FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson 20 Parts

Category: Clutch

[Categories] [All 20 Parts] [All Ferguson Models]

No
Picture
Clutch Alignment Tool - Dual Stage Clutch Alignment Tool with 1 1/8 inch by 10 splines and 1 5/8 inch by 25 splines. For tractor models 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 175UK, 178UK, 180, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240P, 240S, 245, 253, 255, 261, 263, 265, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290UK, 30, 30E, 3165, 35, 40E, 383, 390, 481, 670, 690, 50, 65, 97, TO35. (Item #: 119890, Ref: 1212-5955) $17.00

Clutch Disc - Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. For the following tractors using Continental Gas engine: TE20, TEA20, TO20, TO30, 202, 203, 205, 20C, 50C. Replaces OEM 180241M91. (Item #: 111601, Ref: 91A7550WHD) $29.10

Clutch Disc, 11 Inch - 10 spline, 1.125 inch hub. For all MF tractors with 11 inch DUAL Clutch, EXCEPT for TO35: (to serial number 177394 and 177520 thru 177537); F40, MH50. Tractors: TO35 late production, 35, 50, 65, 135, 150, 165, 175, 180, M230, MF235, MF245, MF255, MF265, MH50, industrials: 20, 20C, 30, 30B, 30D, 40B.. Will replace 890302M91. (Item #: 112308, Ref: 516068M91) $44.00

Clutch Disc, 9 Inch - 10 spline on a 1 3/4 inch hub diameter. PTO Clutch Disc For 20, 30, 40, F40, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65, TO35. (Item #: 163114, Ref: 3620411M91) $52.00

Clutch Kit, 11 inch, Fine Spline - Our new 11 inch complete clutch kit contains: 11 inch, 25 spline, 1.625 inch hub, standard spring, double pressure plate (532319M91). 11 inch 10 spline, rigid drive disc (516068M93). 9 inch 1 3/4 inch hub PTO disc. Pilot bearing measuring 1.57 inches outside diameter, 0.669 inch inside diameter, 0.472 inch width (832960M3). Release bearing measuring 4.06 inches outside diameter, 2.49 inches inside diameter and 0.870 inch width (892862M2). Clutch alignment tool. For tractor models 135, 150, 165, 175, 175 U.K., 178 U.K., 180, 20, 20C, 2135, 235, 245, 255, 265, 30, 3165, 35, 50, 65, 97, TO35. (Item #: 111060, Ref: 1212-1420) $300.00

Clutch Kit, Dual, Coarse Spline - Includes NEW: 526666M91 Pressure Plate is 11 inch and 10 spline, 516068M93 Clutch Disc is 11 inch and 10 spline, Release and Pilot bearings, and clutch alignment tool. Fits the following tractors that use a 10 spline PTO disc: 135, 150, TO35. This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch. Not for Deluxe models. (Item #: 111063, Ref: 1212-1400) $310.00

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.00

PTO Disc, 9 Inch - 10 spline on 1.750 inch hub. For tractor models 135 dual, 165 dual, 175 dual, 180, 20 dual, 202 dual, 203 dual, 204, 2135 dual, 2165 dual, 2200 dual, 30, 302 dual, 30B dual, 3165 dual, 35 dual, 50, 65, F40 dual, TO35 dual. Replaces 1753753M91, 1753753M92, 1753753M93, 1753753M94, 3620411M91, 3620411V91 (Item #: 113815, Ref: 1753753M94) $42.60

PTO Disc, 9.055 - 9.055 inch rigid disc, organic, spline diameter 1.75 inch 10 spline. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 serial number 515396 and up, 65, TO35 serial number 177395-177519 and 177538 and above. All with dual clutches. Replaces 1034195M1, 1539020C1, 1753753M1, 1753753M94, 1753753M94-A, 181102M92, 1851652M92, 323022046, 323022047, 3620411-RF, 3620411-RO, 3620411M1, 3620411M91, 392492R91, 709640R92, 899823M91. (Item #: 163114, Ref: 323022047) $52.00

Pressure Plate, 11 Inch - For 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Late production) (Item #: 182796, Ref: 1040884M1) $82.00

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $24.10

Release Lever - For tractor models 150, 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35. (Item #: 182186, Ref: 899818M2) $17.20

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $1969.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1119.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All 20 Parts] [All Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy