FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall B414 Parts

Category: Steering

[Categories] [All B414 Parts] [All Farmall Models]

Drag Link End - A= 3.060 inch, B= .625 inch, 19 right hand thread. For tractor models 238, 275, 276, 354, 374, 384, 414, 434, 444, B250, B275, B414, 2300A. Replaces 3045309R91, 3040922R92 (Item #: 128358, Ref: 3040922R92) $30.10

Drag Link End - A= 3.060 inch, B= .625 inch, 19 left hand thread. For tractor models 275, 276, 354, 374, 384, 414, 434, 444, B250, B275, B414. Replaces 3040921R11, 3071055R91. (Item #: 104376, Ref: 3045309R91) $34.40

No
Picture
Front Axle Pivot Pin - For International / Farmall tractor models B414, 276, 354, 364, 384, 434, 444, 2300, 2350, Replaces International OEM number 3043857R1, (Item #: 163569) $30.90

Jam Nut - For International / Farmall tractor models B275, B414, 354, 364, 2300A, Replaces International OEM number 705248R1, (Item #: 104373) $29.00

Side Cover Gasket - This is a Steering Gear Side Cover Gasket used on IH B275 and B414 Tractors. It replace original part number 708609R1 (Item #: 180184, Ref: 708609R1) $2.10

Spindle Bearing - For tractor models (354, 364, B275, B414 with early serial numbers), (M early with OEM wide front axle). (Item #: 107056, Ref: 39862D) $27.50

Spindle Bushing - For tractor models (B275, B414, 354, 364 all early serial number models), (M early Farmall with OEM wide front axle). (Item #: 107057, Ref: 40090D) $15.00

Spindle Bushing - For tractor models (354, 364, B414 with late model SN#). (Item #: 107049, Ref: 751942R1) $18.40

Spindle, LH - This spindle measures A= 11.70 inch, B= 1.609 inch, C= 1.375 inch, D= 1.125 inch. For tractor models 2300, 2350A, 354, 364, 384, 434, 444, B414. The wheel bearing kit used for this spindle is part number WBKIH5. (Item #: 104322, Ref: 3043927R1) $376.00

Spindle, LH, Front - This spindle has a vertical shaft that measures 9.750 inches. For tractor models B275, B276, 354, 364, B414, B434, 2300. The wheel bearing kit used for this spindle is part number WBKIH5. (Item #: 104320, Ref: 3043864R1) $66.98

Spindle, RH - This spindle has a Vertical shaft measuring 9.750 inches. For tractor models B275, B276, 354, 364, B414, B434, 2300. The wheel bearing kit used for this spindle is part number WBKIH5. (Item #: 104321, Ref: 3043865R1) $253.00

Spindle, RH - This spindle measures A= 11.70 inch, B= 1.609 inch, C= 1.375 inch, D= 1.125 inch. For tractor models 2300, 2350A, 354, 364, 384, 434, 444, B414. The wheel bearing kit used for this spindle is part number WBKIH5. (Item #: 104323, Ref: 3043928R1) $233.98

Stay Rod Cap - For tractor models 2424, 2444, 384, 424, 444, B414. Replaces 842388R1. (Item #: 179053, Ref: 3109613R1) $14.20

Stay Rod Socket - For tractor models 2424, 2444, 384, 424, 444, B414. (Item #: 179669, Ref: 3043920R1) $12.10

Steering Bearing and Race - This Steering Bearing and Race is used on B275 and B414 Tractors. It replaces 708611R1 and 708612R1 (Item #: 153392, Ref: 708611R1) $28.30

Steering Box Assembly - This steering box assembly is for tractor models B250, B275, B414. Replaces 708600R1. This assembly uses steering wheel part number R2090 or 2N3600 which both are available on our web page. (Item #: 119859, Ref: 3070228R92) $370.00

Steering Sector Bushing - This Steering Sector Bushing is used on B414 and B275 Tractors. It replaces original part number 708601R1 (Item #: 179386, Ref: 708601R1) $18.10

Steering Sector Seal - This Steering Sector Seal is used on IH B275 and B414 Tractors. It replaces original part number 708602R1 (Item #: 168899, Ref: 708602R1) $10.50

Steering Sector Shaft - This Steering Sector Shaft (Rocker Shaft) is used on IH B275 and B414 tractors. It replaces original part number 708605R1 (Item #: 179604, Ref: 708605R1) $77.00

Steering Shaft Bushing - This is the upper Steering Shaft Bushing used on IH B275 and B414 Tractors. It replace original part number 708613R1 (Item #: 168886, Ref: 708613R1) $5.00

Steering Shaft Upper Gasket - This Steering Shaft Upper Gasket is used on IH B275 and B414 Tractors. It replaces original part number 708623R1 (Item #: 180310, Ref: 708623R1) $3.80

Steering Wheel - This Steering Wheel is For single keyed shaft. Tapered hub .707 inch to .775 inch, .191 inch keyway width. Uses Nut 351114CCBlack, 351114CC or 351114S (Item #: 168964, Ref: 708424R91) $26.50

Steering Worm Shaft - This Steering worm Shaft is used on IH B275 and B414 Tractors. It replaces original part number 708604R1 (Item #: 179390, Ref: 708604R1) $89.00

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref: T163) $21.70

Tie Rod End - This Tie Rod End is 3.125 inches from center of ball joint to end of shaft, has a 0.750 inch - 16 right hand thread shaft. Replaces 3040920R92, 3071097R91. (Item #: 104384, Ref: 3040920R92) $19.90

Tie Rod Tube - 34.40 inches long .760 inch inside diameter. 3/4 inch X 16 UNF thread. For tractor models B275, B414. (Item #: 104382, Ref: 3041063R1) $57.00

Tie Rod, Left Hand - This Tie Rod is 32.000 inches long and 0.750 inches in diameter. It is used on the following International Tractors: 2300, B275, B414 (Manual and Power Steering), 2350A, 276. Case-IH TRACTOR: 354, 364, 384, 434, 444. It replaces original part numbers 3071096R91, 3040919R91 (Item #: 104371, Ref: 3040919R92) $76.00

Tie Rod, Short - A= 3.125 inch, B= .750 inch, 16 right hand thread. For tractor models B414, 354, 364, 384. (Item #: 104384, Ref: 3040920R91) $19.90

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All B414 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy