FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall H Parts

Category: Steering

[Categories] [All H Parts] [All Farmall Models]

Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Item #: 120010, Ref: 7453) $966.00

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $450.00

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

No
Picture
Axle Extension Tube - Standard duty, 11-5/8". For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108809, Ref: 3036) $206.98

No
Picture
Axle Extension Tube - schwartz part (Item #: 110830, Ref: 3037) $198.98

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 111582, Ref: 7465) $343.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 172645, Ref: 7470) $406.00

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref: 48841D) $13.50

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.70

No
Picture
Char-Lynn E58-121 Power Steering - Bracket - For International / Farmall tractor models H, M, Super M, Super MTA, Replaces International OEM number E58-121, 121, Use with 111933 Torque Generator, (Item #: 111414) $69.00

Front Axle Assembly, Wide, without hubs - For H, Super H, 300, 350. Complete Front Axle without hubs contains cap screws with lock washer, steering bracket assembly, rear saddle assembly, front saddle assembly, spindles and Castlellated nuts. Width on wide axles are adjustable from 60 inches to 86 inches. (Item #: 111415, Ref: 21015) $2508.20

Front Axle Clamp Pin - For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $12.10

No
Picture
Front Saddle Assembly - Fits Schwartz front end ONLY. For tractor models 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, H, M, MTA, Super H, Super M. (Item #: 172611, Ref: 7443) $332.00

Oil Seal - Oil seal for bearing kit FW113FS. External Lip, Spring Loaded, Closed Case Seal, 2.786 in od, 1.75 in id, and .294 in wide. For Tractors H, Super H, M and MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4. Check measurements. (Item #: 110745, Ref: 48539DA) $11.00

No
Picture
Pivot Pin 4-3/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 110958, Ref: 1394) $36.20

Pivot Pin Bushing Schwartz 60304 - For International / Farmall tractor models H, M, Super M, Super MTA, 300, 350, 400, 450, 504, 544, 560, 606, Replaces International OEM number 60304, Used on Wide Front conversion Kits., O.D.: 1.5", I.D.: 1.251", Length: 1.37", (Item #: 108886) $8.70

Pivot Pin Jam Nut - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, (Item #: 108889) $9.90

No
Picture
Pivot Pin, 6-11/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super M, Super H. (Item #: 110959, Ref: 1393) $10.98

No
Picture
Rear Saddle Assembly - For model s. 300, 350, H, Super H. Piece for Schwartz steering assy. (Item #: 126649, Ref: 2201) $249.00

Rear Support Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, 1850, Replaces OEM number 60305, (Item #: 110729) $6.60

Replacement Plug - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Replaces International OEM number 1389, (Item #: 108806) $7.10

Spindle - For International / Farmall tractor models H, Super H, 300, 350, Vertical Length: 13-3/8", Shaft Diameter: 1-5/8", Spline Diameter: 1-5/8", Seal Diameter: 1.750", (Item #: 110629) $199.00

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80

No
Picture
Spindle Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 7469, 1139-61539, A24K, B1A24K, For Heavy Duty Wide Front Ends, Length: 1.502", OD: 2.002", ID: 1.755", (Item #: 108895) $13.80

Spindle-LH - This spindle is for tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 104340, Ref: 360419R91) $141.98

Spindle-RH - This spindle is for tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 104330, Ref: 360420R91) $232.00

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $500.00

Stay Rod Assembly, Used - For International tractor models H, HV, M, MD, Super H (s/n 19234-later), Super M (s/n 60001-later), 300, 350, 400, 450, 460, 544, 560, 656, 660, 706, 756, 806, 826, 856, 1026, 1206, 1256, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 360405R11, Wishbone, Adjustable Wide Front Axle, For a new version of this item use Item #: 167990, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429882) $325.01

No
Picture
Steering Arm, LH - Left hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 109364, Ref: 2130) $92.00

No
Picture
Steering Arm, RH - Right Hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108808, Ref: 2129) $89.00

No
Picture
Steering Bracket Assembly - For tractor models 300, 350, H, Super H. For Schwartz front end. (Item #: 126650, Ref: 2203) $227.88

Steering Bracket Assembly - For International / Farmall tractor models H, M, MTA, Super H, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Replaces International OEM number 3049, (Item #: 110829) $106.00

Steering Sector Gear, Used - For International tractor models H, Super H, 300, 350, Replaces International OEM number 50038DB, Teeth: 32, Splines: 6, Full Circle Type, Has Helical Cut, Diameter: 5", Thickness: 1.5", For a new version of this item use Item #: 128568, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435943) $50.01

Steering Shaft - For H, HV, Super H, Super HV, Farmall 300, 350. Overall length 43 inches, 3/4 inch shaft, threaded end 3/4 inch UNF. (Item #: 126730, Ref: 50047DB) $148.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60

Steering Universal Joint - For tractor models H, Super H, M, Super M, 300, 350, 400, 450. Steering Universal Joint complete joint with yokes, pins and grease fitting. 7/8 inch ID. Not for Keyed yokes. (Item #: 127570, Ref: USJ78) $127.00

Steering Wheel - 16 inch diameter, 3/4 inch keyed hub, 3 covered spokes. For tractor models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Item #: 126718, Ref: 29118DC) $45.10

Steering Wheel - 17-5/8 inch diameter, 3/4 inch hub, for keyed shaft. 3 Spoke. Super A serial number 356000 and up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 and 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Item #: 101429, Ref: 60070D-OE) $42.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Item #: 157780, Ref: 353435X1) $1.00

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $38.10

Steering Worm Gear - For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Item #: 128568, Ref: 50038DB) $98.00

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Item #: 178091, Ref: ST225B) $9.30

Steering Worm Shaft Oil Seal - This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Item #: 122678, Ref: 43800D) $5.50

Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref: T163) $21.70

Tie Rod - Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Item #: 111711, Ref: 22513) $37.40

Tie Rod Assembly - Using this tie rod assembly for the models listed will take modification, but it is the only one available for factory original row crop models: H, M, MD, MTA, Super H, Super M, Super MD, Sure MTA, 300, 350, 400, 450. This tie rod assembly tapered ball stud measures 0.675 inch to 0.762 inch at the widest point of the taper shaft, with 5/8-18 thread. The tie rod is adjustable to a maximum of 34-1/4 inches and a minimum of 20-7/8 inches. Fits factory INTERNATIONAL wide front axles only (with tierods behind the center axle.) Will NOT fit Swartz, Norden, Speeco, or other aftermarket wide front axles. To make this assembly work for these applications, the center tube must be shortened about an inch. We do not have instructions for doing this modification. This part can not be returned if you make modifications to the tube. Contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. (Item #: 100869, Ref: 223313) $85.00

Tie Rod Tube - Tube only. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108807, Ref: 1606) $24.98

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 112262, Ref: 22812) $71.00

Tie Rod, DU Axle - Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Item #: 108804, Ref: 22813) $61.00

No
Picture
Tie Rod, Inner - Inner tie rod with jam nut, seal and stud nut. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 103164, Ref: 22512) $35.40

Upper Front Bolster Pivot Shaft - For H serial number 167994 and up, Super H, 300, 350. Upper Front Bolster Pivot Shaft. (Item #: 110923, Ref: 69060D) $180.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All H Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy