International Harvester / Farmall Cub Lo-Boy Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Band - Lined Brake Band (1). For Cub after serial number 173600. Replaces 358753R21, 358753R21AF, 358753R22 (Item #: 105418, Ref: 358753R21) $26.10
Brake Drum - For Cub, Cub Lo-Boy. Brake Drum. (0690R) (Item #: 105412, Ref: 350805R2) $41.50
Brake Pedal Return Spring - For tractor models Cub, Cub Lo-Boy. (Item #: 126158, Ref: 350951R1) $7.00

Clutch
Clutch Alignment Tool - 15/16 inches x 10 spline. For model Cub, Cub Lo-Boy. (Item #: 114935, Ref: 900151) $8.00
Clutch Disc - For Cub, Cub Lo-Boy, Pacer, Pony. (Rockford Style Clutch) 6-1/2 inch diameter, 15/16 inch hub, 10 spline, organic lining. (Item #: 113818, Ref: 351773R91) $37.80
Clutch Housing Inspection Cover - This Clutch Housing Inspection Cover fits Cub, and Cub Lo-Boy. Replaces: 351485R2 (Item #: 126138, Ref: 351485R2) $29.10
Clutch Kit - Carbon Release Bearing - For International / Farmall tractor model Cub (Lo-Boy), Replaces International OEM number 251266R1, 350921R11, 351760R91, 351773R91, Clutch Diameter - 6-1/2', Clutch Hub Diameter - 15/16", Clutch Splines - 10, Clutch Center - Solid, Clutch Type - Woven, Pressure Plate Size - 6-1/2', Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Type - Single Stage, Pilot Bushing, Release Bearing (carbon) and Pilot Tool included, For Pressure Plate use Item #: 114935, (Item #: 118503) $113.00
Clutch Release Yoke Pivot Pin - This Clutch Release Yoke Pivot Pin has a 0.373 inch diameter and 5.695 inch length. It is made from improved 4140 steel. It fits Cub and Cub Lo-Boy and replaces original part number 350948R1. (Item #: 126163, Ref: 350948R1) $18.50
Clutch Release Yoke, Pair - Right and left hand sides. For tractor models: Cub above SN# 32229 and Cub Lo-Boy. Replaces 353240R2, 353239R2. (Item #: 126164, Ref: 3532LR) $37.50
Clutch Release, Yoke (Left Hand) - Fits Cub above serial number 32229 and Cub Lo-Boy. (Item #: 172558, Ref: 353239R2) $20.70
Clutch Release, Yoke (Right Hand) - Fits Cub above serial number 32229 and Cub Lo-Boy. (Item #: 172560, Ref: 353240R2) $15.10
Clutch Shaft and Transmission Spline Shaft with Bushing - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces International OEM number 351534R21, Does Not Fit 154, 184, 185, Length 42-1/4", (Item #: 126166) $142.85
Clutch disc - 5 1/2 inch new clutch disc, Spline DIAMETER: 0.9375 inch, spline COUNT : 10. Fits Cub Lo-Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 154346, Ref: 404640R93) $30.00
Pressure Plate - This Pressure Plate is used on models Cub, Cub Lo-Boy. Pressure Plate Assembly: 6 1/2 inch, 3 fingers, 6 spring, cast plate. Verify diameter. (Item #: 122626, Ref: 351760R91) $91.00
Pressure Plate Assembly - For International / Farmall tractor models Cub (154), Cub Lo-Boy, Cub 154, Cub 184, Cub 185, Replaces International OEM number 404639, 404639R94, 84358395, GV73340028, Pressure Plate Size: 5-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Flywheel Step: Flat, (Item #: 154344) $92.00
Release Bearing, Original Style - 1.250 inch inside diameter. For Cub, Cub Lo-Boy. Clutch Release Bearing. (Graphite) (Item #: 118645, Ref: 350921R11-OE) $45.00
Release bearing - NOT Graphite - Release Bearing, With New and Improved Automotive Style Roller (Thrust) Bearing, not fixed graphite like original. For tractor models Cub, Cub Lo-Boy. (Item #: 121968, Ref: 350921R11) $56.00
Remanufactured Pressure Plate - Remanufactured Pressure Plate: 5 1/2 inches with 3 springs. Fits Cub Lo-Boy, Cub 154-Lo-Boy, Cub 185 Lo-Boy, Cub 184. Verify size before ordering. (Item #: 206062, Ref: 404639-R) $99.01

Cooling System
Belt, Fan - This Fan Belt measures 31.00 inches length and 0.700 inch width. For Cub and Cub Lo-Boy serial number 501 and up, gas. Please verify measurements before ordering (Item #: 164833, Ref: 251428R1) $13.20
Fan Assembly, Early - This fan assembly includes 12 1/4 inch fan and 3 1/2 inch outside diameter pulley for models Cub and Cub Lo-Boy engine serial numbers 501 to 165152. Assembly includes fan, pulleys, bearings and shaft. This fan assembly has an improved sealed bearing, no need to grease. Replaces: 131489C1, 251427R91, 251645R91, 251427R1. Will not fit 154, 184 or 185. (Item #: 100773, Ref: 251427R91) $78.00
Fan Pulley Assembly, Late - This pulley assembly fits Cub and Cub Lo-Boy C-60 engine serial number 165153 and up, Super A with C-113 engine serial number 317192 and up, Super AV and Super AV1 with C-123 engine, Super AV1 with C-113 engine serial number 317192 and up, Super C with C-123 engine, 100 and 130 with C-123 engine, (200, 230 and 240 with C-123 engine below serial number 65000). Fan mounting bolt thread is 12-24 UNC, 3.125 inch bolt pattern. Shaft is 5/8 inch -18 Thread. 4.379 inch outside diameter rear pulley. 4.062 inch outside diameter front pulley. VERIFY MEASUREMENTS. Will not fit 154, 184 or 185. (Item #: 126187, Ref: 131486C91) $152.00
Radiator - Radiator, for tractors: Cub, Cub Lo-Boy. For gasket, order part number 351032R1, not included. For Cub, Cub Lo-Boy. Replaces: 351878R92, 351878R93, 353903R92 (Item #: 101705, Ref: 351878R92) $160.00
Radiator Bolt and Washer Kit - Contains 18 bolt and 18 washers. Stainless Steel. For tractor models Cub, Cub Lo-Boy. (Item #: 178069, Ref: IHS951) $17.60
Radiator Cap, Original - Fits Cub and Cub Lo-Boy to serial number 248124. Restoration quality. Exactly like the original. The radiator cap measures 2.335 inches OD. The tang to tang distance is 1.990 inches with a tang width of .370 inches. Replaces 361705R91, 362323R91 (Item #: 111606, Ref: 400080) $12.90
Radiator Cap, Pressurized - 7 psi cap for 1 inch tall filler neck, 2.33 inch outside diameter, 2.0 inch tang to tang, 1.367 inch tall. For tractor models Cub 1975 to 1979 serial number 248125 and up, will also fit older Cubs when a pressurized system is desired. Will NOT fit 154, 184, 185 Cubs. (Item #: 110011, Ref: 365892R91) $7.00
Radiator Cap, Pressurized - 7 psi cap for radiators with 3/4 inch deep filler neck, 2.33 inch outside diameter, 2.0 inch tang to tang, 1.096 inches tall. For model Cub 1975 to 1979 serial number 248125 and up, also fits older Cubs if pressurized system is desired, (Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy to use original cover you must drill 2 holes in the wings of the cap to mount the cover). (Item #: 173447, Ref: 404548R1) $7.30
Radiator Gasket - For tractor models Cub, Cub Lo-Boy. (Item #: 114468, Ref: 351032R1) $6.00
Radiator cap - Fits Cub and Cub Lo-Boy. Non-Pressure Cap. (Item #: 111606, Ref: 400586R1) $12.90
Tower Hose Clamp 2.685" to 2.995" - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.70
Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.90

Decals and Emblems
No Picture Side Emblem - This vertical "Lo-Boy" emblem is made of stainless steel. It fits the International Cub Lo-Boy up to serial number 10000 and the Farmall Cub Lo-Boy serial number 185001-210000. It measures 1 inch wide and 5 7/8 inches long. (Item #: 126568, Ref: 364045R1) $45.20
Side Emblem - This Side Emblem measures 5 7/8 inches long and 1/2 inch tall. This fits tractor models Cub (serial number 185001 to 210000), 100, 130, 200, 230, Cub Lo-Boy: Cub Lo-Boy (up to serial number 10000); Replaces: 362389R1. McCORMICK. 1 piece for 1 side. Replaces OEM number 362389R1. (Item #: 103925, Ref: R4203) $40.30

Drive Train
1st and Reverse Sliding Gear - For tractor models Cub, Cub Lo-Boy. 13 teeth. (Item #: 125674, Ref: 350867R1) $36.50
2nd and 3rd Sliding Gear - This 2nd and 3rd Sliding Gear has 16 and 26 teeth. It fits Cub (serial number 192113 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy Replaces: 364520R1. (Item #: 111923, Ref: 364520R1) $90.00
Differential Shaft - For Cub, Cub Lo-Boy. Left hand, 12 teeth. (0112R) (Item #: 178646, Ref: 350800R1) $96.00
First and Reverse Shift Fork - For tractor models: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 355600R93, 355600R91, 353270R1, 353042R1, 353044R1, 352772R1. (Item #: 178743, Ref: 355600R92) $92.00
Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90
Inner Differential Bearing Retainer Seal - This Inner Differential Bearing Retainer Seal is used in Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, and Cub 185 Lo-Boy. It measures 1.832 inches outside diameter, 1.062 inches inside diameter and is 0.250 inch wide. Two used per tractor. Sold individually. Replaces Replaces: 18674K, 359787R91, 377239R91, 377240R91, 381908R91, 383315R91, 385872R1, 385872R91, 555382R91, 555398R91 (Item #: 178165, Ref: 18674K) $8.30
Oil Seal - Fits: [A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 2404, 404 (Top Transmission Shaft Front Seal)], [B-250, B-275, B-276, B-414, 2300, 2300A, 2424, 2444, 3414, 3444, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal)], [Cub, Cub Lo-Boy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal)], [M, MD, MDV, MV (Transmission Counter Shaft Front Seal)], MTA (Front Wheel Seal; with single front 900 x 10 wheel), [O4, OS4 (PTO Output Shaft Seal; serial number 2159 to 9300)], [Super M, Super MD, Super MDV, Super MV (Transmission Counter Shaft Front Seal; up to serial number F52627 and up to seril number L51241)], W4 (PTO Output Shaft Seal; serial number 786 to 9300). Replaces: 21969D, 264694R91, 287440R91, 3043788R91, 3043788R92, 358765R91, 358784R91, 358808R91, 358823R91, 381907R91, 42177D, 43278D, 50839D, 530969R91, 703907R91, 703908R92, A29424. (Item #: 178204, Ref: 381907R91) $6.00
Transmission Case Rear Cover Plate Gasket - This Transmission Case Rear Cover Plate Gasket Fits: Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Lo-Boy. It replaces original part number 350837R3 (Item #: 125607, Ref: 350837R3) $9.60
Transmission Gasket Kit - Cub, Cub Lo-Boy, [Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy (without creeper drive)] Replaces: 350846R1, 350866R1, 351546R1. (Item #: 182468, Ref: 350846R1KIT) $17.10
Transmission Gasket Kit - Cub, Cub Lo-Boy, [Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy (without creeper drive)] Replaces: 350846R1, 350866R1, 351546R1. (Item #: 182468, Ref: 350846R1KIT) $17.10
Transmission Shaft - Fits Cub. 42-3/8 inches long, 10 splines clutch end, 10 and 6 splines transmission end. Transmission Input Shaft. For Cub, Cub Lo-Boy, clutch-to-transmission shaft. Replaces: 351534R11 and 351534R21. (Item #: 111654, Ref: 351534R11) $326.00
Transmission Spline Shaft Oil Seal - This Transmission Spline Shaft Oil Seal comes with retainer and gasket. IH changed the seal design from the original leather style. This kit will replace both seals. Replaces 350865R91, 350866R1, 528810R2, 528810R91 (Item #: 178961, Ref: 350865R91) $47.80

Electrical System
Alternator Bracket Kit - Direct bolt on, uses existing belt, no cutting on hood. For mounting alternator # ABC535 found in our catalog. For tractor models Cub, Cub Lo-Boy. (Item #: IHALTCub) $49.26
No Picture Alternator Bracket Kit - For International / Farmall tractor models Cub, Cub Lo-Boy, Direct Bolt On, Includes Mounting Hardware, (Item #: 178206) $49.80
Battery Box Grommet - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, I4, I6, I9, M, MD, O4, O6, Super H, Super M, Super MTA, Super W4, W4, W6, W9, 300, 350, 400, 450, Replaces International OEM number 248-1146, 24179D, 52118D, (Item #: 126446) $2.90
No Picture Battery Cable - This Battery to Starter Switch cable is about 87 inches long. The cable is 2 Gauge and has a black PVC covering with soldered and heat sealed ends. This cable is for the Cub up to serial number 224400 and the Cub Lo-Boy up to serial number 18700. Replaces: 351956R91, 3519456R91. (Item #: 182738, Ref: 351945R91) $79.00
Battery Cable Hold Down Clip - For International / Farmall tractor models Cub, Cub Lo-Boy, Cub 154, Cub 184, Cub 185, Replaces International OEM number 351929R1, 363504R1, (Item #: 126455) $17.00
Cable Rear Light - 56 inches total length, 12 volt, for Cub serial number 239877 and above. (Item #: 161895, Ref: 387312R91) $15.50
Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $114.00
Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $114.00
Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80
Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00
Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $17.90
Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10
Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $31.40
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90
Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.80
Distributor Tach Drive Housing Block Off Plate - This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1. (Item #: 150708, Ref: 363764R1) $9.50
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.80
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $11.10
Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $11.10
No Picture Generator - A&I Description error does not fit cub (Item #: 172496, Ref: 1947580) $323.32
Generator - 6 volt, 35 amp. For tractor models 330 gas, 340 gas, 140 serial number 26800 and below, Cub Lo-Boy serial number 16398-18700, Cub serial number 221293-224400, 240. Refundable $25.00 core charge will be added to orders. Replaces 1100052, 1100055, 368652R92. (Item #: 178426, Ref: TG-72) $363.00
Ignition Switch - For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Item #: 111178, Ref: 54207DB) $13.40
Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Item #: 111177, Ref: 62801DC) $10.30
Key Switch - This 2 position key switch comes with 1 key and has 3 terminals. Fits a 13/16 inch dash hole. For tractor models (140 from serial number 45001 and up), (Cub from serial number 239827 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 123. (Item #: 164325, Ref: 60736C1) $30.70
Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30
Magneto Coil Cover - This new J4 Coil Cover with Gasket fits Cub and Cub Lo-Boy with J4 Magnetos. Replaces 251502R11 (Item #: 105660, Ref: 251502R11) $55.00
Magneto Winding J4 - For tractors using a J-4 Magneto. Replaces 352355R91, 251563R91, 21A561 (Item #: 107079, Ref: 352355R91) $84.00
Magneto or Distributor Shaft Seal - The Seal measures 3.256 inches outside diameter, 2.063 inches inside diameter, and 0.500 inches wide. It is used as a magneto or distributor drive seal on Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 2511379R1, 251379R91, 450313 (Item #: 172914, Ref: 251379R1) $31.10
Magneto, Remanufactured, 251492R91 - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces International OEM number 251492R91, International magneto model J4, For Coil Cover use Item #: 105571, (Item #: 203722) $650.01
Rotor - Rotor for J-4 magneto with teeth. Replaces: 351692R91, J4 Rotor. (Item #: 105598, Ref: 351692R1) $46.30
Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $16.00
Starter - Fits Cub, MD, and 50 Baler. Also fits Model 64 Harvester. Replaces 1109603, 1109613, 1109611. Starter does not come with a switch. This starter is not for applications with Solenoid and a starter post on the starter. (Item #: 127036, Ref: 1109611) $240.00
Starter - Delco Style (4787), Remanufactured, Delco Remy, 1109611, 1109603 - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces Delco Remy manufacturer number 1109611, 1109603, 1109613, Replaces manufacturer number 4787, 140-012, 91-01-4171, 44-9928, Delco Style, Voltage: 6, Rotation: Clockwise, Teeth: 10, For a New version of this sku use Item #: 127036, (Item #: 203487) $530.11
Starter Drive - For Cub and Lo-Boy 1947-1964, 3230, W9, 390. (Item #: 109966, Ref: 1850844) $37.70
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Item #: 105669, Ref: 1925781) $9.20
No Picture Starter, Rebuilt - Fits 1947-52: Cub, MD, and 50 Baler. 1954-55: Model 64 Harvester, Farmall Cub engine C-60. 1958-61: Lo-Boy, Farmall Cub. Refundable core charge of $30.00 will be added to your order. (Item #: 203407, Ref: 1109603) $154.00
Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Item #: 110972, Ref: 1918322) $10.00
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50
Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $30.30
Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $40.10
Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70
Voltage Regulator - Regulator, 6 volt, positive ground, saddle mount, 4 terminal. Replaces Delco cut outs 1116766 and 1116809 when used with conversion kit VRK1815. For tractor models Cub, Cub Lo-Boy, A, Super A, B, C, H, M. Replaces: 1118265, 1118305, 1118790, 1118786. (Item #: 105284, Ref: VR1813) $33.00
Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 and 1119575. Fits tractor models: 100, 130, 140, 200, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $30.00
Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 and 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 172582, Ref: 585624C1) $5.60
No Picture Wiring Harness, Main, 12V, 1964-68 - Fits Cub serial number 224401 and up, Cub Lo-Boy serial number 18701 and up. Original style with cloth covered laquered wire and cotton braid. Also replaces 387262R91. (Item #: 173053, Ref: 404353R1) $51.00
Wiring Harness, Main, 6 Volt, 1947 to 1949 - For tractor models Cub (with serial number 501 to 99535) with Generator Relay Wire. Original style with cloth covered laquered wire and cotton braid includes front lights. (Item #: 133285, Ref: 351325R91) $102.00
Wiring Harness, Main, 6V, 1950-1954 - For Cub, Cub Lo-Boy (serial number 99536 to 185000) without ground cable wire, with voltage regulator wire. Lights are single wire, no ground. Original style with cloth covered laquered wire and cotton braid. (Item #: 133286, Ref: 354252R92) $111.00
Wiring Harness, Main, 6V, 1955-58 - Wiring Harness. For Cub (with serial number 185001 to 210000), Cub Lo-Boy (with serial number 501 to 10000) with lights, ground cable wire and voltage regulator wire. For use with lights requiring a ground wire. This is restoration quality all wires have original cloth wrap. (Item #: 126810, Ref: 363507R91-RES) $246.00
Wiring Harness, Main, 6V, 1955-58 - NOT Restoration Quality (for "Working Tractor"). Wiring Harness, Main, 6 volt, 1955 to 1958. For Cub (with serial number 185001 to 210000), Cub Lo-Boy (with serial number 501 to 10000) with lights, ground cable wire and voltage regulator wire. For use with lights requiring a ground wire. Individual wires are plastic coated with bundle cloth wrapped. (Item #: 126810, Ref: 363507R91) $246.00
No Picture Wiring Harness, Main, 6V, 1959-64 - For tractor models Cub serial number 210001 to 224400 and Cub Lo-Boy serial number 10568 to 18700. Does not include headlight wiring. Reproduction of original with cloth covered laquered wire and cotton braid. (Item #: 182797, Ref: 371032R91) $157.15
No Picture Wiring Harness, Rear Light - This harness is for the switch to rear light. Original style. For tractor models (Farmall Cub and Cub Lo-Boy 1959 to 1964 serial number 210001 to 224400), (International Cub Lo-Boy serial number 10568 to 18700). (Item #: 180177, Ref: 371033R91) $307.87
Wiring Harness, Rear Light with Ground - For tractor models Cub (serial number 185001 to 210000), Cub Lo-Boy (with serial number up to 10567). This harness is for the switch to rear light with ground cable 6-Volt. Length is 64 inches long. Restoration quality. (Item #: 172760, Ref: 363508R91) $25.98

Engine Bearings
No Picture Connecting Rod Bearings - .002" - For International / Farmall tractor models Cub, Cub Lo-Boy, (Item #: 179147) $23.90
Connecting Rod Bearings - .010 - For International / Farmall tractor models Cub, Cub Lo-Boy, (Item #: 179148) $84.00
No Picture Main Bearing Set, .010 - Complete main bearing set for Cub Lo-Boy and Cub, .010 Size. For C60 engine. (Item #: 106557, Ref: MBK60-010) $65.00
No Picture Main Bearing Set, .020 - Complete main bearing set for Cub Lo-Boy and Cub, .020 Size. For C60 engine. (Item #: 106558, Ref: MBK60-20) $63.00
No Picture Main Bearing Set, .030 - Complete main bearing set for Cub Lo-Boy and Cub, STANDARD Size. For C60 engine. (Item #: 106559, Ref: MBK60-30) $107.00
Main Bearing Set, Standard - Complete main bearing set for Cub Lo-Boy and Cub, STANDARD Size. For C60 engine. (Item #: 106555, Ref: MBK60) $52.00
Main Bearings - .002" Oversize - Set - For International / Farmall tractor models Cub (lo-Boy), Cub Lo-Boy, Cub 154, Cub 184, Cub 185, Compatible with International Engine (s) C60, Replaces International OEM number 377268R91, Sold in complete sets, Bearing Size: .002" Oversize, For Standard main bearing use Item #: 106557, (Item #: 106556) $91.00
PTO Camshaft Bearing - For International / Farmall tractor models Cub (185), Cub Lo-Boy, Cub 154, Cub 185, Replaces International OEM number 59769C91, (Item #: 125611) $38.60
Piston Pin Bushing - Models: Cub, Cub Lo-Boy, engine serial number 261717 and below using Connecting Rod number 251246R13. (flat head piston) (rod bearing length .761 inch) (for sleeveless engines). (Item #: 160333, Ref: 251247R2) $8.20
No Picture Rod Bearing - Single rod bearing available in STD. For tractor models Cub, Cub Lo-Boy with C60 engine and rod forging # 527457R11. Standard journal measures 1.499 inches. The bearing measures 0.661 inches in width. Replaces YTO CB-998P-STD, 251251R94, 274466R11, and 527458R11. (Item #: 106440) $24.80
Rod Bearing - Single rod bearing in 0.002. For Cub Lo-Boy and Cub. For C60 engine with serial number less than ENGINE serial number <261717. ** IMPORTANT-- NOTE These bearings are for connecting rods with casting number 251246R1. Bearing measures 0.761” in width, for 1.497” journal. Replaces YTO CRK60-002, 7355273, and 355273R11. (Item #: 106436, Ref: CRK60-002) $5.80
Rod Bearing - Single rod bearing in 0.010. For Cub Lo-Boy and Cub. For C60 engine with serial number less than ENGINE serial number <261717. ** IMPORTANT-- NOTE These bearings are for connecting rods with casting number 251246R13. Bearing measures 0.761” in width, for 1.489” journal. Replaces YTO CRK60-010, 376603R91, 376604R11, and 7376604. (Item #: 106437) $5.30
Rod Bearing - Single rod bearing in 0.020. For Cub Lo-Boy and Cub. For C60 engine with serial number less than ENGINE serial number <261717. ** IMPORTANT-- NOTE These bearings are for connecting rods with casting number 251246R13. Bearing measures 0.761” in width, for 1.479” journal. Replaces YTO CRK60-020, 376606R11, and 7376606. (Item #: 106438) $7.70
Rod Bearing - Single rod bearing in 0.030. For Cub Lo-Boy and Cub. For C60 engine with serial number less than ENGINE serial number <261717. ** IMPORTANT-- NOTE These bearings are for connecting rods with casting number 251246R13. Bearing measures 0.761” in width, for 1.469” journal. Replaces YTO CRK60-030, 251254R21, and 7251254. (Item #: 106439) $11.60
No Picture Rod Bearing - Single rod bearing available in 0.010. For tractor models Cub, Cub Lo-Boy with C60 engine and rod forging # 527457R11. Standard journal measures 1.489. The bearing measures 0.661 in width. Replaces YTO CB-998P-010, 527461R11, and 527786R91. (Item #: 106441) $16.20
Rod Bearing - Single rod bearing available in 0.020. For tractor models Cub, Cub Lo-Boy with C60 engine and rod forging # 527457R11. Standard journal measures 1.479. The bearing measures 0.661 in width. Replaces YTO CB 998P-020, 527462R11, and 527787R91. (Item #: 106442) $24.80
Rod Bearing - Single rod bearing in STANDARD. For Cub Lo-Boy and Cub. For C60 engine with serial number less than ENGINE serial number <261717. ** IMPORTANT-- NOTE These bearings are for connecting rods with casting number 251246R13. Bearing measures 0.761” in width, for 1.499” standard journal. If your casting number is 527457R11, order 106440. Replaces YTO CRK60-STD, 251248R21, 367873R91, and 7251248. (Item #: 106435) $6.70

Engine Gaskets
Crankcase Front Cover Gasket - This Front Cover Gasket Fits: Cub (serial number 139517 and up), Cub Lo-Boy, 154, 184, 185; Replaces: 355945R1, 355945R2. (Item #: 179302, Ref: 355945R1) $18.10
Crankshaft Rear Oil Seal Retainer Gasket - This Crankshaft Rear Oil Seal Retainer Gasket is used on Cub, Cub Lo-Boy, U1, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces: 251364R1 (Item #: 179288, Ref: 251364R1) $9.10
Front Crankshaft Seal - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C60 (Gas and LP), C113 (Gas and LP), C123 (Gas and LP), C135 (Gas and LP), C146 (Gas and LP), C153 (Gas and LP), Replaces International OEM number 379620R92, 378193R91, 350708R1, 355769R1, 46179DC, (Item #: 106638) $14.60
No Picture Full Gasket Set - For Cub, Cub Lo-Boy with C60 Engine (Item #: 106714, Ref: FS1879X) $87.00
Gasket Set, Complete - Complete Overhaul Gasket Set For Cub Lo-Boy, Cub. For C60 Engine. Includes crankshaft seals. (Item #: 106714, Ref: GK7560S) $87.00
Gasket, Head - Fits Cub, Cub Lo-Boy with serial number below 261717. (Item #: 172561, Ref: 251229R1) $31.70
Gasket, Pan - Fits Cub, Cub Lo-Boy both with serial number below 261717. (Item #: 106697, Ref: 251369R1) $10.00
Head Gasket Set - For C60 Gas engine in: Cub, Cub Lo-Boy. (Upper gasket set with head gasket). For engine serial number 261717 and below. (Item #: 106675, Ref: VGK7560) $46.31
No Picture Rear Crankshaft Seal Retainer - For International / Farmall tractor models Cub Lo-Boy, Cub 154, Cub 184, Cub 185, Replaces International OEM number 251363R1, (Item #: 163795) $117.00
Seal, Crankshaft, Front with wear sleeve - Front Crankshaft Seal. For 100, 130, 140, 200, 230, 240, 330, 340, Super A-1, Super AV-1, Super C, Cub serial number <261717, Cub Lo-Boy serial number <261717. (Item #: 178053, Ref: 378193R91) $37.10
Seal, Crankshaft, Rear Main - Rear Main Oil Seal. Fits Cub, Cub Lo-boy, with serial number below 261717. (Item #: 106650, Ref: 364692R91) $16.10
Valve Tappet Side Cover Gasket - This Valve Tappet Side Cover Gasket is used on C60 and UC60 engines on Cub, Cub Lo-Boy, U1, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 251371R1 (Item #: 179410, Ref: 251371R1) $12.90

Engine Rebuild Kits
Valve Overhaul Kit - Fits Cub, Cub Lo-Boy (4cyl GAS-C60 CID). Kit includes Valves, Valve Springs (For Non-Roto Exhaust Valve), Valve Keys And Valve Guides. (Item #: 120326, Ref: VOKH60) $156.00

Engine Parts
Cylinder Head - Cub Cylinder Head Fits C-60 engine in: Cub &Cub Lo-Boy. Replaces 251228R11, 351779R91. (Item #: 104809, Ref: 355691R2) $271.00
Governor Spring - This Governor Spring is 1.572 inches overall length, 0.735 inch body diameter, 0.100 inch wire diameter. Fits Cub, Cub Lo-Boy. Replaces original part numbers 121709C1 and 251464R1. (Item #: 179291, Ref: 251464R1) $12.60
No Picture Governor Thrust Bearing Assembly - This 3 piece bearing assembly slides onto the governor assembly. For models cub, A, B, C, Super C, 560, Super AV, 184, AV, Bn, Cub Lo-Boy, Super A, 100, 130, 140, 154, 185, 200, 230, 240, 330, 340, 404, 424, 444, 460, 504. Also replaces 55314D. (Item #: 184444, Ref: 43481D) $52.00
Hand Crank Bracket - This new Hand Crank Bracket with Screw fits Cub, Cub Lo-Boy. Two are used per tractor, sold individually. Spring steel. Will not fit 154, 184, 185. Replaces 171573, 351013R1. (Item #: 179324, Ref: 351013R1) $9.70
Hand Starting Crank - For Cub, Cub Lo-Boy. Hand Starting Crank WITHOUT Spinner. (Item #: 111921, Ref: 351010R31) $44.70
Hand Starting Crank with Spinner - For Cub, Cub Lo-Boy. Hand Starting Crank WITH Spinner. (Item #: 126699, Ref: 351010R31-S) $72.00
No Picture Rear Crankshaft Seal Retainer - This Rear Crankshaft Seal Retainer is used on C60 4-Cylinder Gas Engines on Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 251363R1 (Item #: 251363R1) $117.30
Valve Guide - For Cub and Cub Lo-boy both with serial number below 261717. (Item #: 173452, Ref: 352973R3) $2.70
Valve Keys - For Cub and Cub Lo-boy with serial number below 261717. ``Sold per 1/2 valve, order 2 per valve (Item #: 108430, Ref: 46209D) $0.70
Valve Spring - Valve Spring without rotocap. for Models: Cub, Cub Lo-Boy, engine serial number 261717 and below using connecting rod number 251246R13. (Flat Head Piston) (Rod Bearing length.761 inch) (For Sleeveless Engines). (Item #: 173503, Ref: 251262R2) $5.40
Valve Spring, Exhaust - Used in C60 engines with Roto Cap Exhaust valves. These springs are found in some of the following: 50AW Baler, Cub 154 Lo-Boy Tractor, 185 Lo-Boy Tractor, Cub Tractor, International U1 Power, Cub Lo-Boy Tractor, 55T Baler, 55W Baler, 64 Combine, 50T Baler. Replaces OEM number 357168R1. (Item #: 185542, Ref: 357168R1) $104.00
Valve, Exhaust - For Cub, Cub Lo-Boy, engine serial number 261717 and below using connectingrRod number 251246R13. (Flat Head Piston) (Rod Bearing Length.761 inch) (For Sleeveless Engines). Springs, guides and keys available at additional cost. QUANTITY 4 REQUIRED PER ENGINE, PRICED EACH. (Item #: 128727, Ref: 251261R2) $13.90
Valve, Intake - Intake Valve for Cub, Cub Lo-Boy, engine serial number 261717 and below using connecting rod number 251246R13. (Flat Head Piston) (Rod Bearing length .761 inch) (for Sleeveless Engines). Springs, guides and keys available at additional cost. (Item #: 128521, Ref: 251260R1) $13.00

Engine Pistons and Sleeves
Piston - Raised Pistons .020, Single Cylinder - Piston for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .020 overbore. from Engine Serial Number 264568. Comes with 1 piston, piston pins and pin retainers. (Item #: 191133, Ref: R8021) $41.40
Piston Kit - Raised Pistons .030 - Pistons and Rings Kit for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .030 overbore. from Engine Serial Number 264568. Comes with 4 pistons with piston rings, piston pins and pin retainers. (Item #: 185588, Ref: R8022) $586.00
Piston Kit - Raised Pistons .040 - Pistons and Rings Kit for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .040 overbore. from Engine Serial Number 264568. Comes with 4 pistons with piston rings, piston pins and pin retainers. (Item #: R8023) $303.60
Piston Kit - Raised Pistons .060 - Pistons and Rings Kit for Cub and some Lo-Boy with C-60 standard 2 5/8 inch bore plus .060 overbore. from Engine Serial Number 264568. Comes with 4 pistons with piston rings, piston pins and pin retainers. (Item #: R8024) $303.60
Piston and Ring Set, .020 - Kit for Cub and Cub Lo-Boy up to engine serial number 264567. includes .020 size pistons, rings, piston pins and clips. (Item #: 185402, Ref: PRK60-020) $282.00

Engine Rings
Piston Ring Set - Standard. Fits C60 engine in Cub, Cub Lo-Boy. 2-5/8 inch standard bore. 2 @ 3/32 inch, 1 @ 3/16 inch. Complete set for 1 engine. (Item #: 182564, Ref: PRS60) $56.00
Piston Ring Set - .020" Oversize - Single Cylinder - For International / Farmall tractor models Cub, Cub Lo-Boy, Cub 154, Cub 184, Compatible with International Engine (s) C60, Standard Bore: 2.625", Ring Size: .020" Oversize, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, For standard use Item #: 120908, (Item #: 120905) $29.90
Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models Cub, Cub Lo-Boy, Cub 154, Cub 184, Compatible with International Engine (s) C60, Standard Bore: 2.625", Ring Size: .030" Oversize, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, For standard use Item #: 120908, (Item #: 120906) $26.90
Piston Ring Set - .060" Oversize - Single Cylinder - For International / Farmall tractor models Cub, Cub Lo-Boy, Cub 154, Cub 184, Compatible with International Engine (s) C60, Standard Bore: 2.625", Ring Size: .060" Oversize, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, For standard use Item #: 120907, (Item #: 120908) $34.10
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models Cub (engine s/n 264567-later), Cub Lo-Boy, Cub 154, Cub 184, Compatible with International Engine (s) C60, Replaces International OEM number 539354R1, Bore: 2.625", Ring Size: Standard, Top Groove Size: .094", 2nd Groove Size: .094", 3rd Groove Size: .188", Sold per cylinder, For .020" use Item #: 120908, (Item #: 120909) $29.30
No Picture Piston Ring Set, .020 - Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Item #: 185548, Ref: PRS60-020) $103.00
No Picture Piston Ring Set, .030 - Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Item #: 184944, Ref: R3378R) $93.00
No Picture Piston Ring Set, IH, .040 - For International / Farmall tractor models Cub, Cub Lo-Boy, Rings Per Cylinder: 4, 4 cylinder engine, Cylinder Set Contains: Three Piston Rings and One Oil Keeper, (Item #: 185545) $71.00
Piston Rings, .040 - Fits one cylinder on a C60 engine in Cub, Cub Lo-Boy 4 sets used per engine. Sold Individually. .040"oversize, 2 rings at 3/32 inch, 1 at 3/16 inch. Replaces 539357R1, 539357R1 (Item #: 120907, Ref: PRS60-040) $28.70

Exhaust System
Exhaust Elbow - For horizontal exhaust between manifold 251232R91 and exhaust 363116R91. Use Clamp 362361R1. For Cub and Cub Lo-Boy (Item #: 178659, Ref: 362359R1) $64.28
Exhaust Manifold Clamp - This Exhaust Manifold Clamp is for Cub and Cub Lo-Boy tractors with undersslung exhausts. Replaces 362361R1 (Item #: 126357, Ref: 362361R1) $28.00
Exhaust Pipe - For tractor models: Cub, Cub Lo-boy (Lo-boy up to serial number 248124 with upright exhaust). The pipe is 17 inches long with a 1 3/8 inch outside diameter. (Item #: 179165, Ref: 350960R1) $42.80
Muffler, Horizontal - Round body 3-1/4 inch diameter, A= 2-3/4 inch inlet length, B= 1-3/8 inch inlet inside diameter, C= 12-1/2 inch shell length, D= 6-3/4 inch outlet length, E= 1-1/2 inch outlet outside diameter, F= 22 inches overall length. For model Cub Lo-Boy. (Item #: 100799, Ref: 361116R91) $51.32
Muffler, Underslung - Restoration quality with IH logo and part number stamped on side, horizontal with galvanized finish. Exhaust pipe 1.375 inch outside diameter x 9.5 inch length, body 3 inch diameter x 10.875 inch length, intake pipe 1.313 inch inside diameter x 1-7/8 inch length. For tractor models Cub, Cub Lo-Boy. (Item #: 164532, Ref: 363116R91) $72.00

Fuel System / Air Intake
Air Cleaner Cap, Slides INTO Pipe - 3.06 inch body diameter, internal fit 1 1/4 inch outside diameter. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to serial number 355669. This cap slides INTO the pipe. Replaces: 350750R91. (Item #: 111661, Ref: R4744) $40.80
Air Cleaner Cap, Slides OVER pipe - 4 1/8 inch body diameter, external fit 1 3/8 inch inside diameter. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to serial number 355669. This cap slides OVER the pipe. (Item #: 109878, Ref: 350750R91) $45.80
Carburetor - Designed just like the original carburetor, with metal float and threaded float valve. This Cub carburetor does not come with a choke lever. If a choke lever is needed, we have one available (Part number 351324R1 sold separately). Used on: Cub, Cub Lo-Boy, and 154 using C60 Gas engine up to engine SN: 312389. It may be necessary to drill a hole in the choke shaft linkage, opposite of the choke lever, depending on application. Replaces 251234R91, 251234R92, 251234R93, 251234R94, 364579R91, and 63349C91 w/ IH on the bowl. (Item #: 111032, Ref: 364579R91) $116.00
Carburetor - Aftermarket replacement carburetor outperforms the original carburetor used on: 1974 to 1979 Cub and Cub Lo-Boy using C60 gas engine, serial number 312390 and up and 184, 185. Carburetor numbers 70949C91, 70949C92, 71523C93, 13781, 13794. Note: The replacement carburetor inlet diameter is larger than original (for more power). Air inlet is 1-5/8 inch outside diameter. Carburetor is a replacement, not like original. Center to center on the 2 mounting bolts is 1-13/16 inches. Imported, 1 year warranty. (Item #: 134630, Ref: 13794B) $224.00
Carburetor - Zenith carburetor outperforms the original carburetor used on: 1974 to 1979 Cub and Cub Lo-Boy using C60 gas engine, serial number 312390 and up and 184, 185. Carburetor numbers 70949C91, 70949C92, 71523C93, 13781, 13794. Note: The replacement carburetor inlet diameter is larger than original (for more power). Air inlet is 1-5/8 inch outside diameter. Carburetor is a replacement, not like original. Center to center on the 2 mounting bolts is 1-13/16 inches. Made in USA, 1 year warranty. (Item #: 100764, Ref: 13794) $400.00
Carburetor Float - For Cub, Lo-Boy with C60 gas engine. Carburetor Float with Lever with Original Carburetors 251234R94 or 364579R91. (Item #: 108450, Ref: 251293R1) $20.00
Carburetor Float, Zenith - This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Item #: 108454, Ref: CTP28) $16.20
Carburetor Idle Tube - This Carburetor Idle Tube is used on IH Carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91. Used between 1947 and 1974. It replaces original part numbers 251331R1, 352140R1 (Item #: 126194, Ref: 251331R1) $17.10
Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877, 14007, 13794, 13794B, and OEM 375560R91. (Item #: 183586, Ref: BK44V) $28.30
Carburetor Main Jet 035 - Carburetor Main Jet 0.035 inch (Large Throat. Cub (1957 to 1974). Replaces: 364610R91 IHS1463. Carb Manufactures number's - Carburetor's with 'IH' on float bowl: 364579R91 Brass finish --- 0.375 inch Hex x 0.940 inch long with 0.035 inch Jet. (Item #: 182685, Ref: 364610R91) $12.20
Carburetor Nozzle, 0.060 - Carburetor's with 'IH' on float bowl: 251234R91, 251234R92, 251234R93, 251234R94, 251293R91. 0.3125 inch hex x 1.777 inches long x 0.122 inch tube with 4 discharge holes. 0.060 inch hole. Replaces 352138R31. (Item #: 182694, Ref: 352138R31) $17.90
Carburetor Nozzle, 0.100 - For IH Carburetors 63349C91, 251234R94, 364579R91, 405004R91. 0.3125 inch hex x 1.777 inches long x 0.122 inch tube with 0.100 inch hole --- 6 discharge holes. Replaces original part numbers 251332R11 and 355717R11. (Item #: 182768, Ref: 251332R11) $20.80
Carburetor Throttle Shaft - This Carburetor Throttle Shaft is used on IH Carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91. Used between 1947 and 1974. It replaces original part numbers 351845R11 (Item #: 182866, Ref: 351845R11) $3.98
Choke Lever - With stainless set screw, used on Carburetors with "IH" on float bowl. For tractor models: Cub, Cub Lo-Boy. Not for 154, 184 or 185 as these used a cable and not a rod type for choke. Used with carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91, 63349C91. (Item #: 111031, Ref: 351324R1) $27.90
Choke Shaft - This Choke Shaft is used on IH Carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91, 364579R91, 63349C9, 63349C91 Replaces original part numbers 251309R12, 352562R12. (Item #: 182881, Ref: 20100) $15.70
Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. Replaces 361910R1, 23995DC (Item #: 108051, Ref: R3654) $26.00
Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Item #: 107987, Ref: 23995DC-CHROME) $2.60
Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Item #: 121475, Ref: 12770D) $12.40
Fuel Line - This steel fuel line fits Cub and Cub Lo-Boy, both with vertical or underslung exhaust using Zenith carburetors. It WILL NOT fit tractors with IH carburetors. The outside diameter on this fuel line is 5/16 inch. Note: Will not fit 154, 184, 185 or tractors with IH carburetors. Replaces: 63499C91. (Item #: 183017, Ref: 63499C91) $38.57
Fuel Line - The steel fuel line fits Cub and Cub Lo-Boy, both with vertical exhaust and using original IH carburetor only, will not fit tractors with Zenith carburetors. If your Cub is equipped with a horizontal muffler and IH carburetor, then use part number 362358R11. If you have a Zenith carburetor, use part number 63499C91. This line will not fit 154, 184, 185 or tractors with Zenith carburetors. Replaces: 350968R11 (Item #: 182478, Ref: 350968R11) $39.50
Fuel Line - The steel fuel line fits Cub and Cub Lo-Boy, both with horizontal (underslung) exhaust and using original IH carburetor only, will not fit tractors with Zenith carburetors. If your Cub is equipped with a vertical muffler and IH carburetor, then use part number 350968R11. If you have a Zenith carburetor, use part number 63499C91. This line will not fit 154, 184, 185 or tractors with Zenith carburetors. Replaces: 362358R11, 369992R11 (Item #: 182905, Ref: 362358R11) $39.80
Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $3.47
Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $3.00
Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.60
Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20
Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Item #: 105364, Ref: 49923D) $3.50
Sediment Bowl Screen - For International / Farmall tractor models A, B, C, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 240, 340, 454, 460, 464, 504, 574, 606, 656, 674, 686, 2400A, 2404, 2500A, 2504, 2606, 2656, Compatible with International Hay Cutting (s) 201, 210, 230, 275, 375, 4000, 5000, 5500, Replaces International OEM number 49923D, Diameter: 2", Diameter Hole: 1/4", For Sediment Bowl Assembly use Item #: 105370, (Item #: 105371) $3.00

Gauges
Oil Gauge, Engine Mount - For Cub, Cub Lo-Boy, Super A, AV C, Super C, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400. Oil Pressure Gauge, 0 to 75 psi. 2 inch IH logo on face. Does not come with bracket to mount in dash- screw in engine mount. Replaces: 364665R91, 393487R91, 528245R91, 536967R1 (Item #: 113562, Ref: 364665R91) $43.30
No Picture Oil Pressure Regulator Spring - For International / Farmall tractor models Cub, Cub Lo-Boy, Cub 154, Cub 185, Replaces International OEM number 251401R1, (Item #: 168850) $12.15
Tachometer Cable Connector - This new tachometer cable connector housing retainer clip (Thrust Stop) is used to retain part numbers 369695R1 (Tachometer Drive Assembly) and 369692R1 (Tachometer Cable Connector) into part number 363749R91 Distributor Housing Drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: 369693R1. (Item #: 150712, Ref: 369693R1) $4.50
Tachometer Cable Connector Housing - This New Tachometer Cable Connector Housing is used with 369695R1 Nylon gear with metal shaft. Will also need to order tach drive gear 369695R1 and 369693R1 clip for 300, 330, 350, 400, 450, 600, and 650 if replacing ALL NYLON gear/shaft drive. Fits Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 369692R1 (Item #: 150711, Ref: 369692R1) $55.00
Tachometer Connection Housing Plate - Tachometer Connection Housing Plate with gasket. Used with part number 363749R91 distributor housing. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: Plate: 363817R1, Gasket: 363814R1, 363814R2. (Item #: 150709, Ref: 363817R1) $11.00
Tachometer Drive Assembly - This new Tachometer Drive Assembly is used with part number 363763R11 cast distributor mounting housing with provision for drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. For IH distributor systems only. This part does not replace all nylon style gear/shaft number 363816R1 that was original on 300, 330, 350, 400, 450, 600, 650, unless the connector housing part number 369692R1 is ordered along with the 369693R1 clip. Replaces: 369695R1, 369695R91. (Item #: 150710, Ref: 369695R1) $60.00

Hitch / Drawbar
Drawbar Bolt - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces International OEM number 351679R1, Thread 5/8"-11 NC, Length 1-3/4" (useable length is 1"), (Item #: 126336) $8.70
Drawbar, U-Shaped - Used on Farmall Cub and Cub Lo-Boy, this U-Shaped Drawbar replaces OEM numbers 350963R3, 350963R1 (Item #: 134635) $232.00
No Picture Lower Latch Spring - Used with 393500R1 latch. Replaces OEM part number 522840RA. For tractor models 21026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Cub, Cub Lo-Boy, Hydro 100, Hydro 70, Hydro 86, 100, 1026, 1206, 130. (Item #: 128306, Ref: 522840R2) $9.20

Hydraulic System
Hydraulic Pump - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces International OEM number 352035R94, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 104247) $505.00
Hydraulic Pump Gasket, O-Ring and Seal Kit - This Hydraulic Pump Gasket, O-Ring and Seal Kit services pump numbers 352035R92, 352035R93, 352035R94, 352035R95, 355006R93, 05 1004 040-02, 05 1004 040-03, 05 1004 040-04, 05 1004 040-05, 05 1004 040-06. If you have pump number 352035R91 (Pesco 05 1004 040-01) you must also purchase a front seal number 355742R91. This 18-piece kit includes instructions. Includes jam nut and drive key that most kits do not include. Replaces 351677R1, 352034R2, 510185, 353828R1, 86977728, 252707R1, 72585739, 350667R1, 355047R1, 353827R1, 124925, 114494, 124543, 106749, 355882R1, 86637641, 252739R1, 14457080, 355199R1 (Item #: 182523, Ref: 352035R94KIT) $35.30
Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits tractor models Cub, Cub Lo-Boy; Replaces: 352024R1, 350667R1, 350684R1, 253070R1, 351989R7, 352221R1, 350658R1, 75285739, 9706714, 843092, 411205R1, 354008R93, 354008R94, 354008R95, 360713R92, 360713R91, 411205R2, 238-5324, A175513, 351989R6, 238-6326, 355966R1, 350672R1, 352034R1, 49861, 355967R1, 86505727, 461173R1, 352004R1, 13727D, 254691R1, 238-5113, 351989R4, 355967R1, 253070R1, 9672467, 86553262, 351983R1, 352034R2, 252738R1, 128999. Fits both early and late touch control blocks. Some applications may have extra O-rings and/or washers. There are 24 pieces in this gasket and O-ring kit. (Item #: 178598, Ref: IHS3027) $60.00
Touch Control Piston Sleeve Boot - This touch control piston sleeve boot fits the following tractor models: C, Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.425 inches, an overall outside diameter of 1.235 inches, a top hole diameter of 0.530 inches, and a bottom hole diameter of 0.875 inches. Replaces 351754R3, 364833R2. (Item #: 182534, Ref: 351754R3) $12.70
Touch Control Valve Boot - This touch control valve boot fits the following tractor models: Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.450 inches, an overall outside diameter of 1.500 inches, a top hole diameter of 1.755 inches, and a bottom hole diameter of 0.725 inches. Replaces Leather Boot: 351753R3, 364832R1, 364832R2. (Item #: 178168, Ref: 351753R3) $11.30

Lights
Headlight Assembly, Flat Back - 6 Volt - For Farmall Cub, Cub Lo-Boy, C, Super C after serial number 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV, also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM number 357884R94. Flat-Back (not teardrop). Primered red. Price is for one complete headlamp assembly. (Item #: 105333, Ref: 357884R91-6V) $40.50
Headlight Assembly, Flat Back, 12 Volt - For Farmall Cub, Cub Lo-Boy, C, Super C After 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV. Also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM# 357884R94. Flat-Back (not teardrop) Primered red. Price is for one complete headlamp assembly. (Item #: 105334, Ref: 357884R91-12V) $45.90
Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Item #: 111330, Ref: GC200) $15.30
No Picture Headlight Lens - For tractor models 100, 130, 140, 200, 230, 240, 300, 350, Farmall 300, 350 Utility, 330, 340, IH and Utility 240, 400, 450, Farmall Cub, Cub Lo-Boy, Farmall C, M, MV, MD, MDV, Super MD, Super MDV. (Item #: 179183, Ref: 357884R94) $15.20
Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 110589, Ref: 358892R91) $2.98
Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 185606, Ref: S.02377) $10.70
Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 112980, Ref: 53525DA) $17.20
Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Item #: 179762, Ref: 359773R91) $8.72
Light Bracket - For tractor models Cub, Cub Lo-Boy. Rear light bracket. (Item #: 126621, Ref: 352121R11) $32.20
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10
Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Item #: 178025, Ref: 350920R1) $10.00
Light Ring - The dimensions of this light ring with screw are 4.5 inches and 0.885 inches in width. For the following: Cub Lo-Boy serial number 10001 and up - (WILL NOT FIT 154, 184, 185) Cub serial number 210001 and up, ( 460, 560, 660 tail light only) Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676 (Item #: 154743, Ref: 371449R91) $23.40
Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Item #: 111938, Ref: 358890R92-6V) $40.00
Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Item #: 161211, Ref: 358890R92-12V) $62.00
Sealed Beam Bulb, Red and White - 4.5 inch diameter, 12 volt. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Item #: 116014, Ref: 371461R92) $24.20
Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Item #: 125705, Ref: 376851R91) $30.20
Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Item #: 185566, Ref: 375653R92) $18.40
Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A.350478R1 (Item #: 111330, Ref: GC200) $15.30

Oil System
Oil Filter Element Type - For tractor models Cub, Cub Lo-Boy ALL with 60 GAS ENGINE. Overall length of 4 1/2 inches, diameter of 2 1/4 inches. (Item #: 111118, Ref: 376373R91) $11.60

PTO / Driveline
Belt Pulley Output Shaft Seal - This belt pulley output shaft seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: Cub, Cub Lo-Boy. Replaces: 351276R91, 358775R91, 358804R91, 358815R91, 358838R91, 382230R91, 383333R91, 47703D, 530098R91, 65418C1 (Item #: 169955, Ref: 471765) $9.10
PTO Bearing Kit - Fits Cub, Cub Lo-Boy. Replaces: Ball bearing: A31260, snap ring: 369875R1, 69696D, (Subs for 351271R91) lip seal: 126107C1. DOES NOT FIT 154, 184, 185 (Item #: 109594, Ref: IHS007BK) $53.58
No Picture PTO Seal - For Cub, Cub Lo-Boy (not 154, 184, 185). 1.125" I.D., 1.875" O.D., 0.250" wide - may be narrower than original, can use two . (Item #: 173616, Ref: 126107C1) $9.40
PTO Shaft - For Cub, Cub Lo-Boy. PTO Shaft 11.54 inch long. Replaces: 351269R11, 351269R21, 351269R4, 368433R91. (Item #: 112201, Ref: 351269R4) $77.00
PTO Shaft Front Ball Bearing with Collar - For International / Farmall tractor models Cub (185), Cub Lo-Boy, Cub 154, Cub 185, Replaces International OEM number 491590R91, 49165R91, 531274R91, 531274R92, 531274R94, (Item #: 125633) $41.10
PTO Shift Collar - For Cub, Cub Lo-Boy. Collar has 6 spline, spline diameter of 13/16 inches, outside diameter 1 7/8 inches, and length of 1 3/8 inches. (Item #: 125647, Ref: 351286R2) $57.00
PTO Shift Lever Guide - For tractor models Cub, Cub Lo-Boy. (Item #: 125648, Ref: 351967R1) $10.90
PTO Shift Lever and Shaft - Replaces 351287R11 shaft, 351970R31 lever, 351968R1 collar and 351969R1 spring. For tractor models Cub, Cub Lo-Boy. (Item #: 132675, Ref: 351287R11) $41.70
PTO Shifter Rod Assembly - For tractor models Cub, Cub Lo-Boy. (Item #: 172761, Ref: 351970R31) $51.00