FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 885 Parts

Category: Steering

[Categories] [All 885 Parts] [All Farmall Models]

Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. Used on International models: 585, 644, 685, 743, 744, 745, 785, 844, 856, 885 (Item #: 124660, Ref: L35603) $382.00

Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. Used on International models: 585, 644, 685, 743, 744, 745, 785, 844, 856, 885 (Item #: 124661, Ref: L35604) $230.00

Axle Knee Left Hand - Used on the following tractors with straight front axles: 685, 695, 884, 895, Hydro 84, 684, 784, 885. For Left Hand order 108811. Replaces 3116436R91 (Item #: 108810) $278.98

Axle Knee Right Hand - Used on the following tractors with straight front axles: 685, 695, 884, 895, Hydro 84, 684, 784, 885. For Left Hand order 108810. Replaces 3116437R91 (Item #: 108811) $205.98

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $240.62

Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. International models: 585, 685, 743XL, 745XL, 785, 844XL, 856XL, 884, 885 (Item #: 115716, Ref: AL32883) $111.98

Ball Joint and Rod - This part is 7.540 inches long and M20 X 1.5 right hand thread. Used on: 238, 238 UK Series, 248, 248 UK Series, 258, 258 UK Series, 268, 268 UK Series, 288, 288 UK Series, 395, 395 UK Series, 485, 485 UK Series, 495, 495 UK Series, 585, 585 UK Series, 595, 595 UK Series, 685, 685 UK Series, 695, 695 UK Series, 743, 743 European, 745, 745 European, 745S, 785, 785 UK Series, 795, 795 UK Series, 844, 844 European, 844S, 844XL, 844XL European, 845, 845 European, 856XL, 856XL European, 885, 885 UK Series, 895, 895 UK Series, 995XL, 995XL UK Series. Replaces 1968463C1, 1868468C1, 1968468C1. (Item #: 104398, Ref: ZP0501310060) $49.80

Bearing Assembly - On APL 335 Axles, the bearing is located behind the input gear set. It replaces OEM numbers 83945716, 83985018, ZP0750117352, 87387938, 268735, 5143109, ZP0735370350, 81214C1, 455387C91 (Item #: 180113, Ref: ZP0735370350) $168.00

Bearing Assembly - On APL 335 Axles, the bearing is located behind the input gear set, closest to the back of the tractor. Measures 31.75mm inside diameter, 68.26mm outside diameter, 22.225mm wide. Replaces OEM part numbers 671031R91, K620116, 671032R1, ZP0735370840, 81232C1, 671033R1, 81231C1, 83985012, 86516897, AL71100, L60075, L60076, 86508082, 86505020, 86505016, 81820262, 81232C1, 81231C1, 671032R91, 671031R1, A153749, A153748 (Item #: 180111, Ref: ZP0735370840) $26.80

Bushing, Front Axle Steering Arm - For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. Replaces 153687C1. (Item #: 104494, Ref: 405574R1) $6.80

Bushing, Front Axle, Steering Arm - Associated with 379555R11 steering arm. For tractor models 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, 2400, 2500, 3220, 3230, 4210, 4220, 4230, 4240, C50, C60, C70, C80, C90, CX50, CX60, CX70, CX80, CX90, CX100. (Item #: 104493, Ref: 379748R1) $9.00

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $42.10

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $42.10

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 330 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drive Shaft - Used on ZF Axle APL335 this shaft is found on IH tractors 248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL. Replaces ZP4472352075, ZP0769126310, 83949049, 81320C1 (Item #: 124728, Ref: ZP0769126310) $27.98

Front Axle Bolt - Used to secure front axle knees, this bolt measures 4-3/4 inches overall, 4 inches to the shoulder and has 3/4-16 UNF RH Thread. If nuts are needed, order 116643. Replaces part number 405584R1 (Item #: 124558) $9.90

Front Axle Knee, Left Side - Used on the following with Swept Back Axles: 2500A, 385, 395, 484, 485, 495, 584, 585, 595, 685, 695, 885, 895, 995, 574. This Front Axle Knee measures 9.500 inches from the top of the thrust bearing to the top of the tube. Comes with 358958R2 bushing. If thrust bearing is needed, order 185106C1. Replaces 66701C91, 405712R12 (Item #: 110733, Ref: 405712R12) $532.00

Front Axle Knee, Right Side - Used on the following with Swept Back Axles: 2500A, 385, 395, 484, 485, 495, 584, 585, 595, 685, 695, 885, 895, 995, 574. This Front Axle Knee measures 9.500 inches from the top of the thrust bearing to the top of the tube. Comes with 358958R2 bushing. If thrust bearing is needed, order 185106C1. Replaces 405713R12, 66702C91 (Item #: 108890, Ref: 405713R12) $526.00

Front Axle Nut - Used with part number 124558 to secure axle knees, this nut is 3/4 inch -16 UNF thread. Replaces 405576R1 (Item #: 116643) $2.50

Front Axle Pinion Shaft Seal - Used on APL 335 Mechanical Four Wheel Drive Axles, this seal is located at the input shaft to the differential. Replaces OEM numbers 83945747, ZP0750110088, 81233C1 (Item #: ZP0750110088) $32.27

Front Axle Pivot Shaft - This Front Axle Pivot Shaft is 13.250 inches Long. It is used on 2400, 2500A, 380B, H84, 385, 395, 454, 464, 484, 485, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895, CX100, CX50, CX60, CX70, CX80, CX90. Replaces 405564R91, 405577R1, 405577R2, 527790R91, 538688R91, 539128R1 (Item #: 124722, Ref: 539128R1) $218.00

Front Bolster - For International / Farmall tractor models Hydro 84, 248, 268, 385, 484, 485, 584, 684, 685, 784, 884, 885, Replaces International OEM number 3121169R4, (Item #: 124586) $1359.01

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on International models: 395, 485, 495, 585, 595, 685, 695, 743XL, 745XL, 785, 795, 844XL, 845, 856XL, 885, 895, 995 (Item #: 124593, Ref: L60747) $13.30

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following International models: 385, 395, 485, 495, 585, 595, 685, 695, 743XL, 745XL, 785, 795, 844XL, 845, 856XL, 885, 895, 995 (Item #: 124592, Ref: L60748) $15.20

Half Shaft Bushing - Measuring 1.815 inches inside diameter, 1.971 inches outside diameter and 0.985 inches wide, this is the inner bushing on ZF APL335 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81287C2, 83956845, L60147, ZP0730260618. This front axle can be found on the following International models: 685, 695, 743XL, 745XL, 785, 795, 856XL, 885, 895, 995 (Item #: 158091, Ref: L60147) $34.70

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $64.00

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $16.80

Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on International models: 385, 395, 485, 495, 585, 595, 685, 695, 885, 895 (Item #: 156193, Ref: AL63606) $612.00

King Pin - Case IH models (248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL) use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335 and APL 735. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Item #: 156196, Ref: ZP4472352162) $103.87

MFWD Joint Assembly - If you have a ZF Axle number APL335, this universal joint closest to the wheel, behind the hub. This was original equipment from 5/1984 - 1/1987 with APL335 Axle. Ford 5110, 5610, 6410, 6610, 6810, 7610. Replaces OEM numbers 83961173, 83946022, ZP7029910301, ZP0501205313, 1968452C1, 81307C1, 81307C2. (Item #: 156194, Ref: ZP7029910301) $586.00

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $143.28

$Farmall 885 O-Ring \ Seal$
O-Ring / Seal - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $6.70

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on International models: 395, 485, 495, 585, 595, 685, 695, 743XL, 745XL, 785, 795, 844XL, 845, 856XL, 885, 895, 995 (Item #: 124690, Ref: L53819) $2.40

Planetary Gear - Used in APL 335 and APL 330 Axles, on tractors with mechanical four wheel drive, the is the gear closest to the hub. Sold individually. Replaces OEM numbers ZP4472352014, ZP0769126276, 83946053, 81325C1. Used on International models: 238, 248, 258, 268, 288, 385, 395, 485, 485XL, 495, 495XL, 585, 585XL, 595, 595XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL (Item #: 124634, Ref: ZP4472352014) $118.84

Planetary Ring Gear - Found on ZF Axle APL 335, this Planetary Ring Gear is used on CaseIH models 248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL. Replaces 83954879, 83946031, ZP4472352168, ZP4472352058 (Item #: 124705, Ref: ZP4472352168) $571.00

Power Steering Clevis End - This Power Steering Clevis End has a pin hole of 20 MM (.787 inches) and fits cylinder 188842A1. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549670R2. (Item #: 113280, Ref: 3125306R1) $43.80

Power Steering Cylinder - Complete cylinder with 1 inch diameter shaft. Includes 549670R2 Clevis. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 400587R1, 549667R91, 549667R93, 188842A1, 549667R92, 84336125. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 104583, Ref: 188842A1) $270.00

Power Steering Cylinder End - From the center of the ball joint to the end of the tube, this power steering cylinder end measures 3.250 inches. It has M20 X 1.5 RH Thread. Used on 4WD front ends on 1046, 1246, 258, 268, 278, 584, 585, 585XL, 644, 684, 685, 685XL, 743, 743XL, 744, 744S, 745S, 745XL, 784, 785, 785XL, 844, 844S, 844XL, 856, 856XL, 884, 885, 885XL, 946, Hydro 84. Replaces 3146035R92, 3146035R1, 3146035R95, 3146035R91, 3146035R94 (Item #: 124614, Ref: 3146035R95) $93.24

Power Steering Cylinder Plate - Used on 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 495, 584 Indust/Const, 595, 674, 684, 685, 695, 784, 785, 795, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, MX100C, MX80C, MX90C (Item #: 124616, Ref: 405580R21) $40.00

Power Steering Cylinder Rod - Used on UK built International 2 wheel drive tractors, this part replaces 549668R1, 549668R2, 188851A1, 549668R3, 188854A1. Used on 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C (Item #: 182916, Ref: 549668R1) $292.00

No
Picture
Ring Gear and Pinion Set, Used - For International tractor models Hydro 84, 268, 278, 584, 674, 684, 685, 784, 785, 884, 885, Replaces International OEM nos 65779C1, Teeth: 11/ 52, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434313) $540.01

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on International models: 395, 485, 495, 585, 595, 685, 695, 743XL, 745XL, 785, 795, 844XL, 845, 856XL, 885, 895, 995 (Item #: 124691, Ref: AL63617) $45.90

Seal Kit, Power Steering Cylinder - For 2 wheel drive models 454, 464, 574, 674, 484, 584, 684, 784, 884, 385, 485, 585, 685, 885, 595, 695, 995, 2400, C50, C60, C80, C90, C100, 4210, 4230, 4240. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 115098, Ref: 55355C91) $39.60

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

Spindle Felt Seal - This Felt Washer is used with 405840R12 and 534288R91 Spindles. Fits tractor models 238, 248, 258, 385, 395, 454, 475, 474, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 685, 695, 885, 895, 3220, 3230, 4210, 4230 and 4240. (Item #: 102176, Ref: 15943DA) $2.30

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N, 129-290, 88886, 427639, 88886 (Item #: 156038, Ref: 387930S36) $1.10

Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.98

$Farmall 885 Spindle, L\R$
Spindle, L/R - This spindle works both Left hand and right hand. Shaft length 12.125 inch, shaft diameter 1.687 inch, inner bearing 1.375 inch, outer bearing .842 inch. For models 238, 248, 258, 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 685, 695, 885, 895, 3220, 3230, 4210, 4230, 4240, C50, C60. The wheel bearing kit used for this spindle is part number WBKIH6. (Item #: 100844, Ref: 405840R12) $227.00

$Farmall 885 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 9.50 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, Hydro 84. The wheel bearing kit used for this spindle is part number WBKIH9. (Item #: 104328, Ref: 3125872R91) $201.00

$Farmall 885 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 8.312 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 268, 278, 3230, 4210, 4230, 4240, 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, 995, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. The wheel bearing kit used for this spindle is part number WBKIH9. (Item #: 100846, Ref: 3121270R91) $178.00

$Farmall 885 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 11.250 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 268, 278, 3230, 4210, 4240, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. The wheel bearing kit used for this spindle is part number WBKIH9. (Item #: 104329, Ref: 3121261R91) $203.00

Steering Arm Assembly - For International / Farmall tractor models Hydro 84, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 67499C91, (Item #: 158746) $740.00

Steering Arm, Left Hand - This is a left hand steering arm use on adjustable front axel. 52 inch to 77 inch Used on IH models 268, 278, 3230, 4210, 4230, 4240, 584 Indust/Const, 585, 684, 685, 695, 784, 785, 884, 885, 895, 995, CX100, CX70, CX80, CX90, Hydro 84 Replaces 3121263R1 (Item #: 124740, Ref: 3121263R1) $375.00

Steering Arm, Right Hand - This Right Hand Steering Arm is used on 268, 278, 3230, 4210, 4230, 4240, 585, 595, 684, 685, 695, 784, 785, 884, 885, 895, 995, CX100, CX70, CX80, CX90, Hydro 84. It replaces 3121264R1 (Item #: 124741, Ref: 3121264R1) $172.98

Steering Bar Assembly - For tractor models 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 84 Hydro, 884, 885, 885XL, 895, 895XL, 995XL. (Item #: 124616, Ref: 405580R11) $40.00

Steering Motor, Hydrostatic - No relief valve. For tractor models (385, 484, 485, 585 up to serial number 18001), 684, 685, 784, 884, 885, 380B. (Item #: 104262, Ref: 67698C93) $449.00

Steering Motor, Hydrostatic - Models without relief valve. 248, 258, 268, 278, 385, 484, 485, 584 Indust/Const, 684, 685, 784, 884, 885. Replaces 67698C91, 67698C92, 67698C93, 67698C94 (Item #: 104262, Ref: 67698C92) $449.00

Steering Shaft, Hydrostatic Motor - 9 inches overall length. For tractor models 385, 484, 485, 584, (585 less cab up to serial number 18001 with heavy duty front axle), (684 with heavy duty front cast axle), (685, 885 less cab), 784, 884, 380B. (Item #: 153931, Ref: 3121187R91) $71.00

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $70.00

Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Tie Rod - Tie rod end, outer, recess for set screw (7) at bottom, 15 inch to center of post, .812 inch rod diameter. Used on tie rod assemblies with set screw recess outer end and threaded inner end. For straight adjustable axles 52 to 80. For tractor models Hydro 84, 385, 395, 484, 485, 495, 584 except utility For 385, 395, 484, 485, 495, 584, 595, 684, 685, 695, 784, 884, 885, 895, 995, HYDRO 84. Replaces 3116406R3, 1332805C1, 3125171R1, 1332805C2. (Item #: 100865, Ref: 3116406R3) $28.80

Tie Rod - Tie rod end, inner, right hand thread, 3-7/8 inch to center of post. 0.875 Inch x 16 RH Thread. Used on tierod assemblies with set screw recess outer end and threaded inner end. For straight adjustable axles 52 to 80 on tractors: Hydro 84, 385, 395, 484, 485, 495, 584, 684, 784, 884. 52 to 82 on tractor For 385, 395, 484, 485, 495, 584, 595, 684, 685, 695, 784, 884, 885, 895, 995, HYDRO 84. (Item #: 100864, Ref: 3116407R3) $17.20

Tie Rod - Tie rod end, outer, recess for set screw (6), 14-1/8 inch to center of post. Used on tie rod assemblies with set screw recess outer end and threaded inner end. For straight adjustable axles 52 to 77 on tractors: Hydro 84, 595, 684, 685, 695, 784. 884, 885, 895, 995.52 For 584, 595, 684, 685, 695, 784, 884, 885, 895, 995, HYDRO 84 (Item #: 100872, Ref: 3125171R2) $36.90

Tie Rod - A= 4.16 inch, B= M30 x 1.5 inch inside diameter right hand thread. For tractor models 258, 268, 278, 584, 585, 684, 784, 785, 884, 885, Hydro 84 all with 4WD. (Item #: 124763, Ref: 1502269C2) $54.98

Tie Rod Assembly - This Tie Rod Assembly is used on Adjustable Straight Axles (52 Inches to 82 Inches Tread Width). It Replaces 3125171R2, 3125171R3, 1332805C2, 3116406R3, 3116406R4, 3116406R5, 3116321R93, 1538016C1. (Item #: 156878, Ref: 1538016C1) $131.18

Tie Rod Assembly, Complete - Due To Multiple OEM Styles, Individual Pieces May Not Fit Models Listed, But Can Use Assembly As A Replacement. Assembly Consist Of: (1) 65079C91, (1) 527658R91, (1) 67529C1, (1) 390686R1, (1) 43747D. 65079C91: Stud Taper= .606 To .700 inches, 527658R91: Stud Taper= .606 To .700 inches. Used on 574, 2400A Straight Front Axle serial number 100006 and up, 2500A Straight Front Axle serial number 100004 and up, 385 Straight Front Axle, 454 Straight Front Axle serial number 100006 and up, 484, 485, 495 Straight Front Axle, 584 Adjustable Straight Front Axle, 585, 595 Adjustable Straight Front Axle, 674 Straight Front Axle, 684, 695 Adjustable Straight Front Axle, 784, 884, 885 below serial number 3083. (Item #: 124766, Ref: 223326) $125.00

Tie Rod Clamp - Used on Farmall / IH models, this tie rod clamp fits 574, AV, AV1, A1, CUB, SUPER A, 100, 130, 140, 200, 230, 240, 2400, 248, 2500, 2504, 258, 3230, 340, 385, 404, 4210, 4230, 4240, 454, 474, 484, 485, 504, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 995 (Item #: 104368, Ref: 43747D) $17.50

Tie Rod End - This Tie Rod End is 9.750 inches long and has M22 x 1.5 inch right hand thread. It replaces original part number 1968464C1. (Item #: 124764, Ref: 1968464C1) $45.00

Tie Rod End - Used on the following with non-adjusting Cast I Beam front axles: 574, 2400A, 2500A, 2544, 2656, 380B, HYDRO 84, 454, 484, 485, 495, 544, 584, 585, 595, 595XL, 656, 684, 685, 685XL, 784, 884, 885, 885XL, 895, 895XL. A= 4.00 inch, B= 13/16 inch, 16 left hand thread. Replaces 379326R91 (Item #: 104593, Ref: C5NN3A300C) $25.40

Tie Rod Tube - This Tie Rod Tube is 16.187 inches long and with 7/8 inch 16 thread. It replaces 3116408R1. (Item #: 104409, Ref: 3116408R1) $40.90

Universal Joint - Measuring 27mm 1 1/16 inches) x 70mm (2 3/4 inches) this universal joint is used on the axle of APL 335, 325, 345, 350, and 300. Replaces OEM numbers ZP7029457207, 83964587, 84355357, ZP7029457210, 1342711C1, 81873051, 144465A1, 1342715C1, 83956476, ZP0501205345, 9968059, 247543A1, AL64126 (Item #: 124613, Ref: 1342711C1) $106.00

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Wheel Half Shaft Seal, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this seal measures 1.388 inches inside diameter, 2.055 inches outside diameter and is 0.588 inches wide. Replaces OEM numbers 81411C2, 83956841, 83961163, AL63351, AL68702, ZP07050110133. Used on International models: 395, 485, 495, 585, 595, 685, 695, 743XL, 745XL, 785, 795, 844XL, 845, 856XL, 885, 895, 995 (Item #: 124717, Ref: AL63351) $24.20

Wheel Hub Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL1351 Mechanical Four Wheel Drive front ends. This part replaces, L35606, ZP1927576, 3216588R1, 81927576. Some of the models listed used more than one 4 wheel drive front end. Verify part number or axle number before ordering. Used on International models: 585, 685, 743XL, 745XL, 785, 844XL, 856XL, 885 (Item #: 124686, Ref: L35606) $33.20

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on International models: 385, 395, 485, 495, 585, 595, 685, 695, 743XL, 745XL, 785, 795, 844XL, 845, 856XL, 885, 895, 995 (Item #: 124687, Ref: E1NN3B626AA) $78.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 885 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy