FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 584 Parts

Category: Clutch

[Categories] [All 584 Parts] [All Farmall Models]

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-5/8 inch 10 spline, 3/4 inch pilot. For tractor models 364, 384, 385, 395, 494, 574, 584, 585, 595, 895, 995, 3230, 4210, 4220, 2400A, 2400B, (424, 2444 with single disc), 2500A, 2500B, 3500, 3500A. (Item #: 113942, Ref: S.70912) $22.80

Clutch Disc - 12 inch disc (6 large pads), 1-1/8 inch hub, 10 spline. For tractor models 895, 995, 3210, 3220, 3230, 3400, 3434, 4210, 4220, 4230, 4240, 584, 684, 784, 884. (Item #: 122009, Ref: 85026C3) $155.00

Clutch Disc - For Models: 2400, 2400A, 2400B, 248, 2500A, 2500B, 258, 268, 3400A, 3434A, 3434B, 3500, 3500A, 3514, 380B serial number below 18106, 4500A, 4500B, 3210, 3220, 3230, 3400, 485, 485L serial number below 8250, 485XL serial number below 703, 495, 574, 584, 674, 684 serial number below 10338, 685L serial number below 12349, 685XL serial number below 3234, 784 serial number below 9490, 785L serial number below 16712, 785XL serial number below 1840, 884 serial number below 9396, 885 serial number below 3083, 885L serial number below 2690, 885XL serial number below 2990 11 inch diameter, 1-1/8 inch hub, 10 spline, 6 ceramic pads. Replaces 1944253C1, 293248A1, 3121507R93, 70093C91. (Item #: 122012, Ref: 70093C91) $134.00

Clutch Kit - This new single clutch kit contains a 11 inch, 3 spring, 10 spline 1 5/8 inch hub pressure plate assembly (1500655C92), a 11 inch, 6 pad, 10 spline, 1 1/8 inch hub clutch disc (293248A1), release bearing (405625R91), pilot bearing (537290R91), and pilot tool. Tractors: 384, 454, 464, 484, 485, 574, 584, 585, 674, 684, 784, 884, 2400A, 2400B, 2500A, 2500B, 3500A.70716NC (Item #: 118400, Ref: S.61265) $247.00

Clutch Kit - This remanufactured single stage clutch kit contains a 12 inch, 10 spline, 1 5/8 inch hub, 12 spring remanufactured pressure plate assembly, a 12 inch 10 spline, 1 1/8 inch hub, 6 pad remanufactured clutch disc; new release bearing and new pilot bearing. For 1440, 1460, 1480, 1640, 1644, 1660, 1666, 1680, 1688, 900, 914, 915 (Item #: 202028, Ref: 85025K) $470.01

Clutch Kit - This New Clutch Kit, includes 537290R91 pilot bearing, 158125C91 release bearing, 85025C2 pressure plate-10 spline, 1 5/8 inch hub-12 inch diameter, 85026C3R clutch drive disc-10 spline with 1 1/8 inch hub and 10 spline-1 1/8 inch by 10 spline 1 5/8 inch pilot tool. Fits 3210 PATRIOT, 3220, 3230, 380B LOADER, 4210, 4220, 4230, 4240, 495, 584, 585, 595, 684, 685, 695, 784, 786, 795, 884, 885, 895, 985, 995. (Item #: 115343, Ref: 1712-7070) $410.00

No
Picture
Clutch Pressure Plate Assembly - New pressure plate assembly, 11 inch, 10 spline, 1-5/8 inch hub. For tractor models 454, 464, 484, 574, 584, 674, 684, 784, 884. (Item #: 150356, Ref: 70716C1) $97.00

Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $53.00

Clutch Release Fork - This Clutch Release Fork is used with 1970934C1 Clutch Bearing Carrier when used with a 12 inch clutch and 1971045C1 Clutch Bearing Carrier when used with an 11 inch clutch. Replaces 398342R2. (Item #: 111733, Ref: 398342R2) $79.00

PTO Clutch Kit - Clutch disc kit for single or dual speed independent PTO using 5 discs and 8 plates. Tractors: Hydro 84, 385, 395, 464, 484, 485, 495, 574 serial number 100001 and up, 84, 585, 595, 674, 684, 684, 685, 695, 784, 885, 2400A serial number 100001, 2500A serial number 100001 and up. For 2400A, 2500A, 385, 395, 464, 484, 485, 495, 574, 584, 585, 595, 634, 674, 685, 695, 784, 884, 885, HYDRO 84. Kit includes, 5 DISCS (401716R2), 8 PLATES (66188C1), 1 O-RING (401723R1), 1 O-RING (401724R1), 6 SPRINGS (66182C1). (Item #: 124694, Ref: 66193C91) $148.00

Pressure Plate Assembly, 11 Inch - 11 inch outside diameter, 3 spring-3 finger, 10 spline with 1 5/8 inch hub. Clutch plate for Gas and Diesel applications. 2400, 2400A, 2400B, 248, 2500A, 2500B, 258, 268, 3400A, 3434A, 3434B, 3500, 3500A, 3514, 380B serial number below 18106, 4500A, 4500B, 3210, 3220, 3230, 3400, 485, 485L serial number below 8250, 485XL serial number serial number below 10338, 685L serial number below 12349, 685XL serial number below 3234, 784 serial number below 9490, 785L serial number below 16712, 785XL serial number below 1840, 884 serial number below 9396, 885 serial number below 3083, 885L serial number below 2690, 885XL serial number below 2990. Replaces 1500655C91, 1500655C92, 1500655C93, 1500655R1, 2726336C91, 529566R92, 68211C91, 70716C1, 92602C92, 128005541, 70716. (Item #: 150356, Ref: 68211C91) $97.00

Pressure Plate Assembly, 12 Inch - This is a 12 inch, 10 spline with 1 5/8 inch center hub pressure plate. It is used on 3210 Patriot, 3220, 3230, 380B Indust/Const, 4210, 4220, 4230, 4240, 495, 584 Indust/Const, 595, 684, 685, 695, 784, 795, 884, 885, 895, 985, 995. Replaces 84342556, 85025C2, 85025C2R. (Item #: 110580, Ref: 85025C2) $209.00

Pressure Plate Assembly, 12 Inch - This is a Single Stage Rockford Style Pressure Plate Assembly. It has a 1-5/8 inch 10 spline center. It replaces 85025C91, 84342556. (Item #: 85025C91) $222.02

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All 584 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy