International Harvester / Farmall Hydro 86 Parts

[Categories]   [All Farmall Models]   [Print]  

Belts
Belt - Generator / Water Pump - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Alternator), Compatible with International Combine (s) 715, Replaces International OEM number 403617R1, All gas engines, (Item #: 123133) $10.00

Brakes
Brake Actuating Assembly, Used - For International tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, For a new version of this item use Item #: 105442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405442) $97.01
Brake Actuating Spring - Used with disc brakes. For tractor models (M from serial number 294226 and up), (MD from serial number 285505 and up), Super M, Super MTA, Super MV, Super MDV, Super W6, Super W6TA, Super WD6, OS6, ODS6, 400, 450, W400, W450, 560, 656, 660, 664, 666, 686, Hydro 70, Hydro 86. Replaces A30897, A41816. Replaces 357116R1, 619731C1, 72504717V. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Item #: 113798, Ref: A155624) $1.70
Brake Actuator Assembly - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391446R91, (Item #: 105442) $169.00
Brake Disc - 6.50 inch outside diameter, 3.50 inch inside diameter, 1.84 inch spline diameter, 10 spline. For tractor models 2656, 656, 664, 666, 686, Hydro 70, Hydro 86. Replaces 391445R91, 1975463C3. (Item #: 105449, Ref: 1975463C2) $20.50
Brake Disc Kit - Contains 1 o-ring kit, 6 friction discs, and 7 steel separator discs. For tractor models 1086, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, 6788, 786, 886, 986, Hydro 86. (Item #: 110131, Ref: 120235C94) $160.00
Brake Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 664, 666, 686, 2656, Replaces International OEM number 391445, 830617, 619731, Kit Includes 2 Brake Discs, 5 Steel Balls, 3 Brake Springs, (Item #: 162744) $69.00
Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $13.50
No Picture Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $114.00
Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $15.50
Disc Brake Boot - For tractor models 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 70, Hydro 86, 2544, 2606, 2656. (Item #: 112346, Ref: 368299R1) $9.50

Cooling System
Belt - Generator / Water Pump - Outside diameter 47.77 inches, 1/2 inch v-belt. Replaces 403617R1, 372596R1, 393415R1, L71058. Used on the following gas tractors: Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Item #: 173491, Ref: 310050) $10.30
Fan Shroud, Used - For International tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 2706, 2756, Replaces International OEM nos 396356R1, Fits Farmall tractor models 706, 756, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431147) $128.01
Radiator - Core size 20.375 inches high, 20.00 inches wide. For tractor models (666, 686, Hydro 70, Hydro 86 all with diesel engine). (Item #: 101722, Ref: 65427C1) $566.00
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.60
Radiator, Premium Used - For International tractor models Hydro 70, Hydro 86, 544, 666 (s/n 10552-later), 686, 706 (s/n 37237-later), 756, 766, 2544, 2756 (all Gas), Replaces International OEM number 65426C1, 396351R1, 403649R1, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101717, Additional Handling and Oversize Fees Apply To This Item, (Item #: 300304) $327.01
Water Pump - For diesel: Hydro, 686, 86, 706, 756, 2076, 715 serial number 23001 and up, Cotton Harvester 1400, 782 Cotton Picker, 786, 826, 886 serial number 14472 and up, 2826, 3088, 3288, 1420, 1400, 782. Water pump with hub installed, gasket included. (Item #: 100793, Ref: 3132676R93) $77.00
Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $88.00
No Picture Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30
Water Pump Pulley - Used with 601816C92 water pump. For tractor models Hydro 70, Hydro 86, 2606, 2656, 2706, 2756, 403, 460, 560, 606, 656, 660, 666, 706, 756, 766, 806, 826, 856. (Item #: 167558, Ref: 395815R2) $58.00
Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01
Water Pump, Remanufactured, 673623C92, 675806C3 - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 666, 686, 766, 826, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 815, 1440, Replaces International OEM number 673623C92, 1928145C1, 673623C91, 673623C93, 7449909C91, Replaces International Casting number 675806C3, 675806C1, 675806C2, 677856C2, Includes mounting gasket, 4 Fin Impeller, With hub, (Item #: 205226) $103.01
Water Pump, Remanufactured, 746170C91, 318118R2 - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 2656, Compatible with International Combine (s) 615, Replaces International OEM number 746170C91, Replaces International Casting number 318118R2, 169204R1, 303394R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, With Press On Pulley, (Item #: 205079) $111.01

Decals and Emblems
Grille Emblem - For International / Farmall tractor models Cub (184), Hydro 70, Hydro 86, Hydro 100, Hydro 186, 140, 240, 340, 404, 424, 444, 544, 606, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2400A, 2500A, Replaces International OEM number 368523R4, Height:3-3/8", Made of die cast metal, (Item #: 108482) $51.00
Hood Ornament, Black Plastic - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100, Hydro 186. (Item #: 108485, Ref: 538005R1) $13.50
Hood Ornament, Die Cast, Chrome Plated - For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100, Hydro 186. Replaces 538005R1 (Item #: 121573, Ref: 538005R1CH) $20.50
International Farmall Decal Set, Hydro White and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, Replaces International OEM number 528296R1, Set of 2, Black and White, (Item #: 101003) $23.70
International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.10

Drive Train
Gear Shift, Torque Amplifier, Forward, Reverse Knob - For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Item #: 111042, Ref: 388180R2) $14.70
Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Hand Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, (Item #: 200264) $7280.01
No Picture Hydrostatic Transmission, Remanufactured, 401167R - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686 (With Foot Throttle Control), Replaces International OEM number 401167R, Must Specify With Or Without 3 Point, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 205088) $8100.01
PTO Shaft 540 RPM - For International / Farmall tractor models Hydro 70, Hydro 86, 544 (w/ Independent Live PTO), 656 (w/ Independent Live PTO), 664 (w/ Independent Live PTO), 666, 686, 2544 (w/ Independent Live PTO), 2656 (w/ Independent Live PTO), Replaces International OEM number 389132R2, 71260C1, 389132C1, Tooth Front Splines: 17, Length: 11.963", (Item #: 128493) $240.00
Shift Fork, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388172R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441395) $117.01

Electrical System
Alternator - 12 volt, 61 amp. For tractor models 580 Super D, 580 Super E, 580D, 2090, 2290, 2390, 2590, 2094, 2294, 2394, (2470 serial number 8762940 to 8825000 and 8826412 and up), 2590, 2594, 3294, (1070 serial number 8675001 and up), 1270, 1370, 1570, 2670, (970 serial number 8816812 to 8817164 and 8817283 and up), 480C, 480D, 480LL, 580C, 2500A, 464, 574, 674, 4166, 4186, 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 886, 986, 3088, 3288, 3688, 3688HC, 5088, 5288, 5488, (Cub serial number 248125 and up), Cub 184, Cub 184 Lo-Boy, Hydro 70, Hydro 86, 666, 686, (815, 915 serial number 8001 and up), Hydro 186, Hydro 3488, 786. Replaces A46932, A46938, A47044, A47057, A47623, A47625, TY6600, 1102920, 1103160, 1103184, 1105164, 1105178, 1105514, 1105574, 20-7101161. (Item #: 110572, Ref: ADR0133) $116.00
Battery Cover - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 2544, 2656, Replaces International OEM number 388219R1, 538585R2, 538585R1, Does not fit utility models, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 104019) $77.00
Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $15.00
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90
Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.80
Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $11.10
Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $11.10
Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $14.30
Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $29.30
No Picture Starter - Delco (4271, 4282) - For International / Farmall tractor models Hydro 70 (Gas), Hydro 86 (Gas), 504 (s/n: 15261-later, Farmal Diesel), 504 (s/n: 17830-later, Diesel), 544 (Hydro, Gas), 656 (Hydro, Gas, Late s/n), 656 (s/n: 36467-later, Hydro, Farmal, Gas), 666 (Hydro, Gas), 3616 (1967-70, Diesel), Compatible with International Construction and industrial models 2504 (s/n: 15261-later, Diesel), 2504 (s/n: 17830-later, Diesel), 3514 (1967-69, Diesel), 3514 (1970-71, C173 Hydro, Gas), Replaces Case IH OEM number 369459R93, 396459R91, Replaces Delco Remy manufacturer number 1107854, 1107855, 1998496, 323-691, Replaces Starter number 4271, 4282, Lester 4271, 4282, Volts: 12, Rotation: Counter Clockwise (CC), Direct Drive, Teeth: 10, (Item #: 189419) $421.00
Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.20
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $12.50
Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70

Engine Bearings
Camshaft Bearing Set - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D414, DT414, D436, DT436, DT466, Replaces International OEM number 680117C3, 680117C1, Sold as complete set, (Item #: 106672) $23.90
Connecting Rod Bearing - .010" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681315C3, Sold per journal, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106499) $12.00
Connecting Rod Bearing - .010" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 376666R11, Sold in complete sets, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106497, (Item #: 106495) $140.00
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 687382C3, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106500) $12.50
Connecting Rod Bearing - .020" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3056879R11, Sold in complete sets, Bearing Size: .020" Oversize, 1.264" width, RH notch, For Standard connecting rod bearing use Item #: 106497, (Item #: 106496) $155.00
Connecting Rod Bearing - .030" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681316C3, 1823858C91, Sold per journal, Bearing Size: .030" Oversize, For Standard connecting rod bearing use Item #: 106546, (Item #: 106545) $12.80
Connecting Rod Bearing - .030" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3055781R11, Sold in complete sets, Bearing Size: .030" Oversize, 1.264" width, RH notch, For Standard connecting rod bearing use Item #: 106496, (Item #: 106497) $2.98
Connecting Rod Bearing - .040" Oversize - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Sold per journal, Bearing Size: .040" Oversize, For Standard connecting rod bearing use Item #: 106545, (Item #: 106546) $21.30
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D361, DT361, D407, DT407, D414, DT414, D436, DT436, DT466, Replaces International OEM number 681314C3, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106546, (Item #: 106498) $12.20
Connecting Rod Bearing - Standard - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3055351R91, Sold in complete sets, Bearing Size: Standard, 1.264" width, RH notch, For .010" connecting rod bearing use Item #: 106497, (Item #: 106494) $208.00
Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $195.00
Main Bearing Set - For tractor models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 Chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). If other than standard, specify size in comments (.010, .020). (Item #: MBK310D) $142.00
Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $193.00
Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $124.00
Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $110.00
Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $122.00
Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $222.00
Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $88.00
Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $113.00
Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $99.00
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 382360R91, 332276R91, 376670R91, 376673R91, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106619, (Item #: 106617) $108.00
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106623, (Item #: 106621) $113.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 376683R91, 332279R91, 376686R91, 376692R91, 382361R91, Sold in complete set, Bearing Size: .020" oversize, For Standard main bearing use Item #: 106619, (Item #: 106618) $131.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106623, (Item #: 106622) $187.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 382358R91, 332270R91, 367288R91, 367291R91, 367297R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106618, (Item #: 106619) $42.40
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106622, (Item #: 106623) $96.98
Main Bearings - Standard - Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312 (diesel), D360 (diesel), Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106623, (Item #: 106620) $137.00
PTO Clutch Pack, Heavy Duty - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 756, 766, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 2756, 2856, 3388, 4166, 4186, Replaces International OEM number 68802C91, 381490R4, 381489R3, Includes (10) One Sided Friction Drive Plates, (2) Steel Sealing Rings, (Item #: 169792) $175.00
Rod Bearing - Rod Bearing in .002. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.372 inches. Replaces YTO CRK221-002 and 367632R11. Sold individually. (Item #: 106486) $12.20
Rod Bearing - Rod Bearing in 0.010. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.364 inches. Replaces YTO CRK221-010 and 376666R11. Sold individually. (Item #: 106487) $7.40
Rod Bearing - Rod Bearing in .020. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.354 inches. Replaces YTO CRK221-020 and 376668R11. Sold individually. (Item #: 106488) $9.80
Rod Bearing - Rod Bearing in .030. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.344 inches. Replaces YTO CRK221-030 and 367631R11. Sold individually. (Item #: 106489) $12.20
Rod Bearing - Rod Bearing in standard. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Standard journal measures 2.374 inches. Replaces YTO CRK221-STD and 367408R11. Sold individually. (Item #: 106485) $13.20
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $8.80

Engine Gaskets
Front Crank Seal - This front crankshaft oil seal has a 3 inch Inside Diameter, a 4 inch Outside Diameter and is .5 inch wide. It Fits: 1440, 1460, 1470, 1480, 1640, 1660, 1680, 453, 815, 915, 1822 (diesels up to SN: JJC0012690), 1844 (diesels up to SN: JJ0002462), 515, H60E, H65C, S10, S8A, S9B, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 666, 6788, 686, 7288, 7488, 766, 966, 986, 886, E200, E412, E412B. Replaces: 690437C91 (Item #: 106647, Ref: 690437C91) $12.98
Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.20
Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $160.00
Gasket Set - Lower - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886 (chassis s/n 14472-later), 955, 956, 1055, 1056, 2706, 2756, 2826, 3088 (s/n 121247-earlier), 3288 (s/n 111090-earlier), Compatible with International Engine (s) D310, D358, Replaces International OEM number 1967013C1, 3136817R99, 1967012C1, (Item #: 160290) $99.00
Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94
Lower Gasket Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Replaces International OEM number 1967012C1, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Engines: D310, D358, (Item #: 106728) $100.00
Oil Pan Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312, D360, Replaces International OEM number 671825C2, Oil Pan Gasket Only, (Item #: 106708) $23.00
No Picture Overhaul Gasket Set with Crankshaft Seals - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Compatible with International Engine (s) D312, D360, D360 (Turbocharged), Set includes: head gasket set, conversion gasket set, oil pan gasket, and crankshaft seals with sleeves, (Item #: 191077) $401.00
Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $16.30
Rear Crank Seal Diesel - For the Following engines: D327-4, TD327-3, DT268 Turbo Diesel, D155 Diesel, D179 CID, D206 CID, D226-B6, D226-3, D226-4, D226-6, D227-4, D227-6, D239 CID, D246 Diesel, D268 Diesel, D310 CID, D325-2, D325-3, D327-2, D327-3, D358 CID, TD226-B6, TD226-4, and TD228-6. Inside diameter 110mm, Outside diameter 130mm, Width 12.7mm. Does not include wear sleeve. Order RP301113 if wear sleeve is need. Replaces 7701021418, 6005605198, 3138701R91, X550174902000, 89965016008 (Item #: 106657, Ref: 3138701R91) $21.20
Rear Crank Wear Sleeve - This Rear Crankshaft Seal is used for 110mm rear crankshafts on: D155 Diesel Engine, D179 Diesel Engine, D206 Diesel Engine, D239 Diesel Engine, D246 Diesel Engine, DT268 Diesel Engine, D310 Diesel Engine, D358 Diesel Engine. Used with 3138701R91 Seal (not included). (Item #: 106658, Ref: RP301113) $150.00
No Picture Rear Crankshaft Seal and Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, 2856, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, 21026, 21206, 21256, 21456, Compatible with International Combine (s) 815 (s/n 8000-earlier), 915 (s/n 2349-earlier), 1440, 1460, 1480 (s/n 24000-earlier), Compatible with International Construction and industrial models TD15B, 175, Neoprene style, (Item #: 176971) $140.00
Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $10.50
Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 826, 886, Compatible with International Engine (s) D312, Replaces International OEM number 675389C1, (Item #: 158262) $16.50

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - C291 Gas - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (3-3/4 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. Note: For engines with bore classification markings 1 or 2. Crankcase bore classifications are stamped on top of filter base mounting pad. ENGINE BEARINGS AND PIN BUSHINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130609, Ref: BEKH1189-LCB) $600.00
Basic Engine Overhaul Kit, Less Bearings - D310 Diesel - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings (3-7/8 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130611, Ref: BEKH6310D-LCB) $775.00
No Picture Basic In-Frame Engine Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189592, Ref: BIFH1189) $561.00
No Picture Basic In-Frame Engine Kit - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189599, Ref: BIFH6310D) $710.00
Cylinder Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Compatible with International Engine (s) D312 (6 Cylinder Diesel), Replaces International OEM number 671513C95, (Item #: 166503) $151.00
Cylinder Kit - "Dominator" - For International / Farmall tractor models Hydro 86, 385, 584, 585, 686, 706, 756, 2500, 2500A, 2500B, 2706, 2756, Compatible with International Engine (s) D155, D206, D310, Replaces International OEM number 3228771R91, (Item #: 128732) $131.00
Cylinder Sleeve - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, Compatible with International Combine (s) 453, Compatible with International Engine (s) D312, D360, Replaces International OEM number A77691, 675356C2, Bore: 3.875", (Item #: 156084) $70.00
No Picture Engine Overhaul Kit, Less Bearings - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1189-LCB) $1043.00
Engine Overhaul Kit, Less Bearings - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. Kit is also available with .010 and .020 bearings. Call for price. (Item #: EOK6310D-LCB) $1415.67
Engine Rebuild Kit - Less Bearings, D312 - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, Compatible with International Engine (s) D312 (diesel), Bore: 3.875", Stroke: 4.410", Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106623, (Item #: 130610) $1129.01
Rear Main Seal Sleeve and Seal Installer - Used to install both the seal and sleeve at the same time, this tool is used with 106660 Seal and Sleeve set. (Item #: 122044) $263.00
Valve Overhaul Kit - D310 and D358 Diesel - For tractor models 686, 706, 756, 2706, 2756, Hydro 86, 786, 826, 886 (chassis serial number 14472 and up), 2826, 3088, 3288. For 6 cylinder D310 and D358 Diesel. Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH358) $524.33

Engine Parts
Bull Pinion and Brake Shaft, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM nos 388285R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441505) $245.01
Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $286.00
Camshaft Gear, Used - For International tractor models Hydro 70, Hydro 86, 340, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666, 674, 686, 756, 766, 806, 826, 856, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Combine(s) 315, 403, 503, 615, 715, Compatible with International Harvester(s) 414, 420, 616, 622, Compatible with International Hay Cutting(s) 375, Replaces International OEM number 312500R1, 367240R1, Teeth: 54, For a new version of this item use Item #: 121567, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435782) $97.01
No Picture Camshaft, Remanufactured, 675625C91 - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Replaces International OEM number 675625C91, (Item #: 207148) $660.01
Connecting Rod Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Compatible with International Engine (s) D312, D360, D414, DT414, D436, DT436, DT466, Replaces International OEM number 676679C2, (Item #: 128743) $5.90
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Crankshaft Damper Pulley - This is a 3 spoke pulley/dampener. For tractor models 1066, 1086, 1440, 1460, 1480, 3488, 3588, 3688, 4166, 4186, 5088, 6588, 666, 686, 766, 815, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. All with DT-414, DT436, D-312 or D-360 engines. It measures: 10.203 inch outside diameter, 2.125 inch center hole and 2.61 inches wide. Replaces 680275C92. (Item #: 112099, Ref: 680275C92) $283.00
Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30
No Picture Cylinder Head, Remanufactured, 378240R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 378240R, Casting No. 378240R, Engines C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205503) $1100.01
No Picture Cylinder Head, Remanufactured, 380938R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Casting No. 380938R, 382099R, Engine C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205502) $660.01
No Picture Cylinder Head, Remanufactured, 387972R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 387972R, 383666R, 387718R, Engine C-221, C-263, C-291, Cylinders 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200211) $1225.01
Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205502, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405502) $332.01
Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 387718R, 383666R, 387972R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200211, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400211) $315.01
No Picture Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $5.00
Piston Pin Bushing - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, Compatible with International Combine (s) 453, Compatible with International Engine (s) D312, D360, Replaces International OEM number 675899C1, (Item #: 160343) $16.30
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.90
Timing Gear, Camshaft - 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 185488, Ref: 675600C1) $72.00
No Picture Timing Gear, Crankshaft - 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, and DT466. (Item #: 155745, Ref: 675406C1) $184.00
Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $57.00
Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.70
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.70
Valve Train Kit - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 766, 886, Engines: D312, D360 Diesel, (Item #: 120321) $285.00
Valve, Exhaust - Price shown is for (1) exhaust valve. Stellite Faced Valve. Fits models: 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 128502, Ref: 372699R3) $25.00
Valve, Exhaust - Exhaust valve for models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 Chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 128731, Ref: 3055056R2) $10.98
Valve, Intake - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 191128, Ref: 234276R1) $16.50
Valve, Intake - Intake Valves sold each. Please verify the number of valves needed for your engine. Some engines require 3, 4 or 6 Intake Valves. Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 128730, Ref: 3055055R2) $15.60

Engine Pistons and Sleeves
Sleeve and Piston Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Sleeves, pistons and rings, pins and retainers. For 3-3/4 inch standard bore. Kit contents for 1 engine. (Item #: 184188, Ref: PK189) $795.00
Sleeve and Piston Kit - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-7/8 inch standard bore. (Item #: PK6310D) $765.27
Sleeve and Piston Set - Used on C291 gas engines, Contains sleeve, stepped head piston, rings, pin and retainer for one cylinder. For 3-3/4 inch standard bore. (Item #: 395356R93) $67.04

Engine Rings
No Picture Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 2826, 3088, 3288 (all diesel), Compatible with International Engine (s) D310, D358, Bore Size: 3.875", Ring Size: Standard, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as a complete 6 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120853, (Item #: 174213) $264.00
No Picture Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - Standard - Single Cylinder use Item #: 120867, (Item #: 174316) $145.00
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Piston Ring Set - Standard - 6 Cylinder use Item #: 174316, (Item #: 120867) $26.30

Exhaust System
Exhaust Manifold Nut - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682987C1, Replaces Case IH OEM number 63460D, 43715D, (Item #: 168629) $2.10
Exhaust Manifold Pipe - 2 1/2 inch inside diameter x 2 15/16 inch outside diameter x 18 used with 384290R1 manifold. For tractor models 460, 560, 606, 660, 686, 656, 666, 706, 756, 766, 806, 826, 2826, 2856, Hydro 70, Hydro 86, 856. (Item #: 113422, Ref: 383974R2_) $32.40
Exhaust Manifold Stud - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682840C1, 63459D, (Item #: 168630) $5.37
No Picture Extension - For International / Farmall tractor models Hydro 70 (Hydrostatic Drive, 1/74-12/77), Hydro 86 (Hydrostatic Drive, 1/74-12/77), Hydro 100, 656 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/68-12/83), 966 (Diesel, 1/71-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), Compatible with International Engine (s) D361 (6-cylinder, Diesel), DT361 (6-ctlinder, Turbo Diesel), D407 (6-cylinder, Diesel), DT407 (6-ctlinder, Turbo Diesel), Replaces International OEM number 527703R1, (Item #: 166178) $58.00
Intake Manifold Pilot - Ferrule - For International / Farmall tractor models Hydro 70, Hydro 86, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2806, 2826, Compatible with International Harvester (s) 414, 420, 616, 622, Replaces International OEM number 138733R1, 1.630" Step, 1.690" Outside Diameter, (Item #: 167365) $23.80
Manifold - For International / Farmall tractor models Hydro 70, Hydro 86, 606 (use pipe adapter125212), 656 (use pipe adapter 125217), 666, 686, 706, 756, 766, 806, 826, 856, Replaces International OEM number 367281R1, 384290R2, 85699R1, Engines: C221 (use pipe adapter 125212), C263 (use pipe adapter 125212), C282, C291, C301, Completely assembled 2-piece assembly contains OEM heat spring, 2-1/2" NPT threaded pipe outlet, Application information, This completely assembled 2-piece intake and exhaust manifold is easier to install! Our 121565 2-piece manifold with heat spring eliminates the need to match the flanges of a used manifold to half of a new manifold, Please order 113422 exhaust pipe unless you have a 460, 560, 606, 660, 2606 or 3616, If you have a 460, 560, 606, 660, 2606 or 3616, then you need an exhaust adapter. Please view: 125212 adapter. This adapter offsets the exhaust hole to align with the hood of the tractor and also steps down the pipe diameter to 2" NPT. These tractors use 126744 exhaust pipe, If you have a 656 or 2656, then you can use the 113422 exhaust pipe, however the exhaust pipe is not perfectly centered on the exhaust hole in the hood. Also, you need to have the inlet pipe on the muffler expanded to accommodate this larger diameter pipe or you need to purchase 100824 muffler, If you need to adjust the pendulum (121566) on the intake manifold, please use a Torx T8 screwdriver or bit, (Item #: 121565) $500.00
Manifold - This Manifold for gas intake with heat valve assembly is for models 460, 560, 656, 666, 706, 756, 806, 826, 856, 2756, 2826, 2856, Hydro 70, Hydro 86. Replaces OEM number 393705R11. (Item #: 101554, Ref: R2661) $221.00
No Picture Manifold Gasket Set - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 eng. (Item #: 101555, Ref: R0057G) $27.50
Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.50
Manifold, Exhaust - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 Gas Engines. This also fits 460, 560, 606, 656, 660 if you cut the hole in the hood larger, or if you use R0057A offset adapter. Gasket set is R0057G, If needed please add to your order. (Item #: 101556, Ref: 384290R1) $234.00
Manifold, Intake - This Intake manifold is for tractor models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2826, 2856, Hydro 70, Hydro 86 all with C263 or C291 gas engines. MIncludes Heat Valve Assembly. Replaces 367261R11 383705R11, IHS154. (Item #: 101554, Ref: 393705R11) $221.00
Muffler - Vertical Exhaust inlet inside diameter 2 15/16 inches, outlet outside diameter 3 inches, overall length 34 inches. For 666, 686, 706, 766, Hydro 70, Hydro 86 with C263 or C291 Gas Engines, 706 with D310 Diesel Engine, 806 with C301 Gas or D361 Diesel, 826, 856 with C301 Gas Engine, 856 with D407 Diesel Engine. OEM numbers 570578R3, 530578R4 use R1756 clamp, use R1805 rain cap. (Item #: 100824, Ref: R1650) $126.00

Fuel System / Air Intake
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262) $6.30
Fuel Filter / Spin On - For tractor models 385, 454, 484, 544, 574, 664, 674, 684, 685XL, 686, 706, 756, 785, 786, 826, 884, Hydro 86, 2400, 2500, 3088, 3288. (Item #: 125844, Ref: 3132428R2) $18.50
Fuel Injection Pump, Remanufactured, Ambac, 6A-100A-9238-5, 684528 - For International / Farmall tractor models Hydro 70 (D312), Hydro 86 (D312), 666 (D312), Replaces International OEM number 684528, 680-346, 984-2, 684-528, 749-023, 749023, 680346, Replaces Ambac manufacturer number 6A-100A-9238-5, 6A-100A-9265-2, (Item #: 200765) $1585.01
Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $32.20
Fuel Injector, Remanufactured, 631570C91, 675960C91 - For International / Farmall tractor models Hydro 86 (Using D312 engine), 666 (Using D312 engine), 686 (Using D312 engine), 766 (Using D360 engine), Replaces International OEM number 631570C91, 675960C91, (Item #: 207291) $93.01
Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $45.00
Fuel Solenoid - For International / Farmall tractor models Hydro 70, Hydro 86, 350, 444, 454, 464, 504, 544, 574, 666, 674, 686, 2400A, 2504, 2544, Compatible with International Construction and industrial models 2400A, 2504, 3400A, 3500A, 3514, Compatible with International Engine (s) C153, C175, C200, C291, Replaces International OEM number 386015R91, 396739R91, 396739R92, 396739R93, 530184R1, 71358C2, 71358C91, 71358C92., For Marvel Schebler carburetors only, not for International carburetors, (Item #: 111797) $175.00
Injector - For tractor models 2706, 2756, 686, 756, Hydro 86, (706 with D310 engine). Replaces 3055422R93. Add $30.00 for core charge. (Item #: 207255, Ref: 735252C91) $122.01
Insulating Fuel Tank Pad - For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel), Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel), Replaces Case IH OEM number 60671D, (Item #: 163917) $3.10
Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 218349A1, 162000090701, A77616, 3112805R91, K928523, 3118299R1 (Item #: 118792, Ref: 3583543M2) $11.80
Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $6.80

Gauges
Fuel Gauge - For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Item #: 121190, Ref: 533992R1) $40.60
Fuel Sending Unit - This fuel sending unit includes a seal. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. Compatible with Ethanol blend to 15%. 32-244 Ohm. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94EB) $45.00
Fuel Sending Unit - This Sending unit operates from 32 Ohm full to 244 Ohm empty. It will not work work with 0-70 Ohm fuel gauges. It is for 12 volt systems. Use with Stewart Warner Fuel Gauges like 533992R1. Replaces: 378427R91, 84203050 (Item #: 107954, Ref: 378427R91) $45.00
Sending Unit Gasket - The dimensions of this rubberized cork gasket are:1.715 inch inner diameter, 2.850 inch outside diameter, 0.191 inch thick, and there are five (5) ¼ inch screw holes. Replaces 1015335M1, 101611A, 10A29269, 10A7362, 10A9818, 158046A, 189605M1, 189605M2, 189605M3, 239789, 241522, 29-12, 30-3048772, 369154R1, 70140C1, 70239789, 70241522, A11822, A61161, F2418R, R27181 (Item #: 165414, Ref: 189605M1) $3.00
Speedometer Cable - This Speedometer / Tachometer cable is used on Hydro 70, Hydro 86, 544, 656, 666, 354, 434, 364 tractors. It measures 45-1/8 inches long. Both ends have 5/8 - 18 fittings. Replaces 3068984R91, 3068984R92, 398955R91, 398955R92, 398955R93 (Item #: 122467, Ref: 3068984R91) $38.20
No Picture Tachometer Cable - Overall Length 57.5 inches. For tractor Models: 2500A gas, 2706 gas, 2756 gas, 2806 gas, 2826 gas hydro, 2856 gas, Hydro 70 gas, Hydro 86 gas, 385 diesel, 484 diesel, 485 diesel, 544 gas, 573 diesel, 584 diesel, 585 diesel, 656 gas and diesel, 666 gas, 674 diesel, 684 diesel, 685 diesel, 686 gas, 706 gas, 756 gas, 766 gas, 784 diesel, 785 diesel, 806 gas, 826 gas hydro, 844 diesel, 856 gas, 885 diesel. (Item #: 111325, Ref: 1970820C1) $27.74
Tachometer Cable - Used on International models" Hydro 70, Hydro 86, Hydro 100, 666 (Gear Drive), 766, 786, 806, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 2806, 2856, 3088, 3288, 3688, 4166, 4186, 4366, 21026, 21256, 21456. This cable measures 80 inches. 5/8 - 18 thres on one side, 7/8 - 18 thread on the opposite. Squared ends. Replaces International OEM nos 393328R93, 384845R92, 387916R91, 393328R92, 393328R91 (Item #: 107953) $28.40
Tachometer Cable - For International / Farmall tractor models Hydro 70, Hydro 86, 666 (Gear Drive), 686 (Gear Drive), Replaces International OEM number 65325C93, Length: 76", Load End:, Drive End:, (Item #: 121532) $41.50
Tachometer Drive Assembly, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1568, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788, Compatible with International Engine(s) D312, D360, D414, DT414, D436, D466, DT436, DT466, DT466B, DTI466, DTI466B, DTI466C, Replaces International OEM nos 671806C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498057) $70.01
Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $64.58
Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85

Hitch / Drawbar
Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.40
Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $15.80
Drawbar Support Casting - Used with 1 piece drawbar. For tractor models 1026, 706, 756, 766, 826, 856, 966, Hydro 86. Replaces 72392C1. 10.250 inches high. Plate 1 inch x 3.5 inch x 16.5 inch. (Item #: 109485, Ref: 383385R3) $278.00
Drawbar Support Casting - Used on tractors with Three Point Hitches, this part measures 1 inch X 3-1/2 inches X 16.00 inches. It is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. Replaces 389360R1. (Item #: 108818, Ref: 389360R1) $402.00
Drawbar, Front Tube - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, Replaces International OEM number 389100R11, Tube length: 25.50", (Item #: 170028) $258.00
Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $114.00
Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $32.90
Inner Pipe - Associate parts for this Inner Pipe are 384852R1 Pin, 389369R1 Yoke, 389370R11, Lockout pin, 400836R1 Clevis. It is used on International models Hydro 70, Hydro 86, 544 (1/1966 - 12/1973), 656 (1/1966 - 12/1973), 664 (1/1972 - 1/1973), 666 (1/1972 - 1/1973), 686 (1/1969 - 12/1971), 2544 (Diesel), 2656 (1/1963 - 12/1971). Replaces 400835R1 (Item #: 108821, Ref: 400835R1) $64.00
Lateral Limiter Clevis - Used in association with 384852R1 Pin, 389369R1 Yoke, 389370R11 Lockout pin and 400835R1 Inner pipe, this Three Point Lateral Limiter Clevis measures 7.310 inches long. It is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108851, Ref: 400836R1) $173.00
Leveling Assembly Kit - Consisting of one each of the following, 523861R2 handle, 223315 duckhead, 389542R11 screw, 538970 (housing 16.750 inches long), this kit is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 128562, Ref: 223306) $211.00
Leveling Screw Assembly - Measuring 25.500 inches this leveling screw has a 1.000 inch diameter and 6 inches of threads. It is used with 223315 - Duckhead Pivot Assembly, 523861R2 - Crank Handle and 538970R1 Leveling Screw Housing (each sold individually). Used on Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 108836, Ref: 389542R1) $43.30
Lift Arm Latch - This Lift Arm Latch is used on 2504 Indust/Const, 2544 Indust/Const, 2606 Indust/Const, 2656 Indust/Const, 504, 544, 606, 656, 664, 666, 686, Hydro 70, Hydro 86. It replaces 380993R2, 380993R1 (Item #: 111394, Ref: 380993R2) $34.20
Lower 3 Point Latch Spring - Four of these are used per tractor. Sold individually. This part Measures 0.075 inches thick, 5.896 inches length, 0.325 inch hole diameter and tapers 0.200 to 0.755 inches width. This part ships bare metal. Replaces 380992R1, 392882R1 (Item #: 155918, Ref: 392882R1) $14.10
Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $4.98
Rear Drawbar Support, Used - For International tractor models Hydro 86, 706, 756, 766, 806, 826, 856, 966, 1026, Replaces International OEM number 72392C1, 383385R3, Only for applications with 1 piece drawbars, For a new version of this item use Item #: 109485, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409485) $155.01
Stabilizer Control Arm - International Tractors Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 all use this Stabilizer Control Arm on Three Point Hitches. (Item #: 127417, Ref: 389362R1) $226.00
Stabilizer Control Arm, Used - For International tractor models Hydro 86, Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1206, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488 (Hydro), 3688, Replaces International OEM number 382386R2, 382386R1, For a new version of this item use Item #: 109573, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409573) $140.01
Stabilizer Control Arm, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389362R1, For a new version of this item use Item #: 127417, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 427417) $134.01
Stabilizer Eyebolt, Rear - Used on Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, this Eyebolt replaces International part number 389371R1. (Item #: 152201, Ref: 389371R1) $33.80
Stub Drawbar - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686 this drawbar measures 26-1/4 inches long, 2-1/2 inches wide and 1-1/2 inches thick. It has 1.040 inch diameter holes at 6.390 inches and 8.390 inches from the front. Replaces 389099R1 (Item #: 110316, Ref: 389099R1) $144.00
Sway Limiter Lockout Pin - Part number 389370R11, Sway Lockout Pin, is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108853, Ref: 389370R11) $8.50
Sway Limiter Yoke Pin - Used on both the forward and rear yokes, this pin measures B - .621 inches in diameter, and A - 2.05 inches long. Used on Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 1026, 2544, 2656, 3088, 3288, 3488, 3688. This pin replaces part number 384852R1 (Item #: 108854, Ref: 384852R1) $3.60
Three Point Lateral Limiter Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389369R1, (Item #: 108852) $28.98
Top Link Bracket - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686, this new Top Link Bracket replaces part number 389372R41 (Item #: 109483, Ref: 389372R41) $167.00

Hydraulic System
Action Control Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 686, 2544, 2656, Replaces International OEM nos 389589R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430805) $176.01
Draft Control Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 686, 2544, 2656, Replaces International OEM nos 389583R95, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430806) $291.01
Hydraulic Pump Backplate Gasket - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 450, 460, 504, 544, 560, 606, 656, 660, 706, 786, 806, 826, 856, 886, 986, 1026, 1066, 1086, 1206, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21256, 21456, Replaces International OEM number 71265C1, 371543R1, 371543R2, For Pumps 70631C91, 70932C91, 70933C91, 70935C91, (Item #: 111636) $4.40
Hydraulic Pump, Used - For International tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560 (application), 606, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, 1026, 1456, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3488, 21026, 21456, Replaces International OEM number 70935C91, 373966R94, 1949292C1, 527755R91, For 560 application, pump must be open on back side to accomodate piggyback pump., 17 GPM, For a new version of this item use Item #: 104237, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404237) $206.01
Knob, Hydraulic Position Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 166950, Ref: 382801R1) $11.70
Knob, Hydraulic Sensitivity Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 128572, Ref: 382805R1) $8.00
Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $450.01
Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $14.00
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $38.00
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $10.10
Light Switch, 12 Volt, 4 Position - For tractor models 1026, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1066, 1456, 1466, 1468, 1566, 1568, 4166, 4186, 4366, 4386, Hydro 70, Hydro 86, Hydro 100. (Item #: 111900, Ref: 403571R1) $40.00
Rotary Light Switch - The outside diameter thread is 0.685 inches on this 6 spade terminal rotary switch. It is used on International models: Hydro 84, Hydro 86, Hydro 186, 140, 464, 574, 674, 384, 385, 484, 584, 684, 686, 4568, 784, 786, 884, 886, 986, 1086, 1486, 1586, 4186. Replaces 107200C1, 107200C2, 1-1288, IHS3234 (Item #: 153433, Ref: 107200C2) $34.20
Rubber Light Bezel - Rubber light bezel for “Hobbs” style light (without glare guard) has 3 outer tabs to attach rubber ring to the light housing, and there are 4 inner tabs to secure to the sealed beam. The bezel has an outer diameter of 5.250 in., inner diameter of 3.625 in. and measures 1.125 in. in width. The bezel slides over the outside of the light housing. You can use this bezel for front, rear or both (light bezels). Verify if you have Hobbs or Guide style before ordering. Replaces Hobbs part 4023. Also replaces 1019386M1, 10P1702, 164494A, 22-364, 269431, 676078R1, 70269431, A25213, B52085, D31441, R16888, R30182 (Item #: 163971, Ref: A25213) $12.80
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00

Miscellaneous
Flex Plate, Remanufactured, 532249R91 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 2544, 2656, Replaces International OEM number 532249R91, Plate Diameter - 11", Hub Diameter 1-3/16", Splines - 11, Center - Spring, (Item #: 204319) $81.44
Hydraulic Pump Drive Gear, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 660, 2544, 2656, Replaces International OEM nos 396859R1, Teeth: 25, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430889) $117.01
Hydraulic Valve, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 656, 664, 666, 686, 756, 766, 826, 856, 966, 1026, 1066, 1456, 2544, 2656, 2756, 2826, 2856, 4156, 4166, 4186, 4366, 4568, 4586, 4786, 21026, 21456, Replaces International OEM number 383267R94, 529910R93, 383267R91, 383267R92, 383267R93, 529910R91, 529912R91, 529912R92, 529910R92, Opened on both sides, Open Center Hydraulic Sysyem, For a Remanufactured version of this part use Item #: 206999, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498240) $555.01
O-Ring, Hydraulic - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2756, 2806, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21256, Replaces International OEM number 346959R1, 511524, (Item #: 153568) $0.50
O-Ring, Hydraulic Power Steering - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 254688R1, 14472780, (Item #: 153567) $0.90
No Picture Transmission Shift Actuating Link - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), 544 (1/66-12/73), 656 (1/66-12/73), 664 (Diesel, 1/72-12/73), 666 (1/72-12/72), 686 (1/69-12/72), 2544 (Diesel), 2656 (1/63-12/71), Replaces International OEM number 388201R11, (Item #: 173872) $87.00

Oil System
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60
Oil Pump - International D239, D310, D358 Diesel Oil Pump (Item #: 179998, Ref: 3136434R91) $406.00

PTO / Driveline
PTO Assembly, Remanufactured, 389119R92 - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, Replaces International OEM number 389119R92, Single Speed Unit, 540RPM, (Item #: 204429) $950.01
PTO Control Boot - For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 118607, Ref: 393071R2) $4.70
PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51
PTO Drive Shaft - 51 and 12 teeth. For tractor models 1026, 1066, (1086 serial number up to 47999), 1206, 1256, 1456, (1486 serial number up to 25999), 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, (3388 serial number up to 10384), 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, (886 serial number up to 16999), 966, (986 serial number up to 23999), Hydro 100, (Hydro 186 serial number up to 11999), Hydro 70, Hydro 86. (Item #: 166964, Ref: 389529R1) $563.00
PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $275.01
PTO Knob - For tractor models 544, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 112393, Ref: 387885R1) $9.40
PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186, Hydro 70, and Hydro 86. Replaces part numbers: 213712, 381480R1, 381480R91, 534917R91, 634036, and 80634036. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A) $8.40
PTo Disc - This PTO Clutch Disc has an inside diameter of 4 inches (102mm) with 51 teeth, outside diameter of 5 5/16 inches (135mm) Replaces 381490, 381490R4, 111357, 1277392C1, 1712-4422, 17124422, 1997688C1, 381490, 381490R3, 381490R4 (Item #: 111357, Ref: 381490R1) $5.60