FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 140 Parts

Category: Steering

[Categories] [All 140 Parts] [All Farmall Models]

Lower Steering Shaft Oil Seal - This lower steering shaft oil seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140. Replaces: 351276R91, 358775R91, 358804R91, 358815R91, 358838R91, 382230R91, 383333R91, 47703D, 530098R91, 65418C1 (Item #: 169955, Ref: 471765) $9.10

Spindle - Spindle left hand/right hand with vertical shaft 13.675 inches, 1.234 inch diameter. Wheel Bearing Kit available as part number WBKIH1 at $22.42. For model 140 with fixed front axle - not for hi clearance. (Item #: 104319, Ref: 370536R91) $117.00

Spindle Bushing - Spindle bushing measures 1.237 inches inside diameter, 1.415 inches outside diameter, has a length of 1.760 inches and is .089 inches thick. For tractor models 100, 130, 140, A, A1, (AV, AV1 with fixed or adjustable front axle), Super A. (Item #: 172907, Ref: 356609R1) $18.10

$Farmall 140 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 13.625 inch, B= 1.234 inch, C= 1.189 inch, D= .750 inch. For tractor models 100, 130, (140 with cast wheels), (AV, AV1, A1, Super A all with fixed or adjustable front axle). Uses Wheel Bearing Kit number WBKIH10. (Item #: 104317, Ref: 356531R91) $174.00

$Farmall 140 Spindle, RH\LH$
Spindle, RH/LH - A= 13.675 inch, B= 1.234 inch, C= 1.250 inch, D= .750 inch. For model 140 with fixed front axle except hi clearance. (Item #: 104319, Ref: 370536R91) $117.00

Steering Gear Repair Kit - Fits Super A, 100, 130, 140. Contains items shown in picture. (Item #: 184168, Ref: S.59527) $73.00

Steering Sector Bushing, Bearing and Seal Kit - This 11-Piece Steering Sector Bushing, Bearing and Seal Kit Includes: Steering worm shaft bushing, steering wheel shaft bushing, steering worm wheel shaft bearing, steering worm bearing, steering gear housing gasket, steering worm oil seal, and steering worm wheel shaft oil seal. Bushings must be honed (reamed) to size when installed. Fits: A, AV, Super A, Super A1, Super AV, Super AV1, 100, 130, 140; Replaces: 1981225C1, 261733, 2099680, 358775R91, 358782R91, 358812R91, 358815R91, 382229R91, 382229R91, 382230R91, 41096DBR, 47675D, 47676DR, 47703D, 48956D, 85652H, R39667, ST287, ST288 (Item #: 182546, Ref: IHS1800) $85.00

Steering Sector Gear - For tractor models Super A, 100, 130, 140. 9 Tooth Worm Gear 1/4 inch Keyway. Use with 70890C1 Shaft. (Item #: 155422, Ref: 70888C1) $136.00

Steering Sector Shaft - For tractor models Super A, 100, 130, 140. Shaft for 9 tooth worm gear part number 70888C1. Tapered shaft nut available as part number 359040R1. (Item #: 155424, Ref: 70890C1) $108.60

Steering Sector Shaft - Keyways are 1/4" wide, 4140 steel, Made in the USA. For model 140. (Item #: 155424, Ref: 70890C1) $108.60

Steering Sector Shaft Bushing - This bushing is used for Vertical Steering Sector Shafts on A, Super A, 100, 130, 140. It is 1.689 inches long with a 1.325 inch outside diameter and a 1.190 inch inside diameter. It must be reamed to size after installation. Replaces: 47676DR. (Item #: 179310, Ref: 47676DR) $22.80

Steering Shaft Support Knuckle - Knuckle with Grease Zerk for steering shaft. For tractor models A, A-I, AV, B, BN, Super A, Super A-1, Super AV, 100, 130, 140. Replaces 8329DX, 365002R11, 9442DX, 6852DX, IHS964. (Item #: 126714, Ref: 9442DX) $33.80

Steering Wheel - For Late 140, 240, Farmall 300 (not utility), 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel 18 inch diameter, 7/8 inch 36 splined hub. Replaces OEM part number 366557R1, 366557R2, 366557R91. (Item #: 101431, Ref: R3217) $42.10

Steering Wheel - With 7/8 inch splined hub. For tractor models 140, 350, 404, 424 without power steering, 444 without power steering, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to serial number 1289. Steering wheel 17 3/8 inch diameter, 7/8 inch hub, for splined shaft. Does not come with center cap. (Item #: 101431, Ref: 366557R2) $42.10

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Steering Wheel Shaft Worm Oil Seal - This steering wheel shaft worm oil seal measures 1.000 inch inside diameter, 1.624 inch outside diameter and has a .250 inch width. Used on A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140 all with Long Steering Wheel Shaft. Replaces: 358229R91, 358782R91, 358821R91, 383332R91, 48956D. (Item #: 126728, Ref: 48956D) $14.00

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $38.10

Tie Rod - Used with .875 inch outside diameter tie rod tube, A= 14.810 inch, B= .624 inch. For tractor models 100, 130, 140, (AV, AV1, A1, Super A all serial number 318310 and up). (Item #: 104366, Ref: 356544R11) $88.00

Tie Rod - A= 14.750 inch, B= .750 inch. For tractor models 100, 130, 140, (AV, AV1, A1, Super A serial number 318310 and up). (Item #: 104369, Ref: 360412R11) $54.00

Tie Rod Clamp - Used on Farmall / IH models, this tie rod clamp fits 574, AV, AV1, A1, CUB, SUPER A, 100, 130, 140, 200, 230, 240, 2400, 248, 2500, 2504, 258, 3230, 340, 385, 404, 4210, 4230, 4240, 454, 474, 484, 485, 504, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 995 (Item #: 104368, Ref: 43747D) $17.50

Tie Rod Clamp - For International / Farmall tractor models A, Super A, 100, 130, 140, Replaces International OEM number 356546R1, (Item #: 104365) $7.60

Tie Rod End - A= 3.060 inch, B= .687 inch, 18 NF left hand thread. For tractor models (AV, AV1, A1, Super A, 100, 130, 140 all with fixed axles), (2404, 2424, 2444, 404, 444 all with heavy duty front axle). (Item #: 104377, Ref: 356541R91) $16.70

Tie Rod End, Inner, RH Thread - 3-1/8 inch to center of post, .687 inch shaft diameter, 18 thread, used on tie rod assemblies with notched outer end and threaded inner end, for swept back adjustable axles 44 inches to 72 inches. For tractor models 100, 130, 140, 330, 340, 404, 424, 444, 454, 464, 484, 504, C, Cub Lo-Boy, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 100859, Ref: 356540R91) $16.10

Tie Rod Tube - 16.062 inch length, .875 inch outside diameter. Tie Rod tube for 100, 130, 140, (A1, AV, AV1, Super A - AFTER serial number 318310.) (Item #: 104363, Ref: 356548R2) $66.00

Tie Rod Tube - 16.125 inches long, 1.00 inch outside diameter, right hand thread, used with 360412R11 tie rod. For tractor models AV, AV1, Cub Lo-Boy, Super A, 100, 130, 140. (Item #: 104367, Ref: 360411R1) $59.00

Tie Rod, Clamp - For tractor models 100, 130, 140, A1 serial number 318310>, AV serial number 318310>, AV1 serial number 318310>, Super A serial number 318310>. (Item #: 104364, Ref: 356543R1) $13.50

Worm Gear Shaft Nut - For tractor models Super A, 100, 130, 140. Nut for Worm Gear Shaft part number 70890C1. (Item #: 155425, Ref: 359040R1) $8.40

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 140 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy