FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 1046 Parts

Category: Steering

[Categories] [All 1046 Parts] [All Farmall Models]

Cylinder End - Replacing OEM part numbers 3141532R91, 3141532R93 this tie rod end is used on International models 1046, 1246, 433, 440, 523, 533, 540, 553, 624, 633, 640, 644, 654, 724, 733, 740, 744, 824, 833, 840, 844, 844S, 844XL, 940, 946 (Item #: 179728, Ref: 3141532R91) $152.71

Power Steering Cylinder End - From the center of the ball joint to the end of the tube, this power steering cylinder end measures 3.250 inches. It has M20 X 1.5 RH Thread. Used on 4WD front ends on 1046, 1246, 258, 268, 278, 584, 585, 585XL, 644, 684, 685, 685XL, 743, 743XL, 744, 744S, 745S, 745XL, 784, 785, 785XL, 844, 844S, 844XL, 856, 856XL, 884, 885, 885XL, 946, Hydro 84. Replaces 3146035R92, 3146035R1, 3146035R95, 3146035R91, 3146035R94 (Item #: 124614, Ref: 3146035R95) $93.24

Tie Rod End - Measures 4.00 inches from the center of the ball joint to the end of the rod. It is M20 X 1.5 RH Thread. Used on Carraro 4WD front ends. Replaces OEM numbers 83930109, K261842, 3148926R1, 6000100833, 31644800, 609404, 633345, CAR 107633 (Item #: 104599, Ref: CAR107633) $94.00

Tie Rod End - From the center of the ball joint to the end of the rod is 106mm (4.17 inches). The rod end is M24 x 1.5 RH. This part replaces 3223997R1, 48108966 (Item #: 162664, Ref: 3223997R1) $18.98

Tie Rod End - The length of the tie rod end from the center of the ball joint to the the end of the rod is 422.9mm (16.65 inches). The rod is 25/32 inches in diameter with 4 - 3/16 inch holes. Used on International models 1046, 1055, 1055XL, 1246, 946, 955, 955XL. Replaces 3146260R1, 3148929R1 (Item #: 182902, Ref: 3148929R1) $51.00

Tie Rod End - Used on International models 1046, 1055, 1055XL, 1056, 1056XL, 1246, 946, 955, 955XL, 956, 956XL, this part replaces OEM number 3224261R1 (Item #: 182910, Ref: 3224261R1) $44.60

Tie Rod End - International models 1046, 1246, 523, 553, 624, 654, 724, 824, 946 with Heavy Duty, 4WD and power steering use this tie rod end. It measures 5.625 inches from the center ball joint to the end of the tube. The tube is M36 x 1.5 RH Thread. This part replaces 81927245, X800210044000, ZF051303028, 3134240R91, 3134240R92 (Item #: 160199, Ref: 3134240R91) $152.00

Tie Rod End - The male threads M30 x 1.5. Measures 120mm from the center of the ball joint to the end of the rod. This part is used as a power steering cylinder end on some models and a tie rod end on others. Replaces 04-122257, 3221270R91 (Item #: 182903, Ref: 3221270R91) $121.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1046 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy