FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 354 Parts

Category: Drive Train

[Categories] [All 354 Parts] [All Farmall Models]

Ball Bearing Assembly - The is an open, deep groove bearing. Used as a rear axle inner bearing on International 2120, 2130, 2140, 2150, 275, 276, 323, 354, B275. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043, 72092830 (Item #: 156046, Ref: C5NN7127B) $19.30

Bull Pinion Cage - This Pull Pinion Shaft Cage is right side. It is used on CASE-IH B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. Replaces 3064164R11, 3072916R11, 3071402R11 (Item #: 179381, Ref: 3071402R11) $161.00

Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $26.00

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90

$Farmall 354 Hi \ Low Range Shift Lever Seal$
Hi / Low Range Shift Lever Seal - This hi / low range shift lever seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444, 7000, B-275, B-276, B-414. Replaces: 132707R91, 23676D, 3069986R91, 353183R91, 353183R92, 353183R93, 381369R91, 385038R91, 721-3011, 751086R91, 751087R91, 921-3011, 471466 (Item #: 178140, Ref: A26778) $7.80

Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00

Rear Axle - This Rear Axle is used on IH B275, B414, 354, 364, 384, 3414. 8 Lug, 6 Inch Bolt Circle, 13 Spline. Replaces Original Part Number 3043997R12 (Item #: 180262, Ref: 3043997R12) $216.00

Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $29.00

Transmission Gear - Reverse Shaft and Gear for models: 2444, 354, 364, 384, 424, 444. Replaces International OEM nos 3071849R2, 3071849R1. Overall Length: 5.160", Out Side Diameter at Oil Grooves: .989", Out Side Diameter at Splines: 1.143", Out Side Diameter at Lower Shaft: 1.260", Out Side Diameter at Gear: 3.140", Splines: 26, Gear Teeth: 20 (Item #: 134303, Ref: 3071849R2) $72.00

Transmission Gear - Constant mesh gear for tractor models 276 354 and 2300. (Item #: 751058R2) $96.53

Transmission Gear Kit - Ring and Pinion for tractor models B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. (Item #: 3069966R91) $270.30

Universal Parts and Accessories
Category: Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $11.10

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories] [All 354 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy