FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Tools, Accessories and Universal Parts Parts

[Categories]

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14

Engine Block Heater - Anti freeze drain plug hole heater. 3/4 inch-16 threaded plug. 400 watts. Install in bottom of head on any two cylinder John Deere tractor. Also Replaces 310-0093, 3100093, 839071M92, 839071M91, 773323M92, 773323M91, 3535158M91, 3535157M91, 194342M1, 191248M1, 839071M94, 764161, A2356483, A2356483, 11409, A5B360, and A5B360. (Item #: 111621, Ref: GE360) $49.80

Engine Block Heater - 1-3/4 inch frost plug type. 600 watts. Replaces C7NN8B152B, 310-0065, 3100065, K962705, A5B641, and A-5B641 (Item #: 120024, Ref: GE24) $40.90

Engine Block Heater - Frost plug engine heater. 1-1/4 inch diameter clamp and o-ring mounting. Fits most diesels. 600 watts. (Item #: 120029, Ref: 19841A91) $75.00

Loading Ramps - This pair of Loading Ramps are ideal for loading utility vehicles. Rated at 3600 pound total capacity. The loading panels on this ramp are 20 1/4 inches wide and are designed especially for the unique loading requirements of utility vehicles. Triple structure gives it the strength to handle the toughest jobs. (Item #: 180086, Ref: B1AC317) $708.00

No
Picture
Magnetic Block Heater - Universal Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250Â°F (121Â°C). Quick-grip handle protects hands from heat. 4-3/8" (11cm) length, 2-1/2" (6.3cm) width, 3" (7.5cm) height (including handle). (Item #: 107391, Ref: MBH1160) $110.00

Cooling System

$Tools, Accessories and Universal Parts Lower Radiator Hose Heater, 1-1\2 in$
Lower Radiator Hose Heater, 1-1/2 in - 600 watts.Fits many models. For 1-1/2 in I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Item #: 107387, Ref: GEH150) $70.54

$Tools, Accessories and Universal Parts Lower Radiator Hose Heater, 1-1\4in$
Lower Radiator Hose Heater, 1-1/4in - Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. Your hose needs to be 1 1/4 inches. 375 watts on 110-120 Volts AC. Cord it 42 inches in length. (Item #: 107386, Ref: GEH125) $68.00

$Tools, Accessories and Universal Parts Lower Radiator Hose Heater, 1-3\4$
Lower Radiator Hose Heater, 1-3/4 - 600 watts.Fits many models. For 1-3/4" I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Item #: 107388, Ref: GEH175) $52.00

Lower Radiator Hose Heater, 2 inch - 600 watts.Fits many models. For 2 in I.D. hose. Simple installation: Cut radiator hose per directions and insert heater. Thermostatically controlled. Please check dimensions before ordering. (Item #: 107389, Ref: GEH200) $75.80

No
Picture
Magnetic Heater, Universal - This magnetic block heater has a 8 square inch surface area. It is 120 volt, 60 hz, 200 watts. (Item #: S7098) $84.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

No
Picture
Alternator, Unicharge - Unicharge alternator, 80 amp. (Item #: 113329, Ref: ALT280SE) $160.00

Battery Cable - Standard battery ground strap. 7 inches. (Item #: 115790, Ref: D1NN14301H) $12.30

Battery Cable - 6 volt, 11 inches long. Standard battery connector with 7/16 inch connector on other side. (Item #: 115792, Ref: FAE14301B) $14.00

No
Picture
Battery Trickle Charger - 6 and 12 volt powerful 900mA multiple feature fully sealed charger employing state of the art electronics. Automatically senses the state of charge and adjusts charging rate. For use with 6 or 12 volt wet-cell lead acid batteries, fully sealed lead-acid batteries, gel-cell batteries, AGM and deep cycle batteries. Universal AC input 100-240 VAC, 50/60 Hz. Includes ring terminal adapter with fuse and alligator clips. Includes 12 ft. output cable lead. (Item #: B1TL1206) $59.92

Cable, Battery to Starter - 75 inches long-Gauge 1. Replaces OEM #AF1754R, AR20253. (Item #: 172339, Ref: AR88485) $66.00

Cable, Battery to Starter - 64 inches long-Gauge 1. Replaces OEM #AR20216 (Item #: 172328, Ref: AR26621) $44.10

Cable, Battery to Starter - 45 inches long- Gauge 1. Replaces OEM #AR35213. (Item #: 178288, Ref: AT13528) $38.00

Cable, Battery to Starter - 38 inches long. (Item #: 173136, Ref: AR28950) $31.00

Cable, Battery to Starter - 19 inches long. (Item #: AR51395) $17.30

Hourmeter - DC voltages from 12 volt to 36 volt nominal. Heavy duty glass reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three mounting screws with nuts and blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Key Switch - Fits .75 inch hole. For most models. Keyed Ignition Switch comes with 2 Keys. (Part No: 8N3679C) (Item #: 105687, Ref: 8N3679C) $7.80

No
Picture
Primary Wire 14 Gauge - 100 Ft Spool. (Item #: 178275, Ref: S.23316) $38.20

No
Picture
Primary Wire 16 Gauge - 100 Ft Spool. (Item #: 178276, Ref: S.23317) $27.40

Revolving Beacon - The 3 Magnetic pads adjust independently and are ideally suited to the contoured surface of the metal tractor cab roof. 7 inches high, 6/12 inches wide. NOTE: to be used on slow moving vehicles only! (Item #: S12337) $95.90

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion CJ8, Motorcraft A7NX. NOTE: Verify spark plug type before ordering. (Item #: 180216, Ref: AL255) $2.20

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid - This is a 12 volt solenoid widely used on Delco 30, 35 MT Series Starters. It Replaces Delco Numbers: 1115501, 1115508, 1115529, 1115537, 1115540, 1115582, 1119778, 1119833, 1119877, 1119882, 1119883, 1119885, 1119890, 1119906, 1119912, 1119935, 1119978, D953, D985 (Item #: 105672, Ref: 1115510) $30.00

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

No
Picture
Switch to Starter Cable - Red. 44 inch length. (Item #: 180383, Ref: 26A244) $31.20

Switch to Starter Cable - Switch to starter cable, 16 inches long. Replaces FAA14431B and 26A215. (Item #: 115783, Ref: 9N14431B) $10.00

$Tools, Accessories and Universal Parts Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - This 12 Volt Saddle Mount Voltage Regulator has 4 Terminals. (Item #: 105588, Ref: K7786D) $33.90

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

Engine Heater, Tank Type - 850 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 16-22 quart capacity liquid cooled engines. (Item #: 107375, Ref: GE850) $104.00

Engine Heater, Tank Type - 1000 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 23-30 quart capacity liquid cooled engines. (Item #: 107376, Ref: GE1000) $108.00

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $82.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $105.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $138.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $171.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $169.00

$Tools, Accessories and Universal Parts Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.10

No
Picture
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4" outside diameter Muffler Inlet (Item #: 108866, Ref: MC134) $4.80

$Tools, Accessories and Universal Parts Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$Tools, Accessories and Universal Parts Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $2.40

No
Picture
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.60

$Tools, Accessories and Universal Parts Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $7.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $13.20

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.90

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $10.30

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $8.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Gasket Set - This gasket set has a 5 inch gasket. It is used on one of the following Marvel Schebler carburetors. TSX181, TSX221, TSX245, TSX360, TSX374, TSX397, TSX414, TSX464, TSX466, TSX475, TSX505, TSX506, TSX506A, TSX530, TSX561, TSX562, TSX592, TSX596, TSX610, TSX615, TSX633, TSX641, TSX662, TSX678, TSX688, TSX689, TSX695, TSX704, TSX711, TSX713, TSX719, TSX721, TSX732, TSX737, TSX738, TSX756, TSX759, TSX768, TSX769, TSX772, TSX773, TSX775, TSX777, TSX784, TSX788, TSX791, TSX797, TSX798, TSX799, TSX806, TSX808, TSX810, TSX811, TSX813, TSX814, TSX819, TSX825, TSX843, TSX844, TSX848, TSX853, TSX856, TSX857, TSX869, TSX871, TSX877, TSX878, TSX884, TSX893, TSX899, TSX903, TSX904, TSX904SL, TSX905, TSX905-1, TSX907, TSX927, TSX928, TSX932, TSX932SL, TSX933, TSX934, TSX939, TSX940, TSX943, TSX944SL, TSX949, TSX949SL, TSX950, TSX952SL, TSX959, TSX963, TSX963-1, TSX966, TSX970, TSX972, TSX973, TSX974, TSX975, TSX977, TSX984SL, TSX985SL, TSX988, TSX989, TSX993, TSX994, TSX997, TSX998 (Item #: 182490, Ref: EAE9502) $6.50

Carburetor Kit, Basic - Used on Zenith: OS820, 10329, 10940, 11011, 11012, 11222, 11258, 11535, 11580, 11588, 11705, 11741, 11892, 11900, 11929, 11994, 11996, 11999, 12032, 12060, 12212, 12214, 12217, 12232, 12237, 12241, 12287, 12301, 12318, 12351, 12396, 12418, 12420, 12425, 12430, 12457, 12468, 12473, 12490, 12498, 12499, 12501, 12509, 12523, 12534, 12551, 12576, 12592, 12617, 12625, 12629, 12648, 12651, 12656, 12669, 12680, 12685, 12701, 12722, 12727, 12731, 12758, 12770, 12771, 12794, 12795, 12804, 12805, 12820, 12822, 12880, 12885, 12886, 12912, 12913, 12920, 12922, 12950, 12960, 12962, 12974, 12975, 12991, 12992, 12998, 13016, 13025, 13026, 13037, 13039, 13041, 13044, 13048, 13059, 13061, 13066, 13067, 13069, 13071, 13106, 13108, 13109. Replaces Zenith K2048, K2049, K2050, K2139, K2127 (Item #: 100741, Ref: Z104) $24.20

Carburetor Kit, Basic - Used on Zenith: 13111, 13112, 13113, 13114, 13115, 13116, 13117, 13119, 13120, 13121, 13122, 13123, 13124, 13125, 13128, 13129, 13147, 13150, 13151, 13152, 13153, 13154, 13157, 13160, 13161, 13163, 13164, 13165, 13170, 13178, 13186, 13198, 13202, 13212, 13213, 13226, 13236, 13294, 13304, 13316, 13328, 13337, 13338, 13348, 13357, 13358, 13359, 13373, 13383, 13384, 13390, 13406, 13419, 13433, 13434, 13435, 13462, 13465, 13467, 13488, 13489, 13534, 13538, 13545, 13546, 13560, 13572, 13588, 13597, 13604, 13608, 13609, 13610, 13612, 13624, 13636, 13677, 13689, 13716, 13752, 13770, 13771, 13783, 13823, 13831, 13844, 13876, 13881, 13893, 13919, 13939, 13956, 13960, 13961, 13978, 13980, 13981, 13985, 14028, 14991, 14992, 14995, 14996, 14998, 14999. Replaces Zenith K2048, K2049, K2050, K2139, K2127 (Item #: 100741, Ref: Z104) $24.20

Diesel Additive 32 OZ - StarTron Diesel Engine Additive 32 oz. Treats 1, 024 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Item #: 180211, Ref: STD32) $76.00

Diesel Additive 8 OZ - StarTron Diesel Engine Additive 8 oz. Treats 256 gallons per bottle. Fuel Treatment disperses bacteria without the use of poisons. Reduces all emissions, including carcinogenic and particulate smoke. Prevents fuel oxidation and stabilizes diesel chemistry for at least two years. The treatment lowers fuel system maintenance, and eliminates carbon build-up on injectors and exhaust components, increases fuel economy, cannot be overdosed, eliminates diesel soot. (Item #: 180210, Ref: STD8) $23.90

Fuel Filter, CAV type - This Filter Replaces the following part numbers: 70251397V, K960911, D2NN9176A, D8NN9N074AA, E1ADDN99126B, 3043645R91, 3044106R91, 3044506R91, 3044506R93, 3062788R91, 3069205R91, 306975R91, 3134477R92, 3144117R91, 3144477R91, 3602788R91, AT17387, AT17387T, TX10314, CAV7111296, 7111/296, 7111296, 1049939M91, 1077260M91, 1077260V91, 1851890M1, 3388840M2, 3388840M3, 3405 418M1, 3405418M1, 3405418M2, 3438731M91, 3713341M1, 3808606M1, 3901478M1, 3901478M2, 4303303M1, 836218M91, 842332M1, 65279, M03-36-03, 11406394, 1502155C91, 159044AS, 1909100, 2.4219.060.1, 2.4319.060.1, 20315106, 20-7100980, 218577A1, 26560017, 26561117, 32/400701, 6005007409, 601980, 602.390.0, 602390, 677850AS, 70000-14632, 7000037500, 70000-37500, 70251397, 70924187, 7111296, 7111-296, 72312061, 74954167, 836015106, 83937061, C1191A, EDPN9N074AA, F278201060040, FC25 10 00, L296F, V836362229, X825283248000. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $7.80

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304, 208362, 70208362, A11208, 12081G, NAA9160A, 13193D, L886T, 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60

Fuel Transfer Pump - (ACCESSORIES) Replaces FR1210C and 916-FR1210G. This industry standard DC pump dispenses up to 15 GPM (57 LPM). The FR1210G is ideal for pumping gas, diesel fuel and kerosene. With an amp draw that's easy on your DC power source. Explosion-proof UL/cUL listed 1/4 HP motor. The FR1210G comes complete with 12 foot static wire hose and manual nozzle. (Item #: 178261, Ref: FR1210C) $608.00

Fuel Transfer Pump, Piston Style (hand) - Fill-Rite Piston Hand Pump Series 5200 This compact, high flow, dual-action design delivers up to 20 GPM (76 LPM) per 100 strokes. Lightweight and portable, with a variety of options, these pumps meet a full range of applications. Ideal for gasoline, oil or a wide variety of approved liquids. Lightweight cast aluminum body, Stainless steel inner liner, Easy mount 2 inch tank adapter, Corrosion-Proof adjustable suction pipe, Pump flow can be reversed by rotating piston 180Â°, Steel yoke handle, All models UL listed, Anti-siphoning device, Pump may be padlocked. (Item #: 180630, Ref: FR152) $300.00

Fuel Transfer Pump, Piston Style (hand) - Fill-Rite Hand Lever Piston and Air Operated Pump Series 20. The economical way to transfer tough industrial fluids easily, safely and accurately. Perfect for barrels, storage tanks and drums, the FR20 Hand Lever Piston Pump transfers at approximately 11 fl. oz. (325ml) per stroke.Telescoping suction pipe for drums up to 36-1/2 (91.4cm) in depth, Body made from durable poly-propylene, Nitrile seals. (Item #: 180627, Ref: FR20) $144.00

Fuel Transfer Pump, Rotary Style (hand) - Fill-Rite Rotary Hand Pumps Series 100 Especially effective with medium viscosity liquids, as well as oils, gasoline and diesel fuels, the rotary action of these easy-to-use pumps allows smooth, continuous transfer at up to 10 GPM (38 LPM) per 100 revolutions. Lightweight cast aluminum body, Built-in check valve and strainer, Easy mount 2 inch tank adapter, Corrosion-Proof adjustable suction pipe, Anti-siphoning device, Pump may be padlocked, All Models UL Listed. (Item #: 180635, Ref: FR112) $316.00

Gasoline Additive 8 0Z - Star*Tron Gasoline Additive 8 oz. Treats 128 gallons per bottle. Cures and Prevents ethanol fuel problems.Increases fuel economy. MAkes engines start easier, run smoother, stabilizes fuel for up to two years. Eliminates carbon build up in fuel delivery system and on exhaust components. Cannot be overdosed, and rejuvenates fuel. (Item #: 179802, Ref: STG8) $17.50

Precleaner Assembly - For 4.00" dia. inlet tube, height 7.66", body diameter, 10.63". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Item #: 112380, Ref: H000858) $82.00

Precleaner Assembly - For 3.00" diameter, inlet tube, height 6.19", body dia. 7.34". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Item #: 179466, Ref: H001249) $75.00

Precleaner Assembly - For 2.50" dia. inlet tube, 6.19" hieght, body dia. 7.34". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Item #: 112378, Ref: H001251) $70.88

Precleaner Assembly - For 2.25" dia. inlet tube, height 6.19", body dia. 7.34". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Item #: 112377, Ref: H001250) $39.60

Precleaner Assembly - For 2" dia. inlet tube, height 4.75", body diameter 5.59". Mount on top of engine intake stack, centrifugal force in bowl seperates up to 75% of incoming dust before it enters the engine air intake system, durable, lightweight, non corrosive construction, full view plastic bowl lets operator easily see when service is needed, one bolt cover retention for service. When dirt reaches level of the arrow remove top nut and plastic body, then empty - no tools required. Mounting clamp included. (Item #: H002040) $48.95

No
Picture
Precleaner Assembly - 2.25 inch base. (Item #: 112377, Ref: ABC383) $39.60

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. Replaces 722841, 4016565, 74016565, D20604, 101579AS, 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A, 362998R91, 379660R91, 407076R91, AM3672T, AT16837, AT16838, 508372M91, 101579AS, 101579AS. (Item #: 186846, Ref: B9NN9A660A) $85.65

Gauges

Ammeter - Terminal type ammeter. 30-0-30. Chrome ring. 2 inch. (Item #: 121632, Ref: A0NN10670A) $7.10

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar - Standard Heat Treated Drawbar Blue, 30 1/2 inch L hole center to hole center, 2 1/2 inches wide, 1 inch thick (drawbar fits between lift arms). (Item #: 180232, Ref: 9N5182HTB) $63.00

Drawbar - Standard Drawbar - 1 inch x 2-1/2 inch x 26 inch, with 7/8 inch pins, (Category I). (Item #: 103174, Ref: 9N5182B) $44.30

Drawbar Blue - Extra H.D. Heat treated drawbar, 1-1/2" x 3" x 26", with Cat. II pins. (1-1/8"). (Item #: 103176, Ref: DKN5182) $58.00

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Item #: 184805, Ref: B1SB16) $37.05

$Tools, Accessories and Universal Parts Hitch Pin, 1\2 inch$
Hitch Pin, 1/2 inch - 3-5/8" usable length, 1/2" usable diameter, 9/64" hair pin hole dia. Heat treated. (Item #: 108614, Ref: 7811) $3.90

$Tools, Accessories and Universal Parts Hitch Pin, 7\8 inch$
Hitch Pin, 7/8 inch - 6-1/2" useable length, 7/8" useable diameter, 5/32" hair pin hole dia. Heat treated. (Item #: 108617, Ref: 7842PIN) $7.40

Top Link - Heavy duty top link, 1-1/4" NC threads. Forged ends with 1" sockets. 16" body, adjusts 23" to 32" overall. Dichrome Plated. (Item #: 161921, Ref: EC0N576AA) $31.70

Top Link - Top link, 16" body, 1". Category II ball joints. Forged ends with 1-1/8" NC threads. Swedge steel center section. Adjusts 21" to 33". Dichromate plated. Comparable to our JSA2000B and JSA2000R except body and ends are plated. Not available in colors. (Item #: 127119, Ref: TL162) $49.40

Top Link Assembly - Top Link Assembly, CAT I and II. Pin holes are 3/4 inch on one end, 1 inch on the other. Verify required length before ordering. This Top Link adjusts from 24 1/2 inches to 34 1/2 inches. (Item #: 102054, Ref: D0NN576B) $79.00

Top Link Blue - Top link, 24" body, . Category 1 ball joints (3/4"). Adjusts 29" to 39" overall. Painted blue. (Item #: 179953, Ref: JSA1024B) $34.45

Top Link Blue - Top link, 16" body. Combination Category II tractor and Catagory I implement ends. Adjusts 19-1/2" to 29-1/2". Painted blue. (Item #: 112122, Ref: JSA1200B) $22.98

No
Picture
Top Link Blue - Top links, 20 inch body, 1 inch. Category II ball joints. Adjusts 25" to 37". Painted blue. (Item #: 179975, Ref: JSA2020B) $64.54

No
Picture
Top Link Blue - Top link, 24" body, 1". Category II ball joints. Adjusts 29" to 41". Painted blue. (Item #: 179963, Ref: JSA2024B) $59.00

Top Link-Economy Forged - Category 1 application only! Forged, bright plated ends with 1-1/8 inch threads. 9 inch center body is one-piece with swedged ends. Easy to use lever type locking device. Convenient adjustment handle to body center. 9 inch body, 3/4 inch ball joints. Adjust 13 to 19 inch overall. Dichromate plated center body. (Item #: 103161, Ref: JSA1009) $27.90

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.70

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.60

Filter Element - 10 Micron replacement element for SF2-10. (Item #: 1A9251) $30.51

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 15 inch - Universal. 15 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: H42-2M-15) $41.50

Hydraulic Hose Assembly-NPT, 18 inch - Universal. 18 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 179905, Ref: H42-2M-18) $13.60

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.21

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Hose Sleeve - Comes in a 50 foot roll at $1.39 per foot. Nylon Hose Sleeve, black in color. Outside flat 1.88 inches. Nom I.D. 1.14 inches. Abrasion resistant fabric sleeve. Extends indivdual hose life. Excellent product for holding two or more hoses in a single bundle. (Item #: NHS114X600) $2.63

Universal Pressure Gauge, Hydraulic - 5000 PSI Gauge. Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. Serves as master gauge to check pump and valve output. Normal recommendation use gauge with twice the capacity of average hydraulic working pressure. (Item #: 178292, Ref: PMHG2) $8.98

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.00

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $11.13

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $11.13

Universal Pressure Gauge, Hydraulic - 200 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 182659, Ref: GG200) $12.30

Universal Pressure Gauge, Hydraulic - 2000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 182660, Ref: GG2000) $12.30

Universal Pressure Gauge, Hydraulic - 1500 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 182612, Ref: GG1500) $11.70

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.00

Implements

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $178.00

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $52.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $100.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.20

Lights

12 Volt Headlight - (Single) Headlight Assembly 12-volt, grey - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. (Item #: 180729, Ref: L525HG-12V) $24.10

Light Switch - Push / Pull Type Universal Light Switch. 2 Position, 2 Terminal. Threaded mounting on 1/2 inch stem 5/8 inches long. (Item #: 121149, Ref: 20A1716) $8.10

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

No
Picture
Rotating Beacon Warning Lights - Amber, Dual Bar, Bolt on. 12 Volt. (Item #: VLC2096) $217.58

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $14.70

Miscellaneous

Back Up Alarm - Mechanical alarm sounds when vehicle reverses. 8 inch alarm contains four hammers. Mounts on to wheel. Comes complete with universal mounting hardware. Complies with OSHA regulationsfor construction, industrial, and agricultural equipment. (Item #: 179538, Ref: CVA8) $246.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Ratchet Jack-Heavy Duty - Use in place of hydraulic cylinder on many implements. Welded steel body. 1-1/4 inch diameter. NC thread both ends. 1 inch diameter clevis pins. 10, 000 lbs. push and 15, 000 lbs. pull capacity. adjustable from 20 to 28 inches. (Item #: 103179, Ref: SL1541) $50.42

Slope Indicator - Accurate to less than plus or minus 1 degree. Oil in tube will not considerably change consistency from -40 to 170 degrees F. Dimensions are 3 inches x 6 1/2 inches. Includes brackets and mounting instructions. (Item #: SI7489) $62.28

Slope Indicator - Oil in tube will not considerably change consistency from minus 40 to 170 degrees F. Indicator is accurate to less than positive or minus 1 degree. Dimensions are 1-3/4 inches x 3-1/2 inches. Includes brackets and mounting instructions. (Item #: SI7490_) $55.33

Turnbuckle Implement Jack - For use on implements requiring infrequent or fine adjustment. Replaces standard hydraulic cylinders. 20 inch closed, 30 inch open, 1-1/4 inch thread size, 1 inch pin holes. Painted red. (Item #: 180688, Ref: SL153) $60.00

Video Borescope, 5.5mm Probe Diameter, 2.4 - Kit includes 2.4" TFT LCD Color Monitor, 5.5 mm Probe, operates 8 hours on 4 AA batteries (Batteries Included).Comes In A Durable, Black Carrying Case. Has Video Output to View On TV Monitor.Useful For Inspection and Observation In Areas Not Visible By Human Eye. (Item #: PVB2455) $511.18

Video Borescope, 7mm Probe Diameter, 2.5 - Kit includes 2.5" Color Monitor, 39" video cable, 7mm Diameter Lighted Probe, Comes In A Durable, Black Carrying Case. Insertion Tube Resistant To Water, Oil and Weak Acid.Operates Over 3 Hours With 3 AA Batteries (Batteries Are Included) .Useful For Inspection and Observation In Areas Not Visible By Human Eye. (Item #: VB25) $425.03

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $173.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Extension - I.D. 1.375 inch 21 spline female to O.D. 1.375 inch 21 spline male, Extends:4.125 inches, Length: 5.875 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 184829, Ref: PA10) $28.70

No
Picture
PTO Mounted Hydraulic Pump - For 1000 RPM 21 spline 1 3/8 Shaft. 23 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommednded hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 110043, Ref: HC-PTO-3A) $900.65

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $280.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.40

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.20

No
Picture
Paint, Universal Non Glare Black, 1 Gallon - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100255, Ref: TP120GAL) $60.00

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $43.90

Safety

SMV Sign, Metal - Slow moving vehicle safety sign, metal, center yellow / orange triangle visable by day. Safety red border glows in headlight beams at night. Meets all state requirements, ASAE and SAE standards. (Item #: 116916, Ref: 6A60) $23.40

Seats

Bucket Style Seat and Frame - Red Seat Cushion on a Black Frame. (Item #: 115872, Ref: BS100RD_) $170.00

Pan Seat - Pan Seat 19 inches wide, fixed with nine holes. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $52.00

Pan Seat - 19 inch wide Pan Seat - Flip over style. May come in a different color than in picture. (Item #: 101239, Ref: C5NN400AE) $60.00

Pan Seat, Steel, Padded - Padded steel pan seat. Two bolt mounting, 2 inch center to center. Three drain holes. Black leatherette upholstery. (TI) (Item #: 101377, Ref: TS1200) $42.40

Seat - Yellow leatherette upholstery, steel backed seat components (hardware not included).For tractor models 2510, 2520, 3010, 3020, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520. (Item #: 109348, Ref: JD5678) $286.00

Seat with Suspension - Replacement John Deere riding mower, comes with slide tracks. For Garden Tractors/Riding Mowers. Seat does have a provision for operator presence switch. Specific to John Deere GT225, GT235, GT235E (LATE), GT245, GX325, GX335, GX345, GX355, LX255, LX266, LX277, LX279, LX288, (325, 335 AND 345 Late), 355D. (Item #: 176317, Ref: AM131801_) $126.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $58.00

Tie-On Seat Cover - Red and White, 21 wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $37.70

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $52.00

Universal Seat - Seat assembly with seatbelt and headrest. Internal suspension, weight adjustable. Backrest tilt adjustment. Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. Slide track for forward/rear adjustment. Several mounting holes and slots in track and seat base are spaced from 9-1/2 inches to 13 inches apart side to side, and at various spacings from 4 inches to 11-5/8 inches front to back. For use on forklifts and construction equipment. (Item #: 180264, Ref: TS1035IND) $274.00

Universal Seat - Scissor suspension with four springs and one shock absorber. Completely adjustable for weight, height, and forward/rear position. Folding armrests are optional (TS1080ARS). Leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Item #: 180315, Ref: TS1080SAT) $225.00

Universal Seat - Leatherette - Specially designed for cab tractors. Headrest, armrests, and backrest with 5 degree tilt adjustment. Lumbar support. Weight and height adjustment, slide track. Scissor suspension with 4 springs and 1 shock absorber. Reinforced poly holders for spring attachment. Double peg stop on seat slide position lock. (Item #: 180242, Ref: TS1085CAB) $690.00

Universal Seat-High Back (Yellow) - Dimensions: W- 18 inches, H- 15 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3/4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Item #: LGS97HBY) $67.95

Universal Seat-Low Back (Black) - Dimensions: W- 18 inches, H- 10 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3/4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Item #: LGS97) $55.92

Universal Seat-Low Back (Yellow) - Dimensions: W-18 inches, H- 10 inches, D- 16 inches. Universal mounting hole pattern accommodates wide range of lawn and garden tractors. Heavy gauge steel base. Seat cushion has a 1-3/4 inch foam pad for total comfort. Suitable for use in all weather conditions. (Item #: LGS97Y) $55.92

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Toolbox - Metal, Approx Dimensions: width 11 inches, depth 4 inches, height 4 inches. Painted primer COLOR MAY VARY. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178901, Ref: 825633M91) $41.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

Belt Measurer - Measures 3/8, 1/2 and 5/8 fractional bels as well as A and B section industrial belts up to 110 inches. (Item #: 180515, Ref: B1SB9108) $81.00

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

Blade Grinder - Designed to be the most affordable blade grinder available. Features a totally enclosed standard-duty 1/2 HP motor which requires an arbor to mount the grinding wheel. â¢ 1, 725 RPM and has a specially designed reversing switch which allows you to grind both right and left hand blades to a fine hollow grind. Quick guard removal for easy wheel replacement. This grinder comes with an 8" x 1" x 5/8" ruby wheel. (Item #: B1SB1735) $665.97

Cylinder Hone - For bores from 1 1/2 to 3 inches. Easily adjusts. Length of 7 3/4 inches. Comes with stones. Call for replacement stones. (Item #: 179487, Ref: B1SB1704) $24.45

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S58474) $315.00

Heavy Duty Puller - 4 Inch - Three Jaw Puller. Drop-forged and manufactured with heat-treated screws and floating screw center Points. Adjustable and reversible. (Item #: 180010, Ref: B1SB9020) $94.00

Heavy Duty Puller - 8 Inch - Three Jaw Puller. Drop-forged and manufactured with heat-treated screws and floating screw center Points. Adjustable and reversible. (Item #: B1SB9022) $57.23

Hose Clamp Assortment - Total of 120 hose clamps from sizes 3/16 to 1 Inch. 20 each of 6 types/sizes. (Item #: 179946, Ref: B1SB7204) $77.00

O-Ring Assortment - Neoprene o-rings from sizes 1/8 x 1/4 to 3/4 x 1 inch. Total of 225 pieces in 11 sizes. (Item #: 180458, Ref: B1SB12) $75.00

Ratchet Tie Down - Pair (2) of 6 ft x 1 inch Pro Grip with hooks. Red. Capacity 1200 lbs. (Item #: 110485, Ref: B1312620) $55.00

Ratchet Tie Down - Heavy Duty 27 x 2 inch Pro Grip with hooks. Capacity 3300 lbs. (Item #: 110456, Ref: B1310001) $46.60

No
Picture
Saw Chain Grinder - Midi Jolly Grinder. This compact, quality-built machine has the features and controls to provide a precise grind with professional results. It will sharpen virtually any "round cutter" chain type and size, including 1/4, .325, 3/8 and .404 pitches. The vise angle guide is easily adjusted for cutter angles from 0 to 35. Features include an easy to operate cam-lever chain vise, cutter length adjustment, grind depth adjuster, on/off switch, and t ransparent safety guard. The brushless, single-phase 120v motor produces high torque at low rpm for long service life. Includes one grinding wheel for 1/4 to .325 pitch chains, wheel and chain pitch gauge, and a wheel dressin g brick. UL-approved. Arbor 4-1/8" x 7/8" Maximum RPM 5, 000 Weight 6 lbs. Dim D (4) 120V / 60hz / 85W / 35A (Item #: B1SB4249) $246.65

Spark Plug Thread Heli-Coil Repair Kit - Includes Heli-Coil Reamer/Tap; Heli-Coil Installation Tool; (6) 3/8 inch Reach Thread Repair Inserts; (6) .472 inch Reach Thread Repair Inserts; (6) 1/2 inch Reach Thread Repair Inserts; 12 3/4 inch Reach Thread Repair Inserts. The repair kit insersts are used to repair tapped holes which have been stripped or damaged due to sear, corrosion and over-torque. The are available in M12 and M14 sizes for any engine. (Item #: 182635, Ref: B1552314) $384.00

Spark Plug Thread Heli-Coil Repair Kit - Includes Heli-Coil Reamer/Tap; Heli-Coil Installation Tool; (12) 1/2 inch Reach Thread Repair Inserts; (12) 3/4 inch Reach Thread Repair Inserts. The repair kit insersts are used to repair tapped holes which have been stripped or damaged due to sear, corrosion and over-torque. The are available in M12 and M14 sizes for any engine. (Item #: 182674, Ref: B1552312) $522.00

Terminal Kit - Deluxe solderless terminal and connector assortment. 175 pieces. Includes female slip ons, oval butt connectors, ring connectors, male slip ons, spade terminals, and wire splice. (Item #: 183920, Ref: B1SB22) $54.28

Woodruff Key Assortment - Includes the following: 5 of #10 5/32" W x 7/8" L, 5 of #11 3/16" W x 7/8" L, 5 of #12 7/32" W x 7/8" L, 5 of #61 3/16" W x 5/8" L, 5 of #91 1/4" W x 3/4" L, 5 of #A 1/4" W x 7/8" L, 10 of #1 1/16" W``Total of 250 pieces. (Item #: 180626, Ref: B1SB6) $81.00

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces G57046, 3114166R91, K905277, K907805, G57046, K914312, 3114166R91, 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A, AL82488, AL68277, JD3039, 1678319M91, 1691618M92, 005281U91, 1678319M92, 1660769M91, 509893M91, 1660769M91, 1883333M92, 005281U91, 1077570M91, 1678319M91, 1678319M92, 1693421M92, 1691618M92, 7011529M91 (Item #: 116854, Ref: FW55166) $70.00

No
Picture
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Accessories / Supplies

Engine Block Heater - 1-3/4 inch frost plug type. 600 watts. Replaces C7NN8B152B, 310-0065, 3100065, K962705, A5B641, and A-5B641 (Item #: 120024, Ref: GE24) $40.90

Engine Block Heater - New 600 Watt Engine Block Frost Plug Heater has a forged brass body with a 1.5" diameter plug and positive locking assembly (Item #: 120025, Ref: D0NN8B152C) $37.20

Engine Block Heater - 1-5/8 inch diameter block type with o-ring seal. Fits most 6 cylinder models. 600 watts. (Item #: 120027, Ref: GE315) $41.60

Engine Block Heater - Frost plug engine heater. 1-1/4 inch diameter clamp and o-ring mounting. Fits most diesels. 600 watts. (Item #: 120029, Ref: 19841A91) $75.00

Cooling System

No
Picture
Magnetic Heater, Universal - This magnetic block heater has a 8 square inch surface area. It is 120 volt, 60 hz, 200 watts. (Item #: S7098) $84.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $13.80

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator, Unicharge - Unicharge alternator, 63 amp. (Item #: 178255, Ref: ALT263SE) $88.00