Balancer Gear - Left Hand - For Ford tractor models 4830, 5000, 5030, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6700, 6810, 7000, 7600, 7610, 7700, 7710, Replaces Ford OEM number 81874001, Fits Left Hand Side, 15.4 MM Wide, (Item #: 162574)$168.00
Balancer Gear - Right Hand - For Ford tractor models 4830, 5000, 5030, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6700, 6810, 7000, 7600, 7610, 7700, 7710, Replaces Ford OEM number 81873999, Fits Right Hand Side, 15.4 MM Wide, (Item #: 162573)$155.00
Camshaft - For 4-cylinder gas or diesel engine in tractors 5000 (1965 to 1975); 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981); 5610, 5900, 6610, 6710, 7710, (1981 to 1991). Industrial: 650, 6500, 750, 755, 755A, 7500, (1972 to 7-1987); 755B, (8-1987 to -); 655, 655A, (6-1985 to 10-1988). With 3/16 inch Keyway. Replaces C7NN6250B, E1TN6250AA, E6NN6250AA. (Item #: 150911, Ref: 87800353)$113.00
Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number C0NN7B442A, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 81805123, (Item #: 155502)$19.10
Clutch Disc - For Ford tractor models 5110, 5610, 5640, 6410, 6610, 6640, 6710, 6810, 7610, 7710, 7740, 7840, 8240 Replaces Ford OEM number E0NN7R000AA, E0NN7R000AB, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 83947188, 6.820" Major / 6.640" Minor Inner Diameter, 9.005" Outer Diameter, 0.180" Width, 80 Teeth, (Item #: 155515)$80.00
Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number E0NN7Z031AA, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS120, 7010, 8010, Replaces New Holland OEM number 83925696, (Item #: 155540)$11.90
Connecting Rod - This Connecting Rod replaces rods with casting numbers C9NN6205C, E1NN6205EA. Used on Ford / New Holland: TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700. Fits Ford Construction and Industrials A62, A66, 575, 750, 755. 1.625 Inch piston pin. Replaces original part numbers E1NN6205, C9NN6205C, E1NN6205EA, 87801220. (Item #: 128699, Ref: C9NN6205C)$85.00
Connecting Rod - Used on Turbo-Charged Engines with 1.625 Inch Piston Pins, this connecting rod replaces Ford, New Holland part numbers 81819490, 81864273, 81875652, 83947560, 83955929, 83959784, 83973859, 87770983, C9NN6200C, E4HN6200AC, E4NN6200BA, E4NN6200BB, E8NN6200AA, E9NN6200DA, F2NN6200EA. It is used on Turbo charged engines, 1969-1988. 7000, 7100, 7200, 7600, 7700, 7410, 7610, 7710, TW15, TW20, TW25, TW35, 9000, 9600, 9700, TW30, 8630, 8730, 8830, 9200, 276V, 9030E, 9030V, 276VII, 750, 755, 555C, 655C, A62, A66, 555D, 575D, 655D, 675D, 7500, 755A, 755B. Engines BSD442, BSD666T, BSD666TI, BSD444HT, and BSD444T (Item #: 128699, Ref: F2NN6200EA)$85.00
Connecting Rod Bolt - These Connecting Rod Bolts are for gas and diesel Models: 1965 and later: 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. 3 1/4 inches long, 7/16 diameter. Priced each. Uses 385279S2 nut, not included. (Item #: 114721, Ref: E4TN6214AA)$3.70
Connecting Rod, Remanufactured, E1NN6205 - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 575, 750, 755, Replaces Ford OEM number E1NN6205, C9NN6205C, E1NN6205EA, 1.625" Piston Pin Size, For a New version of this sku use Item #: 128699, (Item #: 210295)$119.01
Crankshaft - 4 cylinder, 4.2 inch stroke, 12.5 mm 78 tooth Balancer Gear. Uses 36 mm wide Rod Bearings. NOTE: Measure Balancer Drive Gear before ordering. Do not mix sizes. Used on 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Fits Ford Construction and Industrial (s) A62, 650, 655, 750, 5500, 5550, 7500. Replaces 81804029, C5NE6303K, F0NN6300FB (Item #: 100552, Ref: C5NE6303K)$794.05
Crankshaft - 76 Tooth Gear - Late - For Ford tractor models Super Major, 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 650, 655, 750, 5500, 5550, 7500, Compatible with Ford Engine (s) BSD442, 256, Replaces Ford OEM number 81804029, C5NE6303K, F0NN6300FB, Replaces Casting number 6110A, Engine: 256 CID - 4.2 Stroke, 4 Cylinder, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Balance Drive Gear: 76 Tooth Right Hand Helix, 15MM Wide - Installed, Snout: 1 Bolt Hole, 1 Keyway, Verify gear tooth count before ordering, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100553)$428.58
Crankshaft - 76 Tooth Gear - Late - For Ford tractor models 6000, 6600, 6610, 6700, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 7500, Compatible with Ford Engine (s) BSD444, 268, Replaces Ford OEM number E5NN6303DA, Replaces Casting number 1598N, D9NN6110AA, D9NN6303A, D9NN6303AA, E5NN6303CA, D5NN6303FA, Engine: BSD444, 268, 4 Cylinder, 4.4" Stroke, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Snout: 1 Bolt Hole, 1 Keyway, Teeth: 76 helix cut left to right if looking from rear, Verify gear tooth count before ordering, For a Remanufactured version of this sku use Item #: 205186, (Item #: 102101)$618.00
No Picture
Crankshaft - 76 Tooth Gear - Late, Remanufactured, E5NN6303DA, E5NN6303FA - For Ford tractor models 6600, 6610, 6700, 6710, 7610, 7710, Replaces Ford Casting number E5NN6303DA, E5NN6303FA, Engine: 268 after 9/4/86 with 4.4 stroke Teeth: 76 helix cut left to right if looking from rear, For a New version of this sku use Item #: 102101, (Item #: 205186)$590.01
No Picture
Crankshaft - 78 Tooth Gear - Early, Remanufactured, E5NN6303DA, D9NN6303AA - For Ford tractor models 6600, 6610, 6700, 6710, 7610, 7710, Replaces Ford OEM number E5NN6303DA, Replaces Casting number D9NN6303AA, D9NN6110AA, E5NN6303CA, D5NN6303FA, Engine: 268 before 9/4/86 with 4.4 stroke, Teeth: 78 helix cut left to right if looking from rear, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 102100, (Item #: 200179)$590.01
Crankshaft Balancer Assembly - For Ford tractor models 4830, 5030, 5110, 5600, 5610, 5900, 6500, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655A, 655C, 655D, 675D, 750, 755A, 755B, 7500, Replaces Ford OEM number F1NN6A311AA, E5NN6A311AA, 81873989, E3NN6A311AA, Teeth: 39, 5/8" wide gears, (Item #: 169723)$492.80
Crankshaft Pulley - Used on Ford / New equipment built 1965 and later. This is a single groove pulley. This pulley is not for Shibaura built compacts. Replaces D5NN6A312A, 83903583 (Item #: 154921, Ref: D5NN6A312A)$138.00
Crankshaft Pulley Spacer - Replace Ford part numbers F0NN6B306AA and 87800706, this space (collar) measures 44mm inside diameter, 60mm outside diameter and 21mm long. It is used on Ford / New Holland models: 345C, 345D, 545C, 545D, 555C, 555D, 555E, 575D, 575E, 650, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, 6640, 7740, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5610, 5610S, 5640, 5900, 6610, 6610S, 6710, 6810, 6810S, 7500, 7610, 7610S, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, 8530, 8630, 8730, 8830, 9030E, 9030V, L865, LB110, LB115, LB115.B, LB75.B, LB90, LS180, LS190, LX865, LX885, LX985, TB100, TB110, TB120, TB80, TB90, TS90, TS100, TS110, TS115, TW5, TW15, TW25, TW35 (Item #: 168951, Ref: F0NN6B306AA)$27.50
Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A)$20.40
No Picture
Crankshaft Pulley, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 3500, 3550, 4140, 4400, 4500, 5500, 5550, 6500, 7500 Replaces Ford OEM number D5NN6A312A, 83903583, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, Compatible with New Holland Skid Steer Loader(s) L783, L785, Compatible with New Holland Hay Cutting(s) 1118, 1499, Replaces New Holland OEM nos D5NN6A312A, For a new version of this item use Item #: 154921, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443383)$81.00
Crankshaft Repair Kit - Speedi Sleeve Crankshaft Repair Kit will sleeve the end of the crankshaft that has a wear groove worn by the crankshaft seal. Ultra thin sleeve slides over damaged crank. Allows the use of standard seal E5NN6701BA. For 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 106355, Ref: 99472)$173.00
Crankshaft, 4.4 In. Stroke, 4-Cyl - Fits 4 cylinder 268 CID engines with 4.4 inch stroke, balancer drive gear is 78 tooth (will not replace the 76 tooth). Uses 36 mm rod bearings (Bearings NOT included). For tractor models 6610, 6710, 7710. (Item #: 102100, Ref: D9NN6303AA)$634.00
No Picture
Crankshaft, Remanufactured, F1NN6300BD - For Ford tractor models 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 9030, Compatible with Ford Construction and industrial models 555C, 555D, 575D, 650, 655C, 655D, 675D, 750, 755, 755A, 755B, 7500, Compatible with Ford Engine (s) BSD442, BSD444 Replaces Ford Casting number F1NN6300BD, , Compatible with New Holland Hay Cutting (s) 1118, Replaces OEM number 81873979, 4.4" Stroke, Left Hand Helical Cut Gear, (Item #: 209964)$810.01
No Picture
Crankshaft, Remanufactured, F1NN6303AB - For Ford tractor models 5000, 6600, 6610, 6700, 6710, 7610, 7710, Replaces Casting number F1NN6303AB, F0NN6303A, F0NN6303DA, F1NN6303AA, Engine: 268 with 4.4 stroke, Teeth: 76 helix cut right to left if looking from rear, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 203839)$550.01
Cylinder Head with Valves, Remanufactured, C0NN6090C - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number C0NN6090C, C5NE6090B, C5NN6090B, C7NN6090AC, C7NN6090AL, C7NN6090N, C7NN6090T, C5NE6090E, C5NN6090L, Not a welded head, Ports: Intake - Square, Exhaust - Square, Cylinders: 4, 1/2" head bolts, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, Has two coolant ports on intake side of head - One between Cylinders 1 and 2 and second after cylinder 4 -Uses intake gasket 82845236 / C6NE9439A, (Item #: 204489)$1050.01
Cylinder Head with Valves, Remanufactured, D5NN6090L - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number D5NN6090L, D3NN6090E, D3NN6090L, D5NN6090E, Not a Welded Head, Ports: Intake - Round, Exhaust - Square, Cylinders: 4, 1/2" head bolt, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, 4 coolant ports on intake manifold side of head - Between all cylinders and after cylinder 4, Uses Ford intake gasket D9NN9439AA, E8NN9439BA, or 83964125, (Item #: 205177)$1050.01
No Picture
Cylinder Head, Remanufactured, C0NN6090C - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number C0NN6090C, C5NE6090B, C5NE6090E, C5NN6090B, C7NN6090AC, C7NN6090AL, C7NN6090N, C7NN6090T, C5NN6090L, Not a welded head, Ports: Intake - Square, Exhaust - Square, Cylinders 4, 1/2" head bolts, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, Has two coolant ports on intake side of head - One between Cylinders 1 and 2 and second after cylinder 4 -Uses intake gasket 82845236 / C6NE9439A, (Item #: 200152)$970.01
No Picture
Cylinder Head, Remanufactured, D3NN6090E - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number D3NN6090E, D3NN6090L, D5NN6090E, D5NN6090L, D9NN6090BA, Ports: Intake - Round, Exhaust - Square, Not a welded head, Cylinders 4, 1/2" head bolt, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, 4 coolant ports on intake manifold side of head - Between all cylinders and after cylinder 4, Uses Ford intake gasket D9NN9439AA, E8NN9439BA, or 83964125, (Item #: 200142)$520.01
No Picture
Cylinder Head, Remanufactured, E6NN6090AB - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number E6NN6090AB, 87800097, Ports: Intake - Square, Exhaust - Square, Cylinders: 4, 9/16" head bolts, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, 4 coolant ports on intake manifold side of head - Between all cylinders and after cylinder 4, Uses Ford intake gasket E6NN9439AB, For a Remanufactured version of this sku use Item #: 210686, (Item #: 210685)$520.01
Cylinder Head, Used - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine(s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number C0NN6090C, C5NE6090B, C5NE6090E, C5NN6090B, C7NN6090AC, C7NN6090AL, C7NN6090N, C7NN6090T, C5NN6090L, Ports: Intake - Square, Exhaust - Square, Cylinders: 4, 1/2" head bolts, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, Has two coolant ports on intake side of head, One between Cylinders 1 and 2 and second after cylinder 4, Uses intake gasket 82845236 - C6NE9439A, For a Remanufactured version of this part use Item #: 204489, (Item #: 400152)$321.01
No Picture
Cylinder Head, with Valves, Remanufactured, E6NN6090AB - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) 256 (Diesel), 268 (Diesel), Replaces Ford Casting number E6NN6090AB, 87800097, Ports: Intake - Round, Exhaust - Square, Cylinders: 4, 9/16" head bolts, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, 4 coolant ports on intake manifold side of head - Between all cylinders and after cylinder 4, Uses Ford intake gasket E6NN9439AB, For a Remanufactured version of this sku use Item #: 210685, (Item #: 210686)$1050.01
Engine Balancer - For 2000 3 cylinder gas, 3000 gas, 4000 3 cylinder gas, 5000 gas and diesel, 5600, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710. Replaces 87802137, D9NN6A311AD, 83924287. Used through 8/1986. 1/2 inch wide gears. (Item #: 168875, Ref: D9NN6A311AD)$393.00
No Picture
Exhaust Valve - .003" Oversize Stem - For Ford tractor models TW5, TW10, TW20, TW30, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7700, 7710, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Engine (s) 256, 256T, 268, 268T, 401, 401T, Replaces Ford OEM number D8NN6505BA, Replaces manufacturer number VPA1571, Size: .003" Oversized Stem, (Item #: 176472)$17.80
Ford, 87801220, New Holland, 3973859, Used - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 5610 (Turbo), 5900 (Turbo), 6410 (Turbo), 6610 (Turbo), 6710 (Turbo), 6810 (Turbo), 7000, 7100, 7200, 7410 (Turbo), 7600, 7610 (Turbo), 7700, 7710 (Turbo), 8630, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 555C (Turbo), 555D (Turbo), 575D (Turbo), 655C (Turbo), 655D (Turbo), 675D (Turbo), 750, 755, 755A, 755B, 7500 Replaces Ford OEM nos 87801220, F2NN6200EA, E9NN6200DA, E8NN6200AA, E4HN6200AC, E4NN6200BB, E4NN6200BA, C9NN6200C, , Compatible with New Holland Hay Cutting(s) 1118, Replaces New Holland OEM nos 3973859, 81875652, 81864273, 83973859, 83959784, 3959784, 3955929, 87770983, 502164, 83955929, 83947560, 81819490, Replaces Casting nos F2HN6205AA, Wrist Pin: 1 5/8", Tapered Wrist Pin Bushing End, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443995)$175.01
Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Item #: 173014, Ref: 390625S)$2.10
Front Engine Plate, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 8240, 8340, 9030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, 650, 655C, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, 256 Replaces Ford OEM nos E5NN6C044A, 83956700, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, 5610S, 6610S, 6640, 6810S, 7010, 7610S, 7740, 7840, 8010, 8340, Compatible with New Holland Skid Steer Loader(s) L781, L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1499 (s/n 540289-later), 2450 (s/n 606630-earlier), 2550 (s/n 606630-earlier), Replaces New Holland OEM nos E5NN6C044A, 83956700, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434395)$30.01
Gear Selector Arm - For Ford tractor models 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7810S, Replaces Ford OEM number C5NN7346A, E5NN7346AA, 83955498, (Item #: 161525)$60.00
No Picture
Gear Selector Arm, Used - For Ford tractor models 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7810S, Replaces Ford OEM number C5NN7346A, E5NN7346AA, 83955498, For a new version of this item use Item #: 161525, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436264)$38.01
Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Item #: 160935, Ref: E6NN8A614AB)$112.00
No Picture
Intake Valve - For Ford tractor models TW20, TW30, 7000, 7600, 7700, 7710, 9000, 9200, 9600, 9700, Compatible with Ford Engine (s) 256T, 268T, 401T, Replaces Ford OEM number D8NN6507BA, Replaces manufacturer number VPA1561, Size: .003", (Item #: 176483)$16.90
Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A)$0.80
Piston Pin Bushing - For Ford tractor models 7610, 7710, 8560, 8630, Compatible with Ford Construction and industrial models 575E, 675D, 675E, 755B, Compatible with Ford Engine (s) 268 (Diesel), 304 (Diesel), 401 (Diesel), 456 (Diesel) Replaces Ford OEM number E7HZ6207B, E6NN6207BA, , Compatible with New Holland tractor models TM125, TM135, TM150, TM165, TS100, TS110, 5610S, 6610S, 6810S, 7010, 7610S, 7740, 8670, 8670A, 8770, 8770A, Compatible with New Holland Combine (s) TR88, Compatible with New Holland Construction and industrial models LB115, Compatible with New Holland Hay Cutting (s) HW340, 1118, 2550, Replaces New Holland OEM number 87840994, 1.625" pin, straight, (Item #: 167314)$3.98
Power Cylinder End - Cylinder End, for Power Steering Cylinder, Left End. 3 11/16 inches from center of ball joint to end, 7/8 inch-18 female thread, For tractor models 5700, 6700, 6710, 7700, 7710, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 83904282, 83934991, 83959499, D5NN3B539C, D8NN3B539AA, D8NN3B539AB (Item #: 104656, Ref: D8NN3B539AB)$53.00
Push Rod - For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 7610, 7710, 334, 335, 530A. All with 3 or 4 cylinder Diesel from 1981 to 10/1991. Push Rod is 12.17 inches long. (Item #: 165225, Ref: C5NE6567B)$5.60
Push Rod, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 5500, 5550, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM nos 81813399, , Compatible with New Holland Skid Steer Loader(s) L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1118, 1499 Replaces New Holland OEM nos 81813399, , Compatible with Versatile Hay Cutting(s) 4750, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443449)$3.86
Rear Engine Seal Retainer - Used Ford / New Holland engines BSD442, BSD444, BSD444T, BSD666, BSD666T on equipment 1975 and later. The retainer is used with E5NN6701BA crankshaft seal and E9NN6N305AB gasket, sold separately. This part replaces original part numbers E5HN6N306AB, E5HN6N306AC, 81868536 (Item #: 168950, Ref: E5HN6N306AB)$162.00
Ring Gear, Flywheel - This ring gear measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For gas and diesel models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA)$39.00
Rocker Arm Screw - Used on Ford Tractors, 1955 and later, this screw replaces E7NN6549AA, 83963749, 87801302 (Item #: 131473)$47.00
Seal Retainer Plate, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 555, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM nos E5HN6N306AC, , Compatible with New Holland Combine(s) TR86, TR87, TR96, TR97, TX36, Compatible with New Holland Skid Steer Loader(s) L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Bale Movers(s) 1078, 1079, 1085, Compatible with New Holland Hay Cutting(s) 1118, 1499, Compatible with Versatile Hay Cutting(s) 4750, No Holes in bottom of seal, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434438)$31.01
No Picture
Short Block Engine - Ford 268, 268T - For Ford tractor models 7600, 7610, 7700, 7710, Compatible with Ford Engine (s) BSD444, BSD444T, 268, 268T, Replaces Ford OEM number 81873677, Bore Size: 4.4", Cylinders: 4, Type: Turbo and Non Turbo, Crankshaft Gear: 76 teeth, 15.4mm balancer gear, Cylinder Head Bolt Size: 9/16" UNC, Includes: Cylinder Kit, Crankshaft, Rod and Main Bearings, Connecting Rods, Camshaft, and Engine Block, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 135061)$3599.01
Valve Lifter, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2610, 2810, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8160, 8200, 8210, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 550, 555, 555E, 575E, 655, 655E, 675E, Compatible with Ford Engine(s) BSD326, BSD329, BSD332, BSD333, BSD442, BSD442T, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number C7NN6500B, C5NE6500C2, 83946434, E4HN6500AA, 83957729, C5NE6500C, , Compatible with New Holland tractor models TB90, TB100, TB110, TB120, TS80, TS90, 7010, 8010, 8240, For a new version of this item use Item #: 112190, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435585)$4.76
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
No Picture
Valve Service Kit - For tractor models 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Contains: springs and locks, (no valves). (Item #: VSKF233)$44.16
Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Item #: 166305, Ref: D6NN6513A)$3.10
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
