FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 1841 Parts

Category: Fuel System / Air Intake

[Categories] [All 1841 Parts] [All Ford Models]

Adjustable Needle Assembly - 3/8 inch x 24 thread. Main Adjusting Needle. For tractor models: 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 1958 to 1964 with 172 cubic inch engines with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. Replaces 311605. (Item #: 108463, Ref: C3NN9G504A) $25.90

Air Cleaner Clamp - Air cleaner oil cup clamp 4 1/2 inches. For tractor models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, NAB. (Item #: 111916, Ref: 311508) $15.10

Air Cleaner Oil Cup, Inner - Fits Oil Cup 311510 4-3/8 inch inside diameter. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Item #: 112021, Ref: 311506) $12.00

Air Cleaner Tube - Metal Tube is 90 degree with 2 inch outside diameter. For gas and LP models: 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4000 4 cylinder, 4030, 4040, 4121, 4130, 4131, 4140. All 1958 and up. Replaces: 86531351, 311092. (Item #: 126389, Ref: 311092) $38.70

Carburetor - This is a new Original Marvel-Schebler Design carburetor. It Replaces carburetors marked TSX662, TSX769, TSX813 or TSX977. Center to center on the 2 mounting bolts is 2 11/16 inches. Fuel inlet is 7/16 inches. Note, TSX813 and TSX662 use 3/8 inch fuel bolt. If replacing one original TSX813 or TSX662, you will need to replace your sediment bowl and your banjo bolt to 7/16. Used on Ford 172 Gas Engines 1957 - 1964. Replaces Ford / New Holland numbers: 310015, 312955, C0NN9510C, C0NN9510G (Item #: 184573, Ref: TSX813) $377.00

Foot Throttle Rubber Bumpers - These bumpers are used on Ford Industrial Tractors built between 1958 and 1964 with foot control throttle. (Item #: 182913, Ref: 372117-KIT) $8.60

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inch edge of tang to edge of tang, vented, includes gasket. For tractor models 8N, 9N, 2N, NAA, NAB, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Item #: 184806, Ref: C5NN9030D) $9.00

Fuel Filter Valve Stem to Carb Body Gasket - 0.443 inch inside diameter x 0.600 inch outside diameter x 0.047 inch thick. Fiber gasket. For tractor models 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140 (172 cubic inch gas engine with serial number 126525 and up), (6000 gas late 9/1960 and up). (Item #: 173184, Ref: NCA99180A) $1.50

Fuel Line - Measures 1/4 inch diameter. Line, 15-1/2 inches long. For use with Fuel Valve part number 311292WOR on the following models with 172 cubic inch gas engines from serial number 11977 to 126524: (some 801), 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881. (Item #: 157764, Ref: 310918) $69.00

Injection Line, Cylinder 1 - For 4 cylinder models all built after 1-1-1958. Replaces 500734. (Item #: 162804, Ref: C0NN9A555E) $34.70

No
Picture
Injection Line, Cylinder 2 - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500736. (Item #: 162805, Ref: C0NJN9A556E_) $34.90

Injection Line, Cylinder 2 - For 4 cylinder models built after 1-1-1958. Replaces 500738. (Item #: 162805, Ref: C0NN9A556E) $34.90

Injection Line, Cylinder 3 - For 4 cylinder models all built after 1-1-1958. Replaces 500738. (Item #: 162806, Ref: C0NN9A557E) $34.80

No
Picture
Injection Line, Cylinder 4 - For 4 cylinder models all built after 1-1-1958. Replaces 500740. (Item #: 162807, Ref: C0NN9A558E_) $35.10

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with Oil Bath Air Cleaner), (532 Diesel with Oil Bath Air Cleaner ), (6000 Gas/Diesel with Oil Bath Air Cleaner). Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $85.65

$Ford 1841 Sediment Bowl Retaining Bolt 7\16 Dia.$
Sediment Bowl Retaining Bolt 7/16 Dia. - Banjo Bolt. Length is 1 1/2 with 7/16-20NF threads. Fits 4000 4 cylinder, 801, 901, 1801 (1960 to 1964 with 172 cubic inch gas engine serial number 126525 and up), and 6000. If you need a gasket for this bolt, order 2 of part number NCA99180A. (Item #: 126816, Ref: C0NN9A349B) $16.90

Throttle Bellcrank Friction Disc Spring Washer - 2-7/16 inch diameter, 7/16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Item #: 178048, Ref: NAA99778B) $14.70

Throttle Control Rod - 4-1/2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2111, 2120, 2030, 2130, 4000, 4030, 4040, 4121, 4130, 4140 1953 thru 1964 gas only. Replaces C0NN9A790A. (Item #: 179893, Ref: NAA9815F) $25.30

Throttle Control Rod - Governor to Carburetor, Clevis End is not included. For tractor models: 2000 4 Cylinder, 4000 4 Cylinder, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-Cylinder Gas 1953 thru 1964. Replaces 86552618. (Item #: 153500, Ref: EAF9818C) $16.00

Universal Parts and Accessories
Category: Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $12.70

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $18.80

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.80

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $118.32

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.40

$Ford 1841 Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.40

$Ford 1841 Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $8.20

$Ford 1841 Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $6.80

$Ford 1841 Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.90

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $69.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $112.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.10

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.20

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $57.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $21.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $32.00

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $11.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All 1841 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy