FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers D10 Parts

Category: Engine Parts

[Categories] [All D10 Parts] [All Allis Chalmers Models]

1st Pinion Shaft Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 228296, 50 Teeth, (Item #: 111925) $160.00

Crankshaft - This new Crankshaft fits tractor models D10, D12, D14, D15 (Gas). Replaces: Casting number: 227550. Uses Main Bearings MBK-D10G and Rod Bearings CRK-D10G. Bearings not included. (Item #: 100027, Ref: 70240921) $742.00

Crankshaft Pulley - This new Crankshaft Pulley fits tractor models D10 (serial number 3501 and up), D12 (serial number 3001 and up), D15 (Gas), I60, Backhoe: I600, Forklift: I500. Replaces: 233396, 235043, Set Screw: 902870, 70233396, 70235043, Casting Number: AM4761. (Item #: 111720, Ref: 70235043) $85.00

Crankshaft Pulley - Fits (B, C, IB serviceable but does not have provisions for hand crank), CA, D10 (up to serial number 3500), D12 (up to serial number 3000), D14; Replaces: 236741, 70236741, AM4529. (Item #: 108008, Ref: 70236741) $67.00

No
Picture
Crankshaft, Reground - For tractor models D10, D12, D14, D15 all gas with casting number 227550. Additional $50 core charge will be added to your order. (Item #: 200006, Ref: R1197805) $490.01

Cylinder Head, Remanufactured, AM4859 - For Allis Chalmers tractor models D10, D12, D14, D15 (s/n 9000-earlier), Replaces Allis Chalmers Casting number AM4859, AM4367, AM5481, Not a Welded Head, Engine 149, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200029) $857.01

No
Picture
Cylinder Head, Used - For Allis Chalmers tractor models D10, D12, D14, D15 (s/n 9000-earlier), Replaces Allis Chalmers Casting number AM4367, AM4859, AM5481, Engine(s): 149, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200029, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400029) $365.01

Flywheel Ring Gear - This Flywheel Ring Gear has 93 teeth. It is used on Allis Chalmers D10 to serial number 3500, D12 to serial number 3000, and D14 to serial number 9000. Replaces part number 70233305 (Item #: 164571, Ref: 70233305) $94.00

Governor - For B serial number 123996 and up, IB serial number 2836 and up, CA, D10, D12, D14, D15 (all with a distributor, not for magneto type). Governor Assembly does not include housing. (Item #: 105367, Ref: 70225349) $171.00

Governor Gear Bushing - Mounted in front of the engine block, this Governor Gear Bushing measures: 1.881 inches outside diameter, 0.564 inches wide, and 1.752 inches inside diameter. It is used on Allis Chalmers B, C, CA, D10, D12, D14, D15, IB, RC, D272. Replaces 207466, 210689, 70210689 (Item #: 165362, Ref: 70210689) $25.50

Governor Rod Linkage Spring - Distributor or Magento Ignition, overall length 3-5/8 inch. For tractor models B, IB, C, CA, D10, D12, D14, D15, I40, I60, I600, RC. (Item #: 164570, Ref: 70212321) $25.00

Governor Shaft Bushing, Front - Measuring 0.437 inches inside diameter, 0.625 inches outside diameter, and 0.496 inches overall length, this bushing is used on Allis Chalmers: B, C, CA, D10, D12, D14, D15, IB, RC, D272. This part replaces Allis Chalmers part numbers 70207714, 207714 (Item #: 183461, Ref: 70207714) $15.90

No
Picture
Main Shaft Reverser Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70234028, Teeth: 19, (Item #: 107017) $144.00

No
Picture
Main Shaft, 2nd Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70234167, Teeth: 26, (Item #: 107019) $124.00

No
Picture
Main Shaft, 4th Gear - For Allis Chalmers tractor models D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70225414, Teeth: 49, (Item #: 107020) $133.00

Pushrod - Fits D10, D12, D14, D15 (with 138 CI, 149 CI, 160 CI gas/LP engines. Industrial: 500, 510, 512, 514, 521, 610, 612, 614, 615, 621, H3, I40, I400, I60, I600 (with 138 CI, 149 CI, 160 CI gas/LP engines) Replaces: 70227633, 227633 9.233 inches in length, 0.341 inches in diameter. (Item #: 178582, Ref: 70227633) $28.00

Ring Gear, Flywheel - Has 116 teeth, outside diameter 11.12 inches, inside diameter 10.86 inch. Fits D10 (serial number 3501>), D12 (serial number 3001>), D14 (serial number 19001>), D15 (Gas/LP). (Item #: 113677, Ref: 70233196) $44.10

Rocker Arm Support Stand - This new Cast Rocker Arm Support Stand fits D10, D12, D14, D15, with G138, G149 or G160 engines. Replaces OEM part numbers: 227627, 239791, 70227627, 70239791. (Item #: 126111, Ref: 70227627) $47.20

$Allis Chalmers D10 Valve Key, Intake and Exhaust, 1\2$
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. These Valve Keys are used in 125, 138 and 149 CID Gas Engines. Replaces 70206880. This is a package of 8. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Valve Rotator, Exhaust - Used on the following engines when equipped with Exhaust Valve Rotators: B116, B125, G138, G149, G160, W201, G201, G226, W226. Replaces OEM numbers 70224926V, 70224926, 224926. (Item #: 184379, Ref: 70224926) $32.70

Valve Spring - This valve spring is used on 125, 149, 201, 226 engines, on Allis Chalmers B, C, CA, D10 (series II), D12 (series II), D14, D15 (series II), D17, WC, WD, 170. Replaces 70206879, 206879 (Item #: 128606) $3.40

Valve Train Kit - For Allis Chalmers tractor models D10 (s/n 3500-earlier), D12 (s/n 3000-earlier), D14, D15 (Series I, s/n 9000-earlier), Compatible with Allis Chalmers Construction and industrial models H3 (s/n 6958-earlier), I40, I400, Compatible with Allis Chalmers Engine (s) 138, 149, Kit Includes: Intake and Exhaust Valves, Springs, Guides and Keepers, (Item #: 120229) $120.00

Valve Train Kit - For Allis Chalmers tractor models D10 (s/n 3501-later), D12 (s/n 3001-later), D15 (Series II, s/n 9001-later), Compatible with Allis Chalmers Construction and industrial models H3 (s/n 6959-later), I60, I600, Compatible with Allis Chalmers Engine (s) 160, (Item #: 120230) $173.00

Valve, Exhaust - For tractor models AC B, IB, C, CA, B15, B125, D10, D12, D14, D15 (4-Cylinder Gas). To order Valve Locks use part number 70206880. (Item #: 128610, Ref: 70228589) $12.80

Valve, Intake - Intake valve for AC B, IB, C, CA, B15, B125, D10, D12, D14, D15, (4-Cylinder Gas). To order Valve Locks use part number 70206880. (Item #: 128616, Ref: 70234829) $8.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories] [All D10 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy