King Pin Thrust Bearing - Used on Carraro 4WD Axles, this King Pin Thrust Bearing (Trunion Bearing) replaces OEM numbers 5119699, 05119699, TX51785, OSA 206S, OSA206S (Item #: 156139, Ref: 5119699)$112.00
Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Item #: 164159, Ref: 70235120)$14.30
Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743)$13.40
Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762)$6.40
Spindle, RH/LH - This spindle measures A = 11.375 inch, B = 1.608 inch, C = 1.494 inch, D = 1.249 inch. Replaces 70263027. For tractor models 6060, 6070 with standard thread. This spindle uses wheel bearing kit part number WBKAC5. (Item #: 104273, Ref: 70272281)$360.00
Spindle, RH/LH - A = 12.00 inch, B = 1.607 inch, C = 1.625 inch, D = 1.188 inch. For tractor models (6060, 6070, with 96 inch thread), 6080. (Item #: 104274, Ref: 70263173)$262.00
Steering Arm - Left Hand, Used - For Allis Chalmers tractor models 6060, 6070, 6080, 7000, Replaces Allis Chalmers OEM number 70260289, Left Hand Steering Arm, For a new version of this item use Item #: 104299, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497153)$98.01
Steering Arm, LH - 6.750 inch hole center to hole center. For tractor models (170 serial number 7500 and up with roll shift front axle), (175 serial number 2035 and up with roll shift front axle), 6060, 6070. (Item #: 104295, Ref: 70256031)$150.00
Steering Arm, LH - For tractor models (6060, 6070 with 96 inch thread), (6080, 7000 with standard thread). (Item #: 104299, Ref: 70260289)$176.00
Steering Arm, RH - 6.750 inch hole center to hole center. For tractor models (170 serial number 7500 and up with roll shift front axle), (175 serial number 2035 and up with roll shift front axle), 6060, 6070. (Item #: 104296, Ref: 70256034)$151.00
Steering Arm, RH - For tractor models (6060, 6070 with 96 inch thread), (6080, 7000 with standard thread). (Item #: 104300, Ref: 70260291)$166.00
Steering Hand Pump, Used - For Allis Chalmers tractor models 170, 175, 6060, 6070, 6080, Replaces Allis Chalmers OEM nos 70261983, 70271315, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497356)$510.01
Steering Wheel - 16 inch diameter, 7 inch dish. Fits 36 Splined 7/8 inch shaft for tractor models: 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. Uses cap part number 70246722. (Item #: 113315, Ref: 70256852)$64.00
Steering Wheel Cap - Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Item #: 71362581)$31.13
No Picture
Steering Wheel Cap - Clear cap with the AC Allis Chamers logo. Fits steering wheel part number 70256852. For tractor models 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. (Item #: 104210, Ref: 70246722)$21.44
Steering Wheel Cap - For Allis Chalmers tractor models 180, 185, 190, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, Compatible with Cub Cadet Lawn and Garden (s) 100, 102, 122, Compatible with Gleaner Combine (s) A, E3, F, F2, F3, G, K, K2, L, L2, L3, M, M2, M3, N5, N6, N7, R40, R60, R70, Compatible with Massey Ferguson tractor models 3075, 3085, 3095, 3115, 3120, 3125, 3635, 3645, 3655, 5425, 5435, 5445, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, (Item #: 150717)$15.00
Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51)$7.60
Tapered Roller Bearing and Cup - For Allis Chalmers tractor models 5050, 6060, 6070, 6080 Replaces Allis Chalmers OEM number 71355915, 72090766, , Compatible with Oliver tractor models 1265, 1270, 1365, 1370 Replaces Oliver OEM number 24903470, , Compatible with White tractor models 2-50, 2-60, 700, Replaces White OEM number 31-2900283, Replaces Long OEM number TX51794, Replaces Massey Ferguson OEM number 3383324M1, I.D.: 70 mm, O.D.: 110 mm, Width: 25 mm, (Item #: 156179)$65.00
Tie Rod - Tie rod end, threaded, .813 inch diameter with 12 Right Hand threads per inch, and 3-3/4 inches to center of post. For tractor models 170, 175, 6060, 6070. (Item #: 100323, Ref: 70256151)$22.30
Tie Rod - 17.50 inches long, 1.125 inch diameter, 7 inch vertical holes. For tractor models 6060, 6070. (Item #: 104289, Ref: 70263033)$105.00
Tie Rod Tube - 16.75 inches long, 1.12 inch diameter. For tractor models 6060, 6070. (Item #: 104290, Ref: 70263034)$90.00
Universal Parts and Accessories Category: Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417)$49.00
Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275)$8.00
Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279)$10.10
Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278)$13.40
Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323)$16.10
Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277)$8.90
Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280)$8.00
No Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276)$9.60
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
