FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 2000 Parts

Category: Brakes

[Categories] [All 2000 Parts] [All Ford Models]

Brake Adjuster Assembly - Brake Adjuster Assembly. This part measures 4 1/4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. Also can replace early type brake adjusters. Fits 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531, Dexta, Super Dexta. Replaces OEM numbers C5NN2N046B, 957E2039, 957E2043, 957E2044, 81815741. (Item #: 166242, Ref: 1850213M91) $23.80

Brake Adjusting Hole Cover - This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Item #: 125733, Ref: H2092) $8.90

Brake Anchor Pin Retainer, Pack of 2 - This brake anchor pin retainer is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964) (Item #: 192534, Ref: NCA22286A) $16.20

Brake Anchor Spring - This Brake Anchor Spring is 4 inches overall length, has a 2-3/8 inch coil length and 5/8 inch coil diameter. It is used on the following Ford Tractors: 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531, Dexta, Super Dexta. Replaces 957E2036, C5NN3A346B (Item #: 178056, Ref: 957E2036) $5.00

Brake Back Plate Dust Seal - This brake back plate dust seal is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1958 to 1964). (Item #: 185115, Ref: NCA2217A) $9.40

Brake Backing Plate - Fits the following, all built after December 1966: 2110, 2120, 2310, 2600N, 2610, 2810, 2910, 3100, 3120, 3190, 3610, 3910, 4000, 4110, 4600, 4610, 2000, 3000, 4110, 2600, 3600, 231, 233, 333, 335, 531, 2310, 2610, 230A, 234, 334, 530A. Replaces 81815610, C5NN2212D (Item #: 105507, Ref: C5NN2212D) $165.00

Brake Camshaft Hole Cover Spring - This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Item #: 178191, Ref: 8N2322) $4.30

Brake Cross Shaft - 16-5/16 inches long, 1-1/8 inch diameter. For tractor models (2000, 3000 up to 10/1972), (2110LCG, 3400, 3500, 4110LCG up to 10/1972). (Item #: 154956, Ref: D1NN2473B) $60.00

Brake Cross Shaft Bushing - Outside diameter 1 1/4 inches, inside diameter 1 1/8 inches, length 1 inch. Fits 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8010, 8210, 3230, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. INDUSTRIALS: 230A, 231, 234, 250C, 260C, 2110LCG, 334, 335, 340A, 345C, 3400, 3500, 3550, 420, 445, 450, 4400, 4500, 530A, 531, 532, 535, 540, 545, 550, 555, 5500, 650, 655, 6500, 750, 755, 7500. (Item #: 151822, Ref: C5NN2N477A) $5.70

Brake Drum - ***USE PART NUMBER NCA1126A *** For tractor models 2000, 4000, 4110 with L/Differential Lock 1965 thru 3/1968. Also for 600, 601, 700, 701, 800, 801, 900, 901 all after 1954. AN ADDITIONAL $12 shipping will be added to your order due to weight of item. (Item #: 105493, Ref: 86533415) $110.00

Brake Drum - Fits 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 334, 335, 530, 531. (Item #: 105494, Ref: C5NN1126E) $70.00

Brake Drum - This cast iron brake drum is for tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Prior to 10/1965). Replaces 86533415, NCA1126A. (Item #: 105493, Ref: NCA1126A) $110.00

Brake Pedal Return Spring - Brake Pedal Return Spring measures 3 1/4 inches and wire thickness of .100. Fits tractors: 2000, 2300, 2310, 2600, 2610, 3000, 3610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 3400, 3500, 4110LGC, 530A, 531 (Item #: 124542, Ref: E1NN2472BA) $4.30

Brake Pedal Shaft - 18.46 inches in length. For tractor models 2000-1972 and later, 2100, 2110, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000-1972 and later, 3100, 3120, 3150, 3190, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 340B, 3500, 3600, 3900, 4000-1972 and later, 4100, 4110, 420, 445, 445A, 4600, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A. Brake pedal return spring E1NN2472BA and bushing C5NN2N477A are available separately. (Item #: 165726, Ref: D9NN2N337FA) $134.00

Brake Repair Kit - This Brake Repair Kit is for all 4-cylinder Ford tractors built from 1955 through 1964, except Majors. Kit includes all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Kit does not include shoes. Kit is complete for one wheel. Replaces: (4) Spring Clip: 6H2066, (1) Adjuster Socket: 8N2048, (1) Adjuster Nut: 8N2223, (1) Adjuster Screw: H2041, (1) Felt: NCA2217A, (2) Collar : NCA22218A, (2) Retainer Pin: NCA22276A, (2) Clip: NCA22286A, NCA2250, (1) Spring: NCA2296B, (2) Pins: NCA2333A, (2) Spring: NCA2204A, NCA22275A, NCA22219A (Item #: 105515, Ref: NCA2250) $46.00

Brake Rod - Cross shaft to actuator shaft, 7-3/4" from center of holes to end of shaft, 3/8" UNF thread. For tractor models 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 4110LCG, 530A, 531. (Item #: 170959, Ref: C7NN2466A) $15.60

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.10

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1/16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Item #: 150914, Ref: D9NN2N289AA) $3.30

Brake Shoe - Shoe, with lining, 2 inches wide. Price shown is for each, 4 used per tractor. Replaces C7NN2218A, 86531521. Verify 2 inch width before ordering. (Item #: 105491, Ref: C7NN2218A) $39.40

Brake Shoe Adjusting Screw Spring - Must order 2. Price is for each. This Brake Shoe Adjusting Screw Spring is for tractor models: 501, 600, 700, 800, 900, 2000, 4000 series. 1801, 2030, 2130, 3500, 2100, 2300, 3000 (1955 to 1964). This item is priced EACH piece. If you order quantity of 1, your order will be adjusted to quantity of 2. Also replaces part numbers 49141 and 80049141. (Item #: 182025, Ref: NCA22219A) $4.00

Brake Shoe Anchor Pin - This brake shoe anchor pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185113, Ref: NCA2333A) $4.50

Brake Shoe Anchor Pin Collar - 1 inch outside diameter, 3/4 inch inside diameter, 9/16 inches wide. This brake shoe anchor pin collar is for tractor models: 501, 600, 601, 700, 701, 800, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185533, Ref: NCA22218A) $1.80

Brake Shoe Hold Down Spring Pin - Priced for 1, must order 2 - This brake shoe hold down spring pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185118, Ref: NCA22276A) $1.20

Brake Shoe Retaining Pin Kit - This kit will do 1 set of brakes. 2 kits required per tractor. Contents for 1 kit is as pictured. For models 3500, Dexta, Super Dexta, 2000, 2100, 2110, 2120, 2150, 230A, 2300, 231, 2310, 233, 234, 2600, 2610, 3000. Replaces VPJ7300, 81717336, 81802465, 81802473, 82019841, 957E2069A, 957E2068, 957E2066 (Item #: 105640, Ref: 1810029M91) $4.98

Brake Shoe Retracting Spring - This brake shoe retracting spring is for tractor models 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Item #: 114882, Ref: NCA2296B) $17.10

No
Picture
Brake Shoe Return Spring - For Ford tractor models 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 (all 4 cylinder 1955-'64), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NCA2204A, (Item #: 182026) $6.40

Brake Shoe Return Spring, RH Brake - This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Item #: 178084, Ref: NCA2204A) $6.80

Brake Shoe Spring, Primary to Secondary - This Spring is 5-3/16 inches over all, has a 2-11/16 inch coil length and a 5/8 inch coil diameter. It is used on tractor models Dexta, Super Dexta, 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531. Replaces original part numbers 957E2035, 81717325, C5NN2B289A (Item #: 124543, Ref: 957E2035) $4.30

Brake Shoe with Bonded Lining - This shoe is 1 1/2 inch wide, 13.25 inch diameter. Brake Shoe For 2000, 3000, 4110 (12/1966 and up), 2600, 3600. Replaces C5NN2218F. Also replaces F2NN2218A. Price is each. 4 used per tractor. (Item #: 105490, Ref: D9NN2218AA) $22.00

Brake Shoe with Lining - This Brake Shoe is 1 1/2 inches wide and 13 inches in diameter. For tractor models (2000, 3000, 4110 all from 1/1965 to 11/1966). Price shown is for each, sold only in multiples of 4 items. (Item #: 105489, Ref: C5NN2218E) $30.00

Brake Shoe with Lining, Pack of 2 Shoes - This brake shoe with lining is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1955 to 1964). (Item #: 105488, Ref: NCA2218B) $40.00

Brake Spring - For Ford tractor models Dexta, Super Dexta, 2000, 2110 (LCG), 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4110 (LCG), Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 530A, 531 Replaces Ford OEM number C5NN2B289A, 81717325, 957E2035, , Compatible with Massey Ferguson tractor models TEA20, 20 (C and D), 35, 35X, 50, 50 (B, D, F, H, and HX), 60 (H), 65, 135, 148, 158, 165, 168, 175, 178, 230, 231, 240, 340, 550, Replaces Massey Ferguson OEM number 1850217M1, (Item #: 124543) $4.30

Hand Brake Disc - Diameter 4 inches, 1-1/4 inch hub, 23 splines. Also replaces: D5NN2N625A and C5NN2N625B. Fits Tractors: (2000, 3000, 4000 all from 1965 and newer - UK), (2000, 3000, 4000 all from Jan/1972 and newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. Replaces C5NN2N625B, D5NN2N625A, E9NN2N625AB, 83906199, 81867258 (Item #: 105495, Ref: E9NN2N625AB) $42.50

Hand Brake Repair Kit - This Hand Brake Repair Kit contains Rod. Knob, Pawl and Spring. Replaces 81816243, C7NN2N606B, C7NN2N616D, C5NN2N615B, 81708853, E0A2744, 81819533, 81819534, 81876606 (Item #: 183910, Ref: S.66303) $16.40

Universal Parts and Accessories
Category: Brakes

Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Item #: 151012, Ref: RIVET_TOOL) $44.00

Brake Rivet Tool, Large - Larger version of our Brake Rivet Tool. this has a 3 3/8 inch deep throat and is 2 1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brakes. (Item #: 151013, Ref: LGRIVET) $114.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Brakes

[Categories] [All 2000 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy