International Harvester / Farmall Super HV Parts

[Categories]   [All Super HV Parts]   [All Farmall Models]  

Camshaft Timing Gear - 48 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). Replaces 6664D, 6664DA, 6664DB (Item #: 111368, Ref: 6664DB) $121.44
Connecting Rod Bolt Lock Tab - .420 inch bolt hole diameter. For tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Item #: 167073, Ref: 47499DB) $7.30
Crankshaft Timing Gear - 24 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). Replaces: 43706D (Item #: 121571, Ref: 43706D) $91.00
No Picture Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Item #: VSKH152C) $142.69
Cylinder Head Stud - 7/16 inch x 6 1/8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. 5 Used per engine. Replaces 48939DA (Item #: 178403, Ref: 48939DA) $17.40
Cylinder Head Stud - 7/16 inch diameter x 5-15/16 inches long. Fits H, HV, I4, O4, OS4, Super H, Super HV, Super W4, U164, U4, W4 Industrial: 300, 350, Farmall: 300, 350. 11 used per engine, gas and LP. Replaces: 45009D. (Item #: 178402, Ref: 45009D) $16.40
Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Item #: 179313, Ref: 49407DBX) $10.80
Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Item #: 183906, Ref: IHS2559) $51.00
Governor Thrust Bearing - Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Item #: 183913, Ref: 351910R91) $81.00
Valve Exhaust - Exhaust Valve, length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128741, Ref: 50707DA) $9.70
Valve Guide - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128745, Ref: 8049DR) $4.80
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60
NOTE Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).	NOTE
No Picture Valve Service Kit - Cylinder HEAD Service KIT For Super H, Super HV, Super W4. Contains: springs, guides, locks, (no valves). (Item #: VSKH164A) $71.95
Valve Spring - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128734, Ref: 358197R1) $1.00
Valve, Exhaust - This exhaust valve is for tractors with flat head pistons. Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.08 inch length, 1.38 inch head diameter. (Item #: 172940, Ref: 57697D) $26.00
Valve, Intake - Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.05 inch length, 1.50 inch head diameter. 4 used per engine. Sold individually. (Item #: 172891, Ref: 57696D) $24.60
Valve, Intake - Intake Valve. GAS. Length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128740, Ref: 50706DA) $11.80