Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1)$45.00
Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 330 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA)$2.50
Drive Shaft - Used on ZF Axle APL335 this shaft is found on IH tractors 248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL. Replaces ZP4472352075, ZP0769126310, 83949049, 81320C1 (Item #: 124728, Ref: ZP0769126310)$16.98
Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147)$69.00
Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134)$19.30
King Pin - Case IH models (248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL) use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335 and APL 735. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Item #: 156196, Ref: ZP4472352162)$117.00
MFWD Joint Assembly - If you have a ZF Axle number APL335, this universal joint closest to the wheel, behind the hub. This was original equipment from 5/1984 - 1/1987 with APL335 Axle. Ford 5110, 5610, 6410, 6610, 6810, 7610. Replaces OEM numbers 83961173, 83946022, ZP7029910301, ZP0501205313, 1968452C1, 81307C1, 81307C2. (Item #: 156194, Ref: ZP7029910301)$586.00
O-Ring / Seal - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA)$7.10
Planetary Gear - Used in APL 335 and APL 330 Axles, on tractors with mechanical four wheel drive, the is the gear closest to the hub. Sold individually. Replaces OEM numbers ZP4472352014, ZP0769126276, 83946053, 81325C1. Used on International models: 238, 248, 258, 268, 288, 385, 395, 485, 485XL, 495, 495XL, 585, 585XL, 595, 595XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL (Item #: 124634, Ref: ZP4472352014)$104.00
Planetary Ring Gear - Found on ZF Axle APL 335, this Planetary Ring Gear is used on CaseIH models 248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL. Replaces 83954879, 83946031, ZP4472352168, ZP4472352058 (Item #: 124705, Ref: ZP4472352168)$391.00
Power Steering Cylinder End - From the center of the ball joint to the end of the tube, this power steering cylinder end measures 3.250 inches. It has M20 X 1.5 RH Thread. Used on 4WD front ends on 1046, 1246, 258, 268, 278, 584, 585, 585XL, 644, 684, 685, 685XL, 743, 743XL, 744, 744S, 745S, 745XL, 784, 785, 785XL, 844, 844S, 844XL, 856, 856XL, 884, 885, 885XL, 946, Hydro 84. Replaces 3146035R92, 3146035R1, 3146035R95, 3146035R91, 3146035R94 (Item #: 124614, Ref: 3146035R95)$105.00
Power Steering Cylinder Rod - Used on UK built International 2 wheel drive tractors, this part replaces 549668R1, 549668R2, 188851A1, 549668R3, 188854A1. Used on 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C (Item #: 182916, Ref: 549668R1)$332.00
Seal Kit, Power Steering Cylinder - For 2 wheel drive models 454, 464, 574, 674, 484, 584, 684, 784, 884, 385, 485, 585, 685, 885, 595, 695, 995, 2400, C50, C60, C80, C90, C100, 4210, 4230, 4240. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 115098, Ref: 55355C91)$41.00
Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N, 129-290, 88886, 427639, 88886 (Item #: 156038, Ref: 387930S36)$1.10
Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009)$0.50
Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062)$73.00
Tie Rod Assembly - This Tie Rod Assembly is used on Adjustable Straight Axles (52 Inches to 82 Inches Tread Width). It Replaces 3125171R2, 3125171R3, 1332805C2, 3116406R3, 3116406R4, 3116406R5, 3116321R93, 1538016C1. (Item #: 156878, Ref: 1538016C1)$153.37
Universal Joint - Measuring 27mm 1 1/16 inches) x 70mm (2 3/4 inches) this universal joint is used on the axle of APL 335, 325, 345, 350, and 300. Replaces OEM numbers ZP7029457207, 83964587, 84355357, ZP7029457210, 1342711C1, 81873051, 144465A1, 1342715C1, 83956476, ZP0501205345, 9968059, 247543A1, AL64126 (Item #: 124613, Ref: 1342711C1)$95.00
Universal Parts and Accessories Category: Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275)$8.00
Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279)$10.10
Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278)$13.40
Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323)$16.10
Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277)$8.90
Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280)$8.00
No Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276)$9.60
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
