International Harvester / Farmall Super MD Parts

[Categories]   [All Super MD Parts]   [All Farmall Models]  

Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $16.10
Bearing - Tractors, Implements. Ball bearing, has many applications including water pump bearing on tractors: M, MD, Super M, Super MD, W6, WD6, 06, ODS6, Super W6, Super WD6, W9, WD9, Super WD9, 400, W400, 450, W450. For 400, 450, 5088, 5288, 5488, M, MD, O6, ODS6, Super M, Super MD, Super W6, Super WD6, Super WD9, W400, W450, W6, W9, WD6, WD9. Replaces ST205A (Item #: 178129, Ref: E75GE9) $7.00
Bull Pinion Shaft Bearing Retainer Oil Seal - This bull pinion shaft bearing retainer oil seal has a 2.25 inch Inside Diameter, a 3.256 inch Outside Diameter and is .375 inch wide. There are two used per tractor. It Fits: 400, 450, 560, 660, MTA, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MVTA, Super W6, Super WD6, W400, W450, W6TA, M (SN: 294226 and up), MV (SN: 294226 and up), MD, MDV. Two needed per tractor. Replaces: 1699480C91, 200721H1, 3139744R1, 336626R91, 357037R91, 358896R91 (Item #: 163584, Ref: VT3755) $20.50
Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $26.00
Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to serial number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00
Universal Parts and Accessories Category: Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $11.10