FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford NAA (Golden Jubilee) Parts

Category: Engine Gaskets

[Categories] [All NAA Parts] [All Ford Models]

Camshaft Cover Gasket - For Ford tractor models NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number C0NN6A250A, Engines: 134, 172 gas / diesel, (Item #: 150041) $7.90

Crankshaft Seal Kit, Rear - This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Item #: 182525, Ref: C0NN6701AKIT) $37.00

Crankshaft Seal, Front - This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Item #: 106273, Ref: EAA6700B) $6.60

Crankshaft Seal, Rear Pair - Comes in halves. 2 needed for complete seal. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. (Item #: 106274, Ref: C0NN6701A) $8.10

Front Crankshaft Wear Sleeve - This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Item #: 184669, Ref: RP301112) $68.00

$Ford NAA Head Gasket 134\172 Gas$
Head Gasket 134/172 Gas - Head Gasket, non-metallic used with 1/2 inch or 7/16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Item #: 155277, Ref: EAF6051D) $28.10

Head Gasket, 134CID Gas Engines - Head Gasket, metal clad with 7/16 inch or 1/2 inch head bolt holes. For: NAA, Jubilee, 600, 601, 700, 701, 2000, 4000 with 134 gas engines. (Item #: 182485, Ref: EAE6051DM) $35.80

No
Picture
Lower Gasket Set - Used on 134 CID and 172 CID gas or diesel engines. For tractor models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106345, Ref: CS3477) $71.00

Main Bearing Cap Packing Material, V-Style - For 134 and 173 CID Engines, 1953 to 1964. Sold individually. (Item #: 172567, Ref: B3NN6336A) $3.10

Oil Filter Inlet Tube Cover Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number B9NN6A628A, Oil filter inlet tube cover gasket, (Item #: 160106) $1.50

Oil Inlet Tube Seal - This part replaces Ford/ New Holland numbers 500391 and EAA6594A. It is used on Ford 4 cylinder tractors, 1953-1964. Models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040 (Item #: 155434) $0.60

Oil Pan Gasket - Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106281, Ref: EAF6710B) $7.50

Oil Pump Inlet Tube Flange Cover Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6626C, Inlet tube flange cover gasket, (Item #: 160105) $1.90

Oil Pump to Block Gasket - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6659A, Oil pump to block gasket, (Item #: 160104) $1.40

Overhaul Gasket Set - This Full Overhaul Gasket Set comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed for models NAA, Jubilee, 600, 700 (134 cubic inch engine). All with gas engines and 7/16 inch head bolts from 1953 to 1957. (Item #: 106275, Ref: CPN6008HM) $59.00

$Ford NAA Overhaul Gasket Set Less Head Gasket 134\172 Gas$
Overhaul Gasket Set Less Head Gasket 134/172 Gas - Comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Item #: 182454, Ref: CPN-FPN) $65.00

Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Item #: 165426, Ref: EAF6521D) $6.70

Pushrod Side Cover Grommet - Pushrod Side Cover Grommet. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Item #: 165425, Ref: C0NN6589A) $2.50

Seal - Hydraulic Pump Shaft Oil Seal. Inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For 2000, 4000, 600, 700, 800, 900, NAA. C5NN851A (Item #: 117609, Ref: NCA851A) $6.60

Timing Gear Front Cover Gasket - For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Item #: 172791, Ref: EAF6020B) $2.70

Upper Engine Gasket Set - Metal head gasket for 1/2 inch or 7/16 inch bolt holes. For tractors: NAA, 600, 700; 134 CID engine (1953-1957). (Item #: 185151, Ref: VGCPNM) $72.00

No
Picture
Upper Gasket Set - For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000 (s/n 1964-earlier), Replaces OEM number HGS6008H1, (Item #: 176532) $47.20

Valve Cover Stud Grommet - This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Item #: 178199, Ref: EAF6570A) $5.00

Valve Cover Vent Breather Gasket - This Gasket for the Valve Cover Vent Breather measures 2 3/4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Item #: 172956, Ref: EAF6863C) $1.50

Valve rocker arm cover gasket. - Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Item #: 128766, Ref: EAF6584C) $12.60

Universal Parts and Accessories
Category: Engine Gaskets

Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Item #: 184511, Ref: GSKCR116) $16.50

Gasket Material, Exhaust Manifold - 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Item #: 184499, Ref: GSKEM1228) $20.80

Gasket Paper, .0275 - .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Item #: 185040, Ref: GSKP1898) $49.40

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Item #: 183827, Ref: PRM16BR) $6.60

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Item #: 178143, Ref: PRM101BR) $10.40

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Gaskets

[Categories] [All NAA Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy