Axle Nut Lock Ring - For 8N 1948-1953, Jubilee and NAA. Snap Ring. Priced each. (Item #: 112050, Ref: 8N4187)$2.50
Axle Nut and Snap Ring - Kit, Nut and Snap Ring. For tractor models 8N, NAA. 1-1/4 inch - 18 Threads per inch. (Item #: 109585, Ref: CBPN4179A)$9.10
Axle Nut, Clamp Lock Type - Clamp Lock Nut, rear axle, 1-1/4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Item #: 179811, Ref: LN10-21)$29.60
Axle Rear Bearing Race - This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Item #: 109579, Ref: 9N4222)$10.00
Axle Seal, Inner Seal - This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Item #: 106611, Ref: 8N4233A)$6.10
Axle Seal, Outer - For tractor models 8N serial number 486753 and up, NAA, Jubilee. 3-3/4 inch outside diameter, 2-7/8 inch inside diameter. (Item #: 111316, Ref: D5NN4115A)$9.50
Axle Shaft Gasket - For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15/16 inches, outside diameter 2 3/16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced. (Item #: 109583, Ref: 8N4284)$3.20
Center Housing Side Cover Gasket - The Center Housing Side Cover Gasket is used on NAA / Jubilee tractors, 1953-1954. Replaces original part number NAA4131B (Item #: 182899, Ref: NAA4131B)$2.10
Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Item #: 179801, Ref: 195159M1)$28.90
Differential Pinion Pilot Bearing - For tractor models 2120 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, 600 with 4 speed transmission serial number <54165 - 1958, with 5 speed serial number <196155 -1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, NAA, Jubilee 1953-1954. (Item #: 172717, Ref: 81T4625MA2)$149.00
Gasket, Axle housing to center - Gasket center housing to rear axle housing. For Ford 4 cylinder non-industrial tractors, 1953 - 1964. NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 700, 900, 2000, 2031, 2111, 2120, 2131, 4000, 4031, 4120, 4121, 4131, 4140. 13 Mounting Holes, 15 Inch O.D., 12-15/16 Inch I.D., 0.010 Inch Thick. (Item #: 172802, Ref: NAA4036A)$2.20
Gasket, Drain Plug - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011)$1.60
Gear Shift Boot - Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1/2 inches in diameter. (Item #: 184029, Ref: 8N7277)$5.60
Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Item #: 155070, Ref: 9N7227B)$11.00
Gear Shift Lever, with Knob, 4-Speed Transmission - This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref: C5NN7202B)$92.80
Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60/28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref: 8N7100)$305.00
Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-1964), 8N (1948-1952). 17 teeth. (Item #: 112154, Ref: B9NN7114A)$88.00
Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref: 8N7102)$258.00
Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref: B9NN7A381B)$145.00
Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Item #: B9NN7A381B-set)$193.00
Input Drive Shaft - This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Item #: 179301, Ref: 2N7017A)$261.37
Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Item #: 172715, Ref: E6NN7106AA)$68.00
Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Item #: 109957, Ref: 8N7052A)$8.10
Rear Axle Housing Gasket, Outer - Fits Ford 8N, 9N, 2N, NAA and Jubilee. Replaces 9N4130, 8N4229E and 8N4229. Used for seal between bearing retainer and axle housing or backing plate. More than one may be required when used as 8N4229 shim. Thickness 0.016 inches. (Item #: 153608, Ref: 9N4130)$1.00
Shift Knob - ThisTransmission Gear-Shift Lever Knob has is 3/8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3/8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5/16 UNF thread is needed, order C5NN7213A (Item #: 110012, Ref: BB7213A)$4.20
No Picture
Shift Lever, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 3400, 3500, 4000, 4400, 4500, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number C5NN7202B, For a new version of this item use Item #: 110007, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459149)$48.01
Shim for Bearing Retainer - This is a Steel Shim, .020 thick. It has 12 holes. Will work in 6 hole applications. Fits Ford 8N, 9N, 2N, NAA and Jubilee, 8N4229F and 8N4229. More than one may be required when used as 8N4229F shim. Thickness 0.020 inches. Price is for each. (Item #: 178176, Ref: 183261M1)$3.30
Side Cover Gasket - This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Replaces part number 9N4131. (Item #: 112236, Ref: 9N4131)$1.40
Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 110536, Ref: 9N7066)$12.00
Transmission Drain Plug - Has 2.3 inch outside diameter. For tractors: 8N, 9N, 2N, NAA, {1939-1954}. Also filler plug for tractor: NAA {1953-1954}. Gasket available, order part number 8N7011. Replace 9N7010, 8N7010. For a magnetic version of this plug, order 8N7010 (Item #: 115163, Ref: 9N7010)$7.50
Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Item #: 184037, Ref: 8N7010)$17.10
Transmission Rebuild Kit - For tractor models 9N, 2N and 8N with 3 and 4 speed transmissions (1939-1952). Will also work for Jubilee except for the transmission to rear end gasket. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. Contains (2) 9N7086, (1) 9N4662, (1) D5NN7223A, (1) 9N7223B, (1) 8N7052A, (1) 15385-TIM, (4) 25877, (4) 25820-TIM. Replaces: 9N7066, 86516471, 9N7086, 9N7086A, 9N7086GV, 9N7120, 9N7120GV, 81804773, 8N7052A, 8N7052A2, C0NN7052A, 83945495, 9N7067, 9N7067GV, 517512, 241336, 605188, 9605470, 9N4662, 9N4662GV, 9N7223, 9N7223B, 8N7223, D5NN7223A, E6NN7223BA, 83958318, 81817212. (Item #: 183888, Ref: TSBK3952)$198.00
Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Item #: 184559, Ref: TSBK5354)$321.00
Universal Parts and Accessories Category: Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088)$11.50
Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A)$10.00
Call 800-853-2651 to Order Or Click the "Add to Cart" Button
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
