FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 856 Parts

Category: Hitch / Drawbar

[Categories] [All 856 Parts] [All Farmall Models]

Center Link Assembly - This is a Category II Center Link Assembly. It consists of 404633R2, 395970R2, 395968R2 and 108592C2. It replaces 108632C93, 400907R92, 404631R92. (Item #: 102071, Ref: 108632C93) $143.00

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Center Link Handle - Category 2 - For International / Farmall tractor models Hydro 100, Hydro 186, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces Case IH OEM number 108592C2, (Item #: 164940) $19.90

Control Arm Kit - Control Arm Repair Kit contains, 38256R21 control arm, 380115R2 roller, 383997R1. 56 series tractor models: 756, 856, 1026, 1256, 1456. Early 66 series models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, 3088-3788, 63 For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 706, 756, 766, 786, 806, 856, 886, 966, 986. (Item #: 113499, Ref: 382565KIT) $46.80

Control Arm Kit - Shifter control repair kit contains, 398300R1 arm, 380115R2 roller, 398304R1 spring. Tractors: 766 after serial number 17047, 966 after serial number 32222, 1066 after serial number 57646, 1466 after serial number 30001 all 1566, 786, 886, 1086, 1486, 1586, 3088 thru 3788 6388 thru 6788. For 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 756, 766, 786, 856, 886, 966, 986. (Item #: 111858, Ref: 398300KIT) $78.00

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.40

Draft Sensing Crank - LH, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM nos 381927R1, 397097R1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496761) $234.01

Drawbar - 1 piece, 45.750 inches long, 2.50 inches wide, 1.50 inches high, (2) 1.165 inch diameter holes at 1.500 inches and 10.500 inches from front. Note: This bar can replace 2 piece assembly (397065R1 bar and 393501R11 tube. For tractor models 1026, 706, 756, 806, 826, 856, (766 serial number up to 13892), (966 serial number up to 270896). (Item #: 109486, Ref: 381706R2) $129.00

Drawbar - Used on International tractor models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, this swinging drawbar measures 56 inches long, 2.750 inches wide, and 1.5 inches thick. It has one 1.385 inch diameter hole 1.50 inch from the front. Replaces part numbers 103502C1, 108502C1, 72476C1, 223351. (Item #: 108762, Ref: 223351) $199.00

Drawbar - Measuring 58.125 inches long, 2.750 inches wide and 1.500 inches thick, this swinging drawbar has one 1.390 inch diameter hole 1.875 inches from the front. It is used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1566, 1586. Replaces 223352, 108504C1, 72571C1 (Item #: 110123, Ref: 223352) $326.00

Drawbar Hammerstrap - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 400297R1, Pin hole is 5-1/2" from bend in strap, For use with spacer 368514R1 (110041), (Item #: 110042) $193.00

Drawbar Hammerstrap Spacer - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 368514R1, (Item #: 110041) $12.20

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 1 inch in diameter by 3-3/4 inches long. It is used on International models 1026, 1206, 1256, 1456, 756, 806, 826, 856, 1066, 1466, 1468, 1566, 1568, 766, 966. This pin is used with 393501R11 front tube as well as other applications. (Item #: 160776, Ref: 389428R1) $25.30

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $15.80

Drawbar Stop Block - For International / Farmall tractor models 756, 766, 856, 966, 2756, 2856, Replaces International OEM number 65301C1, For tractors with two piece swinging drawbar, (Item #: 111299) $29.40

Drawbar Support Casting - Fits fast hitch tractors. For tractor models 1026, 706, 756, 766, 806, 826, 856, 966. (Item #: 110287, Ref: 389064R1) $189.00

Drawbar Support Casting - Used with 2 piece drawbar, 1 inch x 3.5 inch x 16.5 inch. For tractor models 1026, 1206, 706, 756, 766, 806, 826, 856, 966. (Item #: 108541, Ref: 539749R1) $382.00

Drawbar Support Casting - Used with 1 piece drawbar. For tractor models 1026, 706, 756, 766, 826, 856, 966, Hydro 86. Replaces 72392C1. 10.250 inches high. Plate 1 inch x 3.5 inch x 16.5 inch. (Item #: 109485, Ref: 383385R3) $278.00

Drawbar Support Plate - Used with 2 point Fast Hitches with Swinging Drawbars, this part Replaces 389065R1 on 706, 756, 766, 806, 826, 856, 966, 1026, 1206 (Item #: 173026, Ref: 389065R1) $83.00

No
Picture
Drawbar Support Plate, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2826, 2856, 21026, Replaces International OEM number 400714R1, Use with 1 piece or heavy duty drawbar, For a new version of this item use Item #: 111205, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435531) $64.01

Drawbar Support, Front - For tractor models 1026, 21026, 2706, 2756, 2826, 2856, 706, 756, 826, 856, (766 SN# up to 13892), (966 SN# up to 27089), 806, 2806. (Item #: 172677, Ref: 381707R21) $297.00

No
Picture
Drawbar Tube - For International / Farmall tractor models 706 (s/n 19250-later and with 3 Point), 756 (s/n 13892-earlier), 766 (s/n 13892-earlier), 806 (s/n 14500-23000 and with 3 point), 826 (s/n 13892-earlier), 856 (s/n 21116-later and with 2 Point and 3 Point), 966 (s/n 270896-earlier), 1026 (s/n 13892-earlier), Replaces International OEM number 393501R11, Length: 34.875", (Item #: 108793) $326.00

Drawbar with Hammer Strap Holes - The measurements on the swinging drawbar with hammerstrap holes are: Length: 62.250 inches, Width: 3 inches, Height: 1-1/2 inches. It has three 1.390 inch diameter holes located 1.750 inches, 5.937 inches and 15.312 inches from the front. Used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586. (Item #: 110328, Ref: 223353) $249.72

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $114.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

No
Picture
Fasthitch to 3-Point Quick-Attach Assembly - For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Category 2 Straight arm style, This is a one piece assembly with a U style toplink bracket attached to the arms, Top link not included, For Toplink use Item #: 103163, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 111431) $314.30

No
Picture
Fasthitch to 3-point Prongs with Cat 2 Balls - For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Set of 2, Category 2 (straight style arm with balls), Additional Handling and Oversize Fees Apply To This Item, (Item #: 114596) $162.00

Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $32.90

Latch Spring, Lower - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382192R1 (Item #: 109644, Ref: 382192R1) $11.50

Latch Spring, Upper - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382193R1 (Item #: 108835, Ref: 382193R1) $11.50

Latch, Lower Pull Arm - For tractor models 100, 1026, 1206, 1256, 130, 140, 656, 706, 756, 806, 826, 856. All with fast hitch. (Item #: 110394, Ref: 393500R1) $31.40

Latch, Telescoping Lift Arm - For Cat II 3 point hitch. Models: 100, 1026, 1066, 1086, 1206, 1256, 130, 140, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 986. Lower latch spring 382192R1 and upper latch spring 382193R1 are available separately. (Item #: 109475, Ref: 398373R1) $28.00

Left Hand Leveling Screw Assembly - For International / Farmall tractor models 756, 766, 826, 856, 966, 1026, 1206, Replaces International OEM number 397095R2, 22.50" Long, 1.125" Diameter, Less Housing, Right Hand Leveling Screw use Item #: 109477, (Item #: 109478) $63.00

Leveling Box Assembly - This Leveling Box Assembly is used on 1026, 1206, 21026 Industrial, 21206 Industrial, 2706 Industrial, 2756 Industrial, 2826 Industrial, 2856 Industrial, 756, 766, 806, 826, 856, 966, Hydro 100. It replaces part numbers 396752R1, 397096R2, 523861R2 (Item #: 108760, Ref: 396752R1) $191.00

Leveling Screw Housing - Used with 397096R2 screw, this housing is 16.500 inches long. It is used on Hydro 100, 706 (Late), 756, 766, 806 (Late), 826, 856, 966, 1026, 1206. This part replaces 49B52, 396752R1 (Item #: 109479, Ref: 49B52) $92.00

No
Picture
Lift Link Assembly, Cat 2 - Right Hand - For International / Farmall tractor models Hydro 100, 756, 766, 826, 856, 966, 1206, Replaces International OEM number 223310, Right Hand, Contains 109477 (replaces 397096R2) and 109479 (replaces 396752R1), Lift Link Assembly, Cat 2 - Left Hand use Item #: 108760, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108761) $219.00

Lower Lift Arm End, Left - For Category II lower pull arms on models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, this part replaces 398371R11, 382189R11 (Item #: 110392, Ref: 398371R11) $66.00

Lower Lift Arm End, Right - For Category II lower pull arms on models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, this part replaces 398372R11, 382188R11 (Item #: 110190, Ref: 398372R11) $74.00

Lower Pull Arm Pin - Used on International models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, this part replaces 406685R1 (Item #: 112530, Ref: 406685R1) $19.40

No
Picture
Lower Pull Arm Pin, Used - For International tractor models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 406685R1, Front Pin, For a new version of this item use Item #: 112530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435596) $11.01

Pivot Pin, Stabilizer Control Arm - Used with 382386R2 stabilizer control arm. For tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206. (Item #: 128499, Ref: 383362R2) $40.20

Rear Drawbar Support, Used - For International tractor models Hydro 86, 706, 756, 766, 806, 826, 856, 966, 1026, Replaces International OEM number 72392C1, 383385R3, Only for applications with 1 piece drawbars, For a new version of this item use Item #: 109485, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409485) $155.01

Right Hand Leveling Screw Assembly - For International / Farmall tractor models 756, 766, 826, 856, 966, 1026, 1206, Replaces International OEM number 397096R2, 22.50" Long, 1.125" Diameter, Less Housing, Left Hand Leveling Screw use Item #: 109478, (Item #: 109477) $57.15

Stabilizer Control Arm, Used - For International tractor models Hydro 86, Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1206, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488 (Hydro), 3688, Replaces International OEM number 382386R2, 382386R1, For a new version of this item use Item #: 109573, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409573) $140.01

Stabilizer Eyebolt, Rear - Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688 tractors use this Rear Stabilizer Eyebolt. It fits into the lower lift arm and attaches to the rear stabilizer assembly. This part replaces 382397R1 (Item #: 108858, Ref: 382397R1) $20.30

Stabilizer Yoke, Rear - Used on International Models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688, this rear yoke measures 7.250 inches long. Parts associates with this yoke are 382390R1 Eyebolt, 382397R1 Eyebolt, 383363R11 Lockout pin, 384852R1 Pin, 386198R1 Stud, 406244R2 Front yoke, all sold individually. (Item #: 108860, Ref: 406243R1) $44.38

Sway Limiter Assembly - For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688. (Item #: 108856, Ref: 406242R2) $76.00

Sway Limiter Stud - Measuring 8.125 inches long and 1.125 inches in diameter, this stud is used on International Models: Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688 (Item #: 108859, Ref: 386198R1) $32.50

No
Picture
Three Point Lockout Pin - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688, Replaces International OEM number 383363R11, (Item #: 173868) $15.50

Top Link Center - The body of this top link center measures 11.630 inches long, with 5-1.25 inch acme right and left hand threads. It replaces 404633R1, 404633R2. Used on IH models Hydro 100, Hydro 186, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 21206, 21256. It is used with 395968R2 rear end, and 395970R2 front end, neither are included. Comes with 108592C2 handle. (Item #: 167699, Ref: 404633R2) $181.00

Top Link End, Rear - Used on the implement end of International models 1026, 2756, 2826, 2856, 3088, 3288, 3688, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, this part is 13.810 inches overall length, has 1.250 inch-5 Left Hand ACME Thread and a 1 inch diameter hole. Replaces International part number 395968R2. Verify part number or measurements before ordering. Many of the models listed used more than one size. (Item #: 179415, Ref: 395968R2) $128.58

Top Linkage Bracket - For tractor models 1206, 1256, 706, 756, 806, 856. (Item #: 109648, Ref: 382212R41) $157.00

Torsion Spring Bar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM nos 393243R1, 381925R1, Cat II Hitch, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430235) $147.01

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $8.90

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $373.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $371.87

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $444.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $444.00

$Farmall 856 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $60.00

$Farmall 856 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $40.40

$Farmall 856 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$Farmall 856 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $44.30

$Farmall 856 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $58.00

$Farmall 856 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $58.00

$Farmall 856 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $138.00

$Farmall 856 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $99.00

$Farmall 856 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $71.00

$Farmall 856 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $104.00

$Farmall 856 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $298.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $47.71

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.20

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $43.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $39.30

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $58.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $60.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $63.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $64.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $38.10

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $335.41

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $328.58

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.50

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $28.00

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $97.32

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.50

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $26.10

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $33.30

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 856 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy