FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 340 Parts

Category: Cooling System

[Categories] [All 340 Parts] [All Farmall Models]

Fan Belt - This Fan Belt measures 41-7/8 inches length and 0.4 inch width. For 140, 200, 230, 240, 330, 340. Please verify measurements before ordering (Item #: 172941, Ref: 367697R1) $9.00

Fan, 4 Blade - 16.00 inch outside diameter, 1.250 inch pilot hole, 1.937 inch center to center on bolt holes. For tractor models 200, 230, 240, (2404 with C-135 engine), (2444 Lo-Boy with C-153 engine), (330, 340, 404 all with C-135 engine), (444 with C-153 engine). (Item #: 163811, Ref: A173710) $81.00

Heater, Engine Block - This is a Frost Plug Heater with cord. It is 600 watts, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Power Cord is about one foot long. Replaces 407046R92. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D301. Tractors: 340, 460, 504, 560, 606, 656, 660, 706, 806, 2504, 2806. Combines: 315, 403, 503 Hillside, 503, 615, 715. (Item #: 120027, Ref: 106725A1) $41.60

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.60

Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.60

Radiator Cap Pressurized - For International / Farmall tractor models 100, 130, 140 (s/n 13967-earlier), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces International OEM number 393229R91, 362323R91, 370871R91, 2.050 radiator neck I.D.. Measure radiator neck before ordering, 7 PSI, (Item #: 112332) $6.98

$Farmall 340 Radiator Hose - Bulk 3 x 1-3\8 inch$
Radiator Hose - Bulk 3 x 1-3/8" - For International / Farmall tractor models H, OS4, Super H, Super W4, W4, 140, 200, 240, 274 (Diesel), 300, 340, 350, 404, 424 (Gas), 444, 2404, 2424 (Gas), 2444, Replaces Case IH OEM number 369092R2, 407002R1, 387721R1, I.D. (A): 1-3/8" (1.375"), O.D.: 1-3/4" (1.750"), Length: 3', For Hose Clamp use Item #: 130453, (Item #: 114083) $20.20

Radiator Hose Upper - Radiator hose, upper, for gas tractors. For model 340. (Item #: 116826, Ref: 369094R1) $35.50

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.90

No
Picture
Water Pump - For International / Farmall tractor models 200 (Farmall, 1/54-12/56), 230 (Farmall, 1/56-12/58), 240 (Farmall, 1/58-12/61), 330 (1/57-12/58), 340 (Farmall, Gas, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), Compatible with International Engine (s) C135 (LP and Gas), Replaces International OEM number 367683, (Item #: 165903) $133.00

Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $88.00

Water Pump - This water pump comes with hub and gasket for tractor models 140, (200, 230, IH 240 serial number 65001 and up with C123 engine), (330, 340, 404 with C135 engine), 2400, 2404, 2424, 2444, 4000, 444, all with C123 serial number 65001 and up, C135, C146 or 153 Gas engines. Replaces 367683R91, 375793R91, 367686R91, 367683R91. (Item #: 113376, Ref: 375793R92) $66.00

Water Pump By-Pass Hose - For International / Farmall tractor models 340 (Diesel), 460 (Gas), 504 (Diesel), 560, 606, 660, 706, 806 (all Gas), 2504 (Diesel), Replaces International OEM number 437575C3, 169192R1, 224563R1, 381547R1, 437575C2, 43757C1, ID: .590", OD: .926", Length 6.41", (Item #: 128128) $9.00

Water Pump Gasket - Used on 200, 230, 240, 2404 Indust/Const, 2424 Indust/Const, 2444 Indust/Const, 2504 Indust/Const, 330, 340, 404, 424, 444, 504. Replaces 367687R2 (Item #: 153405, Ref: 367687R2) $1.80

No
Picture
Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30

Water Pump Hub - Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $36.20

No
Picture
Water Pump Pulley, Used - For International tractor models 200 (s/n 65001-later), 230 (s/n 65001-later), 240 (s/n 65001-later), 330, 340, 404, 444, 504, Compatible with International Construction and industrial models 2404, 2444 (Lo-Boy), 2504, Replaces International OEM number 367688R1, Single Groove Pulley, For a new version of this item use Item #: 108755, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435414) $62.01

Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Universal Parts and Accessories
Category: Cooling System

Bar's Leaks - Radiator Stop Leak 11oz - Heavy Duty Stop Leak is versatile, working safely and effectively on plastic, aluminum and metal radiators, heater cores, gaskets and freeze plugs. (Item #: 159209, Ref: Z14012) $6.10

Dipstick Heater - Keep your engine warm and ready to start in cold conditions with the engine dipstick heater. The element on the heater is 23 inches and flexible. It fits most dipstick holes that are 1/4 or larger. The end must be submerged at least 4 inches in oil. 120 volts, 90 watts. Not for use in openings that have plastic parts. (Item #: 158652, Ref: 5B201) $37.00

$Farmall 340 Drain Tap (1\4 Inch X 18 NPT)$
Drain Tap (1/4 Inch X 18 NPT) - Fits many models. Please check dimensions before ordering. Fits many radiators and engine blocks.1KS517 (Item #: 110749, Ref: C9NN8115A) $3.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Cooling System

[Categories] [All 340 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy