FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers D12 Parts

Category: Steering

[Categories] [All D12 Parts] [All Allis Chalmers Models]

Pinion Shaft Gear 2nd and 3rd - For Allis Chalmers tractor models CA, D10, D12, D14, D15, Replaces Allis Chalmers OEM number 70228291, 70225829, (Item #: 155082) $192.00

Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Item #: 164159, Ref: 70235120) $13.80

Seal, Power Steering Pump Driveshaft - For tractor models D10, D12, D14, D15, D17, WD, WD45. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743) $12.80

Spindle Bushing - This spindle bushing is used on spindle 70237073 in models CA, D10, D12. Replaces: 205601, 70205601. (Item #: 100617, Ref: 2N3109) $3.60

No
Picture
Spindle Bushing - For Allis Chalmers tractor models CA, D10, D12, Replaces Allis Chalmers OEM number 70205601, Inside Diameter: 1.2550", Outside Diameter: 1.3790", Width: 1.25", (Item #: 173329) $15.00

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762) $6.40

$Allis Chalmers D12 Spindle, LH\RH$
Spindle, LH/RH - A=13.44 inch, B=1.247 inch, C=1.190 inch, D=.750 inch. For tractor models D10, D12. Uses Wheel Bearing Kit part number 70228459. (Item #: 104602, Ref: 70237073) $255.00

$Allis Chalmers D12 Spindle, LH\RH$
Spindle, LH/RH - This spindle measures A=12 inch, B=1.610 inch, C=1.500 inch, D=1.187 inch. For tractor models D10, D12, D14, D15, D17 early serial number with 5 bolt wheel. Uses wheel bearing kit part number WBKAC1. (Item #: 100090, Ref: 70237434) $286.00

Spindle, Used - For Allis Chalmers tractor models D10, D12, D14, D15, D17 (early with 5-bolt wheel), Replaces Allis Chalmers OEM number 70237434, Right or Left Side, Dimension A: 12.000", Dimension B: 1.610", Dimension C: 1.500", Dimension D: 1.187", For a new version of this item use Item #: 100090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400090) $160.01

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Black Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. Also replaces 232033. (Item #: 101405, Ref: 70232033) $62.15

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2" Diameter, Splined Hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo Available as Part#R3996. Replaces 70233857, 70233851, 233851 (Item #: 101406, Ref: R3993) $60.00

Steering Wheel Center Logo - For D10, D12, D14, D15, D17, D19, D21. CHROME Steering Wheel Center Logo used on 70232033 and 70233851 steering wheels. Replaces 70228474, 70233852, 70246724 (Item #: 101407, Ref: R3996) $22.70

Steering Wheel Emblem Decal - 1-1/2 inches x 1-1/2 inches Black and Orange on White decal. Used as a steering wheel emblem on later model that did not use the metal emblem. (Item #: R5167) $3.50

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

No
Picture
Steering Wheel, Black - 17-1/2" diameter, splined, covered steel spokes. For tractor models D10, D12, D14, D15, D17, D19, D21. (Item #: 101405, Ref: 70232033V) $62.15

Steering Wheel, Cream - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. (Item #: 101406, Ref: 70233851) $60.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All D12 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy