FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers 220 Parts

Category: Gauges

[Categories] [All 220 Parts] [All Allis Chalmers Models]

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833) $30.00

No
Picture
Amp Meter Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180 (s/n 12799 - earlier), 185, 190, 190XT, 200, 210, 220, Replaces Allis Chalmers OEM number 70254407, 70240987, 60-0-60, Voltage: 12, Diameter: 2", (Item #: 173678) $16.60

Dash Light with 12V Bulb - Used on the following Allis Chamlers models: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Item #: 105311, Ref: 70234404) $33.87

Dash Warning Light - Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Item #: 182846, Ref: 240837) $26.90

Fuel Gauge - Just like the original, this fuel gauge is used on Allis Chamlers 190, 190XT, 200, 210, 220. Replaces 252368 (Item #: 190682, Ref: 70252368) $107.14

Oil Pressure Switch - Know if you lose oil pressure when it happens. This switch is used with 240837 Dash Warning Light. This switch is used on Allis Chalmers models: D21, 180, 185, 190, 190XT, 200, 210, 220, 4W305, 7000, 7030, 7040, 7050, 7060, 7080. Replaces Allis Chalmers part numbers 74020666, 74021445 (Item #: 162437, Ref: 74021445) $20.00

Proofmeter Drive Assembly - With Cover, 2 gears, 2 gaskets. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, D21 Has 12 and 45 teeth. Replaces original part numbers 246764, 70246764. (Item #: 128421, Ref: 720046764) $40.30

Tachometer Cable - Measuring 64.5 inches long with square ends. One end measures 5/8 with 18 threads, and one end measures 7/8 with 18 threads. For the following models: D21, 170, 175, 190, 190XT, 210, and 220. Used with 70252409 tachometer. Replaces 251791, 251792, and 256526, 70256526. (Item #: 167223, Ref: 70256526) $43.50

Tachometer Drive Gear and Shaft - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220, Replaces Allis Chalmers OEM number 70250487, 250487, (Item #: 154691) $17.50

Tachometer Gear and Shaft - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220, Replaces Allis Chalmers OEM number 250488, 70250488, (Item #: 154690) $14.98

Temperature Sensor - Water - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, Replaces Allis Chalmers OEM number 70241249, (Item #: 162434) $11.10

Water Temperature Gauge - For Allis Chalmers tractor models 175, 180, 185, 190, 190XT (s/n 2695-later), 200, 210, 220, Replaces Allis Chalmers OEM number 70240989, (Item #: 162431) $46.30

Universal Parts and Accessories
Category: Gauges

Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. (Item #: 182559, Ref: AMG60) $15.60

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Item #: 121625, Ref: UNI523) $32.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Item #: 178134, Ref: IHS626) $16.00

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Item #: 101927, Ref: SSW0002) $19.50

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Item #: 186993, Ref: 1042944) $27.20

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Item #: 178102, Ref: UTG50) $21.90

Temperature Gauge, Universal - Heat Indicator for 2 inch mounting hole. Complete assembly with bracket and adaptors. Numeric Face. 70 inch metal wrapped capillary line installs in block, head or hose. Dial calibrated to 250 degrees. Fits all liquid cooled engines. (Item #: 178124, Ref: UTG25) $20.30

Three Gauge Cluster - This universal set includes a Temperature Gauge, Amp Gauge and Oil Pressure Gauge in a chrome bezel. Gauges can be rotated in the bezel to mount a various angles. -60 to 60 Ammeter, 0 to 80 Oil Pressure, 100 to 220 Water Temperature (Item #: 134029) $30.90

Voltage Gauge - Reads 8-16 volts. Fits 2" diameter hole. Lighted. Two post mounting bracket. Black background. (Item #: 101928) $20.60

Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Item #: 178013, Ref: VOLT12LT) $45.50

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories] [All 220 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy