International Harvester / Farmall Super HV Parts

[Categories]   [All Farmall Models]   [Print]  

Brakes
Brake Boot - This Brake Boot is used on OS4, Super C, Super H, Super HV, Super W4, 200, 230, 240, 330, 340, 350, Farmall Rowcrop: 300, International Utility: 300, 350. Two used per tractor. Sold Individually. Replaces 370877R1, 355976R1 (Item #: 112347, Ref: 370877R1) $6.70
Brake Pedal Return Spring - For tractor models: 300, Super M, Super MD, Super MTA, Super W6, Super W6TA, OS6, ODS6, Super H, Super HV, 350, 400, 450, W400, W450, 460, 560, 660. Replaces IHS873. (Item #: 165220, Ref: 357164R1) $11.40
Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $15.50
Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $3.00
Disc Brake Boot - For International / Farmall tractor models H, HV, OS4, Super C, Super H, Super HV, Super W4, 200, 230, 300, 330, 340, 350, Replaces International OEM number 355976R1, For Disc Brakes, (Item #: 112348) $6.50

Clutch
Clutch Pedal Return Spring - This Clutch Pedal Return Spring is 6 inches total length. It fits H, HV, M, MD, O6, ODS6, OS4, OS6, Super H, Super HV, (Super M, Super MD both up to serial number 60000), Super MTA, W4, W6, W6TA, WD6; Replaces: 49444DA. (Item #: 126155, Ref: 49444DA) $19.00

Cooling System
Header, Water Cover - Water jacket cover for Models: 300, 350, H, Super H, Super HV. Order 45266DA Gasket separately. (Item #: 110910, Ref: 48461DA) $29.98
Radiator - For tractor models H and Super H, HV, Super HV, O4, OS4, W4, Super W4. Replaces OEM number 352628R92. (Item #: 101708, Ref: 352628R92) $400.00
Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Item #: 110010, Ref: R1852) $38.50
Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $12.90

Decals and Emblems
Hood Emblem - For Super H, Super HV, Super M, Super MTA, Super W4, Super W6, W6TA, Super W9, WD9. Hood Emblem "IH" is 2-1/2 inch x 2-3/4 inch. (Item #: 103914, Ref: 357650R1) $10.90

Drive Train
Constant Mesh Gear - For tractor models H, HV, Super H, Super HV, W4. 55 Teeth. Replaces: 357459R2, 48418D, 48418DA (Item #: 172773, Ref: 357459R2) $235.00
Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $26.00
Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.90
Seal, Rear Axle - One 2-1/2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D. (Item #: 151917, Ref: 377786R1) $15.50
Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $29.00

Electrical System
Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. R6332 (Item #: 124839, Ref: 107304C91) $114.00
Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.90
Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Item #: 104554, Ref: 1750411M91) $8.70
Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $8.90
Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $16.80
Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00
Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $17.90
Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA. All with Delco Vertical Conversion Distributor 1111411). (Item #: 103153, Ref: 1900119) $9.00
Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10
Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $31.40
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $8.90
Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.20
Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.50
Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.80
Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Farmall / IH with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. This if for vertical Delco Distributors. Not for IH Distributors or Magnetos. Replaces: 120622, 817363, 1914142, 1914144, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $14.40
Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $186.00
Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Item #: 105085, Ref: 1442P12) $174.00
Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $160.00
Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Item #: 105071, Ref: 1142) $154.00
Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Item #: 108148, Ref: 1142P12) $177.00
Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A and AV, B, BN, C Super C, H, HV, Super H and HV, M, MV, Super M and MTA, Super MD and MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with Delco distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Item #: 105072, Ref: 1142P6) $160.00
Generator Pulley - This 2 piece adjustable pulley is used on gas or LP; with generator #'s 1101355, 1101423, 1100501, 1100997. The pulley measures 4.129 inch Diameter. Made with ductile iron. Includes set screw and lock nut. Used on: H, M, I4, I6, I9, HV, MV, W6TA, W9, O4, WR9, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, W4, W6, WR9S, 300 (Farmall) up to SN 11002, 300 (Industrial) up to SN 2689, 400 (Farmall) up to SN 13458, 600, 650. Replaces 6745D, 6745DA, 6746D, 6746DA (Item #: 125677, Ref: 6745D) $52.80
H4 Magneto Pinion Driven Gear - This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Item #: 183878, Ref: 49420DX) $21.98
Ignition Tune-up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414, I4, I6, MTA, MV, O4, O6, T6, U2, W4, W6. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. Not for IH Distributors. (Item #: 103151, Ref: ATK1DCR) $9.80
Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $29.50
Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.00
Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Item #: 111272, Ref: MGK103) $9.00
Magneto Rotor H4 Magneto - This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Item #: 111106, Ref: 47425DY) $11.00
Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.90
Magneto or Distributor Drive Shaft - Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Item #: 173506, Ref: 352079R1) $130.00
Rotor - Used with Delco distributors 1111411 with a clip held cap. For tractor models: A, I4, AV, Super A, Super AV, Super AV1, B, BN, C, Super C, H, HV, Super H, Super HV, M, Super M, MTA, Super MTA, MV, Super MV, O4, O6, OS4, OS6, T6, W4, W6, 354 (distributors with a tach drive). Replaces 3069778R1. (Item #: 110177, Ref: 1750498M1) $3.60
Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $16.00
Starter Armature - Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $93.58
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $64.00
Starter Switch Actuator - This new foot starter switch actuator lever and bracket fits; H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV and Super MV where a foot activated starter switch mounts to the steering post. Replaces: Lever: 351922R11, Bracket: 351924R1 (Item #: 185010, Ref: IHS3263) $57.14
Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Item #: 105669, Ref: 1925781) $9.20
Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Item #: 110972, Ref: 1918322) $10.00
Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Item #: 117534, Ref: 79407H) $6.50
Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $30.30
Tune-up Kit - This Tune-up Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. Note, not for British Delco Distributors 7953342. (Item #: 173738, Ref: MFITK10) $27.30
Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $40.10
No Picture Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For model Super H late from 1953-1954. (Item #: 182714, Ref: 359769R91) $94.30

Engine Bearings
Cam Bearing Set - Camshaft bearing kit, 3 bearings. Induvidual bearings not available. For C152 CID 4 cylinder engine in tractors H and HV O4, OS4, W4. For 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Replaces: 45020D, 45020DB, 45021D, 45021DA, 45022D, 45022DA, 53419DB, 53420DA, 53421DA (Item #: 106661, Ref: CBK-H152) $42.70
Main Bearing Set - .010 inch. For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358 and up), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340). (Item #: 106571, Ref: MBK164-010) $93.00
Main Bearing Set - .020 inch. For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358 and up), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340). (Item #: 106572, Ref: MBK164-020) $167.00
Main Bearing Set - Main Bearing Set (standard) H and HV - (both with serial number 391358 and up). Also C152 GAS on O4, OS4 and W4- (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Item #: 106570, Ref: MBK164) $119.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models H (s/n 391357-later), HV (s/n 391357-later), I4 (s/n 33339-later), O4 (s/n 33339-later), OS4 (s/n 33339-later), Super H, Super HV, Super W4, W4 (s/n 33339-later), 300, 350, Compatible with International Combine (s) 140, Compatible with International Engine (s) C152, C164, C169, C175, Replaces International OEM number 372121R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106572, (Item #: 106573) $148.00
Rod Bearing - Rod Bearing in STANDARD. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also, C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. Standard journal measures 2.297 inches. Replaces 357990R11, 7357990, and CRK164-STD. Sold individually (Item #: 106466) $19.50
Rod Bearing - Rod Bearing in .010. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also, C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. The journal measures 2.287”. Replaces 357988R11, 7357988, and CRK164-010. Sold individually. (Item #: 106468) $17.10
Rod Bearing - Rod Bearing in .020. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also, C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. The journal measures 2.277”. Replaces 357989R11, 7357989, and CRK164-020. Sold individually. (Item #: 106469) $17.60
Rod Bearing - Rod Bearing in .030. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also, C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. The journal measures 2.267”. Replaces 357991R11, 7357991, and CRK164-030. Sold individually. (Item #: 106470) $8.60
No Picture Rod Bearing Set - .010 For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340 and up). (Item #: 183863, Ref: CRK164-010) $43.00
Rod Bearing, .001 - Rod Bearing in .002. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also, C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. The journal measures 2.296”. Replaces 357992R11, 7357992, and CRK164-002. Sold individually. (Item #: 106467) $11.98

Engine Gaskets
Complete Gasket Set - Complete Overhaul Gasket Set with crankshaft seals. For H, HV, O4, OS4, W4, Super H, Super HV, Super W4 (Item #: 183823, Ref: GK7509S) $141.00
Crankshaft Seal Front - Fits, 152 CID, 164 CID, 169 CID, 175 CID 4 cylinder gas engines: Models, 300, 350, H serial number <106970, H serial number 106908-391357, H serial number 391358>, HV serial number <106970, HV serial number 106908-391357, HV serial number 391358>, O4 serial number <33339, O4 serial number 33340>, OS4 serial number <33339, Super H, Super HV, Super W4, W4 serial number <33339, W4 serial number 33340>. Replaces: 286947R91, 358787R91, 297226R91, 338874R91, 358825R91, 288864R93, 358786R91, 360692R91, 51494DA, 53888D. (Item #: 106639, Ref: 360692R91) $9.70
No Picture Full Gasket Set - With Overbore Sleeves Less Timing Cover Seal For Super H, Super HV, Super W4 with C164 Gas Engine (Item #: 106718, Ref: FS3104) $117.00
Gasket, Water Header - For tractor models 300, 350, H, Super H, Super HV. (Item #: 110497, Ref: 45266DA) $5.90
Manifold Gasket Set - Manifold gasket set, contains two 1342802C1 gaskets. Used with manifolds 8033DCX and 352536R21. For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, W4 (Item #: 101549, Ref: MS8774B) $8.40
Oil Pan Gasket - OIL PAN GASKET For tractors with 152 CID Gas engines in models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Item #: 106699, Ref: 45267DA) $10.10
Oil Seal - Fits: [A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240 (use as a flat belt pulley shaft seal)], [H, HV, Super H, Super HV (use as a transmission counter shaft front seal)], [O4, W4 (Used as a brake shaft oil seal)]; The seal measures 1.375 inches inside diameter, 2.110 inches outside diameter, 0.315 inches wide. Replaces: 356502R91, 356503R91, 358781R91, 358820R91, 367810R91, 369146R91, 43308D, 43660D, 48308D, 48954D, 71700C1, 71701C1. (Item #: 152182, Ref: 71701C1) $5.10
Pushrod Side Cover Gasket - Used on H, HV, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350, this gasket measures 18-1/16 inches long and 4 inches wide. Replaces 45018DB (Item #: 167162) $23.20
Rear Crankshaft Seal Kit - Fits tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4 (with C152, C164, C175 gas or LP engines), 300, 350 (with C152, C164, C175 gas or LP engines), [International: 300, 350 (with C152, C164, C175 gas or LP engines); Replaces: 46959D, 46959DA, 379617R91, 45014D, 45013DA, 45012DA, 45012DB, 45013D, 25093DA (Item #: 106653, Ref: IHS2636) $24.00
Valve Seals - Valve Guide Seal - Positive Type (Item #: 183858, Ref: 386192R1) $3.10

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings - Basic Engine Kit, Less Bearings (C164 CID Gas and Distillate 4-cylinder engine) For tractors with stepped head pistons. Models: Super H and HV, Super W4. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130588, Ref: BEKH1161A-LCB) $858.00
Basic In-Frame Engine Kit - In Frame Engine Kit. (C164 CID Gas and Distillate 4-cylinder engine) For tractors with stepped head pistons. Models: Super H and HV, Super W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 184325, Ref: BIFH1161A) $658.61
Engine Overhaul Kit, Less Bearings - Overhaul Kit, less bearings (C164 CID Gas 4-cylinder engine). For tractors with stepped head pistons, valve length 5-5/16 inch. Models: Super H and HV, Super W4. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves (50706DA and 50707DA), valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1161A-LCB) $655.00
Engine Overhaul Kit, Less Bearings - Overhaul Kit, less bearings (C164 CID Gas 4-cylinder engine). For tractors with stepped head pistons, valve length 5-15/32 inch. Models: Super H and HV, Super W4. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves (362534R1 and 362535R1), valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1161B-LCB) $673.79

Engine Parts
Camshaft Timing Gear - 48 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). Replaces 6664D, 6664DA, 6664DB (Item #: 111368, Ref: 6664DB) $121.44
Connecting Rod Bolt Lock Tab - .420 inch bolt hole diameter. For tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Item #: 167073, Ref: 47499DB) $7.30
Crankshaft Timing Gear - 24 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). Replaces: 43706D (Item #: 121571, Ref: 43706D) $91.00
No Picture Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Item #: VSKH152C) $142.69
Cylinder Head Stud - 7/16 inch x 6 1/8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. 5 Used per engine. Replaces 48939DA (Item #: 178403, Ref: 48939DA) $17.40
Cylinder Head Stud - 7/16 inch diameter x 5-15/16 inches long. Fits H, HV, I4, O4, OS4, Super H, Super HV, Super W4, U164, U4, W4 Industrial: 300, 350, Farmall: 300, 350. 11 used per engine, gas and LP. Replaces: 45009D. (Item #: 178402, Ref: 45009D) $16.40
Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Item #: 179313, Ref: 49407DBX) $10.80
Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Item #: 183906, Ref: IHS2559) $51.00
Governor Thrust Bearing - Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Item #: 183913, Ref: 351910R91) $81.00
Valve Exhaust - Exhaust Valve, length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128741, Ref: 50707DA) $9.70
Valve Guide - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128745, Ref: 8049DR) $4.80
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60
No Picture Valve Service Kit - Cylinder HEAD Service KIT For Super H, Super HV, Super W4. Contains: springs, guides, locks, (no valves). (Item #: VSKH164A) $71.95
Valve Spring - For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 128734, Ref: 358197R1) $1.00
Valve, Exhaust - This exhaust valve is for tractors with flat head pistons. Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.08 inch length, 1.38 inch head diameter. (Item #: 172940, Ref: 57697D) $26.00
Valve, Intake - Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.05 inch length, 1.50 inch head diameter. 4 used per engine. Sold individually. (Item #: 172891, Ref: 57696D) $24.60
Valve, Intake - Intake Valve. GAS. Length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Item #: 128740, Ref: 50706DA) $11.80

Engine Pistons and Sleeves
Pin Bushing - Piston pin bushing, 4 used per engine. For C152 CID 4 cylinder engine in tractors H, HV, O4, OS4, W4. For H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Price shown is for each, sold only in multiples of 4 items. (Item #: 108037, Ref: 25998H) $11.40
No Picture Piston Sleeve - 3-1/2 inch to 3-9/16 inch overbore. For tractor models Super H, Super HV, Super W4. (Item #: 172352, Ref: SD252) $137.00
Piston, 4 Ring, Stepped Head - Single piston, 1.108 inch piston pin diameter. For tractor models Super H, Super HV, Super W4. This is an overbore from 3 1/2 to 3 9/16 inches. Piston pin and retainer included (not shown). (Item #: PA251) $74.63
Sleeve and Piston Kit - For Super H and HV, Super W4 using C164 gas engine. Kit includes (4) Stepped head pistons, rings, liners, pins and retainers. Overbore from 3 1/2 inch to 3 9/16 inch. (Item #: 184701, Ref: PK161) $608.00

Engine Rings
Piston Ring Set - 3 9/16 Bore - Ring set for 1 piston, 4 used per engine. For C164 CID 4 cylinder engine. Contains 3 compression 3/32 and 1 oil at 1/4 for each cylinder. For Overbore Super H, Super HV, Super W4. (Item #: 129075, Ref: PRS161) $38.10
Piston Ring Set - Standard - 4 Cylinder - For International / Farmall tractor models Super H, Super HV, Super W4, Compatible with International Engine (s) C164 (gas), D166 (diesel), Compatible with Oliver tractor models 66, Bore: 3.500", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 129061) $281.00
Piston Ring Set - Standard - Single Cylinder Set - For International / Farmall tractor models H, Super H, Super HV, Super W4, 300, 350 (all gas), Compatible with International Engine (s) C164, C169, C175, Bore Size: 3.5625", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Standard - Four Cylinder Piston Ring Set use Item #: 179776, (Item #: 129075) $38.10

Exhaust System
Exhaust Manifold Nut - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682987C1, Replaces Case IH OEM number 63460D, 43715D, (Item #: 168629) $2.10
Exhaust Manifold Stud - For International / Farmall tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, I4, O4, OS4, Super H, Super HV, Super M, Super W4, Super W6, W4, W400, W450, 300, 350, 400, 450, 666, 686, 766, 886, 966, 986, 1066, 3688, Compatible with International Combine (s) 140, 453, 815, 1440, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C152, C164, C169, C175, C248, C264, C281, D312, D360, D414, D436, Replaces International OEM number 682840C1, 63459D, (Item #: 168630) $5.37
No Picture Manifold - For International / Farmall tractor models Super H, Super HV, 300, 350, Replaces International OEM number 358064R11, 362536R21, Manifold measures 2-11/16" from center to center on the carburetor mounting stud holes, Stud diameter measures 3/8", Has the correct fit and appearance., (Item #: 117728) $240.51
Muffler - Restoration Quality - For International / Farmall tractor models H, HV, I4, Super H, Super HV, Super W4, W4, 300, 350, Replaces International OEM number 350600R94, 350600R95, 51070D, High Temperature Paint, IH Logo and part number stamped into side, Inlet Length: 2-1/8", Inlet ID: 2-3/8", Shell Length: 12-1/4", Shell Diameter: 5-1/2", Outlet Length: 13', Outlet OD: 1-3/4", Overall Length: 27-3/8", (Item #: 164536) $67.00
Muffler Clamp With Hardware - Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Item #: 178185, Ref: 350602R1) $14.50
Muffler, Vertical - For tractor models H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Vertical, 5 1/2 inch round, 2 3/8 inch inlet inside diameter, 2 1/2 inch outlet outside diameter, 29 inch overall length. (Item #: 100801, Ref: 350600R95) $46.00
Vertical Exhaust Muffler - This stainless steel muffler fits the following tractors models: H, HV, I4, Super H, Super HV, W4, and Super W4. It also replaces the OEM part numbers: 355869R1 and 350600R95. The inlet length is 1 7/8 inches and the inlet inside diameter is 2 3/8 inches. The shell length is 10 1/4 inches and the shell diameter is 5 1/2 inches. The outlet length is 13 1/4 inches and the outlet outside diameter is 1 3/4 inches. The overall length is 27 7/8 inches. Polished Stainless Steel (can discolor from extreme heat). If the stainless steel tarnishes, it will buff out with a metal cream such as Blue Magic. (Item #: 164537, Ref: 51070D) $172.00

Fuel System / Air Intake
Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. For clamp style air cleaners, not clip style. For IH gas applications H, I4, HV, O4, OS4, Super H, Super HV, W4, 300, 340, 350, 404, 424, 504. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $32.60
Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Item #: 107990, Ref: 47398DX) $18.80
Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1/4 inch pipe to 5/16 inch flare. (Item #: 111514, Ref: 29902DX) $16.20
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 358065R91, 358065R92, 361525R92. For the following tractor models: Super H, Super HV. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203310, Ref: 1410-CARB) $265.01
Comprehensive Carburetor Kit - For tractor models Super H and Super HV. Use with International # 358065R91 and 358554R91 Carburetors. (Item #: 184277, Ref: R7526) $77.00
Fuel Cap - 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 116503, Ref: 40756D) $4.98
Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Item #: 121475, Ref: 12770D) $12.40
Governor Control Sector - Governor control sector with pivot pin for tractors: H and HV, Super H and Super HV, M and MV, Super M and Super MV. (Item #: 114409, Ref: 51351DBXA) $74.00
No Picture Governor Spring - For International / Farmall tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350, (Item #: 167074) $13.80
Insulating Fuel Tank Pad - For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel), Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel), Replaces Case IH OEM number 60671D, (Item #: 163917) $3.10
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. (Item #: 105364, Ref: 49923D) $3.50
Throttle Plate Assembly - This is a Square Tooth Throttle Control Assembly (Governor Control Assembly) used on H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA. Replaces: Handle: 361244R11, Sector: 361246R11, Assembly: 366727R91 (Item #: 114409, Ref: 366727R91) $74.00
Throttle Plate Assembly - H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA; Replaces: Saw tooth Lever: 51348DAX, Saw tooth sector: 51351DBX, 51351DBXA (Item #: 114409, Ref: 51351DBX) $74.00

Gauges
Fuel Gauge Cap - This vented fuel cap has a built in gauge. Overall length is 13 inches. Uses gasket part number 23977DA - sold separately. For models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4. (Item #: 160452, Ref: 365498R91) $110.00

Hitch / Drawbar
Swinging Drawbar Roller Shaft Support - For International / Farmall tractor models H, HV, M, MD, MTA, Super H, Super HV, Super M, Super MTA, Replaces International OEM number 356653R91, (Item #: 126738) $63.00

Hydraulic System
Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe, 11.80 inches long. For tractor models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower. All equipped with lift all countershaft driven hydraulic pump. (Item #: 126480, Ref: 15158EX) $30.30
Hydraulic Pump Control Rod - Hydraulic Pump Control Rod is 38 inches long with a 3/8 inch diameter. It is used on the following tractors using belly mounted hydraulic pump: H, HV (Super H, Super HV both up to serial number 19233). This part replaces original part number 15091EX. (Item #: 179705, Ref: 15091EX) $44.50
Hydraulic Pump Seal, O-Ring and Gasket Set - Hydraulic Pump Seal, O-Ring and Gasket Set Fits: (I4, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 all when converted Thompson live hydraulic pump), (300, 350 both when using Thompson live hydraulic pump; gas, LP or diesel), Fits pump #'s 363779R91, 363779R92, 363779R93, 363779R94, 366823R91, 366823R92, 366823R93 (the pump number is stamped into the aluminum upper pump housing). Contains 1 gasket 352439R1, 352439R2, 1 gasket 366783R1, 366783R2, 1 oil seal 356887R91, 124633R91, 2 oil seals 363781R91, 6 o-rings 355965R1, 511029, 1 o-ring 259246R1, 87016953, 2 o-rings 257611R1, 70925639, 2 back-up washers 369870R1, 1 5/8 inch - 18 NF jam nut 114498 and 86637932. Replaces: 363783R93, 363783R94 (Item #: 178899, Ref: 363783R93) $91.00
Seal, Countershaft Driven Hydraulic Pump - This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70

Lights
Headlight Gasket - Black rubber, like original with staple. For use in 4 ¾ inch diameter light assembly. Used with 53523D.For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces AA2329R, 53527D. (Item #: 112484, Ref: 53527D) $4.00
Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 110589, Ref: 358892R91) $2.98
Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: Cub up to serial number 165152, Super C up to serial number 159454, TD with bulb style light, (Super WDR9, WD9 up to serial number 1041), W6 up to serial number 3950, (Super H, Super HV up to serial number 19233), ( Super AV, Super A, W4 all early up to 1953), (Super M, Super MD up to serial number F28174 and Louisville built up to serial number L504508), A, B, C, H, M, I4, I6, I9, ID6, ID9, AV, BN, MDV, MTA, MV, TD6, W9, O4, WR9, O6, ODS6, OS4, OS6, Super MD, Super MTS, Super W4, WD6, WR9S. Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.00
Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Item #: 185606, Ref: S.02377) $10.70
Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Item #: 112980, Ref: 53525DA) $17.20
Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Item #: 179762, Ref: 359773R91) $8.72
Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Item #: 179711, Ref: 57313D) $11.10
Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125672, Ref: R5362) $46.70
Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107984, Ref: R5364) $32.98
Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178354, Ref: R5366) $61.00
Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107095, Ref: R5368) $40.70
Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178387, Ref: R5361) $61.00
Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 125715, Ref: R5363) $49.40
Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 178351, Ref: R5365) $29.98
No Picture Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Item #: 107094, Ref: R5367) $27.00
Rear Combo Light Assembly -6Volt - Replaces 355911R91, manufactured to restoration standards. Rear combo light assembly, 6 Volt. Includes red jewel light with rotary switch. For: Cub, Super A and AV, C, Super C, H, HV, Super H and HV, M, MD, MDV, MV, Super M and MTA, O4, o6, ODS6, OS6, W6, WD6, W6TA, Super W6, W9, WDR9, WR9, Super W9, 100, 130, 140, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 105335, Ref: 355914R91-6V) $73.00
Sealed Beam 6 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Item #: 111938, Ref: 358890R92-6V) $40.00
Sealed Beam Bulb 12 Volt - Sealed Beam will work in the flat back lights on our web page but, will not work on the tear-drop lights. This is a 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9. Replaces 358893R92, 358893R91 (Item #: 161211, Ref: 358890R92-12V) $62.00

Oil System
Oil Filler Cap - This Oil Fill Cap does not come with hardware or gasket. We do not have those parts available. For tractor models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Item #: 126605, Ref: 4819DX) $15.00
Oil Filter - Oil filter element, cartridge type. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Item #: 111120, Ref: 376374R91) $14.20
Oil Filter, Spin-On - For tractors that have been converted from cartridge type to spin on oil filters. (Item #: 118399, Ref: E7NN6714AA) $14.20
Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For models using the original oil petcock in A, AV, B, BN, C, F12, F14, F20, F30, H, HV, I12, I14, I4, I6, M, MTA, MV, O12, O14, O4, O6, OS4, Regular, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, W12, W14, W30, W4, W6, 10-20, 15-30, 22-36 and early models of 350, 400, W400, W450 used to replace top oil checking petcock. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.60
Spin On Oil Filter Adapter Kit - This Spin On Oil Filter Adapter Kit Fits all Gas and LP, IH Combines: 105, 122, 140, 203, 62, 64, 76, 91, 93. Industrials: (I4, I6 Serial Number 4253 and up). Tractors: 300, 350, 400, 450, (A without hydraulics), B, BN, H, HV, (M, MV Serial Number 595394 and up), MTA, O4, (O6, W6 Serial Number 4253 and up), OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, (T6, U6 Serial Number 5455 and up) ], (T6-61, U164, U4, UC248 Serial number 2327 and up), W4, W400, W450; For Replacement filter, order E7NN6714AA. Replaces: 538829R91 (Item #: 166373, Ref: 538829R91KIT) $123.00

PTO / Driveline
PTO Safety Shield - For H after serial number 118000, HV, Super H, Super HV. PTO Safety Shield. (Item #: 113259, Ref: 66387DAXA) $70.00
No Picture PTO Shaft Guard - PTO Shaft Guard attaches with a hose clamp that can be purchased locally. For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Item #: 103975, Ref: 51484DX) $18.70

Seats
Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H and HV, Super H and HV~ M and MD, Super M and MTA~ Super W6 and W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Item #: 179249, Ref: 356892R2) $12.00
Seat Locator Spring - This Seat Locator Spring fits: C, Super C, (Super H, Super HV serial number 19234 and up), (Super M, Super MD, Super MDV, Super MTA, Super MV serial number 28175 and up) Super MTA (Diesel serial number 28175 and up), 200, 230, 400, 450, 560, 600, 650, 660, Farmall Rowcrop: 300, 350, 460, Wheatland: 400, 450; Replaces: 352105R1. (Item #: 115150, Ref: 352105R1) $8.58
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30
Seat Shock, Mid Mount - For tractor models: C, Super C, Super H, and Super H. All serial number 19234 and up; M, MD, MDV, Super MDV, Super MD, 200, 230, 300, 350, 400, 450, 460, 560. Shock absorber for mid mounted shock is 7 1/4 inches from center-to-center compressed length. Replaces IHS347, 361033R91. (Item #: 105340, Ref: 351750R93) $39.00
Seat Support Pivot Rod - Rod that fits in the end of the Seat Support. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Item #: 105344, Ref: 352648R1) $22.30

Sheet Metal / Body Parts
Battery Box - For tractor models Super H, Super HV. Battery Box, Restoration Quality. Less lid. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104002, Ref: 359500R91) $192.85
Battery Hold Down Rubber - The battery hold down rubber is3/4 inches tall, inserts into the retainers in the battery box lid. These are sold EACH. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Item #: 116587, Ref: R5103) $4.60
Fender Extension Mounting Kit - One kit used per tractor. For tractor models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. Replaces IHS364. (Item #: 103989, Ref: 8000072) $90.00
Grill Screen Insert - This complete grill and screen for tractor models H, Super H, HV, Super HV. (Item #: 103939, Ref: 48963DXA) $44.40
No Picture Grille Screen - For International / Farmall tractor models A, B, C, Cub (s/n 222500-earlier with round hood / grille), Cub Lo-Boy (s/n 17200-earlier with round hood / grille), H, HV, I4, I6, I9, M, MD, MTA, O4, O6, O9, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MTA, W4, W6, W9, 100, 130, 140 (s/n 23300-earlier), 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, Size: 2' x 3' with 5 squares per inch, Wire Grille Screen Clips use Item #: 108001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112471) $17.98

Steering
Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.80
Spindle-LH - This spindle is for tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 104340, Ref: 360419R91) $141.98
Spindle-RH - This spindle is for tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). The wheel bearing kit used for this spindle is part number WBKIH4. (Item #: 104330, Ref: 360420R91) $232.00
Steering Shaft - For H, HV, Super H, Super HV, Farmall 300, 350. Overall length 43 inches, 3/4 inch shaft, threaded end 3/4 inch UNF. (Item #: 126730, Ref: 50047DB) $148.00
Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.60
Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Item #: 157780, Ref: 353435X1) $1.00
Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Item #: 173004, Ref: 6660DA) $38.10
Steering Worm Gear - For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Item #: 128568, Ref: 50038DB) $98.00
Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Item #: 178091, Ref: ST225B) $9.30
Steering Worm Shaft Oil Seal - This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Item #: 122678, Ref: 43800D) $5.50
Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $13.10

Wheels
No Picture Bearing Cone - Outer cone for bearing kit FW112FS. For tractor models HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6. (Item #: ST771A) $69.39
No Picture Bearing Cone - Inner cone for bearing kit FW112FS. For tractors HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Item #: 172820, Ref: ST781A) $38.00
No Picture Bearing Cup - Inner cup for bearing kit FW112FS. For tractors HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Item #: 179997, Ref: ST882) $14.70
Front Wheel Bearing Kit - Kit contains one each: 342S (cone), 332 (cup), 2878 (cone), 2820 (cup), 48704DA (seal), 15288A (felt seal). Repairs one wheel. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6. (Item #: 126828, Ref: FW112FS) $178.00
Oil Seal - Oil seal for bearing kit FW112FS. For tractor models HV, Super HV, MV and MDV, O6, ODS6, W6, WD6, Super W6 and WD6, 400, 450. 358779R91, 358818R91, 367161R91, 372475R91, 48704D, 48704DA, 704108R91, 708108R91 (Item #: 123838, Ref: 48704DA) $29.00
Rear Wheel Clamp - This rear wheel clamp is for 2 1/2 inch diameter axles. NOT FOR STEEL WHEEL OR CUT DOWN WHEEL APPLICATIONS. Fits cast wheel center part number 6194D. It is for tractor models H, HV, Super H, Super HV, 300 early, for all 6194D rear wheel. (Item #: 111698, Ref: 6192DBX) $80.00
Rear Wheel Rim Clamp Bolt - For International / Farmall tractor models H, HV, M, MD, MTA, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super W9, W4, W6, W9, WD9, 300, 400 (s/n 5180-earlier), Replaces International OEM number 48985DA, 13491R1, 4.25" x 5/8" NC, Square head 1", Grade 5, Single Dot Square Head, (Item #: 126624) $13.60
Rim Clamp, Used - For International tractor models H, HV, M, MD, Super H, Super HV, Super M, Super MTA, 300, 350, 400, 450, 560, 660, Replaces International OEM nos 48984D, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496585) $5.01
Wheel Bearing Kit, Wide Axle Assembly - For tractor models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A (Cone), 14274 (Cup), 1779 (Cone), 43828D (Gasket), 704083R1 (Seal), 48548D (Seal Retainer), 1729 (Cup). Inner bearing inside diameter is 1.37 inch, outside diameter 2.71 inch. Outer bearing inside diameter is 0.93 inch, outside diameter 2.23 inch, seal inside diameter is 1.74 inch, outside diameter 2.83 inch. (Item #: 100853, Ref: WBKIH4) $39.20
Universal Parts and Accessories Category: Accessories / Supplies

Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $357.14
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $101.57

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.60
Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $16.90
Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.30
Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $4.80
Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.80
Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.10
Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $29.70
Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $35.60
Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.50
Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.80
Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $4.80
Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $13.80
Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.30
Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.10
Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.10
Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.40
Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $13.80
Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $24.80
International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.20
International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.10
International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.10
International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.40
International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $13.60
International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.20
International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.00

Electrical System
NOTE Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.	NOTE
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20
No Picture Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00
No Picture Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.30
Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70
No Picture Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.80
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.30
NOTE Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!	NOTE
Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $18.70
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.70
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.70
Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $26.50