2nd Speed Mainshaft Gear, Used - For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2120, 2130, 2131, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 7530, Compatible with Ford Construction and industrial models 2030, 3550, 4040, Replaces Ford OEM number B9NN7A381B, Replaces Ford Casting nos 8N7101B, 8N7114B, Teeth: 56, Splines: 17, 3 and 4 Cylinder Tractors with 4 Speed Transmission, For a new version of this item use Item #: 108536, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435402)$72.01
No Picture
Bare Block, Remanufactured, FO - For Ford tractor models 2N, 8N (s/n 263844-earlier), 9N, Replaces Ford Casting number FO, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204677)$930.01
Camshaft - Fits 8N serial number 263843 and greater using SIDE Mount Distributor. (Item #: 160974, Ref: 8N6250)$190.00
Camshaft Kit, Side Mount Distributor Engine - This camshaft uses a bolt on style camshaft gear. This kit includes: Camshaft with Distributor Gear and Lifters. For 8N with Side Mount Distributor (Item #: 184795, Ref: R0885K)$330.37
Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Item #: 183734, Ref: 7HA-6212)$1.90
Crankshaft - New kit with bearings. For tractor models 8N, 9N, 2N with Standard Rod and Main Bearings. (Item #: 184880, Ref: 9N6303ACK)$891.00
Crankshaft - For tractor models 9N, 8N, 2N. Does not include bearings. (Item #: 100549, Ref: 9N6303A)$440.00
Crankshaft Cranking Ratchet - The ratchet nut fits into the nose of the crankshaft. The hand crank fits into the end of the ratchet to turn the engine over. Replaces original part number 2N6319A1 (Item #: 182475, Ref: 2N6319A1)$16.10
Crankshaft Pulley - This Crankshaft Pulley for models 8N, 9N, and 2N. Used with attaching a screw type hub for a front mounted hydraulic pump. Crankshaft mounting is 1.63 inch outside diameter and 1.18 inch inside diameter and has four 1/4 inch -20 threaded holes. Can be used as a regular crankshaft pulley without attaching a hub for a front mounted hydraulic pump. Replaces 2N6312. Used with part numbers 192161 and 194354. (Item #: 108783, Ref: 192160)$44.00
Crankshaft Pulley - This crankshaft pulley is for models 8N, 9N, 2N tractors. Used with a pin style hub, supplied with four rubber bushings for hubs with 13/32 pins when being used with Front Mounted Hydraulic Pump. (Item #: 172929, Ref: 192152)$92.90
Crankshaft, Remanufactured, 9N6303A - For Ford tractor models 2N, 8N, 9N (all gas), Replaces Casting number 9N6303A, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 100549, Additional Handling and Oversize Fees Apply To This Item, (Item #: 200169)$405.01
Cylinder Head - For 8N, 9N, 2N. All GAS 1939-1952. Cylinder Head. Replaces 8N6050, 8N6050A, 9N6050 (Item #: 121814, Ref: 8N6050A)$220.00
Cylinder Head Bolt - These bolts are 7/16 in diameter and 3 inches long. For 8N, 9N, 2N. 18 are used per tractor. Replaces 8N6065A (Item #: 135049, Ref: F8N6065A)$9.10
Cylinder Head Stud - Studs are 7/16 in diameter and 3 inches long (threads: coarse 7/16-14 fine 7/16-20). For 8N, 9N, 2N. 18 are used per tractor. Priced each. (Item #: 182477, Ref: 8N6065A)$6.00
No Picture
Cylinder Head, Remanufactured, 2N6050 - For Ford tractor models 2N, 8N, 9N, Replaces Ford Casting number 2N6050, 2NC6050, All with Side Mount Distributor, Our remanufactured cylinder heads are reconditioned and ready for assembly, Cleaned and tested for cracks, For a New version of this sku use Item #: 121814, (Item #: 203871)$136.01
No Picture
Cylinder Head, Remanufactured, 8N6050, 9N6050 - For Ford tractor models 2N, 8N, 9N, Replaces Ford Casting number 8N6050, 9N6050, All with Front Mount Distributor, Our remanufactured cylinder heads are Cleaned and tested for cracks, For a New version of this sku use Item #: 121814, (Item #: 210443)$184.01
Cylinder Head, Used - For Ford tractor model 8N (Late), Replaces Ford Casting number 8N6050, Casting No. 8N6050, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, Used on engines with side mount distributer, For a new version of this item use Item #: 203871, (Item #: 407131)$140.01
NOTE
Distributors and Distributor Parts - These are located in the Electrical System parts section.
NOTE
Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Item #: 179185, Ref: 350645S)$27.10
Governor - This Two arm type Governor Assembly with gasket. Will not replace 3 arm, ensure your old governor is 2 arm type. (Item #: 105389, Ref: 8N18204B)$219.98
No Picture
Governor Ball - Fits 9N, 2N and 8N. 5/8 inch diameter ball. 4 used per tractor. Replaces 358081S. (Item #: 178097, Ref: 358081S)$0.90
Governor Centrifugal Assembly - Governor Internal Centrifugal Assembly. Fits 9N18200C or 8N18204B above, for 8N, 9N, 2N (1939 thru 1952). If your tractor has the proofmeter you will need to also purchase a roll pin at a local hardware store (0.314" O.D. x 0.750" Long) to drive the cable. (Item #: 105391, Ref: 9N8N18179CA)$129.00
Governor Compensating Spring - 4.95 inches in length. For model 8N. (Item #: 178054, Ref: 8N9827)$8.00
Governor Driveshaft Ball Stop Shim - This Governor Driveshaft Ball Stop Shim is 0.010 inches thick. It is used on 9N, 2N and 8N Governors. Replaces 9N18241. (Item #: 179807, Ref: 9N18241)$0.80
Governor Dust Seal - Replacement Governor Dust Seal. For tractor models 8N, 9N, 2N. (Item #: 169249, Ref: 9N18183)$8.50
Governor Housing - Governor Housing includes needle bearing, lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 8N, 9N, 2N tractors built 1939 thru 1952. (Item #: 179209, Ref: 8N18085)$196.00
Governor Lever Spring - This Governor Lever Spring will fit tractor models 9N, 2N, 8N. (Item #: 178196, Ref: 9N18196)$8.10
Governor Repair Kit, Complete - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or without proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5/8 inch), bushings, mounting gasket, dust seal, C-clip. (Item #: 105392, Ref: CAPN12502A)$257.71
Governor Shaft - Shaft Assembly, with or without proofmeter. For 8N, 9N, 2N. (Item #: 179265, Ref: 9N8N18187A)$72.00
Governor Thrust Bearing - This Governor Thrust Bearing is used on Ford 9N, 2N and 8N tractors, 1939-1952. It replaces original part number 9N18192 (Item #: 179808, Ref: 9N18192)$3.00
Governor Upper Race Assembly - Upper Race Assembly. For 8N, 9N, 2N. Replaces original part number 9N18188B. (Item #: 179423, Ref: 9N18188B)$90.00
Hand Starting Crank - 8N, 9N, 2N Hand Starting Crank WITHOUT Spinner. Replaces 9N17040 and 2N178040A (Item #: 111921, Ref: 351010R31)$50.00
Main Shaft Gear, Used - For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140, Replaces Ford OEM nos 8N7110, 4th Gear, Teeth: 39, Splines: 17, Inside Diameter: 1.783", Outside Diameter: 5.119", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436813)$95.01
NOTE
Piston Rings - These are located in the ENGINE RINGS category.
NOTE
No Picture
Pistons and Sleeves - Pistons and Sleeves are located in the "Pistons and Sleeves category" Use your "BACK" key and select this category. (Item #: Various)$107.00
R Seal Retainer - Retainer, for Rear Crankshaft Oil Seal. For tractor models 8N, 9N, 2N. Replaces 8N6335A (Item #: 111281, Ref: 91A6335)$11.20
No Picture
Remanufactured Bare Block, Remanufactured, FO - For Ford tractor model 8N, Replaces Ford Casting number FO, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204017)$1050.01
Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 beveled teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Item #: 110232, Ref: 9N6384)$27.00
Rotating Valve Conversion Kit - Convert regular exhaust valves to the rotating type. For 8N, 9N, 2N - Kit contains (8) A0NN6500A adjustable tappets, (4) 8N6534B valve rotator kits, (4) 8N6505C exhaust valves, (8) EAM6518A valve locks. Does not include tappet wrenches. (Item #: 131643, Ref: 8N6546B)$333.00
Timing Gear Cover - This Timing Gear Cover is for an 8N with Side Mount Distributor. (Item #: 111252, Ref: 8N6019B)$136.00
Timing Gear, Camshaft - This Bolt-on type Aluminum Camshafts fits 8N, 9N, 2N thru 1952. (Item #: 121560, Ref: 7RA6256)$89.00
Timing Gear, Crankshaft - This Crankshaft Timing Gear replaces original part numbers: 48-6306, 48-6306A, 486306A . For tractor models 8N, 9N, 2N. 22 teeth. (Item #: 121562, Ref: 486306A)$50.00
No Picture
Transmission Countershaft, Used - For Ford tractor model 8N, Replaces Ford OEM number 8N7111, For a new version of this item use Item #: 108538, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435404)$93.51
Transmission Gear - 3rd, Used - For Ford tractor models NAA, 8N, 501, 541, 600, 620, 621, 630, 631, 640, 641, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4000SU, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Replaces Ford OEM number 8N7102, Teeth: 28 and 52, For a new version of this item use Item #: 172982, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459492)$134.01
Valve Guide - Single Valve Guide. For 8N, 9N, 2N. (Item #: 108113, Ref: 8BA6510B)$6.00
Valve Guide Retainer - 120 CID 4 cylinder gas engines. For 8N, 9N, 2N. Sold individually. 8 used per engine. (Item #: 178042, Ref: 40-6512)$1.50
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Item #: 107088, Ref: 7HA6518)$0.60
Valve Key, Rotating Exhaust - Single valve key. 120 CID 4 cylinder gas engine. Valve Key for FREE ROTATING Exhaust Valves. For tractor models 8N, 9N, 2N. (Item #: 166558, Ref: EAM6518A)$0.98
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Valve Rotator Assembly - Valve Rotator Kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves. 4 used per engine. (Item #: 178973, Ref: 8N6534B)$13.40
Valve Seat, Exhaust - These Valve Seats are the Nickel Series which are made for all new fuel blends. For tractor models 8N, 9N, 2N. 1.348 inch outside diameter. (Item #: 178189, Ref: 218-7405)$13.90
Valve Service Kit - Contains: 8 valve springs, 8 valve guides-solid type and 16 valve locks. For 8N, 9N, 2N. (Item #: 184398, Ref: VSKF928N)$146.00
Valve Spring Retainer - These Valve Spring Retainers are for intake and exhaust for the 120 cubic inch, 4 cylinder gas engines. NOT for free type exhaust valve. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 retainer. Replace 8RT6514B 8 per engine. (Item #: 108114, Ref: 8BA6514)$3.00
Valve Spring with 1 Piece Guides - Sold individually, this valve spring is for the 120 CID 4 cylinder gas engine in the 9N, 2N and 8N. For use with Solid Valve Guides. (Item #: 172904, Ref: 8N6513)$2.30
Valve Spring with Split Guides - Sold individually, these valve springs are for120 CID 4 cylinder gas engine. Valve spring for use with split guides. For 8N, 9N, 2N. (Item #: 172904, Ref: 2NC6513)$2.30
Valve Stem Seal - Valve Stem Seal for valve guide in 120 CID 4 cylinder gas engine. For 8N, 9N, 2N. Priced each. 4 used per tractor. (Item #: 166703, Ref: 8BA6571)$0.60
Valve Tappet - ADJUSTABLE Tappet. Fits 8N, 9N, 2N. Note: Quantity 8 used in engine. Priced each. If you order 1, you will receive 1 tappet. (Item #: 128660, Ref: A0NN6500A)$14.00
Valve Tappet Wrench Set - For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. Wrenches to adjust 91A tappets. Replaces 8WR1770, 8WR1770, T-6500-PR. Also used on Ford F-Series Trucks 1948-1953 and Ford Cars 1949-1951. (Item #: 113941, Ref: 8WR1770)$9.98
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
