FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 644 Parts

Category: Steering

[Categories] [All 644 Parts] [All Farmall Models]

Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. Used on International models: 585, 644, 685, 743, 744, 745, 785, 844, 856, 885 (Item #: 124660, Ref: L35603) $382.00

Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. Used on International models: 585, 644, 685, 743, 744, 745, 785, 844, 856, 885 (Item #: 124661, Ref: L35604) $230.00

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $240.62

Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. International models 644, 744, 844 (Item #: 160162, Ref: AL32884) $338.00

Cylinder End - Replacing OEM part numbers 3141532R91, 3141532R93 this tie rod end is used on International models 1046, 1246, 433, 440, 523, 533, 540, 553, 624, 633, 640, 644, 654, 724, 733, 740, 744, 824, 833, 840, 844, 844S, 844XL, 940, 946 (Item #: 179728, Ref: 3141532R91) $152.71

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

Power Steering Cylinder End - From the center of the ball joint to the end of the tube, this power steering cylinder end measures 3.250 inches. It has M20 X 1.5 RH Thread. Used on 4WD front ends on 1046, 1246, 258, 268, 278, 584, 585, 585XL, 644, 684, 685, 685XL, 743, 743XL, 744, 744S, 745S, 745XL, 784, 785, 785XL, 844, 844S, 844XL, 856, 856XL, 884, 885, 885XL, 946, Hydro 84. Replaces 3146035R92, 3146035R1, 3146035R95, 3146035R91, 3146035R94 (Item #: 124614, Ref: 3146035R95) $93.24

Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.98

No
Picture
Steering Wheel - 3 Spoke - For International / Farmall tractor models 433 (Diesel, 1/75-12/85), 433 (with Silent 85 Cab, Diesel, 1/74-later), 533 (Diesel, 1/75-12/85), 533 (1/74-later), 533, 633 (with Silent 85 Cab, Diesel, 1/75-12/85), 633 (1/75-later), 644 (Diesel, 1/74-12/81), 654, 724 (Diesel, 1/67-12/74), 733 (with Silent 85 Cab, Diesel, 1/80-12/85), 733 (1/80-12/85), 744 (Diesel, 1/74-12/81), 824 (Diesel, 1/72-12/74), 833 (with Silent 85 Cab, Diesel, 1/81-12/85), 833 (1/81-12/85), 844 (Diesel, 1/74-12/80), 844 (S, Diesel, 1/75-12/81), Replaces International OEM number 3057154R91, O.D.: 15-1/2", (Item #: 171530) $47.00

Tie Rod End - Measures 4.00 inches from the center of the ball joint to the end of the rod. It is M20 X 1.5 RH Thread. Used on Carraro 4WD front ends. Replaces OEM numbers 83930109, K261842, 3148926R1, 6000100833, 31644800, 609404, 633345, CAR 107633 (Item #: 104599, Ref: CAR107633) $94.00

Tie Rod End - This Tie Rod End measures 725.2mm (28.551 inches from the center of the ball joint to the end of the rod. The rod has 6 - 3/16 inch holes. Used on international 644, 743, 743XL, 744, 745, 745S, 844, 844S, 844XL, 845, 845XL. (Item #: 180322, Ref: 3223995R1) $131.00

Tie Rod End - From the center of the ball joint to the end of the rod is 106mm (4.17 inches). The rod end is M24 x 1.5 RH. This part replaces 3223997R1, 48108966 (Item #: 162664, Ref: 3223997R1) $18.98

Tie Rod End - Used on International models 644, 743, 743XL, 744, 745, 745S, 745XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL all with power steering, this part replaces 3223996R1 (Item #: 180511, Ref: 3223996R1) $117.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 644 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy