Steering Arm - Left Hand -
  • For John Deere tractor models 6170R, 6190R, 7200R (s n 080000-earlier), 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R (s n 000101-053099), 8235R (s n 016001-090000), 8300, 8310, 8410< li>
  • Replaces John Deere OEM number R125164< li>
  • Left Hand< li>
  • 6 Splines< li> < UL> (Part No: 114548)
$280.00
Steering Arm - Left Hand -
  • For John Deere tractor models 7200 (Hi-Crop), 7210 (Hi-Crop), 7400 (Hi-Crop), 7410 (Hi-Crop), 7510 (Hi-Crop), 7600, 7610, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number L75847< li>
  • 6 Tooth< li>
  • Tapered spline< li>
  • Fits left hand side< li>
  • For right hand side use Item #: 118290< li> < UL> (Part No: 118289)
$270.00
Steering Arm - Left Hand -
  • For John Deere tractor models 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510< li>
  • Replaces John Deere OEM number R115659< li>
  • Left Hand< li>
  • 6 Tooth< li>
  • Tapered Spline< li> < UL> (Part No: 151947)
$209.00
Steering Arm, LH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Part No: 104947)		$229.00
Steering Arm, LH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Part No: 104954)		$191.10
Steering Arm, LH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Part No: 102705)		$46.00
Steering Arm, LH - Used on 4030 With Narrow or Wide front end, 4040 With Regular, Narrow, Wide or High Crop front, 4230 With Regular, Narrow, Wide or High Crop front, 9910 Cotton Picker, 9920 Cotton Picker. For 1.750-inch diameter spindles with 6 splines. 9.120-inch total length. Replaces R61157, R49828 (Part No: 104959)		$106.10
Steering Arm, LH - For tractor models 310, (310A up to SN# 369742), 310B up to SN# 700147. (Part No: 104943)		$420.00
Steering Arm Pin, Center - 1.249" diameter, 5.230" long. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Used with AT52868, AT52867, AT19793, AR93359, AR93358 and AT19794 center steering arms. Please check dimensions before ordering. (Part No: 163531)		$45.00
Steering Arm, RH - For tractor models JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 301A, 302, 302A, 401B, 401C, (1020, 1520, 2030, 2640, 300B all with fixed front axle). (Part No: 104946)		$236.30
Steering Arm, RH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Part No: 104955)		$156.00
Steering Arm, RH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Part No: 102704)		$59.00
Steering Arm, RH - This Right Hand steering arm is used on 4030 With Narrow or Wide front end, 4040 With Regular, Narrow, Wide or High Crop front, 4230 With Regular, Narrow, Wide or High Crop front, 9910 Cotton Picker, 9920 Cotton Picker. For 1.750-inch diameter spindles with 6 splines. 9.120-inch total length. Replaces R49827, R61156 (Part No: 104958)		$98.00
Steering Arm, RH - This Right Hand Steering Arm is used on 1.500 inch spindles with 6 splines. 9.120 inches total length. Used on John Deere 4030 with Regular Wide Front. Replaces R61154, R49825 (Part No: 104960)		$165.00
Steering Arm, RH - For tractor models 310, (310A up to SN# 369742), 310B up to SN# 700147. (Part No: 104944)		$367.90
Steering Arm - Right - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Right. Replaces B1236. (Part No: 104950)		$189.00
Steering Arm - Right - For tractor models 520, 530, 620, 630, 720, 730. Steering Arm - Right. 1.5" Diameter, 6 Spline. (Part No: 104952)		$178.30
Steering Arm - Right Hand -
  • For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555< li>
  • Replaces John Deere OEM number L28314< li>
  • RH Steering Arm< li> < UL> (Part No: 104931)
$99.90
Steering Arm - Right Hand -
  • For John Deere tractor models 2355, 2555, 2750, 2755 (All W Fixed Front Axle)< li>
  • Compatible with John Deere Construction & industrial models 310B (s n 700148-later), 401D (s n 700148-later), 410 (s n 244041-later), 480C (s n 700148-later), 500C< li>
  • Replaces John Deere OEM number T77482, T56516, T66938, T71745< li>
  • Splines: 31< li>
  • Fits right hand side< li>
  • For left hand side use Item #: 104942< li> < UL> (Part No: 104945)
$365.00
Steering Arm - Right Hand -
  • For John Deere tractor models 1950, 2150, 2155, 2355, 2440, 2640, 2855< li>
  • Compatible with John Deere Construction & industrial models 301, 302, 401< li>
  • Replaces John Deere OEM number T36704< li>
  • RH Steering Arm< li> < UL> (Part No: 104948)
$142.80
Steering Arm - Right Hand -
  • For John Deere tractor models 840, 940, 1020 (All w Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w Straight Fron Axle), 1530 (All w Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w Straight Fron Axle), 2030 (All w Straight Fron Axle), 2120, 2150, 2155 (All w Straight Fron Axle), 2240 (All w Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w Straight Fron Axle), 2630 (All w Straight Fron Axle), 2640 (All w Straight Fron Axle), 2755 (All Middle Version w Straight Fron Axle)< li>
  • Compatible with John Deere Construction & industrial models 301, 401< li>
  • Replaces John Deere OEM number T21618< li>
  • Fits Right Hand Side< li>
  • For Left Hand Side use Item #: 104956< li> < UL> (Part No: 104957)
$139.00
Steering Arm - Right Hand -
  • For John Deere tractor models 5020, 6030< li>
  • Replaces John Deere OEM number R40203, R52838< li>
  • 2.000" Dia< li>
  • 6 Spline< li>
  • RH Steering Arm< li> < UL> (Part No: 104962)
$210.76
Steering Arm - Right Hand -
  • For John Deere tractor models 6170R, 6190R, 7200R (s n 080000-earlier), 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R (s n 000101-053099), 8235R (s n 016001-090000), 8300, 8310, 8410< li>
  • Replaces John Deere OEM number R125163< li>
  • Right Hand< li>
  • 6 Splines< li> < UL> (Part No: 114547)
$265.00
Steering Arm - Right Hand -
  • For John Deere tractor models 7200 (Hi-Crop), 7210 (Hi-Crop), 7400 (Hi-Crop), 7410 (Hi-Crop), 7510 (Hi-Crop), 7600, 7610, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number L75846< li>
  • 6 Tooth< li>
  • Tapered spline< li>
  • Fits right hand side< li>
  • For left hand side use Item #: 118289< li> < UL> (Part No: 118290)
$263.80
Steering Arm - Right Hand -
  • For John Deere tractor models 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510< li>
  • Replaces John Deere OEM number R115658< li>
  • Right Hand< li>
  • 6 Tooth< li>
  • Tapered Spline< li> < UL> (Part No: 151946)
$205.00
Steering Ball Joint - Used on Carraro MFWD front axles, this part replaces John Deere part number AL204777. This ball joint is 8 5 8 inches overall with M24 x 1.5mm threads on one side and M26 x 1.5mm on the other. (Part No: 170119)		$130.99
Steering Block Valve, Remanufactured, AR77223 -
  • For John Deere tractor models 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970< li>
  • Replaces John Deere OEM number AR77223, AR96051< li>
  • Replaces Casting number R58808, R93556< li> < UL> (Part No: 207106)
$1100.01
Steering Bracket -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020< li>
  • Replaces manufacturer number WF29161< li>
  • Steering bracket with 5" drop< li>
  • Speeco steering bracket< li> < UL> (Part No: 176613)
$202.00
Steering Clutch Disc, Fiber - Disc is 8.554 inches O.D. 26 Internal Teeth. (Part No: 112073)		$30.26
Steering Clutch Disc, Steel - Disc is 9.268 inches O.D., 6.380 inches I.D. 6 External Ears. (Part No: 127279)		$20.00
Steering Clutch Pressure Plate - 8.5", 3 lever. For tractor models 1010, 40C, 420, 420 Crawler, 430 Crawler, 440, 440D, MC. Replaces AT11853, AM1930T, AT11486, AM987T, AP23494. (Part No: 173463)		$223.41
Steering Clutch Separator Disc - 8.12" I.D., 6 teeth. For model 450. (Part No: 127162)		$28.76
Steering Column Spring Shock -
  • For John Deere Construction & industrial models 210K, 210K (EP), 310J, 310K, 310SJ, 310SJ (TMC), 310SK, 310SKTC, 315SJ, 315SK, 325J, 325K, 325SK, 410J, 410J (TMC), 410K, 410KTC, 710J, 710K< li>
  • Replaces John Deere OEM number AT362814< li>
  • Steering Wheel & Tilt Column Cylinder< li> < UL> (Part No: 162145)
$80.00
Steering Column Spring Shock -
  • For John Deere Construction & industrial models 444K (s n 642100-earlier), 544K (s n 642664-earlier), 624K (s n 642634-earlier)< li>
  • Replaces John Deere OEM number AT357995, AT471882< li> < UL> (Part No: 163037)
$116.00
Steering Column Spring Shock Kit -
  • For John Deere Construction & industrial models TC54H, TC62H, 300, 300D, 310E, 310SE, 315D, 315SE, 410D, 410E, 444H, 444HLL, 444J, 444JR, 510D, 544H, 544HLL, 544J, 624H, 624HLL, 624J, 644H, 644J, 710D, 724J, 744H, 744J, 824J, 844J< li>
  • Replaces John Deere OEM number AT160662< li>
  • Steering Wheel & Tilt Column Cylinder< li> < UL> (Part No: 162146)
$144.00
Steering Control Unit - For tractor models (1640, 2040, 2040S, 2140 SN# up to 558049 with SG2 Cab), (2940 SN# up to 376553), (3040, 3140 all SN# up to 557668 or with cab SN# up to 558049), (1640, 2040, 3040, 3140 all european edition SN# up to 429999), (2040S, 2140 european edition SN# up to 429999 with OPU Cab), (3140, 3340 spain edition). Replaces AL35832, AL28268. (Part No: 164461)		$445.00
Steering Control Unit Valve -
  • For John Deere tractor models 2750, 2755, 2950< li>
  • Replaces John Deere OEM number AL69804< li>
  • Port Size: 18 x 1.5M< li> < UL> (Part No: 170511)
$1025.00
Steering Cylinder -
  • For John Deere tractor models 7200, 7210 (Axle s n 013452-earlier), 7400, 7410 (Axle s n 013452-earlier), 7600, 7610 (Axle s n 071933-earlier), 7700, 7710 (Axle s n 071933-earlier), 7800, 7810 (Axle s n 071933-earlier)< li>
  • Replaces John Deere OEM number RE60311, RE158651< li> < UL> (Part No: 174856)
$500.00
Steering Cylinder Ball Joint - Used on the left and right side, this ball joint is 9.50 inches over all. It has M26 X 1.5 right hand thread on the short side and M28 X 1.5 right hand thread on the long side. This part replaces John Deere part numbers AL209420 and AL160543. (Part No: 170399)		$110.30
Steering Cylinder Bolt, Adjustable -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R184214< li>
  • Replaces Carraro manufacturer number 142392< li>
  • Adjustable Steering Cylinder Bolt< li> < UL> (Part No: 154619)
$116.00
Steering Cylinder Cap -
  • For John Deere tractor models 5105, 5205, 5220, 5320, 5420, 5520< li>
  • Replaces John Deere OEM number RE54762< li>
  • Replaces Carraro manufacturer number 49129< li> < UL> (Part No: 154437)
$145.00
Steering Cylinder Cap -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R204896< li>
  • Replaces Carraro manufacturer number 49968< li> < UL> (Part No: 154439)
$275.00
Steering Cylinder - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73026< li>
  • Replaces Carraro manufacturer number 138477< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154444)
$630.00
Steering Cylinder - Carraro -
  • For John Deere tractor models 5076EF, 5076EN, 5083EN, 5090EN, 5093EN, 5101EN, 5310N, 5320N, 5325N, 5400N, 5415, 5420N, 5425N, 5500N, 5520N, 5525N< li>
  • Replaces John Deere OEM number RE61807< li>
  • Replaces Carraro manufacturer number 121541< li>
  • all 2WD< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154445)
$878.40
Steering Cylinder - Carraro -
  • For John Deere tractor models 5045D, 5045E, 5055E, 5065E, 5065M, 5070M, 5075E, 5075M, 5078E, 5080M, 5083E, 5085E, 5085M (s n 500001-later), 5093E, 5095M, 5100M (s n 500001-later), 5103 (s n 001433-earlier), 5105, 5105M, 5105ML, 5200, 5203 (s n 001134-earlier), 5204, 5205, 5210, 5225, 5300, 5303, 5310, 5325, 5400, 5403 (s n 000175-earlier), 5410, 5415, 5425 (s n 002632-earlier), 5500, 5503, 5510, 5610, 5615, 5625 (s n 001689-earlier), 5715, 5715HC, 5725 (s n 005048-earlier)< li>
  • Replaces John Deere OEM number RE284628< li>
  • Replaces Carraro manufacturer number 427300, 641511< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154711)
$660.00
Steering Cylinder Gasket Kit -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303 (European), 5320, 5325, 5403 (European), 5420, 5425, 5520, 5525, 5615 (Turkish), 5715 (Turkish)< li>
  • Replaces John Deere OEM number RE204894< li>
  • Replaces Carraro manufacturer number 49967< li> < UL> (Part No: 154678)
$82.00
Steering Cylinder Pin -
  • For John Deere tractor models 7600, 7610, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8400< li>
  • Replaces John Deere OEM number R153160, R95117< li>
  • Diameter: .982"< li>
  • Length: 4.803"< li>
  • Groove Diameter: .941"< li>
  • Groove Location From End: .453"< li>
  • Groove Width: .085"< li>
  • End to Hole: .374"< li> < UL> (Part No: 168339)
$20.00
Steering Cylinder Pin -
  • For John Deere tractor models 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9320, 9400, 9420, 9520, 9620< li>
  • Replaces John Deere OEM number R112154< li> < UL> (Part No: 168367)
$62.00
Steering Cylinder Pin -
  • For John Deere tractor models 4050, 4250, 4450, 4650, 4850, 5010, 5020, 6030< li>
  • Compatible with John Deere Construction & industrial models 500, 500A, 500B, 500C, 510, 600, 700A, 760, 760A< li>
  • Replaces John Deere OEM number R76513, R30917< li>
  • Steering Cylinder Pin< li> < UL> (Part No: 171606)
$14.50
Steering Cylinder Pin, Rod End -
  • For John Deere tractor models 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8300, 8310, 8310R, 8320, 8330, 8335R, 8400, 8410, 8420, 8430 (Model Year 2006-2009), 8520, 8530< li>
  • Replaces John Deere OEM number R133564< li> < UL> (Part No: 168370)
$22.00
Steering Cylinder Repair Kit - This Kit is used on MFWD (mechanical front-wheel drive) tractors: 7200, 7210 (Axle serial number 001001-75235), 7400, 7410 (Axle serial number 001001-75235), 7600, 7610 (Axle serial number 001001-75235), 7700, 7710 (Axle serial number 001001-75235), 7800, 7810 (Axle serial number 001001-75235), 8100 (Axle serial number below 029259), 8200 (Axle serial number below 029259), 8300 (Axle serial number below 029259), 8400 (Axle serial number below 029259). (Part No: 115329)		$51.00
Steering Cylinder Rod -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5220, 5225, 5303, 5310, 5320, 5325, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R214977< li>
  • Replaces Carraro manufacturer number 49969< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154449)
$415.00
Steering Cylinder Rod - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5320, 5420, 5520< li>
  • Replaces John Deere OEM number R140148< li>
  • Replaces Carraro manufacturer number 49070< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154436)
$460.00
Steering Cylinder Rod - Carraro -
  • For John Deere tractor models 5225, 5325, 5425, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R217816< li>
  • Replaces Carraro manufacturer number 49051< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154587)
$335.00
Steering Cylinder Seal Kit -
  • For John Deere tractor models 5105 (mfwd s n 411494-earlier), 5200 (mfwd), 5205 (mfwd s n 421397-earlier), 5210 (mfwd), 5220 (mfwd), 5300 (mfwd), 5310 (mfwd), 5320 (mfwd), 5400 (mfwd), 5410 (mfwd), 5420 (mfwd), 5425 (mfwd High Clearance), 5500 (mfwd), 5510 (mfwd), 5520 (mfwd), 5615 (mfwd), 5625 (mfwd High Clearance), 5715 (mfwd), 5725 (mfwd High Clearance)< li>
  • Replaces John Deere OEM number RE54761< li>
  • Replaces Carraro manufacturer number 49130< li> < UL> (Part No: 154677)
$83.00
Steering Cylinder Seal Kit -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303 (European), 5310, 5320, 5325, 5400, 5403 (European), 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5615 (Turkish), 5715 (Turkish)< li>
  • Replaces John Deere OEM number RE45894< li>
  • Replaces Carraro manufacturer number 49043< li> < UL> (Part No: 154682)
$140.00
Steering Cylinder Seal Kit -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE61842< li>
  • Replaces Carraro manufacturer number 49044< li> < UL> (Part No: 154689)
$108.00
Steering Gear Assembly - This Steering Gear Assembly is used on John Deere 650 and 750 Compact tractors. It replaces OEM Number CH14729 (Part No: 167333)		$499.89
Steering Hand Pump -
  • For John Deere tractor models 2350, 2355, 2550, 2555, 2755, 2855, 2855N, 3055 (with FWD), 3140 (s n 430000-later), 3255 (with FWD)< li>
  • Replaces John Deere OEM number AL69803< li>
  • Replaces manufacturer number 262-1168-001, 262-1168-002, 262-1002-074, 262-1002-073, 262-1001-073, 262-1001-074, 262-1167-002< li>
  • Port Size: 18 x 1.5mm< li> < UL> (Part No: 112159)
$810.00
Steering Hand Pump -
  • For John Deere tractor models 2955 (s n 767516-earlier), 3055, 3150, 3155, 3255< li>
  • Replaces John Deere OEM number AL69805, AL41636< li>
  • Replaces manufacturer number 262-1004-073, 262-1170-002< li> < UL> (Part No: 152181)
$1250.00
Steering Hand Pump -
  • For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2950, 2955, 3140< li>
  • Replaces John Deere OEM number AT61110, AL59903, AL59904, AL59972, AL59973, AL59902< li>
  • Replaces manufacturer number 212-1004-002, 262-1004-001< li>
  • Positively Identify Before Ordering< li>
  • For a Remanufactured version of this sku use Item #: 207254< li> < UL> (Part No: 155483)
$510.00
Steering Hand Pump -
  • For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955 (s n 767516-earlier), 3140< li>
  • Replaces John Deere OEM number AL41633, AL69802< li>
  • Replaces manufacturer number 262-1001-073, 262-1001-074, 262-1167-002< li>
  • Port Size 18 X 1.5MM< li>
  • For a Remanufactured version of this sku use Item #: 207133< li> < UL> (Part No: 160073)
$1275.00
Steering Knuckle, Carraro - Left Hand -
  • For John Deere tractor models 5215 (European), 5310 (European), 5315 (European), 5410 (European), 5415 (European), 5510 (European), 5515 (European)< li>
  • Replaces John Deere OEM number ER126738< li>
  • Replaces Carraro manufacturer number 126738< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154698)
$790.00
Steering Knuckle, Carraro - Right Hand -
  • For John Deere tractor models 5215 (European), 5310 (European), 5315 (European), 5410 (European), 5415 (European), 5510 (European), 5515 (European)< li>
  • Replaces John Deere OEM number ER126739< li>
  • Replaces Carraro manufacturer number 126739< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154699)
$690.00
Steering Knuckle Housing - Left Hand -
  • For John Deere tractor models 4050 (s n 007157-earlier), 4250 (s n 012778-earlier), 4450 (s n 024866-earlier)< li>
  • Replaces John Deere OEM number R83521, R78016< li>
  • Replaces ZF Casting number 4468 461 0680< li>
  • Fits Left Hand Side< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 163712)
$918.00
Steering Knuckle, Left Hand -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320 (Europe), 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420 (Europe), 6420L, 6420S (Europe), 6500, 6500L, 6510L, 6510S, 6520L< li>
  • Replaces John Deere OEM number L114787, L100236< li>
  • Fits left hand side< li>
  • For right hand use Item #: 162150< li> < UL> (Part No: 165998)
$1300.00
Steering Knuckle, Right Hand -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320 (Europe), 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420 (Europe), 6420L, 6420S (Europe), 6500, 6500L, 6510L, 6510S, 6520L< li>
  • Replaces John Deere OEM number L114786, L100235< li>
  • Fits right hand side< li> < UL> (Part No: 162150)
$1650.00
Steering Metering Pump, Remanufactured, AR86481 -
  • For John Deere tractor models 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number AR86481, MPR10166< li>
  • Does not include steering column or shaft< li> < UL> (Part No: 207234)
$570.01
Steering Motor -
  • For John Deere tractor models 2040S, 2140, 2940, 3040, 3140, 3340< li>
  • Replaces John Deere OEM number AL32758, AL35834, AL55956< li> < UL> (Part No: 164462)
$480.00
Steering Motor -
  • For John Deere tractor models 1641, 2040, 2140, 2141, 2251, 2351, 2541, 2651, 2941, 2951, 3141, 3351, 3641< li>
  • Replaces John Deere OEM number AL41604< li> < UL> (Part No: 164463)
$660.00
Steering Motor -
  • For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2755, 2850, 3050, 3350< li>
  • Replaces John Deere OEM number AL41631< li> < UL> (Part No: 164464)
$650.00
Steering Motor -
  • For John Deere tractor models 3050, 3140, 3350, 3640, 3650< li>
  • Replaces John Deere OEM number AL55296< li> < UL> (Part No: 164465)
$690.00
Steering Orbital Motor -
  • For John Deere tractor models 3200, 3400, 7220, 7320, 7405, 7420, 7505, 7520< li>
  • Replaces John Deere OEM number AL114630, AL119235< li> < UL> (Part No: 165036)
$1475.00
Steering Orbital Motor -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6505, 6510L, 6510S, 6515, 6520L, 6615, 6715< li>
  • Replaces John Deere OEM number AL110258< li> < UL> (Part No: 165037)
$830.00
Steering Pin -
  • For John Deere tractor models M, 40, 320, 330, 420, 430, 435, 450, 1010< li>
  • Replaces John Deere OEM number AM1514T, AM1515T< li>
  • Length 1"< li>
  • 405 Pin Diameter< li>
  • 590 Diameter Stop Ring< li>
  • 307 Height of Taper < li>
  • Taper .358-.475< li> < UL> (Part No: 126708)
$31.50
Steering Pin Seal -
  • For John Deere tractor models 7200, 7210 (s n 001001-075235), 7400, 7410 (s n 001001-075235), 7600, 7610 (s n 001001-075235), 7700, 7710 (s n 001001-075235), 7800, 7810 (s n 001001-075235), 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8430, 8520, 8530< li>
  • Replaces John Deere OEM number R95119< li> < UL> (Part No: 168336)
$5.00
Steering Rod - Carraro -
  • For John Deere tractor model 5076EF< li>
  • Replaces John Deere OEM number R126695< li>
  • Replaces Carraro manufacturer number 49046< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154714)
$290.00
Steering Shaft Arm - 4 teeth, .641" hole dia. For tractor models (1020, 1520, 1530, 2020 manual or power steering), (1030, 1120, 1130, 1630, 2120 european manual or power steering), (1040, 1140 european 2WD with clutch housing #AL33368), (1350, 1550, 1750, 1850 european with collar shift trans), (2030 power steering). (Part No: 163451)		$209.00
Steering Socket - This Steering Socket is used on the following John Deere compact tractors: 4500, 4510, 4600, 4610, 4700. Measures 5.33 inches (135.5mm) overall. Replaces LVA14040 (Part No: 182781)		$135.00
Steering Tube -
  • For John Deere tractor models M, MT, 40, 420, 430, 435< li>
  • Replaces John Deere OEM number AM1830T, AM2589T, AM2595T, AM3936T, AM3948T, AM438T, AT10263T, AT10768, AT10768T, AT10969T, T10677T, T11977T< li> < UL> (Part No: 126715)
$87.00
Steering Valve Assembly -
  • For John Deere tractor models 820, 830 (s n 258366-later), 920, 930 (s n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system)< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 310 (s n 163706-earlier), 400, 401 (all using closed center hydraulic system)< li>
  • Replaces John Deere OEM number AL31262, AL31515, AL70699, AT23175, RE10800< li>
  • Only for use with closed center hydraulic system< li>
  • Tall Housing - 15-1 2"< li>
  • Comes primered (color may vary). Prior to painting check fitment< li>
  • For a Remanufactured version of this sku use Item #: 205195< li> < UL> (Part No: 109847)
$880.00
Steering Valve Assembly - Remanufactured -
  • For John Deere tractor models 3010, 4010, 5010 (s n 004499-earlier)< li>
  • Shaft Housing No. R27508< li>
  • Valve No. R31623< li>
  • With Bleeder Port< li> < UL> (Part No: 200400)
$1175.01
Steering Valve Assembly - Remanufactured -
  • For John Deere tractor models 2510 (s n 014297-later), 2520, 3020 (s n 123000-later), 4000, 4020 (s n 201000-later), 4320, 4520, 4620 (Without Bleeder Port)< li>
  • Replaces John Deere OEM number AR47290< li>
  • Shaft Housing No. R41124, R44846< li>
  • Valve No. R34119, R43721, R43962, R45811< li> < UL> (Part No: 200405)
$1050.01
Steering Valve Assembly - Remanufactured -
  • For John Deere tractor models 4030 (s n 008839-earlier), 4230 (s n 019558-earlier), 4430 (s n 027634-earlier), 4630 (s n 010646-earlier)< li>
  • Replaces John Deere OEM number AR56007, AR43809< li>
  • Shaft Housing No. R50874< li>
  • Valve No. R43962, R45811< li> < UL> (Part No: 200407)
$970.01
Steering Valve Assembly, Remanufactured -
  • For John Deere tractor models 3010, 4010, 5010 (s n 004499-earlier)< li>
  • Shaft Housing No. R27508< li>
  • Valve No. R26757< li> < UL> (Part No: 204295)
$1125.01
Steering Valve Assembly, Remanufactured -
  • For John Deere tractor models 4520, 4620 (With Bleeder Port)< li>
  • Shaft Housing No. R41124, R44846< li>
  • Valve No. R34119, R43721, R43962, R45811< li>
  • 2 Ports on the right side< li> < UL> (Part No: 205291)
$1150.01
Steering Valve Assembly, Remanufactured, AL31515 -
  • For John Deere tractor models 820, 830 (s n 258366-later), 920, 930 (s n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system)< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 302, 310 (s n 163706-earlier), 400, 401 (all using closed center hydraulic system)< li>
  • Replaces John Deere OEM number AL31515, AL31262, AL70699, AT23175, RE10800< li>
  • Marked L34450, R58041, R77312, R77314, T25295< li>
  • For a New version of this sku use Item #: 109847< li> < UL> (Part No: 205195)
$660.01
Steering Valve Assembly, Remanufactured, AL31515 -
  • For John Deere tractor models 2355, 2555, 2755 (All Using Closed Center Hydraulic System & Spacer L62506 Which Measures 4-5 8")< li>
  • Replaces John Deere OEM number AL31515, AL70699, AT23175, RE10800< li>
  • Marked L34450, R58041, R77312, R77314, T25295< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205196)
$1100.01
Steering Valve Assembly, Remanufactured, AL31515 -
  • For John Deere tractor model 2855N (Using closed center system & Spacer L63420)< li>
  • Replaces John Deere OEM number AL31515, AL70699, AT23175, RE10800< li>
  • Marked L34450, R58041, R77312, R77314, T25295< li> < UL> (Part No: 205197)
$1100.01
Steering Valve Assembly, Remanufactured, AL31515 -
  • For John Deere tractor models 820, 830 (s n 258365-earlier), 920, 930 (s n 258365-earlier), 2040 (s n 266749-earlier)< li>
  • Replaces John Deere OEM number AL31515, AL70699, AT23175, RE10800< li>
  • All using open center hydraulic system< li>
  • Marked L34450, R58041, R77312, R77314, T25295< li>
  • Universal hydraulic oil (2.5 gallon) use Item #: 124173< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 205392)
$1100.01
Steering Valve Assembly, Remanufactured, AL70699 -
  • For John Deere tractor model 2840 (Using Closed Center Hydraulic System & Spacer T28270 Which Measures 7-3 8")< li>
  • Replaces John Deere OEM number AL70699, AL31515, AT23175, RE10800< li>
  • Marked L34450, R58041, R77312, R77314, T25295< li> < UL> (Part No: 205198)
$1100.01
Steering Valve Assembly, Remanufactured, AR56007, AR43809 -
  • For John Deere tractor models 4030 (s n 008839-earlier), 4230 (s n 019558-earlier), 4430 (s n 027634-earlier), 4630 (s n 010646-earlier)< li>
  • Replaces John Deere OEM number AR56007, AR43809< li>
  • Shaft Housing No. R50874< li>
  • Valve No. R43962, R45811< li>
  • Has extra port< li> < UL> (Part No: 205302)
$1100.01
Steering Valve Assembly - Remanufactured, R38110, R34119, R34962 -
  • For John Deere tractor model 2510 (s n 014296-earlier)< li>
  • Shaft Housing No. R38110< li>
  • Valve No. R34119, R43962< li> < UL> (Part No: 200402)
$1100.01
Steering Valve Assembly - Remanufactured, R51579, R42115 -
  • For John Deere tractor models 7020, 7520< li>
  • Shaft Housing No. R51579< li>
  • Valve No. R42115< li> < UL> (Part No: 200409)
$950.01
Steering Valve Housing Cover -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4010, 4020, 4230 (s n 019558-earlier), 4320, 4430 (s n 027634-earlier), 4520, 4620, 4630 (s n 010646-earlier), 5010, 5020, 6030, 7020, 7520< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123114-152141), 500B, 500C, 510, 740A, 743, 743A< li>
  • Replaces John Deere OEM number R57034< li> < UL> (Part No: 176703)
$139.04
Steering Valve, Remanufactured, AR37106 -
  • For John Deere Construction & industrial models 440 (s n 90320-earlier), 540< li>
  • Replaces John Deere OEM number AR37106, AR44737< li>
  • Shaft Housing No. R34118< li>
  • Plate No. R42707< li>
  • Valve No. R37425< li> < UL> (Part No: 205610)
$1100.01
Steering Wheel - Steering wheel, 16 1 2 diameter, 7 8" splined hub, 3-1 2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 & up, 4000, 4020 serial number 201000 & up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Part No: 113508)		$49.50
Steering Wheel - For L, LA, LI, M, MI, MT, Early 40, 320 to 325000. Steering wheel, steel spoked, 15" Diameter, 11 16 Keyed Hub. (Part No: 101402)		$34.76
Steering Wheel - 16-5 8" dia. 7 8 splined hub, textured finish. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. (Part No: 101450)		$52.00
Steering Wheel - 16" diameter, 7 8" splined hub, smooth finish, like original. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 4320, 4520, 4620, 5010, 5020, 6030, 7030, 7520. Uses cap for 2-7 16 inch opening. (Part No: 101447)		$41.76
Steering Wheel - 18" diameter, 7 8" splined hub, American Made Rubber, shiny bake-o-light. For early JD 2 cyl. tractor models 520 SN# 5208100 & up, 530, 620 SN# 6213100 & up, 630, 720 SN# 7214900 & up, 730, 820 SN# 8203100, 830. All with power steering. (Part No: 101446)		$57.01
Steering Wheel - 16" diameter, 3 4"-7 8" keyed, stepped hub, 3 flat spokes. For tractor models (B unstyled SN# 1000-59999), BR, BO. (Part No: 101444)		$39.00
Steering Wheel - 15" diameter, 11 16"-3 4" keyed, 3 steel spokes. For model H. (Part No: 101441)		$51.50
Steering Wheel - 15" diameter, 11 16"-3 4" keyed, 3 steel spokes. For tractor models L, LA, LI, M, MI, MT, (40 early). (Part No: 101402)		$34.76
Steering Wheel - 3 Spoke (covered). 18 inches in diameter. 11 16-3 4 shaft, keyed hub. Tractors 320 (SN# 325000 & up), 330, 420 (SN# 125000 & up with slant steering), 430, 435, 440. (Part No: 101443)		$61.23
Steering Wheel - This steering wheel is 16-5 8" inch diameter and has a 7 8 inch splined hub, with smooth finish. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. The proper cap to order for this steering wheel is part number AL155227. (Part No: 101448)$51.48
Steering Wheel - For A, D, G. Steering Wheel. Verify 18 Inch Diameter, Round Spokes, 13 16" Stepped Hub. (Part No: 101439)		$43.54
Steering Wheel - For A, D, G. Steering Wheel. 18" Diameter, Flat Spokes, 13 16" Stepped Hub. R3220 (Part No: 101436)		$44.20
Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5 8" Diameter, 13 16" Keyed Hub. 2447R (Part No: 101444)		$39.00
Steering Wheel - For B sn#60000-95999. Steering Wheel, 16" Diameter, Round Spokes, 3 4"-7 8" keyed, Stepped Hub. (Part No: 101438)		$46.50
Steering Wheel - For B sn#95999 and up. Steering Wheel, 16" Diameter, Round Spokes, 13 16" Stepped Hub. 3221R (Part No: 101438)		$46.50
Steering Wheel - For R, 70, 720, 80, 820 Without Power Steering. Steering Wheel, 20" Diameter, 4 Spokes, 11 16" Keyed Hub. (Part No: 101445)		$51.50
Steering Wheel - For 320 to SN# 325000, Late 40. Steering Wheel, 17 5 8" Diameter, 13 16" Stepped Hub. (Part No: 101442)		$51.50
Steering Wheel - This steering wheel is for early JD 2 cyl. tractor models 520, 530, 620, 630, 720, 730, 80, 820, 830 with Power Steering. 18" Diameter, 7 8" Splined Hub, Plastic Covered Foreign made. 2 7 16 cap opening. (Part No: 101446)		$57.01
Steering Wheel -
  • For John Deere tractor models A (s n 476999-earlier), AO (s n 271999-earlier), AR (s n 271999-earlier), D (s n 109944-143800), G (s n 7099-earlier)< li>
  • Replaces John Deere OEM number AA380R< li>
  • 18" diameter< li>
  • 13 16" keyed stepped hub< li>
  • 3 bare metal flat spokes< li> < UL> (Part No: 101437)
$51.50
Steering Wheel Acorn Nut - Stainless steel. For tractor models 50 SN# 20400 and above, 60 SN# 37000 and above, 70 SN# 13000, and above, 520 SN# 8099 and below, 620 SN# 13099 and below, 720 SN# 14899 and below, 80, 820 SN# 3099 and below. (Part No: 101458)		$15.95
Steering Wheel Cap - For tractor models 1010, 2010, 110, 112 all with manual steering. Replaces AT12678, AL155227 (Part No: 101454)		$73.90
Steering Wheel Cap - For tractor models 1020, 2020, 2510, 2520 all with manual steering. (Part No: 101455)		$82.00
Steering Wheel Cap - For tractor models 1010, 2010, 3010, 4010, 5010, 8020 all with power steering.R5082 (Part No: 101456)		$82.85
Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7 16 inch opening. Replaces AL118173, AL155227, R47998 (Part No: 101453)		$43.00
Steering Wheel Cap - For tractor models 320, 330, (420 with slant steering to SN# 139999), 430, 435, (520 from SN# 5208100 with power steering), (530, 630, 730 with power steering), (830 2-cyl with power steering), (620 from SN# 6213100 with power steering), (720 from SN# 7214900 with power steering), (820 2-cyl from SN# 8203100 with power steering). Replaces AL155227, F3629R (Part No: 101452)		$86.00
Steering Wheel Cap - For 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830 without Power Steering. Replaces OEM3630, F3630R (Part No: 101451)		$76.00
Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: 101457)		$48.50
Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: 101456)		$82.85
Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Part No: 157780)		$0.60
Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Part No: 157780)		$0.60
Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5 8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Part No: 183746)		$3.95
Steering Wheel Nut -
  • For John Deere tractor models H, HWH, M, MC, MT, 40, 320 (s n 325000-earlier), 420 (s n 124999-earlier)< li>
  • Replaces John Deere OEM number 14H398, AL2315< li>
  • 5 8" - 18 NF Thread< li>
  • .550" Tall< li> < UL> (Part No: 126724)
$3.46
Steering Wheel Plate - Fits John Deere 50 SN# #5020400 & up, 60 SN# #6037000 & up, 70 SN# #7013000 & up, 520 up to SN# #5208099, 620 up to SN# #6213099, 720 up to SN# #7214899, 80 & 820 up to SN# #8203099 (All with Power Steering), Replaces #F1744R (Part No: 101459)		$12.50
Steering Wheel Shaft Bushing -
  • For John Deere tractor models A (s n 460000-later), G (s n 47996-later), 60, 70, 620, 720< li>
  • Replaces John Deere OEM number A1910R< li>
  • 1.002" O.D.< li>
  • .940" I.D.< li>
  • 1.725" Long< li> < UL> (Part No: 114892)
$20.50
Steering Wheel Shaft Bushing -
  • For John Deere tractor models B (s n 201000-later), BN (s n 201000-later), BNH (s n 201000-later), BW (s n 201000-later), BWH (s n 201000-later), R, 50, 80, 520, 620, 820, 830< li>
  • Replaces John Deere OEM number B37R< li>
  • 1.739" Length< li>
  • 0.940" Outer Diameter< li>
  • 0.887" Inner Diameter< li> < UL> (Part No: 126725)
$21.00
Steering Wheel Shaft Bushing -
  • For John Deere tractor models 40 (Two Row Utility s n 60001-later), 40 (Standard s n 69404-later), 40 (Special s n 60001-later), 40 (Utility s n 63120-later), 40 (Tricycle s n 75499-later), 320 (s n 325000-earlier), 420 (s n 125000-earlier)< li>
  • Replaces John Deere OEM number M2757T, AM1830T< li>
  • Length 0.989"< li>
  • Thickness 0.065"< li>
  • Hole Diameter 0.750"< li> < UL> (Part No: 126726)
$25.00
Steering Wheel with Round Cap - 16-3 4" diameter, 7 8" center, 36 spline, 5" dish. For tractor models 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130. Replaces AL28548. (Part No: 101449)		$44.00
Steering Worm Shaft - Used on John Deere M, John Deere 40 Utility up to serial number 63119, and John Deere 40 Standard up to serial number 69403, this Steering Worm Shaft is 5.782 inches overall length. Replaces AM820T (Part No: 187571)		$199.27
Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197" Inside Diameter, a 1.700" outside diameter and is 455" Wide. Fits B, BN, BNH, BW, BWH (serial number 60000 and up), (50, 520, 530 with Manual Steering Only) It replaces original part number JD7396 (Part No: 126732)		$20.26
Steering Worm Shaft Bearing -
  • For John Deere tractor models A, G< li>
  • Replaces John Deere OEM number JD7205< li>
  • Bore: 1.360"< li>
  • Width: .375"< li>
  • Radius: .14"< li> < UL> (Part No: 126731)
$19.76
Sun Gear -
  • For John Deere tractor models 6140J, 6155J, 6810, 6820, 6910, 6920, 7210, 7410, 7420, 7425, 7500, 7505, 7510, 7515, 7520, 7525< li>
  • Replaces John Deere OEM number L116104< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164132)
$253.00
Sun Gear Shaft -
  • For John Deere tractor models 6100 (s n 124984-earlier), 6200 (s n 124984-earlier)< li>
  • Replaces John Deere OEM number L100167< li>
  • Teeth: 16< li>
  • Splines: 22< li>
  • Length: 5 15 16"< li>
  • Groove: 1 Snap Ring Groove< li> < UL> (Part No: 151063)
$160.00
Sun Shaft -
  • For John Deere tractor models 6505, 6506, 6600, 6605, 6615, 6715, 6800, 6810, 7210, 7405, 7410, 7500< li>
  • Replaces John Deere OEM number L101650< li> < UL> (Part No: 128347)
$76.70
Sun Shaft -
  • For John Deere tractor models 6110, 6110L, 6120, 6120L, 6200 (s n 124985-later), 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300L, 6310L, 6320, 6320L, 6400L, 6405, 6410L, 6415, 6420, 6420L, 6510L< li>
  • Compatible with John Deere Construction & industrial models 3200, 3215 (s n 206800-earlier), 3220 (s n 206800-earlier), 3400, 3415 (s n 206800-earlier), 3420 (s n 206800-earlier)< li>
  • Replaces John Deere OEM number L110236, 4475304081, 04423796< li>
  • Drive Shaft For ZF APL2025 Front Axles< li>
  • Teeth: 16< li>
  • Splines: 22< li>
  • Length: 4 15 16"< li>
  • Groove: 1 Snap Ring Groove< li> < UL> (Part No: 150994)
$94.70
Suspension Rod -
  • For John Deere tractor models 7200 (J), 7230 (J), 7630, 7720, 7730, 7820, 7830, 7920, 7930< li>
  • Replaces John Deere OEM number RE182881, RE288103< li> < UL> (Part No: 167819)
$152.30
Swivel Housing, Carraro - Left Hand -
  • For John Deere tractor models 5320, 5325, 5420, 5425, 5520, 5525< li>
  • Replaces John Deere OEM number RE195986< li>
  • Replaces Carraro manufacturer number 145014< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154591)
$870.00
Swivel Housing, Carraro - Right Hand -
  • For John Deere tractor models 5310, 5320, 5400, 5415, 5420, 5500, 5510, 5520< li>
  • Replaces John Deere OEM number RE61825< li>
  • Replaces Carraro manufacturer number 129074< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154593)
$820.00
Swivel Housing, Carraro - Right Hand -
  • For John Deere tractor models 5320, 5325, 5420, 5425, 5520, 5525< li>
  • Replaces John Deere OEM number RE195985< li>
  • Replaces Carraro manufacturer number 145013< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154594)
$770.00
Swivel Housing Kit, Carraro - Left Hand -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520< li>
  • Replaces John Deere OEM number SJ19586, RE54736< li>
  • Replaces Carraro manufacturer number 68844< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154707)
$1025.00
Swivel Housing Kit, Carraro - Left Hand -
  • For John Deere tractor models 5310, 5320, 5400, 5420, 5500, 5510, 5520< li>
  • Replaces John Deere OEM number SJ21412< li>
  • Replaces Carraro manufacturer number 64400< li>
  • Manufactured by Carraro to exact OEM specifications< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154721)
$830.00
Swivel Housing Kit, Carraro - Right Hand -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520< li>
  • Replaces John Deere OEM number SJ19585, RE54735< li>
  • Replaces Carraro manufacturer number 68845< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154706)
$1025.00
Swivel Housing Kit, Carraro - Right Hand -
  • For John Deere tractor models 5310, 5320, 5400, 5420, 5500, 5510, 5520< li>
  • Replaces John Deere OEM number SJ21413< li>
  • Replaces Carraro manufacturer number 64399< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154722)
$830.00
Swivel Housing Trunnion - Lower - Carraro -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE61824< li>
  • Replaces Carraro manufacturer number 129207< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154720)
$42.50
Swivel Housing Trunnion - Upper - Carraro -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE61823< li>
  • Replaces Carraro manufacturer number 129602< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154719)
$53.26
Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349 819310, 819349 (Part No: 156177)		$93.00
Thrust Washer -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810< li>
  • Replaces John Deere OEM number R83451< li>
  • ID: 2.073"< li>
  • OD: 2.763"< li> < UL> (Part No: 128165)
$5.90
Thrust Washer -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 7200, 7210, 7400, 7410, 7420, 7510, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8230, 8300, 8310, 8320, 8330, 8400, 8410, 8430 (model year 2006-2009)< li>
  • Replaces John Deere OEM number R100774, R83453, R94584< li>
  • ID: 1.184"< li>
  • OD: 1.972"< li> < UL> (Part No: 128169)
$7.30
Thrust Washer -
  • For John Deere tractor models 301, 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355 (HD Axles), 2450, 2550, 2555 (HD Axles), 2640 (With Straight Non-Adj. Axle s n 341000-later), 2650, 2750, 2755 (HD Axles), 2840, 2850, 2940, 3040, 3130 (s n 186270-later), 3140, 3150 (STD Duty), 3350 (STD Duty)< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310 (s n 237997-earlier), 400, 401, 480A, 480B< li>
  • Replaces John Deere OEM number T31749< li> < UL> (Part No: 158880)
$5.30
Thrust Washer -
  • For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2640 (s n 341000-later), 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3130 (s n 186270-later), 3140, 3150, 3350< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 302A, 310 (s n 237997-earlier), 400, 401, 480A, 480B< li>
  • Replaces John Deere OEM number T34548< li> < UL> (Part No: 163643)
$1.26
Tied Rod Tube - 12.620" long, .875" O.D. For tractor models M, MC, MT, 1010, 320, 330, 40, 430 all with adjustable axles. (Part No: 104819)		$99.70
Tie Rod - Tie Rod. Dimensions A-3.190 inch B-.687 inch 18NF Right Hand thread. For model JD 1010. (Part No: 104803)		$48.00
Tie Rod - Tie Rod. Dimensions A-3.220 inch B-.687 inch 18 RH thread. For JD 2010, 1010 SN# ->042001 (Part No: 105396)		$66.00
Tie Rod - Tie Rod. Dimensions A-12.000 inch B-.875 inch 10 holes. For 1010, 2010 tractors. (Part No: 104812)		$83.00
Tie Rod - Tie rod end, outer threaded, Left hand threads, 3-7 8 to center of post. For fixed front axles on tractors 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320. For 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: 104880)		$17.90
Tie Rod - Tie rod end, inner, threaded, right hand threads, 3-7 8 to center of post. For all adjustable front axles on tractors 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Part No: 102257)		$20.00
Tie Rod - Tie rod end, outer, drilled, 8 holes, 16-1 8 to center of post. For regulard and Hi-Crop adjustable front axles. Tractors 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Part No: 102255)		$33.99
Tie Rod - A= 11.125", B= .608". For tractor models 1010, (320, 330, 40, 420, 430, M all with std front axle). Replaces AM2001T. (Part No: 104786)		$65.00
Tie Rod - 3.880" long, 24mm dia. For tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N. Replaces AL37504. (Part No: 104795)		$24.00
Tie Rod -
  • For John Deere tractor models 6900 (with APL2060), 7405, 7420, 7510 (with ZF Front Axle), 7520 (All with AS2060)< li>
  • Compatible with John Deere Harvester(s) 7500 (with APL2060)< li>
  • Replaces John Deere OEM number AL119215, AL110928, 14M7523, AL113452, AL113453, L116259, VPJ3592, AL110918< li> < UL> (Part No: 104908)
$175.00
Tie Rod -
  • For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L< li>
  • Replaces John Deere OEM number AL37204< li>
  • Length: 18.750"< li>
  • Width: 1.250"< li> < UL> (Part No: 160188)
$65.00
Tie Rod -
  • For John Deere tractor models 420 (Row Crop Utility), 430 (Row Crop Utility)< li>
  • Replaces John Deere OEM number AM2984T< li>
  • Length: 11"< li>
  • Width: 0.608"< li> < UL> (Part No: 160191)
$98.70
Tie Rod -
  • For John Deere tractor models 4200 (2WD), 4210 (2WD), 4300 (2WD), 4310 (2WD), 4400 (2WD)< li>
  • Replaces John Deere OEM number LVU14549< li>
  • Length: 3.50"< li>
  • 1 2-20 UNF RH Thread< li> < UL> (Part No: 160197)
$66.00
Tie Rod, 11 Grooves - A= 12.50", B= 1.00", 16 RH. For tractor models JD300, JD400, (1020, 1520, 2020 all with swept back adj. axle). (Part No: 102244)		$35.00
Tie Rod, 12 Grooves - A= 14.750", B= .750". For tractor models (1520, 2020, 1020 with straight axle 48"-81"). (Part No: 104793)		$72.00
Tie Rod, 8 Grooves - 9.750" long, .750" shaft dia. For tractor models (1020, 2020 with swept back adj. axle 44"-66"). (Part No: 104794)		$138.00
Tie Rod Assembly - For tractor models (1020, 1030, 1040, 1130, 1140, 1520, 2020, 2030, 2630 with straight axle 48"-80"), (1530 with straight axle and 38" rear tires), 1630, 1640, 2120, (2240 SN# up to 349999 with straight axle and 38" rear tires), (2440, 2640 with straight axle 53"-79"), 840, 940, (JD301, JD401 with straight axle). (Part No: 104787)		$91.00
Tie Rod Assembly - Used on John Deere models: 3120 serial number 075016 and up, 3030, 3130 and 2840. This Assembly has a 14 inch Center Tube and contains AL38646 and AL38645. (Part No: 182611)		$231.00
Tie Rod Assembly - For 1020, 1030, 1040, 1120, 1130, 1630, 2020, 2120, 840, 940, (1140, 1350, 1550, 1750, 1850, 1950, 2250 all with Straight Front Axle), 1640 with Low Clearance Axle. Complete Tie Rod Assembly. The assembly consists of one each of AL39024, T29109, R50507 and AL39020. (Part No: 104827)		$105.80
Tie Rod Assembly - For 1030, 1040, 1120, 1350, 1550, 840, (1750, 1950N both with Swept Back Axle). Complete Tie Rod Assembly. This Assembly consists of one each of: AL39022, T25901, R50507 abd AL39020 (Part No: 104826)		$154.00
Tie Rod Assembly - For JD300, JD310, JD380, JD400, JD401, JD480, JD480A, JD480B, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with Fixed Front Axles. Tie Rod Assembly (Part No: 104861)		$94.00
Tie Rod Assembly - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. Tie Rod Assembly. HAS 11.5 Inch LENGTH ON INNER TIE ROD TUBE. Contains AR51584, AR27351, R28021, R28022, R28023, R28024 plus hardware. $5 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102252)		$91.40
Tie Rod Assembly - For tractor models 4320, (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 all with 88" Wide Tread). Complete Tie Rod Assembly. HAS 15.5 Inch LENGTH ON INNER TIE ROD TUBE. (Part No: 104871)		$93.90
Tie Rod Assembly - For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all with Narrow Row Wide Front End. (Part No: 104872)		$96.00
Tie Rod Assembly - For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all with Extra Wide Row Front Axle. Tie Rod Assembly. (Part No: 102257)		$20.00
Tie Rod Assembly - For tractor models 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 all Hi-Crop Models. (Part No: 104875)		$140.00
Tie Rod Assembly - For tractor models 4640 SN# up to 2436 with power front axles, (3630, 4040, 4230, 4250, 4430, 4440 all with power front axles. (Part No: 104886)		$167.00
Tie Rod Assembly - For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760 all with Regular Wide Front Axle. Tie Rod Assembly. (Part No: 104887)		$106.00
Tie Rod Assembly - For model 4640 SN# after 2437 with PFWD. Tie Rod Assembly. (Part No: 104898)		$184.75
Tie Rod Assembly - For tractor models 4840, 4850, 4955, 4960 all with regular wide front axles. Tie Rod Assembly. (Part No: 104899)		$99.00
Tie Rod Assembly -
  • For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950 (with APL315 325 Front Axle, Hydro Steering), 2040, 2040S (with APL325 Front Axle, s n 430000 - later), 2140 (Mfg in Spain, s n 133493 - later, with APL735 Front Axle, s n 430000 - later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750 (with APL735 Front Axle), 2755 (with APL735 Front Axle, s n 676090 - earlier), 2850 (Mfg in Spain)< li>
  • Replaces John Deere OEM number AL38097< li> < UL> (Part No: 104849)
$123.22
Tie Rod Assembly -
  • For John Deere tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760< li>
  • Replaces John Deere OEM number AR44341< li> < UL> (Part No: 104888)
$163.00
Tie Rod Assembly -
  • For John Deere tractor models 4840, 4850, 4955, 4960 (All with Extra Wide Front Axle)< li>
  • Replaces John Deere OEM number AR44344< li> < UL> (Part No: 104900)
$149.10
Tie Rod Assembly -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number RE271437< li> < UL> (Part No: 156227)
$201.00
Tie Rod Assembly -
  • For John Deere tractor models SE6520, SE6620, 6130M, 6130R, 6515, 6520, 6530, 6615, 6620, 6630, 6715, 7130, 7220 (s n 002762 - later), 7230, 7320 (s n 002762 - later)< li>
  • Replaces John Deere OEM number AL160539< li>
  • With or Without FWD axle TLS axle; 740< li> < UL> (Part No: 158233)
$315.00
Tie Rod Assembly -
  • For John Deere tractor models 1640 (Standard Clearance Axle), 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850< li>
  • Replaces John Deere OEM number AL82828, AL37505, AL32308, AL82826, L32307, L64251< li> < UL> (Part No: 160190)
$141.00
Tie Rod Assembly -
  • For John Deere tractor models 6090RC, 6095MC, 6095RC, 6100MC, 6100RC, 6105M, 6105MC, 6105R, 6105RC, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115R, 6115RC, 6120M, 6120R, 6125M, 6125R, 6130M, 6130R< li>
  • Replaces John Deere OEM number AL209979< li> < UL> (Part No: 165476)
$165.00
Tie Rod Assembly, Complete - Assembly consisting of AR63588 Inner Tie Rod, R54965 Tie Rod Tube, R28023 Clamp, AR63593 Long Tie Rod plus hardware. Used on extra wide front ends. This front end is found on some of the following John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (Part No: 104874)		$146.00
Tie Rod Assembly - Left - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Left Hand. (Part No: 104848)		$280.00
Tie Rod Assembly - Left Hand -
  • For John Deere tractor models 2140, 2750 (All with APL345 Front Axle), 3040, 3050, 3140 (All with APL345 Front Axle), 3150, 3350 (European Model)< li>
  • Replaces John Deere OEM number AL56439< li>
  • Fits Left Hand Side< li> < UL> (Part No: 104842)
$251.00
Tie Rod Assembly - Left Hand -
  • For John Deere tractor models 2140 (Mfg in Spain), 2750 (with APL345 Front Axle), 2950 (s n 26316 - earlier), 3040, 3140 (with APL345 Front Axle)< li>
  • Replaces John Deere OEM number AL38013< li>
  • Fits Left Hand Side< li> < UL> (Part No: 104846)
$173.30
Tie Rod Assembly - Right - For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Right Hand. (Part No: 104854)		$119.70
Tie Rod Assembly - Right Hand -
  • For John Deere tractor models 2140 (Mfg in Spain), 2750 (with APL345 Front Axle), 2950 (s n 26316 - earlier), 3040, 3140 (with APL345 Front Axle), 3340 (Mfg in Spain)< li>
  • Replaces John Deere OEM number AL39318, AL60161, AL38014< li>
  • Fits Right Hand Side< li> < UL> (Part No: 104845)
$165.00
Tie Rod Boot -
  • For John Deere tractor models 1640, 1840, 2040, 2940, 3040, 3140, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4955, 4960, 7210, 7410, 7510, 7600, 7610, 7700, 7710, 7810, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410< li>
  • Compatible with John Deere Combine(s) 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Replaces John Deere OEM number R78027< li> < UL> (Part No: 110514)
$11.20
Tie Rod Boot -
  • For John Deere tractor models 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4240, 4250, 4320, 4430, 4440, 4455< li>
  • Replaces John Deere OEM number R28019, R40589< li>
  • Replaces Allis Chalmers OEM number 70223558, 223558< li>
  • Base: 1.800"< li>
  • Height: 0.765"< li>
  • Hole I.D: 0.740"< li> < UL> (Part No: 165042)
$3.99
Tie Rod - Carraro -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303, 5310, 5325, 5403, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE217616< li>
  • Replaces Carraro manufacturer number 146771< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154620)
$140.00
Tie Rod - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204877< li>
  • Replaces Carraro manufacturer number 127456< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154622)
$163.00
Tie Rod, Carraro - Left Hand -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125541< li>
  • Replaces Carraro manufacturer number 121700< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154430)
$145.00
Tie Rod, Carraro - Right Hand -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125544< li>
  • Replaces Carraro manufacturer number 121701< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154432)
$80.00
Tie Rod Center - Measuring 8.20 inches overall, with M22 X 1.5 Right Hand thread on one side and M24 x 1.5 Right Had tread on the other, this steering joint is used on many John Deere models with ZF Axles, mechanical four wheel drive. Replaces John Deere Part Numbers AL80542, AL151996, AL168711, AL161302, AL60161, and EQ501479. (Part No: 128527)		$87.00
Tie Rod Center - Measuring 9 inches overall with M24 X 1.5 right hand thread on one side and M28 X 1.5 right had thread on the other, this part is used on John Deere 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650. This part replaces AL168703, AL68253. It used with AL68254 and AL68255. (Part No: 127440)		$97.00
Tie Rod Center - The overall length of this tie rod is 7.50 inches. It has M22 x 1.5 RH threads on one side and M20 x 1.5 RH thread on the other. Replaces John Deere part numbers AL80541, AL177964 (Part No: 176295)		$60.00
Tie Rod Clamp -
  • For John Deere tractor models 1010, 2010< li>
  • Replaces John Deere OEM number H145112< li>
  • Dimension A: 12.125"< li> < UL> (Part No: 104814)
$15.50
Tie Rod Clamp -
  • For John Deere tractor models 4040, 4230, 4250, 4430, 4440 (All with Power Front Axle), 4555, 4560, 4630, 4640, 4755, 4760< li>
  • Replaces John Deere OEM number M2301T< li> < UL> (Part No: 104884)
$3.00
Tie Rod Clamp -
  • For John Deere tractor models 4040, 4240, 4440, 4640 (s n 2437 - earlier), 4840, 4850, 4955, 4960, 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8300, 8310, 8400, 8410< li>
  • Compatible with John Deere Combine(s) 4425 (with Steering Cylinder), 6602, 6620, 6622, 7720, 8820< li>
  • Compatible with John Deere Harvester(s) 7450, 7455, 9935, 9960, 9965, 9970, 9976< li>
  • Replaces John Deere OEM number R66307< li> < UL> (Part No: 104889)
$6.70
Tie Rod End - Tie rod end, outer, 7 8-18 threaded, right handed threads, 3-3 8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230. (Part No: 104865)		$14.60
Tie Rod End - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. (Part No: 104866)		$23.30
Tie Rod End - Measures 3.11 inches (79.10mm) from center of ball joint to end of thread rod, 0.664 inch (16.88mm) outside diameter, Left Hand thread. Used on: 1050 Compact Tractor, 3005 Compact Tractor, 655 Compact Tractor, 670 Compact Tractor, 755 Compact Tractor, 756 Compact Tractor, 770 Compact Tractor, 790 Compact Tractor, 850 Compact Tractor, 855 Compact Tractor, 856 Compact Tractor, 950 Compact Tractor, 955 Compact Tractor. Also used on 1420 Riding Mower, 1435 Riding Mower, 1445 Riding Mower, 1545 Riding Mower, 1550 Riding Mower, 1570 Riding Mower, 1575 Riding Mower, 1580 Riding Mower, 1585 Riding Mower, 1600 Turf Mower, 3325 Turf Mower, F1145 Riding Mower. Replaces AM875940, AM878082, CH11734. (Part No: 161079)		$24.10
Tie Rod End - Measures: 3.12 inches, center of ball joint to end of threaded rod, M17 X 1.5 Right hand thread. Used on: 1050 Compact Tractor, 3005 Compact Tractor, 655 Compact Tractor, 670 Compact Tractor, 755 Compact Tractor, 756 Compact Tractor, 770 Compact Tractor, 790 Compact Tractor, 850 Compact Tractor, 855 Compact Tractor, 856 Compact Tractor, 950 Compact Tractor, 955 Compact Tractor. Also used on 1420 Riding Mower, 1435 Riding Mower, 1445 Riding Mower, 1545 Riding Mower, 1550 Riding Mower, 1570 Riding Mower, 1575 Riding Mower, 1580 Riding Mower, 1585 Riding Mower, 1600 Turf Mower, 3325 Turf Mower, F1145 Riding Mower. Replaces AM875952, AM878081, CH11733 (Part No: 161078)		$23.60
Tie Rod End - This Tie Rod End is 12.620 Inches long, 0.865 Inch Diameter Shaft with 6 notches. Used on 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2555, 2650, 2755, 2850, 2940, 2955, 3055, 3255. It replaces AL177945, AL27533, AL37505, AL82825 (Part No: 104796)		$24.99
Tie Rod End - Tie rod end with nut, 285.75 MM (11 1 4 inches) length and open metric end port of 18 MM with 1.5 metric right hand thread pitch. 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850. Replaces AL39319, AL168693. (Part No: 104829)		$32.49
Tie Rod End - Measures Overall Length 7" (177.8 mm); top M20 X 1.5 RH Thread; bottom M18 X 1.5 RH Thread. Used on 1550, 1640, 1750, 1850, 1950, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2850. Replaces 6000103261, AL178240, AL39320 (Part No: 105181)		$55.00
Tie Rod End - Short threaded, A= 4.187", B= 1.00", 16 thread. Used on 4640 Serial Number below 2436 WITH POWER FRONT AXLES), (3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD) Replaces AR63590. (Part No: 102271)		$15.00
Tie Rod End - This Tie Rod End is 22.500 Inches from the center of the ball joint to the end of the rod. The Rod is 1.116 inches in diameter. Used on (4640 Serial number below 2436 WITH POWER FRONT AXLES), 3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD. Replaces AR63587. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102260)		$39.00
Tie Rod End - This Tie Rod End is used on 2040S, 2140, 2940, 3040, 3140. It is 4.625 Inches from the center of the ball joint to the end of the rod. It has M24 X 1.5 Right Hand Thread. Replaces AL37523, AL34262, AL178019 (Part No: 128341)		$20.26
Tie Rod End - This Tie Rod End is used on John Deere 6900, 6910, 6910S, 6920, 6920S, 7405, 7420, 7425, 7500, 7505, 7510, 7520, 7525 It is 9.375 inches from the center of the ball joint to the end of rod side. M28 X 1.5 Right Hand Thread. Replaces original part numbers AL110923, AL116259, AL119379 (Part No: 104907)		$43.50
Tie Rod End - The Tie Rod is 7.86inches over all length. M18 x 1.5 RH thread. Replaces RE204878, 3426336V1, 3426336M1, 3626336M1 (Part No: 154428)		$122.00
Tie Rod End - Measures 3.14 inches (79.97mm) overall length, 0.94 inch (23.93mm) shaft with right hand thread. Used John Deere Compact Tractors models: 1070, 4005, 870, 970, 990. Replaces John Deere part numbers AM877125, AM878075 (Part No: 179638)		$28.00
Tie Rod End - Measures 3.14 inches (79.97mm) from center of ball joint to the end of threaded rod, 0.94 inch (23.93mm) diameter, Left Hand thread. USe don 1070 Compact Tractor, 4005 Compact Tractor, 870 Compact Tractor, 970 Compact Tractor, 990 Compact Tractor. Replaces AM877130, AM878076 (Part No: 173371)		$26.76
Tie Rod End - Measures LOA: 7 inches (177.8mm), OD: 2.01 inches (51.11mm), ID: 1.55 inches (39.46mm). It is used on John Deere 4500 Compact Tractor, 4510 Compact Tractor, 4600 Compact Tractor, 4610 Compact Tractor, 4700 Compact Tractor (Part No: 180502)		$86.00
Tie Rod End - Measures 8.858 inches from center of ball joint to end of tube. It is M22 X 1.5 Right Hand Thread. Replaces RE271441 (Part No: 173233)		$89.20
Tie Rod End - Measures 8.858 inches from center of ball joint to end of tube. It is M22 X 1.5 Right Hand Thread. Replaces RE271441 (Part No: 173233)		$89.20
Tie Rod End - The length of this tie rod is, from center of ball joint to the end of the rod is 13.620 inches. The shaft is 0.865 inches in diameter. There are 6 notches. Used on John Deere 2840, 3030, 3120, 3130, this part replaces John Deere OEM numbers AL38646, AL110130, AL27534, AL177948 (Part No: 104799)		$26.90
Tie Rod End - Used on John Deere 1850N, 1950F, 1950N, 2130, 2150, 2155, 2355N, 2840, 3030, 3120, 3130, this tie rod end measures 4.060 inches from the center of the ball joint to the end of the shaft. The threads are 24mm - 1.50. This part replaces John Deere part numbers AL26880, AL38645 (Part No: 104798)		$38.70
Tie Rod End - Used on John Deere 3120 compact tractors, this tie rod end measures 4 inches form the center of the ball joint to the end of the shaft. It has M20 X 1.5 Right Hand Thread. (Part No: 104860)		$41.76
Tie Rod End -
  • For John Deere tractor models 2355, 2555, 2750, 2755, 5010, 5020, 6030< li>
  • Replaces John Deere OEM number AR20032, AR74131< li>
  • 3.750" Long< li>
  • 1" Diameter< li>
  • 16 Right Hand Thread< li> < UL> (Part No: 102272)
$40.00
Tie Rod End -
  • For John Deere tractor models 2355, 2555, 2750, 2755, 5020, 6030 (All with fixed axle)< li>
  • Compatible with John Deere Construction & industrial models 500< li>
  • Replaces John Deere OEM number AR20033, AR74132< li>
  • 3.750" Long< li>
  • 1" Diameter< li>
  • 16 Left Hand Thread< li> < UL> (Part No: 102273)
$44.90
Tie Rod End -
  • For John Deere tractor models 4840, 4850, 4955, 4960 (All with Extra Wide Front Axle)< li>
  • Replaces John Deere OEM number AR85944< li>
  • Dimension A: 18.50"< li>
  • Dimension B: 1.186:< li>
  • 9 Cross Holes< li> < UL> (Part No: 104893)
$44.26
Tie Rod End -
  • For John Deere tractor models SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520, 2950, 2955, 3040, 3050, 3140, 3150, 3350, 6010, 6020, 6100, 6110, 6120, 6130, 6140J, 6155J, 6200, 6210, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6403, 6405, 6410, 6410L, 6410S, 6420, 6430, 6500, 6510, 6520, 6530, 6534, 6603, 6605, 6610, 6620, 6630, 7130, 7230, 7405, 7420, 7425, 7500, 7525< li>
  • Replaces John Deere OEM number AL68724< li>
  • Dimension A: 26.25"< li>
  • Dimension B: 1.250"< li>
  • Notched end< li> < UL> (Part No: 108720)
$214.20
Tie Rod End -
  • For John Deere tractor models 4200 (2WD), 4210 (2WD), 4300 (2WD), 4310 (2WD), 4400 (2WD)< li>
  • Replaces John Deere OEM number LVU14531< li> < UL> (Part No: 161828)
$58.00
Tie Rod End -
  • For John Deere tractor models 6090MC, 6090RC, 6095MC, 6095RC, 6100MC, 6100RC, 6105M, 6105MC, 6105R, 6105RC, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115R, 6115RC, 6120M, 6120R, 6125M, 6125R, 6130M, 6130R< li>
  • Replaces John Deere OEM number AL222371, AL211652< li> < UL> (Part No: 164978)
$141.14
Tie Rod End - Inner -
  • For John Deere tractor models 4555 (with regular wide front axle), 4560 (with regular wide front axle), 4630 (with regular wide front axle), 4640 (with regular wide front axle), 4650 (with regular wide front axle), 4755 (with regular wide front axle), 4760 (with regular wide front axle)< li>
  • Compatible with John Deere Harvester(s) 9940, 9950, 9960, 9965, 9970< li>
  • Replaces John Deere OEM number AR63589< li>
  • 3.437" Long< li>
  • 1" Diameter< li>
  • Right Hand Thread< li> < UL> (Part No: 102270)
$31.00
Tie Rod End, Inner - The overall length of this inner tie rod is 8.50 inches. One side has M26 X 1.5 RH Threads, the other is M24 X 1.5 RH Threads. Used with 730 and 733 Axles. (Part No: 128252)		$85.90
Tie Rod End - Left Hand -
  • For John Deere tractor models 950, 1050 (s n 0110000-earlier)< li>
  • Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 6620, 7700, 7720< li>
  • Compatible with John Deere Harvester(s) 484, 5200, 5400, 5420, 5440, 5460, 5720, 5730, 5820, 7440, 7445< li>
  • Compatible with John Deere Construction & industrial models 850< li>
  • Replaces John Deere OEM number AH75396< li>
  • Fits Left Hand Side< li>
  • .6875" Stem< li>
  • 18 RH Thread< li> < UL> (Part No: 110390)
$26.76
Tie Rod End, Left Outer - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R206539< li>
  • Replaces Carraro manufacturer number 352066< li>
  • Fits Left Hand Side< li>
  • For 2WD tractors with Adjustable Steering Cylinder< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154610)
$133.00
Tie Rod End Left Side - Used on John Deere 3050 and 3350 with mechanical four wheel drive and heavy duty ZF APL Axle, this tie rod end is 11.750 inches long with M24 x 1.5 right hand thread. (Part No: 104843)		$194.00
Tie Rod End. Left Side - This Tie Rod End is 11.750 Inches long from the center of the post to the end of the tube. It has M24 X 1.5 Right Hand Thread. It is used on (2140, 2750 Axle Serial number 024906 and up), (2950, 3040, 3140 Axle Serial Number 026317 and up), 3050, 3350. Replaces AL58013, AL168705 (Part No: 104856)		$85.70
Tie Rod End (LH) - Short Tie Rod, Dimensions A-3.350 inch B-.687 inch, 18 LH thread. For JD 520, 530, 620, 630, 720, 730 tractors (Part No: 102243)		$11.00
Tie Rod End (LH) - Measuring 12.500 inches, this left side tie rod end has M24 X 1.5 right hand tread. It is used on John Deere models: 2140 axle serial number below 024905, 2750 axle serial number below 024905, 2950 axle serial number below 026316, 3040 axle serial number below 026316, 3140 axle serial number below 026316. This part is used on ZF Axle 345 (Part No: 104858)		$104.00
Tie Rod End (LH) - The overall length of this tie rod end is 11.250 inches. I has 22M x 1.5 Right Hand Thread. This part replaces John Deere part numbers AL110957, AL80537 (Part No: 104902)		$81.00
Tie Rod End (LH) - Measuring 10.00 inches overall, this tie rod end has M24 X 1.5 RH Thread. This part replaces John Deere part numbers AL110887, AL168708, AL80534 (Part No: 104910)		$95.90
Tie Rod End, Outer - The length of this Tie Rod End from the center of the ball joint to the end of the tube is 6.750 inches. It has M24 x 1.5 RH Thread. Replaces AL161338, AL161301 (Part No: 128251)		$93.80
Tie Rod End, Outer - Used on John Deere 4040, 4240, 4440, (4640 after serial number 2437 with power front wheel drive), 4840, 4850, 4955, 4960. Verify measurements or part number before ordering. The tractors listed came with more than one front end. This part measures 4.871 inches from the center of the ball joint to the end of the threads, 1.125 inches diameter with 12 Thread. (Part No: 102265)		$23.00
Tie Rod End Outer, Left and Right - Used on both the left and right side, this tie rod end measures 8.50 inches from the center of the ball joint to the end of the tube. It has M28 X 1.5 Right Hand Thread. Replaces John Deere part numbers AL160203, AL160542, AL209601 (Part No: 179407)		$113.61
Tie Rod End (RH) - Measuring 12.375 inches, this left side tie rod end has M24 X 1.5 right hand tread. It is used on John Deere models: 2140 axle serial number below 024905, 2750 axle serial number below 024905, 2950 axle serial number below 026316, 3040 axle serial number below 026316, 3140 axle serial number below 026316. This part is used on ZF Axle 345. This part also replaces AL178073 (Part No: 104859)		$81.90
Tie Rod End (RH) - The overall length of this tie rod end is 11.250 inches. I has 22M x 1.5 Right Hand Thread. This part replaces John Deere part numbers AL80538, AL110956 (Part No: 104901)		$41.00
Tie Rod End (RH) - Measuring 10.00 inches overall, this tie rod end has M24 X 1.5 RH Thread. This part replaces John Deere part numbers AL110886, AL168709, AL80535 (Part No: 104911)		$82.00
Tie Rod End - Right Hand -
  • For John Deere tractor models 2140, 2750 (All with APL345 Front Axle), 3040, 3050, 3140 (All with APL345 Front Axle), 3150, 3350 (All European Model)< li>
  • Replaces John Deere OEM number AL56440< li>
  • Fits Right Hand Side< li> < UL> (Part No: 104841)
$249.70
Tie Rod End - Right Hand -
  • For John Deere tractor models 3120, 3203, 3320, 3520, 3720, 4120, 4200, 4210, 4300, 4310, 4320, 4400, 4410, 4510, 4520, 4600, 4610, 4700, 4710, 4720< li>
  • Compatible with John Deere Construction & industrial models 110< li>
  • Replaces John Deere OEM number LVA10728< li>
  • Length: 4.00"< li>
  • 1.00-16 UN Right Thread< li>
  • Fits Right Hand Side< li> < UL> (Part No: 156080)
$65.00
Tie Rod End - Right Outer - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R206540< li>
  • Replaces Carraro manufacturer number 352071< li>
  • Manufactured to exact OEM specifications< li> < UL> (Part No: 154611)
$150.00
Tie Rod End. Right Side - This Tie Rod End is 11.750 Inches long from the center of the post to the end of the tube. It has M24 X 1.5 Right Hand Thread. It is used on (2140, 2750 Axle Serial number 024906 and up), (2950, 3040, 3140 Axle Serial Number 026317 and up), 3050, 3350. Replaces (Part No: 104857)		$135.00
Tie Rod Inner - 4.187 Long 1.00 diameter with RH Threads For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle (Part No: 102271)		$15.00
Tie Rod Inner - 3.875 Long 1.125 diameter with 12 RH Threads For 4840, 4850, 4955, 4960 with Standard Front Axle (Part No: 102268)$29.00
Tie Rod, Inner - Inner Tie Rod. 1-1 8" inner diameter, 5-3 4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Part No: 102248)		$30.00
Tie Rod, Inner - Inner Tie Rod. Dimensions 5.000", 1.000" I.D. Thread For JD300, JD400, 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640 tractors. (Part No: 102250)		$29.00
Tie Rod Inner Bar -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303 (European), 5310, 5325, 5403 (European), 5420, 5425, 5520, 5525< li>
  • Replaces John Deere OEM number RE217818< li>
  • Replaces Carraro manufacturer number 45026< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154725)
$35.50
Tie Rod Inner Tube - 15.50 Long 1.00 diameter with 10 Holes For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 with 88 Tread Axle (Part No: 104870)$97.30
Tie Rod - Left Hand -
  • For John Deere tractor models 6200, 6300, 6400< li>
  • Replaces John Deere OEM number AL110342, AL79810< li>
  • Fits Left Hand Side< li> < UL> (Part No: 104904)
$205.00
Tie Rod - Left Hand -
  • For John Deere tractor models 3033R, 3039R, 3046R, 3120, 3203, 3320, 3520, 3720, 4044M, 4044R, 4052M, 4052R, 4066M, 4066R, 4105, 4120 (s n 470001 - later), 4200, 4210, 4300 (Axle Marked S20BZ107-1), 4310, 4320 (s n 470001 - later), 4400 (Axle Marked S20BZ107-1), 4410, 4500, 4520 (s n 470001 - later), 4600, 4700 (Axle Marked S20BZ108-1 or S20BZ112-1), 4720 (s n 470001 - later)< li>
  • Replaces John Deere OEM number LVA14960< li>
  • Fits Left Hand Side< li>
  • LH Thread< li>
  • M24 x 1.5 LH Thread< li> < UL> (Part No: 157742)
$66.00
Tie Rod, Left Side - This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3050, 3055, 3150, 3155, 3255, 3350, 3640, 3650, (3040, 3140 ALL WITH MFWD Serial Number 430000 and up) Replaces AL168701, AL68254 (Part No: 104850)		$61.00
Tie Rod - Long -
  • For John Deere tractor models 5080R, 5080RN, 5090R, 5090RN, 5100R, 5100RN, 5620, 5720, 5820< li>
  • Replaces John Deere OEM number AL178288, RE212814< li> < UL> (Part No: 165477)
$75.00
Tie Rod, Long - Tie rod end, outer, drilled, 9 holes, 18-3 4 to center of post. For wide adjustable front axles. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. (Part No: 102256)		$41.00
Tie Rod - Notched -
  • For John Deere tractor models 2355, 2555, 2755, 2955 (With 60"-80" Tread)< li>
  • Replaces John Deere OEM number AL68726< li>
  • Length: 30.25"< li>
  • Width: 1.25"< li> < UL> (Part No: 160189)
$285.00
Tie Rod - Outer -
  • For John Deere tractor models 1530, 2020, 2030, 2240, 2440, 2630, 2640< li>
  • Replaces John Deere OEM number AL39027< li>
  • Diameter: 0.781"< li>
  • Length: 14.50"< li>
  • 13 Notches< li> < UL> (Part No: 165947)
$49.50
Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Replaces AT23885 (Part No: 102249)		$26.30
Tie Rod Outer - 14.250 Long .995 diameter with 7 Holes. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Narrow Row Front Axle. (Part No: 102254)$37.80
Tie Rod Outer - 16.00 Long 1.00 diameter with 8 Holes For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Regular or Hi-Crop Front Axle (Part No: 102255)		$33.99
Tie Rod Outer - 18.750 Long .990 diameter with 9 Holes. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Extra Wide Front Axle. (Part No: 102256)		$41.00
Tie Rod Outer - 22.50 Long 1.116 diameter with 8 Holes For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102260)		$39.00
Tie Rod Outer - 16.250 Long 1.116 diameter with 8 Holes For 4555, 4560, 4630, 4640, 4650, 4755, 4760 with Standard Front Axle (Part No: 102262)		$37.60
Tie Rod Outer - 19.50 Long 1.116 diameter with 9 Holes For 4555, 4560, 4630, 4640, 4650, 4755, 4760 with Extra Wide Front Axle (Part No: 102263)		$71.40
Tie Rod Outer - 15.875 Long 1.187 diameter with 8 Holes For 4840, 4850, 4955, 4960 with Standard Front Axle (Part No: 102269)$45.00
Tie Rod, Outer - Long Outer Tie Rod. 15 grooves. Dimensions A-17.250 inch b-.750 inch. For tractor models JD 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Part No: 102247)		$29.80
Tie Rod, Outer - This Tie Rod is used on 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 7600, 7700, 7700 Combine, 7800, 9400 Combine, 9410 Combine, 9450 Combine, 9500 Combine, 9510 Combine, 9550 Combine, 9560 Combine, 9600 Combine, 9610 Combine, 9650 Combine, 9650CTS Combine, 9650STS Combine, 9660 Combine, 9660CTS Combine. It is 5.875 inches from the zerk fitting to the end of the shaft. The shaft is 1.125 inch diameter with left hand thread. It replaces part number RE12326 (Part No: 102267)		$45.90
Tie Rod, Outer - Tie rod end, LH or RH (outer), 14-1 4 inches, 0.995 inches shaft diameter with 7 through holes. Used on adjustable narrow front axles. Tractors: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. (Part No: 102254)		$37.80
Tie Rod, Outer - Measures: 21 inches from the center of the ball joint to the end of the shaft, 1.180 inches shaft diameter with 8 cross holes. This Outer tie rod is used on the left and right side of John Deere models: 4040, 4240, 4440, (4640 serial number 002437 and up with power front wheel drive). The models listed all came with more than one front axle. Verify measurements or OEM number before ordering. (Part No: 102264)		$45.00
Tie Rod, Outer, 13 Notch - A= 14.509", B= .781". For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 2020, 2030, 2120, 2240, 2440, 2630, 2640, JD301, JD401. (Part No: 102246)		$25.00
Tie Rod, Outer, 8 Notch - A= 9.250", B= .781". For tractor models 1020, 1120, 1130, 1140, 1530, 1630, 1641F, 2020, 2030, 2040, 2120, 2150, 2240, 2255, 820, 830, 920, 940, 1030. (Part No: 102245)		$22.26
Tie Rod Outer Tube - 12.375 Long .875 diameter with Internal Threads For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: 104868)		$31.00
Tie Rod, RH Thread, 4WD - This Tie Rod is 8.250 inches long. It has - M22 X 1.5 R H Threads on one side and - M24 X 1.5 R H Threads on the other. It is used on John Deere 2140, 2750, 2950, 3040, 3050, 3140, 3350, 210C, 300D, 310C, 310D, 315C, 315D, 410C, 410D, 482C, 510C, 510D, 610C. It Replaces AL60161, AL39316, AL178074, AL55011 (Part No: 104855)		$65.00
Tie Rod - Right Hand -
  • For John Deere tractor models 6200, 6300, 6400< li>
  • Replaces John Deere OEM number AL110343, AL79809< li>
  • Fits Right Hand Side< li> < UL> (Part No: 104903)
$195.00
Tie Rod Right Hand - Tie rod end, outer, threaded, right handed threads, 3-3 8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on d For 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 102242)		$11.00
Tie Rod, Right Side - This This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650 (Part No: 104851)		$62.00
Tie Rod Shaft - Carraro -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R208772< li>
  • Replaces Carraro manufacturer number 352068< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154623)
$129.00
Tie Rod Tube - Tie rod end, outer, drilled, 12.375 inches long, 2 holes, threaded on one end. For adjustable front axles on tractors: 2510, 2520, 3010, 3020, 4000*, 4010, 4020*, 4230 low profile, 4320*. Replaces AR 27350. *Also fits above models with power drive front axles. For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: 104868)		$31.00
Tie Rod Tube - 12.125" long. For tractor models (2010 with adj RC, RC Util, swept back, hi-crop axles), (1010 with swept back, adj. RC, straight adj axles). (Part No: 104813)		$67.20
Tie Rod Tube - 12.690 inches long, .760 inch inside diameter, 1.00 inch-16 right hand thread. For tractor models (1020, 1520, 2020 all with straight axle 40 inches to 80 inches tread). (Part No: 104815)		$48.50
Tie Rod Tube - 10.812" long, holes drilled through. For tractor models 1010, 2010. (Part No: 104817)		$74.00
Tie Rod Tube - 1.00 inch diameter, 8.880 inches long. For tractor models (1020, 2020 with swept back axle 44 inches to 66 inches tread). (Part No: 104818)		$60.00
Tie Rod Tube - 17.140" long, .750" I.D., 1.00-16 O.D. thread. For tractor models 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Part No: 104820)		$54.00
Tie Rod Tube - 11.250 inches long. For tractor models (1020, 1520, 2020 with swept back axle 48 inch to 78 inch), (JD300, JD400 with swept back axle). (Part No: 104821)		$49.70
Tie Rod Tube - 14.44 inches long, .875 inch left hand right hand thread. For tractor models (JD380, JD480A, JD480B all with fixed axles), (JD300, JD400, JD480, 1020, 1520, 2030, 300B, 301A, 302, 302A, 401B, 401C all with fixed front axles), (JD310 with fixed front axle serial number up to 237997), (JD401 all with fixed front axle standard with JD401A loader). (Part No: 104822)		$29.26
Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Part No: 104823)		$17.50
Tie Rod Tube - 12.218" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, (2020 with swept back axle), 2030, 2120, 2150, 2155, 2240, 2250, 2350, 2355, 2550, 2555, 2630, 2640, 2755, JD301, JD401. (Part No: 128344)		$25.76
Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830(3 Cyl), 920. Replaces T29106 (Part No: 104824)		$15.76
Tie Rod Tube - Used on John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. Verify part number or measurements before ordering. These tractors all came with more than one front end. Measures 17.500 inches long. One end is 7 8 X 18 right hand thread. The other side is 1.015 inches inside diameter. Replaces R54963, R54966, AR44338. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102258)		$25.16
Tie Rod Tube - Verify measurements before ordering. The models listed were built with more than one front end. This part measures 15.375 inches Long, 7 8 x 18 RH Thread on one end and 1.015 inches inside diameter on the other. Used on John Deere 4030, 4040, 4050, 4055, 4230, 4250, 4255, 4430, 4440, 4450, 4455 (Part No: 104873)		$17.26
Tie Rod Tube - Used on Extra Wide Row Front Ends, this tube measures 20.500 inches long with one end 7 8 X 18 RH Thread, and the other 1.015 inches inside diameter. The front end that this tube is used on can be found on John Deere models: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 102259)		$52.00
Tie Rod Tube - Used on some Power Front Ends and some Regular Wide front ends, this tie rod tube measures 17.375 inches over all with 1 X 16 RH Thread on one side and 1.143 inches inside diameter on the other. All of the tractors listed were produced if several front end variants. Verify measurements or part number before order. For John Deere models: 4040, 4230, 4240, 4250, 4430, 4440, 4560, 4630, 4640, 4650, 4755 (Part No: 102261)		$24.00
Tie Rod Tube -
  • For John Deere tractor models 1640, 1830, 1840, 2040, 2130, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850< li>
  • Replaces John Deere OEM number L32308< li>
  • 13.940" Long< li> < UL> (Part No: 104831)
$78.70
Tie Rod Tube -
  • For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L< li>
  • Replaces John Deere OEM number L39324< li>
  • 32.75" Long< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 104833)
$165.00
Tie Rod Tube -
  • For John Deere tractor models 2840, 3030, 3120, 3130< li>
  • Replaces John Deere OEM number L32311< li>
  • 15.690" Long< li> < UL> (Part No: 104834)
$12.76
Tie Rod Tube -
  • For John Deere tractor models 2350, 2355, 2550, 2750, 2755, 2950 (All with Wide Axle Hyd Steering), 2955 (All with 60" - 88" Tread)< li>
  • Replaces John Deere OEM number L64252< li>
  • 50.380" Long< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 104835)
$128.10
Tie Rod Tube -
  • For John Deere tractor models 2355, 2555, 2755, 2955 (All with 60" - 88" Tread)< li>
  • Replaces John Deere OEM number L64253< li>
  • 42.625" Long< li> < UL> (Part No: 104837)
$88.00
Tie Rod Tube -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320< li>
  • Replaces John Deere OEM number R28022< li>
  • 11.500" Long< li>
  • Small inner tube< li> < UL> (Part No: 104869)
$20.00
Tie Rod Tube -
  • For John Deere tractor models 4040, 4240, 4440, 4640 (s n 2437 - earlier)< li>
  • Replaces John Deere OEM number R66303< li>
  • 19.750" Long< li> < UL> (Part No: 104890)
$78.00
Tie Rod Tube -
  • For John Deere tractor models 4840, 4850, 4955, 4960 (All with Extra Wide Front Axle)< li>
  • Replaces John Deere OEM number R66304< li>
  • 20.750" Long< li> < UL> (Part No: 104892)
$76.00
Tie Rod Tube - For tractor models 1020, 1520, 2030, 300B with Fixed Front Axle. (Part No: 104822)		$29.26
Tie Rod Tube - 15.375 Long .875 diameter with Internal Threads For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Narrow Row Front Axle (Part No: 104873)$17.26
Tie Rod Tube - 18.375 Long .875 diameter with Internal Threads For 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 with Hi-Crop Front Axle (Part No: 184751)		$101.00
Tie Rod Tube - 17.375 Long 1.00 diameter with Internal Threads For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle4555, 4560, 4630, 4640, 4650, 4755, 4760 with Standard Front Axle (Part No: 102261)		$24.00
Tie Rod Tube - 19.750 Long 1.00 diameter with Internal Threads For 4555, 4560, 4630, 4640, 4650, 4755, 4760 with Extra Wide Front Axle (Part No: 104885)$106.10
Tie Rod Tube - 17 Long 1.125 diameter with Internal Threads For 4840, 4850, 4955, 4960 with Standard Front Axle (Part No: 104891)		$109.00
Tie Rod Tube - Carraro -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125546< li>
  • Replaces Carraro manufacturer number 121698< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154687)
$216.00
Tie Rod Tube - Left Hand -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, 4320 (All with Fixed Tread Standard Front Axle)< li>
  • Replaces John Deere OEM number R28115< li>
  • Fits Left Hand Side< li>
  • 19.375" Long< li> < UL> (Part No: 104879)
$16.50
Tie Rod Tube - Right Hand -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4230, 4320 (All with Fixed Tread Standard Front Axle)< li>
  • Replaces John Deere OEM number R28114< li>
  • 16.500" Long< li>
  • Right Hand Tie Rod Tube< li> < UL> (Part No: 104878)
$83.00
Track Wheel, Front Idler, Poly, Remanufactured, RE221427 -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8410T, 8520T< li>
  • Replaces John Deere OEM number RE221427< li>
  • Outer Diameter: 27.75"< li>
  • Width: 5"< li>
  • Hub I.D.: 6 5 8"< li>
  • 8 Bolt< li>
  • For a New version of this sku use Item #: 166476< li> < UL> (Part No: 210456)
$690.01
Track Wheel, Mid Roller, Cast, Poly, Bolt On, Remanufactured, RE212733 -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8410T, 8520T< li>
  • Replaces John Deere OEM number RE212733< li>
  • Outer Diameter: 14.5"< li>
  • Width: 5"< li>
  • Hub I.D.: 6"< li>
  • 8 Bolt< li>
  • Italian Narrow Bolt On< li>
  • For a New version of this sku use Item #: 166541< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 210459)
$360.01
Track Wheel, Mid Roller, Poly, Flat Face Stamped Steel, Remanufactured, RE254786 -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8410T, 8520T< li>
  • Replaces John Deere OEM number RE254786, R216084< li>
  • Outer Diameter: 14.5"< li>
  • Width: 4.5"< li>
  • Hub I.D.: 6"< li>
  • 8 Bolt< li>
  • For a New version of this sku use Item #: 166458< li> < UL> (Part No: 210460)
$326.01
Track Wheel, Mid Roller, Poly, Remanufactured, RE272331 -
  • For John Deere tractor models 8295RT, 8310RT, 8320RT, 8335RT, 8345RT, 8360RT, 8370RT, 9460RT, 9470RT, 9510RT, 9520RT, 9560RT, 9570RT< li>
  • Replaces John Deere OEM number RE272331< li>
  • Style: Wide (25-30)< li>
  • Outer Diameter: 17"< li>
  • Width: 9.5"< li>
  • Hub I.D.: 6"< li>
  • 8 Bolt< li> < UL> (Part No: 210464)
$610.01
Track Wheel, Mid Roller, Poly with cast hub, Remanufactured, RE165014 -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8410T, 8520T< li>
  • Replaces John Deere OEM number RE165014, R128980< li>
  • Narrow Style< li>
  • Outer Diameter: 14.5"< li>
  • Width: 5"< li>
  • Cast with 4 Holes< li>
  • For a New version of this sku use Item #: 166527< li> < UL> (Part No: 210457)
$360.01
Track Wheel, Mid Roller, Stamped Steel Narrow -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8410T, 8520T< li>
  • Replaces John Deere OEM number RE254786, R216084< li>
  • Outer Diameter: 14.5"< li>
  • Width: 4.5"< li>
  • Hub ID: 6"< li>
  • 8 Bolt< li>
  • For a Remanufactured version of this sku use Item #: 210460< li> < UL> (Part No: 166458)
$620.00
Track Wheel, Mid Roller, Wide, Bolt On, Remanufactured, RE254787 -
  • For John Deere tractor models 9300T, 9320T, 9400T, 9420T, 9520T, 9620T< li>
  • Replaces John Deere OEM number RE254787< li>
  • Outer Diameter: 14.5"< li>
  • Width: 8"< li>
  • Hub ID: 6"< li>
  • 8 Bolt< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 210473)
$475.01
Track Wheel, Stamped Steel, Poly, Remanufactured, RE251071 -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8295RT, 8300T, 8310RT, 8310T, 8320RT, 8320T, 8335RT, 8345RT, 8360RT, 8370RT, 8400T, 8410T, 8520T, 9300T, 9320T, 9400T, 9420T, 9430T, 9460RT, 9470RT, 9510RT, 9520RT, 9530T, 9560RT, 9570RT< li>
  • Replaces John Deere OEM number RE251071, RE576550< li>
  • Outer Diameter: 14.5"< li>
  • Width: 9"< li>
  • Hub I.D.: 6"< li>
  • 8 Bolt< li>
  • For a New version of this sku use Item #: 166478< li> < UL> (Part No: 210445)
$475.01
Universal Drive Shaft - Carraro -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5520, 5525< li>
  • Replaces John Deere OEM number RE61843< li>
  • Replaces Carraro manufacturer number 129077< li>
  • Double U-Joint< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154454)
$730.00
Universal Drive Shaft - Carraro -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125568< li>
  • Replaces Carraro OEM number 40894< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154562)
$455.00
Universal Drive Shaft - Carraro -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5520, 5525< li>
  • Replaces John Deere OEM number R125570< li>
  • Replaces Carraro OEM number 40905< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154568)
$226.00
Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Part No: 156129)		$34.76
Universal Joint With Shaft, Carraro - Right Hand -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303 (European), 5320, 5325, 5403 (European), 5420, 5425, 5520, 5525, 5615 (Turkish), 5715 (Turkish)< li>
  • Replaces John Deere OEM number RE212835< li>
  • Replaces Carraro manufacturer number 148106< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154701)
$780.00
Universal Joint Yoke, Carraro - Left Hand -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R212900< li>
  • Replaces Carraro manufacturer number 44152< li>
  • Fits Left Hand Side< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154559)
$490.00
Universal Joint Yoke, Carraro - Right Hand -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R212899< li>
  • Replaces Carraro manufacturer number 44151< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154558)
$470.00
Upper King Pins -
  • For John Deere tractor models 5065M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5105ML, 5203, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number R271394< li> < UL> (Part No: 156235)
$54.00
Upper Roller -
  • For John Deere Construction & industrial models 27D, 35D (s n 265712-earlier)< li>
  • Replaces John Deere OEM number 9237948< li> < UL> (Part No: 185700)
$154.42
Valve, Steering -
  • For John Deere tractor models 2350 (4WD less cab), 2355 (4WD less cab), 2550 (4WD less cab), 2555 (4WD less cab)< li>
  • Replaces John Deere OEM number AT79269, AT61099, AT74315, AL59898, AT101661< li>
  • Replaces manufacturer number 212-1003-001< li>
  • For a Remanufactured version of this sku use Item #: 207242< li> < UL> (Part No: 168208)
$710.00
Washer -
  • For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s n 765516-earlier), 3040 (s n 430000-later), 3055, 3140 (s n 430000-later), 3150, 3155, 3255< li>
  • Compatible with John Deere Harvester(s) 5720, 5730, 5820, 5830< li>
  • Compatible with John Deere Drill(s) 770< li>
  • Replaces John Deere OEM number T70321, W36278< li>
  • Washer for Reel Drive Hydraulic Motor< li> < UL> (Part No: 165397)
$89.00
Wheel Half Shaft Seal, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this seal measures 1.388 inches inside diameter, 2.055 inches outside diameter and is 0.588 inches wide. Replaces OEM numbers 81411C2, 83956841, 83961163, AL63351, AL68702, ZP07050110133. Used on John Deere 2155, 2350, 2355, 2550, 2555, 2855 (Part No: 124717)		$18.90
Wheel Half Sleeve, Keyed - 92 mm -
  • For John Deere tractor models 4430, 4440, 4520, 4620, 5010, 5020, 6030, 8430, 8630< li>
  • Replaces John Deere OEM number AR83354, R35303< li>
  • Keyed Half< li>
  • Includes Dowels< li> < UL> (Part No: 109094)
$148.00
Wheel Hub Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL1351 Mechanical Four Wheel Drive front ends. This part replaces, L35606, ZP1927576, 3216588R1, 81927576. Some of the models listed used more than one 4 wheel drive front end. Verify part number or axle number before ordering. Used on John Deere: 2040 serial number 350000 and up, 2150, 2240 serial number 350000 and up. (Part No: 124686)		$25.00
Wheel Hub Ring Gear -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125572< li>
  • Replaces Carraro manufacturer number 126891< li> < UL> (Part No: 154605)
$117.00
Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N serial number 430000 and up, 2550, 2555, 2650, 2855N (Part No: 124687)		$77.00
Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL345, APL350, APL1351, APL1551 Mechanical Four Wheel Drive front ends. This part replaces E2NN3B626CA, 87759380, 87772879, L40004, 81670C1, ZP4472353195, ZP4472353682. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255 (Part No: 156197)		$114.00
Wheel, Stamped Steel Wide 9" -
  • For John Deere tractor models 8100T, 8110T, 8120T, 8200T, 8210T, 8220T, 8300T, 8310T, 8320T, 8400T, 8420, 8520T< li>
  • Replaces John Deere OEM number RE251071, RE576550< li>
  • For a Remanufactured version of this sku use Item #: 210445< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 166478)
$411.00
ZF Steering Knuckle - Right Hand -
  • For John Deere tractor models 4050, 4250, 4450< li>
  • Replaces John Deere OEM number R83520< li>
  • Fits Right Hand Side< li> < UL> (Part No: 165134)
$918.00
 
Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: 183798)$15.60
Cable, Clutch Operating -
  • For John Deere tractor models 6110, 6200, 6200L, 6210, 6300, 6300L, 6310, 6310S, 6400, 6400L, 6410, 6410S, 6500, 6500L, 6510S, 6605< li>
  • Replaces John Deere OEM number AL117196, AL81309, AL79965, AL112642< li>
  • Length: 40.5469"< li> < UL> (Part No: 170525)
$72.69
Castle Nut - 1/2" -
  • For John Deere tractor models A (s n 647999-earlier), AO (s n 273079-earlier), AR (s n 273079-earlier), 50 (s n 5020400-later), 520, 530< li>
  • Replaces John Deere OEM number A335R, 14H994, AA4967R, B3279R< li>
  • 1 2" -20 NF< li> < UL> (Part No: 126122)
$2.30
Castle Nut - 9/16" -
  • For John Deere tractor models A (s n 648000-later), AO (s n 273080-later), AR (s n 273080-later), G, R, 60, 70, 80, 620, 630, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number R20228, 14H862, AD2850R, D2789R< li>
  • 9 16" - 18NF Grade 5< li> < UL> (Part No: 126123)
$1.99
Chain Binder - 1 4 inch chain binder, 2600 pound load limit. (Part No: 178272)		$26.26
Chain Binder - 3 8 inch chain binder, 5400 pound load limit. Use with either 5 16 inch or 3 8 inch chain. (Part No: 178290)		$33.00
Chain Binder - 1 2 inch chain binder, 9200 pound load limit. Use with either 3 8 inch or 1 2 inch chain. (Part No: 178266)		$48.50
Chain Binder - 1 2 inch chain binder, 9200 pound load limit. Use with either 3 8 inch or 1 2 inch chain. (Part No: 178266)		$48.50
Clutch Alignment Tool - 1-1/4" x10 and 1-3/4" x27 Spline, .670" Pilot -
  • For John Deere tractor model 2010< li>
  • Pilot Diameter: .670"< li>
  • 1st Spline: 1-1 4", 10 Spline< li>
  • 2nd Spline: 1-3 4", 27 Spline< li> < UL> (Part No: 176761)
$30.00
Clutch Alignment Tool - 1" x 15 and 1-1/2" x 23 Spline -
  • For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640, 2650, 2850< li>
  • Compatible with John Deere Construction & industrial models 401A, 401B, 401C< li>
  • 1st spline: 1" 15 spline< li>
  • 2nd spline: 1-1 2" 23 spline< li>
  • Pilot Diameter: .590"< li> < UL> (Part No: 156040)
$28.76
Clutch Bolt -
  • For John Deere tractor models 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4630, 8430, 8440, 8450, 8630, 8640, 8650< li>
  • Replaces John Deere OEM number R51230< li> < UL> (Part No: 165430)
$5.00
Clutch Cable -
  • For John Deere tractor models 5220, 5225, 5320, 5325, 5420, 5425, 5520, 5525, 5625< li>
  • Replaces John Deere OEM number RE283698< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 154362)
$51.00
Clutch Cable -
  • For John Deere tractor models 5303, 5403, 5425, 5503, 5525, 5625< li>
  • Replaces John Deere OEM number RE236983< li> < UL> (Part No: 154364)
$34.76
Clutch Cable -
  • For John Deere tractor models 5303, 5403, 5503< li>
  • Replaces John Deere OEM number RE272405< li> < UL> (Part No: 154656)
$34.76
Clutch Dog -
  • For John Deere tractor models B (s n200999-earlier), H, HNH, HWH< li>
  • Replaces John Deere OEM number B145R< li>
  • Forged like original< li>
  • 3 used per tractor< li>
  • Sold individually< li> < UL> (Part No: 126128)
$58.76
Clutch Dog -
  • For John Deere tractor models B (s n 2000000-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2351R< li> < UL> (Part No: 126129)
$42.99
Clutch Fork -
  • For John Deere tractor models 3010 (s n 016536-later), 3020 (s n 123000-later), 3020 (s n 201000-later), 4000 (s n 250000-earlier), 4010, 4020 (s n 250000-earlier)< li>
  • Compatible with John Deere Construction & industrial models 500A (s n 123114-152141), 500B, 500C, 600 (s n 201000-later)< li>
  • Replaces John Deere OEM number R41180< li> < UL> (Part No: 173858)
$110.00
Clutch Housing Gasket -
  • For John Deere tractor models 1020, 1520, 2030, 2240 (s n 350000-later)< li>
  • Compatible with John Deere Construction & industrial models 300 (Without Reverser), 300B (Without Reverser), 301, 301A, 302, 302A, 380, 400, 401, 401B, 401C, 401D, 480, 480A, 480B, 480C< li>
  • Replaces John Deere OEM number R99290, T21968< li> < UL> (Part No: 161809)
$15.30
Clutch Lever -
  • For John Deere tractor models 3010 (s n 067999-earlier), 3010 (s n 068000-later), 3020 (s n 067999-earlier), 3020 (s n 068000-later), 4000, 4010, 4020, 4320< li>
  • Replaces John Deere OEM number AR31906< li> < UL> (Part No: 176338)
$28.50
Clutch Levers Kit - Carraro -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number RE45881< li>
  • Replaces Carraro manufacturer number 350408< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154551)
$395.00
Clutch Levers Kit - Carraro -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number RE45880< li>
  • Replaces Carraro manufacturer number 350406< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154552)
$260.00
Clutch Pedal Bushing -
  • For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 920, 1020, 1030, 1120, 1130, 1520 (Less Reverser), 1530, 1630, 1641F, 1830, 2020 (Less Reverser), 2030, 2030 (Less Reverser), 2040 (s n 350000-later), 2150, 2240 (s n 350000-later), 2255, 2350, 2440, 2550, 2630 (Less Reverser), 2640 (Less Reverser), 2750, 2840< li>
  • Compatible with John Deere Construction & industrial models 210C (s n 745704-later), 300, 300B (Less Reverser), 301 (Less Reverser), 301A (Less Reverser), 302 (Less Reverser), 302A (Less Reverser), 310, 310A, 310B, 310C, 315C, 400 (Less Reverser), 401 (Less Reverser), 401C (Less Reverser), 410, 410B, 410C, 415B, 500C, 510, 510B, 510C, 515B, 610B, 610C, 710B, 710C< li>
  • Replaces John Deere OEM number T21998< li>
  • Outer Diameter: 1.063"< li>
  • Inner Diameter: 1.005"< li>
  • Length: 1.500"< li> < UL> (Part No: 163111)
$8.70
Clutch PTO Plate Return Spring -
  • For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 7020< li>
  • Compatible with John Deere Construction & industrial models 500, 500C, 600< li>
  • Replaces John Deere OEM number R26659, R48618< li>
  • Sold Each< li> < UL> (Part No: 114093)
$1.70
Clutch Release Sleeve -
  • For John Deere tractor models 5103 (Australia), 5103, 5203 (Australia), 5203 (s n: 002527-later, India), 5203, 5210, 5220, 5303 (Australia), 5303 (Mexico), 5303 (South Africa), 5303 (North Africa), 5303, 5303 (South America), 5310 (India), 5310, 5310S (India), 5320, 5320N, 5403 (Australia), 5403 (South Africa), 5403 (North Africa), 5403, 5410 (India), 5410, 5415, 5420, 5420N, 5503, 5510, 5520, 5520N, 5605, 5705, 5715< li>
  • Replaces John Deere OEM number R141075< li> < UL> (Part No: 176699)
$125.26
Clutch Setting Tool -
  • For John Deere tractor models 3010, 3020, 4010, 4020, 4320, 4520, 4620< li> < UL> (Part No: 163921)
$56.00
Clutch Slave Cylinder -
  • For John Deere tractor models 1640 (s n 430000-later), 2040 (s n 430000-later), 2140, 2350, 2550, 2750, 2940, 2950, 3040 (s n 430000-later), 3140 (s n 430000-later)< li>
  • Replaces John Deere OEM number AL34744< li> < UL> (Part No: 164476)
$101.00
Clutch Support Housing - Carraro -
  • For John Deere tractor models 5200, 5210, 5300, 5310, 5400, 5410, 5500, 5510< li>
  • Replaces John Deere OEM number R109446< li>
  • Replaces Carraro manufacturer number 350227< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154553)
$470.00
Clutch Valve Housing Gasket -
  • For John Deere tractor models 4030, 4040, 4040S, 4230, 4240, 4240S, 4350, 4430, 4440, 4630, 4640, 4840, 8430, 8440, 8450, 8630, 8640, 8650, 8850< li>
  • Replaces John Deere OEM number R99386, R59598< li> < UL> (Part No: 179542)
$2.90
Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: 182666)		$52.00
Grease Gun - Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: 182665)		$70.00
Grease Gun - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: 157100)		$20.00
Grease Gun - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: 178294)		$40.32
Grease Gun CLAMP - Clamp holds all 2-1 4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: 178308)		$9.80
Grease Gun PowerLuber 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)		$134.19
Grease Gun PowerLuber 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)		$288.95
Grease Gun PowerLuber 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)		$403.25
Grease Hose 18 Inch - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: 157114)		$7.86
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: 180261)$275.00
Inner Clutch Spring -
  • For John Deere tractor models 1010, 1020, 2020, 3010, 3020 (s n 122999-earlier), 4010, 4020 (s n 200999-earlier), 5010< li>
  • Compatible with John Deere Construction & industrial models 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 600< li>
  • Replaces John Deere OEM number R26638< li>
  • Sold Each< li> < UL> (Part No: 114092)
$1.60
Planetary Gear - Used on John Deere models: 2140, 2141, 2541, 2750, 2941, 2950, 2955, 3040, 304H, 3050, 3055, 3140, 3141, 3150, 3155, 324H, 3255, 3350, 3351, 344H, 3640, 3640S, 3641, 3650, 3651, 710B, 710C, 710D. This Gear has 34 teeth. Replaces 81688C1, 83985466, L39994, L41120, ZP4472353463, (Part No: 114883)		$116.00
Pressure Plate Springs (Pack of 15) -
  • For John Deere tractor models 3010, 3020, 4000, 4010, 4020, 4320< li>
  • Replaces John Deere OEM number R38185< li> < UL> (Part No: 164850)
$57.00
Pressure Plate Spring Washer -
  • For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840< li>
  • I.D. 0.572 < li>
  • O.D. 0.937< li>
  • Thickness 0.035< li>
  • Steel Spring< li> < UL> (Part No: 126159)
$3.56
PTO Clutch Lever -
  • For John Deere tractor models 3010, 3020, 4000 (s n 201000-later), 4010, 4020, 4320, 4520, 4620< li>
  • Compatible with John Deere Construction & industrial models 500, 600< li>
  • Replaces John Deere OEM number R33550, R2661< li> < UL> (Part No: 166994)
$19.80
Ring -
  • For John Deere tractor models 600, 1020, 1030, 1035, 1120, 1130, 1520, 1530, 1630, 1635, 1830, 2020, 2030, 2035, 2130, 2135, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 3135, 4000, 4020, 4040, 4230, 4240, 4440< li>
  • Compatible with John Deere Construction & industrial models 300, 301, 401, 410C, 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 510C, 540, 540A, 540B, 570, 570A, 570B, 600, 610B, 610C, 710B, 710C, 710D< li>
  • Replaces John Deere OEM number R26753< li> < UL> (Part No: 165737)
$0.10
Torsional Dampener -
  • For John Deere tractor models 830, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1750 (V), 1830, 1840, 1850, 1850 (V), 1950, 2020, 2030, 2040, 2120, 2240< li>
  • Replaces John Deere OEM number AL32964, AL19085< li>
  • With Independent PTO< li> < UL> (Part No: 187046)
$222.00
Traction Clutch Drive Shaft -
  • For John Deere tractor models 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7720, 7820, 7920< li>
  • Replaces John Deere OEM number RE220029, R220028, RE56451, R101179< li> < UL> (Part No: 164139)
$255.00
Traction Clutch Valve Housing Gasket -
  • For John Deere tractor models 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960< li>
  • Replaces John Deere OEM number R92467, R72960< li> < UL> (Part No: 179565)
$6.70
Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 185142)		$153.00
Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 179619)		$153.00
Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)		$110.33
Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 179618)		$197.00
 
Wheels
10” x 15" Front Rim - Yellow, new -
  • For John Deere tractor models 1020, 1520, 2030, 2440, 2630, 2640, 2750, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430< li>
  • Width: 10"< li>
  • Diameter: 15"< li>
  • Holes: 6< li>
  • Back Side: 5.500"< li> < UL> (Part No: 103761)
$202.00
10" x 16" Front Wheel Rim -
  • For John Deere tractor models 3050, 3350, 4050, 4240, 4250, 4430, 4440, 4450, 4520, 4560, 4620, 4630, 4640, 4760, 4840, 4960, 5010, 5020, 6030< li>
  • Compatible with John Deere Harvester(s) 9910, 9920< li>
  • Replaces John Deere OEM number JD3207, 99A900< li>
  • For 11" x 16" Tire< li>
  • 8 bolt pattern< li>
  • Offset: .50" negative< li>
  • Pilot hole: 6"< li> < UL> (Part No: 176565)
$152.30
10" x 34" Front Rim -
  • For John Deere tractor models 4560, 4760, 4960, 7200, 7210, 7220, 7230, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, 8520 (All With Front Wheel Assist Waffle Rims)< li>
  • Replaces John Deere OEM number RE156609, RE51656< li>
  • Width: 10"< li>
  • Diameter: 34"< li>
  • For a used versin of this item use 410428< li> < UL> (Part No: 110428)
$520.00
12" x 26" 6 Loop, Rear Rim -
  • For John Deere tractor models 1010, 1020, 2020, 2030< li>
  • Replaces John Deere OEM number AT17707, 313197, 31319729Z< li>
  • Width: 12"< li>
  • Diameter: 26"< li>
  • Type: 6 Loop< li>
  • Rim Color: Silver Mist< li>
  • Inside Diameter: 24 1 4"< li> < UL> (Part No: 103718)
$404.42
13" x 30", Front Rim, FWA Waffle Wheel -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4955, 4960, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8420, 8520< li>
  • Replaces John Deere OEM number RE156607, RE221864, RE49475< li>
  • Width: 13"< li>
  • Diameter: 30"< li>
  • Hole: 3 Per Tab 24 Total< li> < UL> (Part No: 110742)
$911.77
15" x 24" 6 Loop Rear Rim -
  • For John Deere tractor models 820 (3 cyl), 830 (3 cyl), 920, 1020, 1250, 1450, 1530, 1650, 1850N, 1950N, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2440, 2630, 2640, 4700, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5400N, 5410, 5420, 5420N, 5500N, 5510N, 5520, 5520N< li>
  • Compatible with John Deere Construction & industrial models 301, 301A, 302, 401, 401B, 401D< li>
  • Replaces John Deere OEM number AT20521< li>
  • Width: 15"< li>
  • Diameter: 24"< li>
  • Type: 6 Loop< li>
  • Can use Rim Bolt Kit 154252< li>
  • Rim Color: Silver Mist< li>
  • For 16.9" X 24" Or 17.5" X 24" Tires< li> < UL> (Part No: 110425)
$210.00
15" x 30", Front Rim, FWA Waffle Wheel -
  • For John Deere tractor models 4555, 4560, 4755, 4760, 4955, 4960, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8110, 8200, 8210, 8300, 8310, 8400, 8410, 8420, 8520< li>
  • Replaces John Deere OEM number RE49476, RE156608, RE67190< li>
  • Width: 15"< li>
  • Diameter: 30"< li>
  • Hole: 3 Per Tab 24 Total< li> < UL> (Part No: 110743)
$770.00
8" x 16" 6 Bolt, Front Rim -
  • For John Deere tractor models 2750, 2840, 2940, 2950, 4000, 4020, 4040, 4230, 4320, 4430< li>
  • Width: 8"< li>
  • Diameter: 16"< li>
  • Back Side: 4.63"< li>
  • Holes: 6 (6" center to center)< li>
  • Center hole is 4-5 8"< li>
  • 8x16< li> < UL> (Part No: 103762)
$120.00
8" x 16" 6 Bolt, Front Rim -
  • For John Deere tractor models 2750, 2840, 2940, 2950, 4000, 4020, 4040, 4230, 4320, 4430< li>
  • Replaces John Deere OEM number AL55753, AL82489< li>
  • Width: 8"< li>
  • Diameter: 16"< li>
  • Back Side: 3.875"< li>
  • Holes: 6< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 122656)
$143.10
Bearing Cone - For tractor models 50, 60, 70, A, BW, D, G. (Part No: 179949)$26.90
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Part No: 109633)$20.60
Bearing Cone - Outer bearing cone. For tractor models 50, 60, 70, 520 with 48-80 adjustable or 38 fixed thread~ 620, 630, 720 and 730 excluding roll-o-matic, 3010 and 3020 with 38 fixed thread, 4010 with 38 fixed thread. For 3010, 3020, 4010, 50, 520, 60 (Part No: 121347)		$45.76
Bearing Cone - Outer bearing cone. For tractor models 50, 60, 70, 520 with 48-80 adjustable or 38 fixed thread~ 620, 630, 720 and 730 excluding roll-o-matic, 3010 and 3020 with 38 fixed thread, 4010 with 38 fixed thread. For 620, 630, 70, 720, 730 (Part No: 121347)		$45.76
Bearing Cone - Outer bearing cone. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030. (Part No: 182598)$29.00
Bearing Cone - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 179943)		$53.70
Bearing Cone - Inner bearing cone. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030 (Part No: 173197)$25.20
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: 169912)$6.26
Bearing Cone - Outer bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Part No: 172510)$9.70
Bearing Cone - Outer bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 50, 60, 70, A, BW, D, G (Part No: 180091)		$27.00
Bearing Cone - Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: 179943)		$53.70
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: 173107)$14.70
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: 169912)$6.26
Bearing Cone - For tractor models 2030, 2840, 4030, 4230, 4430, 5010. (Part No: 118730)$11.00
Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: 173107)$14.70
Bearing Cup - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 179944)		$10.86
Bearing Cup - BEARING CUP For BO, BR, BW, D, G (Part No: 118705)$16.50
Bearing Cup - Outer bearing cup. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Part No: 180095)$6.00
Bearing Cup - Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: 121350)		$19.76
Bearing Cup - BEARING CUP For 50, B, BO, BR (Part No: 180095)$6.00
Bearing Cup - BEARING CUP For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH (Part No: 118705)$16.50
Bearing Cup, Inner - For tractor models A series excluding AN, BW, D, G series~ 50~ 60~ 70, 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 179944)		$10.86
Bearing Cup, Rear Wheel - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430, 5010. (Part No: 121349)		$7.50
Bushing Spindle -
  • For John Deere tractor models 1640, 1840, 2040, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2640 (straight, s n 341000-later), 2650, 2750, 2755 (all with Heavy Duty axle), 2840, 2850, 2940, 2950, 3040, 3130 (s n 186270-later), 3140, 3150, 3350 (all with Standard Duty axle)< li>
  • Compatible with John Deere Construction & industrial models 300, 300B, 301, 301A, 302, 302A, 310 (s n 237997-earlier), 400, 401, 480, 480A (s n 237997-earlier), 480B (s n 237997-earlier)< li>
  • Replaces John Deere OEM number T34546< li> < UL> (Part No: 152621)
$12.76
Clamp Lock Nut - 3 4-16 thread, fits front wheel on B, M, MT, 40, 420S, 420T, 1010 & 2010. For 1010, 2010, 40, 420S, 420T, B, M, MT (Part No: 111996)		$14.00
Clamp Lock Nut - 1-14 thread, fits front wheel on A, D, G, R, 50, 60, 70, 3010 & 4010. For 3010, 4010, 50, 60, 70, A, D, G, R (Part No: 111995)		$17.76
Closing Wheel - Closing wheel assembly, for 7000 Max-Emerge drawn planters and 7100 Max-Emerge integral planters. Assembly consists of: two(2) wheel halves, one(1) TP-A22325 tire, and one(1) TP-AA35741 bearing. For tractor models 7000, 7100. (Part No: 107832)$32.75
Complete Hub Assembly - Complete HUB Assembly. For tractor models 4, 6. (Part No: TWAHB20F)$55.74
Felt Seal - Front Wheel bearing Seal. For tractor models M serial number 43251 and up, MT, MI, 40 series. For 40, M, MI, MT, L, LA, (H - 2 used per side). Replaces AH562R, H203R, L106T (Part No: 184591)		$16.50
Front Axle Bushing -
  • For John Deere tractor models 5103, 5105, 5200, 5205, 5210, 5220, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5415, 5420, 5425, 5500, 5510, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R109456< li>
  • Replaces Carraro manufacturer number 126745< li> < UL> (Part No: 154485)
$10.86
Front Axle Bushing -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125549< li>
  • Replaces Carraro manufacturer number 128512< li> < UL> (Part No: 154490)
$29.26
Front Axle Bushing -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R126931< li>
  • Replaces Carraro manufacturer number 132971< li> < UL> (Part No: 154527)
$28.76
Front Axle Bushing Seal -
  • For John Deere tractor models 2440, 2640< li>
  • Replaces John Deere OEM number AH75408< li>
  • Inside Diameter: 2.00"< li>
  • Outside Diameter: 2.824"< li>
  • Bore: 2.804"< li>
  • Width: .2940"< li> < UL> (Part No: 176308)
$10.98
Front Axle Housing Bushing -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303 (Europe), 5303 (India tractor for Mexico), 5310, 5310S (India), 5325, 5403 (Europe), 5420, 5425, 5520, 5525, 5615 (Turkey), 5715 (Turkey)< li>
  • Replaces John Deere OEM number R217605< li>
  • Replaces Carraro manufacturer number 146108< li>
  • O.D.: 1.96"< li>
  • I.D.: 1.77"< li>
  • Width: 1.96"< li> < UL> (Part No: 154487)
$22.00
Front Axle Housing Bushing -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R195447< li>
  • Replaces Carraro manufacturer number 121311< li> < UL> (Part No: 154498)
$15.26
Front Axle Housing Bushing -
  • For John Deere tractor models 5103, 5105, 5203, 5205, 5225, 5303, 5310, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R217619< li>
  • Replaces Carraro manufacturer number 148234< li> < UL> (Part No: 154533)
$21.76
Front Axle Seal Ring -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number RE73064< li>
  • Replaces Carraro manufacturer number 138520< li> < UL> (Part No: 154672)
$57.00
Front Axle Support Bushing -
  • For John Deere tractor models 5105, 5200, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R113770< li>
  • Replaces Carraro manufacturer number 116529< li> < UL> (Part No: 154531)
$4.56
Front Axle Trunnion Bushing -
  • For John Deere tractor models 5105, 5205, 5220, 5320, 5420, 5520< li>
  • Replaces John Deere OEM number R140114< li>
  • Replaces Carraro manufacturer number 129641< li> < UL> (Part No: 154497)
$12.00
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces: JD1293, JD3039 (Part No: 103768)		$118.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. (Part No: 116854)		$65.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces AL82488, AL68277, JD3039 (Part No: 116854)		$65.00
Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. (Part No: 167680)		$217.00
Front Rim - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Additional $15 shipping due to size and weight. This additional charge will be added to your order. Replaces AR52506. For the following: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2250, 2355, 2355N, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 840, 940. (Part No: 103756)		$55.00
Front Rim 3 x 15 - 6 hole Front Wheel Rim. 4 9 16 inch pilot hole, 3 inch spacing on the 6 holes. Back spacing 3.25 inch. Verify back spacing before ordering. (Part No: 178388)		$132.00
Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $25 shipping due to weight. This additional charge will be added to your order. (Part No: 103764)		$93.00
Front Wheel Bearing Kit - Wheel bearing kit. Kit contains one each: 453X(Cup), 469(Cone), 2720(Cup), AR27806(Seal), R28574(Retainer), A1556R(Gasket). For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030. Repairs one wheel. (Part No: 102232)		$68.80
Front Wheel Bearing Kit - Wheel bearing kit. Contains one each: LM48510(Cup), LM48548(Cone), M12610(Cup), M12649(Cone), AR49592(Seal). For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830. Repairs one wheel. (Part No: 102228)$25.00
Front Wheel Bearing Kit - Wheel bearing kit. For tractor models 2030 serial number and up with heavy duty axle, 2840 with R49839 hub~ 4030 with adjustable axle and hub R49839 or R49841~ 4230 with adjustable axle and hub R49839 or R49841~ 4430 with adjustable axle and hub R49839 or R49. Repairs one wheel. (Part No: 102230)$48.40
Front Wheel Hub - 8 bolts on 8 inch bolt circle. Pilot 6 inches, 6.660 inch hub length, 4.592 inch inner bearing diameter, 3 inch outer bearing diameter. Uses 5 8 inch bolts. Includes Bearing Cups (not bearings). Uses Wheel Bearing Kit # WBKJD10 and Wheel Bolt # WB58. For tractor models 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030. Industrial models: 410, 415, 500, 510, 610, 700, 710, 2355. (Part No: 102239)$116.00
Front Wheel Hub - 6 Bolt -
  • For John Deere tractor models 2440, 2640< li>
  • Replaces John Deere OEM number R62436< li>
  • 6 Bolt Front Hub< li> < UL> (Part No: 104767)
$168.30
Front Wheel Hub - 6 Bolt - Economy -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5415, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number R109453< li>
  • For a Carraro version use Item #: 154458< li> < UL> (Part No: 160887)
$152.90
Hub Cap - This is a press in hub cap. It is used With R47076, T25809 and T21543 Front Wheel Hubs. Fits John Deere Models 820 (After Serial Number 042925), 830 (Non-Utility), 920 (After Serial Number 042925), 940, 1020 (After Serial Number 042925), 1030 (w Standard Front Axle), 1040, 1120 (After Serial Number 042925), 1130 (w Standard Front Axle), 1140, 1630 (w Standard Front Axle), 1640 (Low Type), 2020 (After Serial Number 042925), 2040 (After Serial Number 350000), 2120 (After Serial Number 042925), 2150 (Non-General Purpose), 2155, 2255, 2355N, 2240, 2350 (Low Type), 2355 (w Standard Front Axle), 2550 (Low Type), 2555 (w Standard Front Axle), 2755 (w Standard Front Axle), 2855N (w Standard Front Axle) Replaces N52048 (Part No: 100685)		$4.90
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial models 440, 440A< li>
  • Replaces John Deere OEM number AT38068< li>
  • Rod: 2-5 8"< li>
  • Bore: 3"< li> < UL> (Part No: 152881)
$23.26
Hydraulic Seal Kit - Steering Cylinder -
  • For John Deere Construction & industrial model 762< li>
  • Replaces John Deere OEM number RE18765< li> < UL> (Part No: 153356)
$27.50
Inner Bearing -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE46008< li>
  • Replaces Carraro manufacturer number 210373, 27427< li> < UL> (Part No: 154959)
$34.76
Lug Bolt - Verify size before ordering. Many tractors use more than one size. This Lug Bolt measures 5 8 inch by 18 thread. The overall lenght is 1.5 inches. The thread lenght is 1.38 inches. Replaces 98A561LB (Part No: 108604)		$4.06
Marker Hub Assembly - Hub assembly, 5 8 diameter mounting stud. Hub has two bolt hole circles for mounting to disc. 6 hole, 2-1 2 circle and 6 hole, 3 circle. Bolt holes are drilled for 1 4 bolts. Hub includes (6) 1 4 X 1 mounting bolts and self-locking nuts. For 7000 & For 7000, 8000 (Part No: HC12A)		$86.21
Oil Seal -
  • For John Deere tractor models 40, 320, 330, 420, 430
  • Replaces John Deere OEM number AM2684T, 2684D< li> < li>
  • Compatible with Massey Ferguson tractor models 35 (France), 35X (France), 135, 135 (UK), 165, 165 (UK), 175, 175 (UK), 178 (UK), 231, 231S, 240, 240 (S, Turkey), 240P, 241, 250, 251XE, 253, 263, 360, 451< li>
  • Compatible with Massey Ferguson Construction & industrial models 20D, 20E< li>
  • Replaces Massey Ferguson OEM number 897242M1< li>
  • O.D.: 2-3 4"< li>
  • I.D.: 1-7 8"< li>
  • Width: 3 8"< li> < UL> (Part No: 163776)
$2.90
Oil Seal -
  • For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5420, 5500, 5510, 5520< li>
  • Compatible with John Deere Construction & industrial models 210LE< li>
  • Replaces John Deere OEM number AT280866, R113984, ER047703< li>
  • I.D. 130mm< li>
  • O.D. 160mm< li>
  • Thickness: 14mm< li> < UL> (Part No: 168654)
$87.00
Outer Bearing -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303, 5310, 5320, 5325, 5400, 5403, 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE208806< li> < UL> (Part No: 154958)
$52.00
Press Wheel Tire - Tires for John Deere. 4-1 2x15Tru-Vee Opener press wheel tire. #7000 conversion drawn, drawn & folding drawn Max-Emer ge planters. #7100 integral, folding integral & soybean special integral Max-Emerge planters. No-tillage #1400, 70 & 71 Flexiplanters For 1400, 280, 300, 70, 7000, 71, 7100, MCI (Part No: 123903)$34.76
Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5 8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 19H1863. (Part No: 184824)		$24.95
Retainer - Front wheel Bearing Retainer. For tractor models M serial number 43251 and up, MT, MI, 40 series. For 40, M, MI, MT (Part No: 179686)		$30.26
Rim, 13 X 34, Waffle, Yellow -
  • For John Deere tractor models 7510, 7520, 7600, 7610, 7700, 7710, 7720, 7810, 7820, 7920, 8100, 8110, 8120, 8200, 8210, 8220, 8230, 8300, 8310, 8320, 8330, 8400, 8410, 8420, 8520< li>
  • 13" X 34" rim, waffle style< li>
  • Rim Diameter: 34"< li>
  • Rim Width: 13"< li>
  • Bolt Circle: 29-1 4"< li>
  • Number of Bolt Holes: 4 groups of 3< li>
  • Front side Measurement: 4-1 4"< li>
  • Back side measurement: 8-1 4"< li>
  • Bolt Hole Size: 11 16" square< li> < UL> (Part No: 167546)
$911.77
Roller Thrust Bearing -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5225, 5300, 5303 (European), 5310, 5320, 5325, 5400, 5403 (European), 5410, 5420, 5425, 5500, 5510, 5520, 5525, 5615 (Turkish), 5715 (Turkish)< li>
  • Replaces John Deere OEM number RE208806< li>
  • Replaces Carraro manufacturer number 27416< li> < UL> (Part No: 154728)
$40.00
Seal -
  • For John Deere tractor models 5103, 5200, 5203, 5210, 5220, 5300, 5303, 5310, 5320, 5400, 5403, 5410, 5420, 5500, 5510, 5520, 5615, 5715< li>
  • Replaces John Deere OEM number R109450< li>
  • Replaces Carraro manufacturer number 25315< li> < UL> (Part No: 154960)
$11.40
Seal Retainer -
  • For John Deere tractor models 2355, 2555, 2750, 2755, 4520, 4620, 4630, 4640, 4840, 5020, 6030< li>
  • Compatible with John Deere Combine(s) 3300< li>
  • Compatible with John Deere Harvester(s) 7450, 7460, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986< li>
  • Compatible with John Deere Construction & industrial models 410, 410B, 410C, 410D, 410E, 410G, 415B, 500, 500A, 500B, 500C, 510, 510B, 510C, 510D, 515B, 570, 570A, 570B, 600, 610B, 610C, 700A, 710B, 710C, 710D, 760, 760A< li>
  • Replaces John Deere OEM number R28574< li> < UL> (Part No: 176686)
$8.89
Spindle Bushing -
  • For John Deere tractor models 5103, 5105, 5200, 5203, 5205, 5210, 5220, 5300, 5303, 5310, 5320, 5400, 5403, 5410, 5415, 5420, 5425, 5500, 5510, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R109452< li>
  • Replaces Carraro manufacturer number 126625< li>
  • Replaces upper and lower bushings< li> < UL> (Part No: 154494)
$15.50
Spindle Dust Seal -
  • For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1750, 1850, 1950, 2020, 2150, 2240, 2255, 2350, 2355, 2355N, 2550, 2555, 2640, 2755, 3350< li>
  • Replaces John Deere OEM number M1518T< li> < UL> (Part No: 164011)
$3.90
Spindle Dust Shield -
  • For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320< li>
  • Compatible with John Deere Harvester(s) 9900< li>
  • Replaces John Deere OEM number B2693R, 4020KR< li>
  • Used with AR50962 and AR50963 knees< li> < UL> (Part No: 110385)
$11.26
Spindle Thrust Washer Seal -
  • For John Deere tractor models 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2750, 2755, 2850, 2855< li>
  • Replaces John Deere OEM number T15284< li> < UL> (Part No: 112421)
$4.66
Steering Arm & Drag Link Bushing -
  • For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1640, 1830, 1840, 2020, 2030, 2040, 2140, 2150, 2155, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3030, 3040, 3120, 3130, 3140< li>
  • Compatible with John Deere Combine(s) 2240< li>
  • Replaces John Deere OEM number T21445< li> < UL> (Part No: 121436)
$15.00
Steering Cylinder Bushing -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R140068< li>
  • Replaces Carraro manufacturer number 138759< li> < UL> (Part No: 154694)
$23.26
Steering Cylinder Bushing -
  • For John Deere tractor models 5105, 5205< li>
  • Replaces John Deere OEM number R206548< li>
  • Replaces Carraro manufacturer number 142393< li> < UL> (Part No: 154695)
$69.00
Steering Wheel Shaft Bushing -
  • For John Deere tractor models 530, 630, 730< li>
  • Replaces John Deere OEM number R20370R< li>
  • 1.00" Length< li>
  • 1.00" Outer Diameter< li>
  • 0.880" Inner Diameter< li>
  • 3 Bushings per tractor< li> < UL> (Part No: 126727)
$24.94
Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: F3583R, M2335T. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Part No: 155118)		$4.06
Swivel Housing Bushing -
  • For John Deere tractor models 5320, 5325, 5420, 5425, 5520, 5525< li>
  • Replaces John Deere OEM number R137146< li>
  • Replaces Carraro manufacturer number 128278< li> < UL> (Part No: 154530)
$5.86
TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: 184436)		$13.50
Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braided flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: 172349)$40.26
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 118299)		$14.30
Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. This additional charge will be added to your order. (Part No: 650X16)		$105.53
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: 118295)		$18.75
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: 178959)$51.00
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: 178957)$69.00
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: 158249)$63.25
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: 178895)$109.00
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: 184736)$69.88
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Part No: 183819)$79.42
Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: 1010, 1020, 1450, 1520, 1530, 1650, 2010, 2020, 2030, 2040, 2240, 2440, 420, 430, 435, 440 and others using 12 inches x 28 inches 4 rail spin out rims. Replaces: AL60764, AM3202T. Additional $25 due to weight. This additional charge will be added to your order. (Part No: 103722)$480.00
Wheel Bearing Kit - For A, B, D, G, 50, 520, 60, 620, 70, 720, 730, (AO, AR, GH, 530, 630, all with Factory Wide Fronts ONLY). Wheel Bearing Kit for 1 Wheel. Kit contains 1 each of the following p n 3383, 3320, 2785, 2720, D636R; which cross to the numbers JD7270, JD7224, JD7266, JD7216, D636R. (Part No: 102226)$113.00
Wheel Bearing Kit - For 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2040, 2120, 2150, 2155, 2240, 2250, 820, 830, 940, 2350 Lowprofile, (2344, 2555, 2755 all mid-hi axle), 2255 swept back. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p n LM48548 (Cone), LM48510(Cup), M12649(Cone), M12610(Cup), 23342(Seal has 2.361 I.D.). (Part No: 102227)		$22.00
Wheel Bearing Kit - For 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830, (2440 SN# up to 340999). Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p n LM48548(Cone), LM48510(Cup), M12649(Cone), M12610(Cup), AT10344(Seal has 1 075 I.D.). (Part No: 102228)		$25.00
Wheel Bearing Kit - For 2440, 2640. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p n LM501310(Cone), LM501349(Cup), LM67048(Cone), LM97010(Cup), AH75408(Seal). (Part No: 104759)		$22.60
Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p n 25577(Cone), 25521(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: 102229)		$41.00
Wheel Bearing Kit - For 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 300, 301A, 302A, 3040, 310B, 3140, 3230, 400, 401, 4030, 4230, 440, 480A, 480B, 62140, (3150, 3350 all standard duty), 300B 310A after SN# 237998, 2855 with swept back, 310 with SN# below 237997, 3130 with SN# above 186270. Wheel Bearing Kit for 1 wheel. Kit contains:25590(Cone), 25520(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: 102230)		$48.40
Wheel Bearing Kit - For 2955, 3055, 3255, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p n JLM10498(Cone), LM104912(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: 102231)		$39.59
Wheel Bearing Kit - For 5010. Wheel Bearing Kit for 1 wheel. Kit contains: M88048(Cone), M88010(Cup), 23342(Cone), R26632(Cup), 25590(Seal), 25521(Seal Retainer). (Part No: 104760)		$44.50
Wheel Bearing Kit - For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 9940, 9950, (4520, 4620, 5020, 6030 all with R63556 Hub, (2355, 2555, 2750, 2755 all GP models with extra heavy duty fixed axle. Kit contains 1 each of the following p n 469(Cone), 453X(Cup), 2794(Cone), 2720(Cup), 32453(Seal), R28574(Seal Retainer). (Part No: 102232)		$68.80
Wheel Bearing Kit - Fits front end For 1010 single row crop, 40 with SN# over 69404, (320, 330, 420, 430 all with standard axle). Wheel Bearing Kit for 1 wheel. Kit contains: 09067(Cone), 09195(Cup), 15123(Cone), 15245B(Cup), AM3094T(Seal). Replaces AM3094T, JD7438, JD7449, JD8134, JD8135 (Part No: 104761)		$17.40
Wheel Bolt - This wheel bolt fits the following John Deere tractor models using the R49839 and R47076 hubs: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 & below), 3130 (SN# 186270 & above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 & above), 401B, 401C, 4020 (SN# 201000 & above), 4030, 4040, 4230, and 4240. It has an overall length of 1 15 16 inches, a thread size of 9 16 inch 18 UNF, and thread length of 1 1 2 inches. Head size is 7 8. Replaces part numbers: AA4173R and AT11920. (Part No: 108605)		$1.90
Wheel Bolt - This wheel bolt fits the following Massey Ferguson tractor models using the R49839 and R47076 hubs: 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. It has an overall length of 1 15 16 inches, a thread size of 9 16 inch 18 UNF, and thread length of 1 1 2 inches. Head size is 7 8. Replaces part number: AA4173R and AT11920. (Part No: 108605)		$1.90
Wheel Front 8X16 - Front Rim with weight holes. 8 inch x 16 inch. 6 bolt, 6 inch circle, 4.62 inch pilot. Add $10 additional shipping due to size and weight. This additional charge will be added to your order. For the follwing models: 1520, 1640, 1840, 2040, 2040S, 2140, 2750, 2840, 2940, 2950, 3010, 3030, 3040, 3130, 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 6403, 7405, 7500. Replaces A-JD3210. (Part No: 180445)		$94.00
Wheel Half Sleeve, Keyed - 86 mm -
  • For John Deere tractor models 4040, 4050, 4240, 4250, 4430, 4440, 7020, 7520< li>
  • Replaces John Deere OEM number R52032, AR83355< li>
  • Keyed Half< li>
  • 86 MM< li>
  • Other Wheel Half use Item #: 498829< li> < UL> (Part No: 109649)
$175.00
Wheel Half Sleeve, Keyed - 86 MM -
  • For John Deere tractor models 4000 (Row Crop & Standard), 4020 (Row Crop & Standard), 4040, 4050 (s n 2875-later), 4230, 4240, 4250 (s n 3914-later), 4320, 4430, 4440, 4455 (Mexico), 7020, 7405 (With 18.4x38 Tires), 7520< li>
  • Replaces John Deere OEM number R33532< li>
  • Keyed Half< li>
  • 86 MM< li>
  • For use with Cast Rear Wheels R33450, R34680, R48954, R48955, R52160, R70309< li> < UL> (Part No: 109650)
$111.00
Wheel Hub - This wheel hub fits the following John Deere tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1520, and 1640. Replaces the part number T21545. Uses wheel bolt WB916 and hub cap A1555R. (Part No: 102234)		$61.00
Wheel Hub -
  • For John Deere tractor models 4055 (late s n), 4255 (late s n), 4455 (late s n), 7210, 7410, 7510, 7600, 7610, 7710, 7810< li>
  • Compatible with John Deere Harvester(s) 7200, 7400, 7800< li>
  • Replaces John Deere OEM number R112915< li>
  • 8 bolt hub< li> < UL> (Part No: 102241)
$113.40
Wheel Hub -
  • For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5203, 5204, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725< li>
  • Replaces John Deere OEM number RE271425< li> < UL> (Part No: 156220)
$560.00
Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. Uses wheel bearing kit WBKJD6 or WBKJD7 (depending on spindle), WB916 Bolts and hub cab A1555R. (Part No: 102237)		$42.00
Wheel Hub - 8 Bolt For 2355, 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030 (Part No: 102239)$116.00
Wheel Hub - 8 Bolt For 210C, 210LE, 2955, 300D, 3050, 3055, 310, 310A, 310B 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315CH, 315D, 315SE, 315SG, 3255, 3350, 401D, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 480C Forklift, 482C Forklift, 485E Forklift, 486E Forklift, 488E Forklift, 6010, 6020, 6100, 6100D, 6110, 6110D, 6110E, 6110L, 6115D, 6120, 6120L, 6130, 6140J, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6225, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6410S, 6415, 6415 Classic, 6420, 6420L, 6425, 6430, 6430 Premium, 6500, 6500 Sprayer, 6500L, 6505, 6510, 6510L, 6510S, 6515, 6520L, 6525, 6530, 6534, 6600 Sprayer, 6603, 6605, 6610, 6615, 6630, 6700 Sprayer, 6715, 7130, 7230, 7405, 7445, 7500, 9920 Cotton Picker, 9930 Cotton Picker, SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520 Replaces John Deere R49841 (Part No: 102240)		$79.00
Wheel Hub - 8 Bolt -
  • For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 6170R, 6190R, 7200R (s n 080000-earlier), 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R (s n 000101-053099), 8235R (s n 016001-090000), 8260R (s n 016001-090000), 8285R (s n 016001-090000), 8300, 8310R (s n 016001-090000), 8335R (s n 016001-090000), 8400< li>
  • Compatible with John Deere Harvester(s) 7450, 7455, 7460, 9935, 9965, 9970, 9976, 9986< li>
  • Compatible with John Deere Drill(s) 1890, 1900, 1910< li>
  • Replaces John Deere OEM number R113716< li>
  • 8 Bolt< li>
  • 9.252" Bolt Circle< li>
  • 5.998" Pilot Diameter< li>
  • 6.660" Hub Length< li>
  • 4.592" Inner Bearing Diameter< li>
  • 2.998" Outer Bearing Diameter< li> < UL> (Part No: 160886)
$288.80
Wheel Hub Bushing -
  • For John Deere tractor models 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number R125578< li>
  • Replaces Carraro manufacturer number 123294< li> < UL> (Part No: 154528)
$49.50
Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Part No: 102235)		$10.00
Wheel Hub - Carraro -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5520, 5525< li>
  • Replaces John Deere OEM number R125548< li>
  • Replaces Carraro manufacturer number 129952< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154459)
$218.00
Wheel Hub - Carraro -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5510, 5520, 5525, 8570, 8770, 8870, 8970< li>
  • Replaces John Deere OEM number RE61844< li>
  • Replaces Carraro manufacturer number 65957< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154463)
$405.00
Wheel Hub - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number R204864< li>
  • Replaces Carraro manufacturer number 146437< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154602)
$135.00
Wheel Hub - Carraro -
  • For John Deere tractor models 5105, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5420, 5425, 5520, 5525, 5615, 5715< li>
  • Replaces John Deere OEM number RE204872< li>
  • Replaces Carraro manufacturer number 68068, 63263< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154624)
$235.00
Wheel Hub Kit - Carraro -
  • For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5420, 5425, 5500, 5510, 5520, 5525< li>
  • Replaces John Deere OEM number RE73085< li>
  • Replaces Carraro manufacturer number 66757< li>
  • Manufactured by Carraro to exact OEM specifications< li> < UL> (Part No: 154457)
$390.00
Wheel Stud - Wheel stud measuring 1 2 x 1 1 2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A, For the following tractors: A, B, G, M, 50, 60, 70, 630, 730, MI, MT, 320, H, R, 40, 80, 330, 420, 430, 520, 530, 620, 720, 820, 830, 1010, 1020, 1520, 2010, 2020, 2030, 3010, BW, BWH (Part No: 111560)		$3.60
Wheel Stud - Wheel stud measuring 1 2 x 1 1 2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A (Part No: 111560)		$3.60
[an error occurred while processing this directive]