FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 8N Parts

Category: Electrical System

[Categories] [All 8N Parts] [All Ford Models]

12 Volt Conversion Kit, Front Mount Distributor - 8N, 9N, 2N. Updates older 6-volt tractors to 12-volt charging system. For 9N, 2N, (early 8N 1948-1951) with Front Mount Distributor (distributor is right behind radiator), to serial number 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, resistor, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, and belt. Note, using the brackets in this kit may require trimming of the conduit your spark plug wires run through. Many tractors no longer have this conduit. Will not work if you have a magneto. (Item #: 103139, Ref: 8NE10300ALT-C) $156.00

12 Volt Conversion Kit, Side Mount Distributor - For Late 8N Tractors with side mount distributors (mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts/Nuts/Instructions. (Item #: 103140, Ref: 8NL10300ALT) $182.15

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

Alternator - Delco Style (7127), Remanufactured, Delco Remy, 10459509 - For Ford tractor models NAA, 2N, 8N, 9N, Compatible with Massey Ferguson tractor models TO20 (less tachometer), Replaces Delco Remy manufacturer number 10459509, Replaces manufacturer number 13-40113, 13-4011SW, 240-204-3, 7127-3SE, 7127-SEC, 240-204C, 90-01-3125, 7127-1W, N7127-1W, RA00103, For Universal Applications, 1-Wire Hookup, Delco Style, Voltage: 12, Amperage: 63 (Self Exciting), Rotation: Clockwise, Regulator: Internal, For a New version of this sku use Item #: 111377, (Item #: 204209) $193.01

Alternator Adjustable Arm - Alternator Adjusting Arm. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Item #: 164212, Ref: 8NE10304) $13.80

Alternator Adjuster Arm Bracket - For Ford tractor model 8N (s/n 263844-later), Steel, 6mm Thick, 8.2mm Unthreaded Hole, 9mm x 92mm Slot, Additional Handling and Oversize Fees Apply To This Item, (Item #: 164225) $5.98

Alternator Adjuster Bracket - For Ford tractor model 8N (s/n 263844-later), Steel, 6mm Thick, 10.5mm Unthreaded Hole, 12.9mm Unthreaded Hole, 8.7mm x 91mm Slot, (Item #: 164224) $15.50

Alternator Base Bracket - Alternator Base Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Item #: 164211, Ref: 8NE10303) $13.70

Alternator Base Bracket - Base Alternator Bracket. For 8N Late using Side Mount Distributors. (Item #: 172490, Ref: 8NL10303) $34.80

Alternator Conversion Wiring Harness - For Ford tractor model 8N (s/n 263844-later), Number of Wires: 6, (Item #: 164240) $29.50

Alternator Mounting Bracket - For Ford tractor model 8N (s/n 263844-later), (Item #: 164223) $9.98

Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5/8 inches wide. The diameter varies from our different suppliers. This measures about 2 5/8 inches outside diameter, give or take about a 1/4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Item #: 172594, Ref: AFD5035) $20.40

Alternator Top Bracket - Alternator Top Mounting Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Item #: 164213, Ref: 8NE10302) $14.50

Alternator Top Bracket - Top Alternator Bracket. For 8N late with Side Mount Distributor. (Item #: 173326, Ref: 8NL10302) $25.20

Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire "self exciting" alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Cable - For 8N, 9N, 2N. Ground Strap. 7 inches. (Item #: 115790, Ref: D1NN14301H) $12.30

Battery Cable - For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Item #: 115792, Ref: FAE14301B) $14.00

Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. Replaces: 81826317, 86H14321A, C0NN14321A, C7NN14321A, S115407 (Item #: 126653, Ref: 86H14321A) $15.40

Battery Hold Down - Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126636, Ref: NCA10728WN) $5.30

Battery Hold Down Bolt - Bolt with nut. For tractor models 8N, NAA (1948-1954). (Item #: 178014, Ref: 8N10728WN) $11.00

Battery to Starter Cable - For model 8N, 1939-1952. Starter to Battery Cable. 10.5 inches Long, 2 Gauge, 7/16 Diameter. (Item #: 172636, Ref: 8N14300B) $16.70

Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For early 8N, 9N, 2N. Measures .59 inches inside diameter and 1 3/8 outside diameter. Verify Measurements. (Item #: 108447, Ref: E27N10094B) $1.90

Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Item #: 183039, Ref: 8N9004601A) $47.90

Clip - Clip (electrical wiring to instrument panel brace) 17/32". 1 required. Tractors: 8N (1948-1950). (Item #: 178502, Ref: 8M14197) $6.20

Clip - Clip for 7/16 inch hole. Electric wiring to instrument panel support bracket 1948-1952. 1 required, main wiring assembly to instrument panel brace 1 required, wiring to hood top reinforcement 1950-1952. 3 required. For model 8N (1948-1952). (Item #: 178034, Ref: 51C14197) $3.00

Clip - Clip for 17/32 inch hole. Electrical wiring to instrument panel brace 1 required. For model 8N. (Item #: 178502, Ref: 8N14197) $6.20

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Item #: 183737, Ref: 8BA12029) $26.30

Coil - Six Volt - For tractor models 8N (1939-1950), 9N, 2N with Front Mount Distributor. Order 9N12104 gasket set separately if mounting gasket is needed. (Item #: 105529, Ref: 9N12024) $22.30

Coil - Six Volt with Script - The is an officially licensed Ford 6 Volt Coil, with raised Ford script. Replaces 9N12024. Order 9N12104 gasket set separately if mounting gasket is needed. YTO 9N12024S (Item #: 182900, Ref: 9N12024S) $52.00

Coil Wire Assembly - This Coil Wire Assembly is just like the original used on 8N serial number above 263842 and NAA, Jubilee. It replaces original part number 7RA14302. (Item #: 182945, Ref: 7RA14302) $11.10

Coil, 12-Volt - For 8N, 9N, 2N (serial number up to 263843. Front Mount Distributor 12 Volts. Order 9N12104 gasket set separately if mounting gasket is needed. Replaces 9N12024-12V. (Item #: 105530, Ref: 12VOLTCOIL) $26.00

Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case/International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Item #: 105282, Ref: D8JL12029A) $13.40

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models. (Item #: 105281, Ref: D4PE12029AA) $15.00

Complete Tune-Up and Maintenance Kit - For Ford tractor models 2N, 8N, 9N (all with front mount distributors), Includes points, condenser, plugs, distributor cap and rotor, universal spark plug wire set, .015 and .025 feeler gauges, oil cap, oil filter with o-ring and sediment bowl assembly, For front mount distributor models, (Item #: 116751) $73.00

Complete Tune-up Kit - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas), Replaces Ford OEM number 309787, Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set, (Item #: 116748) $55.00

Condenser - Fits 8N, 9N, 2N with Front Mount Distributor. (Item #: 111199, Ref: A0NN12300A) $6.00

Condenser - For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Item #: 111198, Ref: FET12300A) $5.00

Distributor - For 8N serial number 263844 and up - side mount. This distributor works with D8NN12171AA point set (included). Electronic ignition not available at this time. (Item #: 105326, Ref: 8N12127B-WCR) $98.00

Distributor Assembly, Complete - For 9N, 2N, (8N all front mount serial number up to 263843). Includes: points, condenser and distributor cap. Does not include coil or mounting gaskets. (Item #: 105325, Ref: 9N12100) $70.00

Distributor Breaker Plate - Breaker Assembly, complete with points. For 8N, 9N, 2N. For Front Mount Distributor. Please note that suppliers have been replacing distributors, distributor base assemblies and breaker plates with after market parts for some time and the mounting screw that comes into the side of the distributor is slightly higher. This may require some modification if your mounting screw does not line-up. (Item #: 116682, Ref: 9N12150) $30.60

Distributor Breaker Plate Retainer Clip - For tractor models 8N, 9N, 2N (Front Mounted Distributor). (Item #: 119700, Ref: 91A12146) $4.50

Distributor Bushing - For Ford tractor models NAA, 8N (s/n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 7RA12233, For 4 cylinder models, (Item #: 111466) $3.30

Distributor Bushing, FRONT - Front Distributor Bushing is for FRONT MOUNT DISTRIBUTOR only. For 9N, 2N, early 8N. (Item #: 110784, Ref: 9N12120) $4.00

Distributor Bushing, REAR - Bushing, (rear), for Front Mount Distributor, 8N, 9N, 2N. (Item #: 108788, Ref: 18-12132) $5.40

Distributor Cam and Weight Assembly - Cam and Weight Assembly for 8N12127B-WCR original style Side Mount Distributor. For use on models 8N after serial number 263844, 1950 thru 1952. Note the direction of the weights in the picture. You may receive what is in the picture or you may receive the weights facing the opposite directions. They both work exactly the same. (Item #: 184159, Ref: 8N12176) $75.00

Distributor Cap - For tractor models 8N, 9N, 2N to serial number 263843 all with Front Mount Distributor. Distributor Cap. (Item #: 105526, Ref: 9N12106C) $13.20

No
Picture
Distributor Cap Gasket - For Ford tractor models 2N, 8N (s/n 263844-earlier), 9N, Replaces Ford OEM number 91A12114, For front mount distributors, (Item #: 111623) $3.10

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Item #: 178205, Ref: 7RA12144) $4.60

Distributor Cap Spring Clip Set - For tractor models 8N, 9N, 2N (Early). Replaces 9N12144. (Item #: 168684, Ref: 9N12144) $4.00

Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 8N, 9N, 2N with Front Mount Distributor Electronic Ignition Conversion Kit. (Item #: 182553, Ref: 1247XTTERM) $26.80

Distributor Cap with Pertronix Coil Modification - Pertronix Distributor Cap for 8N, 9N, 2N with Front Mount Distributor THAT HAS BEEN CONVERTED TO AUTOMOTIVE STYLE KIT WITH A PERTRONIX 1247XT KIT. (Item #: 182562, Ref: 1247XTCAP) $45.30

Distributor Cap, Clip Held - Cap. Used ONLY on OLDER Tisco (Prestolite) replacement distributors (Through January 1987) for Late 8N with Side Mount Distributor. (Item #: 184762, Ref: IBK1009) $30.60

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 and above (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Item #: 100012, Ref: NCA12106A) $9.30

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Item #: 182949, Ref: B12145) $1.30

Distributor Coil Bail - For tractor models 8N, 9N, 2N with Front Mount Distributor. (Item #: 112186, Ref: 9N12137) $4.40

Distributor Coil Gasket - For Ford tractor models 2N, 8N (s/n 263844-earlier), 9N (all w/ front mount distributor), Replaces Ford OEM number 9N12140A, (Item #: 107071) $0.80

Distributor Drive Gear - For tractor models 8N, 9N, 2N. Gear for Distributor Drive On Camshaft (Item #: 163509, Ref: 7RA6255) $22.10

Distributor Drive Gear - For 8N with Side Mount Distributor, tractor serial number 263844 and above. (Item #: 186561, Ref: 7RA12390C) $37.10

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Item #: 105527, Ref: FAA12239A) $5.50

Distributor Gasket Kit - For tractor models 8N, 9N, 2N prior to serial number 263844. Kit contains distributor breaker cover gasket, distributor base gasket, distributor coil base gasket, cap gasket. Replaces: 9N12104, 91A12114, 9N12140A, 9N12143, 9N12276B (Item #: 111160, Ref: 9N12104) $3.60

Distributor Point Set - Point set, Blue Streak premium quality. For tractor models 8N, 9N, 2N (Early). (Item #: 178145, Ref: A0NN12107ABS) $27.00

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Item #: 111315, Ref: D8NN12171AA) $3.70

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Item #: 183738, Ref: 350032-KIT) $7.00

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Item #: 111464, Ref: 8N12209) $5.80

No
Picture
Distributor Rotor - Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for late 8N Side Mount Distributors. (Item #: 107073, Ref: IGP1016D) $20.70

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Item #: 110785, Ref: 8N12213) $3.60

Distributor Rotor, Front Mount Distributor - Fits 8N, 9N, 2N with Front Mount Distributor. (Item #: 111103, Ref: B2NN12200A) $5.30

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 111317, Ref: C0NN12200A) $3.10

Distributor Shaft Bushing - This Distributor Shaft Bushing is used in Side Mount Distributors, 8N serial number after 263843. Replaces original part number 8N12120. (Item #: 113854, Ref: 8N12120) $3.98

Distributor, Cam and Weights Assembly - Distributor Shaft with Cam and Weights attached for 9N12100 Front Mounted Distributor. For use on Ford tractor models 9N, 2N, and 8N before serial number 263843, 1939 to 1950. (Item #: 178579, Ref: 9N12187) $43.70

Distributor, Remanufactured, 9N12100 - For Ford tractor models 2N, 8N (s/n 263844-earlier with front mount distributor), 9N, Replaces Ford OEM number 9N12100, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, For New Distributor use Item #: 105526, (Item #: 203508) $265.01

Electronic Ignition Conversion Kit - 6V Positive Ground - Electronic Ignition Conversion Kit. For 8N, 9N, 2N with FRONT Mount Distributor only. For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Item #: 105082, Ref: 1247P6) $200.00

Electronic Ignition Conversion Kit - 6V Positive Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 172506, Ref: 1247XTP6) $425.00

Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 108154, Ref: 1247XT) $317.00

Electronic Ignition Conversion Kit, 12 volt negative ground - Electronic Ignition Conversion Kit - For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105081, Ref: 1247) $160.00

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105079, Ref: 1244A) $140.00

Electronic Ignition Conversion Kit, 6V Positive Ground - For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 105080, Ref: 1244AP6) $157.00

Electronic Ignition Replacement Module - This is a replacement module for the 1247XT electronic ignition kit. Does not have the magnetic sleeve for the rotor shaft. For front mount distributor. (Item #: 182570, Ref: 1247XT0) $106.00

Generator Armature - This Armature is used on 2 Brush, 3 Wire Generators 8N10001 on Ford 8N after serial number 263843. Also used on some Jubilees and some Ford cars and trucks. Replaces part number FAA10005BR, FAA10005B, 01A-10005, B5A-10005A, 8BA10005A, GFD3000. (Item #: 185604, Ref: FAA10005BR) $95.00

Generator Brush Set - This set is for original 3 brush Generators, used, 1939-1948. Replaces 40-10069, 40-10043 (Item #: 183025, Ref: 40-10069) $4.10

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Item #: 182496, Ref: GRK401) $42.40

Generator, 6 Volt - New Generator with Pulley. For 8N, 9N, 2N. Single terminal, 6 Volt, 2 brushes. (Item #: 107888, Ref: 8N10000) $146.00

Generator, 6 Volt - Remanufactured, Round, 3 wire, keyed shaft. For model Late 8N (SN# 8N 263843 or later) 1950-1952. Pulley NOT included. There will be an additional core charge of $50 added to your order - this is refundable if you send your core to us. Replaces, 8N10001 8N10001LPR (Item #: 203503, Ref: 8N10001) $339.90

Generator, 6 Volt - For tractor model 8N To S#263843. Remanufactured Generator. Pulley NOT included 4 3/4 inch outside diameter housing, 2 brush, 3 terminal, keyed shaft. Refundable $50.00 core charge will be added to your order. Replaces OEM number 8N10000B. (Item #: 203501, Ref: 8N10000BR) $350.20

Ignition Kit With Rotor - 4 Cylinder - Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Item #: 100011, Ref: ATK7FAR) $9.50

No
Picture
Ignitor - 4 Cylinder, 12V - For Ford tractor models NAA, 2N, 8N, 9N, Replaces Ford OEM number 8301082, Models with distributor on the front of the engine, Volts: 12, Ground: negative, (Item #: 190709) $103.31

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Item #: 105687, Ref: 8N3679C) $7.80

Point Set - Point Set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N Side Mount Distributors. (Item #: 179714, Ref: IGS2224LB) $11.70

Point Set - For Ford tractor models 2N, 8N (s/n 263844-earlier), 9N, Replaces Ford OEM number A0NN12107A, 21A151, 9N12107, Ventilated style - for models with front mount distributors, (Item #: 111197) $8.60

Pulley Generator - Fits 8N (Keyway). Shaft hole is approximately 0.67 inch (approximately 11/16 inch). Pulley outside diameter approximately 3-5/8 inches, inside diameter approximately 2 5/16 inches X 5/8 inches wide. (Item #: 172557, Ref: 8N10130A) $16.64

Pulley, Generator - Pulley, Generator (threaded). For 8N, 9N, 2N. (Item #: 111776, Ref: 9N10130B) $27.50

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Item #: 105710, Ref: 8NE10306) $3.70

Resistor - For Ford tractor models 2N, 8N (s/n 263843-earlier), 9N, Replaces Ford OEM number 9N12250, Resistor only (no mounting block), (Item #: 110783) $8.40

Resistor Assembly - For tractor models 8N to serial number 263844. Resistor measures .6 ohms +/- .1 (Item #: 111999, Ref: A8NN12250A) $14.70

Resistor and Mounting Block Assembly - This is an exact copy of the original. For tractor models 8N to SN# 263844. Resistor measures .6 ohms +/- .1 - Replaces original A8NN12250A (Item #: 183749, Ref: A8NN12250AOE) $42.80

Rubber Grommet - Rubber Grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Item #: 178174, Ref: 11A14605) $2.40

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Item #: 130072, Ref: AL437) $3.10

Spark Plug Wire Bracket - For tractors: 8N {1950-1952}. (Item #: 178052, Ref: 8N12112B) $12.40

Spark Plug Wire Bracket - For tractor models 8N, 9N, 2N, (1939 to 1950). (Item #: 178132, Ref: 9N14564) $7.40

Spark Plug Wire Grommet - Distributor Spark Plug Wire Grommet. Holds all 4 plug wires together. Tractors: 8N (serial number 263843 and up 1950-1952). (Item #: 126683, Ref: 7RA12297) $4.00

Spark Plug Wire Rubber Grommet - This Grommet is used to hold the #3 and #4 plug wires at the #3 plug. Originally used on 8N after serial number 263843 It replaces original part number 7RA12271 (Item #: 126685, Ref: 7RA12271) $3.10

Spark Plug Wire Set - Front Mount Distributors - For Ford tractor model 8N (s/n 263844-earlier with front mount distributor), Replaces Ford OEM number 9N12287B, Copper Core, (Item #: 155166) $19.00

Spark Plug Wire Set - Side Mount Distributors - For Ford tractor model 8N (s/n 263845-later with side mount distributor), Replaces Ford OEM number 9N12287B, (Item #: 155167) $16.20

Spark Plug Wire Set, Custom - Premium Quality Wire Set for 8N with Side Mount Distributor. Zinc-coated plug terminals, modern low resistance core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 specifications. (Item #: 168257, Ref: 8N12259) $18.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Item #: 126652, Ref: 8N11115) $8.20

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Item #: 126654, Ref: 8N11113) $5.20

Starter Copper Strap, Solenoid to Starter - Fits 8N. (Item #: 178208, Ref: 8N11518) $6.40

Starter Drive - New improved design Starter Drive, for 8N, 9N, 2N (1939 to 1952). (Item #: 110660, Ref: 52-11350C) $26.70

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Item #: 183576, Ref: A9AZ11102B) $8.70

Starter Repair Kit - For 8N, 9N, 2N. Starter Repair Kit contains all parts necessary for repair of starter part number 8N11001. (Item #: 178044, Ref: SRK401) $35.80

Starter Solenoid, 12 Volt - This Starter Solenoid (Relay Assembly)will work for 6 or 12 volt applications. It has three posts and a saddle mount. For 8N, 1948-1952. Replaces 8N11450 (Item #: 156618, Ref: 8N11450-12V) $12.80

Starter Solenoid, 6 Volt - This Starter Solenoid (Relay Assembly) for 6 volt Systems. For a more robust solenoid, use item # 156618. It has three posts and a saddle mount. For 8N, 1948-1952. (Item #: 105688, Ref: 8N11450) $10.20

Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Item #: 105685, Ref: 8N11500WG) $15.10

Starter, 12 Volt, With Drive - New Starter for 8N, 9N, 2N. 12 Volt. Complete starter includes starter drive. (Item #: 156607, Ref: 8N1100R) $120.00

Starter, Gear Reduction - For Ford tractor models 2N, 8N, 9N, Replaces Ford OEM number 8N11001, 8N1101R, 8N11002, 9N11001, 9N11002, 10461663, (Item #: 167399) $220.00

Starter, With Drive, 6 Volt - Starter, with drive. For 8N, 9N, 2N. (Item #: 113040, Ref: 8N11001) $117.00

Terminal Block - For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Item #: 165423, Ref: 8NNN14448A) $9.30

Tune-up Kit - This Tune-up Kit is for tractor models 9N, 9N, 2N, and Early 8N, all with Front Mount Distributor. Tune-up Kit, Autolite. Includes: point set, condenser, rotor and (4) 437 Autolite Spark Plugs and gaskets. Verify correct spark plug size and type (Item #: 185192, Ref: 309786) $30.40

Tune-up Kit - Replace all the ingition components at once. This kit contains Condenser (A0NN12300A), points (A0NN12107A), plugs (AL437), distributor cap (9N12106C), rotor (B2NN12200A), spark plug wire set (CPN12259) and .015 and .025 feeler gauges. Used on Ford 9N, 2N and 8N up to serial number 263843. (Item #: 116745) $52.00

Tune-up Kit, Basic - This basic tune-up kit has points, condenser and rotor for Front Mount Distributor. For 9N, 2N and Early 8N. (Item #: 105523, Ref: ATK6FFR) $13.70

Tune-up Kit, Basic - This Basic Ignition Tune-up Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune-up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Item #: 183923, Ref: 309787) $23.20

Tune-up Kit, Basic - This basic tune-up kit for a 4 cylinder gas contains Premium Blue Streak points (A0NN12107ABS), rotor, condenser, and gauge for Front Mount Distributor on 2N, Early 8N, and 9N. (Item #: 185624, Ref: APN12000ABSR) $37.20

Voltage Regulator - For 8N - For Early Models with Front Mount Distributor, with generator. (Item #: 105536, Ref: 8N10505B) $37.35

$Ford 8N Voltage Regulator - 6 Volt - 3 Terminal - w\ Mounting Bracket$
Voltage Regulator - 6 Volt - 3 Terminal - w/ Mounting Bracket - For Ford tractor model 8N (s/n 263844-earlier), Replaces Ford OEM number 8N10505C, 8N10505B, GR276, Replaces manufacturer number 8050-506, 3 Terminal: Battery - Armature - Field, 6 Volt Regulator comes complete with mounting plate and hardware, 10-12 output amperage, For Regulator w/o Mounting Bracket use Item #: 105536, (Item #: 105535) $35.20

Voltage Regulator 6 Volt - This Voltage Regulator has 3 terminals and is for an 8N with Side Distributor with generator. (Item #: 105536, Ref: 8N10505C) $37.35

Wiring Harness 12 Volt - For Late 8N side mount distributor tractors. 12 Volt Wiring Harness for those tractors converted to 12 Volts. This is main engine wiring only. (Item #: 155109, Ref: 8NL10301) $35.00

Wiring Harness 12 Volt - Wiring Harness for 2N, early 8N, and 9N front mount distributors tractors that has been converted to 12 Volt. Does not include light wiring. There are many different ways to wire a 12 volt conversion and this is the wiring harness provided in our 12 volt conversions set. It may be different than how your 12 volt conversion was done if not done with our kit. (Item #: 164233, Ref: 8NE10301) $24.60

Wiring Harness, 6 Volt - Has woven fabric casing. For 8N with Front Mounted Distributor and 2 wire generator, up to serial number 263843. Ignition Wiring Harness. (Item #: 105712, Ref: 8N14401B) $18.70

Wiring Harness, 6 Volt - For 8N Side Mount Distributor, serial number 263843 and up. Ignition Wire Harness. Replaces 8N14401C. (Item #: 105713, Ref: 8N14401C) $19.50

No
Picture
Wiring Harness, Headlights and Rear Lights - For Ford tractor models 2N (1939 - 1949), 8N (1939 - 1949), 9N (1939 - 1949), (Item #: 185190) $97.00

Wiring Harness, Restoration Quality - Complete Wiring Harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For model 8N up to serial number 263843 with Front Mount Distributor. (Item #: 185392, Ref: 8N14401B-OE) $270.72

Universal Parts and Accessories
Category: Electrical System

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Item #: 114088, Ref: 2348258) $49.80

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.80

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Battery Hold Down - For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Item #: 104047, Ref: NCA10718A) $13.60

Battery Hold Down J-Bolts, Pair - This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Item #: 125150, Ref: 393161R1) $9.00

Battery Joining Cable - This cable is 2 gauge measuring 10 inches. (Item #: B204) $18.75

Battery Joining Cable - This cable is 2 gauge measuring 18 inches. (Item #: B207) $21.00

Battery Joining Cable - The cable is 2/0 gauge measuring 18 inches. (Item #: B1937) $36.00

Battery Joining cable - The cable is 2/0 gauge measuring 12 inches (Item #: 186350, Ref: B1936) $39.90

Battery to Starter Cable - This cable is 2/0 gauge measuring 12 inches. (Item #: 183882, Ref: B1931) $33.30

Battery to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: B1932) $25.50

Battery to Starter Cable - This cable is 2/0 gauge measuring 36 inches (Item #: 184665, Ref: B1934) $53.00

Battery to Starter Cable - This cable is 2/0 gauge measuring 48 inches. (Item #: 117381, Ref: B1935) $34.60

Cable, Battery to Starter - This cable is 2 gauge measuring 8 inches. (Item #: 184847, Ref: B188) $17.30

Cable, Battery to Starter - This cable is 2 gauge measuring 12 inches. (Item #: 184028, Ref: B189) $15.80

Cable, Battery to Starter - This cable is 2 gauge measuring 18 inches. (Item #: 184391, Ref: B190) $19.80

Cable, Battery to Starter - This cable is 2 gauge measuring 36 inches. (Item #: 184406, Ref: B192) $24.60

Cable, Battery to Starter - This cable is 2 gauge measuring 48 inches. (Item #: 173479, Ref: B227) $37.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $48.60

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Item #: 140520, Ref: D5TE12029AB) $16.20

Coil Bracket - Universal Coil Bracket (Item #: 107072, Ref: R1940) $6.20

Coil, 12 Volt with Resistance - This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Item #: 105299, Ref: 189673M1) $18.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 192483, Ref: 40611) $70.00

Coil, High Performance (Black), 12 Volt, Oil Filled - Heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 105092, Ref: 40511) $38.00

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Item #: 182566, Ref: 40111) $69.00

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Item #: 125199, Ref: 40011) $29.00

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Item #: 182567, Ref: 40601) $79.00

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Item #: 182550, Ref: 40501) $71.00

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Item #: 182585, Ref: 40001) $31.98

Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 183385, Ref: 45111) $83.00

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 108304, Ref: 45011) $22.90

Coil, Ultra High Performance (Chrome), Oil Filled - Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Item #: 182456, Ref: 45001) $73.00

No
Picture
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Item #: 111468, Ref: 1904376) $14.40

Pulley - This single groove pulley is 0.920 inches wide, 3.200 inch outside diameter, 0.670 inch center, for 13mm (0.50 inch) Belt. This is as a universal part, please verify measurements before ordering. (Item #: 172973, Ref: R52159) $18.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/4-inch reach. Replace Autolite AL65. OEM 834236M1 and 157803A. NOTE: Verify spark plug type before ordering. (Item #: 172892, Ref: AL65) $4.40

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Item #: 130074, Ref: AL3076) $10.80

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.20

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. Copper core. (Item #: 107985, Ref: S2097) $19.70

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Item #: 108070, Ref: CPN12259EI) $20.00

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (�Mag Wire�) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Item #: 178803, Ref: S66465) $30.80

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Item #: 103156, Ref: SWS260) $20.30

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Item #: 103155, Ref: CPN12259) $16.60

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $18.70

Switch to Starter Cable - This cable is 2 gauge measuring 18 inches. (Item #: 184822, Ref: B194) $16.40

Switch to Starter Cable - This cable is 2 gauge measuring 24 inches. (Item #: 185368, Ref: B195) $15.80

Switch to Starter Cable - This cable is 2 gauge measuring 36 inches. (Item #: B196) $21.00

Switch to Starter Cable - This cable is 2/0 gauge measuring 18 inches. (Item #: 185109, Ref: B1938) $38.50

Switch to Starter Cable - This cable is 2/0 gauge measuring 24 inches. (Item #: 134614, Ref: B1939) $43.70

Switch to Starter Cable - This cable is 2/0 gauge measuring 36 inches. (Item #: 184663, Ref: B1940) $56.00

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $12.50

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories] [All 8N Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy