International Harvester / Farmall Super MTA Parts

[Categories]   [All Super MTA Parts]   [All Farmall Models]  

Bearing - Pilot - New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Item #: 100023, Ref: ST544) $5.40
No Picture Clutch Alignment Tool - 1-3/16 inch 11 spline, 1-3/4 inch 17 spline, .984 inch pilot. For tractor models Super MTA, 400, 450, 560. (Item #: 122049, Ref: S.70929) $23.90
Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $21.00
Clutch Bearing Seal Kit - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Contents: 1-832503 Release Bearing, 1-836205 Pilot Bearing, 2-360694 IPTO Seals, 1-285253 IPTO Bearing Cage O-Ring, (Item #: 108792) $92.00
Clutch Disc - 12 inch, 4 button, spring loaded, 1.1875 inch spline diameter, 11 spline. For tractor models 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 400, 450, 500, 560, 600, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Super MTA. (Item #: 112266, Ref: 384395R94) $154.00
Clutch Disc - 12 inch diameter, 1-3/16 inch hub, 11 spline. For tractor models Super MTA, Super W6, 400, 450, 560, 660. (Item #: 172291, Ref: 375564R91) $169.00
Clutch Disc - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688 (All Diesel), Replaces International OEM number 384395HD6, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Large Pads, (Item #: 112265) $139.00
Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2826, 2856, 3088, 3288, Clutch Diameter: 12", Clutch Hub Diameter: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Pad, Extra Thick, (Item #: 205991) $120.01
Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2826, 2856, 3088, 3288, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Carbotic Pads, (Item #: 205992) $153.01
Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2856, 3088, 3288, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads Thick On Flywheel Side, (Item #: 205993) $141.01
Clutch Disc, Remanufactured, 1251681C91 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, Replaces International OEM number 1251681C91, Clutch Size: 12", Clutch Hub; 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: Woven, For a New version of this sku use Item #: 130143, (Item #: 204186) $120.50
Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00
Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204187) $117.00
Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Lg Pads, (Item #: 204188) $142.50
Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 204189) $167.50
Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60
Clutch Pedal Return Spring - This Clutch Pedal Return Spring is 6 inches total length. It fits H, HV, M, MD, O6, ODS6, OS4, OS6, Super H, Super HV, (Super M, Super MD both up to serial number 60000), Super MTA, W4, W6, W6TA, WD6; Replaces: 49444DA. (Item #: 126155, Ref: 49444DA) $19.00
No Picture Clutch Release Bearing - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Compatible with Massey Ferguson tractor models 285, 1080, 1085, 1135, 1155, 1500, 1505, 1800, 1805, Replaces Massey Ferguson OEM number 834602M1, Inside Diameter: 2.500", Outside Diameter: 4.128", Width: 0.864", (Item #: 176789) $43.70
Clutch Release Bearing Carrier - This Release Bearing Carrier is used on Farmall M, MD, MDV, MV, Super M, Super MTA. Uses 6182379R91 Release Bearing (not included). (Item #: 172968, Ref: 6932D) $86.00
Clutch Release Bearing Carrier, Used - For International tractor models M, MD, MDV, MV, Super M, Super MTA, Replaces International OEM number 6932D, For a new version of this item use Item #: 172968, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460941) $46.01
Clutch Release Fork, Used - For International tractor models M, MD, Super M, Super MTA, 400, 450, 560, 660, Replaces International OEM nos 5800DB, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497006) $77.01
Clutch Release Sleeve Carrier - For model M, Super M, SUper MTA. (Item #: 109387, Ref: 6758D) $93.00
Pressure Plate - Pressure Plate, 12 inch, 12 spring, 3 levers adjust on pivot point, 1.750 inch spline diameter, 17 spline. Flywheel step, 1.406 inch. For tractor models 400, 450, 500, 560, 600, 660, Super MTA. Replaces: 359121R97, 359121R96, 359121R95, 359121R94, 359121R93, 359121R92, 359121R91, 360079R94, 360079R93, 360079R91, 359041R93, 360080R91. (Item #: 166108, Ref: 359121R98) $459.00
No Picture Pressure Plate - This pressure plate is 12 inches, 3 lever and 12 spring. For Models (M, MD, MDV, MV all after serial number FBK294707), Super M prior to serial number 60000, Super MD, Super MTA prior to serial number 60000, W9, Farmall 450. Replace part numbers 360079R and 360079RN. (Item #: 192515, Ref: 357299R95) $365.00
Pressure Plate Assembly, Remanufactured, 359041R93 - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, Replaces International OEM number 359041R93, 359121-R, 359121R91, 359121R92, 359121R93, 359121R94, 359121R95, 359121R96, 359121R97, 359121R98, 359121R98R, 359121-RN, 360079R91, 360079R93, 360079R94, 360080R91, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, (Item #: 204185) $137.50
Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50
Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01
Remanufactured Clutch Kit - Our remanufactured clutch kit contains: 12 inch, 17 spline, 1 3/4 inch hub, 12 spring, remanufactured pressure plate assembly; a 12 inch 11 spline 1 3/16 inch hub, remanufactured clutch disc with woven lining; new release and pilot bearings. There is also a $50.00 refundable core charge that will be added to your order. For tractors: Super MTA, 400, 450, 460. For 200, 230, HV, MTA, Super H, Super M. (Item #: 202006, Ref: 359121K) $309.00
T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $47.60
Universal Parts and Accessories Category: Clutch
Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01
Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01