FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers D17 Parts

Category: Gauges

[Categories] [All D17 Parts] [All Allis Chalmers Models]

Ammeter - Ammeter for tractor models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Item #: 110403, Ref: 70254407) $20.90

Ammeter - 30-30 Style. White Face with AC Logo. For D14, D15, D17. OEM number 240987. (Item #: 100078, Ref: R4017) $27.00

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833) $30.00

Amp Meter - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70254407, (Item #: 162433) $10.00

No
Picture
Amp Meter Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180 (s/n 12799 - earlier), 185, 190, 190XT, 200, 210, 220, Replaces Allis Chalmers OEM number 70254407, 70240987, 60-0-60, Voltage: 12, Diameter: 2", (Item #: 173678) $16.60

Dash Light with 12V Bulb - Used on the following Allis Chamlers models: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Item #: 105311, Ref: 70234404) $33.87

Dash Warning Light - Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Item #: 182846, Ref: 240837) $26.90

Fuel Gauge - This new fuel gauge includes the gasket and the four (4) 1/4 inch-28 x 1/2 inch slotted cap screws. Fits tractor models D17 gas or diesel. Replaces: 229188, 70229188. (Item #: 155323, Ref: 70229188) $82.00

Instrument Panel Trim - New and Improved ~ 1/2 inch swirl, machine turned design on stainless steel. For tractor models (D15 serial number 9001 and up), (D17 serial number 32001 to 75000), D19. Replaces 234433, 70234433. (Item #: 179245, Ref: 234433) $86.00

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Item #: 102135, Ref: 70207834) $18.20

Oil Gauge - OIL GAUGE For D10, D12, D14, D15, D17``0-45 PSI (Item #: 103879, Ref: 70228718) $32.38

Oil Pressure Gauge - For Allis Chalmers tractor models D15, D17, D19, WD45, Replaces Allis Chalmers OEM number 70226967, 70200197, 70206959, 70232546, 0-80 PSI, Dash/Bracket Mounted, 1/8" NPT Thread, (Item #: 121646) $32.00

Oil Pressure Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, WD45 Replaces Allis Chalmers OEM number 70228719, , Compatible with Case tractor models C, D, L, R, S, V, 200B, 210B, 211B, 430 (8262799-earlier), 440 (8262799-earlier), 441 (8262799-earlier), Compatible with CockShutt / CO OP tractor models 20, 30, 40 (Blackhawk), 50 (Blackhawk), 550, 560, 570, Compatible with Ford tractor models 2N, 8N, 9N Replaces Ford OEM number 9N9273A, , Compatible with International tractor models I6, I9, M, OS6, Super M, Super MTA, Super W6, Super W9, TD6, TD9, W9, 350, 400, 450, 460, 560, 600, 650, 660, 3616, Compatible with Massey Ferguson tractor models F40, Super 90, TE20, TEA20, TO20, TO30, TO35, 35 (Blackhawk), 50 (Blackhawk), 65, 85, 88, 95, 97, 135, 150, 165, 202, 204, 2135, 2200, 2500, 3165, Compatible with Massey Harris tractor models Colt, Mustang, Pacer, Pony, 20, 22, 30, 33, 44 (Special), 50 (Blackhawk), 55, 81, 82, 101 (Jr), 102 (Jr), 201, 202, 203, 303, 333, 444, 555, Compatible with Minneapolis Moline tractor models BF, Big Mo, G, G550, G705, G706, G707, G708, G750, GB, GTA, GTB, GTC, GVI, Jet Star, Jet Star 2, Jet Star 3, JET STAR 3 SUPER, M5, M504, M602, M604, M670 (Super), M670 Super, R, RT, RTI, RTU, U, UB (Special), UDLX, UT, UTS (Special), Z, 4 Star, 5 Star, Compatible with Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 66, 70, 77, 80, 88, 90, 99, 440 (8262799-earlier), 660, 900, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1800, 1850, 1900, 1950, Chrome Bezel, No Logo, Black Face, White Letters, Dash Mounted, Includes Bracket and Studs (1/8" NPT), 0-50 PSI, (Item #: 150623) $15.20

Tachometer - With AC name on face. For tractor models D14, (D15 gas up to serial number 6630), D17 gas. Replaces 70261728, 70261779, 70228818, 70234095. (Item #: 103877, Ref: 70229755) $59.00

Tachometer - For model D17 diesel. Replaces 0230062-2, 70242374. (Item #: 121645, Ref: 70230062) $190.00

Tachometer Cable - 56 inch total length, threaded ends are 5/8-18 x 7/8-18, one Keyed and one Square end. For tractor models (D15 diesel), (D17 gas), (D21, 190, 190XT diesel with camshaft driven tachometer). Replaces 229751, 233639, 244107, 261607, 261609, 70229751, 70233639, 70244107, 70261607, 70261608. (Item #: 110181, Ref: AM3131T) $37.30

Tachometer Drive Adapter - For Allis Chalmers tractor models D10, D12, D14, D15, D17, Compatible with Allis Chalmers Construction and industrial models I40, I600, Replaces Allis Chalmers OEM number 70228768, Length: 1.561", Key Width: .095", O.D.: .302", (Item #: 121558) $19.98

Tachometer Drive Threaded Nipple - For Allis Chalmers tractor models D10, D12, D14, D15, D17, Compatible with Allis Chalmers Construction and industrial models I40, I600, Replaces Allis Chalmers OEM number 70228769, Threads Into Govenor Housing Or Block, 3/4" 20 Pipe Thread - 7/8" 18 Pipe Thread, Length: 1.413", Zinc Dichromate Steel, (Item #: 121557) $20.00

Temperature Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, WD45, Compatible with Case tractor models C, D, L, S, V, 200, 200B, 210B, 211B, 400, 410, 411, 412, 420, Compatible with Case Construction and industrial models 310, 420, Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40 (Blackhawk), 50 (Blackhawk), 550, 560, 570, Compatible with International tractor models C, Super C, TD5, TD6, TD9, 200, 230, 240, 300, 330, 340, 350, 400, 444, 450, 460, 560, 660, 2444, 3444, 3514, 3616, Compatible with John Deere tractor models A, B, D, G, H, M, R, 40 (Blackhawk), 50 (Blackhawk), 60, 70, 80, 320, 330, 420, 430, 520, 530, 620, 630, 720, 730, 820, 830, 840, Compatible with Massey Ferguson tractor models Super 90, TO35, 35 (Blackhawk), 40 (Blackhawk), 50 (Blackhawk), 65, 85, 88, 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40 (Blackhawk), 50 (Blackhawk), 60, 70, 80, 202, 203, 204, 205, 302, 304, 356, 406, 1001, 2135, 2200, 2500, 3165, Compatible with Massey Harris tractor models Colt, Mustang, Pacer, Pony, 20, 22, 30, 33, 44 (Special), 50 (Blackhawk), 55, 81, 82, 101 (Jr), 102 (Jr), 201, 202, 203, 303, 333, 444, 555 Replaces Massey Harris OEM number 21475A, , Compatible with Minneapolis Moline tractor models BG, Big Mo, G, GB, GTA, GTB, GTC, Jet Star, Jet Star 2, Jet Star 3, M5, M504, M602, M604, M670 (Super), M670 Super, R, RT, RTI, RTU, U, U302, UB (Special), UDLX, Z, 4 Star, Compatible with Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 66, 70, 77, 80, 88, 90, 99, 440, 660, 900, 950, 990, 995, Chrome Bezel, Dash Mounted, No Logo, 90 Degree Pointer Sweep, Capillary Tube: 72" Long, Heavy Duty, Thread: 5/8"-18 UF, Pipe Bushing: 1/2" NPT, 110-230 Degrees, (Item #: 150686) $37.14

Traction Booster Gauge - GAUGE with AC Name For D15 (From S#9001), D17 (From S#9001). OEM# 235598, 241727, 228977. Fully Functioning. (Item #: 103880, Ref: R4019) $107.00

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For tractor models CA, WD, WD45, (D10 up to serial number 9199), (D12 up to serial number 9167), D14, (D15 up to serial number 9000), (D17 up to serial number 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598, 70228977. (Item #: 103880, Ref: 70228977) $107.00

Water Temperature Gauge - This Water Temperature Gauge is used on Allis Chalmers D10, D12, D14, D15 Gas and Diesel, D17 Gas and Diesel, WD45 Diesel. It fits a 2 inch hole. The lead is 75 inches with a 5/8 inch18 U.F. end and a 1/2 inch NPT pipe bushing. It Replaces Original part numbers 226966, 228334, 229870, 231378, 235724, 70235724, 70231378. (Item #: 103878, Ref: R4014) $49.80

Universal Parts and Accessories
Category: Gauges

Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. (Item #: 182559, Ref: AMG60) $15.60

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $58.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $37.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Item #: 121625, Ref: UNI523) $32.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Item #: 178134, Ref: IHS626) $16.00

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Item #: 101927, Ref: SSW0002) $19.50

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Item #: 186993, Ref: 1042944) $27.20

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Item #: 178102, Ref: UTG50) $21.90

Temperature Gauge, Universal - Heat Indicator for 2 inch mounting hole. Complete assembly with bracket and adaptors. Numeric Face. 70 inch metal wrapped capillary line installs in block, head or hose. Dial calibrated to 250 degrees. Fits all liquid cooled engines. (Item #: 178124, Ref: UTG25) $20.30

Three Gauge Cluster - This universal set includes a Temperature Gauge, Amp Gauge and Oil Pressure Gauge in a chrome bezel. Gauges can be rotated in the bezel to mount a various angles. -60 to 60 Ammeter, 0 to 80 Oil Pressure, 100 to 220 Water Temperature (Item #: 134029) $30.90

Voltage Gauge - Reads 8-16 volts. Fits 2" diameter hole. Lighted. Two post mounting bracket. Black background. (Item #: 101928) $20.60

Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Item #: 178013, Ref: VOLT12LT) $45.50

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories] [All D17 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy