FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 5120 Parts

Category: Steering

[Categories] [All 5120 Parts] [All Farmall Models]

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $8.70

Front Hub, Six Bolt - This new Front Hub has a 6 inch bolt circle. The holes are M16 X 1.5 RH. Used on IH tractors 5120, 5130, 5140, 5220, 5230, 5240, 5250. Replaces 1533896C1 (Item #: 115383, Ref: 1533896C1) $440.00

Half Shaft Bushing - Many Carraro Mechanical Four Wheel Drive front axles use this inner half shaft bearing. This part replaces OEM numbers 381410A1, 47110070, 6914496, 6190247M1, CAR116962, D142950, 85807965, 82848085, 195207A1, 1-33-741-643, D142950, 3541401M1 (Item #: 156141, Ref: CAR116962) $5.70

Half Shaft Bushing - This bushing is closest to the wheel on the Carraro front axle shaft. Replaces OEM numbers 09968019, 109972, 5194292, CAR109972, 83930156, 9968019, 1967535C1, 05194292 (Item #: 156143, Ref: CAR109972) $9.70

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $8.60

King Pin - Used in Mechanical Four Wheel Drive front axles, this part replace OEM numbers CAR118526, 83952503, N13504 (Item #: 156167, Ref: CAR118526) $87.00

King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726) $26.30

King Pin Thrust Bushing - Used on several Carraro 4WD front ends, this bushing replaces OEM numbers CAR123641, 83982431, 9967999, 09967999, 3541400M1, N14372 (Item #: 156137, Ref: CAR123641) $35.60

King Pin, Upper - Used on the upper side of the hub on mechanical four wheel drive the King Pin (trunion) replaces OEM numbers 1995414C1, 81863173, CAR125149 (Item #: 129293, Ref: CAR125149) $112.00

Kingpin - MFWD Lower - For Case IH 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250. This part replaces OEM numbers 83952503, CAR118526, 3475348M1, 153326212, 137700410835, N13504 (Item #: 156167, Ref: 83952503) $87.00

Kingpin - MFWD Upper - For Case IH 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250 tractors with Mechanical Four Wheel Drive: 5640, 6640, 6640O, 7740, 7740O, 7840, 7840O, 8240, 8340. This part replaces OEM numbers 1995414C1, 81863173, CAR125149 (Item #: 129293, Ref: 81863173) $112.00

Roller Bearing - Used in many Four Wheel Drive Systems, this bearing measures 109.5mm (4.311 inches) inside diameter, 158.8mm (6.25 inches) outside diameter and 21.2mm (o.834 inches) wide. Replaces OEM numbers ZP0735370150, 81676C1, 84592016, 47724311, 5133737, 83952531, K395101, H1482196, CAR118370, 9967690, CAR045180, CAR142088, K395101, ZP0735370150, 83952531, 47724311, 5133737, 84592016, 6914441, 9967690, 83985020, 89967690, CAR118370, 81676C1, 05133737, 47724311, H1482196, K395101, 81676C1 (Item #: 156047, Ref: JD10249) $78.00

Spindle - LH - The measurements on the spindle are 12.875 inch vertical shaft, 2.163 inch shaft diameter, 2.360 inch inner wheel bearing diameter, 1.770 inch outer wheel bearing diameter. This spindle replaces 1533042C1. (Item #: 115385, Ref: 1533042C2) $450.00

Spindle - RH - The measurements on the spindle are 12.875 inch vertical shaft, 2.163 inch shaft diameter, 2.360 inch inner wheel bearing diameter, 1.770 inch outer wheel bearing diameter. This spindle replaces 1533043C1 (Item #: 115386, Ref: 1533043C2) $327.00

Tie Rod Assembly - This Assembly includes 83957796 ball joint, 126144A1 tie rod end, nuts and clamps. Used on 5120, 5130, 5140, 5220, 5230, 5240, 5250 (Item #: 160843, Ref: 1997713C2) $203.00

Tie Rod, LH Thread, 4WD - For tractor models 1896, 2096, 5120, 5130, 5140, 5220, 5230, 5240, 5250. (Item #: 104434, Ref: N14388) $43.40

Tie Rod, RH Thread, 4WD - For tractor models 1896, 2096, 5120, 5130, 5140, 5220, 5230, 5240, 5250. Replaces N14377 (Item #: 104855, Ref: N14377) $56.00

Universal Joint - Many mechanical four wheel drive front axles use this universal joint. This part has 27mm cup diameter and is 70.9mm across (1.063 X 2.791 inches). Replaces OEM numbers 247543A1, 81882C1, 1-33-742-629, 137700420872, 144461A1, 137700420874, 195215A1, 337260A1, D149733, B507526, CAR40869, N14156, N14411, 9968059, 84355357, 85807283, 84990205, 9970163, 85805996, 87306931, CAR40889, 81874740, 85805996, 9968059, 09968059, 1-33-742-629, CAR40825, 84355357, AL71316, RE212902, ABP3002508, 508360, ABP3004431 (Item #: 158432, Ref: CAR40825) $34.80

Yoke and Shaft Assembly - Used on Carraro 4WD front ends, this shaft and yoke assembly replaces OEM part numbers N14156, 195214A1, 40821, 137700420874, 3476312M1, 137700420870, 153326679, D149733, CAR40890, 9968061, 81879C1, 81882C1, N14409, CAR40844 (Item #: 156154, Ref: CAR40844) $128.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.30

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 5120 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy