FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 464 Parts

Category: Steering

[Categories] [All 464 Parts] [All Farmall Models]

Front Axle Knee, Left Side - This Front Axle Knee is used on the left side. It measures (A) 9.250 inches from the top of the bearing to top of the tube. It comes with 368621R1 bushings installed. Bushings have a 1.451 inch inside diameter. Used with 365317R91 thrust bearing, not included. It is used on 454, 464, and 484 Tractors, North American with Swept Back Axles. Replaces 66695C91, 405707R12 (Item #: 110734, Ref: 66695C91) $644.37

Front Axle Knee, Right Side - This Front Axle Knee is used on the right side. It measures (A) 9.250 inches from the top of the bearing to top of the tube. It comes with 368621R1 bushings installed. Bushings have a 1.451 inch inside diameter. Used with 365317R91 thrust bearing, not included. It is used on 454, 464, and 484 Tractors, North American with Swept Back Axles. Replaces 405708R12, 66696C91 (Item #: 109444, Ref: 66696C91) $376.72

Front Axle Pivot Shaft - This Front Axle Pivot Shaft is 13.250 inches Long. It is used on 2400, 2500A, 380B, H84, 385, 395, 454, 464, 484, 485, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895, CX100, CX50, CX60, CX70, CX80, CX90. Replaces 405564R91, 405577R1, 405577R2, 527790R91, 538688R91, 539128R1 (Item #: 124722, Ref: 539128R1) $218.00

Power Steering Clevis End - This Power Steering Clevis End has a pin hole of 20 MM (.787 inches) and fits cylinder 188842A1. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549670R2. (Item #: 113280, Ref: 3125306R1) $43.80

Power Steering Cylinder - Complete cylinder with 1 inch diameter shaft. Includes 549670R2 Clevis. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 400587R1, 549667R91, 549667R93, 188842A1, 549667R92, 84336125. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 104583, Ref: 188842A1) $270.00

Power Steering Motor - For International / Farmall tractor models Hydro 100, 454, 464, 574, 674, 766, 966, 1066, 1466, 1468, 1566, 1568 Replaces International OEM number 70110C94, 70111C93, 534852R92, 534994R92, 535231R92, , Compatible with Massey Ferguson tractor models 30, 230, 245, 265, Compatible with Massey Ferguson Construction and industrial models 20C, 30B, 40B, Replaces Massey Ferguson OEM number 544387M93, 544387M91, Shaft is splined with threads, The ports are approximately 45 degrees from the original equipment, For a Remanufactured version of this sku use Item #: 204158, (Item #: 104260) $1149.01

No
Picture
Ring Gear and Pinion Set, Used - For International tractor models 454, 464, 474, 574, 2400A, 2500A, Replaces International OEM nos 65255C1, Teeth: 14 and 51, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434281) $710.01

Spindle Bushing - For tractor models 200, 230, 240, 2400A, 2404, 2424, 2444, 404, 424, 444, 454, (464, 484 standard duty utility). (Item #: 124589, Ref: 368621R1) $25.20

Spindle, Left or Right Side - Used on the left or right hand side, the shaft diameter is 1.67 inches. The shaft length is 12.25 inches. Uses; WBKIH6 wheel bearing kit, 185106C1 thrust bearing, 358958R2 bushing, and 406294R21 hub. (Item #: 100844, Ref: 405840R11) $227.00

$Farmall 464 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 11.625 inch, B= 1.423 inch, C= 1.377 inch, D= .865 inch. For tractor models 2400A, 454, 464, 484 all standard duty. The wheel bearing kit used for this spindle is part number WBKIH8. Replaces 536061R2, 536061R1 (Item #: 104325, Ref: 536061R2) $242.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $40.00

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $52.00

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.40

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $63.00

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $70.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $7.80

Thrust Bearing - For tractor models 200, 230, 240, 2400A, 2404, 2424, 2444, 404, 424, 444, 454, (464, 484 standard duty utility). (Item #: 114558, Ref: 365317R91) $18.30

Tie Rod - For tractor models 454, 464. Notched shaft, measures 13.75 inches long and .750 inch diameter shaft. (Item #: 100870, Ref: 65074C91) $33.90

Tie Rod - Front Axle Tie Rod Parts. Tie rod end, outer, notched {7}, 15-7/8 to center of post. Used on tie rod assemblies with notched outer end and threaded inner end. For swept back adjustible axles 48 to 80 on tractors: 454, 464, 484 with 1-7/16 outside diameter For 454, 464, 484 (Item #: 100861, Ref: 65077C91) $28.70

No
Picture
Tie Rod Assembly - For International / Farmall tractor models 454 (Swept Back Front Axle), 464 (Swept Back Front Axle), Replaces Case IH OEM number 65077C91, 356540R91, 67529C1, 390686R1, 43747D, Stud Taper: 0.546" - 0.624", Additional Handling and Oversize Fees Apply To This Item, (Item #: 160088) $136.00

Tie Rod End, Inner, RH Thread - 3-1/8 inch to center of post, .687 inch shaft diameter, 18 thread, used on tie rod assemblies with notched outer end and threaded inner end, for swept back adjustable axles 44 inches to 72 inches. For tractor models 100, 130, 140, 330, 340, 404, 424, 444, 454, 464, 484, 504, C, Cub Lo-Boy, Super A-1, Super AV, Super AV-1, Super C, Super A. (Item #: 100859, Ref: 356540R91) $16.10

Tie Rod Tube - Measuring 16.440 inches long with a 1 inch outside diameter, this Tie Rod Tube is used the following tractors with swept back axles: 574, 2400A 56-76 inch tread, 2500A with 56-76 inch tread, 385 with 48-80 inch tread, 454 with 48-80 inch tread, 464 with 48-80 inch tread, 484, 485, 584, 585. (Item #: 104407, Ref: 527659R2) $52.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 464 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy