Brake Band - Sold individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 serial number less than 4000), (D17 serial number 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379)$32.00
Brake Band Hardware Kit - Compatible with Allis Chalmers Tractor(s) D17 (s/n 42001-Later), D19, D21, 170, 175, 180, 185, 190, 190XT, 200 (s/n 4000-earlier). Replaces Allis Chalmers OEM Number(s) 70235616, 70918448, 70235615, 70235614. Recommended 2 kits per side of tractor. Kit Contains: Inner Link, Outer Link, Pin, and Cotter Pin. (Item #: 1039432)$13.00
Brake Band Return Spring - For Allis Chalmers tractor models D17, 170, 175, 180, 185, Replaces Allis Chalmers OEM number 70250447, 70237220, 0.062" Wire Diameter, 0.510" O.D., 2.663" Overall Length, (Item #: 164314)$5.30
Brake Drum Assembly - For D17 serial number 42001 and up, 170, 175, 180, 185. Brake Drum Assembly with lining. Replaces 237418, 70237418, 70277325, 70277325SV (Item #: 105408, Ref: 70237418)$135.00
Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Non-Asbestos. Serial number 42001 and up, D17 Series IV. For tractor models 170, 175, 180, 185, D17. (Item #: 105399, Ref: 70237421)$42.00
Brake Plate Assembly, with Lining - 20 spline, 6.50 inch diameter. For tractor models 170, (D17 serial number 42001 and up). Also Replaces 70237208. (Item #: 105410, Ref: 70277327)$230.00
Brake Shoe Linings with Rivets - Set of 2 brake shoe linings with rivets for one wheel. For 170, 180, 185, 190, D17 after serial number 42000, D19, D21. (Item #: 105404, Ref: BLKAD17)$28.00
Brake Shoe Spring - Diameter of wire is 0.088 of an inch, outside diameter is 0.525-0.666 of an inch, and has an overall length of 1.389 inches. 4 used per tractor, sold individually. For the following models: D17 (serial number 42001 and up), D19, D21, 170, 175, 180, 185, 190, 190XT, 200 (up to serial number 4000). Replaces 235609, 250435, and 70250435. (Item #: 162368, Ref: G48508)$8.50
Universal Parts and Accessories Category: Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Item #: 151012, Ref: RIVET_TOOL)$41.00
Brake Rivet Tool, Large - Larger version of our Brake Rivet Tool. this has a 3 3/8 inch deep throat and is 2 1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brakes. (Item #: 151013, Ref: LGRIVET)$114.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
