FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 806 Parts

Category: Electrical System

[Categories] [All 806 Parts] [All Farmall Models]

Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $123.00

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator - 12 volt, 55 amp. For tractor models (105, 205 1968 to 1970 with 153 gas), (315 1968 to 1970 with BD-331), (403 1968 to 1970 with 301 diesel/263 gas), (503 1968 to 1969 with 282 gas/301 diesel), (615 1971 with 263 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720. (Item #: 113606, Ref: ADR0231) $123.00

Alternator Pulley - For International / Farmall tractor models 806, 856, 1026, 1256, 1456, Replaces International OEM number 384987R2, 1960481, 384987R1, Single Groove Pulley, 4.25" O.D., .67" Bore, (Item #: 123280) $148.00

Battery Tray - Left Hand - For International / Farmall tractor models 706, 806, 1206, Replaces International OEM number 380409R91, 403529R1, Fits left hand side, Restoration quality, Width: 4-1/4", For use with battery group 3EH, Comes primered (color may vary). Prior to painting check fitment, For Battery Tray - Right Hand use Item #: 104017, (Item #: 113443) $110.00

Battery Tray - Right Hand - For International / Farmall tractor models 706, 806, 1206, Replaces International OEM number 384491R91, 403530R1, Fits right hand side, Restoration quality, Width: 4-1/4", For use with battery group 3EH, Comes primered (color may vary). Prior to painting check fitment, For Battery Tray - Left Hand use Item #: 104016, (Item #: 113442) $103.00

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Tractors: 656, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, Hydro 100, Hydro 186. Combine: 715, 815, 915, 1420, 1440, 1460, 1470, 1480. Windrower: 4000, 5000, 5500, 8830. Replaces 539053R3, 539053R2, 539053R1, 1987442C1, 1987399C3, 175577C2, 175577C1. (Item #: 108656, Ref: 72162089) $74.00

Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.10

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.80

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Distributor, Remanufactured, 368051R - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Replaces International OEM number 368051R, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, (Item #: 203534) $265.01

No
Picture
Generator - Delco Style (9446), Remanufactured, Delco Remy, 1102337 - For International / Farmall tractor models 806, 2806 (both diesel), Replaces Delco Remy manufacturer number 1102337, Replaces manufacturer number 9446, 340-99, 92-01-3110, Delco Style, Voltage: 12, Rotation: Clockwise, Amperage: 35, Regulator: External, (Item #: 203519) $389.03

Generator, Delco Type, 12 Volt - For tractor models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco numbers 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426, 1100424. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30

Point Set - For International / Farmall tractor models 504, 606, 660, 706, 806, 2504, 2606, 2706, 2806, Replaces International OEM number 372951R91, 21A163, 1962 and later, For distributor with a gap of .020", (Item #: 111107) $16.60

Pulley - This Pulley measures: 1.480 Inches Wide, 4.220 Inch Outside Diameter, 0.670 Inch Shaft Diameter. It is used with 16mm (5/8 inch) Belts. Replaces 384645R1, 24-1105, ADR5022 (Item #: 121930, Ref: 384645R1) $31.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter - This is a new starter for (766 with 360 Diesel 1963 to 1968), (806 with 361 Diesel 1963 to 1968), (856 with 407 Diesel 1968 to 1970), (966 with 414 Diesel, 1066 with DT414 Diesel, 1971 to 1978), (1206 with DT361 Diesel, 1967 to 1968), (1256 with DT407 Diesel 1967 to 1969), (1456 with 407 Diesel 1970), (1466 with DT436 Diesel 1468 with DV550 Diesel, 1566 with DT436 Diesel, 1971 to 1974), (1568 with DV550 Diesel, 1973 to 1974), (2856 with 407 Diesel, 1968 to 1970), (815 Combines with 407 and 414 Diesel 1970 to 1974). 12 volt. Replaces 102263A1, 107365C91, 1113489, 1113647, 1113684, 130985C91, 1990322, 381035R91, 381035R92. (Item #: 160357, Ref: 1113647) $761.00

Starter - Delco Style (4235), Remanufactured, Delco Remy, 1108334 - For International / Farmall tractor models 706, 756, 766, 806, 856, 2756, 2806, 2856 (all gas), Replaces Delco Remy manufacturer number 1108334, 1109359, Replaces manufacturer number 140-746B, 4235, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For Starter Drive use Item #: 110771, (Item #: 203451) $484.80

No
Picture
Starter - Delco Style (4325), Remanufactured, A481102Z, Delco Remy, 1107275 - For International / Farmall tractor models 706, 806, 2806, Replaces Case OEM number A481102Z, Replaces Delco Remy manufacturer number 1107275, 323-638, Replaces manufacturer number 4325, 140-749, 91-01-3993, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 9, (Item #: 203462) $331.79

No
Picture
Starter - Delco Style DD (3952), Remanufactured, Delco Remy, 1113642, 381035R92 - For International / Farmall tractor models 766, 806, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2806, 2826, 2856 (all diesel), Compatible with International Combine (s) 815, 915, Replaces International OEM number 381035R92, 102263A1, Replaces Delco Remy manufacturer number 1113642, 1113647, Replaces manufacturer number 91-01-3985, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, Mounting Type: Flange, Mounting Holes: 3, For a New version of this sku use Item #: 160357, (Item #: 203147) $463.50

Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Item #: 117546, Ref: 1651487C1) $33.90

Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $33.90

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.20

Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.20

Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.20

Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $35.80

Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70

Voltage Regulator, 12 Volt - Regulator, 12 volt, for tractors with alternators. Models: 664, 706, 806, 826, 1206, 2706, 2806, 21206. For 1206, 21206, 2706, 2806, 664, 706, 806 (Item #: 105289, Ref: 1119515) $21.10

Voltage Regulator, 12 Volt - Flat Mount Voltage Regulator. For tractor models 2404, 2424, 2504, 2606, 2656, 2706, 2806, 404, 424, 504, 606, 656, 706, 806. Replaces Delco 1119000, 35A5137 1118897, 121579C1, 375055R1. (Item #: 105521, Ref: 121579C1) $94.00

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $49.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.60

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.00

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $40.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $34.70

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $16.60

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $15.10

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $24.60

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $37.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $16.20

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.10

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $18.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $70.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $38.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $69.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $79.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $31.98

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $83.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $22.90

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $73.00

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.40

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $18.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $19.70

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $20.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $30.80

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $20.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.60

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.40

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $15.10

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $56.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

$Farmall 806 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All 806 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy